diff options
Diffstat (limited to 'kernel/drivers/hwmon/w83627hf.c')
| -rw-r--r-- | kernel/drivers/hwmon/w83627hf.c | 2008 |
1 files changed, 2008 insertions, 0 deletions
diff --git a/kernel/drivers/hwmon/w83627hf.c b/kernel/drivers/hwmon/w83627hf.c new file mode 100644 index 000000000..721295b9a --- /dev/null +++ b/kernel/drivers/hwmon/w83627hf.c @@ -0,0 +1,2008 @@ +/* + * w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>, + * Philip Edelbrock <phil@netroedge.com>, + * and Mark Studebaker <mdsxyz123@yahoo.com> + * Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org> + * Copyright (c) 2007 - 1012 Jean Delvare <jdelvare@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Supports following chips: + * + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC) + * w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) + * w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC) + * w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) + * w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) + * + * For other winbond chips, and for i2c support in the above chips, + * use w83781d.c. + * + * Note: automatic ("cruise") fan control for 697, 637 & 627thf not + * supported yet. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon-vid.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/ioport.h> +#include <linux/acpi.h> +#include <linux/io.h> +#include "lm75.h" + +static struct platform_device *pdev; + +#define DRVNAME "w83627hf" +enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf }; + +struct w83627hf_sio_data { + enum chips type; + int sioaddr; +}; + +static u8 force_i2c = 0x1f; +module_param(force_i2c, byte, 0); +MODULE_PARM_DESC(force_i2c, + "Initialize the i2c address of the sensors"); + +static bool init = 1; +module_param(init, bool, 0); +MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); + +static unsigned short force_id; +module_param(force_id, ushort, 0); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); + +/* modified from kernel/include/traps.c */ +#define DEV 0x07 /* Register: Logical device select */ + +/* logical device numbers for superio_select (below) */ +#define W83627HF_LD_FDC 0x00 +#define W83627HF_LD_PRT 0x01 +#define W83627HF_LD_UART1 0x02 +#define W83627HF_LD_UART2 0x03 +#define W83627HF_LD_KBC 0x05 +#define W83627HF_LD_CIR 0x06 /* w83627hf only */ +#define W83627HF_LD_GAME 0x07 +#define W83627HF_LD_MIDI 0x07 +#define W83627HF_LD_GPIO1 0x07 +#define W83627HF_LD_GPIO5 0x07 /* w83627thf only */ +#define W83627HF_LD_GPIO2 0x08 +#define W83627HF_LD_GPIO3 0x09 +#define W83627HF_LD_GPIO4 0x09 /* w83627thf only */ +#define W83627HF_LD_ACPI 0x0a +#define W83627HF_LD_HWM 0x0b + +#define DEVID 0x20 /* Register: Device ID */ + +#define W83627THF_GPIO5_EN 0x30 /* w83627thf only */ +#define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */ +#define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */ + +#define W83687THF_VID_EN 0x29 /* w83687thf only */ +#define W83687THF_VID_CFG 0xF0 /* w83687thf only */ +#define W83687THF_VID_DATA 0xF1 /* w83687thf only */ + +static inline void +superio_outb(struct w83627hf_sio_data *sio, int reg, int val) +{ + outb(reg, sio->sioaddr); + outb(val, sio->sioaddr + 1); +} + +static inline int +superio_inb(struct w83627hf_sio_data *sio, int reg) +{ + outb(reg, sio->sioaddr); + return inb(sio->sioaddr + 1); +} + +static inline void +superio_select(struct w83627hf_sio_data *sio, int ld) +{ + outb(DEV, sio->sioaddr); + outb(ld, sio->sioaddr + 1); +} + +static inline void +superio_enter(struct w83627hf_sio_data *sio) +{ + outb(0x87, sio->sioaddr); + outb(0x87, sio->sioaddr); +} + +static inline void +superio_exit(struct w83627hf_sio_data *sio) +{ + outb(0xAA, sio->sioaddr); +} + +#define W627_DEVID 0x52 +#define W627THF_DEVID 0x82 +#define W697_DEVID 0x60 +#define W637_DEVID 0x70 +#define W687THF_DEVID 0x85 +#define WINB_ACT_REG 0x30 +#define WINB_BASE_REG 0x60 +/* Constants specified below */ + +/* Alignment of the base address */ +#define WINB_ALIGNMENT ~7 + +/* Offset & size of I/O region we are interested in */ +#define WINB_REGION_OFFSET 5 +#define WINB_REGION_SIZE 2 + +/* Where are the sensors address/data registers relative to the region offset */ +#define W83781D_ADDR_REG_OFFSET 0 +#define W83781D_DATA_REG_OFFSET 1 + +/* The W83781D registers */ +/* The W83782D registers for nr=7,8 are in bank 5 */ +#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ + (0x554 + (((nr) - 7) * 2))) +#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ + (0x555 + (((nr) - 7) * 2))) +#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ + (0x550 + (nr) - 7)) + +/* nr:0-2 for fans:1-3 */ +#define W83627HF_REG_FAN_MIN(nr) (0x3b + (nr)) +#define W83627HF_REG_FAN(nr) (0x28 + (nr)) + +#define W83627HF_REG_TEMP2_CONFIG 0x152 +#define W83627HF_REG_TEMP3_CONFIG 0x252 +/* these are zero-based, unlike config constants above */ +static const u16 w83627hf_reg_temp[] = { 0x27, 0x150, 0x250 }; +static const u16 w83627hf_reg_temp_hyst[] = { 0x3A, 0x153, 0x253 }; +static const u16 w83627hf_reg_temp_over[] = { 0x39, 0x155, 0x255 }; + +#define W83781D_REG_BANK 0x4E + +#define W83781D_REG_CONFIG 0x40 +#define W83781D_REG_ALARM1 0x459 +#define W83781D_REG_ALARM2 0x45A +#define W83781D_REG_ALARM3 0x45B + +#define W83781D_REG_BEEP_CONFIG 0x4D +#define W83781D_REG_BEEP_INTS1 0x56 +#define W83781D_REG_BEEP_INTS2 0x57 +#define W83781D_REG_BEEP_INTS3 0x453 + +#define W83781D_REG_VID_FANDIV 0x47 + +#define W83781D_REG_CHIPID 0x49 +#define W83781D_REG_WCHIPID 0x58 +#define W83781D_REG_CHIPMAN 0x4F +#define W83781D_REG_PIN 0x4B + +#define W83781D_REG_VBAT 0x5D + +#define W83627HF_REG_PWM1 0x5A +#define W83627HF_REG_PWM2 0x5B + +static const u8 W83627THF_REG_PWM_ENABLE[] = { + 0x04, /* FAN 1 mode */ + 0x04, /* FAN 2 mode */ + 0x12, /* FAN AUX mode */ +}; +static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 }; + +#define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */ +#define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */ +#define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */ + +#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */ + +static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 }; +static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2, + W83627THF_REG_PWM3 }; +#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \ + regpwm_627hf[nr] : regpwm[nr]) + +#define W83627HF_REG_PWM_FREQ 0x5C /* Only for the 627HF */ + +#define W83637HF_REG_PWM_FREQ1 0x00 /* 697HF/687THF too */ +#define W83637HF_REG_PWM_FREQ2 0x02 /* 697HF/687THF too */ +#define W83637HF_REG_PWM_FREQ3 0x10 /* 687THF too */ + +static const u8 W83637HF_REG_PWM_FREQ[] = { W83637HF_REG_PWM_FREQ1, + W83637HF_REG_PWM_FREQ2, + W83637HF_REG_PWM_FREQ3 }; + +#define W83627HF_BASE_PWM_FREQ 46870 + +#define W83781D_REG_I2C_ADDR 0x48 +#define W83781D_REG_I2C_SUBADDR 0x4A + +/* Sensor selection */ +#define W83781D_REG_SCFG1 0x5D +static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 }; +#define W83781D_REG_SCFG2 0x59 +static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 }; +#define W83781D_DEFAULT_BETA 3435 + +/* + * Conversions. Limit checking is only done on the TO_REG + * variants. Note that you should be a bit careful with which arguments + * these macros are called: arguments may be evaluated more than once. + * Fixing this is just not worth it. + */ +#define IN_TO_REG(val) (clamp_val((((val) + 8) / 16), 0, 255)) +#define IN_FROM_REG(val) ((val) * 16) + +static inline u8 FAN_TO_REG(long rpm, int div) +{ + if (rpm == 0) + return 255; + rpm = clamp_val(rpm, 1, 1000000); + return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254); +} + +#define TEMP_MIN (-128000) +#define TEMP_MAX ( 127000) + +/* + * TEMP: 0.001C/bit (-128C to +127C) + * REG: 1C/bit, two's complement + */ +static u8 TEMP_TO_REG(long temp) +{ + int ntemp = clamp_val(temp, TEMP_MIN, TEMP_MAX); + ntemp += (ntemp < 0 ? -500 : 500); + return (u8)(ntemp / 1000); +} + +static int TEMP_FROM_REG(u8 reg) +{ + return (s8)reg * 1000; +} + +#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) + +#define PWM_TO_REG(val) (clamp_val((val), 0, 255)) + +static inline unsigned long pwm_freq_from_reg_627hf(u8 reg) +{ + unsigned long freq; + freq = W83627HF_BASE_PWM_FREQ >> reg; + return freq; +} +static inline u8 pwm_freq_to_reg_627hf(unsigned long val) +{ + u8 i; + /* + * Only 5 dividers (1 2 4 8 16) + * Search for the nearest available frequency + */ + for (i = 0; i < 4; i++) { + if (val > (((W83627HF_BASE_PWM_FREQ >> i) + + (W83627HF_BASE_PWM_FREQ >> (i+1))) / 2)) + break; + } + return i; +} + +static inline unsigned long pwm_freq_from_reg(u8 reg) +{ + /* Clock bit 8 -> 180 kHz or 24 MHz */ + unsigned long clock = (reg & 0x80) ? 180000UL : 24000000UL; + + reg &= 0x7f; + /* This should not happen but anyway... */ + if (reg == 0) + reg++; + return clock / (reg << 8); +} +static inline u8 pwm_freq_to_reg(unsigned long val) +{ + /* Minimum divider value is 0x01 and maximum is 0x7F */ + if (val >= 93750) /* The highest we can do */ + return 0x01; + if (val >= 720) /* Use 24 MHz clock */ + return 24000000UL / (val << 8); + if (val < 6) /* The lowest we can do */ + return 0xFF; + else /* Use 180 kHz clock */ + return 0x80 | (180000UL / (val << 8)); +} + +#define BEEP_MASK_FROM_REG(val) ((val) & 0xff7fff) +#define BEEP_MASK_TO_REG(val) ((val) & 0xff7fff) + +#define DIV_FROM_REG(val) (1 << (val)) + +static inline u8 DIV_TO_REG(long val) +{ + int i; + val = clamp_val(val, 1, 128) >> 1; + for (i = 0; i < 7; i++) { + if (val == 0) + break; + val >>= 1; + } + return (u8)i; +} + +/* + * For each registered chip, we need to keep some data in memory. + * The structure is dynamically allocated. + */ +struct w83627hf_data { + unsigned short addr; + const char *name; + struct device *hwmon_dev; + struct mutex lock; + enum chips type; + + struct mutex update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 in[9]; /* Register value */ + u8 in_max[9]; /* Register value */ + u8 in_min[9]; /* Register value */ + u8 fan[3]; /* Register value */ + u8 fan_min[3]; /* Register value */ + u16 temp[3]; /* Register value */ + u16 temp_max[3]; /* Register value */ + u16 temp_max_hyst[3]; /* Register value */ + u8 fan_div[3]; /* Register encoding, shifted right */ + u8 vid; /* Register encoding, combined */ + u32 alarms; /* Register encoding, combined */ + u32 beep_mask; /* Register encoding, combined */ + u8 pwm[3]; /* Register value */ + u8 pwm_enable[3]; /* 1 = manual + * 2 = thermal cruise (also called SmartFan I) + * 3 = fan speed cruise + */ + u8 pwm_freq[3]; /* Register value */ + u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode; + * 4 = thermistor + */ + u8 vrm; + u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */ + +#ifdef CONFIG_PM + /* Remember extra register values over suspend/resume */ + u8 scfg1; + u8 scfg2; +#endif +}; + + +static int w83627hf_probe(struct platform_device *pdev); +static int w83627hf_remove(struct platform_device *pdev); + +static int w83627hf_read_value(struct w83627hf_data *data, u16 reg); +static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value); +static void w83627hf_update_fan_div(struct w83627hf_data *data); +static struct w83627hf_data *w83627hf_update_device(struct device *dev); +static void w83627hf_init_device(struct platform_device *pdev); + +#ifdef CONFIG_PM +static int w83627hf_suspend(struct device *dev) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + + mutex_lock(&data->update_lock); + data->scfg1 = w83627hf_read_value(data, W83781D_REG_SCFG1); + data->scfg2 = w83627hf_read_value(data, W83781D_REG_SCFG2); + mutex_unlock(&data->update_lock); + + return 0; +} + +static int w83627hf_resume(struct device *dev) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + int i, num_temps = (data->type == w83697hf) ? 2 : 3; + + /* Restore limits */ + mutex_lock(&data->update_lock); + for (i = 0; i <= 8; i++) { + /* skip missing sensors */ + if (((data->type == w83697hf) && (i == 1)) || + ((data->type != w83627hf && data->type != w83697hf) + && (i == 5 || i == 6))) + continue; + w83627hf_write_value(data, W83781D_REG_IN_MAX(i), + data->in_max[i]); + w83627hf_write_value(data, W83781D_REG_IN_MIN(i), + data->in_min[i]); + } + for (i = 0; i <= 2; i++) + w83627hf_write_value(data, W83627HF_REG_FAN_MIN(i), + data->fan_min[i]); + for (i = 0; i < num_temps; i++) { + w83627hf_write_value(data, w83627hf_reg_temp_over[i], + data->temp_max[i]); + w83627hf_write_value(data, w83627hf_reg_temp_hyst[i], + data->temp_max_hyst[i]); + } + + /* Fixup BIOS bugs */ + if (data->type == w83627thf || data->type == w83637hf || + data->type == w83687thf) + w83627hf_write_value(data, W83627THF_REG_VRM_OVT_CFG, + data->vrm_ovt); + w83627hf_write_value(data, W83781D_REG_SCFG1, data->scfg1); + w83627hf_write_value(data, W83781D_REG_SCFG2, data->scfg2); + + /* Force re-reading all values */ + data->valid = 0; + mutex_unlock(&data->update_lock); + + return 0; +} + +static const struct dev_pm_ops w83627hf_dev_pm_ops = { + .suspend = w83627hf_suspend, + .resume = w83627hf_resume, +}; + +#define W83627HF_DEV_PM_OPS (&w83627hf_dev_pm_ops) +#else +#define W83627HF_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + +static struct platform_driver w83627hf_driver = { + .driver = { + .name = DRVNAME, + .pm = W83627HF_DEV_PM_OPS, + }, + .probe = w83627hf_probe, + .remove = w83627hf_remove, +}; + +static ssize_t +show_in_input(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr])); +} +static ssize_t +show_in_min(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr])); +} +static ssize_t +show_in_max(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr])); +} +static ssize_t +store_in_min(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->in_min[nr] = IN_TO_REG(val); + w83627hf_write_value(data, W83781D_REG_IN_MIN(nr), data->in_min[nr]); + mutex_unlock(&data->update_lock); + return count; +} +static ssize_t +store_in_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->in_max[nr] = IN_TO_REG(val); + w83627hf_write_value(data, W83781D_REG_IN_MAX(nr), data->in_max[nr]); + mutex_unlock(&data->update_lock); + return count; +} +#define sysfs_vin_decl(offset) \ +static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in_input, NULL, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO|S_IWUSR, \ + show_in_min, store_in_min, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO|S_IWUSR, \ + show_in_max, store_in_max, offset); + +sysfs_vin_decl(1); +sysfs_vin_decl(2); +sysfs_vin_decl(3); +sysfs_vin_decl(4); +sysfs_vin_decl(5); +sysfs_vin_decl(6); +sysfs_vin_decl(7); +sysfs_vin_decl(8); + +/* use a different set of functions for in0 */ +static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg) +{ + long in0; + + if ((data->vrm_ovt & 0x01) && + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) + + /* use VRM9 calculation */ + in0 = (long)((reg * 488 + 70000 + 50) / 100); + else + /* use VRM8 (standard) calculation */ + in0 = (long)IN_FROM_REG(reg); + + return sprintf(buf,"%ld\n", in0); +} + +static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return show_in_0(data, buf, data->in[0]); +} + +static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return show_in_0(data, buf, data->in_min[0]); +} + +static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return show_in_0(data, buf, data->in_max[0]); +} + +static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + if ((data->vrm_ovt & 0x01) && + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) + + /* use VRM9 calculation */ + data->in_min[0] = + clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255); + else + /* use VRM8 (standard) calculation */ + data->in_min[0] = IN_TO_REG(val); + + w83627hf_write_value(data, W83781D_REG_IN_MIN(0), data->in_min[0]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + if ((data->vrm_ovt & 0x01) && + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) + + /* use VRM9 calculation */ + data->in_max[0] = + clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255); + else + /* use VRM8 (standard) calculation */ + data->in_max[0] = IN_TO_REG(val); + + w83627hf_write_value(data, W83781D_REG_IN_MAX(0), data->in_max[0]); + mutex_unlock(&data->update_lock); + return count; +} + +static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL); +static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, + show_regs_in_min0, store_regs_in_min0); +static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, + show_regs_in_max0, store_regs_in_max0); + +static ssize_t +show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan[nr], + (long)DIV_FROM_REG(data->fan_div[nr]))); +} +static ssize_t +show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan_min[nr], + (long)DIV_FROM_REG(data->fan_div[nr]))); +} +static ssize_t +store_fan_min(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), + data->fan_min[nr]); + + mutex_unlock(&data->update_lock); + return count; +} +#define sysfs_fan_decl(offset) \ +static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan_input, NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_min, store_fan_min, offset - 1); + +sysfs_fan_decl(1); +sysfs_fan_decl(2); +sysfs_fan_decl(3); + +static ssize_t +show_temp(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + + u16 tmp = data->temp[nr]; + return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp) + : (long) TEMP_FROM_REG(tmp)); +} + +static ssize_t +show_temp_max(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + + u16 tmp = data->temp_max[nr]; + return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp) + : (long) TEMP_FROM_REG(tmp)); +} + +static ssize_t +show_temp_max_hyst(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + + u16 tmp = data->temp_max_hyst[nr]; + return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp) + : (long) TEMP_FROM_REG(tmp)); +} + +static ssize_t +store_temp_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + u16 tmp; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val); + mutex_lock(&data->update_lock); + data->temp_max[nr] = tmp; + w83627hf_write_value(data, w83627hf_reg_temp_over[nr], tmp); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_temp_max_hyst(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + u16 tmp; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val); + mutex_lock(&data->update_lock); + data->temp_max_hyst[nr] = tmp; + w83627hf_write_value(data, w83627hf_reg_temp_hyst[nr], tmp); + mutex_unlock(&data->update_lock); + return count; +} + +#define sysfs_temp_decl(offset) \ +static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_temp, NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR, \ + show_temp_max, store_temp_max, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR, \ + show_temp_max_hyst, store_temp_max_hyst, offset - 1); + +sysfs_temp_decl(1); +sysfs_temp_decl(2); +sysfs_temp_decl(3); + +static ssize_t +show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); + +static ssize_t +show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%ld\n", (long) data->vrm); +} +static ssize_t +store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + if (val > 255) + return -EINVAL; + data->vrm = val; + + return count; +} +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); + +static ssize_t +show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->alarms); +} +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); + +static ssize_t +show_alarm(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + int bitnr = to_sensor_dev_attr(attr)->index; + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); +} +static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17); +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11); +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13); + +static ssize_t +show_beep_mask(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", + (long)BEEP_MASK_FROM_REG(data->beep_mask)); +} + +static ssize_t +store_beep_mask(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + /* preserve beep enable */ + data->beep_mask = (data->beep_mask & 0x8000) + | BEEP_MASK_TO_REG(val); + w83627hf_write_value(data, W83781D_REG_BEEP_INTS1, + data->beep_mask & 0xff); + w83627hf_write_value(data, W83781D_REG_BEEP_INTS3, + ((data->beep_mask) >> 16) & 0xff); + w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, + (data->beep_mask >> 8) & 0xff); + + mutex_unlock(&data->update_lock); + return count; +} + +static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR, + show_beep_mask, store_beep_mask); + +static ssize_t +show_beep(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + int bitnr = to_sensor_dev_attr(attr)->index; + return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1); +} + +static ssize_t +store_beep(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + int bitnr = to_sensor_dev_attr(attr)->index; + u8 reg; + unsigned long bit; + int err; + + err = kstrtoul(buf, 10, &bit); + if (err) + return err; + + if (bit & ~1) + return -EINVAL; + + mutex_lock(&data->update_lock); + if (bit) + data->beep_mask |= (1 << bitnr); + else + data->beep_mask &= ~(1 << bitnr); + + if (bitnr < 8) { + reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS1); + if (bit) + reg |= (1 << bitnr); + else + reg &= ~(1 << bitnr); + w83627hf_write_value(data, W83781D_REG_BEEP_INTS1, reg); + } else if (bitnr < 16) { + reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2); + if (bit) + reg |= (1 << (bitnr - 8)); + else + reg &= ~(1 << (bitnr - 8)); + w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, reg); + } else { + reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS3); + if (bit) + reg |= (1 << (bitnr - 16)); + else + reg &= ~(1 << (bitnr - 16)); + w83627hf_write_value(data, W83781D_REG_BEEP_INTS3, reg); + } + mutex_unlock(&data->update_lock); + + return count; +} + +static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 0); +static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 1); +static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 2); +static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 3); +static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 8); +static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 9); +static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 10); +static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 16); +static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 17); +static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 6); +static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 7); +static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 11); +static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 4); +static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 5); +static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO | S_IWUSR, + show_beep, store_beep, 13); +static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR, + show_beep, store_beep, 15); + +static ssize_t +show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", + (long) DIV_FROM_REG(data->fan_div[nr])); +} +/* + * Note: we save and restore the fan minimum here, because its value is + * determined in part by the fan divisor. This follows the principle of + * least surprise; the user doesn't expect the fan minimum to change just + * because the divisor changed. + */ +static ssize_t +store_fan_div(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long min; + u8 reg; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + /* Save fan_min */ + min = FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])); + + data->fan_div[nr] = DIV_TO_REG(val); + + reg = (w83627hf_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV) + & (nr==0 ? 0xcf : 0x3f)) + | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6)); + w83627hf_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg); + + reg = (w83627hf_read_value(data, W83781D_REG_VBAT) + & ~(1 << (5 + nr))) + | ((data->fan_div[nr] & 0x04) << (3 + nr)); + w83627hf_write_value(data, W83781D_REG_VBAT, reg); + + /* Restore fan_min */ + data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), data->fan_min[nr]); + + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO|S_IWUSR, + show_fan_div, store_fan_div, 0); +static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO|S_IWUSR, + show_fan_div, store_fan_div, 1); +static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO|S_IWUSR, + show_fan_div, store_fan_div, 2); + +static ssize_t +show_pwm(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->pwm[nr]); +} + +static ssize_t +store_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + if (data->type == w83627thf) { + /* bits 0-3 are reserved in 627THF */ + data->pwm[nr] = PWM_TO_REG(val) & 0xf0; + w83627hf_write_value(data, + W836X7HF_REG_PWM(data->type, nr), + data->pwm[nr] | + (w83627hf_read_value(data, + W836X7HF_REG_PWM(data->type, nr)) & 0x0f)); + } else { + data->pwm[nr] = PWM_TO_REG(val); + w83627hf_write_value(data, + W836X7HF_REG_PWM(data->type, nr), + data->pwm[nr]); + } + + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2); + +static ssize_t +show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_enable[nr]); +} + +static ssize_t +store_pwm_enable(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + u8 reg; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + if (!val || val > 3) /* modes 1, 2 and 3 are supported */ + return -EINVAL; + mutex_lock(&data->update_lock); + data->pwm_enable[nr] = val; + reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]); + reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]); + reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr]; + w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 2); + +static ssize_t +show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + if (data->type == w83627hf) + return sprintf(buf, "%ld\n", + pwm_freq_from_reg_627hf(data->pwm_freq[nr])); + else + return sprintf(buf, "%ld\n", + pwm_freq_from_reg(data->pwm_freq[nr])); +} + +static ssize_t +store_pwm_freq(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + static const u8 mask[]={0xF8, 0x8F}; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + if (data->type == w83627hf) { + data->pwm_freq[nr] = pwm_freq_to_reg_627hf(val); + w83627hf_write_value(data, W83627HF_REG_PWM_FREQ, + (data->pwm_freq[nr] << (nr*4)) | + (w83627hf_read_value(data, + W83627HF_REG_PWM_FREQ) & mask[nr])); + } else { + data->pwm_freq[nr] = pwm_freq_to_reg(val); + w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr], + data->pwm_freq[nr]); + } + + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO|S_IWUSR, + show_pwm_freq, store_pwm_freq, 0); +static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO|S_IWUSR, + show_pwm_freq, store_pwm_freq, 1); +static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO|S_IWUSR, + show_pwm_freq, store_pwm_freq, 2); + +static ssize_t +show_temp_type(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->sens[nr]); +} + +static ssize_t +store_temp_type(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val; + u32 tmp; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + + switch (val) { + case 1: /* PII/Celeron diode */ + tmp = w83627hf_read_value(data, W83781D_REG_SCFG1); + w83627hf_write_value(data, W83781D_REG_SCFG1, + tmp | BIT_SCFG1[nr]); + tmp = w83627hf_read_value(data, W83781D_REG_SCFG2); + w83627hf_write_value(data, W83781D_REG_SCFG2, + tmp | BIT_SCFG2[nr]); + data->sens[nr] = val; + break; + case 2: /* 3904 */ + tmp = w83627hf_read_value(data, W83781D_REG_SCFG1); + w83627hf_write_value(data, W83781D_REG_SCFG1, + tmp | BIT_SCFG1[nr]); + tmp = w83627hf_read_value(data, W83781D_REG_SCFG2); + w83627hf_write_value(data, W83781D_REG_SCFG2, + tmp & ~BIT_SCFG2[nr]); + data->sens[nr] = val; + break; + case W83781D_DEFAULT_BETA: + dev_warn(dev, "Sensor type %d is deprecated, please use 4 " + "instead\n", W83781D_DEFAULT_BETA); + /* fall through */ + case 4: /* thermistor */ + tmp = w83627hf_read_value(data, W83781D_REG_SCFG1); + w83627hf_write_value(data, W83781D_REG_SCFG1, + tmp & ~BIT_SCFG1[nr]); + data->sens[nr] = val; + break; + default: + dev_err(dev, + "Invalid sensor type %ld; must be 1, 2, or 4\n", + (long) val); + break; + } + + mutex_unlock(&data->update_lock); + return count; +} + +#define sysfs_temp_type(offset) \ +static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ + show_temp_type, store_temp_type, offset - 1); + +sysfs_temp_type(1); +sysfs_temp_type(2); +sysfs_temp_type(3); + +static ssize_t +show_name(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", data->name); +} +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static int __init w83627hf_find(int sioaddr, unsigned short *addr, + struct w83627hf_sio_data *sio_data) +{ + int err = -ENODEV; + u16 val; + + static __initconst char *const names[] = { + "W83627HF", + "W83627THF", + "W83697HF", + "W83637HF", + "W83687THF", + }; + + sio_data->sioaddr = sioaddr; + superio_enter(sio_data); + val = force_id ? force_id : superio_inb(sio_data, DEVID); + switch (val) { + case W627_DEVID: + sio_data->type = w83627hf; + break; + case W627THF_DEVID: + sio_data->type = w83627thf; + break; + case W697_DEVID: + sio_data->type = w83697hf; + break; + case W637_DEVID: + sio_data->type = w83637hf; + break; + case W687THF_DEVID: + sio_data->type = w83687thf; + break; + case 0xff: /* No device at all */ + goto exit; + default: + pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%02x)\n", val); + goto exit; + } + + superio_select(sio_data, W83627HF_LD_HWM); + val = (superio_inb(sio_data, WINB_BASE_REG) << 8) | + superio_inb(sio_data, WINB_BASE_REG + 1); + *addr = val & WINB_ALIGNMENT; + if (*addr == 0) { + pr_warn("Base address not set, skipping\n"); + goto exit; + } + + val = superio_inb(sio_data, WINB_ACT_REG); + if (!(val & 0x01)) { + pr_warn("Enabling HWM logical device\n"); + superio_outb(sio_data, WINB_ACT_REG, val | 0x01); + } + + err = 0; + pr_info(DRVNAME ": Found %s chip at %#x\n", + names[sio_data->type], *addr); + + exit: + superio_exit(sio_data); + return err; +} + +#define VIN_UNIT_ATTRS(_X_) \ + &sensor_dev_attr_in##_X_##_input.dev_attr.attr, \ + &sensor_dev_attr_in##_X_##_min.dev_attr.attr, \ + &sensor_dev_attr_in##_X_##_max.dev_attr.attr, \ + &sensor_dev_attr_in##_X_##_alarm.dev_attr.attr, \ + &sensor_dev_attr_in##_X_##_beep.dev_attr.attr + +#define FAN_UNIT_ATTRS(_X_) \ + &sensor_dev_attr_fan##_X_##_input.dev_attr.attr, \ + &sensor_dev_attr_fan##_X_##_min.dev_attr.attr, \ + &sensor_dev_attr_fan##_X_##_div.dev_attr.attr, \ + &sensor_dev_attr_fan##_X_##_alarm.dev_attr.attr, \ + &sensor_dev_attr_fan##_X_##_beep.dev_attr.attr + +#define TEMP_UNIT_ATTRS(_X_) \ + &sensor_dev_attr_temp##_X_##_input.dev_attr.attr, \ + &sensor_dev_attr_temp##_X_##_max.dev_attr.attr, \ + &sensor_dev_attr_temp##_X_##_max_hyst.dev_attr.attr, \ + &sensor_dev_attr_temp##_X_##_type.dev_attr.attr, \ + &sensor_dev_attr_temp##_X_##_alarm.dev_attr.attr, \ + &sensor_dev_attr_temp##_X_##_beep.dev_attr.attr + +static struct attribute *w83627hf_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in0_max.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in0_beep.dev_attr.attr, + VIN_UNIT_ATTRS(2), + VIN_UNIT_ATTRS(3), + VIN_UNIT_ATTRS(4), + VIN_UNIT_ATTRS(7), + VIN_UNIT_ATTRS(8), + + FAN_UNIT_ATTRS(1), + FAN_UNIT_ATTRS(2), + + TEMP_UNIT_ATTRS(1), + TEMP_UNIT_ATTRS(2), + + &dev_attr_alarms.attr, + &sensor_dev_attr_beep_enable.dev_attr.attr, + &dev_attr_beep_mask.attr, + + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &dev_attr_name.attr, + NULL +}; + +static const struct attribute_group w83627hf_group = { + .attrs = w83627hf_attributes, +}; + +static struct attribute *w83627hf_attributes_opt[] = { + VIN_UNIT_ATTRS(1), + VIN_UNIT_ATTRS(5), + VIN_UNIT_ATTRS(6), + + FAN_UNIT_ATTRS(3), + TEMP_UNIT_ATTRS(3), + &sensor_dev_attr_pwm3.dev_attr.attr, + + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + + NULL +}; + +static const struct attribute_group w83627hf_group_opt = { + .attrs = w83627hf_attributes_opt, +}; + +static int w83627hf_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct w83627hf_sio_data *sio_data = dev_get_platdata(dev); + struct w83627hf_data *data; + struct resource *res; + int err, i; + + static const char *names[] = { + "w83627hf", + "w83627thf", + "w83697hf", + "w83637hf", + "w83687thf", + }; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!devm_request_region(dev, res->start, WINB_REGION_SIZE, DRVNAME)) { + dev_err(dev, "Failed to request region 0x%lx-0x%lx\n", + (unsigned long)res->start, + (unsigned long)(res->start + WINB_REGION_SIZE - 1)); + return -EBUSY; + } + + data = devm_kzalloc(dev, sizeof(struct w83627hf_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->addr = res->start; + data->type = sio_data->type; + data->name = names[sio_data->type]; + mutex_init(&data->lock); + mutex_init(&data->update_lock); + platform_set_drvdata(pdev, data); + + /* Initialize the chip */ + w83627hf_init_device(pdev); + + /* A few vars need to be filled upon startup */ + for (i = 0; i <= 2; i++) + data->fan_min[i] = w83627hf_read_value( + data, W83627HF_REG_FAN_MIN(i)); + w83627hf_update_fan_div(data); + + /* Register common device attributes */ + err = sysfs_create_group(&dev->kobj, &w83627hf_group); + if (err) + return err; + + /* Register chip-specific device attributes */ + if (data->type == w83627hf || data->type == w83697hf) + if ((err = device_create_file(dev, + &sensor_dev_attr_in5_input.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in5_min.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in5_max.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in5_alarm.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in5_beep.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in6_input.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in6_min.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in6_max.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in6_alarm.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in6_beep.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm1_freq.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2_freq.dev_attr))) + goto error; + + if (data->type != w83697hf) + if ((err = device_create_file(dev, + &sensor_dev_attr_in1_input.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in1_min.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in1_max.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in1_alarm.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_in1_beep.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_fan3_input.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_fan3_min.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_fan3_div.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_fan3_alarm.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_fan3_beep.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_temp3_input.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_temp3_max.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_temp3_max_hyst.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_temp3_alarm.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_temp3_beep.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_temp3_type.dev_attr))) + goto error; + + if (data->type != w83697hf && data->vid != 0xff) { + /* Convert VID to voltage based on VRM */ + data->vrm = vid_which_vrm(); + + if ((err = device_create_file(dev, &dev_attr_cpu0_vid)) + || (err = device_create_file(dev, &dev_attr_vrm))) + goto error; + } + + if (data->type == w83627thf || data->type == w83637hf + || data->type == w83687thf) { + err = device_create_file(dev, &sensor_dev_attr_pwm3.dev_attr); + if (err) + goto error; + } + + if (data->type == w83637hf || data->type == w83687thf) + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm1_freq.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2_freq.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm3_freq.dev_attr))) + goto error; + + if (data->type != w83627hf) + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm1_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2_enable.dev_attr))) + goto error; + + if (data->type == w83627thf || data->type == w83637hf + || data->type == w83687thf) { + err = device_create_file(dev, + &sensor_dev_attr_pwm3_enable.dev_attr); + if (err) + goto error; + } + + data->hwmon_dev = hwmon_device_register(dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto error; + } + + return 0; + + error: + sysfs_remove_group(&dev->kobj, &w83627hf_group); + sysfs_remove_group(&dev->kobj, &w83627hf_group_opt); + return err; +} + +static int w83627hf_remove(struct platform_device *pdev) +{ + struct w83627hf_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + + sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group); + sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt); + + return 0; +} + + +/* Registers 0x50-0x5f are banked */ +static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg) +{ + if ((reg & 0x00f0) == 0x50) { + outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET); + outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET); + } +} + +/* Not strictly necessary, but play it safe for now */ +static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg) +{ + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET); + outb_p(0, data->addr + W83781D_DATA_REG_OFFSET); + } +} + +static int w83627hf_read_value(struct w83627hf_data *data, u16 reg) +{ + int res, word_sized; + + mutex_lock(&data->lock); + word_sized = (((reg & 0xff00) == 0x100) + || ((reg & 0xff00) == 0x200)) + && (((reg & 0x00ff) == 0x50) + || ((reg & 0x00ff) == 0x53) + || ((reg & 0x00ff) == 0x55)); + w83627hf_set_bank(data, reg); + outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET); + res = inb_p(data->addr + W83781D_DATA_REG_OFFSET); + if (word_sized) { + outb_p((reg & 0xff) + 1, + data->addr + W83781D_ADDR_REG_OFFSET); + res = + (res << 8) + inb_p(data->addr + + W83781D_DATA_REG_OFFSET); + } + w83627hf_reset_bank(data, reg); + mutex_unlock(&data->lock); + return res; +} + +static int w83627thf_read_gpio5(struct platform_device *pdev) +{ + struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev); + int res = 0xff, sel; + + superio_enter(sio_data); + superio_select(sio_data, W83627HF_LD_GPIO5); + + /* Make sure these GPIO pins are enabled */ + if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) { + dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n"); + goto exit; + } + + /* + * Make sure the pins are configured for input + * There must be at least five (VRM 9), and possibly 6 (VRM 10) + */ + sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f; + if ((sel & 0x1f) != 0x1f) { + dev_dbg(&pdev->dev, "GPIO5 not configured for VID " + "function\n"); + goto exit; + } + + dev_info(&pdev->dev, "Reading VID from GPIO5\n"); + res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel; + +exit: + superio_exit(sio_data); + return res; +} + +static int w83687thf_read_vid(struct platform_device *pdev) +{ + struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev); + int res = 0xff; + + superio_enter(sio_data); + superio_select(sio_data, W83627HF_LD_HWM); + + /* Make sure these GPIO pins are enabled */ + if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) { + dev_dbg(&pdev->dev, "VID disabled, no VID function\n"); + goto exit; + } + + /* Make sure the pins are configured for input */ + if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) { + dev_dbg(&pdev->dev, "VID configured as output, " + "no VID function\n"); + goto exit; + } + + res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f; + +exit: + superio_exit(sio_data); + return res; +} + +static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value) +{ + int word_sized; + + mutex_lock(&data->lock); + word_sized = (((reg & 0xff00) == 0x100) + || ((reg & 0xff00) == 0x200)) + && (((reg & 0x00ff) == 0x53) + || ((reg & 0x00ff) == 0x55)); + w83627hf_set_bank(data, reg); + outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET); + if (word_sized) { + outb_p(value >> 8, + data->addr + W83781D_DATA_REG_OFFSET); + outb_p((reg & 0xff) + 1, + data->addr + W83781D_ADDR_REG_OFFSET); + } + outb_p(value & 0xff, + data->addr + W83781D_DATA_REG_OFFSET); + w83627hf_reset_bank(data, reg); + mutex_unlock(&data->lock); + return 0; +} + +static void w83627hf_init_device(struct platform_device *pdev) +{ + struct w83627hf_data *data = platform_get_drvdata(pdev); + int i; + enum chips type = data->type; + u8 tmp; + + /* Minimize conflicts with other winbond i2c-only clients... */ + /* disable i2c subclients... how to disable main i2c client?? */ + /* force i2c address to relatively uncommon address */ + if (type == w83627hf) { + w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89); + w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c); + } + + /* Read VID only once */ + if (type == w83627hf || type == w83637hf) { + int lo = w83627hf_read_value(data, W83781D_REG_VID_FANDIV); + int hi = w83627hf_read_value(data, W83781D_REG_CHIPID); + data->vid = (lo & 0x0f) | ((hi & 0x01) << 4); + } else if (type == w83627thf) { + data->vid = w83627thf_read_gpio5(pdev); + } else if (type == w83687thf) { + data->vid = w83687thf_read_vid(pdev); + } + + /* Read VRM & OVT Config only once */ + if (type == w83627thf || type == w83637hf || type == w83687thf) { + data->vrm_ovt = + w83627hf_read_value(data, W83627THF_REG_VRM_OVT_CFG); + } + + tmp = w83627hf_read_value(data, W83781D_REG_SCFG1); + for (i = 1; i <= 3; i++) { + if (!(tmp & BIT_SCFG1[i - 1])) { + data->sens[i - 1] = 4; + } else { + if (w83627hf_read_value + (data, + W83781D_REG_SCFG2) & BIT_SCFG2[i - 1]) + data->sens[i - 1] = 1; + else + data->sens[i - 1] = 2; + } + if ((type == w83697hf) && (i == 2)) + break; + } + + if(init) { + /* Enable temp2 */ + tmp = w83627hf_read_value(data, W83627HF_REG_TEMP2_CONFIG); + if (tmp & 0x01) { + dev_warn(&pdev->dev, "Enabling temp2, readings " + "might not make sense\n"); + w83627hf_write_value(data, W83627HF_REG_TEMP2_CONFIG, + tmp & 0xfe); + } + + /* Enable temp3 */ + if (type != w83697hf) { + tmp = w83627hf_read_value(data, + W83627HF_REG_TEMP3_CONFIG); + if (tmp & 0x01) { + dev_warn(&pdev->dev, "Enabling temp3, " + "readings might not make sense\n"); + w83627hf_write_value(data, + W83627HF_REG_TEMP3_CONFIG, tmp & 0xfe); + } + } + } + + /* Start monitoring */ + w83627hf_write_value(data, W83781D_REG_CONFIG, + (w83627hf_read_value(data, + W83781D_REG_CONFIG) & 0xf7) + | 0x01); + + /* Enable VBAT monitoring if needed */ + tmp = w83627hf_read_value(data, W83781D_REG_VBAT); + if (!(tmp & 0x01)) + w83627hf_write_value(data, W83781D_REG_VBAT, tmp | 0x01); +} + +static void w83627hf_update_fan_div(struct w83627hf_data *data) +{ + int reg; + + reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV); + data->fan_div[0] = (reg >> 4) & 0x03; + data->fan_div[1] = (reg >> 6) & 0x03; + if (data->type != w83697hf) { + data->fan_div[2] = (w83627hf_read_value(data, + W83781D_REG_PIN) >> 6) & 0x03; + } + reg = w83627hf_read_value(data, W83781D_REG_VBAT); + data->fan_div[0] |= (reg >> 3) & 0x04; + data->fan_div[1] |= (reg >> 4) & 0x04; + if (data->type != w83697hf) + data->fan_div[2] |= (reg >> 5) & 0x04; +} + +static struct w83627hf_data *w83627hf_update_device(struct device *dev) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + int i, num_temps = (data->type == w83697hf) ? 2 : 3; + int num_pwms = (data->type == w83697hf) ? 2 : 3; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + for (i = 0; i <= 8; i++) { + /* skip missing sensors */ + if (((data->type == w83697hf) && (i == 1)) || + ((data->type != w83627hf && data->type != w83697hf) + && (i == 5 || i == 6))) + continue; + data->in[i] = + w83627hf_read_value(data, W83781D_REG_IN(i)); + data->in_min[i] = + w83627hf_read_value(data, + W83781D_REG_IN_MIN(i)); + data->in_max[i] = + w83627hf_read_value(data, + W83781D_REG_IN_MAX(i)); + } + for (i = 0; i <= 2; i++) { + data->fan[i] = + w83627hf_read_value(data, W83627HF_REG_FAN(i)); + data->fan_min[i] = + w83627hf_read_value(data, + W83627HF_REG_FAN_MIN(i)); + } + for (i = 0; i <= 2; i++) { + u8 tmp = w83627hf_read_value(data, + W836X7HF_REG_PWM(data->type, i)); + /* bits 0-3 are reserved in 627THF */ + if (data->type == w83627thf) + tmp &= 0xf0; + data->pwm[i] = tmp; + if (i == 1 && + (data->type == w83627hf || data->type == w83697hf)) + break; + } + if (data->type == w83627hf) { + u8 tmp = w83627hf_read_value(data, + W83627HF_REG_PWM_FREQ); + data->pwm_freq[0] = tmp & 0x07; + data->pwm_freq[1] = (tmp >> 4) & 0x07; + } else if (data->type != w83627thf) { + for (i = 1; i <= 3; i++) { + data->pwm_freq[i - 1] = + w83627hf_read_value(data, + W83637HF_REG_PWM_FREQ[i - 1]); + if (i == 2 && (data->type == w83697hf)) + break; + } + } + if (data->type != w83627hf) { + for (i = 0; i < num_pwms; i++) { + u8 tmp = w83627hf_read_value(data, + W83627THF_REG_PWM_ENABLE[i]); + data->pwm_enable[i] = + ((tmp >> W83627THF_PWM_ENABLE_SHIFT[i]) + & 0x03) + 1; + } + } + for (i = 0; i < num_temps; i++) { + data->temp[i] = w83627hf_read_value( + data, w83627hf_reg_temp[i]); + data->temp_max[i] = w83627hf_read_value( + data, w83627hf_reg_temp_over[i]); + data->temp_max_hyst[i] = w83627hf_read_value( + data, w83627hf_reg_temp_hyst[i]); + } + + w83627hf_update_fan_div(data); + + data->alarms = + w83627hf_read_value(data, W83781D_REG_ALARM1) | + (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) | + (w83627hf_read_value(data, W83781D_REG_ALARM3) << 16); + i = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2); + data->beep_mask = (i << 8) | + w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) | + w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16; + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init w83627hf_device_add(unsigned short address, + const struct w83627hf_sio_data *sio_data) +{ + struct resource res = { + .start = address + WINB_REGION_OFFSET, + .end = address + WINB_REGION_OFFSET + WINB_REGION_SIZE - 1, + .name = DRVNAME, + .flags = IORESOURCE_IO, + }; + int err; + + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + + pdev = platform_device_alloc(DRVNAME, address); + if (!pdev) { + err = -ENOMEM; + pr_err("Device allocation failed\n"); + goto exit; + } + + err = platform_device_add_resources(pdev, &res, 1); + if (err) { + pr_err("Device resource addition failed (%d)\n", err); + goto exit_device_put; + } + + err = platform_device_add_data(pdev, sio_data, + sizeof(struct w83627hf_sio_data)); + if (err) { + pr_err("Platform data allocation failed\n"); + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + pr_err("Device addition failed (%d)\n", err); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + +static int __init sensors_w83627hf_init(void) +{ + int err; + unsigned short address; + struct w83627hf_sio_data sio_data; + + if (w83627hf_find(0x2e, &address, &sio_data) + && w83627hf_find(0x4e, &address, &sio_data)) + return -ENODEV; + + err = platform_driver_register(&w83627hf_driver); + if (err) + goto exit; + + /* Sets global pdev as a side effect */ + err = w83627hf_device_add(address, &sio_data); + if (err) + goto exit_driver; + + return 0; + +exit_driver: + platform_driver_unregister(&w83627hf_driver); +exit: + return err; +} + +static void __exit sensors_w83627hf_exit(void) +{ + platform_device_unregister(pdev); + platform_driver_unregister(&w83627hf_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "and Mark Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("W83627HF driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_w83627hf_init); +module_exit(sensors_w83627hf_exit); |