summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/edac/i82875p_edac.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/edac/i82875p_edac.c')
-rw-r--r--kernel/drivers/edac/i82875p_edac.c602
1 files changed, 602 insertions, 0 deletions
diff --git a/kernel/drivers/edac/i82875p_edac.c b/kernel/drivers/edac/i82875p_edac.c
new file mode 100644
index 000000000..c26a513f8
--- /dev/null
+++ b/kernel/drivers/edac/i82875p_edac.c
@@ -0,0 +1,602 @@
+/*
+ * Intel D82875P Memory Controller kernel module
+ * (C) 2003 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Thayne Harbaugh
+ * Contributors:
+ * Wang Zhenyu at intel.com
+ *
+ * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_core.h"
+
+#define I82875P_REVISION " Ver: 2.0.2"
+#define EDAC_MOD_STR "i82875p_edac"
+
+#define i82875p_printk(level, fmt, arg...) \
+ edac_printk(level, "i82875p", fmt, ##arg)
+
+#define i82875p_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_82875_0
+#define PCI_DEVICE_ID_INTEL_82875_0 0x2578
+#endif /* PCI_DEVICE_ID_INTEL_82875_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_82875_6
+#define PCI_DEVICE_ID_INTEL_82875_6 0x257e
+#endif /* PCI_DEVICE_ID_INTEL_82875_6 */
+
+/* four csrows in dual channel, eight in single channel */
+#define I82875P_NR_DIMMS 8
+#define I82875P_NR_CSROWS(nr_chans) (I82875P_NR_DIMMS / (nr_chans))
+
+/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */
+#define I82875P_EAP 0x58 /* Error Address Pointer (32b)
+ *
+ * 31:12 block address
+ * 11:0 reserved
+ */
+
+#define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b)
+ *
+ * 7:0 DRAM ECC Syndrome
+ */
+
+#define I82875P_DES 0x5d /* DRAM Error Status (8b)
+ *
+ * 7:1 reserved
+ * 0 Error channel 0/1
+ */
+
+#define I82875P_ERRSTS 0xc8 /* Error Status Register (16b)
+ *
+ * 15:10 reserved
+ * 9 non-DRAM lock error (ndlock)
+ * 8 Sftwr Generated SMI
+ * 7 ECC UE
+ * 6 reserved
+ * 5 MCH detects unimplemented cycle
+ * 4 AGP access outside GA
+ * 3 Invalid AGP access
+ * 2 Invalid GA translation table
+ * 1 Unsupported AGP command
+ * 0 ECC CE
+ */
+
+#define I82875P_ERRCMD 0xca /* Error Command (16b)
+ *
+ * 15:10 reserved
+ * 9 SERR on non-DRAM lock
+ * 8 SERR on ECC UE
+ * 7 SERR on ECC CE
+ * 6 target abort on high exception
+ * 5 detect unimplemented cyc
+ * 4 AGP access outside of GA
+ * 3 SERR on invalid AGP access
+ * 2 invalid translation table
+ * 1 SERR on unsupported AGP command
+ * 0 reserved
+ */
+
+/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */
+#define I82875P_PCICMD6 0x04 /* PCI Command Register (16b)
+ *
+ * 15:10 reserved
+ * 9 fast back-to-back - ro 0
+ * 8 SERR enable - ro 0
+ * 7 addr/data stepping - ro 0
+ * 6 parity err enable - ro 0
+ * 5 VGA palette snoop - ro 0
+ * 4 mem wr & invalidate - ro 0
+ * 3 special cycle - ro 0
+ * 2 bus master - ro 0
+ * 1 mem access dev6 - 0(dis),1(en)
+ * 0 IO access dev3 - 0(dis),1(en)
+ */
+
+#define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b)
+ *
+ * 31:12 mem base addr [31:12]
+ * 11:4 address mask - ro 0
+ * 3 prefetchable - ro 0(non),1(pre)
+ * 2:1 mem type - ro 0
+ * 0 mem space - ro 0
+ */
+
+/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */
+
+#define I82875P_DRB_SHIFT 26 /* 64MiB grain */
+#define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8)
+ *
+ * 7 reserved
+ * 6:0 64MiB row boundary addr
+ */
+
+#define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8)
+ *
+ * 7 reserved
+ * 6:4 row attr row 1
+ * 3 reserved
+ * 2:0 row attr row 0
+ *
+ * 000 = 4KiB
+ * 001 = 8KiB
+ * 010 = 16KiB
+ * 011 = 32KiB
+ */
+
+#define I82875P_DRC 0x68 /* DRAM Controller Mode (32b)
+ *
+ * 31:30 reserved
+ * 29 init complete
+ * 28:23 reserved
+ * 22:21 nr chan 00=1,01=2
+ * 20 reserved
+ * 19:18 Data Integ Mode 00=none,01=ecc
+ * 17:11 reserved
+ * 10:8 refresh mode
+ * 7 reserved
+ * 6:4 mode select
+ * 3:2 reserved
+ * 1:0 DRAM type 01=DDR
+ */
+
+enum i82875p_chips {
+ I82875P = 0,
+};
+
+struct i82875p_pvt {
+ struct pci_dev *ovrfl_pdev;
+ void __iomem *ovrfl_window;
+};
+
+struct i82875p_dev_info {
+ const char *ctl_name;
+};
+
+struct i82875p_error_info {
+ u16 errsts;
+ u32 eap;
+ u8 des;
+ u8 derrsyn;
+ u16 errsts2;
+};
+
+static const struct i82875p_dev_info i82875p_devs[] = {
+ [I82875P] = {
+ .ctl_name = "i82875p"},
+};
+
+static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has
+ * already registered driver
+ */
+
+static struct edac_pci_ctl_info *i82875p_pci;
+
+static void i82875p_get_error_info(struct mem_ctl_info *mci,
+ struct i82875p_error_info *info)
+{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->pdev);
+
+ /*
+ * This is a mess because there is no atomic way to read all the
+ * registers at once and the registers can transition from CE being
+ * overwritten by UE.
+ */
+ pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts);
+
+ if (!(info->errsts & 0x0081))
+ return;
+
+ pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
+ pci_read_config_byte(pdev, I82875P_DES, &info->des);
+ pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
+ pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2);
+
+ /*
+ * If the error is the same then we can for both reads then
+ * the first set of reads is valid. If there is a change then
+ * there is a CE no info and the second set of reads is valid
+ * and should be UE info.
+ */
+ if ((info->errsts ^ info->errsts2) & 0x0081) {
+ pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
+ pci_read_config_byte(pdev, I82875P_DES, &info->des);
+ pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
+ }
+
+ pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081);
+}
+
+static int i82875p_process_error_info(struct mem_ctl_info *mci,
+ struct i82875p_error_info *info,
+ int handle_errors)
+{
+ int row, multi_chan;
+
+ multi_chan = mci->csrows[0]->nr_channels - 1;
+
+ if (!(info->errsts & 0x0081))
+ return 0;
+
+ if (!handle_errors)
+ return 1;
+
+ if ((info->errsts ^ info->errsts2) & 0x0081) {
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+ -1, -1, -1,
+ "UE overwrote CE", "");
+ info->errsts = info->errsts2;
+ }
+
+ info->eap >>= PAGE_SHIFT;
+ row = edac_mc_find_csrow_by_page(mci, info->eap);
+
+ if (info->errsts & 0x0080)
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+ info->eap, 0, 0,
+ row, -1, -1,
+ "i82875p UE", "");
+ else
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+ info->eap, 0, info->derrsyn,
+ row, multi_chan ? (info->des & 0x1) : 0,
+ -1, "i82875p CE", "");
+
+ return 1;
+}
+
+static void i82875p_check(struct mem_ctl_info *mci)
+{
+ struct i82875p_error_info info;
+
+ edac_dbg(1, "MC%d\n", mci->mc_idx);
+ i82875p_get_error_info(mci, &info);
+ i82875p_process_error_info(mci, &info, 1);
+}
+
+/* Return 0 on success or 1 on failure. */
+static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
+ struct pci_dev **ovrfl_pdev,
+ void __iomem **ovrfl_window)
+{
+ struct pci_dev *dev;
+ void __iomem *window;
+
+ *ovrfl_pdev = NULL;
+ *ovrfl_window = NULL;
+ dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
+
+ if (dev == NULL) {
+ /* Intel tells BIOS developers to hide device 6 which
+ * configures the overflow device access containing
+ * the DRBs - this is where we expose device 6.
+ * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
+ */
+ pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
+ dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
+
+ if (dev == NULL)
+ return 1;
+
+ pci_bus_assign_resources(dev->bus);
+ pci_bus_add_device(dev);
+ }
+
+ *ovrfl_pdev = dev;
+
+ if (pci_enable_device(dev)) {
+ i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow "
+ "device\n", __func__);
+ return 1;
+ }
+
+ if (pci_request_regions(dev, pci_name(dev))) {
+#ifdef CORRECT_BIOS
+ goto fail0;
+#endif
+ }
+
+ /* cache is irrelevant for PCI bus reads/writes */
+ window = pci_ioremap_bar(dev, 0);
+ if (window == NULL) {
+ i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
+ __func__);
+ goto fail1;
+ }
+
+ *ovrfl_window = window;
+ return 0;
+
+fail1:
+ pci_release_regions(dev);
+
+#ifdef CORRECT_BIOS
+fail0:
+ pci_disable_device(dev);
+#endif
+ /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
+ return 1;
+}
+
+/* Return 1 if dual channel mode is active. Else return 0. */
+static inline int dual_channel_active(u32 drc)
+{
+ return (drc >> 21) & 0x1;
+}
+
+static void i82875p_init_csrows(struct mem_ctl_info *mci,
+ struct pci_dev *pdev,
+ void __iomem * ovrfl_window, u32 drc)
+{
+ struct csrow_info *csrow;
+ struct dimm_info *dimm;
+ unsigned nr_chans = dual_channel_active(drc) + 1;
+ unsigned long last_cumul_size;
+ u8 value;
+ u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
+ u32 cumul_size, nr_pages;
+ int index, j;
+
+ drc_ddim = (drc >> 18) & 0x1;
+ last_cumul_size = 0;
+
+ /* The dram row boundary (DRB) reg values are boundary address
+ * for each DRAM row with a granularity of 32 or 64MB (single/dual
+ * channel operation). DRB regs are cumulative; therefore DRB7 will
+ * contain the total memory contained in all eight rows.
+ */
+
+ for (index = 0; index < mci->nr_csrows; index++) {
+ csrow = mci->csrows[index];
+
+ value = readb(ovrfl_window + I82875P_DRB + index);
+ cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
+ edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
+ if (cumul_size == last_cumul_size)
+ continue; /* not populated */
+
+ csrow->first_page = last_cumul_size;
+ csrow->last_page = cumul_size - 1;
+ nr_pages = cumul_size - last_cumul_size;
+ last_cumul_size = cumul_size;
+
+ for (j = 0; j < nr_chans; j++) {
+ dimm = csrow->channels[j]->dimm;
+
+ dimm->nr_pages = nr_pages / nr_chans;
+ dimm->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */
+ dimm->mtype = MEM_DDR;
+ dimm->dtype = DEV_UNKNOWN;
+ dimm->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
+ }
+ }
+}
+
+static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc = -ENODEV;
+ struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[2];
+ struct i82875p_pvt *pvt;
+ struct pci_dev *ovrfl_pdev;
+ void __iomem *ovrfl_window;
+ u32 drc;
+ u32 nr_chans;
+ struct i82875p_error_info discard;
+
+ edac_dbg(0, "\n");
+
+ if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window))
+ return -ENODEV;
+ drc = readl(ovrfl_window + I82875P_DRC);
+ nr_chans = dual_channel_active(drc) + 1;
+
+ layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+ layers[0].size = I82875P_NR_CSROWS(nr_chans);
+ layers[0].is_virt_csrow = true;
+ layers[1].type = EDAC_MC_LAYER_CHANNEL;
+ layers[1].size = nr_chans;
+ layers[1].is_virt_csrow = false;
+ mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+ if (!mci) {
+ rc = -ENOMEM;
+ goto fail0;
+ }
+
+ edac_dbg(3, "init mci\n");
+ mci->pdev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_DDR;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_UNKNOWN;
+ mci->mod_name = EDAC_MOD_STR;
+ mci->mod_ver = I82875P_REVISION;
+ mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
+ mci->dev_name = pci_name(pdev);
+ mci->edac_check = i82875p_check;
+ mci->ctl_page_to_phys = NULL;
+ edac_dbg(3, "init pvt\n");
+ pvt = (struct i82875p_pvt *)mci->pvt_info;
+ pvt->ovrfl_pdev = ovrfl_pdev;
+ pvt->ovrfl_window = ovrfl_window;
+ i82875p_init_csrows(mci, pdev, ovrfl_window, drc);
+ i82875p_get_error_info(mci, &discard); /* clear counters */
+
+ /* Here we assume that we will never see multiple instances of this
+ * type of memory controller. The ID is therefore hardcoded to 0.
+ */
+ if (edac_mc_add_mc(mci)) {
+ edac_dbg(3, "failed edac_mc_add_mc()\n");
+ goto fail1;
+ }
+
+ /* allocating generic PCI control info */
+ i82875p_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+ if (!i82875p_pci) {
+ printk(KERN_WARNING
+ "%s(): Unable to create PCI control\n",
+ __func__);
+ printk(KERN_WARNING
+ "%s(): PCI error report via EDAC not setup\n",
+ __func__);
+ }
+
+ /* get this far and it's successful */
+ edac_dbg(3, "success\n");
+ return 0;
+
+fail1:
+ edac_mc_free(mci);
+
+fail0:
+ iounmap(ovrfl_window);
+ pci_release_regions(ovrfl_pdev);
+
+ pci_disable_device(ovrfl_pdev);
+ /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
+ return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i82875p_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc;
+
+ edac_dbg(0, "\n");
+ i82875p_printk(KERN_INFO, "i82875p init one\n");
+
+ if (pci_enable_device(pdev) < 0)
+ return -EIO;
+
+ rc = i82875p_probe1(pdev, ent->driver_data);
+
+ if (mci_pdev == NULL)
+ mci_pdev = pci_dev_get(pdev);
+
+ return rc;
+}
+
+static void i82875p_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct i82875p_pvt *pvt = NULL;
+
+ edac_dbg(0, "\n");
+
+ if (i82875p_pci)
+ edac_pci_release_generic_ctl(i82875p_pci);
+
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+ return;
+
+ pvt = (struct i82875p_pvt *)mci->pvt_info;
+
+ if (pvt->ovrfl_window)
+ iounmap(pvt->ovrfl_window);
+
+ if (pvt->ovrfl_pdev) {
+#ifdef CORRECT_BIOS
+ pci_release_regions(pvt->ovrfl_pdev);
+#endif /*CORRECT_BIOS */
+ pci_disable_device(pvt->ovrfl_pdev);
+ pci_dev_put(pvt->ovrfl_pdev);
+ }
+
+ edac_mc_free(mci);
+}
+
+static const struct pci_device_id i82875p_pci_tbl[] = {
+ {
+ PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ I82875P},
+ {
+ 0,
+ } /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl);
+
+static struct pci_driver i82875p_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = i82875p_init_one,
+ .remove = i82875p_remove_one,
+ .id_table = i82875p_pci_tbl,
+};
+
+static int __init i82875p_init(void)
+{
+ int pci_rc;
+
+ edac_dbg(3, "\n");
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ pci_rc = pci_register_driver(&i82875p_driver);
+
+ if (pci_rc < 0)
+ goto fail0;
+
+ if (mci_pdev == NULL) {
+ mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82875_0, NULL);
+
+ if (!mci_pdev) {
+ edac_dbg(0, "875p pci_get_device fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+
+ pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);
+
+ if (pci_rc < 0) {
+ edac_dbg(0, "875p init fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+ }
+
+ return 0;
+
+fail1:
+ pci_unregister_driver(&i82875p_driver);
+
+fail0:
+ pci_dev_put(mci_pdev);
+ return pci_rc;
+}
+
+static void __exit i82875p_exit(void)
+{
+ edac_dbg(3, "\n");
+
+ i82875p_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+
+ pci_unregister_driver(&i82875p_driver);
+
+}
+
+module_init(i82875p_init);
+module_exit(i82875p_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
+MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");