summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/gpio/gpio-omap.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/gpio/gpio-omap.c')
-rw-r--r--kernel/drivers/gpio/gpio-omap.c1617
1 files changed, 1617 insertions, 0 deletions
diff --git a/kernel/drivers/gpio/gpio-omap.c b/kernel/drivers/gpio/gpio-omap.c
new file mode 100644
index 000000000..a0ace2758
--- /dev/null
+++ b/kernel/drivers/gpio/gpio-omap.c
@@ -0,0 +1,1617 @@
+/*
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/syscore_ops.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/gpio.h>
+#include <linux/bitops.h>
+#include <linux/platform_data/gpio-omap.h>
+
+#define OFF_MODE 1
+
+static LIST_HEAD(omap_gpio_list);
+
+struct gpio_regs {
+ u32 irqenable1;
+ u32 irqenable2;
+ u32 wake_en;
+ u32 ctrl;
+ u32 oe;
+ u32 leveldetect0;
+ u32 leveldetect1;
+ u32 risingdetect;
+ u32 fallingdetect;
+ u32 dataout;
+ u32 debounce;
+ u32 debounce_en;
+};
+
+struct gpio_bank {
+ struct list_head node;
+ void __iomem *base;
+ u16 irq;
+ u32 non_wakeup_gpios;
+ u32 enabled_non_wakeup_gpios;
+ struct gpio_regs context;
+ u32 saved_datain;
+ u32 level_mask;
+ u32 toggle_mask;
+ raw_spinlock_t lock;
+ struct gpio_chip chip;
+ struct clk *dbck;
+ u32 mod_usage;
+ u32 irq_usage;
+ u32 dbck_enable_mask;
+ bool dbck_enabled;
+ struct device *dev;
+ bool is_mpuio;
+ bool dbck_flag;
+ bool loses_context;
+ bool context_valid;
+ int stride;
+ u32 width;
+ int context_loss_count;
+ int power_mode;
+ bool workaround_enabled;
+
+ void (*set_dataout)(struct gpio_bank *bank, unsigned gpio, int enable);
+ int (*get_context_loss_count)(struct device *dev);
+
+ struct omap_gpio_reg_offs *regs;
+};
+
+#define GPIO_MOD_CTRL_BIT BIT(0)
+
+#define BANK_USED(bank) (bank->mod_usage || bank->irq_usage)
+#define LINE_USED(line, offset) (line & (BIT(offset)))
+
+static void omap_gpio_unmask_irq(struct irq_data *d);
+
+static inline struct gpio_bank *omap_irq_data_get_bank(struct irq_data *d)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+ return container_of(chip, struct gpio_bank, chip);
+}
+
+static void omap_set_gpio_direction(struct gpio_bank *bank, int gpio,
+ int is_input)
+{
+ void __iomem *reg = bank->base;
+ u32 l;
+
+ reg += bank->regs->direction;
+ l = readl_relaxed(reg);
+ if (is_input)
+ l |= BIT(gpio);
+ else
+ l &= ~(BIT(gpio));
+ writel_relaxed(l, reg);
+ bank->context.oe = l;
+}
+
+
+/* set data out value using dedicate set/clear register */
+static void omap_set_gpio_dataout_reg(struct gpio_bank *bank, unsigned offset,
+ int enable)
+{
+ void __iomem *reg = bank->base;
+ u32 l = BIT(offset);
+
+ if (enable) {
+ reg += bank->regs->set_dataout;
+ bank->context.dataout |= l;
+ } else {
+ reg += bank->regs->clr_dataout;
+ bank->context.dataout &= ~l;
+ }
+
+ writel_relaxed(l, reg);
+}
+
+/* set data out value using mask register */
+static void omap_set_gpio_dataout_mask(struct gpio_bank *bank, unsigned offset,
+ int enable)
+{
+ void __iomem *reg = bank->base + bank->regs->dataout;
+ u32 gpio_bit = BIT(offset);
+ u32 l;
+
+ l = readl_relaxed(reg);
+ if (enable)
+ l |= gpio_bit;
+ else
+ l &= ~gpio_bit;
+ writel_relaxed(l, reg);
+ bank->context.dataout = l;
+}
+
+static int omap_get_gpio_datain(struct gpio_bank *bank, int offset)
+{
+ void __iomem *reg = bank->base + bank->regs->datain;
+
+ return (readl_relaxed(reg) & (BIT(offset))) != 0;
+}
+
+static int omap_get_gpio_dataout(struct gpio_bank *bank, int offset)
+{
+ void __iomem *reg = bank->base + bank->regs->dataout;
+
+ return (readl_relaxed(reg) & (BIT(offset))) != 0;
+}
+
+static inline void omap_gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
+{
+ int l = readl_relaxed(base + reg);
+
+ if (set)
+ l |= mask;
+ else
+ l &= ~mask;
+
+ writel_relaxed(l, base + reg);
+}
+
+static inline void omap_gpio_dbck_enable(struct gpio_bank *bank)
+{
+ if (bank->dbck_enable_mask && !bank->dbck_enabled) {
+ clk_prepare_enable(bank->dbck);
+ bank->dbck_enabled = true;
+
+ writel_relaxed(bank->dbck_enable_mask,
+ bank->base + bank->regs->debounce_en);
+ }
+}
+
+static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
+{
+ if (bank->dbck_enable_mask && bank->dbck_enabled) {
+ /*
+ * Disable debounce before cutting it's clock. If debounce is
+ * enabled but the clock is not, GPIO module seems to be unable
+ * to detect events and generate interrupts at least on OMAP3.
+ */
+ writel_relaxed(0, bank->base + bank->regs->debounce_en);
+
+ clk_disable_unprepare(bank->dbck);
+ bank->dbck_enabled = false;
+ }
+}
+
+/**
+ * omap2_set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @offset: the gpio number on this @bank
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
+ unsigned debounce)
+{
+ void __iomem *reg;
+ u32 val;
+ u32 l;
+
+ if (!bank->dbck_flag)
+ return;
+
+ if (debounce < 32)
+ debounce = 0x01;
+ else if (debounce > 7936)
+ debounce = 0xff;
+ else
+ debounce = (debounce / 0x1f) - 1;
+
+ l = BIT(offset);
+
+ clk_prepare_enable(bank->dbck);
+ reg = bank->base + bank->regs->debounce;
+ writel_relaxed(debounce, reg);
+
+ reg = bank->base + bank->regs->debounce_en;
+ val = readl_relaxed(reg);
+
+ if (debounce)
+ val |= l;
+ else
+ val &= ~l;
+ bank->dbck_enable_mask = val;
+
+ writel_relaxed(val, reg);
+ clk_disable_unprepare(bank->dbck);
+ /*
+ * Enable debounce clock per module.
+ * This call is mandatory because in omap_gpio_request() when
+ * *_runtime_get_sync() is called, _gpio_dbck_enable() within
+ * runtime callbck fails to turn on dbck because dbck_enable_mask
+ * used within _gpio_dbck_enable() is still not initialized at
+ * that point. Therefore we have to enable dbck here.
+ */
+ omap_gpio_dbck_enable(bank);
+ if (bank->dbck_enable_mask) {
+ bank->context.debounce = debounce;
+ bank->context.debounce_en = val;
+ }
+}
+
+/**
+ * omap_clear_gpio_debounce - clear debounce settings for a gpio
+ * @bank: the gpio bank we're acting upon
+ * @offset: the gpio number on this @bank
+ *
+ * If a gpio is using debounce, then clear the debounce enable bit and if
+ * this is the only gpio in this bank using debounce, then clear the debounce
+ * time too. The debounce clock will also be disabled when calling this function
+ * if this is the only gpio in the bank using debounce.
+ */
+static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
+{
+ u32 gpio_bit = BIT(offset);
+
+ if (!bank->dbck_flag)
+ return;
+
+ if (!(bank->dbck_enable_mask & gpio_bit))
+ return;
+
+ bank->dbck_enable_mask &= ~gpio_bit;
+ bank->context.debounce_en &= ~gpio_bit;
+ writel_relaxed(bank->context.debounce_en,
+ bank->base + bank->regs->debounce_en);
+
+ if (!bank->dbck_enable_mask) {
+ bank->context.debounce = 0;
+ writel_relaxed(bank->context.debounce, bank->base +
+ bank->regs->debounce);
+ clk_disable_unprepare(bank->dbck);
+ bank->dbck_enabled = false;
+ }
+}
+
+static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
+ unsigned trigger)
+{
+ void __iomem *base = bank->base;
+ u32 gpio_bit = BIT(gpio);
+
+ omap_gpio_rmw(base, bank->regs->leveldetect0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ omap_gpio_rmw(base, bank->regs->leveldetect1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ omap_gpio_rmw(base, bank->regs->risingdetect, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ omap_gpio_rmw(base, bank->regs->fallingdetect, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
+
+ bank->context.leveldetect0 =
+ readl_relaxed(bank->base + bank->regs->leveldetect0);
+ bank->context.leveldetect1 =
+ readl_relaxed(bank->base + bank->regs->leveldetect1);
+ bank->context.risingdetect =
+ readl_relaxed(bank->base + bank->regs->risingdetect);
+ bank->context.fallingdetect =
+ readl_relaxed(bank->base + bank->regs->fallingdetect);
+
+ if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
+ omap_gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0);
+ bank->context.wake_en =
+ readl_relaxed(bank->base + bank->regs->wkup_en);
+ }
+
+ /* This part needs to be executed always for OMAP{34xx, 44xx} */
+ if (!bank->regs->irqctrl) {
+ /* On omap24xx proceed only when valid GPIO bit is set */
+ if (bank->non_wakeup_gpios) {
+ if (!(bank->non_wakeup_gpios & gpio_bit))
+ goto exit;
+ }
+
+ /*
+ * Log the edge gpio and manually trigger the IRQ
+ * after resume if the input level changes
+ * to avoid irq lost during PER RET/OFF mode
+ * Applies for omap2 non-wakeup gpio and all omap3 gpios
+ */
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->enabled_non_wakeup_gpios |= gpio_bit;
+ else
+ bank->enabled_non_wakeup_gpios &= ~gpio_bit;
+ }
+
+exit:
+ bank->level_mask =
+ readl_relaxed(bank->base + bank->regs->leveldetect0) |
+ readl_relaxed(bank->base + bank->regs->leveldetect1);
+}
+
+#ifdef CONFIG_ARCH_OMAP1
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once. For all other chips, this function is a noop.
+ */
+static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg = bank->base;
+ u32 l = 0;
+
+ if (!bank->regs->irqctrl)
+ return;
+
+ reg += bank->regs->irqctrl;
+
+ l = readl_relaxed(reg);
+ if ((l >> gpio) & 1)
+ l &= ~(BIT(gpio));
+ else
+ l |= BIT(gpio);
+
+ writel_relaxed(l, reg);
+}
+#else
+static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
+#endif
+
+static int omap_set_gpio_triggering(struct gpio_bank *bank, int gpio,
+ unsigned trigger)
+{
+ void __iomem *reg = bank->base;
+ void __iomem *base = bank->base;
+ u32 l = 0;
+
+ if (bank->regs->leveldetect0 && bank->regs->wkup_en) {
+ omap_set_gpio_trigger(bank, gpio, trigger);
+ } else if (bank->regs->irqctrl) {
+ reg += bank->regs->irqctrl;
+
+ l = readl_relaxed(reg);
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= BIT(gpio);
+ if (trigger & IRQ_TYPE_EDGE_RISING)
+ l |= BIT(gpio);
+ else if (trigger & IRQ_TYPE_EDGE_FALLING)
+ l &= ~(BIT(gpio));
+ else
+ return -EINVAL;
+
+ writel_relaxed(l, reg);
+ } else if (bank->regs->edgectrl1) {
+ if (gpio & 0x08)
+ reg += bank->regs->edgectrl2;
+ else
+ reg += bank->regs->edgectrl1;
+
+ gpio &= 0x07;
+ l = readl_relaxed(reg);
+ l &= ~(3 << (gpio << 1));
+ if (trigger & IRQ_TYPE_EDGE_RISING)
+ l |= 2 << (gpio << 1);
+ if (trigger & IRQ_TYPE_EDGE_FALLING)
+ l |= BIT(gpio << 1);
+
+ /* Enable wake-up during idle for dynamic tick */
+ omap_gpio_rmw(base, bank->regs->wkup_en, BIT(gpio), trigger);
+ bank->context.wake_en =
+ readl_relaxed(bank->base + bank->regs->wkup_en);
+ writel_relaxed(l, reg);
+ }
+ return 0;
+}
+
+static void omap_enable_gpio_module(struct gpio_bank *bank, unsigned offset)
+{
+ if (bank->regs->pinctrl) {
+ void __iomem *reg = bank->base + bank->regs->pinctrl;
+
+ /* Claim the pin for MPU */
+ writel_relaxed(readl_relaxed(reg) | (BIT(offset)), reg);
+ }
+
+ if (bank->regs->ctrl && !BANK_USED(bank)) {
+ void __iomem *reg = bank->base + bank->regs->ctrl;
+ u32 ctrl;
+
+ ctrl = readl_relaxed(reg);
+ /* Module is enabled, clocks are not gated */
+ ctrl &= ~GPIO_MOD_CTRL_BIT;
+ writel_relaxed(ctrl, reg);
+ bank->context.ctrl = ctrl;
+ }
+}
+
+static void omap_disable_gpio_module(struct gpio_bank *bank, unsigned offset)
+{
+ void __iomem *base = bank->base;
+
+ if (bank->regs->wkup_en &&
+ !LINE_USED(bank->mod_usage, offset) &&
+ !LINE_USED(bank->irq_usage, offset)) {
+ /* Disable wake-up during idle for dynamic tick */
+ omap_gpio_rmw(base, bank->regs->wkup_en, BIT(offset), 0);
+ bank->context.wake_en =
+ readl_relaxed(bank->base + bank->regs->wkup_en);
+ }
+
+ if (bank->regs->ctrl && !BANK_USED(bank)) {
+ void __iomem *reg = bank->base + bank->regs->ctrl;
+ u32 ctrl;
+
+ ctrl = readl_relaxed(reg);
+ /* Module is disabled, clocks are gated */
+ ctrl |= GPIO_MOD_CTRL_BIT;
+ writel_relaxed(ctrl, reg);
+ bank->context.ctrl = ctrl;
+ }
+}
+
+static int omap_gpio_is_input(struct gpio_bank *bank, unsigned offset)
+{
+ void __iomem *reg = bank->base + bank->regs->direction;
+
+ return readl_relaxed(reg) & BIT(offset);
+}
+
+static void omap_gpio_init_irq(struct gpio_bank *bank, unsigned offset)
+{
+ if (!LINE_USED(bank->mod_usage, offset)) {
+ omap_enable_gpio_module(bank, offset);
+ omap_set_gpio_direction(bank, offset, 1);
+ }
+ bank->irq_usage |= BIT(offset);
+}
+
+static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
+{
+ struct gpio_bank *bank = omap_irq_data_get_bank(d);
+ int retval;
+ unsigned long flags;
+ unsigned offset = d->hwirq;
+
+ if (!BANK_USED(bank))
+ pm_runtime_get_sync(bank->dev);
+
+ if (type & ~IRQ_TYPE_SENSE_MASK)
+ return -EINVAL;
+
+ if (!bank->regs->leveldetect0 &&
+ (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
+ return -EINVAL;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ retval = omap_set_gpio_triggering(bank, offset, type);
+ omap_gpio_init_irq(bank, offset);
+ if (!omap_gpio_is_input(bank, offset)) {
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+ return -EINVAL;
+ }
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+ __irq_set_handler_locked(d->irq, handle_level_irq);
+ else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ __irq_set_handler_locked(d->irq, handle_edge_irq);
+
+ return retval;
+}
+
+static void omap_clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+ void __iomem *reg = bank->base;
+
+ reg += bank->regs->irqstatus;
+ writel_relaxed(gpio_mask, reg);
+
+ /* Workaround for clearing DSP GPIO interrupts to allow retention */
+ if (bank->regs->irqstatus2) {
+ reg = bank->base + bank->regs->irqstatus2;
+ writel_relaxed(gpio_mask, reg);
+ }
+
+ /* Flush posted write for the irq status to avoid spurious interrupts */
+ readl_relaxed(reg);
+}
+
+static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank,
+ unsigned offset)
+{
+ omap_clear_gpio_irqbank(bank, BIT(offset));
+}
+
+static u32 omap_get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+ void __iomem *reg = bank->base;
+ u32 l;
+ u32 mask = (BIT(bank->width)) - 1;
+
+ reg += bank->regs->irqenable;
+ l = readl_relaxed(reg);
+ if (bank->regs->irqenable_inv)
+ l = ~l;
+ l &= mask;
+ return l;
+}
+
+static void omap_enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+ void __iomem *reg = bank->base;
+ u32 l;
+
+ if (bank->regs->set_irqenable) {
+ reg += bank->regs->set_irqenable;
+ l = gpio_mask;
+ bank->context.irqenable1 |= gpio_mask;
+ } else {
+ reg += bank->regs->irqenable;
+ l = readl_relaxed(reg);
+ if (bank->regs->irqenable_inv)
+ l &= ~gpio_mask;
+ else
+ l |= gpio_mask;
+ bank->context.irqenable1 = l;
+ }
+
+ writel_relaxed(l, reg);
+}
+
+static void omap_disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+ void __iomem *reg = bank->base;
+ u32 l;
+
+ if (bank->regs->clr_irqenable) {
+ reg += bank->regs->clr_irqenable;
+ l = gpio_mask;
+ bank->context.irqenable1 &= ~gpio_mask;
+ } else {
+ reg += bank->regs->irqenable;
+ l = readl_relaxed(reg);
+ if (bank->regs->irqenable_inv)
+ l |= gpio_mask;
+ else
+ l &= ~gpio_mask;
+ bank->context.irqenable1 = l;
+ }
+
+ writel_relaxed(l, reg);
+}
+
+static inline void omap_set_gpio_irqenable(struct gpio_bank *bank,
+ unsigned offset, int enable)
+{
+ if (enable)
+ omap_enable_gpio_irqbank(bank, BIT(offset));
+ else
+ omap_disable_gpio_irqbank(bank, BIT(offset));
+}
+
+/*
+ * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
+ * 1510 does not seem to have a wake-up register. If JTAG is connected
+ * to the target, system will wake up always on GPIO events. While
+ * system is running all registered GPIO interrupts need to have wake-up
+ * enabled. When system is suspended, only selected GPIO interrupts need
+ * to have wake-up enabled.
+ */
+static int omap_set_gpio_wakeup(struct gpio_bank *bank, unsigned offset,
+ int enable)
+{
+ u32 gpio_bit = BIT(offset);
+ unsigned long flags;
+
+ if (bank->non_wakeup_gpios & gpio_bit) {
+ dev_err(bank->dev,
+ "Unable to modify wakeup on non-wakeup GPIO%d\n",
+ offset);
+ return -EINVAL;
+ }
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ if (enable)
+ bank->context.wake_en |= gpio_bit;
+ else
+ bank->context.wake_en &= ~gpio_bit;
+
+ writel_relaxed(bank->context.wake_en, bank->base + bank->regs->wkup_en);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
+static void omap_reset_gpio(struct gpio_bank *bank, unsigned offset)
+{
+ omap_set_gpio_direction(bank, offset, 1);
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_clear_gpio_irqstatus(bank, offset);
+ omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+ omap_clear_gpio_debounce(bank, offset);
+}
+
+/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
+static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
+{
+ struct gpio_bank *bank = omap_irq_data_get_bank(d);
+ unsigned offset = d->hwirq;
+
+ return omap_set_gpio_wakeup(bank, offset, enable);
+}
+
+static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+ unsigned long flags;
+
+ /*
+ * If this is the first gpio_request for the bank,
+ * enable the bank module.
+ */
+ if (!BANK_USED(bank))
+ pm_runtime_get_sync(bank->dev);
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ /* Set trigger to none. You need to enable the desired trigger with
+ * request_irq() or set_irq_type(). Only do this if the IRQ line has
+ * not already been requested.
+ */
+ if (!LINE_USED(bank->irq_usage, offset)) {
+ omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+ omap_enable_gpio_module(bank, offset);
+ }
+ bank->mod_usage |= BIT(offset);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
+static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ bank->mod_usage &= ~(BIT(offset));
+ omap_disable_gpio_module(bank, offset);
+ omap_reset_gpio(bank, offset);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ /*
+ * If this is the last gpio to be freed in the bank,
+ * disable the bank module.
+ */
+ if (!BANK_USED(bank))
+ pm_runtime_put(bank->dev);
+}
+
+/*
+ * We need to unmask the GPIO bank interrupt as soon as possible to
+ * avoid missing GPIO interrupts for other lines in the bank.
+ * Then we need to mask-read-clear-unmask the triggered GPIO lines
+ * in the bank to avoid missing nested interrupts for a GPIO line.
+ * If we wait to unmask individual GPIO lines in the bank after the
+ * line's interrupt handler has been run, we may miss some nested
+ * interrupts.
+ */
+static void omap_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ void __iomem *isr_reg = NULL;
+ u32 isr;
+ unsigned int bit;
+ struct gpio_bank *bank;
+ int unmasked = 0;
+ struct irq_chip *irqchip = irq_desc_get_chip(desc);
+ struct gpio_chip *chip = irq_get_handler_data(irq);
+
+ chained_irq_enter(irqchip, desc);
+
+ bank = container_of(chip, struct gpio_bank, chip);
+ isr_reg = bank->base + bank->regs->irqstatus;
+ pm_runtime_get_sync(bank->dev);
+
+ if (WARN_ON(!isr_reg))
+ goto exit;
+
+ while (1) {
+ u32 isr_saved, level_mask = 0;
+ u32 enabled;
+
+ enabled = omap_get_gpio_irqbank_mask(bank);
+ isr_saved = isr = readl_relaxed(isr_reg) & enabled;
+
+ if (bank->level_mask)
+ level_mask = bank->level_mask & enabled;
+
+ /* clear edge sensitive interrupts before handler(s) are
+ called so that we don't miss any interrupt occurred while
+ executing them */
+ omap_disable_gpio_irqbank(bank, isr_saved & ~level_mask);
+ omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
+ omap_enable_gpio_irqbank(bank, isr_saved & ~level_mask);
+
+ /* if there is only edge sensitive GPIO pin interrupts
+ configured, we could unmask GPIO bank interrupt immediately */
+ if (!level_mask && !unmasked) {
+ unmasked = 1;
+ chained_irq_exit(irqchip, desc);
+ }
+
+ if (!isr)
+ break;
+
+ while (isr) {
+ bit = __ffs(isr);
+ isr &= ~(BIT(bit));
+
+ /*
+ * Some chips can't respond to both rising and falling
+ * at the same time. If this irq was requested with
+ * both flags, we need to flip the ICR data for the IRQ
+ * to respond to the IRQ for the opposite direction.
+ * This will be indicated in the bank toggle_mask.
+ */
+ if (bank->toggle_mask & (BIT(bit)))
+ omap_toggle_gpio_edge_triggering(bank, bit);
+
+ generic_handle_irq(irq_find_mapping(bank->chip.irqdomain,
+ bit));
+ }
+ }
+ /* if bank has any level sensitive GPIO pin interrupt
+ configured, we must unmask the bank interrupt only after
+ handler(s) are executed in order to avoid spurious bank
+ interrupt */
+exit:
+ if (!unmasked)
+ chained_irq_exit(irqchip, desc);
+ pm_runtime_put(bank->dev);
+}
+
+static unsigned int omap_gpio_irq_startup(struct irq_data *d)
+{
+ struct gpio_bank *bank = omap_irq_data_get_bank(d);
+ unsigned long flags;
+ unsigned offset = d->hwirq;
+
+ if (!BANK_USED(bank))
+ pm_runtime_get_sync(bank->dev);
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ omap_gpio_init_irq(bank, offset);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+ omap_gpio_unmask_irq(d);
+
+ return 0;
+}
+
+static void omap_gpio_irq_shutdown(struct irq_data *d)
+{
+ struct gpio_bank *bank = omap_irq_data_get_bank(d);
+ unsigned long flags;
+ unsigned offset = d->hwirq;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ bank->irq_usage &= ~(BIT(offset));
+ omap_disable_gpio_module(bank, offset);
+ omap_reset_gpio(bank, offset);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ /*
+ * If this is the last IRQ to be freed in the bank,
+ * disable the bank module.
+ */
+ if (!BANK_USED(bank))
+ pm_runtime_put(bank->dev);
+}
+
+static void omap_gpio_ack_irq(struct irq_data *d)
+{
+ struct gpio_bank *bank = omap_irq_data_get_bank(d);
+ unsigned offset = d->hwirq;
+
+ omap_clear_gpio_irqstatus(bank, offset);
+}
+
+static void omap_gpio_mask_irq(struct irq_data *d)
+{
+ struct gpio_bank *bank = omap_irq_data_get_bank(d);
+ unsigned offset = d->hwirq;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static void omap_gpio_unmask_irq(struct irq_data *d)
+{
+ struct gpio_bank *bank = omap_irq_data_get_bank(d);
+ unsigned offset = d->hwirq;
+ u32 trigger = irqd_get_trigger_type(d);
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ if (trigger)
+ omap_set_gpio_triggering(bank, offset, trigger);
+
+ /* For level-triggered GPIOs, the clearing must be done after
+ * the HW source is cleared, thus after the handler has run */
+ if (bank->level_mask & BIT(offset)) {
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_clear_gpio_irqstatus(bank, offset);
+ }
+
+ omap_set_gpio_irqenable(bank, offset, 1);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*---------------------------------------------------------------------*/
+
+static int omap_mpuio_suspend_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ void __iomem *mask_reg = bank->base +
+ OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ writel_relaxed(0xffff & ~bank->context.wake_en, mask_reg);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
+static int omap_mpuio_resume_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ void __iomem *mask_reg = bank->base +
+ OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ writel_relaxed(bank->context.wake_en, mask_reg);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
+static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+ .suspend_noirq = omap_mpuio_suspend_noirq,
+ .resume_noirq = omap_mpuio_resume_noirq,
+};
+
+/* use platform_driver for this. */
+static struct platform_driver omap_mpuio_driver = {
+ .driver = {
+ .name = "mpuio",
+ .pm = &omap_mpuio_dev_pm_ops,
+ },
+};
+
+static struct platform_device omap_mpuio_device = {
+ .name = "mpuio",
+ .id = -1,
+ .dev = {
+ .driver = &omap_mpuio_driver.driver,
+ }
+ /* could list the /proc/iomem resources */
+};
+
+static inline void omap_mpuio_init(struct gpio_bank *bank)
+{
+ platform_set_drvdata(&omap_mpuio_device, bank);
+
+ if (platform_driver_register(&omap_mpuio_driver) == 0)
+ (void) platform_device_register(&omap_mpuio_device);
+}
+
+/*---------------------------------------------------------------------*/
+
+static int omap_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_bank *bank;
+ unsigned long flags;
+ void __iomem *reg;
+ int dir;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+ reg = bank->base + bank->regs->direction;
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ dir = !!(readl_relaxed(reg) & BIT(offset));
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+ return dir;
+}
+
+static int omap_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_bank *bank;
+ unsigned long flags;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ omap_set_gpio_direction(bank, offset, 1);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+ return 0;
+}
+
+static int omap_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_bank *bank;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+
+ if (omap_gpio_is_input(bank, offset))
+ return omap_get_gpio_datain(bank, offset);
+ else
+ return omap_get_gpio_dataout(bank, offset);
+}
+
+static int omap_gpio_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct gpio_bank *bank;
+ unsigned long flags;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ bank->set_dataout(bank, offset, value);
+ omap_set_gpio_direction(bank, offset, 0);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+ return 0;
+}
+
+static int omap_gpio_debounce(struct gpio_chip *chip, unsigned offset,
+ unsigned debounce)
+{
+ struct gpio_bank *bank;
+ unsigned long flags;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ omap2_set_gpio_debounce(bank, offset, debounce);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
+static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct gpio_bank *bank;
+ unsigned long flags;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+ raw_spin_lock_irqsave(&bank->lock, flags);
+ bank->set_dataout(bank, offset, value);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*---------------------------------------------------------------------*/
+
+static void __init omap_gpio_show_rev(struct gpio_bank *bank)
+{
+ static bool called;
+ u32 rev;
+
+ if (called || bank->regs->revision == USHRT_MAX)
+ return;
+
+ rev = readw_relaxed(bank->base + bank->regs->revision);
+ pr_info("OMAP GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+
+ called = true;
+}
+
+static void omap_gpio_mod_init(struct gpio_bank *bank)
+{
+ void __iomem *base = bank->base;
+ u32 l = 0xffffffff;
+
+ if (bank->width == 16)
+ l = 0xffff;
+
+ if (bank->is_mpuio) {
+ writel_relaxed(l, bank->base + bank->regs->irqenable);
+ return;
+ }
+
+ omap_gpio_rmw(base, bank->regs->irqenable, l,
+ bank->regs->irqenable_inv);
+ omap_gpio_rmw(base, bank->regs->irqstatus, l,
+ !bank->regs->irqenable_inv);
+ if (bank->regs->debounce_en)
+ writel_relaxed(0, base + bank->regs->debounce_en);
+
+ /* Save OE default value (0xffffffff) in the context */
+ bank->context.oe = readl_relaxed(bank->base + bank->regs->direction);
+ /* Initialize interface clk ungated, module enabled */
+ if (bank->regs->ctrl)
+ writel_relaxed(0, base + bank->regs->ctrl);
+
+ bank->dbck = clk_get(bank->dev, "dbclk");
+ if (IS_ERR(bank->dbck))
+ dev_err(bank->dev, "Could not get gpio dbck\n");
+}
+
+static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
+{
+ static int gpio;
+ int irq_base = 0;
+ int ret;
+
+ /*
+ * REVISIT eventually switch from OMAP-specific gpio structs
+ * over to the generic ones
+ */
+ bank->chip.request = omap_gpio_request;
+ bank->chip.free = omap_gpio_free;
+ bank->chip.get_direction = omap_gpio_get_direction;
+ bank->chip.direction_input = omap_gpio_input;
+ bank->chip.get = omap_gpio_get;
+ bank->chip.direction_output = omap_gpio_output;
+ bank->chip.set_debounce = omap_gpio_debounce;
+ bank->chip.set = omap_gpio_set;
+ if (bank->is_mpuio) {
+ bank->chip.label = "mpuio";
+ if (bank->regs->wkup_en)
+ bank->chip.dev = &omap_mpuio_device.dev;
+ bank->chip.base = OMAP_MPUIO(0);
+ } else {
+ bank->chip.label = "gpio";
+ bank->chip.base = gpio;
+ gpio += bank->width;
+ }
+ bank->chip.ngpio = bank->width;
+
+ ret = gpiochip_add(&bank->chip);
+ if (ret) {
+ dev_err(bank->dev, "Could not register gpio chip %d\n", ret);
+ return ret;
+ }
+
+#ifdef CONFIG_ARCH_OMAP1
+ /*
+ * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
+ * irq_alloc_descs() since a base IRQ offset will no longer be needed.
+ */
+ irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
+ if (irq_base < 0) {
+ dev_err(bank->dev, "Couldn't allocate IRQ numbers\n");
+ return -ENODEV;
+ }
+#endif
+
+ /* MPUIO is a bit different, reading IRQ status clears it */
+ if (bank->is_mpuio) {
+ irqc->irq_ack = dummy_irq_chip.irq_ack;
+ irqc->irq_mask = irq_gc_mask_set_bit;
+ irqc->irq_unmask = irq_gc_mask_clr_bit;
+ if (!bank->regs->wkup_en)
+ irqc->irq_set_wake = NULL;
+ }
+
+ ret = gpiochip_irqchip_add(&bank->chip, irqc,
+ irq_base, omap_gpio_irq_handler,
+ IRQ_TYPE_NONE);
+
+ if (ret) {
+ dev_err(bank->dev, "Couldn't add irqchip to gpiochip %d\n", ret);
+ gpiochip_remove(&bank->chip);
+ return -ENODEV;
+ }
+
+ gpiochip_set_chained_irqchip(&bank->chip, irqc,
+ bank->irq, omap_gpio_irq_handler);
+
+ return 0;
+}
+
+static const struct of_device_id omap_gpio_match[];
+
+static int omap_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ const struct of_device_id *match;
+ const struct omap_gpio_platform_data *pdata;
+ struct resource *res;
+ struct gpio_bank *bank;
+ struct irq_chip *irqc;
+ int ret;
+
+ match = of_match_device(of_match_ptr(omap_gpio_match), dev);
+
+ pdata = match ? match->data : dev_get_platdata(dev);
+ if (!pdata)
+ return -EINVAL;
+
+ bank = devm_kzalloc(dev, sizeof(struct gpio_bank), GFP_KERNEL);
+ if (!bank) {
+ dev_err(dev, "Memory alloc failed\n");
+ return -ENOMEM;
+ }
+
+ irqc = devm_kzalloc(dev, sizeof(*irqc), GFP_KERNEL);
+ if (!irqc)
+ return -ENOMEM;
+
+ irqc->irq_startup = omap_gpio_irq_startup,
+ irqc->irq_shutdown = omap_gpio_irq_shutdown,
+ irqc->irq_ack = omap_gpio_ack_irq,
+ irqc->irq_mask = omap_gpio_mask_irq,
+ irqc->irq_unmask = omap_gpio_unmask_irq,
+ irqc->irq_set_type = omap_gpio_irq_type,
+ irqc->irq_set_wake = omap_gpio_wake_enable,
+ irqc->name = dev_name(&pdev->dev);
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(!res)) {
+ dev_err(dev, "Invalid IRQ resource\n");
+ return -ENODEV;
+ }
+
+ bank->irq = res->start;
+ bank->dev = dev;
+ bank->chip.dev = dev;
+ bank->dbck_flag = pdata->dbck_flag;
+ bank->stride = pdata->bank_stride;
+ bank->width = pdata->bank_width;
+ bank->is_mpuio = pdata->is_mpuio;
+ bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
+ bank->regs = pdata->regs;
+#ifdef CONFIG_OF_GPIO
+ bank->chip.of_node = of_node_get(node);
+#endif
+ if (node) {
+ if (!of_property_read_bool(node, "ti,gpio-always-on"))
+ bank->loses_context = true;
+ } else {
+ bank->loses_context = pdata->loses_context;
+
+ if (bank->loses_context)
+ bank->get_context_loss_count =
+ pdata->get_context_loss_count;
+ }
+
+ if (bank->regs->set_dataout && bank->regs->clr_dataout)
+ bank->set_dataout = omap_set_gpio_dataout_reg;
+ else
+ bank->set_dataout = omap_set_gpio_dataout_mask;
+
+ raw_spin_lock_init(&bank->lock);
+
+ /* Static mapping, never released */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ bank->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(bank->base)) {
+ irq_domain_remove(bank->chip.irqdomain);
+ return PTR_ERR(bank->base);
+ }
+
+ platform_set_drvdata(pdev, bank);
+
+ pm_runtime_enable(bank->dev);
+ pm_runtime_irq_safe(bank->dev);
+ pm_runtime_get_sync(bank->dev);
+
+ if (bank->is_mpuio)
+ omap_mpuio_init(bank);
+
+ omap_gpio_mod_init(bank);
+
+ ret = omap_gpio_chip_init(bank, irqc);
+ if (ret)
+ return ret;
+
+ omap_gpio_show_rev(bank);
+
+ pm_runtime_put(bank->dev);
+
+ list_add_tail(&bank->node, &omap_gpio_list);
+
+ return 0;
+}
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+#if defined(CONFIG_PM)
+static void omap_gpio_restore_context(struct gpio_bank *bank);
+
+static int omap_gpio_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ u32 l1 = 0, l2 = 0;
+ unsigned long flags;
+ u32 wake_low, wake_hi;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+
+ /*
+ * Only edges can generate a wakeup event to the PRCM.
+ *
+ * Therefore, ensure any wake-up capable GPIOs have
+ * edge-detection enabled before going idle to ensure a wakeup
+ * to the PRCM is generated on a GPIO transition. (c.f. 34xx
+ * NDA TRM 25.5.3.1)
+ *
+ * The normal values will be restored upon ->runtime_resume()
+ * by writing back the values saved in bank->context.
+ */
+ wake_low = bank->context.leveldetect0 & bank->context.wake_en;
+ if (wake_low)
+ writel_relaxed(wake_low | bank->context.fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ wake_hi = bank->context.leveldetect1 & bank->context.wake_en;
+ if (wake_hi)
+ writel_relaxed(wake_hi | bank->context.risingdetect,
+ bank->base + bank->regs->risingdetect);
+
+ if (!bank->enabled_non_wakeup_gpios)
+ goto update_gpio_context_count;
+
+ if (bank->power_mode != OFF_MODE) {
+ bank->power_mode = 0;
+ goto update_gpio_context_count;
+ }
+ /*
+ * If going to OFF, remove triggering for all
+ * non-wakeup GPIOs. Otherwise spurious IRQs will be
+ * generated. See OMAP2420 Errata item 1.101.
+ */
+ bank->saved_datain = readl_relaxed(bank->base +
+ bank->regs->datain);
+ l1 = bank->context.fallingdetect;
+ l2 = bank->context.risingdetect;
+
+ l1 &= ~bank->enabled_non_wakeup_gpios;
+ l2 &= ~bank->enabled_non_wakeup_gpios;
+
+ writel_relaxed(l1, bank->base + bank->regs->fallingdetect);
+ writel_relaxed(l2, bank->base + bank->regs->risingdetect);
+
+ bank->workaround_enabled = true;
+
+update_gpio_context_count:
+ if (bank->get_context_loss_count)
+ bank->context_loss_count =
+ bank->get_context_loss_count(bank->dev);
+
+ omap_gpio_dbck_disable(bank);
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
+static void omap_gpio_init_context(struct gpio_bank *p);
+
+static int omap_gpio_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ u32 l = 0, gen, gen0, gen1;
+ unsigned long flags;
+ int c;
+
+ raw_spin_lock_irqsave(&bank->lock, flags);
+
+ /*
+ * On the first resume during the probe, the context has not
+ * been initialised and so initialise it now. Also initialise
+ * the context loss count.
+ */
+ if (bank->loses_context && !bank->context_valid) {
+ omap_gpio_init_context(bank);
+
+ if (bank->get_context_loss_count)
+ bank->context_loss_count =
+ bank->get_context_loss_count(bank->dev);
+ }
+
+ omap_gpio_dbck_enable(bank);
+
+ /*
+ * In ->runtime_suspend(), level-triggered, wakeup-enabled
+ * GPIOs were set to edge trigger also in order to be able to
+ * generate a PRCM wakeup. Here we restore the
+ * pre-runtime_suspend() values for edge triggering.
+ */
+ writel_relaxed(bank->context.fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ writel_relaxed(bank->context.risingdetect,
+ bank->base + bank->regs->risingdetect);
+
+ if (bank->loses_context) {
+ if (!bank->get_context_loss_count) {
+ omap_gpio_restore_context(bank);
+ } else {
+ c = bank->get_context_loss_count(bank->dev);
+ if (c != bank->context_loss_count) {
+ omap_gpio_restore_context(bank);
+ } else {
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+ return 0;
+ }
+ }
+ }
+
+ if (!bank->workaround_enabled) {
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+ return 0;
+ }
+
+ l = readl_relaxed(bank->base + bank->regs->datain);
+
+ /*
+ * Check if any of the non-wakeup interrupt GPIOs have changed
+ * state. If so, generate an IRQ by software. This is
+ * horribly racy, but it's the best we can do to work around
+ * this silicon bug.
+ */
+ l ^= bank->saved_datain;
+ l &= bank->enabled_non_wakeup_gpios;
+
+ /*
+ * No need to generate IRQs for the rising edge for gpio IRQs
+ * configured with falling edge only; and vice versa.
+ */
+ gen0 = l & bank->context.fallingdetect;
+ gen0 &= bank->saved_datain;
+
+ gen1 = l & bank->context.risingdetect;
+ gen1 &= ~(bank->saved_datain);
+
+ /* FIXME: Consider GPIO IRQs with level detections properly! */
+ gen = l & (~(bank->context.fallingdetect) &
+ ~(bank->context.risingdetect));
+ /* Consider all GPIO IRQs needed to be updated */
+ gen |= gen0 | gen1;
+
+ if (gen) {
+ u32 old0, old1;
+
+ old0 = readl_relaxed(bank->base + bank->regs->leveldetect0);
+ old1 = readl_relaxed(bank->base + bank->regs->leveldetect1);
+
+ if (!bank->regs->irqstatus_raw0) {
+ writel_relaxed(old0 | gen, bank->base +
+ bank->regs->leveldetect0);
+ writel_relaxed(old1 | gen, bank->base +
+ bank->regs->leveldetect1);
+ }
+
+ if (bank->regs->irqstatus_raw0) {
+ writel_relaxed(old0 | l, bank->base +
+ bank->regs->leveldetect0);
+ writel_relaxed(old1 | l, bank->base +
+ bank->regs->leveldetect1);
+ }
+ writel_relaxed(old0, bank->base + bank->regs->leveldetect0);
+ writel_relaxed(old1, bank->base + bank->regs->leveldetect1);
+ }
+
+ bank->workaround_enabled = false;
+ raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+void omap2_gpio_prepare_for_idle(int pwr_mode)
+{
+ struct gpio_bank *bank;
+
+ list_for_each_entry(bank, &omap_gpio_list, node) {
+ if (!BANK_USED(bank) || !bank->loses_context)
+ continue;
+
+ bank->power_mode = pwr_mode;
+
+ pm_runtime_put_sync_suspend(bank->dev);
+ }
+}
+
+void omap2_gpio_resume_after_idle(void)
+{
+ struct gpio_bank *bank;
+
+ list_for_each_entry(bank, &omap_gpio_list, node) {
+ if (!BANK_USED(bank) || !bank->loses_context)
+ continue;
+
+ pm_runtime_get_sync(bank->dev);
+ }
+}
+
+#if defined(CONFIG_PM)
+static void omap_gpio_init_context(struct gpio_bank *p)
+{
+ struct omap_gpio_reg_offs *regs = p->regs;
+ void __iomem *base = p->base;
+
+ p->context.ctrl = readl_relaxed(base + regs->ctrl);
+ p->context.oe = readl_relaxed(base + regs->direction);
+ p->context.wake_en = readl_relaxed(base + regs->wkup_en);
+ p->context.leveldetect0 = readl_relaxed(base + regs->leveldetect0);
+ p->context.leveldetect1 = readl_relaxed(base + regs->leveldetect1);
+ p->context.risingdetect = readl_relaxed(base + regs->risingdetect);
+ p->context.fallingdetect = readl_relaxed(base + regs->fallingdetect);
+ p->context.irqenable1 = readl_relaxed(base + regs->irqenable);
+ p->context.irqenable2 = readl_relaxed(base + regs->irqenable2);
+
+ if (regs->set_dataout && p->regs->clr_dataout)
+ p->context.dataout = readl_relaxed(base + regs->set_dataout);
+ else
+ p->context.dataout = readl_relaxed(base + regs->dataout);
+
+ p->context_valid = true;
+}
+
+static void omap_gpio_restore_context(struct gpio_bank *bank)
+{
+ writel_relaxed(bank->context.wake_en,
+ bank->base + bank->regs->wkup_en);
+ writel_relaxed(bank->context.ctrl, bank->base + bank->regs->ctrl);
+ writel_relaxed(bank->context.leveldetect0,
+ bank->base + bank->regs->leveldetect0);
+ writel_relaxed(bank->context.leveldetect1,
+ bank->base + bank->regs->leveldetect1);
+ writel_relaxed(bank->context.risingdetect,
+ bank->base + bank->regs->risingdetect);
+ writel_relaxed(bank->context.fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ if (bank->regs->set_dataout && bank->regs->clr_dataout)
+ writel_relaxed(bank->context.dataout,
+ bank->base + bank->regs->set_dataout);
+ else
+ writel_relaxed(bank->context.dataout,
+ bank->base + bank->regs->dataout);
+ writel_relaxed(bank->context.oe, bank->base + bank->regs->direction);
+
+ if (bank->dbck_enable_mask) {
+ writel_relaxed(bank->context.debounce, bank->base +
+ bank->regs->debounce);
+ writel_relaxed(bank->context.debounce_en,
+ bank->base + bank->regs->debounce_en);
+ }
+
+ writel_relaxed(bank->context.irqenable1,
+ bank->base + bank->regs->irqenable);
+ writel_relaxed(bank->context.irqenable2,
+ bank->base + bank->regs->irqenable2);
+}
+#endif /* CONFIG_PM */
+#else
+#define omap_gpio_runtime_suspend NULL
+#define omap_gpio_runtime_resume NULL
+static inline void omap_gpio_init_context(struct gpio_bank *p) {}
+#endif
+
+static const struct dev_pm_ops gpio_pm_ops = {
+ SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
+ NULL)
+};
+
+#if defined(CONFIG_OF)
+static struct omap_gpio_reg_offs omap2_gpio_regs = {
+ .revision = OMAP24XX_GPIO_REVISION,
+ .direction = OMAP24XX_GPIO_OE,
+ .datain = OMAP24XX_GPIO_DATAIN,
+ .dataout = OMAP24XX_GPIO_DATAOUT,
+ .set_dataout = OMAP24XX_GPIO_SETDATAOUT,
+ .clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT,
+ .irqstatus = OMAP24XX_GPIO_IRQSTATUS1,
+ .irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2,
+ .irqenable = OMAP24XX_GPIO_IRQENABLE1,
+ .irqenable2 = OMAP24XX_GPIO_IRQENABLE2,
+ .set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1,
+ .clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1,
+ .debounce = OMAP24XX_GPIO_DEBOUNCE_VAL,
+ .debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN,
+ .ctrl = OMAP24XX_GPIO_CTRL,
+ .wkup_en = OMAP24XX_GPIO_WAKE_EN,
+ .leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0,
+ .leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1,
+ .risingdetect = OMAP24XX_GPIO_RISINGDETECT,
+ .fallingdetect = OMAP24XX_GPIO_FALLINGDETECT,
+};
+
+static struct omap_gpio_reg_offs omap4_gpio_regs = {
+ .revision = OMAP4_GPIO_REVISION,
+ .direction = OMAP4_GPIO_OE,
+ .datain = OMAP4_GPIO_DATAIN,
+ .dataout = OMAP4_GPIO_DATAOUT,
+ .set_dataout = OMAP4_GPIO_SETDATAOUT,
+ .clr_dataout = OMAP4_GPIO_CLEARDATAOUT,
+ .irqstatus = OMAP4_GPIO_IRQSTATUS0,
+ .irqstatus2 = OMAP4_GPIO_IRQSTATUS1,
+ .irqenable = OMAP4_GPIO_IRQSTATUSSET0,
+ .irqenable2 = OMAP4_GPIO_IRQSTATUSSET1,
+ .set_irqenable = OMAP4_GPIO_IRQSTATUSSET0,
+ .clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0,
+ .debounce = OMAP4_GPIO_DEBOUNCINGTIME,
+ .debounce_en = OMAP4_GPIO_DEBOUNCENABLE,
+ .ctrl = OMAP4_GPIO_CTRL,
+ .wkup_en = OMAP4_GPIO_IRQWAKEN0,
+ .leveldetect0 = OMAP4_GPIO_LEVELDETECT0,
+ .leveldetect1 = OMAP4_GPIO_LEVELDETECT1,
+ .risingdetect = OMAP4_GPIO_RISINGDETECT,
+ .fallingdetect = OMAP4_GPIO_FALLINGDETECT,
+};
+
+static const struct omap_gpio_platform_data omap2_pdata = {
+ .regs = &omap2_gpio_regs,
+ .bank_width = 32,
+ .dbck_flag = false,
+};
+
+static const struct omap_gpio_platform_data omap3_pdata = {
+ .regs = &omap2_gpio_regs,
+ .bank_width = 32,
+ .dbck_flag = true,
+};
+
+static const struct omap_gpio_platform_data omap4_pdata = {
+ .regs = &omap4_gpio_regs,
+ .bank_width = 32,
+ .dbck_flag = true,
+};
+
+static const struct of_device_id omap_gpio_match[] = {
+ {
+ .compatible = "ti,omap4-gpio",
+ .data = &omap4_pdata,
+ },
+ {
+ .compatible = "ti,omap3-gpio",
+ .data = &omap3_pdata,
+ },
+ {
+ .compatible = "ti,omap2-gpio",
+ .data = &omap2_pdata,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, omap_gpio_match);
+#endif
+
+static struct platform_driver omap_gpio_driver = {
+ .probe = omap_gpio_probe,
+ .driver = {
+ .name = "omap_gpio",
+ .pm = &gpio_pm_ops,
+ .of_match_table = of_match_ptr(omap_gpio_match),
+ },
+};
+
+/*
+ * gpio driver register needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap_gpio_drv_reg() is a postcore_initcall.
+ */
+static int __init omap_gpio_drv_reg(void)
+{
+ return platform_driver_register(&omap_gpio_driver);
+}
+postcore_initcall(omap_gpio_drv_reg);