summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/i2c/busses/i2c-ali1563.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/i2c/busses/i2c-ali1563.c')
-rw-r--r--kernel/drivers/i2c/busses/i2c-ali1563.c443
1 files changed, 443 insertions, 0 deletions
diff --git a/kernel/drivers/i2c/busses/i2c-ali1563.c b/kernel/drivers/i2c/busses/i2c-ali1563.c
new file mode 100644
index 000000000..15517d78d
--- /dev/null
+++ b/kernel/drivers/i2c/busses/i2c-ali1563.c
@@ -0,0 +1,443 @@
+/**
+ * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
+ *
+ * Copyright (C) 2004 Patrick Mochel
+ * 2005 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * The 1563 southbridge is deceptively similar to the 1533, with a
+ * few notable exceptions. One of those happens to be the fact they
+ * upgraded the i2c core to be 2.0 compliant, and happens to be almost
+ * identical to the i2c controller found in the Intel 801 south
+ * bridges.
+ *
+ * This driver is based on a mix of the 15x3, 1535, and i801 drivers,
+ * with a little help from the ALi 1563 spec.
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/acpi.h>
+
+#define ALI1563_MAX_TIMEOUT 500
+#define ALI1563_SMBBA 0x80
+#define ALI1563_SMB_IOEN 1
+#define ALI1563_SMB_HOSTEN 2
+#define ALI1563_SMB_IOSIZE 16
+
+#define SMB_HST_STS (ali1563_smba + 0)
+#define SMB_HST_CNTL1 (ali1563_smba + 1)
+#define SMB_HST_CNTL2 (ali1563_smba + 2)
+#define SMB_HST_CMD (ali1563_smba + 3)
+#define SMB_HST_ADD (ali1563_smba + 4)
+#define SMB_HST_DAT0 (ali1563_smba + 5)
+#define SMB_HST_DAT1 (ali1563_smba + 6)
+#define SMB_BLK_DAT (ali1563_smba + 7)
+
+#define HST_STS_BUSY 0x01
+#define HST_STS_INTR 0x02
+#define HST_STS_DEVERR 0x04
+#define HST_STS_BUSERR 0x08
+#define HST_STS_FAIL 0x10
+#define HST_STS_DONE 0x80
+#define HST_STS_BAD 0x1c
+
+
+#define HST_CNTL1_TIMEOUT 0x80
+#define HST_CNTL1_LAST 0x40
+
+#define HST_CNTL2_KILL 0x04
+#define HST_CNTL2_START 0x40
+#define HST_CNTL2_QUICK 0x00
+#define HST_CNTL2_BYTE 0x01
+#define HST_CNTL2_BYTE_DATA 0x02
+#define HST_CNTL2_WORD_DATA 0x03
+#define HST_CNTL2_BLOCK 0x05
+
+
+#define HST_CNTL2_SIZEMASK 0x38
+
+static struct pci_driver ali1563_pci_driver;
+static unsigned short ali1563_smba;
+
+static int ali1563_transaction(struct i2c_adapter *a, int size)
+{
+ u32 data;
+ int timeout;
+ int status = -EIO;
+
+ dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
+ "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+ inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+ inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+ inb_p(SMB_HST_DAT1));
+
+ data = inb_p(SMB_HST_STS);
+ if (data & HST_STS_BAD) {
+ dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
+ outb_p(data | HST_STS_BAD, SMB_HST_STS);
+ data = inb_p(SMB_HST_STS);
+ if (data & HST_STS_BAD)
+ return -EBUSY;
+ }
+ outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
+
+ timeout = ALI1563_MAX_TIMEOUT;
+ do {
+ msleep(1);
+ } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+
+ dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
+ "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+ inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+ inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+ inb_p(SMB_HST_DAT1));
+
+ if (timeout && !(data & HST_STS_BAD))
+ return 0;
+
+ if (!timeout) {
+ dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
+ /* Issue 'kill' to host controller */
+ outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2);
+ data = inb_p(SMB_HST_STS);
+ status = -ETIMEDOUT;
+ }
+
+ /* device error - no response, ignore the autodetection case */
+ if (data & HST_STS_DEVERR) {
+ if (size != HST_CNTL2_QUICK)
+ dev_err(&a->dev, "Device error!\n");
+ status = -ENXIO;
+ }
+ /* bus collision */
+ if (data & HST_STS_BUSERR) {
+ dev_err(&a->dev, "Bus collision!\n");
+ /* Issue timeout, hoping it helps */
+ outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1);
+ }
+
+ if (data & HST_STS_FAIL) {
+ dev_err(&a->dev, "Cleaning fail after KILL!\n");
+ outb_p(0x0, SMB_HST_CNTL2);
+ }
+
+ return status;
+}
+
+static int ali1563_block_start(struct i2c_adapter *a)
+{
+ u32 data;
+ int timeout;
+ int status = -EIO;
+
+ dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
+ "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+ inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+ inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+ inb_p(SMB_HST_DAT1));
+
+ data = inb_p(SMB_HST_STS);
+ if (data & HST_STS_BAD) {
+ dev_warn(&a->dev, "ali1563: Trying to reset busy device\n");
+ outb_p(data | HST_STS_BAD, SMB_HST_STS);
+ data = inb_p(SMB_HST_STS);
+ if (data & HST_STS_BAD)
+ return -EBUSY;
+ }
+
+ /* Clear byte-ready bit */
+ outb_p(data | HST_STS_DONE, SMB_HST_STS);
+
+ /* Start transaction and wait for byte-ready bit to be set */
+ outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
+
+ timeout = ALI1563_MAX_TIMEOUT;
+ do {
+ msleep(1);
+ } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+
+ dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
+ "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+ inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+ inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+ inb_p(SMB_HST_DAT1));
+
+ if (timeout && !(data & HST_STS_BAD))
+ return 0;
+
+ if (timeout == 0)
+ status = -ETIMEDOUT;
+
+ if (data & HST_STS_DEVERR)
+ status = -ENXIO;
+
+ dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+ timeout ? "" : "Timeout ",
+ data & HST_STS_FAIL ? "Transaction Failed " : "",
+ data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
+ data & HST_STS_DEVERR ? "Device Error " : "",
+ !(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
+ return status;
+}
+
+static int ali1563_block(struct i2c_adapter *a,
+ union i2c_smbus_data *data, u8 rw)
+{
+ int i, len;
+ int error = 0;
+
+ /* Do we need this? */
+ outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
+
+ if (rw == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ if (len < 1)
+ len = 1;
+ else if (len > 32)
+ len = 32;
+ outb_p(len, SMB_HST_DAT0);
+ outb_p(data->block[1], SMB_BLK_DAT);
+ } else
+ len = 32;
+
+ outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);
+
+ for (i = 0; i < len; i++) {
+ if (rw == I2C_SMBUS_WRITE) {
+ outb_p(data->block[i + 1], SMB_BLK_DAT);
+ error = ali1563_block_start(a);
+ if (error)
+ break;
+ } else {
+ error = ali1563_block_start(a);
+ if (error)
+ break;
+ if (i == 0) {
+ len = inb_p(SMB_HST_DAT0);
+ if (len < 1)
+ len = 1;
+ else if (len > 32)
+ len = 32;
+ }
+ data->block[i+1] = inb_p(SMB_BLK_DAT);
+ }
+ }
+ /* Do we need this? */
+ outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
+ return error;
+}
+
+static s32 ali1563_access(struct i2c_adapter *a, u16 addr,
+ unsigned short flags, char rw, u8 cmd,
+ int size, union i2c_smbus_data *data)
+{
+ int error = 0;
+ int timeout;
+ u32 reg;
+
+ for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
+ reg = inb_p(SMB_HST_STS);
+ if (!(reg & HST_STS_BUSY))
+ break;
+ }
+ if (!timeout)
+ dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg);
+ outb_p(0xff, SMB_HST_STS);
+
+ /* Map the size to what the chip understands */
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ size = HST_CNTL2_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ size = HST_CNTL2_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ size = HST_CNTL2_BYTE_DATA;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ size = HST_CNTL2_WORD_DATA;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ size = HST_CNTL2_BLOCK;
+ break;
+ default:
+ dev_warn(&a->dev, "Unsupported transaction %d\n", size);
+ error = -EOPNOTSUPP;
+ goto Done;
+ }
+
+ outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
+ outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) |
+ (size << 3), SMB_HST_CNTL2);
+
+ /* Write the command register */
+
+ switch (size) {
+ case HST_CNTL2_BYTE:
+ if (rw == I2C_SMBUS_WRITE)
+ /* Beware it uses DAT0 register and not CMD! */
+ outb_p(cmd, SMB_HST_DAT0);
+ break;
+ case HST_CNTL2_BYTE_DATA:
+ outb_p(cmd, SMB_HST_CMD);
+ if (rw == I2C_SMBUS_WRITE)
+ outb_p(data->byte, SMB_HST_DAT0);
+ break;
+ case HST_CNTL2_WORD_DATA:
+ outb_p(cmd, SMB_HST_CMD);
+ if (rw == I2C_SMBUS_WRITE) {
+ outb_p(data->word & 0xff, SMB_HST_DAT0);
+ outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
+ }
+ break;
+ case HST_CNTL2_BLOCK:
+ outb_p(cmd, SMB_HST_CMD);
+ error = ali1563_block(a, data, rw);
+ goto Done;
+ }
+
+ error = ali1563_transaction(a, size);
+ if (error)
+ goto Done;
+
+ if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
+ goto Done;
+
+ switch (size) {
+ case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */
+ data->byte = inb_p(SMB_HST_DAT0);
+ break;
+ case HST_CNTL2_BYTE_DATA:
+ data->byte = inb_p(SMB_HST_DAT0);
+ break;
+ case HST_CNTL2_WORD_DATA:
+ data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
+ break;
+ }
+Done:
+ return error;
+}
+
+static u32 ali1563_func(struct i2c_adapter *a)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+
+static int ali1563_setup(struct pci_dev *dev)
+{
+ u16 ctrl;
+
+ pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
+
+ /* SMB I/O Base in high 12 bits and must be aligned with the
+ * size of the I/O space. */
+ ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
+ if (!ali1563_smba) {
+ dev_warn(&dev->dev, "ali1563_smba Uninitialized\n");
+ goto Err;
+ }
+
+ /* Check if device is enabled */
+ if (!(ctrl & ALI1563_SMB_HOSTEN)) {
+ dev_warn(&dev->dev, "Host Controller not enabled\n");
+ goto Err;
+ }
+ if (!(ctrl & ALI1563_SMB_IOEN)) {
+ dev_warn(&dev->dev, "I/O space not enabled, trying manually\n");
+ pci_write_config_word(dev, ALI1563_SMBBA,
+ ctrl | ALI1563_SMB_IOEN);
+ pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
+ if (!(ctrl & ALI1563_SMB_IOEN)) {
+ dev_err(&dev->dev,
+ "I/O space still not enabled, giving up\n");
+ goto Err;
+ }
+ }
+
+ if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+ ali1563_pci_driver.name))
+ goto Err;
+
+ if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+ ali1563_pci_driver.name)) {
+ dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
+ ali1563_smba);
+ goto Err;
+ }
+ dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba);
+
+ return 0;
+Err:
+ return -ENODEV;
+}
+
+static void ali1563_shutdown(struct pci_dev *dev)
+{
+ release_region(ali1563_smba, ALI1563_SMB_IOSIZE);
+}
+
+static const struct i2c_algorithm ali1563_algorithm = {
+ .smbus_xfer = ali1563_access,
+ .functionality = ali1563_func,
+};
+
+static struct i2c_adapter ali1563_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .algo = &ali1563_algorithm,
+};
+
+static int ali1563_probe(struct pci_dev *dev,
+ const struct pci_device_id *id_table)
+{
+ int error;
+
+ error = ali1563_setup(dev);
+ if (error)
+ goto exit;
+ ali1563_adapter.dev.parent = &dev->dev;
+ snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name),
+ "SMBus ALi 1563 Adapter @ %04x", ali1563_smba);
+ error = i2c_add_adapter(&ali1563_adapter);
+ if (error)
+ goto exit_shutdown;
+ return 0;
+
+exit_shutdown:
+ ali1563_shutdown(dev);
+exit:
+ dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error);
+ return error;
+}
+
+static void ali1563_remove(struct pci_dev *dev)
+{
+ i2c_del_adapter(&ali1563_adapter);
+ ali1563_shutdown(dev);
+}
+
+static const struct pci_device_id ali1563_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
+ {},
+};
+
+MODULE_DEVICE_TABLE(pci, ali1563_id_table);
+
+static struct pci_driver ali1563_pci_driver = {
+ .name = "ali1563_smbus",
+ .id_table = ali1563_id_table,
+ .probe = ali1563_probe,
+ .remove = ali1563_remove,
+};
+
+module_pci_driver(ali1563_pci_driver);
+
+MODULE_LICENSE("GPL");