summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/hwmon/tmp401.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/hwmon/tmp401.c')
-rw-r--r--kernel/drivers/hwmon/tmp401.c773
1 files changed, 773 insertions, 0 deletions
diff --git a/kernel/drivers/hwmon/tmp401.c b/kernel/drivers/hwmon/tmp401.c
new file mode 100644
index 000000000..ccf4cffe0
--- /dev/null
+++ b/kernel/drivers/hwmon/tmp401.c
@@ -0,0 +1,773 @@
+/* tmp401.c
+ *
+ * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
+ * Preliminary tmp411 support by:
+ * Gabriel Konat, Sander Leget, Wouter Willems
+ * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
+ *
+ * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
+ * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
+ *
+ * Note this IC is in some aspect similar to the LM90, but it has quite a
+ * few differences too, for example the local temp has a higher resolution
+ * and thus has 16 bits registers for its value and limit instead of 8 bits.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d,
+ 0x4e, 0x4f, I2C_CLIENT_END };
+
+enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
+
+/*
+ * The TMP401 registers, note some registers have different addresses for
+ * reading and writing
+ */
+#define TMP401_STATUS 0x02
+#define TMP401_CONFIG_READ 0x03
+#define TMP401_CONFIG_WRITE 0x09
+#define TMP401_CONVERSION_RATE_READ 0x04
+#define TMP401_CONVERSION_RATE_WRITE 0x0A
+#define TMP401_TEMP_CRIT_HYST 0x21
+#define TMP401_MANUFACTURER_ID_REG 0xFE
+#define TMP401_DEVICE_ID_REG 0xFF
+
+static const u8 TMP401_TEMP_MSB_READ[6][2] = {
+ { 0x00, 0x01 }, /* temp */
+ { 0x06, 0x08 }, /* low limit */
+ { 0x05, 0x07 }, /* high limit */
+ { 0x20, 0x19 }, /* therm (crit) limit */
+ { 0x30, 0x34 }, /* lowest */
+ { 0x32, 0x36 }, /* highest */
+};
+
+static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
+ { 0, 0 }, /* temp (unused) */
+ { 0x0C, 0x0E }, /* low limit */
+ { 0x0B, 0x0D }, /* high limit */
+ { 0x20, 0x19 }, /* therm (crit) limit */
+ { 0x30, 0x34 }, /* lowest */
+ { 0x32, 0x36 }, /* highest */
+};
+
+static const u8 TMP401_TEMP_LSB[6][2] = {
+ { 0x15, 0x10 }, /* temp */
+ { 0x17, 0x14 }, /* low limit */
+ { 0x16, 0x13 }, /* high limit */
+ { 0, 0 }, /* therm (crit) limit (unused) */
+ { 0x31, 0x35 }, /* lowest */
+ { 0x33, 0x37 }, /* highest */
+};
+
+static const u8 TMP432_TEMP_MSB_READ[4][3] = {
+ { 0x00, 0x01, 0x23 }, /* temp */
+ { 0x06, 0x08, 0x16 }, /* low limit */
+ { 0x05, 0x07, 0x15 }, /* high limit */
+ { 0x20, 0x19, 0x1A }, /* therm (crit) limit */
+};
+
+static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
+ { 0, 0, 0 }, /* temp - unused */
+ { 0x0C, 0x0E, 0x16 }, /* low limit */
+ { 0x0B, 0x0D, 0x15 }, /* high limit */
+ { 0x20, 0x19, 0x1A }, /* therm (crit) limit */
+};
+
+static const u8 TMP432_TEMP_LSB[3][3] = {
+ { 0x29, 0x10, 0x24 }, /* temp */
+ { 0x3E, 0x14, 0x18 }, /* low limit */
+ { 0x3D, 0x13, 0x17 }, /* high limit */
+};
+
+/* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
+static const u8 TMP432_STATUS_REG[] = {
+ 0x1b, 0x36, 0x35, 0x37 };
+
+/* Flags */
+#define TMP401_CONFIG_RANGE BIT(2)
+#define TMP401_CONFIG_SHUTDOWN BIT(6)
+#define TMP401_STATUS_LOCAL_CRIT BIT(0)
+#define TMP401_STATUS_REMOTE_CRIT BIT(1)
+#define TMP401_STATUS_REMOTE_OPEN BIT(2)
+#define TMP401_STATUS_REMOTE_LOW BIT(3)
+#define TMP401_STATUS_REMOTE_HIGH BIT(4)
+#define TMP401_STATUS_LOCAL_LOW BIT(5)
+#define TMP401_STATUS_LOCAL_HIGH BIT(6)
+
+/* On TMP432, each status has its own register */
+#define TMP432_STATUS_LOCAL BIT(0)
+#define TMP432_STATUS_REMOTE1 BIT(1)
+#define TMP432_STATUS_REMOTE2 BIT(2)
+
+/* Manufacturer / Device ID's */
+#define TMP401_MANUFACTURER_ID 0x55
+#define TMP401_DEVICE_ID 0x11
+#define TMP411A_DEVICE_ID 0x12
+#define TMP411B_DEVICE_ID 0x13
+#define TMP411C_DEVICE_ID 0x10
+#define TMP431_DEVICE_ID 0x31
+#define TMP432_DEVICE_ID 0x32
+#define TMP435_DEVICE_ID 0x35
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static const struct i2c_device_id tmp401_id[] = {
+ { "tmp401", tmp401 },
+ { "tmp411", tmp411 },
+ { "tmp431", tmp431 },
+ { "tmp432", tmp432 },
+ { "tmp435", tmp435 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tmp401_id);
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct tmp401_data {
+ struct i2c_client *client;
+ const struct attribute_group *groups[3];
+ struct mutex update_lock;
+ char valid; /* zero until following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+ enum chips kind;
+
+ unsigned int update_interval; /* in milliseconds */
+
+ /* register values */
+ u8 status[4];
+ u8 config;
+ u16 temp[6][3];
+ u8 temp_crit_hyst;
+};
+
+/*
+ * Sysfs attr show / store functions
+ */
+
+static int tmp401_register_to_temp(u16 reg, u8 config)
+{
+ int temp = reg;
+
+ if (config & TMP401_CONFIG_RANGE)
+ temp -= 64 * 256;
+
+ return DIV_ROUND_CLOSEST(temp * 125, 32);
+}
+
+static u16 tmp401_temp_to_register(long temp, u8 config, int zbits)
+{
+ if (config & TMP401_CONFIG_RANGE) {
+ temp = clamp_val(temp, -64000, 191000);
+ temp += 64000;
+ } else
+ temp = clamp_val(temp, 0, 127000);
+
+ return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
+}
+
+static int tmp401_update_device_reg16(struct i2c_client *client,
+ struct tmp401_data *data)
+{
+ int i, j, val;
+ int num_regs = data->kind == tmp411 ? 6 : 4;
+ int num_sensors = data->kind == tmp432 ? 3 : 2;
+
+ for (i = 0; i < num_sensors; i++) { /* local / r1 / r2 */
+ for (j = 0; j < num_regs; j++) { /* temp / low / ... */
+ u8 regaddr;
+ /*
+ * High byte must be read first immediately followed
+ * by the low byte
+ */
+ regaddr = data->kind == tmp432 ?
+ TMP432_TEMP_MSB_READ[j][i] :
+ TMP401_TEMP_MSB_READ[j][i];
+ val = i2c_smbus_read_byte_data(client, regaddr);
+ if (val < 0)
+ return val;
+ data->temp[j][i] = val << 8;
+ if (j == 3) /* crit is msb only */
+ continue;
+ regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i]
+ : TMP401_TEMP_LSB[j][i];
+ val = i2c_smbus_read_byte_data(client, regaddr);
+ if (val < 0)
+ return val;
+ data->temp[j][i] |= val;
+ }
+ }
+ return 0;
+}
+
+static struct tmp401_data *tmp401_update_device(struct device *dev)
+{
+ struct tmp401_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ struct tmp401_data *ret = data;
+ int i, val;
+ unsigned long next_update;
+
+ mutex_lock(&data->update_lock);
+
+ next_update = data->last_updated +
+ msecs_to_jiffies(data->update_interval);
+ if (time_after(jiffies, next_update) || !data->valid) {
+ if (data->kind != tmp432) {
+ /*
+ * The driver uses the TMP432 status format internally.
+ * Convert status to TMP432 format for other chips.
+ */
+ val = i2c_smbus_read_byte_data(client, TMP401_STATUS);
+ if (val < 0) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->status[0] =
+ (val & TMP401_STATUS_REMOTE_OPEN) >> 1;
+ data->status[1] =
+ ((val & TMP401_STATUS_REMOTE_LOW) >> 2) |
+ ((val & TMP401_STATUS_LOCAL_LOW) >> 5);
+ data->status[2] =
+ ((val & TMP401_STATUS_REMOTE_HIGH) >> 3) |
+ ((val & TMP401_STATUS_LOCAL_HIGH) >> 6);
+ data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT
+ | TMP401_STATUS_REMOTE_CRIT);
+ } else {
+ for (i = 0; i < ARRAY_SIZE(data->status); i++) {
+ val = i2c_smbus_read_byte_data(client,
+ TMP432_STATUS_REG[i]);
+ if (val < 0) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->status[i] = val;
+ }
+ }
+
+ val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+ if (val < 0) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->config = val;
+ val = tmp401_update_device_reg16(client, data);
+ if (val < 0) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST);
+ if (val < 0) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp_crit_hyst = val;
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+abort:
+ mutex_unlock(&data->update_lock);
+ return ret;
+}
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr_2(devattr)->nr;
+ int index = to_sensor_dev_attr_2(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n",
+ tmp401_register_to_temp(data->temp[nr][index], data->config));
+}
+
+static ssize_t show_temp_crit_hyst(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int temp, index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ mutex_lock(&data->update_lock);
+ temp = tmp401_register_to_temp(data->temp[3][index], data->config);
+ temp -= data->temp_crit_hyst * 1000;
+ mutex_unlock(&data->update_lock);
+
+ return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t show_status(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr_2(devattr)->nr;
+ int mask = to_sensor_dev_attr_2(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n", !!(data->status[nr] & mask));
+}
+
+static ssize_t store_temp(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr_2(devattr)->nr;
+ int index = to_sensor_dev_attr_2(devattr)->index;
+ struct tmp401_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ long val;
+ u16 reg;
+ u8 regaddr;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4);
+
+ mutex_lock(&data->update_lock);
+
+ regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
+ : TMP401_TEMP_MSB_WRITE[nr][index];
+ i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
+ if (nr != 3) {
+ regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index]
+ : TMP401_TEMP_LSB[nr][index];
+ i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF);
+ }
+ data->temp[nr][index] = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ int temp, index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+ long val;
+ u8 reg;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ if (data->config & TMP401_CONFIG_RANGE)
+ val = clamp_val(val, -64000, 191000);
+ else
+ val = clamp_val(val, 0, 127000);
+
+ mutex_lock(&data->update_lock);
+ temp = tmp401_register_to_temp(data->temp[3][index], data->config);
+ val = clamp_val(val, temp - 255000, temp);
+ reg = ((temp - val) + 500) / 1000;
+
+ i2c_smbus_write_byte_data(data->client, TMP401_TEMP_CRIT_HYST,
+ reg);
+
+ data->temp_crit_hyst = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/*
+ * Resets the historical measurements of minimum and maximum temperatures.
+ * This is done by writing any value to any of the minimum/maximum registers
+ * (0x30-0x37).
+ */
+static ssize_t reset_temp_history(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
+{
+ struct tmp401_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ if (val != 1) {
+ dev_err(dev,
+ "temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
+ val);
+ return -EINVAL;
+ }
+ mutex_lock(&data->update_lock);
+ i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val);
+ data->valid = 0;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_update_interval(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tmp401_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", data->update_interval);
+}
+
+static ssize_t set_update_interval(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct tmp401_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ unsigned long val;
+ int err, rate;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ /*
+ * For valid rates, interval can be calculated as
+ * interval = (1 << (7 - rate)) * 125;
+ * Rounded rate is therefore
+ * rate = 7 - __fls(interval * 4 / (125 * 3));
+ * Use clamp_val() to avoid overflows, and to ensure valid input
+ * for __fls.
+ */
+ val = clamp_val(val, 125, 16000);
+ rate = 7 - __fls(val * 4 / (125 * 3));
+ mutex_lock(&data->update_lock);
+ i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate);
+ data->update_interval = (1 << (7 - rate)) * 125;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 1, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 2, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 3, 0);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+ show_temp_crit_hyst, store_temp_crit_hyst, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL,
+ 1, TMP432_STATUS_LOCAL);
+static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL,
+ 2, TMP432_STATUS_LOCAL);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL,
+ 3, TMP432_STATUS_LOCAL);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 1, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 2, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 3, 1);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst,
+ NULL, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL,
+ 0, TMP432_STATUS_REMOTE1);
+static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL,
+ 1, TMP432_STATUS_REMOTE1);
+static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL,
+ 2, TMP432_STATUS_REMOTE1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL,
+ 3, TMP432_STATUS_REMOTE1);
+
+static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
+ set_update_interval);
+
+static struct attribute *tmp401_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+
+ &dev_attr_update_interval.attr,
+
+ NULL
+};
+
+static const struct attribute_group tmp401_group = {
+ .attrs = tmp401_attributes,
+};
+
+/*
+ * Additional features of the TMP411 chip.
+ * The TMP411 stores the minimum and maximum
+ * temperature measured since power-on, chip-reset, or
+ * minimum and maximum register reset for both the local
+ * and remote channels.
+ */
+static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1);
+static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history,
+ 0);
+
+static struct attribute *tmp411_attributes[] = {
+ &sensor_dev_attr_temp1_highest.dev_attr.attr,
+ &sensor_dev_attr_temp1_lowest.dev_attr.attr,
+ &sensor_dev_attr_temp2_highest.dev_attr.attr,
+ &sensor_dev_attr_temp2_lowest.dev_attr.attr,
+ &sensor_dev_attr_temp_reset_history.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group tmp411_group = {
+ .attrs = tmp411_attributes,
+};
+
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 1, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 2, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
+ store_temp, 3, 2);
+static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst,
+ NULL, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL,
+ 0, TMP432_STATUS_REMOTE2);
+static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL,
+ 1, TMP432_STATUS_REMOTE2);
+static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL,
+ 2, TMP432_STATUS_REMOTE2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL,
+ 3, TMP432_STATUS_REMOTE2);
+
+static struct attribute *tmp432_attributes[] = {
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+
+ NULL
+};
+
+static const struct attribute_group tmp432_group = {
+ .attrs = tmp432_attributes,
+};
+
+/*
+ * Begin non sysfs callback code (aka Real code)
+ */
+
+static int tmp401_init_client(struct tmp401_data *data,
+ struct i2c_client *client)
+{
+ int config, config_orig, status = 0;
+
+ /* Set the conversion rate to 2 Hz */
+ i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
+ data->update_interval = 500;
+
+ /* Start conversions (disable shutdown if necessary) */
+ config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+ if (config < 0)
+ return config;
+
+ config_orig = config;
+ config &= ~TMP401_CONFIG_SHUTDOWN;
+
+ if (config != config_orig)
+ status = i2c_smbus_write_byte_data(client,
+ TMP401_CONFIG_WRITE,
+ config);
+
+ return status;
+}
+
+static int tmp401_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ enum chips kind;
+ struct i2c_adapter *adapter = client->adapter;
+ u8 reg;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ /* Detect and identify the chip */
+ reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
+ if (reg != TMP401_MANUFACTURER_ID)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
+
+ switch (reg) {
+ case TMP401_DEVICE_ID:
+ if (client->addr != 0x4c)
+ return -ENODEV;
+ kind = tmp401;
+ break;
+ case TMP411A_DEVICE_ID:
+ if (client->addr != 0x4c)
+ return -ENODEV;
+ kind = tmp411;
+ break;
+ case TMP411B_DEVICE_ID:
+ if (client->addr != 0x4d)
+ return -ENODEV;
+ kind = tmp411;
+ break;
+ case TMP411C_DEVICE_ID:
+ if (client->addr != 0x4e)
+ return -ENODEV;
+ kind = tmp411;
+ break;
+ case TMP431_DEVICE_ID:
+ if (client->addr != 0x4c && client->addr != 0x4d)
+ return -ENODEV;
+ kind = tmp431;
+ break;
+ case TMP432_DEVICE_ID:
+ if (client->addr != 0x4c && client->addr != 0x4d)
+ return -ENODEV;
+ kind = tmp432;
+ break;
+ case TMP435_DEVICE_ID:
+ kind = tmp435;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+ if (reg & 0x1b)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
+ /* Datasheet says: 0x1-0x6 */
+ if (reg > 15)
+ return -ENODEV;
+
+ strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int tmp401_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ static const char * const names[] = {
+ "TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
+ };
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct tmp401_data *data;
+ int groups = 0, status;
+
+ data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ mutex_init(&data->update_lock);
+ data->kind = id->driver_data;
+
+ /* Initialize the TMP401 chip */
+ status = tmp401_init_client(data, client);
+ if (status < 0)
+ return status;
+
+ /* Register sysfs hooks */
+ data->groups[groups++] = &tmp401_group;
+
+ /* Register additional tmp411 sysfs hooks */
+ if (data->kind == tmp411)
+ data->groups[groups++] = &tmp411_group;
+
+ /* Register additional tmp432 sysfs hooks */
+ if (data->kind == tmp432)
+ data->groups[groups++] = &tmp432_group;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data, data->groups);
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
+
+ dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
+
+ return 0;
+}
+
+static struct i2c_driver tmp401_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "tmp401",
+ },
+ .probe = tmp401_probe,
+ .id_table = tmp401_id,
+ .detect = tmp401_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(tmp401_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
+MODULE_LICENSE("GPL");