summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/i2c/busses/i2c-i801.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/i2c/busses/i2c-i801.c')
-rw-r--r--kernel/drivers/i2c/busses/i2c-i801.c1353
1 files changed, 1353 insertions, 0 deletions
diff --git a/kernel/drivers/i2c/busses/i2c-i801.c b/kernel/drivers/i2c/busses/i2c-i801.c
new file mode 100644
index 000000000..5ecbb3fdc
--- /dev/null
+++ b/kernel/drivers/i2c/busses/i2c-i801.c
@@ -0,0 +1,1353 @@
+/*
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
+ <mdsxyz123@yahoo.com>
+ Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de>
+ Copyright (C) 2010 Intel Corporation,
+ David Woodhouse <dwmw2@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+*/
+
+/*
+ * Supports the following Intel I/O Controller Hubs (ICH):
+ *
+ * I/O Block I2C
+ * region SMBus Block proc. block
+ * Chip name PCI ID size PEC buffer call read
+ * ---------------------------------------------------------------------------
+ * 82801AA (ICH) 0x2413 16 no no no no
+ * 82801AB (ICH0) 0x2423 16 no no no no
+ * 82801BA (ICH2) 0x2443 16 no no no no
+ * 82801CA (ICH3) 0x2483 32 soft no no no
+ * 82801DB (ICH4) 0x24c3 32 hard yes no no
+ * 82801E (ICH5) 0x24d3 32 hard yes yes yes
+ * 6300ESB 0x25a4 32 hard yes yes yes
+ * 82801F (ICH6) 0x266a 32 hard yes yes yes
+ * 6310ESB/6320ESB 0x269b 32 hard yes yes yes
+ * 82801G (ICH7) 0x27da 32 hard yes yes yes
+ * 82801H (ICH8) 0x283e 32 hard yes yes yes
+ * 82801I (ICH9) 0x2930 32 hard yes yes yes
+ * EP80579 (Tolapai) 0x5032 32 hard yes yes yes
+ * ICH10 0x3a30 32 hard yes yes yes
+ * ICH10 0x3a60 32 hard yes yes yes
+ * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
+ * 6 Series (PCH) 0x1c22 32 hard yes yes yes
+ * Patsburg (PCH) 0x1d22 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
+ * DH89xxCC (PCH) 0x2330 32 hard yes yes yes
+ * Panther Point (PCH) 0x1e22 32 hard yes yes yes
+ * Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
+ * Avoton (SOC) 0x1f3c 32 hard yes yes yes
+ * Wellsburg (PCH) 0x8d22 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
+ * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
+ * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes
+ * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
+ * BayTrail (SOC) 0x0f12 32 hard yes yes yes
+ * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
+ * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
+ *
+ * Features supported by this driver:
+ * Software PEC no
+ * Hardware PEC yes
+ * Block buffer yes
+ * Block process call transaction no
+ * I2C block read transaction yes (doesn't use the block buffer)
+ * Slave mode no
+ * Interrupt processing yes
+ *
+ * See the file Documentation/i2c/busses/i2c-i801 for details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/err.h>
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+#include <linux/gpio.h>
+#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_device.h>
+#endif
+
+/* I801 SMBus address offsets */
+#define SMBHSTSTS(p) (0 + (p)->smba)
+#define SMBHSTCNT(p) (2 + (p)->smba)
+#define SMBHSTCMD(p) (3 + (p)->smba)
+#define SMBHSTADD(p) (4 + (p)->smba)
+#define SMBHSTDAT0(p) (5 + (p)->smba)
+#define SMBHSTDAT1(p) (6 + (p)->smba)
+#define SMBBLKDAT(p) (7 + (p)->smba)
+#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
+#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
+#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
+
+/* PCI Address Constants */
+#define SMBBAR 4
+#define SMBPCICTL 0x004
+#define SMBPCISTS 0x006
+#define SMBHSTCFG 0x040
+
+/* Host status bits for SMBPCISTS */
+#define SMBPCISTS_INTS 0x08
+
+/* Control bits for SMBPCICTL */
+#define SMBPCICTL_INTDIS 0x0400
+
+/* Host configuration bits for SMBHSTCFG */
+#define SMBHSTCFG_HST_EN 1
+#define SMBHSTCFG_SMB_SMI_EN 2
+#define SMBHSTCFG_I2C_EN 4
+
+/* Auxiliary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC 1
+#define SMBAUXCTL_E32B 2
+
+/* Other settings */
+#define MAX_RETRIES 400
+
+/* I801 command constants */
+#define I801_QUICK 0x00
+#define I801_BYTE 0x04
+#define I801_BYTE_DATA 0x08
+#define I801_WORD_DATA 0x0C
+#define I801_PROC_CALL 0x10 /* unimplemented */
+#define I801_BLOCK_DATA 0x14
+#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
+
+/* I801 Host Control register bits */
+#define SMBHSTCNT_INTREN 0x01
+#define SMBHSTCNT_KILL 0x02
+#define SMBHSTCNT_LAST_BYTE 0x20
+#define SMBHSTCNT_START 0x40
+#define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */
+
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE 0x80
+#define SMBHSTSTS_INUSE_STS 0x40
+#define SMBHSTSTS_SMBALERT_STS 0x20
+#define SMBHSTSTS_FAILED 0x10
+#define SMBHSTSTS_BUS_ERR 0x08
+#define SMBHSTSTS_DEV_ERR 0x04
+#define SMBHSTSTS_INTR 0x02
+#define SMBHSTSTS_HOST_BUSY 0x01
+
+#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
+ SMBHSTSTS_DEV_ERR)
+
+#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
+ STATUS_ERROR_FLAGS)
+
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
+/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
+
+struct i801_mux_config {
+ char *gpio_chip;
+ unsigned values[3];
+ int n_values;
+ unsigned classes[3];
+ unsigned gpios[2]; /* Relative to gpio_chip->base */
+ int n_gpios;
+};
+
+struct i801_priv {
+ struct i2c_adapter adapter;
+ unsigned long smba;
+ unsigned char original_hstcfg;
+ struct pci_dev *pci_dev;
+ unsigned int features;
+
+ /* isr processing */
+ wait_queue_head_t waitq;
+ u8 status;
+
+ /* Command state used by isr for byte-by-byte block transactions */
+ u8 cmd;
+ bool is_read;
+ int count;
+ int len;
+ u8 *data;
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+ const struct i801_mux_config *mux_drvdata;
+ struct platform_device *mux_pdev;
+#endif
+};
+
+#define FEATURE_SMBUS_PEC (1 << 0)
+#define FEATURE_BLOCK_BUFFER (1 << 1)
+#define FEATURE_BLOCK_PROC (1 << 2)
+#define FEATURE_I2C_BLOCK_READ (1 << 3)
+#define FEATURE_IRQ (1 << 4)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF (1 << 15)
+
+static const char *i801_feature_names[] = {
+ "SMBus PEC",
+ "Block buffer",
+ "Block process call",
+ "I2C block read",
+ "Interrupt",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
+ "\t\t 0x01 disable SMBus PEC\n"
+ "\t\t 0x02 disable the block buffer\n"
+ "\t\t 0x08 disable the I2C block read functionality\n"
+ "\t\t 0x10 don't use interrupts ");
+
+/* Make sure the SMBus host is ready to start transmitting.
+ Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(struct i801_priv *priv)
+{
+ int status;
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status & SMBHSTSTS_HOST_BUSY) {
+ dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
+ return -EBUSY;
+ }
+
+ status &= STATUS_FLAGS;
+ if (status) {
+ dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
+ status);
+ outb_p(status, SMBHSTSTS(priv));
+ status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+ if (status) {
+ dev_err(&priv->pci_dev->dev,
+ "Failed clearing status flags (%02x)\n",
+ status);
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Convert the status register to an error code, and clear it.
+ * Note that status only contains the bits we want to clear, not the
+ * actual register value.
+ */
+static int i801_check_post(struct i801_priv *priv, int status)
+{
+ int result = 0;
+
+ /*
+ * If the SMBus is still busy, we give up
+ * Note: This timeout condition only happens when using polling
+ * transactions. For interrupt operation, NAK/timeout is indicated by
+ * DEV_ERR.
+ */
+ if (unlikely(status < 0)) {
+ dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
+ /* try to stop the current command */
+ dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+ outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
+ SMBHSTCNT(priv));
+ usleep_range(1000, 2000);
+ outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
+ SMBHSTCNT(priv));
+
+ /* Check if it worked */
+ status = inb_p(SMBHSTSTS(priv));
+ if ((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & SMBHSTSTS_FAILED))
+ dev_err(&priv->pci_dev->dev,
+ "Failed terminating the transaction\n");
+ outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
+ return -ETIMEDOUT;
+ }
+
+ if (status & SMBHSTSTS_FAILED) {
+ result = -EIO;
+ dev_err(&priv->pci_dev->dev, "Transaction failed\n");
+ }
+ if (status & SMBHSTSTS_DEV_ERR) {
+ result = -ENXIO;
+ dev_dbg(&priv->pci_dev->dev, "No response\n");
+ }
+ if (status & SMBHSTSTS_BUS_ERR) {
+ result = -EAGAIN;
+ dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
+ }
+
+ /* Clear status flags except BYTE_DONE, to be cleared by caller */
+ outb_p(status, SMBHSTSTS(priv));
+
+ return result;
+}
+
+/* Wait for BUSY being cleared and either INTR or an error flag being set */
+static int i801_wait_intr(struct i801_priv *priv)
+{
+ int timeout = 0;
+ int status;
+
+ /* We will always wait for a fraction of a second! */
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while (((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) &&
+ (timeout++ < MAX_RETRIES));
+
+ if (timeout > MAX_RETRIES) {
+ dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n");
+ return -ETIMEDOUT;
+ }
+ return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR);
+}
+
+/* Wait for either BYTE_DONE or an error flag being set */
+static int i801_wait_byte_done(struct i801_priv *priv)
+{
+ int timeout = 0;
+ int status;
+
+ /* We will always wait for a fraction of a second! */
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) &&
+ (timeout++ < MAX_RETRIES));
+
+ if (timeout > MAX_RETRIES) {
+ dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n");
+ return -ETIMEDOUT;
+ }
+ return status & STATUS_ERROR_FLAGS;
+}
+
+static int i801_transaction(struct i801_priv *priv, int xact)
+{
+ int status;
+ int result;
+ const struct i2c_adapter *adap = &priv->adapter;
+
+ result = i801_check_pre(priv);
+ if (result < 0)
+ return result;
+
+ if (priv->features & FEATURE_IRQ) {
+ outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
+ SMBHSTCNT(priv));
+ result = wait_event_timeout(priv->waitq,
+ (status = priv->status),
+ adap->timeout);
+ if (!result) {
+ status = -ETIMEDOUT;
+ dev_warn(&priv->pci_dev->dev,
+ "Timeout waiting for interrupt!\n");
+ }
+ priv->status = 0;
+ return i801_check_post(priv, status);
+ }
+
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * SMBSCMD are passed in xact */
+ outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
+
+ status = i801_wait_intr(priv);
+ return i801_check_post(priv, status);
+}
+
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+ union i2c_smbus_data *data,
+ char read_write, int hwpec)
+{
+ int i, len;
+ int status;
+
+ inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+
+ /* Use 32-byte buffer to process this transaction */
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ outb_p(len, SMBHSTDAT0(priv));
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+ }
+
+ status = i801_transaction(priv, I801_BLOCK_DATA |
+ (hwpec ? SMBHSTCNT_PEC_EN : 0));
+ if (status)
+ return status;
+
+ if (read_write == I2C_SMBUS_READ) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+
+ data->block[0] = len;
+ for (i = 0; i < len; i++)
+ data->block[i + 1] = inb_p(SMBBLKDAT(priv));
+ }
+ return 0;
+}
+
+static void i801_isr_byte_done(struct i801_priv *priv)
+{
+ if (priv->is_read) {
+ /* For SMBus block reads, length is received with first byte */
+ if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
+ (priv->count == 0)) {
+ priv->len = inb_p(SMBHSTDAT0(priv));
+ if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->pci_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ priv->len);
+ /* FIXME: Recover */
+ priv->len = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ dev_dbg(&priv->pci_dev->dev,
+ "SMBus block read size is %d\n",
+ priv->len);
+ }
+ priv->data[-1] = priv->len;
+ }
+
+ /* Read next byte */
+ if (priv->count < priv->len)
+ priv->data[priv->count++] = inb(SMBBLKDAT(priv));
+ else
+ dev_dbg(&priv->pci_dev->dev,
+ "Discarding extra byte on block read\n");
+
+ /* Set LAST_BYTE for last byte of read transaction */
+ if (priv->count == priv->len - 1)
+ outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
+ SMBHSTCNT(priv));
+ } else if (priv->count < priv->len - 1) {
+ /* Write next byte, except for IRQ after last byte */
+ outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
+ }
+
+ /* Clear BYTE_DONE to continue with next byte */
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+}
+
+/*
+ * There are two kinds of interrupts:
+ *
+ * 1) i801 signals transaction completion with one of these interrupts:
+ * INTR - Success
+ * DEV_ERR - Invalid command, NAK or communication timeout
+ * BUS_ERR - SMI# transaction collision
+ * FAILED - transaction was canceled due to a KILL request
+ * When any of these occur, update ->status and wake up the waitq.
+ * ->status must be cleared before kicking off the next transaction.
+ *
+ * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
+ * occurs for each byte of a byte-by-byte to prepare the next byte.
+ */
+static irqreturn_t i801_isr(int irq, void *dev_id)
+{
+ struct i801_priv *priv = dev_id;
+ u16 pcists;
+ u8 status;
+
+ /* Confirm this is our interrupt */
+ pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
+ if (!(pcists & SMBPCISTS_INTS))
+ return IRQ_NONE;
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status & SMBHSTSTS_BYTE_DONE)
+ i801_isr_byte_done(priv);
+
+ /*
+ * Clear irq sources and report transaction result.
+ * ->status must be cleared before the next transaction is started.
+ */
+ status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
+ if (status) {
+ outb_p(status, SMBHSTSTS(priv));
+ priv->status |= status;
+ wake_up(&priv->waitq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * For "byte-by-byte" block transactions:
+ * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
+ * I2C read uses cmd=I801_I2C_BLOCK_DATA
+ */
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+ union i2c_smbus_data *data,
+ char read_write, int command,
+ int hwpec)
+{
+ int i, len;
+ int smbcmd;
+ int status;
+ int result;
+ const struct i2c_adapter *adap = &priv->adapter;
+
+ result = i801_check_pre(priv);
+ if (result < 0)
+ return result;
+
+ len = data->block[0];
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(len, SMBHSTDAT0(priv));
+ outb_p(data->block[1], SMBBLKDAT(priv));
+ }
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
+ read_write == I2C_SMBUS_READ)
+ smbcmd = I801_I2C_BLOCK_DATA;
+ else
+ smbcmd = I801_BLOCK_DATA;
+
+ if (priv->features & FEATURE_IRQ) {
+ priv->is_read = (read_write == I2C_SMBUS_READ);
+ if (len == 1 && priv->is_read)
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ priv->cmd = smbcmd | SMBHSTCNT_INTREN;
+ priv->len = len;
+ priv->count = 0;
+ priv->data = &data->block[1];
+
+ outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+ result = wait_event_timeout(priv->waitq,
+ (status = priv->status),
+ adap->timeout);
+ if (!result) {
+ status = -ETIMEDOUT;
+ dev_warn(&priv->pci_dev->dev,
+ "Timeout waiting for interrupt!\n");
+ }
+ priv->status = 0;
+ return i801_check_post(priv, status);
+ }
+
+ for (i = 1; i <= len; i++) {
+ if (i == len && read_write == I2C_SMBUS_READ)
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ outb_p(smbcmd, SMBHSTCNT(priv));
+
+ if (i == 1)
+ outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
+ SMBHSTCNT(priv));
+
+ status = i801_wait_byte_done(priv);
+ if (status)
+ goto exit;
+
+ if (i == 1 && read_write == I2C_SMBUS_READ
+ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->pci_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ len);
+ /* Recover */
+ while (inb_p(SMBHSTSTS(priv)) &
+ SMBHSTSTS_HOST_BUSY)
+ outb_p(SMBHSTSTS_BYTE_DONE,
+ SMBHSTSTS(priv));
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ return -EPROTO;
+ }
+ data->block[0] = len;
+ }
+
+ /* Retrieve/store value in SMBBLKDAT */
+ if (read_write == I2C_SMBUS_READ)
+ data->block[i] = inb_p(SMBBLKDAT(priv));
+ if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+
+ /* signals SMBBLKDAT ready */
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+ }
+
+ status = i801_wait_intr(priv);
+exit:
+ return i801_check_post(priv, status);
+}
+
+static int i801_set_block_buffer_mode(struct i801_priv *priv)
+{
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+ if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
+ return -EIO;
+ return 0;
+}
+
+/* Block transaction function */
+static int i801_block_transaction(struct i801_priv *priv,
+ union i2c_smbus_data *data, char read_write,
+ int command, int hwpec)
+{
+ int result = 0;
+ unsigned char hostc;
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
+ hostc | SMBHSTCFG_I2C_EN);
+ } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+ dev_err(&priv->pci_dev->dev,
+ "I2C block read is unsupported!\n");
+ return -EOPNOTSUPP;
+ }
+ }
+
+ if (read_write == I2C_SMBUS_WRITE
+ || command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (data->block[0] < 1)
+ data->block[0] = 1;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ data->block[0] = 32; /* max for SMBus block reads */
+ }
+
+ /* Experience has shown that the block buffer can only be used for
+ SMBus (not I2C) block transactions, even though the datasheet
+ doesn't mention this limitation. */
+ if ((priv->features & FEATURE_BLOCK_BUFFER)
+ && command != I2C_SMBUS_I2C_BLOCK_DATA
+ && i801_set_block_buffer_mode(priv) == 0)
+ result = i801_block_transaction_by_block(priv, data,
+ read_write, hwpec);
+ else
+ result = i801_block_transaction_byte_by_byte(priv, data,
+ read_write,
+ command, hwpec);
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_WRITE) {
+ /* restore saved configuration register value */
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
+ }
+ return result;
+}
+
+/* Return negative errno on error. */
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ int hwpec;
+ int block = 0;
+ int ret, xact = 0;
+ struct i801_priv *priv = i2c_get_adapdata(adap);
+
+ hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
+ && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ xact = I801_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(command, SMBHSTCMD(priv));
+ xact = I801_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(data->byte, SMBHSTDAT0(priv));
+ xact = I801_BYTE_DATA;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+ }
+ xact = I801_WORD_DATA;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ /* NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading */
+ outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_READ) {
+ /* NB: page 240 of ICH5 datasheet also shows
+ * that DATA1 is the cmd field when reading */
+ outb_p(command, SMBHSTDAT1(priv));
+ } else
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ default:
+ dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+ size);
+ return -EOPNOTSUPP;
+ }
+
+ if (hwpec) /* enable/disable hardware PEC */
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+ else
+ outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+ SMBAUXCTL(priv));
+
+ if (block)
+ ret = i801_block_transaction(priv, data, read_write, size,
+ hwpec);
+ else
+ ret = i801_transaction(priv, xact);
+
+ /* Some BIOSes don't like it when PEC is enabled at reboot or resume
+ time, so we forcibly disable it after every transaction. Turn off
+ E32B for the same reason. */
+ if (hwpec || block)
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+ if (block)
+ return ret;
+ if (ret)
+ return ret;
+ if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
+ return 0;
+
+ switch (xact & 0x7f) {
+ case I801_BYTE: /* Result put in SMBHSTDAT0 */
+ case I801_BYTE_DATA:
+ data->byte = inb_p(SMBHSTDAT0(priv));
+ break;
+ case I801_WORD_DATA:
+ data->word = inb_p(SMBHSTDAT0(priv)) +
+ (inb_p(SMBHSTDAT1(priv)) << 8);
+ break;
+ }
+ return 0;
+}
+
+
+static u32 i801_func(struct i2c_adapter *adapter)
+{
+ struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+ ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+ ((priv->features & FEATURE_I2C_BLOCK_READ) ?
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = i801_access,
+ .functionality = i801_func,
+};
+
+static const struct pci_device_id i801_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, i801_ids);
+
+#if defined CONFIG_X86 && defined CONFIG_DMI
+static unsigned char apanel_addr;
+
+/* Scan the system ROM for the signature "FJKEYINF" */
+static __init const void __iomem *bios_signature(const void __iomem *bios)
+{
+ ssize_t offset;
+ const unsigned char signature[] = "FJKEYINF";
+
+ for (offset = 0; offset < 0x10000; offset += 0x10) {
+ if (check_signature(bios + offset, signature,
+ sizeof(signature)-1))
+ return bios + offset;
+ }
+ return NULL;
+}
+
+static void __init input_apanel_init(void)
+{
+ void __iomem *bios;
+ const void __iomem *p;
+
+ bios = ioremap(0xF0000, 0x10000); /* Can't fail */
+ p = bios_signature(bios);
+ if (p) {
+ /* just use the first address */
+ apanel_addr = readb(p + 8 + 3) >> 1;
+ }
+ iounmap(bios);
+}
+
+struct dmi_onboard_device_info {
+ const char *name;
+ u8 type;
+ unsigned short i2c_addr;
+ const char *i2c_type;
+};
+
+static const struct dmi_onboard_device_info dmi_devices[] = {
+ { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+ { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+ { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+};
+
+static void dmi_check_onboard_device(u8 type, const char *name,
+ struct i2c_adapter *adap)
+{
+ int i;
+ struct i2c_board_info info;
+
+ for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+ /* & ~0x80, ignore enabled/disabled bit */
+ if ((type & ~0x80) != dmi_devices[i].type)
+ continue;
+ if (strcasecmp(name, dmi_devices[i].name))
+ continue;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = dmi_devices[i].i2c_addr;
+ strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+ i2c_new_device(adap, &info);
+ break;
+ }
+}
+
+/* We use our own function to check for onboard devices instead of
+ dmi_find_device() as some buggy BIOS's have the devices we are interested
+ in marked as disabled */
+static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
+{
+ int i, count;
+
+ if (dm->type != 10)
+ return;
+
+ count = (dm->length - sizeof(struct dmi_header)) / 2;
+ for (i = 0; i < count; i++) {
+ const u8 *d = (char *)(dm + 1) + (i * 2);
+ const char *name = ((char *) dm) + dm->length;
+ u8 type = d[0];
+ u8 s = d[1];
+
+ if (!s)
+ continue;
+ s--;
+ while (s > 0 && name[0]) {
+ name += strlen(name) + 1;
+ s--;
+ }
+ if (name[0] == 0) /* Bogus string reference */
+ continue;
+
+ dmi_check_onboard_device(type, name, adap);
+ }
+}
+
+/* Register optional slaves */
+static void i801_probe_optional_slaves(struct i801_priv *priv)
+{
+ /* Only register slaves on main SMBus channel */
+ if (priv->features & FEATURE_IDF)
+ return;
+
+ if (apanel_addr) {
+ struct i2c_board_info info;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = apanel_addr;
+ strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+ i2c_new_device(&priv->adapter, &info);
+ }
+
+ if (dmi_name_in_vendors("FUJITSU"))
+ dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif /* CONFIG_X86 && CONFIG_DMI */
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
+ .gpio_chip = "gpio_ich",
+ .values = { 0x02, 0x03 },
+ .n_values = 2,
+ .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
+ .gpios = { 52, 53 },
+ .n_gpios = 2,
+};
+
+static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
+ .gpio_chip = "gpio_ich",
+ .values = { 0x02, 0x03, 0x01 },
+ .n_values = 3,
+ .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
+ .gpios = { 52, 53 },
+ .n_gpios = 2,
+};
+
+static const struct dmi_system_id mux_dmi_table[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d18,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d18,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ { }
+};
+
+/* Setup multiplexing if needed */
+static int i801_add_mux(struct i801_priv *priv)
+{
+ struct device *dev = &priv->adapter.dev;
+ const struct i801_mux_config *mux_config;
+ struct i2c_mux_gpio_platform_data gpio_data;
+ int err;
+
+ if (!priv->mux_drvdata)
+ return 0;
+ mux_config = priv->mux_drvdata;
+
+ /* Prepare the platform data */
+ memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
+ gpio_data.parent = priv->adapter.nr;
+ gpio_data.values = mux_config->values;
+ gpio_data.n_values = mux_config->n_values;
+ gpio_data.classes = mux_config->classes;
+ gpio_data.gpio_chip = mux_config->gpio_chip;
+ gpio_data.gpios = mux_config->gpios;
+ gpio_data.n_gpios = mux_config->n_gpios;
+ gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+ /* Register the mux device */
+ priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
+ PLATFORM_DEVID_AUTO, &gpio_data,
+ sizeof(struct i2c_mux_gpio_platform_data));
+ if (IS_ERR(priv->mux_pdev)) {
+ err = PTR_ERR(priv->mux_pdev);
+ priv->mux_pdev = NULL;
+ dev_err(dev, "Failed to register i2c-mux-gpio device\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static void i801_del_mux(struct i801_priv *priv)
+{
+ if (priv->mux_pdev)
+ platform_device_unregister(priv->mux_pdev);
+}
+
+static unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+ const struct dmi_system_id *id;
+ const struct i801_mux_config *mux_config;
+ unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ int i;
+
+ id = dmi_first_match(mux_dmi_table);
+ if (id) {
+ /* Remove branch classes from trunk */
+ mux_config = id->driver_data;
+ for (i = 0; i < mux_config->n_values; i++)
+ class &= ~mux_config->classes[i];
+
+ /* Remember for later */
+ priv->mux_drvdata = mux_config;
+ }
+
+ return class;
+}
+#else
+static inline int i801_add_mux(struct i801_priv *priv) { return 0; }
+static inline void i801_del_mux(struct i801_priv *priv) { }
+
+static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+ return I2C_CLASS_HWMON | I2C_CLASS_SPD;
+}
+#endif
+
+static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ unsigned char temp;
+ int err, i;
+ struct i801_priv *priv;
+
+ priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ i2c_set_adapdata(&priv->adapter, priv);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.class = i801_get_adapter_class(priv);
+ priv->adapter.algo = &smbus_algorithm;
+
+ priv->pci_dev = dev;
+ switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
+ priv->features |= FEATURE_IDF;
+ /* fall through */
+ default:
+ priv->features |= FEATURE_I2C_BLOCK_READ;
+ priv->features |= FEATURE_IRQ;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801DB_3:
+ priv->features |= FEATURE_SMBUS_PEC;
+ priv->features |= FEATURE_BLOCK_BUFFER;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801CA_3:
+ case PCI_DEVICE_ID_INTEL_82801BA_2:
+ case PCI_DEVICE_ID_INTEL_82801AB_3:
+ case PCI_DEVICE_ID_INTEL_82801AA_3:
+ break;
+ }
+
+ /* Disable features on user request */
+ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+ if (priv->features & disable_features & (1 << i))
+ dev_notice(&dev->dev, "%s disabled by user\n",
+ i801_feature_names[i]);
+ }
+ priv->features &= ~disable_features;
+
+ err = pcim_enable_device(dev);
+ if (err) {
+ dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
+ err);
+ return err;
+ }
+ pcim_pin_device(dev);
+
+ /* Determine the address of the SMBus area */
+ priv->smba = pci_resource_start(dev, SMBBAR);
+ if (!priv->smba) {
+ dev_err(&dev->dev,
+ "SMBus base address uninitialized, upgrade BIOS\n");
+ return -ENODEV;
+ }
+
+ err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
+ if (err) {
+ return -ENODEV;
+ }
+
+ err = pcim_iomap_regions(dev, 1 << SMBBAR,
+ dev_driver_string(&dev->dev));
+ if (err) {
+ dev_err(&dev->dev,
+ "Failed to request SMBus region 0x%lx-0x%Lx\n",
+ priv->smba,
+ (unsigned long long)pci_resource_end(dev, SMBBAR));
+ return err;
+ }
+
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
+ priv->original_hstcfg = temp;
+ temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
+ if (!(temp & SMBHSTCFG_HST_EN)) {
+ dev_info(&dev->dev, "Enabling SMBus device\n");
+ temp |= SMBHSTCFG_HST_EN;
+ }
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
+
+ if (temp & SMBHSTCFG_SMB_SMI_EN) {
+ dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+ /* Disable SMBus interrupt feature if SMBus using SMI# */
+ priv->features &= ~FEATURE_IRQ;
+ }
+
+ /* Clear special mode bits */
+ if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+ /* Default timeout in interrupt mode: 200 ms */
+ priv->adapter.timeout = HZ / 5;
+
+ if (priv->features & FEATURE_IRQ) {
+ u16 pcictl, pcists;
+
+ /* Complain if an interrupt is already pending */
+ pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
+ if (pcists & SMBPCISTS_INTS)
+ dev_warn(&dev->dev, "An interrupt is pending!\n");
+
+ /* Check if interrupts have been disabled */
+ pci_read_config_word(priv->pci_dev, SMBPCICTL, &pcictl);
+ if (pcictl & SMBPCICTL_INTDIS) {
+ dev_info(&dev->dev, "Interrupts are disabled\n");
+ priv->features &= ~FEATURE_IRQ;
+ }
+ }
+
+ if (priv->features & FEATURE_IRQ) {
+ init_waitqueue_head(&priv->waitq);
+
+ err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
+ IRQF_SHARED,
+ dev_driver_string(&dev->dev), priv);
+ if (err) {
+ dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
+ dev->irq, err);
+ priv->features &= ~FEATURE_IRQ;
+ }
+ }
+ dev_info(&dev->dev, "SMBus using %s\n",
+ priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
+
+ /* set up the sysfs linkage to our parent device */
+ priv->adapter.dev.parent = &dev->dev;
+
+ /* Retry up to 3 times on lost arbitration */
+ priv->adapter.retries = 3;
+
+ snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+ "SMBus I801 adapter at %04lx", priv->smba);
+ err = i2c_add_adapter(&priv->adapter);
+ if (err) {
+ dev_err(&dev->dev, "Failed to add SMBus adapter\n");
+ return err;
+ }
+
+ i801_probe_optional_slaves(priv);
+ /* We ignore errors - multiplexing is optional */
+ i801_add_mux(priv);
+
+ pci_set_drvdata(dev, priv);
+
+ return 0;
+}
+
+static void i801_remove(struct pci_dev *dev)
+{
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ i801_del_mux(priv);
+ i2c_del_adapter(&priv->adapter);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+
+ /*
+ * do not call pci_disable_device(dev) since it can cause hard hangs on
+ * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
+ */
+}
+
+#ifdef CONFIG_PM
+static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
+{
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ pci_save_state(dev);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+ pci_set_power_state(dev, pci_choose_state(dev, mesg));
+ return 0;
+}
+
+static int i801_resume(struct pci_dev *dev)
+{
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+ return 0;
+}
+#else
+#define i801_suspend NULL
+#define i801_resume NULL
+#endif
+
+static struct pci_driver i801_driver = {
+ .name = "i801_smbus",
+ .id_table = i801_ids,
+ .probe = i801_probe,
+ .remove = i801_remove,
+ .suspend = i801_suspend,
+ .resume = i801_resume,
+};
+
+static int __init i2c_i801_init(void)
+{
+ if (dmi_name_in_vendors("FUJITSU"))
+ input_apanel_init();
+ return pci_register_driver(&i801_driver);
+}
+
+static void __exit i2c_i801_exit(void)
+{
+ pci_unregister_driver(&i801_driver);
+}
+
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("I801 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i801_init);
+module_exit(i2c_i801_exit);