summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/gpu/drm/i915/intel_psr.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/gpu/drm/i915/intel_psr.c')
-rw-r--r--kernel/drivers/gpu/drm/i915/intel_psr.c665
1 files changed, 665 insertions, 0 deletions
diff --git a/kernel/drivers/gpu/drm/i915/intel_psr.c b/kernel/drivers/gpu/drm/i915/intel_psr.c
new file mode 100644
index 000000000..a8f934825
--- /dev/null
+++ b/kernel/drivers/gpu/drm/i915/intel_psr.c
@@ -0,0 +1,665 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+/**
+ * DOC: Panel Self Refresh (PSR/SRD)
+ *
+ * Since Haswell Display controller supports Panel Self-Refresh on display
+ * panels witch have a remote frame buffer (RFB) implemented according to PSR
+ * spec in eDP1.3. PSR feature allows the display to go to lower standby states
+ * when system is idle but display is on as it eliminates display refresh
+ * request to DDR memory completely as long as the frame buffer for that
+ * display is unchanged.
+ *
+ * Panel Self Refresh must be supported by both Hardware (source) and
+ * Panel (sink).
+ *
+ * PSR saves power by caching the framebuffer in the panel RFB, which allows us
+ * to power down the link and memory controller. For DSI panels the same idea
+ * is called "manual mode".
+ *
+ * The implementation uses the hardware-based PSR support which automatically
+ * enters/exits self-refresh mode. The hardware takes care of sending the
+ * required DP aux message and could even retrain the link (that part isn't
+ * enabled yet though). The hardware also keeps track of any frontbuffer
+ * changes to know when to exit self-refresh mode again. Unfortunately that
+ * part doesn't work too well, hence why the i915 PSR support uses the
+ * software frontbuffer tracking to make sure it doesn't miss a screen
+ * update. For this integration intel_psr_invalidate() and intel_psr_flush()
+ * get called by the frontbuffer tracking code. Note that because of locking
+ * issues the self-refresh re-enable code is done from a work queue, which
+ * must be correctly synchronized/cancelled when shutting down the pipe."
+ */
+
+#include <drm/drmP.h>
+
+#include "intel_drv.h"
+#include "i915_drv.h"
+
+static bool is_edp_psr(struct intel_dp *intel_dp)
+{
+ return intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED;
+}
+
+static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t val;
+
+ val = I915_READ(VLV_PSRSTAT(pipe)) &
+ VLV_EDP_PSR_CURR_STATE_MASK;
+ return (val == VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
+ (val == VLV_EDP_PSR_ACTIVE_SF_UPDATE);
+}
+
+static void intel_psr_write_vsc(struct intel_dp *intel_dp,
+ struct edp_vsc_psr *vsc_psr)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
+ u32 ctl_reg = HSW_TVIDEO_DIP_CTL(crtc->config->cpu_transcoder);
+ u32 data_reg = HSW_TVIDEO_DIP_VSC_DATA(crtc->config->cpu_transcoder);
+ uint32_t *data = (uint32_t *) vsc_psr;
+ unsigned int i;
+
+ /* As per BSPec (Pipe Video Data Island Packet), we need to disable
+ the video DIP being updated before program video DIP data buffer
+ registers for DIP being updated. */
+ I915_WRITE(ctl_reg, 0);
+ POSTING_READ(ctl_reg);
+
+ for (i = 0; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4) {
+ if (i < sizeof(struct edp_vsc_psr))
+ I915_WRITE(data_reg + i, *data++);
+ else
+ I915_WRITE(data_reg + i, 0);
+ }
+
+ I915_WRITE(ctl_reg, VIDEO_DIP_ENABLE_VSC_HSW);
+ POSTING_READ(ctl_reg);
+}
+
+static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
+ uint32_t val;
+
+ /* VLV auto-generate VSC package as per EDP 1.3 spec, Table 3.10 */
+ val = I915_READ(VLV_VSCSDP(pipe));
+ val &= ~VLV_EDP_PSR_SDP_FREQ_MASK;
+ val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME;
+ I915_WRITE(VLV_VSCSDP(pipe), val);
+}
+
+static void hsw_psr_setup_vsc(struct intel_dp *intel_dp)
+{
+ struct edp_vsc_psr psr_vsc;
+
+ /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
+ memset(&psr_vsc, 0, sizeof(psr_vsc));
+ psr_vsc.sdp_header.HB0 = 0;
+ psr_vsc.sdp_header.HB1 = 0x7;
+ psr_vsc.sdp_header.HB2 = 0x2;
+ psr_vsc.sdp_header.HB3 = 0x8;
+ intel_psr_write_vsc(intel_dp, &psr_vsc);
+}
+
+static void vlv_psr_enable_sink(struct intel_dp *intel_dp)
+{
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
+ DP_PSR_ENABLE);
+}
+
+static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t aux_clock_divider;
+ uint32_t aux_data_reg, aux_ctl_reg;
+ int precharge = 0x3;
+ static const uint8_t aux_msg[] = {
+ [0] = DP_AUX_NATIVE_WRITE << 4,
+ [1] = DP_SET_POWER >> 8,
+ [2] = DP_SET_POWER & 0xff,
+ [3] = 1 - 1,
+ [4] = DP_SET_POWER_D0,
+ };
+ int i;
+
+ BUILD_BUG_ON(sizeof(aux_msg) > 20);
+
+ aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
+
+ /* Enable PSR in sink */
+ if (dev_priv->psr.link_standby)
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
+ DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
+ else
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
+ DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE);
+
+ aux_data_reg = (INTEL_INFO(dev)->gen >= 9) ?
+ DPA_AUX_CH_DATA1 : EDP_PSR_AUX_DATA1(dev);
+ aux_ctl_reg = (INTEL_INFO(dev)->gen >= 9) ?
+ DPA_AUX_CH_CTL : EDP_PSR_AUX_CTL(dev);
+
+ /* Setup AUX registers */
+ for (i = 0; i < sizeof(aux_msg); i += 4)
+ I915_WRITE(aux_data_reg + i,
+ intel_dp_pack_aux(&aux_msg[i], sizeof(aux_msg) - i));
+
+ if (INTEL_INFO(dev)->gen >= 9) {
+ uint32_t val;
+
+ val = I915_READ(aux_ctl_reg);
+ val &= ~DP_AUX_CH_CTL_TIME_OUT_MASK;
+ val |= DP_AUX_CH_CTL_TIME_OUT_1600us;
+ val &= ~DP_AUX_CH_CTL_MESSAGE_SIZE_MASK;
+ val |= (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+ /* Use hardcoded data values for PSR */
+ val &= ~DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL;
+ I915_WRITE(aux_ctl_reg, val);
+ } else {
+ I915_WRITE(aux_ctl_reg,
+ DP_AUX_CH_CTL_TIME_OUT_400us |
+ (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+ (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+ (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
+ }
+}
+
+static void vlv_psr_enable_source(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dig_port->base.base.crtc;
+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
+
+ /* Transition from PSR_state 0 to PSR_state 1, i.e. PSR Inactive */
+ I915_WRITE(VLV_PSRCTL(pipe),
+ VLV_EDP_PSR_MODE_SW_TIMER |
+ VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
+ VLV_EDP_PSR_ENABLE);
+}
+
+static void vlv_psr_activate(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dig_port->base.base.crtc;
+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
+
+ /* Let's do the transition from PSR_state 1 to PSR_state 2
+ * that is PSR transition to active - static frame transmission.
+ * Then Hardware is responsible for the transition to PSR_state 3
+ * that is PSR active - no Remote Frame Buffer (RFB) update.
+ */
+ I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
+ VLV_EDP_PSR_ACTIVE_ENTRY);
+}
+
+static void hsw_psr_enable_source(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t max_sleep_time = 0x1f;
+ /* Lately it was identified that depending on panel idle frame count
+ * calculated at HW can be off by 1. So let's use what came
+ * from VBT + 1 and at minimum 2 to be on the safe side.
+ */
+ uint32_t idle_frames = dev_priv->vbt.psr.idle_frames ?
+ dev_priv->vbt.psr.idle_frames + 1 : 2;
+ uint32_t val = 0x0;
+ const uint32_t link_entry_time = EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
+
+ if (dev_priv->psr.link_standby) {
+ val |= EDP_PSR_LINK_STANDBY;
+ val |= EDP_PSR_TP2_TP3_TIME_0us;
+ val |= EDP_PSR_TP1_TIME_0us;
+ val |= EDP_PSR_SKIP_AUX_EXIT;
+ } else
+ val |= EDP_PSR_LINK_DISABLE;
+
+ I915_WRITE(EDP_PSR_CTL(dev), val |
+ (IS_BROADWELL(dev) ? 0 : link_entry_time) |
+ max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
+ idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
+ EDP_PSR_ENABLE);
+}
+
+static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dig_port->base.base.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ lockdep_assert_held(&dev_priv->psr.lock);
+ WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
+ WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
+
+ dev_priv->psr.source_ok = false;
+
+ if (IS_HASWELL(dev) && dig_port->port != PORT_A) {
+ DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
+ return false;
+ }
+
+ if (!i915.enable_psr) {
+ DRM_DEBUG_KMS("PSR disable by flag\n");
+ return false;
+ }
+
+ if (IS_HASWELL(dev) &&
+ I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config->cpu_transcoder)) &
+ S3D_ENABLE) {
+ DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
+ return false;
+ }
+
+ if (IS_HASWELL(dev) &&
+ intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
+ DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
+ return false;
+ }
+
+ dev_priv->psr.source_ok = true;
+ return true;
+}
+
+static void intel_psr_activate(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
+ WARN_ON(dev_priv->psr.active);
+ lockdep_assert_held(&dev_priv->psr.lock);
+
+ /* Enable/Re-enable PSR on the host */
+ if (HAS_DDI(dev))
+ /* On HSW+ after we enable PSR on source it will activate it
+ * as soon as it match configure idle_frame count. So
+ * we just actually enable it here on activation time.
+ */
+ hsw_psr_enable_source(intel_dp);
+ else
+ vlv_psr_activate(intel_dp);
+
+ dev_priv->psr.active = true;
+}
+
+/**
+ * intel_psr_enable - Enable PSR
+ * @intel_dp: Intel DP
+ *
+ * This function can only be called after the pipe is fully trained and enabled.
+ */
+void intel_psr_enable(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (!HAS_PSR(dev)) {
+ DRM_DEBUG_KMS("PSR not supported on this platform\n");
+ return;
+ }
+
+ if (!is_edp_psr(intel_dp)) {
+ DRM_DEBUG_KMS("PSR not supported by this panel\n");
+ return;
+ }
+
+ mutex_lock(&dev_priv->psr.lock);
+ if (dev_priv->psr.enabled) {
+ DRM_DEBUG_KMS("PSR already in use\n");
+ goto unlock;
+ }
+
+ if (!intel_psr_match_conditions(intel_dp))
+ goto unlock;
+
+ /* First we check VBT, but we must respect sink and source
+ * known restrictions */
+ dev_priv->psr.link_standby = dev_priv->vbt.psr.full_link;
+ if ((intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) ||
+ (IS_BROADWELL(dev) && intel_dig_port->port != PORT_A))
+ dev_priv->psr.link_standby = true;
+
+ dev_priv->psr.busy_frontbuffer_bits = 0;
+
+ if (HAS_DDI(dev)) {
+ hsw_psr_setup_vsc(intel_dp);
+
+ /* Avoid continuous PSR exit by masking memup and hpd */
+ I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
+ EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
+
+ /* Enable PSR on the panel */
+ hsw_psr_enable_sink(intel_dp);
+
+ if (INTEL_INFO(dev)->gen >= 9)
+ intel_psr_activate(intel_dp);
+ } else {
+ vlv_psr_setup_vsc(intel_dp);
+
+ /* Enable PSR on the panel */
+ vlv_psr_enable_sink(intel_dp);
+
+ /* On HSW+ enable_source also means go to PSR entry/active
+ * state as soon as idle_frame achieved and here would be
+ * to soon. However on VLV enable_source just enable PSR
+ * but let it on inactive state. So we might do this prior
+ * to active transition, i.e. here.
+ */
+ vlv_psr_enable_source(intel_dp);
+ }
+
+ dev_priv->psr.enabled = intel_dp;
+unlock:
+ mutex_unlock(&dev_priv->psr.lock);
+}
+
+static void vlv_psr_disable(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(intel_dig_port->base.base.crtc);
+ uint32_t val;
+
+ if (dev_priv->psr.active) {
+ /* Put VLV PSR back to PSR_state 0 that is PSR Disabled. */
+ if (wait_for((I915_READ(VLV_PSRSTAT(intel_crtc->pipe)) &
+ VLV_EDP_PSR_IN_TRANS) == 0, 1))
+ WARN(1, "PSR transition took longer than expected\n");
+
+ val = I915_READ(VLV_PSRCTL(intel_crtc->pipe));
+ val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
+ val &= ~VLV_EDP_PSR_ENABLE;
+ val &= ~VLV_EDP_PSR_MODE_MASK;
+ I915_WRITE(VLV_PSRCTL(intel_crtc->pipe), val);
+
+ dev_priv->psr.active = false;
+ } else {
+ WARN_ON(vlv_is_psr_active_on_pipe(dev, intel_crtc->pipe));
+ }
+}
+
+static void hsw_psr_disable(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->psr.active) {
+ I915_WRITE(EDP_PSR_CTL(dev),
+ I915_READ(EDP_PSR_CTL(dev)) & ~EDP_PSR_ENABLE);
+
+ /* Wait till PSR is idle */
+ if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev)) &
+ EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10))
+ DRM_ERROR("Timed out waiting for PSR Idle State\n");
+
+ dev_priv->psr.active = false;
+ } else {
+ WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
+ }
+}
+
+/**
+ * intel_psr_disable - Disable PSR
+ * @intel_dp: Intel DP
+ *
+ * This function needs to be called before disabling pipe.
+ */
+void intel_psr_disable(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ mutex_lock(&dev_priv->psr.lock);
+ if (!dev_priv->psr.enabled) {
+ mutex_unlock(&dev_priv->psr.lock);
+ return;
+ }
+
+ if (HAS_DDI(dev))
+ hsw_psr_disable(intel_dp);
+ else
+ vlv_psr_disable(intel_dp);
+
+ dev_priv->psr.enabled = NULL;
+ mutex_unlock(&dev_priv->psr.lock);
+
+ cancel_delayed_work_sync(&dev_priv->psr.work);
+}
+
+static void intel_psr_work(struct work_struct *work)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(work, typeof(*dev_priv), psr.work.work);
+ struct intel_dp *intel_dp = dev_priv->psr.enabled;
+ struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
+
+ /* We have to make sure PSR is ready for re-enable
+ * otherwise it keeps disabled until next full enable/disable cycle.
+ * PSR might take some time to get fully disabled
+ * and be ready for re-enable.
+ */
+ if (HAS_DDI(dev_priv->dev)) {
+ if (wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev_priv->dev)) &
+ EDP_PSR_STATUS_STATE_MASK) == 0, 50)) {
+ DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
+ return;
+ }
+ } else {
+ if (wait_for((I915_READ(VLV_PSRSTAT(pipe)) &
+ VLV_EDP_PSR_IN_TRANS) == 0, 1)) {
+ DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
+ return;
+ }
+ }
+ mutex_lock(&dev_priv->psr.lock);
+ intel_dp = dev_priv->psr.enabled;
+
+ if (!intel_dp)
+ goto unlock;
+
+ /*
+ * The delayed work can race with an invalidate hence we need to
+ * recheck. Since psr_flush first clears this and then reschedules we
+ * won't ever miss a flush when bailing out here.
+ */
+ if (dev_priv->psr.busy_frontbuffer_bits)
+ goto unlock;
+
+ intel_psr_activate(intel_dp);
+unlock:
+ mutex_unlock(&dev_priv->psr.lock);
+}
+
+static void intel_psr_exit(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp *intel_dp = dev_priv->psr.enabled;
+ struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
+ u32 val;
+
+ if (!dev_priv->psr.active)
+ return;
+
+ if (HAS_DDI(dev)) {
+ val = I915_READ(EDP_PSR_CTL(dev));
+
+ WARN_ON(!(val & EDP_PSR_ENABLE));
+
+ I915_WRITE(EDP_PSR_CTL(dev), val & ~EDP_PSR_ENABLE);
+ } else {
+ val = I915_READ(VLV_PSRCTL(pipe));
+
+ /* Here we do the transition from PSR_state 3 to PSR_state 5
+ * directly once PSR State 4 that is active with single frame
+ * update can be skipped. PSR_state 5 that is PSR exit then
+ * Hardware is responsible to transition back to PSR_state 1
+ * that is PSR inactive. Same state after
+ * vlv_edp_psr_enable_source.
+ */
+ val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
+ I915_WRITE(VLV_PSRCTL(pipe), val);
+
+ /* Send AUX wake up - Spec says after transitioning to PSR
+ * active we have to send AUX wake up by writing 01h in DPCD
+ * 600h of sink device.
+ * XXX: This might slow down the transition, but without this
+ * HW doesn't complete the transition to PSR_state 1 and we
+ * never get the screen updated.
+ */
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
+ DP_SET_POWER_D0);
+ }
+
+ dev_priv->psr.active = false;
+}
+
+/**
+ * intel_psr_invalidate - Invalidade PSR
+ * @dev: DRM device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * Since the hardware frontbuffer tracking has gaps we need to integrate
+ * with the software frontbuffer tracking. This function gets called every
+ * time frontbuffer rendering starts and a buffer gets dirtied. PSR must be
+ * disabled if the frontbuffer mask contains a buffer relevant to PSR.
+ *
+ * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits."
+ */
+void intel_psr_invalidate(struct drm_device *dev,
+ unsigned frontbuffer_bits)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ enum pipe pipe;
+
+ mutex_lock(&dev_priv->psr.lock);
+ if (!dev_priv->psr.enabled) {
+ mutex_unlock(&dev_priv->psr.lock);
+ return;
+ }
+
+ crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
+ pipe = to_intel_crtc(crtc)->pipe;
+
+ intel_psr_exit(dev);
+
+ frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
+
+ dev_priv->psr.busy_frontbuffer_bits |= frontbuffer_bits;
+ mutex_unlock(&dev_priv->psr.lock);
+}
+
+/**
+ * intel_psr_flush - Flush PSR
+ * @dev: DRM device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * Since the hardware frontbuffer tracking has gaps we need to integrate
+ * with the software frontbuffer tracking. This function gets called every
+ * time frontbuffer rendering has completed and flushed out to memory. PSR
+ * can be enabled again if no other frontbuffer relevant to PSR is dirty.
+ *
+ * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits.
+ */
+void intel_psr_flush(struct drm_device *dev,
+ unsigned frontbuffer_bits)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ enum pipe pipe;
+
+ mutex_lock(&dev_priv->psr.lock);
+ if (!dev_priv->psr.enabled) {
+ mutex_unlock(&dev_priv->psr.lock);
+ return;
+ }
+
+ crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
+ pipe = to_intel_crtc(crtc)->pipe;
+ dev_priv->psr.busy_frontbuffer_bits &= ~frontbuffer_bits;
+
+ /*
+ * On Haswell sprite plane updates don't result in a psr invalidating
+ * signal in the hardware. Which means we need to manually fake this in
+ * software for all flushes, not just when we've seen a preceding
+ * invalidation through frontbuffer rendering.
+ */
+ if (IS_HASWELL(dev) &&
+ (frontbuffer_bits & INTEL_FRONTBUFFER_SPRITE(pipe)))
+ intel_psr_exit(dev);
+
+ /*
+ * On Valleyview and Cherryview we don't use hardware tracking so
+ * any plane updates or cursor moves don't result in a PSR
+ * invalidating. Which means we need to manually fake this in
+ * software for all flushes, not just when we've seen a preceding
+ * invalidation through frontbuffer rendering. */
+ if (!HAS_DDI(dev))
+ intel_psr_exit(dev);
+
+ if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)
+ schedule_delayed_work(&dev_priv->psr.work,
+ msecs_to_jiffies(100));
+ mutex_unlock(&dev_priv->psr.lock);
+}
+
+/**
+ * intel_psr_init - Init basic PSR work and mutex.
+ * @dev: DRM device
+ *
+ * This function is called only once at driver load to initialize basic
+ * PSR stuff.
+ */
+void intel_psr_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
+ mutex_init(&dev_priv->psr.lock);
+}