1 files changed, 473 insertions, 0 deletions

diff --git a/kernel/drivers/i2c/busses/i2c-viperboard.c b/kernel/drivers/i2c/busses/i2c-viperboard.c
new file mode 100644
index 000000000..47e88adf2
--- /dev/null
+++ b/kernel/drivers/i2c/busses/i2c-viperboard.c
@@ -0,0 +1,473 @@
+/*
+ *  Nano River Technologies viperboard i2c master driver
+ *
+ *  (C) 2012 by Lemonage GmbH
+ *  Author: Lars Poeschel <poeschel@lemonage.de>
+ *  All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/viperboard.h>
+
+struct vprbrd_i2c {
+	struct i2c_adapter i2c;
+	u8 bus_freq_param;
+};
+
+/* i2c bus frequency module parameter */
+static u8 i2c_bus_param;
+static unsigned int i2c_bus_freq = 100;
+module_param(i2c_bus_freq, int, 0);
+MODULE_PARM_DESC(i2c_bus_freq,
+	"i2c bus frequency in khz (default is 100) valid values: 10, 100, 200, 400, 1000, 3000, 6000");
+
+static int vprbrd_i2c_status(struct i2c_adapter *i2c,
+	struct vprbrd_i2c_status *status, bool prev_error)
+{
+	u16 bytes_xfer;
+	int ret;
+	struct vprbrd *vb = (struct vprbrd *)i2c->algo_data;
+
+	/* check for protocol error */
+	bytes_xfer = sizeof(struct vprbrd_i2c_status);
+
+	ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_I2C, VPRBRD_USB_TYPE_IN, 0x0000, 0x0000,
+		status, bytes_xfer, VPRBRD_USB_TIMEOUT_MS);
+
+	if (ret != bytes_xfer)
+		prev_error = true;
+
+	if (prev_error) {
+		dev_err(&i2c->dev, "failure in usb communication\n");
+		return -EREMOTEIO;
+	}
+
+	dev_dbg(&i2c->dev, "  status = %d\n", status->status);
+	if (status->status != 0x00) {
+		dev_err(&i2c->dev, "failure: i2c protocol error\n");
+		return -EPROTO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_receive(struct usb_device *usb_dev,
+	struct vprbrd_i2c_read_msg *rmsg, int bytes_xfer)
+{
+	int ret, bytes_actual;
+	int error = 0;
+
+	/* send the read request */
+	ret = usb_bulk_msg(usb_dev,
+		usb_sndbulkpipe(usb_dev, VPRBRD_EP_OUT), rmsg,
+		sizeof(struct vprbrd_i2c_read_hdr), &bytes_actual,
+		VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0)
+		|| (bytes_actual != sizeof(struct vprbrd_i2c_read_hdr))) {
+		dev_err(&usb_dev->dev, "failure transmitting usb\n");
+		error = -EREMOTEIO;
+	}
+
+	/* read the actual data */
+	ret = usb_bulk_msg(usb_dev,
+		usb_rcvbulkpipe(usb_dev, VPRBRD_EP_IN), rmsg,
+		bytes_xfer, &bytes_actual, VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0) || (bytes_xfer != bytes_actual)) {
+		dev_err(&usb_dev->dev, "failure receiving usb\n");
+		error = -EREMOTEIO;
+	}
+	return error;
+}
+
+static int vprbrd_i2c_addr(struct usb_device *usb_dev,
+	struct vprbrd_i2c_addr_msg *amsg)
+{
+	int ret, bytes_actual;
+
+	ret = usb_bulk_msg(usb_dev,
+		usb_sndbulkpipe(usb_dev, VPRBRD_EP_OUT), amsg,
+		sizeof(struct vprbrd_i2c_addr_msg), &bytes_actual,
+		VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0) ||
+			(sizeof(struct vprbrd_i2c_addr_msg) != bytes_actual)) {
+		dev_err(&usb_dev->dev, "failure transmitting usb\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg)
+{
+	int ret;
+	u16 remain_len, len1, len2, start = 0x0000;
+	struct vprbrd_i2c_read_msg *rmsg =
+		(struct vprbrd_i2c_read_msg *)vb->buf;
+
+	remain_len = msg->len;
+	rmsg->header.cmd = VPRBRD_I2C_CMD_READ;
+	while (remain_len > 0) {
+		rmsg->header.addr = cpu_to_le16(start + 0x4000);
+		if (remain_len <= 255) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len;
+			rmsg->header.len1 = 0x00;
+			rmsg->header.len2 = 0x00;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 510) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len - 255;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0x00;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 512) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len - 510;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 767) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 512;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 1022) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 767;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 1024) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 1022;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0xff;
+			remain_len = 0;
+		} else {
+			len1 = 512;
+			len2 = 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = 0x02;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0xff;
+			remain_len -= 1024;
+			start += 1024;
+		}
+		rmsg->header.tf1 = cpu_to_le16(len1);
+		rmsg->header.tf2 = cpu_to_le16(len2);
+
+		/* first read transfer */
+		ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len1);
+		if (ret < 0)
+			return ret;
+		/* copy the received data */
+		memcpy(msg->buf + start, rmsg, len1);
+
+		/* second read transfer if neccessary */
+		if (len2 > 0) {
+			ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len2);
+			if (ret < 0)
+				return ret;
+			/* copy the received data */
+			memcpy(msg->buf + start + 512, rmsg, len2);
+		}
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_write(struct vprbrd *vb, struct i2c_msg *msg)
+{
+	int ret, bytes_actual;
+	u16 remain_len, bytes_xfer,
+		start = 0x0000;
+	struct vprbrd_i2c_write_msg *wmsg =
+		(struct vprbrd_i2c_write_msg *)vb->buf;
+
+	remain_len = msg->len;
+	wmsg->header.cmd = VPRBRD_I2C_CMD_WRITE;
+	wmsg->header.last = 0x00;
+	wmsg->header.chan = 0x00;
+	wmsg->header.spi = 0x0000;
+	while (remain_len > 0) {
+		wmsg->header.addr = cpu_to_le16(start + 0x4000);
+		if (remain_len > 503) {
+			wmsg->header.len1 = 0xff;
+			wmsg->header.len2 = 0xf8;
+			remain_len -= 503;
+			bytes_xfer = 503 + sizeof(struct vprbrd_i2c_write_hdr);
+			start += 503;
+		} else if (remain_len > 255) {
+			wmsg->header.len1 = 0xff;
+			wmsg->header.len2 = (remain_len - 255);
+			bytes_xfer = remain_len +
+				sizeof(struct vprbrd_i2c_write_hdr);
+			remain_len = 0;
+		} else {
+			wmsg->header.len1 = remain_len;
+			wmsg->header.len2 = 0x00;
+			bytes_xfer = remain_len +
+				sizeof(struct vprbrd_i2c_write_hdr);
+			remain_len = 0;
+		}
+		memcpy(wmsg->data, msg->buf + start,
+			bytes_xfer - sizeof(struct vprbrd_i2c_write_hdr));
+
+		ret = usb_bulk_msg(vb->usb_dev,
+			usb_sndbulkpipe(vb->usb_dev,
+			VPRBRD_EP_OUT), wmsg,
+			bytes_xfer, &bytes_actual, VPRBRD_USB_TIMEOUT_MS);
+		if ((ret < 0) || (bytes_xfer != bytes_actual))
+			return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_xfer(struct i2c_adapter *i2c, struct i2c_msg *msgs,
+		int num)
+{
+	struct i2c_msg *pmsg;
+	int i, ret,
+		error = 0;
+	struct vprbrd *vb = (struct vprbrd *)i2c->algo_data;
+	struct vprbrd_i2c_addr_msg *amsg =
+		(struct vprbrd_i2c_addr_msg *)vb->buf;
+	struct vprbrd_i2c_status *smsg = (struct vprbrd_i2c_status *)vb->buf;
+
+	dev_dbg(&i2c->dev, "master xfer %d messages:\n", num);
+
+	for (i = 0 ; i < num ; i++) {
+		pmsg = &msgs[i];
+
+		dev_dbg(&i2c->dev,
+			"  %d: %s (flags %d) %d bytes to 0x%02x\n",
+			i, pmsg->flags & I2C_M_RD ? "read" : "write",
+			pmsg->flags, pmsg->len, pmsg->addr);
+
+		mutex_lock(&vb->lock);
+		/* directly send the message */
+		if (pmsg->flags & I2C_M_RD) {
+			/* read data */
+			amsg->cmd = VPRBRD_I2C_CMD_ADDR;
+			amsg->unknown2 = 0x00;
+			amsg->unknown3 = 0x00;
+			amsg->addr = pmsg->addr;
+			amsg->unknown1 = 0x01;
+			amsg->len = cpu_to_le16(pmsg->len);
+			/* send the addr and len, we're interested to board */
+			ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_read(vb, pmsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_status(i2c, smsg, error);
+			if (ret < 0)
+				error = ret;
+			/* in case of protocol error, return the error */
+			if (error < 0)
+				goto error;
+		} else {
+			/* write data */
+			ret = vprbrd_i2c_write(vb, pmsg);
+
+			amsg->cmd = VPRBRD_I2C_CMD_ADDR;
+			amsg->unknown2 = 0x00;
+			amsg->unknown3 = 0x00;
+			amsg->addr = pmsg->addr;
+			amsg->unknown1 = 0x00;
+			amsg->len = cpu_to_le16(pmsg->len);
+			/* send the addr, the data goes to to board */
+			ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_status(i2c, smsg, error);
+			if (ret < 0)
+				error = ret;
+
+			if (error < 0)
+				goto error;
+		}
+		mutex_unlock(&vb->lock);
+	}
+	return 0;
+error:
+	mutex_unlock(&vb->lock);
+	return error;
+}
+
+static u32 vprbrd_i2c_func(struct i2c_adapter *i2c)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+/* This is the actual algorithm we define */
+static const struct i2c_algorithm vprbrd_algorithm = {
+	.master_xfer	= vprbrd_i2c_xfer,
+	.functionality	= vprbrd_i2c_func,
+};
+
+static struct i2c_adapter_quirks vprbrd_quirks = {
+	.max_read_len = 2048,
+	.max_write_len = 2048,
+};
+
+static int vprbrd_i2c_probe(struct platform_device *pdev)
+{
+	struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent);
+	struct vprbrd_i2c *vb_i2c;
+	int ret;
+	int pipe;
+
+	vb_i2c = devm_kzalloc(&pdev->dev, sizeof(*vb_i2c), GFP_KERNEL);
+	if (vb_i2c == NULL)
+		return -ENOMEM;
+
+	/* setup i2c adapter description */
+	vb_i2c->i2c.owner = THIS_MODULE;
+	vb_i2c->i2c.class = I2C_CLASS_HWMON;
+	vb_i2c->i2c.algo = &vprbrd_algorithm;
+	vb_i2c->i2c.quirks = &vprbrd_quirks;
+	vb_i2c->i2c.algo_data = vb;
+	/* save the param in usb capabable memory */
+	vb_i2c->bus_freq_param = i2c_bus_param;
+
+	snprintf(vb_i2c->i2c.name, sizeof(vb_i2c->i2c.name),
+		 "viperboard at bus %03d device %03d",
+		 vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
+
+	/* setting the bus frequency */
+	if ((i2c_bus_param <= VPRBRD_I2C_FREQ_10KHZ)
+		&& (i2c_bus_param >= VPRBRD_I2C_FREQ_6MHZ)) {
+		pipe = usb_sndctrlpipe(vb->usb_dev, 0);
+		ret = usb_control_msg(vb->usb_dev, pipe,
+			VPRBRD_USB_REQUEST_I2C_FREQ, VPRBRD_USB_TYPE_OUT,
+			0x0000, 0x0000, &vb_i2c->bus_freq_param, 1,
+			VPRBRD_USB_TIMEOUT_MS);
+	    if (ret != 1) {
+		dev_err(&pdev->dev,
+			"failure setting i2c_bus_freq to %d\n", i2c_bus_freq);
+		return -EIO;
+	    }
+	} else {
+		dev_err(&pdev->dev,
+			"invalid i2c_bus_freq setting:%d\n", i2c_bus_freq);
+		return -EIO;
+	}
+
+	vb_i2c->i2c.dev.parent = &pdev->dev;
+
+	/* attach to i2c layer */
+	i2c_add_adapter(&vb_i2c->i2c);
+
+	platform_set_drvdata(pdev, vb_i2c);
+
+	return 0;
+}
+
+static int vprbrd_i2c_remove(struct platform_device *pdev)
+{
+	struct vprbrd_i2c *vb_i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&vb_i2c->i2c);
+
+	return 0;
+}
+
+static struct platform_driver vprbrd_i2c_driver = {
+	.driver.name	= "viperboard-i2c",
+	.driver.owner	= THIS_MODULE,
+	.probe		= vprbrd_i2c_probe,
+	.remove		= vprbrd_i2c_remove,
+};
+
+static int __init vprbrd_i2c_init(void)
+{
+	switch (i2c_bus_freq) {
+	case 6000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_6MHZ;
+		break;
+	case 3000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_3MHZ;
+		break;
+	case 1000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_1MHZ;
+		break;
+	case 400:
+		i2c_bus_param = VPRBRD_I2C_FREQ_400KHZ;
+		break;
+	case 200:
+		i2c_bus_param = VPRBRD_I2C_FREQ_200KHZ;
+		break;
+	case 100:
+		i2c_bus_param = VPRBRD_I2C_FREQ_100KHZ;
+		break;
+	case 10:
+		i2c_bus_param = VPRBRD_I2C_FREQ_10KHZ;
+		break;
+	default:
+		pr_warn("invalid i2c_bus_freq (%d)\n", i2c_bus_freq);
+		i2c_bus_param = VPRBRD_I2C_FREQ_100KHZ;
+	}
+
+	return platform_driver_register(&vprbrd_i2c_driver);
+}
+subsys_initcall(vprbrd_i2c_init);
+
+static void __exit vprbrd_i2c_exit(void)
+{
+	platform_driver_unregister(&vprbrd_i2c_driver);
+}
+module_exit(vprbrd_i2c_exit);
+
+MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
+MODULE_DESCRIPTION("I2C master driver for Nano River Techs Viperboard");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:viperboard-i2c");