summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/firewire/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/firewire/Kconfig')
-rw-r--r--kernel/drivers/firewire/Kconfig83
1 files changed, 83 insertions, 0 deletions
diff --git a/kernel/drivers/firewire/Kconfig b/kernel/drivers/firewire/Kconfig
new file mode 100644
index 000000000..145974f96
--- /dev/null
+++ b/kernel/drivers/firewire/Kconfig
@@ -0,0 +1,83 @@
+menu "IEEE 1394 (FireWire) support"
+ depends on HAS_DMA
+ depends on PCI || COMPILE_TEST
+ # firewire-core does not depend on PCI but is
+ # not useful without PCI controller driver
+
+config FIREWIRE
+ tristate "FireWire driver stack"
+ select CRC_ITU_T
+ help
+ This is the new-generation IEEE 1394 (FireWire) driver stack
+ a.k.a. Juju, a new implementation designed for robustness and
+ simplicity.
+ See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+ for information about migration from the older Linux 1394 stack
+ to the new driver stack.
+
+ To compile this driver as a module, say M here: the module will be
+ called firewire-core.
+
+config FIREWIRE_OHCI
+ tristate "OHCI-1394 controllers"
+ depends on PCI && FIREWIRE && MMU
+ help
+ Enable this driver if you have a FireWire controller based
+ on the OHCI specification. For all practical purposes, this
+ is the only chipset in use, so say Y here.
+
+ To compile this driver as a module, say M here: The module will be
+ called firewire-ohci.
+
+config FIREWIRE_SBP2
+ tristate "Storage devices (SBP-2 protocol)"
+ depends on FIREWIRE && SCSI
+ help
+ This option enables you to use SBP-2 devices connected to a
+ FireWire bus. SBP-2 devices include storage devices like
+ harddisks and DVD drives, also some other FireWire devices
+ like scanners.
+
+ To compile this driver as a module, say M here: The module will be
+ called firewire-sbp2.
+
+ You should also enable support for disks, CD-ROMs, etc. in the SCSI
+ configuration section.
+
+config FIREWIRE_NET
+ tristate "IP networking over 1394"
+ depends on FIREWIRE && INET
+ help
+ This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity
+ with other implementations of RFC 2734/3146 as found on several
+ operating systems. Multicast support is currently limited.
+
+ To compile this driver as a module, say M here: The module will be
+ called firewire-net.
+
+config FIREWIRE_NOSY
+ tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
+ depends on PCI
+ help
+ Nosy is an IEEE 1394 packet sniffer that is used for protocol
+ analysis and in development of IEEE 1394 drivers, applications,
+ or firmwares.
+
+ This driver lets you use a Texas Instruments PCILynx 1394 to PCI
+ link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
+ PCILynx is a nowadays very rare IEEE 1394 controller which is
+ not OHCI 1394 compliant.
+
+ The following cards are known to be based on PCILynx or PCILynx-2:
+ IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
+ (PCI card), Newer Technology FireWire 2 Go (CardBus card),
+ Apple Power Mac G3 blue & white and G4 with PCI graphics
+ (onboard controller).
+
+ To compile this driver as a module, say M here: The module will be
+ called nosy. Source code of a userspace interface to nosy, called
+ nosy-dump, can be found in tools/firewire/ of the kernel sources.
+
+ If unsure, say N.
+
+endmenu