diff options
Diffstat (limited to 'kernel/drivers/hwmon/k8temp.c')
| -rw-r--r-- | kernel/drivers/hwmon/k8temp.c | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/kernel/drivers/hwmon/k8temp.c b/kernel/drivers/hwmon/k8temp.c new file mode 100644 index 000000000..734d55d48 --- /dev/null +++ b/kernel/drivers/hwmon/k8temp.c @@ -0,0 +1,334 @@ +/* + * k8temp.c - Linux kernel module for hardware monitoring + * + * Copyright (C) 2006 Rudolf Marek <r.marek@assembler.cz> + * + * Inspired from the w83785 and amd756 drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301 USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/pci.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <asm/processor.h> + +#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000) +#define REG_TEMP 0xe4 +#define SEL_PLACE 0x40 +#define SEL_CORE 0x04 + +struct k8temp_data { + struct device *hwmon_dev; + struct mutex update_lock; + const char *name; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + u8 sensorsp; /* sensor presence bits - SEL_CORE, SEL_PLACE */ + u32 temp[2][2]; /* core, place */ + u8 swap_core_select; /* meaning of SEL_CORE is inverted */ + u32 temp_offset; +}; + +static struct k8temp_data *k8temp_update_device(struct device *dev) +{ + struct k8temp_data *data = dev_get_drvdata(dev); + struct pci_dev *pdev = to_pci_dev(dev); + u8 tmp; + + mutex_lock(&data->update_lock); + + if (!data->valid + || time_after(jiffies, data->last_updated + HZ)) { + pci_read_config_byte(pdev, REG_TEMP, &tmp); + tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */ + pci_write_config_byte(pdev, REG_TEMP, tmp); + pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]); + + if (data->sensorsp & SEL_PLACE) { + tmp |= SEL_PLACE; /* Select sensor 1, core0 */ + pci_write_config_byte(pdev, REG_TEMP, tmp); + pci_read_config_dword(pdev, REG_TEMP, + &data->temp[0][1]); + } + + if (data->sensorsp & SEL_CORE) { + tmp &= ~SEL_PLACE; /* Select sensor 0, core1 */ + tmp |= SEL_CORE; + pci_write_config_byte(pdev, REG_TEMP, tmp); + pci_read_config_dword(pdev, REG_TEMP, + &data->temp[1][0]); + + if (data->sensorsp & SEL_PLACE) { + tmp |= SEL_PLACE; /* Select sensor 1, core1 */ + pci_write_config_byte(pdev, REG_TEMP, tmp); + pci_read_config_dword(pdev, REG_TEMP, + &data->temp[1][1]); + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + return data; +} + +/* + * Sysfs stuff + */ + +static ssize_t show_name(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct k8temp_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", data->name); +} + + +static ssize_t show_temp(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute_2 *attr = + to_sensor_dev_attr_2(devattr); + int core = attr->nr; + int place = attr->index; + int temp; + struct k8temp_data *data = k8temp_update_device(dev); + + if (data->swap_core_select && (data->sensorsp & SEL_CORE)) + core = core ? 0 : 1; + + temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset; + + return sprintf(buf, "%d\n", temp); +} + +/* core, place */ + +static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0); +static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1); +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static const struct pci_device_id k8temp_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, + { 0 }, +}; + +MODULE_DEVICE_TABLE(pci, k8temp_ids); + +static int is_rev_g_desktop(u8 model) +{ + u32 brandidx; + + if (model < 0x69) + return 0; + + if (model == 0xc1 || model == 0x6c || model == 0x7c) + return 0; + + /* + * Differentiate between AM2 and ASB1. + * See "Constructing the processor Name String" in "Revision + * Guide for AMD NPT Family 0Fh Processors" (33610). + */ + brandidx = cpuid_ebx(0x80000001); + brandidx = (brandidx >> 9) & 0x1f; + + /* Single core */ + if ((model == 0x6f || model == 0x7f) && + (brandidx == 0x7 || brandidx == 0x9 || brandidx == 0xc)) + return 0; + + /* Dual core */ + if (model == 0x6b && + (brandidx == 0xb || brandidx == 0xc)) + return 0; + + return 1; +} + +static int k8temp_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int err; + u8 scfg; + u32 temp; + u8 model, stepping; + struct k8temp_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(struct k8temp_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + model = boot_cpu_data.x86_model; + stepping = boot_cpu_data.x86_mask; + + /* feature available since SH-C0, exclude older revisions */ + if ((model == 4 && stepping == 0) || + (model == 5 && stepping <= 1)) + return -ENODEV; + + /* + * AMD NPT family 0fh, i.e. RevF and RevG: + * meaning of SEL_CORE bit is inverted + */ + if (model >= 0x40) { + data->swap_core_select = 1; + dev_warn(&pdev->dev, + "Temperature readouts might be wrong - check erratum #141\n"); + } + + /* + * RevG desktop CPUs (i.e. no socket S1G1 or ASB1 parts) need + * additional offset, otherwise reported temperature is below + * ambient temperature + */ + if (is_rev_g_desktop(model)) + data->temp_offset = 21000; + + pci_read_config_byte(pdev, REG_TEMP, &scfg); + scfg &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */ + pci_write_config_byte(pdev, REG_TEMP, scfg); + pci_read_config_byte(pdev, REG_TEMP, &scfg); + + if (scfg & (SEL_PLACE | SEL_CORE)) { + dev_err(&pdev->dev, "Configuration bit(s) stuck at 1!\n"); + return -ENODEV; + } + + scfg |= (SEL_PLACE | SEL_CORE); + pci_write_config_byte(pdev, REG_TEMP, scfg); + + /* now we know if we can change core and/or sensor */ + pci_read_config_byte(pdev, REG_TEMP, &data->sensorsp); + + if (data->sensorsp & SEL_PLACE) { + scfg &= ~SEL_CORE; /* Select sensor 1, core0 */ + pci_write_config_byte(pdev, REG_TEMP, scfg); + pci_read_config_dword(pdev, REG_TEMP, &temp); + scfg |= SEL_CORE; /* prepare for next selection */ + if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is unlikely */ + data->sensorsp &= ~SEL_PLACE; + } + + if (data->sensorsp & SEL_CORE) { + scfg &= ~SEL_PLACE; /* Select sensor 0, core1 */ + pci_write_config_byte(pdev, REG_TEMP, scfg); + pci_read_config_dword(pdev, REG_TEMP, &temp); + if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is unlikely */ + data->sensorsp &= ~SEL_CORE; + } + + data->name = "k8temp"; + mutex_init(&data->update_lock); + pci_set_drvdata(pdev, data); + + /* Register sysfs hooks */ + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_input.dev_attr); + if (err) + goto exit_remove; + + /* sensor can be changed and reports something */ + if (data->sensorsp & SEL_PLACE) { + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp2_input.dev_attr); + if (err) + goto exit_remove; + } + + /* core can be changed and reports something */ + if (data->sensorsp & SEL_CORE) { + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp3_input.dev_attr); + if (err) + goto exit_remove; + if (data->sensorsp & SEL_PLACE) { + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp4_input. + dev_attr); + if (err) + goto exit_remove; + } + } + + err = device_create_file(&pdev->dev, &dev_attr_name); + if (err) + goto exit_remove; + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp2_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp3_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp4_input.dev_attr); + device_remove_file(&pdev->dev, &dev_attr_name); + return err; +} + +static void k8temp_remove(struct pci_dev *pdev) +{ + struct k8temp_data *data = pci_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp2_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp3_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp4_input.dev_attr); + device_remove_file(&pdev->dev, &dev_attr_name); +} + +static struct pci_driver k8temp_driver = { + .name = "k8temp", + .id_table = k8temp_ids, + .probe = k8temp_probe, + .remove = k8temp_remove, +}; + +module_pci_driver(k8temp_driver); + +MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>"); +MODULE_DESCRIPTION("AMD K8 core temperature monitor"); +MODULE_LICENSE("GPL"); |