diff options
Diffstat (limited to 'kernel/drivers/i2c/i2c-core.c')
| -rw-r--r-- | kernel/drivers/i2c/i2c-core.c | 2964 |
1 files changed, 2964 insertions, 0 deletions
diff --git a/kernel/drivers/i2c/i2c-core.c b/kernel/drivers/i2c/i2c-core.c new file mode 100644 index 000000000..987c12443 --- /dev/null +++ b/kernel/drivers/i2c/i2c-core.c @@ -0,0 +1,2964 @@ +/* i2c-core.c - a device driver for the iic-bus interface */ +/* ------------------------------------------------------------------------- */ +/* Copyright (C) 1995-99 Simon G. Vogl + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. */ +/* ------------------------------------------------------------------------- */ + +/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>. + All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl> + SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and + Jean Delvare <jdelvare@suse.de> + Mux support by Rodolfo Giometti <giometti@enneenne.com> and + Michael Lawnick <michael.lawnick.ext@nsn.com> + OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de> + (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and + (c) 2013 Wolfram Sang <wsa@the-dreams.de> + I2C ACPI code Copyright (C) 2014 Intel Corp + Author: Lan Tianyu <tianyu.lan@intel.com> + I2C slave support (c) 2014 by Wolfram Sang <wsa@sang-engineering.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/idr.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/clk/clk-conf.h> +#include <linux/completion.h> +#include <linux/hardirq.h> +#include <linux/irqflags.h> +#include <linux/rwsem.h> +#include <linux/pm_runtime.h> +#include <linux/pm_domain.h> +#include <linux/acpi.h> +#include <linux/jump_label.h> +#include <asm/uaccess.h> +#include <linux/err.h> + +#include "i2c-core.h" + +#define CREATE_TRACE_POINTS +#include <trace/events/i2c.h> + +/* core_lock protects i2c_adapter_idr, and guarantees + that device detection, deletion of detected devices, and attach_adapter + calls are serialized */ +static DEFINE_MUTEX(core_lock); +static DEFINE_IDR(i2c_adapter_idr); + +static struct device_type i2c_client_type; +static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver); + +static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE; + +void i2c_transfer_trace_reg(void) +{ + static_key_slow_inc(&i2c_trace_msg); +} + +void i2c_transfer_trace_unreg(void) +{ + static_key_slow_dec(&i2c_trace_msg); +} + +#if defined(CONFIG_ACPI) +struct acpi_i2c_handler_data { + struct acpi_connection_info info; + struct i2c_adapter *adapter; +}; + +struct gsb_buffer { + u8 status; + u8 len; + union { + u16 wdata; + u8 bdata; + u8 data[0]; + }; +} __packed; + +static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data) +{ + struct i2c_board_info *info = data; + + if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { + struct acpi_resource_i2c_serialbus *sb; + + sb = &ares->data.i2c_serial_bus; + if (!info->addr && sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { + info->addr = sb->slave_address; + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + info->flags |= I2C_CLIENT_TEN; + } + } else if (info->irq < 0) { + struct resource r; + + if (acpi_dev_resource_interrupt(ares, 0, &r)) + info->irq = r.start; + } + + /* Tell the ACPI core to skip this resource */ + return 1; +} + +static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct i2c_adapter *adapter = data; + struct list_head resource_list; + struct i2c_board_info info; + struct acpi_device *adev; + int ret; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + if (acpi_bus_get_status(adev) || !adev->status.present) + return AE_OK; + + memset(&info, 0, sizeof(info)); + info.fwnode = acpi_fwnode_handle(adev); + info.irq = -1; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, + acpi_i2c_add_resource, &info); + acpi_dev_free_resource_list(&resource_list); + + if (ret < 0 || !info.addr) + return AE_OK; + + adev->power.flags.ignore_parent = true; + strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type)); + if (!i2c_new_device(adapter, &info)) { + adev->power.flags.ignore_parent = false; + dev_err(&adapter->dev, + "failed to add I2C device %s from ACPI\n", + dev_name(&adev->dev)); + } + + return AE_OK; +} + +/** + * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter + * @adap: pointer to adapter + * + * Enumerate all I2C slave devices behind this adapter by walking the ACPI + * namespace. When a device is found it will be added to the Linux device + * model and bound to the corresponding ACPI handle. + */ +static void acpi_i2c_register_devices(struct i2c_adapter *adap) +{ + acpi_handle handle; + acpi_status status; + + if (!adap->dev.parent) + return; + + handle = ACPI_HANDLE(adap->dev.parent); + if (!handle) + return; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, + acpi_i2c_add_device, NULL, + adap, NULL); + if (ACPI_FAILURE(status)) + dev_warn(&adap->dev, "failed to enumerate I2C slaves\n"); +} + +#else /* CONFIG_ACPI */ +static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { } +#endif /* CONFIG_ACPI */ + +#ifdef CONFIG_ACPI_I2C_OPREGION +static int acpi_gsb_i2c_read_bytes(struct i2c_client *client, + u8 cmd, u8 *data, u8 data_len) +{ + + struct i2c_msg msgs[2]; + int ret; + u8 *buffer; + + buffer = kzalloc(data_len, GFP_KERNEL); + if (!buffer) + return AE_NO_MEMORY; + + msgs[0].addr = client->addr; + msgs[0].flags = client->flags; + msgs[0].len = 1; + msgs[0].buf = &cmd; + + msgs[1].addr = client->addr; + msgs[1].flags = client->flags | I2C_M_RD; + msgs[1].len = data_len; + msgs[1].buf = buffer; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + dev_err(&client->adapter->dev, "i2c read failed\n"); + else + memcpy(data, buffer, data_len); + + kfree(buffer); + return ret; +} + +static int acpi_gsb_i2c_write_bytes(struct i2c_client *client, + u8 cmd, u8 *data, u8 data_len) +{ + + struct i2c_msg msgs[1]; + u8 *buffer; + int ret = AE_OK; + + buffer = kzalloc(data_len + 1, GFP_KERNEL); + if (!buffer) + return AE_NO_MEMORY; + + buffer[0] = cmd; + memcpy(buffer + 1, data, data_len); + + msgs[0].addr = client->addr; + msgs[0].flags = client->flags; + msgs[0].len = data_len + 1; + msgs[0].buf = buffer; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + dev_err(&client->adapter->dev, "i2c write failed\n"); + + kfree(buffer); + return ret; +} + +static acpi_status +acpi_i2c_space_handler(u32 function, acpi_physical_address command, + u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + struct gsb_buffer *gsb = (struct gsb_buffer *)value64; + struct acpi_i2c_handler_data *data = handler_context; + struct acpi_connection_info *info = &data->info; + struct acpi_resource_i2c_serialbus *sb; + struct i2c_adapter *adapter = data->adapter; + struct i2c_client client; + struct acpi_resource *ares; + u32 accessor_type = function >> 16; + u8 action = function & ACPI_IO_MASK; + acpi_status ret; + int status; + + ret = acpi_buffer_to_resource(info->connection, info->length, &ares); + if (ACPI_FAILURE(ret)) + return ret; + + if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) { + ret = AE_BAD_PARAMETER; + goto err; + } + + sb = &ares->data.i2c_serial_bus; + if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) { + ret = AE_BAD_PARAMETER; + goto err; + } + + memset(&client, 0, sizeof(client)); + client.adapter = adapter; + client.addr = sb->slave_address; + client.flags = 0; + + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + client.flags |= I2C_CLIENT_TEN; + + switch (accessor_type) { + case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV: + if (action == ACPI_READ) { + status = i2c_smbus_read_byte(&client); + if (status >= 0) { + gsb->bdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_byte(&client, gsb->bdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_BYTE: + if (action == ACPI_READ) { + status = i2c_smbus_read_byte_data(&client, command); + if (status >= 0) { + gsb->bdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_byte_data(&client, command, + gsb->bdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_WORD: + if (action == ACPI_READ) { + status = i2c_smbus_read_word_data(&client, command); + if (status >= 0) { + gsb->wdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_word_data(&client, command, + gsb->wdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_BLOCK: + if (action == ACPI_READ) { + status = i2c_smbus_read_block_data(&client, command, + gsb->data); + if (status >= 0) { + gsb->len = status; + status = 0; + } + } else { + status = i2c_smbus_write_block_data(&client, command, + gsb->len, gsb->data); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE: + if (action == ACPI_READ) { + status = acpi_gsb_i2c_read_bytes(&client, command, + gsb->data, info->access_length); + if (status > 0) + status = 0; + } else { + status = acpi_gsb_i2c_write_bytes(&client, command, + gsb->data, info->access_length); + } + break; + + default: + pr_info("protocol(0x%02x) is not supported.\n", accessor_type); + ret = AE_BAD_PARAMETER; + goto err; + } + + gsb->status = status; + + err: + ACPI_FREE(ares); + return ret; +} + + +static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter) +{ + acpi_handle handle; + struct acpi_i2c_handler_data *data; + acpi_status status; + + if (!adapter->dev.parent) + return -ENODEV; + + handle = ACPI_HANDLE(adapter->dev.parent); + + if (!handle) + return -ENODEV; + + data = kzalloc(sizeof(struct acpi_i2c_handler_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->adapter = adapter; + status = acpi_bus_attach_private_data(handle, (void *)data); + if (ACPI_FAILURE(status)) { + kfree(data); + return -ENOMEM; + } + + status = acpi_install_address_space_handler(handle, + ACPI_ADR_SPACE_GSBUS, + &acpi_i2c_space_handler, + NULL, + data); + if (ACPI_FAILURE(status)) { + dev_err(&adapter->dev, "Error installing i2c space handler\n"); + acpi_bus_detach_private_data(handle); + kfree(data); + return -ENOMEM; + } + + acpi_walk_dep_device_list(handle); + return 0; +} + +static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter) +{ + acpi_handle handle; + struct acpi_i2c_handler_data *data; + acpi_status status; + + if (!adapter->dev.parent) + return; + + handle = ACPI_HANDLE(adapter->dev.parent); + + if (!handle) + return; + + acpi_remove_address_space_handler(handle, + ACPI_ADR_SPACE_GSBUS, + &acpi_i2c_space_handler); + + status = acpi_bus_get_private_data(handle, (void **)&data); + if (ACPI_SUCCESS(status)) + kfree(data); + + acpi_bus_detach_private_data(handle); +} +#else /* CONFIG_ACPI_I2C_OPREGION */ +static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter) +{ } + +static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter) +{ return 0; } +#endif /* CONFIG_ACPI_I2C_OPREGION */ + +/* ------------------------------------------------------------------------- */ + +static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id, + const struct i2c_client *client) +{ + while (id->name[0]) { + if (strcmp(client->name, id->name) == 0) + return id; + id++; + } + return NULL; +} + +static int i2c_device_match(struct device *dev, struct device_driver *drv) +{ + struct i2c_client *client = i2c_verify_client(dev); + struct i2c_driver *driver; + + if (!client) + return 0; + + /* Attempt an OF style match */ + if (of_driver_match_device(dev, drv)) + return 1; + + /* Then ACPI style match */ + if (acpi_driver_match_device(dev, drv)) + return 1; + + driver = to_i2c_driver(drv); + /* match on an id table if there is one */ + if (driver->id_table) + return i2c_match_id(driver->id_table, client) != NULL; + + return 0; +} + + +/* uevent helps with hotplug: modprobe -q $(MODALIAS) */ +static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct i2c_client *client = to_i2c_client(dev); + int rc; + + rc = acpi_device_uevent_modalias(dev, env); + if (rc != -ENODEV) + return rc; + + if (add_uevent_var(env, "MODALIAS=%s%s", + I2C_MODULE_PREFIX, client->name)) + return -ENOMEM; + dev_dbg(dev, "uevent\n"); + return 0; +} + +/* i2c bus recovery routines */ +static int get_scl_gpio_value(struct i2c_adapter *adap) +{ + return gpio_get_value(adap->bus_recovery_info->scl_gpio); +} + +static void set_scl_gpio_value(struct i2c_adapter *adap, int val) +{ + gpio_set_value(adap->bus_recovery_info->scl_gpio, val); +} + +static int get_sda_gpio_value(struct i2c_adapter *adap) +{ + return gpio_get_value(adap->bus_recovery_info->sda_gpio); +} + +static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap) +{ + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + struct device *dev = &adap->dev; + int ret = 0; + + ret = gpio_request_one(bri->scl_gpio, GPIOF_OPEN_DRAIN | + GPIOF_OUT_INIT_HIGH, "i2c-scl"); + if (ret) { + dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio); + return ret; + } + + if (bri->get_sda) { + if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) { + /* work without SDA polling */ + dev_warn(dev, "Can't get SDA gpio: %d. Not using SDA polling\n", + bri->sda_gpio); + bri->get_sda = NULL; + } + } + + return ret; +} + +static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap) +{ + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + + if (bri->get_sda) + gpio_free(bri->sda_gpio); + + gpio_free(bri->scl_gpio); +} + +/* + * We are generating clock pulses. ndelay() determines durating of clk pulses. + * We will generate clock with rate 100 KHz and so duration of both clock levels + * is: delay in ns = (10^6 / 100) / 2 + */ +#define RECOVERY_NDELAY 5000 +#define RECOVERY_CLK_CNT 9 + +static int i2c_generic_recovery(struct i2c_adapter *adap) +{ + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + int i = 0, val = 1, ret = 0; + + if (bri->prepare_recovery) + bri->prepare_recovery(adap); + + /* + * By this time SCL is high, as we need to give 9 falling-rising edges + */ + while (i++ < RECOVERY_CLK_CNT * 2) { + if (val) { + /* Break if SDA is high */ + if (bri->get_sda && bri->get_sda(adap)) + break; + /* SCL shouldn't be low here */ + if (!bri->get_scl(adap)) { + dev_err(&adap->dev, + "SCL is stuck low, exit recovery\n"); + ret = -EBUSY; + break; + } + } + + val = !val; + bri->set_scl(adap, val); + ndelay(RECOVERY_NDELAY); + } + + if (bri->unprepare_recovery) + bri->unprepare_recovery(adap); + + return ret; +} + +int i2c_generic_scl_recovery(struct i2c_adapter *adap) +{ + adap->bus_recovery_info->set_scl(adap, 1); + return i2c_generic_recovery(adap); +} +EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery); + +int i2c_generic_gpio_recovery(struct i2c_adapter *adap) +{ + int ret; + + ret = i2c_get_gpios_for_recovery(adap); + if (ret) + return ret; + + ret = i2c_generic_recovery(adap); + i2c_put_gpios_for_recovery(adap); + + return ret; +} +EXPORT_SYMBOL_GPL(i2c_generic_gpio_recovery); + +int i2c_recover_bus(struct i2c_adapter *adap) +{ + if (!adap->bus_recovery_info) + return -EOPNOTSUPP; + + dev_dbg(&adap->dev, "Trying i2c bus recovery\n"); + return adap->bus_recovery_info->recover_bus(adap); +} +EXPORT_SYMBOL_GPL(i2c_recover_bus); + +static int i2c_device_probe(struct device *dev) +{ + struct i2c_client *client = i2c_verify_client(dev); + struct i2c_driver *driver; + int status; + + if (!client) + return 0; + + if (!client->irq && dev->of_node) { + int irq = of_irq_get(dev->of_node, 0); + + if (irq == -EPROBE_DEFER) + return irq; + if (irq < 0) + irq = 0; + + client->irq = irq; + } + + driver = to_i2c_driver(dev->driver); + if (!driver->probe || !driver->id_table) + return -ENODEV; + + if (!device_can_wakeup(&client->dev)) + device_init_wakeup(&client->dev, + client->flags & I2C_CLIENT_WAKE); + dev_dbg(dev, "probe\n"); + + status = of_clk_set_defaults(dev->of_node, false); + if (status < 0) + return status; + + status = dev_pm_domain_attach(&client->dev, true); + if (status != -EPROBE_DEFER) { + status = driver->probe(client, i2c_match_id(driver->id_table, + client)); + if (status) + dev_pm_domain_detach(&client->dev, true); + } + + return status; +} + +static int i2c_device_remove(struct device *dev) +{ + struct i2c_client *client = i2c_verify_client(dev); + struct i2c_driver *driver; + int status = 0; + + if (!client || !dev->driver) + return 0; + + driver = to_i2c_driver(dev->driver); + if (driver->remove) { + dev_dbg(dev, "remove\n"); + status = driver->remove(client); + } + + dev_pm_domain_detach(&client->dev, true); + return status; +} + +static void i2c_device_shutdown(struct device *dev) +{ + struct i2c_client *client = i2c_verify_client(dev); + struct i2c_driver *driver; + + if (!client || !dev->driver) + return; + driver = to_i2c_driver(dev->driver); + if (driver->shutdown) + driver->shutdown(client); +} + +static void i2c_client_dev_release(struct device *dev) +{ + kfree(to_i2c_client(dev)); +} + +static ssize_t +show_name(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%s\n", dev->type == &i2c_client_type ? + to_i2c_client(dev)->name : to_i2c_adapter(dev)->name); +} +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static ssize_t +show_modalias(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + int len; + + len = acpi_device_modalias(dev, buf, PAGE_SIZE -1); + if (len != -ENODEV) + return len; + + return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name); +} +static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); + +static struct attribute *i2c_dev_attrs[] = { + &dev_attr_name.attr, + /* modalias helps coldplug: modprobe $(cat .../modalias) */ + &dev_attr_modalias.attr, + NULL +}; +ATTRIBUTE_GROUPS(i2c_dev); + +struct bus_type i2c_bus_type = { + .name = "i2c", + .match = i2c_device_match, + .probe = i2c_device_probe, + .remove = i2c_device_remove, + .shutdown = i2c_device_shutdown, +}; +EXPORT_SYMBOL_GPL(i2c_bus_type); + +static struct device_type i2c_client_type = { + .groups = i2c_dev_groups, + .uevent = i2c_device_uevent, + .release = i2c_client_dev_release, +}; + + +/** + * i2c_verify_client - return parameter as i2c_client, or NULL + * @dev: device, probably from some driver model iterator + * + * When traversing the driver model tree, perhaps using driver model + * iterators like @device_for_each_child(), you can't assume very much + * about the nodes you find. Use this function to avoid oopses caused + * by wrongly treating some non-I2C device as an i2c_client. + */ +struct i2c_client *i2c_verify_client(struct device *dev) +{ + return (dev->type == &i2c_client_type) + ? to_i2c_client(dev) + : NULL; +} +EXPORT_SYMBOL(i2c_verify_client); + + +/* This is a permissive address validity check, I2C address map constraints + * are purposely not enforced, except for the general call address. */ +static int i2c_check_client_addr_validity(const struct i2c_client *client) +{ + if (client->flags & I2C_CLIENT_TEN) { + /* 10-bit address, all values are valid */ + if (client->addr > 0x3ff) + return -EINVAL; + } else { + /* 7-bit address, reject the general call address */ + if (client->addr == 0x00 || client->addr > 0x7f) + return -EINVAL; + } + return 0; +} + +/* And this is a strict address validity check, used when probing. If a + * device uses a reserved address, then it shouldn't be probed. 7-bit + * addressing is assumed, 10-bit address devices are rare and should be + * explicitly enumerated. */ +static int i2c_check_addr_validity(unsigned short addr) +{ + /* + * Reserved addresses per I2C specification: + * 0x00 General call address / START byte + * 0x01 CBUS address + * 0x02 Reserved for different bus format + * 0x03 Reserved for future purposes + * 0x04-0x07 Hs-mode master code + * 0x78-0x7b 10-bit slave addressing + * 0x7c-0x7f Reserved for future purposes + */ + if (addr < 0x08 || addr > 0x77) + return -EINVAL; + return 0; +} + +static int __i2c_check_addr_busy(struct device *dev, void *addrp) +{ + struct i2c_client *client = i2c_verify_client(dev); + int addr = *(int *)addrp; + + if (client && client->addr == addr) + return -EBUSY; + return 0; +} + +/* walk up mux tree */ +static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr) +{ + struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter); + int result; + + result = device_for_each_child(&adapter->dev, &addr, + __i2c_check_addr_busy); + + if (!result && parent) + result = i2c_check_mux_parents(parent, addr); + + return result; +} + +/* recurse down mux tree */ +static int i2c_check_mux_children(struct device *dev, void *addrp) +{ + int result; + + if (dev->type == &i2c_adapter_type) + result = device_for_each_child(dev, addrp, + i2c_check_mux_children); + else + result = __i2c_check_addr_busy(dev, addrp); + + return result; +} + +static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr) +{ + struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter); + int result = 0; + + if (parent) + result = i2c_check_mux_parents(parent, addr); + + if (!result) + result = device_for_each_child(&adapter->dev, &addr, + i2c_check_mux_children); + + return result; +} + +/** + * i2c_lock_adapter - Get exclusive access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +void i2c_lock_adapter(struct i2c_adapter *adapter) +{ + struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter); + + if (parent) + i2c_lock_adapter(parent); + else + rt_mutex_lock(&adapter->bus_lock); +} +EXPORT_SYMBOL_GPL(i2c_lock_adapter); + +/** + * i2c_trylock_adapter - Try to get exclusive access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static int i2c_trylock_adapter(struct i2c_adapter *adapter) +{ + struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter); + + if (parent) + return i2c_trylock_adapter(parent); + else + return rt_mutex_trylock(&adapter->bus_lock); +} + +/** + * i2c_unlock_adapter - Release exclusive access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +void i2c_unlock_adapter(struct i2c_adapter *adapter) +{ + struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter); + + if (parent) + i2c_unlock_adapter(parent); + else + rt_mutex_unlock(&adapter->bus_lock); +} +EXPORT_SYMBOL_GPL(i2c_unlock_adapter); + +static void i2c_dev_set_name(struct i2c_adapter *adap, + struct i2c_client *client) +{ + struct acpi_device *adev = ACPI_COMPANION(&client->dev); + + if (adev) { + dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev)); + return; + } + + /* For 10-bit clients, add an arbitrary offset to avoid collisions */ + dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap), + client->addr | ((client->flags & I2C_CLIENT_TEN) + ? 0xa000 : 0)); +} + +/** + * i2c_new_device - instantiate an i2c device + * @adap: the adapter managing the device + * @info: describes one I2C device; bus_num is ignored + * Context: can sleep + * + * Create an i2c device. Binding is handled through driver model + * probe()/remove() methods. A driver may be bound to this device when we + * return from this function, or any later moment (e.g. maybe hotplugging will + * load the driver module). This call is not appropriate for use by mainboard + * initialization logic, which usually runs during an arch_initcall() long + * before any i2c_adapter could exist. + * + * This returns the new i2c client, which may be saved for later use with + * i2c_unregister_device(); or NULL to indicate an error. + */ +struct i2c_client * +i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) +{ + struct i2c_client *client; + int status; + + client = kzalloc(sizeof *client, GFP_KERNEL); + if (!client) + return NULL; + + client->adapter = adap; + + client->dev.platform_data = info->platform_data; + + if (info->archdata) + client->dev.archdata = *info->archdata; + + client->flags = info->flags; + client->addr = info->addr; + client->irq = info->irq; + + strlcpy(client->name, info->type, sizeof(client->name)); + + /* Check for address validity */ + status = i2c_check_client_addr_validity(client); + if (status) { + dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n", + client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr); + goto out_err_silent; + } + + /* Check for address business */ + status = i2c_check_addr_busy(adap, client->addr); + if (status) + goto out_err; + + client->dev.parent = &client->adapter->dev; + client->dev.bus = &i2c_bus_type; + client->dev.type = &i2c_client_type; + client->dev.of_node = info->of_node; + client->dev.fwnode = info->fwnode; + + i2c_dev_set_name(adap, client); + status = device_register(&client->dev); + if (status) + goto out_err; + + dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n", + client->name, dev_name(&client->dev)); + + return client; + +out_err: + dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x " + "(%d)\n", client->name, client->addr, status); +out_err_silent: + kfree(client); + return NULL; +} +EXPORT_SYMBOL_GPL(i2c_new_device); + + +/** + * i2c_unregister_device - reverse effect of i2c_new_device() + * @client: value returned from i2c_new_device() + * Context: can sleep + */ +void i2c_unregister_device(struct i2c_client *client) +{ + device_unregister(&client->dev); +} +EXPORT_SYMBOL_GPL(i2c_unregister_device); + + +static const struct i2c_device_id dummy_id[] = { + { "dummy", 0 }, + { }, +}; + +static int dummy_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return 0; +} + +static int dummy_remove(struct i2c_client *client) +{ + return 0; +} + +static struct i2c_driver dummy_driver = { + .driver.name = "dummy", + .probe = dummy_probe, + .remove = dummy_remove, + .id_table = dummy_id, +}; + +/** + * i2c_new_dummy - return a new i2c device bound to a dummy driver + * @adapter: the adapter managing the device + * @address: seven bit address to be used + * Context: can sleep + * + * This returns an I2C client bound to the "dummy" driver, intended for use + * with devices that consume multiple addresses. Examples of such chips + * include various EEPROMS (like 24c04 and 24c08 models). + * + * These dummy devices have two main uses. First, most I2C and SMBus calls + * except i2c_transfer() need a client handle; the dummy will be that handle. + * And second, this prevents the specified address from being bound to a + * different driver. + * + * This returns the new i2c client, which should be saved for later use with + * i2c_unregister_device(); or NULL to indicate an error. + */ +struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("dummy", address), + }; + + return i2c_new_device(adapter, &info); +} +EXPORT_SYMBOL_GPL(i2c_new_dummy); + +/* ------------------------------------------------------------------------- */ + +/* I2C bus adapters -- one roots each I2C or SMBUS segment */ + +static void i2c_adapter_dev_release(struct device *dev) +{ + struct i2c_adapter *adap = to_i2c_adapter(dev); + complete(&adap->dev_released); +} + +/* + * This function is only needed for mutex_lock_nested, so it is never + * called unless locking correctness checking is enabled. Thus we + * make it inline to avoid a compiler warning. That's what gcc ends up + * doing anyway. + */ +static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter) +{ + unsigned int depth = 0; + + while ((adapter = i2c_parent_is_i2c_adapter(adapter))) + depth++; + + return depth; +} + +/* + * Let users instantiate I2C devices through sysfs. This can be used when + * platform initialization code doesn't contain the proper data for + * whatever reason. Also useful for drivers that do device detection and + * detection fails, either because the device uses an unexpected address, + * or this is a compatible device with different ID register values. + * + * Parameter checking may look overzealous, but we really don't want + * the user to provide incorrect parameters. + */ +static ssize_t +i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_adapter *adap = to_i2c_adapter(dev); + struct i2c_board_info info; + struct i2c_client *client; + char *blank, end; + int res; + + memset(&info, 0, sizeof(struct i2c_board_info)); + + blank = strchr(buf, ' '); + if (!blank) { + dev_err(dev, "%s: Missing parameters\n", "new_device"); + return -EINVAL; + } + if (blank - buf > I2C_NAME_SIZE - 1) { + dev_err(dev, "%s: Invalid device name\n", "new_device"); + return -EINVAL; + } + memcpy(info.type, buf, blank - buf); + + /* Parse remaining parameters, reject extra parameters */ + res = sscanf(++blank, "%hi%c", &info.addr, &end); + if (res < 1) { + dev_err(dev, "%s: Can't parse I2C address\n", "new_device"); + return -EINVAL; + } + if (res > 1 && end != '\n') { + dev_err(dev, "%s: Extra parameters\n", "new_device"); + return -EINVAL; + } + + client = i2c_new_device(adap, &info); + if (!client) + return -EINVAL; + + /* Keep track of the added device */ + mutex_lock(&adap->userspace_clients_lock); + list_add_tail(&client->detected, &adap->userspace_clients); + mutex_unlock(&adap->userspace_clients_lock); + dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device", + info.type, info.addr); + + return count; +} +static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device); + +/* + * And of course let the users delete the devices they instantiated, if + * they got it wrong. This interface can only be used to delete devices + * instantiated by i2c_sysfs_new_device above. This guarantees that we + * don't delete devices to which some kernel code still has references. + * + * Parameter checking may look overzealous, but we really don't want + * the user to delete the wrong device. + */ +static ssize_t +i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_adapter *adap = to_i2c_adapter(dev); + struct i2c_client *client, *next; + unsigned short addr; + char end; + int res; + + /* Parse parameters, reject extra parameters */ + res = sscanf(buf, "%hi%c", &addr, &end); + if (res < 1) { + dev_err(dev, "%s: Can't parse I2C address\n", "delete_device"); + return -EINVAL; + } + if (res > 1 && end != '\n') { + dev_err(dev, "%s: Extra parameters\n", "delete_device"); + return -EINVAL; + } + + /* Make sure the device was added through sysfs */ + res = -ENOENT; + mutex_lock_nested(&adap->userspace_clients_lock, + i2c_adapter_depth(adap)); + list_for_each_entry_safe(client, next, &adap->userspace_clients, + detected) { + if (client->addr == addr) { + dev_info(dev, "%s: Deleting device %s at 0x%02hx\n", + "delete_device", client->name, client->addr); + + list_del(&client->detected); + i2c_unregister_device(client); + res = count; + break; + } + } + mutex_unlock(&adap->userspace_clients_lock); + + if (res < 0) + dev_err(dev, "%s: Can't find device in list\n", + "delete_device"); + return res; +} +static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL, + i2c_sysfs_delete_device); + +static struct attribute *i2c_adapter_attrs[] = { + &dev_attr_name.attr, + &dev_attr_new_device.attr, + &dev_attr_delete_device.attr, + NULL +}; +ATTRIBUTE_GROUPS(i2c_adapter); + +struct device_type i2c_adapter_type = { + .groups = i2c_adapter_groups, + .release = i2c_adapter_dev_release, +}; +EXPORT_SYMBOL_GPL(i2c_adapter_type); + +/** + * i2c_verify_adapter - return parameter as i2c_adapter or NULL + * @dev: device, probably from some driver model iterator + * + * When traversing the driver model tree, perhaps using driver model + * iterators like @device_for_each_child(), you can't assume very much + * about the nodes you find. Use this function to avoid oopses caused + * by wrongly treating some non-I2C device as an i2c_adapter. + */ +struct i2c_adapter *i2c_verify_adapter(struct device *dev) +{ + return (dev->type == &i2c_adapter_type) + ? to_i2c_adapter(dev) + : NULL; +} +EXPORT_SYMBOL(i2c_verify_adapter); + +#ifdef CONFIG_I2C_COMPAT +static struct class_compat *i2c_adapter_compat_class; +#endif + +static void i2c_scan_static_board_info(struct i2c_adapter *adapter) +{ + struct i2c_devinfo *devinfo; + + down_read(&__i2c_board_lock); + list_for_each_entry(devinfo, &__i2c_board_list, list) { + if (devinfo->busnum == adapter->nr + && !i2c_new_device(adapter, + &devinfo->board_info)) + dev_err(&adapter->dev, + "Can't create device at 0x%02x\n", + devinfo->board_info.addr); + } + up_read(&__i2c_board_lock); +} + +/* OF support code */ + +#if IS_ENABLED(CONFIG_OF) +static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, + struct device_node *node) +{ + struct i2c_client *result; + struct i2c_board_info info = {}; + struct dev_archdata dev_ad = {}; + const __be32 *addr; + int len; + + dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); + + if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) { + dev_err(&adap->dev, "of_i2c: modalias failure on %s\n", + node->full_name); + return ERR_PTR(-EINVAL); + } + + addr = of_get_property(node, "reg", &len); + if (!addr || (len < sizeof(int))) { + dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", + node->full_name); + return ERR_PTR(-EINVAL); + } + + info.addr = be32_to_cpup(addr); + if (info.addr > (1 << 10) - 1) { + dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", + info.addr, node->full_name); + return ERR_PTR(-EINVAL); + } + + info.of_node = of_node_get(node); + info.archdata = &dev_ad; + + if (of_get_property(node, "wakeup-source", NULL)) + info.flags |= I2C_CLIENT_WAKE; + + result = i2c_new_device(adap, &info); + if (result == NULL) { + dev_err(&adap->dev, "of_i2c: Failure registering %s\n", + node->full_name); + of_node_put(node); + return ERR_PTR(-EINVAL); + } + return result; +} + +static void of_i2c_register_devices(struct i2c_adapter *adap) +{ + struct device_node *node; + + /* Only register child devices if the adapter has a node pointer set */ + if (!adap->dev.of_node) + return; + + dev_dbg(&adap->dev, "of_i2c: walking child nodes\n"); + + for_each_available_child_of_node(adap->dev.of_node, node) + of_i2c_register_device(adap, node); +} + +static int of_dev_node_match(struct device *dev, void *data) +{ + return dev->of_node == data; +} + +/* must call put_device() when done with returned i2c_client device */ +struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, node, + of_dev_node_match); + if (!dev) + return NULL; + + return i2c_verify_client(dev); +} +EXPORT_SYMBOL(of_find_i2c_device_by_node); + +/* must call put_device() when done with returned i2c_adapter device */ +struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, node, + of_dev_node_match); + if (!dev) + return NULL; + + return i2c_verify_adapter(dev); +} +EXPORT_SYMBOL(of_find_i2c_adapter_by_node); +#else +static void of_i2c_register_devices(struct i2c_adapter *adap) { } +#endif /* CONFIG_OF */ + +static int i2c_do_add_adapter(struct i2c_driver *driver, + struct i2c_adapter *adap) +{ + /* Detect supported devices on that bus, and instantiate them */ + i2c_detect(adap, driver); + + /* Let legacy drivers scan this bus for matching devices */ + if (driver->attach_adapter) { + dev_warn(&adap->dev, "%s: attach_adapter method is deprecated\n", + driver->driver.name); + dev_warn(&adap->dev, "Please use another way to instantiate " + "your i2c_client\n"); + /* We ignore the return code; if it fails, too bad */ + driver->attach_adapter(adap); + } + return 0; +} + +static int __process_new_adapter(struct device_driver *d, void *data) +{ + return i2c_do_add_adapter(to_i2c_driver(d), data); +} + +static int i2c_register_adapter(struct i2c_adapter *adap) +{ + int res = 0; + + /* Can't register until after driver model init */ + if (unlikely(WARN_ON(!i2c_bus_type.p))) { + res = -EAGAIN; + goto out_list; + } + + /* Sanity checks */ + if (unlikely(adap->name[0] == '\0')) { + pr_err("i2c-core: Attempt to register an adapter with " + "no name!\n"); + return -EINVAL; + } + if (unlikely(!adap->algo)) { + pr_err("i2c-core: Attempt to register adapter '%s' with " + "no algo!\n", adap->name); + return -EINVAL; + } + + rt_mutex_init(&adap->bus_lock); + mutex_init(&adap->userspace_clients_lock); + INIT_LIST_HEAD(&adap->userspace_clients); + + /* Set default timeout to 1 second if not already set */ + if (adap->timeout == 0) + adap->timeout = HZ; + + dev_set_name(&adap->dev, "i2c-%d", adap->nr); + adap->dev.bus = &i2c_bus_type; + adap->dev.type = &i2c_adapter_type; + res = device_register(&adap->dev); + if (res) + goto out_list; + + dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name); + + pm_runtime_no_callbacks(&adap->dev); + +#ifdef CONFIG_I2C_COMPAT + res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev, + adap->dev.parent); + if (res) + dev_warn(&adap->dev, + "Failed to create compatibility class link\n"); +#endif + + /* bus recovery specific initialization */ + if (adap->bus_recovery_info) { + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + + if (!bri->recover_bus) { + dev_err(&adap->dev, "No recover_bus() found, not using recovery\n"); + adap->bus_recovery_info = NULL; + goto exit_recovery; + } + + /* Generic GPIO recovery */ + if (bri->recover_bus == i2c_generic_gpio_recovery) { + if (!gpio_is_valid(bri->scl_gpio)) { + dev_err(&adap->dev, "Invalid SCL gpio, not using recovery\n"); + adap->bus_recovery_info = NULL; + goto exit_recovery; + } + + if (gpio_is_valid(bri->sda_gpio)) + bri->get_sda = get_sda_gpio_value; + else + bri->get_sda = NULL; + + bri->get_scl = get_scl_gpio_value; + bri->set_scl = set_scl_gpio_value; + } else if (!bri->set_scl || !bri->get_scl) { + /* Generic SCL recovery */ + dev_err(&adap->dev, "No {get|set}_gpio() found, not using recovery\n"); + adap->bus_recovery_info = NULL; + } + } + +exit_recovery: + /* create pre-declared device nodes */ + of_i2c_register_devices(adap); + acpi_i2c_register_devices(adap); + acpi_i2c_install_space_handler(adap); + + if (adap->nr < __i2c_first_dynamic_bus_num) + i2c_scan_static_board_info(adap); + + /* Notify drivers */ + mutex_lock(&core_lock); + bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter); + mutex_unlock(&core_lock); + + return 0; + +out_list: + mutex_lock(&core_lock); + idr_remove(&i2c_adapter_idr, adap->nr); + mutex_unlock(&core_lock); + return res; +} + +/** + * __i2c_add_numbered_adapter - i2c_add_numbered_adapter where nr is never -1 + * @adap: the adapter to register (with adap->nr initialized) + * Context: can sleep + * + * See i2c_add_numbered_adapter() for details. + */ +static int __i2c_add_numbered_adapter(struct i2c_adapter *adap) +{ + int id; + + mutex_lock(&core_lock); + id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, + GFP_KERNEL); + mutex_unlock(&core_lock); + if (id < 0) + return id == -ENOSPC ? -EBUSY : id; + + return i2c_register_adapter(adap); +} + +/** + * i2c_add_adapter - declare i2c adapter, use dynamic bus number + * @adapter: the adapter to add + * Context: can sleep + * + * This routine is used to declare an I2C adapter when its bus number + * doesn't matter or when its bus number is specified by an dt alias. + * Examples of bases when the bus number doesn't matter: I2C adapters + * dynamically added by USB links or PCI plugin cards. + * + * When this returns zero, a new bus number was allocated and stored + * in adap->nr, and the specified adapter became available for clients. + * Otherwise, a negative errno value is returned. + */ +int i2c_add_adapter(struct i2c_adapter *adapter) +{ + struct device *dev = &adapter->dev; + int id; + + if (dev->of_node) { + id = of_alias_get_id(dev->of_node, "i2c"); + if (id >= 0) { + adapter->nr = id; + return __i2c_add_numbered_adapter(adapter); + } + } + + mutex_lock(&core_lock); + id = idr_alloc(&i2c_adapter_idr, adapter, + __i2c_first_dynamic_bus_num, 0, GFP_KERNEL); + mutex_unlock(&core_lock); + if (id < 0) + return id; + + adapter->nr = id; + + return i2c_register_adapter(adapter); +} +EXPORT_SYMBOL(i2c_add_adapter); + +/** + * i2c_add_numbered_adapter - declare i2c adapter, use static bus number + * @adap: the adapter to register (with adap->nr initialized) + * Context: can sleep + * + * This routine is used to declare an I2C adapter when its bus number + * matters. For example, use it for I2C adapters from system-on-chip CPUs, + * or otherwise built in to the system's mainboard, and where i2c_board_info + * is used to properly configure I2C devices. + * + * If the requested bus number is set to -1, then this function will behave + * identically to i2c_add_adapter, and will dynamically assign a bus number. + * + * If no devices have pre-been declared for this bus, then be sure to + * register the adapter before any dynamically allocated ones. Otherwise + * the required bus ID may not be available. + * + * When this returns zero, the specified adapter became available for + * clients using the bus number provided in adap->nr. Also, the table + * of I2C devices pre-declared using i2c_register_board_info() is scanned, + * and the appropriate driver model device nodes are created. Otherwise, a + * negative errno value is returned. + */ +int i2c_add_numbered_adapter(struct i2c_adapter *adap) +{ + if (adap->nr == -1) /* -1 means dynamically assign bus id */ + return i2c_add_adapter(adap); + + return __i2c_add_numbered_adapter(adap); +} +EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter); + +static void i2c_do_del_adapter(struct i2c_driver *driver, + struct i2c_adapter *adapter) +{ + struct i2c_client *client, *_n; + + /* Remove the devices we created ourselves as the result of hardware + * probing (using a driver's detect method) */ + list_for_each_entry_safe(client, _n, &driver->clients, detected) { + if (client->adapter == adapter) { + dev_dbg(&adapter->dev, "Removing %s at 0x%x\n", + client->name, client->addr); + list_del(&client->detected); + i2c_unregister_device(client); + } + } +} + +static int __unregister_client(struct device *dev, void *dummy) +{ + struct i2c_client *client = i2c_verify_client(dev); + if (client && strcmp(client->name, "dummy")) + i2c_unregister_device(client); + return 0; +} + +static int __unregister_dummy(struct device *dev, void *dummy) +{ + struct i2c_client *client = i2c_verify_client(dev); + if (client) + i2c_unregister_device(client); + return 0; +} + +static int __process_removed_adapter(struct device_driver *d, void *data) +{ + i2c_do_del_adapter(to_i2c_driver(d), data); + return 0; +} + +/** + * i2c_del_adapter - unregister I2C adapter + * @adap: the adapter being unregistered + * Context: can sleep + * + * This unregisters an I2C adapter which was previously registered + * by @i2c_add_adapter or @i2c_add_numbered_adapter. + */ +void i2c_del_adapter(struct i2c_adapter *adap) +{ + struct i2c_adapter *found; + struct i2c_client *client, *next; + + /* First make sure that this adapter was ever added */ + mutex_lock(&core_lock); + found = idr_find(&i2c_adapter_idr, adap->nr); + mutex_unlock(&core_lock); + if (found != adap) { + pr_debug("i2c-core: attempting to delete unregistered " + "adapter [%s]\n", adap->name); + return; + } + + acpi_i2c_remove_space_handler(adap); + /* Tell drivers about this removal */ + mutex_lock(&core_lock); + bus_for_each_drv(&i2c_bus_type, NULL, adap, + __process_removed_adapter); + mutex_unlock(&core_lock); + + /* Remove devices instantiated from sysfs */ + mutex_lock_nested(&adap->userspace_clients_lock, + i2c_adapter_depth(adap)); + list_for_each_entry_safe(client, next, &adap->userspace_clients, + detected) { + dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name, + client->addr); + list_del(&client->detected); + i2c_unregister_device(client); + } + mutex_unlock(&adap->userspace_clients_lock); + + /* Detach any active clients. This can't fail, thus we do not + * check the returned value. This is a two-pass process, because + * we can't remove the dummy devices during the first pass: they + * could have been instantiated by real devices wishing to clean + * them up properly, so we give them a chance to do that first. */ + device_for_each_child(&adap->dev, NULL, __unregister_client); + device_for_each_child(&adap->dev, NULL, __unregister_dummy); + +#ifdef CONFIG_I2C_COMPAT + class_compat_remove_link(i2c_adapter_compat_class, &adap->dev, + adap->dev.parent); +#endif + + /* device name is gone after device_unregister */ + dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); + + /* wait until all references to the device are gone + * + * FIXME: This is old code and should ideally be replaced by an + * alternative which results in decoupling the lifetime of the struct + * device from the i2c_adapter, like spi or netdev do. Any solution + * should be throughly tested with DEBUG_KOBJECT_RELEASE enabled! + */ + init_completion(&adap->dev_released); + device_unregister(&adap->dev); + wait_for_completion(&adap->dev_released); + + /* free bus id */ + mutex_lock(&core_lock); + idr_remove(&i2c_adapter_idr, adap->nr); + mutex_unlock(&core_lock); + + /* Clear the device structure in case this adapter is ever going to be + added again */ + memset(&adap->dev, 0, sizeof(adap->dev)); +} +EXPORT_SYMBOL(i2c_del_adapter); + +/* ------------------------------------------------------------------------- */ + +int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *)) +{ + int res; + + mutex_lock(&core_lock); + res = bus_for_each_dev(&i2c_bus_type, NULL, data, fn); + mutex_unlock(&core_lock); + + return res; +} +EXPORT_SYMBOL_GPL(i2c_for_each_dev); + +static int __process_new_driver(struct device *dev, void *data) +{ + if (dev->type != &i2c_adapter_type) + return 0; + return i2c_do_add_adapter(data, to_i2c_adapter(dev)); +} + +/* + * An i2c_driver is used with one or more i2c_client (device) nodes to access + * i2c slave chips, on a bus instance associated with some i2c_adapter. + */ + +int i2c_register_driver(struct module *owner, struct i2c_driver *driver) +{ + int res; + + /* Can't register until after driver model init */ + if (unlikely(WARN_ON(!i2c_bus_type.p))) + return -EAGAIN; + + /* add the driver to the list of i2c drivers in the driver core */ + driver->driver.owner = owner; + driver->driver.bus = &i2c_bus_type; + + /* When registration returns, the driver core + * will have called probe() for all matching-but-unbound devices. + */ + res = driver_register(&driver->driver); + if (res) + return res; + + pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name); + + INIT_LIST_HEAD(&driver->clients); + /* Walk the adapters that are already present */ + i2c_for_each_dev(driver, __process_new_driver); + + return 0; +} +EXPORT_SYMBOL(i2c_register_driver); + +static int __process_removed_driver(struct device *dev, void *data) +{ + if (dev->type == &i2c_adapter_type) + i2c_do_del_adapter(data, to_i2c_adapter(dev)); + return 0; +} + +/** + * i2c_del_driver - unregister I2C driver + * @driver: the driver being unregistered + * Context: can sleep + */ +void i2c_del_driver(struct i2c_driver *driver) +{ + i2c_for_each_dev(driver, __process_removed_driver); + + driver_unregister(&driver->driver); + pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name); +} +EXPORT_SYMBOL(i2c_del_driver); + +/* ------------------------------------------------------------------------- */ + +/** + * i2c_use_client - increments the reference count of the i2c client structure + * @client: the client being referenced + * + * Each live reference to a client should be refcounted. The driver model does + * that automatically as part of driver binding, so that most drivers don't + * need to do this explicitly: they hold a reference until they're unbound + * from the device. + * + * A pointer to the client with the incremented reference counter is returned. + */ +struct i2c_client *i2c_use_client(struct i2c_client *client) +{ + if (client && get_device(&client->dev)) + return client; + return NULL; +} +EXPORT_SYMBOL(i2c_use_client); + +/** + * i2c_release_client - release a use of the i2c client structure + * @client: the client being no longer referenced + * + * Must be called when a user of a client is finished with it. + */ +void i2c_release_client(struct i2c_client *client) +{ + if (client) + put_device(&client->dev); +} +EXPORT_SYMBOL(i2c_release_client); + +struct i2c_cmd_arg { + unsigned cmd; + void *arg; +}; + +static int i2c_cmd(struct device *dev, void *_arg) +{ + struct i2c_client *client = i2c_verify_client(dev); + struct i2c_cmd_arg *arg = _arg; + struct i2c_driver *driver; + + if (!client || !client->dev.driver) + return 0; + + driver = to_i2c_driver(client->dev.driver); + if (driver->command) + driver->command(client, arg->cmd, arg->arg); + return 0; +} + +void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg) +{ + struct i2c_cmd_arg cmd_arg; + + cmd_arg.cmd = cmd; + cmd_arg.arg = arg; + device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd); +} +EXPORT_SYMBOL(i2c_clients_command); + +#if IS_ENABLED(CONFIG_OF_DYNAMIC) +static int of_i2c_notify(struct notifier_block *nb, unsigned long action, + void *arg) +{ + struct of_reconfig_data *rd = arg; + struct i2c_adapter *adap; + struct i2c_client *client; + + switch (of_reconfig_get_state_change(action, rd)) { + case OF_RECONFIG_CHANGE_ADD: + adap = of_find_i2c_adapter_by_node(rd->dn->parent); + if (adap == NULL) + return NOTIFY_OK; /* not for us */ + + client = of_i2c_register_device(adap, rd->dn); + put_device(&adap->dev); + + if (IS_ERR(client)) { + pr_err("%s: failed to create for '%s'\n", + __func__, rd->dn->full_name); + return notifier_from_errno(PTR_ERR(client)); + } + break; + case OF_RECONFIG_CHANGE_REMOVE: + /* find our device by node */ + client = of_find_i2c_device_by_node(rd->dn); + if (client == NULL) + return NOTIFY_OK; /* no? not meant for us */ + + /* unregister takes one ref away */ + i2c_unregister_device(client); + + /* and put the reference of the find */ + put_device(&client->dev); + break; + } + + return NOTIFY_OK; +} +static struct notifier_block i2c_of_notifier = { + .notifier_call = of_i2c_notify, +}; +#else +extern struct notifier_block i2c_of_notifier; +#endif /* CONFIG_OF_DYNAMIC */ + +static int __init i2c_init(void) +{ + int retval; + + retval = of_alias_get_highest_id("i2c"); + + down_write(&__i2c_board_lock); + if (retval >= __i2c_first_dynamic_bus_num) + __i2c_first_dynamic_bus_num = retval + 1; + up_write(&__i2c_board_lock); + + retval = bus_register(&i2c_bus_type); + if (retval) + return retval; +#ifdef CONFIG_I2C_COMPAT + i2c_adapter_compat_class = class_compat_register("i2c-adapter"); + if (!i2c_adapter_compat_class) { + retval = -ENOMEM; + goto bus_err; + } +#endif + retval = i2c_add_driver(&dummy_driver); + if (retval) + goto class_err; + + if (IS_ENABLED(CONFIG_OF_DYNAMIC)) + WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier)); + + return 0; + +class_err: +#ifdef CONFIG_I2C_COMPAT + class_compat_unregister(i2c_adapter_compat_class); +bus_err: +#endif + bus_unregister(&i2c_bus_type); + return retval; +} + +static void __exit i2c_exit(void) +{ + if (IS_ENABLED(CONFIG_OF_DYNAMIC)) + WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier)); + i2c_del_driver(&dummy_driver); +#ifdef CONFIG_I2C_COMPAT + class_compat_unregister(i2c_adapter_compat_class); +#endif + bus_unregister(&i2c_bus_type); + tracepoint_synchronize_unregister(); +} + +/* We must initialize early, because some subsystems register i2c drivers + * in subsys_initcall() code, but are linked (and initialized) before i2c. + */ +postcore_initcall(i2c_init); +module_exit(i2c_exit); + +/* ---------------------------------------------------- + * the functional interface to the i2c busses. + * ---------------------------------------------------- + */ + +/* Check if val is exceeding the quirk IFF quirk is non 0 */ +#define i2c_quirk_exceeded(val, quirk) ((quirk) && ((val) > (quirk))) + +static int i2c_quirk_error(struct i2c_adapter *adap, struct i2c_msg *msg, char *err_msg) +{ + dev_err_ratelimited(&adap->dev, "adapter quirk: %s (addr 0x%04x, size %u, %s)\n", + err_msg, msg->addr, msg->len, + msg->flags & I2C_M_RD ? "read" : "write"); + return -EOPNOTSUPP; +} + +static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + const struct i2c_adapter_quirks *q = adap->quirks; + int max_num = q->max_num_msgs, i; + bool do_len_check = true; + + if (q->flags & I2C_AQ_COMB) { + max_num = 2; + + /* special checks for combined messages */ + if (num == 2) { + if (q->flags & I2C_AQ_COMB_WRITE_FIRST && msgs[0].flags & I2C_M_RD) + return i2c_quirk_error(adap, &msgs[0], "1st comb msg must be write"); + + if (q->flags & I2C_AQ_COMB_READ_SECOND && !(msgs[1].flags & I2C_M_RD)) + return i2c_quirk_error(adap, &msgs[1], "2nd comb msg must be read"); + + if (q->flags & I2C_AQ_COMB_SAME_ADDR && msgs[0].addr != msgs[1].addr) + return i2c_quirk_error(adap, &msgs[0], "comb msg only to same addr"); + + if (i2c_quirk_exceeded(msgs[0].len, q->max_comb_1st_msg_len)) + return i2c_quirk_error(adap, &msgs[0], "msg too long"); + + if (i2c_quirk_exceeded(msgs[1].len, q->max_comb_2nd_msg_len)) + return i2c_quirk_error(adap, &msgs[1], "msg too long"); + + do_len_check = false; + } + } + + if (i2c_quirk_exceeded(num, max_num)) + return i2c_quirk_error(adap, &msgs[0], "too many messages"); + + for (i = 0; i < num; i++) { + u16 len = msgs[i].len; + + if (msgs[i].flags & I2C_M_RD) { + if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len)) + return i2c_quirk_error(adap, &msgs[i], "msg too long"); + } else { + if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len)) + return i2c_quirk_error(adap, &msgs[i], "msg too long"); + } + } + + return 0; +} + +/** + * __i2c_transfer - unlocked flavor of i2c_transfer + * @adap: Handle to I2C bus + * @msgs: One or more messages to execute before STOP is issued to + * terminate the operation; each message begins with a START. + * @num: Number of messages to be executed. + * + * Returns negative errno, else the number of messages executed. + * + * Adapter lock must be held when calling this function. No debug logging + * takes place. adap->algo->master_xfer existence isn't checked. + */ +int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + unsigned long orig_jiffies; + int ret, try; + + if (adap->quirks && i2c_check_for_quirks(adap, msgs, num)) + return -EOPNOTSUPP; + + /* i2c_trace_msg gets enabled when tracepoint i2c_transfer gets + * enabled. This is an efficient way of keeping the for-loop from + * being executed when not needed. + */ + if (static_key_false(&i2c_trace_msg)) { + int i; + for (i = 0; i < num; i++) + if (msgs[i].flags & I2C_M_RD) + trace_i2c_read(adap, &msgs[i], i); + else + trace_i2c_write(adap, &msgs[i], i); + } + + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (ret = 0, try = 0; try <= adap->retries; try++) { + ret = adap->algo->master_xfer(adap, msgs, num); + if (ret != -EAGAIN) + break; + if (time_after(jiffies, orig_jiffies + adap->timeout)) + break; + } + + if (static_key_false(&i2c_trace_msg)) { + int i; + for (i = 0; i < ret; i++) + if (msgs[i].flags & I2C_M_RD) + trace_i2c_reply(adap, &msgs[i], i); + trace_i2c_result(adap, i, ret); + } + + return ret; +} +EXPORT_SYMBOL(__i2c_transfer); + +/** + * i2c_transfer - execute a single or combined I2C message + * @adap: Handle to I2C bus + * @msgs: One or more messages to execute before STOP is issued to + * terminate the operation; each message begins with a START. + * @num: Number of messages to be executed. + * + * Returns negative errno, else the number of messages executed. + * + * Note that there is no requirement that each message be sent to + * the same slave address, although that is the most common model. + */ +int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + int ret; + + /* REVISIT the fault reporting model here is weak: + * + * - When we get an error after receiving N bytes from a slave, + * there is no way to report "N". + * + * - When we get a NAK after transmitting N bytes to a slave, + * there is no way to report "N" ... or to let the master + * continue executing the rest of this combined message, if + * that's the appropriate response. + * + * - When for example "num" is two and we successfully complete + * the first message but get an error part way through the + * second, it's unclear whether that should be reported as + * one (discarding status on the second message) or errno + * (discarding status on the first one). + */ + + if (adap->algo->master_xfer) { +#ifdef DEBUG + for (ret = 0; ret < num; ret++) { + dev_dbg(&adap->dev, "master_xfer[%d] %c, addr=0x%02x, " + "len=%d%s\n", ret, (msgs[ret].flags & I2C_M_RD) + ? 'R' : 'W', msgs[ret].addr, msgs[ret].len, + (msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : ""); + } +#endif + + if (in_atomic() || irqs_disabled()) { + ret = i2c_trylock_adapter(adap); + if (!ret) + /* I2C activity is ongoing. */ + return -EAGAIN; + } else { + i2c_lock_adapter(adap); + } + + ret = __i2c_transfer(adap, msgs, num); + i2c_unlock_adapter(adap); + + return ret; + } else { + dev_dbg(&adap->dev, "I2C level transfers not supported\n"); + return -EOPNOTSUPP; + } +} +EXPORT_SYMBOL(i2c_transfer); + +/** + * i2c_master_send - issue a single I2C message in master transmit mode + * @client: Handle to slave device + * @buf: Data that will be written to the slave + * @count: How many bytes to write, must be less than 64k since msg.len is u16 + * + * Returns negative errno, or else the number of bytes written. + */ +int i2c_master_send(const struct i2c_client *client, const char *buf, int count) +{ + int ret; + struct i2c_adapter *adap = client->adapter; + struct i2c_msg msg; + + msg.addr = client->addr; + msg.flags = client->flags & I2C_M_TEN; + msg.len = count; + msg.buf = (char *)buf; + + ret = i2c_transfer(adap, &msg, 1); + + /* + * If everything went ok (i.e. 1 msg transmitted), return #bytes + * transmitted, else error code. + */ + return (ret == 1) ? count : ret; +} +EXPORT_SYMBOL(i2c_master_send); + +/** + * i2c_master_recv - issue a single I2C message in master receive mode + * @client: Handle to slave device + * @buf: Where to store data read from slave + * @count: How many bytes to read, must be less than 64k since msg.len is u16 + * + * Returns negative errno, or else the number of bytes read. + */ +int i2c_master_recv(const struct i2c_client *client, char *buf, int count) +{ + struct i2c_adapter *adap = client->adapter; + struct i2c_msg msg; + int ret; + + msg.addr = client->addr; + msg.flags = client->flags & I2C_M_TEN; + msg.flags |= I2C_M_RD; + msg.len = count; + msg.buf = buf; + + ret = i2c_transfer(adap, &msg, 1); + + /* + * If everything went ok (i.e. 1 msg received), return #bytes received, + * else error code. + */ + return (ret == 1) ? count : ret; +} +EXPORT_SYMBOL(i2c_master_recv); + +/* ---------------------------------------------------- + * the i2c address scanning function + * Will not work for 10-bit addresses! + * ---------------------------------------------------- + */ + +/* + * Legacy default probe function, mostly relevant for SMBus. The default + * probe method is a quick write, but it is known to corrupt the 24RF08 + * EEPROMs due to a state machine bug, and could also irreversibly + * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f, + * we use a short byte read instead. Also, some bus drivers don't implement + * quick write, so we fallback to a byte read in that case too. + * On x86, there is another special case for FSC hardware monitoring chips, + * which want regular byte reads (address 0x73.) Fortunately, these are the + * only known chips using this I2C address on PC hardware. + * Returns 1 if probe succeeded, 0 if not. + */ +static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr) +{ + int err; + union i2c_smbus_data dummy; + +#ifdef CONFIG_X86 + if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON) + && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA)) + err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE_DATA, &dummy); + else +#endif + if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50) + && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) + err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0, + I2C_SMBUS_QUICK, NULL); + else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE)) + err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE, &dummy); + else { + dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n", + addr); + err = -EOPNOTSUPP; + } + + return err >= 0; +} + +static int i2c_detect_address(struct i2c_client *temp_client, + struct i2c_driver *driver) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter = temp_client->adapter; + int addr = temp_client->addr; + int err; + + /* Make sure the address is valid */ + err = i2c_check_addr_validity(addr); + if (err) { + dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n", + addr); + return err; + } + + /* Skip if already in use */ + if (i2c_check_addr_busy(adapter, addr)) + return 0; + + /* Make sure there is something at this address */ + if (!i2c_default_probe(adapter, addr)) + return 0; + + /* Finally call the custom detection function */ + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = addr; + err = driver->detect(temp_client, &info); + if (err) { + /* -ENODEV is returned if the detection fails. We catch it + here as this isn't an error. */ + return err == -ENODEV ? 0 : err; + } + + /* Consistency check */ + if (info.type[0] == '\0') { + dev_err(&adapter->dev, "%s detection function provided " + "no name for 0x%x\n", driver->driver.name, + addr); + } else { + struct i2c_client *client; + + /* Detection succeeded, instantiate the device */ + if (adapter->class & I2C_CLASS_DEPRECATED) + dev_warn(&adapter->dev, + "This adapter will soon drop class based instantiation of devices. " + "Please make sure client 0x%02x gets instantiated by other means. " + "Check 'Documentation/i2c/instantiating-devices' for details.\n", + info.addr); + + dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n", + info.type, info.addr); + client = i2c_new_device(adapter, &info); + if (client) + list_add_tail(&client->detected, &driver->clients); + else + dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n", + info.type, info.addr); + } + return 0; +} + +static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver) +{ + const unsigned short *address_list; + struct i2c_client *temp_client; + int i, err = 0; + int adap_id = i2c_adapter_id(adapter); + + address_list = driver->address_list; + if (!driver->detect || !address_list) + return 0; + + /* Warn that the adapter lost class based instantiation */ + if (adapter->class == I2C_CLASS_DEPRECATED) { + dev_dbg(&adapter->dev, + "This adapter dropped support for I2C classes and " + "won't auto-detect %s devices anymore. If you need it, check " + "'Documentation/i2c/instantiating-devices' for alternatives.\n", + driver->driver.name); + return 0; + } + + /* Stop here if the classes do not match */ + if (!(adapter->class & driver->class)) + return 0; + + /* Set up a temporary client to help detect callback */ + temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!temp_client) + return -ENOMEM; + temp_client->adapter = adapter; + + for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) { + dev_dbg(&adapter->dev, "found normal entry for adapter %d, " + "addr 0x%02x\n", adap_id, address_list[i]); + temp_client->addr = address_list[i]; + err = i2c_detect_address(temp_client, driver); + if (unlikely(err)) + break; + } + + kfree(temp_client); + return err; +} + +int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr) +{ + return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0, + I2C_SMBUS_QUICK, NULL) >= 0; +} +EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read); + +struct i2c_client * +i2c_new_probed_device(struct i2c_adapter *adap, + struct i2c_board_info *info, + unsigned short const *addr_list, + int (*probe)(struct i2c_adapter *, unsigned short addr)) +{ + int i; + + if (!probe) + probe = i2c_default_probe; + + for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) { + /* Check address validity */ + if (i2c_check_addr_validity(addr_list[i]) < 0) { + dev_warn(&adap->dev, "Invalid 7-bit address " + "0x%02x\n", addr_list[i]); + continue; + } + + /* Check address availability */ + if (i2c_check_addr_busy(adap, addr_list[i])) { + dev_dbg(&adap->dev, "Address 0x%02x already in " + "use, not probing\n", addr_list[i]); + continue; + } + + /* Test address responsiveness */ + if (probe(adap, addr_list[i])) + break; + } + + if (addr_list[i] == I2C_CLIENT_END) { + dev_dbg(&adap->dev, "Probing failed, no device found\n"); + return NULL; + } + + info->addr = addr_list[i]; + return i2c_new_device(adap, info); +} +EXPORT_SYMBOL_GPL(i2c_new_probed_device); + +struct i2c_adapter *i2c_get_adapter(int nr) +{ + struct i2c_adapter *adapter; + + mutex_lock(&core_lock); + adapter = idr_find(&i2c_adapter_idr, nr); + if (adapter && !try_module_get(adapter->owner)) + adapter = NULL; + + mutex_unlock(&core_lock); + return adapter; +} +EXPORT_SYMBOL(i2c_get_adapter); + +void i2c_put_adapter(struct i2c_adapter *adap) +{ + if (adap) + module_put(adap->owner); +} +EXPORT_SYMBOL(i2c_put_adapter); + +/* The SMBus parts */ + +#define POLY (0x1070U << 3) +static u8 crc8(u16 data) +{ + int i; + + for (i = 0; i < 8; i++) { + if (data & 0x8000) + data = data ^ POLY; + data = data << 1; + } + return (u8)(data >> 8); +} + +/* Incremental CRC8 over count bytes in the array pointed to by p */ +static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) +{ + int i; + + for (i = 0; i < count; i++) + crc = crc8((crc ^ p[i]) << 8); + return crc; +} + +/* Assume a 7-bit address, which is reasonable for SMBus */ +static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) +{ + /* The address will be sent first */ + u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD); + pec = i2c_smbus_pec(pec, &addr, 1); + + /* The data buffer follows */ + return i2c_smbus_pec(pec, msg->buf, msg->len); +} + +/* Used for write only transactions */ +static inline void i2c_smbus_add_pec(struct i2c_msg *msg) +{ + msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); + msg->len++; +} + +/* Return <0 on CRC error + If there was a write before this read (most cases) we need to take the + partial CRC from the write part into account. + Note that this function does modify the message (we need to decrease the + message length to hide the CRC byte from the caller). */ +static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) +{ + u8 rpec = msg->buf[--msg->len]; + cpec = i2c_smbus_msg_pec(cpec, msg); + + if (rpec != cpec) { + pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n", + rpec, cpec); + return -EBADMSG; + } + return 0; +} + +/** + * i2c_smbus_read_byte - SMBus "receive byte" protocol + * @client: Handle to slave device + * + * This executes the SMBus "receive byte" protocol, returning negative errno + * else the byte received from the device. + */ +s32 i2c_smbus_read_byte(const struct i2c_client *client) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE, &data); + return (status < 0) ? status : data.byte; +} +EXPORT_SYMBOL(i2c_smbus_read_byte); + +/** + * i2c_smbus_write_byte - SMBus "send byte" protocol + * @client: Handle to slave device + * @value: Byte to be sent + * + * This executes the SMBus "send byte" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value) +{ + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); +} +EXPORT_SYMBOL(i2c_smbus_write_byte); + +/** + * i2c_smbus_read_byte_data - SMBus "read byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read byte" protocol, returning negative errno + * else a data byte received from the device. + */ +s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data); + return (status < 0) ? status : data.byte; +} +EXPORT_SYMBOL(i2c_smbus_read_byte_data); + +/** + * i2c_smbus_write_byte_data - SMBus "write byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: Byte being written + * + * This executes the SMBus "write byte" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command, + u8 value) +{ + union i2c_smbus_data data; + data.byte = value; + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BYTE_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_byte_data); + +/** + * i2c_smbus_read_word_data - SMBus "read word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read word" protocol, returning negative errno + * else a 16-bit unsigned "word" received from the device. + */ +s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_WORD_DATA, &data); + return (status < 0) ? status : data.word; +} +EXPORT_SYMBOL(i2c_smbus_read_word_data); + +/** + * i2c_smbus_write_word_data - SMBus "write word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: 16-bit "word" being written + * + * This executes the SMBus "write word" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command, + u16 value) +{ + union i2c_smbus_data data; + data.word = value; + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_WORD_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_word_data); + +/** + * i2c_smbus_read_block_data - SMBus "block read" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @values: Byte array into which data will be read; big enough to hold + * the data returned by the slave. SMBus allows at most 32 bytes. + * + * This executes the SMBus "block read" protocol, returning negative errno + * else the number of data bytes in the slave's response. + * + * Note that using this function requires that the client's adapter support + * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers + * support this; its emulation through I2C messaging relies on a specific + * mechanism (I2C_M_RECV_LEN) which may not be implemented. + */ +s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command, + u8 *values) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BLOCK_DATA, &data); + if (status) + return status; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_block_data); + +/** + * i2c_smbus_write_block_data - SMBus "block write" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most 32 bytes + * @values: Byte array which will be written. + * + * This executes the SMBus "block write" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command, + u8 length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(&data.block[1], values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BLOCK_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_block_data); + +/* Returns the number of read bytes */ +s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command, + u8 length, u8 *values) +{ + union i2c_smbus_data data; + int status; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); + if (status < 0) + return status; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data); + +s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, + u8 length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(data.block + 1, values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); + +/* Simulate a SMBus command using the i2c protocol + No checking of parameters is done! */ +static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, + char read_write, u8 command, int size, + union i2c_smbus_data *data) +{ + /* So we need to generate a series of msgs. In the case of writing, we + need to use only one message; when reading, we need two. We initialize + most things with sane defaults, to keep the code below somewhat + simpler. */ + unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; + unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; + int num = read_write == I2C_SMBUS_READ ? 2 : 1; + int i; + u8 partial_pec = 0; + int status; + struct i2c_msg msg[2] = { + { + .addr = addr, + .flags = flags, + .len = 1, + .buf = msgbuf0, + }, { + .addr = addr, + .flags = flags | I2C_M_RD, + .len = 0, + .buf = msgbuf1, + }, + }; + + msgbuf0[0] = command; + switch (size) { + case I2C_SMBUS_QUICK: + msg[0].len = 0; + /* Special case: The read/write field is used as data */ + msg[0].flags = flags | (read_write == I2C_SMBUS_READ ? + I2C_M_RD : 0); + num = 1; + break; + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_READ) { + /* Special case: only a read! */ + msg[0].flags = I2C_M_RD | flags; + num = 1; + } + break; + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_READ) + msg[1].len = 1; + else { + msg[0].len = 2; + msgbuf0[1] = data->byte; + } + break; + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_READ) + msg[1].len = 2; + else { + msg[0].len = 3; + msgbuf0[1] = data->word & 0xff; + msgbuf0[2] = data->word >> 8; + } + break; + case I2C_SMBUS_PROC_CALL: + num = 2; /* Special case */ + read_write = I2C_SMBUS_READ; + msg[0].len = 3; + msg[1].len = 2; + msgbuf0[1] = data->word & 0xff; + msgbuf0[2] = data->word >> 8; + break; + case I2C_SMBUS_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + } else { + msg[0].len = data->block[0] + 2; + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + } + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + num = 2; /* Another special case */ + read_write = I2C_SMBUS_READ; + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + msg[0].len = data->block[0] + 2; + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + msg[1].len = data->block[0]; + } else { + msg[0].len = data->block[0] + 1; + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + for (i = 1; i <= data->block[0]; i++) + msgbuf0[i] = data->block[i]; + } + break; + default: + dev_err(&adapter->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + + i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA); + if (i) { + /* Compute PEC if first message is a write */ + if (!(msg[0].flags & I2C_M_RD)) { + if (num == 1) /* Write only */ + i2c_smbus_add_pec(&msg[0]); + else /* Write followed by read */ + partial_pec = i2c_smbus_msg_pec(0, &msg[0]); + } + /* Ask for PEC if last message is a read */ + if (msg[num-1].flags & I2C_M_RD) + msg[num-1].len++; + } + + status = i2c_transfer(adapter, msg, num); + if (status < 0) + return status; + + /* Check PEC if last message is a read */ + if (i && (msg[num-1].flags & I2C_M_RD)) { + status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); + if (status < 0) + return status; + } + + if (read_write == I2C_SMBUS_READ) + switch (size) { + case I2C_SMBUS_BYTE: + data->byte = msgbuf0[0]; + break; + case I2C_SMBUS_BYTE_DATA: + data->byte = msgbuf1[0]; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + data->word = msgbuf1[0] | (msgbuf1[1] << 8); + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + for (i = 0; i < data->block[0]; i++) + data->block[i+1] = msgbuf1[i]; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + for (i = 0; i < msgbuf1[0] + 1; i++) + data->block[i] = msgbuf1[i]; + break; + } + return 0; +} + +/** + * i2c_smbus_xfer - execute SMBus protocol operations + * @adapter: Handle to I2C bus + * @addr: Address of SMBus slave on that bus + * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC) + * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE + * @command: Byte interpreted by slave, for protocols which use such bytes + * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL + * @data: Data to be read or written + * + * This executes an SMBus protocol operation, and returns a negative + * errno code else zero on success. + */ +s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + union i2c_smbus_data *data) +{ + unsigned long orig_jiffies; + int try; + s32 res; + + /* If enabled, the following two tracepoints are conditional on + * read_write and protocol. + */ + trace_smbus_write(adapter, addr, flags, read_write, + command, protocol, data); + trace_smbus_read(adapter, addr, flags, read_write, + command, protocol); + + flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB; + + if (adapter->algo->smbus_xfer) { + i2c_lock_adapter(adapter); + + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= adapter->retries; try++) { + res = adapter->algo->smbus_xfer(adapter, addr, flags, + read_write, command, + protocol, data); + if (res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + adapter->timeout)) + break; + } + i2c_unlock_adapter(adapter); + + if (res != -EOPNOTSUPP || !adapter->algo->master_xfer) + goto trace; + /* + * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't + * implement native support for the SMBus operation. + */ + } + + res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write, + command, protocol, data); + +trace: + /* If enabled, the reply tracepoint is conditional on read_write. */ + trace_smbus_reply(adapter, addr, flags, read_write, + command, protocol, data); + trace_smbus_result(adapter, addr, flags, read_write, + command, protocol, res); + + return res; +} +EXPORT_SYMBOL(i2c_smbus_xfer); + +#if IS_ENABLED(CONFIG_I2C_SLAVE) +int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) +{ + int ret; + + if (!client || !slave_cb) + return -EINVAL; + + if (!(client->flags & I2C_CLIENT_TEN)) { + /* Enforce stricter address checking */ + ret = i2c_check_addr_validity(client->addr); + if (ret) + return ret; + } + + if (!client->adapter->algo->reg_slave) + return -EOPNOTSUPP; + + client->slave_cb = slave_cb; + + i2c_lock_adapter(client->adapter); + ret = client->adapter->algo->reg_slave(client); + i2c_unlock_adapter(client->adapter); + + if (ret) + client->slave_cb = NULL; + + return ret; +} +EXPORT_SYMBOL_GPL(i2c_slave_register); + +int i2c_slave_unregister(struct i2c_client *client) +{ + int ret; + + if (!client->adapter->algo->unreg_slave) + return -EOPNOTSUPP; + + i2c_lock_adapter(client->adapter); + ret = client->adapter->algo->unreg_slave(client); + i2c_unlock_adapter(client->adapter); + + if (ret == 0) + client->slave_cb = NULL; + + return ret; +} +EXPORT_SYMBOL_GPL(i2c_slave_unregister); +#endif + +MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>"); +MODULE_DESCRIPTION("I2C-Bus main module"); +MODULE_LICENSE("GPL"); |