summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/i2c/busses/i2c-at91.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/i2c/busses/i2c-at91.c')
-rw-r--r--kernel/drivers/i2c/busses/i2c-at91.c895
1 files changed, 895 insertions, 0 deletions
diff --git a/kernel/drivers/i2c/busses/i2c-at91.c b/kernel/drivers/i2c/busses/i2c-at91.c
new file mode 100644
index 000000000..ff23d1bdd
--- /dev/null
+++ b/kernel/drivers/i2c/busses/i2c-at91.c
@@ -0,0 +1,895 @@
+/*
+ * i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+ *
+ * Copyright (C) 2011 Weinmann Medical GmbH
+ * Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ * Evolved from original work by:
+ * Copyright (C) 2004 Rick Bronson
+ * Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+ *
+ * Borrowed heavily from original work by:
+ * Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+#define DEFAULT_TWI_CLK_HZ 100000 /* max 400 Kbits/s */
+#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */
+#define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */
+#define AUTOSUSPEND_TIMEOUT 2000
+
+/* AT91 TWI register definitions */
+#define AT91_TWI_CR 0x0000 /* Control Register */
+#define AT91_TWI_START 0x0001 /* Send a Start Condition */
+#define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */
+#define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */
+#define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */
+#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */
+#define AT91_TWI_SWRST 0x0080 /* Software Reset */
+
+#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
+#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */
+#define AT91_TWI_MREAD 0x1000 /* Master Read Direction */
+
+#define AT91_TWI_IADR 0x000c /* Internal Address Register */
+
+#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */
+
+#define AT91_TWI_SR 0x0020 /* Status Register */
+#define AT91_TWI_TXCOMP 0x0001 /* Transmission Complete */
+#define AT91_TWI_RXRDY 0x0002 /* Receive Holding Register Ready */
+#define AT91_TWI_TXRDY 0x0004 /* Transmit Holding Register Ready */
+
+#define AT91_TWI_OVRE 0x0040 /* Overrun Error */
+#define AT91_TWI_UNRE 0x0080 /* Underrun Error */
+#define AT91_TWI_NACK 0x0100 /* Not Acknowledged */
+
+#define AT91_TWI_IER 0x0024 /* Interrupt Enable Register */
+#define AT91_TWI_IDR 0x0028 /* Interrupt Disable Register */
+#define AT91_TWI_IMR 0x002c /* Interrupt Mask Register */
+#define AT91_TWI_RHR 0x0030 /* Receive Holding Register */
+#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */
+
+struct at91_twi_pdata {
+ unsigned clk_max_div;
+ unsigned clk_offset;
+ bool has_unre_flag;
+ struct at_dma_slave dma_slave;
+};
+
+struct at91_twi_dma {
+ struct dma_chan *chan_rx;
+ struct dma_chan *chan_tx;
+ struct scatterlist sg;
+ struct dma_async_tx_descriptor *data_desc;
+ enum dma_data_direction direction;
+ bool buf_mapped;
+ bool xfer_in_progress;
+};
+
+struct at91_twi_dev {
+ struct device *dev;
+ void __iomem *base;
+ struct completion cmd_complete;
+ struct clk *clk;
+ u8 *buf;
+ size_t buf_len;
+ struct i2c_msg *msg;
+ int irq;
+ unsigned imr;
+ unsigned transfer_status;
+ struct i2c_adapter adapter;
+ unsigned twi_cwgr_reg;
+ struct at91_twi_pdata *pdata;
+ bool use_dma;
+ bool recv_len_abort;
+ struct at91_twi_dma dma;
+};
+
+static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
+{
+ return readl_relaxed(dev->base + reg);
+}
+
+static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
+{
+ writel_relaxed(val, dev->base + reg);
+}
+
+static void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
+{
+ at91_twi_write(dev, AT91_TWI_IDR,
+ AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY);
+}
+
+static void at91_twi_irq_save(struct at91_twi_dev *dev)
+{
+ dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & 0x7;
+ at91_disable_twi_interrupts(dev);
+}
+
+static void at91_twi_irq_restore(struct at91_twi_dev *dev)
+{
+ at91_twi_write(dev, AT91_TWI_IER, dev->imr);
+}
+
+static void at91_init_twi_bus(struct at91_twi_dev *dev)
+{
+ at91_disable_twi_interrupts(dev);
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN);
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS);
+ at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
+}
+
+/*
+ * Calculate symmetric clock as stated in datasheet:
+ * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
+ */
+static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
+{
+ int ckdiv, cdiv, div;
+ struct at91_twi_pdata *pdata = dev->pdata;
+ int offset = pdata->clk_offset;
+ int max_ckdiv = pdata->clk_max_div;
+
+ div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk),
+ 2 * twi_clk) - offset);
+ ckdiv = fls(div >> 8);
+ cdiv = div >> ckdiv;
+
+ if (ckdiv > max_ckdiv) {
+ dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n",
+ ckdiv, max_ckdiv);
+ ckdiv = max_ckdiv;
+ cdiv = 255;
+ }
+
+ dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv;
+ dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv);
+}
+
+static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
+{
+ struct at91_twi_dma *dma = &dev->dma;
+
+ at91_twi_irq_save(dev);
+
+ if (dma->xfer_in_progress) {
+ if (dma->direction == DMA_FROM_DEVICE)
+ dmaengine_terminate_all(dma->chan_rx);
+ else
+ dmaengine_terminate_all(dma->chan_tx);
+ dma->xfer_in_progress = false;
+ }
+ if (dma->buf_mapped) {
+ dma_unmap_single(dev->dev, sg_dma_address(&dma->sg),
+ dev->buf_len, dma->direction);
+ dma->buf_mapped = false;
+ }
+
+ at91_twi_irq_restore(dev);
+}
+
+static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
+{
+ if (dev->buf_len <= 0)
+ return;
+
+ at91_twi_write(dev, AT91_TWI_THR, *dev->buf);
+
+ /* send stop when last byte has been written */
+ if (--dev->buf_len == 0)
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+
+ dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+
+ ++dev->buf;
+}
+
+static void at91_twi_write_data_dma_callback(void *data)
+{
+ struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
+
+ dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
+ dev->buf_len, DMA_TO_DEVICE);
+
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+}
+
+static void at91_twi_write_data_dma(struct at91_twi_dev *dev)
+{
+ dma_addr_t dma_addr;
+ struct dma_async_tx_descriptor *txdesc;
+ struct at91_twi_dma *dma = &dev->dma;
+ struct dma_chan *chan_tx = dma->chan_tx;
+
+ if (dev->buf_len <= 0)
+ return;
+
+ dma->direction = DMA_TO_DEVICE;
+
+ at91_twi_irq_save(dev);
+ dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev->dev, dma_addr)) {
+ dev_err(dev->dev, "dma map failed\n");
+ return;
+ }
+ dma->buf_mapped = true;
+ at91_twi_irq_restore(dev);
+ sg_dma_len(&dma->sg) = dev->buf_len;
+ sg_dma_address(&dma->sg) = dma_addr;
+
+ txdesc = dmaengine_prep_slave_sg(chan_tx, &dma->sg, 1, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc) {
+ dev_err(dev->dev, "dma prep slave sg failed\n");
+ goto error;
+ }
+
+ txdesc->callback = at91_twi_write_data_dma_callback;
+ txdesc->callback_param = dev;
+
+ dma->xfer_in_progress = true;
+ dmaengine_submit(txdesc);
+ dma_async_issue_pending(chan_tx);
+
+ return;
+
+error:
+ at91_twi_dma_cleanup(dev);
+}
+
+static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
+{
+ if (dev->buf_len <= 0)
+ return;
+
+ *dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff;
+ --dev->buf_len;
+
+ /* return if aborting, we only needed to read RHR to clear RXRDY*/
+ if (dev->recv_len_abort)
+ return;
+
+ /* handle I2C_SMBUS_BLOCK_DATA */
+ if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
+ /* ensure length byte is a valid value */
+ if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
+ dev->msg->flags &= ~I2C_M_RECV_LEN;
+ dev->buf_len += *dev->buf;
+ dev->msg->len = dev->buf_len + 1;
+ dev_dbg(dev->dev, "received block length %d\n",
+ dev->buf_len);
+ } else {
+ /* abort and send the stop by reading one more byte */
+ dev->recv_len_abort = true;
+ dev->buf_len = 1;
+ }
+ }
+
+ /* send stop if second but last byte has been read */
+ if (dev->buf_len == 1)
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+
+ dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+
+ ++dev->buf;
+}
+
+static void at91_twi_read_data_dma_callback(void *data)
+{
+ struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
+
+ dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
+ dev->buf_len, DMA_FROM_DEVICE);
+
+ /* The last two bytes have to be read without using dma */
+ dev->buf += dev->buf_len - 2;
+ dev->buf_len = 2;
+ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_RXRDY);
+}
+
+static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
+{
+ dma_addr_t dma_addr;
+ struct dma_async_tx_descriptor *rxdesc;
+ struct at91_twi_dma *dma = &dev->dma;
+ struct dma_chan *chan_rx = dma->chan_rx;
+
+ dma->direction = DMA_FROM_DEVICE;
+
+ /* Keep in mind that we won't use dma to read the last two bytes */
+ at91_twi_irq_save(dev);
+ dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len - 2,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev->dev, dma_addr)) {
+ dev_err(dev->dev, "dma map failed\n");
+ return;
+ }
+ dma->buf_mapped = true;
+ at91_twi_irq_restore(dev);
+ dma->sg.dma_address = dma_addr;
+ sg_dma_len(&dma->sg) = dev->buf_len - 2;
+
+ rxdesc = dmaengine_prep_slave_sg(chan_rx, &dma->sg, 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!rxdesc) {
+ dev_err(dev->dev, "dma prep slave sg failed\n");
+ goto error;
+ }
+
+ rxdesc->callback = at91_twi_read_data_dma_callback;
+ rxdesc->callback_param = dev;
+
+ dma->xfer_in_progress = true;
+ dmaengine_submit(rxdesc);
+ dma_async_issue_pending(dma->chan_rx);
+
+ return;
+
+error:
+ at91_twi_dma_cleanup(dev);
+}
+
+static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
+{
+ struct at91_twi_dev *dev = dev_id;
+ const unsigned status = at91_twi_read(dev, AT91_TWI_SR);
+ const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR);
+
+ if (!irqstatus)
+ return IRQ_NONE;
+ else if (irqstatus & AT91_TWI_RXRDY)
+ at91_twi_read_next_byte(dev);
+ else if (irqstatus & AT91_TWI_TXRDY)
+ at91_twi_write_next_byte(dev);
+
+ /* catch error flags */
+ dev->transfer_status |= status;
+
+ if (irqstatus & AT91_TWI_TXCOMP) {
+ at91_disable_twi_interrupts(dev);
+ complete(&dev->cmd_complete);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int at91_do_twi_transfer(struct at91_twi_dev *dev)
+{
+ int ret;
+ unsigned long time_left;
+ bool has_unre_flag = dev->pdata->has_unre_flag;
+
+ dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
+ (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
+
+ reinit_completion(&dev->cmd_complete);
+ dev->transfer_status = 0;
+
+ if (!dev->buf_len) {
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+ } else if (dev->msg->flags & I2C_M_RD) {
+ unsigned start_flags = AT91_TWI_START;
+
+ if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {
+ dev_err(dev->dev, "RXRDY still set!");
+ at91_twi_read(dev, AT91_TWI_RHR);
+ }
+
+ /* if only one byte is to be read, immediately stop transfer */
+ if (dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN))
+ start_flags |= AT91_TWI_STOP;
+ at91_twi_write(dev, AT91_TWI_CR, start_flags);
+ /*
+ * When using dma, the last byte has to be read manually in
+ * order to not send the stop command too late and then
+ * to receive extra data. In practice, there are some issues
+ * if you use the dma to read n-1 bytes because of latency.
+ * Reading n-2 bytes with dma and the two last ones manually
+ * seems to be the best solution.
+ */
+ if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+ at91_twi_read_data_dma(dev);
+ /*
+ * It is important to enable TXCOMP irq here because
+ * doing it only when transferring the last two bytes
+ * will mask NACK errors since TXCOMP is set when a
+ * NACK occurs.
+ */
+ at91_twi_write(dev, AT91_TWI_IER,
+ AT91_TWI_TXCOMP);
+ } else
+ at91_twi_write(dev, AT91_TWI_IER,
+ AT91_TWI_TXCOMP | AT91_TWI_RXRDY);
+ } else {
+ if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+ at91_twi_write_data_dma(dev);
+ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+ } else {
+ at91_twi_write_next_byte(dev);
+ at91_twi_write(dev, AT91_TWI_IER,
+ AT91_TWI_TXCOMP | AT91_TWI_TXRDY);
+ }
+ }
+
+ time_left = wait_for_completion_timeout(&dev->cmd_complete,
+ dev->adapter.timeout);
+ if (time_left == 0) {
+ dev_err(dev->dev, "controller timed out\n");
+ at91_init_twi_bus(dev);
+ ret = -ETIMEDOUT;
+ goto error;
+ }
+ if (dev->transfer_status & AT91_TWI_NACK) {
+ dev_dbg(dev->dev, "received nack\n");
+ ret = -EREMOTEIO;
+ goto error;
+ }
+ if (dev->transfer_status & AT91_TWI_OVRE) {
+ dev_err(dev->dev, "overrun while reading\n");
+ ret = -EIO;
+ goto error;
+ }
+ if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) {
+ dev_err(dev->dev, "underrun while writing\n");
+ ret = -EIO;
+ goto error;
+ }
+ if (dev->recv_len_abort) {
+ dev_err(dev->dev, "invalid smbus block length recvd\n");
+ ret = -EPROTO;
+ goto error;
+ }
+
+ dev_dbg(dev->dev, "transfer complete\n");
+
+ return 0;
+
+error:
+ at91_twi_dma_cleanup(dev);
+ return ret;
+}
+
+static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
+{
+ struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+ int ret;
+ unsigned int_addr_flag = 0;
+ struct i2c_msg *m_start = msg;
+
+ dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
+
+ ret = pm_runtime_get_sync(dev->dev);
+ if (ret < 0)
+ goto out;
+
+ if (num == 2) {
+ int internal_address = 0;
+ int i;
+
+ /* 1st msg is put into the internal address, start with 2nd */
+ m_start = &msg[1];
+ for (i = 0; i < msg->len; ++i) {
+ const unsigned addr = msg->buf[msg->len - 1 - i];
+
+ internal_address |= addr << (8 * i);
+ int_addr_flag += AT91_TWI_IADRSZ_1;
+ }
+ at91_twi_write(dev, AT91_TWI_IADR, internal_address);
+ }
+
+ at91_twi_write(dev, AT91_TWI_MMR, (m_start->addr << 16) | int_addr_flag
+ | ((m_start->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0));
+
+ dev->buf_len = m_start->len;
+ dev->buf = m_start->buf;
+ dev->msg = m_start;
+ dev->recv_len_abort = false;
+
+ ret = at91_do_twi_transfer(dev);
+
+ ret = (ret < 0) ? ret : num;
+out:
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+
+ return ret;
+}
+
+/*
+ * The hardware can handle at most two messages concatenated by a
+ * repeated start via it's internal address feature.
+ */
+static struct i2c_adapter_quirks at91_twi_quirks = {
+ .flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
+ .max_comb_1st_msg_len = 3,
+};
+
+static u32 at91_twi_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static struct i2c_algorithm at91_twi_algorithm = {
+ .master_xfer = at91_twi_xfer,
+ .functionality = at91_twi_func,
+};
+
+static struct at91_twi_pdata at91rm9200_config = {
+ .clk_max_div = 5,
+ .clk_offset = 3,
+ .has_unre_flag = true,
+};
+
+static struct at91_twi_pdata at91sam9261_config = {
+ .clk_max_div = 5,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+};
+
+static struct at91_twi_pdata at91sam9260_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+};
+
+static struct at91_twi_pdata at91sam9g20_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+};
+
+static struct at91_twi_pdata at91sam9g10_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+};
+
+static const struct platform_device_id at91_twi_devtypes[] = {
+ {
+ .name = "i2c-at91rm9200",
+ .driver_data = (unsigned long) &at91rm9200_config,
+ }, {
+ .name = "i2c-at91sam9261",
+ .driver_data = (unsigned long) &at91sam9261_config,
+ }, {
+ .name = "i2c-at91sam9260",
+ .driver_data = (unsigned long) &at91sam9260_config,
+ }, {
+ .name = "i2c-at91sam9g20",
+ .driver_data = (unsigned long) &at91sam9g20_config,
+ }, {
+ .name = "i2c-at91sam9g10",
+ .driver_data = (unsigned long) &at91sam9g10_config,
+ }, {
+ /* sentinel */
+ }
+};
+
+#if defined(CONFIG_OF)
+static struct at91_twi_pdata at91sam9x5_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+};
+
+static const struct of_device_id atmel_twi_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-i2c",
+ .data = &at91rm9200_config,
+ } , {
+ .compatible = "atmel,at91sam9260-i2c",
+ .data = &at91sam9260_config,
+ } , {
+ .compatible = "atmel,at91sam9261-i2c",
+ .data = &at91sam9261_config,
+ } , {
+ .compatible = "atmel,at91sam9g20-i2c",
+ .data = &at91sam9g20_config,
+ } , {
+ .compatible = "atmel,at91sam9g10-i2c",
+ .data = &at91sam9g10_config,
+ }, {
+ .compatible = "atmel,at91sam9x5-i2c",
+ .data = &at91sam9x5_config,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
+#endif
+
+static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
+{
+ int ret = 0;
+ struct dma_slave_config slave_config;
+ struct at91_twi_dma *dma = &dev->dma;
+
+ memset(&slave_config, 0, sizeof(slave_config));
+ slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
+ slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ slave_config.src_maxburst = 1;
+ slave_config.dst_addr = (dma_addr_t)phy_addr + AT91_TWI_THR;
+ slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ slave_config.dst_maxburst = 1;
+ slave_config.device_fc = false;
+
+ dma->chan_tx = dma_request_slave_channel_reason(dev->dev, "tx");
+ if (IS_ERR(dma->chan_tx)) {
+ ret = PTR_ERR(dma->chan_tx);
+ dma->chan_tx = NULL;
+ goto error;
+ }
+
+ dma->chan_rx = dma_request_slave_channel_reason(dev->dev, "rx");
+ if (IS_ERR(dma->chan_rx)) {
+ ret = PTR_ERR(dma->chan_rx);
+ dma->chan_rx = NULL;
+ goto error;
+ }
+
+ slave_config.direction = DMA_MEM_TO_DEV;
+ if (dmaengine_slave_config(dma->chan_tx, &slave_config)) {
+ dev_err(dev->dev, "failed to configure tx channel\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ slave_config.direction = DMA_DEV_TO_MEM;
+ if (dmaengine_slave_config(dma->chan_rx, &slave_config)) {
+ dev_err(dev->dev, "failed to configure rx channel\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ sg_init_table(&dma->sg, 1);
+ dma->buf_mapped = false;
+ dma->xfer_in_progress = false;
+ dev->use_dma = true;
+
+ dev_info(dev->dev, "using %s (tx) and %s (rx) for DMA transfers\n",
+ dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
+
+ return ret;
+
+error:
+ if (ret != -EPROBE_DEFER)
+ dev_info(dev->dev, "can't use DMA, error %d\n", ret);
+ if (dma->chan_rx)
+ dma_release_channel(dma->chan_rx);
+ if (dma->chan_tx)
+ dma_release_channel(dma->chan_tx);
+ return ret;
+}
+
+static struct at91_twi_pdata *at91_twi_get_driver_data(
+ struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
+ if (!match)
+ return NULL;
+ return (struct at91_twi_pdata *)match->data;
+ }
+ return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
+}
+
+static int at91_twi_probe(struct platform_device *pdev)
+{
+ struct at91_twi_dev *dev;
+ struct resource *mem;
+ int rc;
+ u32 phy_addr;
+ u32 bus_clk_rate;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ init_completion(&dev->cmd_complete);
+ dev->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENODEV;
+ phy_addr = mem->start;
+
+ dev->pdata = at91_twi_get_driver_data(pdev);
+ if (!dev->pdata)
+ return -ENODEV;
+
+ dev->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(dev->base))
+ return PTR_ERR(dev->base);
+
+ dev->irq = platform_get_irq(pdev, 0);
+ if (dev->irq < 0)
+ return dev->irq;
+
+ rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0,
+ dev_name(dev->dev), dev);
+ if (rc) {
+ dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc);
+ return rc;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ dev->clk = devm_clk_get(dev->dev, NULL);
+ if (IS_ERR(dev->clk)) {
+ dev_err(dev->dev, "no clock defined\n");
+ return -ENODEV;
+ }
+ clk_prepare_enable(dev->clk);
+
+ if (dev->dev->of_node) {
+ rc = at91_twi_configure_dma(dev, phy_addr);
+ if (rc == -EPROBE_DEFER)
+ return rc;
+ }
+
+ rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
+ &bus_clk_rate);
+ if (rc)
+ bus_clk_rate = DEFAULT_TWI_CLK_HZ;
+
+ at91_calc_twi_clock(dev, bus_clk_rate);
+ at91_init_twi_bus(dev);
+
+ snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
+ i2c_set_adapdata(&dev->adapter, dev);
+ dev->adapter.owner = THIS_MODULE;
+ dev->adapter.class = I2C_CLASS_DEPRECATED;
+ dev->adapter.algo = &at91_twi_algorithm;
+ dev->adapter.quirks = &at91_twi_quirks;
+ dev->adapter.dev.parent = dev->dev;
+ dev->adapter.nr = pdev->id;
+ dev->adapter.timeout = AT91_I2C_TIMEOUT;
+ dev->adapter.dev.of_node = pdev->dev.of_node;
+
+ pm_runtime_set_autosuspend_delay(dev->dev, AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(dev->dev);
+ pm_runtime_set_active(dev->dev);
+ pm_runtime_enable(dev->dev);
+
+ rc = i2c_add_numbered_adapter(&dev->adapter);
+ if (rc) {
+ dev_err(dev->dev, "Adapter %s registration failed\n",
+ dev->adapter.name);
+ clk_disable_unprepare(dev->clk);
+
+ pm_runtime_disable(dev->dev);
+ pm_runtime_set_suspended(dev->dev);
+
+ return rc;
+ }
+
+ dev_info(dev->dev, "AT91 i2c bus driver.\n");
+ return 0;
+}
+
+static int at91_twi_remove(struct platform_device *pdev)
+{
+ struct at91_twi_dev *dev = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&dev->adapter);
+ clk_disable_unprepare(dev->clk);
+
+ pm_runtime_disable(dev->dev);
+ pm_runtime_set_suspended(dev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int at91_twi_runtime_suspend(struct device *dev)
+{
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(twi_dev->clk);
+
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int at91_twi_runtime_resume(struct device *dev)
+{
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+ pinctrl_pm_select_default_state(dev);
+
+ return clk_prepare_enable(twi_dev->clk);
+}
+
+static int at91_twi_suspend_noirq(struct device *dev)
+{
+ if (!pm_runtime_status_suspended(dev))
+ at91_twi_runtime_suspend(dev);
+
+ return 0;
+}
+
+static int at91_twi_resume_noirq(struct device *dev)
+{
+ int ret;
+
+ if (!pm_runtime_status_suspended(dev)) {
+ ret = at91_twi_runtime_resume(dev);
+ if (ret)
+ return ret;
+ }
+
+ pm_runtime_mark_last_busy(dev);
+ pm_request_autosuspend(dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops at91_twi_pm = {
+ .suspend_noirq = at91_twi_suspend_noirq,
+ .resume_noirq = at91_twi_resume_noirq,
+ .runtime_suspend = at91_twi_runtime_suspend,
+ .runtime_resume = at91_twi_runtime_resume,
+};
+
+#define at91_twi_pm_ops (&at91_twi_pm)
+#else
+#define at91_twi_pm_ops NULL
+#endif
+
+static struct platform_driver at91_twi_driver = {
+ .probe = at91_twi_probe,
+ .remove = at91_twi_remove,
+ .id_table = at91_twi_devtypes,
+ .driver = {
+ .name = "at91_i2c",
+ .of_match_table = of_match_ptr(atmel_twi_dt_ids),
+ .pm = at91_twi_pm_ops,
+ },
+};
+
+static int __init at91_twi_init(void)
+{
+ return platform_driver_register(&at91_twi_driver);
+}
+
+static void __exit at91_twi_exit(void)
+{
+ platform_driver_unregister(&at91_twi_driver);
+}
+
+subsys_initcall(at91_twi_init);
+module_exit(at91_twi_exit);
+
+MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>");
+MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_i2c");