summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/gpio/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/gpio/Kconfig')
-rw-r--r--kernel/drivers/gpio/Kconfig991
1 files changed, 991 insertions, 0 deletions
diff --git a/kernel/drivers/gpio/Kconfig b/kernel/drivers/gpio/Kconfig
new file mode 100644
index 000000000..caefe806d
--- /dev/null
+++ b/kernel/drivers/gpio/Kconfig
@@ -0,0 +1,991 @@
+#
+# GPIO infrastructure and drivers
+#
+
+config ARCH_HAVE_CUSTOM_GPIO_H
+ bool
+ help
+ Selecting this config option from the architecture Kconfig allows
+ the architecture to provide a custom asm/gpio.h implementation
+ overriding the default implementations. New uses of this are
+ strongly discouraged.
+
+config ARCH_WANT_OPTIONAL_GPIOLIB
+ bool
+ help
+ Select this config option from the architecture Kconfig, if
+ it is possible to use gpiolib on the architecture, but let the
+ user decide whether to actually build it or not.
+ Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
+ not depend on GPIOs being available, but rather let the user
+ decide whether he needs it or not.
+
+config ARCH_REQUIRE_GPIOLIB
+ bool
+ select GPIOLIB
+ help
+ Platforms select gpiolib if they use this infrastructure
+ for all their GPIOs, usually starting with ones integrated
+ into SOC processors.
+ Selecting this from the architecture code will cause the gpiolib
+ code to always get built in.
+
+
+menuconfig GPIOLIB
+ bool "GPIO Support"
+ depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
+ help
+ This enables GPIO support through the generic GPIO library.
+ You only need to enable this, if you also want to enable
+ one or more of the GPIO drivers below.
+
+ If unsure, say N.
+
+if GPIOLIB
+
+config GPIO_DEVRES
+ def_bool y
+ depends on HAS_IOMEM
+
+config OF_GPIO
+ def_bool y
+ depends on OF
+
+config GPIO_ACPI
+ def_bool y
+ depends on ACPI
+
+config GPIOLIB_IRQCHIP
+ select IRQ_DOMAIN
+ bool
+
+config DEBUG_GPIO
+ bool "Debug GPIO calls"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to add some extra checks and diagnostics to GPIO calls.
+ These checks help ensure that GPIOs have been properly initialized
+ before they are used, and that sleeping calls are not made from
+ non-sleeping contexts. They can make bitbanged serial protocols
+ slower. The diagnostics help catch the type of setup errors
+ that are most common when setting up new platforms or boards.
+
+config GPIO_SYSFS
+ bool "/sys/class/gpio/... (sysfs interface)"
+ depends on SYSFS
+ help
+ Say Y here to add a sysfs interface for GPIOs.
+
+ This is mostly useful to work around omissions in a system's
+ kernel support. Those are common in custom and semicustom
+ hardware assembled using standard kernels with a minimum of
+ custom patches. In those cases, userspace code may import
+ a given GPIO from the kernel, if no kernel driver requested it.
+
+ Kernel drivers may also request that a particular GPIO be
+ exported to userspace; this can be useful when debugging.
+
+config GPIO_GENERIC
+ tristate
+
+# put drivers in the right section, in alphabetical order
+
+# This symbol is selected by both I2C and SPI expanders
+config GPIO_MAX730X
+ tristate
+
+menu "Memory mapped GPIO drivers"
+
+config GPIO_74XX_MMIO
+ tristate "GPIO driver for 74xx-ICs with MMIO access"
+ depends on OF_GPIO
+ select GPIO_GENERIC
+ help
+ Say yes here to support GPIO functionality for 74xx-compatible ICs
+ with MMIO access. Compatible models include:
+ 1 bit: 741G125 (Input), 741G74 (Output)
+ 2 bits: 742G125 (Input), 7474 (Output)
+ 4 bits: 74125 (Input), 74175 (Output)
+ 6 bits: 74365 (Input), 74174 (Output)
+ 8 bits: 74244 (Input), 74273 (Output)
+ 16 bits: 741624 (Input), 7416374 (Output)
+
+config GPIO_ALTERA
+ tristate "Altera GPIO"
+ depends on OF_GPIO
+ select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
+ help
+ Say Y or M here to build support for the Altera PIO device.
+
+ If driver is built as a module it will be called gpio-altera.
+
+config GPIO_BCM_KONA
+ bool "Broadcom Kona GPIO"
+ depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
+ help
+ Turn on GPIO support for Broadcom "Kona" chips.
+
+config GPIO_CLPS711X
+ tristate "CLPS711X GPIO support"
+ depends on ARCH_CLPS711X || COMPILE_TEST
+ select GPIO_GENERIC
+ help
+ Say yes here to support GPIO on CLPS711X SoCs.
+
+config GPIO_DAVINCI
+ bool "TI Davinci/Keystone GPIO support"
+ default y if ARCH_DAVINCI
+ depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE)
+ help
+ Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.
+
+config GPIO_DWAPB
+ tristate "Synopsys DesignWare APB GPIO driver"
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+ help
+ Say Y or M here to build support for the Synopsys DesignWare APB
+ GPIO block.
+
+config GPIO_EM
+ tristate "Emma Mobile GPIO"
+ depends on ARM && OF_GPIO
+ help
+ Say yes here to support GPIO on Renesas Emma Mobile SoCs.
+
+config GPIO_EP93XX
+ def_bool y
+ depends on ARCH_EP93XX
+ select GPIO_GENERIC
+
+config GPIO_F7188X
+ tristate "F71869, F71869A, F71882FG and F71889F GPIO support"
+ depends on X86
+ help
+ This option enables support for GPIOs found on Fintek Super-I/O
+ chips F71869, F71869A, F71882FG and F71889F.
+
+ To compile this driver as a module, choose M here: the module will
+ be called f7188x-gpio.
+
+config GPIO_GE_FPGA
+ bool "GE FPGA based GPIO"
+ depends on GE_FPGA
+ select GPIO_GENERIC
+ help
+ Support for common GPIO functionality provided on some GE Single Board
+ Computers.
+
+ This driver provides basic support (configure as input or output, read
+ and write pin state) for GPIO implemented in a number of GE single
+ board computers.
+
+config GPIO_GENERIC_PLATFORM
+ tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
+ select GPIO_GENERIC
+ help
+ Say yes here to support basic platform_device memory-mapped GPIO controllers.
+
+config GPIO_GRGPIO
+ tristate "Aeroflex Gaisler GRGPIO support"
+ depends on OF
+ select GPIO_GENERIC
+ select IRQ_DOMAIN
+ help
+ Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
+ VHDL IP core library.
+
+config GPIO_ICH
+ tristate "Intel ICH GPIO"
+ depends on PCI && X86
+ select MFD_CORE
+ select LPC_ICH
+ help
+ Say yes here to support the GPIO functionality of a number of Intel
+ ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
+ ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
+ Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
+
+ If unsure, say N.
+
+config GPIO_IOP
+ tristate "Intel IOP GPIO"
+ depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
+ help
+ Say yes here to support the GPIO functionality of a number of Intel
+ IOP32X or IOP33X.
+
+ If unsure, say N.
+
+config GPIO_IT8761E
+ tristate "IT8761E GPIO support"
+ depends on X86 # unconditional access to IO space.
+ help
+ Say yes here to support GPIO functionality of IT8761E super I/O chip.
+
+config GPIO_LOONGSON
+ bool "Loongson-2/3 GPIO support"
+ depends on CPU_LOONGSON2 || CPU_LOONGSON3
+ help
+ driver for GPIO functionality on Loongson-2F/3A/3B processors.
+
+config GPIO_LYNXPOINT
+ tristate "Intel Lynxpoint GPIO support"
+ depends on ACPI && X86
+ select GPIOLIB_IRQCHIP
+ help
+ driver for GPIO functionality on Intel Lynxpoint PCH chipset
+ Requires ACPI device enumeration code to set up a platform device.
+
+config GPIO_MB86S7X
+ bool "GPIO support for Fujitsu MB86S7x Platforms"
+ depends on ARCH_MB86S7X
+ help
+ Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
+
+config GPIO_MM_LANTIQ
+ bool "Lantiq Memory mapped GPIOs"
+ depends on LANTIQ && SOC_XWAY
+ help
+ This enables support for memory mapped GPIOs on the External Bus Unit
+ (EBU) found on Lantiq SoCs. The gpios are output only as they are
+ created by attaching a 16bit latch to the bus.
+
+config GPIO_MOXART
+ bool "MOXART GPIO support"
+ depends on ARCH_MOXART
+ select GPIO_GENERIC
+ help
+ Select this option to enable GPIO driver for
+ MOXA ART SoC devices.
+
+config GPIO_MPC5200
+ def_bool y
+ depends on PPC_MPC52xx
+
+config GPIO_MPC8XXX
+ bool "MPC512x/MPC8xxx GPIO support"
+ depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+ FSL_SOC_BOOKE || PPC_86xx
+ help
+ Say Y here if you're going to use hardware that connects to the
+ MPC512x/831x/834x/837x/8572/8610 GPIOs.
+
+config GPIO_MSM_V2
+ tristate "Qualcomm MSM GPIO v2"
+ depends on GPIOLIB && OF && ARCH_QCOM
+ help
+ Say yes here to support the GPIO interface on ARM v7 based
+ Qualcomm MSM chips. Most of the pins on the MSM can be
+ selected for GPIO, and are controlled by this driver.
+
+config GPIO_MVEBU
+ def_bool y
+ depends on PLAT_ORION
+ depends on OF
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+
+config GPIO_MXC
+ def_bool y
+ depends on ARCH_MXC
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+
+config GPIO_MXS
+ def_bool y
+ depends on ARCH_MXS
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+
+config GPIO_OCTEON
+ tristate "Cavium OCTEON GPIO"
+ depends on GPIOLIB && CAVIUM_OCTEON_SOC
+ default y
+ help
+ Say yes here to support the on-chip GPIO lines on the OCTEON
+ family of SOCs.
+
+config GPIO_OMAP
+ bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS
+ default y if ARCH_OMAP
+ depends on ARM
+ select GENERIC_IRQ_CHIP
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to enable GPIO support for TI OMAP SoCs.
+
+config GPIO_PL061
+ bool "PrimeCell PL061 GPIO support"
+ depends on ARM_AMBA
+ select IRQ_DOMAIN
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support the PrimeCell PL061 GPIO device
+
+config GPIO_PXA
+ bool "PXA GPIO support"
+ depends on ARCH_PXA || ARCH_MMP
+ help
+ Say yes here to support the PXA GPIO device
+
+config GPIO_RCAR
+ tristate "Renesas R-Car GPIO"
+ depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support GPIO on Renesas R-Car SoCs.
+
+config GPIO_SAMSUNG
+ bool
+ depends on PLAT_SAMSUNG
+ help
+ Legacy GPIO support. Use only for platforms without support for
+ pinctrl.
+
+config GPIO_SCH
+ tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
+ depends on PCI && X86
+ select MFD_CORE
+ select LPC_SCH
+ help
+ Say yes here to support GPIO interface on Intel Poulsbo SCH,
+ Intel Tunnel Creek processor, Intel Centerton processor or
+ Intel Quark X1000 SoC.
+
+ The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
+ powered by the core power rail and are turned off during sleep
+ modes (S3 and higher). The remaining four GPIOs are powered by
+ the Intel SCH suspend power supply. These GPIOs remain
+ active during S3. The suspend powered GPIOs can be used to wake the
+ system from the Suspend-to-RAM state.
+
+ The Intel Tunnel Creek processor has 5 GPIOs powered by the
+ core power rail and 9 from suspend power supply.
+
+ The Intel Centerton processor has a total of 30 GPIO pins.
+ Twenty-one are powered by the core power rail and 9 from the
+ suspend power supply.
+
+ The Intel Quark X1000 SoC has 2 GPIOs powered by the core
+ power well and 6 from the suspend power well.
+
+config GPIO_SCH311X
+ tristate "SMSC SCH311x SuperI/O GPIO"
+ help
+ Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
+ SCH3116 "Super I/O" chipsets.
+
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-sch311x.
+
+config GPIO_SPEAR_SPICS
+ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ depends on PLAT_SPEAR
+ select GENERIC_IRQ_CHIP
+ help
+ Say yes here to support ST SPEAr SPI Chip Select as GPIO device
+
+config GPIO_STA2X11
+ bool "STA2x11/ConneXt GPIO support"
+ depends on MFD_STA2X11
+ select GENERIC_IRQ_CHIP
+ help
+ Say yes here to support the STA2x11/ConneXt GPIO device.
+ The GPIO module has 128 GPIO pins with alternate functions.
+
+config GPIO_STP_XWAY
+ bool "XWAY STP GPIOs"
+ depends on SOC_XWAY
+ help
+ This enables support for the Serial To Parallel (STP) unit found on
+ XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
+ that can be up to 24 bit. This peripheral is aimed at driving leds.
+ Some of the gpios/leds can be auto updated by the soc with dsl and
+ phy status.
+
+config GPIO_SYSCON
+ tristate "GPIO based on SYSCON"
+ depends on MFD_SYSCON && OF
+ help
+ Say yes here to support GPIO functionality though SYSCON driver.
+
+config GPIO_TB10X
+ bool
+ select GENERIC_IRQ_CHIP
+ select OF_GPIO
+
+config GPIO_TS5500
+ tristate "TS-5500 DIO blocks and compatibles"
+ depends on TS5500 || COMPILE_TEST
+ help
+ This driver supports Digital I/O exposed by pin blocks found on some
+ Technologic Systems platforms. It includes, but is not limited to, 3
+ blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
+ LCD port.
+
+config GPIO_TZ1090
+ bool "Toumaz Xenif TZ1090 GPIO support"
+ depends on SOC_TZ1090
+ select GENERIC_IRQ_CHIP
+ default y
+ help
+ Say yes here to support Toumaz Xenif TZ1090 GPIOs.
+
+config GPIO_TZ1090_PDC
+ bool "Toumaz Xenif TZ1090 PDC GPIO support"
+ depends on SOC_TZ1090
+ default y
+ help
+ Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.
+
+config GPIO_VF610
+ def_bool y
+ depends on ARCH_MXC && SOC_VF610
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support Vybrid vf610 GPIOs.
+
+config GPIO_VR41XX
+ tristate "NEC VR4100 series General-purpose I/O Uint support"
+ depends on CPU_VR41XX
+ help
+ Say yes here to support the NEC VR4100 series General-purpose I/O Uint
+
+config GPIO_VX855
+ tristate "VIA VX855/VX875 GPIO"
+ depends on PCI
+ select MFD_CORE
+ select MFD_VX855
+ help
+ Support access to the VX855/VX875 GPIO lines through the gpio library.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+config GPIO_XGENE
+ bool "APM X-Gene GPIO controller support"
+ depends on ARM64 && OF_GPIO
+ help
+ This driver is to support the GPIO block within the APM X-Gene SoC
+ platform's generic flash controller. The GPIO pins are muxed with
+ the generic flash controller's address and data pins. Say yes
+ here to enable the GFC GPIO functionality.
+
+config GPIO_XGENE_SB
+ tristate "APM X-Gene GPIO standby controller support"
+ depends on ARCH_XGENE && OF_GPIO
+ select GPIO_GENERIC
+ help
+ This driver supports the GPIO block within the APM X-Gene
+ Standby Domain. Say yes here to enable the GPIO functionality.
+
+config GPIO_XILINX
+ tristate "Xilinx GPIO support"
+ depends on OF_GPIO && (PPC || MICROBLAZE || ARCH_ZYNQ || X86)
+ help
+ Say yes here to support the Xilinx FPGA GPIO device
+
+config GPIO_XTENSA
+ bool "Xtensa GPIO32 support"
+ depends on XTENSA
+ depends on HAVE_XTENSA_GPIO32
+ depends on !SMP
+ help
+ Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
+ and EXPSTATE (output) ports
+
+config GPIO_ZEVIO
+ bool "LSI ZEVIO SoC memory mapped GPIOs"
+ depends on ARM && OF_GPIO
+ help
+ Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
+
+config GPIO_ZYNQ
+ tristate "Xilinx Zynq GPIO support"
+ depends on ARCH_ZYNQ
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support Xilinx Zynq GPIO controller.
+
+endmenu
+
+menu "I2C GPIO expanders"
+ depends on I2C
+
+config GPIO_ADP5588
+ tristate "ADP5588 I2C GPIO expander"
+ depends on I2C
+ help
+ This option enables support for 18 GPIOs found
+ on Analog Devices ADP5588 GPIO Expanders.
+
+config GPIO_ADP5588_IRQ
+ bool "Interrupt controller support for ADP5588"
+ depends on GPIO_ADP5588=y
+ help
+ Say yes here to enable the adp5588 to be used as an interrupt
+ controller. It requires the driver to be built in the kernel.
+
+config GPIO_ADNP
+ tristate "Avionic Design N-bit GPIO expander"
+ depends on I2C && OF_GPIO
+ select GPIOLIB_IRQCHIP
+ help
+ This option enables support for N GPIOs found on Avionic Design
+ I2C GPIO expanders. The register space will be extended by powers
+ of two, so the controller will need to accommodate for that. For
+ example: if a controller provides 48 pins, 6 registers will be
+ enough to represent all pins, but the driver will assume a
+ register layout for 64 pins (8 registers).
+
+config GPIO_MAX7300
+ tristate "Maxim MAX7300 GPIO expander"
+ depends on I2C
+ select GPIO_MAX730X
+ help
+ GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
+
+config GPIO_MAX732X
+ tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
+ depends on I2C
+ help
+ Say yes here to support the MAX7319, MAX7320-7327 series of I2C
+ Port Expanders. Each IO port on these chips has a fixed role of
+ Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
+ Input and Output (designed by 'P'). The combinations are listed
+ below:
+
+ 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
+ max7322 (4I4O), max7323 (4P4O)
+
+ 16 bits: max7324 (8I8O), max7325 (8P8O),
+ max7326 (4I12O), max7327 (4P12O)
+
+ Board setup code must specify the model to use, and the start
+ number for these GPIOs.
+
+config GPIO_MAX732X_IRQ
+ bool "Interrupt controller support for MAX732x"
+ depends on GPIO_MAX732X=y
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to enable the max732x to be used as an interrupt
+ controller. It requires the driver to be built in the kernel.
+
+config GPIO_MC9S08DZ60
+ bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
+ depends on I2C=y && MACH_MX35_3DS
+ help
+ Select this to enable the MC9S08DZ60 GPIO driver
+
+config GPIO_PCA953X
+ tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
+ depends on I2C
+ help
+ Say yes here to provide access to several register-oriented
+ SMBus I/O expanders, made mostly by NXP or TI. Compatible
+ models include:
+
+ 4 bits: pca9536, pca9537
+
+ 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
+ pca9556, pca9557, pca9574, tca6408, xra1202
+
+ 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
+ tca6416
+
+ 24 bits: tca6424
+
+ 40 bits: pca9505, pca9698
+
+config GPIO_PCA953X_IRQ
+ bool "Interrupt controller support for PCA953x"
+ depends on GPIO_PCA953X=y
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to enable the pca953x to be used as an interrupt
+ controller. It requires the driver to be built in the kernel.
+
+config GPIO_PCF857X
+ tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
+ depends on I2C
+ select GPIOLIB_IRQCHIP
+ select IRQ_DOMAIN
+ help
+ Say yes here to provide access to most "quasi-bidirectional" I2C
+ GPIO expanders used for additional digital outputs or inputs.
+ Most of these parts are from NXP, though TI is a second source for
+ some of them. Compatible models include:
+
+ 8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
+ pca9670, pca9672, pca9674, pca9674a,
+ max7328, max7329
+
+ 16 bits: pcf8575, pcf8575c, pca8575,
+ pca9671, pca9673, pca9675
+
+ Your board setup code will need to declare the expanders in
+ use, and assign numbers to the GPIOs they expose. Those GPIOs
+ can then be used from drivers and other kernel code, just like
+ other GPIOs, but only accessible from task contexts.
+
+ This driver provides an in-kernel interface to those GPIOs using
+ platform-neutral GPIO calls.
+
+config GPIO_SX150X
+ bool "Semtech SX150x I2C GPIO expander"
+ depends on I2C=y
+ select GPIOLIB_IRQCHIP
+ default n
+ help
+ Say yes here to provide support for Semtech SX150-series I2C
+ GPIO expanders. Compatible models include:
+
+ 8 bits: sx1508q
+ 16 bits: sx1509q
+
+endmenu
+
+menu "MFD GPIO expanders"
+
+config GPIO_ADP5520
+ tristate "GPIO Support for ADP5520 PMIC"
+ depends on PMIC_ADP5520
+ help
+ This option enables support for on-chip GPIO found
+ on Analog Devices ADP5520 PMICs.
+
+config GPIO_ARIZONA
+ tristate "Wolfson Microelectronics Arizona class devices"
+ depends on MFD_ARIZONA
+ help
+ Support for GPIOs on Wolfson Arizona class devices.
+
+config GPIO_CRYSTAL_COVE
+ tristate "GPIO support for Crystal Cove PMIC"
+ depends on INTEL_SOC_PMIC
+ select GPIOLIB_IRQCHIP
+ help
+ Support for GPIO pins on Crystal Cove PMIC.
+
+ Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
+ inside.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-crystalcove.
+
+config GPIO_CS5535
+ tristate "AMD CS5535/CS5536 GPIO support"
+ depends on MFD_CS5535
+ help
+ The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
+ can be used for quite a number of things. The CS5535/6 is found on
+ AMD Geode and Lemote Yeeloong devices.
+
+ If unsure, say N.
+
+config GPIO_DA9052
+ tristate "Dialog DA9052 GPIO"
+ depends on PMIC_DA9052
+ help
+ Say yes here to enable the GPIO driver for the DA9052 chip.
+
+config GPIO_DA9055
+ tristate "Dialog Semiconductor DA9055 GPIO"
+ depends on MFD_DA9055
+ help
+ Say yes here to enable the GPIO driver for the DA9055 chip.
+
+ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+ be controller by this driver.
+
+ If driver is built as a module it will be called gpio-da9055.
+
+config GPIO_DLN2
+ tristate "Diolan DLN2 GPIO support"
+ depends on MFD_DLN2
+ select GPIOLIB_IRQCHIP
+
+ help
+ Select this option to enable GPIO driver for the Diolan DLN2
+ board.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-dln2.
+
+config GPIO_JANZ_TTL
+ tristate "Janz VMOD-TTL Digital IO Module"
+ depends on MFD_JANZ_CMODIO
+ help
+ This enables support for the Janz VMOD-TTL Digital IO module.
+ This driver provides support for driving the pins in output
+ mode only. Input mode is not supported.
+
+config GPIO_KEMPLD
+ tristate "Kontron ETX / COMexpress GPIO"
+ depends on MFD_KEMPLD
+ help
+ This enables support for the PLD GPIO interface on some Kontron ETX
+ and COMexpress (ETXexpress) modules.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-kempld.
+
+config GPIO_LP3943
+ tristate "TI/National Semiconductor LP3943 GPIO expander"
+ depends on MFD_LP3943
+ help
+ GPIO driver for LP3943 MFD.
+ LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
+ Open drain outputs are required for this usage.
+
+config GPIO_MSIC
+ bool "Intel MSIC mixed signal gpio support"
+ depends on MFD_INTEL_MSIC
+ help
+ Enable support for GPIO on intel MSIC controllers found in
+ intel MID devices
+
+config GPIO_PALMAS
+ bool "TI PALMAS series PMICs GPIO"
+ depends on MFD_PALMAS
+ help
+ Select this option to enable GPIO driver for the TI PALMAS
+ series chip family.
+
+config GPIO_RC5T583
+ bool "RICOH RC5T583 GPIO"
+ depends on MFD_RC5T583
+ help
+ Select this option to enable GPIO driver for the Ricoh RC5T583
+ chip family.
+ This driver provides the support for driving/reading the gpio pins
+ of RC5T583 device through standard gpio library.
+
+config GPIO_STMPE
+ bool "STMPE GPIOs"
+ depends on MFD_STMPE
+ depends on OF_GPIO
+ select GPIOLIB_IRQCHIP
+ help
+ This enables support for the GPIOs found on the STMPE I/O
+ Expanders.
+
+config GPIO_TC3589X
+ bool "TC3589X GPIOs"
+ depends on MFD_TC3589X
+ depends on OF_GPIO
+ select GPIOLIB_IRQCHIP
+ help
+ This enables support for the GPIOs found on the TC3589X
+ I/O Expander.
+
+config GPIO_TIMBERDALE
+ bool "Support for timberdale GPIO IP"
+ depends on MFD_TIMBERDALE
+ ---help---
+ Add support for the GPIO IP in the timberdale FPGA.
+
+config GPIO_TPS6586X
+ bool "TPS6586X GPIO"
+ depends on MFD_TPS6586X
+ help
+ Select this option to enable GPIO driver for the TPS6586X
+ chip family.
+
+config GPIO_TPS65910
+ bool "TPS65910 GPIO"
+ depends on MFD_TPS65910
+ help
+ Select this option to enable GPIO driver for the TPS65910
+ chip family.
+
+config GPIO_TPS65912
+ tristate "TI TPS65912 GPIO"
+ depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+ help
+ This driver supports TPS65912 gpio chip
+
+config GPIO_TWL4030
+ tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
+ depends on TWL4030_CORE
+ help
+ Say yes here to access the GPIO signals of various multi-function
+ power management chips from Texas Instruments.
+
+config GPIO_TWL6040
+ tristate "TWL6040 GPO"
+ depends on TWL6040_CORE
+ help
+ Say yes here to access the GPO signals of twl6040
+ audio chip from Texas Instruments.
+
+config GPIO_UCB1400
+ tristate "Philips UCB1400 GPIO"
+ depends on UCB1400_CORE
+ help
+ This enables support for the Philips UCB1400 GPIO pins.
+ The UCB1400 is an AC97 audio codec.
+
+config GPIO_WM831X
+ tristate "WM831x GPIOs"
+ depends on MFD_WM831X
+ help
+ Say yes here to access the GPIO signals of WM831x power management
+ chips from Wolfson Microelectronics.
+
+config GPIO_WM8350
+ tristate "WM8350 GPIOs"
+ depends on MFD_WM8350
+ help
+ Say yes here to access the GPIO signals of WM8350 power management
+ chips from Wolfson Microelectronics.
+
+config GPIO_WM8994
+ tristate "WM8994 GPIOs"
+ depends on MFD_WM8994
+ help
+ Say yes here to access the GPIO signals of WM8994 audio hub
+ CODECs from Wolfson Microelectronics.
+
+endmenu
+
+menu "PCI GPIO expanders"
+ depends on PCI
+
+config GPIO_AMD8111
+ tristate "AMD 8111 GPIO driver"
+ depends on PCI
+ help
+ The AMD 8111 south bridge contains 32 GPIO pins which can be used.
+
+ Note, that usually system firmware/ACPI handles GPIO pins on their
+ own and users might easily break their systems with uncarefull usage
+ of this driver!
+
+ If unsure, say N
+
+config GPIO_BT8XX
+ tristate "BT8XX GPIO abuser"
+ depends on PCI && VIDEO_BT848=n
+ help
+ The BT8xx frame grabber chip has 24 GPIO pins that can be abused
+ as a cheap PCI GPIO card.
+
+ This chip can be found on Miro, Hauppauge and STB TV-cards.
+
+ The card needs to be physically altered for using it as a
+ GPIO card. For more information on how to build a GPIO card
+ from a BT8xx TV card, see the documentation file at
+ Documentation/bt8xxgpio.txt
+
+ If unsure, say N.
+
+config GPIO_INTEL_MID
+ bool "Intel Mid GPIO support"
+ depends on PCI && X86
+ select GPIOLIB_IRQCHIP
+ help
+ Say Y here to support Intel Mid GPIO.
+
+config GPIO_ML_IOH
+ tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
+ depends on PCI
+ select GENERIC_IRQ_CHIP
+ help
+ ML7213 is companion chip for Intel Atom E6xx series.
+ This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
+ Hub) which is for IVI(In-Vehicle Infotainment) use.
+ This driver can access the IOH's GPIO device.
+
+config GPIO_PCH
+ tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
+ depends on PCI && (X86_32 || COMPILE_TEST)
+ select GENERIC_IRQ_CHIP
+ help
+ This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
+ which is an IOH(Input/Output Hub) for x86 embedded processor.
+ This driver can access PCH GPIO device.
+
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7223 and ML7831.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7831 IOH is for general purpose use.
+ ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
+config GPIO_RDC321X
+ tristate "RDC R-321x GPIO support"
+ depends on PCI
+ select MFD_CORE
+ select MFD_RDC321X
+ help
+ Support for the RDC R321x SoC GPIOs over southbridge
+ PCI configuration space.
+
+config GPIO_SODAVILLE
+ bool "Intel Sodaville GPIO support"
+ depends on X86 && PCI && OF
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+ help
+ Say Y here to support Intel Sodaville GPIO.
+
+endmenu
+
+menu "SPI GPIO expanders"
+ depends on SPI_MASTER
+
+config GPIO_74X164
+ tristate "74x164 serial-in/parallel-out 8-bits shift register"
+ depends on SPI_MASTER && OF
+ help
+ Driver for 74x164 compatible serial-in/parallel-out 8-outputs
+ shift registers. This driver can be used to provide access
+ to more gpio outputs.
+
+config GPIO_MAX7301
+ tristate "Maxim MAX7301 GPIO expander"
+ depends on SPI_MASTER
+ select GPIO_MAX730X
+ help
+ GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
+
+config GPIO_MCP23S08
+ tristate "Microchip MCP23xxx I/O expander"
+ depends on (SPI_MASTER && !I2C) || I2C
+ help
+ SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
+ I/O expanders.
+ This provides a GPIO interface supporting inputs and outputs.
+ The I2C versions of the chips can be used as interrupt-controller.
+
+config GPIO_MC33880
+ tristate "Freescale MC33880 high-side/low-side switch"
+ depends on SPI_MASTER
+ help
+ SPI driver for Freescale MC33880 high-side/low-side switch.
+ This provides GPIO interface supporting inputs and outputs.
+
+endmenu
+
+menu "USB GPIO expanders"
+ depends on USB
+
+config GPIO_VIPERBOARD
+ tristate "Viperboard GPIO a & b support"
+ depends on MFD_VIPERBOARD && USB
+ help
+ Say yes here to access the GPIO signals of Nano River
+ Technologies Viperboard. There are two GPIO chips on the
+ board: gpioa and gpiob.
+ See viperboard API specification and Nano
+ River Tech's viperboard.h for detailed meaning
+ of the module parameters.
+
+endmenu
+
+endif