diff options
Diffstat (limited to 'kernel/drivers/gpio/gpio-sx150x.c')
| -rw-r--r-- | kernel/drivers/gpio/gpio-sx150x.c | 709 |
1 files changed, 709 insertions, 0 deletions
diff --git a/kernel/drivers/gpio/gpio-sx150x.c b/kernel/drivers/gpio/gpio-sx150x.c new file mode 100644 index 000000000..458d9d795 --- /dev/null +++ b/kernel/drivers/gpio/gpio-sx150x.c @@ -0,0 +1,709 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/i2c/sx150x.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> + +#define NO_UPDATE_PENDING -1 + +/* The chip models of sx150x */ +#define SX150X_456 0 +#define SX150X_789 1 + +struct sx150x_456_pri { + u8 reg_pld_mode; + u8 reg_pld_table0; + u8 reg_pld_table1; + u8 reg_pld_table2; + u8 reg_pld_table3; + u8 reg_pld_table4; + u8 reg_advance; +}; + +struct sx150x_789_pri { + u8 reg_drain; + u8 reg_polarity; + u8 reg_clock; + u8 reg_misc; + u8 reg_reset; + u8 ngpios; +}; + +struct sx150x_device_data { + u8 model; + u8 reg_pullup; + u8 reg_pulldn; + u8 reg_dir; + u8 reg_data; + u8 reg_irq_mask; + u8 reg_irq_src; + u8 reg_sense; + u8 ngpios; + union { + struct sx150x_456_pri x456; + struct sx150x_789_pri x789; + } pri; +}; + +struct sx150x_chip { + struct gpio_chip gpio_chip; + struct i2c_client *client; + const struct sx150x_device_data *dev_cfg; + int irq_summary; + int irq_base; + int irq_update; + u32 irq_sense; + u32 irq_masked; + u32 dev_sense; + u32 dev_masked; + struct irq_chip irq_chip; + struct mutex lock; +}; + +static const struct sx150x_device_data sx150x_devices[] = { + [0] = { /* sx1508q */ + .model = SX150X_789, + .reg_pullup = 0x03, + .reg_pulldn = 0x04, + .reg_dir = 0x07, + .reg_data = 0x08, + .reg_irq_mask = 0x09, + .reg_irq_src = 0x0c, + .reg_sense = 0x0b, + .pri.x789 = { + .reg_drain = 0x05, + .reg_polarity = 0x06, + .reg_clock = 0x0f, + .reg_misc = 0x10, + .reg_reset = 0x7d, + }, + .ngpios = 8, + }, + [1] = { /* sx1509q */ + .model = SX150X_789, + .reg_pullup = 0x07, + .reg_pulldn = 0x09, + .reg_dir = 0x0f, + .reg_data = 0x11, + .reg_irq_mask = 0x13, + .reg_irq_src = 0x19, + .reg_sense = 0x17, + .pri.x789 = { + .reg_drain = 0x0b, + .reg_polarity = 0x0d, + .reg_clock = 0x1e, + .reg_misc = 0x1f, + .reg_reset = 0x7d, + }, + .ngpios = 16 + }, + [2] = { /* sx1506q */ + .model = SX150X_456, + .reg_pullup = 0x05, + .reg_pulldn = 0x07, + .reg_dir = 0x03, + .reg_data = 0x01, + .reg_irq_mask = 0x09, + .reg_irq_src = 0x0f, + .reg_sense = 0x0d, + .pri.x456 = { + .reg_pld_mode = 0x21, + .reg_pld_table0 = 0x23, + .reg_pld_table1 = 0x25, + .reg_pld_table2 = 0x27, + .reg_pld_table3 = 0x29, + .reg_pld_table4 = 0x2b, + .reg_advance = 0xad, + }, + .ngpios = 16 + }, +}; + +static const struct i2c_device_id sx150x_id[] = { + {"sx1508q", 0}, + {"sx1509q", 1}, + {"sx1506q", 2}, + {} +}; +MODULE_DEVICE_TABLE(i2c, sx150x_id); + +static const struct of_device_id sx150x_of_match[] = { + { .compatible = "semtech,sx1508q" }, + { .compatible = "semtech,sx1509q" }, + { .compatible = "semtech,sx1506q" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sx150x_of_match); + +static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val) +{ + s32 err = i2c_smbus_write_byte_data(client, reg, val); + + if (err < 0) + dev_warn(&client->dev, + "i2c write fail: can't write %02x to %02x: %d\n", + val, reg, err); + return err; +} + +static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val) +{ + s32 err = i2c_smbus_read_byte_data(client, reg); + + if (err >= 0) + *val = err; + else + dev_warn(&client->dev, + "i2c read fail: can't read from %02x: %d\n", + reg, err); + return err; +} + +static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset) +{ + return (chip->dev_cfg->ngpios == offset); +} + +/* + * These utility functions solve the common problem of locating and setting + * configuration bits. Configuration bits are grouped into registers + * whose indexes increase downwards. For example, with eight-bit registers, + * sixteen gpios would have their config bits grouped in the following order: + * REGISTER N-1 [ f e d c b a 9 8 ] + * N [ 7 6 5 4 3 2 1 0 ] + * + * For multi-bit configurations, the pattern gets wider: + * REGISTER N-3 [ f f e e d d c c ] + * N-2 [ b b a a 9 9 8 8 ] + * N-1 [ 7 7 6 6 5 5 4 4 ] + * N [ 3 3 2 2 1 1 0 0 ] + * + * Given the address of the starting register 'N', the index of the gpio + * whose configuration we seek to change, and the width in bits of that + * configuration, these functions allow us to locate the correct + * register and mask the correct bits. + */ +static inline void sx150x_find_cfg(u8 offset, u8 width, + u8 *reg, u8 *mask, u8 *shift) +{ + *reg -= offset * width / 8; + *mask = (1 << width) - 1; + *shift = (offset * width) % 8; + *mask <<= *shift; +} + +static s32 sx150x_write_cfg(struct sx150x_chip *chip, + u8 offset, u8 width, u8 reg, u8 val) +{ + u8 mask; + u8 data; + u8 shift; + s32 err; + + sx150x_find_cfg(offset, width, ®, &mask, &shift); + err = sx150x_i2c_read(chip->client, reg, &data); + if (err < 0) + return err; + + data &= ~mask; + data |= (val << shift) & mask; + return sx150x_i2c_write(chip->client, reg, data); +} + +static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset) +{ + u8 reg = chip->dev_cfg->reg_data; + u8 mask; + u8 data; + u8 shift; + s32 err; + + sx150x_find_cfg(offset, 1, ®, &mask, &shift); + err = sx150x_i2c_read(chip->client, reg, &data); + if (err >= 0) + err = (data & mask) != 0 ? 1 : 0; + + return err; +} + +static void sx150x_set_oscio(struct sx150x_chip *chip, int val) +{ + sx150x_i2c_write(chip->client, + chip->dev_cfg->pri.x789.reg_clock, + (val ? 0x1f : 0x10)); +} + +static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val) +{ + sx150x_write_cfg(chip, + offset, + 1, + chip->dev_cfg->reg_data, + (val ? 1 : 0)); +} + +static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset) +{ + return sx150x_write_cfg(chip, + offset, + 1, + chip->dev_cfg->reg_dir, + 1); +} + +static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val) +{ + int err; + + err = sx150x_write_cfg(chip, + offset, + 1, + chip->dev_cfg->reg_data, + (val ? 1 : 0)); + if (err >= 0) + err = sx150x_write_cfg(chip, + offset, + 1, + chip->dev_cfg->reg_dir, + 0); + return err; +} + +static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct sx150x_chip *chip; + int status = -EINVAL; + + chip = container_of(gc, struct sx150x_chip, gpio_chip); + + if (!offset_is_oscio(chip, offset)) { + mutex_lock(&chip->lock); + status = sx150x_get_io(chip, offset); + mutex_unlock(&chip->lock); + } + + return status; +} + +static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val) +{ + struct sx150x_chip *chip; + + chip = container_of(gc, struct sx150x_chip, gpio_chip); + + mutex_lock(&chip->lock); + if (offset_is_oscio(chip, offset)) + sx150x_set_oscio(chip, val); + else + sx150x_set_io(chip, offset, val); + mutex_unlock(&chip->lock); +} + +static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct sx150x_chip *chip; + int status = -EINVAL; + + chip = container_of(gc, struct sx150x_chip, gpio_chip); + + if (!offset_is_oscio(chip, offset)) { + mutex_lock(&chip->lock); + status = sx150x_io_input(chip, offset); + mutex_unlock(&chip->lock); + } + return status; +} + +static int sx150x_gpio_direction_output(struct gpio_chip *gc, + unsigned offset, + int val) +{ + struct sx150x_chip *chip; + int status = 0; + + chip = container_of(gc, struct sx150x_chip, gpio_chip); + + if (!offset_is_oscio(chip, offset)) { + mutex_lock(&chip->lock); + status = sx150x_io_output(chip, offset, val); + mutex_unlock(&chip->lock); + } + return status; +} + +static void sx150x_irq_mask(struct irq_data *d) +{ + struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); + unsigned n = d->hwirq; + + chip->irq_masked |= (1 << n); + chip->irq_update = n; +} + +static void sx150x_irq_unmask(struct irq_data *d) +{ + struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); + unsigned n = d->hwirq; + + chip->irq_masked &= ~(1 << n); + chip->irq_update = n; +} + +static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type) +{ + struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); + unsigned n, val = 0; + + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + return -EINVAL; + + n = d->hwirq; + + if (flow_type & IRQ_TYPE_EDGE_RISING) + val |= 0x1; + if (flow_type & IRQ_TYPE_EDGE_FALLING) + val |= 0x2; + + chip->irq_sense &= ~(3UL << (n * 2)); + chip->irq_sense |= val << (n * 2); + chip->irq_update = n; + return 0; +} + +static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id) +{ + struct sx150x_chip *chip = (struct sx150x_chip *)dev_id; + unsigned nhandled = 0; + unsigned sub_irq; + unsigned n; + s32 err; + u8 val; + int i; + + for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) { + err = sx150x_i2c_read(chip->client, + chip->dev_cfg->reg_irq_src - i, + &val); + if (err < 0) + continue; + + sx150x_i2c_write(chip->client, + chip->dev_cfg->reg_irq_src - i, + val); + for (n = 0; n < 8; ++n) { + if (val & (1 << n)) { + sub_irq = irq_find_mapping( + chip->gpio_chip.irqdomain, + (i * 8) + n); + handle_nested_irq(sub_irq); + ++nhandled; + } + } + } + + return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); +} + +static void sx150x_irq_bus_lock(struct irq_data *d) +{ + struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); + + mutex_lock(&chip->lock); +} + +static void sx150x_irq_bus_sync_unlock(struct irq_data *d) +{ + struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); + unsigned n; + + if (chip->irq_update == NO_UPDATE_PENDING) + goto out; + + n = chip->irq_update; + chip->irq_update = NO_UPDATE_PENDING; + + /* Avoid updates if nothing changed */ + if (chip->dev_sense == chip->irq_sense && + chip->dev_masked == chip->irq_masked) + goto out; + + chip->dev_sense = chip->irq_sense; + chip->dev_masked = chip->irq_masked; + + if (chip->irq_masked & (1 << n)) { + sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1); + sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0); + } else { + sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0); + sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, + chip->irq_sense >> (n * 2)); + } +out: + mutex_unlock(&chip->lock); +} + +static void sx150x_init_chip(struct sx150x_chip *chip, + struct i2c_client *client, + kernel_ulong_t driver_data, + struct sx150x_platform_data *pdata) +{ + mutex_init(&chip->lock); + + chip->client = client; + chip->dev_cfg = &sx150x_devices[driver_data]; + chip->gpio_chip.dev = &client->dev; + chip->gpio_chip.label = client->name; + chip->gpio_chip.direction_input = sx150x_gpio_direction_input; + chip->gpio_chip.direction_output = sx150x_gpio_direction_output; + chip->gpio_chip.get = sx150x_gpio_get; + chip->gpio_chip.set = sx150x_gpio_set; + chip->gpio_chip.base = pdata->gpio_base; + chip->gpio_chip.can_sleep = true; + chip->gpio_chip.ngpio = chip->dev_cfg->ngpios; +#ifdef CONFIG_OF_GPIO + chip->gpio_chip.of_node = client->dev.of_node; + chip->gpio_chip.of_gpio_n_cells = 2; +#endif + if (pdata->oscio_is_gpo) + ++chip->gpio_chip.ngpio; + + chip->irq_chip.name = client->name; + chip->irq_chip.irq_mask = sx150x_irq_mask; + chip->irq_chip.irq_unmask = sx150x_irq_unmask; + chip->irq_chip.irq_set_type = sx150x_irq_set_type; + chip->irq_chip.irq_bus_lock = sx150x_irq_bus_lock; + chip->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock; + chip->irq_summary = -1; + chip->irq_base = -1; + chip->irq_masked = ~0; + chip->irq_sense = 0; + chip->dev_masked = ~0; + chip->dev_sense = 0; + chip->irq_update = NO_UPDATE_PENDING; +} + +static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg) +{ + int err = 0; + unsigned n; + + for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n) + err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8)); + return err; +} + +static int sx150x_reset(struct sx150x_chip *chip) +{ + int err; + + err = i2c_smbus_write_byte_data(chip->client, + chip->dev_cfg->pri.x789.reg_reset, + 0x12); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(chip->client, + chip->dev_cfg->pri.x789.reg_reset, + 0x34); + return err; +} + +static int sx150x_init_hw(struct sx150x_chip *chip, + struct sx150x_platform_data *pdata) +{ + int err = 0; + + if (pdata->reset_during_probe) { + err = sx150x_reset(chip); + if (err < 0) + return err; + } + + if (chip->dev_cfg->model == SX150X_789) + err = sx150x_i2c_write(chip->client, + chip->dev_cfg->pri.x789.reg_misc, + 0x01); + else + err = sx150x_i2c_write(chip->client, + chip->dev_cfg->pri.x456.reg_advance, + 0x04); + if (err < 0) + return err; + + err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup, + pdata->io_pullup_ena); + if (err < 0) + return err; + + err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn, + pdata->io_pulldn_ena); + if (err < 0) + return err; + + if (chip->dev_cfg->model == SX150X_789) { + err = sx150x_init_io(chip, + chip->dev_cfg->pri.x789.reg_drain, + pdata->io_open_drain_ena); + if (err < 0) + return err; + + err = sx150x_init_io(chip, + chip->dev_cfg->pri.x789.reg_polarity, + pdata->io_polarity); + if (err < 0) + return err; + } else { + /* Set all pins to work in normal mode */ + err = sx150x_init_io(chip, + chip->dev_cfg->pri.x456.reg_pld_mode, + 0); + if (err < 0) + return err; + } + + + if (pdata->oscio_is_gpo) + sx150x_set_oscio(chip, 0); + + return err; +} + +static int sx150x_install_irq_chip(struct sx150x_chip *chip, + int irq_summary, + int irq_base) +{ + int err; + + chip->irq_summary = irq_summary; + chip->irq_base = irq_base; + + /* Add gpio chip to irq subsystem */ + err = gpiochip_irqchip_add(&chip->gpio_chip, + &chip->irq_chip, chip->irq_base, + handle_edge_irq, IRQ_TYPE_EDGE_BOTH); + if (err) { + dev_err(&chip->client->dev, + "could not connect irqchip to gpiochip\n"); + return err; + } + + err = devm_request_threaded_irq(&chip->client->dev, + irq_summary, NULL, sx150x_irq_thread_fn, + IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_FALLING, + chip->irq_chip.name, chip); + if (err < 0) { + chip->irq_summary = -1; + chip->irq_base = -1; + } + + return err; +} + +static int sx150x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_WORD_DATA; + struct sx150x_platform_data *pdata; + struct sx150x_chip *chip; + int rc; + + pdata = dev_get_platdata(&client->dev); + if (!pdata) + return -EINVAL; + + if (!i2c_check_functionality(client->adapter, i2c_funcs)) + return -ENOSYS; + + chip = devm_kzalloc(&client->dev, + sizeof(struct sx150x_chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + sx150x_init_chip(chip, client, id->driver_data, pdata); + rc = sx150x_init_hw(chip, pdata); + if (rc < 0) + return rc; + + rc = gpiochip_add(&chip->gpio_chip); + if (rc) + return rc; + + if (pdata->irq_summary >= 0) { + rc = sx150x_install_irq_chip(chip, + pdata->irq_summary, + pdata->irq_base); + if (rc < 0) + goto probe_fail_post_gpiochip_add; + } + + i2c_set_clientdata(client, chip); + + return 0; +probe_fail_post_gpiochip_add: + gpiochip_remove(&chip->gpio_chip); + return rc; +} + +static int sx150x_remove(struct i2c_client *client) +{ + struct sx150x_chip *chip; + + chip = i2c_get_clientdata(client); + gpiochip_remove(&chip->gpio_chip); + + return 0; +} + +static struct i2c_driver sx150x_driver = { + .driver = { + .name = "sx150x", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sx150x_of_match), + }, + .probe = sx150x_probe, + .remove = sx150x_remove, + .id_table = sx150x_id, +}; + +static int __init sx150x_init(void) +{ + return i2c_add_driver(&sx150x_driver); +} +subsys_initcall(sx150x_init); + +static void __exit sx150x_exit(void) +{ + return i2c_del_driver(&sx150x_driver); +} +module_exit(sx150x_exit); + +MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>"); +MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("i2c:sx150x"); |