summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/dma/pl330.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/dma/pl330.c')
-rw-r--r--kernel/drivers/dma/pl330.c3009
1 files changed, 3009 insertions, 0 deletions
diff --git a/kernel/drivers/dma/pl330.c b/kernel/drivers/dma/pl330.c
new file mode 100644
index 000000000..340f9e607
--- /dev/null
+++ b/kernel/drivers/dma/pl330.c
@@ -0,0 +1,3009 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+#include <linux/scatterlist.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
+#include "dmaengine.h"
+#define PL330_MAX_CHAN 8
+#define PL330_MAX_IRQS 32
+#define PL330_MAX_PERI 32
+
+enum pl330_cachectrl {
+ CCTRL0, /* Noncacheable and nonbufferable */
+ CCTRL1, /* Bufferable only */
+ CCTRL2, /* Cacheable, but do not allocate */
+ CCTRL3, /* Cacheable and bufferable, but do not allocate */
+ INVALID1, /* AWCACHE = 0x1000 */
+ INVALID2,
+ CCTRL6, /* Cacheable write-through, allocate on writes only */
+ CCTRL7, /* Cacheable write-back, allocate on writes only */
+};
+
+enum pl330_byteswap {
+ SWAP_NO,
+ SWAP_2,
+ SWAP_4,
+ SWAP_8,
+ SWAP_16,
+};
+
+/* Register and Bit field Definitions */
+#define DS 0x0
+#define DS_ST_STOP 0x0
+#define DS_ST_EXEC 0x1
+#define DS_ST_CMISS 0x2
+#define DS_ST_UPDTPC 0x3
+#define DS_ST_WFE 0x4
+#define DS_ST_ATBRR 0x5
+#define DS_ST_QBUSY 0x6
+#define DS_ST_WFP 0x7
+#define DS_ST_KILL 0x8
+#define DS_ST_CMPLT 0x9
+#define DS_ST_FLTCMP 0xe
+#define DS_ST_FAULT 0xf
+
+#define DPC 0x4
+#define INTEN 0x20
+#define ES 0x24
+#define INTSTATUS 0x28
+#define INTCLR 0x2c
+#define FSM 0x30
+#define FSC 0x34
+#define FTM 0x38
+
+#define _FTC 0x40
+#define FTC(n) (_FTC + (n)*0x4)
+
+#define _CS 0x100
+#define CS(n) (_CS + (n)*0x8)
+#define CS_CNS (1 << 21)
+
+#define _CPC 0x104
+#define CPC(n) (_CPC + (n)*0x8)
+
+#define _SA 0x400
+#define SA(n) (_SA + (n)*0x20)
+
+#define _DA 0x404
+#define DA(n) (_DA + (n)*0x20)
+
+#define _CC 0x408
+#define CC(n) (_CC + (n)*0x20)
+
+#define CC_SRCINC (1 << 0)
+#define CC_DSTINC (1 << 14)
+#define CC_SRCPRI (1 << 8)
+#define CC_DSTPRI (1 << 22)
+#define CC_SRCNS (1 << 9)
+#define CC_DSTNS (1 << 23)
+#define CC_SRCIA (1 << 10)
+#define CC_DSTIA (1 << 24)
+#define CC_SRCBRSTLEN_SHFT 4
+#define CC_DSTBRSTLEN_SHFT 18
+#define CC_SRCBRSTSIZE_SHFT 1
+#define CC_DSTBRSTSIZE_SHFT 15
+#define CC_SRCCCTRL_SHFT 11
+#define CC_SRCCCTRL_MASK 0x7
+#define CC_DSTCCTRL_SHFT 25
+#define CC_DRCCCTRL_MASK 0x7
+#define CC_SWAP_SHFT 28
+
+#define _LC0 0x40c
+#define LC0(n) (_LC0 + (n)*0x20)
+
+#define _LC1 0x410
+#define LC1(n) (_LC1 + (n)*0x20)
+
+#define DBGSTATUS 0xd00
+#define DBG_BUSY (1 << 0)
+
+#define DBGCMD 0xd04
+#define DBGINST0 0xd08
+#define DBGINST1 0xd0c
+
+#define CR0 0xe00
+#define CR1 0xe04
+#define CR2 0xe08
+#define CR3 0xe0c
+#define CR4 0xe10
+#define CRD 0xe14
+
+#define PERIPH_ID 0xfe0
+#define PERIPH_REV_SHIFT 20
+#define PERIPH_REV_MASK 0xf
+#define PERIPH_REV_R0P0 0
+#define PERIPH_REV_R1P0 1
+#define PERIPH_REV_R1P1 2
+
+#define CR0_PERIPH_REQ_SET (1 << 0)
+#define CR0_BOOT_EN_SET (1 << 1)
+#define CR0_BOOT_MAN_NS (1 << 2)
+#define CR0_NUM_CHANS_SHIFT 4
+#define CR0_NUM_CHANS_MASK 0x7
+#define CR0_NUM_PERIPH_SHIFT 12
+#define CR0_NUM_PERIPH_MASK 0x1f
+#define CR0_NUM_EVENTS_SHIFT 17
+#define CR0_NUM_EVENTS_MASK 0x1f
+
+#define CR1_ICACHE_LEN_SHIFT 0
+#define CR1_ICACHE_LEN_MASK 0x7
+#define CR1_NUM_ICACHELINES_SHIFT 4
+#define CR1_NUM_ICACHELINES_MASK 0xf
+
+#define CRD_DATA_WIDTH_SHIFT 0
+#define CRD_DATA_WIDTH_MASK 0x7
+#define CRD_WR_CAP_SHIFT 4
+#define CRD_WR_CAP_MASK 0x7
+#define CRD_WR_Q_DEP_SHIFT 8
+#define CRD_WR_Q_DEP_MASK 0xf
+#define CRD_RD_CAP_SHIFT 12
+#define CRD_RD_CAP_MASK 0x7
+#define CRD_RD_Q_DEP_SHIFT 16
+#define CRD_RD_Q_DEP_MASK 0xf
+#define CRD_DATA_BUFF_SHIFT 20
+#define CRD_DATA_BUFF_MASK 0x3ff
+
+#define PART 0x330
+#define DESIGNER 0x41
+#define REVISION 0x0
+#define INTEG_CFG 0x0
+#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
+
+#define PL330_STATE_STOPPED (1 << 0)
+#define PL330_STATE_EXECUTING (1 << 1)
+#define PL330_STATE_WFE (1 << 2)
+#define PL330_STATE_FAULTING (1 << 3)
+#define PL330_STATE_COMPLETING (1 << 4)
+#define PL330_STATE_WFP (1 << 5)
+#define PL330_STATE_KILLING (1 << 6)
+#define PL330_STATE_FAULT_COMPLETING (1 << 7)
+#define PL330_STATE_CACHEMISS (1 << 8)
+#define PL330_STATE_UPDTPC (1 << 9)
+#define PL330_STATE_ATBARRIER (1 << 10)
+#define PL330_STATE_QUEUEBUSY (1 << 11)
+#define PL330_STATE_INVALID (1 << 15)
+
+#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+ | PL330_STATE_WFE | PL330_STATE_FAULTING)
+
+#define CMD_DMAADDH 0x54
+#define CMD_DMAEND 0x00
+#define CMD_DMAFLUSHP 0x35
+#define CMD_DMAGO 0xa0
+#define CMD_DMALD 0x04
+#define CMD_DMALDP 0x25
+#define CMD_DMALP 0x20
+#define CMD_DMALPEND 0x28
+#define CMD_DMAKILL 0x01
+#define CMD_DMAMOV 0xbc
+#define CMD_DMANOP 0x18
+#define CMD_DMARMB 0x12
+#define CMD_DMASEV 0x34
+#define CMD_DMAST 0x08
+#define CMD_DMASTP 0x29
+#define CMD_DMASTZ 0x0c
+#define CMD_DMAWFE 0x36
+#define CMD_DMAWFP 0x30
+#define CMD_DMAWMB 0x13
+
+#define SZ_DMAADDH 3
+#define SZ_DMAEND 1
+#define SZ_DMAFLUSHP 2
+#define SZ_DMALD 1
+#define SZ_DMALDP 2
+#define SZ_DMALP 2
+#define SZ_DMALPEND 2
+#define SZ_DMAKILL 1
+#define SZ_DMAMOV 6
+#define SZ_DMANOP 1
+#define SZ_DMARMB 1
+#define SZ_DMASEV 2
+#define SZ_DMAST 1
+#define SZ_DMASTP 2
+#define SZ_DMASTZ 1
+#define SZ_DMAWFE 2
+#define SZ_DMAWFP 2
+#define SZ_DMAWMB 1
+#define SZ_DMAGO 6
+
+#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+
+#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+
+/*
+ * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+ * at 1byte/burst for P<->M and M<->M respectively.
+ * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+ * should be enough for P<->M and M<->M respectively.
+ */
+#define MCODE_BUFF_PER_REQ 256
+
+/* Use this _only_ to wait on transient states */
+#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
+
+#ifdef PL330_DEBUG_MCGEN
+static unsigned cmd_line;
+#define PL330_DBGCMD_DUMP(off, x...) do { \
+ printk("%x:", cmd_line); \
+ printk(x); \
+ cmd_line += off; \
+ } while (0)
+#define PL330_DBGMC_START(addr) (cmd_line = addr)
+#else
+#define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
+#define PL330_DBGMC_START(addr) do {} while (0)
+#endif
+
+/* The number of default descriptors */
+
+#define NR_DEFAULT_DESC 16
+
+/* Delay for runtime PM autosuspend, ms */
+#define PL330_AUTOSUSPEND_DELAY 20
+
+/* Populated by the PL330 core driver for DMA API driver's info */
+struct pl330_config {
+ u32 periph_id;
+#define DMAC_MODE_NS (1 << 0)
+ unsigned int mode;
+ unsigned int data_bus_width:10; /* In number of bits */
+ unsigned int data_buf_dep:11;
+ unsigned int num_chan:4;
+ unsigned int num_peri:6;
+ u32 peri_ns;
+ unsigned int num_events:6;
+ u32 irq_ns;
+};
+
+/**
+ * Request Configuration.
+ * The PL330 core does not modify this and uses the last
+ * working configuration if the request doesn't provide any.
+ *
+ * The Client may want to provide this info only for the
+ * first request and a request with new settings.
+ */
+struct pl330_reqcfg {
+ /* Address Incrementing */
+ unsigned dst_inc:1;
+ unsigned src_inc:1;
+
+ /*
+ * For now, the SRC & DST protection levels
+ * and burst size/length are assumed same.
+ */
+ bool nonsecure;
+ bool privileged;
+ bool insnaccess;
+ unsigned brst_len:5;
+ unsigned brst_size:3; /* in power of 2 */
+
+ enum pl330_cachectrl dcctl;
+ enum pl330_cachectrl scctl;
+ enum pl330_byteswap swap;
+ struct pl330_config *pcfg;
+};
+
+/*
+ * One cycle of DMAC operation.
+ * There may be more than one xfer in a request.
+ */
+struct pl330_xfer {
+ u32 src_addr;
+ u32 dst_addr;
+ /* Size to xfer */
+ u32 bytes;
+};
+
+/* The xfer callbacks are made with one of these arguments. */
+enum pl330_op_err {
+ /* The all xfers in the request were success. */
+ PL330_ERR_NONE,
+ /* If req aborted due to global error. */
+ PL330_ERR_ABORT,
+ /* If req failed due to problem with Channel. */
+ PL330_ERR_FAIL,
+};
+
+enum dmamov_dst {
+ SAR = 0,
+ CCR,
+ DAR,
+};
+
+enum pl330_dst {
+ SRC = 0,
+ DST,
+};
+
+enum pl330_cond {
+ SINGLE,
+ BURST,
+ ALWAYS,
+};
+
+struct dma_pl330_desc;
+
+struct _pl330_req {
+ u32 mc_bus;
+ void *mc_cpu;
+ struct dma_pl330_desc *desc;
+};
+
+/* ToBeDone for tasklet */
+struct _pl330_tbd {
+ bool reset_dmac;
+ bool reset_mngr;
+ u8 reset_chan;
+};
+
+/* A DMAC Thread */
+struct pl330_thread {
+ u8 id;
+ int ev;
+ /* If the channel is not yet acquired by any client */
+ bool free;
+ /* Parent DMAC */
+ struct pl330_dmac *dmac;
+ /* Only two at a time */
+ struct _pl330_req req[2];
+ /* Index of the last enqueued request */
+ unsigned lstenq;
+ /* Index of the last submitted request or -1 if the DMA is stopped */
+ int req_running;
+};
+
+enum pl330_dmac_state {
+ UNINIT,
+ INIT,
+ DYING,
+};
+
+enum desc_status {
+ /* In the DMAC pool */
+ FREE,
+ /*
+ * Allocated to some channel during prep_xxx
+ * Also may be sitting on the work_list.
+ */
+ PREP,
+ /*
+ * Sitting on the work_list and already submitted
+ * to the PL330 core. Not more than two descriptors
+ * of a channel can be BUSY at any time.
+ */
+ BUSY,
+ /*
+ * Sitting on the channel work_list but xfer done
+ * by PL330 core
+ */
+ DONE,
+};
+
+struct dma_pl330_chan {
+ /* Schedule desc completion */
+ struct tasklet_struct task;
+
+ /* DMA-Engine Channel */
+ struct dma_chan chan;
+
+ /* List of submitted descriptors */
+ struct list_head submitted_list;
+ /* List of issued descriptors */
+ struct list_head work_list;
+ /* List of completed descriptors */
+ struct list_head completed_list;
+
+ /* Pointer to the DMAC that manages this channel,
+ * NULL if the channel is available to be acquired.
+ * As the parent, this DMAC also provides descriptors
+ * to the channel.
+ */
+ struct pl330_dmac *dmac;
+
+ /* To protect channel manipulation */
+ spinlock_t lock;
+
+ /*
+ * Hardware channel thread of PL330 DMAC. NULL if the channel is
+ * available.
+ */
+ struct pl330_thread *thread;
+
+ /* For D-to-M and M-to-D channels */
+ int burst_sz; /* the peripheral fifo width */
+ int burst_len; /* the number of burst */
+ dma_addr_t fifo_addr;
+
+ /* for cyclic capability */
+ bool cyclic;
+};
+
+struct pl330_dmac {
+ /* DMA-Engine Device */
+ struct dma_device ddma;
+
+ /* Holds info about sg limitations */
+ struct device_dma_parameters dma_parms;
+
+ /* Pool of descriptors available for the DMAC's channels */
+ struct list_head desc_pool;
+ /* To protect desc_pool manipulation */
+ spinlock_t pool_lock;
+
+ /* Size of MicroCode buffers for each channel. */
+ unsigned mcbufsz;
+ /* ioremap'ed address of PL330 registers. */
+ void __iomem *base;
+ /* Populated by the PL330 core driver during pl330_add */
+ struct pl330_config pcfg;
+
+ spinlock_t lock;
+ /* Maximum possible events/irqs */
+ int events[32];
+ /* BUS address of MicroCode buffer */
+ dma_addr_t mcode_bus;
+ /* CPU address of MicroCode buffer */
+ void *mcode_cpu;
+ /* List of all Channel threads */
+ struct pl330_thread *channels;
+ /* Pointer to the MANAGER thread */
+ struct pl330_thread *manager;
+ /* To handle bad news in interrupt */
+ struct tasklet_struct tasks;
+ struct _pl330_tbd dmac_tbd;
+ /* State of DMAC operation */
+ enum pl330_dmac_state state;
+ /* Holds list of reqs with due callbacks */
+ struct list_head req_done;
+
+ /* Peripheral channels connected to this DMAC */
+ unsigned int num_peripherals;
+ struct dma_pl330_chan *peripherals; /* keep at end */
+};
+
+struct dma_pl330_desc {
+ /* To attach to a queue as child */
+ struct list_head node;
+
+ /* Descriptor for the DMA Engine API */
+ struct dma_async_tx_descriptor txd;
+
+ /* Xfer for PL330 core */
+ struct pl330_xfer px;
+
+ struct pl330_reqcfg rqcfg;
+
+ enum desc_status status;
+
+ int bytes_requested;
+ bool last;
+
+ /* The channel which currently holds this desc */
+ struct dma_pl330_chan *pchan;
+
+ enum dma_transfer_direction rqtype;
+ /* Index of peripheral for the xfer. */
+ unsigned peri:5;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
+};
+
+struct _xfer_spec {
+ u32 ccr;
+ struct dma_pl330_desc *desc;
+};
+
+static inline bool _queue_empty(struct pl330_thread *thrd)
+{
+ return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
+}
+
+static inline bool _queue_full(struct pl330_thread *thrd)
+{
+ return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
+}
+
+static inline bool is_manager(struct pl330_thread *thrd)
+{
+ return thrd->dmac->manager == thrd;
+}
+
+/* If manager of the thread is in Non-Secure mode */
+static inline bool _manager_ns(struct pl330_thread *thrd)
+{
+ return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
+}
+
+static inline u32 get_revision(u32 periph_id)
+{
+ return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
+}
+
+static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
+ enum pl330_dst da, u16 val)
+{
+ if (dry_run)
+ return SZ_DMAADDH;
+
+ buf[0] = CMD_DMAADDH;
+ buf[0] |= (da << 1);
+ *((__le16 *)&buf[1]) = cpu_to_le16(val);
+
+ PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
+ da == 1 ? "DA" : "SA", val);
+
+ return SZ_DMAADDH;
+}
+
+static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMAEND;
+
+ buf[0] = CMD_DMAEND;
+
+ PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+
+ return SZ_DMAEND;
+}
+
+static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+{
+ if (dry_run)
+ return SZ_DMAFLUSHP;
+
+ buf[0] = CMD_DMAFLUSHP;
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+
+ return SZ_DMAFLUSHP;
+}
+
+static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+ if (dry_run)
+ return SZ_DMALD;
+
+ buf[0] = CMD_DMALD;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+ return SZ_DMALD;
+}
+
+static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+{
+ if (dry_run)
+ return SZ_DMALDP;
+
+ buf[0] = CMD_DMALDP;
+
+ if (cond == BURST)
+ buf[0] |= (1 << 1);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+ cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+ return SZ_DMALDP;
+}
+
+static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+ unsigned loop, u8 cnt)
+{
+ if (dry_run)
+ return SZ_DMALP;
+
+ buf[0] = CMD_DMALP;
+
+ if (loop)
+ buf[0] |= (1 << 1);
+
+ cnt--; /* DMAC increments by 1 internally */
+ buf[1] = cnt;
+
+ PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+
+ return SZ_DMALP;
+}
+
+struct _arg_LPEND {
+ enum pl330_cond cond;
+ bool forever;
+ unsigned loop;
+ u8 bjump;
+};
+
+static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+ const struct _arg_LPEND *arg)
+{
+ enum pl330_cond cond = arg->cond;
+ bool forever = arg->forever;
+ unsigned loop = arg->loop;
+ u8 bjump = arg->bjump;
+
+ if (dry_run)
+ return SZ_DMALPEND;
+
+ buf[0] = CMD_DMALPEND;
+
+ if (loop)
+ buf[0] |= (1 << 2);
+
+ if (!forever)
+ buf[0] |= (1 << 4);
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ buf[1] = bjump;
+
+ PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+ forever ? "FE" : "END",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+ loop ? '1' : '0',
+ bjump);
+
+ return SZ_DMALPEND;
+}
+
+static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMAKILL;
+
+ buf[0] = CMD_DMAKILL;
+
+ return SZ_DMAKILL;
+}
+
+static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+ enum dmamov_dst dst, u32 val)
+{
+ if (dry_run)
+ return SZ_DMAMOV;
+
+ buf[0] = CMD_DMAMOV;
+ buf[1] = dst;
+ *((__le32 *)&buf[2]) = cpu_to_le32(val);
+
+ PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+ dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+
+ return SZ_DMAMOV;
+}
+
+static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMANOP;
+
+ buf[0] = CMD_DMANOP;
+
+ PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
+
+ return SZ_DMANOP;
+}
+
+static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMARMB;
+
+ buf[0] = CMD_DMARMB;
+
+ PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+
+ return SZ_DMARMB;
+}
+
+static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+{
+ if (dry_run)
+ return SZ_DMASEV;
+
+ buf[0] = CMD_DMASEV;
+
+ ev &= 0x1f;
+ ev <<= 3;
+ buf[1] = ev;
+
+ PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+
+ return SZ_DMASEV;
+}
+
+static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+ if (dry_run)
+ return SZ_DMAST;
+
+ buf[0] = CMD_DMAST;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+ return SZ_DMAST;
+}
+
+static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+{
+ if (dry_run)
+ return SZ_DMASTP;
+
+ buf[0] = CMD_DMASTP;
+
+ if (cond == BURST)
+ buf[0] |= (1 << 1);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+ cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+ return SZ_DMASTP;
+}
+
+static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMASTZ;
+
+ buf[0] = CMD_DMASTZ;
+
+ PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
+
+ return SZ_DMASTZ;
+}
+
+static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
+ unsigned invalidate)
+{
+ if (dry_run)
+ return SZ_DMAWFE;
+
+ buf[0] = CMD_DMAWFE;
+
+ ev &= 0x1f;
+ ev <<= 3;
+ buf[1] = ev;
+
+ if (invalidate)
+ buf[1] |= (1 << 1);
+
+ PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
+ ev >> 3, invalidate ? ", I" : "");
+
+ return SZ_DMAWFE;
+}
+
+static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+{
+ if (dry_run)
+ return SZ_DMAWFP;
+
+ buf[0] = CMD_DMAWFP;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (0 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (0 << 0);
+ else
+ buf[0] |= (0 << 1) | (1 << 0);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+
+ return SZ_DMAWFP;
+}
+
+static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMAWMB;
+
+ buf[0] = CMD_DMAWMB;
+
+ PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+
+ return SZ_DMAWMB;
+}
+
+struct _arg_GO {
+ u8 chan;
+ u32 addr;
+ unsigned ns;
+};
+
+static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+ const struct _arg_GO *arg)
+{
+ u8 chan = arg->chan;
+ u32 addr = arg->addr;
+ unsigned ns = arg->ns;
+
+ if (dry_run)
+ return SZ_DMAGO;
+
+ buf[0] = CMD_DMAGO;
+ buf[0] |= (ns << 1);
+
+ buf[1] = chan & 0x7;
+
+ *((__le32 *)&buf[2]) = cpu_to_le32(addr);
+
+ return SZ_DMAGO;
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/* Returns Time-Out */
+static bool _until_dmac_idle(struct pl330_thread *thrd)
+{
+ void __iomem *regs = thrd->dmac->base;
+ unsigned long loops = msecs_to_loops(5);
+
+ do {
+ /* Until Manager is Idle */
+ if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+ break;
+
+ cpu_relax();
+ } while (--loops);
+
+ if (!loops)
+ return true;
+
+ return false;
+}
+
+static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+ u8 insn[], bool as_manager)
+{
+ void __iomem *regs = thrd->dmac->base;
+ u32 val;
+
+ val = (insn[0] << 16) | (insn[1] << 24);
+ if (!as_manager) {
+ val |= (1 << 0);
+ val |= (thrd->id << 8); /* Channel Number */
+ }
+ writel(val, regs + DBGINST0);
+
+ val = le32_to_cpu(*((__le32 *)&insn[2]));
+ writel(val, regs + DBGINST1);
+
+ /* If timed out due to halted state-machine */
+ if (_until_dmac_idle(thrd)) {
+ dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
+ return;
+ }
+
+ /* Get going */
+ writel(0, regs + DBGCMD);
+}
+
+static inline u32 _state(struct pl330_thread *thrd)
+{
+ void __iomem *regs = thrd->dmac->base;
+ u32 val;
+
+ if (is_manager(thrd))
+ val = readl(regs + DS) & 0xf;
+ else
+ val = readl(regs + CS(thrd->id)) & 0xf;
+
+ switch (val) {
+ case DS_ST_STOP:
+ return PL330_STATE_STOPPED;
+ case DS_ST_EXEC:
+ return PL330_STATE_EXECUTING;
+ case DS_ST_CMISS:
+ return PL330_STATE_CACHEMISS;
+ case DS_ST_UPDTPC:
+ return PL330_STATE_UPDTPC;
+ case DS_ST_WFE:
+ return PL330_STATE_WFE;
+ case DS_ST_FAULT:
+ return PL330_STATE_FAULTING;
+ case DS_ST_ATBRR:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_ATBARRIER;
+ case DS_ST_QBUSY:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_QUEUEBUSY;
+ case DS_ST_WFP:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_WFP;
+ case DS_ST_KILL:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_KILLING;
+ case DS_ST_CMPLT:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_COMPLETING;
+ case DS_ST_FLTCMP:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_FAULT_COMPLETING;
+ default:
+ return PL330_STATE_INVALID;
+ }
+}
+
+static void _stop(struct pl330_thread *thrd)
+{
+ void __iomem *regs = thrd->dmac->base;
+ u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+ if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+ UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+ /* Return if nothing needs to be done */
+ if (_state(thrd) == PL330_STATE_COMPLETING
+ || _state(thrd) == PL330_STATE_KILLING
+ || _state(thrd) == PL330_STATE_STOPPED)
+ return;
+
+ _emit_KILL(0, insn);
+
+ /* Stop generating interrupts for SEV */
+ writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+
+ _execute_DBGINSN(thrd, insn, is_manager(thrd));
+}
+
+/* Start doing req 'idx' of thread 'thrd' */
+static bool _trigger(struct pl330_thread *thrd)
+{
+ void __iomem *regs = thrd->dmac->base;
+ struct _pl330_req *req;
+ struct dma_pl330_desc *desc;
+ struct _arg_GO go;
+ unsigned ns;
+ u8 insn[6] = {0, 0, 0, 0, 0, 0};
+ int idx;
+
+ /* Return if already ACTIVE */
+ if (_state(thrd) != PL330_STATE_STOPPED)
+ return true;
+
+ idx = 1 - thrd->lstenq;
+ if (thrd->req[idx].desc != NULL) {
+ req = &thrd->req[idx];
+ } else {
+ idx = thrd->lstenq;
+ if (thrd->req[idx].desc != NULL)
+ req = &thrd->req[idx];
+ else
+ req = NULL;
+ }
+
+ /* Return if no request */
+ if (!req)
+ return true;
+
+ /* Return if req is running */
+ if (idx == thrd->req_running)
+ return true;
+
+ desc = req->desc;
+
+ ns = desc->rqcfg.nonsecure ? 1 : 0;
+
+ /* See 'Abort Sources' point-4 at Page 2-25 */
+ if (_manager_ns(thrd) && !ns)
+ dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
+ __func__, __LINE__);
+
+ go.chan = thrd->id;
+ go.addr = req->mc_bus;
+ go.ns = ns;
+ _emit_GO(0, insn, &go);
+
+ /* Set to generate interrupts for SEV */
+ writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+
+ /* Only manager can execute GO */
+ _execute_DBGINSN(thrd, insn, true);
+
+ thrd->req_running = idx;
+
+ return true;
+}
+
+static bool _start(struct pl330_thread *thrd)
+{
+ switch (_state(thrd)) {
+ case PL330_STATE_FAULT_COMPLETING:
+ UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+ if (_state(thrd) == PL330_STATE_KILLING)
+ UNTIL(thrd, PL330_STATE_STOPPED)
+
+ case PL330_STATE_FAULTING:
+ _stop(thrd);
+
+ case PL330_STATE_KILLING:
+ case PL330_STATE_COMPLETING:
+ UNTIL(thrd, PL330_STATE_STOPPED)
+
+ case PL330_STATE_STOPPED:
+ return _trigger(thrd);
+
+ case PL330_STATE_WFP:
+ case PL330_STATE_QUEUEBUSY:
+ case PL330_STATE_ATBARRIER:
+ case PL330_STATE_UPDTPC:
+ case PL330_STATE_CACHEMISS:
+ case PL330_STATE_EXECUTING:
+ return true;
+
+ case PL330_STATE_WFE: /* For RESUME, nothing yet */
+ default:
+ return false;
+ }
+}
+
+static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+{
+ int off = 0;
+ struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
+
+ /* check lock-up free version */
+ if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
+ while (cyc--) {
+ off += _emit_LD(dry_run, &buf[off], ALWAYS);
+ off += _emit_ST(dry_run, &buf[off], ALWAYS);
+ }
+ } else {
+ while (cyc--) {
+ off += _emit_LD(dry_run, &buf[off], ALWAYS);
+ off += _emit_RMB(dry_run, &buf[off]);
+ off += _emit_ST(dry_run, &buf[off], ALWAYS);
+ off += _emit_WMB(dry_run, &buf[off]);
+ }
+ }
+
+ return off;
+}
+
+static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+{
+ int off = 0;
+
+ while (cyc--) {
+ off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+ off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+ off += _emit_ST(dry_run, &buf[off], ALWAYS);
+ off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
+ }
+
+ return off;
+}
+
+static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+{
+ int off = 0;
+
+ while (cyc--) {
+ off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+ off += _emit_LD(dry_run, &buf[off], ALWAYS);
+ off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+ off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
+ }
+
+ return off;
+}
+
+static int _bursts(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+{
+ int off = 0;
+
+ switch (pxs->desc->rqtype) {
+ case DMA_MEM_TO_DEV:
+ off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+ break;
+ case DMA_DEV_TO_MEM:
+ off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+ break;
+ case DMA_MEM_TO_MEM:
+ off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+ break;
+ default:
+ off += 0x40000000; /* Scare off the Client */
+ break;
+ }
+
+ return off;
+}
+
+/* Returns bytes consumed and updates bursts */
+static inline int _loop(unsigned dry_run, u8 buf[],
+ unsigned long *bursts, const struct _xfer_spec *pxs)
+{
+ int cyc, cycmax, szlp, szlpend, szbrst, off;
+ unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+ struct _arg_LPEND lpend;
+
+ /* Max iterations possible in DMALP is 256 */
+ if (*bursts >= 256*256) {
+ lcnt1 = 256;
+ lcnt0 = 256;
+ cyc = *bursts / lcnt1 / lcnt0;
+ } else if (*bursts > 256) {
+ lcnt1 = 256;
+ lcnt0 = *bursts / lcnt1;
+ cyc = 1;
+ } else {
+ lcnt1 = *bursts;
+ lcnt0 = 0;
+ cyc = 1;
+ }
+
+ szlp = _emit_LP(1, buf, 0, 0);
+ szbrst = _bursts(1, buf, pxs, 1);
+
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 0;
+ lpend.bjump = 0;
+ szlpend = _emit_LPEND(1, buf, &lpend);
+
+ if (lcnt0) {
+ szlp *= 2;
+ szlpend *= 2;
+ }
+
+ /*
+ * Max bursts that we can unroll due to limit on the
+ * size of backward jump that can be encoded in DMALPEND
+ * which is 8-bits and hence 255
+ */
+ cycmax = (255 - (szlp + szlpend)) / szbrst;
+
+ cyc = (cycmax < cyc) ? cycmax : cyc;
+
+ off = 0;
+
+ if (lcnt0) {
+ off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+ ljmp0 = off;
+ }
+
+ off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+ ljmp1 = off;
+
+ off += _bursts(dry_run, &buf[off], pxs, cyc);
+
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 1;
+ lpend.bjump = off - ljmp1;
+ off += _emit_LPEND(dry_run, &buf[off], &lpend);
+
+ if (lcnt0) {
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 0;
+ lpend.bjump = off - ljmp0;
+ off += _emit_LPEND(dry_run, &buf[off], &lpend);
+ }
+
+ *bursts = lcnt1 * cyc;
+ if (lcnt0)
+ *bursts *= lcnt0;
+
+ return off;
+}
+
+static inline int _setup_loops(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs)
+{
+ struct pl330_xfer *x = &pxs->desc->px;
+ u32 ccr = pxs->ccr;
+ unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+ int off = 0;
+
+ while (bursts) {
+ c = bursts;
+ off += _loop(dry_run, &buf[off], &c, pxs);
+ bursts -= c;
+ }
+
+ return off;
+}
+
+static inline int _setup_xfer(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs)
+{
+ struct pl330_xfer *x = &pxs->desc->px;
+ int off = 0;
+
+ /* DMAMOV SAR, x->src_addr */
+ off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+ /* DMAMOV DAR, x->dst_addr */
+ off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+
+ /* Setup Loop(s) */
+ off += _setup_loops(dry_run, &buf[off], pxs);
+
+ return off;
+}
+
+/*
+ * A req is a sequence of one or more xfer units.
+ * Returns the number of bytes taken to setup the MC for the req.
+ */
+static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
+ unsigned index, struct _xfer_spec *pxs)
+{
+ struct _pl330_req *req = &thrd->req[index];
+ struct pl330_xfer *x;
+ u8 *buf = req->mc_cpu;
+ int off = 0;
+
+ PL330_DBGMC_START(req->mc_bus);
+
+ /* DMAMOV CCR, ccr */
+ off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+
+ x = &pxs->desc->px;
+ /* Error if xfer length is not aligned at burst size */
+ if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+ return -EINVAL;
+
+ off += _setup_xfer(dry_run, &buf[off], pxs);
+
+ /* DMASEV peripheral/event */
+ off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+ /* DMAEND */
+ off += _emit_END(dry_run, &buf[off]);
+
+ return off;
+}
+
+static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+{
+ u32 ccr = 0;
+
+ if (rqc->src_inc)
+ ccr |= CC_SRCINC;
+
+ if (rqc->dst_inc)
+ ccr |= CC_DSTINC;
+
+ /* We set same protection levels for Src and DST for now */
+ if (rqc->privileged)
+ ccr |= CC_SRCPRI | CC_DSTPRI;
+ if (rqc->nonsecure)
+ ccr |= CC_SRCNS | CC_DSTNS;
+ if (rqc->insnaccess)
+ ccr |= CC_SRCIA | CC_DSTIA;
+
+ ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+ ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+ ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+ ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+ ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+ ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
+
+ ccr |= (rqc->swap << CC_SWAP_SHFT);
+
+ return ccr;
+}
+
+/*
+ * Submit a list of xfers after which the client wants notification.
+ * Client is not notified after each xfer unit, just once after all
+ * xfer units are done or some error occurs.
+ */
+static int pl330_submit_req(struct pl330_thread *thrd,
+ struct dma_pl330_desc *desc)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+ struct _xfer_spec xs;
+ unsigned long flags;
+ unsigned idx;
+ u32 ccr;
+ int ret = 0;
+
+ if (pl330->state == DYING
+ || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+ dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
+ __func__, __LINE__);
+ return -EAGAIN;
+ }
+
+ /* If request for non-existing peripheral */
+ if (desc->rqtype != DMA_MEM_TO_MEM &&
+ desc->peri >= pl330->pcfg.num_peri) {
+ dev_info(thrd->dmac->ddma.dev,
+ "%s:%d Invalid peripheral(%u)!\n",
+ __func__, __LINE__, desc->peri);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ if (_queue_full(thrd)) {
+ ret = -EAGAIN;
+ goto xfer_exit;
+ }
+
+ /* Prefer Secure Channel */
+ if (!_manager_ns(thrd))
+ desc->rqcfg.nonsecure = 0;
+ else
+ desc->rqcfg.nonsecure = 1;
+
+ ccr = _prepare_ccr(&desc->rqcfg);
+
+ idx = thrd->req[0].desc == NULL ? 0 : 1;
+
+ xs.ccr = ccr;
+ xs.desc = desc;
+
+ /* First dry run to check if req is acceptable */
+ ret = _setup_req(1, thrd, idx, &xs);
+ if (ret < 0)
+ goto xfer_exit;
+
+ if (ret > pl330->mcbufsz / 2) {
+ dev_info(pl330->ddma.dev, "%s:%d Trying increasing mcbufsz\n",
+ __func__, __LINE__);
+ ret = -ENOMEM;
+ goto xfer_exit;
+ }
+
+ /* Hook the request */
+ thrd->lstenq = idx;
+ thrd->req[idx].desc = desc;
+ _setup_req(0, thrd, idx, &xs);
+
+ ret = 0;
+
+xfer_exit:
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return ret;
+}
+
+static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
+{
+ struct dma_pl330_chan *pch;
+ unsigned long flags;
+
+ if (!desc)
+ return;
+
+ pch = desc->pchan;
+
+ /* If desc aborted */
+ if (!pch)
+ return;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ desc->status = DONE;
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ tasklet_schedule(&pch->task);
+}
+
+static void pl330_dotask(unsigned long data)
+{
+ struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ /* The DMAC itself gone nuts */
+ if (pl330->dmac_tbd.reset_dmac) {
+ pl330->state = DYING;
+ /* Reset the manager too */
+ pl330->dmac_tbd.reset_mngr = true;
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_dmac = false;
+ }
+
+ if (pl330->dmac_tbd.reset_mngr) {
+ _stop(pl330->manager);
+ /* Reset all channels */
+ pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_mngr = false;
+ }
+
+ for (i = 0; i < pl330->pcfg.num_chan; i++) {
+
+ if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+ struct pl330_thread *thrd = &pl330->channels[i];
+ void __iomem *regs = pl330->base;
+ enum pl330_op_err err;
+
+ _stop(thrd);
+
+ if (readl(regs + FSC) & (1 << thrd->id))
+ err = PL330_ERR_FAIL;
+ else
+ err = PL330_ERR_ABORT;
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+ dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
+ dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ thrd->req[0].desc = NULL;
+ thrd->req[1].desc = NULL;
+ thrd->req_running = -1;
+
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_chan &= ~(1 << i);
+ }
+ }
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return;
+}
+
+/* Returns 1 if state was updated, 0 otherwise */
+static int pl330_update(struct pl330_dmac *pl330)
+{
+ struct dma_pl330_desc *descdone, *tmp;
+ unsigned long flags;
+ void __iomem *regs;
+ u32 val;
+ int id, ev, ret = 0;
+
+ regs = pl330->base;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ val = readl(regs + FSM) & 0x1;
+ if (val)
+ pl330->dmac_tbd.reset_mngr = true;
+ else
+ pl330->dmac_tbd.reset_mngr = false;
+
+ val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
+ pl330->dmac_tbd.reset_chan |= val;
+ if (val) {
+ int i = 0;
+ while (i < pl330->pcfg.num_chan) {
+ if (val & (1 << i)) {
+ dev_info(pl330->ddma.dev,
+ "Reset Channel-%d\t CS-%x FTC-%x\n",
+ i, readl(regs + CS(i)),
+ readl(regs + FTC(i)));
+ _stop(&pl330->channels[i]);
+ }
+ i++;
+ }
+ }
+
+ /* Check which event happened i.e, thread notified */
+ val = readl(regs + ES);
+ if (pl330->pcfg.num_events < 32
+ && val & ~((1 << pl330->pcfg.num_events) - 1)) {
+ pl330->dmac_tbd.reset_dmac = true;
+ dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
+ __LINE__);
+ ret = 1;
+ goto updt_exit;
+ }
+
+ for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
+ if (val & (1 << ev)) { /* Event occurred */
+ struct pl330_thread *thrd;
+ u32 inten = readl(regs + INTEN);
+ int active;
+
+ /* Clear the event */
+ if (inten & (1 << ev))
+ writel(1 << ev, regs + INTCLR);
+
+ ret = 1;
+
+ id = pl330->events[ev];
+
+ thrd = &pl330->channels[id];
+
+ active = thrd->req_running;
+ if (active == -1) /* Aborted */
+ continue;
+
+ /* Detach the req */
+ descdone = thrd->req[active].desc;
+ thrd->req[active].desc = NULL;
+
+ thrd->req_running = -1;
+
+ /* Get going again ASAP */
+ _start(thrd);
+
+ /* For now, just make a list of callbacks to be done */
+ list_add_tail(&descdone->rqd, &pl330->req_done);
+ }
+ }
+
+ /* Now that we are in no hurry, do the callbacks */
+ list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
+ list_del(&descdone->rqd);
+ spin_unlock_irqrestore(&pl330->lock, flags);
+ dma_pl330_rqcb(descdone, PL330_ERR_NONE);
+ spin_lock_irqsave(&pl330->lock, flags);
+ }
+
+updt_exit:
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ if (pl330->dmac_tbd.reset_dmac
+ || pl330->dmac_tbd.reset_mngr
+ || pl330->dmac_tbd.reset_chan) {
+ ret = 1;
+ tasklet_schedule(&pl330->tasks);
+ }
+
+ return ret;
+}
+
+/* Reserve an event */
+static inline int _alloc_event(struct pl330_thread *thrd)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+ int ev;
+
+ for (ev = 0; ev < pl330->pcfg.num_events; ev++)
+ if (pl330->events[ev] == -1) {
+ pl330->events[ev] = thrd->id;
+ return ev;
+ }
+
+ return -1;
+}
+
+static bool _chan_ns(const struct pl330_dmac *pl330, int i)
+{
+ return pl330->pcfg.irq_ns & (1 << i);
+}
+
+/* Upon success, returns IdentityToken for the
+ * allocated channel, NULL otherwise.
+ */
+static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
+{
+ struct pl330_thread *thrd = NULL;
+ unsigned long flags;
+ int chans, i;
+
+ if (pl330->state == DYING)
+ return NULL;
+
+ chans = pl330->pcfg.num_chan;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ for (i = 0; i < chans; i++) {
+ thrd = &pl330->channels[i];
+ if ((thrd->free) && (!_manager_ns(thrd) ||
+ _chan_ns(pl330, i))) {
+ thrd->ev = _alloc_event(thrd);
+ if (thrd->ev >= 0) {
+ thrd->free = false;
+ thrd->lstenq = 1;
+ thrd->req[0].desc = NULL;
+ thrd->req[1].desc = NULL;
+ thrd->req_running = -1;
+ break;
+ }
+ }
+ thrd = NULL;
+ }
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return thrd;
+}
+
+/* Release an event */
+static inline void _free_event(struct pl330_thread *thrd, int ev)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+
+ /* If the event is valid and was held by the thread */
+ if (ev >= 0 && ev < pl330->pcfg.num_events
+ && pl330->events[ev] == thrd->id)
+ pl330->events[ev] = -1;
+}
+
+static void pl330_release_channel(struct pl330_thread *thrd)
+{
+ struct pl330_dmac *pl330;
+ unsigned long flags;
+
+ if (!thrd || thrd->free)
+ return;
+
+ _stop(thrd);
+
+ dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
+ dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
+
+ pl330 = thrd->dmac;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+ _free_event(thrd, thrd->ev);
+ thrd->free = true;
+ spin_unlock_irqrestore(&pl330->lock, flags);
+}
+
+/* Initialize the structure for PL330 configuration, that can be used
+ * by the client driver the make best use of the DMAC
+ */
+static void read_dmac_config(struct pl330_dmac *pl330)
+{
+ void __iomem *regs = pl330->base;
+ u32 val;
+
+ val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+ val &= CRD_DATA_WIDTH_MASK;
+ pl330->pcfg.data_bus_width = 8 * (1 << val);
+
+ val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+ val &= CRD_DATA_BUFF_MASK;
+ pl330->pcfg.data_buf_dep = val + 1;
+
+ val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+ val &= CR0_NUM_CHANS_MASK;
+ val += 1;
+ pl330->pcfg.num_chan = val;
+
+ val = readl(regs + CR0);
+ if (val & CR0_PERIPH_REQ_SET) {
+ val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+ val += 1;
+ pl330->pcfg.num_peri = val;
+ pl330->pcfg.peri_ns = readl(regs + CR4);
+ } else {
+ pl330->pcfg.num_peri = 0;
+ }
+
+ val = readl(regs + CR0);
+ if (val & CR0_BOOT_MAN_NS)
+ pl330->pcfg.mode |= DMAC_MODE_NS;
+ else
+ pl330->pcfg.mode &= ~DMAC_MODE_NS;
+
+ val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+ val &= CR0_NUM_EVENTS_MASK;
+ val += 1;
+ pl330->pcfg.num_events = val;
+
+ pl330->pcfg.irq_ns = readl(regs + CR3);
+}
+
+static inline void _reset_thread(struct pl330_thread *thrd)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+
+ thrd->req[0].mc_cpu = pl330->mcode_cpu
+ + (thrd->id * pl330->mcbufsz);
+ thrd->req[0].mc_bus = pl330->mcode_bus
+ + (thrd->id * pl330->mcbufsz);
+ thrd->req[0].desc = NULL;
+
+ thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+ + pl330->mcbufsz / 2;
+ thrd->req[1].mc_bus = thrd->req[0].mc_bus
+ + pl330->mcbufsz / 2;
+ thrd->req[1].desc = NULL;
+
+ thrd->req_running = -1;
+}
+
+static int dmac_alloc_threads(struct pl330_dmac *pl330)
+{
+ int chans = pl330->pcfg.num_chan;
+ struct pl330_thread *thrd;
+ int i;
+
+ /* Allocate 1 Manager and 'chans' Channel threads */
+ pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
+ GFP_KERNEL);
+ if (!pl330->channels)
+ return -ENOMEM;
+
+ /* Init Channel threads */
+ for (i = 0; i < chans; i++) {
+ thrd = &pl330->channels[i];
+ thrd->id = i;
+ thrd->dmac = pl330;
+ _reset_thread(thrd);
+ thrd->free = true;
+ }
+
+ /* MANAGER is indexed at the end */
+ thrd = &pl330->channels[chans];
+ thrd->id = chans;
+ thrd->dmac = pl330;
+ thrd->free = false;
+ pl330->manager = thrd;
+
+ return 0;
+}
+
+static int dmac_alloc_resources(struct pl330_dmac *pl330)
+{
+ int chans = pl330->pcfg.num_chan;
+ int ret;
+
+ /*
+ * Alloc MicroCode buffer for 'chans' Channel threads.
+ * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
+ */
+ pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
+ chans * pl330->mcbufsz,
+ &pl330->mcode_bus, GFP_KERNEL);
+ if (!pl330->mcode_cpu) {
+ dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ ret = dmac_alloc_threads(pl330);
+ if (ret) {
+ dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
+ __func__, __LINE__);
+ dma_free_coherent(pl330->ddma.dev,
+ chans * pl330->mcbufsz,
+ pl330->mcode_cpu, pl330->mcode_bus);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int pl330_add(struct pl330_dmac *pl330)
+{
+ void __iomem *regs;
+ int i, ret;
+
+ regs = pl330->base;
+
+ /* Check if we can handle this DMAC */
+ if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
+ dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
+ pl330->pcfg.periph_id);
+ return -EINVAL;
+ }
+
+ /* Read the configuration of the DMAC */
+ read_dmac_config(pl330);
+
+ if (pl330->pcfg.num_events == 0) {
+ dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ spin_lock_init(&pl330->lock);
+
+ INIT_LIST_HEAD(&pl330->req_done);
+
+ /* Use default MC buffer size if not provided */
+ if (!pl330->mcbufsz)
+ pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
+
+ /* Mark all events as free */
+ for (i = 0; i < pl330->pcfg.num_events; i++)
+ pl330->events[i] = -1;
+
+ /* Allocate resources needed by the DMAC */
+ ret = dmac_alloc_resources(pl330);
+ if (ret) {
+ dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
+ return ret;
+ }
+
+ tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
+
+ pl330->state = INIT;
+
+ return 0;
+}
+
+static int dmac_free_threads(struct pl330_dmac *pl330)
+{
+ struct pl330_thread *thrd;
+ int i;
+
+ /* Release Channel threads */
+ for (i = 0; i < pl330->pcfg.num_chan; i++) {
+ thrd = &pl330->channels[i];
+ pl330_release_channel(thrd);
+ }
+
+ /* Free memory */
+ kfree(pl330->channels);
+
+ return 0;
+}
+
+static void pl330_del(struct pl330_dmac *pl330)
+{
+ pl330->state = UNINIT;
+
+ tasklet_kill(&pl330->tasks);
+
+ /* Free DMAC resources */
+ dmac_free_threads(pl330);
+
+ dma_free_coherent(pl330->ddma.dev,
+ pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
+ pl330->mcode_bus);
+}
+
+/* forward declaration */
+static struct amba_driver pl330_driver;
+
+static inline struct dma_pl330_chan *
+to_pchan(struct dma_chan *ch)
+{
+ if (!ch)
+ return NULL;
+
+ return container_of(ch, struct dma_pl330_chan, chan);
+}
+
+static inline struct dma_pl330_desc *
+to_desc(struct dma_async_tx_descriptor *tx)
+{
+ return container_of(tx, struct dma_pl330_desc, txd);
+}
+
+static inline void fill_queue(struct dma_pl330_chan *pch)
+{
+ struct dma_pl330_desc *desc;
+ int ret;
+
+ list_for_each_entry(desc, &pch->work_list, node) {
+
+ /* If already submitted */
+ if (desc->status == BUSY)
+ continue;
+
+ ret = pl330_submit_req(pch->thread, desc);
+ if (!ret) {
+ desc->status = BUSY;
+ } else if (ret == -EAGAIN) {
+ /* QFull or DMAC Dying */
+ break;
+ } else {
+ /* Unacceptable request */
+ desc->status = DONE;
+ dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
+ __func__, __LINE__, desc->txd.cookie);
+ tasklet_schedule(&pch->task);
+ }
+ }
+}
+
+static void pl330_tasklet(unsigned long data)
+{
+ struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
+ struct dma_pl330_desc *desc, *_dt;
+ unsigned long flags;
+ bool power_down = false;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ /* Pick up ripe tomatoes */
+ list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
+ if (desc->status == DONE) {
+ if (!pch->cyclic)
+ dma_cookie_complete(&desc->txd);
+ list_move_tail(&desc->node, &pch->completed_list);
+ }
+
+ /* Try to submit a req imm. next to the last completed cookie */
+ fill_queue(pch);
+
+ if (list_empty(&pch->work_list)) {
+ spin_lock(&pch->thread->dmac->lock);
+ _stop(pch->thread);
+ spin_unlock(&pch->thread->dmac->lock);
+ power_down = true;
+ } else {
+ /* Make sure the PL330 Channel thread is active */
+ spin_lock(&pch->thread->dmac->lock);
+ _start(pch->thread);
+ spin_unlock(&pch->thread->dmac->lock);
+ }
+
+ while (!list_empty(&pch->completed_list)) {
+ dma_async_tx_callback callback;
+ void *callback_param;
+
+ desc = list_first_entry(&pch->completed_list,
+ struct dma_pl330_desc, node);
+
+ callback = desc->txd.callback;
+ callback_param = desc->txd.callback_param;
+
+ if (pch->cyclic) {
+ desc->status = PREP;
+ list_move_tail(&desc->node, &pch->work_list);
+ if (power_down) {
+ spin_lock(&pch->thread->dmac->lock);
+ _start(pch->thread);
+ spin_unlock(&pch->thread->dmac->lock);
+ power_down = false;
+ }
+ } else {
+ desc->status = FREE;
+ list_move_tail(&desc->node, &pch->dmac->desc_pool);
+ }
+
+ dma_descriptor_unmap(&desc->txd);
+
+ if (callback) {
+ spin_unlock_irqrestore(&pch->lock, flags);
+ callback(callback_param);
+ spin_lock_irqsave(&pch->lock, flags);
+ }
+ }
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ /* If work list empty, power down */
+ if (power_down) {
+ pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
+ pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
+ }
+}
+
+bool pl330_filter(struct dma_chan *chan, void *param)
+{
+ u8 *peri_id;
+
+ if (chan->device->dev->driver != &pl330_driver.drv)
+ return false;
+
+ peri_id = chan->private;
+ return *peri_id == (unsigned long)param;
+}
+EXPORT_SYMBOL(pl330_filter);
+
+static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ int count = dma_spec->args_count;
+ struct pl330_dmac *pl330 = ofdma->of_dma_data;
+ unsigned int chan_id;
+
+ if (!pl330)
+ return NULL;
+
+ if (count != 1)
+ return NULL;
+
+ chan_id = dma_spec->args[0];
+ if (chan_id >= pl330->num_peripherals)
+ return NULL;
+
+ return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
+}
+
+static int pl330_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct pl330_dmac *pl330 = pch->dmac;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ dma_cookie_init(chan);
+ pch->cyclic = false;
+
+ pch->thread = pl330_request_channel(pl330);
+ if (!pch->thread) {
+ spin_unlock_irqrestore(&pch->lock, flags);
+ return -ENOMEM;
+ }
+
+ tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ return 1;
+}
+
+static int pl330_config(struct dma_chan *chan,
+ struct dma_slave_config *slave_config)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+
+ if (slave_config->direction == DMA_MEM_TO_DEV) {
+ if (slave_config->dst_addr)
+ pch->fifo_addr = slave_config->dst_addr;
+ if (slave_config->dst_addr_width)
+ pch->burst_sz = __ffs(slave_config->dst_addr_width);
+ if (slave_config->dst_maxburst)
+ pch->burst_len = slave_config->dst_maxburst;
+ } else if (slave_config->direction == DMA_DEV_TO_MEM) {
+ if (slave_config->src_addr)
+ pch->fifo_addr = slave_config->src_addr;
+ if (slave_config->src_addr_width)
+ pch->burst_sz = __ffs(slave_config->src_addr_width);
+ if (slave_config->src_maxburst)
+ pch->burst_len = slave_config->src_maxburst;
+ }
+
+ return 0;
+}
+
+static int pl330_terminate_all(struct dma_chan *chan)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct dma_pl330_desc *desc;
+ unsigned long flags;
+ struct pl330_dmac *pl330 = pch->dmac;
+ LIST_HEAD(list);
+
+ pm_runtime_get_sync(pl330->ddma.dev);
+ spin_lock_irqsave(&pch->lock, flags);
+ spin_lock(&pl330->lock);
+ _stop(pch->thread);
+ spin_unlock(&pl330->lock);
+
+ pch->thread->req[0].desc = NULL;
+ pch->thread->req[1].desc = NULL;
+ pch->thread->req_running = -1;
+
+ /* Mark all desc done */
+ list_for_each_entry(desc, &pch->submitted_list, node) {
+ desc->status = FREE;
+ dma_cookie_complete(&desc->txd);
+ }
+
+ list_for_each_entry(desc, &pch->work_list , node) {
+ desc->status = FREE;
+ dma_cookie_complete(&desc->txd);
+ }
+
+ list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
+ list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
+ list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
+ spin_unlock_irqrestore(&pch->lock, flags);
+ pm_runtime_mark_last_busy(pl330->ddma.dev);
+ pm_runtime_put_autosuspend(pl330->ddma.dev);
+
+ return 0;
+}
+
+/*
+ * We don't support DMA_RESUME command because of hardware
+ * limitations, so after pausing the channel we cannot restore
+ * it to active state. We have to terminate channel and setup
+ * DMA transfer again. This pause feature was implemented to
+ * allow safely read residue before channel termination.
+ */
+static int pl330_pause(struct dma_chan *chan)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct pl330_dmac *pl330 = pch->dmac;
+ unsigned long flags;
+
+ pm_runtime_get_sync(pl330->ddma.dev);
+ spin_lock_irqsave(&pch->lock, flags);
+
+ spin_lock(&pl330->lock);
+ _stop(pch->thread);
+ spin_unlock(&pl330->lock);
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+ pm_runtime_mark_last_busy(pl330->ddma.dev);
+ pm_runtime_put_autosuspend(pl330->ddma.dev);
+
+ return 0;
+}
+
+static void pl330_free_chan_resources(struct dma_chan *chan)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ unsigned long flags;
+
+ tasklet_kill(&pch->task);
+
+ pm_runtime_get_sync(pch->dmac->ddma.dev);
+ spin_lock_irqsave(&pch->lock, flags);
+
+ pl330_release_channel(pch->thread);
+ pch->thread = NULL;
+
+ if (pch->cyclic)
+ list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+ pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
+ pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
+}
+
+static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
+ struct dma_pl330_desc *desc)
+{
+ struct pl330_thread *thrd = pch->thread;
+ struct pl330_dmac *pl330 = pch->dmac;
+ void __iomem *regs = thrd->dmac->base;
+ u32 val, addr;
+
+ pm_runtime_get_sync(pl330->ddma.dev);
+ val = addr = 0;
+ if (desc->rqcfg.src_inc) {
+ val = readl(regs + SA(thrd->id));
+ addr = desc->px.src_addr;
+ } else {
+ val = readl(regs + DA(thrd->id));
+ addr = desc->px.dst_addr;
+ }
+ pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
+ pm_runtime_put_autosuspend(pl330->ddma.dev);
+ return val - addr;
+}
+
+static enum dma_status
+pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ enum dma_status ret;
+ unsigned long flags;
+ struct dma_pl330_desc *desc, *running = NULL;
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ unsigned int transferred, residual = 0;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+
+ if (!txstate)
+ return ret;
+
+ if (ret == DMA_COMPLETE)
+ goto out;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ if (pch->thread->req_running != -1)
+ running = pch->thread->req[pch->thread->req_running].desc;
+
+ /* Check in pending list */
+ list_for_each_entry(desc, &pch->work_list, node) {
+ if (desc->status == DONE)
+ transferred = desc->bytes_requested;
+ else if (running && desc == running)
+ transferred =
+ pl330_get_current_xferred_count(pch, desc);
+ else
+ transferred = 0;
+ residual += desc->bytes_requested - transferred;
+ if (desc->txd.cookie == cookie) {
+ switch (desc->status) {
+ case DONE:
+ ret = DMA_COMPLETE;
+ break;
+ case PREP:
+ case BUSY:
+ ret = DMA_IN_PROGRESS;
+ break;
+ default:
+ WARN_ON(1);
+ }
+ break;
+ }
+ if (desc->last)
+ residual = 0;
+ }
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+out:
+ dma_set_residue(txstate, residual);
+
+ return ret;
+}
+
+static void pl330_issue_pending(struct dma_chan *chan)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pch->lock, flags);
+ if (list_empty(&pch->work_list)) {
+ /*
+ * Warn on nothing pending. Empty submitted_list may
+ * break our pm_runtime usage counter as it is
+ * updated on work_list emptiness status.
+ */
+ WARN_ON(list_empty(&pch->submitted_list));
+ pm_runtime_get_sync(pch->dmac->ddma.dev);
+ }
+ list_splice_tail_init(&pch->submitted_list, &pch->work_list);
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ pl330_tasklet((unsigned long)pch);
+}
+
+/*
+ * We returned the last one of the circular list of descriptor(s)
+ * from prep_xxx, so the argument to submit corresponds to the last
+ * descriptor of the list.
+ */
+static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct dma_pl330_desc *desc, *last = to_desc(tx);
+ struct dma_pl330_chan *pch = to_pchan(tx->chan);
+ dma_cookie_t cookie;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ /* Assign cookies to all nodes */
+ while (!list_empty(&last->node)) {
+ desc = list_entry(last->node.next, struct dma_pl330_desc, node);
+ if (pch->cyclic) {
+ desc->txd.callback = last->txd.callback;
+ desc->txd.callback_param = last->txd.callback_param;
+ }
+ last->last = false;
+
+ dma_cookie_assign(&desc->txd);
+
+ list_move_tail(&desc->node, &pch->submitted_list);
+ }
+
+ last->last = true;
+ cookie = dma_cookie_assign(&last->txd);
+ list_add_tail(&last->node, &pch->submitted_list);
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ return cookie;
+}
+
+static inline void _init_desc(struct dma_pl330_desc *desc)
+{
+ desc->rqcfg.swap = SWAP_NO;
+ desc->rqcfg.scctl = CCTRL0;
+ desc->rqcfg.dcctl = CCTRL0;
+ desc->txd.tx_submit = pl330_tx_submit;
+
+ INIT_LIST_HEAD(&desc->node);
+}
+
+/* Returns the number of descriptors added to the DMAC pool */
+static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
+{
+ struct dma_pl330_desc *desc;
+ unsigned long flags;
+ int i;
+
+ desc = kcalloc(count, sizeof(*desc), flg);
+ if (!desc)
+ return 0;
+
+ spin_lock_irqsave(&pl330->pool_lock, flags);
+
+ for (i = 0; i < count; i++) {
+ _init_desc(&desc[i]);
+ list_add_tail(&desc[i].node, &pl330->desc_pool);
+ }
+
+ spin_unlock_irqrestore(&pl330->pool_lock, flags);
+
+ return count;
+}
+
+static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
+{
+ struct dma_pl330_desc *desc = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pl330->pool_lock, flags);
+
+ if (!list_empty(&pl330->desc_pool)) {
+ desc = list_entry(pl330->desc_pool.next,
+ struct dma_pl330_desc, node);
+
+ list_del_init(&desc->node);
+
+ desc->status = PREP;
+ desc->txd.callback = NULL;
+ }
+
+ spin_unlock_irqrestore(&pl330->pool_lock, flags);
+
+ return desc;
+}
+
+static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
+{
+ struct pl330_dmac *pl330 = pch->dmac;
+ u8 *peri_id = pch->chan.private;
+ struct dma_pl330_desc *desc;
+
+ /* Pluck one desc from the pool of DMAC */
+ desc = pluck_desc(pl330);
+
+ /* If the DMAC pool is empty, alloc new */
+ if (!desc) {
+ if (!add_desc(pl330, GFP_ATOMIC, 1))
+ return NULL;
+
+ /* Try again */
+ desc = pluck_desc(pl330);
+ if (!desc) {
+ dev_err(pch->dmac->ddma.dev,
+ "%s:%d ALERT!\n", __func__, __LINE__);
+ return NULL;
+ }
+ }
+
+ /* Initialize the descriptor */
+ desc->pchan = pch;
+ desc->txd.cookie = 0;
+ async_tx_ack(&desc->txd);
+
+ desc->peri = peri_id ? pch->chan.chan_id : 0;
+ desc->rqcfg.pcfg = &pch->dmac->pcfg;
+
+ dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
+
+ return desc;
+}
+
+static inline void fill_px(struct pl330_xfer *px,
+ dma_addr_t dst, dma_addr_t src, size_t len)
+{
+ px->bytes = len;
+ px->dst_addr = dst;
+ px->src_addr = src;
+}
+
+static struct dma_pl330_desc *
+__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
+ dma_addr_t src, size_t len)
+{
+ struct dma_pl330_desc *desc = pl330_get_desc(pch);
+
+ if (!desc) {
+ dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
+ __func__, __LINE__);
+ return NULL;
+ }
+
+ /*
+ * Ideally we should lookout for reqs bigger than
+ * those that can be programmed with 256 bytes of
+ * MC buffer, but considering a req size is seldom
+ * going to be word-unaligned and more than 200MB,
+ * we take it easy.
+ * Also, should the limit is reached we'd rather
+ * have the platform increase MC buffer size than
+ * complicating this API driver.
+ */
+ fill_px(&desc->px, dst, src, len);
+
+ return desc;
+}
+
+/* Call after fixing burst size */
+static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
+{
+ struct dma_pl330_chan *pch = desc->pchan;
+ struct pl330_dmac *pl330 = pch->dmac;
+ int burst_len;
+
+ burst_len = pl330->pcfg.data_bus_width / 8;
+ burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
+ burst_len >>= desc->rqcfg.brst_size;
+
+ /* src/dst_burst_len can't be more than 16 */
+ if (burst_len > 16)
+ burst_len = 16;
+
+ while (burst_len > 1) {
+ if (!(len % (burst_len << desc->rqcfg.brst_size)))
+ break;
+ burst_len--;
+ }
+
+ return burst_len;
+}
+
+static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
+ struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
+ size_t period_len, enum dma_transfer_direction direction,
+ unsigned long flags)
+{
+ struct dma_pl330_desc *desc = NULL, *first = NULL;
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct pl330_dmac *pl330 = pch->dmac;
+ unsigned int i;
+ dma_addr_t dst;
+ dma_addr_t src;
+
+ if (len % period_len != 0)
+ return NULL;
+
+ if (!is_slave_direction(direction)) {
+ dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
+ __func__, __LINE__);
+ return NULL;
+ }
+
+ for (i = 0; i < len / period_len; i++) {
+ desc = pl330_get_desc(pch);
+ if (!desc) {
+ dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
+ __func__, __LINE__);
+
+ if (!first)
+ return NULL;
+
+ spin_lock_irqsave(&pl330->pool_lock, flags);
+
+ while (!list_empty(&first->node)) {
+ desc = list_entry(first->node.next,
+ struct dma_pl330_desc, node);
+ list_move_tail(&desc->node, &pl330->desc_pool);
+ }
+
+ list_move_tail(&first->node, &pl330->desc_pool);
+
+ spin_unlock_irqrestore(&pl330->pool_lock, flags);
+
+ return NULL;
+ }
+
+ switch (direction) {
+ case DMA_MEM_TO_DEV:
+ desc->rqcfg.src_inc = 1;
+ desc->rqcfg.dst_inc = 0;
+ src = dma_addr;
+ dst = pch->fifo_addr;
+ break;
+ case DMA_DEV_TO_MEM:
+ desc->rqcfg.src_inc = 0;
+ desc->rqcfg.dst_inc = 1;
+ src = pch->fifo_addr;
+ dst = dma_addr;
+ break;
+ default:
+ break;
+ }
+
+ desc->rqtype = direction;
+ desc->rqcfg.brst_size = pch->burst_sz;
+ desc->rqcfg.brst_len = 1;
+ desc->bytes_requested = period_len;
+ fill_px(&desc->px, dst, src, period_len);
+
+ if (!first)
+ first = desc;
+ else
+ list_add_tail(&desc->node, &first->node);
+
+ dma_addr += period_len;
+ }
+
+ if (!desc)
+ return NULL;
+
+ pch->cyclic = true;
+ desc->txd.flags = flags;
+
+ return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
+ dma_addr_t src, size_t len, unsigned long flags)
+{
+ struct dma_pl330_desc *desc;
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct pl330_dmac *pl330 = pch->dmac;
+ int burst;
+
+ if (unlikely(!pch || !len))
+ return NULL;
+
+ desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
+ if (!desc)
+ return NULL;
+
+ desc->rqcfg.src_inc = 1;
+ desc->rqcfg.dst_inc = 1;
+ desc->rqtype = DMA_MEM_TO_MEM;
+
+ /* Select max possible burst size */
+ burst = pl330->pcfg.data_bus_width / 8;
+
+ /*
+ * Make sure we use a burst size that aligns with all the memcpy
+ * parameters because our DMA programming algorithm doesn't cope with
+ * transfers which straddle an entry in the DMA device's MFIFO.
+ */
+ while ((src | dst | len) & (burst - 1))
+ burst /= 2;
+
+ desc->rqcfg.brst_size = 0;
+ while (burst != (1 << desc->rqcfg.brst_size))
+ desc->rqcfg.brst_size++;
+
+ /*
+ * If burst size is smaller than bus width then make sure we only
+ * transfer one at a time to avoid a burst stradling an MFIFO entry.
+ */
+ if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
+ desc->rqcfg.brst_len = 1;
+
+ desc->rqcfg.brst_len = get_burst_len(desc, len);
+
+ desc->txd.flags = flags;
+
+ return &desc->txd;
+}
+
+static void __pl330_giveback_desc(struct pl330_dmac *pl330,
+ struct dma_pl330_desc *first)
+{
+ unsigned long flags;
+ struct dma_pl330_desc *desc;
+
+ if (!first)
+ return;
+
+ spin_lock_irqsave(&pl330->pool_lock, flags);
+
+ while (!list_empty(&first->node)) {
+ desc = list_entry(first->node.next,
+ struct dma_pl330_desc, node);
+ list_move_tail(&desc->node, &pl330->desc_pool);
+ }
+
+ list_move_tail(&first->node, &pl330->desc_pool);
+
+ spin_unlock_irqrestore(&pl330->pool_lock, flags);
+}
+
+static struct dma_async_tx_descriptor *
+pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_transfer_direction direction,
+ unsigned long flg, void *context)
+{
+ struct dma_pl330_desc *first, *desc = NULL;
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct scatterlist *sg;
+ int i;
+ dma_addr_t addr;
+
+ if (unlikely(!pch || !sgl || !sg_len))
+ return NULL;
+
+ addr = pch->fifo_addr;
+
+ first = NULL;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+
+ desc = pl330_get_desc(pch);
+ if (!desc) {
+ struct pl330_dmac *pl330 = pch->dmac;
+
+ dev_err(pch->dmac->ddma.dev,
+ "%s:%d Unable to fetch desc\n",
+ __func__, __LINE__);
+ __pl330_giveback_desc(pl330, first);
+
+ return NULL;
+ }
+
+ if (!first)
+ first = desc;
+ else
+ list_add_tail(&desc->node, &first->node);
+
+ if (direction == DMA_MEM_TO_DEV) {
+ desc->rqcfg.src_inc = 1;
+ desc->rqcfg.dst_inc = 0;
+ fill_px(&desc->px,
+ addr, sg_dma_address(sg), sg_dma_len(sg));
+ } else {
+ desc->rqcfg.src_inc = 0;
+ desc->rqcfg.dst_inc = 1;
+ fill_px(&desc->px,
+ sg_dma_address(sg), addr, sg_dma_len(sg));
+ }
+
+ desc->rqcfg.brst_size = pch->burst_sz;
+ desc->rqcfg.brst_len = 1;
+ desc->rqtype = direction;
+ desc->bytes_requested = sg_dma_len(sg);
+ }
+
+ /* Return the last desc in the chain */
+ desc->txd.flags = flg;
+ return &desc->txd;
+}
+
+static irqreturn_t pl330_irq_handler(int irq, void *data)
+{
+ if (pl330_update(data))
+ return IRQ_HANDLED;
+ else
+ return IRQ_NONE;
+}
+
+#define PL330_DMA_BUSWIDTHS \
+ BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
+ BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
+
+/*
+ * Runtime PM callbacks are provided by amba/bus.c driver.
+ *
+ * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
+ * bus driver will only disable/enable the clock in runtime PM callbacks.
+ */
+static int __maybe_unused pl330_suspend(struct device *dev)
+{
+ struct amba_device *pcdev = to_amba_device(dev);
+
+ pm_runtime_disable(dev);
+
+ if (!pm_runtime_status_suspended(dev)) {
+ /* amba did not disable the clock */
+ amba_pclk_disable(pcdev);
+ }
+ amba_pclk_unprepare(pcdev);
+
+ return 0;
+}
+
+static int __maybe_unused pl330_resume(struct device *dev)
+{
+ struct amba_device *pcdev = to_amba_device(dev);
+ int ret;
+
+ ret = amba_pclk_prepare(pcdev);
+ if (ret)
+ return ret;
+
+ if (!pm_runtime_status_suspended(dev))
+ ret = amba_pclk_enable(pcdev);
+
+ pm_runtime_enable(dev);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
+
+static int
+pl330_probe(struct amba_device *adev, const struct amba_id *id)
+{
+ struct dma_pl330_platdata *pdat;
+ struct pl330_config *pcfg;
+ struct pl330_dmac *pl330;
+ struct dma_pl330_chan *pch, *_p;
+ struct dma_device *pd;
+ struct resource *res;
+ int i, ret, irq;
+ int num_chan;
+
+ pdat = dev_get_platdata(&adev->dev);
+
+ ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ /* Allocate a new DMAC and its Channels */
+ pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
+ if (!pl330) {
+ dev_err(&adev->dev, "unable to allocate mem\n");
+ return -ENOMEM;
+ }
+
+ pd = &pl330->ddma;
+ pd->dev = &adev->dev;
+
+ pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
+
+ res = &adev->res;
+ pl330->base = devm_ioremap_resource(&adev->dev, res);
+ if (IS_ERR(pl330->base))
+ return PTR_ERR(pl330->base);
+
+ amba_set_drvdata(adev, pl330);
+
+ for (i = 0; i < AMBA_NR_IRQS; i++) {
+ irq = adev->irq[i];
+ if (irq) {
+ ret = devm_request_irq(&adev->dev, irq,
+ pl330_irq_handler, 0,
+ dev_name(&adev->dev), pl330);
+ if (ret)
+ return ret;
+ } else {
+ break;
+ }
+ }
+
+ pcfg = &pl330->pcfg;
+
+ pcfg->periph_id = adev->periphid;
+ ret = pl330_add(pl330);
+ if (ret)
+ return ret;
+
+ INIT_LIST_HEAD(&pl330->desc_pool);
+ spin_lock_init(&pl330->pool_lock);
+
+ /* Create a descriptor pool of default size */
+ if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
+ dev_warn(&adev->dev, "unable to allocate desc\n");
+
+ INIT_LIST_HEAD(&pd->channels);
+
+ /* Initialize channel parameters */
+ if (pdat)
+ num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
+ else
+ num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
+
+ pl330->num_peripherals = num_chan;
+
+ pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
+ if (!pl330->peripherals) {
+ ret = -ENOMEM;
+ dev_err(&adev->dev, "unable to allocate pl330->peripherals\n");
+ goto probe_err2;
+ }
+
+ for (i = 0; i < num_chan; i++) {
+ pch = &pl330->peripherals[i];
+ if (!adev->dev.of_node)
+ pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
+ else
+ pch->chan.private = adev->dev.of_node;
+
+ INIT_LIST_HEAD(&pch->submitted_list);
+ INIT_LIST_HEAD(&pch->work_list);
+ INIT_LIST_HEAD(&pch->completed_list);
+ spin_lock_init(&pch->lock);
+ pch->thread = NULL;
+ pch->chan.device = pd;
+ pch->dmac = pl330;
+
+ /* Add the channel to the DMAC list */
+ list_add_tail(&pch->chan.device_node, &pd->channels);
+ }
+
+ if (pdat) {
+ pd->cap_mask = pdat->cap_mask;
+ } else {
+ dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ if (pcfg->num_peri) {
+ dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+ dma_cap_set(DMA_PRIVATE, pd->cap_mask);
+ }
+ }
+
+ pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
+ pd->device_free_chan_resources = pl330_free_chan_resources;
+ pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
+ pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
+ pd->device_tx_status = pl330_tx_status;
+ pd->device_prep_slave_sg = pl330_prep_slave_sg;
+ pd->device_config = pl330_config;
+ pd->device_pause = pl330_pause;
+ pd->device_terminate_all = pl330_terminate_all;
+ pd->device_issue_pending = pl330_issue_pending;
+ pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
+ pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
+ pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+
+ ret = dma_async_device_register(pd);
+ if (ret) {
+ dev_err(&adev->dev, "unable to register DMAC\n");
+ goto probe_err3;
+ }
+
+ if (adev->dev.of_node) {
+ ret = of_dma_controller_register(adev->dev.of_node,
+ of_dma_pl330_xlate, pl330);
+ if (ret) {
+ dev_err(&adev->dev,
+ "unable to register DMA to the generic DT DMA helpers\n");
+ }
+ }
+
+ adev->dev.dma_parms = &pl330->dma_parms;
+
+ /*
+ * This is the limit for transfers with a buswidth of 1, larger
+ * buswidths will have larger limits.
+ */
+ ret = dma_set_max_seg_size(&adev->dev, 1900800);
+ if (ret)
+ dev_err(&adev->dev, "unable to set the seg size\n");
+
+
+ dev_info(&adev->dev,
+ "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
+ dev_info(&adev->dev,
+ "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
+ pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
+ pcfg->num_peri, pcfg->num_events);
+
+ pm_runtime_irq_safe(&adev->dev);
+ pm_runtime_use_autosuspend(&adev->dev);
+ pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
+ pm_runtime_mark_last_busy(&adev->dev);
+ pm_runtime_put_autosuspend(&adev->dev);
+
+ return 0;
+probe_err3:
+ /* Idle the DMAC */
+ list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
+ chan.device_node) {
+
+ /* Remove the channel */
+ list_del(&pch->chan.device_node);
+
+ /* Flush the channel */
+ if (pch->thread) {
+ pl330_terminate_all(&pch->chan);
+ pl330_free_chan_resources(&pch->chan);
+ }
+ }
+probe_err2:
+ pl330_del(pl330);
+
+ return ret;
+}
+
+static int pl330_remove(struct amba_device *adev)
+{
+ struct pl330_dmac *pl330 = amba_get_drvdata(adev);
+ struct dma_pl330_chan *pch, *_p;
+
+ pm_runtime_get_noresume(pl330->ddma.dev);
+
+ if (adev->dev.of_node)
+ of_dma_controller_free(adev->dev.of_node);
+
+ dma_async_device_unregister(&pl330->ddma);
+
+ /* Idle the DMAC */
+ list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
+ chan.device_node) {
+
+ /* Remove the channel */
+ list_del(&pch->chan.device_node);
+
+ /* Flush the channel */
+ if (pch->thread) {
+ pl330_terminate_all(&pch->chan);
+ pl330_free_chan_resources(&pch->chan);
+ }
+ }
+
+ pl330_del(pl330);
+
+ return 0;
+}
+
+static struct amba_id pl330_ids[] = {
+ {
+ .id = 0x00041330,
+ .mask = 0x000fffff,
+ },
+ { 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, pl330_ids);
+
+static struct amba_driver pl330_driver = {
+ .drv = {
+ .owner = THIS_MODULE,
+ .name = "dma-pl330",
+ .pm = &pl330_pm,
+ },
+ .id_table = pl330_ids,
+ .probe = pl330_probe,
+ .remove = pl330_remove,
+};
+
+module_amba_driver(pl330_driver);
+
+MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
+MODULE_DESCRIPTION("API Driver for PL330 DMAC");
+MODULE_LICENSE("GPL");