diff options
Diffstat (limited to 'kernel/drivers/gpu/drm/drm_crtc_helper.c')
| -rw-r--r-- | kernel/drivers/gpu/drm/drm_crtc_helper.c | 1026 |
1 files changed, 1026 insertions, 0 deletions
diff --git a/kernel/drivers/gpu/drm/drm_crtc_helper.c b/kernel/drivers/gpu/drm/drm_crtc_helper.c new file mode 100644 index 000000000..ab00286ae --- /dev/null +++ b/kernel/drivers/gpu/drm/drm_crtc_helper.c @@ -0,0 +1,1026 @@ +/* + * Copyright (c) 2006-2008 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * + * DRM core CRTC related functions + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + * + * Authors: + * Keith Packard + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/moduleparam.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic.h> +#include <drm/drm_crtc.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_plane_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> + +/** + * DOC: overview + * + * The CRTC modeset helper library provides a default set_config implementation + * in drm_crtc_helper_set_config(). Plus a few other convenience functions using + * the same callbacks which drivers can use to e.g. restore the modeset + * configuration on resume with drm_helper_resume_force_mode(). + * + * The driver callbacks are mostly compatible with the atomic modeset helpers, + * except for the handling of the primary plane: Atomic helpers require that the + * primary plane is implemented as a real standalone plane and not directly tied + * to the CRTC state. For easier transition this library provides functions to + * implement the old semantics required by the CRTC helpers using the new plane + * and atomic helper callbacks. + * + * Drivers are strongly urged to convert to the atomic helpers (by way of first + * converting to the plane helpers). New drivers must not use these functions + * but need to implement the atomic interface instead, potentially using the + * atomic helpers for that. + */ +MODULE_AUTHOR("David Airlie, Jesse Barnes"); +MODULE_DESCRIPTION("DRM KMS helper"); +MODULE_LICENSE("GPL and additional rights"); + +/** + * drm_helper_move_panel_connectors_to_head() - move panels to the front in the + * connector list + * @dev: drm device to operate on + * + * Some userspace presumes that the first connected connector is the main + * display, where it's supposed to display e.g. the login screen. For + * laptops, this should be the main panel. Use this function to sort all + * (eDP/LVDS) panels to the front of the connector list, instead of + * painstakingly trying to initialize them in the right order. + */ +void drm_helper_move_panel_connectors_to_head(struct drm_device *dev) +{ + struct drm_connector *connector, *tmp; + struct list_head panel_list; + + INIT_LIST_HEAD(&panel_list); + + list_for_each_entry_safe(connector, tmp, + &dev->mode_config.connector_list, head) { + if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS || + connector->connector_type == DRM_MODE_CONNECTOR_eDP) + list_move_tail(&connector->head, &panel_list); + } + + list_splice(&panel_list, &dev->mode_config.connector_list); +} +EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head); + +/** + * drm_helper_encoder_in_use - check if a given encoder is in use + * @encoder: encoder to check + * + * Checks whether @encoder is with the current mode setting output configuration + * in use by any connector. This doesn't mean that it is actually enabled since + * the DPMS state is tracked separately. + * + * Returns: + * True if @encoder is used, false otherwise. + */ +bool drm_helper_encoder_in_use(struct drm_encoder *encoder) +{ + struct drm_connector *connector; + struct drm_device *dev = encoder->dev; + + /* + * We can expect this mutex to be locked if we are not panicking. + * Locking is currently fubar in the panic handler. + */ + if (!oops_in_progress) { + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); + } + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder == encoder) + return true; + return false; +} +EXPORT_SYMBOL(drm_helper_encoder_in_use); + +/** + * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config + * @crtc: CRTC to check + * + * Checks whether @crtc is with the current mode setting output configuration + * in use by any connector. This doesn't mean that it is actually enabled since + * the DPMS state is tracked separately. + * + * Returns: + * True if @crtc is used, false otherwise. + */ +bool drm_helper_crtc_in_use(struct drm_crtc *crtc) +{ + struct drm_encoder *encoder; + struct drm_device *dev = crtc->dev; + + /* + * We can expect this mutex to be locked if we are not panicking. + * Locking is currently fubar in the panic handler. + */ + if (!oops_in_progress) + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder)) + return true; + return false; +} +EXPORT_SYMBOL(drm_helper_crtc_in_use); + +static void +drm_encoder_disable(struct drm_encoder *encoder) +{ + const struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + + if (encoder->bridge) + encoder->bridge->funcs->disable(encoder->bridge); + + if (encoder_funcs->disable) + (*encoder_funcs->disable)(encoder); + else + (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); + + if (encoder->bridge) + encoder->bridge->funcs->post_disable(encoder->bridge); +} + +static void __drm_helper_disable_unused_functions(struct drm_device *dev) +{ + struct drm_encoder *encoder; + struct drm_crtc *crtc; + + drm_warn_on_modeset_not_all_locked(dev); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (!drm_helper_encoder_in_use(encoder)) { + drm_encoder_disable(encoder); + /* disconnect encoder from any connector */ + encoder->crtc = NULL; + } + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc->enabled = drm_helper_crtc_in_use(crtc); + if (!crtc->enabled) { + if (crtc_funcs->disable) + (*crtc_funcs->disable)(crtc); + else + (*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF); + crtc->primary->fb = NULL; + } + } +} + +/** + * drm_helper_disable_unused_functions - disable unused objects + * @dev: DRM device + * + * This function walks through the entire mode setting configuration of @dev. It + * will remove any crtc links of unused encoders and encoder links of + * disconnected connectors. Then it will disable all unused encoders and crtcs + * either by calling their disable callback if available or by calling their + * dpms callback with DRM_MODE_DPMS_OFF. + */ +void drm_helper_disable_unused_functions(struct drm_device *dev) +{ + drm_modeset_lock_all(dev); + __drm_helper_disable_unused_functions(dev); + drm_modeset_unlock_all(dev); +} +EXPORT_SYMBOL(drm_helper_disable_unused_functions); + +/* + * Check the CRTC we're going to map each output to vs. its current + * CRTC. If they don't match, we have to disable the output and the CRTC + * since the driver will have to re-route things. + */ +static void +drm_crtc_prepare_encoders(struct drm_device *dev) +{ + const struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_encoder *encoder; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + encoder_funcs = encoder->helper_private; + /* Disable unused encoders */ + if (encoder->crtc == NULL) + drm_encoder_disable(encoder); + /* Disable encoders whose CRTC is about to change */ + if (encoder_funcs->get_crtc && + encoder->crtc != (*encoder_funcs->get_crtc)(encoder)) + drm_encoder_disable(encoder); + } +} + +/** + * drm_crtc_helper_set_mode - internal helper to set a mode + * @crtc: CRTC to program + * @mode: mode to use + * @x: horizontal offset into the surface + * @y: vertical offset into the surface + * @old_fb: old framebuffer, for cleanup + * + * Try to set @mode on @crtc. Give @crtc and its associated connectors a chance + * to fixup or reject the mode prior to trying to set it. This is an internal + * helper that drivers could e.g. use to update properties that require the + * entire output pipe to be disabled and re-enabled in a new configuration. For + * example for changing whether audio is enabled on a hdmi link or for changing + * panel fitter or dither attributes. It is also called by the + * drm_crtc_helper_set_config() helper function to drive the mode setting + * sequence. + * + * Returns: + * True if the mode was set successfully, false otherwise. + */ +bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, + struct drm_display_mode *mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode; + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + const struct drm_encoder_helper_funcs *encoder_funcs; + int saved_x, saved_y; + bool saved_enabled; + struct drm_encoder *encoder; + bool ret = true; + + drm_warn_on_modeset_not_all_locked(dev); + + saved_enabled = crtc->enabled; + crtc->enabled = drm_helper_crtc_in_use(crtc); + if (!crtc->enabled) + return true; + + adjusted_mode = drm_mode_duplicate(dev, mode); + if (!adjusted_mode) { + crtc->enabled = saved_enabled; + return false; + } + + saved_mode = crtc->mode; + saved_hwmode = crtc->hwmode; + saved_x = crtc->x; + saved_y = crtc->y; + + /* Update crtc values up front so the driver can rely on them for mode + * setting. + */ + crtc->mode = *mode; + crtc->x = x; + crtc->y = y; + + /* Pass our mode to the connectors and the CRTC to give them a chance to + * adjust it according to limitations or connector properties, and also + * a chance to reject the mode entirely. + */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + + if (encoder->bridge && encoder->bridge->funcs->mode_fixup) { + ret = encoder->bridge->funcs->mode_fixup( + encoder->bridge, mode, adjusted_mode); + if (!ret) { + DRM_DEBUG_KMS("Bridge fixup failed\n"); + goto done; + } + } + + encoder_funcs = encoder->helper_private; + if (!(ret = encoder_funcs->mode_fixup(encoder, mode, + adjusted_mode))) { + DRM_DEBUG_KMS("Encoder fixup failed\n"); + goto done; + } + } + + if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) { + DRM_DEBUG_KMS("CRTC fixup failed\n"); + goto done; + } + DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id); + + crtc->hwmode = *adjusted_mode; + + /* Prepare the encoders and CRTCs before setting the mode. */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + + if (encoder->bridge) + encoder->bridge->funcs->disable(encoder->bridge); + + encoder_funcs = encoder->helper_private; + /* Disable the encoders as the first thing we do. */ + encoder_funcs->prepare(encoder); + + if (encoder->bridge) + encoder->bridge->funcs->post_disable(encoder->bridge); + } + + drm_crtc_prepare_encoders(dev); + + crtc_funcs->prepare(crtc); + + /* Set up the DPLL and any encoders state that needs to adjust or depend + * on the DPLL. + */ + ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + if (!ret) + goto done; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + + DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n", + encoder->base.id, encoder->name, + mode->base.id, mode->name); + encoder_funcs = encoder->helper_private; + encoder_funcs->mode_set(encoder, mode, adjusted_mode); + + if (encoder->bridge && encoder->bridge->funcs->mode_set) + encoder->bridge->funcs->mode_set(encoder->bridge, mode, + adjusted_mode); + } + + /* Now enable the clocks, plane, pipe, and connectors that we set up. */ + crtc_funcs->commit(crtc); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + + if (encoder->bridge) + encoder->bridge->funcs->pre_enable(encoder->bridge); + + encoder_funcs = encoder->helper_private; + encoder_funcs->commit(encoder); + + if (encoder->bridge) + encoder->bridge->funcs->enable(encoder->bridge); + } + + /* Calculate and store various constants which + * are later needed by vblank and swap-completion + * timestamping. They are derived from true hwmode. + */ + drm_calc_timestamping_constants(crtc, &crtc->hwmode); + + /* FIXME: add subpixel order */ +done: + drm_mode_destroy(dev, adjusted_mode); + if (!ret) { + crtc->enabled = saved_enabled; + crtc->mode = saved_mode; + crtc->hwmode = saved_hwmode; + crtc->x = saved_x; + crtc->y = saved_y; + } + + return ret; +} +EXPORT_SYMBOL(drm_crtc_helper_set_mode); + +static void +drm_crtc_helper_disable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_connector *connector; + struct drm_encoder *encoder; + + /* Decouple all encoders and their attached connectors from this crtc */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc != crtc) + continue; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->encoder != encoder) + continue; + + connector->encoder = NULL; + + /* + * drm_helper_disable_unused_functions() ought to be + * doing this, but since we've decoupled the encoder + * from the connector above, the required connection + * between them is henceforth no longer available. + */ + connector->dpms = DRM_MODE_DPMS_OFF; + } + } + + __drm_helper_disable_unused_functions(dev); +} + +/** + * drm_crtc_helper_set_config - set a new config from userspace + * @set: mode set configuration + * + * Setup a new configuration, provided by the upper layers (either an ioctl call + * from userspace or internally e.g. from the fbdev support code) in @set, and + * enable it. This is the main helper functions for drivers that implement + * kernel mode setting with the crtc helper functions and the assorted + * ->prepare(), ->modeset() and ->commit() helper callbacks. + * + * Returns: + * Returns 0 on success, negative errno numbers on failure. + */ +int drm_crtc_helper_set_config(struct drm_mode_set *set) +{ + struct drm_device *dev; + struct drm_crtc *new_crtc; + struct drm_encoder *save_encoders, *new_encoder, *encoder; + bool mode_changed = false; /* if true do a full mode set */ + bool fb_changed = false; /* if true and !mode_changed just do a flip */ + struct drm_connector *save_connectors, *connector; + int count = 0, ro, fail = 0; + const struct drm_crtc_helper_funcs *crtc_funcs; + struct drm_mode_set save_set; + int ret; + int i; + + DRM_DEBUG_KMS("\n"); + + BUG_ON(!set); + BUG_ON(!set->crtc); + BUG_ON(!set->crtc->helper_private); + + /* Enforce sane interface api - has been abused by the fb helper. */ + BUG_ON(!set->mode && set->fb); + BUG_ON(set->fb && set->num_connectors == 0); + + crtc_funcs = set->crtc->helper_private; + + if (!set->mode) + set->fb = NULL; + + if (set->fb) { + DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n", + set->crtc->base.id, set->fb->base.id, + (int)set->num_connectors, set->x, set->y); + } else { + DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); + drm_crtc_helper_disable(set->crtc); + return 0; + } + + dev = set->crtc->dev; + + drm_warn_on_modeset_not_all_locked(dev); + + /* + * Allocate space for the backup of all (non-pointer) encoder and + * connector data. + */ + save_encoders = kzalloc(dev->mode_config.num_encoder * + sizeof(struct drm_encoder), GFP_KERNEL); + if (!save_encoders) + return -ENOMEM; + + save_connectors = kzalloc(dev->mode_config.num_connector * + sizeof(struct drm_connector), GFP_KERNEL); + if (!save_connectors) { + kfree(save_encoders); + return -ENOMEM; + } + + /* + * Copy data. Note that driver private data is not affected. + * Should anything bad happen only the expected state is + * restored, not the drivers personal bookkeeping. + */ + count = 0; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + save_encoders[count++] = *encoder; + } + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + save_connectors[count++] = *connector; + } + + save_set.crtc = set->crtc; + save_set.mode = &set->crtc->mode; + save_set.x = set->crtc->x; + save_set.y = set->crtc->y; + save_set.fb = set->crtc->primary->fb; + + /* We should be able to check here if the fb has the same properties + * and then just flip_or_move it */ + if (set->crtc->primary->fb != set->fb) { + /* If we have no fb then treat it as a full mode set */ + if (set->crtc->primary->fb == NULL) { + DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); + mode_changed = true; + } else if (set->fb == NULL) { + mode_changed = true; + } else if (set->fb->pixel_format != + set->crtc->primary->fb->pixel_format) { + mode_changed = true; + } else + fb_changed = true; + } + + if (set->x != set->crtc->x || set->y != set->crtc->y) + fb_changed = true; + + if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { + DRM_DEBUG_KMS("modes are different, full mode set\n"); + drm_mode_debug_printmodeline(&set->crtc->mode); + drm_mode_debug_printmodeline(set->mode); + mode_changed = true; + } + + /* a) traverse passed in connector list and get encoders for them */ + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + const struct drm_connector_helper_funcs *connector_funcs = + connector->helper_private; + new_encoder = connector->encoder; + for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro] == connector) { + new_encoder = connector_funcs->best_encoder(connector); + /* if we can't get an encoder for a connector + we are setting now - then fail */ + if (new_encoder == NULL) + /* don't break so fail path works correct */ + fail = 1; + + if (connector->dpms != DRM_MODE_DPMS_ON) { + DRM_DEBUG_KMS("connector dpms not on, full mode switch\n"); + mode_changed = true; + } + + break; + } + } + + if (new_encoder != connector->encoder) { + DRM_DEBUG_KMS("encoder changed, full mode switch\n"); + mode_changed = true; + /* If the encoder is reused for another connector, then + * the appropriate crtc will be set later. + */ + if (connector->encoder) + connector->encoder->crtc = NULL; + connector->encoder = new_encoder; + } + } + + if (fail) { + ret = -EINVAL; + goto fail; + } + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder) + continue; + + if (connector->encoder->crtc == set->crtc) + new_crtc = NULL; + else + new_crtc = connector->encoder->crtc; + + for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro] == connector) + new_crtc = set->crtc; + } + + /* Make sure the new CRTC will work with the encoder */ + if (new_crtc && + !drm_encoder_crtc_ok(connector->encoder, new_crtc)) { + ret = -EINVAL; + goto fail; + } + if (new_crtc != connector->encoder->crtc) { + DRM_DEBUG_KMS("crtc changed, full mode switch\n"); + mode_changed = true; + connector->encoder->crtc = new_crtc; + } + if (new_crtc) { + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n", + connector->base.id, connector->name, + new_crtc->base.id); + } else { + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n", + connector->base.id, connector->name); + } + } + + /* mode_set_base is not a required function */ + if (fb_changed && !crtc_funcs->mode_set_base) + mode_changed = true; + + if (mode_changed) { + if (drm_helper_crtc_in_use(set->crtc)) { + DRM_DEBUG_KMS("attempting to set mode from" + " userspace\n"); + drm_mode_debug_printmodeline(set->mode); + set->crtc->primary->fb = set->fb; + if (!drm_crtc_helper_set_mode(set->crtc, set->mode, + set->x, set->y, + save_set.fb)) { + DRM_ERROR("failed to set mode on [CRTC:%d]\n", + set->crtc->base.id); + set->crtc->primary->fb = save_set.fb; + ret = -EINVAL; + goto fail; + } + DRM_DEBUG_KMS("Setting connector DPMS state to on\n"); + for (i = 0; i < set->num_connectors; i++) { + DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id, + set->connectors[i]->name); + set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON); + } + } + __drm_helper_disable_unused_functions(dev); + } else if (fb_changed) { + set->crtc->x = set->x; + set->crtc->y = set->y; + set->crtc->primary->fb = set->fb; + ret = crtc_funcs->mode_set_base(set->crtc, + set->x, set->y, save_set.fb); + if (ret != 0) { + set->crtc->x = save_set.x; + set->crtc->y = save_set.y; + set->crtc->primary->fb = save_set.fb; + goto fail; + } + } + + kfree(save_connectors); + kfree(save_encoders); + return 0; + +fail: + /* Restore all previous data. */ + count = 0; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + *encoder = save_encoders[count++]; + } + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + *connector = save_connectors[count++]; + } + + /* Try to restore the config */ + if (mode_changed && + !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x, + save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + + kfree(save_connectors); + kfree(save_encoders); + return ret; +} +EXPORT_SYMBOL(drm_crtc_helper_set_config); + +static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder) +{ + int dpms = DRM_MODE_DPMS_OFF; + struct drm_connector *connector; + struct drm_device *dev = encoder->dev; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder == encoder) + if (connector->dpms < dpms) + dpms = connector->dpms; + return dpms; +} + +/* Helper which handles bridge ordering around encoder dpms */ +static void drm_helper_encoder_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_bridge *bridge = encoder->bridge; + const struct drm_encoder_helper_funcs *encoder_funcs; + + if (bridge) { + if (mode == DRM_MODE_DPMS_ON) + bridge->funcs->pre_enable(bridge); + else + bridge->funcs->disable(bridge); + } + + encoder_funcs = encoder->helper_private; + if (encoder_funcs->dpms) + encoder_funcs->dpms(encoder, mode); + + if (bridge) { + if (mode == DRM_MODE_DPMS_ON) + bridge->funcs->enable(bridge); + else + bridge->funcs->post_disable(bridge); + } +} + +static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc) +{ + int dpms = DRM_MODE_DPMS_OFF; + struct drm_connector *connector; + struct drm_device *dev = crtc->dev; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder && connector->encoder->crtc == crtc) + if (connector->dpms < dpms) + dpms = connector->dpms; + return dpms; +} + +/** + * drm_helper_connector_dpms() - connector dpms helper implementation + * @connector: affected connector + * @mode: DPMS mode + * + * This is the main helper function provided by the crtc helper framework for + * implementing the DPMS connector attribute. It computes the new desired DPMS + * state for all encoders and crtcs in the output mesh and calls the ->dpms() + * callback provided by the driver appropriately. + */ +void drm_helper_connector_dpms(struct drm_connector *connector, int mode) +{ + struct drm_encoder *encoder = connector->encoder; + struct drm_crtc *crtc = encoder ? encoder->crtc : NULL; + int old_dpms, encoder_dpms = DRM_MODE_DPMS_OFF; + + if (mode == connector->dpms) + return; + + old_dpms = connector->dpms; + connector->dpms = mode; + + if (encoder) + encoder_dpms = drm_helper_choose_encoder_dpms(encoder); + + /* from off to on, do crtc then encoder */ + if (mode < old_dpms) { + if (crtc) { + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + if (encoder) + drm_helper_encoder_dpms(encoder, encoder_dpms); + } + + /* from on to off, do encoder then crtc */ + if (mode > old_dpms) { + if (encoder) + drm_helper_encoder_dpms(encoder, encoder_dpms); + if (crtc) { + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + } + + return; +} +EXPORT_SYMBOL(drm_helper_connector_dpms); + +/** + * drm_helper_mode_fill_fb_struct - fill out framebuffer metadata + * @fb: drm_framebuffer object to fill out + * @mode_cmd: metadata from the userspace fb creation request + * + * This helper can be used in a drivers fb_create callback to pre-fill the fb's + * metadata fields. + */ +void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb, + struct drm_mode_fb_cmd2 *mode_cmd) +{ + int i; + + fb->width = mode_cmd->width; + fb->height = mode_cmd->height; + for (i = 0; i < 4; i++) { + fb->pitches[i] = mode_cmd->pitches[i]; + fb->offsets[i] = mode_cmd->offsets[i]; + fb->modifier[i] = mode_cmd->modifier[i]; + } + drm_fb_get_bpp_depth(mode_cmd->pixel_format, &fb->depth, + &fb->bits_per_pixel); + fb->pixel_format = mode_cmd->pixel_format; + fb->flags = mode_cmd->flags; +} +EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct); + +/** + * drm_helper_resume_force_mode - force-restore mode setting configuration + * @dev: drm_device which should be restored + * + * Drivers which use the mode setting helpers can use this function to + * force-restore the mode setting configuration e.g. on resume or when something + * else might have trampled over the hw state (like some overzealous old BIOSen + * tended to do). + * + * This helper doesn't provide a error return value since restoring the old + * config should never fail due to resource allocation issues since the driver + * has successfully set the restored configuration already. Hence this should + * boil down to the equivalent of a few dpms on calls, which also don't provide + * an error code. + * + * Drivers where simply restoring an old configuration again might fail (e.g. + * due to slight differences in allocating shared resources when the + * configuration is restored in a different order than when userspace set it up) + * need to use their own restore logic. + */ +void drm_helper_resume_force_mode(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct drm_encoder *encoder; + const struct drm_crtc_helper_funcs *crtc_funcs; + int encoder_dpms; + bool ret; + + drm_modeset_lock_all(dev); + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + + if (!crtc->enabled) + continue; + + ret = drm_crtc_helper_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->primary->fb); + + /* Restoring the old config should never fail! */ + if (ret == false) + DRM_ERROR("failed to set mode on crtc %p\n", crtc); + + /* Turn off outputs that were already powered off */ + if (drm_helper_choose_crtc_dpms(crtc)) { + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if(encoder->crtc != crtc) + continue; + + encoder_dpms = drm_helper_choose_encoder_dpms( + encoder); + + drm_helper_encoder_dpms(encoder, encoder_dpms); + } + + crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + } + + /* disable the unused connectors while restoring the modesetting */ + __drm_helper_disable_unused_functions(dev); + drm_modeset_unlock_all(dev); +} +EXPORT_SYMBOL(drm_helper_resume_force_mode); + +/** + * drm_helper_crtc_mode_set - mode_set implementation for atomic plane helpers + * @crtc: DRM CRTC + * @mode: DRM display mode which userspace requested + * @adjusted_mode: DRM display mode adjusted by ->mode_fixup callbacks + * @x: x offset of the CRTC scanout area on the underlying framebuffer + * @y: y offset of the CRTC scanout area on the underlying framebuffer + * @old_fb: previous framebuffer + * + * This function implements a callback useable as the ->mode_set callback + * required by the crtc helpers. Besides the atomic plane helper functions for + * the primary plane the driver must also provide the ->mode_set_nofb callback + * to set up the crtc. + * + * This is a transitional helper useful for converting drivers to the atomic + * interfaces. + */ +int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_crtc_state *crtc_state; + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + int ret; + + if (crtc->funcs->atomic_duplicate_state) + crtc_state = crtc->funcs->atomic_duplicate_state(crtc); + else if (crtc->state) + crtc_state = kmemdup(crtc->state, sizeof(*crtc_state), + GFP_KERNEL); + else + crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL); + if (!crtc_state) + return -ENOMEM; + crtc_state->crtc = crtc; + + crtc_state->enable = true; + crtc_state->planes_changed = true; + crtc_state->mode_changed = true; + drm_mode_copy(&crtc_state->mode, mode); + drm_mode_copy(&crtc_state->adjusted_mode, adjusted_mode); + + if (crtc_funcs->atomic_check) { + ret = crtc_funcs->atomic_check(crtc, crtc_state); + if (ret) { + kfree(crtc_state); + + return ret; + } + } + + swap(crtc->state, crtc_state); + + crtc_funcs->mode_set_nofb(crtc); + + if (crtc_state) { + if (crtc->funcs->atomic_destroy_state) + crtc->funcs->atomic_destroy_state(crtc, crtc_state); + else + kfree(crtc_state); + } + + return drm_helper_crtc_mode_set_base(crtc, x, y, old_fb); +} +EXPORT_SYMBOL(drm_helper_crtc_mode_set); + +/** + * drm_helper_crtc_mode_set_base - mode_set_base implementation for atomic plane helpers + * @crtc: DRM CRTC + * @x: x offset of the CRTC scanout area on the underlying framebuffer + * @y: y offset of the CRTC scanout area on the underlying framebuffer + * @old_fb: previous framebuffer + * + * This function implements a callback useable as the ->mode_set_base used + * required by the crtc helpers. The driver must provide the atomic plane helper + * functions for the primary plane. + * + * This is a transitional helper useful for converting drivers to the atomic + * interfaces. + */ +int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_plane_state *plane_state; + struct drm_plane *plane = crtc->primary; + + if (plane->funcs->atomic_duplicate_state) + plane_state = plane->funcs->atomic_duplicate_state(plane); + else if (plane->state) + plane_state = drm_atomic_helper_plane_duplicate_state(plane); + else + plane_state = kzalloc(sizeof(*plane_state), GFP_KERNEL); + if (!plane_state) + return -ENOMEM; + plane_state->plane = plane; + + plane_state->crtc = crtc; + drm_atomic_set_fb_for_plane(plane_state, crtc->primary->fb); + plane_state->crtc_x = 0; + plane_state->crtc_y = 0; + plane_state->crtc_h = crtc->mode.vdisplay; + plane_state->crtc_w = crtc->mode.hdisplay; + plane_state->src_x = x << 16; + plane_state->src_y = y << 16; + plane_state->src_h = crtc->mode.vdisplay << 16; + plane_state->src_w = crtc->mode.hdisplay << 16; + + return drm_plane_helper_commit(plane, plane_state, old_fb); +} +EXPORT_SYMBOL(drm_helper_crtc_mode_set_base); |