1 files changed, 24 insertions, 82 deletions

diff --git a/kernel/drivers/gpu/drm/i915/intel_crt.c b/kernel/drivers/gpu/drm/i915/intel_crt.c
index 515d71237..6a2c76e36 100644
--- a/kernel/drivers/gpu/drm/i915/intel_crt.c
+++ b/kernel/drivers/gpu/drm/i915/intel_crt.c
@@ -138,18 +138,6 @@ static void hsw_crt_get_config(struct intel_encoder *encoder,
 	pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
 }
 
-static void hsw_crt_pre_enable(struct intel_encoder *encoder)
-{
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL already enabled\n");
-	I915_WRITE(SPLL_CTL,
-		   SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC);
-	POSTING_READ(SPLL_CTL);
-	udelay(20);
-}
-
 /* Note: The caller is required to filter out dpms modes not supported by the
  * platform. */
 static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
@@ -158,7 +146,7 @@ static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
 	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
-	struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
+	const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
 	u32 adpa;
 
 	if (INTEL_INFO(dev)->gen >= 5)
@@ -207,18 +195,13 @@ static void intel_disable_crt(struct intel_encoder *encoder)
 	intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
 }
 
-
-static void hsw_crt_post_disable(struct intel_encoder *encoder)
+static void pch_disable_crt(struct intel_encoder *encoder)
 {
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t val;
+}
 
-	DRM_DEBUG_KMS("Disabling SPLL\n");
-	val = I915_READ(SPLL_CTL);
-	WARN_ON(!(val & SPLL_PLL_ENABLE));
-	I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
-	POSTING_READ(SPLL_CTL);
+static void pch_post_disable_crt(struct intel_encoder *encoder)
+{
+	intel_disable_crt(encoder);
 }
 
 static void intel_enable_crt(struct intel_encoder *encoder)
@@ -228,53 +211,6 @@ static void intel_enable_crt(struct intel_encoder *encoder)
 	intel_crt_set_dpms(encoder, crt->connector->base.dpms);
 }
 
-/* Special dpms function to support cloning between dvo/sdvo/crt. */
-static void intel_crt_dpms(struct drm_connector *connector, int mode)
-{
-	struct drm_device *dev = connector->dev;
-	struct intel_encoder *encoder = intel_attached_encoder(connector);
-	struct drm_crtc *crtc;
-	int old_dpms;
-
-	/* PCH platforms and VLV only support on/off. */
-	if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
-		mode = DRM_MODE_DPMS_OFF;
-
-	if (mode == connector->dpms)
-		return;
-
-	old_dpms = connector->dpms;
-	connector->dpms = mode;
-
-	/* Only need to change hw state when actually enabled */
-	crtc = encoder->base.crtc;
-	if (!crtc) {
-		encoder->connectors_active = false;
-		return;
-	}
-
-	/* We need the pipe to run for anything but OFF. */
-	if (mode == DRM_MODE_DPMS_OFF)
-		encoder->connectors_active = false;
-	else
-		encoder->connectors_active = true;
-
-	/* We call connector dpms manually below in case pipe dpms doesn't
-	 * change due to cloning. */
-	if (mode < old_dpms) {
-		/* From off to on, enable the pipe first. */
-		intel_crtc_update_dpms(crtc);
-
-		intel_crt_set_dpms(encoder, mode);
-	} else {
-		intel_crt_set_dpms(encoder, mode);
-
-		intel_crtc_update_dpms(crtc);
-	}
-
-	intel_modeset_check_state(connector->dev);
-}
-
 static enum drm_mode_status
 intel_crt_mode_valid(struct drm_connector *connector,
 		     struct drm_display_mode *mode)
@@ -319,6 +255,10 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,
 	if (HAS_DDI(dev)) {
 		pipe_config->ddi_pll_sel = PORT_CLK_SEL_SPLL;
 		pipe_config->port_clock = 135000 * 2;
+
+		pipe_config->dpll_hw_state.wrpll = 0;
+		pipe_config->dpll_hw_state.spll =
+			SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;
 	}
 
 	return true;
@@ -415,7 +355,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 hotplug_en, orig, stat;
+	u32 stat;
 	bool ret = false;
 	int i, tries = 0;
 
@@ -434,12 +374,12 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 		tries = 2;
 	else
 		tries = 1;
-	hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
-	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
 	for (i = 0; i < tries ; i++) {
 		/* turn on the FORCE_DETECT */
-		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+		i915_hotplug_interrupt_update(dev_priv,
+					      CRT_HOTPLUG_FORCE_DETECT,
+					      CRT_HOTPLUG_FORCE_DETECT);
 		/* wait for FORCE_DETECT to go off */
 		if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
 			      CRT_HOTPLUG_FORCE_DETECT) == 0,
@@ -454,8 +394,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	/* clear the interrupt we just generated, if any */
 	I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
 
-	/* and put the bits back */
-	I915_WRITE(PORT_HOTPLUG_EN, orig);
+	i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0);
 
 	return ret;
 }
@@ -747,7 +686,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 		goto out;
 
 	/* Try to probe digital port for output in DVI-I -> VGA mode. */
-	i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
+	i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB);
 	ret = intel_crt_ddc_get_modes(connector, i2c);
 
 out:
@@ -790,7 +729,7 @@ static void intel_crt_reset(struct drm_connector *connector)
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 	.reset = intel_crt_reset,
-	.dpms = intel_crt_dpms,
+	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.destroy = intel_crt_destroy,
@@ -888,15 +827,18 @@ void intel_crt_init(struct drm_device *dev)
 		crt->adpa_reg = ADPA;
 
 	crt->base.compute_config = intel_crt_compute_config;
-	crt->base.disable = intel_disable_crt;
+	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev)) {
+		crt->base.disable = pch_disable_crt;
+		crt->base.post_disable = pch_post_disable_crt;
+	} else {
+		crt->base.disable = intel_disable_crt;
+	}
 	crt->base.enable = intel_enable_crt;
 	if (I915_HAS_HOTPLUG(dev))
 		crt->base.hpd_pin = HPD_CRT;
 	if (HAS_DDI(dev)) {
 		crt->base.get_config = hsw_crt_get_config;
 		crt->base.get_hw_state = intel_ddi_get_hw_state;
-		crt->base.pre_enable = hsw_crt_pre_enable;
-		crt->base.post_disable = hsw_crt_post_disable;
 	} else {
 		crt->base.get_config = intel_crt_get_config;
 		crt->base.get_hw_state = intel_crt_get_hw_state;
@@ -925,7 +867,7 @@ void intel_crt_init(struct drm_device *dev)
 		u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |
 				 FDI_RX_LINK_REVERSAL_OVERRIDE;
 
-		dev_priv->fdi_rx_config = I915_READ(_FDI_RXA_CTL) & fdi_config;
+		dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config;
 	}
 
 	intel_crt_reset(connector);