summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/i2c/busses/i2c-iop3xx.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/i2c/busses/i2c-iop3xx.h')
-rw-r--r--kernel/drivers/i2c/busses/i2c-iop3xx.h103
1 files changed, 103 insertions, 0 deletions
diff --git a/kernel/drivers/i2c/busses/i2c-iop3xx.h b/kernel/drivers/i2c/busses/i2c-iop3xx.h
new file mode 100644
index 000000000..2d6929c2b
--- /dev/null
+++ b/kernel/drivers/i2c/busses/i2c-iop3xx.h
@@ -0,0 +1,103 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.h algorithm driver definitions private to i2c-iop3xx.c */
+/* ------------------------------------------------------------------------- */
+/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ * <Peter dot Milne at D hyphen TACQ dot com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, version 2.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details. */
+/* ------------------------------------------------------------------------- */
+
+
+#ifndef I2C_IOP3XX_H
+#define I2C_IOP3XX_H 1
+
+/*
+ * iop321 hardware bit definitions
+ */
+#define IOP3XX_ICR_FAST_MODE 0x8000 /* 1=400kBps, 0=100kBps */
+#define IOP3XX_ICR_UNIT_RESET 0x4000 /* 1=RESET */
+#define IOP3XX_ICR_SAD_IE 0x2000 /* 1=Slave Detect Interrupt Enable */
+#define IOP3XX_ICR_ALD_IE 0x1000 /* 1=Arb Loss Detect Interrupt Enable */
+#define IOP3XX_ICR_SSD_IE 0x0800 /* 1=Slave STOP Detect Interrupt Enable */
+#define IOP3XX_ICR_BERR_IE 0x0400 /* 1=Bus Error Interrupt Enable */
+#define IOP3XX_ICR_RXFULL_IE 0x0200 /* 1=Receive Full Interrupt Enable */
+#define IOP3XX_ICR_TXEMPTY_IE 0x0100 /* 1=Transmit Empty Interrupt Enable */
+#define IOP3XX_ICR_GCD 0x0080 /* 1=General Call Disable */
+/*
+ * IOP3XX_ICR_GCD: 1 disables response as slave. "This bit must be set
+ * when sending a master mode general call message from the I2C unit"
+ */
+#define IOP3XX_ICR_UE 0x0040 /* 1=Unit Enable */
+/*
+ * "NOTE: To avoid I2C bus integrity problems,
+ * the user needs to ensure that the GPIO Output Data Register -
+ * GPOD bits associated with an I2C port are cleared prior to setting
+ * the enable bit for that I2C serial port.
+ * The user prepares to enable I2C port 0 and
+ * I2C port 1 by clearing GPOD bits 7:6 and GPOD bits 5:4, respectively.
+ */
+#define IOP3XX_ICR_SCLEN 0x0020 /* 1=SCL enable for master mode */
+#define IOP3XX_ICR_MABORT 0x0010 /* 1=Send a STOP with no data
+ * NB TBYTE must be clear */
+#define IOP3XX_ICR_TBYTE 0x0008 /* 1=Send/Receive a byte. i2c clears */
+#define IOP3XX_ICR_NACK 0x0004 /* 1=reply with NACK */
+#define IOP3XX_ICR_MSTOP 0x0002 /* 1=send a STOP after next data byte */
+#define IOP3XX_ICR_MSTART 0x0001 /* 1=initiate a START */
+
+
+#define IOP3XX_ISR_BERRD 0x0400 /* 1=BUS ERROR Detected */
+#define IOP3XX_ISR_SAD 0x0200 /* 1=Slave ADdress Detected */
+#define IOP3XX_ISR_GCAD 0x0100 /* 1=General Call Address Detected */
+#define IOP3XX_ISR_RXFULL 0x0080 /* 1=Receive Full */
+#define IOP3XX_ISR_TXEMPTY 0x0040 /* 1=Transmit Empty */
+#define IOP3XX_ISR_ALD 0x0020 /* 1=Arbitration Loss Detected */
+#define IOP3XX_ISR_SSD 0x0010 /* 1=Slave STOP Detected */
+#define IOP3XX_ISR_BBUSY 0x0008 /* 1=Bus BUSY */
+#define IOP3XX_ISR_UNITBUSY 0x0004 /* 1=Unit Busy */
+#define IOP3XX_ISR_NACK 0x0002 /* 1=Unit Rx or Tx a NACK */
+#define IOP3XX_ISR_RXREAD 0x0001 /* 1=READ 0=WRITE (R/W bit of slave addr */
+
+#define IOP3XX_ISR_CLEARBITS 0x07f0
+
+#define IOP3XX_ISAR_SAMASK 0x007f
+
+#define IOP3XX_IDBR_MASK 0x00ff
+
+#define IOP3XX_IBMR_SCL 0x0002
+#define IOP3XX_IBMR_SDA 0x0001
+
+#define IOP3XX_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */
+#define IOP3XX_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */
+
+#define MYSAR 0 /* default slave address */
+
+#define I2C_ERR 321
+#define I2C_ERR_BERR (I2C_ERR+0)
+#define I2C_ERR_ALD (I2C_ERR+1)
+
+
+#define CR_OFFSET 0
+#define SR_OFFSET 0x4
+#define SAR_OFFSET 0x8
+#define DBR_OFFSET 0xc
+#define CCR_OFFSET 0x10
+#define BMR_OFFSET 0x14
+
+#define IOP3XX_I2C_IO_SIZE 0x18
+
+struct i2c_algo_iop3xx_data {
+ void __iomem *ioaddr;
+ wait_queue_head_t waitq;
+ spinlock_t lock;
+ u32 SR_enabled, SR_received;
+ int id;
+};
+
+#endif /* I2C_IOP3XX_H */