diff options
Diffstat (limited to 'kernel/drivers/i2c/busses/i2c-piix4.c')
| -rw-r--r-- | kernel/drivers/i2c/busses/i2c-piix4.c | 700 |
1 files changed, 700 insertions, 0 deletions
diff --git a/kernel/drivers/i2c/busses/i2c-piix4.c b/kernel/drivers/i2c/busses/i2c-piix4.c new file mode 100644 index 000000000..67cbec679 --- /dev/null +++ b/kernel/drivers/i2c/busses/i2c-piix4.c @@ -0,0 +1,700 @@ +/* + Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and + Philip Edelbrock <phil@netroedge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. +*/ + +/* + Supports: + Intel PIIX4, 440MX + Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 + ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 + AMD Hudson-2, ML, CZ + SMSC Victory66 + + Note: we assume there can only be one device, with one or more + SMBus interfaces. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/stddef.h> +#include <linux/ioport.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/dmi.h> +#include <linux/acpi.h> +#include <linux/io.h> + + +/* PIIX4 SMBus address offsets */ +#define SMBHSTSTS (0 + piix4_smba) +#define SMBHSLVSTS (1 + piix4_smba) +#define SMBHSTCNT (2 + piix4_smba) +#define SMBHSTCMD (3 + piix4_smba) +#define SMBHSTADD (4 + piix4_smba) +#define SMBHSTDAT0 (5 + piix4_smba) +#define SMBHSTDAT1 (6 + piix4_smba) +#define SMBBLKDAT (7 + piix4_smba) +#define SMBSLVCNT (8 + piix4_smba) +#define SMBSHDWCMD (9 + piix4_smba) +#define SMBSLVEVT (0xA + piix4_smba) +#define SMBSLVDAT (0xC + piix4_smba) + +/* count for request_region */ +#define SMBIOSIZE 8 + +/* PCI Address Constants */ +#define SMBBA 0x090 +#define SMBHSTCFG 0x0D2 +#define SMBSLVC 0x0D3 +#define SMBSHDW1 0x0D4 +#define SMBSHDW2 0x0D5 +#define SMBREV 0x0D6 + +/* Other settings */ +#define MAX_TIMEOUT 500 +#define ENABLE_INT9 0 + +/* PIIX4 constants */ +#define PIIX4_QUICK 0x00 +#define PIIX4_BYTE 0x04 +#define PIIX4_BYTE_DATA 0x08 +#define PIIX4_WORD_DATA 0x0C +#define PIIX4_BLOCK_DATA 0x14 + +/* insmod parameters */ + +/* If force is set to anything different from 0, we forcibly enable the + PIIX4. DANGEROUS! */ +static int force; +module_param (force, int, 0); +MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); + +/* If force_addr is set to anything different from 0, we forcibly enable + the PIIX4 at the given address. VERY DANGEROUS! */ +static int force_addr; +module_param (force_addr, int, 0); +MODULE_PARM_DESC(force_addr, + "Forcibly enable the PIIX4 at the given address. " + "EXTREMELY DANGEROUS!"); + +static int srvrworks_csb5_delay; +static struct pci_driver piix4_driver; + +static const struct dmi_system_id piix4_dmi_blacklist[] = { + { + .ident = "Sapphire AM2RD790", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."), + DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"), + }, + }, + { + .ident = "DFI Lanparty UT 790FX", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."), + DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"), + }, + }, + { } +}; + +/* The IBM entry is in a separate table because we only check it + on Intel-based systems */ +static const struct dmi_system_id piix4_dmi_ibm[] = { + { + .ident = "IBM", + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, + }, + { }, +}; + +struct i2c_piix4_adapdata { + unsigned short smba; +}; + +static int piix4_setup(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id) +{ + unsigned char temp; + unsigned short piix4_smba; + + if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) && + (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5)) + srvrworks_csb5_delay = 1; + + /* On some motherboards, it was reported that accessing the SMBus + caused severe hardware problems */ + if (dmi_check_system(piix4_dmi_blacklist)) { + dev_err(&PIIX4_dev->dev, + "Accessing the SMBus on this system is unsafe!\n"); + return -EPERM; + } + + /* Don't access SMBus on IBM systems which get corrupted eeproms */ + if (dmi_check_system(piix4_dmi_ibm) && + PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) { + dev_err(&PIIX4_dev->dev, "IBM system detected; this module " + "may corrupt your serial eeprom! Refusing to load " + "module!\n"); + return -EPERM; + } + + /* Determine the address of the SMBus areas */ + if (force_addr) { + piix4_smba = force_addr & 0xfff0; + force = 0; + } else { + pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); + piix4_smba &= 0xfff0; + if(piix4_smba == 0) { + dev_err(&PIIX4_dev->dev, "SMBus base address " + "uninitialized - upgrade BIOS or use " + "force_addr=0xaddr\n"); + return -ENODEV; + } + } + + if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) + return -ENODEV; + + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { + dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", + piix4_smba); + return -EBUSY; + } + + pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); + + /* If force_addr is set, we program the new address here. Just to make + sure, we disable the PIIX4 first. */ + if (force_addr) { + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe); + pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba); + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01); + dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to " + "new address %04x!\n", piix4_smba); + } else if ((temp & 1) == 0) { + if (force) { + /* This should never need to be done, but has been + * noted that many Dell machines have the SMBus + * interface on the PIIX4 disabled!? NOTE: This assumes + * I/O space and other allocations WERE done by the + * Bios! Don't complain if your hardware does weird + * things after enabling this. :') Check for Bios + * updates before resorting to this. + */ + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, + temp | 1); + dev_notice(&PIIX4_dev->dev, + "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n"); + } else { + dev_err(&PIIX4_dev->dev, + "SMBus Host Controller not enabled!\n"); + release_region(piix4_smba, SMBIOSIZE); + return -ENODEV; + } + } + + if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2)) + dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n"); + else if ((temp & 0x0E) == 0) + dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n"); + else + dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration " + "(or code out of date)!\n"); + + pci_read_config_byte(PIIX4_dev, SMBREV, &temp); + dev_info(&PIIX4_dev->dev, + "SMBus Host Controller at 0x%x, revision %d\n", + piix4_smba, temp); + + return piix4_smba; +} + +static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id, u8 aux) +{ + unsigned short piix4_smba; + unsigned short smba_idx = 0xcd6; + u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status; + u8 i2ccfg, i2ccfg_offset = 0x10; + + /* SB800 and later SMBus does not support forcing address */ + if (force || force_addr) { + dev_err(&PIIX4_dev->dev, "SMBus does not support " + "forcing address!\n"); + return -EINVAL; + } + + /* Determine the address of the SMBus areas */ + if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && + PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + PIIX4_dev->revision >= 0x41) || + (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && + PIIX4_dev->device == 0x790b && + PIIX4_dev->revision >= 0x49)) + smb_en = 0x00; + else + smb_en = (aux) ? 0x28 : 0x2c; + + if (!request_region(smba_idx, 2, "smba_idx")) { + dev_err(&PIIX4_dev->dev, "SMBus base address index region " + "0x%x already in use!\n", smba_idx); + return -EBUSY; + } + outb_p(smb_en, smba_idx); + smba_en_lo = inb_p(smba_idx + 1); + outb_p(smb_en + 1, smba_idx); + smba_en_hi = inb_p(smba_idx + 1); + release_region(smba_idx, 2); + + if (!smb_en) { + smb_en_status = smba_en_lo & 0x10; + piix4_smba = smba_en_hi << 8; + if (aux) + piix4_smba |= 0x20; + } else { + smb_en_status = smba_en_lo & 0x01; + piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; + } + + if (!smb_en_status) { + dev_err(&PIIX4_dev->dev, + "SMBus Host Controller not enabled!\n"); + return -ENODEV; + } + + if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) + return -ENODEV; + + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { + dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", + piix4_smba); + return -EBUSY; + } + + /* Aux SMBus does not support IRQ information */ + if (aux) { + dev_info(&PIIX4_dev->dev, + "Auxiliary SMBus Host Controller at 0x%x\n", + piix4_smba); + return piix4_smba; + } + + /* Request the SMBus I2C bus config region */ + if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { + dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " + "0x%x already in use!\n", piix4_smba + i2ccfg_offset); + release_region(piix4_smba, SMBIOSIZE); + return -EBUSY; + } + i2ccfg = inb_p(piix4_smba + i2ccfg_offset); + release_region(piix4_smba + i2ccfg_offset, 1); + + if (i2ccfg & 1) + dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n"); + else + dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n"); + + dev_info(&PIIX4_dev->dev, + "SMBus Host Controller at 0x%x, revision %d\n", + piix4_smba, i2ccfg >> 4); + + return piix4_smba; +} + +static int piix4_setup_aux(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id, + unsigned short base_reg_addr) +{ + /* Set up auxiliary SMBus controllers found on some + * AMD chipsets e.g. SP5100 (SB700 derivative) */ + + unsigned short piix4_smba; + + /* Read address of auxiliary SMBus controller */ + pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba); + if ((piix4_smba & 1) == 0) { + dev_dbg(&PIIX4_dev->dev, + "Auxiliary SMBus controller not enabled\n"); + return -ENODEV; + } + + piix4_smba &= 0xfff0; + if (piix4_smba == 0) { + dev_dbg(&PIIX4_dev->dev, + "Auxiliary SMBus base address uninitialized\n"); + return -ENODEV; + } + + if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) + return -ENODEV; + + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { + dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x " + "already in use!\n", piix4_smba); + return -EBUSY; + } + + dev_info(&PIIX4_dev->dev, + "Auxiliary SMBus Host Controller at 0x%x\n", + piix4_smba); + + return piix4_smba; +} + +static int piix4_transaction(struct i2c_adapter *piix4_adapter) +{ + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter); + unsigned short piix4_smba = adapdata->smba; + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + /* Make sure the SMBus host is ready to start transmitting */ + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). " + "Resetting...\n", temp); + outb_p(temp, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp); + return -EBUSY; + } else { + dev_dbg(&piix4_adapter->dev, "Successful!\n"); + } + } + + /* start the transaction by setting bit 6 */ + outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + + /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */ + if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */ + msleep(2); + else + msleep(1); + + while ((++timeout < MAX_TIMEOUT) && + ((temp = inb_p(SMBHSTSTS)) & 0x01)) + msleep(1); + + /* If the SMBus is still busy, we give up */ + if (timeout == MAX_TIMEOUT) { + dev_err(&piix4_adapter->dev, "SMBus Timeout!\n"); + result = -ETIMEDOUT; + } + + if (temp & 0x10) { + result = -EIO; + dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n"); + } + + if (temp & 0x08) { + result = -EIO; + dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be " + "locked until next hard reset. (sorry!)\n"); + /* Clock stops and slave is stuck in mid-transmission */ + } + + if (temp & 0x04) { + result = -ENXIO; + dev_dbg(&piix4_adapter->dev, "Error: no response!\n"); + } + + if (inb_p(SMBHSTSTS) != 0x00) + outb_p(inb(SMBHSTSTS), SMBHSTSTS); + + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_err(&piix4_adapter->dev, "Failed reset at end of " + "transaction (%02x)\n", temp); + } + dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + return result; +} + +/* Return negative errno on error. */ +static s32 piix4_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data * data) +{ + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); + unsigned short piix4_smba = adapdata->smba; + int i, len; + int status; + + switch (size) { + case I2C_SMBUS_QUICK: + outb_p((addr << 1) | read_write, + SMBHSTADD); + size = PIIX4_QUICK; + break; + case I2C_SMBUS_BYTE: + outb_p((addr << 1) | read_write, + SMBHSTADD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD); + size = PIIX4_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb_p((addr << 1) | read_write, + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0); + size = PIIX4_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb_p((addr << 1) | read_write, + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + size = PIIX4_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outb_p((addr << 1) | read_write, + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + outb_p(len, SMBHSTDAT0); + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= len; i++) + outb_p(data->block[i], SMBBLKDAT); + } + size = PIIX4_BLOCK_DATA; + break; + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + + outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + + status = piix4_transaction(adap); + if (status) + return status; + + if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) + return 0; + + + switch (size) { + case PIIX4_BYTE: + case PIIX4_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0); + break; + case PIIX4_WORD_DATA: + data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + break; + case PIIX4_BLOCK_DATA: + data->block[0] = inb_p(SMBHSTDAT0); + if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= data->block[0]; i++) + data->block[i] = inb_p(SMBBLKDAT); + break; + } + return 0; +} + +static u32 piix4_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static const struct i2c_algorithm smbus_algorithm = { + .smbus_xfer = piix4_access, + .functionality = piix4_func, +}; + +static const struct pci_device_id piix4_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x790b) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_OSB4) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB5) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB6) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_HT1000SB) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_HT1100LD) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, piix4_ids); + +static struct i2c_adapter *piix4_main_adapter; +static struct i2c_adapter *piix4_aux_adapter; + +static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, + struct i2c_adapter **padap) +{ + struct i2c_adapter *adap; + struct i2c_piix4_adapdata *adapdata; + int retval; + + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (adap == NULL) { + release_region(smba, SMBIOSIZE); + return -ENOMEM; + } + + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + adap->algo = &smbus_algorithm; + + adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL); + if (adapdata == NULL) { + kfree(adap); + release_region(smba, SMBIOSIZE); + return -ENOMEM; + } + + adapdata->smba = smba; + + /* set up the sysfs linkage to our parent device */ + adap->dev.parent = &dev->dev; + + snprintf(adap->name, sizeof(adap->name), + "SMBus PIIX4 adapter at %04x", smba); + + i2c_set_adapdata(adap, adapdata); + + retval = i2c_add_adapter(adap); + if (retval) { + dev_err(&dev->dev, "Couldn't register adapter!\n"); + kfree(adapdata); + kfree(adap); + release_region(smba, SMBIOSIZE); + return retval; + } + + *padap = adap; + return 0; +} + +static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + + if ((dev->vendor == PCI_VENDOR_ID_ATI && + dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && + dev->revision >= 0x40) || + dev->vendor == PCI_VENDOR_ID_AMD) + /* base address location etc changed in SB800 */ + retval = piix4_setup_sb800(dev, id, 0); + else + retval = piix4_setup(dev, id); + + /* If no main SMBus found, give up */ + if (retval < 0) + return retval; + + /* Try to register main SMBus adapter, give up if we can't */ + retval = piix4_add_adapter(dev, retval, &piix4_main_adapter); + if (retval < 0) + return retval; + + /* Check for auxiliary SMBus on some AMD chipsets */ + retval = -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_ATI && + dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) { + if (dev->revision < 0x40) { + retval = piix4_setup_aux(dev, id, 0x58); + } else { + /* SB800 added aux bus too */ + retval = piix4_setup_sb800(dev, id, 1); + } + } + + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) { + retval = piix4_setup_sb800(dev, id, 1); + } + + if (retval > 0) { + /* Try to add the aux adapter if it exists, + * piix4_add_adapter will clean up if this fails */ + piix4_add_adapter(dev, retval, &piix4_aux_adapter); + } + + return 0; +} + +static void piix4_adap_remove(struct i2c_adapter *adap) +{ + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); + + if (adapdata->smba) { + i2c_del_adapter(adap); + release_region(adapdata->smba, SMBIOSIZE); + kfree(adapdata); + kfree(adap); + } +} + +static void piix4_remove(struct pci_dev *dev) +{ + if (piix4_main_adapter) { + piix4_adap_remove(piix4_main_adapter); + piix4_main_adapter = NULL; + } + + if (piix4_aux_adapter) { + piix4_adap_remove(piix4_aux_adapter); + piix4_aux_adapter = NULL; + } +} + +static struct pci_driver piix4_driver = { + .name = "piix4_smbus", + .id_table = piix4_ids, + .probe = piix4_probe, + .remove = piix4_remove, +}; + +module_pci_driver(piix4_driver); + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " + "Philip Edelbrock <phil@netroedge.com>"); +MODULE_DESCRIPTION("PIIX4 SMBus driver"); +MODULE_LICENSE("GPL"); |