diff options
Diffstat (limited to 'kernel/drivers/cpufreq')
94 files changed, 31844 insertions, 0 deletions
diff --git a/kernel/drivers/cpufreq/Kconfig b/kernel/drivers/cpufreq/Kconfig new file mode 100644 index 000000000..659879a56 --- /dev/null +++ b/kernel/drivers/cpufreq/Kconfig @@ -0,0 +1,305 @@ +menu "CPU Frequency scaling" + +config CPU_FREQ + bool "CPU Frequency scaling" + select SRCU + help + CPU Frequency scaling allows you to change the clock speed of + CPUs on the fly. This is a nice method to save power, because + the lower the CPU clock speed, the less power the CPU consumes. + + Note that this driver doesn't automatically change the CPU + clock speed, you need to either enable a dynamic cpufreq governor + (see below) after boot, or use a userspace tool. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. + +if CPU_FREQ + +config CPU_FREQ_GOV_COMMON + bool + +config CPU_FREQ_BOOST_SW + bool + depends on THERMAL + +config CPU_FREQ_STAT + tristate "CPU frequency translation statistics" + default y + help + This driver exports CPU frequency statistics information through sysfs + file system. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_stats. + + If in doubt, say N. + +config CPU_FREQ_STAT_DETAILS + bool "CPU frequency translation statistics details" + depends on CPU_FREQ_STAT + help + This will show detail CPU frequency translation table in sysfs file + system. + + If in doubt, say N. + +choice + prompt "Default CPUFreq governor" + default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ + default CPU_FREQ_DEFAULT_GOV_PERFORMANCE + help + This option sets which CPUFreq governor shall be loaded at + startup. If in doubt, select 'performance'. + +config CPU_FREQ_DEFAULT_GOV_PERFORMANCE + bool "performance" + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'performance' as default. This sets + the frequency statically to the highest frequency supported by + the CPU. + +config CPU_FREQ_DEFAULT_GOV_POWERSAVE + bool "powersave" + select CPU_FREQ_GOV_POWERSAVE + help + Use the CPUFreq governor 'powersave' as default. This sets + the frequency statically to the lowest frequency supported by + the CPU. + +config CPU_FREQ_DEFAULT_GOV_USERSPACE + bool "userspace" + select CPU_FREQ_GOV_USERSPACE + help + Use the CPUFreq governor 'userspace' as default. This allows + you to set the CPU frequency manually or when a userspace + program shall be able to set the CPU dynamically without having + to enable the userspace governor manually. + +config CPU_FREQ_DEFAULT_GOV_ONDEMAND + bool "ondemand" + select CPU_FREQ_GOV_ONDEMAND + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'ondemand' as default. This allows + you to get a full dynamic frequency capable system by simply + loading your cpufreq low-level hardware driver. + Be aware that not all cpufreq drivers support the ondemand + governor. If unsure have a look at the help section of the + driver. Fallback governor will be the performance governor. + +config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE + bool "conservative" + select CPU_FREQ_GOV_CONSERVATIVE + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'conservative' as default. This allows + you to get a full dynamic frequency capable system by simply + loading your cpufreq low-level hardware driver. + Be aware that not all cpufreq drivers support the conservative + governor. If unsure have a look at the help section of the + driver. Fallback governor will be the performance governor. +endchoice + +config CPU_FREQ_GOV_PERFORMANCE + tristate "'performance' governor" + help + This cpufreq governor sets the frequency statically to the + highest available CPU frequency. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_performance. + + If in doubt, say Y. + +config CPU_FREQ_GOV_POWERSAVE + tristate "'powersave' governor" + help + This cpufreq governor sets the frequency statically to the + lowest available CPU frequency. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_powersave. + + If in doubt, say Y. + +config CPU_FREQ_GOV_USERSPACE + tristate "'userspace' governor for userspace frequency scaling" + help + Enable this cpufreq governor when you either want to set the + CPU frequency manually or when a userspace program shall + be able to set the CPU dynamically, like on LART + <http://www.lartmaker.nl/>. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_userspace. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say Y. + +config CPU_FREQ_GOV_ONDEMAND + tristate "'ondemand' cpufreq policy governor" + select CPU_FREQ_GOV_COMMON + help + 'ondemand' - This driver adds a dynamic cpufreq policy governor. + The governor does a periodic polling and + changes frequency based on the CPU utilization. + The support for this governor depends on CPU capability to + do fast frequency switching (i.e, very low latency frequency + transitions). + + To compile this driver as a module, choose M here: the + module will be called cpufreq_ondemand. + + For details, take a look at linux/Documentation/cpu-freq. + + If in doubt, say N. + +config CPU_FREQ_GOV_CONSERVATIVE + tristate "'conservative' cpufreq governor" + depends on CPU_FREQ + select CPU_FREQ_GOV_COMMON + help + 'conservative' - this driver is rather similar to the 'ondemand' + governor both in its source code and its purpose, the difference is + its optimisation for better suitability in a battery powered + environment. The frequency is gracefully increased and decreased + rather than jumping to 100% when speed is required. + + If you have a desktop machine then you should really be considering + the 'ondemand' governor instead, however if you are using a laptop, + PDA or even an AMD64 based computer (due to the unacceptable + step-by-step latency issues between the minimum and maximum frequency + transitions in the CPU) you will probably want to use this governor. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_conservative. + + For details, take a look at linux/Documentation/cpu-freq. + + If in doubt, say N. + +comment "CPU frequency scaling drivers" + +config CPUFREQ_DT + tristate "Generic DT based cpufreq driver" + depends on HAVE_CLK && OF + # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y: + depends on !CPU_THERMAL || THERMAL + select PM_OPP + help + This adds a generic DT based cpufreq driver for frequency management. + It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) + systems which share clock and voltage across all CPUs. + + If in doubt, say N. + +if X86 +source "drivers/cpufreq/Kconfig.x86" +endif + +if ARM || ARM64 +source "drivers/cpufreq/Kconfig.arm" +endif + +if PPC32 || PPC64 +source "drivers/cpufreq/Kconfig.powerpc" +endif + +if AVR32 +config AVR32_AT32AP_CPUFREQ + bool "CPU frequency driver for AT32AP" + depends on PLATFORM_AT32AP + default n + help + This enables the CPU frequency driver for AT32AP processors. + If in doubt, say N. +endif + +if IA64 +config IA64_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. +endif + +if MIPS +config LOONGSON2_CPUFREQ + tristate "Loongson2 CPUFreq Driver" + help + This option adds a CPUFreq driver for loongson processors which + support software configurable cpu frequency. + + Loongson2F and it's successors support this feature. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config LOONGSON1_CPUFREQ + tristate "Loongson1 CPUFreq Driver" + help + This option adds a CPUFreq driver for loongson1 processors which + support software configurable cpu frequency. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. +endif + +if SPARC64 +config SPARC_US3_CPUFREQ + tristate "UltraSPARC-III CPU Frequency driver" + help + This adds the CPUFreq driver for UltraSPARC-III processors. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. + +config SPARC_US2E_CPUFREQ + tristate "UltraSPARC-IIe CPU Frequency driver" + help + This adds the CPUFreq driver for UltraSPARC-IIe processors. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. +endif + +if SUPERH +config SH_CPU_FREQ + tristate "SuperH CPU Frequency driver" + help + This adds the cpufreq driver for SuperH. Any CPU that supports + clock rate rounding through the clock framework can use this + driver. While it will make the kernel slightly larger, this is + harmless for CPUs that don't support rate rounding. The driver + will also generate a notice in the boot log before disabling + itself if the CPU in question is not capable of rate rounding. + + For details, take a look at <file:Documentation/cpu-freq>. + + If unsure, say N. +endif + +config QORIQ_CPUFREQ + tristate "CPU frequency scaling driver for Freescale QorIQ SoCs" + depends on OF && COMMON_CLK && (PPC_E500MC || ARM) + select CLK_QORIQ + help + This adds the CPUFreq driver support for Freescale QorIQ SoCs + which are capable of changing the CPU's frequency dynamically. + +endif +endmenu diff --git a/kernel/drivers/cpufreq/Kconfig.arm b/kernel/drivers/cpufreq/Kconfig.arm new file mode 100644 index 000000000..4f3dbc8cf --- /dev/null +++ b/kernel/drivers/cpufreq/Kconfig.arm @@ -0,0 +1,274 @@ +# +# ARM CPU Frequency scaling drivers +# + +# big LITTLE core layer and glue drivers +config ARM_BIG_LITTLE_CPUFREQ + tristate "Generic ARM big LITTLE CPUfreq driver" + depends on ARM && BIG_LITTLE && ARM_CPU_TOPOLOGY && HAVE_CLK + select PM_OPP + help + This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. + +config ARM_DT_BL_CPUFREQ + tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && OF + help + This enables probing via DT for Generic CPUfreq driver for ARM + big.LITTLE platform. This gets frequency tables from DT. + +config ARM_VEXPRESS_SPC_CPUFREQ + tristate "Versatile Express SPC based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC + help + This add the CPUfreq driver support for Versatile Express + big.LITTLE platforms using SPC for power management. + + +config ARM_EXYNOS_CPUFREQ + tristate "SAMSUNG EXYNOS CPUfreq Driver" + depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 + depends on THERMAL + help + This adds the CPUFreq driver for Samsung EXYNOS platforms. + Supported SoC versions are: + Exynos4210, Exynos4212, Exynos4412, and Exynos5250. + + If in doubt, say N. + +config ARM_EXYNOS4210_CPUFREQ + bool "SAMSUNG EXYNOS4210" + depends on CPU_EXYNOS4210 + depends on ARM_EXYNOS_CPUFREQ + default y + help + This adds the CPUFreq driver for Samsung EXYNOS4210 + SoC (S5PV310 or S5PC210). + + If in doubt, say N. + +config ARM_EXYNOS4X12_CPUFREQ + bool "SAMSUNG EXYNOS4x12" + depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 + depends on ARM_EXYNOS_CPUFREQ + default y + help + This adds the CPUFreq driver for Samsung EXYNOS4X12 + SoC (EXYNOS4212 or EXYNOS4412). + + If in doubt, say N. + +config ARM_EXYNOS5250_CPUFREQ + bool "SAMSUNG EXYNOS5250" + depends on SOC_EXYNOS5250 + depends on ARM_EXYNOS_CPUFREQ + default y + help + This adds the CPUFreq driver for Samsung EXYNOS5250 + SoC. + + If in doubt, say N. + +config ARM_EXYNOS_CPU_FREQ_BOOST_SW + bool "EXYNOS Frequency Overclocking - Software" + depends on ARM_EXYNOS_CPUFREQ && THERMAL + select CPU_FREQ_BOOST_SW + select EXYNOS_THERMAL + help + This driver supports software managed overclocking (BOOST). + It allows usage of special frequencies for Samsung Exynos + processors if thermal conditions are appropriate. + + It requires, for safe operation, thermal framework with properly + defined trip points. + + If in doubt, say N. + +config ARM_EXYNOS5440_CPUFREQ + tristate "SAMSUNG EXYNOS5440" + depends on SOC_EXYNOS5440 + depends on HAVE_CLK && OF + select PM_OPP + default y + help + This adds the CPUFreq driver for Samsung EXYNOS5440 + SoC. The nature of exynos5440 clock controller is + different than previous exynos controllers so not using + the common exynos framework. + + If in doubt, say N. + +config ARM_HIGHBANK_CPUFREQ + tristate "Calxeda Highbank-based" + depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR + default m + help + This adds the CPUFreq driver for Calxeda Highbank SoC + based boards. + + If in doubt, say N. + +config ARM_HISI_ACPU_CPUFREQ + tristate "Hisilicon ACPU CPUfreq driver" + depends on ARCH_HISI && CPUFREQ_DT + select PM_OPP + help + This enables the hisilicon ACPU CPUfreq driver. + + If in doubt, say N. + +config ARM_IMX6Q_CPUFREQ + tristate "Freescale i.MX6 cpufreq support" + depends on ARCH_MXC + depends on REGULATOR_ANATOP + select PM_OPP + help + This adds cpufreq driver support for Freescale i.MX6 series SoCs. + + If in doubt, say N. + +config ARM_INTEGRATOR + tristate "CPUfreq driver for ARM Integrator CPUs" + depends on ARCH_INTEGRATOR + default y + help + This enables the CPUfreq driver for ARM Integrator CPUs. + If in doubt, say Y. + +config ARM_KIRKWOOD_CPUFREQ + def_bool MACH_KIRKWOOD + help + This adds the CPUFreq driver for Marvell Kirkwood + SoCs. + +config ARM_OMAP2PLUS_CPUFREQ + bool "TI OMAP2+" + depends on ARCH_OMAP2PLUS + default ARCH_OMAP2PLUS + +config ARM_S3C_CPUFREQ + bool + help + Internal configuration node for common cpufreq on Samsung SoC + +config ARM_S3C24XX_CPUFREQ + bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" + depends on ARCH_S3C24XX + select ARM_S3C_CPUFREQ + help + This enables the CPUfreq driver for the Samsung S3C24XX family + of CPUs. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. + +config ARM_S3C24XX_CPUFREQ_DEBUG + bool "Debug CPUfreq Samsung driver core" + depends on ARM_S3C24XX_CPUFREQ + help + Enable s3c_freq_dbg for the Samsung S3C CPUfreq core + +config ARM_S3C24XX_CPUFREQ_IODEBUG + bool "Debug CPUfreq Samsung driver IO timing" + depends on ARM_S3C24XX_CPUFREQ + help + Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core + +config ARM_S3C24XX_CPUFREQ_DEBUGFS + bool "Export debugfs for CPUFreq" + depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS + help + Export status information via debugfs. + +config ARM_S3C2410_CPUFREQ + bool + depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 + select S3C2410_CPUFREQ_UTILS + help + CPU Frequency scaling support for S3C2410 + +config ARM_S3C2412_CPUFREQ + bool + depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 + default y + select S3C2412_IOTIMING + help + CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. + +config ARM_S3C2416_CPUFREQ + bool "S3C2416 CPU Frequency scaling support" + depends on CPU_S3C2416 + help + This adds the CPUFreq driver for the Samsung S3C2416 and + S3C2450 SoC. The S3C2416 supports changing the rate of the + armdiv clock source and also entering a so called dynamic + voltage scaling mode in which it is possible to reduce the + core voltage of the CPU. + + If in doubt, say N. + +config ARM_S3C2416_CPUFREQ_VCORESCALE + bool "Allow voltage scaling for S3C2416 arm core" + depends on ARM_S3C2416_CPUFREQ && REGULATOR + help + Enable CPU voltage scaling when entering the dvs mode. + It uses information gathered through existing hardware and + tests but not documented in any datasheet. + + If in doubt, say N. + +config ARM_S3C2440_CPUFREQ + bool "S3C2440/S3C2442 CPU Frequency scaling support" + depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) + select S3C2410_CPUFREQ_UTILS + default y + help + CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. + +config ARM_S3C64XX_CPUFREQ + bool "Samsung S3C64XX" + depends on CPU_S3C6410 + default y + help + This adds the CPUFreq driver for Samsung S3C6410 SoC. + + If in doubt, say N. + +config ARM_S5PV210_CPUFREQ + bool "Samsung S5PV210 and S5PC110" + depends on CPU_S5PV210 + default y + help + This adds the CPUFreq driver for Samsung S5PV210 and + S5PC110 SoCs. + + If in doubt, say N. + +config ARM_SA1100_CPUFREQ + bool + +config ARM_SA1110_CPUFREQ + bool + +config ARM_SPEAR_CPUFREQ + bool "SPEAr CPUFreq support" + depends on PLAT_SPEAR + default y + help + This adds the CPUFreq driver support for SPEAr SOCs. + +config ARM_TEGRA_CPUFREQ + bool "TEGRA CPUFreq support" + depends on ARCH_TEGRA + default y + help + This adds the CPUFreq driver support for TEGRA SOCs. + +config ARM_PXA2xx_CPUFREQ + tristate "Intel PXA2xx CPUfreq driver" + depends on PXA27x || PXA25x + help + This add the CPUFreq driver support for Intel PXA2xx SOCs. + + If in doubt, say N. diff --git a/kernel/drivers/cpufreq/Kconfig.powerpc b/kernel/drivers/cpufreq/Kconfig.powerpc new file mode 100644 index 000000000..3a0595b41 --- /dev/null +++ b/kernel/drivers/cpufreq/Kconfig.powerpc @@ -0,0 +1,55 @@ +config CPU_FREQ_CBE + tristate "CBE frequency scaling" + depends on CBE_RAS && PPC_CELL + default m + help + This adds the cpufreq driver for Cell BE processors. + For details, take a look at <file:Documentation/cpu-freq/>. + If you don't have such processor, say N + +config CPU_FREQ_CBE_PMI + bool "CBE frequency scaling using PMI interface" + depends on CPU_FREQ_CBE + default n + help + Select this, if you want to use the PMI interface to switch + frequencies. Using PMI, the processor will not only be able to run at + lower speed, but also at lower core voltage. + +config CPU_FREQ_MAPLE + bool "Support for Maple 970FX Evaluation Board" + depends on PPC_MAPLE + help + This adds support for frequency switching on Maple 970FX + Evaluation Board and compatible boards (IBM JS2x blades). + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on ADB_PMU && PPC32 + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on PPC_PMAC && PPC64 + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC_PASEMI_CPUFREQ + bool "Support for PA Semi PWRficient" + depends on PPC_PASEMI + default y + help + This adds the support for frequency switching on PA Semi + PWRficient processors. + +config POWERNV_CPUFREQ + tristate "CPU frequency scaling for IBM POWERNV platform" + depends on PPC_POWERNV + default y + help + This adds support for CPU frequency switching on IBM POWERNV + platform diff --git a/kernel/drivers/cpufreq/Kconfig.x86 b/kernel/drivers/cpufreq/Kconfig.x86 new file mode 100644 index 000000000..8f23161d8 --- /dev/null +++ b/kernel/drivers/cpufreq/Kconfig.x86 @@ -0,0 +1,297 @@ +# +# x86 CPU Frequency scaling drivers +# + +config X86_INTEL_PSTATE + bool "Intel P state control" + depends on X86 + help + This driver provides a P state for Intel core processors. + The driver implements an internal governor and will become + the scaling driver and governor for Sandy bridge processors. + + When this driver is enabled it will become the preferred + scaling driver for Sandy bridge processors. + + If in doubt, say N. + +config X86_PCC_CPUFREQ + tristate "Processor Clocking Control interface driver" + depends on ACPI && ACPI_PROCESSOR + help + This driver adds support for the PCC interface. + + For details, take a look at: + <file:Documentation/cpu-freq/pcc-cpufreq.txt>. + + To compile this driver as a module, choose M here: the + module will be called pcc-cpufreq. + + If in doubt, say N. + +config X86_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + This driver also supports Intel Enhanced Speedstep and newer + AMD CPUs. + + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_ACPI_CPUFREQ_CPB + default y + bool "Legacy cpb sysfs knob support for AMD CPUs" + depends on X86_ACPI_CPUFREQ && CPU_SUP_AMD + help + The powernow-k8 driver used to provide a sysfs knob called "cpb" + to disable the Core Performance Boosting feature of AMD CPUs. This + file has now been superseded by the more generic "boost" entry. + + By enabling this option the acpi_cpufreq driver provides the old + entry in addition to the new boost ones, for compatibility reasons. + +config X86_SFI_CPUFREQ + tristate "SFI Performance-States driver" + depends on X86_INTEL_MID && SFI + help + This adds a CPUFreq driver for some Silvermont based Intel Atom + architectures like Z34xx and Z35xx which enumerate processor + performance states through SFI. + + If in doubt, say N. + +config ELAN_CPUFREQ + tristate "AMD Elan SC400 and SC410" + depends on MELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC400 and SC410 + processors. + + You need to specify the processor maximum speed as boot + parameter: elanfreq=maxspeed (in kHz) or as module + parameter "max_freq". + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config SC520_CPUFREQ + tristate "AMD Elan SC520" + depends on MELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + + +config X86_POWERNOW_K6 + tristate "AMD Mobile K6-2/K6-3 PowerNow!" + depends on X86_32 + help + This adds the CPUFreq driver for mobile AMD K6-2+ and mobile + AMD K6-3+ processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K7 + tristate "AMD Mobile Athlon/Duron PowerNow!" + depends on X86_32 + help + This adds the CPUFreq driver for mobile AMD K7 mobile processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K7_ACPI + bool + depends on X86_POWERNOW_K7 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) + depends on X86_32 + default y + +config X86_POWERNOW_K8 + tristate "AMD Opteron/Athlon64 PowerNow!" + depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ && !PREEMPT_RT_BASE + help + This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors. + Support for K10 and newer processors is now in acpi-cpufreq. + + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + + For details, take a look at <file:Documentation/cpu-freq/>. + +config X86_AMD_FREQ_SENSITIVITY + tristate "AMD frequency sensitivity feedback powersave bias" + depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD + help + This adds AMD-specific powersave bias function to the ondemand + governor, which allows it to make more power-conscious frequency + change decisions based on feedback from hardware (available on AMD + Family 16h and above). + + Hardware feedback tells software how "sensitive" to frequency changes + the CPUs' workloads are. CPU-bound workloads will be more sensitive + -- they will perform better as frequency increases. Memory/IO-bound + workloads will be less sensitive -- they will not necessarily perform + better as frequency increases. + + If in doubt, say N. + +config X86_GX_SUSPMOD + tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" + depends on X86_32 && PCI + help + This add the CPUFreq driver for NatSemi Geode processors which + support suspend modulation. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO + tristate "Intel Enhanced SpeedStep (deprecated)" + select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 + depends on X86_32 || (X86_64 && ACPI_PROCESSOR) + help + This is deprecated and this functionality is now merged into + acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of + speedstep_centrino. + This adds the CPUFreq driver for Enhanced SpeedStep enabled + mobile CPUs. This means Intel Pentium M (Centrino) CPUs + or 64bit enabled Intel Xeons. + + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO_TABLE + bool "Built-in tables for Banias CPUs" + depends on X86_32 && X86_SPEEDSTEP_CENTRINO + default y + help + Use built-in tables for Banias CPUs if ACPI encoding + is not available. + + If in doubt, say N. + +config X86_SPEEDSTEP_ICH + tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" + depends on X86_32 + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all + mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, + ICH3 or ICH4 southbridge. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_SMI + tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" + depends on X86_32 + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) + on systems which have an Intel 440BX/ZX/MX southbridge. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_P4_CLOCKMOD + tristate "Intel Pentium 4 clock modulation" + help + This adds the CPUFreq driver for Intel Pentium 4 / XEON + processors. When enabled it will lower CPU temperature by skipping + clocks. + + This driver should be only used in exceptional + circumstances when very low power is needed because it causes severe + slowdowns and noticeable latencies. Normally Speedstep should be used + instead. + + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. + + For details, take a look at <file:Documentation/cpu-freq/>. + + Unless you are absolutely sure say N. + +config X86_CPUFREQ_NFORCE2 + tristate "nVidia nForce2 FSB changing" + depends on X86_32 + help + This adds the CPUFreq driver for FSB changing on nVidia nForce2 + platforms. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_LONGRUN + tristate "Transmeta LongRun" + depends on X86_32 + help + This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors + which support LongRun. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_LONGHAUL + tristate "VIA Cyrix III Longhaul" + depends on X86_32 && ACPI_PROCESSOR + help + This adds the CPUFreq driver for VIA Samuel/CyrixIII, + VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T + processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" + depends on X86_32 && ACPI_PROCESSOR + help + This adds the CPUFreq driver for VIA C7 processors. However, this driver + does not have any safeguards to prevent operating the CPU out of spec + and is thus considered dangerous. Please use the regular ACPI cpufreq + driver, enabled by CONFIG_X86_ACPI_CPUFREQ. + + If in doubt, say N. + +comment "shared options" + +config X86_SPEEDSTEP_LIB + tristate + default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) + +config X86_SPEEDSTEP_RELAXED_CAP_CHECK + bool "Relaxed speedstep capability checks" + depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) + help + Don't perform all checks for a speedstep capable system which would + normally be done. Some ancient or strange systems, though speedstep + capable, don't always indicate that they are speedstep capable. This + option lets the probing code bypass some of those checks if the + parameter "relaxed_check=1" is passed to the module. + diff --git a/kernel/drivers/cpufreq/Makefile b/kernel/drivers/cpufreq/Makefile new file mode 100644 index 000000000..cdce92ae2 --- /dev/null +++ b/kernel/drivers/cpufreq/Makefile @@ -0,0 +1,107 @@ +# CPUfreq core +obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o +obj-$(CONFIG_PM_OPP) += cpufreq_opp.o + +# CPUfreq stats +obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o + +# CPUfreq governors +obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o +obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o +obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o +obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o +obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o +obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o + +obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o + +################################################################################## +# x86 drivers. +# Link order matters. K8 is preferred to ACPI because of firmware bugs in early +# K8 systems. This is still the case but acpi-cpufreq errors out so that +# powernow-k8 can load then. ACPI is preferred to all other hardware-specific drivers. +# speedstep-* is preferred over p4-clockmod. + +obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o +obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o +obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o +obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o +obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o +obj-$(CONFIG_X86_LONGHAUL) += longhaul.o +obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o +obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o +obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o +obj-$(CONFIG_X86_LONGRUN) += longrun.o +obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o +obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o +obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o +obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o +obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o +obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o +obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o +obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o +obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o +obj-$(CONFIG_X86_SFI_CPUFREQ) += sfi-cpufreq.o + +################################################################################## +# ARM SoC drivers +obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o +# big LITTLE per platform glues. Keep DT_BL_CPUFREQ as the last entry in all big +# LITTLE drivers, so that it is probed last. +obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o + +obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o +obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o +obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o +arm-exynos-cpufreq-y := exynos-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o +obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o +obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o +obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o +obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o +obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o +obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o +obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o +obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o +obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o +obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o +obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o +obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o +obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o +obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o +obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o +obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o +obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o +obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o +obj-$(CONFIG_ARM_TEGRA_CPUFREQ) += tegra-cpufreq.o +obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o + +################################################################################## +# PowerPC platform drivers +obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o +ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o +obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o +obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o +obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o +obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o +obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o + +################################################################################## +# Other platform drivers +obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o +obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o +obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o +obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o +obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o +obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o +obj-$(CONFIG_LOONGSON1_CPUFREQ) += ls1x-cpufreq.o +obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o +obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o +obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o +obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o diff --git a/kernel/drivers/cpufreq/acpi-cpufreq.c b/kernel/drivers/cpufreq/acpi-cpufreq.c new file mode 100644 index 000000000..b0c18ed8d --- /dev/null +++ b/kernel/drivers/cpufreq/acpi-cpufreq.c @@ -0,0 +1,1011 @@ +/* + * acpi-cpufreq.c - ACPI Processor P-States Driver + * + * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> + * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> + * Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> + * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/compiler.h> +#include <linux/dmi.h> +#include <linux/slab.h> + +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/uaccess.h> + +#include <acpi/processor.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpufeature.h> + +MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); +MODULE_DESCRIPTION("ACPI Processor P-States Driver"); +MODULE_LICENSE("GPL"); + +#define PFX "acpi-cpufreq: " + +enum { + UNDEFINED_CAPABLE = 0, + SYSTEM_INTEL_MSR_CAPABLE, + SYSTEM_AMD_MSR_CAPABLE, + SYSTEM_IO_CAPABLE, +}; + +#define INTEL_MSR_RANGE (0xffff) +#define AMD_MSR_RANGE (0x7) + +#define MSR_K7_HWCR_CPB_DIS (1ULL << 25) + +struct acpi_cpufreq_data { + struct acpi_processor_performance *acpi_data; + struct cpufreq_frequency_table *freq_table; + unsigned int resume; + unsigned int cpu_feature; + cpumask_var_t freqdomain_cpus; +}; + +static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data); + +/* acpi_perf_data is a pointer to percpu data. */ +static struct acpi_processor_performance __percpu *acpi_perf_data; + +static struct cpufreq_driver acpi_cpufreq_driver; + +static unsigned int acpi_pstate_strict; +static struct msr __percpu *msrs; + +static bool boost_state(unsigned int cpu) +{ + u32 lo, hi; + u64 msr; + + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + rdmsr_on_cpu(cpu, MSR_IA32_MISC_ENABLE, &lo, &hi); + msr = lo | ((u64)hi << 32); + return !(msr & MSR_IA32_MISC_ENABLE_TURBO_DISABLE); + case X86_VENDOR_AMD: + rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); + msr = lo | ((u64)hi << 32); + return !(msr & MSR_K7_HWCR_CPB_DIS); + } + return false; +} + +static void boost_set_msrs(bool enable, const struct cpumask *cpumask) +{ + u32 cpu; + u32 msr_addr; + u64 msr_mask; + + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + msr_addr = MSR_IA32_MISC_ENABLE; + msr_mask = MSR_IA32_MISC_ENABLE_TURBO_DISABLE; + break; + case X86_VENDOR_AMD: + msr_addr = MSR_K7_HWCR; + msr_mask = MSR_K7_HWCR_CPB_DIS; + break; + default: + return; + } + + rdmsr_on_cpus(cpumask, msr_addr, msrs); + + for_each_cpu(cpu, cpumask) { + struct msr *reg = per_cpu_ptr(msrs, cpu); + if (enable) + reg->q &= ~msr_mask; + else + reg->q |= msr_mask; + } + + wrmsr_on_cpus(cpumask, msr_addr, msrs); +} + +static int _store_boost(int val) +{ + get_online_cpus(); + boost_set_msrs(val, cpu_online_mask); + put_online_cpus(); + pr_debug("Core Boosting %sabled.\n", val ? "en" : "dis"); + + return 0; +} + +static ssize_t show_freqdomain_cpus(struct cpufreq_policy *policy, char *buf) +{ + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); + + return cpufreq_show_cpus(data->freqdomain_cpus, buf); +} + +cpufreq_freq_attr_ro(freqdomain_cpus); + +#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB +static ssize_t store_boost(const char *buf, size_t count) +{ + int ret; + unsigned long val = 0; + + if (!acpi_cpufreq_driver.boost_supported) + return -EINVAL; + + ret = kstrtoul(buf, 10, &val); + if (ret || (val > 1)) + return -EINVAL; + + _store_boost((int) val); + + return count; +} + +static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, + size_t count) +{ + return store_boost(buf, count); +} + +static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf) +{ + return sprintf(buf, "%u\n", acpi_cpufreq_driver.boost_enabled); +} + +cpufreq_freq_attr_rw(cpb); +#endif + +static int check_est_cpu(unsigned int cpuid) +{ + struct cpuinfo_x86 *cpu = &cpu_data(cpuid); + + return cpu_has(cpu, X86_FEATURE_EST); +} + +static int check_amd_hwpstate_cpu(unsigned int cpuid) +{ + struct cpuinfo_x86 *cpu = &cpu_data(cpuid); + + return cpu_has(cpu, X86_FEATURE_HW_PSTATE); +} + +static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) +{ + struct acpi_processor_performance *perf; + int i; + + perf = data->acpi_data; + + for (i = 0; i < perf->state_count; i++) { + if (value == perf->states[i].status) + return data->freq_table[i].frequency; + } + return 0; +} + +static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) +{ + struct cpufreq_frequency_table *pos; + struct acpi_processor_performance *perf; + + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + msr &= AMD_MSR_RANGE; + else + msr &= INTEL_MSR_RANGE; + + perf = data->acpi_data; + + cpufreq_for_each_entry(pos, data->freq_table) + if (msr == perf->states[pos->driver_data].status) + return pos->frequency; + return data->freq_table[0].frequency; +} + +static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data) +{ + switch (data->cpu_feature) { + case SYSTEM_INTEL_MSR_CAPABLE: + case SYSTEM_AMD_MSR_CAPABLE: + return extract_msr(val, data); + case SYSTEM_IO_CAPABLE: + return extract_io(val, data); + default: + return 0; + } +} + +struct msr_addr { + u32 reg; +}; + +struct io_addr { + u16 port; + u8 bit_width; +}; + +struct drv_cmd { + unsigned int type; + const struct cpumask *mask; + union { + struct msr_addr msr; + struct io_addr io; + } addr; + u32 val; +}; + +/* Called via smp_call_function_single(), on the target CPU */ +static void do_drv_read(void *_cmd) +{ + struct drv_cmd *cmd = _cmd; + u32 h; + + switch (cmd->type) { + case SYSTEM_INTEL_MSR_CAPABLE: + case SYSTEM_AMD_MSR_CAPABLE: + rdmsr(cmd->addr.msr.reg, cmd->val, h); + break; + case SYSTEM_IO_CAPABLE: + acpi_os_read_port((acpi_io_address)cmd->addr.io.port, + &cmd->val, + (u32)cmd->addr.io.bit_width); + break; + default: + break; + } +} + +/* Called via smp_call_function_many(), on the target CPUs */ +static void do_drv_write(void *_cmd) +{ + struct drv_cmd *cmd = _cmd; + u32 lo, hi; + + switch (cmd->type) { + case SYSTEM_INTEL_MSR_CAPABLE: + rdmsr(cmd->addr.msr.reg, lo, hi); + lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); + wrmsr(cmd->addr.msr.reg, lo, hi); + break; + case SYSTEM_AMD_MSR_CAPABLE: + wrmsr(cmd->addr.msr.reg, cmd->val, 0); + break; + case SYSTEM_IO_CAPABLE: + acpi_os_write_port((acpi_io_address)cmd->addr.io.port, + cmd->val, + (u32)cmd->addr.io.bit_width); + break; + default: + break; + } +} + +static void drv_read(struct drv_cmd *cmd) +{ + int err; + cmd->val = 0; + + err = smp_call_function_any(cmd->mask, do_drv_read, cmd, 1); + WARN_ON_ONCE(err); /* smp_call_function_any() was buggy? */ +} + +static void drv_write(struct drv_cmd *cmd) +{ + int this_cpu; + + this_cpu = get_cpu(); + if (cpumask_test_cpu(this_cpu, cmd->mask)) + do_drv_write(cmd); + smp_call_function_many(cmd->mask, do_drv_write, cmd, 1); + put_cpu(); +} + +static u32 get_cur_val(const struct cpumask *mask) +{ + struct acpi_processor_performance *perf; + struct drv_cmd cmd; + + if (unlikely(cpumask_empty(mask))) + return 0; + + switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) { + case SYSTEM_INTEL_MSR_CAPABLE: + cmd.type = SYSTEM_INTEL_MSR_CAPABLE; + cmd.addr.msr.reg = MSR_IA32_PERF_CTL; + break; + case SYSTEM_AMD_MSR_CAPABLE: + cmd.type = SYSTEM_AMD_MSR_CAPABLE; + cmd.addr.msr.reg = MSR_AMD_PERF_CTL; + break; + case SYSTEM_IO_CAPABLE: + cmd.type = SYSTEM_IO_CAPABLE; + perf = per_cpu(acfreq_data, cpumask_first(mask))->acpi_data; + cmd.addr.io.port = perf->control_register.address; + cmd.addr.io.bit_width = perf->control_register.bit_width; + break; + default: + return 0; + } + + cmd.mask = mask; + drv_read(&cmd); + + pr_debug("get_cur_val = %u\n", cmd.val); + + return cmd.val; +} + +static unsigned int get_cur_freq_on_cpu(unsigned int cpu) +{ + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, cpu); + unsigned int freq; + unsigned int cached_freq; + + pr_debug("get_cur_freq_on_cpu (%d)\n", cpu); + + if (unlikely(data == NULL || + data->acpi_data == NULL || data->freq_table == NULL)) { + return 0; + } + + cached_freq = data->freq_table[data->acpi_data->state].frequency; + freq = extract_freq(get_cur_val(cpumask_of(cpu)), data); + if (freq != cached_freq) { + /* + * The dreaded BIOS frequency change behind our back. + * Force set the frequency on next target call. + */ + data->resume = 1; + } + + pr_debug("cur freq = %u\n", freq); + + return freq; +} + +static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, + struct acpi_cpufreq_data *data) +{ + unsigned int cur_freq; + unsigned int i; + + for (i = 0; i < 100; i++) { + cur_freq = extract_freq(get_cur_val(mask), data); + if (cur_freq == freq) + return 1; + udelay(10); + } + return 0; +} + +static int acpi_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); + struct acpi_processor_performance *perf; + struct drv_cmd cmd; + unsigned int next_perf_state = 0; /* Index into perf table */ + int result = 0; + + if (unlikely(data == NULL || + data->acpi_data == NULL || data->freq_table == NULL)) { + return -ENODEV; + } + + perf = data->acpi_data; + next_perf_state = data->freq_table[index].driver_data; + if (perf->state == next_perf_state) { + if (unlikely(data->resume)) { + pr_debug("Called after resume, resetting to P%d\n", + next_perf_state); + data->resume = 0; + } else { + pr_debug("Already at target state (P%d)\n", + next_perf_state); + goto out; + } + } + + switch (data->cpu_feature) { + case SYSTEM_INTEL_MSR_CAPABLE: + cmd.type = SYSTEM_INTEL_MSR_CAPABLE; + cmd.addr.msr.reg = MSR_IA32_PERF_CTL; + cmd.val = (u32) perf->states[next_perf_state].control; + break; + case SYSTEM_AMD_MSR_CAPABLE: + cmd.type = SYSTEM_AMD_MSR_CAPABLE; + cmd.addr.msr.reg = MSR_AMD_PERF_CTL; + cmd.val = (u32) perf->states[next_perf_state].control; + break; + case SYSTEM_IO_CAPABLE: + cmd.type = SYSTEM_IO_CAPABLE; + cmd.addr.io.port = perf->control_register.address; + cmd.addr.io.bit_width = perf->control_register.bit_width; + cmd.val = (u32) perf->states[next_perf_state].control; + break; + default: + result = -ENODEV; + goto out; + } + + /* cpufreq holds the hotplug lock, so we are safe from here on */ + if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY) + cmd.mask = policy->cpus; + else + cmd.mask = cpumask_of(policy->cpu); + + drv_write(&cmd); + + if (acpi_pstate_strict) { + if (!check_freqs(cmd.mask, data->freq_table[index].frequency, + data)) { + pr_debug("acpi_cpufreq_target failed (%d)\n", + policy->cpu); + result = -EAGAIN; + } + } + + if (!result) + perf->state = next_perf_state; + +out: + return result; +} + +static unsigned long +acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) +{ + struct acpi_processor_performance *perf = data->acpi_data; + + if (cpu_khz) { + /* search the closest match to cpu_khz */ + unsigned int i; + unsigned long freq; + unsigned long freqn = perf->states[0].core_frequency * 1000; + + for (i = 0; i < (perf->state_count-1); i++) { + freq = freqn; + freqn = perf->states[i+1].core_frequency * 1000; + if ((2 * cpu_khz) > (freqn + freq)) { + perf->state = i; + return freq; + } + } + perf->state = perf->state_count-1; + return freqn; + } else { + /* assume CPU is at P0... */ + perf->state = 0; + return perf->states[0].core_frequency * 1000; + } +} + +static void free_acpi_perf_data(void) +{ + unsigned int i; + + /* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */ + for_each_possible_cpu(i) + free_cpumask_var(per_cpu_ptr(acpi_perf_data, i) + ->shared_cpu_map); + free_percpu(acpi_perf_data); +} + +static int boost_notify(struct notifier_block *nb, unsigned long action, + void *hcpu) +{ + unsigned cpu = (long)hcpu; + const struct cpumask *cpumask; + + cpumask = get_cpu_mask(cpu); + + /* + * Clear the boost-disable bit on the CPU_DOWN path so that + * this cpu cannot block the remaining ones from boosting. On + * the CPU_UP path we simply keep the boost-disable flag in + * sync with the current global state. + */ + + switch (action) { + case CPU_UP_PREPARE: + case CPU_UP_PREPARE_FROZEN: + boost_set_msrs(acpi_cpufreq_driver.boost_enabled, cpumask); + break; + + case CPU_DOWN_PREPARE: + case CPU_DOWN_PREPARE_FROZEN: + boost_set_msrs(1, cpumask); + break; + + default: + break; + } + + return NOTIFY_OK; +} + + +static struct notifier_block boost_nb = { + .notifier_call = boost_notify, +}; + +/* + * acpi_cpufreq_early_init - initialize ACPI P-States library + * + * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c) + * in order to determine correct frequency and voltage pairings. We can + * do _PDC and _PSD and find out the processor dependency for the + * actual init that will happen later... + */ +static int __init acpi_cpufreq_early_init(void) +{ + unsigned int i; + pr_debug("acpi_cpufreq_early_init\n"); + + acpi_perf_data = alloc_percpu(struct acpi_processor_performance); + if (!acpi_perf_data) { + pr_debug("Memory allocation error for acpi_perf_data.\n"); + return -ENOMEM; + } + for_each_possible_cpu(i) { + if (!zalloc_cpumask_var_node( + &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, + GFP_KERNEL, cpu_to_node(i))) { + + /* Freeing a NULL pointer is OK: alloc_percpu zeroes. */ + free_acpi_perf_data(); + return -ENOMEM; + } + } + + /* Do initialization in ACPI core */ + acpi_processor_preregister_performance(acpi_perf_data); + return 0; +} + +#ifdef CONFIG_SMP +/* + * Some BIOSes do SW_ANY coordination internally, either set it up in hw + * or do it in BIOS firmware and won't inform about it to OS. If not + * detected, this has a side effect of making CPU run at a different speed + * than OS intended it to run at. Detect it and handle it cleanly. + */ +static int bios_with_sw_any_bug; + +static int sw_any_bug_found(const struct dmi_system_id *d) +{ + bios_with_sw_any_bug = 1; + return 0; +} + +static const struct dmi_system_id sw_any_bug_dmi_table[] = { + { + .callback = sw_any_bug_found, + .ident = "Supermicro Server X6DLP", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), + DMI_MATCH(DMI_BIOS_VERSION, "080010"), + DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), + }, + }, + { } +}; + +static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) +{ + /* Intel Xeon Processor 7100 Series Specification Update + * http://www.intel.com/Assets/PDF/specupdate/314554.pdf + * AL30: A Machine Check Exception (MCE) Occurring during an + * Enhanced Intel SpeedStep Technology Ratio Change May Cause + * Both Processor Cores to Lock Up. */ + if (c->x86_vendor == X86_VENDOR_INTEL) { + if ((c->x86 == 15) && + (c->x86_model == 6) && + (c->x86_mask == 8)) { + printk(KERN_INFO "acpi-cpufreq: Intel(R) " + "Xeon(R) 7100 Errata AL30, processors may " + "lock up on frequency changes: disabling " + "acpi-cpufreq.\n"); + return -ENODEV; + } + } + return 0; +} +#endif + +static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + unsigned int valid_states = 0; + unsigned int cpu = policy->cpu; + struct acpi_cpufreq_data *data; + unsigned int result = 0; + struct cpuinfo_x86 *c = &cpu_data(policy->cpu); + struct acpi_processor_performance *perf; +#ifdef CONFIG_SMP + static int blacklisted; +#endif + + pr_debug("acpi_cpufreq_cpu_init\n"); + +#ifdef CONFIG_SMP + if (blacklisted) + return blacklisted; + blacklisted = acpi_cpufreq_blacklist(c); + if (blacklisted) + return blacklisted; +#endif + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (!zalloc_cpumask_var(&data->freqdomain_cpus, GFP_KERNEL)) { + result = -ENOMEM; + goto err_free; + } + + data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu); + per_cpu(acfreq_data, cpu) = data; + + if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) + acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; + + result = acpi_processor_register_performance(data->acpi_data, cpu); + if (result) + goto err_free_mask; + + perf = data->acpi_data; + policy->shared_type = perf->shared_type; + + /* + * Will let policy->cpus know about dependency only when software + * coordination is required. + */ + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || + policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { + cpumask_copy(policy->cpus, perf->shared_cpu_map); + } + cpumask_copy(data->freqdomain_cpus, perf->shared_cpu_map); + +#ifdef CONFIG_SMP + dmi_check_system(sw_any_bug_dmi_table); + if (bios_with_sw_any_bug && !policy_is_shared(policy)) { + policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; + cpumask_copy(policy->cpus, cpu_core_mask(cpu)); + } + + if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) { + cpumask_clear(policy->cpus); + cpumask_set_cpu(cpu, policy->cpus); + cpumask_copy(data->freqdomain_cpus, cpu_sibling_mask(cpu)); + policy->shared_type = CPUFREQ_SHARED_TYPE_HW; + pr_info_once(PFX "overriding BIOS provided _PSD data\n"); + } +#endif + + /* capability check */ + if (perf->state_count <= 1) { + pr_debug("No P-States\n"); + result = -ENODEV; + goto err_unreg; + } + + if (perf->control_register.space_id != perf->status_register.space_id) { + result = -ENODEV; + goto err_unreg; + } + + switch (perf->control_register.space_id) { + case ACPI_ADR_SPACE_SYSTEM_IO: + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 == 0xf) { + pr_debug("AMD K8 systems must use native drivers.\n"); + result = -ENODEV; + goto err_unreg; + } + pr_debug("SYSTEM IO addr space\n"); + data->cpu_feature = SYSTEM_IO_CAPABLE; + break; + case ACPI_ADR_SPACE_FIXED_HARDWARE: + pr_debug("HARDWARE addr space\n"); + if (check_est_cpu(cpu)) { + data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; + break; + } + if (check_amd_hwpstate_cpu(cpu)) { + data->cpu_feature = SYSTEM_AMD_MSR_CAPABLE; + break; + } + result = -ENODEV; + goto err_unreg; + default: + pr_debug("Unknown addr space %d\n", + (u32) (perf->control_register.space_id)); + result = -ENODEV; + goto err_unreg; + } + + data->freq_table = kzalloc(sizeof(*data->freq_table) * + (perf->state_count+1), GFP_KERNEL); + if (!data->freq_table) { + result = -ENOMEM; + goto err_unreg; + } + + /* detect transition latency */ + policy->cpuinfo.transition_latency = 0; + for (i = 0; i < perf->state_count; i++) { + if ((perf->states[i].transition_latency * 1000) > + policy->cpuinfo.transition_latency) + policy->cpuinfo.transition_latency = + perf->states[i].transition_latency * 1000; + } + + /* Check for high latency (>20uS) from buggy BIOSes, like on T42 */ + if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && + policy->cpuinfo.transition_latency > 20 * 1000) { + policy->cpuinfo.transition_latency = 20 * 1000; + printk_once(KERN_INFO + "P-state transition latency capped at 20 uS\n"); + } + + /* table init */ + for (i = 0; i < perf->state_count; i++) { + if (i > 0 && perf->states[i].core_frequency >= + data->freq_table[valid_states-1].frequency / 1000) + continue; + + data->freq_table[valid_states].driver_data = i; + data->freq_table[valid_states].frequency = + perf->states[i].core_frequency * 1000; + valid_states++; + } + data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; + perf->state = 0; + + result = cpufreq_table_validate_and_show(policy, data->freq_table); + if (result) + goto err_freqfree; + + if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) + printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); + + switch (perf->control_register.space_id) { + case ACPI_ADR_SPACE_SYSTEM_IO: + /* + * The core will not set policy->cur, because + * cpufreq_driver->get is NULL, so we need to set it here. + * However, we have to guess it, because the current speed is + * unknown and not detectable via IO ports. + */ + policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); + break; + case ACPI_ADR_SPACE_FIXED_HARDWARE: + acpi_cpufreq_driver.get = get_cur_freq_on_cpu; + break; + default: + break; + } + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + pr_debug("CPU%u - ACPI performance management activated.\n", cpu); + for (i = 0; i < perf->state_count; i++) + pr_debug(" %cP%d: %d MHz, %d mW, %d uS\n", + (i == perf->state ? '*' : ' '), i, + (u32) perf->states[i].core_frequency, + (u32) perf->states[i].power, + (u32) perf->states[i].transition_latency); + + /* + * the first call to ->target() should result in us actually + * writing something to the appropriate registers. + */ + data->resume = 1; + + return result; + +err_freqfree: + kfree(data->freq_table); +err_unreg: + acpi_processor_unregister_performance(perf, cpu); +err_free_mask: + free_cpumask_var(data->freqdomain_cpus); +err_free: + kfree(data); + per_cpu(acfreq_data, cpu) = NULL; + + return result; +} + +static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); + + pr_debug("acpi_cpufreq_cpu_exit\n"); + + if (data) { + per_cpu(acfreq_data, policy->cpu) = NULL; + acpi_processor_unregister_performance(data->acpi_data, + policy->cpu); + free_cpumask_var(data->freqdomain_cpus); + kfree(data->freq_table); + kfree(data); + } + + return 0; +} + +static int acpi_cpufreq_resume(struct cpufreq_policy *policy) +{ + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); + + pr_debug("acpi_cpufreq_resume\n"); + + data->resume = 1; + + return 0; +} + +static struct freq_attr *acpi_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &freqdomain_cpus, + NULL, /* this is a placeholder for cpb, do not remove */ + NULL, +}; + +static struct cpufreq_driver acpi_cpufreq_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = acpi_cpufreq_target, + .bios_limit = acpi_processor_get_bios_limit, + .init = acpi_cpufreq_cpu_init, + .exit = acpi_cpufreq_cpu_exit, + .resume = acpi_cpufreq_resume, + .name = "acpi-cpufreq", + .attr = acpi_cpufreq_attr, + .set_boost = _store_boost, +}; + +static void __init acpi_cpufreq_boost_init(void) +{ + if (boot_cpu_has(X86_FEATURE_CPB) || boot_cpu_has(X86_FEATURE_IDA)) { + msrs = msrs_alloc(); + + if (!msrs) + return; + + acpi_cpufreq_driver.boost_supported = true; + acpi_cpufreq_driver.boost_enabled = boost_state(0); + + cpu_notifier_register_begin(); + + /* Force all MSRs to the same value */ + boost_set_msrs(acpi_cpufreq_driver.boost_enabled, + cpu_online_mask); + + __register_cpu_notifier(&boost_nb); + + cpu_notifier_register_done(); + } +} + +static void acpi_cpufreq_boost_exit(void) +{ + if (msrs) { + unregister_cpu_notifier(&boost_nb); + + msrs_free(msrs); + msrs = NULL; + } +} + +static int __init acpi_cpufreq_init(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + /* don't keep reloading if cpufreq_driver exists */ + if (cpufreq_get_current_driver()) + return -EEXIST; + + pr_debug("acpi_cpufreq_init\n"); + + ret = acpi_cpufreq_early_init(); + if (ret) + return ret; + +#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB + /* this is a sysfs file with a strange name and an even stranger + * semantic - per CPU instantiation, but system global effect. + * Lets enable it only on AMD CPUs for compatibility reasons and + * only if configured. This is considered legacy code, which + * will probably be removed at some point in the future. + */ + if (check_amd_hwpstate_cpu(0)) { + struct freq_attr **iter; + + pr_debug("adding sysfs entry for cpb\n"); + + for (iter = acpi_cpufreq_attr; *iter != NULL; iter++) + ; + + /* make sure there is a terminator behind it */ + if (iter[1] == NULL) + *iter = &cpb; + } +#endif + acpi_cpufreq_boost_init(); + + ret = cpufreq_register_driver(&acpi_cpufreq_driver); + if (ret) { + free_acpi_perf_data(); + acpi_cpufreq_boost_exit(); + } + return ret; +} + +static void __exit acpi_cpufreq_exit(void) +{ + pr_debug("acpi_cpufreq_exit\n"); + + acpi_cpufreq_boost_exit(); + + cpufreq_unregister_driver(&acpi_cpufreq_driver); + + free_acpi_perf_data(); +} + +module_param(acpi_pstate_strict, uint, 0644); +MODULE_PARM_DESC(acpi_pstate_strict, + "value 0 or non-zero. non-zero -> strict ACPI checks are " + "performed during frequency changes."); + +late_initcall(acpi_cpufreq_init); +module_exit(acpi_cpufreq_exit); + +static const struct x86_cpu_id acpi_cpufreq_ids[] = { + X86_FEATURE_MATCH(X86_FEATURE_ACPI), + X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids); + +static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, }, + {ACPI_PROCESSOR_DEVICE_HID, }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, processor_device_ids); + +MODULE_ALIAS("acpi"); diff --git a/kernel/drivers/cpufreq/amd_freq_sensitivity.c b/kernel/drivers/cpufreq/amd_freq_sensitivity.c new file mode 100644 index 000000000..f6b79ab00 --- /dev/null +++ b/kernel/drivers/cpufreq/amd_freq_sensitivity.c @@ -0,0 +1,148 @@ +/* + * amd_freq_sensitivity.c: AMD frequency sensitivity feedback powersave bias + * for the ondemand governor. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * + * Author: Jacob Shin <jacob.shin@amd.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/percpu-defs.h> +#include <linux/init.h> +#include <linux/mod_devicetable.h> + +#include <asm/msr.h> +#include <asm/cpufeature.h> + +#include "cpufreq_governor.h" + +#define MSR_AMD64_FREQ_SENSITIVITY_ACTUAL 0xc0010080 +#define MSR_AMD64_FREQ_SENSITIVITY_REFERENCE 0xc0010081 +#define CLASS_CODE_SHIFT 56 +#define POWERSAVE_BIAS_MAX 1000 +#define POWERSAVE_BIAS_DEF 400 + +struct cpu_data_t { + u64 actual; + u64 reference; + unsigned int freq_prev; +}; + +static DEFINE_PER_CPU(struct cpu_data_t, cpu_data); + +static unsigned int amd_powersave_bias_target(struct cpufreq_policy *policy, + unsigned int freq_next, + unsigned int relation) +{ + int sensitivity; + long d_actual, d_reference; + struct msr actual, reference; + struct cpu_data_t *data = &per_cpu(cpu_data, policy->cpu); + struct dbs_data *od_data = policy->governor_data; + struct od_dbs_tuners *od_tuners = od_data->tuners; + struct od_cpu_dbs_info_s *od_info = + od_data->cdata->get_cpu_dbs_info_s(policy->cpu); + + if (!od_info->freq_table) + return freq_next; + + rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_ACTUAL, + &actual.l, &actual.h); + rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_REFERENCE, + &reference.l, &reference.h); + actual.h &= 0x00ffffff; + reference.h &= 0x00ffffff; + + /* counter wrapped around, so stay on current frequency */ + if (actual.q < data->actual || reference.q < data->reference) { + freq_next = policy->cur; + goto out; + } + + d_actual = actual.q - data->actual; + d_reference = reference.q - data->reference; + + /* divide by 0, so stay on current frequency as well */ + if (d_reference == 0) { + freq_next = policy->cur; + goto out; + } + + sensitivity = POWERSAVE_BIAS_MAX - + (POWERSAVE_BIAS_MAX * (d_reference - d_actual) / d_reference); + + clamp(sensitivity, 0, POWERSAVE_BIAS_MAX); + + /* this workload is not CPU bound, so choose a lower freq */ + if (sensitivity < od_tuners->powersave_bias) { + if (data->freq_prev == policy->cur) + freq_next = policy->cur; + + if (freq_next > policy->cur) + freq_next = policy->cur; + else if (freq_next < policy->cur) + freq_next = policy->min; + else { + unsigned int index; + + cpufreq_frequency_table_target(policy, + od_info->freq_table, policy->cur - 1, + CPUFREQ_RELATION_H, &index); + freq_next = od_info->freq_table[index].frequency; + } + + data->freq_prev = freq_next; + } else + data->freq_prev = 0; + +out: + data->actual = actual.q; + data->reference = reference.q; + return freq_next; +} + +static int __init amd_freq_sensitivity_init(void) +{ + u64 val; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return -ENODEV; + + if (!static_cpu_has(X86_FEATURE_PROC_FEEDBACK)) + return -ENODEV; + + if (rdmsrl_safe(MSR_AMD64_FREQ_SENSITIVITY_ACTUAL, &val)) + return -ENODEV; + + if (!(val >> CLASS_CODE_SHIFT)) + return -ENODEV; + + od_register_powersave_bias_handler(amd_powersave_bias_target, + POWERSAVE_BIAS_DEF); + return 0; +} +late_initcall(amd_freq_sensitivity_init); + +static void __exit amd_freq_sensitivity_exit(void) +{ + od_unregister_powersave_bias_handler(); +} +module_exit(amd_freq_sensitivity_exit); + +static const struct x86_cpu_id amd_freq_sensitivity_ids[] = { + X86_FEATURE_MATCH(X86_FEATURE_PROC_FEEDBACK), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, amd_freq_sensitivity_ids); + +MODULE_AUTHOR("Jacob Shin <jacob.shin@amd.com>"); +MODULE_DESCRIPTION("AMD frequency sensitivity feedback powersave bias for " + "the ondemand governor."); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/arm_big_little.c b/kernel/drivers/cpufreq/arm_big_little.c new file mode 100644 index 000000000..e1a6ba66a --- /dev/null +++ b/kernel/drivers/cpufreq/arm_big_little.c @@ -0,0 +1,605 @@ +/* + * ARM big.LITTLE Platforms CPUFreq support + * + * Copyright (C) 2013 ARM Ltd. + * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> + * + * Copyright (C) 2013 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_platform.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/topology.h> +#include <linux/types.h> +#include <asm/bL_switcher.h> + +#include "arm_big_little.h" + +/* Currently we support only two clusters */ +#define A15_CLUSTER 0 +#define A7_CLUSTER 1 +#define MAX_CLUSTERS 2 + +#ifdef CONFIG_BL_SWITCHER +static bool bL_switching_enabled; +#define is_bL_switching_enabled() bL_switching_enabled +#define set_switching_enabled(x) (bL_switching_enabled = (x)) +#else +#define is_bL_switching_enabled() false +#define set_switching_enabled(x) do { } while (0) +#endif + +#define ACTUAL_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq << 1 : freq) +#define VIRT_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq >> 1 : freq) + +static struct cpufreq_arm_bL_ops *arm_bL_ops; +static struct clk *clk[MAX_CLUSTERS]; +static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1]; +static atomic_t cluster_usage[MAX_CLUSTERS + 1]; + +static unsigned int clk_big_min; /* (Big) clock frequencies */ +static unsigned int clk_little_max; /* Maximum clock frequency (Little) */ + +static DEFINE_PER_CPU(unsigned int, physical_cluster); +static DEFINE_PER_CPU(unsigned int, cpu_last_req_freq); + +static struct mutex cluster_lock[MAX_CLUSTERS]; + +static inline int raw_cpu_to_cluster(int cpu) +{ + return topology_physical_package_id(cpu); +} + +static inline int cpu_to_cluster(int cpu) +{ + return is_bL_switching_enabled() ? + MAX_CLUSTERS : raw_cpu_to_cluster(cpu); +} + +static unsigned int find_cluster_maxfreq(int cluster) +{ + int j; + u32 max_freq = 0, cpu_freq; + + for_each_online_cpu(j) { + cpu_freq = per_cpu(cpu_last_req_freq, j); + + if ((cluster == per_cpu(physical_cluster, j)) && + (max_freq < cpu_freq)) + max_freq = cpu_freq; + } + + pr_debug("%s: cluster: %d, max freq: %d\n", __func__, cluster, + max_freq); + + return max_freq; +} + +static unsigned int clk_get_cpu_rate(unsigned int cpu) +{ + u32 cur_cluster = per_cpu(physical_cluster, cpu); + u32 rate = clk_get_rate(clk[cur_cluster]) / 1000; + + /* For switcher we use virtual A7 clock rates */ + if (is_bL_switching_enabled()) + rate = VIRT_FREQ(cur_cluster, rate); + + pr_debug("%s: cpu: %d, cluster: %d, freq: %u\n", __func__, cpu, + cur_cluster, rate); + + return rate; +} + +static unsigned int bL_cpufreq_get_rate(unsigned int cpu) +{ + if (is_bL_switching_enabled()) { + pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq, + cpu)); + + return per_cpu(cpu_last_req_freq, cpu); + } else { + return clk_get_cpu_rate(cpu); + } +} + +static unsigned int +bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) +{ + u32 new_rate, prev_rate; + int ret; + bool bLs = is_bL_switching_enabled(); + + mutex_lock(&cluster_lock[new_cluster]); + + if (bLs) { + prev_rate = per_cpu(cpu_last_req_freq, cpu); + per_cpu(cpu_last_req_freq, cpu) = rate; + per_cpu(physical_cluster, cpu) = new_cluster; + + new_rate = find_cluster_maxfreq(new_cluster); + new_rate = ACTUAL_FREQ(new_cluster, new_rate); + } else { + new_rate = rate; + } + + pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n", + __func__, cpu, old_cluster, new_cluster, new_rate); + + ret = clk_set_rate(clk[new_cluster], new_rate * 1000); + if (WARN_ON(ret)) { + pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret, + new_cluster); + if (bLs) { + per_cpu(cpu_last_req_freq, cpu) = prev_rate; + per_cpu(physical_cluster, cpu) = old_cluster; + } + + mutex_unlock(&cluster_lock[new_cluster]); + + return ret; + } + + mutex_unlock(&cluster_lock[new_cluster]); + + /* Recalc freq for old cluster when switching clusters */ + if (old_cluster != new_cluster) { + pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n", + __func__, cpu, old_cluster, new_cluster); + + /* Switch cluster */ + bL_switch_request(cpu, new_cluster); + + mutex_lock(&cluster_lock[old_cluster]); + + /* Set freq of old cluster if there are cpus left on it */ + new_rate = find_cluster_maxfreq(old_cluster); + new_rate = ACTUAL_FREQ(old_cluster, new_rate); + + if (new_rate) { + pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n", + __func__, old_cluster, new_rate); + + if (clk_set_rate(clk[old_cluster], new_rate * 1000)) + pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n", + __func__, ret, old_cluster); + } + mutex_unlock(&cluster_lock[old_cluster]); + } + + return 0; +} + +/* Set clock frequency */ +static int bL_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster; + unsigned int freqs_new; + + cur_cluster = cpu_to_cluster(cpu); + new_cluster = actual_cluster = per_cpu(physical_cluster, cpu); + + freqs_new = freq_table[cur_cluster][index].frequency; + + if (is_bL_switching_enabled()) { + if ((actual_cluster == A15_CLUSTER) && + (freqs_new < clk_big_min)) { + new_cluster = A7_CLUSTER; + } else if ((actual_cluster == A7_CLUSTER) && + (freqs_new > clk_little_max)) { + new_cluster = A15_CLUSTER; + } + } + + return bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new); +} + +static inline u32 get_table_count(struct cpufreq_frequency_table *table) +{ + int count; + + for (count = 0; table[count].frequency != CPUFREQ_TABLE_END; count++) + ; + + return count; +} + +/* get the minimum frequency in the cpufreq_frequency_table */ +static inline u32 get_table_min(struct cpufreq_frequency_table *table) +{ + struct cpufreq_frequency_table *pos; + uint32_t min_freq = ~0; + cpufreq_for_each_entry(pos, table) + if (pos->frequency < min_freq) + min_freq = pos->frequency; + return min_freq; +} + +/* get the maximum frequency in the cpufreq_frequency_table */ +static inline u32 get_table_max(struct cpufreq_frequency_table *table) +{ + struct cpufreq_frequency_table *pos; + uint32_t max_freq = 0; + cpufreq_for_each_entry(pos, table) + if (pos->frequency > max_freq) + max_freq = pos->frequency; + return max_freq; +} + +static int merge_cluster_tables(void) +{ + int i, j, k = 0, count = 1; + struct cpufreq_frequency_table *table; + + for (i = 0; i < MAX_CLUSTERS; i++) + count += get_table_count(freq_table[i]); + + table = kzalloc(sizeof(*table) * count, GFP_KERNEL); + if (!table) + return -ENOMEM; + + freq_table[MAX_CLUSTERS] = table; + + /* Add in reverse order to get freqs in increasing order */ + for (i = MAX_CLUSTERS - 1; i >= 0; i--) { + for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END; + j++) { + table[k].frequency = VIRT_FREQ(i, + freq_table[i][j].frequency); + pr_debug("%s: index: %d, freq: %d\n", __func__, k, + table[k].frequency); + k++; + } + } + + table[k].driver_data = k; + table[k].frequency = CPUFREQ_TABLE_END; + + pr_debug("%s: End, table: %p, count: %d\n", __func__, table, k); + + return 0; +} + +static void _put_cluster_clk_and_freq_table(struct device *cpu_dev) +{ + u32 cluster = raw_cpu_to_cluster(cpu_dev->id); + + if (!freq_table[cluster]) + return; + + clk_put(clk[cluster]); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); + if (arm_bL_ops->free_opp_table) + arm_bL_ops->free_opp_table(cpu_dev); + dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster); +} + +static void put_cluster_clk_and_freq_table(struct device *cpu_dev) +{ + u32 cluster = cpu_to_cluster(cpu_dev->id); + int i; + + if (atomic_dec_return(&cluster_usage[cluster])) + return; + + if (cluster < MAX_CLUSTERS) + return _put_cluster_clk_and_freq_table(cpu_dev); + + for_each_present_cpu(i) { + struct device *cdev = get_cpu_device(i); + if (!cdev) { + pr_err("%s: failed to get cpu%d device\n", __func__, i); + return; + } + + _put_cluster_clk_and_freq_table(cdev); + } + + /* free virtual table */ + kfree(freq_table[cluster]); +} + +static int _get_cluster_clk_and_freq_table(struct device *cpu_dev) +{ + u32 cluster = raw_cpu_to_cluster(cpu_dev->id); + char name[14] = "cpu-cluster."; + int ret; + + if (freq_table[cluster]) + return 0; + + ret = arm_bL_ops->init_opp_table(cpu_dev); + if (ret) { + dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n", + __func__, cpu_dev->id, ret); + goto out; + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]); + if (ret) { + dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n", + __func__, cpu_dev->id, ret); + goto free_opp_table; + } + + name[12] = cluster + '0'; + clk[cluster] = clk_get(cpu_dev, name); + if (!IS_ERR(clk[cluster])) { + dev_dbg(cpu_dev, "%s: clk: %p & freq table: %p, cluster: %d\n", + __func__, clk[cluster], freq_table[cluster], + cluster); + return 0; + } + + dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n", + __func__, cpu_dev->id, cluster); + ret = PTR_ERR(clk[cluster]); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); + +free_opp_table: + if (arm_bL_ops->free_opp_table) + arm_bL_ops->free_opp_table(cpu_dev); +out: + dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__, + cluster); + return ret; +} + +static int get_cluster_clk_and_freq_table(struct device *cpu_dev) +{ + u32 cluster = cpu_to_cluster(cpu_dev->id); + int i, ret; + + if (atomic_inc_return(&cluster_usage[cluster]) != 1) + return 0; + + if (cluster < MAX_CLUSTERS) { + ret = _get_cluster_clk_and_freq_table(cpu_dev); + if (ret) + atomic_dec(&cluster_usage[cluster]); + return ret; + } + + /* + * Get data for all clusters and fill virtual cluster with a merge of + * both + */ + for_each_present_cpu(i) { + struct device *cdev = get_cpu_device(i); + if (!cdev) { + pr_err("%s: failed to get cpu%d device\n", __func__, i); + return -ENODEV; + } + + ret = _get_cluster_clk_and_freq_table(cdev); + if (ret) + goto put_clusters; + } + + ret = merge_cluster_tables(); + if (ret) + goto put_clusters; + + /* Assuming 2 cluster, set clk_big_min and clk_little_max */ + clk_big_min = get_table_min(freq_table[0]); + clk_little_max = VIRT_FREQ(1, get_table_max(freq_table[1])); + + pr_debug("%s: cluster: %d, clk_big_min: %d, clk_little_max: %d\n", + __func__, cluster, clk_big_min, clk_little_max); + + return 0; + +put_clusters: + for_each_present_cpu(i) { + struct device *cdev = get_cpu_device(i); + if (!cdev) { + pr_err("%s: failed to get cpu%d device\n", __func__, i); + return -ENODEV; + } + + _put_cluster_clk_and_freq_table(cdev); + } + + atomic_dec(&cluster_usage[cluster]); + + return ret; +} + +/* Per-CPU initialization */ +static int bL_cpufreq_init(struct cpufreq_policy *policy) +{ + u32 cur_cluster = cpu_to_cluster(policy->cpu); + struct device *cpu_dev; + int ret; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + policy->cpu); + return -ENODEV; + } + + ret = get_cluster_clk_and_freq_table(cpu_dev); + if (ret) + return ret; + + ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]); + if (ret) { + dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n", + policy->cpu, cur_cluster); + put_cluster_clk_and_freq_table(cpu_dev); + return ret; + } + + if (cur_cluster < MAX_CLUSTERS) { + int cpu; + + cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu)); + + for_each_cpu(cpu, policy->cpus) + per_cpu(physical_cluster, cpu) = cur_cluster; + } else { + /* Assumption: during init, we are always running on A15 */ + per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER; + } + + if (arm_bL_ops->get_transition_latency) + policy->cpuinfo.transition_latency = + arm_bL_ops->get_transition_latency(cpu_dev); + else + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + + if (is_bL_switching_enabled()) + per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu); + + dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu); + return 0; +} + +static int bL_cpufreq_exit(struct cpufreq_policy *policy) +{ + struct device *cpu_dev; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + policy->cpu); + return -ENODEV; + } + + put_cluster_clk_and_freq_table(cpu_dev); + dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu); + + return 0; +} + +static struct cpufreq_driver bL_cpufreq_driver = { + .name = "arm-big-little", + .flags = CPUFREQ_STICKY | + CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = bL_cpufreq_set_target, + .get = bL_cpufreq_get_rate, + .init = bL_cpufreq_init, + .exit = bL_cpufreq_exit, + .attr = cpufreq_generic_attr, +}; + +static int bL_cpufreq_switcher_notifier(struct notifier_block *nfb, + unsigned long action, void *_arg) +{ + pr_debug("%s: action: %ld\n", __func__, action); + + switch (action) { + case BL_NOTIFY_PRE_ENABLE: + case BL_NOTIFY_PRE_DISABLE: + cpufreq_unregister_driver(&bL_cpufreq_driver); + break; + + case BL_NOTIFY_POST_ENABLE: + set_switching_enabled(true); + cpufreq_register_driver(&bL_cpufreq_driver); + break; + + case BL_NOTIFY_POST_DISABLE: + set_switching_enabled(false); + cpufreq_register_driver(&bL_cpufreq_driver); + break; + + default: + return NOTIFY_DONE; + } + + return NOTIFY_OK; +} + +static struct notifier_block bL_switcher_notifier = { + .notifier_call = bL_cpufreq_switcher_notifier, +}; + +int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops) +{ + int ret, i; + + if (arm_bL_ops) { + pr_debug("%s: Already registered: %s, exiting\n", __func__, + arm_bL_ops->name); + return -EBUSY; + } + + if (!ops || !strlen(ops->name) || !ops->init_opp_table) { + pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__); + return -ENODEV; + } + + arm_bL_ops = ops; + + ret = bL_switcher_get_enabled(); + set_switching_enabled(ret); + + for (i = 0; i < MAX_CLUSTERS; i++) + mutex_init(&cluster_lock[i]); + + ret = cpufreq_register_driver(&bL_cpufreq_driver); + if (ret) { + pr_info("%s: Failed registering platform driver: %s, err: %d\n", + __func__, ops->name, ret); + arm_bL_ops = NULL; + } else { + ret = bL_switcher_register_notifier(&bL_switcher_notifier); + if (ret) { + cpufreq_unregister_driver(&bL_cpufreq_driver); + arm_bL_ops = NULL; + } else { + pr_info("%s: Registered platform driver: %s\n", + __func__, ops->name); + } + } + + bL_switcher_put_enabled(); + return ret; +} +EXPORT_SYMBOL_GPL(bL_cpufreq_register); + +void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops) +{ + if (arm_bL_ops != ops) { + pr_err("%s: Registered with: %s, can't unregister, exiting\n", + __func__, arm_bL_ops->name); + return; + } + + bL_switcher_get_enabled(); + bL_switcher_unregister_notifier(&bL_switcher_notifier); + cpufreq_unregister_driver(&bL_cpufreq_driver); + bL_switcher_put_enabled(); + pr_info("%s: Un-registered platform driver: %s\n", __func__, + arm_bL_ops->name); + arm_bL_ops = NULL; +} +EXPORT_SYMBOL_GPL(bL_cpufreq_unregister); + +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); +MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/cpufreq/arm_big_little.h b/kernel/drivers/cpufreq/arm_big_little.h new file mode 100644 index 000000000..a211f7db9 --- /dev/null +++ b/kernel/drivers/cpufreq/arm_big_little.h @@ -0,0 +1,43 @@ +/* + * ARM big.LITTLE platform's CPUFreq header file + * + * Copyright (C) 2013 ARM Ltd. + * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> + * + * Copyright (C) 2013 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef CPUFREQ_ARM_BIG_LITTLE_H +#define CPUFREQ_ARM_BIG_LITTLE_H + +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/types.h> + +struct cpufreq_arm_bL_ops { + char name[CPUFREQ_NAME_LEN]; + + /* + * This must set opp table for cpu_dev in a similar way as done by + * of_init_opp_table(). + */ + int (*init_opp_table)(struct device *cpu_dev); + + /* Optional */ + int (*get_transition_latency)(struct device *cpu_dev); + void (*free_opp_table)(struct device *cpu_dev); +}; + +int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops); +void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops); + +#endif /* CPUFREQ_ARM_BIG_LITTLE_H */ diff --git a/kernel/drivers/cpufreq/arm_big_little_dt.c b/kernel/drivers/cpufreq/arm_big_little_dt.c new file mode 100644 index 000000000..36d91dba2 --- /dev/null +++ b/kernel/drivers/cpufreq/arm_big_little_dt.c @@ -0,0 +1,117 @@ +/* + * Generic big.LITTLE CPUFreq Interface driver + * + * It provides necessary ops to arm_big_little cpufreq driver and gets + * Frequency information from Device Tree. Freq table in DT must be in KHz. + * + * Copyright (C) 2013 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> +#include "arm_big_little.h" + +/* get cpu node with valid operating-points */ +static struct device_node *get_cpu_node_with_valid_op(int cpu) +{ + struct device_node *np = of_cpu_device_node_get(cpu); + + if (!of_get_property(np, "operating-points", NULL)) { + of_node_put(np); + np = NULL; + } + + return np; +} + +static int dt_init_opp_table(struct device *cpu_dev) +{ + struct device_node *np; + int ret; + + np = of_node_get(cpu_dev->of_node); + if (!np) { + pr_err("failed to find cpu%d node\n", cpu_dev->id); + return -ENOENT; + } + + ret = of_init_opp_table(cpu_dev); + of_node_put(np); + + return ret; +} + +static int dt_get_transition_latency(struct device *cpu_dev) +{ + struct device_node *np; + u32 transition_latency = CPUFREQ_ETERNAL; + + np = of_node_get(cpu_dev->of_node); + if (!np) { + pr_info("Failed to find cpu node. Use CPUFREQ_ETERNAL transition latency\n"); + return CPUFREQ_ETERNAL; + } + + of_property_read_u32(np, "clock-latency", &transition_latency); + of_node_put(np); + + pr_debug("%s: clock-latency: %d\n", __func__, transition_latency); + return transition_latency; +} + +static struct cpufreq_arm_bL_ops dt_bL_ops = { + .name = "dt-bl", + .get_transition_latency = dt_get_transition_latency, + .init_opp_table = dt_init_opp_table, + .free_opp_table = of_free_opp_table, +}; + +static int generic_bL_probe(struct platform_device *pdev) +{ + struct device_node *np; + + np = get_cpu_node_with_valid_op(0); + if (!np) + return -ENODEV; + + of_node_put(np); + return bL_cpufreq_register(&dt_bL_ops); +} + +static int generic_bL_remove(struct platform_device *pdev) +{ + bL_cpufreq_unregister(&dt_bL_ops); + return 0; +} + +static struct platform_driver generic_bL_platdrv = { + .driver = { + .name = "arm-bL-cpufreq-dt", + }, + .probe = generic_bL_probe, + .remove = generic_bL_remove, +}; +module_platform_driver(generic_bL_platdrv); + +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); +MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver via DT"); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/cpufreq/at32ap-cpufreq.c b/kernel/drivers/cpufreq/at32ap-cpufreq.c new file mode 100644 index 000000000..7b612c8bb --- /dev/null +++ b/kernel/drivers/cpufreq/at32ap-cpufreq.c @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2004-2007 Atmel Corporation + * + * Based on MIPS implementation arch/mips/kernel/time.c + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/*#define DEBUG*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/slab.h> + +static struct cpufreq_frequency_table *freq_table; + +static unsigned int ref_freq; +static unsigned long loops_per_jiffy_ref; + +static int at32_set_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int old_freq, new_freq; + + old_freq = policy->cur; + new_freq = freq_table[index].frequency; + + if (!ref_freq) { + ref_freq = old_freq; + loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy; + } + + if (old_freq < new_freq) + boot_cpu_data.loops_per_jiffy = cpufreq_scale( + loops_per_jiffy_ref, ref_freq, new_freq); + clk_set_rate(policy->clk, new_freq * 1000); + if (new_freq < old_freq) + boot_cpu_data.loops_per_jiffy = cpufreq_scale( + loops_per_jiffy_ref, ref_freq, new_freq); + + return 0; +} + +static int at32_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + unsigned int frequency, rate, min_freq; + struct clk *cpuclk; + int retval, steps, i; + + if (policy->cpu != 0) + return -EINVAL; + + cpuclk = clk_get(NULL, "cpu"); + if (IS_ERR(cpuclk)) { + pr_debug("cpufreq: could not get CPU clk\n"); + retval = PTR_ERR(cpuclk); + goto out_err; + } + + min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000; + frequency = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; + policy->cpuinfo.transition_latency = 0; + + /* + * AVR32 CPU frequency rate scales in power of two between maximum and + * minimum, also add space for the table end marker. + * + * Further validate that the frequency is usable, and append it to the + * frequency table. + */ + steps = fls(frequency / min_freq) + 1; + freq_table = kzalloc(steps * sizeof(struct cpufreq_frequency_table), + GFP_KERNEL); + if (!freq_table) { + retval = -ENOMEM; + goto out_err_put_clk; + } + + for (i = 0; i < (steps - 1); i++) { + rate = clk_round_rate(cpuclk, frequency * 1000) / 1000; + + if (rate != frequency) + freq_table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + freq_table[i].frequency = frequency; + + frequency /= 2; + } + + policy->clk = cpuclk; + freq_table[steps - 1].frequency = CPUFREQ_TABLE_END; + + retval = cpufreq_table_validate_and_show(policy, freq_table); + if (!retval) { + printk("cpufreq: AT32AP CPU frequency driver\n"); + return 0; + } + + kfree(freq_table); +out_err_put_clk: + clk_put(cpuclk); +out_err: + return retval; +} + +static struct cpufreq_driver at32_driver = { + .name = "at32ap", + .init = at32_cpufreq_driver_init, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = at32_set_target, + .get = cpufreq_generic_get, + .flags = CPUFREQ_STICKY, +}; + +static int __init at32_cpufreq_init(void) +{ + return cpufreq_register_driver(&at32_driver); +} +late_initcall(at32_cpufreq_init); diff --git a/kernel/drivers/cpufreq/blackfin-cpufreq.c b/kernel/drivers/cpufreq/blackfin-cpufreq.c new file mode 100644 index 000000000..a9f8e5bd0 --- /dev/null +++ b/kernel/drivers/cpufreq/blackfin-cpufreq.c @@ -0,0 +1,217 @@ +/* + * Blackfin core clock scaling + * + * Copyright 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <asm/blackfin.h> +#include <asm/time.h> +#include <asm/dpmc.h> + + +/* this is the table of CCLK frequencies, in Hz */ +/* .driver_data is the entry in the auxiliary dpm_state_table[] */ +static struct cpufreq_frequency_table bfin_freq_table[] = { + { + .frequency = CPUFREQ_TABLE_END, + .driver_data = 0, + }, + { + .frequency = CPUFREQ_TABLE_END, + .driver_data = 1, + }, + { + .frequency = CPUFREQ_TABLE_END, + .driver_data = 2, + }, + { + .frequency = CPUFREQ_TABLE_END, + .driver_data = 0, + }, +}; + +static struct bfin_dpm_state { + unsigned int csel; /* system clock divider */ + unsigned int tscale; /* change the divider on the core timer interrupt */ +} dpm_state_table[3]; + +#if defined(CONFIG_CYCLES_CLOCKSOURCE) +/* + * normalized to maximum frequency offset for CYCLES, + * used in time-ts cycles clock source, but could be used + * somewhere also. + */ +unsigned long long __bfin_cycles_off; +unsigned int __bfin_cycles_mod; +#endif + +/**************************************************************************/ +static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) +{ + + unsigned long csel, min_cclk; + int index; + + /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ +#if ANOMALY_05000273 || ANOMALY_05000274 || \ + (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \ + && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) + min_cclk = sclk * 2; +#else + min_cclk = sclk; +#endif + +#ifndef CONFIG_BF60x + csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); +#else + csel = bfin_read32(CGU0_DIV) & 0x1F; +#endif + + for (index = 0; (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) { + bfin_freq_table[index].frequency = cclk >> index; +#ifndef CONFIG_BF60x + dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ +#else + dpm_state_table[index].csel = csel; +#endif + dpm_state_table[index].tscale = (TIME_SCALE >> index) - 1; + + pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", + bfin_freq_table[index].frequency, + dpm_state_table[index].csel, + dpm_state_table[index].tscale); + } + return; +} + +static void bfin_adjust_core_timer(void *info) +{ + unsigned int tscale; + unsigned int index = *(unsigned int *)info; + + /* we have to adjust the core timer, because it is using cclk */ + tscale = dpm_state_table[index].tscale; + bfin_write_TSCALE(tscale); + return; +} + +static unsigned int bfin_getfreq_khz(unsigned int cpu) +{ + /* Both CoreA/B have the same core clock */ + return get_cclk() / 1000; +} + +#ifdef CONFIG_BF60x +unsigned long cpu_set_cclk(int cpu, unsigned long new) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, "CCLK"); + if (IS_ERR(clk)) + return -ENODEV; + + ret = clk_set_rate(clk, new); + clk_put(clk); + return ret; +} +#endif + +static int bfin_target(struct cpufreq_policy *policy, unsigned int index) +{ +#ifndef CONFIG_BF60x + unsigned int plldiv; +#endif + static unsigned long lpj_ref; + static unsigned int lpj_ref_freq; + unsigned int old_freq, new_freq; + int ret = 0; + +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + cycles_t cycles; +#endif + + old_freq = bfin_getfreq_khz(0); + new_freq = bfin_freq_table[index].frequency; + +#ifndef CONFIG_BF60x + plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; + bfin_write_PLL_DIV(plldiv); +#else + ret = cpu_set_cclk(policy->cpu, new_freq * 1000); + if (ret != 0) { + WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret); + return ret; + } +#endif + on_each_cpu(bfin_adjust_core_timer, &index, 1); +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + cycles = get_cycles(); + SSYNC(); + cycles += 10; /* ~10 cycles we lose after get_cycles() */ + __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index); + __bfin_cycles_mod = index; +#endif + if (!lpj_ref_freq) { + lpj_ref = loops_per_jiffy; + lpj_ref_freq = old_freq; + } + if (new_freq != old_freq) { + loops_per_jiffy = cpufreq_scale(lpj_ref, + lpj_ref_freq, new_freq); + } + + return ret; +} + +static int __bfin_cpu_init(struct cpufreq_policy *policy) +{ + + unsigned long cclk, sclk; + + cclk = get_cclk() / 1000; + sclk = get_sclk() / 1000; + + if (policy->cpu == CPUFREQ_CPU) + bfin_init_tables(cclk, sclk); + + policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ + + return cpufreq_table_validate_and_show(policy, bfin_freq_table); +} + +static struct cpufreq_driver bfin_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = bfin_target, + .get = bfin_getfreq_khz, + .init = __bfin_cpu_init, + .name = "bfin cpufreq", + .attr = cpufreq_generic_attr, +}; + +static int __init bfin_cpu_init(void) +{ + return cpufreq_register_driver(&bfin_driver); +} + +static void __exit bfin_cpu_exit(void) +{ + cpufreq_unregister_driver(&bfin_driver); +} + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("cpufreq driver for Blackfin"); +MODULE_LICENSE("GPL"); + +module_init(bfin_cpu_init); +module_exit(bfin_cpu_exit); diff --git a/kernel/drivers/cpufreq/cpufreq-dt.c b/kernel/drivers/cpufreq/cpufreq-dt.c new file mode 100644 index 000000000..bab67db54 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq-dt.c @@ -0,0 +1,422 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Copyright (C) 2014 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + * + * The OPP code in function set_target() is reused from + * drivers/cpufreq/omap-cpufreq.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpu_cooling.h> +#include <linux/cpufreq.h> +#include <linux/cpufreq-dt.h> +#include <linux/cpumask.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +struct private_data { + struct device *cpu_dev; + struct regulator *cpu_reg; + struct thermal_cooling_device *cdev; + unsigned int voltage_tolerance; /* in percentage */ +}; + +static int set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct dev_pm_opp *opp; + struct cpufreq_frequency_table *freq_table = policy->freq_table; + struct clk *cpu_clk = policy->clk; + struct private_data *priv = policy->driver_data; + struct device *cpu_dev = priv->cpu_dev; + struct regulator *cpu_reg = priv->cpu_reg; + unsigned long volt = 0, volt_old = 0, tol = 0; + unsigned int old_freq, new_freq; + long freq_Hz, freq_exact; + int ret; + + freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); + if (freq_Hz <= 0) + freq_Hz = freq_table[index].frequency * 1000; + + freq_exact = freq_Hz; + new_freq = freq_Hz / 1000; + old_freq = clk_get_rate(cpu_clk) / 1000; + + if (!IS_ERR(cpu_reg)) { + unsigned long opp_freq; + + rcu_read_lock(); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(cpu_dev, "failed to find OPP for %ld\n", + freq_Hz); + return PTR_ERR(opp); + } + volt = dev_pm_opp_get_voltage(opp); + opp_freq = dev_pm_opp_get_freq(opp); + rcu_read_unlock(); + tol = volt * priv->voltage_tolerance / 100; + volt_old = regulator_get_voltage(cpu_reg); + dev_dbg(cpu_dev, "Found OPP: %ld kHz, %ld uV\n", + opp_freq / 1000, volt); + } + + dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", + old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1, + new_freq / 1000, volt ? volt / 1000 : -1); + + /* scaling up? scale voltage before frequency */ + if (!IS_ERR(cpu_reg) && new_freq > old_freq) { + ret = regulator_set_voltage_tol(cpu_reg, volt, tol); + if (ret) { + dev_err(cpu_dev, "failed to scale voltage up: %d\n", + ret); + return ret; + } + } + + ret = clk_set_rate(cpu_clk, freq_exact); + if (ret) { + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); + if (!IS_ERR(cpu_reg) && volt_old > 0) + regulator_set_voltage_tol(cpu_reg, volt_old, tol); + return ret; + } + + /* scaling down? scale voltage after frequency */ + if (!IS_ERR(cpu_reg) && new_freq < old_freq) { + ret = regulator_set_voltage_tol(cpu_reg, volt, tol); + if (ret) { + dev_err(cpu_dev, "failed to scale voltage down: %d\n", + ret); + clk_set_rate(cpu_clk, old_freq * 1000); + } + } + + return ret; +} + +static int allocate_resources(int cpu, struct device **cdev, + struct regulator **creg, struct clk **cclk) +{ + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + int ret = 0; + char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("failed to get cpu%d device\n", cpu); + return -ENODEV; + } + + /* Try "cpu0" for older DTs */ + if (!cpu) + reg = reg_cpu0; + else + reg = reg_cpu; + +try_again: + cpu_reg = regulator_get_optional(cpu_dev, reg); + if (IS_ERR(cpu_reg)) { + /* + * If cpu's regulator supply node is present, but regulator is + * not yet registered, we should try defering probe. + */ + if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { + dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n", + cpu); + return -EPROBE_DEFER; + } + + /* Try with "cpu-supply" */ + if (reg == reg_cpu0) { + reg = reg_cpu; + goto try_again; + } + + dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n", + cpu, PTR_ERR(cpu_reg)); + } + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + /* put regulator */ + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + ret = PTR_ERR(cpu_clk); + + /* + * If cpu's clk node is present, but clock is not yet + * registered, we should try defering probe. + */ + if (ret == -EPROBE_DEFER) + dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu); + else + dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu, + ret); + } else { + *cdev = cpu_dev; + *creg = cpu_reg; + *cclk = cpu_clk; + } + + return ret; +} + +static int cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_dt_platform_data *pd; + struct cpufreq_frequency_table *freq_table; + struct device_node *np; + struct private_data *priv; + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + unsigned long min_uV = ~0, max_uV = 0; + unsigned int transition_latency; + int ret; + + ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk); + if (ret) { + pr_err("%s: Failed to allocate resources: %d\n", __func__, ret); + return ret; + } + + np = of_node_get(cpu_dev->of_node); + if (!np) { + dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu); + ret = -ENOENT; + goto out_put_reg_clk; + } + + /* OPPs might be populated at runtime, don't check for error here */ + of_init_opp_table(cpu_dev); + + /* + * But we need OPP table to function so if it is not there let's + * give platform code chance to provide it for us. + */ + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + pr_debug("OPP table is not ready, deferring probe\n"); + ret = -EPROBE_DEFER; + goto out_free_opp; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto out_free_opp; + } + + of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance); + + if (of_property_read_u32(np, "clock-latency", &transition_latency)) + transition_latency = CPUFREQ_ETERNAL; + + if (!IS_ERR(cpu_reg)) { + unsigned long opp_freq = 0; + + /* + * Disable any OPPs where the connected regulator isn't able to + * provide the specified voltage and record minimum and maximum + * voltage levels. + */ + while (1) { + struct dev_pm_opp *opp; + unsigned long opp_uV, tol_uV; + + rcu_read_lock(); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + break; + } + opp_uV = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + + tol_uV = opp_uV * priv->voltage_tolerance / 100; + if (regulator_is_supported_voltage(cpu_reg, opp_uV, + opp_uV + tol_uV)) { + if (opp_uV < min_uV) + min_uV = opp_uV; + if (opp_uV > max_uV) + max_uV = opp_uV; + } else { + dev_pm_opp_disable(cpu_dev, opp_freq); + } + + opp_freq++; + } + + ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); + if (ret > 0) + transition_latency += ret * 1000; + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + pr_err("failed to init cpufreq table: %d\n", ret); + goto out_free_priv; + } + + priv->cpu_dev = cpu_dev; + priv->cpu_reg = cpu_reg; + policy->driver_data = priv; + + policy->clk = cpu_clk; + ret = cpufreq_table_validate_and_show(policy, freq_table); + if (ret) { + dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__, + ret); + goto out_free_cpufreq_table; + } + + policy->cpuinfo.transition_latency = transition_latency; + + pd = cpufreq_get_driver_data(); + if (!pd || !pd->independent_clocks) + cpumask_setall(policy->cpus); + + of_node_put(np); + + return 0; + +out_free_cpufreq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); +out_free_priv: + kfree(priv); +out_free_opp: + of_free_opp_table(cpu_dev); + of_node_put(np); +out_put_reg_clk: + clk_put(cpu_clk); + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + return ret; +} + +static int cpufreq_exit(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + + cpufreq_cooling_unregister(priv->cdev); + dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); + of_free_opp_table(priv->cpu_dev); + clk_put(policy->clk); + if (!IS_ERR(priv->cpu_reg)) + regulator_put(priv->cpu_reg); + kfree(priv); + + return 0; +} + +static void cpufreq_ready(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + struct device_node *np = of_node_get(priv->cpu_dev->of_node); + + if (WARN_ON(!np)) + return; + + /* + * For now, just loading the cooling device; + * thermal DT code takes care of matching them. + */ + if (of_find_property(np, "#cooling-cells", NULL)) { + priv->cdev = of_cpufreq_cooling_register(np, + policy->related_cpus); + if (IS_ERR(priv->cdev)) { + dev_err(priv->cpu_dev, + "running cpufreq without cooling device: %ld\n", + PTR_ERR(priv->cdev)); + + priv->cdev = NULL; + } + } + + of_node_put(np); +} + +static struct cpufreq_driver dt_cpufreq_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = set_target, + .get = cpufreq_generic_get, + .init = cpufreq_init, + .exit = cpufreq_exit, + .ready = cpufreq_ready, + .name = "cpufreq-dt", + .attr = cpufreq_generic_attr, +}; + +static int dt_cpufreq_probe(struct platform_device *pdev) +{ + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + int ret; + + /* + * All per-cluster (CPUs sharing clock/voltages) initialization is done + * from ->init(). In probe(), we just need to make sure that clk and + * regulators are available. Else defer probe and retry. + * + * FIXME: Is checking this only for CPU0 sufficient ? + */ + ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk); + if (ret) + return ret; + + clk_put(cpu_clk); + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev); + + ret = cpufreq_register_driver(&dt_cpufreq_driver); + if (ret) + dev_err(cpu_dev, "failed register driver: %d\n", ret); + + return ret; +} + +static int dt_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&dt_cpufreq_driver); + return 0; +} + +static struct platform_driver dt_cpufreq_platdrv = { + .driver = { + .name = "cpufreq-dt", + }, + .probe = dt_cpufreq_probe, + .remove = dt_cpufreq_remove, +}; +module_platform_driver(dt_cpufreq_platdrv); + +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Generic cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/cpufreq-nforce2.c b/kernel/drivers/cpufreq/cpufreq-nforce2.c new file mode 100644 index 000000000..a2258090b --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq-nforce2.c @@ -0,0 +1,445 @@ +/* + * (C) 2004-2006 Sebastian Witt <se.witt@gmx.net> + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon reverse engineered information + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/delay.h> + +#define NFORCE2_XTAL 25 +#define NFORCE2_BOOTFSB 0x48 +#define NFORCE2_PLLENABLE 0xa8 +#define NFORCE2_PLLREG 0xa4 +#define NFORCE2_PLLADR 0xa0 +#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div) + +#define NFORCE2_MIN_FSB 50 +#define NFORCE2_SAFE_DISTANCE 50 + +/* Delay in ms between FSB changes */ +/* #define NFORCE2_DELAY 10 */ + +/* + * nforce2_chipset: + * FSB is changed using the chipset + */ +static struct pci_dev *nforce2_dev; + +/* fid: + * multiplier * 10 + */ +static int fid; + +/* min_fsb, max_fsb: + * minimum and maximum FSB (= FSB at boot time) + */ +static int min_fsb; +static int max_fsb; + +MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); +MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); +MODULE_LICENSE("GPL"); + +module_param(fid, int, 0444); +module_param(min_fsb, int, 0444); + +MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); +MODULE_PARM_DESC(min_fsb, + "Minimum FSB to use, if not defined: current FSB - 50"); + +#define PFX "cpufreq-nforce2: " + +/** + * nforce2_calc_fsb - calculate FSB + * @pll: PLL value + * + * Calculates FSB from PLL value + */ +static int nforce2_calc_fsb(int pll) +{ + unsigned char mul, div; + + mul = (pll >> 8) & 0xff; + div = pll & 0xff; + + if (div > 0) + return NFORCE2_XTAL * mul / div; + + return 0; +} + +/** + * nforce2_calc_pll - calculate PLL value + * @fsb: FSB + * + * Calculate PLL value for given FSB + */ +static int nforce2_calc_pll(unsigned int fsb) +{ + unsigned char xmul, xdiv; + unsigned char mul = 0, div = 0; + int tried = 0; + + /* Try to calculate multiplier and divider up to 4 times */ + while (((mul == 0) || (div == 0)) && (tried <= 3)) { + for (xdiv = 2; xdiv <= 0x80; xdiv++) + for (xmul = 1; xmul <= 0xfe; xmul++) + if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) == + fsb + tried) { + mul = xmul; + div = xdiv; + } + tried++; + } + + if ((mul == 0) || (div == 0)) + return -1; + + return NFORCE2_PLL(mul, div); +} + +/** + * nforce2_write_pll - write PLL value to chipset + * @pll: PLL value + * + * Writes new FSB PLL value to chipset + */ +static void nforce2_write_pll(int pll) +{ + int temp; + + /* Set the pll addr. to 0x00 */ + pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0); + + /* Now write the value in all 64 registers */ + for (temp = 0; temp <= 0x3f; temp++) + pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); + + return; +} + +/** + * nforce2_fsb_read - Read FSB + * + * Read FSB from chipset + * If bootfsb != 0, return FSB at boot-time + */ +static unsigned int nforce2_fsb_read(int bootfsb) +{ + struct pci_dev *nforce2_sub5; + u32 fsb, temp = 0; + + /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ + nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF, + PCI_ANY_ID, PCI_ANY_ID, NULL); + if (!nforce2_sub5) + return 0; + + pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); + fsb /= 1000000; + + /* Check if PLL register is already set */ + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + + if (bootfsb || !temp) + return fsb; + + /* Use PLL register FSB value */ + pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp); + fsb = nforce2_calc_fsb(temp); + + return fsb; +} + +/** + * nforce2_set_fsb - set new FSB + * @fsb: New FSB + * + * Sets new FSB + */ +static int nforce2_set_fsb(unsigned int fsb) +{ + u32 temp = 0; + unsigned int tfsb; + int diff; + int pll = 0; + + if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { + printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); + return -EINVAL; + } + + tfsb = nforce2_fsb_read(0); + if (!tfsb) { + printk(KERN_ERR PFX "Error while reading the FSB\n"); + return -EINVAL; + } + + /* First write? Then set actual value */ + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + if (!temp) { + pll = nforce2_calc_pll(tfsb); + + if (pll < 0) + return -EINVAL; + + nforce2_write_pll(pll); + } + + /* Enable write access */ + temp = 0x01; + pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp); + + diff = tfsb - fsb; + + if (!diff) + return 0; + + while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) { + if (diff < 0) + tfsb++; + else + tfsb--; + + /* Calculate the PLL reg. value */ + pll = nforce2_calc_pll(tfsb); + if (pll == -1) + return -EINVAL; + + nforce2_write_pll(pll); +#ifdef NFORCE2_DELAY + mdelay(NFORCE2_DELAY); +#endif + } + + temp = 0x40; + pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp); + + return 0; +} + +/** + * nforce2_get - get the CPU frequency + * @cpu: CPU number + * + * Returns the CPU frequency + */ +static unsigned int nforce2_get(unsigned int cpu) +{ + if (cpu) + return 0; + return nforce2_fsb_read(0) * fid * 100; +} + +/** + * nforce2_target - set a new CPUFreq policy + * @policy: new policy + * @target_freq: the target frequency + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * + * Sets a new CPUFreq policy. + */ +static int nforce2_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ +/* unsigned long flags; */ + struct cpufreq_freqs freqs; + unsigned int target_fsb; + + if ((target_freq > policy->max) || (target_freq < policy->min)) + return -EINVAL; + + target_fsb = target_freq / (fid * 100); + + freqs.old = nforce2_get(policy->cpu); + freqs.new = target_fsb * fid * 100; + + if (freqs.old == freqs.new) + return 0; + + pr_debug("Old CPU frequency %d kHz, new %d kHz\n", + freqs.old, freqs.new); + + cpufreq_freq_transition_begin(policy, &freqs); + + /* Disable IRQs */ + /* local_irq_save(flags); */ + + if (nforce2_set_fsb(target_fsb) < 0) + printk(KERN_ERR PFX "Changing FSB to %d failed\n", + target_fsb); + else + pr_debug("Changed FSB successfully to %d\n", + target_fsb); + + /* Enable IRQs */ + /* local_irq_restore(flags); */ + + cpufreq_freq_transition_end(policy, &freqs, 0); + + return 0; +} + +/** + * nforce2_verify - verifies a new CPUFreq policy + * @policy: new policy + */ +static int nforce2_verify(struct cpufreq_policy *policy) +{ + unsigned int fsb_pol_max; + + fsb_pol_max = policy->max / (fid * 100); + + if (policy->min < (fsb_pol_max * fid * 100)) + policy->max = (fsb_pol_max + 1) * fid * 100; + + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +static int nforce2_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int fsb; + unsigned int rfid; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + /* Get current FSB */ + fsb = nforce2_fsb_read(0); + + if (!fsb) + return -EIO; + + /* FIX: Get FID from CPU */ + if (!fid) { + if (!cpu_khz) { + printk(KERN_WARNING PFX + "cpu_khz not set, can't calculate multiplier!\n"); + return -ENODEV; + } + + fid = cpu_khz / (fsb * 100); + rfid = fid % 5; + + if (rfid) { + if (rfid > 2) + fid += 5 - rfid; + else + fid -= rfid; + } + } + + printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, + fid / 10, fid % 10); + + /* Set maximum FSB to FSB at boot time */ + max_fsb = nforce2_fsb_read(1); + + if (!max_fsb) + return -EIO; + + if (!min_fsb) + min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE; + + if (min_fsb < NFORCE2_MIN_FSB) + min_fsb = NFORCE2_MIN_FSB; + + /* cpuinfo and default policy values */ + policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100; + policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + + return 0; +} + +static int nforce2_cpu_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct cpufreq_driver nforce2_driver = { + .name = "nforce2", + .verify = nforce2_verify, + .target = nforce2_target, + .get = nforce2_get, + .init = nforce2_cpu_init, + .exit = nforce2_cpu_exit, +}; + +#ifdef MODULE +static const struct pci_device_id nforce2_ids[] = { + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2 }, + {} +}; +MODULE_DEVICE_TABLE(pci, nforce2_ids); +#endif + +/** + * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic + * + * Detects nForce2 A2 and C1 stepping + * + */ +static int nforce2_detect_chipset(void) +{ + nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NFORCE2, + PCI_ANY_ID, PCI_ANY_ID, NULL); + + if (nforce2_dev == NULL) + return -ENODEV; + + printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", + nforce2_dev->revision); + printk(KERN_INFO PFX + "FSB changing is maybe unstable and can lead to " + "crashes and data loss.\n"); + + return 0; +} + +/** + * nforce2_init - initializes the nForce2 CPUFreq driver + * + * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported + * devices, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init nforce2_init(void) +{ + /* TODO: do we need to detect the processor? */ + + /* detect chipset */ + if (nforce2_detect_chipset()) { + printk(KERN_INFO PFX "No nForce2 chipset.\n"); + return -ENODEV; + } + + return cpufreq_register_driver(&nforce2_driver); +} + +/** + * nforce2_exit - unregisters cpufreq module + * + * Unregisters nForce2 FSB change support. + */ +static void __exit nforce2_exit(void) +{ + cpufreq_unregister_driver(&nforce2_driver); +} + +module_init(nforce2_init); +module_exit(nforce2_exit); + diff --git a/kernel/drivers/cpufreq/cpufreq.c b/kernel/drivers/cpufreq/cpufreq.c new file mode 100644 index 000000000..ce1d93e93 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq.c @@ -0,0 +1,2511 @@ +/* + * linux/drivers/cpufreq/cpufreq.c + * + * Copyright (C) 2001 Russell King + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * (C) 2013 Viresh Kumar <viresh.kumar@linaro.org> + * + * Oct 2005 - Ashok Raj <ashok.raj@intel.com> + * Added handling for CPU hotplug + * Feb 2006 - Jacob Shin <jacob.shin@amd.com> + * Fix handling for CPU hotplug -- affected CPUs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/syscore_ops.h> +#include <linux/tick.h> +#include <trace/events/power.h> + +/* Macros to iterate over lists */ +/* Iterate over online CPUs policies */ +static LIST_HEAD(cpufreq_policy_list); +#define for_each_policy(__policy) \ + list_for_each_entry(__policy, &cpufreq_policy_list, policy_list) + +/* Iterate over governors */ +static LIST_HEAD(cpufreq_governor_list); +#define for_each_governor(__governor) \ + list_for_each_entry(__governor, &cpufreq_governor_list, governor_list) + +/** + * The "cpufreq driver" - the arch- or hardware-dependent low + * level driver of CPUFreq support, and its spinlock. This lock + * also protects the cpufreq_cpu_data array. + */ +static struct cpufreq_driver *cpufreq_driver; +static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); +static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data_fallback); +static DEFINE_RWLOCK(cpufreq_driver_lock); +DEFINE_MUTEX(cpufreq_governor_lock); + +/* This one keeps track of the previously set governor of a removed CPU */ +static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); + +/* Flag to suspend/resume CPUFreq governors */ +static bool cpufreq_suspended; + +static inline bool has_target(void) +{ + return cpufreq_driver->target_index || cpufreq_driver->target; +} + +/* internal prototypes */ +static int __cpufreq_governor(struct cpufreq_policy *policy, + unsigned int event); +static unsigned int __cpufreq_get(struct cpufreq_policy *policy); +static void handle_update(struct work_struct *work); + +/** + * Two notifier lists: the "policy" list is involved in the + * validation process for a new CPU frequency policy; the + * "transition" list for kernel code that needs to handle + * changes to devices when the CPU clock speed changes. + * The mutex locks both lists. + */ +static BLOCKING_NOTIFIER_HEAD(cpufreq_policy_notifier_list); +static struct srcu_notifier_head cpufreq_transition_notifier_list; + +static bool init_cpufreq_transition_notifier_list_called; +static int __init init_cpufreq_transition_notifier_list(void) +{ + srcu_init_notifier_head(&cpufreq_transition_notifier_list); + init_cpufreq_transition_notifier_list_called = true; + return 0; +} +pure_initcall(init_cpufreq_transition_notifier_list); + +static int off __read_mostly; +static int cpufreq_disabled(void) +{ + return off; +} +void disable_cpufreq(void) +{ + off = 1; +} +static DEFINE_MUTEX(cpufreq_governor_mutex); + +bool have_governor_per_policy(void) +{ + return !!(cpufreq_driver->flags & CPUFREQ_HAVE_GOVERNOR_PER_POLICY); +} +EXPORT_SYMBOL_GPL(have_governor_per_policy); + +struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) +{ + if (have_governor_per_policy()) + return &policy->kobj; + else + return cpufreq_global_kobject; +} +EXPORT_SYMBOL_GPL(get_governor_parent_kobj); + +static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) +{ + u64 idle_time; + u64 cur_wall_time; + u64 busy_time; + + cur_wall_time = jiffies64_to_cputime64(get_jiffies_64()); + + busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE]; + + idle_time = cur_wall_time - busy_time; + if (wall) + *wall = cputime_to_usecs(cur_wall_time); + + return cputime_to_usecs(idle_time); +} + +u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) +{ + u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); + + if (idle_time == -1ULL) + return get_cpu_idle_time_jiffy(cpu, wall); + else if (!io_busy) + idle_time += get_cpu_iowait_time_us(cpu, wall); + + return idle_time; +} +EXPORT_SYMBOL_GPL(get_cpu_idle_time); + +/* + * This is a generic cpufreq init() routine which can be used by cpufreq + * drivers of SMP systems. It will do following: + * - validate & show freq table passed + * - set policies transition latency + * - policy->cpus with all possible CPUs + */ +int cpufreq_generic_init(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table, + unsigned int transition_latency) +{ + int ret; + + ret = cpufreq_table_validate_and_show(policy, table); + if (ret) { + pr_err("%s: invalid frequency table: %d\n", __func__, ret); + return ret; + } + + policy->cpuinfo.transition_latency = transition_latency; + + /* + * The driver only supports the SMP configuartion where all processors + * share the clock and voltage and clock. + */ + cpumask_setall(policy->cpus); + + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_generic_init); + +unsigned int cpufreq_generic_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); + + if (!policy || IS_ERR(policy->clk)) { + pr_err("%s: No %s associated to cpu: %d\n", + __func__, policy ? "clk" : "policy", cpu); + return 0; + } + + return clk_get_rate(policy->clk) / 1000; +} +EXPORT_SYMBOL_GPL(cpufreq_generic_get); + +/* Only for cpufreq core internal use */ +struct cpufreq_policy *cpufreq_cpu_get_raw(unsigned int cpu) +{ + return per_cpu(cpufreq_cpu_data, cpu); +} + +struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = NULL; + unsigned long flags; + + if (cpu >= nr_cpu_ids) + return NULL; + + /* get the cpufreq driver */ + read_lock_irqsave(&cpufreq_driver_lock, flags); + + if (cpufreq_driver) { + /* get the CPU */ + policy = per_cpu(cpufreq_cpu_data, cpu); + if (policy) + kobject_get(&policy->kobj); + } + + read_unlock_irqrestore(&cpufreq_driver_lock, flags); + + return policy; +} +EXPORT_SYMBOL_GPL(cpufreq_cpu_get); + +void cpufreq_cpu_put(struct cpufreq_policy *policy) +{ + kobject_put(&policy->kobj); +} +EXPORT_SYMBOL_GPL(cpufreq_cpu_put); + +/********************************************************************* + * EXTERNALLY AFFECTING FREQUENCY CHANGES * + *********************************************************************/ + +/** + * adjust_jiffies - adjust the system "loops_per_jiffy" + * + * This function alters the system "loops_per_jiffy" for the clock + * speed change. Note that loops_per_jiffy cannot be updated on SMP + * systems as each CPU might be scaled differently. So, use the arch + * per-CPU loops_per_jiffy value wherever possible. + */ +static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) +{ +#ifndef CONFIG_SMP + static unsigned long l_p_j_ref; + static unsigned int l_p_j_ref_freq; + + if (ci->flags & CPUFREQ_CONST_LOOPS) + return; + + if (!l_p_j_ref_freq) { + l_p_j_ref = loops_per_jiffy; + l_p_j_ref_freq = ci->old; + pr_debug("saving %lu as reference value for loops_per_jiffy; freq is %u kHz\n", + l_p_j_ref, l_p_j_ref_freq); + } + if (val == CPUFREQ_POSTCHANGE && ci->old != ci->new) { + loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, + ci->new); + pr_debug("scaling loops_per_jiffy to %lu for frequency %u kHz\n", + loops_per_jiffy, ci->new); + } +#endif +} + +static void __cpufreq_notify_transition(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, unsigned int state) +{ + BUG_ON(irqs_disabled()); + + if (cpufreq_disabled()) + return; + + freqs->flags = cpufreq_driver->flags; + pr_debug("notification %u of frequency transition to %u kHz\n", + state, freqs->new); + + switch (state) { + + case CPUFREQ_PRECHANGE: + /* detect if the driver reported a value as "old frequency" + * which is not equal to what the cpufreq core thinks is + * "old frequency". + */ + if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) { + if ((policy) && (policy->cpu == freqs->cpu) && + (policy->cur) && (policy->cur != freqs->old)) { + pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n", + freqs->old, policy->cur); + freqs->old = policy->cur; + } + } + srcu_notifier_call_chain(&cpufreq_transition_notifier_list, + CPUFREQ_PRECHANGE, freqs); + adjust_jiffies(CPUFREQ_PRECHANGE, freqs); + break; + + case CPUFREQ_POSTCHANGE: + adjust_jiffies(CPUFREQ_POSTCHANGE, freqs); + pr_debug("FREQ: %lu - CPU: %lu\n", + (unsigned long)freqs->new, (unsigned long)freqs->cpu); + trace_cpu_frequency(freqs->new, freqs->cpu); + srcu_notifier_call_chain(&cpufreq_transition_notifier_list, + CPUFREQ_POSTCHANGE, freqs); + if (likely(policy) && likely(policy->cpu == freqs->cpu)) + policy->cur = freqs->new; + break; + } +} + +/** + * cpufreq_notify_transition - call notifier chain and adjust_jiffies + * on frequency transition. + * + * This function calls the transition notifiers and the "adjust_jiffies" + * function. It is called twice on all CPU frequency changes that have + * external effects. + */ +static void cpufreq_notify_transition(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, unsigned int state) +{ + for_each_cpu(freqs->cpu, policy->cpus) + __cpufreq_notify_transition(policy, freqs, state); +} + +/* Do post notifications when there are chances that transition has failed */ +static void cpufreq_notify_post_transition(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, int transition_failed) +{ + cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE); + if (!transition_failed) + return; + + swap(freqs->old, freqs->new); + cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE); +} + +void cpufreq_freq_transition_begin(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs) +{ + + /* + * Catch double invocations of _begin() which lead to self-deadlock. + * ASYNC_NOTIFICATION drivers are left out because the cpufreq core + * doesn't invoke _begin() on their behalf, and hence the chances of + * double invocations are very low. Moreover, there are scenarios + * where these checks can emit false-positive warnings in these + * drivers; so we avoid that by skipping them altogether. + */ + WARN_ON(!(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION) + && current == policy->transition_task); + +wait: + wait_event(policy->transition_wait, !policy->transition_ongoing); + + spin_lock(&policy->transition_lock); + + if (unlikely(policy->transition_ongoing)) { + spin_unlock(&policy->transition_lock); + goto wait; + } + + policy->transition_ongoing = true; + policy->transition_task = current; + + spin_unlock(&policy->transition_lock); + + cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE); +} +EXPORT_SYMBOL_GPL(cpufreq_freq_transition_begin); + +void cpufreq_freq_transition_end(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, int transition_failed) +{ + if (unlikely(WARN_ON(!policy->transition_ongoing))) + return; + + cpufreq_notify_post_transition(policy, freqs, transition_failed); + + policy->transition_ongoing = false; + policy->transition_task = NULL; + + wake_up(&policy->transition_wait); +} +EXPORT_SYMBOL_GPL(cpufreq_freq_transition_end); + + +/********************************************************************* + * SYSFS INTERFACE * + *********************************************************************/ +static ssize_t show_boost(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", cpufreq_driver->boost_enabled); +} + +static ssize_t store_boost(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + int ret, enable; + + ret = sscanf(buf, "%d", &enable); + if (ret != 1 || enable < 0 || enable > 1) + return -EINVAL; + + if (cpufreq_boost_trigger_state(enable)) { + pr_err("%s: Cannot %s BOOST!\n", + __func__, enable ? "enable" : "disable"); + return -EINVAL; + } + + pr_debug("%s: cpufreq BOOST %s\n", + __func__, enable ? "enabled" : "disabled"); + + return count; +} +define_one_global_rw(boost); + +static struct cpufreq_governor *find_governor(const char *str_governor) +{ + struct cpufreq_governor *t; + + for_each_governor(t) + if (!strncasecmp(str_governor, t->name, CPUFREQ_NAME_LEN)) + return t; + + return NULL; +} + +/** + * cpufreq_parse_governor - parse a governor string + */ +static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, + struct cpufreq_governor **governor) +{ + int err = -EINVAL; + + if (!cpufreq_driver) + goto out; + + if (cpufreq_driver->setpolicy) { + if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) { + *policy = CPUFREQ_POLICY_PERFORMANCE; + err = 0; + } else if (!strncasecmp(str_governor, "powersave", + CPUFREQ_NAME_LEN)) { + *policy = CPUFREQ_POLICY_POWERSAVE; + err = 0; + } + } else { + struct cpufreq_governor *t; + + mutex_lock(&cpufreq_governor_mutex); + + t = find_governor(str_governor); + + if (t == NULL) { + int ret; + + mutex_unlock(&cpufreq_governor_mutex); + ret = request_module("cpufreq_%s", str_governor); + mutex_lock(&cpufreq_governor_mutex); + + if (ret == 0) + t = find_governor(str_governor); + } + + if (t != NULL) { + *governor = t; + err = 0; + } + + mutex_unlock(&cpufreq_governor_mutex); + } +out: + return err; +} + +/** + * cpufreq_per_cpu_attr_read() / show_##file_name() - + * print out cpufreq information + * + * Write out information from cpufreq_driver->policy[cpu]; object must be + * "unsigned int". + */ + +#define show_one(file_name, object) \ +static ssize_t show_##file_name \ +(struct cpufreq_policy *policy, char *buf) \ +{ \ + return sprintf(buf, "%u\n", policy->object); \ +} + +show_one(cpuinfo_min_freq, cpuinfo.min_freq); +show_one(cpuinfo_max_freq, cpuinfo.max_freq); +show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); +show_one(scaling_min_freq, min); +show_one(scaling_max_freq, max); + +static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf) +{ + ssize_t ret; + + if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get) + ret = sprintf(buf, "%u\n", cpufreq_driver->get(policy->cpu)); + else + ret = sprintf(buf, "%u\n", policy->cur); + return ret; +} + +static int cpufreq_set_policy(struct cpufreq_policy *policy, + struct cpufreq_policy *new_policy); + +/** + * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access + */ +#define store_one(file_name, object) \ +static ssize_t store_##file_name \ +(struct cpufreq_policy *policy, const char *buf, size_t count) \ +{ \ + int ret, temp; \ + struct cpufreq_policy new_policy; \ + \ + ret = cpufreq_get_policy(&new_policy, policy->cpu); \ + if (ret) \ + return -EINVAL; \ + \ + ret = sscanf(buf, "%u", &new_policy.object); \ + if (ret != 1) \ + return -EINVAL; \ + \ + temp = new_policy.object; \ + ret = cpufreq_set_policy(policy, &new_policy); \ + if (!ret) \ + policy->user_policy.object = temp; \ + \ + return ret ? ret : count; \ +} + +store_one(scaling_min_freq, min); +store_one(scaling_max_freq, max); + +/** + * show_cpuinfo_cur_freq - current CPU frequency as detected by hardware + */ +static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy, + char *buf) +{ + unsigned int cur_freq = __cpufreq_get(policy); + if (!cur_freq) + return sprintf(buf, "<unknown>"); + return sprintf(buf, "%u\n", cur_freq); +} + +/** + * show_scaling_governor - show the current policy for the specified CPU + */ +static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf) +{ + if (policy->policy == CPUFREQ_POLICY_POWERSAVE) + return sprintf(buf, "powersave\n"); + else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) + return sprintf(buf, "performance\n"); + else if (policy->governor) + return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", + policy->governor->name); + return -EINVAL; +} + +/** + * store_scaling_governor - store policy for the specified CPU + */ +static ssize_t store_scaling_governor(struct cpufreq_policy *policy, + const char *buf, size_t count) +{ + int ret; + char str_governor[16]; + struct cpufreq_policy new_policy; + + ret = cpufreq_get_policy(&new_policy, policy->cpu); + if (ret) + return ret; + + ret = sscanf(buf, "%15s", str_governor); + if (ret != 1) + return -EINVAL; + + if (cpufreq_parse_governor(str_governor, &new_policy.policy, + &new_policy.governor)) + return -EINVAL; + + ret = cpufreq_set_policy(policy, &new_policy); + + policy->user_policy.policy = policy->policy; + policy->user_policy.governor = policy->governor; + + if (ret) + return ret; + else + return count; +} + +/** + * show_scaling_driver - show the cpufreq driver currently loaded + */ +static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf) +{ + return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", cpufreq_driver->name); +} + +/** + * show_scaling_available_governors - show the available CPUfreq governors + */ +static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy, + char *buf) +{ + ssize_t i = 0; + struct cpufreq_governor *t; + + if (!has_target()) { + i += sprintf(buf, "performance powersave"); + goto out; + } + + for_each_governor(t) { + if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char)) + - (CPUFREQ_NAME_LEN + 2))) + goto out; + i += scnprintf(&buf[i], CPUFREQ_NAME_PLEN, "%s ", t->name); + } +out: + i += sprintf(&buf[i], "\n"); + return i; +} + +ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf) +{ + ssize_t i = 0; + unsigned int cpu; + + for_each_cpu(cpu, mask) { + if (i) + i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " "); + i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu); + if (i >= (PAGE_SIZE - 5)) + break; + } + i += sprintf(&buf[i], "\n"); + return i; +} +EXPORT_SYMBOL_GPL(cpufreq_show_cpus); + +/** + * show_related_cpus - show the CPUs affected by each transition even if + * hw coordination is in use + */ +static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf) +{ + return cpufreq_show_cpus(policy->related_cpus, buf); +} + +/** + * show_affected_cpus - show the CPUs affected by each transition + */ +static ssize_t show_affected_cpus(struct cpufreq_policy *policy, char *buf) +{ + return cpufreq_show_cpus(policy->cpus, buf); +} + +static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, + const char *buf, size_t count) +{ + unsigned int freq = 0; + unsigned int ret; + + if (!policy->governor || !policy->governor->store_setspeed) + return -EINVAL; + + ret = sscanf(buf, "%u", &freq); + if (ret != 1) + return -EINVAL; + + policy->governor->store_setspeed(policy, freq); + + return count; +} + +static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf) +{ + if (!policy->governor || !policy->governor->show_setspeed) + return sprintf(buf, "<unsupported>\n"); + + return policy->governor->show_setspeed(policy, buf); +} + +/** + * show_bios_limit - show the current cpufreq HW/BIOS limitation + */ +static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf) +{ + unsigned int limit; + int ret; + if (cpufreq_driver->bios_limit) { + ret = cpufreq_driver->bios_limit(policy->cpu, &limit); + if (!ret) + return sprintf(buf, "%u\n", limit); + } + return sprintf(buf, "%u\n", policy->cpuinfo.max_freq); +} + +cpufreq_freq_attr_ro_perm(cpuinfo_cur_freq, 0400); +cpufreq_freq_attr_ro(cpuinfo_min_freq); +cpufreq_freq_attr_ro(cpuinfo_max_freq); +cpufreq_freq_attr_ro(cpuinfo_transition_latency); +cpufreq_freq_attr_ro(scaling_available_governors); +cpufreq_freq_attr_ro(scaling_driver); +cpufreq_freq_attr_ro(scaling_cur_freq); +cpufreq_freq_attr_ro(bios_limit); +cpufreq_freq_attr_ro(related_cpus); +cpufreq_freq_attr_ro(affected_cpus); +cpufreq_freq_attr_rw(scaling_min_freq); +cpufreq_freq_attr_rw(scaling_max_freq); +cpufreq_freq_attr_rw(scaling_governor); +cpufreq_freq_attr_rw(scaling_setspeed); + +static struct attribute *default_attrs[] = { + &cpuinfo_min_freq.attr, + &cpuinfo_max_freq.attr, + &cpuinfo_transition_latency.attr, + &scaling_min_freq.attr, + &scaling_max_freq.attr, + &affected_cpus.attr, + &related_cpus.attr, + &scaling_governor.attr, + &scaling_driver.attr, + &scaling_available_governors.attr, + &scaling_setspeed.attr, + NULL +}; + +#define to_policy(k) container_of(k, struct cpufreq_policy, kobj) +#define to_attr(a) container_of(a, struct freq_attr, attr) + +static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) +{ + struct cpufreq_policy *policy = to_policy(kobj); + struct freq_attr *fattr = to_attr(attr); + ssize_t ret; + + down_read(&policy->rwsem); + + if (fattr->show) + ret = fattr->show(policy, buf); + else + ret = -EIO; + + up_read(&policy->rwsem); + + return ret; +} + +static ssize_t store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct cpufreq_policy *policy = to_policy(kobj); + struct freq_attr *fattr = to_attr(attr); + ssize_t ret = -EINVAL; + + get_online_cpus(); + + if (!cpu_online(policy->cpu)) + goto unlock; + + down_write(&policy->rwsem); + + if (fattr->store) + ret = fattr->store(policy, buf, count); + else + ret = -EIO; + + up_write(&policy->rwsem); +unlock: + put_online_cpus(); + + return ret; +} + +static void cpufreq_sysfs_release(struct kobject *kobj) +{ + struct cpufreq_policy *policy = to_policy(kobj); + pr_debug("last reference is dropped\n"); + complete(&policy->kobj_unregister); +} + +static const struct sysfs_ops sysfs_ops = { + .show = show, + .store = store, +}; + +static struct kobj_type ktype_cpufreq = { + .sysfs_ops = &sysfs_ops, + .default_attrs = default_attrs, + .release = cpufreq_sysfs_release, +}; + +struct kobject *cpufreq_global_kobject; +EXPORT_SYMBOL(cpufreq_global_kobject); + +static int cpufreq_global_kobject_usage; + +int cpufreq_get_global_kobject(void) +{ + if (!cpufreq_global_kobject_usage++) + return kobject_add(cpufreq_global_kobject, + &cpu_subsys.dev_root->kobj, "%s", "cpufreq"); + + return 0; +} +EXPORT_SYMBOL(cpufreq_get_global_kobject); + +void cpufreq_put_global_kobject(void) +{ + if (!--cpufreq_global_kobject_usage) + kobject_del(cpufreq_global_kobject); +} +EXPORT_SYMBOL(cpufreq_put_global_kobject); + +int cpufreq_sysfs_create_file(const struct attribute *attr) +{ + int ret = cpufreq_get_global_kobject(); + + if (!ret) { + ret = sysfs_create_file(cpufreq_global_kobject, attr); + if (ret) + cpufreq_put_global_kobject(); + } + + return ret; +} +EXPORT_SYMBOL(cpufreq_sysfs_create_file); + +void cpufreq_sysfs_remove_file(const struct attribute *attr) +{ + sysfs_remove_file(cpufreq_global_kobject, attr); + cpufreq_put_global_kobject(); +} +EXPORT_SYMBOL(cpufreq_sysfs_remove_file); + +/* symlink affected CPUs */ +static int cpufreq_add_dev_symlink(struct cpufreq_policy *policy) +{ + unsigned int j; + int ret = 0; + + for_each_cpu(j, policy->cpus) { + struct device *cpu_dev; + + if (j == policy->cpu) + continue; + + pr_debug("Adding link for CPU: %u\n", j); + cpu_dev = get_cpu_device(j); + ret = sysfs_create_link(&cpu_dev->kobj, &policy->kobj, + "cpufreq"); + if (ret) + break; + } + return ret; +} + +static int cpufreq_add_dev_interface(struct cpufreq_policy *policy, + struct device *dev) +{ + struct freq_attr **drv_attr; + int ret = 0; + + /* set up files for this cpu device */ + drv_attr = cpufreq_driver->attr; + while (drv_attr && *drv_attr) { + ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); + if (ret) + return ret; + drv_attr++; + } + if (cpufreq_driver->get) { + ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); + if (ret) + return ret; + } + + ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); + if (ret) + return ret; + + if (cpufreq_driver->bios_limit) { + ret = sysfs_create_file(&policy->kobj, &bios_limit.attr); + if (ret) + return ret; + } + + return cpufreq_add_dev_symlink(policy); +} + +static void cpufreq_init_policy(struct cpufreq_policy *policy) +{ + struct cpufreq_governor *gov = NULL; + struct cpufreq_policy new_policy; + int ret = 0; + + memcpy(&new_policy, policy, sizeof(*policy)); + + /* Update governor of new_policy to the governor used before hotplug */ + gov = find_governor(per_cpu(cpufreq_cpu_governor, policy->cpu)); + if (gov) + pr_debug("Restoring governor %s for cpu %d\n", + policy->governor->name, policy->cpu); + else + gov = CPUFREQ_DEFAULT_GOVERNOR; + + new_policy.governor = gov; + + /* Use the default policy if its valid. */ + if (cpufreq_driver->setpolicy) + cpufreq_parse_governor(gov->name, &new_policy.policy, NULL); + + /* set default policy */ + ret = cpufreq_set_policy(policy, &new_policy); + if (ret) { + pr_debug("setting policy failed\n"); + if (cpufreq_driver->exit) + cpufreq_driver->exit(policy); + } +} + +static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, + unsigned int cpu, struct device *dev) +{ + int ret = 0; + unsigned long flags; + + if (has_target()) { + ret = __cpufreq_governor(policy, CPUFREQ_GOV_STOP); + if (ret) { + pr_err("%s: Failed to stop governor\n", __func__); + return ret; + } + } + + down_write(&policy->rwsem); + + write_lock_irqsave(&cpufreq_driver_lock, flags); + + cpumask_set_cpu(cpu, policy->cpus); + per_cpu(cpufreq_cpu_data, cpu) = policy; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + up_write(&policy->rwsem); + + if (has_target()) { + ret = __cpufreq_governor(policy, CPUFREQ_GOV_START); + if (!ret) + ret = __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS); + + if (ret) { + pr_err("%s: Failed to start governor\n", __func__); + return ret; + } + } + + return sysfs_create_link(&dev->kobj, &policy->kobj, "cpufreq"); +} + +static struct cpufreq_policy *cpufreq_policy_restore(unsigned int cpu) +{ + struct cpufreq_policy *policy; + unsigned long flags; + + read_lock_irqsave(&cpufreq_driver_lock, flags); + + policy = per_cpu(cpufreq_cpu_data_fallback, cpu); + + read_unlock_irqrestore(&cpufreq_driver_lock, flags); + + if (policy) + policy->governor = NULL; + + return policy; +} + +static struct cpufreq_policy *cpufreq_policy_alloc(void) +{ + struct cpufreq_policy *policy; + + policy = kzalloc(sizeof(*policy), GFP_KERNEL); + if (!policy) + return NULL; + + if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) + goto err_free_policy; + + if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) + goto err_free_cpumask; + + INIT_LIST_HEAD(&policy->policy_list); + init_rwsem(&policy->rwsem); + spin_lock_init(&policy->transition_lock); + init_waitqueue_head(&policy->transition_wait); + init_completion(&policy->kobj_unregister); + INIT_WORK(&policy->update, handle_update); + + return policy; + +err_free_cpumask: + free_cpumask_var(policy->cpus); +err_free_policy: + kfree(policy); + + return NULL; +} + +static void cpufreq_policy_put_kobj(struct cpufreq_policy *policy) +{ + struct kobject *kobj; + struct completion *cmp; + + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_REMOVE_POLICY, policy); + + down_read(&policy->rwsem); + kobj = &policy->kobj; + cmp = &policy->kobj_unregister; + up_read(&policy->rwsem); + kobject_put(kobj); + + /* + * We need to make sure that the underlying kobj is + * actually not referenced anymore by anybody before we + * proceed with unloading. + */ + pr_debug("waiting for dropping of refcount\n"); + wait_for_completion(cmp); + pr_debug("wait complete\n"); +} + +static void cpufreq_policy_free(struct cpufreq_policy *policy) +{ + free_cpumask_var(policy->related_cpus); + free_cpumask_var(policy->cpus); + kfree(policy); +} + +static int update_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu, + struct device *cpu_dev) +{ + int ret; + + if (WARN_ON(cpu == policy->cpu)) + return 0; + + /* Move kobject to the new policy->cpu */ + ret = kobject_move(&policy->kobj, &cpu_dev->kobj); + if (ret) { + pr_err("%s: Failed to move kobj: %d\n", __func__, ret); + return ret; + } + + down_write(&policy->rwsem); + policy->cpu = cpu; + up_write(&policy->rwsem); + + return 0; +} + +static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) +{ + unsigned int j, cpu = dev->id; + int ret = -ENOMEM; + struct cpufreq_policy *policy; + unsigned long flags; + bool recover_policy = cpufreq_suspended; + + if (cpu_is_offline(cpu)) + return 0; + + pr_debug("adding CPU %u\n", cpu); + + /* check whether a different CPU already registered this + * CPU because it is in the same boat. */ + policy = cpufreq_cpu_get_raw(cpu); + if (unlikely(policy)) + return 0; + + /* Check if this cpu was hot-unplugged earlier and has siblings */ + read_lock_irqsave(&cpufreq_driver_lock, flags); + for_each_policy(policy) { + if (cpumask_test_cpu(cpu, policy->related_cpus)) { + read_unlock_irqrestore(&cpufreq_driver_lock, flags); + ret = cpufreq_add_policy_cpu(policy, cpu, dev); + return ret; + } + } + read_unlock_irqrestore(&cpufreq_driver_lock, flags); + + /* + * Restore the saved policy when doing light-weight init and fall back + * to the full init if that fails. + */ + policy = recover_policy ? cpufreq_policy_restore(cpu) : NULL; + if (!policy) { + recover_policy = false; + policy = cpufreq_policy_alloc(); + if (!policy) + goto nomem_out; + } + + /* + * In the resume path, since we restore a saved policy, the assignment + * to policy->cpu is like an update of the existing policy, rather than + * the creation of a brand new one. So we need to perform this update + * by invoking update_policy_cpu(). + */ + if (recover_policy && cpu != policy->cpu) + WARN_ON(update_policy_cpu(policy, cpu, dev)); + else + policy->cpu = cpu; + + cpumask_copy(policy->cpus, cpumask_of(cpu)); + + /* call driver. From then on the cpufreq must be able + * to accept all calls to ->verify and ->setpolicy for this CPU + */ + ret = cpufreq_driver->init(policy); + if (ret) { + pr_debug("initialization failed\n"); + goto err_set_policy_cpu; + } + + down_write(&policy->rwsem); + + /* related cpus should atleast have policy->cpus */ + cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus); + + /* + * affected cpus must always be the one, which are online. We aren't + * managing offline cpus here. + */ + cpumask_and(policy->cpus, policy->cpus, cpu_online_mask); + + if (!recover_policy) { + policy->user_policy.min = policy->min; + policy->user_policy.max = policy->max; + + /* prepare interface data */ + ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, + &dev->kobj, "cpufreq"); + if (ret) { + pr_err("%s: failed to init policy->kobj: %d\n", + __func__, ret); + goto err_init_policy_kobj; + } + } + + write_lock_irqsave(&cpufreq_driver_lock, flags); + for_each_cpu(j, policy->cpus) + per_cpu(cpufreq_cpu_data, j) = policy; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { + policy->cur = cpufreq_driver->get(policy->cpu); + if (!policy->cur) { + pr_err("%s: ->get() failed\n", __func__); + goto err_get_freq; + } + } + + /* + * Sometimes boot loaders set CPU frequency to a value outside of + * frequency table present with cpufreq core. In such cases CPU might be + * unstable if it has to run on that frequency for long duration of time + * and so its better to set it to a frequency which is specified in + * freq-table. This also makes cpufreq stats inconsistent as + * cpufreq-stats would fail to register because current frequency of CPU + * isn't found in freq-table. + * + * Because we don't want this change to effect boot process badly, we go + * for the next freq which is >= policy->cur ('cur' must be set by now, + * otherwise we will end up setting freq to lowest of the table as 'cur' + * is initialized to zero). + * + * We are passing target-freq as "policy->cur - 1" otherwise + * __cpufreq_driver_target() would simply fail, as policy->cur will be + * equal to target-freq. + */ + if ((cpufreq_driver->flags & CPUFREQ_NEED_INITIAL_FREQ_CHECK) + && has_target()) { + /* Are we running at unknown frequency ? */ + ret = cpufreq_frequency_table_get_index(policy, policy->cur); + if (ret == -EINVAL) { + /* Warn user and fix it */ + pr_warn("%s: CPU%d: Running at unlisted freq: %u KHz\n", + __func__, policy->cpu, policy->cur); + ret = __cpufreq_driver_target(policy, policy->cur - 1, + CPUFREQ_RELATION_L); + + /* + * Reaching here after boot in a few seconds may not + * mean that system will remain stable at "unknown" + * frequency for longer duration. Hence, a BUG_ON(). + */ + BUG_ON(ret); + pr_warn("%s: CPU%d: Unlisted initial frequency changed to: %u KHz\n", + __func__, policy->cpu, policy->cur); + } + } + + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_START, policy); + + if (!recover_policy) { + ret = cpufreq_add_dev_interface(policy, dev); + if (ret) + goto err_out_unregister; + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_CREATE_POLICY, policy); + } + + write_lock_irqsave(&cpufreq_driver_lock, flags); + list_add(&policy->policy_list, &cpufreq_policy_list); + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + cpufreq_init_policy(policy); + + if (!recover_policy) { + policy->user_policy.policy = policy->policy; + policy->user_policy.governor = policy->governor; + } + up_write(&policy->rwsem); + + kobject_uevent(&policy->kobj, KOBJ_ADD); + + /* Callback for handling stuff after policy is ready */ + if (cpufreq_driver->ready) + cpufreq_driver->ready(policy); + + pr_debug("initialization complete\n"); + + return 0; + +err_out_unregister: +err_get_freq: + write_lock_irqsave(&cpufreq_driver_lock, flags); + for_each_cpu(j, policy->cpus) + per_cpu(cpufreq_cpu_data, j) = NULL; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + if (!recover_policy) { + kobject_put(&policy->kobj); + wait_for_completion(&policy->kobj_unregister); + } +err_init_policy_kobj: + up_write(&policy->rwsem); + + if (cpufreq_driver->exit) + cpufreq_driver->exit(policy); +err_set_policy_cpu: + if (recover_policy) { + /* Do not leave stale fallback data behind. */ + per_cpu(cpufreq_cpu_data_fallback, cpu) = NULL; + cpufreq_policy_put_kobj(policy); + } + cpufreq_policy_free(policy); + +nomem_out: + return ret; +} + +/** + * cpufreq_add_dev - add a CPU device + * + * Adds the cpufreq interface for a CPU device. + * + * The Oracle says: try running cpufreq registration/unregistration concurrently + * with with cpu hotplugging and all hell will break loose. Tried to clean this + * mess up, but more thorough testing is needed. - Mathieu + */ +static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) +{ + return __cpufreq_add_dev(dev, sif); +} + +static int __cpufreq_remove_dev_prepare(struct device *dev, + struct subsys_interface *sif) +{ + unsigned int cpu = dev->id, cpus; + int ret; + unsigned long flags; + struct cpufreq_policy *policy; + + pr_debug("%s: unregistering CPU %u\n", __func__, cpu); + + write_lock_irqsave(&cpufreq_driver_lock, flags); + + policy = per_cpu(cpufreq_cpu_data, cpu); + + /* Save the policy somewhere when doing a light-weight tear-down */ + if (cpufreq_suspended) + per_cpu(cpufreq_cpu_data_fallback, cpu) = policy; + + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + if (!policy) { + pr_debug("%s: No cpu_data found\n", __func__); + return -EINVAL; + } + + if (has_target()) { + ret = __cpufreq_governor(policy, CPUFREQ_GOV_STOP); + if (ret) { + pr_err("%s: Failed to stop governor\n", __func__); + return ret; + } + + strncpy(per_cpu(cpufreq_cpu_governor, cpu), + policy->governor->name, CPUFREQ_NAME_LEN); + } + + down_read(&policy->rwsem); + cpus = cpumask_weight(policy->cpus); + up_read(&policy->rwsem); + + if (cpu != policy->cpu) { + sysfs_remove_link(&dev->kobj, "cpufreq"); + } else if (cpus > 1) { + /* Nominate new CPU */ + int new_cpu = cpumask_any_but(policy->cpus, cpu); + struct device *cpu_dev = get_cpu_device(new_cpu); + + sysfs_remove_link(&cpu_dev->kobj, "cpufreq"); + ret = update_policy_cpu(policy, new_cpu, cpu_dev); + if (ret) { + if (sysfs_create_link(&cpu_dev->kobj, &policy->kobj, + "cpufreq")) + pr_err("%s: Failed to restore kobj link to cpu:%d\n", + __func__, cpu_dev->id); + return ret; + } + + if (!cpufreq_suspended) + pr_debug("%s: policy Kobject moved to cpu: %d from: %d\n", + __func__, new_cpu, cpu); + } else if (cpufreq_driver->stop_cpu) { + cpufreq_driver->stop_cpu(policy); + } + + return 0; +} + +static int __cpufreq_remove_dev_finish(struct device *dev, + struct subsys_interface *sif) +{ + unsigned int cpu = dev->id, cpus; + int ret; + unsigned long flags; + struct cpufreq_policy *policy; + + write_lock_irqsave(&cpufreq_driver_lock, flags); + policy = per_cpu(cpufreq_cpu_data, cpu); + per_cpu(cpufreq_cpu_data, cpu) = NULL; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + if (!policy) { + pr_debug("%s: No cpu_data found\n", __func__); + return -EINVAL; + } + + down_write(&policy->rwsem); + cpus = cpumask_weight(policy->cpus); + + if (cpus > 1) + cpumask_clear_cpu(cpu, policy->cpus); + up_write(&policy->rwsem); + + /* If cpu is last user of policy, free policy */ + if (cpus == 1) { + if (has_target()) { + ret = __cpufreq_governor(policy, + CPUFREQ_GOV_POLICY_EXIT); + if (ret) { + pr_err("%s: Failed to exit governor\n", + __func__); + return ret; + } + } + + if (!cpufreq_suspended) + cpufreq_policy_put_kobj(policy); + + /* + * Perform the ->exit() even during light-weight tear-down, + * since this is a core component, and is essential for the + * subsequent light-weight ->init() to succeed. + */ + if (cpufreq_driver->exit) + cpufreq_driver->exit(policy); + + /* Remove policy from list of active policies */ + write_lock_irqsave(&cpufreq_driver_lock, flags); + list_del(&policy->policy_list); + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + if (!cpufreq_suspended) + cpufreq_policy_free(policy); + } else if (has_target()) { + ret = __cpufreq_governor(policy, CPUFREQ_GOV_START); + if (!ret) + ret = __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS); + + if (ret) { + pr_err("%s: Failed to start governor\n", __func__); + return ret; + } + } + + return 0; +} + +/** + * cpufreq_remove_dev - remove a CPU device + * + * Removes the cpufreq interface for a CPU device. + */ +static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) +{ + unsigned int cpu = dev->id; + int ret; + + if (cpu_is_offline(cpu)) + return 0; + + ret = __cpufreq_remove_dev_prepare(dev, sif); + + if (!ret) + ret = __cpufreq_remove_dev_finish(dev, sif); + + return ret; +} + +static void handle_update(struct work_struct *work) +{ + struct cpufreq_policy *policy = + container_of(work, struct cpufreq_policy, update); + unsigned int cpu = policy->cpu; + pr_debug("handle_update for cpu %u called\n", cpu); + cpufreq_update_policy(cpu); +} + +/** + * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're + * in deep trouble. + * @policy: policy managing CPUs + * @new_freq: CPU frequency the CPU actually runs at + * + * We adjust to current frequency first, and need to clean up later. + * So either call to cpufreq_update_policy() or schedule handle_update()). + */ +static void cpufreq_out_of_sync(struct cpufreq_policy *policy, + unsigned int new_freq) +{ + struct cpufreq_freqs freqs; + + pr_debug("Warning: CPU frequency out of sync: cpufreq and timing core thinks of %u, is %u kHz\n", + policy->cur, new_freq); + + freqs.old = policy->cur; + freqs.new = new_freq; + + cpufreq_freq_transition_begin(policy, &freqs); + cpufreq_freq_transition_end(policy, &freqs, 0); +} + +/** + * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur + * @cpu: CPU number + * + * This is the last known freq, without actually getting it from the driver. + * Return value will be same as what is shown in scaling_cur_freq in sysfs. + */ +unsigned int cpufreq_quick_get(unsigned int cpu) +{ + struct cpufreq_policy *policy; + unsigned int ret_freq = 0; + + if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get) + return cpufreq_driver->get(cpu); + + policy = cpufreq_cpu_get(cpu); + if (policy) { + ret_freq = policy->cur; + cpufreq_cpu_put(policy); + } + + return ret_freq; +} +EXPORT_SYMBOL(cpufreq_quick_get); + +/** + * cpufreq_quick_get_max - get the max reported CPU frequency for this CPU + * @cpu: CPU number + * + * Just return the max possible frequency for a given CPU. + */ +unsigned int cpufreq_quick_get_max(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + unsigned int ret_freq = 0; + + if (policy) { + ret_freq = policy->max; + cpufreq_cpu_put(policy); + } + + return ret_freq; +} +EXPORT_SYMBOL(cpufreq_quick_get_max); + +static unsigned int __cpufreq_get(struct cpufreq_policy *policy) +{ + unsigned int ret_freq = 0; + + if (!cpufreq_driver->get) + return ret_freq; + + ret_freq = cpufreq_driver->get(policy->cpu); + + if (ret_freq && policy->cur && + !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) { + /* verify no discrepancy between actual and + saved value exists */ + if (unlikely(ret_freq != policy->cur)) { + cpufreq_out_of_sync(policy, ret_freq); + schedule_work(&policy->update); + } + } + + return ret_freq; +} + +/** + * cpufreq_get - get the current CPU frequency (in kHz) + * @cpu: CPU number + * + * Get the CPU current (static) CPU frequency + */ +unsigned int cpufreq_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + unsigned int ret_freq = 0; + + if (policy) { + down_read(&policy->rwsem); + ret_freq = __cpufreq_get(policy); + up_read(&policy->rwsem); + + cpufreq_cpu_put(policy); + } + + return ret_freq; +} +EXPORT_SYMBOL(cpufreq_get); + +static struct subsys_interface cpufreq_interface = { + .name = "cpufreq", + .subsys = &cpu_subsys, + .add_dev = cpufreq_add_dev, + .remove_dev = cpufreq_remove_dev, +}; + +/* + * In case platform wants some specific frequency to be configured + * during suspend.. + */ +int cpufreq_generic_suspend(struct cpufreq_policy *policy) +{ + int ret; + + if (!policy->suspend_freq) { + pr_err("%s: suspend_freq can't be zero\n", __func__); + return -EINVAL; + } + + pr_debug("%s: Setting suspend-freq: %u\n", __func__, + policy->suspend_freq); + + ret = __cpufreq_driver_target(policy, policy->suspend_freq, + CPUFREQ_RELATION_H); + if (ret) + pr_err("%s: unable to set suspend-freq: %u. err: %d\n", + __func__, policy->suspend_freq, ret); + + return ret; +} +EXPORT_SYMBOL(cpufreq_generic_suspend); + +/** + * cpufreq_suspend() - Suspend CPUFreq governors + * + * Called during system wide Suspend/Hibernate cycles for suspending governors + * as some platforms can't change frequency after this point in suspend cycle. + * Because some of the devices (like: i2c, regulators, etc) they use for + * changing frequency are suspended quickly after this point. + */ +void cpufreq_suspend(void) +{ + struct cpufreq_policy *policy; + + if (!cpufreq_driver) + return; + + if (!has_target()) + goto suspend; + + pr_debug("%s: Suspending Governors\n", __func__); + + for_each_policy(policy) { + if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP)) + pr_err("%s: Failed to stop governor for policy: %p\n", + __func__, policy); + else if (cpufreq_driver->suspend + && cpufreq_driver->suspend(policy)) + pr_err("%s: Failed to suspend driver: %p\n", __func__, + policy); + } + +suspend: + cpufreq_suspended = true; +} + +/** + * cpufreq_resume() - Resume CPUFreq governors + * + * Called during system wide Suspend/Hibernate cycle for resuming governors that + * are suspended with cpufreq_suspend(). + */ +void cpufreq_resume(void) +{ + struct cpufreq_policy *policy; + + if (!cpufreq_driver) + return; + + cpufreq_suspended = false; + + if (!has_target()) + return; + + pr_debug("%s: Resuming Governors\n", __func__); + + for_each_policy(policy) { + if (cpufreq_driver->resume && cpufreq_driver->resume(policy)) + pr_err("%s: Failed to resume driver: %p\n", __func__, + policy); + else if (__cpufreq_governor(policy, CPUFREQ_GOV_START) + || __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS)) + pr_err("%s: Failed to start governor for policy: %p\n", + __func__, policy); + } + + /* + * schedule call cpufreq_update_policy() for first-online CPU, as that + * wouldn't be hotplugged-out on suspend. It will verify that the + * current freq is in sync with what we believe it to be. + */ + policy = cpufreq_cpu_get_raw(cpumask_first(cpu_online_mask)); + if (WARN_ON(!policy)) + return; + + schedule_work(&policy->update); +} + +/** + * cpufreq_get_current_driver - return current driver's name + * + * Return the name string of the currently loaded cpufreq driver + * or NULL, if none. + */ +const char *cpufreq_get_current_driver(void) +{ + if (cpufreq_driver) + return cpufreq_driver->name; + + return NULL; +} +EXPORT_SYMBOL_GPL(cpufreq_get_current_driver); + +/** + * cpufreq_get_driver_data - return current driver data + * + * Return the private data of the currently loaded cpufreq + * driver, or NULL if no cpufreq driver is loaded. + */ +void *cpufreq_get_driver_data(void) +{ + if (cpufreq_driver) + return cpufreq_driver->driver_data; + + return NULL; +} +EXPORT_SYMBOL_GPL(cpufreq_get_driver_data); + +/********************************************************************* + * NOTIFIER LISTS INTERFACE * + *********************************************************************/ + +/** + * cpufreq_register_notifier - register a driver with cpufreq + * @nb: notifier function to register + * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER + * + * Add a driver to one of two lists: either a list of drivers that + * are notified about clock rate changes (once before and once after + * the transition), or a list of drivers that are notified about + * changes in cpufreq policy. + * + * This function may sleep, and has the same return conditions as + * blocking_notifier_chain_register. + */ +int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) +{ + int ret; + + if (cpufreq_disabled()) + return -EINVAL; + + WARN_ON(!init_cpufreq_transition_notifier_list_called); + + switch (list) { + case CPUFREQ_TRANSITION_NOTIFIER: + ret = srcu_notifier_chain_register( + &cpufreq_transition_notifier_list, nb); + break; + case CPUFREQ_POLICY_NOTIFIER: + ret = blocking_notifier_chain_register( + &cpufreq_policy_notifier_list, nb); + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL(cpufreq_register_notifier); + +/** + * cpufreq_unregister_notifier - unregister a driver with cpufreq + * @nb: notifier block to be unregistered + * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER + * + * Remove a driver from the CPU frequency notifier list. + * + * This function may sleep, and has the same return conditions as + * blocking_notifier_chain_unregister. + */ +int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list) +{ + int ret; + + if (cpufreq_disabled()) + return -EINVAL; + + switch (list) { + case CPUFREQ_TRANSITION_NOTIFIER: + ret = srcu_notifier_chain_unregister( + &cpufreq_transition_notifier_list, nb); + break; + case CPUFREQ_POLICY_NOTIFIER: + ret = blocking_notifier_chain_unregister( + &cpufreq_policy_notifier_list, nb); + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL(cpufreq_unregister_notifier); + + +/********************************************************************* + * GOVERNORS * + *********************************************************************/ + +/* Must set freqs->new to intermediate frequency */ +static int __target_intermediate(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, int index) +{ + int ret; + + freqs->new = cpufreq_driver->get_intermediate(policy, index); + + /* We don't need to switch to intermediate freq */ + if (!freqs->new) + return 0; + + pr_debug("%s: cpu: %d, switching to intermediate freq: oldfreq: %u, intermediate freq: %u\n", + __func__, policy->cpu, freqs->old, freqs->new); + + cpufreq_freq_transition_begin(policy, freqs); + ret = cpufreq_driver->target_intermediate(policy, index); + cpufreq_freq_transition_end(policy, freqs, ret); + + if (ret) + pr_err("%s: Failed to change to intermediate frequency: %d\n", + __func__, ret); + + return ret; +} + +static int __target_index(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *freq_table, int index) +{ + struct cpufreq_freqs freqs = {.old = policy->cur, .flags = 0}; + unsigned int intermediate_freq = 0; + int retval = -EINVAL; + bool notify; + + notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION); + if (notify) { + /* Handle switching to intermediate frequency */ + if (cpufreq_driver->get_intermediate) { + retval = __target_intermediate(policy, &freqs, index); + if (retval) + return retval; + + intermediate_freq = freqs.new; + /* Set old freq to intermediate */ + if (intermediate_freq) + freqs.old = freqs.new; + } + + freqs.new = freq_table[index].frequency; + pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n", + __func__, policy->cpu, freqs.old, freqs.new); + + cpufreq_freq_transition_begin(policy, &freqs); + } + + retval = cpufreq_driver->target_index(policy, index); + if (retval) + pr_err("%s: Failed to change cpu frequency: %d\n", __func__, + retval); + + if (notify) { + cpufreq_freq_transition_end(policy, &freqs, retval); + + /* + * Failed after setting to intermediate freq? Driver should have + * reverted back to initial frequency and so should we. Check + * here for intermediate_freq instead of get_intermediate, in + * case we have't switched to intermediate freq at all. + */ + if (unlikely(retval && intermediate_freq)) { + freqs.old = intermediate_freq; + freqs.new = policy->restore_freq; + cpufreq_freq_transition_begin(policy, &freqs); + cpufreq_freq_transition_end(policy, &freqs, 0); + } + } + + return retval; +} + +int __cpufreq_driver_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int old_target_freq = target_freq; + int retval = -EINVAL; + + if (cpufreq_disabled()) + return -ENODEV; + + /* Make sure that target_freq is within supported range */ + if (target_freq > policy->max) + target_freq = policy->max; + if (target_freq < policy->min) + target_freq = policy->min; + + pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n", + policy->cpu, target_freq, relation, old_target_freq); + + /* + * This might look like a redundant call as we are checking it again + * after finding index. But it is left intentionally for cases where + * exactly same freq is called again and so we can save on few function + * calls. + */ + if (target_freq == policy->cur) + return 0; + + /* Save last value to restore later on errors */ + policy->restore_freq = policy->cur; + + if (cpufreq_driver->target) + retval = cpufreq_driver->target(policy, target_freq, relation); + else if (cpufreq_driver->target_index) { + struct cpufreq_frequency_table *freq_table; + int index; + + freq_table = cpufreq_frequency_get_table(policy->cpu); + if (unlikely(!freq_table)) { + pr_err("%s: Unable to find freq_table\n", __func__); + goto out; + } + + retval = cpufreq_frequency_table_target(policy, freq_table, + target_freq, relation, &index); + if (unlikely(retval)) { + pr_err("%s: Unable to find matching freq\n", __func__); + goto out; + } + + if (freq_table[index].frequency == policy->cur) { + retval = 0; + goto out; + } + + retval = __target_index(policy, freq_table, index); + } + +out: + return retval; +} +EXPORT_SYMBOL_GPL(__cpufreq_driver_target); + +int cpufreq_driver_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + int ret = -EINVAL; + + down_write(&policy->rwsem); + + ret = __cpufreq_driver_target(policy, target_freq, relation); + + up_write(&policy->rwsem); + + return ret; +} +EXPORT_SYMBOL_GPL(cpufreq_driver_target); + +static int __cpufreq_governor(struct cpufreq_policy *policy, + unsigned int event) +{ + int ret; + + /* Only must be defined when default governor is known to have latency + restrictions, like e.g. conservative or ondemand. + That this is the case is already ensured in Kconfig + */ +#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE + struct cpufreq_governor *gov = &cpufreq_gov_performance; +#else + struct cpufreq_governor *gov = NULL; +#endif + + /* Don't start any governor operations if we are entering suspend */ + if (cpufreq_suspended) + return 0; + /* + * Governor might not be initiated here if ACPI _PPC changed + * notification happened, so check it. + */ + if (!policy->governor) + return -EINVAL; + + if (policy->governor->max_transition_latency && + policy->cpuinfo.transition_latency > + policy->governor->max_transition_latency) { + if (!gov) + return -EINVAL; + else { + pr_warn("%s governor failed, too long transition latency of HW, fallback to %s governor\n", + policy->governor->name, gov->name); + policy->governor = gov; + } + } + + if (event == CPUFREQ_GOV_POLICY_INIT) + if (!try_module_get(policy->governor->owner)) + return -EINVAL; + + pr_debug("__cpufreq_governor for CPU %u, event %u\n", + policy->cpu, event); + + mutex_lock(&cpufreq_governor_lock); + if ((policy->governor_enabled && event == CPUFREQ_GOV_START) + || (!policy->governor_enabled + && (event == CPUFREQ_GOV_LIMITS || event == CPUFREQ_GOV_STOP))) { + mutex_unlock(&cpufreq_governor_lock); + return -EBUSY; + } + + if (event == CPUFREQ_GOV_STOP) + policy->governor_enabled = false; + else if (event == CPUFREQ_GOV_START) + policy->governor_enabled = true; + + mutex_unlock(&cpufreq_governor_lock); + + ret = policy->governor->governor(policy, event); + + if (!ret) { + if (event == CPUFREQ_GOV_POLICY_INIT) + policy->governor->initialized++; + else if (event == CPUFREQ_GOV_POLICY_EXIT) + policy->governor->initialized--; + } else { + /* Restore original values */ + mutex_lock(&cpufreq_governor_lock); + if (event == CPUFREQ_GOV_STOP) + policy->governor_enabled = true; + else if (event == CPUFREQ_GOV_START) + policy->governor_enabled = false; + mutex_unlock(&cpufreq_governor_lock); + } + + if (((event == CPUFREQ_GOV_POLICY_INIT) && ret) || + ((event == CPUFREQ_GOV_POLICY_EXIT) && !ret)) + module_put(policy->governor->owner); + + return ret; +} + +int cpufreq_register_governor(struct cpufreq_governor *governor) +{ + int err; + + if (!governor) + return -EINVAL; + + if (cpufreq_disabled()) + return -ENODEV; + + mutex_lock(&cpufreq_governor_mutex); + + governor->initialized = 0; + err = -EBUSY; + if (!find_governor(governor->name)) { + err = 0; + list_add(&governor->governor_list, &cpufreq_governor_list); + } + + mutex_unlock(&cpufreq_governor_mutex); + return err; +} +EXPORT_SYMBOL_GPL(cpufreq_register_governor); + +void cpufreq_unregister_governor(struct cpufreq_governor *governor) +{ + int cpu; + + if (!governor) + return; + + if (cpufreq_disabled()) + return; + + for_each_present_cpu(cpu) { + if (cpu_online(cpu)) + continue; + if (!strcmp(per_cpu(cpufreq_cpu_governor, cpu), governor->name)) + strcpy(per_cpu(cpufreq_cpu_governor, cpu), "\0"); + } + + mutex_lock(&cpufreq_governor_mutex); + list_del(&governor->governor_list); + mutex_unlock(&cpufreq_governor_mutex); + return; +} +EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); + + +/********************************************************************* + * POLICY INTERFACE * + *********************************************************************/ + +/** + * cpufreq_get_policy - get the current cpufreq_policy + * @policy: struct cpufreq_policy into which the current cpufreq_policy + * is written + * + * Reads the current cpufreq policy. + */ +int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) +{ + struct cpufreq_policy *cpu_policy; + if (!policy) + return -EINVAL; + + cpu_policy = cpufreq_cpu_get(cpu); + if (!cpu_policy) + return -EINVAL; + + memcpy(policy, cpu_policy, sizeof(*policy)); + + cpufreq_cpu_put(cpu_policy); + return 0; +} +EXPORT_SYMBOL(cpufreq_get_policy); + +/* + * policy : current policy. + * new_policy: policy to be set. + */ +static int cpufreq_set_policy(struct cpufreq_policy *policy, + struct cpufreq_policy *new_policy) +{ + struct cpufreq_governor *old_gov; + int ret; + + pr_debug("setting new policy for CPU %u: %u - %u kHz\n", + new_policy->cpu, new_policy->min, new_policy->max); + + memcpy(&new_policy->cpuinfo, &policy->cpuinfo, sizeof(policy->cpuinfo)); + + if (new_policy->min > policy->max || new_policy->max < policy->min) + return -EINVAL; + + /* verify the cpu speed can be set within this limit */ + ret = cpufreq_driver->verify(new_policy); + if (ret) + return ret; + + /* adjust if necessary - all reasons */ + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_ADJUST, new_policy); + + /* adjust if necessary - hardware incompatibility*/ + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_INCOMPATIBLE, new_policy); + + /* + * verify the cpu speed can be set within this limit, which might be + * different to the first one + */ + ret = cpufreq_driver->verify(new_policy); + if (ret) + return ret; + + /* notification of the new policy */ + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_NOTIFY, new_policy); + + policy->min = new_policy->min; + policy->max = new_policy->max; + + pr_debug("new min and max freqs are %u - %u kHz\n", + policy->min, policy->max); + + if (cpufreq_driver->setpolicy) { + policy->policy = new_policy->policy; + pr_debug("setting range\n"); + return cpufreq_driver->setpolicy(new_policy); + } + + if (new_policy->governor == policy->governor) + goto out; + + pr_debug("governor switch\n"); + + /* save old, working values */ + old_gov = policy->governor; + /* end old governor */ + if (old_gov) { + __cpufreq_governor(policy, CPUFREQ_GOV_STOP); + up_write(&policy->rwsem); + __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); + down_write(&policy->rwsem); + } + + /* start new governor */ + policy->governor = new_policy->governor; + if (!__cpufreq_governor(policy, CPUFREQ_GOV_POLICY_INIT)) { + if (!__cpufreq_governor(policy, CPUFREQ_GOV_START)) + goto out; + + up_write(&policy->rwsem); + __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); + down_write(&policy->rwsem); + } + + /* new governor failed, so re-start old one */ + pr_debug("starting governor %s failed\n", policy->governor->name); + if (old_gov) { + policy->governor = old_gov; + __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_INIT); + __cpufreq_governor(policy, CPUFREQ_GOV_START); + } + + return -EINVAL; + + out: + pr_debug("governor: change or update limits\n"); + return __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS); +} + +/** + * cpufreq_update_policy - re-evaluate an existing cpufreq policy + * @cpu: CPU which shall be re-evaluated + * + * Useful for policy notifiers which have different necessities + * at different times. + */ +int cpufreq_update_policy(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct cpufreq_policy new_policy; + int ret; + + if (!policy) + return -ENODEV; + + down_write(&policy->rwsem); + + pr_debug("updating policy for CPU %u\n", cpu); + memcpy(&new_policy, policy, sizeof(*policy)); + new_policy.min = policy->user_policy.min; + new_policy.max = policy->user_policy.max; + new_policy.policy = policy->user_policy.policy; + new_policy.governor = policy->user_policy.governor; + + /* + * BIOS might change freq behind our back + * -> ask driver for current freq and notify governors about a change + */ + if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { + new_policy.cur = cpufreq_driver->get(cpu); + if (WARN_ON(!new_policy.cur)) { + ret = -EIO; + goto unlock; + } + + if (!policy->cur) { + pr_debug("Driver did not initialize current freq\n"); + policy->cur = new_policy.cur; + } else { + if (policy->cur != new_policy.cur && has_target()) + cpufreq_out_of_sync(policy, new_policy.cur); + } + } + + ret = cpufreq_set_policy(policy, &new_policy); + +unlock: + up_write(&policy->rwsem); + + cpufreq_cpu_put(policy); + return ret; +} +EXPORT_SYMBOL(cpufreq_update_policy); + +static int cpufreq_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct device *dev; + + dev = get_cpu_device(cpu); + if (dev) { + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_ONLINE: + __cpufreq_add_dev(dev, NULL); + break; + + case CPU_DOWN_PREPARE: + __cpufreq_remove_dev_prepare(dev, NULL); + break; + + case CPU_POST_DEAD: + __cpufreq_remove_dev_finish(dev, NULL); + break; + + case CPU_DOWN_FAILED: + __cpufreq_add_dev(dev, NULL); + break; + } + } + return NOTIFY_OK; +} + +static struct notifier_block __refdata cpufreq_cpu_notifier = { + .notifier_call = cpufreq_cpu_callback, +}; + +/********************************************************************* + * BOOST * + *********************************************************************/ +static int cpufreq_boost_set_sw(int state) +{ + struct cpufreq_frequency_table *freq_table; + struct cpufreq_policy *policy; + int ret = -EINVAL; + + for_each_policy(policy) { + freq_table = cpufreq_frequency_get_table(policy->cpu); + if (freq_table) { + ret = cpufreq_frequency_table_cpuinfo(policy, + freq_table); + if (ret) { + pr_err("%s: Policy frequency update failed\n", + __func__); + break; + } + policy->user_policy.max = policy->max; + __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS); + } + } + + return ret; +} + +int cpufreq_boost_trigger_state(int state) +{ + unsigned long flags; + int ret = 0; + + if (cpufreq_driver->boost_enabled == state) + return 0; + + write_lock_irqsave(&cpufreq_driver_lock, flags); + cpufreq_driver->boost_enabled = state; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + ret = cpufreq_driver->set_boost(state); + if (ret) { + write_lock_irqsave(&cpufreq_driver_lock, flags); + cpufreq_driver->boost_enabled = !state; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + pr_err("%s: Cannot %s BOOST\n", + __func__, state ? "enable" : "disable"); + } + + return ret; +} + +int cpufreq_boost_supported(void) +{ + if (likely(cpufreq_driver)) + return cpufreq_driver->boost_supported; + + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_boost_supported); + +int cpufreq_boost_enabled(void) +{ + return cpufreq_driver->boost_enabled; +} +EXPORT_SYMBOL_GPL(cpufreq_boost_enabled); + +/********************************************************************* + * REGISTER / UNREGISTER CPUFREQ DRIVER * + *********************************************************************/ + +/** + * cpufreq_register_driver - register a CPU Frequency driver + * @driver_data: A struct cpufreq_driver containing the values# + * submitted by the CPU Frequency driver. + * + * Registers a CPU Frequency driver to this core code. This code + * returns zero on success, -EBUSY when another driver got here first + * (and isn't unregistered in the meantime). + * + */ +int cpufreq_register_driver(struct cpufreq_driver *driver_data) +{ + unsigned long flags; + int ret; + + if (cpufreq_disabled()) + return -ENODEV; + + if (!driver_data || !driver_data->verify || !driver_data->init || + !(driver_data->setpolicy || driver_data->target_index || + driver_data->target) || + (driver_data->setpolicy && (driver_data->target_index || + driver_data->target)) || + (!!driver_data->get_intermediate != !!driver_data->target_intermediate)) + return -EINVAL; + + pr_debug("trying to register driver %s\n", driver_data->name); + + write_lock_irqsave(&cpufreq_driver_lock, flags); + if (cpufreq_driver) { + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + return -EEXIST; + } + cpufreq_driver = driver_data; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + if (driver_data->setpolicy) + driver_data->flags |= CPUFREQ_CONST_LOOPS; + + if (cpufreq_boost_supported()) { + /* + * Check if driver provides function to enable boost - + * if not, use cpufreq_boost_set_sw as default + */ + if (!cpufreq_driver->set_boost) + cpufreq_driver->set_boost = cpufreq_boost_set_sw; + + ret = cpufreq_sysfs_create_file(&boost.attr); + if (ret) { + pr_err("%s: cannot register global BOOST sysfs file\n", + __func__); + goto err_null_driver; + } + } + + ret = subsys_interface_register(&cpufreq_interface); + if (ret) + goto err_boost_unreg; + + if (!(cpufreq_driver->flags & CPUFREQ_STICKY) && + list_empty(&cpufreq_policy_list)) { + /* if all ->init() calls failed, unregister */ + pr_debug("%s: No CPU initialized for driver %s\n", __func__, + driver_data->name); + goto err_if_unreg; + } + + register_hotcpu_notifier(&cpufreq_cpu_notifier); + pr_debug("driver %s up and running\n", driver_data->name); + + return 0; +err_if_unreg: + subsys_interface_unregister(&cpufreq_interface); +err_boost_unreg: + if (cpufreq_boost_supported()) + cpufreq_sysfs_remove_file(&boost.attr); +err_null_driver: + write_lock_irqsave(&cpufreq_driver_lock, flags); + cpufreq_driver = NULL; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(cpufreq_register_driver); + +/** + * cpufreq_unregister_driver - unregister the current CPUFreq driver + * + * Unregister the current CPUFreq driver. Only call this if you have + * the right to do so, i.e. if you have succeeded in initialising before! + * Returns zero if successful, and -EINVAL if the cpufreq_driver is + * currently not initialised. + */ +int cpufreq_unregister_driver(struct cpufreq_driver *driver) +{ + unsigned long flags; + + if (!cpufreq_driver || (driver != cpufreq_driver)) + return -EINVAL; + + pr_debug("unregistering driver %s\n", driver->name); + + /* Protect against concurrent cpu hotplug */ + get_online_cpus(); + subsys_interface_unregister(&cpufreq_interface); + if (cpufreq_boost_supported()) + cpufreq_sysfs_remove_file(&boost.attr); + + unregister_hotcpu_notifier(&cpufreq_cpu_notifier); + + write_lock_irqsave(&cpufreq_driver_lock, flags); + + cpufreq_driver = NULL; + + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + put_online_cpus(); + + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_unregister_driver); + +/* + * Stop cpufreq at shutdown to make sure it isn't holding any locks + * or mutexes when secondary CPUs are halted. + */ +static struct syscore_ops cpufreq_syscore_ops = { + .shutdown = cpufreq_suspend, +}; + +static int __init cpufreq_core_init(void) +{ + if (cpufreq_disabled()) + return -ENODEV; + + cpufreq_global_kobject = kobject_create(); + BUG_ON(!cpufreq_global_kobject); + + register_syscore_ops(&cpufreq_syscore_ops); + + return 0; +} +core_initcall(cpufreq_core_init); diff --git a/kernel/drivers/cpufreq/cpufreq_conservative.c b/kernel/drivers/cpufreq/cpufreq_conservative.c new file mode 100644 index 000000000..25a70d06c --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_conservative.c @@ -0,0 +1,408 @@ +/* + * drivers/cpufreq/cpufreq_conservative.c + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * Jun Nakajima <jun.nakajima@intel.com> + * (C) 2009 Alexander Clouter <alex@digriz.org.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/slab.h> +#include "cpufreq_governor.h" + +/* Conservative governor macros */ +#define DEF_FREQUENCY_UP_THRESHOLD (80) +#define DEF_FREQUENCY_DOWN_THRESHOLD (20) +#define DEF_FREQUENCY_STEP (5) +#define DEF_SAMPLING_DOWN_FACTOR (1) +#define MAX_SAMPLING_DOWN_FACTOR (10) + +static DEFINE_PER_CPU(struct cs_cpu_dbs_info_s, cs_cpu_dbs_info); + +static inline unsigned int get_freq_target(struct cs_dbs_tuners *cs_tuners, + struct cpufreq_policy *policy) +{ + unsigned int freq_target = (cs_tuners->freq_step * policy->max) / 100; + + /* max freq cannot be less than 100. But who knows... */ + if (unlikely(freq_target == 0)) + freq_target = DEF_FREQUENCY_STEP; + + return freq_target; +} + +/* + * Every sampling_rate, we check, if current idle time is less than 20% + * (default), then we try to increase frequency. Every sampling_rate * + * sampling_down_factor, we check, if current idle time is more than 80% + * (default), then we try to decrease frequency + * + * Any frequency increase takes it to the maximum frequency. Frequency reduction + * happens at minimum steps of 5% (default) of maximum frequency + */ +static void cs_check_cpu(int cpu, unsigned int load) +{ + struct cs_cpu_dbs_info_s *dbs_info = &per_cpu(cs_cpu_dbs_info, cpu); + struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy; + struct dbs_data *dbs_data = policy->governor_data; + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + + /* + * break out if we 'cannot' reduce the speed as the user might + * want freq_step to be zero + */ + if (cs_tuners->freq_step == 0) + return; + + /* Check for frequency increase */ + if (load > cs_tuners->up_threshold) { + dbs_info->down_skip = 0; + + /* if we are already at full speed then break out early */ + if (dbs_info->requested_freq == policy->max) + return; + + dbs_info->requested_freq += get_freq_target(cs_tuners, policy); + + if (dbs_info->requested_freq > policy->max) + dbs_info->requested_freq = policy->max; + + __cpufreq_driver_target(policy, dbs_info->requested_freq, + CPUFREQ_RELATION_H); + return; + } + + /* if sampling_down_factor is active break out early */ + if (++dbs_info->down_skip < cs_tuners->sampling_down_factor) + return; + dbs_info->down_skip = 0; + + /* Check for frequency decrease */ + if (load < cs_tuners->down_threshold) { + unsigned int freq_target; + /* + * if we cannot reduce the frequency anymore, break out early + */ + if (policy->cur == policy->min) + return; + + freq_target = get_freq_target(cs_tuners, policy); + if (dbs_info->requested_freq > freq_target) + dbs_info->requested_freq -= freq_target; + else + dbs_info->requested_freq = policy->min; + + __cpufreq_driver_target(policy, dbs_info->requested_freq, + CPUFREQ_RELATION_L); + return; + } +} + +static void cs_dbs_timer(struct work_struct *work) +{ + struct cs_cpu_dbs_info_s *dbs_info = container_of(work, + struct cs_cpu_dbs_info_s, cdbs.work.work); + unsigned int cpu = dbs_info->cdbs.cur_policy->cpu; + struct cs_cpu_dbs_info_s *core_dbs_info = &per_cpu(cs_cpu_dbs_info, + cpu); + struct dbs_data *dbs_data = dbs_info->cdbs.cur_policy->governor_data; + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + int delay = delay_for_sampling_rate(cs_tuners->sampling_rate); + bool modify_all = true; + + mutex_lock(&core_dbs_info->cdbs.timer_mutex); + if (!need_load_eval(&core_dbs_info->cdbs, cs_tuners->sampling_rate)) + modify_all = false; + else + dbs_check_cpu(dbs_data, cpu); + + gov_queue_work(dbs_data, dbs_info->cdbs.cur_policy, delay, modify_all); + mutex_unlock(&core_dbs_info->cdbs.timer_mutex); +} + +static int dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct cpufreq_freqs *freq = data; + struct cs_cpu_dbs_info_s *dbs_info = + &per_cpu(cs_cpu_dbs_info, freq->cpu); + struct cpufreq_policy *policy; + + if (!dbs_info->enable) + return 0; + + policy = dbs_info->cdbs.cur_policy; + + /* + * we only care if our internally tracked freq moves outside the 'valid' + * ranges of frequency available to us otherwise we do not change it + */ + if (dbs_info->requested_freq > policy->max + || dbs_info->requested_freq < policy->min) + dbs_info->requested_freq = freq->new; + + return 0; +} + +/************************** sysfs interface ************************/ +static struct common_dbs_data cs_dbs_cdata; + +static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data, + const char *buf, size_t count) +{ + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) + return -EINVAL; + + cs_tuners->sampling_down_factor = input; + return count; +} + +static ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf, + size_t count) +{ + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1) + return -EINVAL; + + cs_tuners->sampling_rate = max(input, dbs_data->min_sampling_rate); + return count; +} + +static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf, + size_t count) +{ + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > 100 || input <= cs_tuners->down_threshold) + return -EINVAL; + + cs_tuners->up_threshold = input; + return count; +} + +static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf, + size_t count) +{ + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + /* cannot be lower than 11 otherwise freq will not fall */ + if (ret != 1 || input < 11 || input > 100 || + input >= cs_tuners->up_threshold) + return -EINVAL; + + cs_tuners->down_threshold = input; + return count; +} + +static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data, + const char *buf, size_t count) +{ + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input, j; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + if (input > 1) + input = 1; + + if (input == cs_tuners->ignore_nice_load) /* nothing to do */ + return count; + + cs_tuners->ignore_nice_load = input; + + /* we need to re-evaluate prev_cpu_idle */ + for_each_online_cpu(j) { + struct cs_cpu_dbs_info_s *dbs_info; + dbs_info = &per_cpu(cs_cpu_dbs_info, j); + dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j, + &dbs_info->cdbs.prev_cpu_wall, 0); + if (cs_tuners->ignore_nice_load) + dbs_info->cdbs.prev_cpu_nice = + kcpustat_cpu(j).cpustat[CPUTIME_NICE]; + } + return count; +} + +static ssize_t store_freq_step(struct dbs_data *dbs_data, const char *buf, + size_t count) +{ + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1) + return -EINVAL; + + if (input > 100) + input = 100; + + /* + * no need to test here if freq_step is zero as the user might actually + * want this, they would be crazy though :) + */ + cs_tuners->freq_step = input; + return count; +} + +show_store_one(cs, sampling_rate); +show_store_one(cs, sampling_down_factor); +show_store_one(cs, up_threshold); +show_store_one(cs, down_threshold); +show_store_one(cs, ignore_nice_load); +show_store_one(cs, freq_step); +declare_show_sampling_rate_min(cs); + +gov_sys_pol_attr_rw(sampling_rate); +gov_sys_pol_attr_rw(sampling_down_factor); +gov_sys_pol_attr_rw(up_threshold); +gov_sys_pol_attr_rw(down_threshold); +gov_sys_pol_attr_rw(ignore_nice_load); +gov_sys_pol_attr_rw(freq_step); +gov_sys_pol_attr_ro(sampling_rate_min); + +static struct attribute *dbs_attributes_gov_sys[] = { + &sampling_rate_min_gov_sys.attr, + &sampling_rate_gov_sys.attr, + &sampling_down_factor_gov_sys.attr, + &up_threshold_gov_sys.attr, + &down_threshold_gov_sys.attr, + &ignore_nice_load_gov_sys.attr, + &freq_step_gov_sys.attr, + NULL +}; + +static struct attribute_group cs_attr_group_gov_sys = { + .attrs = dbs_attributes_gov_sys, + .name = "conservative", +}; + +static struct attribute *dbs_attributes_gov_pol[] = { + &sampling_rate_min_gov_pol.attr, + &sampling_rate_gov_pol.attr, + &sampling_down_factor_gov_pol.attr, + &up_threshold_gov_pol.attr, + &down_threshold_gov_pol.attr, + &ignore_nice_load_gov_pol.attr, + &freq_step_gov_pol.attr, + NULL +}; + +static struct attribute_group cs_attr_group_gov_pol = { + .attrs = dbs_attributes_gov_pol, + .name = "conservative", +}; + +/************************** sysfs end ************************/ + +static int cs_init(struct dbs_data *dbs_data) +{ + struct cs_dbs_tuners *tuners; + + tuners = kzalloc(sizeof(*tuners), GFP_KERNEL); + if (!tuners) { + pr_err("%s: kzalloc failed\n", __func__); + return -ENOMEM; + } + + tuners->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; + tuners->down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD; + tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; + tuners->ignore_nice_load = 0; + tuners->freq_step = DEF_FREQUENCY_STEP; + + dbs_data->tuners = tuners; + dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO * + jiffies_to_usecs(10); + mutex_init(&dbs_data->mutex); + return 0; +} + +static void cs_exit(struct dbs_data *dbs_data) +{ + kfree(dbs_data->tuners); +} + +define_get_cpu_dbs_routines(cs_cpu_dbs_info); + +static struct notifier_block cs_cpufreq_notifier_block = { + .notifier_call = dbs_cpufreq_notifier, +}; + +static struct cs_ops cs_ops = { + .notifier_block = &cs_cpufreq_notifier_block, +}; + +static struct common_dbs_data cs_dbs_cdata = { + .governor = GOV_CONSERVATIVE, + .attr_group_gov_sys = &cs_attr_group_gov_sys, + .attr_group_gov_pol = &cs_attr_group_gov_pol, + .get_cpu_cdbs = get_cpu_cdbs, + .get_cpu_dbs_info_s = get_cpu_dbs_info_s, + .gov_dbs_timer = cs_dbs_timer, + .gov_check_cpu = cs_check_cpu, + .gov_ops = &cs_ops, + .init = cs_init, + .exit = cs_exit, +}; + +static int cs_cpufreq_governor_dbs(struct cpufreq_policy *policy, + unsigned int event) +{ + return cpufreq_governor_dbs(policy, &cs_dbs_cdata, event); +} + +#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE +static +#endif +struct cpufreq_governor cpufreq_gov_conservative = { + .name = "conservative", + .governor = cs_cpufreq_governor_dbs, + .max_transition_latency = TRANSITION_LATENCY_LIMIT, + .owner = THIS_MODULE, +}; + +static int __init cpufreq_gov_dbs_init(void) +{ + return cpufreq_register_governor(&cpufreq_gov_conservative); +} + +static void __exit cpufreq_gov_dbs_exit(void) +{ + cpufreq_unregister_governor(&cpufreq_gov_conservative); +} + +MODULE_AUTHOR("Alexander Clouter <alex@digriz.org.uk>"); +MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for " + "Low Latency Frequency Transition capable processors " + "optimised for use in a battery environment"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE +fs_initcall(cpufreq_gov_dbs_init); +#else +module_init(cpufreq_gov_dbs_init); +#endif +module_exit(cpufreq_gov_dbs_exit); diff --git a/kernel/drivers/cpufreq/cpufreq_governor.c b/kernel/drivers/cpufreq/cpufreq_governor.c new file mode 100644 index 000000000..1b44496b2 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_governor.c @@ -0,0 +1,449 @@ +/* + * drivers/cpufreq/cpufreq_governor.c + * + * CPUFREQ governors common code + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * (C) 2003 Jun Nakajima <jun.nakajima@intel.com> + * (C) 2009 Alexander Clouter <alex@digriz.org.uk> + * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/export.h> +#include <linux/kernel_stat.h> +#include <linux/slab.h> + +#include "cpufreq_governor.h" + +static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data) +{ + if (have_governor_per_policy()) + return dbs_data->cdata->attr_group_gov_pol; + else + return dbs_data->cdata->attr_group_gov_sys; +} + +void dbs_check_cpu(struct dbs_data *dbs_data, int cpu) +{ + struct cpu_dbs_common_info *cdbs = dbs_data->cdata->get_cpu_cdbs(cpu); + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + struct cpufreq_policy *policy; + unsigned int sampling_rate; + unsigned int max_load = 0; + unsigned int ignore_nice; + unsigned int j; + + if (dbs_data->cdata->governor == GOV_ONDEMAND) { + struct od_cpu_dbs_info_s *od_dbs_info = + dbs_data->cdata->get_cpu_dbs_info_s(cpu); + + /* + * Sometimes, the ondemand governor uses an additional + * multiplier to give long delays. So apply this multiplier to + * the 'sampling_rate', so as to keep the wake-up-from-idle + * detection logic a bit conservative. + */ + sampling_rate = od_tuners->sampling_rate; + sampling_rate *= od_dbs_info->rate_mult; + + ignore_nice = od_tuners->ignore_nice_load; + } else { + sampling_rate = cs_tuners->sampling_rate; + ignore_nice = cs_tuners->ignore_nice_load; + } + + policy = cdbs->cur_policy; + + /* Get Absolute Load */ + for_each_cpu(j, policy->cpus) { + struct cpu_dbs_common_info *j_cdbs; + u64 cur_wall_time, cur_idle_time; + unsigned int idle_time, wall_time; + unsigned int load; + int io_busy = 0; + + j_cdbs = dbs_data->cdata->get_cpu_cdbs(j); + + /* + * For the purpose of ondemand, waiting for disk IO is + * an indication that you're performance critical, and + * not that the system is actually idle. So do not add + * the iowait time to the cpu idle time. + */ + if (dbs_data->cdata->governor == GOV_ONDEMAND) + io_busy = od_tuners->io_is_busy; + cur_idle_time = get_cpu_idle_time(j, &cur_wall_time, io_busy); + + wall_time = (unsigned int) + (cur_wall_time - j_cdbs->prev_cpu_wall); + j_cdbs->prev_cpu_wall = cur_wall_time; + + idle_time = (unsigned int) + (cur_idle_time - j_cdbs->prev_cpu_idle); + j_cdbs->prev_cpu_idle = cur_idle_time; + + if (ignore_nice) { + u64 cur_nice; + unsigned long cur_nice_jiffies; + + cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] - + cdbs->prev_cpu_nice; + /* + * Assumption: nice time between sampling periods will + * be less than 2^32 jiffies for 32 bit sys + */ + cur_nice_jiffies = (unsigned long) + cputime64_to_jiffies64(cur_nice); + + cdbs->prev_cpu_nice = + kcpustat_cpu(j).cpustat[CPUTIME_NICE]; + idle_time += jiffies_to_usecs(cur_nice_jiffies); + } + + if (unlikely(!wall_time || wall_time < idle_time)) + continue; + + /* + * If the CPU had gone completely idle, and a task just woke up + * on this CPU now, it would be unfair to calculate 'load' the + * usual way for this elapsed time-window, because it will show + * near-zero load, irrespective of how CPU intensive that task + * actually is. This is undesirable for latency-sensitive bursty + * workloads. + * + * To avoid this, we reuse the 'load' from the previous + * time-window and give this task a chance to start with a + * reasonably high CPU frequency. (However, we shouldn't over-do + * this copy, lest we get stuck at a high load (high frequency) + * for too long, even when the current system load has actually + * dropped down. So we perform the copy only once, upon the + * first wake-up from idle.) + * + * Detecting this situation is easy: the governor's deferrable + * timer would not have fired during CPU-idle periods. Hence + * an unusually large 'wall_time' (as compared to the sampling + * rate) indicates this scenario. + * + * prev_load can be zero in two cases and we must recalculate it + * for both cases: + * - during long idle intervals + * - explicitly set to zero + */ + if (unlikely(wall_time > (2 * sampling_rate) && + j_cdbs->prev_load)) { + load = j_cdbs->prev_load; + + /* + * Perform a destructive copy, to ensure that we copy + * the previous load only once, upon the first wake-up + * from idle. + */ + j_cdbs->prev_load = 0; + } else { + load = 100 * (wall_time - idle_time) / wall_time; + j_cdbs->prev_load = load; + } + + if (load > max_load) + max_load = load; + } + + dbs_data->cdata->gov_check_cpu(cpu, max_load); +} +EXPORT_SYMBOL_GPL(dbs_check_cpu); + +static inline void __gov_queue_work(int cpu, struct dbs_data *dbs_data, + unsigned int delay) +{ + struct cpu_dbs_common_info *cdbs = dbs_data->cdata->get_cpu_cdbs(cpu); + + mod_delayed_work_on(cpu, system_wq, &cdbs->work, delay); +} + +void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy, + unsigned int delay, bool all_cpus) +{ + int i; + + mutex_lock(&cpufreq_governor_lock); + if (!policy->governor_enabled) + goto out_unlock; + + if (!all_cpus) { + /* + * Use raw_smp_processor_id() to avoid preemptible warnings. + * We know that this is only called with all_cpus == false from + * works that have been queued with *_work_on() functions and + * those works are canceled during CPU_DOWN_PREPARE so they + * can't possibly run on any other CPU. + */ + __gov_queue_work(raw_smp_processor_id(), dbs_data, delay); + } else { + for_each_cpu(i, policy->cpus) + __gov_queue_work(i, dbs_data, delay); + } + +out_unlock: + mutex_unlock(&cpufreq_governor_lock); +} +EXPORT_SYMBOL_GPL(gov_queue_work); + +static inline void gov_cancel_work(struct dbs_data *dbs_data, + struct cpufreq_policy *policy) +{ + struct cpu_dbs_common_info *cdbs; + int i; + + for_each_cpu(i, policy->cpus) { + cdbs = dbs_data->cdata->get_cpu_cdbs(i); + cancel_delayed_work_sync(&cdbs->work); + } +} + +/* Will return if we need to evaluate cpu load again or not */ +bool need_load_eval(struct cpu_dbs_common_info *cdbs, + unsigned int sampling_rate) +{ + if (policy_is_shared(cdbs->cur_policy)) { + ktime_t time_now = ktime_get(); + s64 delta_us = ktime_us_delta(time_now, cdbs->time_stamp); + + /* Do nothing if we recently have sampled */ + if (delta_us < (s64)(sampling_rate / 2)) + return false; + else + cdbs->time_stamp = time_now; + } + + return true; +} +EXPORT_SYMBOL_GPL(need_load_eval); + +static void set_sampling_rate(struct dbs_data *dbs_data, + unsigned int sampling_rate) +{ + if (dbs_data->cdata->governor == GOV_CONSERVATIVE) { + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + cs_tuners->sampling_rate = sampling_rate; + } else { + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + od_tuners->sampling_rate = sampling_rate; + } +} + +int cpufreq_governor_dbs(struct cpufreq_policy *policy, + struct common_dbs_data *cdata, unsigned int event) +{ + struct dbs_data *dbs_data; + struct od_cpu_dbs_info_s *od_dbs_info = NULL; + struct cs_cpu_dbs_info_s *cs_dbs_info = NULL; + struct od_ops *od_ops = NULL; + struct od_dbs_tuners *od_tuners = NULL; + struct cs_dbs_tuners *cs_tuners = NULL; + struct cpu_dbs_common_info *cpu_cdbs; + unsigned int sampling_rate, latency, ignore_nice, j, cpu = policy->cpu; + int io_busy = 0; + int rc; + + if (have_governor_per_policy()) + dbs_data = policy->governor_data; + else + dbs_data = cdata->gdbs_data; + + WARN_ON(!dbs_data && (event != CPUFREQ_GOV_POLICY_INIT)); + + switch (event) { + case CPUFREQ_GOV_POLICY_INIT: + if (have_governor_per_policy()) { + WARN_ON(dbs_data); + } else if (dbs_data) { + dbs_data->usage_count++; + policy->governor_data = dbs_data; + return 0; + } + + dbs_data = kzalloc(sizeof(*dbs_data), GFP_KERNEL); + if (!dbs_data) { + pr_err("%s: POLICY_INIT: kzalloc failed\n", __func__); + return -ENOMEM; + } + + dbs_data->cdata = cdata; + dbs_data->usage_count = 1; + rc = cdata->init(dbs_data); + if (rc) { + pr_err("%s: POLICY_INIT: init() failed\n", __func__); + kfree(dbs_data); + return rc; + } + + if (!have_governor_per_policy()) + WARN_ON(cpufreq_get_global_kobject()); + + rc = sysfs_create_group(get_governor_parent_kobj(policy), + get_sysfs_attr(dbs_data)); + if (rc) { + cdata->exit(dbs_data); + kfree(dbs_data); + return rc; + } + + policy->governor_data = dbs_data; + + /* policy latency is in ns. Convert it to us first */ + latency = policy->cpuinfo.transition_latency / 1000; + if (latency == 0) + latency = 1; + + /* Bring kernel and HW constraints together */ + dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate, + MIN_LATENCY_MULTIPLIER * latency); + set_sampling_rate(dbs_data, max(dbs_data->min_sampling_rate, + latency * LATENCY_MULTIPLIER)); + + if ((cdata->governor == GOV_CONSERVATIVE) && + (!policy->governor->initialized)) { + struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; + + cpufreq_register_notifier(cs_ops->notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + } + + if (!have_governor_per_policy()) + cdata->gdbs_data = dbs_data; + + return 0; + case CPUFREQ_GOV_POLICY_EXIT: + if (!--dbs_data->usage_count) { + sysfs_remove_group(get_governor_parent_kobj(policy), + get_sysfs_attr(dbs_data)); + + if (!have_governor_per_policy()) + cpufreq_put_global_kobject(); + + if ((dbs_data->cdata->governor == GOV_CONSERVATIVE) && + (policy->governor->initialized == 1)) { + struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; + + cpufreq_unregister_notifier(cs_ops->notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + } + + cdata->exit(dbs_data); + kfree(dbs_data); + cdata->gdbs_data = NULL; + } + + policy->governor_data = NULL; + return 0; + } + + cpu_cdbs = dbs_data->cdata->get_cpu_cdbs(cpu); + + if (dbs_data->cdata->governor == GOV_CONSERVATIVE) { + cs_tuners = dbs_data->tuners; + cs_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu); + sampling_rate = cs_tuners->sampling_rate; + ignore_nice = cs_tuners->ignore_nice_load; + } else { + od_tuners = dbs_data->tuners; + od_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu); + sampling_rate = od_tuners->sampling_rate; + ignore_nice = od_tuners->ignore_nice_load; + od_ops = dbs_data->cdata->gov_ops; + io_busy = od_tuners->io_is_busy; + } + + switch (event) { + case CPUFREQ_GOV_START: + if (!policy->cur) + return -EINVAL; + + mutex_lock(&dbs_data->mutex); + + for_each_cpu(j, policy->cpus) { + struct cpu_dbs_common_info *j_cdbs = + dbs_data->cdata->get_cpu_cdbs(j); + unsigned int prev_load; + + j_cdbs->cpu = j; + j_cdbs->cur_policy = policy; + j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, + &j_cdbs->prev_cpu_wall, io_busy); + + prev_load = (unsigned int) + (j_cdbs->prev_cpu_wall - j_cdbs->prev_cpu_idle); + j_cdbs->prev_load = 100 * prev_load / + (unsigned int) j_cdbs->prev_cpu_wall; + + if (ignore_nice) + j_cdbs->prev_cpu_nice = + kcpustat_cpu(j).cpustat[CPUTIME_NICE]; + + mutex_init(&j_cdbs->timer_mutex); + INIT_DEFERRABLE_WORK(&j_cdbs->work, + dbs_data->cdata->gov_dbs_timer); + } + + if (dbs_data->cdata->governor == GOV_CONSERVATIVE) { + cs_dbs_info->down_skip = 0; + cs_dbs_info->enable = 1; + cs_dbs_info->requested_freq = policy->cur; + } else { + od_dbs_info->rate_mult = 1; + od_dbs_info->sample_type = OD_NORMAL_SAMPLE; + od_ops->powersave_bias_init_cpu(cpu); + } + + mutex_unlock(&dbs_data->mutex); + + /* Initiate timer time stamp */ + cpu_cdbs->time_stamp = ktime_get(); + + gov_queue_work(dbs_data, policy, + delay_for_sampling_rate(sampling_rate), true); + break; + + case CPUFREQ_GOV_STOP: + if (dbs_data->cdata->governor == GOV_CONSERVATIVE) + cs_dbs_info->enable = 0; + + gov_cancel_work(dbs_data, policy); + + mutex_lock(&dbs_data->mutex); + mutex_destroy(&cpu_cdbs->timer_mutex); + cpu_cdbs->cur_policy = NULL; + + mutex_unlock(&dbs_data->mutex); + + break; + + case CPUFREQ_GOV_LIMITS: + mutex_lock(&dbs_data->mutex); + if (!cpu_cdbs->cur_policy) { + mutex_unlock(&dbs_data->mutex); + break; + } + mutex_lock(&cpu_cdbs->timer_mutex); + if (policy->max < cpu_cdbs->cur_policy->cur) + __cpufreq_driver_target(cpu_cdbs->cur_policy, + policy->max, CPUFREQ_RELATION_H); + else if (policy->min > cpu_cdbs->cur_policy->cur) + __cpufreq_driver_target(cpu_cdbs->cur_policy, + policy->min, CPUFREQ_RELATION_L); + dbs_check_cpu(dbs_data, cpu); + mutex_unlock(&cpu_cdbs->timer_mutex); + mutex_unlock(&dbs_data->mutex); + break; + } + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_governor_dbs); diff --git a/kernel/drivers/cpufreq/cpufreq_governor.h b/kernel/drivers/cpufreq/cpufreq_governor.h new file mode 100644 index 000000000..cc401d147 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_governor.h @@ -0,0 +1,280 @@ +/* + * drivers/cpufreq/cpufreq_governor.h + * + * Header file for CPUFreq governors common code + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * (C) 2003 Jun Nakajima <jun.nakajima@intel.com> + * (C) 2009 Alexander Clouter <alex@digriz.org.uk> + * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _CPUFREQ_GOVERNOR_H +#define _CPUFREQ_GOVERNOR_H + +#include <linux/cpufreq.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/mutex.h> + +/* + * The polling frequency depends on the capability of the processor. Default + * polling frequency is 1000 times the transition latency of the processor. The + * governor will work on any processor with transition latency <= 10ms, using + * appropriate sampling rate. + * + * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL) + * this governor will not work. All times here are in us (micro seconds). + */ +#define MIN_SAMPLING_RATE_RATIO (2) +#define LATENCY_MULTIPLIER (1000) +#define MIN_LATENCY_MULTIPLIER (20) +#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000) + +/* Ondemand Sampling types */ +enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE}; + +/* + * Macro for creating governors sysfs routines + * + * - gov_sys: One governor instance per whole system + * - gov_pol: One governor instance per policy + */ + +/* Create attributes */ +#define gov_sys_attr_ro(_name) \ +static struct global_attr _name##_gov_sys = \ +__ATTR(_name, 0444, show_##_name##_gov_sys, NULL) + +#define gov_sys_attr_rw(_name) \ +static struct global_attr _name##_gov_sys = \ +__ATTR(_name, 0644, show_##_name##_gov_sys, store_##_name##_gov_sys) + +#define gov_pol_attr_ro(_name) \ +static struct freq_attr _name##_gov_pol = \ +__ATTR(_name, 0444, show_##_name##_gov_pol, NULL) + +#define gov_pol_attr_rw(_name) \ +static struct freq_attr _name##_gov_pol = \ +__ATTR(_name, 0644, show_##_name##_gov_pol, store_##_name##_gov_pol) + +#define gov_sys_pol_attr_rw(_name) \ + gov_sys_attr_rw(_name); \ + gov_pol_attr_rw(_name) + +#define gov_sys_pol_attr_ro(_name) \ + gov_sys_attr_ro(_name); \ + gov_pol_attr_ro(_name) + +/* Create show/store routines */ +#define show_one(_gov, file_name) \ +static ssize_t show_##file_name##_gov_sys \ +(struct kobject *kobj, struct attribute *attr, char *buf) \ +{ \ + struct _gov##_dbs_tuners *tuners = _gov##_dbs_cdata.gdbs_data->tuners; \ + return sprintf(buf, "%u\n", tuners->file_name); \ +} \ + \ +static ssize_t show_##file_name##_gov_pol \ +(struct cpufreq_policy *policy, char *buf) \ +{ \ + struct dbs_data *dbs_data = policy->governor_data; \ + struct _gov##_dbs_tuners *tuners = dbs_data->tuners; \ + return sprintf(buf, "%u\n", tuners->file_name); \ +} + +#define store_one(_gov, file_name) \ +static ssize_t store_##file_name##_gov_sys \ +(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \ +{ \ + struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \ + return store_##file_name(dbs_data, buf, count); \ +} \ + \ +static ssize_t store_##file_name##_gov_pol \ +(struct cpufreq_policy *policy, const char *buf, size_t count) \ +{ \ + struct dbs_data *dbs_data = policy->governor_data; \ + return store_##file_name(dbs_data, buf, count); \ +} + +#define show_store_one(_gov, file_name) \ +show_one(_gov, file_name); \ +store_one(_gov, file_name) + +/* create helper routines */ +#define define_get_cpu_dbs_routines(_dbs_info) \ +static struct cpu_dbs_common_info *get_cpu_cdbs(int cpu) \ +{ \ + return &per_cpu(_dbs_info, cpu).cdbs; \ +} \ + \ +static void *get_cpu_dbs_info_s(int cpu) \ +{ \ + return &per_cpu(_dbs_info, cpu); \ +} + +/* + * Abbreviations: + * dbs: used as a shortform for demand based switching It helps to keep variable + * names smaller, simpler + * cdbs: common dbs + * od_*: On-demand governor + * cs_*: Conservative governor + */ + +/* Per cpu structures */ +struct cpu_dbs_common_info { + int cpu; + u64 prev_cpu_idle; + u64 prev_cpu_wall; + u64 prev_cpu_nice; + /* + * Used to keep track of load in the previous interval. However, when + * explicitly set to zero, it is used as a flag to ensure that we copy + * the previous load to the current interval only once, upon the first + * wake-up from idle. + */ + unsigned int prev_load; + struct cpufreq_policy *cur_policy; + struct delayed_work work; + /* + * percpu mutex that serializes governor limit change with gov_dbs_timer + * invocation. We do not want gov_dbs_timer to run when user is changing + * the governor or limits. + */ + struct mutex timer_mutex; + ktime_t time_stamp; +}; + +struct od_cpu_dbs_info_s { + struct cpu_dbs_common_info cdbs; + struct cpufreq_frequency_table *freq_table; + unsigned int freq_lo; + unsigned int freq_lo_jiffies; + unsigned int freq_hi_jiffies; + unsigned int rate_mult; + unsigned int sample_type:1; +}; + +struct cs_cpu_dbs_info_s { + struct cpu_dbs_common_info cdbs; + unsigned int down_skip; + unsigned int requested_freq; + unsigned int enable:1; +}; + +/* Per policy Governors sysfs tunables */ +struct od_dbs_tuners { + unsigned int ignore_nice_load; + unsigned int sampling_rate; + unsigned int sampling_down_factor; + unsigned int up_threshold; + unsigned int powersave_bias; + unsigned int io_is_busy; +}; + +struct cs_dbs_tuners { + unsigned int ignore_nice_load; + unsigned int sampling_rate; + unsigned int sampling_down_factor; + unsigned int up_threshold; + unsigned int down_threshold; + unsigned int freq_step; +}; + +/* Common Governor data across policies */ +struct dbs_data; +struct common_dbs_data { + /* Common across governors */ + #define GOV_ONDEMAND 0 + #define GOV_CONSERVATIVE 1 + int governor; + struct attribute_group *attr_group_gov_sys; /* one governor - system */ + struct attribute_group *attr_group_gov_pol; /* one governor - policy */ + + /* + * Common data for platforms that don't set + * CPUFREQ_HAVE_GOVERNOR_PER_POLICY + */ + struct dbs_data *gdbs_data; + + struct cpu_dbs_common_info *(*get_cpu_cdbs)(int cpu); + void *(*get_cpu_dbs_info_s)(int cpu); + void (*gov_dbs_timer)(struct work_struct *work); + void (*gov_check_cpu)(int cpu, unsigned int load); + int (*init)(struct dbs_data *dbs_data); + void (*exit)(struct dbs_data *dbs_data); + + /* Governor specific ops, see below */ + void *gov_ops; +}; + +/* Governor Per policy data */ +struct dbs_data { + struct common_dbs_data *cdata; + unsigned int min_sampling_rate; + int usage_count; + void *tuners; + + /* dbs_mutex protects dbs_enable in governor start/stop */ + struct mutex mutex; +}; + +/* Governor specific ops, will be passed to dbs_data->gov_ops */ +struct od_ops { + void (*powersave_bias_init_cpu)(int cpu); + unsigned int (*powersave_bias_target)(struct cpufreq_policy *policy, + unsigned int freq_next, unsigned int relation); + void (*freq_increase)(struct cpufreq_policy *policy, unsigned int freq); +}; + +struct cs_ops { + struct notifier_block *notifier_block; +}; + +static inline int delay_for_sampling_rate(unsigned int sampling_rate) +{ + int delay = usecs_to_jiffies(sampling_rate); + + /* We want all CPUs to do sampling nearly on same jiffy */ + if (num_online_cpus() > 1) + delay -= jiffies % delay; + + return delay; +} + +#define declare_show_sampling_rate_min(_gov) \ +static ssize_t show_sampling_rate_min_gov_sys \ +(struct kobject *kobj, struct attribute *attr, char *buf) \ +{ \ + struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \ + return sprintf(buf, "%u\n", dbs_data->min_sampling_rate); \ +} \ + \ +static ssize_t show_sampling_rate_min_gov_pol \ +(struct cpufreq_policy *policy, char *buf) \ +{ \ + struct dbs_data *dbs_data = policy->governor_data; \ + return sprintf(buf, "%u\n", dbs_data->min_sampling_rate); \ +} + +extern struct mutex cpufreq_governor_lock; + +void dbs_check_cpu(struct dbs_data *dbs_data, int cpu); +bool need_load_eval(struct cpu_dbs_common_info *cdbs, + unsigned int sampling_rate); +int cpufreq_governor_dbs(struct cpufreq_policy *policy, + struct common_dbs_data *cdata, unsigned int event); +void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy, + unsigned int delay, bool all_cpus); +void od_register_powersave_bias_handler(unsigned int (*f) + (struct cpufreq_policy *, unsigned int, unsigned int), + unsigned int powersave_bias); +void od_unregister_powersave_bias_handler(void); +#endif /* _CPUFREQ_GOVERNOR_H */ diff --git a/kernel/drivers/cpufreq/cpufreq_ondemand.c b/kernel/drivers/cpufreq/cpufreq_ondemand.c new file mode 100644 index 000000000..ad3f38fd3 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_ondemand.c @@ -0,0 +1,631 @@ +/* + * drivers/cpufreq/cpufreq_ondemand.c + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * Jun Nakajima <jun.nakajima@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpu.h> +#include <linux/percpu-defs.h> +#include <linux/slab.h> +#include <linux/tick.h> +#include "cpufreq_governor.h" + +/* On-demand governor macros */ +#define DEF_FREQUENCY_UP_THRESHOLD (80) +#define DEF_SAMPLING_DOWN_FACTOR (1) +#define MAX_SAMPLING_DOWN_FACTOR (100000) +#define MICRO_FREQUENCY_UP_THRESHOLD (95) +#define MICRO_FREQUENCY_MIN_SAMPLE_RATE (10000) +#define MIN_FREQUENCY_UP_THRESHOLD (11) +#define MAX_FREQUENCY_UP_THRESHOLD (100) + +static DEFINE_PER_CPU(struct od_cpu_dbs_info_s, od_cpu_dbs_info); + +static struct od_ops od_ops; + +#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND +static struct cpufreq_governor cpufreq_gov_ondemand; +#endif + +static unsigned int default_powersave_bias; + +static void ondemand_powersave_bias_init_cpu(int cpu) +{ + struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu); + + dbs_info->freq_table = cpufreq_frequency_get_table(cpu); + dbs_info->freq_lo = 0; +} + +/* + * Not all CPUs want IO time to be accounted as busy; this depends on how + * efficient idling at a higher frequency/voltage is. + * Pavel Machek says this is not so for various generations of AMD and old + * Intel systems. + * Mike Chan (android.com) claims this is also not true for ARM. + * Because of this, whitelist specific known (series) of CPUs by default, and + * leave all others up to the user. + */ +static int should_io_be_busy(void) +{ +#if defined(CONFIG_X86) + /* + * For Intel, Core 2 (model 15) and later have an efficient idle. + */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model >= 15) + return 1; +#endif + return 0; +} + +/* + * Find right freq to be set now with powersave_bias on. + * Returns the freq_hi to be used right now and will set freq_hi_jiffies, + * freq_lo, and freq_lo_jiffies in percpu area for averaging freqs. + */ +static unsigned int generic_powersave_bias_target(struct cpufreq_policy *policy, + unsigned int freq_next, unsigned int relation) +{ + unsigned int freq_req, freq_reduc, freq_avg; + unsigned int freq_hi, freq_lo; + unsigned int index = 0; + unsigned int jiffies_total, jiffies_hi, jiffies_lo; + struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, + policy->cpu); + struct dbs_data *dbs_data = policy->governor_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + + if (!dbs_info->freq_table) { + dbs_info->freq_lo = 0; + dbs_info->freq_lo_jiffies = 0; + return freq_next; + } + + cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next, + relation, &index); + freq_req = dbs_info->freq_table[index].frequency; + freq_reduc = freq_req * od_tuners->powersave_bias / 1000; + freq_avg = freq_req - freq_reduc; + + /* Find freq bounds for freq_avg in freq_table */ + index = 0; + cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg, + CPUFREQ_RELATION_H, &index); + freq_lo = dbs_info->freq_table[index].frequency; + index = 0; + cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg, + CPUFREQ_RELATION_L, &index); + freq_hi = dbs_info->freq_table[index].frequency; + + /* Find out how long we have to be in hi and lo freqs */ + if (freq_hi == freq_lo) { + dbs_info->freq_lo = 0; + dbs_info->freq_lo_jiffies = 0; + return freq_lo; + } + jiffies_total = usecs_to_jiffies(od_tuners->sampling_rate); + jiffies_hi = (freq_avg - freq_lo) * jiffies_total; + jiffies_hi += ((freq_hi - freq_lo) / 2); + jiffies_hi /= (freq_hi - freq_lo); + jiffies_lo = jiffies_total - jiffies_hi; + dbs_info->freq_lo = freq_lo; + dbs_info->freq_lo_jiffies = jiffies_lo; + dbs_info->freq_hi_jiffies = jiffies_hi; + return freq_hi; +} + +static void ondemand_powersave_bias_init(void) +{ + int i; + for_each_online_cpu(i) { + ondemand_powersave_bias_init_cpu(i); + } +} + +static void dbs_freq_increase(struct cpufreq_policy *policy, unsigned int freq) +{ + struct dbs_data *dbs_data = policy->governor_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + + if (od_tuners->powersave_bias) + freq = od_ops.powersave_bias_target(policy, freq, + CPUFREQ_RELATION_H); + else if (policy->cur == policy->max) + return; + + __cpufreq_driver_target(policy, freq, od_tuners->powersave_bias ? + CPUFREQ_RELATION_L : CPUFREQ_RELATION_H); +} + +/* + * Every sampling_rate, we check, if current idle time is less than 20% + * (default), then we try to increase frequency. Else, we adjust the frequency + * proportional to load. + */ +static void od_check_cpu(int cpu, unsigned int load) +{ + struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu); + struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy; + struct dbs_data *dbs_data = policy->governor_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + + dbs_info->freq_lo = 0; + + /* Check for frequency increase */ + if (load > od_tuners->up_threshold) { + /* If switching to max speed, apply sampling_down_factor */ + if (policy->cur < policy->max) + dbs_info->rate_mult = + od_tuners->sampling_down_factor; + dbs_freq_increase(policy, policy->max); + } else { + /* Calculate the next frequency proportional to load */ + unsigned int freq_next, min_f, max_f; + + min_f = policy->cpuinfo.min_freq; + max_f = policy->cpuinfo.max_freq; + freq_next = min_f + load * (max_f - min_f) / 100; + + /* No longer fully busy, reset rate_mult */ + dbs_info->rate_mult = 1; + + if (!od_tuners->powersave_bias) { + __cpufreq_driver_target(policy, freq_next, + CPUFREQ_RELATION_C); + return; + } + + freq_next = od_ops.powersave_bias_target(policy, freq_next, + CPUFREQ_RELATION_L); + __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_C); + } +} + +static void od_dbs_timer(struct work_struct *work) +{ + struct od_cpu_dbs_info_s *dbs_info = + container_of(work, struct od_cpu_dbs_info_s, cdbs.work.work); + unsigned int cpu = dbs_info->cdbs.cur_policy->cpu; + struct od_cpu_dbs_info_s *core_dbs_info = &per_cpu(od_cpu_dbs_info, + cpu); + struct dbs_data *dbs_data = dbs_info->cdbs.cur_policy->governor_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + int delay = 0, sample_type = core_dbs_info->sample_type; + bool modify_all = true; + + mutex_lock(&core_dbs_info->cdbs.timer_mutex); + if (!need_load_eval(&core_dbs_info->cdbs, od_tuners->sampling_rate)) { + modify_all = false; + goto max_delay; + } + + /* Common NORMAL_SAMPLE setup */ + core_dbs_info->sample_type = OD_NORMAL_SAMPLE; + if (sample_type == OD_SUB_SAMPLE) { + delay = core_dbs_info->freq_lo_jiffies; + __cpufreq_driver_target(core_dbs_info->cdbs.cur_policy, + core_dbs_info->freq_lo, CPUFREQ_RELATION_H); + } else { + dbs_check_cpu(dbs_data, cpu); + if (core_dbs_info->freq_lo) { + /* Setup timer for SUB_SAMPLE */ + core_dbs_info->sample_type = OD_SUB_SAMPLE; + delay = core_dbs_info->freq_hi_jiffies; + } + } + +max_delay: + if (!delay) + delay = delay_for_sampling_rate(od_tuners->sampling_rate + * core_dbs_info->rate_mult); + + gov_queue_work(dbs_data, dbs_info->cdbs.cur_policy, delay, modify_all); + mutex_unlock(&core_dbs_info->cdbs.timer_mutex); +} + +/************************** sysfs interface ************************/ +static struct common_dbs_data od_dbs_cdata; + +/** + * update_sampling_rate - update sampling rate effective immediately if needed. + * @new_rate: new sampling rate + * + * If new rate is smaller than the old, simply updating + * dbs_tuners_int.sampling_rate might not be appropriate. For example, if the + * original sampling_rate was 1 second and the requested new sampling rate is 10 + * ms because the user needs immediate reaction from ondemand governor, but not + * sure if higher frequency will be required or not, then, the governor may + * change the sampling rate too late; up to 1 second later. Thus, if we are + * reducing the sampling rate, we need to make the new value effective + * immediately. + */ +static void update_sampling_rate(struct dbs_data *dbs_data, + unsigned int new_rate) +{ + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + int cpu; + + od_tuners->sampling_rate = new_rate = max(new_rate, + dbs_data->min_sampling_rate); + + for_each_online_cpu(cpu) { + struct cpufreq_policy *policy; + struct od_cpu_dbs_info_s *dbs_info; + unsigned long next_sampling, appointed_at; + + policy = cpufreq_cpu_get(cpu); + if (!policy) + continue; + if (policy->governor != &cpufreq_gov_ondemand) { + cpufreq_cpu_put(policy); + continue; + } + dbs_info = &per_cpu(od_cpu_dbs_info, cpu); + cpufreq_cpu_put(policy); + + mutex_lock(&dbs_info->cdbs.timer_mutex); + + if (!delayed_work_pending(&dbs_info->cdbs.work)) { + mutex_unlock(&dbs_info->cdbs.timer_mutex); + continue; + } + + next_sampling = jiffies + usecs_to_jiffies(new_rate); + appointed_at = dbs_info->cdbs.work.timer.expires; + + if (time_before(next_sampling, appointed_at)) { + + mutex_unlock(&dbs_info->cdbs.timer_mutex); + cancel_delayed_work_sync(&dbs_info->cdbs.work); + mutex_lock(&dbs_info->cdbs.timer_mutex); + + gov_queue_work(dbs_data, dbs_info->cdbs.cur_policy, + usecs_to_jiffies(new_rate), true); + + } + mutex_unlock(&dbs_info->cdbs.timer_mutex); + } +} + +static ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf, + size_t count) +{ + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + update_sampling_rate(dbs_data, input); + return count; +} + +static ssize_t store_io_is_busy(struct dbs_data *dbs_data, const char *buf, + size_t count) +{ + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + unsigned int input; + int ret; + unsigned int j; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + od_tuners->io_is_busy = !!input; + + /* we need to re-evaluate prev_cpu_idle */ + for_each_online_cpu(j) { + struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, + j); + dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j, + &dbs_info->cdbs.prev_cpu_wall, od_tuners->io_is_busy); + } + return count; +} + +static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf, + size_t count) +{ + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || + input < MIN_FREQUENCY_UP_THRESHOLD) { + return -EINVAL; + } + + od_tuners->up_threshold = input; + return count; +} + +static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data, + const char *buf, size_t count) +{ + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + unsigned int input, j; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) + return -EINVAL; + od_tuners->sampling_down_factor = input; + + /* Reset down sampling multiplier in case it was active */ + for_each_online_cpu(j) { + struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, + j); + dbs_info->rate_mult = 1; + } + return count; +} + +static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data, + const char *buf, size_t count) +{ + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + unsigned int input; + int ret; + + unsigned int j; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + if (input > 1) + input = 1; + + if (input == od_tuners->ignore_nice_load) { /* nothing to do */ + return count; + } + od_tuners->ignore_nice_load = input; + + /* we need to re-evaluate prev_cpu_idle */ + for_each_online_cpu(j) { + struct od_cpu_dbs_info_s *dbs_info; + dbs_info = &per_cpu(od_cpu_dbs_info, j); + dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j, + &dbs_info->cdbs.prev_cpu_wall, od_tuners->io_is_busy); + if (od_tuners->ignore_nice_load) + dbs_info->cdbs.prev_cpu_nice = + kcpustat_cpu(j).cpustat[CPUTIME_NICE]; + + } + return count; +} + +static ssize_t store_powersave_bias(struct dbs_data *dbs_data, const char *buf, + size_t count) +{ + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1) + return -EINVAL; + + if (input > 1000) + input = 1000; + + od_tuners->powersave_bias = input; + ondemand_powersave_bias_init(); + return count; +} + +show_store_one(od, sampling_rate); +show_store_one(od, io_is_busy); +show_store_one(od, up_threshold); +show_store_one(od, sampling_down_factor); +show_store_one(od, ignore_nice_load); +show_store_one(od, powersave_bias); +declare_show_sampling_rate_min(od); + +gov_sys_pol_attr_rw(sampling_rate); +gov_sys_pol_attr_rw(io_is_busy); +gov_sys_pol_attr_rw(up_threshold); +gov_sys_pol_attr_rw(sampling_down_factor); +gov_sys_pol_attr_rw(ignore_nice_load); +gov_sys_pol_attr_rw(powersave_bias); +gov_sys_pol_attr_ro(sampling_rate_min); + +static struct attribute *dbs_attributes_gov_sys[] = { + &sampling_rate_min_gov_sys.attr, + &sampling_rate_gov_sys.attr, + &up_threshold_gov_sys.attr, + &sampling_down_factor_gov_sys.attr, + &ignore_nice_load_gov_sys.attr, + &powersave_bias_gov_sys.attr, + &io_is_busy_gov_sys.attr, + NULL +}; + +static struct attribute_group od_attr_group_gov_sys = { + .attrs = dbs_attributes_gov_sys, + .name = "ondemand", +}; + +static struct attribute *dbs_attributes_gov_pol[] = { + &sampling_rate_min_gov_pol.attr, + &sampling_rate_gov_pol.attr, + &up_threshold_gov_pol.attr, + &sampling_down_factor_gov_pol.attr, + &ignore_nice_load_gov_pol.attr, + &powersave_bias_gov_pol.attr, + &io_is_busy_gov_pol.attr, + NULL +}; + +static struct attribute_group od_attr_group_gov_pol = { + .attrs = dbs_attributes_gov_pol, + .name = "ondemand", +}; + +/************************** sysfs end ************************/ + +static int od_init(struct dbs_data *dbs_data) +{ + struct od_dbs_tuners *tuners; + u64 idle_time; + int cpu; + + tuners = kzalloc(sizeof(*tuners), GFP_KERNEL); + if (!tuners) { + pr_err("%s: kzalloc failed\n", __func__); + return -ENOMEM; + } + + cpu = get_cpu(); + idle_time = get_cpu_idle_time_us(cpu, NULL); + put_cpu(); + if (idle_time != -1ULL) { + /* Idle micro accounting is supported. Use finer thresholds */ + tuners->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD; + /* + * In nohz/micro accounting case we set the minimum frequency + * not depending on HZ, but fixed (very low). The deferred + * timer might skip some samples if idle/sleeping as needed. + */ + dbs_data->min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE; + } else { + tuners->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; + + /* For correct statistics, we need 10 ticks for each measure */ + dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO * + jiffies_to_usecs(10); + } + + tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; + tuners->ignore_nice_load = 0; + tuners->powersave_bias = default_powersave_bias; + tuners->io_is_busy = should_io_be_busy(); + + dbs_data->tuners = tuners; + mutex_init(&dbs_data->mutex); + return 0; +} + +static void od_exit(struct dbs_data *dbs_data) +{ + kfree(dbs_data->tuners); +} + +define_get_cpu_dbs_routines(od_cpu_dbs_info); + +static struct od_ops od_ops = { + .powersave_bias_init_cpu = ondemand_powersave_bias_init_cpu, + .powersave_bias_target = generic_powersave_bias_target, + .freq_increase = dbs_freq_increase, +}; + +static struct common_dbs_data od_dbs_cdata = { + .governor = GOV_ONDEMAND, + .attr_group_gov_sys = &od_attr_group_gov_sys, + .attr_group_gov_pol = &od_attr_group_gov_pol, + .get_cpu_cdbs = get_cpu_cdbs, + .get_cpu_dbs_info_s = get_cpu_dbs_info_s, + .gov_dbs_timer = od_dbs_timer, + .gov_check_cpu = od_check_cpu, + .gov_ops = &od_ops, + .init = od_init, + .exit = od_exit, +}; + +static void od_set_powersave_bias(unsigned int powersave_bias) +{ + struct cpufreq_policy *policy; + struct dbs_data *dbs_data; + struct od_dbs_tuners *od_tuners; + unsigned int cpu; + cpumask_t done; + + default_powersave_bias = powersave_bias; + cpumask_clear(&done); + + get_online_cpus(); + for_each_online_cpu(cpu) { + if (cpumask_test_cpu(cpu, &done)) + continue; + + policy = per_cpu(od_cpu_dbs_info, cpu).cdbs.cur_policy; + if (!policy) + continue; + + cpumask_or(&done, &done, policy->cpus); + + if (policy->governor != &cpufreq_gov_ondemand) + continue; + + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; + } + put_online_cpus(); +} + +void od_register_powersave_bias_handler(unsigned int (*f) + (struct cpufreq_policy *, unsigned int, unsigned int), + unsigned int powersave_bias) +{ + od_ops.powersave_bias_target = f; + od_set_powersave_bias(powersave_bias); +} +EXPORT_SYMBOL_GPL(od_register_powersave_bias_handler); + +void od_unregister_powersave_bias_handler(void) +{ + od_ops.powersave_bias_target = generic_powersave_bias_target; + od_set_powersave_bias(0); +} +EXPORT_SYMBOL_GPL(od_unregister_powersave_bias_handler); + +static int od_cpufreq_governor_dbs(struct cpufreq_policy *policy, + unsigned int event) +{ + return cpufreq_governor_dbs(policy, &od_dbs_cdata, event); +} + +#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND +static +#endif +struct cpufreq_governor cpufreq_gov_ondemand = { + .name = "ondemand", + .governor = od_cpufreq_governor_dbs, + .max_transition_latency = TRANSITION_LATENCY_LIMIT, + .owner = THIS_MODULE, +}; + +static int __init cpufreq_gov_dbs_init(void) +{ + return cpufreq_register_governor(&cpufreq_gov_ondemand); +} + +static void __exit cpufreq_gov_dbs_exit(void) +{ + cpufreq_unregister_governor(&cpufreq_gov_ondemand); +} + +MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>"); +MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>"); +MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " + "Low Latency Frequency Transition capable processors"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND +fs_initcall(cpufreq_gov_dbs_init); +#else +module_init(cpufreq_gov_dbs_init); +#endif +module_exit(cpufreq_gov_dbs_exit); diff --git a/kernel/drivers/cpufreq/cpufreq_opp.c b/kernel/drivers/cpufreq/cpufreq_opp.c new file mode 100644 index 000000000..773bcde89 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_opp.c @@ -0,0 +1,110 @@ +/* + * Generic OPP helper interface for CPUFreq drivers + * + * Copyright (C) 2009-2014 Texas Instruments Incorporated. + * Nishanth Menon + * Romit Dasgupta + * Kevin Hilman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/pm_opp.h> +#include <linux/rcupdate.h> +#include <linux/slab.h> + +/** + * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device + * @dev: device for which we do this operation + * @table: Cpufreq table returned back to caller + * + * Generate a cpufreq table for a provided device- this assumes that the + * opp list is already initialized and ready for usage. + * + * This function allocates required memory for the cpufreq table. It is + * expected that the caller does the required maintenance such as freeing + * the table as required. + * + * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM + * if no memory available for the operation (table is not populated), returns 0 + * if successful and table is populated. + * + * WARNING: It is important for the callers to ensure refreshing their copy of + * the table if any of the mentioned functions have been invoked in the interim. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Since we just use the regular accessor functions to access the internal data + * structures, we use RCU read lock inside this function. As a result, users of + * this function DONOT need to use explicit locks for invoking. + */ +int dev_pm_opp_init_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table) +{ + struct dev_pm_opp *opp; + struct cpufreq_frequency_table *freq_table = NULL; + int i, max_opps, ret = 0; + unsigned long rate; + + rcu_read_lock(); + + max_opps = dev_pm_opp_get_opp_count(dev); + if (max_opps <= 0) { + ret = max_opps ? max_opps : -ENODATA; + goto out; + } + + freq_table = kcalloc((max_opps + 1), sizeof(*freq_table), GFP_ATOMIC); + if (!freq_table) { + ret = -ENOMEM; + goto out; + } + + for (i = 0, rate = 0; i < max_opps; i++, rate++) { + /* find next rate */ + opp = dev_pm_opp_find_freq_ceil(dev, &rate); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + goto out; + } + freq_table[i].driver_data = i; + freq_table[i].frequency = rate / 1000; + } + + freq_table[i].driver_data = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *table = &freq_table[0]; + +out: + rcu_read_unlock(); + if (ret) + kfree(freq_table); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table); + +/** + * dev_pm_opp_free_cpufreq_table() - free the cpufreq table + * @dev: device for which we do this operation + * @table: table to free + * + * Free up the table allocated by dev_pm_opp_init_cpufreq_table + */ +void dev_pm_opp_free_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table) +{ + if (!table) + return; + + kfree(*table); + *table = NULL; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table); diff --git a/kernel/drivers/cpufreq/cpufreq_performance.c b/kernel/drivers/cpufreq/cpufreq_performance.c new file mode 100644 index 000000000..cf117deb3 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_performance.c @@ -0,0 +1,60 @@ +/* + * linux/drivers/cpufreq/cpufreq_performance.c + * + * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/module.h> + +static int cpufreq_governor_performance(struct cpufreq_policy *policy, + unsigned int event) +{ + switch (event) { + case CPUFREQ_GOV_START: + case CPUFREQ_GOV_LIMITS: + pr_debug("setting to %u kHz because of event %u\n", + policy->max, event); + __cpufreq_driver_target(policy, policy->max, + CPUFREQ_RELATION_H); + break; + default: + break; + } + return 0; +} + +#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE_MODULE +static +#endif +struct cpufreq_governor cpufreq_gov_performance = { + .name = "performance", + .governor = cpufreq_governor_performance, + .owner = THIS_MODULE, +}; + +static int __init cpufreq_gov_performance_init(void) +{ + return cpufreq_register_governor(&cpufreq_gov_performance); +} + +static void __exit cpufreq_gov_performance_exit(void) +{ + cpufreq_unregister_governor(&cpufreq_gov_performance); +} + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("CPUfreq policy governor 'performance'"); +MODULE_LICENSE("GPL"); + +fs_initcall(cpufreq_gov_performance_init); +module_exit(cpufreq_gov_performance_exit); diff --git a/kernel/drivers/cpufreq/cpufreq_powersave.c b/kernel/drivers/cpufreq/cpufreq_powersave.c new file mode 100644 index 000000000..e3b874c23 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_powersave.c @@ -0,0 +1,64 @@ +/* + * linux/drivers/cpufreq/cpufreq_powersave.c + * + * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/module.h> + +static int cpufreq_governor_powersave(struct cpufreq_policy *policy, + unsigned int event) +{ + switch (event) { + case CPUFREQ_GOV_START: + case CPUFREQ_GOV_LIMITS: + pr_debug("setting to %u kHz because of event %u\n", + policy->min, event); + __cpufreq_driver_target(policy, policy->min, + CPUFREQ_RELATION_L); + break; + default: + break; + } + return 0; +} + +#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE +static +#endif +struct cpufreq_governor cpufreq_gov_powersave = { + .name = "powersave", + .governor = cpufreq_governor_powersave, + .owner = THIS_MODULE, +}; + +static int __init cpufreq_gov_powersave_init(void) +{ + return cpufreq_register_governor(&cpufreq_gov_powersave); +} + +static void __exit cpufreq_gov_powersave_exit(void) +{ + cpufreq_unregister_governor(&cpufreq_gov_powersave); +} + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("CPUfreq policy governor 'powersave'"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE +fs_initcall(cpufreq_gov_powersave_init); +#else +module_init(cpufreq_gov_powersave_init); +#endif +module_exit(cpufreq_gov_powersave_exit); diff --git a/kernel/drivers/cpufreq/cpufreq_stats.c b/kernel/drivers/cpufreq/cpufreq_stats.c new file mode 100644 index 000000000..5e370a30a --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_stats.c @@ -0,0 +1,357 @@ +/* + * drivers/cpufreq/cpufreq_stats.c + * + * Copyright (C) 2003-2004 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * (C) 2004 Zou Nan hai <nanhai.zou@intel.com>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/cputime.h> + +static spinlock_t cpufreq_stats_lock; + +struct cpufreq_stats { + unsigned int total_trans; + unsigned long long last_time; + unsigned int max_state; + unsigned int state_num; + unsigned int last_index; + u64 *time_in_state; + unsigned int *freq_table; +#ifdef CONFIG_CPU_FREQ_STAT_DETAILS + unsigned int *trans_table; +#endif +}; + +static int cpufreq_stats_update(struct cpufreq_stats *stats) +{ + unsigned long long cur_time = get_jiffies_64(); + + spin_lock(&cpufreq_stats_lock); + stats->time_in_state[stats->last_index] += cur_time - stats->last_time; + stats->last_time = cur_time; + spin_unlock(&cpufreq_stats_lock); + return 0; +} + +static ssize_t show_total_trans(struct cpufreq_policy *policy, char *buf) +{ + return sprintf(buf, "%d\n", policy->stats->total_trans); +} + +static ssize_t show_time_in_state(struct cpufreq_policy *policy, char *buf) +{ + struct cpufreq_stats *stats = policy->stats; + ssize_t len = 0; + int i; + + cpufreq_stats_update(stats); + for (i = 0; i < stats->state_num; i++) { + len += sprintf(buf + len, "%u %llu\n", stats->freq_table[i], + (unsigned long long) + jiffies_64_to_clock_t(stats->time_in_state[i])); + } + return len; +} + +#ifdef CONFIG_CPU_FREQ_STAT_DETAILS +static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) +{ + struct cpufreq_stats *stats = policy->stats; + ssize_t len = 0; + int i, j; + + len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n"); + len += snprintf(buf + len, PAGE_SIZE - len, " : "); + for (i = 0; i < stats->state_num; i++) { + if (len >= PAGE_SIZE) + break; + len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", + stats->freq_table[i]); + } + if (len >= PAGE_SIZE) + return PAGE_SIZE; + + len += snprintf(buf + len, PAGE_SIZE - len, "\n"); + + for (i = 0; i < stats->state_num; i++) { + if (len >= PAGE_SIZE) + break; + + len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ", + stats->freq_table[i]); + + for (j = 0; j < stats->state_num; j++) { + if (len >= PAGE_SIZE) + break; + len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", + stats->trans_table[i*stats->max_state+j]); + } + if (len >= PAGE_SIZE) + break; + len += snprintf(buf + len, PAGE_SIZE - len, "\n"); + } + if (len >= PAGE_SIZE) + return PAGE_SIZE; + return len; +} +cpufreq_freq_attr_ro(trans_table); +#endif + +cpufreq_freq_attr_ro(total_trans); +cpufreq_freq_attr_ro(time_in_state); + +static struct attribute *default_attrs[] = { + &total_trans.attr, + &time_in_state.attr, +#ifdef CONFIG_CPU_FREQ_STAT_DETAILS + &trans_table.attr, +#endif + NULL +}; +static struct attribute_group stats_attr_group = { + .attrs = default_attrs, + .name = "stats" +}; + +static int freq_table_get_index(struct cpufreq_stats *stats, unsigned int freq) +{ + int index; + for (index = 0; index < stats->max_state; index++) + if (stats->freq_table[index] == freq) + return index; + return -1; +} + +static void __cpufreq_stats_free_table(struct cpufreq_policy *policy) +{ + struct cpufreq_stats *stats = policy->stats; + + /* Already freed */ + if (!stats) + return; + + pr_debug("%s: Free stats table\n", __func__); + + sysfs_remove_group(&policy->kobj, &stats_attr_group); + kfree(stats->time_in_state); + kfree(stats); + policy->stats = NULL; +} + +static void cpufreq_stats_free_table(unsigned int cpu) +{ + struct cpufreq_policy *policy; + + policy = cpufreq_cpu_get(cpu); + if (!policy) + return; + + __cpufreq_stats_free_table(policy); + + cpufreq_cpu_put(policy); +} + +static int __cpufreq_stats_create_table(struct cpufreq_policy *policy) +{ + unsigned int i = 0, count = 0, ret = -ENOMEM; + struct cpufreq_stats *stats; + unsigned int alloc_size; + unsigned int cpu = policy->cpu; + struct cpufreq_frequency_table *pos, *table; + + /* We need cpufreq table for creating stats table */ + table = cpufreq_frequency_get_table(cpu); + if (unlikely(!table)) + return 0; + + /* stats already initialized */ + if (policy->stats) + return -EEXIST; + + stats = kzalloc(sizeof(*stats), GFP_KERNEL); + if (!stats) + return -ENOMEM; + + /* Find total allocation size */ + cpufreq_for_each_valid_entry(pos, table) + count++; + + alloc_size = count * sizeof(int) + count * sizeof(u64); + +#ifdef CONFIG_CPU_FREQ_STAT_DETAILS + alloc_size += count * count * sizeof(int); +#endif + + /* Allocate memory for time_in_state/freq_table/trans_table in one go */ + stats->time_in_state = kzalloc(alloc_size, GFP_KERNEL); + if (!stats->time_in_state) + goto free_stat; + + stats->freq_table = (unsigned int *)(stats->time_in_state + count); + +#ifdef CONFIG_CPU_FREQ_STAT_DETAILS + stats->trans_table = stats->freq_table + count; +#endif + + stats->max_state = count; + + /* Find valid-unique entries */ + cpufreq_for_each_valid_entry(pos, table) + if (freq_table_get_index(stats, pos->frequency) == -1) + stats->freq_table[i++] = pos->frequency; + + stats->state_num = i; + stats->last_time = get_jiffies_64(); + stats->last_index = freq_table_get_index(stats, policy->cur); + + policy->stats = stats; + ret = sysfs_create_group(&policy->kobj, &stats_attr_group); + if (!ret) + return 0; + + /* We failed, release resources */ + policy->stats = NULL; + kfree(stats->time_in_state); +free_stat: + kfree(stats); + + return ret; +} + +static void cpufreq_stats_create_table(unsigned int cpu) +{ + struct cpufreq_policy *policy; + + /* + * "likely(!policy)" because normally cpufreq_stats will be registered + * before cpufreq driver + */ + policy = cpufreq_cpu_get(cpu); + if (likely(!policy)) + return; + + __cpufreq_stats_create_table(policy); + + cpufreq_cpu_put(policy); +} + +static int cpufreq_stat_notifier_policy(struct notifier_block *nb, + unsigned long val, void *data) +{ + int ret = 0; + struct cpufreq_policy *policy = data; + + if (val == CPUFREQ_CREATE_POLICY) + ret = __cpufreq_stats_create_table(policy); + else if (val == CPUFREQ_REMOVE_POLICY) + __cpufreq_stats_free_table(policy); + + return ret; +} + +static int cpufreq_stat_notifier_trans(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + struct cpufreq_policy *policy = cpufreq_cpu_get(freq->cpu); + struct cpufreq_stats *stats; + int old_index, new_index; + + if (!policy) { + pr_err("%s: No policy found\n", __func__); + return 0; + } + + if (val != CPUFREQ_POSTCHANGE) + goto put_policy; + + if (!policy->stats) { + pr_debug("%s: No stats found\n", __func__); + goto put_policy; + } + + stats = policy->stats; + + old_index = stats->last_index; + new_index = freq_table_get_index(stats, freq->new); + + /* We can't do stats->time_in_state[-1]= .. */ + if (old_index == -1 || new_index == -1) + goto put_policy; + + if (old_index == new_index) + goto put_policy; + + cpufreq_stats_update(stats); + + stats->last_index = new_index; +#ifdef CONFIG_CPU_FREQ_STAT_DETAILS + stats->trans_table[old_index * stats->max_state + new_index]++; +#endif + stats->total_trans++; + +put_policy: + cpufreq_cpu_put(policy); + return 0; +} + +static struct notifier_block notifier_policy_block = { + .notifier_call = cpufreq_stat_notifier_policy +}; + +static struct notifier_block notifier_trans_block = { + .notifier_call = cpufreq_stat_notifier_trans +}; + +static int __init cpufreq_stats_init(void) +{ + int ret; + unsigned int cpu; + + spin_lock_init(&cpufreq_stats_lock); + ret = cpufreq_register_notifier(¬ifier_policy_block, + CPUFREQ_POLICY_NOTIFIER); + if (ret) + return ret; + + for_each_online_cpu(cpu) + cpufreq_stats_create_table(cpu); + + ret = cpufreq_register_notifier(¬ifier_trans_block, + CPUFREQ_TRANSITION_NOTIFIER); + if (ret) { + cpufreq_unregister_notifier(¬ifier_policy_block, + CPUFREQ_POLICY_NOTIFIER); + for_each_online_cpu(cpu) + cpufreq_stats_free_table(cpu); + return ret; + } + + return 0; +} +static void __exit cpufreq_stats_exit(void) +{ + unsigned int cpu; + + cpufreq_unregister_notifier(¬ifier_policy_block, + CPUFREQ_POLICY_NOTIFIER); + cpufreq_unregister_notifier(¬ifier_trans_block, + CPUFREQ_TRANSITION_NOTIFIER); + for_each_online_cpu(cpu) + cpufreq_stats_free_table(cpu); +} + +MODULE_AUTHOR("Zou Nan hai <nanhai.zou@intel.com>"); +MODULE_DESCRIPTION("Export cpufreq stats via sysfs"); +MODULE_LICENSE("GPL"); + +module_init(cpufreq_stats_init); +module_exit(cpufreq_stats_exit); diff --git a/kernel/drivers/cpufreq/cpufreq_userspace.c b/kernel/drivers/cpufreq/cpufreq_userspace.c new file mode 100644 index 000000000..4dbf1db16 --- /dev/null +++ b/kernel/drivers/cpufreq/cpufreq_userspace.c @@ -0,0 +1,123 @@ + +/* + * linux/drivers/cpufreq/cpufreq_userspace.c + * + * Copyright (C) 2001 Russell King + * (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mutex.h> + +static DEFINE_PER_CPU(unsigned int, cpu_is_managed); +static DEFINE_MUTEX(userspace_mutex); + +/** + * cpufreq_set - set the CPU frequency + * @policy: pointer to policy struct where freq is being set + * @freq: target frequency in kHz + * + * Sets the CPU frequency to freq. + */ +static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) +{ + int ret = -EINVAL; + + pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq); + + mutex_lock(&userspace_mutex); + if (!per_cpu(cpu_is_managed, policy->cpu)) + goto err; + + ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L); + err: + mutex_unlock(&userspace_mutex); + return ret; +} + +static ssize_t show_speed(struct cpufreq_policy *policy, char *buf) +{ + return sprintf(buf, "%u\n", policy->cur); +} + +static int cpufreq_governor_userspace(struct cpufreq_policy *policy, + unsigned int event) +{ + unsigned int cpu = policy->cpu; + int rc = 0; + + switch (event) { + case CPUFREQ_GOV_START: + BUG_ON(!policy->cur); + pr_debug("started managing cpu %u\n", cpu); + + mutex_lock(&userspace_mutex); + per_cpu(cpu_is_managed, cpu) = 1; + mutex_unlock(&userspace_mutex); + break; + case CPUFREQ_GOV_STOP: + pr_debug("managing cpu %u stopped\n", cpu); + + mutex_lock(&userspace_mutex); + per_cpu(cpu_is_managed, cpu) = 0; + mutex_unlock(&userspace_mutex); + break; + case CPUFREQ_GOV_LIMITS: + mutex_lock(&userspace_mutex); + pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n", + cpu, policy->min, policy->max, + policy->cur); + + if (policy->max < policy->cur) + __cpufreq_driver_target(policy, policy->max, + CPUFREQ_RELATION_H); + else if (policy->min > policy->cur) + __cpufreq_driver_target(policy, policy->min, + CPUFREQ_RELATION_L); + mutex_unlock(&userspace_mutex); + break; + } + return rc; +} + +#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE +static +#endif +struct cpufreq_governor cpufreq_gov_userspace = { + .name = "userspace", + .governor = cpufreq_governor_userspace, + .store_setspeed = cpufreq_set, + .show_setspeed = show_speed, + .owner = THIS_MODULE, +}; + +static int __init cpufreq_gov_userspace_init(void) +{ + return cpufreq_register_governor(&cpufreq_gov_userspace); +} + +static void __exit cpufreq_gov_userspace_exit(void) +{ + cpufreq_unregister_governor(&cpufreq_gov_userspace); +} + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>, " + "Russell King <rmk@arm.linux.org.uk>"); +MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE +fs_initcall(cpufreq_gov_userspace_init); +#else +module_init(cpufreq_gov_userspace_init); +#endif +module_exit(cpufreq_gov_userspace_exit); diff --git a/kernel/drivers/cpufreq/cris-artpec3-cpufreq.c b/kernel/drivers/cpufreq/cris-artpec3-cpufreq.c new file mode 100644 index 000000000..601b88c49 --- /dev/null +++ b/kernel/drivers/cpufreq/cris-artpec3-cpufreq.c @@ -0,0 +1,92 @@ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/cpufreq.h> +#include <hwregs/reg_map.h> +#include <hwregs/reg_rdwr.h> +#include <hwregs/clkgen_defs.h> +#include <hwregs/ddr2_defs.h> + +static int +cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data); + +static struct notifier_block cris_sdram_freq_notifier_block = { + .notifier_call = cris_sdram_freq_notifier +}; + +static struct cpufreq_frequency_table cris_freq_table[] = { + {0, 0x01, 6000}, + {0, 0x02, 200000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) +{ + reg_clkgen_rw_clk_ctrl clk_ctrl; + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + return clk_ctrl.pll ? 200000 : 6000; +} + +static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state) +{ + reg_clkgen_rw_clk_ctrl clk_ctrl; + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + + local_irq_disable(); + + /* Even though we may be SMP they will share the same clock + * so all settings are made on CPU0. */ + if (cris_freq_table[state].frequency == 200000) + clk_ctrl.pll = 1; + else + clk_ctrl.pll = 0; + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); + + local_irq_enable(); + + return 0; +} + +static int cris_freq_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, cris_freq_table, 1000000); +} + +static struct cpufreq_driver cris_freq_driver = { + .get = cris_freq_get_cpu_frequency, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cris_freq_target, + .init = cris_freq_cpu_init, + .name = "cris_freq", + .attr = cpufreq_generic_attr, +}; + +static int __init cris_freq_init(void) +{ + int ret; + ret = cpufreq_register_driver(&cris_freq_driver); + cpufreq_register_notifier(&cris_sdram_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + return ret; +} + +static int +cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + int i; + struct cpufreq_freqs *freqs = data; + if (val == CPUFREQ_PRECHANGE) { + reg_ddr2_rw_cfg cfg = + REG_RD(ddr2, regi_ddr2_ctrl, rw_cfg); + cfg.ref_interval = (freqs->new == 200000 ? 1560 : 46); + + if (freqs->new == 200000) + for (i = 0; i < 50000; i++); + REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing); + } + return 0; +} + + +module_init(cris_freq_init); diff --git a/kernel/drivers/cpufreq/cris-etraxfs-cpufreq.c b/kernel/drivers/cpufreq/cris-etraxfs-cpufreq.c new file mode 100644 index 000000000..22b2cdde7 --- /dev/null +++ b/kernel/drivers/cpufreq/cris-etraxfs-cpufreq.c @@ -0,0 +1,91 @@ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/cpufreq.h> +#include <hwregs/reg_map.h> +#include <arch/hwregs/reg_rdwr.h> +#include <arch/hwregs/config_defs.h> +#include <arch/hwregs/bif_core_defs.h> + +static int +cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data); + +static struct notifier_block cris_sdram_freq_notifier_block = { + .notifier_call = cris_sdram_freq_notifier +}; + +static struct cpufreq_frequency_table cris_freq_table[] = { + {0, 0x01, 6000}, + {0, 0x02, 200000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) +{ + reg_config_rw_clk_ctrl clk_ctrl; + clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); + return clk_ctrl.pll ? 200000 : 6000; +} + +static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state) +{ + reg_config_rw_clk_ctrl clk_ctrl; + clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); + + local_irq_disable(); + + /* Even though we may be SMP they will share the same clock + * so all settings are made on CPU0. */ + if (cris_freq_table[state].frequency == 200000) + clk_ctrl.pll = 1; + else + clk_ctrl.pll = 0; + REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); + + local_irq_enable(); + + return 0; +} + +static int cris_freq_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, cris_freq_table, 1000000); +} + +static struct cpufreq_driver cris_freq_driver = { + .get = cris_freq_get_cpu_frequency, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cris_freq_target, + .init = cris_freq_cpu_init, + .name = "cris_freq", + .attr = cpufreq_generic_attr, +}; + +static int __init cris_freq_init(void) +{ + int ret; + ret = cpufreq_register_driver(&cris_freq_driver); + cpufreq_register_notifier(&cris_sdram_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + return ret; +} + +static int +cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + int i; + struct cpufreq_freqs *freqs = data; + if (val == CPUFREQ_PRECHANGE) { + reg_bif_core_rw_sdram_timing timing = + REG_RD(bif_core, regi_bif_core, rw_sdram_timing); + timing.cpd = (freqs->new == 200000 ? 0 : 1); + + if (freqs->new == 200000) + for (i = 0; i < 50000; i++) ; + REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing); + } + return 0; +} + +module_init(cris_freq_init); diff --git a/kernel/drivers/cpufreq/davinci-cpufreq.c b/kernel/drivers/cpufreq/davinci-cpufreq.c new file mode 100644 index 000000000..7e336d20c --- /dev/null +++ b/kernel/drivers/cpufreq/davinci-cpufreq.c @@ -0,0 +1,181 @@ +/* + * CPU frequency scaling for DaVinci + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows: + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Updated to support OMAP3 + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/types.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/export.h> + +#include <mach/hardware.h> +#include <mach/cpufreq.h> +#include <mach/common.h> + +struct davinci_cpufreq { + struct device *dev; + struct clk *armclk; + struct clk *asyncclk; + unsigned long asyncrate; +}; +static struct davinci_cpufreq cpufreq; + +static int davinci_verify_speed(struct cpufreq_policy *policy) +{ + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct cpufreq_frequency_table *freq_table = pdata->freq_table; + struct clk *armclk = cpufreq.armclk; + + if (freq_table) + return cpufreq_frequency_table_verify(policy, freq_table); + + if (policy->cpu) + return -EINVAL; + + cpufreq_verify_within_cpu_limits(policy); + policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000; + policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000; + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + return 0; +} + +static int davinci_target(struct cpufreq_policy *policy, unsigned int idx) +{ + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct clk *armclk = cpufreq.armclk; + unsigned int old_freq, new_freq; + int ret = 0; + + old_freq = policy->cur; + new_freq = pdata->freq_table[idx].frequency; + + /* if moving to higher frequency, up the voltage beforehand */ + if (pdata->set_voltage && new_freq > old_freq) { + ret = pdata->set_voltage(idx); + if (ret) + return ret; + } + + ret = clk_set_rate(armclk, idx); + if (ret) + return ret; + + if (cpufreq.asyncclk) { + ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate); + if (ret) + return ret; + } + + /* if moving to lower freq, lower the voltage after lowering freq */ + if (pdata->set_voltage && new_freq < old_freq) + pdata->set_voltage(idx); + + return 0; +} + +static int davinci_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct cpufreq_frequency_table *freq_table = pdata->freq_table; + + if (policy->cpu != 0) + return -EINVAL; + + /* Finish platform specific initialization */ + if (pdata->init) { + result = pdata->init(); + if (result) + return result; + } + + policy->clk = cpufreq.armclk; + + /* + * Time measurement across the target() function yields ~1500-1800us + * time taken with no drivers on notification list. + * Setting the latency to 2000 us to accommodate addition of drivers + * to pre/post change notification list. + */ + return cpufreq_generic_init(policy, freq_table, 2000 * 1000); +} + +static struct cpufreq_driver davinci_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = davinci_verify_speed, + .target_index = davinci_target, + .get = cpufreq_generic_get, + .init = davinci_cpu_init, + .name = "davinci", + .attr = cpufreq_generic_attr, +}; + +static int __init davinci_cpufreq_probe(struct platform_device *pdev) +{ + struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; + struct clk *asyncclk; + + if (!pdata) + return -EINVAL; + if (!pdata->freq_table) + return -EINVAL; + + cpufreq.dev = &pdev->dev; + + cpufreq.armclk = clk_get(NULL, "arm"); + if (IS_ERR(cpufreq.armclk)) { + dev_err(cpufreq.dev, "Unable to get ARM clock\n"); + return PTR_ERR(cpufreq.armclk); + } + + asyncclk = clk_get(cpufreq.dev, "async"); + if (!IS_ERR(asyncclk)) { + cpufreq.asyncclk = asyncclk; + cpufreq.asyncrate = clk_get_rate(asyncclk); + } + + return cpufreq_register_driver(&davinci_driver); +} + +static int __exit davinci_cpufreq_remove(struct platform_device *pdev) +{ + clk_put(cpufreq.armclk); + + if (cpufreq.asyncclk) + clk_put(cpufreq.asyncclk); + + return cpufreq_unregister_driver(&davinci_driver); +} + +static struct platform_driver davinci_cpufreq_driver = { + .driver = { + .name = "cpufreq-davinci", + }, + .remove = __exit_p(davinci_cpufreq_remove), +}; + +int __init davinci_cpufreq_init(void) +{ + return platform_driver_probe(&davinci_cpufreq_driver, + davinci_cpufreq_probe); +} + diff --git a/kernel/drivers/cpufreq/dbx500-cpufreq.c b/kernel/drivers/cpufreq/dbx500-cpufreq.c new file mode 100644 index 000000000..5c3ec1dd4 --- /dev/null +++ b/kernel/drivers/cpufreq/dbx500-cpufreq.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010-2012 + * + * License Terms: GNU General Public License v2 + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * Author: Martin Persson <martin.persson@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +static struct cpufreq_frequency_table *freq_table; +static struct clk *armss_clk; + +static int dbx500_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + /* update armss clk frequency */ + return clk_set_rate(armss_clk, freq_table[index].frequency * 1000); +} + +static int dbx500_cpufreq_init(struct cpufreq_policy *policy) +{ + policy->clk = armss_clk; + return cpufreq_generic_init(policy, freq_table, 20 * 1000); +} + +static struct cpufreq_driver dbx500_cpufreq_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS | + CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = dbx500_cpufreq_target, + .get = cpufreq_generic_get, + .init = dbx500_cpufreq_init, + .name = "DBX500", + .attr = cpufreq_generic_attr, +}; + +static int dbx500_cpufreq_probe(struct platform_device *pdev) +{ + struct cpufreq_frequency_table *pos; + + freq_table = dev_get_platdata(&pdev->dev); + if (!freq_table) { + pr_err("dbx500-cpufreq: Failed to fetch cpufreq table\n"); + return -ENODEV; + } + + armss_clk = clk_get(&pdev->dev, "armss"); + if (IS_ERR(armss_clk)) { + pr_err("dbx500-cpufreq: Failed to get armss clk\n"); + return PTR_ERR(armss_clk); + } + + pr_info("dbx500-cpufreq: Available frequencies:\n"); + cpufreq_for_each_entry(pos, freq_table) + pr_info(" %d Mhz\n", pos->frequency / 1000); + + return cpufreq_register_driver(&dbx500_cpufreq_driver); +} + +static struct platform_driver dbx500_cpufreq_plat_driver = { + .driver = { + .name = "cpufreq-ux500", + }, + .probe = dbx500_cpufreq_probe, +}; + +static int __init dbx500_cpufreq_register(void) +{ + return platform_driver_register(&dbx500_cpufreq_plat_driver); +} +device_initcall(dbx500_cpufreq_register); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("cpufreq driver for DBX500"); diff --git a/kernel/drivers/cpufreq/e_powersaver.c b/kernel/drivers/cpufreq/e_powersaver.c new file mode 100644 index 000000000..a0d2a423c --- /dev/null +++ b/kernel/drivers/cpufreq/e_powersaver.c @@ -0,0 +1,441 @@ +/* + * Based on documentation provided by Dave Jones. Thanks! + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <linux/delay.h> + +#include <asm/cpu_device_id.h> +#include <asm/msr.h> +#include <asm/tsc.h> + +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#include <linux/acpi.h> +#include <acpi/processor.h> +#endif + +#define EPS_BRAND_C7M 0 +#define EPS_BRAND_C7 1 +#define EPS_BRAND_EDEN 2 +#define EPS_BRAND_C3 3 +#define EPS_BRAND_C7D 4 + +struct eps_cpu_data { + u32 fsb; +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE + u32 bios_limit; +#endif + struct cpufreq_frequency_table freq_table[]; +}; + +static struct eps_cpu_data *eps_cpu[NR_CPUS]; + +/* Module parameters */ +static int freq_failsafe_off; +static int voltage_failsafe_off; +static int set_max_voltage; + +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +static int ignore_acpi_limit; + +static struct acpi_processor_performance *eps_acpi_cpu_perf; + +/* Minimum necessary to get acpi_processor_get_bios_limit() working */ +static int eps_acpi_init(void) +{ + eps_acpi_cpu_perf = kzalloc(sizeof(*eps_acpi_cpu_perf), + GFP_KERNEL); + if (!eps_acpi_cpu_perf) + return -ENOMEM; + + if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map, + GFP_KERNEL)) { + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + return -ENOMEM; + } + + if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) { + free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map); + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + return -EIO; + } + return 0; +} + +static int eps_acpi_exit(struct cpufreq_policy *policy) +{ + if (eps_acpi_cpu_perf) { + acpi_processor_unregister_performance(eps_acpi_cpu_perf, 0); + free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map); + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + } + return 0; +} +#endif + +static unsigned int eps_get(unsigned int cpu) +{ + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (cpu) + return 0; + centaur = eps_cpu[cpu]; + if (centaur == NULL) + return 0; + + /* Return current frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + return centaur->fsb * ((lo >> 8) & 0xff); +} + +static int eps_set_state(struct eps_cpu_data *centaur, + struct cpufreq_policy *policy, + u32 dest_state) +{ + u32 lo, hi; + int i; + + /* Wait while CPU is busy */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i = 0; + while (lo & ((1 << 16) | (1 << 17))) { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + return -ENODEV; + } + } + /* Set new multiplier and voltage */ + wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); + /* Wait until transition end */ + i = 0; + do { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + return -ENODEV; + } + } while (lo & ((1 << 16) | (1 << 17))); + +#ifdef DEBUG + { + u8 current_multiplier, current_voltage; + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + printk(KERN_INFO "eps: Current voltage = %dmV\n", + current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + printk(KERN_INFO "eps: Current multiplier = %d\n", + current_multiplier); + } +#endif + return 0; +} + +static int eps_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct eps_cpu_data *centaur; + unsigned int cpu = policy->cpu; + unsigned int dest_state; + int ret; + + if (unlikely(eps_cpu[cpu] == NULL)) + return -ENODEV; + centaur = eps_cpu[cpu]; + + /* Make frequency transition */ + dest_state = centaur->freq_table[index].driver_data & 0xffff; + ret = eps_set_state(centaur, policy, dest_state); + if (ret) + printk(KERN_ERR "eps: Timeout!\n"); + return ret; +} + +static int eps_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + u32 lo, hi; + u64 val; + u8 current_multiplier, current_voltage; + u8 max_multiplier, max_voltage; + u8 min_multiplier, min_voltage; + u8 brand = 0; + u32 fsb; + struct eps_cpu_data *centaur; + struct cpuinfo_x86 *c = &cpu_data(0); + struct cpufreq_frequency_table *f_table; + int k, step, voltage; + int ret; + int states; +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE + unsigned int limit; +#endif + + if (policy->cpu != 0) + return -ENODEV; + + /* Check brand */ + printk(KERN_INFO "eps: Detected VIA "); + + switch (c->x86_model) { + case 10: + rdmsr(0x1153, lo, hi); + brand = (((lo >> 2) ^ lo) >> 18) & 3; + printk(KERN_CONT "Model A "); + break; + case 13: + rdmsr(0x1154, lo, hi); + brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff; + printk(KERN_CONT "Model D "); + break; + } + + switch (brand) { + case EPS_BRAND_C7M: + printk(KERN_CONT "C7-M\n"); + break; + case EPS_BRAND_C7: + printk(KERN_CONT "C7\n"); + break; + case EPS_BRAND_EDEN: + printk(KERN_CONT "Eden\n"); + break; + case EPS_BRAND_C7D: + printk(KERN_CONT "C7-D\n"); + break; + case EPS_BRAND_C3: + printk(KERN_CONT "C3\n"); + return -ENODEV; + break; + } + /* Enable Enhanced PowerSaver */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { + val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; + wrmsrl(MSR_IA32_MISC_ENABLE, val); + /* Can be locked at 0 */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { + printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n"); + return -ENODEV; + } + } + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + printk(KERN_INFO "eps: Current voltage = %dmV\n", + current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); + + /* Print limits */ + max_voltage = hi & 0xff; + printk(KERN_INFO "eps: Highest voltage = %dmV\n", + max_voltage * 16 + 700); + max_multiplier = (hi >> 8) & 0xff; + printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); + min_voltage = (hi >> 16) & 0xff; + printk(KERN_INFO "eps: Lowest voltage = %dmV\n", + min_voltage * 16 + 700); + min_multiplier = (hi >> 24) & 0xff; + printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); + + /* Sanity checks */ + if (current_multiplier == 0 || max_multiplier == 0 + || min_multiplier == 0) + return -EINVAL; + if (current_multiplier > max_multiplier + || max_multiplier <= min_multiplier) + return -EINVAL; + if (current_voltage > 0x1f || max_voltage > 0x1f) + return -EINVAL; + if (max_voltage < min_voltage + || current_voltage < min_voltage + || current_voltage > max_voltage) + return -EINVAL; + + /* Check for systems using underclocked CPU */ + if (!freq_failsafe_off && max_multiplier != current_multiplier) { + printk(KERN_INFO "eps: Your processor is running at different " + "frequency then its maximum. Aborting.\n"); + printk(KERN_INFO "eps: You can use freq_failsafe_off option " + "to disable this check.\n"); + return -EINVAL; + } + if (!voltage_failsafe_off && max_voltage != current_voltage) { + printk(KERN_INFO "eps: Your processor is running at different " + "voltage then its maximum. Aborting.\n"); + printk(KERN_INFO "eps: You can use voltage_failsafe_off " + "option to disable this check.\n"); + return -EINVAL; + } + + /* Calc FSB speed */ + fsb = cpu_khz / current_multiplier; + +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE + /* Check for ACPI processor speed limit */ + if (!ignore_acpi_limit && !eps_acpi_init()) { + if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) { + printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n", + limit/1000000, + (limit%1000000)/10000); + eps_acpi_exit(policy); + /* Check if max_multiplier is in BIOS limits */ + if (limit && max_multiplier * fsb > limit) { + printk(KERN_INFO "eps: Aborting.\n"); + return -EINVAL; + } + } + } +#endif + + /* Allow user to set lower maximum voltage then that reported + * by processor */ + if (brand == EPS_BRAND_C7M && set_max_voltage) { + u32 v; + + /* Change mV to something hardware can use */ + v = (set_max_voltage - 700) / 16; + /* Check if voltage is within limits */ + if (v >= min_voltage && v <= max_voltage) { + printk(KERN_INFO "eps: Setting %dmV as maximum.\n", + v * 16 + 700); + max_voltage = v; + } + } + + /* Calc number of p-states supported */ + if (brand == EPS_BRAND_C7M) + states = max_multiplier - min_multiplier + 1; + else + states = 2; + + /* Allocate private data and frequency table for current cpu */ + centaur = kzalloc(sizeof(*centaur) + + (states + 1) * sizeof(struct cpufreq_frequency_table), + GFP_KERNEL); + if (!centaur) + return -ENOMEM; + eps_cpu[0] = centaur; + + /* Copy basic values */ + centaur->fsb = fsb; +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE + centaur->bios_limit = limit; +#endif + + /* Fill frequency and MSR value table */ + f_table = ¢aur->freq_table[0]; + if (brand != EPS_BRAND_C7M) { + f_table[0].frequency = fsb * min_multiplier; + f_table[0].driver_data = (min_multiplier << 8) | min_voltage; + f_table[1].frequency = fsb * max_multiplier; + f_table[1].driver_data = (max_multiplier << 8) | max_voltage; + f_table[2].frequency = CPUFREQ_TABLE_END; + } else { + k = 0; + step = ((max_voltage - min_voltage) * 256) + / (max_multiplier - min_multiplier); + for (i = min_multiplier; i <= max_multiplier; i++) { + voltage = (k * step) / 256 + min_voltage; + f_table[k].frequency = fsb * i; + f_table[k].driver_data = (i << 8) | voltage; + k++; + } + f_table[k].frequency = CPUFREQ_TABLE_END; + } + + policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ + + ret = cpufreq_table_validate_and_show(policy, ¢aur->freq_table[0]); + if (ret) { + kfree(centaur); + return ret; + } + + return 0; +} + +static int eps_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + + /* Bye */ + kfree(eps_cpu[cpu]); + eps_cpu[cpu] = NULL; + return 0; +} + +static struct cpufreq_driver eps_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = eps_target, + .init = eps_cpu_init, + .exit = eps_cpu_exit, + .get = eps_get, + .name = "e_powersaver", + .attr = cpufreq_generic_attr, +}; + + +/* This driver will work only on Centaur C7 processors with + * Enhanced SpeedStep/PowerSaver registers */ +static const struct x86_cpu_id eps_cpu_id[] = { + { X86_VENDOR_CENTAUR, 6, X86_MODEL_ANY, X86_FEATURE_EST }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, eps_cpu_id); + +static int __init eps_init(void) +{ + if (!x86_match_cpu(eps_cpu_id) || boot_cpu_data.x86_model < 10) + return -ENODEV; + if (cpufreq_register_driver(&eps_driver)) + return -EINVAL; + return 0; +} + +static void __exit eps_exit(void) +{ + cpufreq_unregister_driver(&eps_driver); +} + +/* Allow user to overclock his machine or to change frequency to higher after + * unloading module */ +module_param(freq_failsafe_off, int, 0644); +MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check"); +module_param(voltage_failsafe_off, int, 0644); +MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check"); +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +module_param(ignore_acpi_limit, int, 0644); +MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit"); +#endif +module_param(set_max_voltage, int, 0644); +MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only"); + +MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>"); +MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); +MODULE_LICENSE("GPL"); + +module_init(eps_init); +module_exit(eps_exit); diff --git a/kernel/drivers/cpufreq/elanfreq.c b/kernel/drivers/cpufreq/elanfreq.c new file mode 100644 index 000000000..1c06e786c --- /dev/null +++ b/kernel/drivers/cpufreq/elanfreq.c @@ -0,0 +1,232 @@ +/* + * elanfreq: cpufreq driver for the AMD ELAN family + * + * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> + * + * Parts of this code are (c) Sven Geggus <sven@geggus.net> + * + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/delay.h> +#include <linux/cpufreq.h> + +#include <asm/cpu_device_id.h> +#include <asm/msr.h> +#include <linux/timex.h> +#include <linux/io.h> + +#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ +#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ + +/* Module parameter */ +static int max_freq; + +struct s_elan_multiplier { + int clock; /* frequency in kHz */ + int val40h; /* PMU Force Mode register */ + int val80h; /* CPU Clock Speed Register */ +}; + +/* + * It is important that the frequencies + * are listed in ascending order here! + */ +static struct s_elan_multiplier elan_multiplier[] = { + {1000, 0x02, 0x18}, + {2000, 0x02, 0x10}, + {4000, 0x02, 0x08}, + {8000, 0x00, 0x00}, + {16000, 0x00, 0x02}, + {33000, 0x00, 0x04}, + {66000, 0x01, 0x04}, + {99000, 0x01, 0x05} +}; + +static struct cpufreq_frequency_table elanfreq_table[] = { + {0, 0, 1000}, + {0, 1, 2000}, + {0, 2, 4000}, + {0, 3, 8000}, + {0, 4, 16000}, + {0, 5, 33000}, + {0, 6, 66000}, + {0, 7, 99000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + + +/** + * elanfreq_get_cpu_frequency: determine current cpu speed + * + * Finds out at which frequency the CPU of the Elan SOC runs + * at the moment. Frequencies from 1 to 33 MHz are generated + * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" + * and have the rest of the chip running with 33 MHz. + */ + +static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg; /* Clock Speed Register */ + + local_irq_disable(); + outb_p(0x80, REG_CSCIR); + clockspeed_reg = inb_p(REG_CSCDR); + local_irq_enable(); + + if ((clockspeed_reg & 0xE0) == 0xE0) + return 0; + + /* Are we in CPU clock multiplied mode (66/99 MHz)? */ + if ((clockspeed_reg & 0xE0) == 0xC0) { + if ((clockspeed_reg & 0x01) == 0) + return 66000; + else + return 99000; + } + + /* 33 MHz is not 32 MHz... */ + if ((clockspeed_reg & 0xE0) == 0xA0) + return 33000; + + return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; +} + + +static int elanfreq_target(struct cpufreq_policy *policy, + unsigned int state) +{ + /* + * Access to the Elan's internal registers is indexed via + * 0x22: Chip Setup & Control Register Index Register (CSCI) + * 0x23: Chip Setup & Control Register Data Register (CSCD) + * + */ + + /* + * 0x40 is the Power Management Unit's Force Mode Register. + * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) + */ + + local_irq_disable(); + outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x00, REG_CSCDR); + local_irq_enable(); /* wait till internal pipelines and */ + udelay(1000); /* buffers have cleaned up */ + + local_irq_disable(); + + /* now, set the CPU clock speed register (0x80) */ + outb_p(0x80, REG_CSCIR); + outb_p(elan_multiplier[state].val80h, REG_CSCDR); + + /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ + outb_p(0x40, REG_CSCIR); + outb_p(elan_multiplier[state].val40h, REG_CSCDR); + udelay(10000); + local_irq_enable(); + + return 0; +} +/* + * Module init and exit code + */ + +static int elanfreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + struct cpufreq_frequency_table *pos; + + /* capability check */ + if ((c->x86_vendor != X86_VENDOR_AMD) || + (c->x86 != 4) || (c->x86_model != 10)) + return -ENODEV; + + /* max freq */ + if (!max_freq) + max_freq = elanfreq_get_cpu_frequency(0); + + /* table init */ + cpufreq_for_each_entry(pos, elanfreq_table) + if (pos->frequency > max_freq) + pos->frequency = CPUFREQ_ENTRY_INVALID; + + /* cpuinfo and default policy values */ + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + + return cpufreq_table_validate_and_show(policy, elanfreq_table); +} + + +#ifndef MODULE +/** + * elanfreq_setup - elanfreq command line parameter parsing + * + * elanfreq command line parameter. Use: + * elanfreq=66000 + * to set the maximum CPU frequency to 66 MHz. Note that in + * case you do not give this boot parameter, the maximum + * frequency will fall back to _current_ CPU frequency which + * might be lower. If you build this as a module, use the + * max_freq module parameter instead. + */ +static int __init elanfreq_setup(char *str) +{ + max_freq = simple_strtoul(str, &str, 0); + printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); + return 1; +} +__setup("elanfreq=", elanfreq_setup); +#endif + + +static struct cpufreq_driver elanfreq_driver = { + .get = elanfreq_get_cpu_frequency, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = elanfreq_target, + .init = elanfreq_cpu_init, + .name = "elanfreq", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id elan_id[] = { + { X86_VENDOR_AMD, 4, 10, }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, elan_id); + +static int __init elanfreq_init(void) +{ + if (!x86_match_cpu(elan_id)) + return -ENODEV; + return cpufreq_register_driver(&elanfreq_driver); +} + + +static void __exit elanfreq_exit(void) +{ + cpufreq_unregister_driver(&elanfreq_driver); +} + + +module_param(max_freq, int, 0444); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, " + "Sven Geggus <sven@geggus.net>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); + +module_init(elanfreq_init); +module_exit(elanfreq_exit); diff --git a/kernel/drivers/cpufreq/exynos-cpufreq.c b/kernel/drivers/cpufreq/exynos-cpufreq.c new file mode 100644 index 000000000..82d2fbb20 --- /dev/null +++ b/kernel/drivers/cpufreq/exynos-cpufreq.c @@ -0,0 +1,239 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - CPU frequency scaling support for EXYNOS series + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/cpufreq.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/cpu_cooling.h> +#include <linux/cpu.h> + +#include "exynos-cpufreq.h" + +static struct exynos_dvfs_info *exynos_info; +static struct thermal_cooling_device *cdev; +static struct regulator *arm_regulator; +static unsigned int locking_frequency; + +static int exynos_cpufreq_get_index(unsigned int freq) +{ + struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; + struct cpufreq_frequency_table *pos; + + cpufreq_for_each_entry(pos, freq_table) + if (pos->frequency == freq) + break; + + if (pos->frequency == CPUFREQ_TABLE_END) + return -EINVAL; + + return pos - freq_table; +} + +static int exynos_cpufreq_scale(unsigned int target_freq) +{ + struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; + unsigned int *volt_table = exynos_info->volt_table; + struct cpufreq_policy *policy = cpufreq_cpu_get(0); + unsigned int arm_volt, safe_arm_volt = 0; + unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz; + struct device *dev = exynos_info->dev; + unsigned int old_freq; + int index, old_index; + int ret = 0; + + old_freq = policy->cur; + + /* + * The policy max have been changed so that we cannot get proper + * old_index with cpufreq_frequency_table_target(). Thus, ignore + * policy and get the index from the raw frequency table. + */ + old_index = exynos_cpufreq_get_index(old_freq); + if (old_index < 0) { + ret = old_index; + goto out; + } + + index = exynos_cpufreq_get_index(target_freq); + if (index < 0) { + ret = index; + goto out; + } + + /* + * ARM clock source will be changed APLL to MPLL temporary + * To support this level, need to control regulator for + * required voltage level + */ + if (exynos_info->need_apll_change != NULL) { + if (exynos_info->need_apll_change(old_index, index) && + (freq_table[index].frequency < mpll_freq_khz) && + (freq_table[old_index].frequency < mpll_freq_khz)) + safe_arm_volt = volt_table[exynos_info->pll_safe_idx]; + } + arm_volt = volt_table[index]; + + /* When the new frequency is higher than current frequency */ + if ((target_freq > old_freq) && !safe_arm_volt) { + /* Firstly, voltage up to increase frequency */ + ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + if (ret) { + dev_err(dev, "failed to set cpu voltage to %d\n", + arm_volt); + return ret; + } + } + + if (safe_arm_volt) { + ret = regulator_set_voltage(arm_regulator, safe_arm_volt, + safe_arm_volt); + if (ret) { + dev_err(dev, "failed to set cpu voltage to %d\n", + safe_arm_volt); + return ret; + } + } + + exynos_info->set_freq(old_index, index); + + /* When the new frequency is lower than current frequency */ + if ((target_freq < old_freq) || + ((target_freq > old_freq) && safe_arm_volt)) { + /* down the voltage after frequency change */ + ret = regulator_set_voltage(arm_regulator, arm_volt, + arm_volt); + if (ret) { + dev_err(dev, "failed to set cpu voltage to %d\n", + arm_volt); + goto out; + } + } + +out: + cpufreq_cpu_put(policy); + + return ret; +} + +static int exynos_target(struct cpufreq_policy *policy, unsigned int index) +{ + return exynos_cpufreq_scale(exynos_info->freq_table[index].frequency); +} + +static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->clk = exynos_info->cpu_clk; + policy->suspend_freq = locking_frequency; + return cpufreq_generic_init(policy, exynos_info->freq_table, 100000); +} + +static struct cpufreq_driver exynos_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = exynos_target, + .get = cpufreq_generic_get, + .init = exynos_cpufreq_cpu_init, + .name = "exynos_cpufreq", + .attr = cpufreq_generic_attr, +#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW + .boost_supported = true, +#endif +#ifdef CONFIG_PM + .suspend = cpufreq_generic_suspend, +#endif +}; + +static int exynos_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *cpu0; + int ret = -EINVAL; + + exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL); + if (!exynos_info) + return -ENOMEM; + + exynos_info->dev = &pdev->dev; + + if (of_machine_is_compatible("samsung,exynos4210")) { + exynos_info->type = EXYNOS_SOC_4210; + ret = exynos4210_cpufreq_init(exynos_info); + } else if (of_machine_is_compatible("samsung,exynos4212")) { + exynos_info->type = EXYNOS_SOC_4212; + ret = exynos4x12_cpufreq_init(exynos_info); + } else if (of_machine_is_compatible("samsung,exynos4412")) { + exynos_info->type = EXYNOS_SOC_4412; + ret = exynos4x12_cpufreq_init(exynos_info); + } else if (of_machine_is_compatible("samsung,exynos5250")) { + exynos_info->type = EXYNOS_SOC_5250; + ret = exynos5250_cpufreq_init(exynos_info); + } else { + pr_err("%s: Unknown SoC type\n", __func__); + return -ENODEV; + } + + if (ret) + goto err_vdd_arm; + + if (exynos_info->set_freq == NULL) { + dev_err(&pdev->dev, "No set_freq function (ERR)\n"); + goto err_vdd_arm; + } + + arm_regulator = regulator_get(NULL, "vdd_arm"); + if (IS_ERR(arm_regulator)) { + dev_err(&pdev->dev, "failed to get resource vdd_arm\n"); + goto err_vdd_arm; + } + + /* Done here as we want to capture boot frequency */ + locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000; + + ret = cpufreq_register_driver(&exynos_driver); + if (ret) + goto err_cpufreq_reg; + + cpu0 = of_get_cpu_node(0, NULL); + if (!cpu0) { + pr_err("failed to find cpu0 node\n"); + return 0; + } + + if (of_find_property(cpu0, "#cooling-cells", NULL)) { + cdev = of_cpufreq_cooling_register(cpu0, + cpu_present_mask); + if (IS_ERR(cdev)) + pr_err("running cpufreq without cooling device: %ld\n", + PTR_ERR(cdev)); + } + + return 0; + +err_cpufreq_reg: + dev_err(&pdev->dev, "failed to register cpufreq driver\n"); + regulator_put(arm_regulator); +err_vdd_arm: + kfree(exynos_info); + return -EINVAL; +} + +static struct platform_driver exynos_cpufreq_platdrv = { + .driver = { + .name = "exynos-cpufreq", + }, + .probe = exynos_cpufreq_probe, +}; +module_platform_driver(exynos_cpufreq_platdrv); diff --git a/kernel/drivers/cpufreq/exynos-cpufreq.h b/kernel/drivers/cpufreq/exynos-cpufreq.h new file mode 100644 index 000000000..9f2062a7c --- /dev/null +++ b/kernel/drivers/cpufreq/exynos-cpufreq.h @@ -0,0 +1,98 @@ +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - CPUFreq support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +enum cpufreq_level_index { + L0, L1, L2, L3, L4, + L5, L6, L7, L8, L9, + L10, L11, L12, L13, L14, + L15, L16, L17, L18, L19, + L20, +}; + +enum exynos_soc_type { + EXYNOS_SOC_4210, + EXYNOS_SOC_4212, + EXYNOS_SOC_4412, + EXYNOS_SOC_5250, +}; + +#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \ + { \ + .freq = (f) * 1000, \ + .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \ + (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \ + .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \ + .mps = ((m) << 16 | (p) << 8 | (s)), \ + } + +struct apll_freq { + unsigned int freq; + u32 clk_div_cpu0; + u32 clk_div_cpu1; + u32 mps; +}; + +struct exynos_dvfs_info { + enum exynos_soc_type type; + struct device *dev; + unsigned long mpll_freq_khz; + unsigned int pll_safe_idx; + struct clk *cpu_clk; + unsigned int *volt_table; + struct cpufreq_frequency_table *freq_table; + void (*set_freq)(unsigned int, unsigned int); + bool (*need_apll_change)(unsigned int, unsigned int); + void __iomem *cmu_regs; +}; + +#ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ +extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *); +#else +static inline int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) +{ + return -EOPNOTSUPP; +} +#endif +#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ +extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *); +#else +static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) +{ + return -EOPNOTSUPP; +} +#endif +#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ +extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *); +#else +static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) +{ + return -EOPNOTSUPP; +} +#endif + +#define EXYNOS4_CLKSRC_CPU 0x14200 +#define EXYNOS4_CLKMUX_STATCPU 0x14400 + +#define EXYNOS4_CLKDIV_CPU 0x14500 +#define EXYNOS4_CLKDIV_CPU1 0x14504 +#define EXYNOS4_CLKDIV_STATCPU 0x14600 +#define EXYNOS4_CLKDIV_STATCPU1 0x14604 + +#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16) +#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT) + +#define EXYNOS5_APLL_LOCK 0x00000 +#define EXYNOS5_APLL_CON0 0x00100 +#define EXYNOS5_CLKMUX_STATCPU 0x00400 +#define EXYNOS5_CLKDIV_CPU0 0x00500 +#define EXYNOS5_CLKDIV_CPU1 0x00504 +#define EXYNOS5_CLKDIV_STATCPU0 0x00600 +#define EXYNOS5_CLKDIV_STATCPU1 0x00604 diff --git a/kernel/drivers/cpufreq/exynos4210-cpufreq.c b/kernel/drivers/cpufreq/exynos4210-cpufreq.c new file mode 100644 index 000000000..843ec824f --- /dev/null +++ b/kernel/drivers/cpufreq/exynos4210-cpufreq.c @@ -0,0 +1,184 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "exynos-cpufreq.h" + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; +static struct exynos_dvfs_info *cpufreq; + +static unsigned int exynos4210_volt_table[] = { + 1250000, 1150000, 1050000, 975000, 950000, +}; + +static struct cpufreq_frequency_table exynos4210_freq_table[] = { + {0, L0, 1200 * 1000}, + {0, L1, 1000 * 1000}, + {0, L2, 800 * 1000}, + {0, L3, 500 * 1000}, + {0, L4, 200 * 1000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static struct apll_freq apll_freq_4210[] = { + /* + * values: + * freq + * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED + * clock divider for COPY, HPM, RESERVED + * PLL M, P, S + */ + APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1), + APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1), + APLL_FREQ(800, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1), + APLL_FREQ(500, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2), + APLL_FREQ(200, 0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3), +}; + +static void exynos4210_set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = apll_freq_4210[div_index].clk_div_cpu0; + + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU); + + do { + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU); + } while (tmp & 0x1111111); + + /* Change Divider - CPU1 */ + + tmp = apll_freq_4210[div_index].clk_div_cpu1; + + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1); + + do { + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1); + } while (tmp & 0x11); +} + +static void exynos4210_set_apll(unsigned int index) +{ + unsigned int tmp, freq = apll_freq_4210[index].freq; + + /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU) + >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + clk_set_rate(mout_apll, freq * 1000); + + /* MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU); + tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); +} + +static void exynos4210_set_frequency(unsigned int old_index, + unsigned int new_index) +{ + if (old_index > new_index) { + exynos4210_set_clkdiv(new_index); + exynos4210_set_apll(new_index); + } else if (old_index < new_index) { + exynos4210_set_apll(new_index); + exynos4210_set_clkdiv(new_index); + } +} + +int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) +{ + struct device_node *np; + unsigned long rate; + + /* + * HACK: This is a temporary workaround to get access to clock + * controller registers directly and remove static mappings and + * dependencies on platform headers. It is necessary to enable + * Exynos multi-platform support and will be removed together with + * this whole driver as soon as Exynos gets migrated to use + * cpufreq-dt driver. + */ + np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock"); + if (!np) { + pr_err("%s: failed to find clock controller DT node\n", + __func__); + return -ENODEV; + } + + info->cmu_regs = of_iomap(np, 0); + if (!info->cmu_regs) { + pr_err("%s: failed to map CMU registers\n", __func__); + return -EFAULT; + } + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "moutcore"); + if (IS_ERR(moutcore)) + goto err_moutcore; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto err_mout_mpll; + + rate = clk_get_rate(mout_mpll) / 1000; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto err_mout_apll; + + info->mpll_freq_khz = rate; + /* 800Mhz */ + info->pll_safe_idx = L2; + info->cpu_clk = cpu_clk; + info->volt_table = exynos4210_volt_table; + info->freq_table = exynos4210_freq_table; + info->set_freq = exynos4210_set_frequency; + + cpufreq = info; + + return 0; + +err_mout_apll: + clk_put(mout_mpll); +err_mout_mpll: + clk_put(moutcore); +err_moutcore: + clk_put(cpu_clk); + + pr_debug("%s: failed initialization\n", __func__); + return -EINVAL; +} diff --git a/kernel/drivers/cpufreq/exynos4x12-cpufreq.c b/kernel/drivers/cpufreq/exynos4x12-cpufreq.c new file mode 100644 index 000000000..9e78a850e --- /dev/null +++ b/kernel/drivers/cpufreq/exynos4x12-cpufreq.c @@ -0,0 +1,236 @@ +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4X12 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "exynos-cpufreq.h" + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; +static struct exynos_dvfs_info *cpufreq; + +static unsigned int exynos4x12_volt_table[] = { + 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500, + 1000000, 987500, 975000, 950000, 925000, 900000, 900000 +}; + +static struct cpufreq_frequency_table exynos4x12_freq_table[] = { + {CPUFREQ_BOOST_FREQ, L0, 1500 * 1000}, + {0, L1, 1400 * 1000}, + {0, L2, 1300 * 1000}, + {0, L3, 1200 * 1000}, + {0, L4, 1100 * 1000}, + {0, L5, 1000 * 1000}, + {0, L6, 900 * 1000}, + {0, L7, 800 * 1000}, + {0, L8, 700 * 1000}, + {0, L9, 600 * 1000}, + {0, L10, 500 * 1000}, + {0, L11, 400 * 1000}, + {0, L12, 300 * 1000}, + {0, L13, 200 * 1000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static struct apll_freq *apll_freq_4x12; + +static struct apll_freq apll_freq_4212[] = { + /* + * values: + * freq + * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2 + * clock divider for COPY, HPM, RESERVED + * PLL M, P, S + */ + APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0), + APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0), + APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0), + APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0), + APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0), + APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0), + APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0), + APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0), + APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1), + APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1), + APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1), + APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1), + APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2), + APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2), +}; + +static struct apll_freq apll_freq_4412[] = { + /* + * values: + * freq + * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2 + * clock divider for COPY, HPM, CORES + * PLL M, P, S + */ + APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0), + APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0), + APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0), + APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0), + APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0), + APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0), + APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0), + APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0), + APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1), + APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1), + APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1), + APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1), + APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2), + APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2), +}; + +static void exynos4x12_set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = apll_freq_4x12[div_index].clk_div_cpu0; + + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU); + + while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU) + & 0x11111111) + cpu_relax(); + + /* Change Divider - CPU1 */ + tmp = apll_freq_4x12[div_index].clk_div_cpu1; + + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1); + + do { + cpu_relax(); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1); + } while (tmp != 0x0); +} + +static void exynos4x12_set_apll(unsigned int index) +{ + unsigned int tmp, freq = apll_freq_4x12[index].freq; + + /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + cpu_relax(); + tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU) + >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + clk_set_rate(mout_apll, freq * 1000); + + /* MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + cpu_relax(); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU); + tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); +} + +static void exynos4x12_set_frequency(unsigned int old_index, + unsigned int new_index) +{ + if (old_index > new_index) { + exynos4x12_set_clkdiv(new_index); + exynos4x12_set_apll(new_index); + } else if (old_index < new_index) { + exynos4x12_set_apll(new_index); + exynos4x12_set_clkdiv(new_index); + } +} + +int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) +{ + struct device_node *np; + unsigned long rate; + + /* + * HACK: This is a temporary workaround to get access to clock + * controller registers directly and remove static mappings and + * dependencies on platform headers. It is necessary to enable + * Exynos multi-platform support and will be removed together with + * this whole driver as soon as Exynos gets migrated to use + * cpufreq-dt driver. + */ + np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock"); + if (!np) { + pr_err("%s: failed to find clock controller DT node\n", + __func__); + return -ENODEV; + } + + info->cmu_regs = of_iomap(np, 0); + if (!info->cmu_regs) { + pr_err("%s: failed to map CMU registers\n", __func__); + return -EFAULT; + } + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "moutcore"); + if (IS_ERR(moutcore)) + goto err_moutcore; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto err_mout_mpll; + + rate = clk_get_rate(mout_mpll) / 1000; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto err_mout_apll; + + if (info->type == EXYNOS_SOC_4212) + apll_freq_4x12 = apll_freq_4212; + else + apll_freq_4x12 = apll_freq_4412; + + info->mpll_freq_khz = rate; + /* 800Mhz */ + info->pll_safe_idx = L7; + info->cpu_clk = cpu_clk; + info->volt_table = exynos4x12_volt_table; + info->freq_table = exynos4x12_freq_table; + info->set_freq = exynos4x12_set_frequency; + + cpufreq = info; + + return 0; + +err_mout_apll: + clk_put(mout_mpll); +err_mout_mpll: + clk_put(moutcore); +err_moutcore: + clk_put(cpu_clk); + + pr_debug("%s: failed initialization\n", __func__); + return -EINVAL; +} diff --git a/kernel/drivers/cpufreq/exynos5250-cpufreq.c b/kernel/drivers/cpufreq/exynos5250-cpufreq.c new file mode 100644 index 000000000..3eafdc7ba --- /dev/null +++ b/kernel/drivers/cpufreq/exynos5250-cpufreq.c @@ -0,0 +1,210 @@ +/* + * Copyright (c) 2010-20122Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS5250 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "exynos-cpufreq.h" + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; +static struct exynos_dvfs_info *cpufreq; + +static unsigned int exynos5250_volt_table[] = { + 1300000, 1250000, 1225000, 1200000, 1150000, + 1125000, 1100000, 1075000, 1050000, 1025000, + 1012500, 1000000, 975000, 950000, 937500, + 925000 +}; + +static struct cpufreq_frequency_table exynos5250_freq_table[] = { + {0, L0, 1700 * 1000}, + {0, L1, 1600 * 1000}, + {0, L2, 1500 * 1000}, + {0, L3, 1400 * 1000}, + {0, L4, 1300 * 1000}, + {0, L5, 1200 * 1000}, + {0, L6, 1100 * 1000}, + {0, L7, 1000 * 1000}, + {0, L8, 900 * 1000}, + {0, L9, 800 * 1000}, + {0, L10, 700 * 1000}, + {0, L11, 600 * 1000}, + {0, L12, 500 * 1000}, + {0, L13, 400 * 1000}, + {0, L14, 300 * 1000}, + {0, L15, 200 * 1000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static struct apll_freq apll_freq_5250[] = { + /* + * values: + * freq + * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 + * clock divider for COPY, HPM, RESERVED + * PLL M, P, S + */ + APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0), + APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0), + APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0), + APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0), + APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0), + APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0), + APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0), + APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0), + APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0), + APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0), + APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1), + APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1), + APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1), + APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1), + APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2), + APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2), +}; + +static void set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = apll_freq_5250[div_index].clk_div_cpu0; + + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0); + + while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0) + & 0x11111111) + cpu_relax(); + + /* Change Divider - CPU1 */ + tmp = apll_freq_5250[div_index].clk_div_cpu1; + + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1); + + while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11) + cpu_relax(); +} + +static void set_apll(unsigned int index) +{ + unsigned int tmp; + unsigned int freq = apll_freq_5250[index].freq; + + /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + cpu_relax(); + tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU) + >> 16); + tmp &= 0x7; + } while (tmp != 0x2); + + clk_set_rate(mout_apll, freq * 1000); + + /* MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + cpu_relax(); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU); + tmp &= (0x7 << 16); + } while (tmp != (0x1 << 16)); +} + +static void exynos5250_set_frequency(unsigned int old_index, + unsigned int new_index) +{ + if (old_index > new_index) { + set_clkdiv(new_index); + set_apll(new_index); + } else if (old_index < new_index) { + set_apll(new_index); + set_clkdiv(new_index); + } +} + +int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) +{ + struct device_node *np; + unsigned long rate; + + /* + * HACK: This is a temporary workaround to get access to clock + * controller registers directly and remove static mappings and + * dependencies on platform headers. It is necessary to enable + * Exynos multi-platform support and will be removed together with + * this whole driver as soon as Exynos gets migrated to use + * cpufreq-dt driver. + */ + np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock"); + if (!np) { + pr_err("%s: failed to find clock controller DT node\n", + __func__); + return -ENODEV; + } + + info->cmu_regs = of_iomap(np, 0); + if (!info->cmu_regs) { + pr_err("%s: failed to map CMU registers\n", __func__); + return -EFAULT; + } + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "mout_cpu"); + if (IS_ERR(moutcore)) + goto err_moutcore; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto err_mout_mpll; + + rate = clk_get_rate(mout_mpll) / 1000; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto err_mout_apll; + + info->mpll_freq_khz = rate; + /* 800Mhz */ + info->pll_safe_idx = L9; + info->cpu_clk = cpu_clk; + info->volt_table = exynos5250_volt_table; + info->freq_table = exynos5250_freq_table; + info->set_freq = exynos5250_set_frequency; + + cpufreq = info; + + return 0; + +err_mout_apll: + clk_put(mout_mpll); +err_mout_mpll: + clk_put(moutcore); +err_moutcore: + clk_put(cpu_clk); + + pr_err("%s: failed initialization\n", __func__); + return -EINVAL; +} diff --git a/kernel/drivers/cpufreq/exynos5440-cpufreq.c b/kernel/drivers/cpufreq/exynos5440-cpufreq.c new file mode 100644 index 000000000..21a90ed7f --- /dev/null +++ b/kernel/drivers/cpufreq/exynos5440-cpufreq.c @@ -0,0 +1,454 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Amit Daniel Kachhap <amit.daniel@samsung.com> + * + * EXYNOS5440 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +/* Register definitions */ +#define XMU_DVFS_CTRL 0x0060 +#define XMU_PMU_P0_7 0x0064 +#define XMU_C0_3_PSTATE 0x0090 +#define XMU_P_LIMIT 0x00a0 +#define XMU_P_STATUS 0x00a4 +#define XMU_PMUEVTEN 0x00d0 +#define XMU_PMUIRQEN 0x00d4 +#define XMU_PMUIRQ 0x00d8 + +/* PMU mask and shift definations */ +#define P_VALUE_MASK 0x7 + +#define XMU_DVFS_CTRL_EN_SHIFT 0 + +#define P0_7_CPUCLKDEV_SHIFT 21 +#define P0_7_CPUCLKDEV_MASK 0x7 +#define P0_7_ATBCLKDEV_SHIFT 18 +#define P0_7_ATBCLKDEV_MASK 0x7 +#define P0_7_CSCLKDEV_SHIFT 15 +#define P0_7_CSCLKDEV_MASK 0x7 +#define P0_7_CPUEMA_SHIFT 28 +#define P0_7_CPUEMA_MASK 0xf +#define P0_7_L2EMA_SHIFT 24 +#define P0_7_L2EMA_MASK 0xf +#define P0_7_VDD_SHIFT 8 +#define P0_7_VDD_MASK 0x7f +#define P0_7_FREQ_SHIFT 0 +#define P0_7_FREQ_MASK 0xff + +#define C0_3_PSTATE_VALID_SHIFT 8 +#define C0_3_PSTATE_CURR_SHIFT 4 +#define C0_3_PSTATE_NEW_SHIFT 0 + +#define PSTATE_CHANGED_EVTEN_SHIFT 0 + +#define PSTATE_CHANGED_IRQEN_SHIFT 0 + +#define PSTATE_CHANGED_SHIFT 0 + +/* some constant values for clock divider calculation */ +#define CPU_DIV_FREQ_MAX 500 +#define CPU_DBG_FREQ_MAX 375 +#define CPU_ATB_FREQ_MAX 500 + +#define PMIC_LOW_VOLT 0x30 +#define PMIC_HIGH_VOLT 0x28 + +#define CPUEMA_HIGH 0x2 +#define CPUEMA_MID 0x4 +#define CPUEMA_LOW 0x7 + +#define L2EMA_HIGH 0x1 +#define L2EMA_MID 0x3 +#define L2EMA_LOW 0x4 + +#define DIV_TAB_MAX 2 +/* frequency unit is 20MHZ */ +#define FREQ_UNIT 20 +#define MAX_VOLTAGE 1550000 /* In microvolt */ +#define VOLTAGE_STEP 12500 /* In microvolt */ + +#define CPUFREQ_NAME "exynos5440_dvfs" +#define DEF_TRANS_LATENCY 100000 + +enum cpufreq_level_index { + L0, L1, L2, L3, L4, + L5, L6, L7, L8, L9, +}; +#define CPUFREQ_LEVEL_END (L7 + 1) + +struct exynos_dvfs_data { + void __iomem *base; + struct resource *mem; + int irq; + struct clk *cpu_clk; + unsigned int latency; + struct cpufreq_frequency_table *freq_table; + unsigned int freq_count; + struct device *dev; + bool dvfs_enabled; + struct work_struct irq_work; +}; + +static struct exynos_dvfs_data *dvfs_info; +static DEFINE_MUTEX(cpufreq_lock); +static struct cpufreq_freqs freqs; + +static int init_div_table(void) +{ + struct cpufreq_frequency_table *pos, *freq_tbl = dvfs_info->freq_table; + unsigned int tmp, clk_div, ema_div, freq, volt_id; + struct dev_pm_opp *opp; + + rcu_read_lock(); + cpufreq_for_each_entry(pos, freq_tbl) { + opp = dev_pm_opp_find_freq_exact(dvfs_info->dev, + pos->frequency * 1000, true); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(dvfs_info->dev, + "failed to find valid OPP for %u KHZ\n", + pos->frequency); + return PTR_ERR(opp); + } + + freq = pos->frequency / 1000; /* In MHZ */ + clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK) + << P0_7_CPUCLKDEV_SHIFT; + clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK) + << P0_7_ATBCLKDEV_SHIFT; + clk_div |= ((freq / CPU_DBG_FREQ_MAX) & P0_7_CSCLKDEV_MASK) + << P0_7_CSCLKDEV_SHIFT; + + /* Calculate EMA */ + volt_id = dev_pm_opp_get_voltage(opp); + volt_id = (MAX_VOLTAGE - volt_id) / VOLTAGE_STEP; + if (volt_id < PMIC_HIGH_VOLT) { + ema_div = (CPUEMA_HIGH << P0_7_CPUEMA_SHIFT) | + (L2EMA_HIGH << P0_7_L2EMA_SHIFT); + } else if (volt_id > PMIC_LOW_VOLT) { + ema_div = (CPUEMA_LOW << P0_7_CPUEMA_SHIFT) | + (L2EMA_LOW << P0_7_L2EMA_SHIFT); + } else { + ema_div = (CPUEMA_MID << P0_7_CPUEMA_SHIFT) | + (L2EMA_MID << P0_7_L2EMA_SHIFT); + } + + tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT) + | ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT)); + + __raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 * + (pos - freq_tbl)); + } + + rcu_read_unlock(); + return 0; +} + +static void exynos_enable_dvfs(unsigned int cur_frequency) +{ + unsigned int tmp, cpu; + struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table; + struct cpufreq_frequency_table *pos; + /* Disable DVFS */ + __raw_writel(0, dvfs_info->base + XMU_DVFS_CTRL); + + /* Enable PSTATE Change Event */ + tmp = __raw_readl(dvfs_info->base + XMU_PMUEVTEN); + tmp |= (1 << PSTATE_CHANGED_EVTEN_SHIFT); + __raw_writel(tmp, dvfs_info->base + XMU_PMUEVTEN); + + /* Enable PSTATE Change IRQ */ + tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQEN); + tmp |= (1 << PSTATE_CHANGED_IRQEN_SHIFT); + __raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN); + + /* Set initial performance index */ + cpufreq_for_each_entry(pos, freq_table) + if (pos->frequency == cur_frequency) + break; + + if (pos->frequency == CPUFREQ_TABLE_END) { + dev_crit(dvfs_info->dev, "Boot up frequency not supported\n"); + /* Assign the highest frequency */ + pos = freq_table; + cur_frequency = pos->frequency; + } + + dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ", + cur_frequency); + + for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) { + tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4); + tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT); + tmp |= ((pos - freq_table) << C0_3_PSTATE_NEW_SHIFT); + __raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4); + } + + /* Enable DVFS */ + __raw_writel(1 << XMU_DVFS_CTRL_EN_SHIFT, + dvfs_info->base + XMU_DVFS_CTRL); +} + +static int exynos_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int tmp; + int i; + struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table; + + mutex_lock(&cpufreq_lock); + + freqs.old = policy->cur; + freqs.new = freq_table[index].frequency; + + cpufreq_freq_transition_begin(policy, &freqs); + + /* Set the target frequency in all C0_3_PSTATE register */ + for_each_cpu(i, policy->cpus) { + tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + i * 4); + tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT); + tmp |= (index << C0_3_PSTATE_NEW_SHIFT); + + __raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + i * 4); + } + mutex_unlock(&cpufreq_lock); + return 0; +} + +static void exynos_cpufreq_work(struct work_struct *work) +{ + unsigned int cur_pstate, index; + struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */ + struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table; + + /* Ensure we can access cpufreq structures */ + if (unlikely(dvfs_info->dvfs_enabled == false)) + goto skip_work; + + mutex_lock(&cpufreq_lock); + freqs.old = policy->cur; + + cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS); + if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1) + index = (cur_pstate >> C0_3_PSTATE_CURR_SHIFT) & P_VALUE_MASK; + else + index = (cur_pstate >> C0_3_PSTATE_NEW_SHIFT) & P_VALUE_MASK; + + if (likely(index < dvfs_info->freq_count)) { + freqs.new = freq_table[index].frequency; + } else { + dev_crit(dvfs_info->dev, "New frequency out of range\n"); + freqs.new = freqs.old; + } + cpufreq_freq_transition_end(policy, &freqs, 0); + + cpufreq_cpu_put(policy); + mutex_unlock(&cpufreq_lock); +skip_work: + enable_irq(dvfs_info->irq); +} + +static irqreturn_t exynos_cpufreq_irq(int irq, void *id) +{ + unsigned int tmp; + + tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQ); + if (tmp >> PSTATE_CHANGED_SHIFT & 0x1) { + __raw_writel(tmp, dvfs_info->base + XMU_PMUIRQ); + disable_irq_nosync(irq); + schedule_work(&dvfs_info->irq_work); + } + return IRQ_HANDLED; +} + +static void exynos_sort_descend_freq_table(void) +{ + struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table; + int i = 0, index; + unsigned int tmp_freq; + /* + * Exynos5440 clock controller state logic expects the cpufreq table to + * be in descending order. But the OPP library constructs the table in + * ascending order. So to make the table descending we just need to + * swap the i element with the N - i element. + */ + for (i = 0; i < dvfs_info->freq_count / 2; i++) { + index = dvfs_info->freq_count - i - 1; + tmp_freq = freq_tbl[i].frequency; + freq_tbl[i].frequency = freq_tbl[index].frequency; + freq_tbl[index].frequency = tmp_freq; + } +} + +static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->clk = dvfs_info->cpu_clk; + return cpufreq_generic_init(policy, dvfs_info->freq_table, + dvfs_info->latency); +} + +static struct cpufreq_driver exynos_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_ASYNC_NOTIFICATION | + CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = exynos_target, + .get = cpufreq_generic_get, + .init = exynos_cpufreq_cpu_init, + .name = CPUFREQ_NAME, + .attr = cpufreq_generic_attr, +}; + +static const struct of_device_id exynos_cpufreq_match[] = { + { + .compatible = "samsung,exynos5440-cpufreq", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_cpufreq_match); + +static int exynos_cpufreq_probe(struct platform_device *pdev) +{ + int ret = -EINVAL; + struct device_node *np; + struct resource res; + unsigned int cur_frequency; + + np = pdev->dev.of_node; + if (!np) + return -ENODEV; + + dvfs_info = devm_kzalloc(&pdev->dev, sizeof(*dvfs_info), GFP_KERNEL); + if (!dvfs_info) { + ret = -ENOMEM; + goto err_put_node; + } + + dvfs_info->dev = &pdev->dev; + + ret = of_address_to_resource(np, 0, &res); + if (ret) + goto err_put_node; + + dvfs_info->base = devm_ioremap_resource(dvfs_info->dev, &res); + if (IS_ERR(dvfs_info->base)) { + ret = PTR_ERR(dvfs_info->base); + goto err_put_node; + } + + dvfs_info->irq = irq_of_parse_and_map(np, 0); + if (!dvfs_info->irq) { + dev_err(dvfs_info->dev, "No cpufreq irq found\n"); + ret = -ENODEV; + goto err_put_node; + } + + ret = of_init_opp_table(dvfs_info->dev); + if (ret) { + dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret); + goto err_put_node; + } + + ret = dev_pm_opp_init_cpufreq_table(dvfs_info->dev, + &dvfs_info->freq_table); + if (ret) { + dev_err(dvfs_info->dev, + "failed to init cpufreq table: %d\n", ret); + goto err_free_opp; + } + dvfs_info->freq_count = dev_pm_opp_get_opp_count(dvfs_info->dev); + exynos_sort_descend_freq_table(); + + if (of_property_read_u32(np, "clock-latency", &dvfs_info->latency)) + dvfs_info->latency = DEF_TRANS_LATENCY; + + dvfs_info->cpu_clk = devm_clk_get(dvfs_info->dev, "armclk"); + if (IS_ERR(dvfs_info->cpu_clk)) { + dev_err(dvfs_info->dev, "Failed to get cpu clock\n"); + ret = PTR_ERR(dvfs_info->cpu_clk); + goto err_free_table; + } + + cur_frequency = clk_get_rate(dvfs_info->cpu_clk); + if (!cur_frequency) { + dev_err(dvfs_info->dev, "Failed to get clock rate\n"); + ret = -EINVAL; + goto err_free_table; + } + cur_frequency /= 1000; + + INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work); + ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq, + exynos_cpufreq_irq, IRQF_TRIGGER_NONE, + CPUFREQ_NAME, dvfs_info); + if (ret) { + dev_err(dvfs_info->dev, "Failed to register IRQ\n"); + goto err_free_table; + } + + ret = init_div_table(); + if (ret) { + dev_err(dvfs_info->dev, "Failed to initialise div table\n"); + goto err_free_table; + } + + exynos_enable_dvfs(cur_frequency); + ret = cpufreq_register_driver(&exynos_driver); + if (ret) { + dev_err(dvfs_info->dev, + "%s: failed to register cpufreq driver\n", __func__); + goto err_free_table; + } + + of_node_put(np); + dvfs_info->dvfs_enabled = true; + return 0; + +err_free_table: + dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); +err_free_opp: + of_free_opp_table(dvfs_info->dev); +err_put_node: + of_node_put(np); + dev_err(&pdev->dev, "%s: failed initialization\n", __func__); + return ret; +} + +static int exynos_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&exynos_driver); + dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); + of_free_opp_table(dvfs_info->dev); + return 0; +} + +static struct platform_driver exynos_cpufreq_platdrv = { + .driver = { + .name = "exynos5440-cpufreq", + .of_match_table = exynos_cpufreq_match, + }, + .probe = exynos_cpufreq_probe, + .remove = exynos_cpufreq_remove, +}; +module_platform_driver(exynos_cpufreq_platdrv); + +MODULE_AUTHOR("Amit Daniel Kachhap <amit.daniel@samsung.com>"); +MODULE_DESCRIPTION("Exynos5440 cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/freq_table.c b/kernel/drivers/cpufreq/freq_table.c new file mode 100644 index 000000000..df14766a8 --- /dev/null +++ b/kernel/drivers/cpufreq/freq_table.c @@ -0,0 +1,311 @@ +/* + * linux/drivers/cpufreq/freq_table.c + * + * Copyright (C) 2002 - 2003 Dominik Brodowski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/module.h> + +/********************************************************************* + * FREQUENCY TABLE HELPERS * + *********************************************************************/ + +int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table) +{ + struct cpufreq_frequency_table *pos; + unsigned int min_freq = ~0; + unsigned int max_freq = 0; + unsigned int freq; + + cpufreq_for_each_valid_entry(pos, table) { + freq = pos->frequency; + + if (!cpufreq_boost_enabled() + && (pos->flags & CPUFREQ_BOOST_FREQ)) + continue; + + pr_debug("table entry %u: %u kHz\n", (int)(pos - table), freq); + if (freq < min_freq) + min_freq = freq; + if (freq > max_freq) + max_freq = freq; + } + + policy->min = policy->cpuinfo.min_freq = min_freq; + policy->max = policy->cpuinfo.max_freq = max_freq; + + if (policy->min == ~0) + return -EINVAL; + else + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_frequency_table_cpuinfo); + + +int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table) +{ + struct cpufreq_frequency_table *pos; + unsigned int freq, next_larger = ~0; + bool found = false; + + pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n", + policy->min, policy->max, policy->cpu); + + cpufreq_verify_within_cpu_limits(policy); + + cpufreq_for_each_valid_entry(pos, table) { + freq = pos->frequency; + + if ((freq >= policy->min) && (freq <= policy->max)) { + found = true; + break; + } + + if ((next_larger > freq) && (freq > policy->max)) + next_larger = freq; + } + + if (!found) { + policy->max = next_larger; + cpufreq_verify_within_cpu_limits(policy); + } + + pr_debug("verification lead to (%u - %u kHz) for cpu %u\n", + policy->min, policy->max, policy->cpu); + + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_frequency_table_verify); + +/* + * Generic routine to verify policy & frequency table, requires driver to set + * policy->freq_table prior to it. + */ +int cpufreq_generic_frequency_table_verify(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *table = + cpufreq_frequency_get_table(policy->cpu); + if (!table) + return -ENODEV; + + return cpufreq_frequency_table_verify(policy, table); +} +EXPORT_SYMBOL_GPL(cpufreq_generic_frequency_table_verify); + +int cpufreq_frequency_table_target(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table, + unsigned int target_freq, + unsigned int relation, + unsigned int *index) +{ + struct cpufreq_frequency_table optimal = { + .driver_data = ~0, + .frequency = 0, + }; + struct cpufreq_frequency_table suboptimal = { + .driver_data = ~0, + .frequency = 0, + }; + struct cpufreq_frequency_table *pos; + unsigned int freq, diff, i = 0; + + pr_debug("request for target %u kHz (relation: %u) for cpu %u\n", + target_freq, relation, policy->cpu); + + switch (relation) { + case CPUFREQ_RELATION_H: + suboptimal.frequency = ~0; + break; + case CPUFREQ_RELATION_L: + case CPUFREQ_RELATION_C: + optimal.frequency = ~0; + break; + } + + cpufreq_for_each_valid_entry(pos, table) { + freq = pos->frequency; + + i = pos - table; + if ((freq < policy->min) || (freq > policy->max)) + continue; + if (freq == target_freq) { + optimal.driver_data = i; + break; + } + switch (relation) { + case CPUFREQ_RELATION_H: + if (freq < target_freq) { + if (freq >= optimal.frequency) { + optimal.frequency = freq; + optimal.driver_data = i; + } + } else { + if (freq <= suboptimal.frequency) { + suboptimal.frequency = freq; + suboptimal.driver_data = i; + } + } + break; + case CPUFREQ_RELATION_L: + if (freq > target_freq) { + if (freq <= optimal.frequency) { + optimal.frequency = freq; + optimal.driver_data = i; + } + } else { + if (freq >= suboptimal.frequency) { + suboptimal.frequency = freq; + suboptimal.driver_data = i; + } + } + break; + case CPUFREQ_RELATION_C: + diff = abs(freq - target_freq); + if (diff < optimal.frequency || + (diff == optimal.frequency && + freq > table[optimal.driver_data].frequency)) { + optimal.frequency = diff; + optimal.driver_data = i; + } + break; + } + } + if (optimal.driver_data > i) { + if (suboptimal.driver_data > i) + return -EINVAL; + *index = suboptimal.driver_data; + } else + *index = optimal.driver_data; + + pr_debug("target index is %u, freq is:%u kHz\n", *index, + table[*index].frequency); + + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_frequency_table_target); + +int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy, + unsigned int freq) +{ + struct cpufreq_frequency_table *pos, *table; + + table = cpufreq_frequency_get_table(policy->cpu); + if (unlikely(!table)) { + pr_debug("%s: Unable to find frequency table\n", __func__); + return -ENOENT; + } + + cpufreq_for_each_valid_entry(pos, table) + if (pos->frequency == freq) + return pos - table; + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_index); + +/** + * show_available_freqs - show available frequencies for the specified CPU + */ +static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf, + bool show_boost) +{ + ssize_t count = 0; + struct cpufreq_frequency_table *pos, *table = policy->freq_table; + + if (!table) + return -ENODEV; + + cpufreq_for_each_valid_entry(pos, table) { + /* + * show_boost = true and driver_data = BOOST freq + * display BOOST freqs + * + * show_boost = false and driver_data = BOOST freq + * show_boost = true and driver_data != BOOST freq + * continue - do not display anything + * + * show_boost = false and driver_data != BOOST freq + * display NON BOOST freqs + */ + if (show_boost ^ (pos->flags & CPUFREQ_BOOST_FREQ)) + continue; + + count += sprintf(&buf[count], "%d ", pos->frequency); + } + count += sprintf(&buf[count], "\n"); + + return count; + +} + +#define cpufreq_attr_available_freq(_name) \ +struct freq_attr cpufreq_freq_attr_##_name##_freqs = \ +__ATTR_RO(_name##_frequencies) + +/** + * show_scaling_available_frequencies - show available normal frequencies for + * the specified CPU + */ +static ssize_t scaling_available_frequencies_show(struct cpufreq_policy *policy, + char *buf) +{ + return show_available_freqs(policy, buf, false); +} +cpufreq_attr_available_freq(scaling_available); +EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs); + +/** + * show_available_boost_freqs - show available boost frequencies for + * the specified CPU + */ +static ssize_t scaling_boost_frequencies_show(struct cpufreq_policy *policy, + char *buf) +{ + return show_available_freqs(policy, buf, true); +} +cpufreq_attr_available_freq(scaling_boost); +EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_boost_freqs); + +struct freq_attr *cpufreq_generic_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, +#ifdef CONFIG_CPU_FREQ_BOOST_SW + &cpufreq_freq_attr_scaling_boost_freqs, +#endif + NULL, +}; +EXPORT_SYMBOL_GPL(cpufreq_generic_attr); + +int cpufreq_table_validate_and_show(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table) +{ + int ret = cpufreq_frequency_table_cpuinfo(policy, table); + + if (!ret) + policy->freq_table = table; + + return ret; +} +EXPORT_SYMBOL_GPL(cpufreq_table_validate_and_show); + +struct cpufreq_policy *cpufreq_cpu_get_raw(unsigned int cpu); + +struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); + return policy ? policy->freq_table : NULL; +} +EXPORT_SYMBOL_GPL(cpufreq_frequency_get_table); + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("CPUfreq frequency table helpers"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/gx-suspmod.c b/kernel/drivers/cpufreq/gx-suspmod.c new file mode 100644 index 000000000..1d723dc88 --- /dev/null +++ b/kernel/drivers/cpufreq/gx-suspmod.c @@ -0,0 +1,502 @@ +/* + * Cyrix MediaGX and NatSemi Geode Suspend Modulation + * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * (C) 2002 Hiroshi Miura <miura@da-cha.org> + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + * + * Theoretical note: + * + * (see Geode(tm) CS5530 manual (rev.4.1) page.56) + * + * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 + * are based on Suspend Modulation. + * + * Suspend Modulation works by asserting and de-asserting the SUSP# pin + * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# + * the CPU enters an idle state. GX1 stops its core clock when SUSP# is + * asserted then power consumption is reduced. + * + * Suspend Modulation's OFF/ON duration are configurable + * with 'Suspend Modulation OFF Count Register' + * and 'Suspend Modulation ON Count Register'. + * These registers are 8bit counters that represent the number of + * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) + * to the processor. + * + * These counters define a ratio which is the effective frequency + * of operation of the system. + * + * OFF Count + * F_eff = Fgx * ---------------------- + * OFF Count + ON Count + * + * 0 <= On Count, Off Count <= 255 + * + * From these limits, we can get register values + * + * off_duration + on_duration <= MAX_DURATION + * on_duration = off_duration * (stock_freq - freq) / freq + * + * off_duration = (freq * DURATION) / stock_freq + * on_duration = DURATION - off_duration + * + * + *--------------------------------------------------------------------------- + * + * ChangeLog: + * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> + * - fix on/off register mistake + * - fix cpu_khz calc when it stops cpu modulation. + * + * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> + * - rewrite for Cyrix MediaGX Cx5510/5520 and + * NatSemi Geode Cs5530(A). + * + * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * - cs5530_mod patch for 2.4.19-rc1. + * + *--------------------------------------------------------------------------- + * + * Todo + * Test on machines with 5510, 5530, 5530A + */ + +/************************************************************************ + * Suspend Modulation - Definitions * + ************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include <asm/cpu_device_id.h> +#include <asm/processor-cyrix.h> + +/* PCI config registers, all at F0 */ +#define PCI_PMER1 0x80 /* power management enable register 1 */ +#define PCI_PMER2 0x81 /* power management enable register 2 */ +#define PCI_PMER3 0x82 /* power management enable register 3 */ +#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ +#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ +#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ +#define PCI_MODON 0x95 /* suspend modulation ON counter register */ +#define PCI_SUSCFG 0x96 /* suspend configuration register */ + +/* PMER1 bits */ +#define GPM (1<<0) /* global power management */ +#define GIT (1<<1) /* globally enable PM device idle timers */ +#define GTR (1<<2) /* globally enable IO traps */ +#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ +#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ + +/* SUSCFG bits */ +#define SUSMOD (1<<0) /* enable/disable suspend modulation */ +/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */ +#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ + /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ +#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ +/* the below is supported only with cs5530A */ +#define PWRSVE_ISA (1<<3) /* stop ISA clock */ +#define PWRSVE (1<<4) /* active idle */ + +struct gxfreq_params { + u8 on_duration; + u8 off_duration; + u8 pci_suscfg; + u8 pci_pmer1; + u8 pci_pmer2; + struct pci_dev *cs55x0; +}; + +static struct gxfreq_params *gx_params; +static int stock_freq; + +/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ +static int pci_busclk; +module_param(pci_busclk, int, 0444); + +/* maximum duration for which the cpu may be suspended + * (32us * MAX_DURATION). If no parameter is given, this defaults + * to 255. + * Note that this leads to a maximum of 8 ms(!) where the CPU clock + * is suspended -- processing power is just 0.39% of what it used to be, + * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ +static int max_duration = 255; +module_param(max_duration, int, 0444); + +/* For the default policy, we want at least some processing power + * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) + */ +#define POLICY_MIN_DIV 20 + + +/** + * we can detect a core multipiler from dir0_lsb + * from GX1 datasheet p.56, + * MULT[3:0]: + * 0000 = SYSCLK multiplied by 4 (test only) + * 0001 = SYSCLK multiplied by 10 + * 0010 = SYSCLK multiplied by 4 + * 0011 = SYSCLK multiplied by 6 + * 0100 = SYSCLK multiplied by 9 + * 0101 = SYSCLK multiplied by 5 + * 0110 = SYSCLK multiplied by 7 + * 0111 = SYSCLK multiplied by 8 + * of 33.3MHz + **/ +static int gx_freq_mult[16] = { + 4, 10, 4, 6, 9, 5, 7, 8, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + + +/**************************************************************** + * Low Level chipset interface * + ****************************************************************/ +static struct pci_device_id gx_chipset_tbl[] __initdata = { + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), }, + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), }, + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, gx_chipset_tbl); + +static void gx_write_byte(int reg, int value) +{ + pci_write_config_byte(gx_params->cs55x0, reg, value); +} + +/** + * gx_detect_chipset: + * + **/ +static struct pci_dev * __init gx_detect_chipset(void) +{ + struct pci_dev *gx_pci = NULL; + + /* detect which companion chip is used */ + for_each_pci_dev(gx_pci) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) + return gx_pci; + } + + pr_debug("error: no supported chipset found!\n"); + return NULL; +} + +/** + * gx_get_cpuspeed: + * + * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi + * Geode CPU runs. + */ +static unsigned int gx_get_cpuspeed(unsigned int cpu) +{ + if ((gx_params->pci_suscfg & SUSMOD) == 0) + return stock_freq; + + return (stock_freq * gx_params->off_duration) + / (gx_params->on_duration + gx_params->off_duration); +} + +/** + * gx_validate_speed: + * determine current cpu speed + * + **/ + +static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, + u8 *off_duration) +{ + unsigned int i; + u8 tmp_on, tmp_off; + int old_tmp_freq = stock_freq; + int tmp_freq; + + *off_duration = 1; + *on_duration = 0; + + for (i = max_duration; i > 0; i--) { + tmp_off = ((khz * i) / stock_freq) & 0xff; + tmp_on = i - tmp_off; + tmp_freq = (stock_freq * tmp_off) / i; + /* if this relation is closer to khz, use this. If it's equal, + * prefer it, too - lower latency */ + if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) { + *on_duration = tmp_on; + *off_duration = tmp_off; + old_tmp_freq = tmp_freq; + } + } + + return old_tmp_freq; +} + + +/** + * gx_set_cpuspeed: + * set cpu speed in khz. + **/ + +static void gx_set_cpuspeed(struct cpufreq_policy *policy, unsigned int khz) +{ + u8 suscfg, pmer1; + unsigned int new_khz; + unsigned long flags; + struct cpufreq_freqs freqs; + + freqs.old = gx_get_cpuspeed(0); + + new_khz = gx_validate_speed(khz, &gx_params->on_duration, + &gx_params->off_duration); + + freqs.new = new_khz; + + cpufreq_freq_transition_begin(policy, &freqs); + local_irq_save(flags); + + if (new_khz != stock_freq) { + /* if new khz == 100% of CPU speed, it is special case */ + switch (gx_params->cs55x0->device) { + case PCI_DEVICE_ID_CYRIX_5530_LEGACY: + pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; + /* FIXME: need to test other values -- Zwane,Miura */ + /* typical 2 to 4ms */ + gx_write_byte(PCI_IRQTC, 4); + /* typical 50 to 100ms */ + gx_write_byte(PCI_VIDTC, 100); + gx_write_byte(PCI_PMER1, pmer1); + + if (gx_params->cs55x0->revision < 0x10) { + /* CS5530(rev 1.2, 1.3) */ + suscfg = gx_params->pci_suscfg|SUSMOD; + } else { + /* CS5530A,B.. */ + suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE; + } + break; + case PCI_DEVICE_ID_CYRIX_5520: + case PCI_DEVICE_ID_CYRIX_5510: + suscfg = gx_params->pci_suscfg | SUSMOD; + break; + default: + local_irq_restore(flags); + pr_debug("fatal: try to set unknown chipset.\n"); + return; + } + } else { + suscfg = gx_params->pci_suscfg & ~(SUSMOD); + gx_params->off_duration = 0; + gx_params->on_duration = 0; + pr_debug("suspend modulation disabled: cpu runs 100%% speed.\n"); + } + + gx_write_byte(PCI_MODOFF, gx_params->off_duration); + gx_write_byte(PCI_MODON, gx_params->on_duration); + + gx_write_byte(PCI_SUSCFG, suscfg); + pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); + + local_irq_restore(flags); + + gx_params->pci_suscfg = suscfg; + + cpufreq_freq_transition_end(policy, &freqs, 0); + + pr_debug("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", + gx_params->on_duration * 32, gx_params->off_duration * 32); + pr_debug("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); +} + +/**************************************************************** + * High level functions * + ****************************************************************/ + +/* + * cpufreq_gx_verify: test if frequency range is valid + * + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. + */ + +static int cpufreq_gx_verify(struct cpufreq_policy *policy) +{ + unsigned int tmp_freq = 0; + u8 tmp1, tmp2; + + if (!stock_freq || !policy) + return -EINVAL; + + policy->cpu = 0; + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); + + /* it needs to be assured that at least one supported frequency is + * within policy->min and policy->max. If it is not, policy->max + * needs to be increased until one freuqency is supported. + * policy->min may not be decreased, though. This way we guarantee a + * specific processing capacity. + */ + tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); + if (tmp_freq < policy->min) + tmp_freq += stock_freq / max_duration; + policy->min = tmp_freq; + if (policy->min > policy->max) + policy->max = tmp_freq; + tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); + if (tmp_freq > policy->max) + tmp_freq -= stock_freq / max_duration; + policy->max = tmp_freq; + if (policy->max < policy->min) + policy->max = policy->min; + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); + + return 0; +} + +/* + * cpufreq_gx_target: + * + */ +static int cpufreq_gx_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + u8 tmp1, tmp2; + unsigned int tmp_freq; + + if (!stock_freq || !policy) + return -EINVAL; + + policy->cpu = 0; + + tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2); + while (tmp_freq < policy->min) { + tmp_freq += stock_freq / max_duration; + tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); + } + while (tmp_freq > policy->max) { + tmp_freq -= stock_freq / max_duration; + tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); + } + + gx_set_cpuspeed(policy, tmp_freq); + + return 0; +} + +static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int maxfreq; + + if (!policy || policy->cpu != 0) + return -ENODEV; + + /* determine maximum frequency */ + if (pci_busclk) + maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; + else if (cpu_khz) + maxfreq = cpu_khz; + else + maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; + + stock_freq = maxfreq; + + pr_debug("cpu max frequency is %d.\n", maxfreq); + + /* setup basic struct for cpufreq API */ + policy->cpu = 0; + + if (max_duration < POLICY_MIN_DIV) + policy->min = maxfreq / max_duration; + else + policy->min = maxfreq / POLICY_MIN_DIV; + policy->max = maxfreq; + policy->cpuinfo.min_freq = maxfreq / max_duration; + policy->cpuinfo.max_freq = maxfreq; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + + return 0; +} + +/* + * cpufreq_gx_init: + * MediaGX/Geode GX initialize cpufreq driver + */ +static struct cpufreq_driver gx_suspmod_driver = { + .get = gx_get_cpuspeed, + .verify = cpufreq_gx_verify, + .target = cpufreq_gx_target, + .init = cpufreq_gx_cpu_init, + .name = "gx-suspmod", +}; + +static int __init cpufreq_gx_init(void) +{ + int ret; + struct gxfreq_params *params; + struct pci_dev *gx_pci; + + /* Test if we have the right hardware */ + gx_pci = gx_detect_chipset(); + if (gx_pci == NULL) + return -ENODEV; + + /* check whether module parameters are sane */ + if (max_duration > 0xff) + max_duration = 0xff; + + pr_debug("geode suspend modulation available.\n"); + + params = kzalloc(sizeof(*params), GFP_KERNEL); + if (params == NULL) + return -ENOMEM; + + params->cs55x0 = gx_pci; + gx_params = params; + + /* keep cs55x0 configurations */ + pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg)); + pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); + pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); + pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); + pci_read_config_byte(params->cs55x0, PCI_MODOFF, + &(params->off_duration)); + + ret = cpufreq_register_driver(&gx_suspmod_driver); + if (ret) { + kfree(params); + return ret; /* register error! */ + } + + return 0; +} + +static void __exit cpufreq_gx_exit(void) +{ + cpufreq_unregister_driver(&gx_suspmod_driver); + pci_dev_put(gx_params->cs55x0); + kfree(gx_params); +} + +MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>"); +MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); +MODULE_LICENSE("GPL"); + +module_init(cpufreq_gx_init); +module_exit(cpufreq_gx_exit); + diff --git a/kernel/drivers/cpufreq/highbank-cpufreq.c b/kernel/drivers/cpufreq/highbank-cpufreq.c new file mode 100644 index 000000000..1608f7105 --- /dev/null +++ b/kernel/drivers/cpufreq/highbank-cpufreq.c @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver provides the clk notifier callbacks that are used when + * the cpufreq-dt driver changes to frequency to alert the highbank + * EnergyCore Management Engine (ECME) about the need to change + * voltage. The ECME interfaces with the actual voltage regulators. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/pl320-ipc.h> +#include <linux/platform_device.h> + +#define HB_CPUFREQ_CHANGE_NOTE 0x80000001 +#define HB_CPUFREQ_IPC_LEN 7 +#define HB_CPUFREQ_VOLT_RETRIES 15 + +static int hb_voltage_change(unsigned int freq) +{ + u32 msg[HB_CPUFREQ_IPC_LEN] = {HB_CPUFREQ_CHANGE_NOTE, freq / 1000000}; + + return pl320_ipc_transmit(msg); +} + +static int hb_cpufreq_clk_notify(struct notifier_block *nb, + unsigned long action, void *hclk) +{ + struct clk_notifier_data *clk_data = hclk; + int i = 0; + + if (action == PRE_RATE_CHANGE) { + if (clk_data->new_rate > clk_data->old_rate) + while (hb_voltage_change(clk_data->new_rate)) + if (i++ > HB_CPUFREQ_VOLT_RETRIES) + return NOTIFY_BAD; + } else if (action == POST_RATE_CHANGE) { + if (clk_data->new_rate < clk_data->old_rate) + while (hb_voltage_change(clk_data->new_rate)) + if (i++ > HB_CPUFREQ_VOLT_RETRIES) + return NOTIFY_BAD; + } + + return NOTIFY_DONE; +} + +static struct notifier_block hb_cpufreq_clk_nb = { + .notifier_call = hb_cpufreq_clk_notify, +}; + +static int hb_cpufreq_driver_init(void) +{ + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; + struct device *cpu_dev; + struct clk *cpu_clk; + struct device_node *np; + int ret; + + if ((!of_machine_is_compatible("calxeda,highbank")) && + (!of_machine_is_compatible("calxeda,ecx-2000"))) + return -ENODEV; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("failed to get highbank cpufreq device\n"); + return -ENODEV; + } + + np = of_node_get(cpu_dev->of_node); + if (!np) { + pr_err("failed to find highbank cpufreq node\n"); + return -ENOENT; + } + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + ret = PTR_ERR(cpu_clk); + pr_err("failed to get cpu0 clock: %d\n", ret); + goto out_put_node; + } + + ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb); + if (ret) { + pr_err("failed to register clk notifier: %d\n", ret); + goto out_put_node; + } + + /* Instantiate cpufreq-dt */ + platform_device_register_full(&devinfo); + +out_put_node: + of_node_put(np); + return ret; +} +module_init(hb_cpufreq_driver_init); + +MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>"); +MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/hisi-acpu-cpufreq.c b/kernel/drivers/cpufreq/hisi-acpu-cpufreq.c new file mode 100644 index 000000000..026d5b222 --- /dev/null +++ b/kernel/drivers/cpufreq/hisi-acpu-cpufreq.c @@ -0,0 +1,42 @@ +/* + * Hisilicon Platforms Using ACPU CPUFreq Support + * + * Copyright (c) 2015 Hisilicon Limited. + * Copyright (c) 2015 Linaro Limited. + * + * Leo Yan <leo.yan@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +static int __init hisi_acpu_cpufreq_driver_init(void) +{ + struct platform_device *pdev; + + if (!of_machine_is_compatible("hisilicon,hi6220")) + return -ENODEV; + + pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + return PTR_ERR_OR_ZERO(pdev); +} +module_init(hisi_acpu_cpufreq_driver_init); + +MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>"); +MODULE_DESCRIPTION("Hisilicon acpu cpufreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/cpufreq/ia64-acpi-cpufreq.c b/kernel/drivers/cpufreq/ia64-acpi-cpufreq.c new file mode 100644 index 000000000..c30aaa6a5 --- /dev/null +++ b/kernel/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -0,0 +1,376 @@ +/* + * This file provides the ACPI based P-state support. This + * module works with generic cpufreq infrastructure. Most of + * the code is based on i386 version + * (arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c) + * + * Copyright (C) 2005 Intel Corp + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pal.h> + +#include <linux/acpi.h> +#include <acpi/processor.h> + +MODULE_AUTHOR("Venkatesh Pallipadi"); +MODULE_DESCRIPTION("ACPI Processor P-States Driver"); +MODULE_LICENSE("GPL"); + + +struct cpufreq_acpi_io { + struct acpi_processor_performance acpi_data; + struct cpufreq_frequency_table *freq_table; + unsigned int resume; +}; + +static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; + +static struct cpufreq_driver acpi_cpufreq_driver; + + +static int +processor_set_pstate ( + u32 value) +{ + s64 retval; + + pr_debug("processor_set_pstate\n"); + + retval = ia64_pal_set_pstate((u64)value); + + if (retval) { + pr_debug("Failed to set freq to 0x%x, with error 0x%lx\n", + value, retval); + return -ENODEV; + } + return (int)retval; +} + + +static int +processor_get_pstate ( + u32 *value) +{ + u64 pstate_index = 0; + s64 retval; + + pr_debug("processor_get_pstate\n"); + + retval = ia64_pal_get_pstate(&pstate_index, + PAL_GET_PSTATE_TYPE_INSTANT); + *value = (u32) pstate_index; + + if (retval) + pr_debug("Failed to get current freq with " + "error 0x%lx, idx 0x%x\n", retval, *value); + + return (int)retval; +} + + +/* To be used only after data->acpi_data is initialized */ +static unsigned +extract_clock ( + struct cpufreq_acpi_io *data, + unsigned value, + unsigned int cpu) +{ + unsigned long i; + + pr_debug("extract_clock\n"); + + for (i = 0; i < data->acpi_data.state_count; i++) { + if (value == data->acpi_data.states[i].status) + return data->acpi_data.states[i].core_frequency; + } + return data->acpi_data.states[i-1].core_frequency; +} + + +static unsigned int +processor_get_freq ( + struct cpufreq_acpi_io *data, + unsigned int cpu) +{ + int ret = 0; + u32 value = 0; + cpumask_t saved_mask; + unsigned long clock_freq; + + pr_debug("processor_get_freq\n"); + + saved_mask = current->cpus_allowed; + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + if (smp_processor_id() != cpu) + goto migrate_end; + + /* processor_get_pstate gets the instantaneous frequency */ + ret = processor_get_pstate(&value); + + if (ret) { + set_cpus_allowed_ptr(current, &saved_mask); + printk(KERN_WARNING "get performance failed with error %d\n", + ret); + ret = 0; + goto migrate_end; + } + clock_freq = extract_clock(data, value, cpu); + ret = (clock_freq*1000); + +migrate_end: + set_cpus_allowed_ptr(current, &saved_mask); + return ret; +} + + +static int +processor_set_freq ( + struct cpufreq_acpi_io *data, + struct cpufreq_policy *policy, + int state) +{ + int ret = 0; + u32 value = 0; + cpumask_t saved_mask; + int retval; + + pr_debug("processor_set_freq\n"); + + saved_mask = current->cpus_allowed; + set_cpus_allowed_ptr(current, cpumask_of(policy->cpu)); + if (smp_processor_id() != policy->cpu) { + retval = -EAGAIN; + goto migrate_end; + } + + if (state == data->acpi_data.state) { + if (unlikely(data->resume)) { + pr_debug("Called after resume, resetting to P%d\n", state); + data->resume = 0; + } else { + pr_debug("Already at target state (P%d)\n", state); + retval = 0; + goto migrate_end; + } + } + + pr_debug("Transitioning from P%d to P%d\n", + data->acpi_data.state, state); + + /* + * First we write the target state's 'control' value to the + * control_register. + */ + + value = (u32) data->acpi_data.states[state].control; + + pr_debug("Transitioning to state: 0x%08x\n", value); + + ret = processor_set_pstate(value); + if (ret) { + printk(KERN_WARNING "Transition failed with error %d\n", ret); + retval = -ENODEV; + goto migrate_end; + } + + data->acpi_data.state = state; + + retval = 0; + +migrate_end: + set_cpus_allowed_ptr(current, &saved_mask); + return (retval); +} + + +static unsigned int +acpi_cpufreq_get ( + unsigned int cpu) +{ + struct cpufreq_acpi_io *data = acpi_io_data[cpu]; + + pr_debug("acpi_cpufreq_get\n"); + + return processor_get_freq(data, cpu); +} + + +static int +acpi_cpufreq_target ( + struct cpufreq_policy *policy, + unsigned int index) +{ + return processor_set_freq(acpi_io_data[policy->cpu], policy, index); +} + +static int +acpi_cpufreq_cpu_init ( + struct cpufreq_policy *policy) +{ + unsigned int i; + unsigned int cpu = policy->cpu; + struct cpufreq_acpi_io *data; + unsigned int result = 0; + + pr_debug("acpi_cpufreq_cpu_init\n"); + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return (-ENOMEM); + + acpi_io_data[cpu] = data; + + result = acpi_processor_register_performance(&data->acpi_data, cpu); + + if (result) + goto err_free; + + /* capability check */ + if (data->acpi_data.state_count <= 1) { + pr_debug("No P-States\n"); + result = -ENODEV; + goto err_unreg; + } + + if ((data->acpi_data.control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) || + (data->acpi_data.status_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE)) { + pr_debug("Unsupported address space [%d, %d]\n", + (u32) (data->acpi_data.control_register.space_id), + (u32) (data->acpi_data.status_register.space_id)); + result = -ENODEV; + goto err_unreg; + } + + /* alloc freq_table */ + data->freq_table = kzalloc(sizeof(*data->freq_table) * + (data->acpi_data.state_count + 1), + GFP_KERNEL); + if (!data->freq_table) { + result = -ENOMEM; + goto err_unreg; + } + + /* detect transition latency */ + policy->cpuinfo.transition_latency = 0; + for (i=0; i<data->acpi_data.state_count; i++) { + if ((data->acpi_data.states[i].transition_latency * 1000) > + policy->cpuinfo.transition_latency) { + policy->cpuinfo.transition_latency = + data->acpi_data.states[i].transition_latency * 1000; + } + } + + /* table init */ + for (i = 0; i <= data->acpi_data.state_count; i++) + { + if (i < data->acpi_data.state_count) { + data->freq_table[i].frequency = + data->acpi_data.states[i].core_frequency * 1000; + } else { + data->freq_table[i].frequency = CPUFREQ_TABLE_END; + } + } + + result = cpufreq_table_validate_and_show(policy, data->freq_table); + if (result) { + goto err_freqfree; + } + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management " + "activated.\n", cpu); + + for (i = 0; i < data->acpi_data.state_count; i++) + pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", + (i == data->acpi_data.state?'*':' '), i, + (u32) data->acpi_data.states[i].core_frequency, + (u32) data->acpi_data.states[i].power, + (u32) data->acpi_data.states[i].transition_latency, + (u32) data->acpi_data.states[i].bus_master_latency, + (u32) data->acpi_data.states[i].status, + (u32) data->acpi_data.states[i].control); + + /* the first call to ->target() should result in us actually + * writing something to the appropriate registers. */ + data->resume = 1; + + return (result); + + err_freqfree: + kfree(data->freq_table); + err_unreg: + acpi_processor_unregister_performance(&data->acpi_data, cpu); + err_free: + kfree(data); + acpi_io_data[cpu] = NULL; + + return (result); +} + + +static int +acpi_cpufreq_cpu_exit ( + struct cpufreq_policy *policy) +{ + struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; + + pr_debug("acpi_cpufreq_cpu_exit\n"); + + if (data) { + acpi_io_data[policy->cpu] = NULL; + acpi_processor_unregister_performance(&data->acpi_data, + policy->cpu); + kfree(data); + } + + return (0); +} + + +static struct cpufreq_driver acpi_cpufreq_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = acpi_cpufreq_target, + .get = acpi_cpufreq_get, + .init = acpi_cpufreq_cpu_init, + .exit = acpi_cpufreq_cpu_exit, + .name = "acpi-cpufreq", + .attr = cpufreq_generic_attr, +}; + + +static int __init +acpi_cpufreq_init (void) +{ + pr_debug("acpi_cpufreq_init\n"); + + return cpufreq_register_driver(&acpi_cpufreq_driver); +} + + +static void __exit +acpi_cpufreq_exit (void) +{ + pr_debug("acpi_cpufreq_exit\n"); + + cpufreq_unregister_driver(&acpi_cpufreq_driver); + return; +} + + +late_initcall(acpi_cpufreq_init); +module_exit(acpi_cpufreq_exit); + diff --git a/kernel/drivers/cpufreq/imx6q-cpufreq.c b/kernel/drivers/cpufreq/imx6q-cpufreq.c new file mode 100644 index 000000000..380a90d3c --- /dev/null +++ b/kernel/drivers/cpufreq/imx6q-cpufreq.c @@ -0,0 +1,368 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#define PU_SOC_VOLTAGE_NORMAL 1250000 +#define PU_SOC_VOLTAGE_HIGH 1275000 +#define FREQ_1P2_GHZ 1200000000 + +static struct regulator *arm_reg; +static struct regulator *pu_reg; +static struct regulator *soc_reg; + +static struct clk *arm_clk; +static struct clk *pll1_sys_clk; +static struct clk *pll1_sw_clk; +static struct clk *step_clk; +static struct clk *pll2_pfd2_396m_clk; + +static struct device *cpu_dev; +static bool free_opp; +static struct cpufreq_frequency_table *freq_table; +static unsigned int transition_latency; + +static u32 *imx6_soc_volt; +static u32 soc_opp_count; + +static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct dev_pm_opp *opp; + unsigned long freq_hz, volt, volt_old; + unsigned int old_freq, new_freq; + int ret; + + new_freq = freq_table[index].frequency; + freq_hz = new_freq * 1000; + old_freq = clk_get_rate(arm_clk) / 1000; + + rcu_read_lock(); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz); + return PTR_ERR(opp); + } + + volt = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + volt_old = regulator_get_voltage(arm_reg); + + dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", + old_freq / 1000, volt_old / 1000, + new_freq / 1000, volt / 1000); + + /* scaling up? scale voltage before frequency */ + if (new_freq > old_freq) { + if (!IS_ERR(pu_reg)) { + ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0); + if (ret) { + dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret); + return ret; + } + } + ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0); + if (ret) { + dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret); + return ret; + } + ret = regulator_set_voltage_tol(arm_reg, volt, 0); + if (ret) { + dev_err(cpu_dev, + "failed to scale vddarm up: %d\n", ret); + return ret; + } + } + + /* + * The setpoints are selected per PLL/PDF frequencies, so we need to + * reprogram PLL for frequency scaling. The procedure of reprogramming + * PLL1 is as below. + * + * - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it + * - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it + * - Disable pll2_pfd2_396m_clk + */ + clk_set_parent(step_clk, pll2_pfd2_396m_clk); + clk_set_parent(pll1_sw_clk, step_clk); + if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { + clk_set_rate(pll1_sys_clk, new_freq * 1000); + clk_set_parent(pll1_sw_clk, pll1_sys_clk); + } + + /* Ensure the arm clock divider is what we expect */ + ret = clk_set_rate(arm_clk, new_freq * 1000); + if (ret) { + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); + regulator_set_voltage_tol(arm_reg, volt_old, 0); + return ret; + } + + /* scaling down? scale voltage after frequency */ + if (new_freq < old_freq) { + ret = regulator_set_voltage_tol(arm_reg, volt, 0); + if (ret) { + dev_warn(cpu_dev, + "failed to scale vddarm down: %d\n", ret); + ret = 0; + } + ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0); + if (ret) { + dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret); + ret = 0; + } + if (!IS_ERR(pu_reg)) { + ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0); + if (ret) { + dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret); + ret = 0; + } + } + } + + return 0; +} + +static int imx6q_cpufreq_init(struct cpufreq_policy *policy) +{ + policy->clk = arm_clk; + return cpufreq_generic_init(policy, freq_table, transition_latency); +} + +static struct cpufreq_driver imx6q_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = imx6q_set_target, + .get = cpufreq_generic_get, + .init = imx6q_cpufreq_init, + .name = "imx6q-cpufreq", + .attr = cpufreq_generic_attr, +}; + +static int imx6q_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + struct dev_pm_opp *opp; + unsigned long min_volt, max_volt; + int num, ret; + const struct property *prop; + const __be32 *val; + u32 nr, i, j; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("failed to get cpu0 device\n"); + return -ENODEV; + } + + np = of_node_get(cpu_dev->of_node); + if (!np) { + dev_err(cpu_dev, "failed to find cpu0 node\n"); + return -ENOENT; + } + + arm_clk = clk_get(cpu_dev, "arm"); + pll1_sys_clk = clk_get(cpu_dev, "pll1_sys"); + pll1_sw_clk = clk_get(cpu_dev, "pll1_sw"); + step_clk = clk_get(cpu_dev, "step"); + pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m"); + if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) || + IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) { + dev_err(cpu_dev, "failed to get clocks\n"); + ret = -ENOENT; + goto put_clk; + } + + arm_reg = regulator_get(cpu_dev, "arm"); + pu_reg = regulator_get_optional(cpu_dev, "pu"); + soc_reg = regulator_get(cpu_dev, "soc"); + if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) { + dev_err(cpu_dev, "failed to get regulators\n"); + ret = -ENOENT; + goto put_reg; + } + + /* + * We expect an OPP table supplied by platform. + * Just, incase the platform did not supply the OPP + * table, it will try to get it. + */ + num = dev_pm_opp_get_opp_count(cpu_dev); + if (num < 0) { + ret = of_init_opp_table(cpu_dev); + if (ret < 0) { + dev_err(cpu_dev, "failed to init OPP table: %d\n", ret); + goto put_reg; + } + + /* Because we have added the OPPs here, we must free them */ + free_opp = true; + + num = dev_pm_opp_get_opp_count(cpu_dev); + if (num < 0) { + ret = num; + dev_err(cpu_dev, "no OPP table is found: %d\n", ret); + goto out_free_opp; + } + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto put_reg; + } + + /* Make imx6_soc_volt array's size same as arm opp number */ + imx6_soc_volt = devm_kzalloc(cpu_dev, sizeof(*imx6_soc_volt) * num, GFP_KERNEL); + if (imx6_soc_volt == NULL) { + ret = -ENOMEM; + goto free_freq_table; + } + + prop = of_find_property(np, "fsl,soc-operating-points", NULL); + if (!prop || !prop->value) + goto soc_opp_out; + + /* + * Each OPP is a set of tuples consisting of frequency and + * voltage like <freq-kHz vol-uV>. + */ + nr = prop->length / sizeof(u32); + if (nr % 2 || (nr / 2) < num) + goto soc_opp_out; + + for (j = 0; j < num; j++) { + val = prop->value; + for (i = 0; i < nr / 2; i++) { + unsigned long freq = be32_to_cpup(val++); + unsigned long volt = be32_to_cpup(val++); + if (freq_table[j].frequency == freq) { + imx6_soc_volt[soc_opp_count++] = volt; + break; + } + } + } + +soc_opp_out: + /* use fixed soc opp volt if no valid soc opp info found in dtb */ + if (soc_opp_count != num) { + dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n"); + for (j = 0; j < num; j++) + imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL; + if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ) + imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH; + } + + if (of_property_read_u32(np, "clock-latency", &transition_latency)) + transition_latency = CPUFREQ_ETERNAL; + + /* + * Calculate the ramp time for max voltage change in the + * VDDSOC and VDDPU regulators. + */ + ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]); + if (ret > 0) + transition_latency += ret * 1000; + if (!IS_ERR(pu_reg)) { + ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]); + if (ret > 0) + transition_latency += ret * 1000; + } + + /* + * OPP is maintained in order of increasing frequency, and + * freq_table initialised from OPP is therefore sorted in the + * same order. + */ + rcu_read_lock(); + opp = dev_pm_opp_find_freq_exact(cpu_dev, + freq_table[0].frequency * 1000, true); + min_volt = dev_pm_opp_get_voltage(opp); + opp = dev_pm_opp_find_freq_exact(cpu_dev, + freq_table[--num].frequency * 1000, true); + max_volt = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt); + if (ret > 0) + transition_latency += ret * 1000; + + ret = cpufreq_register_driver(&imx6q_cpufreq_driver); + if (ret) { + dev_err(cpu_dev, "failed register driver: %d\n", ret); + goto free_freq_table; + } + + of_node_put(np); + return 0; + +free_freq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); +out_free_opp: + if (free_opp) + of_free_opp_table(cpu_dev); +put_reg: + if (!IS_ERR(arm_reg)) + regulator_put(arm_reg); + if (!IS_ERR(pu_reg)) + regulator_put(pu_reg); + if (!IS_ERR(soc_reg)) + regulator_put(soc_reg); +put_clk: + if (!IS_ERR(arm_clk)) + clk_put(arm_clk); + if (!IS_ERR(pll1_sys_clk)) + clk_put(pll1_sys_clk); + if (!IS_ERR(pll1_sw_clk)) + clk_put(pll1_sw_clk); + if (!IS_ERR(step_clk)) + clk_put(step_clk); + if (!IS_ERR(pll2_pfd2_396m_clk)) + clk_put(pll2_pfd2_396m_clk); + of_node_put(np); + return ret; +} + +static int imx6q_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&imx6q_cpufreq_driver); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); + if (free_opp) + of_free_opp_table(cpu_dev); + regulator_put(arm_reg); + if (!IS_ERR(pu_reg)) + regulator_put(pu_reg); + regulator_put(soc_reg); + clk_put(arm_clk); + clk_put(pll1_sys_clk); + clk_put(pll1_sw_clk); + clk_put(step_clk); + clk_put(pll2_pfd2_396m_clk); + + return 0; +} + +static struct platform_driver imx6q_cpufreq_platdrv = { + .driver = { + .name = "imx6q-cpufreq", + }, + .probe = imx6q_cpufreq_probe, + .remove = imx6q_cpufreq_remove, +}; +module_platform_driver(imx6q_cpufreq_platdrv); + +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/integrator-cpufreq.c b/kernel/drivers/cpufreq/integrator-cpufreq.c new file mode 100644 index 000000000..129e266f7 --- /dev/null +++ b/kernel/drivers/cpufreq/integrator-cpufreq.c @@ -0,0 +1,239 @@ +/* + * Copyright (C) 2001-2002 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * CPU support functions + */ +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/cpufreq.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/mach-types.h> +#include <asm/hardware/icst.h> + +static void __iomem *cm_base; +/* The cpufreq driver only use the OSC register */ +#define INTEGRATOR_HDR_OSC_OFFSET 0x08 +#define INTEGRATOR_HDR_LOCK_OFFSET 0x14 + +static struct cpufreq_driver integrator_driver; + +static const struct icst_params lclk_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, + .vd_min = 8, + .vd_max = 132, + .rd_min = 24, + .rd_max = 24, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, +}; + +static const struct icst_params cclk_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, + .vd_min = 12, + .vd_max = 160, + .rd_min = 24, + .rd_max = 24, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, +}; + +/* + * Validate the speed policy. + */ +static int integrator_verify_policy(struct cpufreq_policy *policy) +{ + struct icst_vco vco; + + cpufreq_verify_within_cpu_limits(policy); + + vco = icst_hz_to_vco(&cclk_params, policy->max * 1000); + policy->max = icst_hz(&cclk_params, vco) / 1000; + + vco = icst_hz_to_vco(&cclk_params, policy->min * 1000); + policy->min = icst_hz(&cclk_params, vco) / 1000; + + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + + +static int integrator_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + cpumask_t cpus_allowed; + int cpu = policy->cpu; + struct icst_vco vco; + struct cpufreq_freqs freqs; + u_int cm_osc; + + /* + * Save this threads cpus_allowed mask. + */ + cpus_allowed = current->cpus_allowed; + + /* + * Bind to the specified CPU. When this call returns, + * we should be running on the right CPU. + */ + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + BUG_ON(cpu != smp_processor_id()); + + /* get current setting */ + cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET); + + if (machine_is_integrator()) { + vco.s = (cm_osc >> 8) & 7; + } else if (machine_is_cintegrator()) { + vco.s = 1; + } + vco.v = cm_osc & 255; + vco.r = 22; + freqs.old = icst_hz(&cclk_params, vco) / 1000; + + /* icst_hz_to_vco rounds down -- so we need the next + * larger freq in case of CPUFREQ_RELATION_L. + */ + if (relation == CPUFREQ_RELATION_L) + target_freq += 999; + if (target_freq > policy->max) + target_freq = policy->max; + vco = icst_hz_to_vco(&cclk_params, target_freq * 1000); + freqs.new = icst_hz(&cclk_params, vco) / 1000; + + if (freqs.old == freqs.new) { + set_cpus_allowed_ptr(current, &cpus_allowed); + return 0; + } + + cpufreq_freq_transition_begin(policy, &freqs); + + cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET); + + if (machine_is_integrator()) { + cm_osc &= 0xfffff800; + cm_osc |= vco.s << 8; + } else if (machine_is_cintegrator()) { + cm_osc &= 0xffffff00; + } + cm_osc |= vco.v; + + __raw_writel(0xa05f, cm_base + INTEGRATOR_HDR_LOCK_OFFSET); + __raw_writel(cm_osc, cm_base + INTEGRATOR_HDR_OSC_OFFSET); + __raw_writel(0, cm_base + INTEGRATOR_HDR_LOCK_OFFSET); + + /* + * Restore the CPUs allowed mask. + */ + set_cpus_allowed_ptr(current, &cpus_allowed); + + cpufreq_freq_transition_end(policy, &freqs, 0); + + return 0; +} + +static unsigned int integrator_get(unsigned int cpu) +{ + cpumask_t cpus_allowed; + unsigned int current_freq; + u_int cm_osc; + struct icst_vco vco; + + cpus_allowed = current->cpus_allowed; + + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + BUG_ON(cpu != smp_processor_id()); + + /* detect memory etc. */ + cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET); + + if (machine_is_integrator()) { + vco.s = (cm_osc >> 8) & 7; + } else { + vco.s = 1; + } + vco.v = cm_osc & 255; + vco.r = 22; + + current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */ + + set_cpus_allowed_ptr(current, &cpus_allowed); + + return current_freq; +} + +static int integrator_cpufreq_init(struct cpufreq_policy *policy) +{ + + /* set default policy and cpuinfo */ + policy->max = policy->cpuinfo.max_freq = 160000; + policy->min = policy->cpuinfo.min_freq = 12000; + policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */ + + return 0; +} + +static struct cpufreq_driver integrator_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = integrator_verify_policy, + .target = integrator_set_target, + .get = integrator_get, + .init = integrator_cpufreq_init, + .name = "integrator", +}; + +static int __init integrator_cpufreq_probe(struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + cm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!cm_base) + return -ENODEV; + + return cpufreq_register_driver(&integrator_driver); +} + +static int __exit integrator_cpufreq_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&integrator_driver); +} + +static const struct of_device_id integrator_cpufreq_match[] = { + { .compatible = "arm,core-module-integrator"}, + { }, +}; + +static struct platform_driver integrator_cpufreq_driver = { + .driver = { + .name = "integrator-cpufreq", + .of_match_table = integrator_cpufreq_match, + }, + .remove = __exit_p(integrator_cpufreq_remove), +}; + +module_platform_driver_probe(integrator_cpufreq_driver, + integrator_cpufreq_probe); + +MODULE_AUTHOR ("Russell M. King"); +MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs"); +MODULE_LICENSE ("GPL"); diff --git a/kernel/drivers/cpufreq/intel_pstate.c b/kernel/drivers/cpufreq/intel_pstate.c new file mode 100644 index 000000000..c45d274a7 --- /dev/null +++ b/kernel/drivers/cpufreq/intel_pstate.c @@ -0,0 +1,1282 @@ +/* + * intel_pstate.c: Native P state management for Intel processors + * + * (C) Copyright 2012 Intel Corporation + * Author: Dirk Brandewie <dirk.j.brandewie@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/kernel.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/ktime.h> +#include <linux/hrtimer.h> +#include <linux/tick.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/list.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/sysfs.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/debugfs.h> +#include <linux/acpi.h> +#include <trace/events/power.h> + +#include <asm/div64.h> +#include <asm/msr.h> +#include <asm/cpu_device_id.h> +#include <asm/cpufeature.h> + +#define BYT_RATIOS 0x66a +#define BYT_VIDS 0x66b +#define BYT_TURBO_RATIOS 0x66c +#define BYT_TURBO_VIDS 0x66d + +#define FRAC_BITS 8 +#define int_tofp(X) ((int64_t)(X) << FRAC_BITS) +#define fp_toint(X) ((X) >> FRAC_BITS) + + +static inline int32_t mul_fp(int32_t x, int32_t y) +{ + return ((int64_t)x * (int64_t)y) >> FRAC_BITS; +} + +static inline int32_t div_fp(int32_t x, int32_t y) +{ + return div_s64((int64_t)x << FRAC_BITS, y); +} + +static inline int ceiling_fp(int32_t x) +{ + int mask, ret; + + ret = fp_toint(x); + mask = (1 << FRAC_BITS) - 1; + if (x & mask) + ret += 1; + return ret; +} + +struct sample { + int32_t core_pct_busy; + u64 aperf; + u64 mperf; + int freq; + ktime_t time; +}; + +struct pstate_data { + int current_pstate; + int min_pstate; + int max_pstate; + int scaling; + int turbo_pstate; +}; + +struct vid_data { + int min; + int max; + int turbo; + int32_t ratio; +}; + +struct _pid { + int setpoint; + int32_t integral; + int32_t p_gain; + int32_t i_gain; + int32_t d_gain; + int deadband; + int32_t last_err; +}; + +struct cpudata { + int cpu; + + struct timer_list timer; + + struct pstate_data pstate; + struct vid_data vid; + struct _pid pid; + + ktime_t last_sample_time; + u64 prev_aperf; + u64 prev_mperf; + struct sample sample; +}; + +static struct cpudata **all_cpu_data; +struct pstate_adjust_policy { + int sample_rate_ms; + int deadband; + int setpoint; + int p_gain_pct; + int d_gain_pct; + int i_gain_pct; +}; + +struct pstate_funcs { + int (*get_max)(void); + int (*get_min)(void); + int (*get_turbo)(void); + int (*get_scaling)(void); + void (*set)(struct cpudata*, int pstate); + void (*get_vid)(struct cpudata *); +}; + +struct cpu_defaults { + struct pstate_adjust_policy pid_policy; + struct pstate_funcs funcs; +}; + +static struct pstate_adjust_policy pid_params; +static struct pstate_funcs pstate_funcs; +static int hwp_active; + +struct perf_limits { + int no_turbo; + int turbo_disabled; + int max_perf_pct; + int min_perf_pct; + int32_t max_perf; + int32_t min_perf; + int max_policy_pct; + int max_sysfs_pct; + int min_policy_pct; + int min_sysfs_pct; +}; + +static struct perf_limits limits = { + .no_turbo = 0, + .turbo_disabled = 0, + .max_perf_pct = 100, + .max_perf = int_tofp(1), + .min_perf_pct = 0, + .min_perf = 0, + .max_policy_pct = 100, + .max_sysfs_pct = 100, + .min_policy_pct = 0, + .min_sysfs_pct = 0, +}; + +static inline void pid_reset(struct _pid *pid, int setpoint, int busy, + int deadband, int integral) { + pid->setpoint = setpoint; + pid->deadband = deadband; + pid->integral = int_tofp(integral); + pid->last_err = int_tofp(setpoint) - int_tofp(busy); +} + +static inline void pid_p_gain_set(struct _pid *pid, int percent) +{ + pid->p_gain = div_fp(int_tofp(percent), int_tofp(100)); +} + +static inline void pid_i_gain_set(struct _pid *pid, int percent) +{ + pid->i_gain = div_fp(int_tofp(percent), int_tofp(100)); +} + +static inline void pid_d_gain_set(struct _pid *pid, int percent) +{ + pid->d_gain = div_fp(int_tofp(percent), int_tofp(100)); +} + +static signed int pid_calc(struct _pid *pid, int32_t busy) +{ + signed int result; + int32_t pterm, dterm, fp_error; + int32_t integral_limit; + + fp_error = int_tofp(pid->setpoint) - busy; + + if (abs(fp_error) <= int_tofp(pid->deadband)) + return 0; + + pterm = mul_fp(pid->p_gain, fp_error); + + pid->integral += fp_error; + + /* + * We limit the integral here so that it will never + * get higher than 30. This prevents it from becoming + * too large an input over long periods of time and allows + * it to get factored out sooner. + * + * The value of 30 was chosen through experimentation. + */ + integral_limit = int_tofp(30); + if (pid->integral > integral_limit) + pid->integral = integral_limit; + if (pid->integral < -integral_limit) + pid->integral = -integral_limit; + + dterm = mul_fp(pid->d_gain, fp_error - pid->last_err); + pid->last_err = fp_error; + + result = pterm + mul_fp(pid->integral, pid->i_gain) + dterm; + result = result + (1 << (FRAC_BITS-1)); + return (signed int)fp_toint(result); +} + +static inline void intel_pstate_busy_pid_reset(struct cpudata *cpu) +{ + pid_p_gain_set(&cpu->pid, pid_params.p_gain_pct); + pid_d_gain_set(&cpu->pid, pid_params.d_gain_pct); + pid_i_gain_set(&cpu->pid, pid_params.i_gain_pct); + + pid_reset(&cpu->pid, pid_params.setpoint, 100, pid_params.deadband, 0); +} + +static inline void intel_pstate_reset_all_pid(void) +{ + unsigned int cpu; + + for_each_online_cpu(cpu) { + if (all_cpu_data[cpu]) + intel_pstate_busy_pid_reset(all_cpu_data[cpu]); + } +} + +static inline void update_turbo_state(void) +{ + u64 misc_en; + struct cpudata *cpu; + + cpu = all_cpu_data[0]; + rdmsrl(MSR_IA32_MISC_ENABLE, misc_en); + limits.turbo_disabled = + (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE || + cpu->pstate.max_pstate == cpu->pstate.turbo_pstate); +} + +#define PCT_TO_HWP(x) (x * 255 / 100) +static void intel_pstate_hwp_set(void) +{ + int min, max, cpu; + u64 value, freq; + + get_online_cpus(); + + for_each_online_cpu(cpu) { + rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value); + min = PCT_TO_HWP(limits.min_perf_pct); + value &= ~HWP_MIN_PERF(~0L); + value |= HWP_MIN_PERF(min); + + max = PCT_TO_HWP(limits.max_perf_pct); + if (limits.no_turbo) { + rdmsrl( MSR_HWP_CAPABILITIES, freq); + max = HWP_GUARANTEED_PERF(freq); + } + + value &= ~HWP_MAX_PERF(~0L); + value |= HWP_MAX_PERF(max); + wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); + } + + put_online_cpus(); +} + +/************************** debugfs begin ************************/ +static int pid_param_set(void *data, u64 val) +{ + *(u32 *)data = val; + intel_pstate_reset_all_pid(); + return 0; +} + +static int pid_param_get(void *data, u64 *val) +{ + *val = *(u32 *)data; + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_pid_param, pid_param_get, pid_param_set, "%llu\n"); + +struct pid_param { + char *name; + void *value; +}; + +static struct pid_param pid_files[] = { + {"sample_rate_ms", &pid_params.sample_rate_ms}, + {"d_gain_pct", &pid_params.d_gain_pct}, + {"i_gain_pct", &pid_params.i_gain_pct}, + {"deadband", &pid_params.deadband}, + {"setpoint", &pid_params.setpoint}, + {"p_gain_pct", &pid_params.p_gain_pct}, + {NULL, NULL} +}; + +static void __init intel_pstate_debug_expose_params(void) +{ + struct dentry *debugfs_parent; + int i = 0; + + if (hwp_active) + return; + debugfs_parent = debugfs_create_dir("pstate_snb", NULL); + if (IS_ERR_OR_NULL(debugfs_parent)) + return; + while (pid_files[i].name) { + debugfs_create_file(pid_files[i].name, 0660, + debugfs_parent, pid_files[i].value, + &fops_pid_param); + i++; + } +} + +/************************** debugfs end ************************/ + +/************************** sysfs begin ************************/ +#define show_one(file_name, object) \ + static ssize_t show_##file_name \ + (struct kobject *kobj, struct attribute *attr, char *buf) \ + { \ + return sprintf(buf, "%u\n", limits.object); \ + } + +static ssize_t show_turbo_pct(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + struct cpudata *cpu; + int total, no_turbo, turbo_pct; + uint32_t turbo_fp; + + cpu = all_cpu_data[0]; + + total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; + no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1; + turbo_fp = div_fp(int_tofp(no_turbo), int_tofp(total)); + turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100))); + return sprintf(buf, "%u\n", turbo_pct); +} + +static ssize_t show_num_pstates(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + struct cpudata *cpu; + int total; + + cpu = all_cpu_data[0]; + total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; + return sprintf(buf, "%u\n", total); +} + +static ssize_t show_no_turbo(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + ssize_t ret; + + update_turbo_state(); + if (limits.turbo_disabled) + ret = sprintf(buf, "%u\n", limits.turbo_disabled); + else + ret = sprintf(buf, "%u\n", limits.no_turbo); + + return ret; +} + +static ssize_t store_no_turbo(struct kobject *a, struct attribute *b, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + update_turbo_state(); + if (limits.turbo_disabled) { + pr_warn("Turbo disabled by BIOS or unavailable on processor\n"); + return -EPERM; + } + + limits.no_turbo = clamp_t(int, input, 0, 1); + + if (hwp_active) + intel_pstate_hwp_set(); + + return count; +} + +static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + limits.max_sysfs_pct = clamp_t(int, input, 0 , 100); + limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct); + limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100)); + + if (hwp_active) + intel_pstate_hwp_set(); + return count; +} + +static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + limits.min_sysfs_pct = clamp_t(int, input, 0 , 100); + limits.min_perf_pct = max(limits.min_policy_pct, limits.min_sysfs_pct); + limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100)); + + if (hwp_active) + intel_pstate_hwp_set(); + return count; +} + +show_one(max_perf_pct, max_perf_pct); +show_one(min_perf_pct, min_perf_pct); + +define_one_global_rw(no_turbo); +define_one_global_rw(max_perf_pct); +define_one_global_rw(min_perf_pct); +define_one_global_ro(turbo_pct); +define_one_global_ro(num_pstates); + +static struct attribute *intel_pstate_attributes[] = { + &no_turbo.attr, + &max_perf_pct.attr, + &min_perf_pct.attr, + &turbo_pct.attr, + &num_pstates.attr, + NULL +}; + +static struct attribute_group intel_pstate_attr_group = { + .attrs = intel_pstate_attributes, +}; + +static void __init intel_pstate_sysfs_expose_params(void) +{ + struct kobject *intel_pstate_kobject; + int rc; + + intel_pstate_kobject = kobject_create_and_add("intel_pstate", + &cpu_subsys.dev_root->kobj); + BUG_ON(!intel_pstate_kobject); + rc = sysfs_create_group(intel_pstate_kobject, &intel_pstate_attr_group); + BUG_ON(rc); +} +/************************** sysfs end ************************/ + +static void intel_pstate_hwp_enable(void) +{ + hwp_active++; + pr_info("intel_pstate HWP enabled\n"); + + wrmsrl( MSR_PM_ENABLE, 0x1); +} + +static int byt_get_min_pstate(void) +{ + u64 value; + + rdmsrl(BYT_RATIOS, value); + return (value >> 8) & 0x7F; +} + +static int byt_get_max_pstate(void) +{ + u64 value; + + rdmsrl(BYT_RATIOS, value); + return (value >> 16) & 0x7F; +} + +static int byt_get_turbo_pstate(void) +{ + u64 value; + + rdmsrl(BYT_TURBO_RATIOS, value); + return value & 0x7F; +} + +static void byt_set_pstate(struct cpudata *cpudata, int pstate) +{ + u64 val; + int32_t vid_fp; + u32 vid; + + val = pstate << 8; + if (limits.no_turbo && !limits.turbo_disabled) + val |= (u64)1 << 32; + + vid_fp = cpudata->vid.min + mul_fp( + int_tofp(pstate - cpudata->pstate.min_pstate), + cpudata->vid.ratio); + + vid_fp = clamp_t(int32_t, vid_fp, cpudata->vid.min, cpudata->vid.max); + vid = ceiling_fp(vid_fp); + + if (pstate > cpudata->pstate.max_pstate) + vid = cpudata->vid.turbo; + + val |= vid; + + wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val); +} + +#define BYT_BCLK_FREQS 5 +static int byt_freq_table[BYT_BCLK_FREQS] = { 833, 1000, 1333, 1167, 800}; + +static int byt_get_scaling(void) +{ + u64 value; + int i; + + rdmsrl(MSR_FSB_FREQ, value); + i = value & 0x3; + + BUG_ON(i > BYT_BCLK_FREQS); + + return byt_freq_table[i] * 100; +} + +static void byt_get_vid(struct cpudata *cpudata) +{ + u64 value; + + rdmsrl(BYT_VIDS, value); + cpudata->vid.min = int_tofp((value >> 8) & 0x7f); + cpudata->vid.max = int_tofp((value >> 16) & 0x7f); + cpudata->vid.ratio = div_fp( + cpudata->vid.max - cpudata->vid.min, + int_tofp(cpudata->pstate.max_pstate - + cpudata->pstate.min_pstate)); + + rdmsrl(BYT_TURBO_VIDS, value); + cpudata->vid.turbo = value & 0x7f; +} + +static int core_get_min_pstate(void) +{ + u64 value; + + rdmsrl(MSR_PLATFORM_INFO, value); + return (value >> 40) & 0xFF; +} + +static int core_get_max_pstate(void) +{ + u64 value; + + rdmsrl(MSR_PLATFORM_INFO, value); + return (value >> 8) & 0xFF; +} + +static int core_get_turbo_pstate(void) +{ + u64 value; + int nont, ret; + + rdmsrl(MSR_NHM_TURBO_RATIO_LIMIT, value); + nont = core_get_max_pstate(); + ret = (value) & 255; + if (ret <= nont) + ret = nont; + return ret; +} + +static inline int core_get_scaling(void) +{ + return 100000; +} + +static void core_set_pstate(struct cpudata *cpudata, int pstate) +{ + u64 val; + + val = pstate << 8; + if (limits.no_turbo && !limits.turbo_disabled) + val |= (u64)1 << 32; + + wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val); +} + +static int knl_get_turbo_pstate(void) +{ + u64 value; + int nont, ret; + + rdmsrl(MSR_NHM_TURBO_RATIO_LIMIT, value); + nont = core_get_max_pstate(); + ret = (((value) >> 8) & 0xFF); + if (ret <= nont) + ret = nont; + return ret; +} + +static struct cpu_defaults core_params = { + .pid_policy = { + .sample_rate_ms = 10, + .deadband = 0, + .setpoint = 97, + .p_gain_pct = 20, + .d_gain_pct = 0, + .i_gain_pct = 0, + }, + .funcs = { + .get_max = core_get_max_pstate, + .get_min = core_get_min_pstate, + .get_turbo = core_get_turbo_pstate, + .get_scaling = core_get_scaling, + .set = core_set_pstate, + }, +}; + +static struct cpu_defaults byt_params = { + .pid_policy = { + .sample_rate_ms = 10, + .deadband = 0, + .setpoint = 60, + .p_gain_pct = 14, + .d_gain_pct = 0, + .i_gain_pct = 4, + }, + .funcs = { + .get_max = byt_get_max_pstate, + .get_min = byt_get_min_pstate, + .get_turbo = byt_get_turbo_pstate, + .set = byt_set_pstate, + .get_scaling = byt_get_scaling, + .get_vid = byt_get_vid, + }, +}; + +static struct cpu_defaults knl_params = { + .pid_policy = { + .sample_rate_ms = 10, + .deadband = 0, + .setpoint = 97, + .p_gain_pct = 20, + .d_gain_pct = 0, + .i_gain_pct = 0, + }, + .funcs = { + .get_max = core_get_max_pstate, + .get_min = core_get_min_pstate, + .get_turbo = knl_get_turbo_pstate, + .set = core_set_pstate, + }, +}; + +static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max) +{ + int max_perf = cpu->pstate.turbo_pstate; + int max_perf_adj; + int min_perf; + + if (limits.no_turbo || limits.turbo_disabled) + max_perf = cpu->pstate.max_pstate; + + /* + * performance can be limited by user through sysfs, by cpufreq + * policy, or by cpu specific default values determined through + * experimentation. + */ + max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf)); + *max = clamp_t(int, max_perf_adj, + cpu->pstate.min_pstate, cpu->pstate.turbo_pstate); + + min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits.min_perf)); + *min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf); +} + +static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) +{ + int max_perf, min_perf; + + update_turbo_state(); + + intel_pstate_get_min_max(cpu, &min_perf, &max_perf); + + pstate = clamp_t(int, pstate, min_perf, max_perf); + + if (pstate == cpu->pstate.current_pstate) + return; + + trace_cpu_frequency(pstate * cpu->pstate.scaling, cpu->cpu); + + cpu->pstate.current_pstate = pstate; + + pstate_funcs.set(cpu, pstate); +} + +static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) +{ + cpu->pstate.min_pstate = pstate_funcs.get_min(); + cpu->pstate.max_pstate = pstate_funcs.get_max(); + cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(); + cpu->pstate.scaling = pstate_funcs.get_scaling(); + + if (pstate_funcs.get_vid) + pstate_funcs.get_vid(cpu); + intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate); +} + +static inline void intel_pstate_calc_busy(struct cpudata *cpu) +{ + struct sample *sample = &cpu->sample; + int64_t core_pct; + + core_pct = int_tofp(sample->aperf) * int_tofp(100); + core_pct = div64_u64(core_pct, int_tofp(sample->mperf)); + + sample->freq = fp_toint( + mul_fp(int_tofp( + cpu->pstate.max_pstate * cpu->pstate.scaling / 100), + core_pct)); + + sample->core_pct_busy = (int32_t)core_pct; +} + +static inline void intel_pstate_sample(struct cpudata *cpu) +{ + u64 aperf, mperf; + unsigned long flags; + + local_irq_save(flags); + rdmsrl(MSR_IA32_APERF, aperf); + rdmsrl(MSR_IA32_MPERF, mperf); + local_irq_restore(flags); + + cpu->last_sample_time = cpu->sample.time; + cpu->sample.time = ktime_get(); + cpu->sample.aperf = aperf; + cpu->sample.mperf = mperf; + cpu->sample.aperf -= cpu->prev_aperf; + cpu->sample.mperf -= cpu->prev_mperf; + + intel_pstate_calc_busy(cpu); + + cpu->prev_aperf = aperf; + cpu->prev_mperf = mperf; +} + +static inline void intel_hwp_set_sample_time(struct cpudata *cpu) +{ + int delay; + + delay = msecs_to_jiffies(50); + mod_timer_pinned(&cpu->timer, jiffies + delay); +} + +static inline void intel_pstate_set_sample_time(struct cpudata *cpu) +{ + int delay; + + delay = msecs_to_jiffies(pid_params.sample_rate_ms); + mod_timer_pinned(&cpu->timer, jiffies + delay); +} + +static inline int32_t intel_pstate_get_scaled_busy(struct cpudata *cpu) +{ + int32_t core_busy, max_pstate, current_pstate, sample_ratio; + u32 duration_us; + u32 sample_time; + + /* + * core_busy is the ratio of actual performance to max + * max_pstate is the max non turbo pstate available + * current_pstate was the pstate that was requested during + * the last sample period. + * + * We normalize core_busy, which was our actual percent + * performance to what we requested during the last sample + * period. The result will be a percentage of busy at a + * specified pstate. + */ + core_busy = cpu->sample.core_pct_busy; + max_pstate = int_tofp(cpu->pstate.max_pstate); + current_pstate = int_tofp(cpu->pstate.current_pstate); + core_busy = mul_fp(core_busy, div_fp(max_pstate, current_pstate)); + + /* + * Since we have a deferred timer, it will not fire unless + * we are in C0. So, determine if the actual elapsed time + * is significantly greater (3x) than our sample interval. If it + * is, then we were idle for a long enough period of time + * to adjust our busyness. + */ + sample_time = pid_params.sample_rate_ms * USEC_PER_MSEC; + duration_us = (u32) ktime_us_delta(cpu->sample.time, + cpu->last_sample_time); + if (duration_us > sample_time * 3) { + sample_ratio = div_fp(int_tofp(sample_time), + int_tofp(duration_us)); + core_busy = mul_fp(core_busy, sample_ratio); + } + + return core_busy; +} + +static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) +{ + int32_t busy_scaled; + struct _pid *pid; + signed int ctl; + + pid = &cpu->pid; + busy_scaled = intel_pstate_get_scaled_busy(cpu); + + ctl = pid_calc(pid, busy_scaled); + + /* Negative values of ctl increase the pstate and vice versa */ + intel_pstate_set_pstate(cpu, cpu->pstate.current_pstate - ctl); +} + +static void intel_hwp_timer_func(unsigned long __data) +{ + struct cpudata *cpu = (struct cpudata *) __data; + + intel_pstate_sample(cpu); + intel_hwp_set_sample_time(cpu); +} + +static void intel_pstate_timer_func(unsigned long __data) +{ + struct cpudata *cpu = (struct cpudata *) __data; + struct sample *sample; + + intel_pstate_sample(cpu); + + sample = &cpu->sample; + + intel_pstate_adjust_busy_pstate(cpu); + + trace_pstate_sample(fp_toint(sample->core_pct_busy), + fp_toint(intel_pstate_get_scaled_busy(cpu)), + cpu->pstate.current_pstate, + sample->mperf, + sample->aperf, + sample->freq); + + intel_pstate_set_sample_time(cpu); +} + +#define ICPU(model, policy) \ + { X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF,\ + (unsigned long)&policy } + +static const struct x86_cpu_id intel_pstate_cpu_ids[] = { + ICPU(0x2a, core_params), + ICPU(0x2d, core_params), + ICPU(0x37, byt_params), + ICPU(0x3a, core_params), + ICPU(0x3c, core_params), + ICPU(0x3d, core_params), + ICPU(0x3e, core_params), + ICPU(0x3f, core_params), + ICPU(0x45, core_params), + ICPU(0x46, core_params), + ICPU(0x47, core_params), + ICPU(0x4c, byt_params), + ICPU(0x4e, core_params), + ICPU(0x4f, core_params), + ICPU(0x56, core_params), + ICPU(0x57, knl_params), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); + +static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] = { + ICPU(0x56, core_params), + {} +}; + +static int intel_pstate_init_cpu(unsigned int cpunum) +{ + struct cpudata *cpu; + + if (!all_cpu_data[cpunum]) + all_cpu_data[cpunum] = kzalloc(sizeof(struct cpudata), + GFP_KERNEL); + if (!all_cpu_data[cpunum]) + return -ENOMEM; + + cpu = all_cpu_data[cpunum]; + + cpu->cpu = cpunum; + intel_pstate_get_cpu_pstates(cpu); + + init_timer_deferrable(&cpu->timer); + cpu->timer.data = (unsigned long)cpu; + cpu->timer.expires = jiffies + HZ/100; + + if (!hwp_active) + cpu->timer.function = intel_pstate_timer_func; + else + cpu->timer.function = intel_hwp_timer_func; + + intel_pstate_busy_pid_reset(cpu); + intel_pstate_sample(cpu); + + add_timer_on(&cpu->timer, cpunum); + + pr_debug("Intel pstate controlling: cpu %d\n", cpunum); + + return 0; +} + +static unsigned int intel_pstate_get(unsigned int cpu_num) +{ + struct sample *sample; + struct cpudata *cpu; + + cpu = all_cpu_data[cpu_num]; + if (!cpu) + return 0; + sample = &cpu->sample; + return sample->freq; +} + +static int intel_pstate_set_policy(struct cpufreq_policy *policy) +{ + if (!policy->cpuinfo.max_freq) + return -ENODEV; + + if (policy->policy == CPUFREQ_POLICY_PERFORMANCE && + policy->max >= policy->cpuinfo.max_freq) { + limits.min_policy_pct = 100; + limits.min_perf_pct = 100; + limits.min_perf = int_tofp(1); + limits.max_policy_pct = 100; + limits.max_perf_pct = 100; + limits.max_perf = int_tofp(1); + limits.no_turbo = 0; + return 0; + } + + limits.min_policy_pct = (policy->min * 100) / policy->cpuinfo.max_freq; + limits.min_policy_pct = clamp_t(int, limits.min_policy_pct, 0 , 100); + limits.min_perf_pct = max(limits.min_policy_pct, limits.min_sysfs_pct); + limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100)); + + limits.max_policy_pct = (policy->max * 100) / policy->cpuinfo.max_freq; + limits.max_policy_pct = clamp_t(int, limits.max_policy_pct, 0 , 100); + limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct); + limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100)); + + if (hwp_active) + intel_pstate_hwp_set(); + + return 0; +} + +static int intel_pstate_verify_policy(struct cpufreq_policy *policy) +{ + cpufreq_verify_within_cpu_limits(policy); + + if (policy->policy != CPUFREQ_POLICY_POWERSAVE && + policy->policy != CPUFREQ_POLICY_PERFORMANCE) + return -EINVAL; + + return 0; +} + +static void intel_pstate_stop_cpu(struct cpufreq_policy *policy) +{ + int cpu_num = policy->cpu; + struct cpudata *cpu = all_cpu_data[cpu_num]; + + pr_info("intel_pstate CPU %d exiting\n", cpu_num); + + del_timer_sync(&all_cpu_data[cpu_num]->timer); + if (hwp_active) + return; + + intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate); +} + +static int intel_pstate_cpu_init(struct cpufreq_policy *policy) +{ + struct cpudata *cpu; + int rc; + + rc = intel_pstate_init_cpu(policy->cpu); + if (rc) + return rc; + + cpu = all_cpu_data[policy->cpu]; + + if (limits.min_perf_pct == 100 && limits.max_perf_pct == 100) + policy->policy = CPUFREQ_POLICY_PERFORMANCE; + else + policy->policy = CPUFREQ_POLICY_POWERSAVE; + + policy->min = cpu->pstate.min_pstate * cpu->pstate.scaling; + policy->max = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + + /* cpuinfo and default policy values */ + policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling; + policy->cpuinfo.max_freq = + cpu->pstate.turbo_pstate * cpu->pstate.scaling; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + cpumask_set_cpu(policy->cpu, policy->cpus); + + return 0; +} + +static struct cpufreq_driver intel_pstate_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = intel_pstate_verify_policy, + .setpolicy = intel_pstate_set_policy, + .get = intel_pstate_get, + .init = intel_pstate_cpu_init, + .stop_cpu = intel_pstate_stop_cpu, + .name = "intel_pstate", +}; + +static int __initdata no_load; +static int __initdata no_hwp; +static int __initdata hwp_only; +static unsigned int force_load; + +static int intel_pstate_msrs_not_valid(void) +{ + if (!pstate_funcs.get_max() || + !pstate_funcs.get_min() || + !pstate_funcs.get_turbo()) + return -ENODEV; + + return 0; +} + +static void copy_pid_params(struct pstate_adjust_policy *policy) +{ + pid_params.sample_rate_ms = policy->sample_rate_ms; + pid_params.p_gain_pct = policy->p_gain_pct; + pid_params.i_gain_pct = policy->i_gain_pct; + pid_params.d_gain_pct = policy->d_gain_pct; + pid_params.deadband = policy->deadband; + pid_params.setpoint = policy->setpoint; +} + +static void copy_cpu_funcs(struct pstate_funcs *funcs) +{ + pstate_funcs.get_max = funcs->get_max; + pstate_funcs.get_min = funcs->get_min; + pstate_funcs.get_turbo = funcs->get_turbo; + pstate_funcs.get_scaling = funcs->get_scaling; + pstate_funcs.set = funcs->set; + pstate_funcs.get_vid = funcs->get_vid; +} + +#if IS_ENABLED(CONFIG_ACPI) +#include <acpi/processor.h> + +static bool intel_pstate_no_acpi_pss(void) +{ + int i; + + for_each_possible_cpu(i) { + acpi_status status; + union acpi_object *pss; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_processor *pr = per_cpu(processors, i); + + if (!pr) + continue; + + status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer); + if (ACPI_FAILURE(status)) + continue; + + pss = buffer.pointer; + if (pss && pss->type == ACPI_TYPE_PACKAGE) { + kfree(pss); + return false; + } + + kfree(pss); + } + + return true; +} + +static bool intel_pstate_has_acpi_ppc(void) +{ + int i; + + for_each_possible_cpu(i) { + struct acpi_processor *pr = per_cpu(processors, i); + + if (!pr) + continue; + if (acpi_has_method(pr->handle, "_PPC")) + return true; + } + return false; +} + +enum { + PSS, + PPC, +}; + +struct hw_vendor_info { + u16 valid; + char oem_id[ACPI_OEM_ID_SIZE]; + char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; + int oem_pwr_table; +}; + +/* Hardware vendor-specific info that has its own power management modes */ +static struct hw_vendor_info vendor_info[] = { + {1, "HP ", "ProLiant", PSS}, + {1, "ORACLE", "X4-2 ", PPC}, + {1, "ORACLE", "X4-2L ", PPC}, + {1, "ORACLE", "X4-2B ", PPC}, + {1, "ORACLE", "X3-2 ", PPC}, + {1, "ORACLE", "X3-2L ", PPC}, + {1, "ORACLE", "X3-2B ", PPC}, + {1, "ORACLE", "X4470M2 ", PPC}, + {1, "ORACLE", "X4270M3 ", PPC}, + {1, "ORACLE", "X4270M2 ", PPC}, + {1, "ORACLE", "X4170M2 ", PPC}, + {0, "", ""}, +}; + +static bool intel_pstate_platform_pwr_mgmt_exists(void) +{ + struct acpi_table_header hdr; + struct hw_vendor_info *v_info; + const struct x86_cpu_id *id; + u64 misc_pwr; + + id = x86_match_cpu(intel_pstate_cpu_oob_ids); + if (id) { + rdmsrl(MSR_MISC_PWR_MGMT, misc_pwr); + if ( misc_pwr & (1 << 8)) + return true; + } + + if (acpi_disabled || + ACPI_FAILURE(acpi_get_table_header(ACPI_SIG_FADT, 0, &hdr))) + return false; + + for (v_info = vendor_info; v_info->valid; v_info++) { + if (!strncmp(hdr.oem_id, v_info->oem_id, ACPI_OEM_ID_SIZE) && + !strncmp(hdr.oem_table_id, v_info->oem_table_id, + ACPI_OEM_TABLE_ID_SIZE)) + switch (v_info->oem_pwr_table) { + case PSS: + return intel_pstate_no_acpi_pss(); + case PPC: + return intel_pstate_has_acpi_ppc() && + (!force_load); + } + } + + return false; +} +#else /* CONFIG_ACPI not enabled */ +static inline bool intel_pstate_platform_pwr_mgmt_exists(void) { return false; } +static inline bool intel_pstate_has_acpi_ppc(void) { return false; } +#endif /* CONFIG_ACPI */ + +static int __init intel_pstate_init(void) +{ + int cpu, rc = 0; + const struct x86_cpu_id *id; + struct cpu_defaults *cpu_def; + + if (no_load) + return -ENODEV; + + id = x86_match_cpu(intel_pstate_cpu_ids); + if (!id) + return -ENODEV; + + /* + * The Intel pstate driver will be ignored if the platform + * firmware has its own power management modes. + */ + if (intel_pstate_platform_pwr_mgmt_exists()) + return -ENODEV; + + cpu_def = (struct cpu_defaults *)id->driver_data; + + copy_pid_params(&cpu_def->pid_policy); + copy_cpu_funcs(&cpu_def->funcs); + + if (intel_pstate_msrs_not_valid()) + return -ENODEV; + + pr_info("Intel P-state driver initializing.\n"); + + all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus()); + if (!all_cpu_data) + return -ENOMEM; + + if (static_cpu_has_safe(X86_FEATURE_HWP) && !no_hwp) + intel_pstate_hwp_enable(); + + if (!hwp_active && hwp_only) + goto out; + + rc = cpufreq_register_driver(&intel_pstate_driver); + if (rc) + goto out; + + intel_pstate_debug_expose_params(); + intel_pstate_sysfs_expose_params(); + + return rc; +out: + get_online_cpus(); + for_each_online_cpu(cpu) { + if (all_cpu_data[cpu]) { + del_timer_sync(&all_cpu_data[cpu]->timer); + kfree(all_cpu_data[cpu]); + } + } + + put_online_cpus(); + vfree(all_cpu_data); + return -ENODEV; +} +device_initcall(intel_pstate_init); + +static int __init intel_pstate_setup(char *str) +{ + if (!str) + return -EINVAL; + + if (!strcmp(str, "disable")) + no_load = 1; + if (!strcmp(str, "no_hwp")) + no_hwp = 1; + if (!strcmp(str, "force")) + force_load = 1; + if (!strcmp(str, "hwp_only")) + hwp_only = 1; + return 0; +} +early_param("intel_pstate", intel_pstate_setup); + +MODULE_AUTHOR("Dirk Brandewie <dirk.j.brandewie@intel.com>"); +MODULE_DESCRIPTION("'intel_pstate' - P state driver Intel Core processors"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/kirkwood-cpufreq.c b/kernel/drivers/cpufreq/kirkwood-cpufreq.c new file mode 100644 index 000000000..be42f103d --- /dev/null +++ b/kernel/drivers/cpufreq/kirkwood-cpufreq.c @@ -0,0 +1,194 @@ +/* + * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood + * + * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <asm/proc-fns.h> + +#define CPU_SW_INT_BLK BIT(28) + +static struct priv +{ + struct clk *cpu_clk; + struct clk *ddr_clk; + struct clk *powersave_clk; + struct device *dev; + void __iomem *base; +} priv; + +#define STATE_CPU_FREQ 0x01 +#define STATE_DDR_FREQ 0x02 + +/* + * Kirkwood can swap the clock to the CPU between two clocks: + * + * - cpu clk + * - ddr clk + * + * The frequencies are set at runtime before registering this table. + */ +static struct cpufreq_frequency_table kirkwood_freq_table[] = { + {0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */ + {0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */ + {0, 0, CPUFREQ_TABLE_END}, +}; + +static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) +{ + return clk_get_rate(priv.powersave_clk) / 1000; +} + +static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int state = kirkwood_freq_table[index].driver_data; + unsigned long reg; + + local_irq_disable(); + + /* Disable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg |= CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); + + switch (state) { + case STATE_CPU_FREQ: + clk_set_parent(priv.powersave_clk, priv.cpu_clk); + break; + case STATE_DDR_FREQ: + clk_set_parent(priv.powersave_clk, priv.ddr_clk); + break; + } + + /* Wait-for-Interrupt, while the hardware changes frequency */ + cpu_do_idle(); + + /* Enable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg &= ~CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); + + local_irq_enable(); + + return 0; +} + +/* Module init and exit code */ +static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, kirkwood_freq_table, 5000); +} + +static struct cpufreq_driver kirkwood_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .get = kirkwood_cpufreq_get_cpu_frequency, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = kirkwood_cpufreq_target, + .init = kirkwood_cpufreq_cpu_init, + .name = "kirkwood-cpufreq", + .attr = cpufreq_generic_attr, +}; + +static int kirkwood_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + struct resource *res; + int err; + + priv.dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv.base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv.base)) + return PTR_ERR(priv.base); + + np = of_cpu_device_node_get(0); + if (!np) { + dev_err(&pdev->dev, "failed to get cpu device node\n"); + return -ENODEV; + } + + priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk"); + if (IS_ERR(priv.cpu_clk)) { + dev_err(priv.dev, "Unable to get cpuclk"); + return PTR_ERR(priv.cpu_clk); + } + + clk_prepare_enable(priv.cpu_clk); + kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000; + + priv.ddr_clk = of_clk_get_by_name(np, "ddrclk"); + if (IS_ERR(priv.ddr_clk)) { + dev_err(priv.dev, "Unable to get ddrclk"); + err = PTR_ERR(priv.ddr_clk); + goto out_cpu; + } + + clk_prepare_enable(priv.ddr_clk); + kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000; + + priv.powersave_clk = of_clk_get_by_name(np, "powersave"); + if (IS_ERR(priv.powersave_clk)) { + dev_err(priv.dev, "Unable to get powersave"); + err = PTR_ERR(priv.powersave_clk); + goto out_ddr; + } + clk_prepare_enable(priv.powersave_clk); + + of_node_put(np); + np = NULL; + + err = cpufreq_register_driver(&kirkwood_cpufreq_driver); + if (!err) + return 0; + + dev_err(priv.dev, "Failed to register cpufreq driver"); + + clk_disable_unprepare(priv.powersave_clk); +out_ddr: + clk_disable_unprepare(priv.ddr_clk); +out_cpu: + clk_disable_unprepare(priv.cpu_clk); + of_node_put(np); + + return err; +} + +static int kirkwood_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&kirkwood_cpufreq_driver); + + clk_disable_unprepare(priv.powersave_clk); + clk_disable_unprepare(priv.ddr_clk); + clk_disable_unprepare(priv.cpu_clk); + + return 0; +} + +static struct platform_driver kirkwood_cpufreq_platform_driver = { + .probe = kirkwood_cpufreq_probe, + .remove = kirkwood_cpufreq_remove, + .driver = { + .name = "kirkwood-cpufreq", + }, +}; + +module_platform_driver(kirkwood_cpufreq_platform_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch"); +MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU"); +MODULE_ALIAS("platform:kirkwood-cpufreq"); diff --git a/kernel/drivers/cpufreq/longhaul.c b/kernel/drivers/cpufreq/longhaul.c new file mode 100644 index 000000000..0f6b229af --- /dev/null +++ b/kernel/drivers/cpufreq/longhaul.c @@ -0,0 +1,1016 @@ +/* + * (C) 2001-2004 Dave Jones. + * (C) 2002 Padraig Brady. <padraig@antefacto.com> + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon datasheets & sample CPUs kindly provided by VIA. + * + * VIA have currently 3 different versions of Longhaul. + * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. + * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. + * Version 2 of longhaul is backward compatible with v1, but adds + * LONGHAUL MSR for purpose of both frequency and voltage scaling. + * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). + * Version 3 of longhaul got renamed to Powersaver and redesigned + * to use only the POWERSAVER MSR at 0x110a. + * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. + * It's pretty much the same feature wise to longhaul v2, though + * there is provision for scaling FSB too, but this doesn't work + * too well in practice so we don't even try to use this. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <linux/acpi.h> + +#include <asm/msr.h> +#include <asm/cpu_device_id.h> +#include <acpi/processor.h> + +#include "longhaul.h" + +#define PFX "longhaul: " + +#define TYPE_LONGHAUL_V1 1 +#define TYPE_LONGHAUL_V2 2 +#define TYPE_POWERSAVER 3 + +#define CPU_SAMUEL 1 +#define CPU_SAMUEL2 2 +#define CPU_EZRA 3 +#define CPU_EZRA_T 4 +#define CPU_NEHEMIAH 5 +#define CPU_NEHEMIAH_C 6 + +/* Flags */ +#define USE_ACPI_C3 (1 << 1) +#define USE_NORTHBRIDGE (1 << 2) + +static int cpu_model; +static unsigned int numscales = 16; +static unsigned int fsb; + +static const struct mV_pos *vrm_mV_table; +static const unsigned char *mV_vrm_table; + +static unsigned int highest_speed, lowest_speed; /* kHz */ +static unsigned int minmult, maxmult; +static int can_scale_voltage; +static struct acpi_processor *pr; +static struct acpi_processor_cx *cx; +static u32 acpi_regs_addr; +static u8 longhaul_flags; +static unsigned int longhaul_index; + +/* Module parameters */ +static int scale_voltage; +static int disable_acpi_c3; +static int revid_errata; +static int enable; + +/* Clock ratios multiplied by 10 */ +static int mults[32]; +static int eblcr[32]; +static int longhaul_version; +static struct cpufreq_frequency_table *longhaul_table; + +static char speedbuffer[8]; + +static char *print_speed(int speed) +{ + if (speed < 1000) { + snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed); + return speedbuffer; + } + + if (speed%1000 == 0) + snprintf(speedbuffer, sizeof(speedbuffer), + "%dGHz", speed/1000); + else + snprintf(speedbuffer, sizeof(speedbuffer), + "%d.%dGHz", speed/1000, (speed%1000)/100); + + return speedbuffer; +} + + +static unsigned int calc_speed(int mult) +{ + int khz; + khz = (mult/10)*fsb; + if (mult%10) + khz += fsb/2; + khz *= 1000; + return khz; +} + + +static int longhaul_get_cpu_mult(void) +{ + unsigned long invalue = 0, lo, hi; + + rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi); + invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22; + if (longhaul_version == TYPE_LONGHAUL_V2 || + longhaul_version == TYPE_POWERSAVER) { + if (lo & (1<<27)) + invalue += 16; + } + return eblcr[invalue]; +} + +/* For processor with BCR2 MSR */ + +static void do_longhaul1(unsigned int mults_index) +{ + union msr_bcr2 bcr2; + + rdmsrl(MSR_VIA_BCR2, bcr2.val); + /* Enable software clock multiplier */ + bcr2.bits.ESOFTBF = 1; + bcr2.bits.CLOCKMUL = mults_index & 0xff; + + /* Sync to timer tick */ + safe_halt(); + /* Change frequency on next halt or sleep */ + wrmsrl(MSR_VIA_BCR2, bcr2.val); + /* Invoke transition */ + ACPI_FLUSH_CPU_CACHE(); + halt(); + + /* Disable software clock multiplier */ + local_irq_disable(); + rdmsrl(MSR_VIA_BCR2, bcr2.val); + bcr2.bits.ESOFTBF = 0; + wrmsrl(MSR_VIA_BCR2, bcr2.val); +} + +/* For processor with Longhaul MSR */ + +static void do_powersaver(int cx_address, unsigned int mults_index, + unsigned int dir) +{ + union msr_longhaul longhaul; + u32 t; + + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Setup new frequency */ + if (!revid_errata) + longhaul.bits.RevisionKey = longhaul.bits.RevisionID; + else + longhaul.bits.RevisionKey = 0; + longhaul.bits.SoftBusRatio = mults_index & 0xf; + longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4; + /* Setup new voltage */ + if (can_scale_voltage) + longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f; + /* Sync to timer tick */ + safe_halt(); + /* Raise voltage if necessary */ + if (can_scale_voltage && dir) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + } + + /* Change frequency on next halt or sleep */ + longhaul.bits.EnableSoftBusRatio = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + /* Disable bus ratio bit */ + longhaul.bits.EnableSoftBusRatio = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + + /* Reduce voltage if necessary */ + if (can_scale_voltage && !dir) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + } +} + +/** + * longhaul_set_cpu_frequency() + * @mults_index : bitpattern of the new multiplier. + * + * Sets a new clock ratio. + */ + +static int longhaul_setstate(struct cpufreq_policy *policy, + unsigned int table_index) +{ + unsigned int mults_index; + int speed, mult; + struct cpufreq_freqs freqs; + unsigned long flags; + unsigned int pic1_mask, pic2_mask; + u16 bm_status = 0; + u32 bm_timeout = 1000; + unsigned int dir = 0; + + mults_index = longhaul_table[table_index].driver_data; + /* Safety precautions */ + mult = mults[mults_index & 0x1f]; + if (mult == -1) + return -EINVAL; + + speed = calc_speed(mult); + if ((speed > highest_speed) || (speed < lowest_speed)) + return -EINVAL; + + /* Voltage transition before frequency transition? */ + if (can_scale_voltage && longhaul_index < table_index) + dir = 1; + + freqs.old = calc_speed(longhaul_get_cpu_mult()); + freqs.new = speed; + + pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", + fsb, mult/10, mult%10, print_speed(speed/1000)); +retry_loop: + preempt_disable(); + local_irq_save(flags); + + pic2_mask = inb(0xA1); + pic1_mask = inb(0x21); /* works on C3. save mask. */ + outb(0xFF, 0xA1); /* Overkill */ + outb(0xFE, 0x21); /* TMR0 only */ + + /* Wait while PCI bus is busy. */ + if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE + || ((pr != NULL) && pr->flags.bm_control))) { + bm_status = inw(acpi_regs_addr); + bm_status &= 1 << 4; + while (bm_status && bm_timeout) { + outw(1 << 4, acpi_regs_addr); + bm_timeout--; + bm_status = inw(acpi_regs_addr); + bm_status &= 1 << 4; + } + } + + if (longhaul_flags & USE_NORTHBRIDGE) { + /* Disable AGP and PCI arbiters */ + outb(3, 0x22); + } else if ((pr != NULL) && pr->flags.bm_control) { + /* Disable bus master arbitration */ + acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); + } + switch (longhaul_version) { + + /* + * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) + * Software controlled multipliers only. + */ + case TYPE_LONGHAUL_V1: + do_longhaul1(mults_index); + break; + + /* + * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] + * + * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) + * Nehemiah can do FSB scaling too, but this has never been proven + * to work in practice. + */ + case TYPE_LONGHAUL_V2: + case TYPE_POWERSAVER: + if (longhaul_flags & USE_ACPI_C3) { + /* Don't allow wakeup */ + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0); + do_powersaver(cx->address, mults_index, dir); + } else { + do_powersaver(0, mults_index, dir); + } + break; + } + + if (longhaul_flags & USE_NORTHBRIDGE) { + /* Enable arbiters */ + outb(0, 0x22); + } else if ((pr != NULL) && pr->flags.bm_control) { + /* Enable bus master arbitration */ + acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); + } + outb(pic2_mask, 0xA1); /* restore mask */ + outb(pic1_mask, 0x21); + + local_irq_restore(flags); + preempt_enable(); + + freqs.new = calc_speed(longhaul_get_cpu_mult()); + /* Check if requested frequency is set. */ + if (unlikely(freqs.new != speed)) { + printk(KERN_INFO PFX "Failed to set requested frequency!\n"); + /* Revision ID = 1 but processor is expecting revision key + * equal to 0. Jumpers at the bottom of processor will change + * multiplier and FSB, but will not change bits in Longhaul + * MSR nor enable voltage scaling. */ + if (!revid_errata) { + printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " + "option.\n"); + revid_errata = 1; + msleep(200); + goto retry_loop; + } + /* Why ACPI C3 sometimes doesn't work is a mystery for me. + * But it does happen. Processor is entering ACPI C3 state, + * but it doesn't change frequency. I tried poking various + * bits in northbridge registers, but without success. */ + if (longhaul_flags & USE_ACPI_C3) { + printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); + longhaul_flags &= ~USE_ACPI_C3; + if (revid_errata) { + printk(KERN_INFO PFX "Disabling \"Ignore " + "Revision ID\" option.\n"); + revid_errata = 0; + } + msleep(200); + goto retry_loop; + } + /* This shouldn't happen. Longhaul ver. 2 was reported not + * working on processors without voltage scaling, but with + * RevID = 1. RevID errata will make things right. Just + * to be 100% sure. */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); + longhaul_version = TYPE_LONGHAUL_V1; + msleep(200); + goto retry_loop; + } + } + + if (!bm_timeout) { + printk(KERN_INFO PFX "Warning: Timeout while waiting for " + "idle PCI bus.\n"); + return -EBUSY; + } + + return 0; +} + +/* + * Centaur decided to make life a little more tricky. + * Only longhaul v1 is allowed to read EBLCR BSEL[0:1]. + * Samuel2 and above have to try and guess what the FSB is. + * We do this by assuming we booted at maximum multiplier, and interpolate + * between that value multiplied by possible FSBs and cpu_mhz which + * was calculated at boot time. Really ugly, but no other way to do this. + */ + +#define ROUNDING 0xf + +static int guess_fsb(int mult) +{ + int speed = cpu_khz / 1000; + int i; + int speeds[] = { 666, 1000, 1333, 2000 }; + int f_max, f_min; + + for (i = 0; i < 4; i++) { + f_max = ((speeds[i] * mult) + 50) / 100; + f_max += (ROUNDING / 2); + f_min = f_max - ROUNDING; + if ((speed <= f_max) && (speed >= f_min)) + return speeds[i] / 10; + } + return 0; +} + + +static int longhaul_get_ranges(void) +{ + unsigned int i, j, k = 0; + unsigned int ratio; + int mult; + + /* Get current frequency */ + mult = longhaul_get_cpu_mult(); + if (mult == -1) { + printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); + return -EINVAL; + } + fsb = guess_fsb(mult); + if (fsb == 0) { + printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); + return -EINVAL; + } + /* Get max multiplier - as we always did. + * Longhaul MSR is useful only when voltage scaling is enabled. + * C3 is booting at max anyway. */ + maxmult = mult; + /* Get min multiplier */ + switch (cpu_model) { + case CPU_NEHEMIAH: + minmult = 50; + break; + case CPU_NEHEMIAH_C: + minmult = 40; + break; + default: + minmult = 30; + break; + } + + pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n", + minmult/10, minmult%10, maxmult/10, maxmult%10); + + highest_speed = calc_speed(maxmult); + lowest_speed = calc_speed(minmult); + pr_debug("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, + print_speed(lowest_speed/1000), + print_speed(highest_speed/1000)); + + if (lowest_speed == highest_speed) { + printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); + return -EINVAL; + } + if (lowest_speed > highest_speed) { + printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", + lowest_speed, highest_speed); + return -EINVAL; + } + + longhaul_table = kzalloc((numscales + 1) * sizeof(*longhaul_table), + GFP_KERNEL); + if (!longhaul_table) + return -ENOMEM; + + for (j = 0; j < numscales; j++) { + ratio = mults[j]; + if (ratio == -1) + continue; + if (ratio > maxmult || ratio < minmult) + continue; + longhaul_table[k].frequency = calc_speed(ratio); + longhaul_table[k].driver_data = j; + k++; + } + if (k <= 1) { + kfree(longhaul_table); + return -ENODEV; + } + /* Sort */ + for (j = 0; j < k - 1; j++) { + unsigned int min_f, min_i; + min_f = longhaul_table[j].frequency; + min_i = j; + for (i = j + 1; i < k; i++) { + if (longhaul_table[i].frequency < min_f) { + min_f = longhaul_table[i].frequency; + min_i = i; + } + } + if (min_i != j) { + swap(longhaul_table[j].frequency, + longhaul_table[min_i].frequency); + swap(longhaul_table[j].driver_data, + longhaul_table[min_i].driver_data); + } + } + + longhaul_table[k].frequency = CPUFREQ_TABLE_END; + + /* Find index we are running on */ + for (j = 0; j < k; j++) { + if (mults[longhaul_table[j].driver_data & 0x1f] == mult) { + longhaul_index = j; + break; + } + } + return 0; +} + + +static void longhaul_setup_voltagescaling(void) +{ + struct cpufreq_frequency_table *freq_pos; + union msr_longhaul longhaul; + struct mV_pos minvid, maxvid, vid; + unsigned int j, speed, pos, kHz_step, numvscales; + int min_vid_speed; + + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + if (!(longhaul.bits.RevisionID & 1)) { + printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); + return; + } + + if (!longhaul.bits.VRMRev) { + printk(KERN_INFO PFX "VRM 8.5\n"); + vrm_mV_table = &vrm85_mV[0]; + mV_vrm_table = &mV_vrm85[0]; + } else { + printk(KERN_INFO PFX "Mobile VRM\n"); + if (cpu_model < CPU_NEHEMIAH) + return; + vrm_mV_table = &mobilevrm_mV[0]; + mV_vrm_table = &mV_mobilevrm[0]; + } + + minvid = vrm_mV_table[longhaul.bits.MinimumVID]; + maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; + + if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { + printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " + "Voltage scaling disabled.\n", + minvid.mV/1000, minvid.mV%1000, + maxvid.mV/1000, maxvid.mV%1000); + return; + } + + if (minvid.mV == maxvid.mV) { + printk(KERN_INFO PFX "Claims to support voltage scaling but " + "min & max are both %d.%03d. " + "Voltage scaling disabled\n", + maxvid.mV/1000, maxvid.mV%1000); + return; + } + + /* How many voltage steps*/ + numvscales = maxvid.pos - minvid.pos + 1; + printk(KERN_INFO PFX + "Max VID=%d.%03d " + "Min VID=%d.%03d, " + "%d possible voltage scales\n", + maxvid.mV/1000, maxvid.mV%1000, + minvid.mV/1000, minvid.mV%1000, + numvscales); + + /* Calculate max frequency at min voltage */ + j = longhaul.bits.MinMHzBR; + if (longhaul.bits.MinMHzBR4) + j += 16; + min_vid_speed = eblcr[j]; + if (min_vid_speed == -1) + return; + switch (longhaul.bits.MinMHzFSB) { + case 0: + min_vid_speed *= 13333; + break; + case 1: + min_vid_speed *= 10000; + break; + case 3: + min_vid_speed *= 6666; + break; + default: + return; + break; + } + if (min_vid_speed >= highest_speed) + return; + /* Calculate kHz for one voltage step */ + kHz_step = (highest_speed - min_vid_speed) / numvscales; + + cpufreq_for_each_entry(freq_pos, longhaul_table) { + speed = freq_pos->frequency; + if (speed > min_vid_speed) + pos = (speed - min_vid_speed) / kHz_step + minvid.pos; + else + pos = minvid.pos; + freq_pos->driver_data |= mV_vrm_table[pos] << 8; + vid = vrm_mV_table[mV_vrm_table[pos]]; + printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", + speed, (int)(freq_pos - longhaul_table), vid.mV); + } + + can_scale_voltage = 1; + printk(KERN_INFO PFX "Voltage scaling enabled.\n"); +} + + +static int longhaul_target(struct cpufreq_policy *policy, + unsigned int table_index) +{ + unsigned int i; + unsigned int dir = 0; + u8 vid, current_vid; + int retval = 0; + + if (!can_scale_voltage) + retval = longhaul_setstate(policy, table_index); + else { + /* On test system voltage transitions exceeding single + * step up or down were turning motherboard off. Both + * "ondemand" and "userspace" are unsafe. C7 is doing + * this in hardware, C3 is old and we need to do this + * in software. */ + i = longhaul_index; + current_vid = (longhaul_table[longhaul_index].driver_data >> 8); + current_vid &= 0x1f; + if (table_index > longhaul_index) + dir = 1; + while (i != table_index) { + vid = (longhaul_table[i].driver_data >> 8) & 0x1f; + if (vid != current_vid) { + retval = longhaul_setstate(policy, i); + current_vid = vid; + msleep(200); + } + if (dir) + i++; + else + i--; + } + retval = longhaul_setstate(policy, table_index); + } + + longhaul_index = table_index; + return retval; +} + + +static unsigned int longhaul_get(unsigned int cpu) +{ + if (cpu) + return 0; + return calc_speed(longhaul_get_cpu_mult()); +} + +static acpi_status longhaul_walk_callback(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_device *d; + + if (acpi_bus_get_device(obj_handle, &d)) + return 0; + + *return_value = acpi_driver_data(d); + return 1; +} + +/* VIA don't support PM2 reg, but have something similar */ +static int enable_arbiter_disable(void) +{ + struct pci_dev *dev; + int status = 1; + int reg; + u8 pci_cmd; + + /* Find PLE133 host bridge */ + reg = 0x78; + dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, + NULL); + /* Find PM133/VT8605 host bridge */ + if (dev == NULL) + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8605_0, NULL); + /* Find CLE266 host bridge */ + if (dev == NULL) { + reg = 0x76; + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_862X_0, NULL); + /* Find CN400 V-Link host bridge */ + if (dev == NULL) + dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); + } + if (dev != NULL) { + /* Enable access to port 0x22 */ + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + pci_cmd |= 1<<7; + pci_write_config_byte(dev, reg, pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + printk(KERN_ERR PFX + "Can't enable access to port 0x22.\n"); + status = 0; + } + } + pci_dev_put(dev); + return status; + } + return 0; +} + +static int longhaul_setup_southbridge(void) +{ + struct pci_dev *dev; + u8 pci_cmd; + + /* Find VT8235 southbridge */ + dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + if (dev == NULL) + /* Find VT8237 southbridge */ + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8237, NULL); + if (dev != NULL) { + /* Set transition time to max */ + pci_read_config_byte(dev, 0xec, &pci_cmd); + pci_cmd &= ~(1 << 2); + pci_write_config_byte(dev, 0xec, pci_cmd); + pci_read_config_byte(dev, 0xe4, &pci_cmd); + pci_cmd &= ~(1 << 7); + pci_write_config_byte(dev, 0xe4, pci_cmd); + pci_read_config_byte(dev, 0xe5, &pci_cmd); + pci_cmd |= 1 << 7; + pci_write_config_byte(dev, 0xe5, pci_cmd); + /* Get address of ACPI registers block*/ + pci_read_config_byte(dev, 0x81, &pci_cmd); + if (pci_cmd & 1 << 7) { + pci_read_config_dword(dev, 0x88, &acpi_regs_addr); + acpi_regs_addr &= 0xff00; + printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", + acpi_regs_addr); + } + + pci_dev_put(dev); + return 1; + } + return 0; +} + +static int longhaul_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + char *cpuname = NULL; + int ret; + u32 lo, hi; + + /* Check what we have on this motherboard */ + switch (c->x86_model) { + case 6: + cpu_model = CPU_SAMUEL; + cpuname = "C3 'Samuel' [C5A]"; + longhaul_version = TYPE_LONGHAUL_V1; + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr)); + break; + + case 7: + switch (c->x86_mask) { + case 0: + longhaul_version = TYPE_LONGHAUL_V1; + cpu_model = CPU_SAMUEL2; + cpuname = "C3 'Samuel 2' [C5B]"; + /* Note, this is not a typo, early Samuel2's had + * Samuel1 ratios. */ + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); + break; + case 1 ... 15: + longhaul_version = TYPE_LONGHAUL_V2; + if (c->x86_mask < 8) { + cpu_model = CPU_SAMUEL2; + cpuname = "C3 'Samuel 2' [C5B]"; + } else { + cpu_model = CPU_EZRA; + cpuname = "C3 'Ezra' [C5C]"; + } + memcpy(mults, ezra_mults, sizeof(ezra_mults)); + memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr)); + break; + } + break; + + case 8: + cpu_model = CPU_EZRA_T; + cpuname = "C3 'Ezra-T' [C5M]"; + longhaul_version = TYPE_POWERSAVER; + numscales = 32; + memcpy(mults, ezrat_mults, sizeof(ezrat_mults)); + memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr)); + break; + + case 9: + longhaul_version = TYPE_POWERSAVER; + numscales = 32; + memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); + memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); + switch (c->x86_mask) { + case 0 ... 1: + cpu_model = CPU_NEHEMIAH; + cpuname = "C3 'Nehemiah A' [C5XLOE]"; + break; + case 2 ... 4: + cpu_model = CPU_NEHEMIAH; + cpuname = "C3 'Nehemiah B' [C5XLOH]"; + break; + case 5 ... 15: + cpu_model = CPU_NEHEMIAH_C; + cpuname = "C3 'Nehemiah C' [C5P]"; + break; + } + break; + + default: + cpuname = "Unknown"; + break; + } + /* Check Longhaul ver. 2 */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + rdmsr(MSR_VIA_LONGHAUL, lo, hi); + if (lo == 0 && hi == 0) + /* Looks like MSR isn't present */ + longhaul_version = TYPE_LONGHAUL_V1; + } + + printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); + switch (longhaul_version) { + case TYPE_LONGHAUL_V1: + case TYPE_LONGHAUL_V2: + printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); + break; + case TYPE_POWERSAVER: + printk(KERN_CONT "Powersaver supported.\n"); + break; + }; + + /* Doesn't hurt */ + longhaul_setup_southbridge(); + + /* Find ACPI data for processor */ + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, &longhaul_walk_callback, NULL, + NULL, (void *)&pr); + + /* Check ACPI support for C3 state */ + if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { + cx = &pr->power.states[ACPI_STATE_C3]; + if (cx->address > 0 && cx->latency <= 1000) + longhaul_flags |= USE_ACPI_C3; + } + /* Disable if it isn't working */ + if (disable_acpi_c3) + longhaul_flags &= ~USE_ACPI_C3; + /* Check if northbridge is friendly */ + if (enable_arbiter_disable()) + longhaul_flags |= USE_NORTHBRIDGE; + + /* Check ACPI support for bus master arbiter disable */ + if (!(longhaul_flags & USE_ACPI_C3 + || longhaul_flags & USE_NORTHBRIDGE) + && ((pr == NULL) || !(pr->flags.bm_control))) { + printk(KERN_ERR PFX + "No ACPI support. Unsupported northbridge.\n"); + return -ENODEV; + } + + if (longhaul_flags & USE_NORTHBRIDGE) + printk(KERN_INFO PFX "Using northbridge support.\n"); + if (longhaul_flags & USE_ACPI_C3) + printk(KERN_INFO PFX "Using ACPI support.\n"); + + ret = longhaul_get_ranges(); + if (ret != 0) + return ret; + + if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) + longhaul_setup_voltagescaling(); + + policy->cpuinfo.transition_latency = 200000; /* nsec */ + + return cpufreq_table_validate_and_show(policy, longhaul_table); +} + +static struct cpufreq_driver longhaul_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = longhaul_target, + .get = longhaul_get, + .init = longhaul_cpu_init, + .name = "longhaul", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id longhaul_id[] = { + { X86_VENDOR_CENTAUR, 6 }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, longhaul_id); + +static int __init longhaul_init(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + + if (!x86_match_cpu(longhaul_id)) + return -ENODEV; + + if (!enable) { + printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n"); + return -ENODEV; + } +#ifdef CONFIG_SMP + if (num_online_cpus() > 1) { + printk(KERN_ERR PFX "More than 1 CPU detected, " + "longhaul disabled.\n"); + return -ENODEV; + } +#endif +#ifdef CONFIG_X86_IO_APIC + if (cpu_has_apic) { + printk(KERN_ERR PFX "APIC detected. Longhaul is currently " + "broken in this configuration.\n"); + return -ENODEV; + } +#endif + switch (c->x86_model) { + case 6 ... 9: + return cpufreq_register_driver(&longhaul_driver); + case 10: + printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); + default: + ; + } + + return -ENODEV; +} + + +static void __exit longhaul_exit(void) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(0); + int i; + + for (i = 0; i < numscales; i++) { + if (mults[i] == maxmult) { + struct cpufreq_freqs freqs; + + freqs.old = policy->cur; + freqs.new = longhaul_table[i].frequency; + freqs.flags = 0; + + cpufreq_freq_transition_begin(policy, &freqs); + longhaul_setstate(policy, i); + cpufreq_freq_transition_end(policy, &freqs, 0); + break; + } + } + + cpufreq_cpu_put(policy); + cpufreq_unregister_driver(&longhaul_driver); + kfree(longhaul_table); +} + +/* Even if BIOS is exporting ACPI C3 state, and it is used + * with success when CPU is idle, this state doesn't + * trigger frequency transition in some cases. */ +module_param(disable_acpi_c3, int, 0644); +MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); +/* Change CPU voltage with frequency. Very useful to save + * power, but most VIA C3 processors aren't supporting it. */ +module_param(scale_voltage, int, 0644); +MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); +/* Force revision key to 0 for processors which doesn't + * support voltage scaling, but are introducing itself as + * such. */ +module_param(revid_errata, int, 0644); +MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); +/* By default driver is disabled to prevent incompatible + * system freeze. */ +module_param(enable, int, 0644); +MODULE_PARM_DESC(enable, "Enable driver"); + +MODULE_AUTHOR("Dave Jones"); +MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors."); +MODULE_LICENSE("GPL"); + +late_initcall(longhaul_init); +module_exit(longhaul_exit); diff --git a/kernel/drivers/cpufreq/longhaul.h b/kernel/drivers/cpufreq/longhaul.h new file mode 100644 index 000000000..1928b923a --- /dev/null +++ b/kernel/drivers/cpufreq/longhaul.h @@ -0,0 +1,353 @@ +/* + * longhaul.h + * (C) 2003 Dave Jones. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * VIA-specific information + */ + +union msr_bcr2 { + struct { + unsigned Reseved:19, // 18:0 + ESOFTBF:1, // 19 + Reserved2:3, // 22:20 + CLOCKMUL:4, // 26:23 + Reserved3:5; // 31:27 + } bits; + unsigned long val; +}; + +union msr_longhaul { + struct { + unsigned RevisionID:4, // 3:0 + RevisionKey:4, // 7:4 + EnableSoftBusRatio:1, // 8 + EnableSoftVID:1, // 9 + EnableSoftBSEL:1, // 10 + Reserved:3, // 11:13 + SoftBusRatio4:1, // 14 + VRMRev:1, // 15 + SoftBusRatio:4, // 19:16 + SoftVID:5, // 24:20 + Reserved2:3, // 27:25 + SoftBSEL:2, // 29:28 + Reserved3:2, // 31:30 + MaxMHzBR:4, // 35:32 + MaximumVID:5, // 40:36 + MaxMHzFSB:2, // 42:41 + MaxMHzBR4:1, // 43 + Reserved4:4, // 47:44 + MinMHzBR:4, // 51:48 + MinimumVID:5, // 56:52 + MinMHzFSB:2, // 58:57 + MinMHzBR4:1, // 59 + Reserved5:4; // 63:60 + } bits; + unsigned long long val; +}; + +/* + * Clock ratio tables. Div/Mod by 10 to get ratio. + * The eblcr values specify the ratio read from the CPU. + * The mults values specify what to write to the CPU. + */ + +/* + * VIA C3 Samuel 1 & Samuel 2 (stepping 0) + */ +static const int samuel1_mults[16] = { + -1, /* 0000 -> RESERVED */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + -1, /* 0011 -> RESERVED */ + -1, /* 0100 -> RESERVED */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + -1, /* 1110 -> RESERVED */ + -1, /* 1111 -> RESERVED */ +}; + +static const int samuel1_eblcr[16] = { + 50, /* 0000 -> RESERVED */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + -1, /* 0011 -> RESERVED */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + -1, /* 0111 -> RESERVED */ + -1, /* 1000 -> RESERVED */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + -1, /* 1100 -> RESERVED */ + 75, /* 1101 -> 7.5x */ + -1, /* 1110 -> RESERVED */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 Samuel2 Stepping 1->15 + */ +static const int samuel2_eblcr[16] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 110, /* 0111 -> 11.0x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 130, /* 1110 -> 13.0x */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 Ezra + */ +static const int ezra_mults[16] = { + 100, /* 0000 -> 10.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ +}; + +static const int ezra_eblcr[16] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 (Ezra-T) [C5M]. + */ +static const int ezrat_mults[32] = { + 100, /* 0000 -> 10.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ + + -1, /* 0000 -> RESERVED (10.0x) */ + 110, /* 0001 -> 11.0x */ + -1, /* 0010 -> 12.0x */ + -1, /* 0011 -> RESERVED (9.0x)*/ + 105, /* 0100 -> 10.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 135, /* 0111 -> 13.5x */ + 140, /* 1000 -> 14.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 130, /* 1011 -> 13.0x */ + 145, /* 1100 -> 14.5x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + -1, /* 1111 -> RESERVED (12.0x) */ +}; + +static const int ezrat_eblcr[32] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ + + -1, /* 0000 -> RESERVED (9.0x) */ + 110, /* 0001 -> 11.0x */ + 120, /* 0010 -> 12.0x */ + -1, /* 0011 -> RESERVED (10.0x)*/ + 135, /* 0100 -> 13.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 105, /* 0111 -> 10.5x */ + 130, /* 1000 -> 13.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 140, /* 1011 -> 14.0x */ + -1, /* 1100 -> RESERVED (12.0x) */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + 145, /* 1111 -> 14.5x */ +}; + +/* + * VIA C3 Nehemiah */ + +static const int nehemiah_mults[32] = { + 100, /* 0000 -> 10.0x */ + -1, /* 0001 -> 16.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + -1, /* 0101 -> RESERVED */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ + -1, /* 0000 -> 10.0x */ + 110, /* 0001 -> 11.0x */ + -1, /* 0010 -> 12.0x */ + -1, /* 0011 -> 9.0x */ + 105, /* 0100 -> 10.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 135, /* 0111 -> 13.5x */ + 140, /* 1000 -> 14.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 130, /* 1011 -> 13.0x */ + 145, /* 1100 -> 14.5x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + -1, /* 1111 -> 12.0x */ +}; + +static const int nehemiah_eblcr[32] = { + 50, /* 0000 -> 5.0x */ + 160, /* 0001 -> 16.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + -1, /* 0101 -> RESERVED */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ + 90, /* 0000 -> 9.0x */ + 110, /* 0001 -> 11.0x */ + 120, /* 0010 -> 12.0x */ + 100, /* 0011 -> 10.0x */ + 135, /* 0100 -> 13.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 105, /* 0111 -> 10.5x */ + 130, /* 1000 -> 13.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 140, /* 1011 -> 14.0x */ + 120, /* 1100 -> 12.0x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + 145 /* 1111 -> 14.5x */ +}; + +/* + * Voltage scales. Div/Mod by 1000 to get actual voltage. + * Which scale to use depends on the VRM type in use. + */ + +struct mV_pos { + unsigned short mV; + unsigned short pos; +}; + +static const struct mV_pos vrm85_mV[32] = { + {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, + {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, + {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, + {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10}, + {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3}, + {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27}, + {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19}, + {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} +}; + +static const unsigned char mV_vrm85[32] = { + 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, + 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, + 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, + 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 +}; + +static const struct mV_pos mobilevrm_mV[32] = { + {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, + {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, + {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, + {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16}, + {975, 15}, {950, 14}, {925, 13}, {900, 12}, + {875, 11}, {850, 10}, {825, 9}, {800, 8}, + {775, 7}, {750, 6}, {725, 5}, {700, 4}, + {675, 3}, {650, 2}, {625, 1}, {600, 0} +}; + +static const unsigned char mV_mobilevrm[32] = { + 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, + 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, + 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, + 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00 +}; + diff --git a/kernel/drivers/cpufreq/longrun.c b/kernel/drivers/cpufreq/longrun.c new file mode 100644 index 000000000..074971b12 --- /dev/null +++ b/kernel/drivers/cpufreq/longrun.c @@ -0,0 +1,324 @@ +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/timex.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpu_device_id.h> + +static struct cpufreq_driver longrun_driver; + +/** + * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz + * values into per cent values. In TMTA microcode, the following is valid: + * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) + */ +static unsigned int longrun_low_freq, longrun_high_freq; + + +/** + * longrun_get_policy - get the current LongRun policy + * @policy: struct cpufreq_policy where current policy is written into + * + * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS + * and MSR_TMTA_LONGRUN_CTRL + */ +static void longrun_get_policy(struct cpufreq_policy *policy) +{ + u32 msr_lo, msr_hi; + + rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi); + if (msr_lo & 0x01) + policy->policy = CPUFREQ_POLICY_PERFORMANCE; + else + policy->policy = CPUFREQ_POLICY_POWERSAVE; + + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi); + msr_lo &= 0x0000007F; + msr_hi &= 0x0000007F; + + if (longrun_high_freq <= longrun_low_freq) { + /* Assume degenerate Longrun table */ + policy->min = policy->max = longrun_high_freq; + } else { + policy->min = longrun_low_freq + msr_lo * + ((longrun_high_freq - longrun_low_freq) / 100); + policy->max = longrun_low_freq + msr_hi * + ((longrun_high_freq - longrun_low_freq) / 100); + } + policy->cpu = 0; +} + + +/** + * longrun_set_policy - sets a new CPUFreq policy + * @policy: new policy + * + * Sets a new CPUFreq policy on LongRun-capable processors. This function + * has to be called with cpufreq_driver locked. + */ +static int longrun_set_policy(struct cpufreq_policy *policy) +{ + u32 msr_lo, msr_hi; + u32 pctg_lo, pctg_hi; + + if (!policy) + return -EINVAL; + + if (longrun_high_freq <= longrun_low_freq) { + /* Assume degenerate Longrun table */ + pctg_lo = pctg_hi = 100; + } else { + pctg_lo = (policy->min - longrun_low_freq) / + ((longrun_high_freq - longrun_low_freq) / 100); + pctg_hi = (policy->max - longrun_low_freq) / + ((longrun_high_freq - longrun_low_freq) / 100); + } + + if (pctg_hi > 100) + pctg_hi = 100; + if (pctg_lo > pctg_hi) + pctg_lo = pctg_hi; + + /* performance or economy mode */ + rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + msr_lo &= 0xFFFFFFFE; + switch (policy->policy) { + case CPUFREQ_POLICY_PERFORMANCE: + msr_lo |= 0x00000001; + break; + case CPUFREQ_POLICY_POWERSAVE: + break; + } + wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + + /* lower and upper boundary */ + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + msr_lo &= 0xFFFFFF80; + msr_hi &= 0xFFFFFF80; + msr_lo |= pctg_lo; + msr_hi |= pctg_hi; + wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + + return 0; +} + + +/** + * longrun_verify_poliy - verifies a new CPUFreq policy + * @policy: the policy to verify + * + * Validates a new CPUFreq policy. This function has to be called with + * cpufreq_driver locked. + */ +static int longrun_verify_policy(struct cpufreq_policy *policy) +{ + if (!policy) + return -EINVAL; + + policy->cpu = 0; + cpufreq_verify_within_cpu_limits(policy); + + if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && + (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) + return -EINVAL; + + return 0; +} + +static unsigned int longrun_get(unsigned int cpu) +{ + u32 eax, ebx, ecx, edx; + + if (cpu) + return 0; + + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + pr_debug("cpuid eax is %u\n", eax); + + return eax * 1000; +} + +/** + * longrun_determine_freqs - determines the lowest and highest possible core frequency + * @low_freq: an int to put the lowest frequency into + * @high_freq: an int to put the highest frequency into + * + * Determines the lowest and highest possible core frequencies on this CPU. + * This is necessary to calculate the performance percentage according to + * TMTA rules: + * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq) + */ +static int longrun_determine_freqs(unsigned int *low_freq, + unsigned int *high_freq) +{ + u32 msr_lo, msr_hi; + u32 save_lo, save_hi; + u32 eax, ebx, ecx, edx; + u32 try_hi; + struct cpuinfo_x86 *c = &cpu_data(0); + + if (!low_freq || !high_freq) + return -EINVAL; + + if (cpu_has(c, X86_FEATURE_LRTI)) { + /* if the LongRun Table Interface is present, the + * detection is a bit easier: + * For minimum frequency, read out the maximum + * level (msr_hi), write that into "currently + * selected level", and read out the frequency. + * For maximum frequency, read out level zero. + */ + /* minimum */ + rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi); + wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi); + rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); + *low_freq = msr_lo * 1000; /* to kHz */ + + /* maximum */ + wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi); + rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); + *high_freq = msr_lo * 1000; /* to kHz */ + + pr_debug("longrun table interface told %u - %u kHz\n", + *low_freq, *high_freq); + + if (*low_freq > *high_freq) + *low_freq = *high_freq; + return 0; + } + + /* set the upper border to the value determined during TSC init */ + *high_freq = (cpu_khz / 1000); + *high_freq = *high_freq * 1000; + pr_debug("high frequency is %u kHz\n", *high_freq); + + /* get current borders */ + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + save_lo = msr_lo & 0x0000007F; + save_hi = msr_hi & 0x0000007F; + + /* if current perf_pctg is larger than 90%, we need to decrease the + * upper limit to make the calculation more accurate. + */ + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + /* try decreasing in 10% steps, some processors react only + * on some barrier values */ + for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { + /* set to 0 to try_hi perf_pctg */ + msr_lo &= 0xFFFFFF80; + msr_hi &= 0xFFFFFF80; + msr_hi |= try_hi; + wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + + /* read out current core MHz and current perf_pctg */ + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + + /* restore values */ + wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); + } + pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax); + + /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) + * eqals + * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) + * + * high_freq * perf_pctg is stored tempoarily into "ebx". + */ + ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */ + + if ((ecx > 95) || (ecx == 0) || (eax < ebx)) + return -EIO; + + edx = ((eax - ebx) * 100) / (100 - ecx); + *low_freq = edx * 1000; /* back to kHz */ + + pr_debug("low frequency is %u kHz\n", *low_freq); + + if (*low_freq > *high_freq) + *low_freq = *high_freq; + + return 0; +} + + +static int longrun_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + /* detect low and high frequency */ + result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq); + if (result) + return result; + + /* cpuinfo and default policy values */ + policy->cpuinfo.min_freq = longrun_low_freq; + policy->cpuinfo.max_freq = longrun_high_freq; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + longrun_get_policy(policy); + + return 0; +} + + +static struct cpufreq_driver longrun_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = longrun_verify_policy, + .setpolicy = longrun_set_policy, + .get = longrun_get, + .init = longrun_cpu_init, + .name = "longrun", +}; + +static const struct x86_cpu_id longrun_ids[] = { + { X86_VENDOR_TRANSMETA, X86_FAMILY_ANY, X86_MODEL_ANY, + X86_FEATURE_LONGRUN }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, longrun_ids); + +/** + * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver + * + * Initializes the LongRun support. + */ +static int __init longrun_init(void) +{ + if (!x86_match_cpu(longrun_ids)) + return -ENODEV; + return cpufreq_register_driver(&longrun_driver); +} + + +/** + * longrun_exit - unregisters LongRun support + */ +static void __exit longrun_exit(void) +{ + cpufreq_unregister_driver(&longrun_driver); +} + + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " + "Efficeon processors."); +MODULE_LICENSE("GPL"); + +module_init(longrun_init); +module_exit(longrun_exit); diff --git a/kernel/drivers/cpufreq/loongson2_cpufreq.c b/kernel/drivers/cpufreq/loongson2_cpufreq.c new file mode 100644 index 000000000..fc897baba --- /dev/null +++ b/kernel/drivers/cpufreq/loongson2_cpufreq.c @@ -0,0 +1,200 @@ +/* + * Cpufreq driver for the loongson-2 processors + * + * The 2E revision of loongson processor not support this feature. + * + * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/sched.h> /* set_cpus_allowed() */ +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <asm/clock.h> +#include <asm/idle.h> + +#include <asm/mach-loongson/loongson.h> + +static uint nowait; + +static void (*saved_cpu_wait) (void); + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data); + +static struct notifier_block loongson2_cpufreq_notifier_block = { + .notifier_call = loongson2_cpu_freq_notifier +}; + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + current_cpu_data.udelay_val = loops_per_jiffy; + + return 0; +} + +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int loongson2_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int cpu = policy->cpu; + cpumask_t cpus_allowed; + unsigned int freq; + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + + freq = + ((cpu_clock_freq / 1000) * + loongson2_clockmod_table[index].driver_data) / 8; + + set_cpus_allowed_ptr(current, &cpus_allowed); + + /* setting the cpu frequency */ + clk_set_rate(policy->clk, freq * 1000); + + return 0; +} + +static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct clk *cpuclk; + int i; + unsigned long rate; + int ret; + + cpuclk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(cpuclk)) { + printk(KERN_ERR "cpufreq: couldn't get CPU clk\n"); + return PTR_ERR(cpuclk); + } + + rate = cpu_clock_freq / 1000; + if (!rate) { + clk_put(cpuclk); + return -EINVAL; + } + + /* clock table init */ + for (i = 2; + (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END); + i++) + loongson2_clockmod_table[i].frequency = (rate * i) / 8; + + ret = clk_set_rate(cpuclk, rate * 1000); + if (ret) { + clk_put(cpuclk); + return ret; + } + + policy->clk = cpuclk; + return cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0); +} + +static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) +{ + clk_put(policy->clk); + return 0; +} + +static struct cpufreq_driver loongson2_cpufreq_driver = { + .name = "loongson2", + .init = loongson2_cpufreq_cpu_init, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = loongson2_cpufreq_target, + .get = cpufreq_generic_get, + .exit = loongson2_cpufreq_exit, + .attr = cpufreq_generic_attr, +}; + +static struct platform_device_id platform_device_ids[] = { + { + .name = "loongson2_cpufreq", + }, + {} +}; + +MODULE_DEVICE_TABLE(platform, platform_device_ids); + +static struct platform_driver platform_driver = { + .driver = { + .name = "loongson2_cpufreq", + }, + .id_table = platform_device_ids, +}; + +/* + * This is the simple version of Loongson-2 wait, Maybe we need do this in + * interrupt disabled context. + */ + +static DEFINE_SPINLOCK(loongson2_wait_lock); + +static void loongson2_cpu_wait(void) +{ + unsigned long flags; + u32 cpu_freq; + + spin_lock_irqsave(&loongson2_wait_lock, flags); + cpu_freq = LOONGSON_CHIPCFG(0); + LOONGSON_CHIPCFG(0) &= ~0x7; /* Put CPU into wait mode */ + LOONGSON_CHIPCFG(0) = cpu_freq; /* Restore CPU state */ + spin_unlock_irqrestore(&loongson2_wait_lock, flags); + local_irq_enable(); +} + +static int __init cpufreq_init(void) +{ + int ret; + + /* Register platform stuff */ + ret = platform_driver_register(&platform_driver); + if (ret) + return ret; + + pr_info("cpufreq: Loongson-2F CPU frequency driver.\n"); + + cpufreq_register_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + ret = cpufreq_register_driver(&loongson2_cpufreq_driver); + + if (!ret && !nowait) { + saved_cpu_wait = cpu_wait; + cpu_wait = loongson2_cpu_wait; + } + + return ret; +} + +static void __exit cpufreq_exit(void) +{ + if (!nowait && saved_cpu_wait) + cpu_wait = saved_cpu_wait; + cpufreq_unregister_driver(&loongson2_cpufreq_driver); + cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + platform_driver_unregister(&platform_driver); +} + +module_init(cpufreq_init); +module_exit(cpufreq_exit); + +module_param(nowait, uint, 0644); +MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait"); + +MODULE_AUTHOR("Yanhua <yanh@lemote.com>"); +MODULE_DESCRIPTION("cpufreq driver for Loongson2F"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/ls1x-cpufreq.c b/kernel/drivers/cpufreq/ls1x-cpufreq.c new file mode 100644 index 000000000..f0913eee2 --- /dev/null +++ b/kernel/drivers/cpufreq/ls1x-cpufreq.c @@ -0,0 +1,222 @@ +/* + * CPU Frequency Scaling for Loongson 1 SoC + * + * Copyright (C) 2014 Zhang, Keguang <keguang.zhang@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/mach-loongson1/cpufreq.h> +#include <asm/mach-loongson1/loongson1.h> + +static struct { + struct device *dev; + struct clk *clk; /* CPU clk */ + struct clk *mux_clk; /* MUX of CPU clk */ + struct clk *pll_clk; /* PLL clk */ + struct clk *osc_clk; /* OSC clk */ + unsigned int max_freq; + unsigned int min_freq; +} ls1x_cpufreq; + +static int ls1x_cpufreq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + current_cpu_data.udelay_val = loops_per_jiffy; + + return NOTIFY_OK; +} + +static struct notifier_block ls1x_cpufreq_notifier_block = { + .notifier_call = ls1x_cpufreq_notifier +}; + +static int ls1x_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int old_freq, new_freq; + + old_freq = policy->cur; + new_freq = policy->freq_table[index].frequency; + + /* + * The procedure of reconfiguring CPU clk is as below. + * + * - Reparent CPU clk to OSC clk + * - Reset CPU clock (very important) + * - Reconfigure CPU DIV + * - Reparent CPU clk back to CPU DIV clk + */ + + dev_dbg(ls1x_cpufreq.dev, "%u KHz --> %u KHz\n", old_freq, new_freq); + clk_set_parent(policy->clk, ls1x_cpufreq.osc_clk); + __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU, + LS1X_CLK_PLL_DIV); + __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU), + LS1X_CLK_PLL_DIV); + clk_set_rate(ls1x_cpufreq.mux_clk, new_freq * 1000); + clk_set_parent(policy->clk, ls1x_cpufreq.mux_clk); + + return 0; +} + +static int ls1x_cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_tbl; + unsigned int pll_freq, freq; + int steps, i, ret; + + pll_freq = clk_get_rate(ls1x_cpufreq.pll_clk) / 1000; + + steps = 1 << DIV_CPU_WIDTH; + freq_tbl = kzalloc(sizeof(*freq_tbl) * steps, GFP_KERNEL); + if (!freq_tbl) { + dev_err(ls1x_cpufreq.dev, + "failed to alloc cpufreq_frequency_table\n"); + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < (steps - 1); i++) { + freq = pll_freq / (i + 1); + if ((freq < ls1x_cpufreq.min_freq) || + (freq > ls1x_cpufreq.max_freq)) + freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID; + else + freq_tbl[i].frequency = freq; + dev_dbg(ls1x_cpufreq.dev, + "cpufreq table: index %d: frequency %d\n", i, + freq_tbl[i].frequency); + } + freq_tbl[i].frequency = CPUFREQ_TABLE_END; + + policy->clk = ls1x_cpufreq.clk; + ret = cpufreq_generic_init(policy, freq_tbl, 0); + if (ret) + kfree(freq_tbl); +out: + return ret; +} + +static int ls1x_cpufreq_exit(struct cpufreq_policy *policy) +{ + kfree(policy->freq_table); + return 0; +} + +static struct cpufreq_driver ls1x_cpufreq_driver = { + .name = "cpufreq-ls1x", + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = ls1x_cpufreq_target, + .get = cpufreq_generic_get, + .init = ls1x_cpufreq_init, + .exit = ls1x_cpufreq_exit, + .attr = cpufreq_generic_attr, +}; + +static int ls1x_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_notifier(&ls1x_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + cpufreq_unregister_driver(&ls1x_cpufreq_driver); + + return 0; +} + +static int ls1x_cpufreq_probe(struct platform_device *pdev) +{ + struct plat_ls1x_cpufreq *pdata = pdev->dev.platform_data; + struct clk *clk; + int ret; + + if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) + return -EINVAL; + + ls1x_cpufreq.dev = &pdev->dev; + + clk = devm_clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(clk)) { + dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n", + pdata->clk_name); + ret = PTR_ERR(clk); + goto out; + } + ls1x_cpufreq.clk = clk; + + clk = clk_get_parent(clk); + if (IS_ERR(clk)) { + dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n", + __clk_get_name(ls1x_cpufreq.clk)); + ret = PTR_ERR(clk); + goto out; + } + ls1x_cpufreq.mux_clk = clk; + + clk = clk_get_parent(clk); + if (IS_ERR(clk)) { + dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n", + __clk_get_name(ls1x_cpufreq.mux_clk)); + ret = PTR_ERR(clk); + goto out; + } + ls1x_cpufreq.pll_clk = clk; + + clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name); + if (IS_ERR(clk)) { + dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n", + pdata->osc_clk_name); + ret = PTR_ERR(clk); + goto out; + } + ls1x_cpufreq.osc_clk = clk; + + ls1x_cpufreq.max_freq = pdata->max_freq; + ls1x_cpufreq.min_freq = pdata->min_freq; + + ret = cpufreq_register_driver(&ls1x_cpufreq_driver); + if (ret) { + dev_err(ls1x_cpufreq.dev, + "failed to register cpufreq driver: %d\n", ret); + goto out; + } + + ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + if (!ret) + goto out; + + dev_err(ls1x_cpufreq.dev, "failed to register cpufreq notifier: %d\n", + ret); + + cpufreq_unregister_driver(&ls1x_cpufreq_driver); +out: + return ret; +} + +static struct platform_driver ls1x_cpufreq_platdrv = { + .driver = { + .name = "ls1x-cpufreq", + }, + .probe = ls1x_cpufreq_probe, + .remove = ls1x_cpufreq_remove, +}; + +module_platform_driver(ls1x_cpufreq_platdrv); + +MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>"); +MODULE_DESCRIPTION("Loongson 1 CPUFreq driver"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/maple-cpufreq.c b/kernel/drivers/cpufreq/maple-cpufreq.c new file mode 100644 index 000000000..cc3408fc0 --- /dev/null +++ b/kernel/drivers/cpufreq/maple-cpufreq.c @@ -0,0 +1,246 @@ +/* + * Copyright (C) 2011 Dmitry Eremin-Solenikov + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#undef DEBUG + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/mutex.h> +#include <linux/time.h> +#include <linux/of_device.h> + +#define DBG(fmt...) pr_debug(fmt) + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table maple_cpu_freqs[] = { + {0, CPUFREQ_HIGH, 0}, + {0, CPUFREQ_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retrieved from the device-tree + */ +static int maple_pmode_cur; + +static const u32 *maple_pmode_data; +static int maple_pmode_max; + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int maple_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; + + local_irq_save(flags); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + maple_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + local_irq_restore(flags); + + maple_pmode_cur = speed_mode; + ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int maple_scom_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= maple_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* + * Common interface to the cpufreq core + */ + +static int maple_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + return maple_scom_switch_freq(index); +} + +static unsigned int maple_cpufreq_get_speed(unsigned int cpu) +{ + return maple_cpu_freqs[maple_pmode_cur].frequency; +} + +static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, maple_cpu_freqs, 12000); +} + +static struct cpufreq_driver maple_cpufreq_driver = { + .name = "maple", + .flags = CPUFREQ_CONST_LOOPS, + .init = maple_cpufreq_cpu_init, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = maple_cpufreq_target, + .get = maple_cpufreq_get_speed, + .attr = cpufreq_generic_attr, +}; + +static int __init maple_cpufreq_init(void) +{ + struct device_node *cpunode; + unsigned int psize; + unsigned long max_freq; + const u32 *valp; + u32 pvr_hi; + int rc = -ENODEV; + + /* + * Behave here like powermac driver which checks machine compatibility + * to ease merging of two drivers in future. + */ + if (!of_machine_is_compatible("Momentum,Maple") && + !of_machine_is_compatible("Momentum,Apache")) + return 0; + + /* Get first CPU node */ + cpunode = of_cpu_device_node_get(0); + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); + goto bail_noprops; + } + + /* Check 970FX for now */ + /* we actually don't care on which CPU to access PVR */ + pvr_hi = PVR_VER(mfspr(SPRN_PVR)); + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + printk(KERN_ERR "cpufreq: Unsupported CPU version (%x)\n", + pvr_hi); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + /* + * On Maple this property is provided by PIBS in dual-processor config, + * not provided by PIBS in CPU0 config and also not provided by SLOF, + * so YMMV + */ + maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize); + if (!maple_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + maple_pmode_max = psize / sizeof(u32) - 1; + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + maple_cpu_freqs[0].frequency = max_freq; + maple_cpu_freqs[1].frequency = max_freq/2; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + msleep(10); + maple_pmode_cur = -1; + maple_scom_switch_freq(maple_scom_query_freq()); + + printk(KERN_INFO "Registering Maple CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + maple_cpu_freqs[1].frequency/1000, + maple_cpu_freqs[0].frequency/1000, + maple_cpu_freqs[maple_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&maple_cpufreq_driver); + + of_node_put(cpunode); + + return rc; + +bail_noprops: + of_node_put(cpunode); + + return rc; +} + +module_init(maple_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/omap-cpufreq.c b/kernel/drivers/cpufreq/omap-cpufreq.c new file mode 100644 index 000000000..e3866e0d5 --- /dev/null +++ b/kernel/drivers/cpufreq/omap-cpufreq.c @@ -0,0 +1,205 @@ +/* + * CPU frequency scaling for OMAP using OPP information + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King + * + * Copyright (C) 2007-2011 Texas Instruments, Inc. + * - OMAP3/4 support by Rajendra Nayak, Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pm_opp.h> +#include <linux/cpu.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#include <asm/smp_plat.h> +#include <asm/cpu.h> + +/* OPP tolerance in percentage */ +#define OPP_TOLERANCE 4 + +static struct cpufreq_frequency_table *freq_table; +static atomic_t freq_table_users = ATOMIC_INIT(0); +static struct device *mpu_dev; +static struct regulator *mpu_reg; + +static int omap_target(struct cpufreq_policy *policy, unsigned int index) +{ + int r, ret; + struct dev_pm_opp *opp; + unsigned long freq, volt = 0, volt_old = 0, tol = 0; + unsigned int old_freq, new_freq; + + old_freq = policy->cur; + new_freq = freq_table[index].frequency; + + freq = new_freq * 1000; + ret = clk_round_rate(policy->clk, freq); + if (IS_ERR_VALUE(ret)) { + dev_warn(mpu_dev, + "CPUfreq: Cannot find matching frequency for %lu\n", + freq); + return ret; + } + freq = ret; + + if (mpu_reg) { + rcu_read_lock(); + opp = dev_pm_opp_find_freq_ceil(mpu_dev, &freq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", + __func__, new_freq); + return -EINVAL; + } + volt = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + tol = volt * OPP_TOLERANCE / 100; + volt_old = regulator_get_voltage(mpu_reg); + } + + dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n", + old_freq / 1000, volt_old ? volt_old / 1000 : -1, + new_freq / 1000, volt ? volt / 1000 : -1); + + /* scaling up? scale voltage before frequency */ + if (mpu_reg && (new_freq > old_freq)) { + r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); + if (r < 0) { + dev_warn(mpu_dev, "%s: unable to scale voltage up.\n", + __func__); + return r; + } + } + + ret = clk_set_rate(policy->clk, new_freq * 1000); + + /* scaling down? scale voltage after frequency */ + if (mpu_reg && (new_freq < old_freq)) { + r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); + if (r < 0) { + dev_warn(mpu_dev, "%s: unable to scale voltage down.\n", + __func__); + clk_set_rate(policy->clk, old_freq * 1000); + return r; + } + } + + return ret; +} + +static inline void freq_table_free(void) +{ + if (atomic_dec_and_test(&freq_table_users)) + dev_pm_opp_free_cpufreq_table(mpu_dev, &freq_table); +} + +static int omap_cpu_init(struct cpufreq_policy *policy) +{ + int result; + + policy->clk = clk_get(NULL, "cpufreq_ck"); + if (IS_ERR(policy->clk)) + return PTR_ERR(policy->clk); + + if (!freq_table) { + result = dev_pm_opp_init_cpufreq_table(mpu_dev, &freq_table); + if (result) { + dev_err(mpu_dev, + "%s: cpu%d: failed creating freq table[%d]\n", + __func__, policy->cpu, result); + goto fail; + } + } + + atomic_inc_return(&freq_table_users); + + /* FIXME: what's the actual transition time? */ + result = cpufreq_generic_init(policy, freq_table, 300 * 1000); + if (!result) + return 0; + + freq_table_free(); +fail: + clk_put(policy->clk); + return result; +} + +static int omap_cpu_exit(struct cpufreq_policy *policy) +{ + freq_table_free(); + clk_put(policy->clk); + return 0; +} + +static struct cpufreq_driver omap_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = omap_target, + .get = cpufreq_generic_get, + .init = omap_cpu_init, + .exit = omap_cpu_exit, + .name = "omap", + .attr = cpufreq_generic_attr, +}; + +static int omap_cpufreq_probe(struct platform_device *pdev) +{ + mpu_dev = get_cpu_device(0); + if (!mpu_dev) { + pr_warning("%s: unable to get the mpu device\n", __func__); + return -EINVAL; + } + + mpu_reg = regulator_get(mpu_dev, "vcc"); + if (IS_ERR(mpu_reg)) { + pr_warning("%s: unable to get MPU regulator\n", __func__); + mpu_reg = NULL; + } else { + /* + * Ensure physical regulator is present. + * (e.g. could be dummy regulator.) + */ + if (regulator_get_voltage(mpu_reg) < 0) { + pr_warn("%s: physical regulator not present for MPU\n", + __func__); + regulator_put(mpu_reg); + mpu_reg = NULL; + } + } + + return cpufreq_register_driver(&omap_driver); +} + +static int omap_cpufreq_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&omap_driver); +} + +static struct platform_driver omap_cpufreq_platdrv = { + .driver = { + .name = "omap-cpufreq", + }, + .probe = omap_cpufreq_probe, + .remove = omap_cpufreq_remove, +}; +module_platform_driver(omap_cpufreq_platdrv); + +MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/p4-clockmod.c b/kernel/drivers/cpufreq/p4-clockmod.c new file mode 100644 index 000000000..529cfd921 --- /dev/null +++ b/kernel/drivers/cpufreq/p4-clockmod.c @@ -0,0 +1,286 @@ +/* + * Pentium 4/Xeon CPU on demand clock modulation/speed scaling + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * (C) 2002 Arjan van de Ven <arjanv@redhat.com> + * (C) 2002 Tora T. Engstad + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + * + * Date Errata Description + * 20020525 N44, O17 12.5% or 25% DC causes lockup + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/timex.h> + +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/timer.h> +#include <asm/cpu_device_id.h> + +#include "speedstep-lib.h" + +#define PFX "p4-clockmod: " + +/* + * Duty Cycle (3bits), note DC_DISABLE is not specified in + * intel docs i just use it to mean disable + */ +enum { + DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, + DC_64PT, DC_75PT, DC_88PT, DC_DISABLE +}; + +#define DC_ENTRIES 8 + + +static int has_N44_O17_errata[NR_CPUS]; +static unsigned int stock_freq; +static struct cpufreq_driver p4clockmod_driver; +static unsigned int cpufreq_p4_get(unsigned int cpu); + +static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) +{ + u32 l, h; + + if ((newstate > DC_DISABLE) || (newstate == DC_RESV)) + return -EINVAL; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); + + if (l & 0x01) + pr_debug("CPU#%d currently thermal throttled\n", cpu); + + if (has_N44_O17_errata[cpu] && + (newstate == DC_25PT || newstate == DC_DFLT)) + newstate = DC_38PT; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); + if (newstate == DC_DISABLE) { + pr_debug("CPU#%d disabling modulation\n", cpu); + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); + } else { + pr_debug("CPU#%d setting duty cycle to %d%%\n", + cpu, ((125 * newstate) / 10)); + /* bits 63 - 5 : reserved + * bit 4 : enable/disable + * bits 3-1 : duty cycle + * bit 0 : reserved + */ + l = (l & ~14); + l = l | (1<<4) | ((newstate & 0x7)<<1); + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); + } + + return 0; +} + + +static struct cpufreq_frequency_table p4clockmod_table[] = { + {0, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {0, DC_DFLT, 0}, + {0, DC_25PT, 0}, + {0, DC_38PT, 0}, + {0, DC_50PT, 0}, + {0, DC_64PT, 0}, + {0, DC_75PT, 0}, + {0, DC_88PT, 0}, + {0, DC_DISABLE, 0}, + {0, DC_RESV, CPUFREQ_TABLE_END}, +}; + + +static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index) +{ + int i; + + /* run on each logical CPU, + * see section 13.15.3 of IA32 Intel Architecture Software + * Developer's Manual, Volume 3 + */ + for_each_cpu(i, policy->cpus) + cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data); + + return 0; +} + + +static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x06) { + if (cpu_has(c, X86_FEATURE_EST)) + printk_once(KERN_WARNING PFX "Warning: EST-capable " + "CPU detected. The acpi-cpufreq module offers " + "voltage scaling in addition to frequency " + "scaling. You should use that instead of " + "p4-clockmod, if possible.\n"); + switch (c->x86_model) { + case 0x0E: /* Core */ + case 0x0F: /* Core Duo */ + case 0x16: /* Celeron Core */ + case 0x1C: /* Atom */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); + case 0x0D: /* Pentium M (Dothan) */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + /* fall through */ + case 0x09: /* Pentium M (Banias) */ + return speedstep_get_frequency(SPEEDSTEP_CPU_PM); + } + } + + if (c->x86 != 0xF) + return 0; + + /* on P-4s, the TSC runs with constant frequency independent whether + * throttling is active or not. */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { + printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " + "The speedstep-ich or acpi cpufreq modules offer " + "voltage scaling in addition of frequency scaling. " + "You should use either one instead of p4-clockmod, " + "if possible.\n"); + return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); + } + + return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); +} + + + +static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(policy->cpu); + int cpuid = 0; + unsigned int i; + +#ifdef CONFIG_SMP + cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); +#endif + + /* Errata workaround */ + cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask; + switch (cpuid) { + case 0x0f07: + case 0x0f0a: + case 0x0f11: + case 0x0f12: + has_N44_O17_errata[policy->cpu] = 1; + pr_debug("has errata -- disabling low frequencies\n"); + } + + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && + c->x86_model < 2) { + /* switch to maximum frequency and measure result */ + cpufreq_p4_setdc(policy->cpu, DC_DISABLE); + recalibrate_cpu_khz(); + } + /* get max frequency */ + stock_freq = cpufreq_p4_get_frequency(c); + if (!stock_freq) + return -EINVAL; + + /* table init */ + for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { + if ((i < 2) && (has_N44_O17_errata[policy->cpu])) + p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + p4clockmod_table[i].frequency = (stock_freq * i)/8; + } + + /* cpuinfo and default policy values */ + + /* the transition latency is set to be 1 higher than the maximum + * transition latency of the ondemand governor */ + policy->cpuinfo.transition_latency = 10000001; + + return cpufreq_table_validate_and_show(policy, &p4clockmod_table[0]); +} + + +static unsigned int cpufreq_p4_get(unsigned int cpu) +{ + u32 l, h; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); + + if (l & 0x10) { + l = l >> 1; + l &= 0x7; + } else + l = DC_DISABLE; + + if (l != DC_DISABLE) + return stock_freq * l / 8; + + return stock_freq; +} + +static struct cpufreq_driver p4clockmod_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cpufreq_p4_target, + .init = cpufreq_p4_cpu_init, + .get = cpufreq_p4_get, + .name = "p4-clockmod", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id cpufreq_p4_id[] = { + { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC }, + {} +}; + +/* + * Intentionally no MODULE_DEVICE_TABLE here: this driver should not + * be auto loaded. Please don't add one. + */ + +static int __init cpufreq_p4_init(void) +{ + int ret; + + /* + * THERM_CONTROL is architectural for IA32 now, so + * we can rely on the capability checks + */ + if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI)) + return -ENODEV; + + ret = cpufreq_register_driver(&p4clockmod_driver); + if (!ret) + printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " + "Modulation available\n"); + + return ret; +} + + +static void __exit cpufreq_p4_exit(void) +{ + cpufreq_unregister_driver(&p4clockmod_driver); +} + + +MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); +MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); +MODULE_LICENSE("GPL"); + +late_initcall(cpufreq_p4_init); +module_exit(cpufreq_p4_exit); diff --git a/kernel/drivers/cpufreq/pasemi-cpufreq.c b/kernel/drivers/cpufreq/pasemi-cpufreq.c new file mode 100644 index 000000000..35dd4d7ff --- /dev/null +++ b/kernel/drivers/cpufreq/pasemi-cpufreq.c @@ -0,0 +1,291 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Authors: Egor Martovetsky <egor@pasemi.com> + * Olof Johansson <olof@lixom.net> + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/cpufreq.h> +#include <linux/timer.h> +#include <linux/module.h> +#include <linux/of_address.h> + +#include <asm/hw_irq.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/smp.h> + +#define SDCASR_REG 0x0100 +#define SDCASR_REG_STRIDE 0x1000 +#define SDCPWR_CFGA0_REG 0x0100 +#define SDCPWR_PWST0_REG 0x0000 +#define SDCPWR_GIZTIME_REG 0x0440 + +/* SDCPWR_GIZTIME_REG fields */ +#define SDCPWR_GIZTIME_GR 0x80000000 +#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff + +/* Offset of ASR registers from SDC base */ +#define SDCASR_OFFSET 0x120000 + +static void __iomem *sdcpwr_mapbase; +static void __iomem *sdcasr_mapbase; + +/* Current astate, is used when waking up from power savings on + * one core, in case the other core has switched states during + * the idle time. + */ +static int current_astate; + +/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ +static struct cpufreq_frequency_table pas_freqs[] = { + {0, 0, 0}, + {0, 1, 0}, + {0, 2, 0}, + {0, 3, 0}, + {0, 4, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* + * hardware specific functions + */ + +static int get_astate_freq(int astate) +{ + u32 ret; + ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); + + return ret & 0x3f; +} + +static int get_cur_astate(int cpu) +{ + u32 ret; + + ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); + ret = (ret >> (cpu * 4)) & 0x7; + + return ret; +} + +static int get_gizmo_latency(void) +{ + u32 giztime, ret; + + giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); + + /* just provide the upper bound */ + if (giztime & SDCPWR_GIZTIME_GR) + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; + else + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; + + return ret; +} + +static void set_astate(int cpu, unsigned int astate) +{ + unsigned long flags; + + /* Return if called before init has run */ + if (unlikely(!sdcasr_mapbase)) + return; + + local_irq_save(flags); + + out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); + + local_irq_restore(flags); +} + +int check_astate(void) +{ + return get_cur_astate(hard_smp_processor_id()); +} + +void restore_astate(int cpu) +{ + set_astate(cpu, current_astate); +} + +/* + * cpufreq functions + */ + +static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos; + const u32 *max_freqp; + u32 max_freq; + int cur_astate; + struct resource res; + struct device_node *cpu, *dn; + int err = -ENODEV; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if (!cpu) + goto out; + + dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-sdc"); + if (!dn) + goto out; + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out; + sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); + if (!sdcasr_mapbase) { + err = -EINVAL; + goto out; + } + + dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gizmo"); + if (!dn) { + err = -ENODEV; + goto out_unmap_sdcasr; + } + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out_unmap_sdcasr; + sdcpwr_mapbase = ioremap(res.start, 0x1000); + if (!sdcpwr_mapbase) { + err = -EINVAL; + goto out_unmap_sdcasr; + } + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + if (!max_freqp) { + err = -EINVAL; + goto out_unmap_sdcpwr; + } + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + cpufreq_for_each_entry(pos, pas_freqs) { + pos->frequency = get_astate_freq(pos->driver_data) * 100000; + pr_debug("%d: %d\n", (int)(pos - pas_freqs), pos->frequency); + } + + cur_astate = get_cur_astate(policy->cpu); + pr_debug("current astate is at %d\n",cur_astate); + + policy->cur = pas_freqs[cur_astate].frequency; + ppc_proc_freq = policy->cur * 1000ul; + + return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency()); + +out_unmap_sdcpwr: + iounmap(sdcpwr_mapbase); + +out_unmap_sdcasr: + iounmap(sdcasr_mapbase); +out: + return err; +} + +static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + /* + * We don't support CPU hotplug. Don't unmap after the system + * has already made it to a running state. + */ + if (system_state != SYSTEM_BOOTING) + return 0; + + if (sdcasr_mapbase) + iounmap(sdcasr_mapbase); + if (sdcpwr_mapbase) + iounmap(sdcpwr_mapbase); + + return 0; +} + +static int pas_cpufreq_target(struct cpufreq_policy *policy, + unsigned int pas_astate_new) +{ + int i; + + pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", + policy->cpu, + pas_freqs[pas_astate_new].frequency, + pas_freqs[pas_astate_new].driver_data); + + current_astate = pas_astate_new; + + for_each_online_cpu(i) + set_astate(i, pas_astate_new); + + ppc_proc_freq = pas_freqs[pas_astate_new].frequency * 1000ul; + return 0; +} + +static struct cpufreq_driver pas_cpufreq_driver = { + .name = "pas-cpufreq", + .flags = CPUFREQ_CONST_LOOPS, + .init = pas_cpufreq_cpu_init, + .exit = pas_cpufreq_cpu_exit, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pas_cpufreq_target, + .attr = cpufreq_generic_attr, +}; + +/* + * module init and destoy + */ + +static int __init pas_cpufreq_init(void) +{ + if (!of_machine_is_compatible("PA6T-1682M") && + !of_machine_is_compatible("pasemi,pwrficient")) + return -ENODEV; + + return cpufreq_register_driver(&pas_cpufreq_driver); +} + +static void __exit pas_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pas_cpufreq_driver); +} + +module_init(pas_cpufreq_init); +module_exit(pas_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>"); diff --git a/kernel/drivers/cpufreq/pcc-cpufreq.c b/kernel/drivers/cpufreq/pcc-cpufreq.c new file mode 100644 index 000000000..2a0d58959 --- /dev/null +++ b/kernel/drivers/cpufreq/pcc-cpufreq.c @@ -0,0 +1,619 @@ +/* + * pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface + * + * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com> + * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. + * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON + * INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/compiler.h> +#include <linux/slab.h> + +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> + +#include <acpi/processor.h> + +#define PCC_VERSION "1.10.00" +#define POLL_LOOPS 300 + +#define CMD_COMPLETE 0x1 +#define CMD_GET_FREQ 0x0 +#define CMD_SET_FREQ 0x1 + +#define BUF_SZ 4 + +struct pcc_register_resource { + u8 descriptor; + u16 length; + u8 space_id; + u8 bit_width; + u8 bit_offset; + u8 access_size; + u64 address; +} __attribute__ ((packed)); + +struct pcc_memory_resource { + u8 descriptor; + u16 length; + u8 space_id; + u8 resource_usage; + u8 type_specific; + u64 granularity; + u64 minimum; + u64 maximum; + u64 translation_offset; + u64 address_length; +} __attribute__ ((packed)); + +static struct cpufreq_driver pcc_cpufreq_driver; + +struct pcc_header { + u32 signature; + u16 length; + u8 major; + u8 minor; + u32 features; + u16 command; + u16 status; + u32 latency; + u32 minimum_time; + u32 maximum_time; + u32 nominal; + u32 throttled_frequency; + u32 minimum_frequency; +}; + +static void __iomem *pcch_virt_addr; +static struct pcc_header __iomem *pcch_hdr; + +static DEFINE_SPINLOCK(pcc_lock); + +static struct acpi_generic_address doorbell; + +static u64 doorbell_preserve; +static u64 doorbell_write; + +static u8 OSC_UUID[16] = {0x9F, 0x2C, 0x9B, 0x63, 0x91, 0x70, 0x1f, 0x49, + 0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46}; + +struct pcc_cpu { + u32 input_offset; + u32 output_offset; +}; + +static struct pcc_cpu __percpu *pcc_cpu_info; + +static int pcc_cpufreq_verify(struct cpufreq_policy *policy) +{ + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +static inline void pcc_cmd(void) +{ + u64 doorbell_value; + int i; + + acpi_read(&doorbell_value, &doorbell); + acpi_write((doorbell_value & doorbell_preserve) | doorbell_write, + &doorbell); + + for (i = 0; i < POLL_LOOPS; i++) { + if (ioread16(&pcch_hdr->status) & CMD_COMPLETE) + break; + } +} + +static inline void pcc_clear_mapping(void) +{ + if (pcch_virt_addr) + iounmap(pcch_virt_addr); + pcch_virt_addr = NULL; +} + +static unsigned int pcc_get_freq(unsigned int cpu) +{ + struct pcc_cpu *pcc_cpu_data; + unsigned int curr_freq; + unsigned int freq_limit; + u16 status; + u32 input_buffer; + u32 output_buffer; + + spin_lock(&pcc_lock); + + pr_debug("get: get_freq for CPU %d\n", cpu); + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + input_buffer = 0x1; + iowrite32(input_buffer, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + iowrite16(CMD_GET_FREQ, &pcch_hdr->command); + + pcc_cmd(); + + output_buffer = + ioread32(pcch_virt_addr + pcc_cpu_data->output_offset); + + /* Clear the input buffer - we are done with the current command */ + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + + status = ioread16(&pcch_hdr->status); + if (status != CMD_COMPLETE) { + pr_debug("get: FAILED: for CPU %d, status is %d\n", + cpu, status); + goto cmd_incomplete; + } + iowrite16(0, &pcch_hdr->status); + curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff)) + / 100) * 1000); + + pr_debug("get: SUCCESS: (virtual) output_offset for cpu %d is " + "0x%p, contains a value of: 0x%x. Speed is: %d MHz\n", + cpu, (pcch_virt_addr + pcc_cpu_data->output_offset), + output_buffer, curr_freq); + + freq_limit = (output_buffer >> 8) & 0xff; + if (freq_limit != 0xff) { + pr_debug("get: frequency for cpu %d is being temporarily" + " capped at %d\n", cpu, curr_freq); + } + + spin_unlock(&pcc_lock); + return curr_freq; + +cmd_incomplete: + iowrite16(0, &pcch_hdr->status); + spin_unlock(&pcc_lock); + return 0; +} + +static int pcc_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct pcc_cpu *pcc_cpu_data; + struct cpufreq_freqs freqs; + u16 status; + u32 input_buffer; + int cpu; + + cpu = policy->cpu; + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + pr_debug("target: CPU %d should go to target freq: %d " + "(virtual) input_offset is 0x%p\n", + cpu, target_freq, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + + freqs.old = policy->cur; + freqs.new = target_freq; + cpufreq_freq_transition_begin(policy, &freqs); + spin_lock(&pcc_lock); + + input_buffer = 0x1 | (((target_freq * 100) + / (ioread32(&pcch_hdr->nominal) * 1000)) << 8); + iowrite32(input_buffer, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + iowrite16(CMD_SET_FREQ, &pcch_hdr->command); + + pcc_cmd(); + + /* Clear the input buffer - we are done with the current command */ + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + + status = ioread16(&pcch_hdr->status); + iowrite16(0, &pcch_hdr->status); + + cpufreq_freq_transition_end(policy, &freqs, status != CMD_COMPLETE); + spin_unlock(&pcc_lock); + + if (status != CMD_COMPLETE) { + pr_debug("target: FAILED for cpu %d, with status: 0x%x\n", + cpu, status); + return -EINVAL; + } + + pr_debug("target: was SUCCESSFUL for cpu %d\n", cpu); + + return 0; +} + +static int pcc_get_offset(int cpu) +{ + acpi_status status; + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *pccp, *offset; + struct pcc_cpu *pcc_cpu_data; + struct acpi_processor *pr; + int ret = 0; + + pr = per_cpu(processors, cpu); + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + if (!pr) + return -ENODEV; + + status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + pccp = buffer.pointer; + if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) { + ret = -ENODEV; + goto out_free; + }; + + offset = &(pccp->package.elements[0]); + if (!offset || offset->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto out_free; + } + + pcc_cpu_data->input_offset = offset->integer.value; + + offset = &(pccp->package.elements[1]); + if (!offset || offset->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto out_free; + } + + pcc_cpu_data->output_offset = offset->integer.value; + + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ); + + pr_debug("pcc_get_offset: for CPU %d: pcc_cpu_data " + "input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n", + cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset); +out_free: + kfree(buffer.pointer); + return ret; +} + +static int __init pcc_cpufreq_do_osc(acpi_handle *handle) +{ + acpi_status status; + struct acpi_object_list input; + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object in_params[4]; + union acpi_object *out_obj; + u32 capabilities[2]; + u32 errors; + u32 supported; + int ret = 0; + + input.count = 4; + input.pointer = in_params; + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = 16; + in_params[0].buffer.pointer = OSC_UUID; + in_params[1].type = ACPI_TYPE_INTEGER; + in_params[1].integer.value = 1; + in_params[2].type = ACPI_TYPE_INTEGER; + in_params[2].integer.value = 2; + in_params[3].type = ACPI_TYPE_BUFFER; + in_params[3].buffer.length = 8; + in_params[3].buffer.pointer = (u8 *)&capabilities; + + capabilities[0] = OSC_QUERY_ENABLE; + capabilities[1] = 0x1; + + status = acpi_evaluate_object(*handle, "_OSC", &input, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (!output.length) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + ret = -ENODEV; + goto out_free; + } + + supported = *((u32 *)(out_obj->buffer.pointer + 4)); + if (!(supported & 0x1)) { + ret = -ENODEV; + goto out_free; + } + + kfree(output.pointer); + capabilities[0] = 0x0; + capabilities[1] = 0x1; + + status = acpi_evaluate_object(*handle, "_OSC", &input, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (!output.length) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + ret = -ENODEV; + goto out_free; + } + + supported = *((u32 *)(out_obj->buffer.pointer + 4)); + if (!(supported & 0x1)) { + ret = -ENODEV; + goto out_free; + } + +out_free: + kfree(output.pointer); + return ret; +} + +static int __init pcc_cpufreq_probe(void) +{ + acpi_status status; + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; + struct pcc_memory_resource *mem_resource; + struct pcc_register_resource *reg_resource; + union acpi_object *out_obj, *member; + acpi_handle handle, osc_handle; + int ret = 0; + + status = acpi_get_handle(NULL, "\\_SB", &handle); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (!acpi_has_method(handle, "PCCH")) + return -ENODEV; + + status = acpi_get_handle(handle, "_OSC", &osc_handle); + if (ACPI_SUCCESS(status)) { + ret = pcc_cpufreq_do_osc(&osc_handle); + if (ret) + pr_debug("probe: _OSC evaluation did not succeed\n"); + /* Firmware's use of _OSC is optional */ + ret = 0; + } + + status = acpi_evaluate_object(handle, "PCCH", NULL, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_PACKAGE) { + ret = -ENODEV; + goto out_free; + } + + member = &out_obj->package.elements[0]; + if (member->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + mem_resource = (struct pcc_memory_resource *)member->buffer.pointer; + + pr_debug("probe: mem_resource descriptor: 0x%x," + " length: %d, space_id: %d, resource_usage: %d," + " type_specific: %d, granularity: 0x%llx," + " minimum: 0x%llx, maximum: 0x%llx," + " translation_offset: 0x%llx, address_length: 0x%llx\n", + mem_resource->descriptor, mem_resource->length, + mem_resource->space_id, mem_resource->resource_usage, + mem_resource->type_specific, mem_resource->granularity, + mem_resource->minimum, mem_resource->maximum, + mem_resource->translation_offset, + mem_resource->address_length); + + if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) { + ret = -ENODEV; + goto out_free; + } + + pcch_virt_addr = ioremap_nocache(mem_resource->minimum, + mem_resource->address_length); + if (pcch_virt_addr == NULL) { + pr_debug("probe: could not map shared mem region\n"); + ret = -ENOMEM; + goto out_free; + } + pcch_hdr = pcch_virt_addr; + + pr_debug("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr); + pr_debug("probe: PCCH header is at physical address: 0x%llx," + " signature: 0x%x, length: %d bytes, major: %d, minor: %d," + " supported features: 0x%x, command field: 0x%x," + " status field: 0x%x, nominal latency: %d us\n", + mem_resource->minimum, ioread32(&pcch_hdr->signature), + ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major), + ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features), + ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status), + ioread32(&pcch_hdr->latency)); + + pr_debug("probe: min time between commands: %d us," + " max time between commands: %d us," + " nominal CPU frequency: %d MHz," + " minimum CPU frequency: %d MHz," + " minimum CPU frequency without throttling: %d MHz\n", + ioread32(&pcch_hdr->minimum_time), + ioread32(&pcch_hdr->maximum_time), + ioread32(&pcch_hdr->nominal), + ioread32(&pcch_hdr->throttled_frequency), + ioread32(&pcch_hdr->minimum_frequency)); + + member = &out_obj->package.elements[1]; + if (member->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto pcch_free; + } + + reg_resource = (struct pcc_register_resource *)member->buffer.pointer; + + doorbell.space_id = reg_resource->space_id; + doorbell.bit_width = reg_resource->bit_width; + doorbell.bit_offset = reg_resource->bit_offset; + doorbell.access_width = 64; + doorbell.address = reg_resource->address; + + pr_debug("probe: doorbell: space_id is %d, bit_width is %d, " + "bit_offset is %d, access_width is %d, address is 0x%llx\n", + doorbell.space_id, doorbell.bit_width, doorbell.bit_offset, + doorbell.access_width, reg_resource->address); + + member = &out_obj->package.elements[2]; + if (member->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto pcch_free; + } + + doorbell_preserve = member->integer.value; + + member = &out_obj->package.elements[3]; + if (member->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto pcch_free; + } + + doorbell_write = member->integer.value; + + pr_debug("probe: doorbell_preserve: 0x%llx," + " doorbell_write: 0x%llx\n", + doorbell_preserve, doorbell_write); + + pcc_cpu_info = alloc_percpu(struct pcc_cpu); + if (!pcc_cpu_info) { + ret = -ENOMEM; + goto pcch_free; + } + + printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency" + " limits: %d MHz, %d MHz\n", PCC_VERSION, + ioread32(&pcch_hdr->minimum_frequency), + ioread32(&pcch_hdr->nominal)); + kfree(output.pointer); + return ret; +pcch_free: + pcc_clear_mapping(); +out_free: + kfree(output.pointer); + return ret; +} + +static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + unsigned int result = 0; + + if (!pcch_virt_addr) { + result = -1; + goto out; + } + + result = pcc_get_offset(cpu); + if (result) { + pr_debug("init: PCCP evaluation failed\n"); + goto out; + } + + policy->max = policy->cpuinfo.max_freq = + ioread32(&pcch_hdr->nominal) * 1000; + policy->min = policy->cpuinfo.min_freq = + ioread32(&pcch_hdr->minimum_frequency) * 1000; + + pr_debug("init: policy->max is %d, policy->min is %d\n", + policy->max, policy->min); +out: + return result; +} + +static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct cpufreq_driver pcc_cpufreq_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .get = pcc_get_freq, + .verify = pcc_cpufreq_verify, + .target = pcc_cpufreq_target, + .init = pcc_cpufreq_cpu_init, + .exit = pcc_cpufreq_cpu_exit, + .name = "pcc-cpufreq", +}; + +static int __init pcc_cpufreq_init(void) +{ + int ret; + + if (acpi_disabled) + return 0; + + ret = pcc_cpufreq_probe(); + if (ret) { + pr_debug("pcc_cpufreq_init: PCCH evaluation failed\n"); + return ret; + } + + ret = cpufreq_register_driver(&pcc_cpufreq_driver); + + return ret; +} + +static void __exit pcc_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pcc_cpufreq_driver); + + pcc_clear_mapping(); + + free_percpu(pcc_cpu_info); +} + +static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, }, + {ACPI_PROCESSOR_DEVICE_HID, }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, processor_device_ids); + +MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar"); +MODULE_VERSION(PCC_VERSION); +MODULE_DESCRIPTION("Processor Clocking Control interface driver"); +MODULE_LICENSE("GPL"); + +late_initcall(pcc_cpufreq_init); +module_exit(pcc_cpufreq_exit); diff --git a/kernel/drivers/cpufreq/pmac32-cpufreq.c b/kernel/drivers/cpufreq/pmac32-cpufreq.c new file mode 100644 index 000000000..1f49d97a7 --- /dev/null +++ b/kernel/drivers/cpufreq/pmac32-cpufreq.c @@ -0,0 +1,686 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/hardirq.h> +#include <linux/of_device.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/pmac_feature.h> +#include <asm/mmu_context.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/mpic.h> +#include <asm/keylargo.h> +#include <asm/switch_to.h> + +/* WARNING !!! This will cause calibrate_delay() to be called, + * but this is an __init function ! So you MUST go edit + * init/main.c to make it non-init before enabling DEBUG_FREQ + */ +#undef DEBUG_FREQ + +extern void low_choose_7447a_dfs(int dfs); +extern void low_choose_750fx_pll(int pll); +extern void low_sleep_handler(void); + +/* + * Currently, PowerMac cpufreq supports only high & low frequencies + * that are set by the firmware + */ +static unsigned int low_freq; +static unsigned int hi_freq; +static unsigned int cur_freq; +static unsigned int sleep_freq; +static unsigned long transition_latency; + +/* + * Different models uses different mechanisms to switch the frequency + */ +static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); + +/* + * Some definitions used by the various speedprocs + */ +static u32 voltage_gpio; +static u32 frequency_gpio; +static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; +static int is_pmu_based; + +/* There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table pmac_cpu_freqs[] = { + {0, CPUFREQ_HIGH, 0}, + {0, CPUFREQ_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + +#ifdef DEBUG_FREQ +static inline void debug_calc_bogomips(void) +{ + /* This will cause a recalc of bogomips and display the + * result. We backup/restore the value to avoid affecting the + * core cpufreq framework's own calculation. + */ + unsigned long save_lpj = loops_per_jiffy; + calibrate_delay(); + loops_per_jiffy = save_lpj; +} +#endif /* DEBUG_FREQ */ + +/* Switch CPU speed under 750FX CPU control + */ +static int cpu_750fx_cpu_speed(int low_speed) +{ + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } +#ifdef CONFIG_6xx + low_choose_750fx_pll(low_speed); +#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } + + return 0; +} + +static unsigned int cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + +/* Switch CPU speed using DFS */ +static int dfs_set_cpu_speed(int low_speed) +{ + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(1); + } + + /* set frequency */ +#ifdef CONFIG_6xx + low_choose_7447a_dfs(low_speed); +#endif + udelay(100); + + if (low_speed == 1) { + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(1); + } + + return 0; +} + +static unsigned int dfs_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_DFS) + return low_freq; + else + return hi_freq; +} + + +/* Switch CPU speed using slewing GPIOs + */ +static int gpios_set_cpu_speed(int low_speed) +{ + int gpio, timeout = 0; + + /* If ramping up, set voltage first */ + if (low_speed == 0) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + + /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, + low_speed ? 0x04 : 0x05); + udelay(200); + do { + if (++timeout > 100) + break; + local_delay(1); + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); + } while((gpio & 0x02) == 0); + skip: + /* If ramping down, set voltage last */ + if (low_speed == 1) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + return 0; +} + +/* Switch CPU speed under PMU control + */ +static int pmu_set_cpu_speed(int low_speed) +{ + struct adb_request req; + unsigned long save_l2cr; + unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; + + preempt_disable(); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); +#endif + pmu_suspend(); + + /* Disable all interrupt sources on openpic */ + pic_prio = mpic_cpu_get_priority(); + mpic_cpu_set_priority(0xf); + + /* Make sure the decrementer won't interrupt us */ + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + /* Make sure any pending DEC interrupt occurring while we did + * the above didn't re-enable the DEC */ + mb(); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + + /* We can now disable MSR_EE */ + local_irq_save(flags); + + /* Giveup the FPU & vec */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + /* Save & disable L2 and L3 caches */ + save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ + save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ + + /* Send the new speed command. My assumption is that this command + * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep + */ + pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); + while (!req.complete) + pmu_poll(); + + /* Prepare the northbridge for the speed transition */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); + + /* Call low level code to backup CPU state and recover from + * hardware reset + */ + low_sleep_handler(); + + /* Restore the northbridge */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); + + /* Restore L2 cache */ + if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) + _set_L2CR(save_l2cr); + /* Restore L3 cache */ + if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) + _set_L3CR(save_l3cr); + + /* Restore userland MMU context */ + switch_mmu_context(NULL, current->active_mm); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); +#endif + + /* Restore low level PMU operations */ + pmu_unlock(); + + /* + * Restore decrementer; we'll take a decrementer interrupt + * as soon as interrupts are re-enabled and the generic + * clockevents code will reprogram it with the right value. + */ + set_dec(1); + + /* Restore interrupts */ + mpic_cpu_set_priority(pic_prio); + + /* Let interrupts flow again ... */ + local_irq_restore(flags); + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + pmu_resume(); + + preempt_enable(); + + return 0; +} + +static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode) +{ + unsigned long l3cr; + static unsigned long prev_l3cr; + + if (speed_mode == CPUFREQ_LOW && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + return 0; +} + +static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + +static int pmac_cpufreq_target( struct cpufreq_policy *policy, + unsigned int index) +{ + int rc; + + rc = do_set_cpu_speed(policy, index); + + ppc_proc_freq = cur_freq * 1000ul; + return rc; +} + +static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency); +} + +static u32 read_gpio(struct device_node *np) +{ + const u32 *reg = of_get_property(np, "reg", NULL); + u32 offset; + + if (reg == NULL) + return 0; + /* That works for all keylargos but shall be fixed properly + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. + */ + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(policy, CPUFREQ_HIGH); + return 0; +} + +static int pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(policy, sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH); + + ppc_proc_freq = cur_freq * 1000ul; + + no_schedule = 0; + return 0; +} + +static struct cpufreq_driver pmac_cpufreq_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, + .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_PM_NO_WARN, + .attr = cpufreq_generic_attr, + .name = "powermac", +}; + + +static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np = of_find_node_by_name(NULL, + "voltage-gpio"); + struct device_node *freq_gpio_np = of_find_node_by_name(NULL, + "frequency-gpio"); + struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, + "slewing-done"); + const u32 *value; + + /* + * Check to see if it's GPIO driven or PMU only + * + * The way we extract the GPIO address is slightly hackish, but it + * works well enough for now. We need to abstract the whole GPIO + * stuff sooner or later anyway + */ + + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (freq_gpio_np) + frequency_gpio = read_gpio(freq_gpio_np); + if (slew_done_gpio_np) + slew_done_gpio = read_gpio(slew_done_gpio_np); + + /* If we use the frequency GPIOs, calculate the min/max speeds based + * on the bus frequencies + */ + if (frequency_gpio && slew_done_gpio) { + int lenp, rc; + const u32 *freqs, *ratio; + + freqs = of_get_property(cpunode, "bus-frequencies", &lenp); + lenp /= sizeof(u32); + if (freqs == NULL || lenp != 2) { + printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + return 1; + } + ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", + NULL); + if (ratio == NULL) { + printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + return 1; + } + + /* Get the min/max bus frequencies */ + low_freq = min(freqs[0], freqs[1]); + hi_freq = max(freqs[0], freqs[1]); + + /* Grrrr.. It _seems_ that the device-tree is lying on the low bus + * frequency, it claims it to be around 84Mhz on some models while + * it appears to be approx. 101Mhz on all. Let's hack around here... + * fortunately, we don't need to be too precise + */ + if (low_freq < 98000000) + low_freq = 101000000; + + /* Convert those to CPU core clocks */ + low_freq = (low_freq * (*ratio)) / 2000; + hi_freq = (hi_freq * (*ratio)) / 2000; + + /* Now we get the frequencies, we read the GPIO to see what is out current + * speed + */ + rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + cur_freq = (rc & 0x01) ? hi_freq : low_freq; + + set_speed_proc = gpios_set_cpu_speed; + return 1; + } + + /* If we use the PMU, look for the min & max frequencies in the + * device-tree + */ + value = of_get_property(cpunode, "min-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree + * here */ + if (low_freq < 100000) + low_freq *= 10; + + value = of_get_property(cpunode, "max-clock-frequency", NULL); + if (!value) + return 1; + hi_freq = (*value) / 1000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + + return 0; +} + +static int pmac_cpufreq_init_7447A(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (!voltage_gpio){ + printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + return 1; + } + + /* OF only reports the high frequency */ + hi_freq = cur_freq; + low_freq = cur_freq/2; + + /* Read actual frequency from CPU */ + cur_freq = dfs_get_cpu_speed(); + set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr; + const u32 *value; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = of_get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); + + return 0; +} + +/* Currently, we support the following machines: + * + * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) + * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) + * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) + * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) + * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) + * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) + * - Recent MacRISC3 laptops + * - All new machines with 7447A CPUs + */ +static int __init pmac_cpufreq_setup(void) +{ + struct device_node *cpunode; + const u32 *value; + + if (strstr(boot_command_line, "nocpufreq")) + return 0; + + /* Get first CPU node */ + cpunode = of_cpu_device_node_get(0); + if (!cpunode) + goto out; + + /* Get current cpu clock freq */ + value = of_get_property(cpunode, "clock-frequency", NULL); + if (!value) + goto out; + cur_freq = (*value) / 1000; + transition_latency = CPUFREQ_ETERNAL; + + /* Check for 7447A based MacRISC3 */ + if (of_machine_is_compatible("MacRISC3") && + of_get_property(cpunode, "dynamic-power-step", NULL) && + PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { + pmac_cpufreq_init_7447A(cpunode); + transition_latency = 8000000; + /* Check for other MacRISC3 machines */ + } else if (of_machine_is_compatible("PowerBook3,4") || + of_machine_is_compatible("PowerBook3,5") || + of_machine_is_compatible("MacRISC3")) { + pmac_cpufreq_init_MacRISC3(cpunode); + /* Else check for iBook2 500/600 */ + } else if (of_machine_is_compatible("PowerBook4,1")) { + hi_freq = cur_freq; + low_freq = 400000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 550 */ + else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { + hi_freq = cur_freq; + low_freq = 500000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 400 & 500 */ + else if (of_machine_is_compatible("PowerBook3,2")) { + /* We only know about the 400 MHz and the 500Mhz model + * they both have 300 MHz as low frequency + */ + if (cur_freq < 350000 || cur_freq > 550000) + goto out; + hi_freq = cur_freq; + low_freq = 300000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for 750FX */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); +out: + of_node_put(cpunode); + if (set_speed_proc == NULL) + return -ENODEV; + + pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; + pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; + + printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); + + return cpufreq_register_driver(&pmac_cpufreq_driver); +} + +module_init(pmac_cpufreq_setup); + diff --git a/kernel/drivers/cpufreq/pmac64-cpufreq.c b/kernel/drivers/cpufreq/pmac64-cpufreq.c new file mode 100644 index 000000000..4ff868787 --- /dev/null +++ b/kernel/drivers/cpufreq/pmac64-cpufreq.c @@ -0,0 +1,676 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#undef DEBUG + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/smu.h> +#include <asm/pmac_pfunc.h> + +#define DBG(fmt...) pr_debug(fmt) + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {0, CPUFREQ_HIGH, 0}, + {0, CPUFREQ_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retrieved from the device-tree + */ +static int g5_pmode_cur; + +static void (*g5_switch_volt)(int speed_mode); +static int (*g5_switch_freq)(int speed_mode); +static int (*g5_query_freq)(void); + +static unsigned long transition_latency; + +#ifdef CONFIG_PMAC_SMU + +static const u32 *g5_pmode_data; +static int g5_pmode_max; + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* + * SMU based voltage switching for Neo2 platforms + */ + +static void g5_smu_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION_ONSTACK(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +/* + * Platform function based voltage/vdnap switching for Neo2 + */ + +static struct pmf_function *pfunc_set_vdnap0; +static struct pmf_function *pfunc_vdnap0_complete; + +static void g5_vdnap_switch_volt(int speed_mode) +{ + struct pmf_args args; + u32 slew, done = 0; + unsigned long timeout; + + slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; + args.count = 1; + args.u[0].p = &slew; + + pmf_call_one(pfunc_set_vdnap0, &args); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_vdnap0_complete, &args); + if (done) + break; + usleep_range(1000, 1000); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); +} + + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int g5_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + local_irq_save(flags); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + local_irq_restore(flags); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_scom_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +#endif /* CONFIG_PMAC_SMU */ + +/* + * Platform function based voltage switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu0_volt_high; +static struct pmf_function *pfunc_cpu0_volt_low; +static struct pmf_function *pfunc_cpu1_volt_high; +static struct pmf_function *pfunc_cpu1_volt_low; + +static void g5_pfunc_switch_volt(int speed_mode) +{ + if (speed_mode == CPUFREQ_HIGH) { + if (pfunc_cpu0_volt_high) + pmf_call_one(pfunc_cpu0_volt_high, NULL); + if (pfunc_cpu1_volt_high) + pmf_call_one(pfunc_cpu1_volt_high, NULL); + } else { + if (pfunc_cpu0_volt_low) + pmf_call_one(pfunc_cpu0_volt_low, NULL); + if (pfunc_cpu1_volt_low) + pmf_call_one(pfunc_cpu1_volt_low, NULL); + } + usleep_range(10000, 10000); /* should be faster , to fix */ +} + +/* + * Platform function based frequency switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu_setfreq_high; +static struct pmf_function *pfunc_cpu_setfreq_low; +static struct pmf_function *pfunc_cpu_getfreq; +static struct pmf_function *pfunc_slewing_done; + +static int g5_pfunc_switch_freq(int speed_mode) +{ + struct pmf_args args; + u32 done = 0; + unsigned long timeout; + int rc; + + DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Do it */ + if (speed_mode == CPUFREQ_HIGH) + rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); + else + rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + if (rc) + printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_slewing_done, &args); + if (done) + break; + usleep_range(500, 500); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_pfunc_query_freq(void) +{ + struct pmf_args args; + u32 val = 0; + + args.count = 1; + args.u[0].p = &val; + pmf_call_one(pfunc_cpu_getfreq, &args); + return val ? CPUFREQ_HIGH : CPUFREQ_LOW; +} + + +/* + * Common interface to the cpufreq core + */ + +static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) +{ + return g5_switch_freq(index); +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, g5_cpu_freqs, transition_latency); +} + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = cpufreq_generic_attr, +}; + + +#ifdef CONFIG_PMAC_SMU + +static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) +{ + unsigned int psize, ssize; + unsigned long max_freq; + char *freq_method, *volt_method; + const u32 *valp; + u32 pvr_hi; + int use_volts_vdnap = 0; + int use_volts_smu = 0; + int rc = -ENODEV; + + /* Check supported platforms */ + if (of_machine_is_compatible("PowerMac8,1") || + of_machine_is_compatible("PowerMac8,2") || + of_machine_is_compatible("PowerMac9,1") || + of_machine_is_compatible("PowerMac12,1")) + use_volts_smu = 1; + else if (of_machine_is_compatible("PowerMac11,2")) + use_volts_vdnap = 1; + else + return -ENODEV; + + /* Check 970FX for now */ + valp = of_get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + pvr_hi = (*valp) >> 16; + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + if (use_volts_smu) { + const struct smu_sdbp_header *shdr; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - sizeof(*shdr); + g5_fvt_count = ssize / sizeof(*g5_fvt_table); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + g5_switch_volt = g5_smu_switch_volt; + volt_method = "SMU"; + } else if (use_volts_vdnap) { + struct device_node *root; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_ERR "cpufreq: Can't find root of " + "device tree\n"); + goto bail_noprops; + } + pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); + pfunc_vdnap0_complete = + pmf_find_function(root, "slewing-done"); + if (pfunc_set_vdnap0 == NULL || + pfunc_vdnap0_complete == NULL) { + printk(KERN_ERR "cpufreq: Can't find required " + "platform function\n"); + goto bail_noprops; + } + + g5_switch_volt = g5_vdnap_switch_volt; + volt_method = "GPIO"; + } else { + g5_switch_volt = g5_dummy_switch_volt; + volt_method = "none"; + } + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Set callbacks */ + transition_latency = 12000; + g5_switch_freq = g5_scom_switch_freq; + g5_query_freq = g5_scom_query_freq; + freq_method = "SCOM"; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +#endif /* CONFIG_PMAC_SMU */ + + +static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) +{ + struct device_node *cpuid = NULL, *hwclock = NULL; + const u8 *eeprom = NULL; + const u32 *valp; + u64 max_freq, min_freq, ih, il; + int has_volt = 1, rc = 0; + + DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" + " RackMac3,1...\n"); + + /* Lookup the cpuid eeprom node */ + cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); + if (cpuid != NULL) + eeprom = of_get_property(cpuid, "cpuid", NULL); + if (eeprom == NULL) { + printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); + rc = -ENODEV; + goto bail; + } + + /* Lookup the i2c hwclock */ + for_each_node_by_name(hwclock, "i2c-hwclock") { + const char *loc = of_get_property(hwclock, + "hwctrl-location", NULL); + if (loc == NULL) + continue; + if (strcmp(loc, "CPU CLOCK")) + continue; + if (!of_get_property(hwclock, "platform-get-frequency", NULL)) + continue; + break; + } + if (hwclock == NULL) { + printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); + rc = -ENODEV; + goto bail; + } + + DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); + + /* Now get all the platform functions */ + pfunc_cpu_getfreq = + pmf_find_function(hwclock, "get-frequency"); + pfunc_cpu_setfreq_high = + pmf_find_function(hwclock, "set-frequency-high"); + pfunc_cpu_setfreq_low = + pmf_find_function(hwclock, "set-frequency-low"); + pfunc_slewing_done = + pmf_find_function(hwclock, "slewing-done"); + pfunc_cpu0_volt_high = + pmf_find_function(hwclock, "set-voltage-high-0"); + pfunc_cpu0_volt_low = + pmf_find_function(hwclock, "set-voltage-low-0"); + pfunc_cpu1_volt_high = + pmf_find_function(hwclock, "set-voltage-high-1"); + pfunc_cpu1_volt_low = + pmf_find_function(hwclock, "set-voltage-low-1"); + + /* Check we have minimum requirements */ + if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || + pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { + printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); + rc = -ENODEV; + goto bail; + } + + /* Check that we have complete sets */ + if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; + has_volt = 0; + } + if (!has_volt || + pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; + } + + /* Note: The device tree also contains a "platform-set-values" + * function for which I haven't quite figured out the usage. It + * might have to be called on init and/or wakeup, I'm not too sure + * but things seem to work fine without it so far ... + */ + + /* Get max frequency from device-tree */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) { + printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); + rc = -ENODEV; + goto bail; + } + + max_freq = (*valp)/1000; + + /* Now calculate reduced frequency by using the cpuid input freq + * ratio. This requires 64 bits math unless we are willing to lose + * some precision + */ + ih = *((u32 *)(eeprom + 0x10)); + il = *((u32 *)(eeprom + 0x20)); + + /* Check for machines with no useful settings */ + if (il == ih) { + printk(KERN_WARNING "cpufreq: No low frequency mode available" + " on this model !\n"); + rc = -ENODEV; + goto bail; + } + + min_freq = 0; + if (ih != 0 && il != 0) + min_freq = (max_freq * il) / ih; + + /* Sanity check */ + if (min_freq >= max_freq || min_freq < 1000) { + printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); + rc = -ENXIO; + goto bail; + } + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = min_freq; + + /* Based on a measurement on Xserve G5, rounded up. */ + transition_latency = 10 * NSEC_PER_MSEC; + + /* Set callbacks */ + g5_switch_volt = g5_pfunc_switch_volt; + g5_switch_freq = g5_pfunc_switch_freq; + g5_query_freq = g5_pfunc_query_freq; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: i2c/pfunc, " + "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + bail: + if (rc != 0) { + pmf_put_function(pfunc_cpu_getfreq); + pmf_put_function(pfunc_cpu_setfreq_high); + pmf_put_function(pfunc_cpu_setfreq_low); + pmf_put_function(pfunc_slewing_done); + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + } + of_node_put(hwclock); + of_node_put(cpuid); + of_node_put(cpunode); + + return rc; +} + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpunode; + int rc = 0; + + /* Get first CPU node */ + cpunode = of_cpu_device_node_get(0); + if (cpunode == NULL) { + pr_err("cpufreq: Can't find any CPU node\n"); + return -ENODEV; + } + + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) + rc = g5_pm72_cpufreq_init(cpunode); +#ifdef CONFIG_PMAC_SMU + else + rc = g5_neo2_cpufreq_init(cpunode); +#endif /* CONFIG_PMAC_SMU */ + + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/powernow-k6.c b/kernel/drivers/cpufreq/powernow-k6.c new file mode 100644 index 000000000..e6f24b281 --- /dev/null +++ b/kernel/drivers/cpufreq/powernow-k6.c @@ -0,0 +1,309 @@ +/* + * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) + * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, + * Dominik Brodowski. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/ioport.h> +#include <linux/timex.h> +#include <linux/io.h> + +#include <asm/cpu_device_id.h> +#include <asm/msr.h> + +#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long + as it is unused */ + +#define PFX "powernow-k6: " +static unsigned int busfreq; /* FSB, in 10 kHz */ +static unsigned int max_multiplier; + +static unsigned int param_busfreq = 0; +static unsigned int param_max_multiplier = 0; + +module_param_named(max_multiplier, param_max_multiplier, uint, S_IRUGO); +MODULE_PARM_DESC(max_multiplier, "Maximum multiplier (allowed values: 20 30 35 40 45 50 55 60)"); + +module_param_named(bus_frequency, param_busfreq, uint, S_IRUGO); +MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz"); + +/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */ +static struct cpufreq_frequency_table clock_ratio[] = { + {0, 60, /* 110 -> 6.0x */ 0}, + {0, 55, /* 011 -> 5.5x */ 0}, + {0, 50, /* 001 -> 5.0x */ 0}, + {0, 45, /* 000 -> 4.5x */ 0}, + {0, 40, /* 010 -> 4.0x */ 0}, + {0, 35, /* 111 -> 3.5x */ 0}, + {0, 30, /* 101 -> 3.0x */ 0}, + {0, 20, /* 100 -> 2.0x */ 0}, + {0, 0, CPUFREQ_TABLE_END} +}; + +static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 }; +static const u8 register_to_index[8] = { 3, 2, 4, 1, 7, 6, 0, 5 }; + +static const struct { + unsigned freq; + unsigned mult; +} usual_frequency_table[] = { + { 350000, 35 }, // 100 * 3.5 + { 400000, 40 }, // 100 * 4 + { 450000, 45 }, // 100 * 4.5 + { 475000, 50 }, // 95 * 5 + { 500000, 50 }, // 100 * 5 + { 506250, 45 }, // 112.5 * 4.5 + { 533500, 55 }, // 97 * 5.5 + { 550000, 55 }, // 100 * 5.5 + { 562500, 50 }, // 112.5 * 5 + { 570000, 60 }, // 95 * 6 + { 600000, 60 }, // 100 * 6 + { 618750, 55 }, // 112.5 * 5.5 + { 660000, 55 }, // 120 * 5.5 + { 675000, 60 }, // 112.5 * 6 + { 720000, 60 }, // 120 * 6 +}; + +#define FREQ_RANGE 3000 + +/** + * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier + * + * Returns the current setting of the frequency multiplier. Core clock + * speed is frequency of the Front-Side Bus multiplied with this value. + */ +static int powernow_k6_get_cpu_multiplier(void) +{ + unsigned long invalue = 0; + u32 msrval; + + local_irq_disable(); + + msrval = POWERNOW_IOPORT + 0x1; + wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ + invalue = inl(POWERNOW_IOPORT + 0x8); + msrval = POWERNOW_IOPORT + 0x0; + wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ + + local_irq_enable(); + + return clock_ratio[register_to_index[(invalue >> 5)&7]].driver_data; +} + +static void powernow_k6_set_cpu_multiplier(unsigned int best_i) +{ + unsigned long outvalue, invalue; + unsigned long msrval; + unsigned long cr0; + + /* we now need to transform best_i to the BVC format, see AMD#23446 */ + + /* + * The processor doesn't respond to inquiry cycles while changing the + * frequency, so we must disable cache. + */ + local_irq_disable(); + cr0 = read_cr0(); + write_cr0(cr0 | X86_CR0_CD); + wbinvd(); + + outvalue = (1<<12) | (1<<10) | (1<<9) | (index_to_register[best_i]<<5); + + msrval = POWERNOW_IOPORT + 0x1; + wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ + invalue = inl(POWERNOW_IOPORT + 0x8); + invalue = invalue & 0x1f; + outvalue = outvalue | invalue; + outl(outvalue, (POWERNOW_IOPORT + 0x8)); + msrval = POWERNOW_IOPORT + 0x0; + wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ + + write_cr0(cr0); + local_irq_enable(); +} + +/** + * powernow_k6_target - set the PowerNow! multiplier + * @best_i: clock_ratio[best_i] is the target multiplier + * + * Tries to change the PowerNow! multiplier + */ +static int powernow_k6_target(struct cpufreq_policy *policy, + unsigned int best_i) +{ + + if (clock_ratio[best_i].driver_data > max_multiplier) { + printk(KERN_ERR PFX "invalid target frequency\n"); + return -EINVAL; + } + + powernow_k6_set_cpu_multiplier(best_i); + + return 0; +} + +static int powernow_k6_cpu_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos; + unsigned int i, f; + unsigned khz; + + if (policy->cpu != 0) + return -ENODEV; + + max_multiplier = 0; + khz = cpu_khz; + for (i = 0; i < ARRAY_SIZE(usual_frequency_table); i++) { + if (khz >= usual_frequency_table[i].freq - FREQ_RANGE && + khz <= usual_frequency_table[i].freq + FREQ_RANGE) { + khz = usual_frequency_table[i].freq; + max_multiplier = usual_frequency_table[i].mult; + break; + } + } + if (param_max_multiplier) { + cpufreq_for_each_entry(pos, clock_ratio) + if (pos->driver_data == param_max_multiplier) { + max_multiplier = param_max_multiplier; + goto have_max_multiplier; + } + printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n"); + return -EINVAL; + } + + if (!max_multiplier) { + printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz); + printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n"); + return -EOPNOTSUPP; + } + +have_max_multiplier: + param_max_multiplier = max_multiplier; + + if (param_busfreq) { + if (param_busfreq >= 50000 && param_busfreq <= 150000) { + busfreq = param_busfreq / 10; + goto have_busfreq; + } + printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); + return -EINVAL; + } + + busfreq = khz / max_multiplier; +have_busfreq: + param_busfreq = busfreq * 10; + + /* table init */ + cpufreq_for_each_entry(pos, clock_ratio) { + f = pos->driver_data; + if (f > max_multiplier) + pos->frequency = CPUFREQ_ENTRY_INVALID; + else + pos->frequency = busfreq * f; + } + + /* cpuinfo and default policy values */ + policy->cpuinfo.transition_latency = 500000; + + return cpufreq_table_validate_and_show(policy, clock_ratio); +} + + +static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int i; + + for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + if (clock_ratio[i].driver_data == max_multiplier) { + struct cpufreq_freqs freqs; + + freqs.old = policy->cur; + freqs.new = clock_ratio[i].frequency; + freqs.flags = 0; + + cpufreq_freq_transition_begin(policy, &freqs); + powernow_k6_target(policy, i); + cpufreq_freq_transition_end(policy, &freqs, 0); + break; + } + } + return 0; +} + +static unsigned int powernow_k6_get(unsigned int cpu) +{ + unsigned int ret; + ret = (busfreq * powernow_k6_get_cpu_multiplier()); + return ret; +} + +static struct cpufreq_driver powernow_k6_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernow_k6_target, + .init = powernow_k6_cpu_init, + .exit = powernow_k6_cpu_exit, + .get = powernow_k6_get, + .name = "powernow-k6", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id powernow_k6_ids[] = { + { X86_VENDOR_AMD, 5, 12 }, + { X86_VENDOR_AMD, 5, 13 }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, powernow_k6_ids); + +/** + * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver + * + * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported + * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero + * on success. + */ +static int __init powernow_k6_init(void) +{ + if (!x86_match_cpu(powernow_k6_ids)) + return -ENODEV; + + if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { + printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); + return -EIO; + } + + if (cpufreq_register_driver(&powernow_k6_driver)) { + release_region(POWERNOW_IOPORT, 16); + return -EINVAL; + } + + return 0; +} + + +/** + * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support + * + * Unregisters AMD K6-2+ / K6-3+ PowerNow! support. + */ +static void __exit powernow_k6_exit(void) +{ + cpufreq_unregister_driver(&powernow_k6_driver); + release_region(POWERNOW_IOPORT, 16); +} + + +MODULE_AUTHOR("Arjan van de Ven, Dave Jones, " + "Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); +MODULE_LICENSE("GPL"); + +module_init(powernow_k6_init); +module_exit(powernow_k6_exit); diff --git a/kernel/drivers/cpufreq/powernow-k7.c b/kernel/drivers/cpufreq/powernow-k7.c new file mode 100644 index 000000000..37c574248 --- /dev/null +++ b/kernel/drivers/cpufreq/powernow-k7.c @@ -0,0 +1,709 @@ +/* + * AMD K7 Powernow driver. + * (C) 2003 Dave Jones on behalf of SuSE Labs. + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon datasheets & sample CPUs kindly provided by AMD. + * + * Errata 5: + * CPU may fail to execute a FID/VID change in presence of interrupt. + * - We cli/sti on stepping A0 CPUs around the FID/VID transition. + * Errata 15: + * CPU with half frequency multipliers may hang upon wakeup from disconnect. + * - We disable half multipliers if ACPI is used on A0 stepping CPUs. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/dmi.h> +#include <linux/timex.h> +#include <linux/io.h> + +#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ +#include <asm/msr.h> +#include <asm/cpu_device_id.h> + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI +#include <linux/acpi.h> +#include <acpi/processor.h> +#endif + +#include "powernow-k7.h" + +#define PFX "powernow: " + + +struct psb_s { + u8 signature[10]; + u8 tableversion; + u8 flags; + u16 settlingtime; + u8 reserved1; + u8 numpst; +}; + +struct pst_s { + u32 cpuid; + u8 fsbspeed; + u8 maxfid; + u8 startvid; + u8 numpstates; +}; + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI +union powernow_acpi_control_t { + struct { + unsigned long fid:5, + vid:5, + sgtc:20, + res1:2; + } bits; + unsigned long val; +}; +#endif + +/* divide by 1000 to get VCore voltage in V. */ +static const int mobile_vid_table[32] = { + 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, + 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, + 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, + 1075, 1050, 1025, 1000, 975, 950, 925, 0, +}; + +/* divide by 10 to get FID. */ +static const int fid_codes[32] = { + 110, 115, 120, 125, 50, 55, 60, 65, + 70, 75, 80, 85, 90, 95, 100, 105, + 30, 190, 40, 200, 130, 135, 140, 210, + 150, 225, 160, 165, 170, 180, -1, -1, +}; + +/* This parameter is used in order to force ACPI instead of legacy method for + * configuration purpose. + */ + +static int acpi_force; + +static struct cpufreq_frequency_table *powernow_table; + +static unsigned int can_scale_bus; +static unsigned int can_scale_vid; +static unsigned int minimum_speed = -1; +static unsigned int maximum_speed; +static unsigned int number_scales; +static unsigned int fsb; +static unsigned int latency; +static char have_a0; + +static int check_fsb(unsigned int fsbspeed) +{ + int delta; + unsigned int f = fsb / 1000; + + delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; + return delta < 5; +} + +static const struct x86_cpu_id powernow_k7_cpuids[] = { + { X86_VENDOR_AMD, 6, }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids); + +static int check_powernow(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + unsigned int maxei, eax, ebx, ecx, edx; + + if (!x86_match_cpu(powernow_k7_cpuids)) + return 0; + + /* Get maximum capabilities */ + maxei = cpuid_eax(0x80000000); + if (maxei < 0x80000007) { /* Any powernow info ? */ +#ifdef MODULE + printk(KERN_INFO PFX "No powernow capabilities detected\n"); +#endif + return 0; + } + + if ((c->x86_model == 6) && (c->x86_mask == 0)) { + printk(KERN_INFO PFX "K7 660[A0] core detected, " + "enabling errata workarounds\n"); + have_a0 = 1; + } + + cpuid(0x80000007, &eax, &ebx, &ecx, &edx); + + /* Check we can actually do something before we say anything.*/ + if (!(edx & (1 << 1 | 1 << 2))) + return 0; + + printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); + + if (edx & 1 << 1) { + printk("frequency"); + can_scale_bus = 1; + } + + if ((edx & (1 << 1 | 1 << 2)) == 0x6) + printk(" and "); + + if (edx & 1 << 2) { + printk("voltage"); + can_scale_vid = 1; + } + + printk(".\n"); + return 1; +} + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI +static void invalidate_entry(unsigned int entry) +{ + powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} +#endif + +static int get_ranges(unsigned char *pst) +{ + unsigned int j; + unsigned int speed; + u8 fid, vid; + + powernow_table = kzalloc((sizeof(*powernow_table) * + (number_scales + 1)), GFP_KERNEL); + if (!powernow_table) + return -ENOMEM; + + for (j = 0 ; j < number_scales; j++) { + fid = *pst++; + + powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; + powernow_table[j].driver_data = fid; /* lower 8 bits */ + + speed = powernow_table[j].frequency; + + if ((fid_codes[fid] % 10) == 5) { +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + if (have_a0 == 1) + invalidate_entry(j); +#endif + } + + if (speed < minimum_speed) + minimum_speed = speed; + if (speed > maximum_speed) + maximum_speed = speed; + + vid = *pst++; + powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */ + + pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, + mobile_vid_table[vid]/1000, + mobile_vid_table[vid]%1000); + } + powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; + powernow_table[number_scales].driver_data = 0; + + return 0; +} + + +static void change_FID(int fid) +{ + union msr_fidvidctl fidvidctl; + + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); + if (fidvidctl.bits.FID != fid) { + fidvidctl.bits.SGTC = latency; + fidvidctl.bits.FID = fid; + fidvidctl.bits.VIDC = 0; + fidvidctl.bits.FIDC = 1; + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); + } +} + + +static void change_VID(int vid) +{ + union msr_fidvidctl fidvidctl; + + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); + if (fidvidctl.bits.VID != vid) { + fidvidctl.bits.SGTC = latency; + fidvidctl.bits.VID = vid; + fidvidctl.bits.FIDC = 0; + fidvidctl.bits.VIDC = 1; + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); + } +} + + +static int powernow_target(struct cpufreq_policy *policy, unsigned int index) +{ + u8 fid, vid; + struct cpufreq_freqs freqs; + union msr_fidvidstatus fidvidstatus; + int cfid; + + /* fid are the lower 8 bits of the index we stored into + * the cpufreq frequency table in powernow_decode_bios, + * vid are the upper 8 bits. + */ + + fid = powernow_table[index].driver_data & 0xFF; + vid = (powernow_table[index].driver_data & 0xFF00) >> 8; + + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); + cfid = fidvidstatus.bits.CFID; + freqs.old = fsb * fid_codes[cfid] / 10; + + freqs.new = powernow_table[index].frequency; + + /* Now do the magic poking into the MSRs. */ + + if (have_a0 == 1) /* A0 errata 5 */ + local_irq_disable(); + + if (freqs.old > freqs.new) { + /* Going down, so change FID first */ + change_FID(fid); + change_VID(vid); + } else { + /* Going up, so change VID first */ + change_VID(vid); + change_FID(fid); + } + + + if (have_a0 == 1) + local_irq_enable(); + + return 0; +} + + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + +static struct acpi_processor_performance *acpi_processor_perf; + +static int powernow_acpi_init(void) +{ + int i; + int retval = 0; + union powernow_acpi_control_t pc; + + if (acpi_processor_perf != NULL && powernow_table != NULL) { + retval = -EINVAL; + goto err0; + } + + acpi_processor_perf = kzalloc(sizeof(*acpi_processor_perf), GFP_KERNEL); + if (!acpi_processor_perf) { + retval = -ENOMEM; + goto err0; + } + + if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, + GFP_KERNEL)) { + retval = -ENOMEM; + goto err05; + } + + if (acpi_processor_register_performance(acpi_processor_perf, 0)) { + retval = -EIO; + goto err1; + } + + if (acpi_processor_perf->control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { + retval = -ENODEV; + goto err2; + } + + if (acpi_processor_perf->status_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { + retval = -ENODEV; + goto err2; + } + + number_scales = acpi_processor_perf->state_count; + + if (number_scales < 2) { + retval = -ENODEV; + goto err2; + } + + powernow_table = kzalloc((sizeof(*powernow_table) * + (number_scales + 1)), GFP_KERNEL); + if (!powernow_table) { + retval = -ENOMEM; + goto err2; + } + + pc.val = (unsigned long) acpi_processor_perf->states[0].control; + for (i = 0; i < number_scales; i++) { + u8 fid, vid; + struct acpi_processor_px *state = + &acpi_processor_perf->states[i]; + unsigned int speed, speed_mhz; + + pc.val = (unsigned long) state->control; + pr_debug("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", + i, + (u32) state->core_frequency, + (u32) state->power, + (u32) state->transition_latency, + (u32) state->control, + pc.bits.sgtc); + + vid = pc.bits.vid; + fid = pc.bits.fid; + + powernow_table[i].frequency = fsb * fid_codes[fid] / 10; + powernow_table[i].driver_data = fid; /* lower 8 bits */ + powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */ + + speed = powernow_table[i].frequency; + speed_mhz = speed / 1000; + + /* processor_perflib will multiply the MHz value by 1000 to + * get a KHz value (e.g. 1266000). However, powernow-k7 works + * with true KHz values (e.g. 1266768). To ensure that all + * powernow frequencies are available, we must ensure that + * ACPI doesn't restrict them, so we round up the MHz value + * to ensure that perflib's computed KHz value is greater than + * or equal to powernow's KHz value. + */ + if (speed % 1000 > 0) + speed_mhz++; + + if ((fid_codes[fid] % 10) == 5) { + if (have_a0 == 1) + invalidate_entry(i); + } + + pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed_mhz, vid, + mobile_vid_table[vid]/1000, + mobile_vid_table[vid]%1000); + + if (state->core_frequency != speed_mhz) { + state->core_frequency = speed_mhz; + pr_debug(" Corrected ACPI frequency to %d\n", + speed_mhz); + } + + if (latency < pc.bits.sgtc) + latency = pc.bits.sgtc; + + if (speed < minimum_speed) + minimum_speed = speed; + if (speed > maximum_speed) + maximum_speed = speed; + } + + powernow_table[i].frequency = CPUFREQ_TABLE_END; + powernow_table[i].driver_data = 0; + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + return 0; + +err2: + acpi_processor_unregister_performance(acpi_processor_perf, 0); +err1: + free_cpumask_var(acpi_processor_perf->shared_cpu_map); +err05: + kfree(acpi_processor_perf); +err0: + printk(KERN_WARNING PFX "ACPI perflib can not be used on " + "this platform\n"); + acpi_processor_perf = NULL; + return retval; +} +#else +static int powernow_acpi_init(void) +{ + printk(KERN_INFO PFX "no support for ACPI processor found." + " Please recompile your kernel with ACPI processor\n"); + return -EINVAL; +} +#endif + +static void print_pst_entry(struct pst_s *pst, unsigned int j) +{ + pr_debug("PST:%d (@%p)\n", j, pst); + pr_debug(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); +} + +static int powernow_decode_bios(int maxfid, int startvid) +{ + struct psb_s *psb; + struct pst_s *pst; + unsigned int i, j; + unsigned char *p; + unsigned int etuple; + unsigned int ret; + + etuple = cpuid_eax(0x80000001); + + for (i = 0xC0000; i < 0xffff0 ; i += 16) { + + p = phys_to_virt(i); + + if (memcmp(p, "AMDK7PNOW!", 10) == 0) { + pr_debug("Found PSB header at %p\n", p); + psb = (struct psb_s *) p; + pr_debug("Table version: 0x%x\n", psb->tableversion); + if (psb->tableversion != 0x12) { + printk(KERN_INFO PFX "Sorry, only v1.2 tables" + " supported right now\n"); + return -ENODEV; + } + + pr_debug("Flags: 0x%x\n", psb->flags); + if ((psb->flags & 1) == 0) + pr_debug("Mobile voltage regulator\n"); + else + pr_debug("Desktop voltage regulator\n"); + + latency = psb->settlingtime; + if (latency < 100) { + printk(KERN_INFO PFX "BIOS set settling time " + "to %d microseconds. " + "Should be at least 100. " + "Correcting.\n", latency); + latency = 100; + } + pr_debug("Settling Time: %d microseconds.\n", + psb->settlingtime); + pr_debug("Has %d PST tables. (Only dumping ones " + "relevant to this CPU).\n", + psb->numpst); + + p += sizeof(*psb); + + pst = (struct pst_s *) p; + + for (j = 0; j < psb->numpst; j++) { + pst = (struct pst_s *) p; + number_scales = pst->numpstates; + + if ((etuple == pst->cpuid) && + check_fsb(pst->fsbspeed) && + (maxfid == pst->maxfid) && + (startvid == pst->startvid)) { + print_pst_entry(pst, j); + p = (char *)pst + sizeof(*pst); + ret = get_ranges(p); + return ret; + } else { + unsigned int k; + p = (char *)pst + sizeof(*pst); + for (k = 0; k < number_scales; k++) + p += 2; + } + } + printk(KERN_INFO PFX "No PST tables match this cpuid " + "(0x%x)\n", etuple); + printk(KERN_INFO PFX "This is indicative of a broken " + "BIOS.\n"); + + return -EINVAL; + } + p++; + } + + return -ENODEV; +} + + +/* + * We use the fact that the bus frequency is somehow + * a multiple of 100000/3 khz, then we compute sgtc according + * to this multiple. + * That way, we match more how AMD thinks all of that work. + * We will then get the same kind of behaviour already tested under + * the "well-known" other OS. + */ +static int fixup_sgtc(void) +{ + unsigned int sgtc; + unsigned int m; + + m = fsb / 3333; + if ((m % 10) >= 5) + m += 5; + + m /= 10; + + sgtc = 100 * m * latency; + sgtc = sgtc / 3; + if (sgtc > 0xfffff) { + printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); + sgtc = 0xfffff; + } + return sgtc; +} + +static unsigned int powernow_get(unsigned int cpu) +{ + union msr_fidvidstatus fidvidstatus; + unsigned int cfid; + + if (cpu) + return 0; + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); + cfid = fidvidstatus.bits.CFID; + + return fsb * fid_codes[cfid] / 10; +} + + +static int acer_cpufreq_pst(const struct dmi_system_id *d) +{ + printk(KERN_WARNING PFX + "%s laptop with broken PST tables in BIOS detected.\n", + d->ident); + printk(KERN_WARNING PFX + "You need to downgrade to 3A21 (09/09/2002), or try a newer " + "BIOS than 3A71 (01/20/2003)\n"); + printk(KERN_WARNING PFX + "cpufreq scaling has been disabled as a result of this.\n"); + return 0; +} + +/* + * Some Athlon laptops have really fucked PST tables. + * A BIOS update is all that can save them. + * Mention this, and disable cpufreq. + */ +static struct dmi_system_id powernow_dmi_table[] = { + { + .callback = acer_cpufreq_pst, + .ident = "Acer Aspire", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), + DMI_MATCH(DMI_BIOS_VERSION, "3A71"), + }, + }, + { } +}; + +static int powernow_cpu_init(struct cpufreq_policy *policy) +{ + union msr_fidvidstatus fidvidstatus; + int result; + + if (policy->cpu != 0) + return -ENODEV; + + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); + + recalibrate_cpu_khz(); + + fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; + if (!fsb) { + printk(KERN_WARNING PFX "can not determine bus frequency\n"); + return -EINVAL; + } + pr_debug("FSB: %3dMHz\n", fsb/1000); + + if (dmi_check_system(powernow_dmi_table) || acpi_force) { + printk(KERN_INFO PFX "PSB/PST known to be broken. " + "Trying ACPI instead\n"); + result = powernow_acpi_init(); + } else { + result = powernow_decode_bios(fidvidstatus.bits.MFID, + fidvidstatus.bits.SVID); + if (result) { + printk(KERN_INFO PFX "Trying ACPI perflib\n"); + maximum_speed = 0; + minimum_speed = -1; + latency = 0; + result = powernow_acpi_init(); + if (result) { + printk(KERN_INFO PFX + "ACPI and legacy methods failed\n"); + } + } else { + /* SGTC use the bus clock as timer */ + latency = fixup_sgtc(); + printk(KERN_INFO PFX "SGTC: %d\n", latency); + } + } + + if (result) + return result; + + printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", + minimum_speed/1000, maximum_speed/1000); + + policy->cpuinfo.transition_latency = + cpufreq_scale(2000000UL, fsb, latency); + + return cpufreq_table_validate_and_show(policy, powernow_table); +} + +static int powernow_cpu_exit(struct cpufreq_policy *policy) +{ +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + if (acpi_processor_perf) { + acpi_processor_unregister_performance(acpi_processor_perf, 0); + free_cpumask_var(acpi_processor_perf->shared_cpu_map); + kfree(acpi_processor_perf); + } +#endif + + kfree(powernow_table); + return 0; +} + +static struct cpufreq_driver powernow_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernow_target, + .get = powernow_get, +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + .bios_limit = acpi_processor_get_bios_limit, +#endif + .init = powernow_cpu_init, + .exit = powernow_cpu_exit, + .name = "powernow-k7", + .attr = cpufreq_generic_attr, +}; + +static int __init powernow_init(void) +{ + if (check_powernow() == 0) + return -ENODEV; + return cpufreq_register_driver(&powernow_driver); +} + + +static void __exit powernow_exit(void) +{ + cpufreq_unregister_driver(&powernow_driver); +} + +module_param(acpi_force, int, 0444); +MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); + +MODULE_AUTHOR("Dave Jones"); +MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); +MODULE_LICENSE("GPL"); + +late_initcall(powernow_init); +module_exit(powernow_exit); + diff --git a/kernel/drivers/cpufreq/powernow-k7.h b/kernel/drivers/cpufreq/powernow-k7.h new file mode 100644 index 000000000..35fb4eaf6 --- /dev/null +++ b/kernel/drivers/cpufreq/powernow-k7.h @@ -0,0 +1,43 @@ +/* + * (C) 2003 Dave Jones. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * AMD-specific information + * + */ + +union msr_fidvidctl { + struct { + unsigned FID:5, // 4:0 + reserved1:3, // 7:5 + VID:5, // 12:8 + reserved2:3, // 15:13 + FIDC:1, // 16 + VIDC:1, // 17 + reserved3:2, // 19:18 + FIDCHGRATIO:1, // 20 + reserved4:11, // 31-21 + SGTC:20, // 32:51 + reserved5:12; // 63:52 + } bits; + unsigned long long val; +}; + +union msr_fidvidstatus { + struct { + unsigned CFID:5, // 4:0 + reserved1:3, // 7:5 + SFID:5, // 12:8 + reserved2:3, // 15:13 + MFID:5, // 20:16 + reserved3:11, // 31:21 + CVID:5, // 36:32 + reserved4:3, // 39:37 + SVID:5, // 44:40 + reserved5:3, // 47:45 + MVID:5, // 52:48 + reserved6:11; // 63:53 + } bits; + unsigned long long val; +}; diff --git a/kernel/drivers/cpufreq/powernow-k8.c b/kernel/drivers/cpufreq/powernow-k8.c new file mode 100644 index 000000000..f9ce7e4bf --- /dev/null +++ b/kernel/drivers/cpufreq/powernow-k8.c @@ -0,0 +1,1249 @@ +/* + * (c) 2003-2012 Advanced Micro Devices, Inc. + * Your use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + * + * Maintainer: + * Andreas Herrmann <herrmann.der.user@googlemail.com> + * + * Based on the powernow-k7.c module written by Dave Jones. + * (C) 2003 Dave Jones on behalf of SuSE Labs + * (C) 2004 Dominik Brodowski <linux@brodo.de> + * (C) 2004 Pavel Machek <pavel@ucw.cz> + * Licensed under the terms of the GNU GPL License version 2. + * Based upon datasheets & sample CPUs kindly provided by AMD. + * + * Valuable input gratefully received from Dave Jones, Pavel Machek, + * Dominik Brodowski, Jacob Shin, and others. + * Originally developed by Paul Devriendt. + * + * Processor information obtained from Chapter 9 (Power and Thermal + * Management) of the "BIOS and Kernel Developer's Guide (BKDG) for + * the AMD Athlon 64 and AMD Opteron Processors" and section "2.x + * Power Management" in BKDGs for newer AMD CPU families. + * + * Tables for specific CPUs can be inferred from AMD's processor + * power and thermal data sheets, (e.g. 30417.pdf, 30430.pdf, 43375.pdf) + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/cpumask.h> +#include <linux/io.h> +#include <linux/delay.h> + +#include <asm/msr.h> +#include <asm/cpu_device_id.h> + +#include <linux/acpi.h> +#include <linux/mutex.h> +#include <acpi/processor.h> + +#define VERSION "version 2.20.00" +#include "powernow-k8.h" + +/* serialize freq changes */ +static DEFINE_MUTEX(fidvid_mutex); + +static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); + +static struct cpufreq_driver cpufreq_amd64_driver; + +#ifndef CONFIG_SMP +static inline const struct cpumask *cpu_core_mask(int cpu) +{ + return cpumask_of(0); +} +#endif + +/* Return a frequency in MHz, given an input fid */ +static u32 find_freq_from_fid(u32 fid) +{ + return 800 + (fid * 100); +} + +/* Return a frequency in KHz, given an input fid */ +static u32 find_khz_freq_from_fid(u32 fid) +{ + return 1000 * find_freq_from_fid(fid); +} + +/* Return the vco fid for an input fid + * + * Each "low" fid has corresponding "high" fid, and you can get to "low" fids + * only from corresponding high fids. This returns "high" fid corresponding to + * "low" one. + */ +static u32 convert_fid_to_vco_fid(u32 fid) +{ + if (fid < HI_FID_TABLE_BOTTOM) + return 8 + (2 * fid); + else + return fid; +} + +/* + * Return 1 if the pending bit is set. Unless we just instructed the processor + * to transition to a new state, seeing this bit set is really bad news. + */ +static int pending_bit_stuck(void) +{ + u32 lo, hi; + + rdmsr(MSR_FIDVID_STATUS, lo, hi); + return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; +} + +/* + * Update the global current fid / vid values from the status msr. + * Returns 1 on error. + */ +static int query_current_values_with_pending_wait(struct powernow_k8_data *data) +{ + u32 lo, hi; + u32 i = 0; + + do { + if (i++ > 10000) { + pr_debug("detected change pending stuck\n"); + return 1; + } + rdmsr(MSR_FIDVID_STATUS, lo, hi); + } while (lo & MSR_S_LO_CHANGE_PENDING); + + data->currvid = hi & MSR_S_HI_CURRENT_VID; + data->currfid = lo & MSR_S_LO_CURRENT_FID; + + return 0; +} + +/* the isochronous relief time */ +static void count_off_irt(struct powernow_k8_data *data) +{ + udelay((1 << data->irt) * 10); + return; +} + +/* the voltage stabilization time */ +static void count_off_vst(struct powernow_k8_data *data) +{ + udelay(data->vstable * VST_UNITS_20US); + return; +} + +/* need to init the control msr to a safe value (for each cpu) */ +static void fidvid_msr_init(void) +{ + u32 lo, hi; + u8 fid, vid; + + rdmsr(MSR_FIDVID_STATUS, lo, hi); + vid = hi & MSR_S_HI_CURRENT_VID; + fid = lo & MSR_S_LO_CURRENT_FID; + lo = fid | (vid << MSR_C_LO_VID_SHIFT); + hi = MSR_C_HI_STP_GNT_BENIGN; + pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi); + wrmsr(MSR_FIDVID_CTL, lo, hi); +} + +/* write the new fid value along with the other control fields to the msr */ +static int write_new_fid(struct powernow_k8_data *data, u32 fid) +{ + u32 lo; + u32 savevid = data->currvid; + u32 i = 0; + + if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { + pr_err("internal error - overflow on fid write\n"); + return 1; + } + + lo = fid; + lo |= (data->currvid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; + + pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n", + fid, lo, data->plllock * PLL_LOCK_CONVERSION); + + do { + wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); + if (i++ > 100) { + pr_err("Hardware error - pending bit very stuck - no further pstate changes possible\n"); + return 1; + } + } while (query_current_values_with_pending_wait(data)); + + count_off_irt(data); + + if (savevid != data->currvid) { + pr_err("vid change on fid trans, old 0x%x, new 0x%x\n", + savevid, data->currvid); + return 1; + } + + if (fid != data->currfid) { + pr_err("fid trans failed, fid 0x%x, curr 0x%x\n", fid, + data->currfid); + return 1; + } + + return 0; +} + +/* Write a new vid to the hardware */ +static int write_new_vid(struct powernow_k8_data *data, u32 vid) +{ + u32 lo; + u32 savefid = data->currfid; + int i = 0; + + if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { + pr_err("internal error - overflow on vid write\n"); + return 1; + } + + lo = data->currfid; + lo |= (vid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; + + pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n", + vid, lo, STOP_GRANT_5NS); + + do { + wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); + if (i++ > 100) { + pr_err("internal error - pending bit very stuck - no further pstate changes possible\n"); + return 1; + } + } while (query_current_values_with_pending_wait(data)); + + if (savefid != data->currfid) { + pr_err("fid changed on vid trans, old 0x%x new 0x%x\n", + savefid, data->currfid); + return 1; + } + + if (vid != data->currvid) { + pr_err("vid trans failed, vid 0x%x, curr 0x%x\n", + vid, data->currvid); + return 1; + } + + return 0; +} + +/* + * Reduce the vid by the max of step or reqvid. + * Decreasing vid codes represent increasing voltages: + * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. + */ +static int decrease_vid_code_by_step(struct powernow_k8_data *data, + u32 reqvid, u32 step) +{ + if ((data->currvid - reqvid) > step) + reqvid = data->currvid - step; + + if (write_new_vid(data, reqvid)) + return 1; + + count_off_vst(data); + + return 0; +} + +/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ +static int transition_fid_vid(struct powernow_k8_data *data, + u32 reqfid, u32 reqvid) +{ + if (core_voltage_pre_transition(data, reqvid, reqfid)) + return 1; + + if (core_frequency_transition(data, reqfid)) + return 1; + + if (core_voltage_post_transition(data, reqvid)) + return 1; + + if (query_current_values_with_pending_wait(data)) + return 1; + + if ((reqfid != data->currfid) || (reqvid != data->currvid)) { + pr_err("failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", + smp_processor_id(), + reqfid, reqvid, data->currfid, data->currvid); + return 1; + } + + pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", + smp_processor_id(), data->currfid, data->currvid); + + return 0; +} + +/* Phase 1 - core voltage transition ... setup voltage */ +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid, u32 reqfid) +{ + u32 rvosteps = data->rvo; + u32 savefid = data->currfid; + u32 maxvid, lo, rvomult = 1; + + pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid, reqvid, data->rvo); + + if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) + rvomult = 2; + rvosteps *= rvomult; + rdmsr(MSR_FIDVID_STATUS, lo, maxvid); + maxvid = 0x1f & (maxvid >> 16); + pr_debug("ph1 maxvid=0x%x\n", maxvid); + if (reqvid < maxvid) /* lower numbers are higher voltages */ + reqvid = maxvid; + + while (data->currvid > reqvid) { + pr_debug("ph1: curr 0x%x, req vid 0x%x\n", + data->currvid, reqvid); + if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) + return 1; + } + + while ((rvosteps > 0) && + ((rvomult * data->rvo + data->currvid) > reqvid)) { + if (data->currvid == maxvid) { + rvosteps = 0; + } else { + pr_debug("ph1: changing vid for rvo, req 0x%x\n", + data->currvid - 1); + if (decrease_vid_code_by_step(data, data->currvid-1, 1)) + return 1; + rvosteps--; + } + } + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (savefid != data->currfid) { + pr_err("ph1 err, currfid changed 0x%x\n", data->currfid); + return 1; + } + + pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +/* Phase 2 - core frequency transition */ +static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) +{ + u32 vcoreqfid, vcocurrfid, vcofiddiff; + u32 fid_interval, savevid = data->currvid; + + if (data->currfid == reqfid) { + pr_err("ph2 null fid transition 0x%x\n", data->currfid); + return 0; + } + + pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid, reqfid); + + vcoreqfid = convert_fid_to_vco_fid(reqfid); + vcocurrfid = convert_fid_to_vco_fid(data->currfid); + vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid + : vcoreqfid - vcocurrfid; + + if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) + vcofiddiff = 0; + + while (vcofiddiff > 2) { + (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); + + if (reqfid > data->currfid) { + if (data->currfid > LO_FID_TABLE_TOP) { + if (write_new_fid(data, + data->currfid + fid_interval)) + return 1; + } else { + if (write_new_fid + (data, + 2 + convert_fid_to_vco_fid(data->currfid))) + return 1; + } + } else { + if (write_new_fid(data, data->currfid - fid_interval)) + return 1; + } + + vcocurrfid = convert_fid_to_vco_fid(data->currfid); + vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid + : vcoreqfid - vcocurrfid; + } + + if (write_new_fid(data, reqfid)) + return 1; + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (data->currfid != reqfid) { + pr_err("ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", + data->currfid, reqfid); + return 1; + } + + if (savevid != data->currvid) { + pr_err("ph2: vid changed, save 0x%x, curr 0x%x\n", + savevid, data->currvid); + return 1; + } + + pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +/* Phase 3 - core voltage transition flow ... jump to the final vid. */ +static int core_voltage_post_transition(struct powernow_k8_data *data, + u32 reqvid) +{ + u32 savefid = data->currfid; + u32 savereqvid = reqvid; + + pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid); + + if (reqvid != data->currvid) { + if (write_new_vid(data, reqvid)) + return 1; + + if (savefid != data->currfid) { + pr_err("ph3: bad fid change, save 0x%x, curr 0x%x\n", + savefid, data->currfid); + return 1; + } + + if (data->currvid != reqvid) { + pr_err("ph3: failed vid transition\n, req 0x%x, curr 0x%x", + reqvid, data->currvid); + return 1; + } + } + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (savereqvid != data->currvid) { + pr_debug("ph3 failed, currvid 0x%x\n", data->currvid); + return 1; + } + + if (savefid != data->currfid) { + pr_debug("ph3 failed, currfid changed 0x%x\n", + data->currfid); + return 1; + } + + pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +static const struct x86_cpu_id powernow_k8_ids[] = { + /* IO based frequency switching */ + { X86_VENDOR_AMD, 0xf }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids); + +static void check_supported_cpu(void *_rc) +{ + u32 eax, ebx, ecx, edx; + int *rc = _rc; + + *rc = -ENODEV; + + eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + + if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { + if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || + ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { + pr_info("Processor cpuid %x not supported\n", eax); + return; + } + + eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); + if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { + pr_info("No frequency change capabilities detected\n"); + return; + } + + cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); + if ((edx & P_STATE_TRANSITION_CAPABLE) + != P_STATE_TRANSITION_CAPABLE) { + pr_info("Power state transitions not supported\n"); + return; + } + *rc = 0; + } +} + +static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, + u8 maxvid) +{ + unsigned int j; + u8 lastfid = 0xff; + + for (j = 0; j < data->numps; j++) { + if (pst[j].vid > LEAST_VID) { + pr_err(FW_BUG "vid %d invalid : 0x%x\n", j, + pst[j].vid); + return -EINVAL; + } + if (pst[j].vid < data->rvo) { + /* vid + rvo >= 0 */ + pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (pst[j].vid < maxvid + data->rvo) { + /* vid + rvo >= maxvid */ + pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (pst[j].fid > MAX_FID) { + pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { + /* Only first fid is allowed to be in "low" range */ + pr_err(FW_BUG "two low fids - %d : 0x%x\n", j, + pst[j].fid); + return -EINVAL; + } + if (pst[j].fid < lastfid) + lastfid = pst[j].fid; + } + if (lastfid & 1) { + pr_err(FW_BUG "lastfid invalid\n"); + return -EINVAL; + } + if (lastfid > LO_FID_TABLE_TOP) + pr_info(FW_BUG "first fid not from lo freq table\n"); + + return 0; +} + +static void invalidate_entry(struct cpufreq_frequency_table *powernow_table, + unsigned int entry) +{ + powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} + +static void print_basics(struct powernow_k8_data *data) +{ + int j; + for (j = 0; j < data->numps; j++) { + if (data->powernow_table[j].frequency != + CPUFREQ_ENTRY_INVALID) { + pr_info("fid 0x%x (%d MHz), vid 0x%x\n", + data->powernow_table[j].driver_data & 0xff, + data->powernow_table[j].frequency/1000, + data->powernow_table[j].driver_data >> 8); + } + } + if (data->batps) + pr_info("Only %d pstates on battery\n", data->batps); +} + +static int fill_powernow_table(struct powernow_k8_data *data, + struct pst_s *pst, u8 maxvid) +{ + struct cpufreq_frequency_table *powernow_table; + unsigned int j; + + if (data->batps) { + /* use ACPI support to get full speed on mains power */ + pr_warn("Only %d pstates usable (use ACPI driver for full range\n", + data->batps); + data->numps = data->batps; + } + + for (j = 1; j < data->numps; j++) { + if (pst[j-1].fid >= pst[j].fid) { + pr_err("PST out of sequence\n"); + return -EINVAL; + } + } + + if (data->numps < 2) { + pr_err("no p states to transition\n"); + return -ENODEV; + } + + if (check_pst_table(data, pst, maxvid)) + return -EINVAL; + + powernow_table = kzalloc((sizeof(*powernow_table) + * (data->numps + 1)), GFP_KERNEL); + if (!powernow_table) { + pr_err("powernow_table memory alloc failure\n"); + return -ENOMEM; + } + + for (j = 0; j < data->numps; j++) { + int freq; + powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */ + powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */ + freq = find_khz_freq_from_fid(pst[j].fid); + powernow_table[j].frequency = freq; + } + powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; + powernow_table[data->numps].driver_data = 0; + + if (query_current_values_with_pending_wait(data)) { + kfree(powernow_table); + return -EIO; + } + + pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); + data->powernow_table = powernow_table; + if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) + print_basics(data); + + for (j = 0; j < data->numps; j++) + if ((pst[j].fid == data->currfid) && + (pst[j].vid == data->currvid)) + return 0; + + pr_debug("currfid/vid do not match PST, ignoring\n"); + return 0; +} + +/* Find and validate the PSB/PST table in BIOS. */ +static int find_psb_table(struct powernow_k8_data *data) +{ + struct psb_s *psb; + unsigned int i; + u32 mvs; + u8 maxvid; + u32 cpst = 0; + u32 thiscpuid; + + for (i = 0xc0000; i < 0xffff0; i += 0x10) { + /* Scan BIOS looking for the signature. */ + /* It can not be at ffff0 - it is too big. */ + + psb = phys_to_virt(i); + if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) + continue; + + pr_debug("found PSB header at 0x%p\n", psb); + + pr_debug("table vers: 0x%x\n", psb->tableversion); + if (psb->tableversion != PSB_VERSION_1_4) { + pr_err(FW_BUG "PSB table is not v1.4\n"); + return -ENODEV; + } + + pr_debug("flags: 0x%x\n", psb->flags1); + if (psb->flags1) { + pr_err(FW_BUG "unknown flags\n"); + return -ENODEV; + } + + data->vstable = psb->vstable; + pr_debug("voltage stabilization time: %d(*20us)\n", + data->vstable); + + pr_debug("flags2: 0x%x\n", psb->flags2); + data->rvo = psb->flags2 & 3; + data->irt = ((psb->flags2) >> 2) & 3; + mvs = ((psb->flags2) >> 4) & 3; + data->vidmvs = 1 << mvs; + data->batps = ((psb->flags2) >> 6) & 3; + + pr_debug("ramp voltage offset: %d\n", data->rvo); + pr_debug("isochronous relief time: %d\n", data->irt); + pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); + + pr_debug("numpst: 0x%x\n", psb->num_tables); + cpst = psb->num_tables; + if ((psb->cpuid == 0x00000fc0) || + (psb->cpuid == 0x00000fe0)) { + thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + if ((thiscpuid == 0x00000fc0) || + (thiscpuid == 0x00000fe0)) + cpst = 1; + } + if (cpst != 1) { + pr_err(FW_BUG "numpst must be 1\n"); + return -ENODEV; + } + + data->plllock = psb->plllocktime; + pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); + pr_debug("maxfid: 0x%x\n", psb->maxfid); + pr_debug("maxvid: 0x%x\n", psb->maxvid); + maxvid = psb->maxvid; + + data->numps = psb->numps; + pr_debug("numpstates: 0x%x\n", data->numps); + return fill_powernow_table(data, + (struct pst_s *)(psb+1), maxvid); + } + /* + * If you see this message, complain to BIOS manufacturer. If + * he tells you "we do not support Linux" or some similar + * nonsense, remember that Windows 2000 uses the same legacy + * mechanism that the old Linux PSB driver uses. Tell them it + * is broken with Windows 2000. + * + * The reference to the AMD documentation is chapter 9 in the + * BIOS and Kernel Developer's Guide, which is available on + * www.amd.com + */ + pr_err(FW_BUG "No PSB or ACPI _PSS objects\n"); + pr_err("Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup\n"); + return -ENODEV; +} + +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, + unsigned int index) +{ + u64 control; + + if (!data->acpi_data.state_count) + return; + + control = data->acpi_data.states[index].control; + data->irt = (control >> IRT_SHIFT) & IRT_MASK; + data->rvo = (control >> RVO_SHIFT) & RVO_MASK; + data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; + data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; + data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK); + data->vstable = (control >> VST_SHIFT) & VST_MASK; +} + +static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) +{ + struct cpufreq_frequency_table *powernow_table; + int ret_val = -ENODEV; + u64 control, status; + + if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { + pr_debug("register performance failed: bad ACPI data\n"); + return -EIO; + } + + /* verify the data contained in the ACPI structures */ + if (data->acpi_data.state_count <= 1) { + pr_debug("No ACPI P-States\n"); + goto err_out; + } + + control = data->acpi_data.control_register.space_id; + status = data->acpi_data.status_register.space_id; + + if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + pr_debug("Invalid control/status registers (%llx - %llx)\n", + control, status); + goto err_out; + } + + /* fill in data->powernow_table */ + powernow_table = kzalloc((sizeof(*powernow_table) + * (data->acpi_data.state_count + 1)), GFP_KERNEL); + if (!powernow_table) { + pr_debug("powernow_table memory alloc failure\n"); + goto err_out; + } + + /* fill in data */ + data->numps = data->acpi_data.state_count; + powernow_k8_acpi_pst_values(data, 0); + + ret_val = fill_powernow_table_fidvid(data, powernow_table); + if (ret_val) + goto err_out_mem; + + powernow_table[data->acpi_data.state_count].frequency = + CPUFREQ_TABLE_END; + data->powernow_table = powernow_table; + + if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) + print_basics(data); + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { + pr_err("unable to alloc powernow_k8_data cpumask\n"); + ret_val = -ENOMEM; + goto err_out_mem; + } + + return 0; + +err_out_mem: + kfree(powernow_table); + +err_out: + acpi_processor_unregister_performance(&data->acpi_data, data->cpu); + + /* data->acpi_data.state_count informs us at ->exit() + * whether ACPI was used */ + data->acpi_data.state_count = 0; + + return ret_val; +} + +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, + struct cpufreq_frequency_table *powernow_table) +{ + int i; + + for (i = 0; i < data->acpi_data.state_count; i++) { + u32 fid; + u32 vid; + u32 freq, index; + u64 status, control; + + if (data->exttype) { + status = data->acpi_data.states[i].status; + fid = status & EXT_FID_MASK; + vid = (status >> VID_SHIFT) & EXT_VID_MASK; + } else { + control = data->acpi_data.states[i].control; + fid = control & FID_MASK; + vid = (control >> VID_SHIFT) & VID_MASK; + } + + pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); + + index = fid | (vid<<8); + powernow_table[i].driver_data = index; + + freq = find_khz_freq_from_fid(fid); + powernow_table[i].frequency = freq; + + /* verify frequency is OK */ + if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { + pr_debug("invalid freq %u kHz, ignoring\n", freq); + invalidate_entry(powernow_table, i); + continue; + } + + /* verify voltage is OK - + * BIOSs are using "off" to indicate invalid */ + if (vid == VID_OFF) { + pr_debug("invalid vid %u, ignoring\n", vid); + invalidate_entry(powernow_table, i); + continue; + } + + if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { + pr_info("invalid freq entries %u kHz vs. %u kHz\n", + freq, (unsigned int) + (data->acpi_data.states[i].core_frequency + * 1000)); + invalidate_entry(powernow_table, i); + continue; + } + } + return 0; +} + +static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) +{ + if (data->acpi_data.state_count) + acpi_processor_unregister_performance(&data->acpi_data, + data->cpu); + free_cpumask_var(data->acpi_data.shared_cpu_map); +} + +static int get_transition_latency(struct powernow_k8_data *data) +{ + int max_latency = 0; + int i; + for (i = 0; i < data->acpi_data.state_count; i++) { + int cur_latency = data->acpi_data.states[i].transition_latency + + data->acpi_data.states[i].bus_master_latency; + if (cur_latency > max_latency) + max_latency = cur_latency; + } + if (max_latency == 0) { + pr_err(FW_WARN "Invalid zero transition latency\n"); + max_latency = 1; + } + /* value in usecs, needs to be in nanoseconds */ + return 1000 * max_latency; +} + +/* Take a frequency, and issue the fid/vid transition command */ +static int transition_frequency_fidvid(struct powernow_k8_data *data, + unsigned int index) +{ + struct cpufreq_policy *policy; + u32 fid = 0; + u32 vid = 0; + int res; + struct cpufreq_freqs freqs; + + pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index); + + /* fid/vid correctness check for k8 */ + /* fid are the lower 8 bits of the index we stored into + * the cpufreq frequency table in find_psb_table, vid + * are the upper 8 bits. + */ + fid = data->powernow_table[index].driver_data & 0xFF; + vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8; + + pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); + + if (query_current_values_with_pending_wait(data)) + return 1; + + if ((data->currvid == vid) && (data->currfid == fid)) { + pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n", + fid, vid); + return 0; + } + + pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n", + smp_processor_id(), fid, vid); + freqs.old = find_khz_freq_from_fid(data->currfid); + freqs.new = find_khz_freq_from_fid(fid); + + policy = cpufreq_cpu_get(smp_processor_id()); + cpufreq_cpu_put(policy); + + cpufreq_freq_transition_begin(policy, &freqs); + res = transition_fid_vid(data, fid, vid); + cpufreq_freq_transition_end(policy, &freqs, res); + + return res; +} + +struct powernowk8_target_arg { + struct cpufreq_policy *pol; + unsigned newstate; +}; + +static long powernowk8_target_fn(void *arg) +{ + struct powernowk8_target_arg *pta = arg; + struct cpufreq_policy *pol = pta->pol; + unsigned newstate = pta->newstate; + struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); + u32 checkfid; + u32 checkvid; + int ret; + + if (!data) + return -EINVAL; + + checkfid = data->currfid; + checkvid = data->currvid; + + if (pending_bit_stuck()) { + pr_err("failing targ, change pending bit set\n"); + return -EIO; + } + + pr_debug("targ: cpu %d, %d kHz, min %d, max %d\n", + pol->cpu, data->powernow_table[newstate].frequency, pol->min, + pol->max); + + if (query_current_values_with_pending_wait(data)) + return -EIO; + + pr_debug("targ: curr fid 0x%x, vid 0x%x\n", + data->currfid, data->currvid); + + if ((checkvid != data->currvid) || + (checkfid != data->currfid)) { + pr_info("error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", + checkfid, data->currfid, + checkvid, data->currvid); + } + + mutex_lock(&fidvid_mutex); + + powernow_k8_acpi_pst_values(data, newstate); + + ret = transition_frequency_fidvid(data, newstate); + + if (ret) { + pr_err("transition frequency failed\n"); + mutex_unlock(&fidvid_mutex); + return 1; + } + mutex_unlock(&fidvid_mutex); + + pol->cur = find_khz_freq_from_fid(data->currfid); + + return 0; +} + +/* Driver entry point to switch to the target frequency */ +static int powernowk8_target(struct cpufreq_policy *pol, unsigned index) +{ + struct powernowk8_target_arg pta = { .pol = pol, .newstate = index }; + + return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); +} + +struct init_on_cpu { + struct powernow_k8_data *data; + int rc; +}; + +static void powernowk8_cpu_init_on_cpu(void *_init_on_cpu) +{ + struct init_on_cpu *init_on_cpu = _init_on_cpu; + + if (pending_bit_stuck()) { + pr_err("failing init, change pending bit set\n"); + init_on_cpu->rc = -ENODEV; + return; + } + + if (query_current_values_with_pending_wait(init_on_cpu->data)) { + init_on_cpu->rc = -ENODEV; + return; + } + + fidvid_msr_init(); + + init_on_cpu->rc = 0; +} + +#define MISSING_PSS_MSG \ + FW_BUG "No compatible ACPI _PSS objects found.\n" \ + FW_BUG "First, make sure Cool'N'Quiet is enabled in the BIOS.\n" \ + FW_BUG "If that doesn't help, try upgrading your BIOS.\n" + +/* per CPU init entry point to the driver */ +static int powernowk8_cpu_init(struct cpufreq_policy *pol) +{ + struct powernow_k8_data *data; + struct init_on_cpu init_on_cpu; + int rc, cpu; + + smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); + if (rc) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + pr_err("unable to alloc powernow_k8_data"); + return -ENOMEM; + } + + data->cpu = pol->cpu; + + if (powernow_k8_cpu_init_acpi(data)) { + /* + * Use the PSB BIOS structure. This is only available on + * an UP version, and is deprecated by AMD. + */ + if (num_online_cpus() != 1) { + pr_err_once(MISSING_PSS_MSG); + goto err_out; + } + if (pol->cpu != 0) { + pr_err(FW_BUG "No ACPI _PSS objects for CPU other than CPU0. Complain to your BIOS vendor.\n"); + goto err_out; + } + rc = find_psb_table(data); + if (rc) + goto err_out; + + /* Take a crude guess here. + * That guess was in microseconds, so multiply with 1000 */ + pol->cpuinfo.transition_latency = ( + ((data->rvo + 8) * data->vstable * VST_UNITS_20US) + + ((1 << data->irt) * 30)) * 1000; + } else /* ACPI _PSS objects available */ + pol->cpuinfo.transition_latency = get_transition_latency(data); + + /* only run on specific CPU from here on */ + init_on_cpu.data = data; + smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu, + &init_on_cpu, 1); + rc = init_on_cpu.rc; + if (rc != 0) + goto err_out_exit_acpi; + + cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu)); + data->available_cores = pol->cpus; + + /* min/max the cpu is capable of */ + if (cpufreq_table_validate_and_show(pol, data->powernow_table)) { + pr_err(FW_BUG "invalid powernow_table\n"); + powernow_k8_cpu_exit_acpi(data); + kfree(data->powernow_table); + kfree(data); + return -EINVAL; + } + + pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n", + data->currfid, data->currvid); + + /* Point all the CPUs in this policy to the same data */ + for_each_cpu(cpu, pol->cpus) + per_cpu(powernow_data, cpu) = data; + + return 0; + +err_out_exit_acpi: + powernow_k8_cpu_exit_acpi(data); + +err_out: + kfree(data); + return -ENODEV; +} + +static int powernowk8_cpu_exit(struct cpufreq_policy *pol) +{ + struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); + int cpu; + + if (!data) + return -EINVAL; + + powernow_k8_cpu_exit_acpi(data); + + kfree(data->powernow_table); + kfree(data); + for_each_cpu(cpu, pol->cpus) + per_cpu(powernow_data, cpu) = NULL; + + return 0; +} + +static void query_values_on_cpu(void *_err) +{ + int *err = _err; + struct powernow_k8_data *data = __this_cpu_read(powernow_data); + + *err = query_current_values_with_pending_wait(data); +} + +static unsigned int powernowk8_get(unsigned int cpu) +{ + struct powernow_k8_data *data = per_cpu(powernow_data, cpu); + unsigned int khz = 0; + int err; + + if (!data) + return 0; + + smp_call_function_single(cpu, query_values_on_cpu, &err, true); + if (err) + goto out; + + khz = find_khz_freq_from_fid(data->currfid); + + +out: + return khz; +} + +static struct cpufreq_driver cpufreq_amd64_driver = { + .flags = CPUFREQ_ASYNC_NOTIFICATION, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernowk8_target, + .bios_limit = acpi_processor_get_bios_limit, + .init = powernowk8_cpu_init, + .exit = powernowk8_cpu_exit, + .get = powernowk8_get, + .name = "powernow-k8", + .attr = cpufreq_generic_attr, +}; + +static void __request_acpi_cpufreq(void) +{ + const char *cur_drv, *drv = "acpi-cpufreq"; + + cur_drv = cpufreq_get_current_driver(); + if (!cur_drv) + goto request; + + if (strncmp(cur_drv, drv, min_t(size_t, strlen(cur_drv), strlen(drv)))) + pr_warn("WTF driver: %s\n", cur_drv); + + return; + + request: + pr_warn("This CPU is not supported anymore, using acpi-cpufreq instead.\n"); + request_module(drv); +} + +/* driver entry point for init */ +static int powernowk8_init(void) +{ + unsigned int i, supported_cpus = 0; + int ret; + + if (static_cpu_has(X86_FEATURE_HW_PSTATE)) { + __request_acpi_cpufreq(); + return -ENODEV; + } + + if (!x86_match_cpu(powernow_k8_ids)) + return -ENODEV; + + get_online_cpus(); + for_each_online_cpu(i) { + smp_call_function_single(i, check_supported_cpu, &ret, 1); + if (!ret) + supported_cpus++; + } + + if (supported_cpus != num_online_cpus()) { + put_online_cpus(); + return -ENODEV; + } + put_online_cpus(); + + ret = cpufreq_register_driver(&cpufreq_amd64_driver); + if (ret) + return ret; + + pr_info("Found %d %s (%d cpu cores) (" VERSION ")\n", + num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); + + return ret; +} + +/* driver entry point for term */ +static void __exit powernowk8_exit(void) +{ + pr_debug("exit\n"); + + cpufreq_unregister_driver(&cpufreq_amd64_driver); +} + +MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>"); +MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@amd.com>"); +MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); +MODULE_LICENSE("GPL"); + +late_initcall(powernowk8_init); +module_exit(powernowk8_exit); diff --git a/kernel/drivers/cpufreq/powernow-k8.h b/kernel/drivers/cpufreq/powernow-k8.h new file mode 100644 index 000000000..45ce11e86 --- /dev/null +++ b/kernel/drivers/cpufreq/powernow-k8.h @@ -0,0 +1,190 @@ +/* + * (c) 2003-2006 Advanced Micro Devices, Inc. + * Your use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + */ + +struct powernow_k8_data { + unsigned int cpu; + + u32 numps; /* number of p-states */ + u32 batps; /* number of p-states supported on battery */ + + /* these values are constant when the PSB is used to determine + * vid/fid pairings, but are modified during the ->target() call + * when ACPI is used */ + u32 rvo; /* ramp voltage offset */ + u32 irt; /* isochronous relief time */ + u32 vidmvs; /* usable value calculated from mvs */ + u32 vstable; /* voltage stabilization time, units 20 us */ + u32 plllock; /* pll lock time, units 1 us */ + u32 exttype; /* extended interface = 1 */ + + /* keep track of the current fid / vid or pstate */ + u32 currvid; + u32 currfid; + + /* the powernow_table includes all frequency and vid/fid pairings: + * fid are the lower 8 bits of the index, vid are the upper 8 bits. + * frequency is in kHz */ + struct cpufreq_frequency_table *powernow_table; + + /* the acpi table needs to be kept. it's only available if ACPI was + * used to determine valid frequency/vid/fid states */ + struct acpi_processor_performance acpi_data; + + /* we need to keep track of associated cores, but let cpufreq + * handle hotplug events - so just point at cpufreq pol->cpus + * structure */ + struct cpumask *available_cores; +}; + +/* processor's cpuid instruction support */ +#define CPUID_PROCESSOR_SIGNATURE 1 /* function 1 */ +#define CPUID_XFAM 0x0ff00000 /* extended family */ +#define CPUID_XFAM_K8 0 +#define CPUID_XMOD 0x000f0000 /* extended model */ +#define CPUID_XMOD_REV_MASK 0x000c0000 +#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */ +#define CPUID_USE_XFAM_XMOD 0x00000f00 +#define CPUID_GET_MAX_CAPABILITIES 0x80000000 +#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 +#define P_STATE_TRANSITION_CAPABLE 6 + +/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */ +/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */ +/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */ +/* the register number is placed in ecx, and the data is returned in edx:eax. */ + +#define MSR_FIDVID_CTL 0xc0010041 +#define MSR_FIDVID_STATUS 0xc0010042 + +/* Field definitions within the FID VID Low Control MSR : */ +#define MSR_C_LO_INIT_FID_VID 0x00010000 +#define MSR_C_LO_NEW_VID 0x00003f00 +#define MSR_C_LO_NEW_FID 0x0000003f +#define MSR_C_LO_VID_SHIFT 8 + +/* Field definitions within the FID VID High Control MSR : */ +#define MSR_C_HI_STP_GNT_TO 0x000fffff + +/* Field definitions within the FID VID Low Status MSR : */ +#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ +#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 +#define MSR_S_LO_MAX_FID 0x003f0000 +#define MSR_S_LO_START_FID 0x00003f00 +#define MSR_S_LO_CURRENT_FID 0x0000003f + +/* Field definitions within the FID VID High Status MSR : */ +#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 +#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 +#define MSR_S_HI_START_VID 0x00003f00 +#define MSR_S_HI_CURRENT_VID 0x0000003f +#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 + +/* + * There are restrictions frequencies have to follow: + * - only 1 entry in the low fid table ( <=1.4GHz ) + * - lowest entry in the high fid table must be >= 2 * the entry in the + * low fid table + * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry + * in the low fid table + * - the parts can only step at <= 200 MHz intervals, odd fid values are + * supported in revision G and later revisions. + * - lowest frequency must be >= interprocessor hypertransport link speed + * (only applies to MP systems obviously) + */ + +/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */ +#define LO_FID_TABLE_TOP 7 /* fid values marking the boundary */ +#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */ + +#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */ +#define HI_VCOFREQ_TABLE_BOTTOM 1600 + +#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ + +#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ +#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ + +#define MIN_FREQ 800 /* Min and max freqs, per spec */ +#define MAX_FREQ 5000 + +#define INVALID_FID_MASK 0xffffffc0 /* not a valid fid if these bits are set */ +#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ + +#define VID_OFF 0x3f + +#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ + +#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ + +#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ +#define VST_UNITS_20US 20 /* Voltage Stabilization Time is in units of 20us */ + +/* + * Most values of interest are encoded in a single field of the _PSS + * entries: the "control" value. + */ + +#define IRT_SHIFT 30 +#define RVO_SHIFT 28 +#define EXT_TYPE_SHIFT 27 +#define PLL_L_SHIFT 20 +#define MVS_SHIFT 18 +#define VST_SHIFT 11 +#define VID_SHIFT 6 +#define IRT_MASK 3 +#define RVO_MASK 3 +#define EXT_TYPE_MASK 1 +#define PLL_L_MASK 0x7f +#define MVS_MASK 3 +#define VST_MASK 0x7f +#define VID_MASK 0x1f +#define FID_MASK 0x1f +#define EXT_VID_MASK 0x3f +#define EXT_FID_MASK 0x3f + + +/* + * Version 1.4 of the PSB table. This table is constructed by BIOS and is + * to tell the OS's power management driver which VIDs and FIDs are + * supported by this particular processor. + * If the data in the PSB / PST is wrong, then this driver will program the + * wrong values into hardware, which is very likely to lead to a crash. + */ + +#define PSB_ID_STRING "AMDK7PNOW!" +#define PSB_ID_STRING_LEN 10 + +#define PSB_VERSION_1_4 0x14 + +struct psb_s { + u8 signature[10]; + u8 tableversion; + u8 flags1; + u16 vstable; + u8 flags2; + u8 num_tables; + u32 cpuid; + u8 plllocktime; + u8 maxfid; + u8 maxvid; + u8 numps; +}; + +/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */ +struct pst_s { + u8 fid; + u8 vid; +}; + +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid, u32 regfid); +static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); +static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); + +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); + +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); diff --git a/kernel/drivers/cpufreq/powernv-cpufreq.c b/kernel/drivers/cpufreq/powernv-cpufreq.c new file mode 100644 index 000000000..ebef0d827 --- /dev/null +++ b/kernel/drivers/cpufreq/powernv-cpufreq.c @@ -0,0 +1,445 @@ +/* + * POWERNV cpufreq driver for the IBM POWER processors + * + * (C) Copyright IBM 2014 + * + * Author: Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#define pr_fmt(fmt) "powernv-cpufreq: " fmt + +#include <linux/kernel.h> +#include <linux/sysfs.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/cpufreq.h> +#include <linux/smp.h> +#include <linux/of.h> +#include <linux/reboot.h> + +#include <asm/cputhreads.h> +#include <asm/firmware.h> +#include <asm/reg.h> +#include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */ + +#define POWERNV_MAX_PSTATES 256 +#define PMSR_PSAFE_ENABLE (1UL << 30) +#define PMSR_SPR_EM_DISABLE (1UL << 31) +#define PMSR_MAX(x) ((x >> 32) & 0xFF) +#define PMSR_LP(x) ((x >> 48) & 0xFF) + +static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1]; +static bool rebooting, throttled; + +/* + * Note: The set of pstates consists of contiguous integers, the + * smallest of which is indicated by powernv_pstate_info.min, the + * largest of which is indicated by powernv_pstate_info.max. + * + * The nominal pstate is the highest non-turbo pstate in this + * platform. This is indicated by powernv_pstate_info.nominal. + */ +static struct powernv_pstate_info { + int min; + int max; + int nominal; + int nr_pstates; +} powernv_pstate_info; + +/* + * Initialize the freq table based on data obtained + * from the firmware passed via device-tree + */ +static int init_powernv_pstates(void) +{ + struct device_node *power_mgt; + int i, pstate_min, pstate_max, pstate_nominal, nr_pstates = 0; + const __be32 *pstate_ids, *pstate_freqs; + u32 len_ids, len_freqs; + + power_mgt = of_find_node_by_path("/ibm,opal/power-mgt"); + if (!power_mgt) { + pr_warn("power-mgt node not found\n"); + return -ENODEV; + } + + if (of_property_read_u32(power_mgt, "ibm,pstate-min", &pstate_min)) { + pr_warn("ibm,pstate-min node not found\n"); + return -ENODEV; + } + + if (of_property_read_u32(power_mgt, "ibm,pstate-max", &pstate_max)) { + pr_warn("ibm,pstate-max node not found\n"); + return -ENODEV; + } + + if (of_property_read_u32(power_mgt, "ibm,pstate-nominal", + &pstate_nominal)) { + pr_warn("ibm,pstate-nominal not found\n"); + return -ENODEV; + } + pr_info("cpufreq pstate min %d nominal %d max %d\n", pstate_min, + pstate_nominal, pstate_max); + + pstate_ids = of_get_property(power_mgt, "ibm,pstate-ids", &len_ids); + if (!pstate_ids) { + pr_warn("ibm,pstate-ids not found\n"); + return -ENODEV; + } + + pstate_freqs = of_get_property(power_mgt, "ibm,pstate-frequencies-mhz", + &len_freqs); + if (!pstate_freqs) { + pr_warn("ibm,pstate-frequencies-mhz not found\n"); + return -ENODEV; + } + + if (len_ids != len_freqs) { + pr_warn("Entries in ibm,pstate-ids and " + "ibm,pstate-frequencies-mhz does not match\n"); + } + + nr_pstates = min(len_ids, len_freqs) / sizeof(u32); + if (!nr_pstates) { + pr_warn("No PStates found\n"); + return -ENODEV; + } + + pr_debug("NR PStates %d\n", nr_pstates); + for (i = 0; i < nr_pstates; i++) { + u32 id = be32_to_cpu(pstate_ids[i]); + u32 freq = be32_to_cpu(pstate_freqs[i]); + + pr_debug("PState id %d freq %d MHz\n", id, freq); + powernv_freqs[i].frequency = freq * 1000; /* kHz */ + powernv_freqs[i].driver_data = id; + } + /* End of list marker entry */ + powernv_freqs[i].frequency = CPUFREQ_TABLE_END; + + powernv_pstate_info.min = pstate_min; + powernv_pstate_info.max = pstate_max; + powernv_pstate_info.nominal = pstate_nominal; + powernv_pstate_info.nr_pstates = nr_pstates; + + return 0; +} + +/* Returns the CPU frequency corresponding to the pstate_id. */ +static unsigned int pstate_id_to_freq(int pstate_id) +{ + int i; + + i = powernv_pstate_info.max - pstate_id; + if (i >= powernv_pstate_info.nr_pstates || i < 0) { + pr_warn("PState id %d outside of PState table, " + "reporting nominal id %d instead\n", + pstate_id, powernv_pstate_info.nominal); + i = powernv_pstate_info.max - powernv_pstate_info.nominal; + } + + return powernv_freqs[i].frequency; +} + +/* + * cpuinfo_nominal_freq_show - Show the nominal CPU frequency as indicated by + * the firmware + */ +static ssize_t cpuinfo_nominal_freq_show(struct cpufreq_policy *policy, + char *buf) +{ + return sprintf(buf, "%u\n", + pstate_id_to_freq(powernv_pstate_info.nominal)); +} + +struct freq_attr cpufreq_freq_attr_cpuinfo_nominal_freq = + __ATTR_RO(cpuinfo_nominal_freq); + +static struct freq_attr *powernv_cpu_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &cpufreq_freq_attr_cpuinfo_nominal_freq, + NULL, +}; + +/* Helper routines */ + +/* Access helpers to power mgt SPR */ + +static inline unsigned long get_pmspr(unsigned long sprn) +{ + switch (sprn) { + case SPRN_PMCR: + return mfspr(SPRN_PMCR); + + case SPRN_PMICR: + return mfspr(SPRN_PMICR); + + case SPRN_PMSR: + return mfspr(SPRN_PMSR); + } + BUG(); +} + +static inline void set_pmspr(unsigned long sprn, unsigned long val) +{ + switch (sprn) { + case SPRN_PMCR: + mtspr(SPRN_PMCR, val); + return; + + case SPRN_PMICR: + mtspr(SPRN_PMICR, val); + return; + } + BUG(); +} + +/* + * Use objects of this type to query/update + * pstates on a remote CPU via smp_call_function. + */ +struct powernv_smp_call_data { + unsigned int freq; + int pstate_id; +}; + +/* + * powernv_read_cpu_freq: Reads the current frequency on this CPU. + * + * Called via smp_call_function. + * + * Note: The caller of the smp_call_function should pass an argument of + * the type 'struct powernv_smp_call_data *' along with this function. + * + * The current frequency on this CPU will be returned via + * ((struct powernv_smp_call_data *)arg)->freq; + */ +static void powernv_read_cpu_freq(void *arg) +{ + unsigned long pmspr_val; + s8 local_pstate_id; + struct powernv_smp_call_data *freq_data = arg; + + pmspr_val = get_pmspr(SPRN_PMSR); + + /* + * The local pstate id corresponds bits 48..55 in the PMSR. + * Note: Watch out for the sign! + */ + local_pstate_id = (pmspr_val >> 48) & 0xFF; + freq_data->pstate_id = local_pstate_id; + freq_data->freq = pstate_id_to_freq(freq_data->pstate_id); + + pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n", + raw_smp_processor_id(), pmspr_val, freq_data->pstate_id, + freq_data->freq); +} + +/* + * powernv_cpufreq_get: Returns the CPU frequency as reported by the + * firmware for CPU 'cpu'. This value is reported through the sysfs + * file cpuinfo_cur_freq. + */ +static unsigned int powernv_cpufreq_get(unsigned int cpu) +{ + struct powernv_smp_call_data freq_data; + + smp_call_function_any(cpu_sibling_mask(cpu), powernv_read_cpu_freq, + &freq_data, 1); + + return freq_data.freq; +} + +/* + * set_pstate: Sets the pstate on this CPU. + * + * This is called via an smp_call_function. + * + * The caller must ensure that freq_data is of the type + * (struct powernv_smp_call_data *) and the pstate_id which needs to be set + * on this CPU should be present in freq_data->pstate_id. + */ +static void set_pstate(void *freq_data) +{ + unsigned long val; + unsigned long pstate_ul = + ((struct powernv_smp_call_data *) freq_data)->pstate_id; + + val = get_pmspr(SPRN_PMCR); + val = val & 0x0000FFFFFFFFFFFFULL; + + pstate_ul = pstate_ul & 0xFF; + + /* Set both global(bits 56..63) and local(bits 48..55) PStates */ + val = val | (pstate_ul << 56) | (pstate_ul << 48); + + pr_debug("Setting cpu %d pmcr to %016lX\n", + raw_smp_processor_id(), val); + set_pmspr(SPRN_PMCR, val); +} + +/* + * get_nominal_index: Returns the index corresponding to the nominal + * pstate in the cpufreq table + */ +static inline unsigned int get_nominal_index(void) +{ + return powernv_pstate_info.max - powernv_pstate_info.nominal; +} + +static void powernv_cpufreq_throttle_check(unsigned int cpu) +{ + unsigned long pmsr; + int pmsr_pmax, pmsr_lp; + + pmsr = get_pmspr(SPRN_PMSR); + + /* Check for Pmax Capping */ + pmsr_pmax = (s8)PMSR_MAX(pmsr); + if (pmsr_pmax != powernv_pstate_info.max) { + throttled = true; + pr_info("CPU %d Pmax is reduced to %d\n", cpu, pmsr_pmax); + pr_info("Max allowed Pstate is capped\n"); + } + + /* + * Check for Psafe by reading LocalPstate + * or check if Psafe_mode_active is set in PMSR. + */ + pmsr_lp = (s8)PMSR_LP(pmsr); + if ((pmsr_lp < powernv_pstate_info.min) || + (pmsr & PMSR_PSAFE_ENABLE)) { + throttled = true; + pr_info("Pstate set to safe frequency\n"); + } + + /* Check if SPR_EM_DISABLE is set in PMSR */ + if (pmsr & PMSR_SPR_EM_DISABLE) { + throttled = true; + pr_info("Frequency Control disabled from OS\n"); + } + + if (throttled) { + pr_info("PMSR = %16lx\n", pmsr); + pr_crit("CPU Frequency could be throttled\n"); + } +} + +/* + * powernv_cpufreq_target_index: Sets the frequency corresponding to + * the cpufreq table entry indexed by new_index on the cpus in the + * mask policy->cpus + */ +static int powernv_cpufreq_target_index(struct cpufreq_policy *policy, + unsigned int new_index) +{ + struct powernv_smp_call_data freq_data; + + if (unlikely(rebooting) && new_index != get_nominal_index()) + return 0; + + if (!throttled) + powernv_cpufreq_throttle_check(smp_processor_id()); + + freq_data.pstate_id = powernv_freqs[new_index].driver_data; + + /* + * Use smp_call_function to send IPI and execute the + * mtspr on target CPU. We could do that without IPI + * if current CPU is within policy->cpus (core) + */ + smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1); + + return 0; +} + +static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + int base, i; + + base = cpu_first_thread_sibling(policy->cpu); + + for (i = 0; i < threads_per_core; i++) + cpumask_set_cpu(base + i, policy->cpus); + + return cpufreq_table_validate_and_show(policy, powernv_freqs); +} + +static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb, + unsigned long action, void *unused) +{ + int cpu; + struct cpufreq_policy cpu_policy; + + rebooting = true; + for_each_online_cpu(cpu) { + cpufreq_get_policy(&cpu_policy, cpu); + powernv_cpufreq_target_index(&cpu_policy, get_nominal_index()); + } + + return NOTIFY_DONE; +} + +static struct notifier_block powernv_cpufreq_reboot_nb = { + .notifier_call = powernv_cpufreq_reboot_notifier, +}; + +static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy) +{ + struct powernv_smp_call_data freq_data; + + freq_data.pstate_id = powernv_pstate_info.min; + smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1); +} + +static struct cpufreq_driver powernv_cpufreq_driver = { + .name = "powernv-cpufreq", + .flags = CPUFREQ_CONST_LOOPS, + .init = powernv_cpufreq_cpu_init, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernv_cpufreq_target_index, + .get = powernv_cpufreq_get, + .stop_cpu = powernv_cpufreq_stop_cpu, + .attr = powernv_cpu_freq_attr, +}; + +static int __init powernv_cpufreq_init(void) +{ + int rc = 0; + + /* Don't probe on pseries (guest) platforms */ + if (!firmware_has_feature(FW_FEATURE_OPALv3)) + return -ENODEV; + + /* Discover pstates from device tree and init */ + rc = init_powernv_pstates(); + if (rc) { + pr_info("powernv-cpufreq disabled. System does not support PState control\n"); + return rc; + } + + register_reboot_notifier(&powernv_cpufreq_reboot_nb); + return cpufreq_register_driver(&powernv_cpufreq_driver); +} +module_init(powernv_cpufreq_init); + +static void __exit powernv_cpufreq_exit(void) +{ + unregister_reboot_notifier(&powernv_cpufreq_reboot_nb); + cpufreq_unregister_driver(&powernv_cpufreq_driver); +} +module_exit(powernv_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>"); diff --git a/kernel/drivers/cpufreq/ppc_cbe_cpufreq.c b/kernel/drivers/cpufreq/ppc_cbe_cpufreq.c new file mode 100644 index 000000000..5a4c5a639 --- /dev/null +++ b/kernel/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -0,0 +1,170 @@ +/* + * cpufreq driver for the cell processor + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft <krafft@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/cell-regs.h> + +#include "ppc_cbe_cpufreq.h" + +/* the CBE supports an 8 step frequency scaling */ +static struct cpufreq_frequency_table cbe_freqs[] = { + {0, 1, 0}, + {0, 2, 0}, + {0, 3, 0}, + {0, 4, 0}, + {0, 5, 0}, + {0, 6, 0}, + {0, 8, 0}, + {0, 10, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* + * hardware specific functions + */ + +static int set_pmode(unsigned int cpu, unsigned int slow_mode) +{ + int rc; + + if (cbe_cpufreq_has_pmi) + rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode); + else + rc = cbe_cpufreq_set_pmode(cpu, slow_mode); + + pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu)); + + return rc; +} + +/* + * cpufreq functions + */ + +static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos; + const u32 *max_freqp; + u32 max_freq; + int cur_pmode; + struct device_node *cpu; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if (!cpu) + return -ENODEV; + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + /* + * Let's check we can actually get to the CELL regs + */ + if (!cbe_get_cpu_pmd_regs(policy->cpu) || + !cbe_get_cpu_mic_tm_regs(policy->cpu)) { + pr_info("invalid CBE regs pointers for cpufreq\n"); + return -EINVAL; + } + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + + of_node_put(cpu); + + if (!max_freqp) + return -EINVAL; + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + cpufreq_for_each_entry(pos, cbe_freqs) { + pos->frequency = max_freq / pos->driver_data; + pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency); + } + + /* if DEBUG is enabled set_pmode() measures the latency + * of a transition */ + policy->cpuinfo.transition_latency = 25000; + + cur_pmode = cbe_cpufreq_get_pmode(policy->cpu); + pr_debug("current pmode is at %d\n",cur_pmode); + + policy->cur = cbe_freqs[cur_pmode].frequency; + +#ifdef CONFIG_SMP + cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); +#endif + + /* this ensures that policy->cpuinfo_min + * and policy->cpuinfo_max are set correctly */ + return cpufreq_table_validate_and_show(policy, cbe_freqs); +} + +static int cbe_cpufreq_target(struct cpufreq_policy *policy, + unsigned int cbe_pmode_new) +{ + pr_debug("setting frequency for cpu %d to %d kHz, " \ + "1/%d of max frequency\n", + policy->cpu, + cbe_freqs[cbe_pmode_new].frequency, + cbe_freqs[cbe_pmode_new].driver_data); + + return set_pmode(policy->cpu, cbe_pmode_new); +} + +static struct cpufreq_driver cbe_cpufreq_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cbe_cpufreq_target, + .init = cbe_cpufreq_cpu_init, + .name = "cbe-cpufreq", + .flags = CPUFREQ_CONST_LOOPS, +}; + +/* + * module init and destoy + */ + +static int __init cbe_cpufreq_init(void) +{ + if (!machine_is(cell)) + return -ENODEV; + + return cpufreq_register_driver(&cbe_cpufreq_driver); +} + +static void __exit cbe_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&cbe_cpufreq_driver); +} + +module_init(cbe_cpufreq_init); +module_exit(cbe_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); diff --git a/kernel/drivers/cpufreq/ppc_cbe_cpufreq.h b/kernel/drivers/cpufreq/ppc_cbe_cpufreq.h new file mode 100644 index 000000000..b4c00a5a6 --- /dev/null +++ b/kernel/drivers/cpufreq/ppc_cbe_cpufreq.h @@ -0,0 +1,24 @@ +/* + * ppc_cbe_cpufreq.h + * + * This file contains the definitions used by the cbe_cpufreq driver. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft <krafft@de.ibm.com> + * + */ + +#include <linux/cpufreq.h> +#include <linux/types.h> + +int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode); +int cbe_cpufreq_get_pmode(int cpu); + +int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode); + +#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE) +extern bool cbe_cpufreq_has_pmi; +#else +#define cbe_cpufreq_has_pmi (0) +#endif diff --git a/kernel/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c b/kernel/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c new file mode 100644 index 000000000..84d2f2cf5 --- /dev/null +++ b/kernel/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c @@ -0,0 +1,115 @@ +/* + * pervasive backend for the cbe_cpufreq driver + * + * This driver makes use of the pervasive unit to + * engage the desired frequency. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft <krafft@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <asm/machdep.h> +#include <asm/hw_irq.h> +#include <asm/cell-regs.h> + +#include "ppc_cbe_cpufreq.h" + +/* to write to MIC register */ +static u64 MIC_Slow_Fast_Timer_table[] = { + [0 ... 7] = 0x007fc00000000000ull, +}; + +/* more values for the MIC */ +static u64 MIC_Slow_Next_Timer_table[] = { + 0x0000240000000000ull, + 0x0000268000000000ull, + 0x000029C000000000ull, + 0x00002D0000000000ull, + 0x0000300000000000ull, + 0x0000334000000000ull, + 0x000039C000000000ull, + 0x00003FC000000000ull, +}; + + +int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode) +{ + struct cbe_pmd_regs __iomem *pmd_regs; + struct cbe_mic_tm_regs __iomem *mic_tm_regs; + unsigned long flags; + u64 value; +#ifdef DEBUG + long time; +#endif + + local_irq_save(flags); + + mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu); + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + +#ifdef DEBUG + time = jiffies; +#endif + + out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]); + + out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]); + + value = in_be64(&pmd_regs->pmcr); + /* set bits to zero */ + value &= 0xFFFFFFFFFFFFFFF8ull; + /* set bits to next pmode */ + value |= pmode; + + out_be64(&pmd_regs->pmcr, value); + +#ifdef DEBUG + /* wait until new pmode appears in status register */ + value = in_be64(&pmd_regs->pmsr) & 0x07; + while (value != pmode) { + cpu_relax(); + value = in_be64(&pmd_regs->pmsr) & 0x07; + } + + time = jiffies - time; + time = jiffies_to_msecs(time); + pr_debug("had to wait %lu ms for a transition using " \ + "pervasive unit\n", time); +#endif + local_irq_restore(flags); + + return 0; +} + + +int cbe_cpufreq_get_pmode(int cpu) +{ + int ret; + struct cbe_pmd_regs __iomem *pmd_regs; + + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + ret = in_be64(&pmd_regs->pmsr) & 0x07; + + return ret; +} + diff --git a/kernel/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/kernel/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c new file mode 100644 index 000000000..d29e8da39 --- /dev/null +++ b/kernel/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c @@ -0,0 +1,156 @@ +/* + * pmi backend for the cbe_cpufreq driver + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft <krafft@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/timer.h> +#include <linux/module.h> +#include <linux/of_platform.h> + +#include <asm/processor.h> +#include <asm/prom.h> +#include <asm/pmi.h> +#include <asm/cell-regs.h> + +#ifdef DEBUG +#include <asm/time.h> +#endif + +#include "ppc_cbe_cpufreq.h" + +static u8 pmi_slow_mode_limit[MAX_CBE]; + +bool cbe_cpufreq_has_pmi = false; +EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi); + +/* + * hardware specific functions + */ + +int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode) +{ + int ret; + pmi_message_t pmi_msg; +#ifdef DEBUG + long time; +#endif + pmi_msg.type = PMI_TYPE_FREQ_CHANGE; + pmi_msg.data1 = cbe_cpu_to_node(cpu); + pmi_msg.data2 = pmode; + +#ifdef DEBUG + time = jiffies; +#endif + pmi_send_message(pmi_msg); + +#ifdef DEBUG + time = jiffies - time; + time = jiffies_to_msecs(time); + pr_debug("had to wait %lu ms for a transition using " \ + "PMI\n", time); +#endif + ret = pmi_msg.data2; + pr_debug("PMI returned slow mode %d\n", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi); + + +static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg) +{ + u8 node, slow_mode; + + BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE); + + node = pmi_msg.data1; + slow_mode = pmi_msg.data2; + + pmi_slow_mode_limit[node] = slow_mode; + + pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode); +} + +static int pmi_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct cpufreq_policy *policy = data; + struct cpufreq_frequency_table *cbe_freqs; + u8 node; + + /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE + * and CPUFREQ_NOTIFY policy events?) + */ + if (event == CPUFREQ_START) + return 0; + + cbe_freqs = cpufreq_frequency_get_table(policy->cpu); + node = cbe_cpu_to_node(policy->cpu); + + pr_debug("got notified, event=%lu, node=%u\n", event, node); + + if (pmi_slow_mode_limit[node] != 0) { + pr_debug("limiting node %d to slow mode %d\n", + node, pmi_slow_mode_limit[node]); + + cpufreq_verify_within_limits(policy, 0, + + cbe_freqs[pmi_slow_mode_limit[node]].frequency); + } + + return 0; +} + +static struct notifier_block pmi_notifier_block = { + .notifier_call = pmi_notifier, +}; + +static struct pmi_handler cbe_pmi_handler = { + .type = PMI_TYPE_FREQ_CHANGE, + .handle_pmi_message = cbe_cpufreq_handle_pmi, +}; + + + +static int __init cbe_cpufreq_pmi_init(void) +{ + cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0; + + if (!cbe_cpufreq_has_pmi) + return -ENODEV; + + cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); + + return 0; +} + +static void __exit cbe_cpufreq_pmi_exit(void) +{ + cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); + pmi_unregister_handler(&cbe_pmi_handler); +} + +module_init(cbe_cpufreq_pmi_init); +module_exit(cbe_cpufreq_pmi_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); diff --git a/kernel/drivers/cpufreq/pxa2xx-cpufreq.c b/kernel/drivers/cpufreq/pxa2xx-cpufreq.c new file mode 100644 index 000000000..e24269ab4 --- /dev/null +++ b/kernel/drivers/cpufreq/pxa2xx-cpufreq.c @@ -0,0 +1,452 @@ +/* + * Copyright (C) 2002,2003 Intrinsyc Software + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * History: + * 31-Jul-2002 : Initial version [FB] + * 29-Jan-2003 : added PXA255 support [FB] + * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.) + * + * Note: + * This driver may change the memory bus clock rate, but will not do any + * platform specific access timing changes... for example if you have flash + * memory connected to CS0, you will need to register a platform specific + * notifier which will adjust the memory access strobes to maintain a + * minimum strobe width. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> +#include <linux/io.h> + +#include <mach/pxa2xx-regs.h> +#include <mach/smemc.h> + +#ifdef DEBUG +static unsigned int freq_debug; +module_param(freq_debug, uint, 0); +MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); +#else +#define freq_debug 0 +#endif + +static struct regulator *vcc_core; + +static unsigned int pxa27x_maxfreq; +module_param(pxa27x_maxfreq, uint, 0); +MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" + "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)"); + +typedef struct { + unsigned int khz; + unsigned int membus; + unsigned int cccr; + unsigned int div2; + unsigned int cclkcfg; + int vmin; + int vmax; +} pxa_freqs_t; + +/* Define the refresh period in mSec for the SDRAM and the number of rows */ +#define SDRAM_TREF 64 /* standard 64ms SDRAM */ +static unsigned int sdram_rows; + +#define CCLKCFG_TURBO 0x1 +#define CCLKCFG_FCS 0x2 +#define CCLKCFG_HALFTURBO 0x4 +#define CCLKCFG_FASTBUS 0x8 +#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) +#define MDREFR_DRI_MASK 0xFFF + +#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3) +#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3) + +/* + * PXA255 definitions + */ +/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */ +#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS + +static pxa_freqs_t pxa255_run_freqs[] = +{ + /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ + { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ + {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */ + {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */ + {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */ + {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */ + {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */ +}; + +/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ +static pxa_freqs_t pxa255_turbo_freqs[] = +{ + /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ + { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ + {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */ + {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */ + {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */ + {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */ +}; + +#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) +#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) + +static struct cpufreq_frequency_table + pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1]; +static struct cpufreq_frequency_table + pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1]; + +static unsigned int pxa255_turbo_table; +module_param(pxa255_turbo_table, uint, 0); +MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)"); + +/* + * PXA270 definitions + * + * For the PXA27x: + * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG. + * + * A = 0 => memory controller clock from table 3-7, + * A = 1 => memory controller clock = system bus clock + * Run mode frequency = 13 MHz * L + * Turbo mode frequency = 13 MHz * L * N + * System bus frequency = 13 MHz * L / (B + 1) + * + * In CCCR: + * A = 1 + * L = 16 oscillator to run mode ratio + * 2N = 6 2 * (turbo mode to run mode ratio) + * + * In CCLKCFG: + * B = 1 Fast bus mode + * HT = 0 Half-Turbo mode + * T = 1 Turbo mode + * + * For now, just support some of the combinations in table 3-7 of + * PXA27x Processor Family Developer's Manual to simplify frequency + * change sequences. + */ +#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L) +#define CCLKCFG2(B, HT, T) \ + (CCLKCFG_FCS | \ + ((B) ? CCLKCFG_FASTBUS : 0) | \ + ((HT) ? CCLKCFG_HALFTURBO : 0) | \ + ((T) ? CCLKCFG_TURBO : 0)) + +static pxa_freqs_t pxa27x_freqs[] = { + {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 }, + {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 }, + {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 }, + {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 }, + {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 }, + {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 }, + {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 } +}; + +#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) +static struct cpufreq_frequency_table + pxa27x_freq_table[NUM_PXA27x_FREQS+1]; + +extern unsigned get_clk_frequency_khz(int info); + +#ifdef CONFIG_REGULATOR + +static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) +{ + int ret = 0; + int vmin, vmax; + + if (!cpu_is_pxa27x()) + return 0; + + vmin = pxa_freq->vmin; + vmax = pxa_freq->vmax; + if ((vmin == -1) || (vmax == -1)) + return 0; + + ret = regulator_set_voltage(vcc_core, vmin, vmax); + if (ret) + pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n", + vmin, vmax); + return ret; +} + +static void __init pxa_cpufreq_init_voltages(void) +{ + vcc_core = regulator_get(NULL, "vcc_core"); + if (IS_ERR(vcc_core)) { + pr_info("cpufreq: Didn't find vcc_core regulator\n"); + vcc_core = NULL; + } else { + pr_info("cpufreq: Found vcc_core regulator\n"); + } +} +#else +static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) +{ + return 0; +} + +static void __init pxa_cpufreq_init_voltages(void) { } +#endif + +static void find_freq_tables(struct cpufreq_frequency_table **freq_table, + pxa_freqs_t **pxa_freqs) +{ + if (cpu_is_pxa25x()) { + if (!pxa255_turbo_table) { + *pxa_freqs = pxa255_run_freqs; + *freq_table = pxa255_run_freq_table; + } else { + *pxa_freqs = pxa255_turbo_freqs; + *freq_table = pxa255_turbo_freq_table; + } + } else if (cpu_is_pxa27x()) { + *pxa_freqs = pxa27x_freqs; + *freq_table = pxa27x_freq_table; + } else { + BUG(); + } +} + +static void pxa27x_guess_max_freq(void) +{ + if (!pxa27x_maxfreq) { + pxa27x_maxfreq = 416000; + printk(KERN_INFO "PXA CPU 27x max frequency not defined " + "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", + pxa27x_maxfreq); + } else { + pxa27x_maxfreq *= 1000; + } +} + +static void init_sdram_rows(void) +{ + uint32_t mdcnfg = __raw_readl(MDCNFG); + unsigned int drac2 = 0, drac0 = 0; + + if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3)) + drac2 = MDCNFG_DRAC2(mdcnfg); + + if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1)) + drac0 = MDCNFG_DRAC0(mdcnfg); + + sdram_rows = 1 << (11 + max(drac0, drac2)); +} + +static u32 mdrefr_dri(unsigned int freq) +{ + u32 interval = freq * SDRAM_TREF / sdram_rows; + + return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32; +} + +static unsigned int pxa_cpufreq_get(unsigned int cpu) +{ + return get_clk_frequency_khz(0); +} + +static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx) +{ + struct cpufreq_frequency_table *pxa_freqs_table; + pxa_freqs_t *pxa_freq_settings; + unsigned long flags; + unsigned int new_freq_cpu, new_freq_mem; + unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; + int ret = 0; + + /* Get the current policy */ + find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); + + new_freq_cpu = pxa_freq_settings[idx].khz; + new_freq_mem = pxa_freq_settings[idx].membus; + + if (freq_debug) + pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", + new_freq_cpu / 1000, (pxa_freq_settings[idx].div2) ? + (new_freq_mem / 2000) : (new_freq_mem / 1000)); + + if (vcc_core && new_freq_cpu > policy->cur) { + ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); + if (ret) + return ret; + } + + /* Calculate the next MDREFR. If we're slowing down the SDRAM clock + * we need to preset the smaller DRI before the change. If we're + * speeding up we need to set the larger DRI value after the change. + */ + preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR); + if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) { + preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK); + preset_mdrefr |= mdrefr_dri(new_freq_mem); + } + postset_mdrefr = + (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem); + + /* If we're dividing the memory clock by two for the SDRAM clock, this + * must be set prior to the change. Clearing the divide must be done + * after the change. + */ + if (pxa_freq_settings[idx].div2) { + preset_mdrefr |= MDREFR_DB2_MASK; + postset_mdrefr |= MDREFR_DB2_MASK; + } else { + postset_mdrefr &= ~MDREFR_DB2_MASK; + } + + local_irq_save(flags); + + /* Set new the CCCR and prepare CCLKCFG */ + CCCR = pxa_freq_settings[idx].cccr; + cclkcfg = pxa_freq_settings[idx].cclkcfg; + + asm volatile(" \n\ + ldr r4, [%1] /* load MDREFR */ \n\ + b 2f \n\ + .align 5 \n\ +1: \n\ + str %3, [%1] /* preset the MDREFR */ \n\ + mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\ + str %4, [%1] /* postset the MDREFR */ \n\ + \n\ + b 3f \n\ +2: b 1b \n\ +3: nop \n\ + " + : "=&r" (unused) + : "r" (MDREFR), "r" (cclkcfg), + "r" (preset_mdrefr), "r" (postset_mdrefr) + : "r4", "r5"); + local_irq_restore(flags); + + /* + * Even if voltage setting fails, we don't report it, as the frequency + * change succeeded. The voltage reduction is not a critical failure, + * only power savings will suffer from this. + * + * Note: if the voltage change fails, and a return value is returned, a + * bug is triggered (seems a deadlock). Should anybody find out where, + * the "return 0" should become a "return ret". + */ + if (vcc_core && new_freq_cpu < policy->cur) + ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); + + return 0; +} + +static int pxa_cpufreq_init(struct cpufreq_policy *policy) +{ + int i; + unsigned int freq; + struct cpufreq_frequency_table *pxa255_freq_table; + pxa_freqs_t *pxa255_freqs; + + /* try to guess pxa27x cpu */ + if (cpu_is_pxa27x()) + pxa27x_guess_max_freq(); + + pxa_cpufreq_init_voltages(); + + init_sdram_rows(); + + /* set default policy and cpuinfo */ + policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ + + /* Generate pxa25x the run cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { + pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; + pxa255_run_freq_table[i].driver_data = i; + } + pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; + + /* Generate pxa25x the turbo cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { + pxa255_turbo_freq_table[i].frequency = + pxa255_turbo_freqs[i].khz; + pxa255_turbo_freq_table[i].driver_data = i; + } + pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; + + pxa255_turbo_table = !!pxa255_turbo_table; + + /* Generate the pxa27x cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA27x_FREQS; i++) { + freq = pxa27x_freqs[i].khz; + if (freq > pxa27x_maxfreq) + break; + pxa27x_freq_table[i].frequency = freq; + pxa27x_freq_table[i].driver_data = i; + } + pxa27x_freq_table[i].driver_data = i; + pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; + + /* + * Set the policy's minimum and maximum frequencies from the tables + * just constructed. This sets cpuinfo.mxx_freq, min and max. + */ + if (cpu_is_pxa25x()) { + find_freq_tables(&pxa255_freq_table, &pxa255_freqs); + pr_info("PXA255 cpufreq using %s frequency table\n", + pxa255_turbo_table ? "turbo" : "run"); + + cpufreq_table_validate_and_show(policy, pxa255_freq_table); + } + else if (cpu_is_pxa27x()) { + cpufreq_table_validate_and_show(policy, pxa27x_freq_table); + } + + printk(KERN_INFO "PXA CPU frequency change support initialized\n"); + + return 0; +} + +static struct cpufreq_driver pxa_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pxa_set_target, + .init = pxa_cpufreq_init, + .get = pxa_cpufreq_get, + .name = "PXA2xx", +}; + +static int __init pxa_cpu_init(void) +{ + int ret = -ENODEV; + if (cpu_is_pxa25x() || cpu_is_pxa27x()) + ret = cpufreq_register_driver(&pxa_cpufreq_driver); + return ret; +} + +static void __exit pxa_cpu_exit(void) +{ + cpufreq_unregister_driver(&pxa_cpufreq_driver); +} + + +MODULE_AUTHOR("Intrinsyc Software Inc."); +MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture"); +MODULE_LICENSE("GPL"); +module_init(pxa_cpu_init); +module_exit(pxa_cpu_exit); diff --git a/kernel/drivers/cpufreq/pxa3xx-cpufreq.c b/kernel/drivers/cpufreq/pxa3xx-cpufreq.c new file mode 100644 index 000000000..a01275900 --- /dev/null +++ b/kernel/drivers/cpufreq/pxa3xx-cpufreq.c @@ -0,0 +1,228 @@ +/* + * Copyright (C) 2008 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/io.h> + +#include <mach/generic.h> +#include <mach/pxa3xx-regs.h> + +#define HSS_104M (0) +#define HSS_156M (1) +#define HSS_208M (2) +#define HSS_312M (3) + +#define SMCFS_78M (0) +#define SMCFS_104M (2) +#define SMCFS_208M (5) + +#define SFLFS_104M (0) +#define SFLFS_156M (1) +#define SFLFS_208M (2) +#define SFLFS_312M (3) + +#define XSPCLK_156M (0) +#define XSPCLK_NONE (3) + +#define DMCFS_26M (0) +#define DMCFS_260M (3) + +struct pxa3xx_freq_info { + unsigned int cpufreq_mhz; + unsigned int core_xl : 5; + unsigned int core_xn : 3; + unsigned int hss : 2; + unsigned int dmcfs : 2; + unsigned int smcfs : 3; + unsigned int sflfs : 2; + unsigned int df_clkdiv : 3; + + int vcc_core; /* in mV */ + int vcc_sram; /* in mV */ +}; + +#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \ +{ \ + .cpufreq_mhz = cpufreq, \ + .core_xl = _xl, \ + .core_xn = _xn, \ + .hss = HSS_##_hss##M, \ + .dmcfs = DMCFS_##_dmc##M, \ + .smcfs = SMCFS_##_smc##M, \ + .sflfs = SFLFS_##_sfl##M, \ + .df_clkdiv = _dfi, \ + .vcc_core = vcore, \ + .vcc_sram = vsram, \ +} + +static struct pxa3xx_freq_info pxa300_freqs[] = { + /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ + OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ + OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ + OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ + OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ +}; + +static struct pxa3xx_freq_info pxa320_freqs[] = { + /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ + OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ + OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ + OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ + OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ + OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */ +}; + +static unsigned int pxa3xx_freqs_num; +static struct pxa3xx_freq_info *pxa3xx_freqs; +static struct cpufreq_frequency_table *pxa3xx_freqs_table; + +static int setup_freqs_table(struct cpufreq_policy *policy, + struct pxa3xx_freq_info *freqs, int num) +{ + struct cpufreq_frequency_table *table; + int i; + + table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL); + if (table == NULL) + return -ENOMEM; + + for (i = 0; i < num; i++) { + table[i].driver_data = i; + table[i].frequency = freqs[i].cpufreq_mhz * 1000; + } + table[num].driver_data = i; + table[num].frequency = CPUFREQ_TABLE_END; + + pxa3xx_freqs = freqs; + pxa3xx_freqs_num = num; + pxa3xx_freqs_table = table; + + return cpufreq_table_validate_and_show(policy, table); +} + +static void __update_core_freq(struct pxa3xx_freq_info *info) +{ + uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK; + uint32_t accr = ACCR; + uint32_t xclkcfg; + + accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK); + accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl); + + /* No clock until core PLL is re-locked */ + accr |= ACCR_XSPCLK(XSPCLK_NONE); + + xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2; /* turbo bit */ + + ACCR = accr; + __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg)); + + while ((ACSR & mask) != (accr & mask)) + cpu_relax(); +} + +static void __update_bus_freq(struct pxa3xx_freq_info *info) +{ + uint32_t mask; + uint32_t accr = ACCR; + + mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK | + ACCR_DMCFS_MASK; + + accr &= ~mask; + accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) | + ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs); + + ACCR = accr; + + while ((ACSR & mask) != (accr & mask)) + cpu_relax(); +} + +static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) +{ + return pxa3xx_get_clk_frequency_khz(0); +} + +static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, unsigned int index) +{ + struct pxa3xx_freq_info *next; + unsigned long flags; + + if (policy->cpu != 0) + return -EINVAL; + + next = &pxa3xx_freqs[index]; + + local_irq_save(flags); + __update_core_freq(next); + __update_bus_freq(next); + local_irq_restore(flags); + + return 0; +} + +static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret = -EINVAL; + + /* set default policy and cpuinfo */ + policy->min = policy->cpuinfo.min_freq = 104000; + policy->max = policy->cpuinfo.max_freq = + (cpu_is_pxa320()) ? 806000 : 624000; + policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ + + if (cpu_is_pxa300() || cpu_is_pxa310()) + ret = setup_freqs_table(policy, pxa300_freqs, + ARRAY_SIZE(pxa300_freqs)); + + if (cpu_is_pxa320()) + ret = setup_freqs_table(policy, pxa320_freqs, + ARRAY_SIZE(pxa320_freqs)); + + if (ret) { + pr_err("failed to setup frequency table\n"); + return ret; + } + + pr_info("CPUFREQ support for PXA3xx initialized\n"); + return 0; +} + +static struct cpufreq_driver pxa3xx_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pxa3xx_cpufreq_set, + .init = pxa3xx_cpufreq_init, + .get = pxa3xx_cpufreq_get, + .name = "pxa3xx-cpufreq", +}; + +static int __init cpufreq_init(void) +{ + if (cpu_is_pxa3xx()) + return cpufreq_register_driver(&pxa3xx_cpufreq_driver); + + return 0; +} +module_init(cpufreq_init); + +static void __exit cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pxa3xx_cpufreq_driver); +} +module_exit(cpufreq_exit); + +MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/qoriq-cpufreq.c b/kernel/drivers/cpufreq/qoriq-cpufreq.c new file mode 100644 index 000000000..88b21ae0d --- /dev/null +++ b/kernel/drivers/cpufreq/qoriq-cpufreq.c @@ -0,0 +1,374 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * CPU Frequency Scaling driver for Freescale QorIQ SoCs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/smp.h> + +#if !defined(CONFIG_ARM) +#include <asm/smp.h> /* for get_hard_smp_processor_id() in UP configs */ +#endif + +/** + * struct cpu_data + * @parent: the parent node of cpu clock + * @table: frequency table + */ +struct cpu_data { + struct device_node *parent; + struct cpufreq_frequency_table *table; +}; + +/** + * struct soc_data - SoC specific data + * @freq_mask: mask the disallowed frequencies + * @flag: unique flags + */ +struct soc_data { + u32 freq_mask[4]; + u32 flag; +}; + +#define FREQ_MASK 1 +/* see hardware specification for the allowed frqeuencies */ +static const struct soc_data sdata[] = { + { /* used by p2041 and p3041 */ + .freq_mask = {0x8, 0x8, 0x2, 0x2}, + .flag = FREQ_MASK, + }, + { /* used by p5020 */ + .freq_mask = {0x8, 0x2}, + .flag = FREQ_MASK, + }, + { /* used by p4080, p5040 */ + .freq_mask = {0}, + .flag = 0, + }, +}; + +/* + * the minimum allowed core frequency, in Hz + * for chassis v1.0, >= platform frequency + * for chassis v2.0, >= platform frequency / 2 + */ +static u32 min_cpufreq; +static const u32 *fmask; + +#if defined(CONFIG_ARM) +static int get_cpu_physical_id(int cpu) +{ + return topology_core_id(cpu); +} +#else +static int get_cpu_physical_id(int cpu) +{ + return get_hard_smp_processor_id(cpu); +} +#endif + +static u32 get_bus_freq(void) +{ + struct device_node *soc; + u32 sysfreq; + + soc = of_find_node_by_type(NULL, "soc"); + if (!soc) + return 0; + + if (of_property_read_u32(soc, "bus-frequency", &sysfreq)) + sysfreq = 0; + + of_node_put(soc); + + return sysfreq; +} + +static struct device_node *cpu_to_clk_node(int cpu) +{ + struct device_node *np, *clk_np; + + if (!cpu_present(cpu)) + return NULL; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + return NULL; + + clk_np = of_parse_phandle(np, "clocks", 0); + if (!clk_np) + return NULL; + + of_node_put(np); + + return clk_np; +} + +/* traverse cpu nodes to get cpu mask of sharing clock wire */ +static void set_affected_cpus(struct cpufreq_policy *policy) +{ + struct device_node *np, *clk_np; + struct cpumask *dstp = policy->cpus; + int i; + + np = cpu_to_clk_node(policy->cpu); + if (!np) + return; + + for_each_present_cpu(i) { + clk_np = cpu_to_clk_node(i); + if (!clk_np) + continue; + + if (clk_np == np) + cpumask_set_cpu(i, dstp); + + of_node_put(clk_np); + } + of_node_put(np); +} + +/* reduce the duplicated frequencies in frequency table */ +static void freq_table_redup(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j; + + for (i = 1; i < count; i++) { + for (j = 0; j < i; j++) { + if (freq_table[j].frequency == CPUFREQ_ENTRY_INVALID || + freq_table[j].frequency != + freq_table[i].frequency) + continue; + + freq_table[i].frequency = CPUFREQ_ENTRY_INVALID; + break; + } + } +} + +/* sort the frequencies in frequency table in descenting order */ +static void freq_table_sort(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j, ind; + unsigned int freq, max_freq; + struct cpufreq_frequency_table table; + + for (i = 0; i < count - 1; i++) { + max_freq = freq_table[i].frequency; + ind = i; + for (j = i + 1; j < count; j++) { + freq = freq_table[j].frequency; + if (freq == CPUFREQ_ENTRY_INVALID || + freq <= max_freq) + continue; + ind = j; + max_freq = freq; + } + + if (ind != i) { + /* exchange the frequencies */ + table.driver_data = freq_table[i].driver_data; + table.frequency = freq_table[i].frequency; + freq_table[i].driver_data = freq_table[ind].driver_data; + freq_table[i].frequency = freq_table[ind].frequency; + freq_table[ind].driver_data = table.driver_data; + freq_table[ind].frequency = table.frequency; + } + } +} + +static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct device_node *np; + int i, count, ret; + u32 freq, mask; + struct clk *clk; + struct cpufreq_frequency_table *table; + struct cpu_data *data; + unsigned int cpu = policy->cpu; + u64 u64temp; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + goto err_np; + + policy->clk = of_clk_get(np, 0); + if (IS_ERR(policy->clk)) { + pr_err("%s: no clock information\n", __func__); + goto err_nomem2; + } + + data->parent = of_parse_phandle(np, "clocks", 0); + if (!data->parent) { + pr_err("%s: could not get clock information\n", __func__); + goto err_nomem2; + } + + count = of_property_count_strings(data->parent, "clock-names"); + table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL); + if (!table) { + pr_err("%s: no memory\n", __func__); + goto err_node; + } + + if (fmask) + mask = fmask[get_cpu_physical_id(cpu)]; + else + mask = 0x0; + + for (i = 0; i < count; i++) { + clk = of_clk_get(data->parent, i); + freq = clk_get_rate(clk); + /* + * the clock is valid if its frequency is not masked + * and large than minimum allowed frequency. + */ + if (freq < min_cpufreq || (mask & (1 << i))) + table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + table[i].frequency = freq / 1000; + table[i].driver_data = i; + } + freq_table_redup(table, count); + freq_table_sort(table, count); + table[i].frequency = CPUFREQ_TABLE_END; + + /* set the min and max frequency properly */ + ret = cpufreq_table_validate_and_show(policy, table); + if (ret) { + pr_err("invalid frequency table: %d\n", ret); + goto err_nomem1; + } + + data->table = table; + + /* update ->cpus if we have cluster, no harm if not */ + set_affected_cpus(policy); + policy->driver_data = data; + + /* Minimum transition latency is 12 platform clocks */ + u64temp = 12ULL * NSEC_PER_SEC; + do_div(u64temp, get_bus_freq()); + policy->cpuinfo.transition_latency = u64temp + 1; + + of_node_put(np); + + return 0; + +err_nomem1: + kfree(table); +err_node: + of_node_put(data->parent); +err_nomem2: + policy->driver_data = NULL; + kfree(data); +err_np: + of_node_put(np); + + return -ENODEV; +} + +static int __exit qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct cpu_data *data = policy->driver_data; + + of_node_put(data->parent); + kfree(data->table); + kfree(data); + policy->driver_data = NULL; + + return 0; +} + +static int qoriq_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct clk *parent; + struct cpu_data *data = policy->driver_data; + + parent = of_clk_get(data->parent, data->table[index].driver_data); + return clk_set_parent(policy->clk, parent); +} + +static struct cpufreq_driver qoriq_cpufreq_driver = { + .name = "qoriq_cpufreq", + .flags = CPUFREQ_CONST_LOOPS, + .init = qoriq_cpufreq_cpu_init, + .exit = __exit_p(qoriq_cpufreq_cpu_exit), + .verify = cpufreq_generic_frequency_table_verify, + .target_index = qoriq_cpufreq_target, + .get = cpufreq_generic_get, + .attr = cpufreq_generic_attr, +}; + +static const struct of_device_id node_matches[] __initconst = { + { .compatible = "fsl,p2041-clockgen", .data = &sdata[0], }, + { .compatible = "fsl,p3041-clockgen", .data = &sdata[0], }, + { .compatible = "fsl,p5020-clockgen", .data = &sdata[1], }, + { .compatible = "fsl,p4080-clockgen", .data = &sdata[2], }, + { .compatible = "fsl,p5040-clockgen", .data = &sdata[2], }, + { .compatible = "fsl,qoriq-clockgen-2.0", }, + {} +}; + +static int __init qoriq_cpufreq_init(void) +{ + int ret; + struct device_node *np; + const struct of_device_id *match; + const struct soc_data *data; + + np = of_find_matching_node(NULL, node_matches); + if (!np) + return -ENODEV; + + match = of_match_node(node_matches, np); + data = match->data; + if (data) { + if (data->flag) + fmask = data->freq_mask; + min_cpufreq = get_bus_freq(); + } else { + min_cpufreq = get_bus_freq() / 2; + } + + of_node_put(np); + + ret = cpufreq_register_driver(&qoriq_cpufreq_driver); + if (!ret) + pr_info("Freescale QorIQ CPU frequency scaling driver\n"); + + return ret; +} +module_init(qoriq_cpufreq_init); + +static void __exit qoriq_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&qoriq_cpufreq_driver); +} +module_exit(qoriq_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>"); +MODULE_DESCRIPTION("cpufreq driver for Freescale QorIQ series SoCs"); diff --git a/kernel/drivers/cpufreq/s3c2410-cpufreq.c b/kernel/drivers/cpufreq/s3c2410-cpufreq.c new file mode 100644 index 000000000..b8e5da8e1 --- /dev/null +++ b/kernel/drivers/cpufreq/s3c2410-cpufreq.c @@ -0,0 +1,158 @@ +/* + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/cpu-freq-core.h> + +/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ + +static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + u32 clkdiv = 0; + + if (cfg->divs.h_divisor == 2) + clkdiv |= S3C2410_CLKDIVN_HDIVN; + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2410_CLKDIVN_PDIVN; + + __raw_writel(clkdiv, S3C2410_CLKDIVN); +} + +static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long hclk, fclk, pclk; + unsigned int hdiv, pdiv; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + hclk_max = cfg->max.hclk; + + cfg->freq.armclk = fclk; + + s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", + __func__, fclk, hclk_max); + + hdiv = (fclk > cfg->max.hclk) ? 2 : 1; + hclk = fclk / hdiv; + + if (hclk > cfg->max.hclk) { + s3c_freq_dbg("%s: hclk too big\n", __func__); + return -EINVAL; + } + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + pclk = hclk / pdiv; + + if (pclk > cfg->max.pclk) { + s3c_freq_dbg("%s: pclk too big\n", __func__); + return -EINVAL; + } + + pdiv *= hdiv; + + /* record the result */ + cfg->divs.p_divisor = pdiv; + cfg->divs.h_divisor = hdiv; + + return 0; +} + +static struct s3c_cpufreq_info s3c2410_cpufreq_info = { + .max = { + .fclk = 200000000, + .hclk = 100000000, + .pclk = 50000000, + }, + + /* transition latency is about 5ms worst-case, so + * set 10ms to be sure */ + .latency = 10000000, + + .locktime_m = 150, + .locktime_u = 150, + .locktime_bits = 12, + + .need_pll = 1, + + .name = "s3c2410", + .calc_iotiming = s3c2410_iotiming_calc, + .set_iotiming = s3c2410_iotiming_set, + .get_iotiming = s3c2410_iotiming_get, + + .set_fvco = s3c2410_set_fvco, + .set_refresh = s3c2410_cpufreq_setrefresh, + .set_divs = s3c2410_cpufreq_setdivs, + .calc_divs = s3c2410_cpufreq_calcdivs, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), +}; + +static int s3c2410_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + return s3c_cpufreq_register(&s3c2410_cpufreq_info); +} + +static struct subsys_interface s3c2410_cpufreq_interface = { + .name = "s3c2410_cpufreq", + .subsys = &s3c2410_subsys, + .add_dev = s3c2410_cpufreq_add, +}; + +static int __init s3c2410_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2410_cpufreq_interface); +} +arch_initcall(s3c2410_cpufreq_init); + +static int s3c2410a_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + /* alter the maximum freq settings for S3C2410A. If a board knows + * it only has a maximum of 200, then it should register its own + * limits. */ + + s3c2410_cpufreq_info.max.fclk = 266000000; + s3c2410_cpufreq_info.max.hclk = 133000000; + s3c2410_cpufreq_info.max.pclk = 66500000; + s3c2410_cpufreq_info.name = "s3c2410a"; + + return s3c2410_cpufreq_add(dev, sif); +} + +static struct subsys_interface s3c2410a_cpufreq_interface = { + .name = "s3c2410a_cpufreq", + .subsys = &s3c2410a_subsys, + .add_dev = s3c2410a_cpufreq_add, +}; + +static int __init s3c2410a_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2410a_cpufreq_interface); +} +arch_initcall(s3c2410a_cpufreq_init); diff --git a/kernel/drivers/cpufreq/s3c2412-cpufreq.c b/kernel/drivers/cpufreq/s3c2412-cpufreq.c new file mode 100644 index 000000000..eb262133f --- /dev/null +++ b/kernel/drivers/cpufreq/s3c2412-cpufreq.c @@ -0,0 +1,254 @@ +/* + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2412 CPU Frequency scalling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/regs-clock.h> +#include <mach/s3c2412.h> + +#include <plat/cpu.h> +#include <plat/cpu-freq-core.h> + +/* our clock resources. */ +static struct clk *xtal; +static struct clk *fclk; +static struct clk *hclk; +static struct clk *armclk; + +/* HDIV: 1, 2, 3, 4, 6, 8 */ + +static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned int hdiv, pdiv, armdiv, dvs; + unsigned long hclk, fclk, armclk, armdiv_clk; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + armclk = cfg->freq.armclk; + hclk_max = cfg->max.hclk; + + /* We can't run hclk above armclk as at the best we have to + * have armclk and hclk in dvs mode. */ + + if (hclk_max > armclk) + hclk_max = armclk; + + s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n", + __func__, fclk, armclk, hclk_max); + s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n", + __func__, cfg->freq.fclk, cfg->freq.armclk, + cfg->freq.hclk, cfg->freq.pclk); + + armdiv = fclk / armclk; + + if (armdiv < 1) + armdiv = 1; + if (armdiv > 2) + armdiv = 2; + + cfg->divs.arm_divisor = armdiv; + armdiv_clk = fclk / armdiv; + + hdiv = armdiv_clk / hclk_max; + if (hdiv < 1) + hdiv = 1; + + cfg->freq.hclk = hclk = armdiv_clk / hdiv; + + /* set dvs depending on whether we reached armclk or not. */ + cfg->divs.dvs = dvs = armclk < armdiv_clk; + + /* update the actual armclk we achieved. */ + cfg->freq.armclk = dvs ? hclk : armdiv_clk; + + s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n", + __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs); + + if (hdiv > 4) + goto invalid; + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + + if ((hclk / pdiv) > cfg->max.pclk) + pdiv++; + + cfg->freq.pclk = hclk / pdiv; + + s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); + + if (pdiv > 2) + goto invalid; + + pdiv *= hdiv; + + /* store the result, and then return */ + + cfg->divs.h_divisor = hdiv * armdiv; + cfg->divs.p_divisor = pdiv * armdiv; + + return 0; + +invalid: + return -EINVAL; +} + +static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long clkdiv; + unsigned long olddiv; + + olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); + + /* clear off current clock info */ + + clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN; + clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK; + clkdiv &= ~S3C2412_CLKDIVN_PDIVN; + + if (cfg->divs.arm_divisor == 2) + clkdiv |= S3C2412_CLKDIVN_ARMDIVN; + + clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1); + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2412_CLKDIVN_PDIVN; + + s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); + __raw_writel(clkdiv, S3C2410_CLKDIVN); + + clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); +} + +static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + struct s3c_cpufreq_board *board = cfg->board; + unsigned long refresh; + + s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__, + board->refresh, cfg->freq.hclk); + + /* Reduce both the refresh time (in ns) and the frequency (in MHz) + * by 10 each to ensure that we do not overflow 32 bit numbers. This + * should work for HCLK up to 133MHz and refresh period up to 30usec. + */ + + refresh = (board->refresh / 10); + refresh *= (cfg->freq.hclk / 100); + refresh /= (1 * 1000 * 1000); /* 10^6 */ + + s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh); + __raw_writel(refresh, S3C2412_REFRESH); +} + +/* set the default cpu frequency information, based on an 200MHz part + * as we have no other way of detecting the speed rating in software. + */ + +static struct s3c_cpufreq_info s3c2412_cpufreq_info = { + .max = { + .fclk = 200000000, + .hclk = 100000000, + .pclk = 50000000, + }, + + .latency = 5000000, /* 5ms */ + + .locktime_m = 150, + .locktime_u = 150, + .locktime_bits = 16, + + .name = "s3c2412", + .set_refresh = s3c2412_cpufreq_setrefresh, + .set_divs = s3c2412_cpufreq_setdivs, + .calc_divs = s3c2412_cpufreq_calcdivs, + + .calc_iotiming = s3c2412_iotiming_calc, + .set_iotiming = s3c2412_iotiming_set, + .get_iotiming = s3c2412_iotiming_get, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), +}; + +static int s3c2412_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + unsigned long fclk_rate; + + hclk = clk_get(NULL, "hclk"); + if (IS_ERR(hclk)) { + printk(KERN_ERR "%s: cannot find hclk clock\n", __func__); + return -ENOENT; + } + + fclk = clk_get(NULL, "fclk"); + if (IS_ERR(fclk)) { + printk(KERN_ERR "%s: cannot find fclk clock\n", __func__); + goto err_fclk; + } + + fclk_rate = clk_get_rate(fclk); + if (fclk_rate > 200000000) { + printk(KERN_INFO + "%s: fclk %ld MHz, assuming 266MHz capable part\n", + __func__, fclk_rate / 1000000); + s3c2412_cpufreq_info.max.fclk = 266000000; + s3c2412_cpufreq_info.max.hclk = 133000000; + s3c2412_cpufreq_info.max.pclk = 66000000; + } + + armclk = clk_get(NULL, "armclk"); + if (IS_ERR(armclk)) { + printk(KERN_ERR "%s: cannot find arm clock\n", __func__); + goto err_armclk; + } + + xtal = clk_get(NULL, "xtal"); + if (IS_ERR(xtal)) { + printk(KERN_ERR "%s: cannot find xtal clock\n", __func__); + goto err_xtal; + } + + return s3c_cpufreq_register(&s3c2412_cpufreq_info); + +err_xtal: + clk_put(armclk); +err_armclk: + clk_put(fclk); +err_fclk: + clk_put(hclk); + + return -ENOENT; +} + +static struct subsys_interface s3c2412_cpufreq_interface = { + .name = "s3c2412_cpufreq", + .subsys = &s3c2412_subsys, + .add_dev = s3c2412_cpufreq_add, +}; + +static int s3c2412_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2412_cpufreq_interface); +} +arch_initcall(s3c2412_cpufreq_init); diff --git a/kernel/drivers/cpufreq/s3c2416-cpufreq.c b/kernel/drivers/cpufreq/s3c2416-cpufreq.c new file mode 100644 index 000000000..d6d425773 --- /dev/null +++ b/kernel/drivers/cpufreq/s3c2416-cpufreq.c @@ -0,0 +1,491 @@ +/* + * S3C2416/2450 CPUfreq Support + * + * Copyright 2011 Heiko Stuebner <heiko@sntech.de> + * + * based on s3c64xx_cpufreq.c + * + * Copyright 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> +#include <linux/reboot.h> +#include <linux/module.h> + +static DEFINE_MUTEX(cpufreq_lock); + +struct s3c2416_data { + struct clk *armdiv; + struct clk *armclk; + struct clk *hclk; + + unsigned long regulator_latency; +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + struct regulator *vddarm; +#endif + + struct cpufreq_frequency_table *freq_table; + + bool is_dvs; + bool disable_dvs; +}; + +static struct s3c2416_data s3c2416_cpufreq; + +struct s3c2416_dvfs { + unsigned int vddarm_min; + unsigned int vddarm_max; +}; + +/* pseudo-frequency for dvs mode */ +#define FREQ_DVS 132333 + +/* frequency to sleep and reboot in + * it's essential to leave dvs, as some boards do not reconfigure the + * regulator on reboot + */ +#define FREQ_SLEEP 133333 + +/* Sources for the ARMCLK */ +#define SOURCE_HCLK 0 +#define SOURCE_ARMDIV 1 + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE +/* S3C2416 only supports changing the voltage in the dvs-mode. + * Voltages down to 1.0V seem to work, so we take what the regulator + * can get us. + */ +static struct s3c2416_dvfs s3c2416_dvfs_table[] = { + [SOURCE_HCLK] = { 950000, 1250000 }, + [SOURCE_ARMDIV] = { 1250000, 1350000 }, +}; +#endif + +static struct cpufreq_frequency_table s3c2416_freq_table[] = { + { 0, SOURCE_HCLK, FREQ_DVS }, + { 0, SOURCE_ARMDIV, 133333 }, + { 0, SOURCE_ARMDIV, 266666 }, + { 0, SOURCE_ARMDIV, 400000 }, + { 0, 0, CPUFREQ_TABLE_END }, +}; + +static struct cpufreq_frequency_table s3c2450_freq_table[] = { + { 0, SOURCE_HCLK, FREQ_DVS }, + { 0, SOURCE_ARMDIV, 133500 }, + { 0, SOURCE_ARMDIV, 267000 }, + { 0, SOURCE_ARMDIV, 534000 }, + { 0, 0, CPUFREQ_TABLE_END }, +}; + +static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu) +{ + struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; + + if (cpu != 0) + return 0; + + /* return our pseudo-frequency when in dvs mode */ + if (s3c_freq->is_dvs) + return FREQ_DVS; + + return clk_get_rate(s3c_freq->armclk) / 1000; +} + +static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq, + unsigned int freq) +{ + int ret; + + if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) { + ret = clk_set_rate(s3c_freq->armdiv, freq * 1000); + if (ret < 0) { + pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n", + freq, ret); + return ret; + } + } + + return 0; +} + +static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx) +{ +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + struct s3c2416_dvfs *dvfs; +#endif + int ret; + + if (s3c_freq->is_dvs) { + pr_debug("cpufreq: already in dvs mode, nothing to do\n"); + return 0; + } + + pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n", + clk_get_rate(s3c_freq->hclk) / 1000); + ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk); + if (ret < 0) { + pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret); + return ret; + } + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + /* changing the core voltage is only allowed when in dvs mode */ + if (s3c_freq->vddarm) { + dvfs = &s3c2416_dvfs_table[idx]; + + pr_debug("cpufreq: setting regulator to %d-%d\n", + dvfs->vddarm_min, dvfs->vddarm_max); + ret = regulator_set_voltage(s3c_freq->vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + + /* when lowering the voltage failed, there is nothing to do */ + if (ret != 0) + pr_err("cpufreq: Failed to set VDDARM: %d\n", ret); + } +#endif + + s3c_freq->is_dvs = 1; + + return 0; +} + +static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx) +{ +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + struct s3c2416_dvfs *dvfs; +#endif + int ret; + + if (!s3c_freq->is_dvs) { + pr_debug("cpufreq: not in dvs mode, so can't leave\n"); + return 0; + } + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + if (s3c_freq->vddarm) { + dvfs = &s3c2416_dvfs_table[idx]; + + pr_debug("cpufreq: setting regulator to %d-%d\n", + dvfs->vddarm_min, dvfs->vddarm_max); + ret = regulator_set_voltage(s3c_freq->vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("cpufreq: Failed to set VDDARM: %d\n", ret); + return ret; + } + } +#endif + + /* force armdiv to hclk frequency for transition from dvs*/ + if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) { + pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n", + clk_get_rate(s3c_freq->hclk) / 1000); + ret = s3c2416_cpufreq_set_armdiv(s3c_freq, + clk_get_rate(s3c_freq->hclk) / 1000); + if (ret < 0) { + pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n", + clk_get_rate(s3c_freq->hclk) / 1000, ret); + return ret; + } + } + + pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n", + clk_get_rate(s3c_freq->armdiv) / 1000); + + ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv); + if (ret < 0) { + pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n", + ret); + return ret; + } + + s3c_freq->is_dvs = 0; + + return 0; +} + +static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; + unsigned int new_freq; + int idx, ret, to_dvs = 0; + + mutex_lock(&cpufreq_lock); + + idx = s3c_freq->freq_table[index].driver_data; + + if (idx == SOURCE_HCLK) + to_dvs = 1; + + /* switching to dvs when it's not allowed */ + if (to_dvs && s3c_freq->disable_dvs) { + pr_debug("cpufreq: entering dvs mode not allowed\n"); + ret = -EINVAL; + goto out; + } + + /* When leavin dvs mode, always switch the armdiv to the hclk rate + * The S3C2416 has stability issues when switching directly to + * higher frequencies. + */ + new_freq = (s3c_freq->is_dvs && !to_dvs) + ? clk_get_rate(s3c_freq->hclk) / 1000 + : s3c_freq->freq_table[index].frequency; + + if (to_dvs) { + pr_debug("cpufreq: enter dvs\n"); + ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx); + } else if (s3c_freq->is_dvs) { + pr_debug("cpufreq: leave dvs\n"); + ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx); + } else { + pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq); + ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq); + } + +out: + mutex_unlock(&cpufreq_lock); + + return ret; +} + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE +static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq) +{ + int count, v, i, found; + struct cpufreq_frequency_table *pos; + struct s3c2416_dvfs *dvfs; + + count = regulator_count_voltages(s3c_freq->vddarm); + if (count < 0) { + pr_err("cpufreq: Unable to check supported voltages\n"); + return; + } + + if (!count) + goto out; + + cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) { + dvfs = &s3c2416_dvfs_table[pos->driver_data]; + found = 0; + + /* Check only the min-voltage, more is always ok on S3C2416 */ + for (i = 0; i < count; i++) { + v = regulator_list_voltage(s3c_freq->vddarm, i); + if (v >= dvfs->vddarm_min) + found = 1; + } + + if (!found) { + pr_debug("cpufreq: %dkHz unsupported by regulator\n", + pos->frequency); + pos->frequency = CPUFREQ_ENTRY_INVALID; + } + } + +out: + /* Guessed */ + s3c_freq->regulator_latency = 1 * 1000 * 1000; +} +#endif + +static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; + int ret; + + mutex_lock(&cpufreq_lock); + + /* disable further changes */ + s3c_freq->disable_dvs = 1; + + mutex_unlock(&cpufreq_lock); + + /* some boards don't reconfigure the regulator on reboot, which + * could lead to undervolting the cpu when the clock is reset. + * Therefore we always leave the DVS mode on reboot. + */ + if (s3c_freq->is_dvs) { + pr_debug("cpufreq: leave dvs on reboot\n"); + ret = cpufreq_driver_target(cpufreq_cpu_get(0), FREQ_SLEEP, 0); + if (ret < 0) + return NOTIFY_BAD; + } + + return NOTIFY_DONE; +} + +static struct notifier_block s3c2416_cpufreq_reboot_notifier = { + .notifier_call = s3c2416_cpufreq_reboot_notifier_evt, +}; + +static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; + struct cpufreq_frequency_table *pos; + struct clk *msysclk; + unsigned long rate; + int ret; + + if (policy->cpu != 0) + return -EINVAL; + + msysclk = clk_get(NULL, "msysclk"); + if (IS_ERR(msysclk)) { + ret = PTR_ERR(msysclk); + pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret); + return ret; + } + + /* + * S3C2416 and S3C2450 share the same processor-ID and also provide no + * other means to distinguish them other than through the rate of + * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz. + */ + rate = clk_get_rate(msysclk); + if (rate == 800 * 1000 * 1000) { + pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n", + rate / 1000); + s3c_freq->freq_table = s3c2416_freq_table; + policy->cpuinfo.max_freq = 400000; + } else if (rate / 1000 == 534000) { + pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n", + rate / 1000); + s3c_freq->freq_table = s3c2450_freq_table; + policy->cpuinfo.max_freq = 534000; + } + + /* not needed anymore */ + clk_put(msysclk); + + if (s3c_freq->freq_table == NULL) { + pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n", + rate / 1000); + return -ENODEV; + } + + s3c_freq->is_dvs = 0; + + s3c_freq->armdiv = clk_get(NULL, "armdiv"); + if (IS_ERR(s3c_freq->armdiv)) { + ret = PTR_ERR(s3c_freq->armdiv); + pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret); + return ret; + } + + s3c_freq->hclk = clk_get(NULL, "hclk"); + if (IS_ERR(s3c_freq->hclk)) { + ret = PTR_ERR(s3c_freq->hclk); + pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret); + goto err_hclk; + } + + /* chech hclk rate, we only support the common 133MHz for now + * hclk could also run at 66MHz, but this not often used + */ + rate = clk_get_rate(s3c_freq->hclk); + if (rate < 133 * 1000 * 1000) { + pr_err("cpufreq: HCLK not at 133MHz\n"); + clk_put(s3c_freq->hclk); + ret = -EINVAL; + goto err_armclk; + } + + s3c_freq->armclk = clk_get(NULL, "armclk"); + if (IS_ERR(s3c_freq->armclk)) { + ret = PTR_ERR(s3c_freq->armclk); + pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret); + goto err_armclk; + } + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + s3c_freq->vddarm = regulator_get(NULL, "vddarm"); + if (IS_ERR(s3c_freq->vddarm)) { + ret = PTR_ERR(s3c_freq->vddarm); + pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); + goto err_vddarm; + } + + s3c2416_cpufreq_cfg_regulator(s3c_freq); +#else + s3c_freq->regulator_latency = 0; +#endif + + cpufreq_for_each_entry(pos, s3c_freq->freq_table) { + /* special handling for dvs mode */ + if (pos->driver_data == 0) { + if (!s3c_freq->hclk) { + pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n", + pos->frequency); + pos->frequency = CPUFREQ_ENTRY_INVALID; + } else { + continue; + } + } + + /* Check for frequencies we can generate */ + rate = clk_round_rate(s3c_freq->armdiv, + pos->frequency * 1000); + rate /= 1000; + if (rate != pos->frequency) { + pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n", + pos->frequency, rate); + pos->frequency = CPUFREQ_ENTRY_INVALID; + } + } + + /* Datasheet says PLL stabalisation time must be at least 300us, + * so but add some fudge. (reference in LOCKCON0 register description) + */ + ret = cpufreq_generic_init(policy, s3c_freq->freq_table, + (500 * 1000) + s3c_freq->regulator_latency); + if (ret) + goto err_freq_table; + + register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier); + + return 0; + +err_freq_table: +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + regulator_put(s3c_freq->vddarm); +err_vddarm: +#endif + clk_put(s3c_freq->armclk); +err_armclk: + clk_put(s3c_freq->hclk); +err_hclk: + clk_put(s3c_freq->armdiv); + + return ret; +} + +static struct cpufreq_driver s3c2416_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s3c2416_cpufreq_set_target, + .get = s3c2416_cpufreq_get_speed, + .init = s3c2416_cpufreq_driver_init, + .name = "s3c2416", + .attr = cpufreq_generic_attr, +}; + +static int __init s3c2416_cpufreq_init(void) +{ + return cpufreq_register_driver(&s3c2416_cpufreq_driver); +} +module_init(s3c2416_cpufreq_init); diff --git a/kernel/drivers/cpufreq/s3c2440-cpufreq.c b/kernel/drivers/cpufreq/s3c2440-cpufreq.c new file mode 100644 index 000000000..0129f5c70 --- /dev/null +++ b/kernel/drivers/cpufreq/s3c2440-cpufreq.c @@ -0,0 +1,307 @@ +/* + * Copyright (c) 2006-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@simtec.co.uk> + * + * S3C2440/S3C2442 CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/cpu-freq-core.h> + +static struct clk *xtal; +static struct clk *fclk; +static struct clk *hclk; +static struct clk *armclk; + +/* HDIV: 1, 2, 3, 4, 6, 8 */ + +static inline int within_khz(unsigned long a, unsigned long b) +{ + long diff = a - b; + + return (diff >= -1000 && diff <= 1000); +} + +/** + * s3c2440_cpufreq_calcdivs - calculate divider settings + * @cfg: The cpu frequency settings. + * + * Calcualte the divider values for the given frequency settings + * specified in @cfg. The values are stored in @cfg for later use + * by the relevant set routine if the request settings can be reached. + */ +static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned int hdiv, pdiv; + unsigned long hclk, fclk, armclk; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + armclk = cfg->freq.armclk; + hclk_max = cfg->max.hclk; + + s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", + __func__, fclk, armclk, hclk_max); + + if (armclk > fclk) { + printk(KERN_WARNING "%s: armclk > fclk\n", __func__); + armclk = fclk; + } + + /* if we are in DVS, we need HCLK to be <= ARMCLK */ + if (armclk < fclk && armclk < hclk_max) + hclk_max = armclk; + + for (hdiv = 1; hdiv < 9; hdiv++) { + if (hdiv == 5 || hdiv == 7) + hdiv++; + + hclk = (fclk / hdiv); + if (hclk <= hclk_max || within_khz(hclk, hclk_max)) + break; + } + + s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); + + if (hdiv > 8) + goto invalid; + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + + if ((hclk / pdiv) > cfg->max.pclk) + pdiv++; + + s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); + + if (pdiv > 2) + goto invalid; + + pdiv *= hdiv; + + /* calculate a valid armclk */ + + if (armclk < hclk) + armclk = hclk; + + /* if we're running armclk lower than fclk, this really means + * that the system should go into dvs mode, which means that + * armclk is connected to hclk. */ + if (armclk < fclk) { + cfg->divs.dvs = 1; + armclk = hclk; + } else + cfg->divs.dvs = 0; + + cfg->freq.armclk = armclk; + + /* store the result, and then return */ + + cfg->divs.h_divisor = hdiv; + cfg->divs.p_divisor = pdiv; + + return 0; + + invalid: + return -EINVAL; +} + +#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ + S3C2440_CAMDIVN_HCLK4_HALF) + +/** + * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings + * @cfg: The cpu frequency settings. + * + * Set the divisors from the settings in @cfg, which where generated + * during the calculation phase by s3c2440_cpufreq_calcdivs(). + */ +static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long clkdiv, camdiv; + + s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__, + cfg->divs.h_divisor, cfg->divs.p_divisor); + + clkdiv = __raw_readl(S3C2410_CLKDIVN); + camdiv = __raw_readl(S3C2440_CAMDIVN); + + clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); + camdiv &= ~CAMDIVN_HCLK_HALF; + + switch (cfg->divs.h_divisor) { + case 1: + clkdiv |= S3C2440_CLKDIVN_HDIVN_1; + break; + + case 2: + clkdiv |= S3C2440_CLKDIVN_HDIVN_2; + break; + + case 6: + camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; + case 3: + clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; + break; + + case 8: + camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; + case 4: + clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; + break; + + default: + BUG(); /* we don't expect to get here. */ + } + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2440_CLKDIVN_PDIVN; + + /* todo - set pclk. */ + + /* Write the divisors first with hclk intentionally halved so that + * when we write clkdiv we will under-frequency instead of over. We + * then make a short delay and remove the hclk halving if necessary. + */ + + __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); + __raw_writel(clkdiv, S3C2410_CLKDIVN); + + ndelay(20); + __raw_writel(camdiv, S3C2440_CAMDIVN); + + clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); +} + +static int run_freq_for(unsigned long max_hclk, unsigned long fclk, + int *divs, + struct cpufreq_frequency_table *table, + size_t table_size) +{ + unsigned long freq; + int index = 0; + int div; + + for (div = *divs; div > 0; div = *divs++) { + freq = fclk / div; + + if (freq > max_hclk && div != 1) + continue; + + freq /= 1000; /* table is in kHz */ + index = s3c_cpufreq_addfreq(table, index, table_size, freq); + if (index < 0) + break; + } + + return index; +} + +static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; + +static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *table, + size_t table_size) +{ + int ret; + + WARN_ON(cfg->info == NULL); + WARN_ON(cfg->board == NULL); + + ret = run_freq_for(cfg->info->max.hclk, + cfg->info->max.fclk, + hclk_divs, + table, table_size); + + s3c_freq_dbg("%s: returning %d\n", __func__, ret); + + return ret; +} + +static struct s3c_cpufreq_info s3c2440_cpufreq_info = { + .max = { + .fclk = 400000000, + .hclk = 133333333, + .pclk = 66666666, + }, + + .locktime_m = 300, + .locktime_u = 300, + .locktime_bits = 16, + + .name = "s3c244x", + .calc_iotiming = s3c2410_iotiming_calc, + .set_iotiming = s3c2410_iotiming_set, + .get_iotiming = s3c2410_iotiming_get, + .set_fvco = s3c2410_set_fvco, + + .set_refresh = s3c2410_cpufreq_setrefresh, + .set_divs = s3c2440_cpufreq_setdivs, + .calc_divs = s3c2440_cpufreq_calcdivs, + .calc_freqtable = s3c2440_cpufreq_calctable, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), +}; + +static int s3c2440_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + xtal = s3c_cpufreq_clk_get(NULL, "xtal"); + hclk = s3c_cpufreq_clk_get(NULL, "hclk"); + fclk = s3c_cpufreq_clk_get(NULL, "fclk"); + armclk = s3c_cpufreq_clk_get(NULL, "armclk"); + + if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { + printk(KERN_ERR "%s: failed to get clocks\n", __func__); + return -ENOENT; + } + + return s3c_cpufreq_register(&s3c2440_cpufreq_info); +} + +static struct subsys_interface s3c2440_cpufreq_interface = { + .name = "s3c2440_cpufreq", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_cpufreq_add, +}; + +static int s3c2440_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2440_cpufreq_interface); +} + +/* arch_initcall adds the clocks we need, so use subsys_initcall. */ +subsys_initcall(s3c2440_cpufreq_init); + +static struct subsys_interface s3c2442_cpufreq_interface = { + .name = "s3c2442_cpufreq", + .subsys = &s3c2442_subsys, + .add_dev = s3c2440_cpufreq_add, +}; + +static int s3c2442_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2442_cpufreq_interface); +} +subsys_initcall(s3c2442_cpufreq_init); diff --git a/kernel/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/kernel/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c new file mode 100644 index 000000000..9b7b4289d --- /dev/null +++ b/kernel/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c @@ -0,0 +1,198 @@ +/* + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX CPU Frequency scaling - debugfs status support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/export.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/err.h> + +#include <plat/cpu-freq-core.h> + +static struct dentry *dbgfs_root; +static struct dentry *dbgfs_file_io; +static struct dentry *dbgfs_file_info; +static struct dentry *dbgfs_file_board; + +#define print_ns(x) ((x) / 10), ((x) % 10) + +static void show_max(struct seq_file *seq, struct s3c_freq *f) +{ + seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n", + f->fclk, f->hclk, f->pclk, f->armclk); +} + +static int board_show(struct seq_file *seq, void *p) +{ + struct s3c_cpufreq_config *cfg; + struct s3c_cpufreq_board *brd; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + brd = cfg->board; + if (!brd) { + seq_printf(seq, "no board definition set?\n"); + return 0; + } + + seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh); + seq_printf(seq, "auto_io=%u\n", brd->auto_io); + seq_printf(seq, "need_io=%u\n", brd->need_io); + + show_max(seq, &brd->max); + + + return 0; +} + +static int fops_board_open(struct inode *inode, struct file *file) +{ + return single_open(file, board_show, NULL); +} + +static const struct file_operations fops_board = { + .open = fops_board_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int info_show(struct seq_file *seq, void *p) +{ + struct s3c_cpufreq_config *cfg; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk); + seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n", + cfg->freq.hclk, print_ns(cfg->freq.hclk_tns)); + seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk); + seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk); + seq_printf(seq, "\n"); + + show_max(seq, &cfg->max); + + seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n", + cfg->divs.h_divisor, cfg->divs.p_divisor, + cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off"); + seq_printf(seq, "\n"); + + seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll); + + return 0; +} + +static int fops_info_open(struct inode *inode, struct file *file) +{ + return single_open(file, info_show, NULL); +} + +static const struct file_operations fops_info = { + .open = fops_info_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int io_show(struct seq_file *seq, void *p) +{ + void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *); + struct s3c_cpufreq_config *cfg; + struct s3c_iotimings *iot; + union s3c_iobank *iob; + int bank; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + show_bank = cfg->info->debug_io_show; + if (!show_bank) { + seq_printf(seq, "no code to show bank timing\n"); + return 0; + } + + iot = s3c_cpufreq_getiotimings(); + if (!iot) { + seq_printf(seq, "no io timings registered\n"); + return 0; + } + + seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns)); + + for (bank = 0; bank < MAX_BANKS; bank++) { + iob = &iot->bank[bank]; + + seq_printf(seq, "bank %d: ", bank); + + if (!iob->io_2410) { + seq_printf(seq, "nothing set\n"); + continue; + } + + show_bank(seq, cfg, iob); + } + + return 0; +} + +static int fops_io_open(struct inode *inode, struct file *file) +{ + return single_open(file, io_show, NULL); +} + +static const struct file_operations fops_io = { + .open = fops_io_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + + +static int __init s3c_freq_debugfs_init(void) +{ + dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); + if (IS_ERR(dbgfs_root)) { + printk(KERN_ERR "%s: error creating debugfs root\n", __func__); + return PTR_ERR(dbgfs_root); + } + + dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, + NULL, &fops_io); + + dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, + NULL, &fops_info); + + dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, + NULL, &fops_board); + + return 0; +} + +late_initcall(s3c_freq_debugfs_init); + diff --git a/kernel/drivers/cpufreq/s3c24xx-cpufreq.c b/kernel/drivers/cpufreq/s3c24xx-cpufreq.c new file mode 100644 index 000000000..733aa5153 --- /dev/null +++ b/kernel/drivers/cpufreq/s3c24xx-cpufreq.c @@ -0,0 +1,674 @@ +/* + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/cpu.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <linux/slab.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/cpu.h> +#include <plat/cpu-freq-core.h> + +#include <mach/regs-clock.h> + +/* note, cpufreq support deals in kHz, no Hz */ + +static struct cpufreq_driver s3c24xx_driver; +static struct s3c_cpufreq_config cpu_cur; +static struct s3c_iotimings s3c24xx_iotiming; +static struct cpufreq_frequency_table *pll_reg; +static unsigned int last_target = ~0; +static unsigned int ftab_size; +static struct cpufreq_frequency_table *ftab; + +static struct clk *_clk_mpll; +static struct clk *_clk_xtal; +static struct clk *clk_fclk; +static struct clk *clk_hclk; +static struct clk *clk_pclk; +static struct clk *clk_arm; + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS +struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) +{ + return &cpu_cur; +} + +struct s3c_iotimings *s3c_cpufreq_getiotimings(void) +{ + return &s3c24xx_iotiming; +} +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS */ + +static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) +{ + unsigned long fclk, pclk, hclk, armclk; + + cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); + cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); + cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); + cfg->freq.armclk = armclk = clk_get_rate(clk_arm); + + cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON); + cfg->pll.frequency = fclk; + + cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); + + cfg->divs.h_divisor = fclk / hclk; + cfg->divs.p_divisor = fclk / pclk; +} + +static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) +{ + unsigned long pll = cfg->pll.frequency; + + cfg->freq.fclk = pll; + cfg->freq.hclk = pll / cfg->divs.h_divisor; + cfg->freq.pclk = pll / cfg->divs.p_divisor; + + /* convert hclk into 10ths of nanoseconds for io calcs */ + cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); +} + +static inline int closer(unsigned int target, unsigned int n, unsigned int c) +{ + int diff_cur = abs(target - c); + int diff_new = abs(target - n); + + return (diff_new < diff_cur); +} + +static void s3c_cpufreq_show(const char *pfx, + struct s3c_cpufreq_config *cfg) +{ + s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", + pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, + cfg->freq.hclk, cfg->divs.h_divisor, + cfg->freq.pclk, cfg->divs.p_divisor); +} + +/* functions to wrapper the driver info calls to do the cpu specific work */ + +static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) +{ + if (cfg->info->set_iotiming) + (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); +} + +static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) +{ + if (cfg->info->calc_iotiming) + return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); + + return 0; +} + +static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_refresh)(cfg); +} + +static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_divs)(cfg); +} + +static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + return (cfg->info->calc_divs)(cfg); +} + +static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) +{ + cfg->mpll = _clk_mpll; + (cfg->info->set_fvco)(cfg); +} + +static inline void s3c_cpufreq_updateclk(struct clk *clk, + unsigned int freq) +{ + clk_set_rate(clk, freq); +} + +static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, + unsigned int target_freq, + struct cpufreq_frequency_table *pll) +{ + struct s3c_cpufreq_freqs freqs; + struct s3c_cpufreq_config cpu_new; + unsigned long flags; + + cpu_new = cpu_cur; /* copy new from current */ + + s3c_cpufreq_show("cur", &cpu_cur); + + /* TODO - check for DMA currently outstanding */ + + cpu_new.pll = pll ? *pll : cpu_cur.pll; + + if (pll) + freqs.pll_changing = 1; + + /* update our frequencies */ + + cpu_new.freq.armclk = target_freq; + cpu_new.freq.fclk = cpu_new.pll.frequency; + + if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { + printk(KERN_ERR "no divisors for %d\n", target_freq); + goto err_notpossible; + } + + s3c_freq_dbg("%s: got divs\n", __func__); + + s3c_cpufreq_calc(&cpu_new); + + s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); + + if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { + if (s3c_cpufreq_calcio(&cpu_new) < 0) { + printk(KERN_ERR "%s: no IO timings\n", __func__); + goto err_notpossible; + } + } + + s3c_cpufreq_show("new", &cpu_new); + + /* setup our cpufreq parameters */ + + freqs.old = cpu_cur.freq; + freqs.new = cpu_new.freq; + + freqs.freqs.old = cpu_cur.freq.armclk / 1000; + freqs.freqs.new = cpu_new.freq.armclk / 1000; + + /* update f/h/p clock settings before we issue the change + * notification, so that drivers do not need to do anything + * special if they want to recalculate on CPUFREQ_PRECHANGE. */ + + s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); + s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); + s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); + s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); + + /* start the frequency change */ + cpufreq_freq_transition_begin(policy, &freqs.freqs); + + /* If hclk is staying the same, then we do not need to + * re-write the IO or the refresh timings whilst we are changing + * speed. */ + + local_irq_save(flags); + + /* is our memory clock slowing down? */ + if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { + s3c_cpufreq_setrefresh(&cpu_new); + s3c_cpufreq_setio(&cpu_new); + } + + if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { + /* not changing PLL, just set the divisors */ + + s3c_cpufreq_setdivs(&cpu_new); + } else { + if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { + /* slow the cpu down, then set divisors */ + + s3c_cpufreq_setfvco(&cpu_new); + s3c_cpufreq_setdivs(&cpu_new); + } else { + /* set the divisors, then speed up */ + + s3c_cpufreq_setdivs(&cpu_new); + s3c_cpufreq_setfvco(&cpu_new); + } + } + + /* did our memory clock speed up */ + if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { + s3c_cpufreq_setrefresh(&cpu_new); + s3c_cpufreq_setio(&cpu_new); + } + + /* update our current settings */ + cpu_cur = cpu_new; + + local_irq_restore(flags); + + /* notify everyone we've done this */ + cpufreq_freq_transition_end(policy, &freqs.freqs, 0); + + s3c_freq_dbg("%s: finished\n", __func__); + return 0; + + err_notpossible: + printk(KERN_ERR "no compatible settings for %d\n", target_freq); + return -EINVAL; +} + +/* s3c_cpufreq_target + * + * called by the cpufreq core to adjust the frequency that the CPU + * is currently running at. + */ + +static int s3c_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_frequency_table *pll; + unsigned int index; + + /* avoid repeated calls which cause a needless amout of duplicated + * logging output (and CPU time as the calculation process is + * done) */ + if (target_freq == last_target) + return 0; + + last_target = target_freq; + + s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", + __func__, policy, target_freq, relation); + + if (ftab) { + if (cpufreq_frequency_table_target(policy, ftab, + target_freq, relation, + &index)) { + s3c_freq_dbg("%s: table failed\n", __func__); + return -EINVAL; + } + + s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, + target_freq, index, ftab[index].frequency); + target_freq = ftab[index].frequency; + } + + target_freq *= 1000; /* convert target to Hz */ + + /* find the settings for our new frequency */ + + if (!pll_reg || cpu_cur.lock_pll) { + /* either we've not got any PLL values, or we've locked + * to the current one. */ + pll = NULL; + } else { + struct cpufreq_policy tmp_policy; + int ret; + + /* we keep the cpu pll table in Hz, to ensure we get an + * accurate value for the PLL output. */ + + tmp_policy.min = policy->min * 1000; + tmp_policy.max = policy->max * 1000; + tmp_policy.cpu = policy->cpu; + + /* cpufreq_frequency_table_target uses a pointer to 'index' + * which is the number of the table entry, not the value of + * the table entry's index field. */ + + ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg, + target_freq, relation, + &index); + + if (ret < 0) { + printk(KERN_ERR "%s: no PLL available\n", __func__); + goto err_notpossible; + } + + pll = pll_reg + index; + + s3c_freq_dbg("%s: target %u => %u\n", + __func__, target_freq, pll->frequency); + + target_freq = pll->frequency; + } + + return s3c_cpufreq_settarget(policy, target_freq, pll); + + err_notpossible: + printk(KERN_ERR "no compatible settings for %d\n", target_freq); + return -EINVAL; +} + +struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) +{ + struct clk *clk; + + clk = clk_get(dev, name); + if (IS_ERR(clk)) + printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name); + + return clk; +} + +static int s3c_cpufreq_init(struct cpufreq_policy *policy) +{ + policy->clk = clk_arm; + return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency); +} + +static int __init s3c_cpufreq_initclks(void) +{ + _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); + _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); + clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); + clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); + clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); + clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); + + if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || + IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { + printk(KERN_ERR "%s: could not get clock(s)\n", __func__); + return -ENOENT; + } + + printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__, + clk_get_rate(clk_fclk) / 1000, + clk_get_rate(clk_hclk) / 1000, + clk_get_rate(clk_pclk) / 1000, + clk_get_rate(clk_arm) / 1000); + + return 0; +} + +#ifdef CONFIG_PM +static struct cpufreq_frequency_table suspend_pll; +static unsigned int suspend_freq; + +static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) +{ + suspend_pll.frequency = clk_get_rate(_clk_mpll); + suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); + suspend_freq = clk_get_rate(clk_arm); + + return 0; +} + +static int s3c_cpufreq_resume(struct cpufreq_policy *policy) +{ + int ret; + + s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); + + last_target = ~0; /* invalidate last_target setting */ + + /* whilst we will be called later on, we try and re-set the + * cpu frequencies as soon as possible so that we do not end + * up resuming devices and then immediately having to re-set + * a number of settings once these devices have restarted. + * + * as a note, it is expected devices are not used until they + * have been un-suspended and at that time they should have + * used the updated clock settings. + */ + + ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); + if (ret) { + printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__); + return ret; + } + + return 0; +} +#else +#define s3c_cpufreq_resume NULL +#define s3c_cpufreq_suspend NULL +#endif + +static struct cpufreq_driver s3c24xx_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .target = s3c_cpufreq_target, + .get = cpufreq_generic_get, + .init = s3c_cpufreq_init, + .suspend = s3c_cpufreq_suspend, + .resume = s3c_cpufreq_resume, + .name = "s3c24xx", +}; + + +int s3c_cpufreq_register(struct s3c_cpufreq_info *info) +{ + if (!info || !info->name) { + printk(KERN_ERR "%s: failed to pass valid information\n", + __func__); + return -EINVAL; + } + + printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n", + info->name); + + /* check our driver info has valid data */ + + BUG_ON(info->set_refresh == NULL); + BUG_ON(info->set_divs == NULL); + BUG_ON(info->calc_divs == NULL); + + /* info->set_fvco is optional, depending on whether there + * is a need to set the clock code. */ + + cpu_cur.info = info; + + /* Note, driver registering should probably update locktime */ + + return 0; +} + +int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + struct s3c_cpufreq_board *ours; + + if (!board) { + printk(KERN_INFO "%s: no board data\n", __func__); + return -EINVAL; + } + + /* Copy the board information so that each board can make this + * initdata. */ + + ours = kzalloc(sizeof(*ours), GFP_KERNEL); + if (ours == NULL) { + printk(KERN_ERR "%s: no memory\n", __func__); + return -ENOMEM; + } + + *ours = *board; + cpu_cur.board = ours; + + return 0; +} + +static int __init s3c_cpufreq_auto_io(void) +{ + int ret; + + if (!cpu_cur.info->get_iotiming) { + printk(KERN_ERR "%s: get_iotiming undefined\n", __func__); + return -ENOENT; + } + + printk(KERN_INFO "%s: working out IO settings\n", __func__); + + ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); + if (ret) + printk(KERN_ERR "%s: failed to get timings\n", __func__); + + return ret; +} + +/* if one or is zero, then return the other, otherwise return the min */ +#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) + +/** + * s3c_cpufreq_freq_min - find the minimum settings for the given freq. + * @dst: The destination structure + * @a: One argument. + * @b: The other argument. + * + * Create a minimum of each frequency entry in the 'struct s3c_freq', + * unless the entry is zero when it is ignored and the non-zero argument + * used. + */ +static void s3c_cpufreq_freq_min(struct s3c_freq *dst, + struct s3c_freq *a, struct s3c_freq *b) +{ + dst->fclk = do_min(a->fclk, b->fclk); + dst->hclk = do_min(a->hclk, b->hclk); + dst->pclk = do_min(a->pclk, b->pclk); + dst->armclk = do_min(a->armclk, b->armclk); +} + +static inline u32 calc_locktime(u32 freq, u32 time_us) +{ + u32 result; + + result = freq * time_us; + result = DIV_ROUND_UP(result, 1000 * 1000); + + return result; +} + +static void s3c_cpufreq_update_loctkime(void) +{ + unsigned int bits = cpu_cur.info->locktime_bits; + u32 rate = (u32)clk_get_rate(_clk_xtal); + u32 val; + + if (bits == 0) { + WARN_ON(1); + return; + } + + val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; + val |= calc_locktime(rate, cpu_cur.info->locktime_m); + + printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val); + __raw_writel(val, S3C2410_LOCKTIME); +} + +static int s3c_cpufreq_build_freq(void) +{ + int size, ret; + + if (!cpu_cur.info->calc_freqtable) + return -EINVAL; + + kfree(ftab); + ftab = NULL; + + size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); + size++; + + ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL); + if (!ftab) { + printk(KERN_ERR "%s: no memory for tables\n", __func__); + return -ENOMEM; + } + + ftab_size = size; + + ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); + s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); + + return 0; +} + +static int __init s3c_cpufreq_initcall(void) +{ + int ret = 0; + + if (cpu_cur.info && cpu_cur.board) { + ret = s3c_cpufreq_initclks(); + if (ret) + goto out; + + /* get current settings */ + s3c_cpufreq_getcur(&cpu_cur); + s3c_cpufreq_show("cur", &cpu_cur); + + if (cpu_cur.board->auto_io) { + ret = s3c_cpufreq_auto_io(); + if (ret) { + printk(KERN_ERR "%s: failed to get io timing\n", + __func__); + goto out; + } + } + + if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { + printk(KERN_ERR "%s: no IO support registered\n", + __func__); + ret = -EINVAL; + goto out; + } + + if (!cpu_cur.info->need_pll) + cpu_cur.lock_pll = 1; + + s3c_cpufreq_update_loctkime(); + + s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, + &cpu_cur.info->max); + + if (cpu_cur.info->calc_freqtable) + s3c_cpufreq_build_freq(); + + ret = cpufreq_register_driver(&s3c24xx_driver); + } + + out: + return ret; +} + +late_initcall(s3c_cpufreq_initcall); + +/** + * s3c_plltab_register - register CPU PLL table. + * @plls: The list of PLL entries. + * @plls_no: The size of the PLL entries @plls. + * + * Register the given set of PLLs with the system. + */ +int __init s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no) +{ + struct cpufreq_frequency_table *vals; + unsigned int size; + + size = sizeof(*vals) * (plls_no + 1); + + vals = kzalloc(size, GFP_KERNEL); + if (vals) { + memcpy(vals, plls, size); + pll_reg = vals; + + /* write a terminating entry, we don't store it in the + * table that is stored in the kernel */ + vals += plls_no; + vals->frequency = CPUFREQ_TABLE_END; + + printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no); + } else + printk(KERN_ERR "cpufreq: no memory for PLL tables\n"); + + return vals ? 0 : -ENOMEM; +} diff --git a/kernel/drivers/cpufreq/s3c64xx-cpufreq.c b/kernel/drivers/cpufreq/s3c64xx-cpufreq.c new file mode 100644 index 000000000..176e84cc3 --- /dev/null +++ b/kernel/drivers/cpufreq/s3c64xx-cpufreq.c @@ -0,0 +1,227 @@ +/* + * Copyright 2009 Wolfson Microelectronics plc + * + * S3C64xx CPUfreq Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "cpufreq: " fmt + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> +#include <linux/module.h> + +static struct regulator *vddarm; +static unsigned long regulator_latency; + +#ifdef CONFIG_CPU_S3C6410 +struct s3c64xx_dvfs { + unsigned int vddarm_min; + unsigned int vddarm_max; +}; + +static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { + [0] = { 1000000, 1150000 }, + [1] = { 1050000, 1150000 }, + [2] = { 1100000, 1150000 }, + [3] = { 1200000, 1350000 }, + [4] = { 1300000, 1350000 }, +}; + +static struct cpufreq_frequency_table s3c64xx_freq_table[] = { + { 0, 0, 66000 }, + { 0, 0, 100000 }, + { 0, 0, 133000 }, + { 0, 1, 200000 }, + { 0, 1, 222000 }, + { 0, 1, 266000 }, + { 0, 2, 333000 }, + { 0, 2, 400000 }, + { 0, 2, 532000 }, + { 0, 2, 533000 }, + { 0, 3, 667000 }, + { 0, 4, 800000 }, + { 0, 0, CPUFREQ_TABLE_END }, +}; +#endif + +static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct s3c64xx_dvfs *dvfs; + unsigned int old_freq, new_freq; + int ret; + + old_freq = clk_get_rate(policy->clk) / 1000; + new_freq = s3c64xx_freq_table[index].frequency; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data]; + +#ifdef CONFIG_REGULATOR + if (vddarm && new_freq > old_freq) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("Failed to set VDDARM for %dkHz: %d\n", + new_freq, ret); + return ret; + } + } +#endif + + ret = clk_set_rate(policy->clk, new_freq * 1000); + if (ret < 0) { + pr_err("Failed to set rate %dkHz: %d\n", + new_freq, ret); + return ret; + } + +#ifdef CONFIG_REGULATOR + if (vddarm && new_freq < old_freq) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("Failed to set VDDARM for %dkHz: %d\n", + new_freq, ret); + if (clk_set_rate(policy->clk, old_freq * 1000) < 0) + pr_err("Failed to restore original clock rate\n"); + + return ret; + } + } +#endif + + pr_debug("Set actual frequency %lukHz\n", + clk_get_rate(policy->clk) / 1000); + + return 0; +} + +#ifdef CONFIG_REGULATOR +static void __init s3c64xx_cpufreq_config_regulator(void) +{ + int count, v, i, found; + struct cpufreq_frequency_table *freq; + struct s3c64xx_dvfs *dvfs; + + count = regulator_count_voltages(vddarm); + if (count < 0) { + pr_err("Unable to check supported voltages\n"); + } + + if (!count) + goto out; + + cpufreq_for_each_valid_entry(freq, s3c64xx_freq_table) { + dvfs = &s3c64xx_dvfs_table[freq->driver_data]; + found = 0; + + for (i = 0; i < count; i++) { + v = regulator_list_voltage(vddarm, i); + if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max) + found = 1; + } + + if (!found) { + pr_debug("%dkHz unsupported by regulator\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + } + +out: + /* Guess based on having to do an I2C/SPI write; in future we + * will be able to query the regulator performance here. */ + regulator_latency = 1 * 1000 * 1000; +} +#endif + +static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + int ret; + struct cpufreq_frequency_table *freq; + + if (policy->cpu != 0) + return -EINVAL; + + if (s3c64xx_freq_table == NULL) { + pr_err("No frequency information for this CPU\n"); + return -ENODEV; + } + + policy->clk = clk_get(NULL, "armclk"); + if (IS_ERR(policy->clk)) { + pr_err("Unable to obtain ARMCLK: %ld\n", + PTR_ERR(policy->clk)); + return PTR_ERR(policy->clk); + } + +#ifdef CONFIG_REGULATOR + vddarm = regulator_get(NULL, "vddarm"); + if (IS_ERR(vddarm)) { + ret = PTR_ERR(vddarm); + pr_err("Failed to obtain VDDARM: %d\n", ret); + pr_err("Only frequency scaling available\n"); + vddarm = NULL; + } else { + s3c64xx_cpufreq_config_regulator(); + } +#endif + + cpufreq_for_each_entry(freq, s3c64xx_freq_table) { + unsigned long r; + + /* Check for frequencies we can generate */ + r = clk_round_rate(policy->clk, freq->frequency * 1000); + r /= 1000; + if (r != freq->frequency) { + pr_debug("%dkHz unsupported by clock\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + /* If we have no regulator then assume startup + * frequency is the maximum we can support. */ + if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000) + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + /* Datasheet says PLL stabalisation time (if we were to use + * the PLLs, which we don't currently) is ~300us worst case, + * but add some fudge. + */ + ret = cpufreq_generic_init(policy, s3c64xx_freq_table, + (500 * 1000) + regulator_latency); + if (ret != 0) { + pr_err("Failed to configure frequency table: %d\n", + ret); + regulator_put(vddarm); + clk_put(policy->clk); + } + + return ret; +} + +static struct cpufreq_driver s3c64xx_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s3c64xx_cpufreq_set_target, + .get = cpufreq_generic_get, + .init = s3c64xx_cpufreq_driver_init, + .name = "s3c", +}; + +static int __init s3c64xx_cpufreq_init(void) +{ + return cpufreq_register_driver(&s3c64xx_cpufreq_driver); +} +module_init(s3c64xx_cpufreq_init); diff --git a/kernel/drivers/cpufreq/s5pv210-cpufreq.c b/kernel/drivers/cpufreq/s5pv210-cpufreq.c new file mode 100644 index 000000000..b0dac7d6b --- /dev/null +++ b/kernel/drivers/cpufreq/s5pv210-cpufreq.c @@ -0,0 +1,662 @@ +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * CPU frequency scaling for S5PC110/S5PV210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/cpufreq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/regulator/consumer.h> + +static void __iomem *clk_base; +static void __iomem *dmc_base[2]; + +#define S5P_CLKREG(x) (clk_base + (x)) + +#define S5P_APLL_LOCK S5P_CLKREG(0x00) +#define S5P_APLL_CON S5P_CLKREG(0x100) +#define S5P_CLK_SRC0 S5P_CLKREG(0x200) +#define S5P_CLK_SRC2 S5P_CLKREG(0x208) +#define S5P_CLK_DIV0 S5P_CLKREG(0x300) +#define S5P_CLK_DIV2 S5P_CLKREG(0x308) +#define S5P_CLK_DIV6 S5P_CLKREG(0x318) +#define S5P_CLKDIV_STAT0 S5P_CLKREG(0x1000) +#define S5P_CLKDIV_STAT1 S5P_CLKREG(0x1004) +#define S5P_CLKMUX_STAT0 S5P_CLKREG(0x1100) +#define S5P_CLKMUX_STAT1 S5P_CLKREG(0x1104) + +#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100) + +/* CLKSRC0 */ +#define S5P_CLKSRC0_MUX200_SHIFT (16) +#define S5P_CLKSRC0_MUX200_MASK (0x1 << S5P_CLKSRC0_MUX200_SHIFT) +#define S5P_CLKSRC0_MUX166_MASK (0x1<<20) +#define S5P_CLKSRC0_MUX133_MASK (0x1<<24) + +/* CLKSRC2 */ +#define S5P_CLKSRC2_G3D_SHIFT (0) +#define S5P_CLKSRC2_G3D_MASK (0x3 << S5P_CLKSRC2_G3D_SHIFT) +#define S5P_CLKSRC2_MFC_SHIFT (4) +#define S5P_CLKSRC2_MFC_MASK (0x3 << S5P_CLKSRC2_MFC_SHIFT) + +/* CLKDIV0 */ +#define S5P_CLKDIV0_APLL_SHIFT (0) +#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) +#define S5P_CLKDIV0_A2M_SHIFT (4) +#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) +#define S5P_CLKDIV0_HCLK200_SHIFT (8) +#define S5P_CLKDIV0_HCLK200_MASK (0x7 << S5P_CLKDIV0_HCLK200_SHIFT) +#define S5P_CLKDIV0_PCLK100_SHIFT (12) +#define S5P_CLKDIV0_PCLK100_MASK (0x7 << S5P_CLKDIV0_PCLK100_SHIFT) +#define S5P_CLKDIV0_HCLK166_SHIFT (16) +#define S5P_CLKDIV0_HCLK166_MASK (0xF << S5P_CLKDIV0_HCLK166_SHIFT) +#define S5P_CLKDIV0_PCLK83_SHIFT (20) +#define S5P_CLKDIV0_PCLK83_MASK (0x7 << S5P_CLKDIV0_PCLK83_SHIFT) +#define S5P_CLKDIV0_HCLK133_SHIFT (24) +#define S5P_CLKDIV0_HCLK133_MASK (0xF << S5P_CLKDIV0_HCLK133_SHIFT) +#define S5P_CLKDIV0_PCLK66_SHIFT (28) +#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) + +/* CLKDIV2 */ +#define S5P_CLKDIV2_G3D_SHIFT (0) +#define S5P_CLKDIV2_G3D_MASK (0xF << S5P_CLKDIV2_G3D_SHIFT) +#define S5P_CLKDIV2_MFC_SHIFT (4) +#define S5P_CLKDIV2_MFC_MASK (0xF << S5P_CLKDIV2_MFC_SHIFT) + +/* CLKDIV6 */ +#define S5P_CLKDIV6_ONEDRAM_SHIFT (28) +#define S5P_CLKDIV6_ONEDRAM_MASK (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT) + +static struct clk *dmc0_clk; +static struct clk *dmc1_clk; +static DEFINE_MUTEX(set_freq_lock); + +/* APLL M,P,S values for 1G/800Mhz */ +#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) +#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) + +/* Use 800MHz when entering sleep mode */ +#define SLEEP_FREQ (800 * 1000) + +/* Tracks if cpu freqency can be updated anymore */ +static bool no_cpufreq_access; + +/* + * DRAM configurations to calculate refresh counter for changing + * frequency of memory. + */ +struct dram_conf { + unsigned long freq; /* HZ */ + unsigned long refresh; /* DRAM refresh counter * 1000 */ +}; + +/* DRAM configuration (DMC0 and DMC1) */ +static struct dram_conf s5pv210_dram_conf[2]; + +enum perf_level { + L0, L1, L2, L3, L4, +}; + +enum s5pv210_mem_type { + LPDDR = 0x1, + LPDDR2 = 0x2, + DDR2 = 0x4, +}; + +enum s5pv210_dmc_port { + DMC0 = 0, + DMC1, +}; + +static struct cpufreq_frequency_table s5pv210_freq_table[] = { + {0, L0, 1000*1000}, + {0, L1, 800*1000}, + {0, L2, 400*1000}, + {0, L3, 200*1000}, + {0, L4, 100*1000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static struct regulator *arm_regulator; +static struct regulator *int_regulator; + +struct s5pv210_dvs_conf { + int arm_volt; /* uV */ + int int_volt; /* uV */ +}; + +static const int arm_volt_max = 1350000; +static const int int_volt_max = 1250000; + +static struct s5pv210_dvs_conf dvs_conf[] = { + [L0] = { + .arm_volt = 1250000, + .int_volt = 1100000, + }, + [L1] = { + .arm_volt = 1200000, + .int_volt = 1100000, + }, + [L2] = { + .arm_volt = 1050000, + .int_volt = 1100000, + }, + [L3] = { + .arm_volt = 950000, + .int_volt = 1100000, + }, + [L4] = { + .arm_volt = 950000, + .int_volt = 1000000, + }, +}; + +static u32 clkdiv_val[5][11] = { + /* + * Clock divider value for following + * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, + * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, + * ONEDRAM, MFC, G3D } + */ + + /* L0 : [1000/200/100][166/83][133/66][200/200] */ + {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L1 : [800/200/100][166/83][133/66][200/200] */ + {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L2 : [400/200/100][166/83][133/66][200/200] */ + {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L3 : [200/200/100][166/83][133/66][200/200] */ + {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L4 : [100/100/100][83/83][66/66][100/100] */ + {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, +}; + +/* + * This function set DRAM refresh counter + * accoriding to operating frequency of DRAM + * ch: DMC port number 0 or 1 + * freq: Operating frequency of DRAM(KHz) + */ +static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) +{ + unsigned long tmp, tmp1; + void __iomem *reg = NULL; + + if (ch == DMC0) { + reg = (dmc_base[0] + 0x30); + } else if (ch == DMC1) { + reg = (dmc_base[1] + 0x30); + } else { + printk(KERN_ERR "Cannot find DMC port\n"); + return; + } + + /* Find current DRAM frequency */ + tmp = s5pv210_dram_conf[ch].freq; + + do_div(tmp, freq); + + tmp1 = s5pv210_dram_conf[ch].refresh; + + do_div(tmp1, tmp); + + __raw_writel(tmp1, reg); +} + +static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned long reg; + unsigned int priv_index; + unsigned int pll_changing = 0; + unsigned int bus_speed_changing = 0; + unsigned int old_freq, new_freq; + int arm_volt, int_volt; + int ret = 0; + + mutex_lock(&set_freq_lock); + + if (no_cpufreq_access) { + pr_err("Denied access to %s as it is disabled temporarily\n", + __func__); + ret = -EINVAL; + goto exit; + } + + old_freq = policy->cur; + new_freq = s5pv210_freq_table[index].frequency; + + /* Finding current running level index */ + if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, + old_freq, CPUFREQ_RELATION_H, + &priv_index)) { + ret = -EINVAL; + goto exit; + } + + arm_volt = dvs_conf[index].arm_volt; + int_volt = dvs_conf[index].int_volt; + + if (new_freq > old_freq) { + ret = regulator_set_voltage(arm_regulator, + arm_volt, arm_volt_max); + if (ret) + goto exit; + + ret = regulator_set_voltage(int_regulator, + int_volt, int_volt_max); + if (ret) + goto exit; + } + + /* Check if there need to change PLL */ + if ((index == L0) || (priv_index == L0)) + pll_changing = 1; + + /* Check if there need to change System bus clock */ + if ((index == L4) || (priv_index == L4)) + bus_speed_changing = 1; + + if (bus_speed_changing) { + /* + * Reconfigure DRAM refresh counter value for minimum + * temporary clock while changing divider. + * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 + */ + if (pll_changing) + s5pv210_set_refresh(DMC1, 83000); + else + s5pv210_set_refresh(DMC1, 100000); + + s5pv210_set_refresh(DMC0, 83000); + } + + /* + * APLL should be changed in this level + * APLL -> MPLL(for stable transition) -> APLL + * Some clock source's clock API are not prepared. + * Do not use clock API in below code. + */ + if (pll_changing) { + /* + * 1. Temporary Change divider for MFC and G3D + * SCLKA2M(200/1=200)->(200/4=50)Mhz + */ + reg = __raw_readl(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | + (3 << S5P_CLKDIV2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* + * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX + * (200/4=50)->(667/4=166)Mhz + */ + reg = __raw_readl(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | + (1 << S5P_CLKSRC2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_SRC2); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 3. DMC1 refresh count for 133Mhz if (index == L4) is + * true refresh counter is already programed in upper + * code. 0x287@83Mhz + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 133000); + + /* 4. SCLKAPLL -> SCLKMPLL */ + reg = __raw_readl(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); + __raw_writel(reg, S5P_CLK_SRC0); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + } + + /* Change divider */ + reg = __raw_readl(S5P_CLK_DIV0); + + reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | + S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | + S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | + S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); + + reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | + (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | + (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | + (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | + (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | + (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | + (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | + (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); + + __raw_writel(reg, S5P_CLK_DIV0); + + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & 0xff); + + /* ARM MCS value changed */ + reg = __raw_readl(S5P_ARM_MCS_CON); + reg &= ~0x3; + if (index >= L3) + reg |= 0x3; + else + reg |= 0x1; + + __raw_writel(reg, S5P_ARM_MCS_CON); + + if (pll_changing) { + /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ + __raw_writel(0x2cf, S5P_APLL_LOCK); + + /* + * 6. Turn on APLL + * 6-1. Set PMS values + * 6-2. Wait untile the PLL is locked + */ + if (index == L0) + __raw_writel(APLL_VAL_1000, S5P_APLL_CON); + else + __raw_writel(APLL_VAL_800, S5P_APLL_CON); + + do { + reg = __raw_readl(S5P_APLL_CON); + } while (!(reg & (0x1 << 29))); + + /* + * 7. Change souce clock from SCLKMPLL(667Mhz) + * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX + * (667/4=166)->(200/4=50)Mhz + */ + reg = __raw_readl(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | + (0 << S5P_CLKSRC2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_SRC2); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 8. Change divider for MFC and G3D + * (200/4=50)->(200/1=200)Mhz + */ + reg = __raw_readl(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | + (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* 9. Change MPLL to APLL in MSYS_MUX */ + reg = __raw_readl(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); + __raw_writel(reg, S5P_CLK_SRC0); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + /* + * 10. DMC1 refresh counter + * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c + * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 200000); + } + + /* + * L4 level need to change memory bus speed, hence onedram clock divier + * and memory refresh parameter should be changed + */ + if (bus_speed_changing) { + reg = __raw_readl(S5P_CLK_DIV6); + reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; + reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); + __raw_writel(reg, S5P_CLK_DIV6); + + do { + reg = __raw_readl(S5P_CLKDIV_STAT1); + } while (reg & (1 << 15)); + + /* Reconfigure DRAM refresh counter value */ + if (index != L4) { + /* + * DMC0 : 166Mhz + * DMC1 : 200Mhz + */ + s5pv210_set_refresh(DMC0, 166000); + s5pv210_set_refresh(DMC1, 200000); + } else { + /* + * DMC0 : 83Mhz + * DMC1 : 100Mhz + */ + s5pv210_set_refresh(DMC0, 83000); + s5pv210_set_refresh(DMC1, 100000); + } + } + + if (new_freq < old_freq) { + regulator_set_voltage(int_regulator, + int_volt, int_volt_max); + + regulator_set_voltage(arm_regulator, + arm_volt, arm_volt_max); + } + + printk(KERN_DEBUG "Perf changed[L%d]\n", index); + +exit: + mutex_unlock(&set_freq_lock); + return ret; +} + +static int check_mem_type(void __iomem *dmc_reg) +{ + unsigned long val; + + val = __raw_readl(dmc_reg + 0x4); + val = (val & (0xf << 8)); + + return val >> 8; +} + +static int s5pv210_cpu_init(struct cpufreq_policy *policy) +{ + unsigned long mem_type; + int ret; + + policy->clk = clk_get(NULL, "armclk"); + if (IS_ERR(policy->clk)) + return PTR_ERR(policy->clk); + + dmc0_clk = clk_get(NULL, "sclk_dmc0"); + if (IS_ERR(dmc0_clk)) { + ret = PTR_ERR(dmc0_clk); + goto out_dmc0; + } + + dmc1_clk = clk_get(NULL, "hclk_msys"); + if (IS_ERR(dmc1_clk)) { + ret = PTR_ERR(dmc1_clk); + goto out_dmc1; + } + + if (policy->cpu != 0) { + ret = -EINVAL; + goto out_dmc1; + } + + /* + * check_mem_type : This driver only support LPDDR & LPDDR2. + * other memory type is not supported. + */ + mem_type = check_mem_type(dmc_base[0]); + + if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { + printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); + ret = -EINVAL; + goto out_dmc1; + } + + /* Find current refresh counter and frequency each DMC */ + s5pv210_dram_conf[0].refresh = (__raw_readl(dmc_base[0] + 0x30) * 1000); + s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); + + s5pv210_dram_conf[1].refresh = (__raw_readl(dmc_base[1] + 0x30) * 1000); + s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); + + policy->suspend_freq = SLEEP_FREQ; + return cpufreq_generic_init(policy, s5pv210_freq_table, 40000); + +out_dmc1: + clk_put(dmc0_clk); +out_dmc0: + clk_put(policy->clk); + return ret; +} + +static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + int ret; + + ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0); + if (ret < 0) + return NOTIFY_BAD; + + no_cpufreq_access = true; + return NOTIFY_DONE; +} + +static struct cpufreq_driver s5pv210_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s5pv210_target, + .get = cpufreq_generic_get, + .init = s5pv210_cpu_init, + .name = "s5pv210", +#ifdef CONFIG_PM + .suspend = cpufreq_generic_suspend, + .resume = cpufreq_generic_suspend, /* We need to set SLEEP FREQ again */ +#endif +}; + +static struct notifier_block s5pv210_cpufreq_reboot_notifier = { + .notifier_call = s5pv210_cpufreq_reboot_notifier_event, +}; + +static int s5pv210_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + int id; + + /* + * HACK: This is a temporary workaround to get access to clock + * and DMC controller registers directly and remove static mappings + * and dependencies on platform headers. It is necessary to enable + * S5PV210 multi-platform support and will be removed together with + * this whole driver as soon as S5PV210 gets migrated to use + * cpufreq-dt driver. + */ + np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock"); + if (!np) { + pr_err("%s: failed to find clock controller DT node\n", + __func__); + return -ENODEV; + } + + clk_base = of_iomap(np, 0); + if (!clk_base) { + pr_err("%s: failed to map clock registers\n", __func__); + return -EFAULT; + } + + for_each_compatible_node(np, NULL, "samsung,s5pv210-dmc") { + id = of_alias_get_id(np, "dmc"); + if (id < 0 || id >= ARRAY_SIZE(dmc_base)) { + pr_err("%s: failed to get alias of dmc node '%s'\n", + __func__, np->name); + return id; + } + + dmc_base[id] = of_iomap(np, 0); + if (!dmc_base[id]) { + pr_err("%s: failed to map dmc%d registers\n", + __func__, id); + return -EFAULT; + } + } + + for (id = 0; id < ARRAY_SIZE(dmc_base); ++id) { + if (!dmc_base[id]) { + pr_err("%s: failed to find dmc%d node\n", __func__, id); + return -ENODEV; + } + } + + arm_regulator = regulator_get(NULL, "vddarm"); + if (IS_ERR(arm_regulator)) { + pr_err("failed to get regulator vddarm"); + return PTR_ERR(arm_regulator); + } + + int_regulator = regulator_get(NULL, "vddint"); + if (IS_ERR(int_regulator)) { + pr_err("failed to get regulator vddint"); + regulator_put(arm_regulator); + return PTR_ERR(int_regulator); + } + + register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier); + + return cpufreq_register_driver(&s5pv210_driver); +} + +static struct platform_driver s5pv210_cpufreq_platdrv = { + .driver = { + .name = "s5pv210-cpufreq", + }, + .probe = s5pv210_cpufreq_probe, +}; +module_platform_driver(s5pv210_cpufreq_platdrv); diff --git a/kernel/drivers/cpufreq/sa1100-cpufreq.c b/kernel/drivers/cpufreq/sa1100-cpufreq.c new file mode 100644 index 000000000..728eab77e --- /dev/null +++ b/kernel/drivers/cpufreq/sa1100-cpufreq.c @@ -0,0 +1,220 @@ +/* + * cpu-sa1100.c: clock scaling for the SA1100 + * + * Copyright (C) 2000 2001, The Delft University of Technology + * + * Authors: + * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version + * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): + * - major rewrite for linux-2.3.99 + * - rewritten for the more generic power management scheme in + * linux-2.4.5-rmk1 + * + * This software has been developed while working on the LART + * computing board (http://www.lartmaker.nl/), which is + * sponsored by the Mobile Multi-media Communications + * (http://www.mobimedia.org/) and Ubiquitous Communications + * (http://www.ubicom.tudelft.nl/) projects. + * + * The authors can be reached at: + * + * Erik Mouw + * Information and Communication Theory Group + * Faculty of Information Technology and Systems + * Delft University of Technology + * P.O. Box 5031 + * 2600 GA Delft + * The Netherlands + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * Theory of operations + * ==================== + * + * Clock scaling can be used to lower the power consumption of the CPU + * core. This will give you a somewhat longer running time. + * + * The SA-1100 has a single register to change the core clock speed: + * + * PPCR 0x90020014 PLL config + * + * However, the DRAM timings are closely related to the core clock + * speed, so we need to change these, too. The used registers are: + * + * MDCNFG 0xA0000000 DRAM config + * MDCAS0 0xA0000004 Access waveform + * MDCAS1 0xA0000008 Access waveform + * MDCAS2 0xA000000C Access waveform + * + * Care must be taken to change the DRAM parameters the correct way, + * because otherwise the DRAM becomes unusable and the kernel will + * crash. + * + * The simple solution to avoid a kernel crash is to put the actual + * clock change in ROM and jump to that code from the kernel. The main + * disadvantage is that the ROM has to be modified, which is not + * possible on all SA-1100 platforms. Another disadvantage is that + * jumping to ROM makes clock switching unnecessary complicated. + * + * The idea behind this driver is that the memory configuration can be + * changed while running from DRAM (even with interrupts turned on!) + * as long as all re-configuration steps yield a valid DRAM + * configuration. The advantages are clear: it will run on all SA-1100 + * platforms, and the code is very simple. + * + * If you really want to understand what is going on in + * sa1100_update_dram_timings(), you'll have to read sections 8.2, + * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor + * Developers Manual" (available for free from Intel). + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/io.h> + +#include <asm/cputype.h> + +#include <mach/generic.h> +#include <mach/hardware.h> + +struct sa1100_dram_regs { + int speed; + u32 mdcnfg; + u32 mdcas0; + u32 mdcas1; + u32 mdcas2; +}; + + +static struct cpufreq_driver sa1100_driver; + +static struct sa1100_dram_regs sa1100_dram_settings[] = { + /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */ + { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */ + { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */ + { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */ + {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */ + {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */ + {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */ + {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */ + {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */ + {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */ + {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */ + {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */ + {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */ + {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */ + {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */ + {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */ + {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */ + { 0, 0, 0, 0, 0 } /* last entry */ +}; + +static void sa1100_update_dram_timings(int current_speed, int new_speed) +{ + struct sa1100_dram_regs *settings = sa1100_dram_settings; + + /* find speed */ + while (settings->speed != 0) { + if (new_speed == settings->speed) + break; + + settings++; + } + + if (settings->speed == 0) { + panic("%s: couldn't find dram setting for speed %d\n", + __func__, new_speed); + } + + /* No risk, no fun: run with interrupts on! */ + if (new_speed > current_speed) { + /* We're going FASTER, so first relax the memory + * timings before changing the core frequency + */ + + /* Half the memory access clock */ + MDCNFG |= MDCNFG_CDB2; + + /* The order of these statements IS important, keep 8 + * pulses!! + */ + MDCAS2 = settings->mdcas2; + MDCAS1 = settings->mdcas1; + MDCAS0 = settings->mdcas0; + MDCNFG = settings->mdcnfg; + } else { + /* We're going SLOWER: first decrease the core + * frequency and then tighten the memory settings. + */ + + /* Half the memory access clock */ + MDCNFG |= MDCNFG_CDB2; + + /* The order of these statements IS important, keep 8 + * pulses!! + */ + MDCAS0 = settings->mdcas0; + MDCAS1 = settings->mdcas1; + MDCAS2 = settings->mdcas2; + MDCNFG = settings->mdcnfg; + } +} + +static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr) +{ + unsigned int cur = sa11x0_getspeed(0); + unsigned int new_freq; + + new_freq = sa11x0_freq_table[ppcr].frequency; + + if (new_freq > cur) + sa1100_update_dram_timings(cur, new_freq); + + PPCR = ppcr; + + if (new_freq < cur) + sa1100_update_dram_timings(cur, new_freq); + + return 0; +} + +static int __init sa1100_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL); +} + +static struct cpufreq_driver sa1100_driver __refdata = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sa1100_target, + .get = sa11x0_getspeed, + .init = sa1100_cpu_init, + .name = "sa1100", +}; + +static int __init sa1100_dram_init(void) +{ + if (cpu_is_sa1100()) + return cpufreq_register_driver(&sa1100_driver); + else + return -ENODEV; +} + +arch_initcall(sa1100_dram_init); diff --git a/kernel/drivers/cpufreq/sa1110-cpufreq.c b/kernel/drivers/cpufreq/sa1110-cpufreq.c new file mode 100644 index 000000000..b5befc211 --- /dev/null +++ b/kernel/drivers/cpufreq/sa1110-cpufreq.c @@ -0,0 +1,374 @@ +/* + * linux/arch/arm/mach-sa1100/cpu-sa1110.c + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note: there are two erratas that apply to the SA1110 here: + * 7 - SDRAM auto-power-up failure (rev A0) + * 13 - Corruption of internal register reads/writes following + * SDRAM reads (rev A0, B0, B1) + * + * We ignore rev. A0 and B0 devices; I don't think they're worth supporting. + * + * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type + */ +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include <linux/types.h> + +#include <asm/cputype.h> +#include <asm/mach-types.h> + +#include <mach/generic.h> +#include <mach/hardware.h> + +#undef DEBUG + +struct sdram_params { + const char name[20]; + u_char rows; /* bits */ + u_char cas_latency; /* cycles */ + u_char tck; /* clock cycle time (ns) */ + u_char trcd; /* activate to r/w (ns) */ + u_char trp; /* precharge to activate (ns) */ + u_char twr; /* write recovery time (ns) */ + u_short refresh; /* refresh time for array (us) */ +}; + +struct sdram_info { + u_int mdcnfg; + u_int mdrefr; + u_int mdcas[3]; +}; + +static struct sdram_params sdram_tbl[] __initdata = { + { /* Toshiba TC59SM716 CL2 */ + .name = "TC59SM716-CL2", + .rows = 12, + .tck = 10, + .trcd = 20, + .trp = 20, + .twr = 10, + .refresh = 64000, + .cas_latency = 2, + }, { /* Toshiba TC59SM716 CL3 */ + .name = "TC59SM716-CL3", + .rows = 12, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung K4S641632D TC75 */ + .name = "K4S641632D", + .rows = 14, + .tck = 9, + .trcd = 27, + .trp = 20, + .twr = 9, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung K4S281632B-1H */ + .name = "K4S281632B-1H", + .rows = 12, + .tck = 10, + .trp = 20, + .twr = 10, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung KM416S4030CT */ + .name = "KM416S4030CT", + .rows = 13, + .tck = 8, + .trcd = 24, /* 3 CLKs */ + .trp = 24, /* 3 CLKs */ + .twr = 16, /* Trdl: 2 CLKs */ + .refresh = 64000, + .cas_latency = 3, + }, { /* Winbond W982516AH75L CL3 */ + .name = "W982516AH75L", + .rows = 16, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, { /* Micron MT48LC8M16A2TG-75 */ + .name = "MT48LC8M16A2TG-75", + .rows = 12, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, +}; + +static struct sdram_params sdram_params; + +/* + * Given a period in ns and frequency in khz, calculate the number of + * cycles of frequency in period. Note that we round up to the next + * cycle, even if we are only slightly over. + */ +static inline u_int ns_to_cycles(u_int ns, u_int khz) +{ + return (ns * khz + 999999) / 1000000; +} + +/* + * Create the MDCAS register bit pattern. + */ +static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd) +{ + u_int shift; + + rcd = 2 * rcd - 1; + shift = delayed + 1 + rcd; + + mdcas[0] = (1 << rcd) - 1; + mdcas[0] |= 0x55555555 << shift; + mdcas[1] = mdcas[2] = 0x55555555 << (shift & 1); +} + +static void +sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz, + struct sdram_params *sdram) +{ + u_int mem_khz, sd_khz, trp, twr; + + mem_khz = cpu_khz / 2; + sd_khz = mem_khz; + + /* + * If SDCLK would invalidate the SDRAM timings, + * run SDCLK at half speed. + * + * CPU steppings prior to B2 must either run the memory at + * half speed or use delayed read latching (errata 13). + */ + if ((ns_to_cycles(sdram->tck, sd_khz) > 1) || + (CPU_REVISION < CPU_SA1110_B2 && sd_khz < 62000)) + sd_khz /= 2; + + sd->mdcnfg = MDCNFG & 0x007f007f; + + twr = ns_to_cycles(sdram->twr, mem_khz); + + /* trp should always be >1 */ + trp = ns_to_cycles(sdram->trp, mem_khz) - 1; + if (trp < 1) + trp = 1; + + sd->mdcnfg |= trp << 8; + sd->mdcnfg |= trp << 24; + sd->mdcnfg |= sdram->cas_latency << 12; + sd->mdcnfg |= sdram->cas_latency << 28; + sd->mdcnfg |= twr << 14; + sd->mdcnfg |= twr << 30; + + sd->mdrefr = MDREFR & 0xffbffff0; + sd->mdrefr |= 7; + + if (sd_khz != mem_khz) + sd->mdrefr |= MDREFR_K1DB2; + + /* initial number of '1's in MDCAS + 1 */ + set_mdcas(sd->mdcas, sd_khz >= 62000, + ns_to_cycles(sdram->trcd, mem_khz)); + +#ifdef DEBUG + printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", + sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], + sd->mdcas[2]); +#endif +} + +/* + * Set the SDRAM refresh rate. + */ +static inline void sdram_set_refresh(u_int dri) +{ + MDREFR = (MDREFR & 0xffff000f) | (dri << 4); + (void) MDREFR; +} + +/* + * Update the refresh period. We do this such that we always refresh + * the SDRAMs within their permissible period. The refresh period is + * always a multiple of the memory clock (fixed at cpu_clock / 2). + * + * FIXME: we don't currently take account of burst accesses here, + * but neither do Intels DM nor Angel. + */ +static void +sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram) +{ + u_int ns_row = (sdram->refresh * 1000) >> sdram->rows; + u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32; + +#ifdef DEBUG + mdelay(250); + printk(KERN_DEBUG "new dri value = %d\n", dri); +#endif + + sdram_set_refresh(dri); +} + +/* + * Ok, set the CPU frequency. + */ +static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr) +{ + struct sdram_params *sdram = &sdram_params; + struct sdram_info sd; + unsigned long flags; + unsigned int unused; + + sdram_calculate_timing(&sd, sa11x0_freq_table[ppcr].frequency, sdram); + +#if 0 + /* + * These values are wrong according to the SA1110 documentation + * and errata, but they seem to work. Need to get a storage + * scope on to the SDRAM signals to work out why. + */ + if (policy->max < 147500) { + sd.mdrefr |= MDREFR_K1DB2; + sd.mdcas[0] = 0xaaaaaa7f; + } else { + sd.mdrefr &= ~MDREFR_K1DB2; + sd.mdcas[0] = 0xaaaaaa9f; + } + sd.mdcas[1] = 0xaaaaaaaa; + sd.mdcas[2] = 0xaaaaaaaa; +#endif + + /* + * The clock could be going away for some time. Set the SDRAMs + * to refresh rapidly (every 64 memory clock cycles). To get + * through the whole array, we need to wait 262144 mclk cycles. + * We wait 20ms to be safe. + */ + sdram_set_refresh(2); + if (!irqs_disabled()) + msleep(20); + else + mdelay(20); + + /* + * Reprogram the DRAM timings with interrupts disabled, and + * ensure that we are doing this within a complete cache line. + * This means that we won't access SDRAM for the duration of + * the programming. + */ + local_irq_save(flags); + asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); + udelay(10); + __asm__ __volatile__("\n\ + b 2f \n\ + .align 5 \n\ +1: str %3, [%1, #0] @ MDCNFG \n\ + str %4, [%1, #28] @ MDREFR \n\ + str %5, [%1, #4] @ MDCAS0 \n\ + str %6, [%1, #8] @ MDCAS1 \n\ + str %7, [%1, #12] @ MDCAS2 \n\ + str %8, [%2, #0] @ PPCR \n\ + ldr %0, [%1, #0] \n\ + b 3f \n\ +2: b 1b \n\ +3: nop \n\ + nop" + : "=&r" (unused) + : "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg), + "r" (sd.mdrefr), "r" (sd.mdcas[0]), + "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr)); + local_irq_restore(flags); + + /* + * Now, return the SDRAM refresh back to normal. + */ + sdram_update_refresh(sa11x0_freq_table[ppcr].frequency, sdram); + + return 0; +} + +static int __init sa1110_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL); +} + +/* sa1110_driver needs __refdata because it must remain after init registers + * it with cpufreq_register_driver() */ +static struct cpufreq_driver sa1110_driver __refdata = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sa1110_target, + .get = sa11x0_getspeed, + .init = sa1110_cpu_init, + .name = "sa1110", +}; + +static struct sdram_params *sa1110_find_sdram(const char *name) +{ + struct sdram_params *sdram; + + for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); + sdram++) + if (strcmp(name, sdram->name) == 0) + return sdram; + + return NULL; +} + +static char sdram_name[16]; + +static int __init sa1110_clk_init(void) +{ + struct sdram_params *sdram; + const char *name = sdram_name; + + if (!cpu_is_sa1110()) + return -ENODEV; + + if (!name[0]) { + if (machine_is_assabet()) + name = "TC59SM716-CL3"; + if (machine_is_pt_system3()) + name = "K4S641632D"; + if (machine_is_h3100()) + name = "KM416S4030CT"; + if (machine_is_jornada720() || machine_is_h3600()) + name = "K4S281632B-1H"; + if (machine_is_nanoengine()) + name = "MT48LC8M16A2TG-75"; + } + + sdram = sa1110_find_sdram(name); + if (sdram) { + printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d" + " twr: %d refresh: %d cas_latency: %d\n", + sdram->tck, sdram->trcd, sdram->trp, + sdram->twr, sdram->refresh, sdram->cas_latency); + + memcpy(&sdram_params, sdram, sizeof(sdram_params)); + + return cpufreq_register_driver(&sa1110_driver); + } + + return 0; +} + +module_param_string(sdram, sdram_name, sizeof(sdram_name), 0); +arch_initcall(sa1110_clk_init); diff --git a/kernel/drivers/cpufreq/sc520_freq.c b/kernel/drivers/cpufreq/sc520_freq.c new file mode 100644 index 000000000..ac84e4818 --- /dev/null +++ b/kernel/drivers/cpufreq/sc520_freq.c @@ -0,0 +1,140 @@ +/* + * sc520_freq.c: cpufreq driver for the AMD Elan sc520 + * + * Copyright (C) 2005 Sean Young <sean@mess.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on elanfreq.c + * + * 2005-03-30: - initial revision + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/delay.h> +#include <linux/cpufreq.h> +#include <linux/timex.h> +#include <linux/io.h> + +#include <asm/cpu_device_id.h> +#include <asm/msr.h> + +#define MMCR_BASE 0xfffef000 /* The default base address */ +#define OFFS_CPUCTL 0x2 /* CPU Control Register */ + +static __u8 __iomem *cpuctl; + +#define PFX "sc520_freq: " + +static struct cpufreq_frequency_table sc520_freq_table[] = { + {0, 0x01, 100000}, + {0, 0x02, 133000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg = *cpuctl; + + switch (clockspeed_reg & 0x03) { + default: + printk(KERN_ERR PFX "error: cpuctl register has unexpected " + "value %02x\n", clockspeed_reg); + case 0x01: + return 100000; + case 0x02: + return 133000; + } +} + +static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state) +{ + + u8 clockspeed_reg; + + local_irq_disable(); + + clockspeed_reg = *cpuctl & ~0x03; + *cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data; + + local_irq_enable(); + + return 0; +} + +/* + * Module init and exit code + */ + +static int sc520_freq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + + /* capability check */ + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) + return -ENODEV; + + /* cpuinfo and default policy values */ + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + + return cpufreq_table_validate_and_show(policy, sc520_freq_table); +} + + +static struct cpufreq_driver sc520_freq_driver = { + .get = sc520_freq_get_cpu_frequency, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sc520_freq_target, + .init = sc520_freq_cpu_init, + .name = "sc520_freq", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id sc520_ids[] = { + { X86_VENDOR_AMD, 4, 9 }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, sc520_ids); + +static int __init sc520_freq_init(void) +{ + int err; + + if (!x86_match_cpu(sc520_ids)) + return -ENODEV; + + cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); + if (!cpuctl) { + printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); + return -ENOMEM; + } + + err = cpufreq_register_driver(&sc520_freq_driver); + if (err) + iounmap(cpuctl); + + return err; +} + + +static void __exit sc520_freq_exit(void) +{ + cpufreq_unregister_driver(&sc520_freq_driver); + iounmap(cpuctl); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sean Young <sean@mess.org>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); + +module_init(sc520_freq_init); +module_exit(sc520_freq_exit); + diff --git a/kernel/drivers/cpufreq/sfi-cpufreq.c b/kernel/drivers/cpufreq/sfi-cpufreq.c new file mode 100644 index 000000000..ffa3389e5 --- /dev/null +++ b/kernel/drivers/cpufreq/sfi-cpufreq.c @@ -0,0 +1,136 @@ +/* + * SFI Performance States Driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * Author: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com> + * Author: Srinidhi Kasagar <srinidhi.kasagar@intel.com> + */ + +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sfi.h> +#include <linux/slab.h> +#include <linux/smp.h> + +#include <asm/msr.h> + +struct cpufreq_frequency_table *freq_table; +static struct sfi_freq_table_entry *sfi_cpufreq_array; +static int num_freq_table_entries; + +static int sfi_parse_freq(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_freq_table_entry *pentry; + int totallen; + + sb = (struct sfi_table_simple *)table; + num_freq_table_entries = SFI_GET_NUM_ENTRIES(sb, + struct sfi_freq_table_entry); + if (num_freq_table_entries <= 1) { + pr_err("No p-states discovered\n"); + return -ENODEV; + } + + pentry = (struct sfi_freq_table_entry *)sb->pentry; + totallen = num_freq_table_entries * sizeof(*pentry); + + sfi_cpufreq_array = kzalloc(totallen, GFP_KERNEL); + if (!sfi_cpufreq_array) + return -ENOMEM; + + memcpy(sfi_cpufreq_array, pentry, totallen); + + return 0; +} + +static int sfi_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int next_perf_state = 0; /* Index into perf table */ + u32 lo, hi; + + next_perf_state = policy->freq_table[index].driver_data; + + rdmsr_on_cpu(policy->cpu, MSR_IA32_PERF_CTL, &lo, &hi); + lo = (lo & ~INTEL_PERF_CTL_MASK) | + ((u32) sfi_cpufreq_array[next_perf_state].ctrl_val & + INTEL_PERF_CTL_MASK); + wrmsr_on_cpu(policy->cpu, MSR_IA32_PERF_CTL, lo, hi); + + return 0; +} + +static int sfi_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->shared_type = CPUFREQ_SHARED_TYPE_HW; + policy->cpuinfo.transition_latency = 100000; /* 100us */ + + return cpufreq_table_validate_and_show(policy, freq_table); +} + +static struct cpufreq_driver sfi_cpufreq_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sfi_cpufreq_target, + .init = sfi_cpufreq_cpu_init, + .name = "sfi-cpufreq", + .attr = cpufreq_generic_attr, +}; + +static int __init sfi_cpufreq_init(void) +{ + int ret, i; + + /* parse the freq table from SFI */ + ret = sfi_table_parse(SFI_SIG_FREQ, NULL, NULL, sfi_parse_freq); + if (ret) + return ret; + + freq_table = kzalloc(sizeof(*freq_table) * + (num_freq_table_entries + 1), GFP_KERNEL); + if (!freq_table) { + ret = -ENOMEM; + goto err_free_array; + } + + for (i = 0; i < num_freq_table_entries; i++) { + freq_table[i].driver_data = i; + freq_table[i].frequency = sfi_cpufreq_array[i].freq_mhz * 1000; + } + freq_table[i].frequency = CPUFREQ_TABLE_END; + + ret = cpufreq_register_driver(&sfi_cpufreq_driver); + if (ret) + goto err_free_tbl; + + return ret; + +err_free_tbl: + kfree(freq_table); +err_free_array: + kfree(sfi_cpufreq_array); + return ret; +} +late_initcall(sfi_cpufreq_init); + +static void __exit sfi_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&sfi_cpufreq_driver); + kfree(freq_table); + kfree(sfi_cpufreq_array); +} +module_exit(sfi_cpufreq_exit); + +MODULE_AUTHOR("Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>"); +MODULE_DESCRIPTION("SFI Performance-States Driver"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/sh-cpufreq.c b/kernel/drivers/cpufreq/sh-cpufreq.c new file mode 100644 index 000000000..86628e22b --- /dev/null +++ b/kernel/drivers/cpufreq/sh-cpufreq.c @@ -0,0 +1,177 @@ +/* + * cpufreq driver for the SuperH processors. + * + * Copyright (C) 2002 - 2012 Paul Mundt + * Copyright (C) 2002 M. R. Brown + * + * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c + * + * Copyright (C) 2004-2007 Atmel Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define pr_fmt(fmt) "cpufreq: " fmt + +#include <linux/types.h> +#include <linux/cpufreq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/cpumask.h> +#include <linux/cpu.h> +#include <linux/smp.h> +#include <linux/sched.h> /* set_cpus_allowed() */ +#include <linux/clk.h> +#include <linux/percpu.h> +#include <linux/sh_clk.h> + +static DEFINE_PER_CPU(struct clk, sh_cpuclk); + +static unsigned int sh_cpufreq_get(unsigned int cpu) +{ + return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000; +} + +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int sh_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int cpu = policy->cpu; + struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); + cpumask_t cpus_allowed; + struct cpufreq_freqs freqs; + struct device *dev; + long freq; + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + + BUG_ON(smp_processor_id() != cpu); + + dev = get_cpu_device(cpu); + + /* Convert target_freq from kHz to Hz */ + freq = clk_round_rate(cpuclk, target_freq * 1000); + + if (freq < (policy->min * 1000) || freq > (policy->max * 1000)) + return -EINVAL; + + dev_dbg(dev, "requested frequency %u Hz\n", target_freq * 1000); + + freqs.old = sh_cpufreq_get(cpu); + freqs.new = (freq + 500) / 1000; + freqs.flags = 0; + + cpufreq_freq_transition_begin(policy, &freqs); + set_cpus_allowed_ptr(current, &cpus_allowed); + clk_set_rate(cpuclk, freq); + cpufreq_freq_transition_end(policy, &freqs, 0); + + dev_dbg(dev, "set frequency %lu Hz\n", freq); + + return 0; +} + +static int sh_cpufreq_verify(struct cpufreq_policy *policy) +{ + struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu); + struct cpufreq_frequency_table *freq_table; + + freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL; + if (freq_table) + return cpufreq_frequency_table_verify(policy, freq_table); + + cpufreq_verify_within_cpu_limits(policy); + + policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000; + policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; + + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); + struct cpufreq_frequency_table *freq_table; + struct device *dev; + + dev = get_cpu_device(cpu); + + cpuclk = clk_get(dev, "cpu_clk"); + if (IS_ERR(cpuclk)) { + dev_err(dev, "couldn't get CPU clk\n"); + return PTR_ERR(cpuclk); + } + + freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL; + if (freq_table) { + int result; + + result = cpufreq_table_validate_and_show(policy, freq_table); + if (result) + return result; + } else { + dev_notice(dev, "no frequency table found, falling back " + "to rate rounding.\n"); + + policy->min = policy->cpuinfo.min_freq = + (clk_round_rate(cpuclk, 1) + 500) / 1000; + policy->max = policy->cpuinfo.max_freq = + (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; + } + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + + dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, " + "Maximum %u.%03u MHz.\n", + policy->min / 1000, policy->min % 1000, + policy->max / 1000, policy->max % 1000); + + return 0; +} + +static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); + + clk_put(cpuclk); + + return 0; +} + +static struct cpufreq_driver sh_cpufreq_driver = { + .name = "sh", + .get = sh_cpufreq_get, + .target = sh_cpufreq_target, + .verify = sh_cpufreq_verify, + .init = sh_cpufreq_cpu_init, + .exit = sh_cpufreq_cpu_exit, + .attr = cpufreq_generic_attr, +}; + +static int __init sh_cpufreq_module_init(void) +{ + pr_notice("SuperH CPU frequency driver.\n"); + return cpufreq_register_driver(&sh_cpufreq_driver); +} + +static void __exit sh_cpufreq_module_exit(void) +{ + cpufreq_unregister_driver(&sh_cpufreq_driver); +} + +module_init(sh_cpufreq_module_init); +module_exit(sh_cpufreq_module_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("cpufreq driver for SuperH"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/sparc-us2e-cpufreq.c b/kernel/drivers/cpufreq/sparc-us2e-cpufreq.c new file mode 100644 index 000000000..b73feeb66 --- /dev/null +++ b/kernel/drivers/cpufreq/sparc-us2e-cpufreq.c @@ -0,0 +1,378 @@ +/* us2e_cpufreq.c: UltraSPARC-IIe cpu frequency support + * + * Copyright (C) 2003 David S. Miller (davem@redhat.com) + * + * Many thanks to Dominik Brodowski for fixing up the cpufreq + * infrastructure in order to make this driver easier to implement. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/threads.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <asm/asi.h> +#include <asm/timer.h> + +static struct cpufreq_driver *cpufreq_us2e_driver; + +struct us2e_freq_percpu_info { + struct cpufreq_frequency_table table[6]; +}; + +/* Indexed by cpu number. */ +static struct us2e_freq_percpu_info *us2e_freq_table; + +#define HBIRD_MEM_CNTL0_ADDR 0x1fe0000f010UL +#define HBIRD_ESTAR_MODE_ADDR 0x1fe0000f080UL + +/* UltraSPARC-IIe has five dividers: 1, 2, 4, 6, and 8. These are controlled + * in the ESTAR mode control register. + */ +#define ESTAR_MODE_DIV_1 0x0000000000000000UL +#define ESTAR_MODE_DIV_2 0x0000000000000001UL +#define ESTAR_MODE_DIV_4 0x0000000000000003UL +#define ESTAR_MODE_DIV_6 0x0000000000000002UL +#define ESTAR_MODE_DIV_8 0x0000000000000004UL +#define ESTAR_MODE_DIV_MASK 0x0000000000000007UL + +#define MCTRL0_SREFRESH_ENAB 0x0000000000010000UL +#define MCTRL0_REFR_COUNT_MASK 0x0000000000007f00UL +#define MCTRL0_REFR_COUNT_SHIFT 8 +#define MCTRL0_REFR_INTERVAL 7800 +#define MCTRL0_REFR_CLKS_P_CNT 64 + +static unsigned long read_hbreg(unsigned long addr) +{ + unsigned long ret; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=&r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + return ret; +} + +static void write_hbreg(unsigned long addr, unsigned long val) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); + if (addr == HBIRD_ESTAR_MODE_ADDR) { + /* Need to wait 16 clock cycles for the PLL to lock. */ + udelay(1); + } +} + +static void self_refresh_ctl(int enable) +{ + unsigned long mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); + + if (enable) + mctrl |= MCTRL0_SREFRESH_ENAB; + else + mctrl &= ~MCTRL0_SREFRESH_ENAB; + write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl); + (void) read_hbreg(HBIRD_MEM_CNTL0_ADDR); +} + +static void frob_mem_refresh(int cpu_slowing_down, + unsigned long clock_tick, + unsigned long old_divisor, unsigned long divisor) +{ + unsigned long old_refr_count, refr_count, mctrl; + + refr_count = (clock_tick * MCTRL0_REFR_INTERVAL); + refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL); + + mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); + old_refr_count = (mctrl & MCTRL0_REFR_COUNT_MASK) + >> MCTRL0_REFR_COUNT_SHIFT; + + mctrl &= ~MCTRL0_REFR_COUNT_MASK; + mctrl |= refr_count << MCTRL0_REFR_COUNT_SHIFT; + write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl); + mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); + + if (cpu_slowing_down && !(mctrl & MCTRL0_SREFRESH_ENAB)) { + unsigned long usecs; + + /* We have to wait for both refresh counts (old + * and new) to go to zero. + */ + usecs = (MCTRL0_REFR_CLKS_P_CNT * + (refr_count + old_refr_count) * + 1000000UL * + old_divisor) / clock_tick; + udelay(usecs + 1UL); + } +} + +static void us2e_transition(unsigned long estar, unsigned long new_bits, + unsigned long clock_tick, + unsigned long old_divisor, unsigned long divisor) +{ + unsigned long flags; + + local_irq_save(flags); + + estar &= ~ESTAR_MODE_DIV_MASK; + + /* This is based upon the state transition diagram in the IIe manual. */ + if (old_divisor == 2 && divisor == 1) { + self_refresh_ctl(0); + write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); + frob_mem_refresh(0, clock_tick, old_divisor, divisor); + } else if (old_divisor == 1 && divisor == 2) { + frob_mem_refresh(1, clock_tick, old_divisor, divisor); + write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); + self_refresh_ctl(1); + } else if (old_divisor == 1 && divisor > 2) { + us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick, + 1, 2); + us2e_transition(estar, new_bits, clock_tick, + 2, divisor); + } else if (old_divisor > 2 && divisor == 1) { + us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick, + old_divisor, 2); + us2e_transition(estar, new_bits, clock_tick, + 2, divisor); + } else if (old_divisor < divisor) { + frob_mem_refresh(0, clock_tick, old_divisor, divisor); + write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); + } else if (old_divisor > divisor) { + write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); + frob_mem_refresh(1, clock_tick, old_divisor, divisor); + } else { + BUG(); + } + + local_irq_restore(flags); +} + +static unsigned long index_to_estar_mode(unsigned int index) +{ + switch (index) { + case 0: + return ESTAR_MODE_DIV_1; + + case 1: + return ESTAR_MODE_DIV_2; + + case 2: + return ESTAR_MODE_DIV_4; + + case 3: + return ESTAR_MODE_DIV_6; + + case 4: + return ESTAR_MODE_DIV_8; + + default: + BUG(); + } +} + +static unsigned long index_to_divisor(unsigned int index) +{ + switch (index) { + case 0: + return 1; + + case 1: + return 2; + + case 2: + return 4; + + case 3: + return 6; + + case 4: + return 8; + + default: + BUG(); + } +} + +static unsigned long estar_to_divisor(unsigned long estar) +{ + unsigned long ret; + + switch (estar & ESTAR_MODE_DIV_MASK) { + case ESTAR_MODE_DIV_1: + ret = 1; + break; + case ESTAR_MODE_DIV_2: + ret = 2; + break; + case ESTAR_MODE_DIV_4: + ret = 4; + break; + case ESTAR_MODE_DIV_6: + ret = 6; + break; + case ESTAR_MODE_DIV_8: + ret = 8; + break; + default: + BUG(); + } + + return ret; +} + +static unsigned int us2e_freq_get(unsigned int cpu) +{ + cpumask_t cpus_allowed; + unsigned long clock_tick, estar; + + cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + + clock_tick = sparc64_get_clock_tick(cpu) / 1000; + estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR); + + set_cpus_allowed_ptr(current, &cpus_allowed); + + return clock_tick / estar_to_divisor(estar); +} + +static int us2e_freq_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int cpu = policy->cpu; + unsigned long new_bits, new_freq; + unsigned long clock_tick, divisor, old_divisor, estar; + cpumask_t cpus_allowed; + + cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + + new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000; + new_bits = index_to_estar_mode(index); + divisor = index_to_divisor(index); + new_freq /= divisor; + + estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR); + + old_divisor = estar_to_divisor(estar); + + if (old_divisor != divisor) + us2e_transition(estar, new_bits, clock_tick * 1000, + old_divisor, divisor); + + set_cpus_allowed_ptr(current, &cpus_allowed); + + return 0; +} + +static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; + struct cpufreq_frequency_table *table = + &us2e_freq_table[cpu].table[0]; + + table[0].driver_data = 0; + table[0].frequency = clock_tick / 1; + table[1].driver_data = 1; + table[1].frequency = clock_tick / 2; + table[2].driver_data = 2; + table[2].frequency = clock_tick / 4; + table[2].driver_data = 3; + table[2].frequency = clock_tick / 6; + table[2].driver_data = 4; + table[2].frequency = clock_tick / 8; + table[2].driver_data = 5; + table[3].frequency = CPUFREQ_TABLE_END; + + policy->cpuinfo.transition_latency = 0; + policy->cur = clock_tick; + + return cpufreq_table_validate_and_show(policy, table); +} + +static int us2e_freq_cpu_exit(struct cpufreq_policy *policy) +{ + if (cpufreq_us2e_driver) + us2e_freq_target(policy, 0); + + return 0; +} + +static int __init us2e_freq_init(void) +{ + unsigned long manuf, impl, ver; + int ret; + + if (tlb_type != spitfire) + return -ENODEV; + + __asm__("rdpr %%ver, %0" : "=r" (ver)); + manuf = ((ver >> 48) & 0xffff); + impl = ((ver >> 32) & 0xffff); + + if (manuf == 0x17 && impl == 0x13) { + struct cpufreq_driver *driver; + + ret = -ENOMEM; + driver = kzalloc(sizeof(*driver), GFP_KERNEL); + if (!driver) + goto err_out; + + us2e_freq_table = kzalloc((NR_CPUS * sizeof(*us2e_freq_table)), + GFP_KERNEL); + if (!us2e_freq_table) + goto err_out; + + driver->init = us2e_freq_cpu_init; + driver->verify = cpufreq_generic_frequency_table_verify; + driver->target_index = us2e_freq_target; + driver->get = us2e_freq_get; + driver->exit = us2e_freq_cpu_exit; + strcpy(driver->name, "UltraSPARC-IIe"); + + cpufreq_us2e_driver = driver; + ret = cpufreq_register_driver(driver); + if (ret) + goto err_out; + + return 0; + +err_out: + if (driver) { + kfree(driver); + cpufreq_us2e_driver = NULL; + } + kfree(us2e_freq_table); + us2e_freq_table = NULL; + return ret; + } + + return -ENODEV; +} + +static void __exit us2e_freq_exit(void) +{ + if (cpufreq_us2e_driver) { + cpufreq_unregister_driver(cpufreq_us2e_driver); + kfree(cpufreq_us2e_driver); + cpufreq_us2e_driver = NULL; + kfree(us2e_freq_table); + us2e_freq_table = NULL; + } +} + +MODULE_AUTHOR("David S. Miller <davem@redhat.com>"); +MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-IIe"); +MODULE_LICENSE("GPL"); + +module_init(us2e_freq_init); +module_exit(us2e_freq_exit); diff --git a/kernel/drivers/cpufreq/sparc-us3-cpufreq.c b/kernel/drivers/cpufreq/sparc-us3-cpufreq.c new file mode 100644 index 000000000..9bb42ba50 --- /dev/null +++ b/kernel/drivers/cpufreq/sparc-us3-cpufreq.c @@ -0,0 +1,237 @@ +/* us3_cpufreq.c: UltraSPARC-III cpu frequency support + * + * Copyright (C) 2003 David S. Miller (davem@redhat.com) + * + * Many thanks to Dominik Brodowski for fixing up the cpufreq + * infrastructure in order to make this driver easier to implement. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/threads.h> +#include <linux/slab.h> +#include <linux/init.h> + +#include <asm/head.h> +#include <asm/timer.h> + +static struct cpufreq_driver *cpufreq_us3_driver; + +struct us3_freq_percpu_info { + struct cpufreq_frequency_table table[4]; +}; + +/* Indexed by cpu number. */ +static struct us3_freq_percpu_info *us3_freq_table; + +/* UltraSPARC-III has three dividers: 1, 2, and 32. These are controlled + * in the Safari config register. + */ +#define SAFARI_CFG_DIV_1 0x0000000000000000UL +#define SAFARI_CFG_DIV_2 0x0000000040000000UL +#define SAFARI_CFG_DIV_32 0x0000000080000000UL +#define SAFARI_CFG_DIV_MASK 0x00000000C0000000UL + +static unsigned long read_safari_cfg(void) +{ + unsigned long ret; + + __asm__ __volatile__("ldxa [%%g0] %1, %0" + : "=&r" (ret) + : "i" (ASI_SAFARI_CONFIG)); + return ret; +} + +static void write_safari_cfg(unsigned long val) +{ + __asm__ __volatile__("stxa %0, [%%g0] %1\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (val), "i" (ASI_SAFARI_CONFIG) + : "memory"); +} + +static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg) +{ + unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; + unsigned long ret; + + switch (safari_cfg & SAFARI_CFG_DIV_MASK) { + case SAFARI_CFG_DIV_1: + ret = clock_tick / 1; + break; + case SAFARI_CFG_DIV_2: + ret = clock_tick / 2; + break; + case SAFARI_CFG_DIV_32: + ret = clock_tick / 32; + break; + default: + BUG(); + } + + return ret; +} + +static unsigned int us3_freq_get(unsigned int cpu) +{ + cpumask_t cpus_allowed; + unsigned long reg; + unsigned int ret; + + cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + + reg = read_safari_cfg(); + ret = get_current_freq(cpu, reg); + + set_cpus_allowed_ptr(current, &cpus_allowed); + + return ret; +} + +static int us3_freq_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int cpu = policy->cpu; + unsigned long new_bits, new_freq, reg; + cpumask_t cpus_allowed; + + cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + + new_freq = sparc64_get_clock_tick(cpu) / 1000; + switch (index) { + case 0: + new_bits = SAFARI_CFG_DIV_1; + new_freq /= 1; + break; + case 1: + new_bits = SAFARI_CFG_DIV_2; + new_freq /= 2; + break; + case 2: + new_bits = SAFARI_CFG_DIV_32; + new_freq /= 32; + break; + + default: + BUG(); + } + + reg = read_safari_cfg(); + + reg &= ~SAFARI_CFG_DIV_MASK; + reg |= new_bits; + write_safari_cfg(reg); + + set_cpus_allowed_ptr(current, &cpus_allowed); + + return 0; +} + +static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; + struct cpufreq_frequency_table *table = + &us3_freq_table[cpu].table[0]; + + table[0].driver_data = 0; + table[0].frequency = clock_tick / 1; + table[1].driver_data = 1; + table[1].frequency = clock_tick / 2; + table[2].driver_data = 2; + table[2].frequency = clock_tick / 32; + table[3].driver_data = 0; + table[3].frequency = CPUFREQ_TABLE_END; + + policy->cpuinfo.transition_latency = 0; + policy->cur = clock_tick; + + return cpufreq_table_validate_and_show(policy, table); +} + +static int us3_freq_cpu_exit(struct cpufreq_policy *policy) +{ + if (cpufreq_us3_driver) + us3_freq_target(policy, 0); + + return 0; +} + +static int __init us3_freq_init(void) +{ + unsigned long manuf, impl, ver; + int ret; + + if (tlb_type != cheetah && tlb_type != cheetah_plus) + return -ENODEV; + + __asm__("rdpr %%ver, %0" : "=r" (ver)); + manuf = ((ver >> 48) & 0xffff); + impl = ((ver >> 32) & 0xffff); + + if (manuf == CHEETAH_MANUF && + (impl == CHEETAH_IMPL || + impl == CHEETAH_PLUS_IMPL || + impl == JAGUAR_IMPL || + impl == PANTHER_IMPL)) { + struct cpufreq_driver *driver; + + ret = -ENOMEM; + driver = kzalloc(sizeof(*driver), GFP_KERNEL); + if (!driver) + goto err_out; + + us3_freq_table = kzalloc((NR_CPUS * sizeof(*us3_freq_table)), + GFP_KERNEL); + if (!us3_freq_table) + goto err_out; + + driver->init = us3_freq_cpu_init; + driver->verify = cpufreq_generic_frequency_table_verify; + driver->target_index = us3_freq_target; + driver->get = us3_freq_get; + driver->exit = us3_freq_cpu_exit; + strcpy(driver->name, "UltraSPARC-III"); + + cpufreq_us3_driver = driver; + ret = cpufreq_register_driver(driver); + if (ret) + goto err_out; + + return 0; + +err_out: + if (driver) { + kfree(driver); + cpufreq_us3_driver = NULL; + } + kfree(us3_freq_table); + us3_freq_table = NULL; + return ret; + } + + return -ENODEV; +} + +static void __exit us3_freq_exit(void) +{ + if (cpufreq_us3_driver) { + cpufreq_unregister_driver(cpufreq_us3_driver); + kfree(cpufreq_us3_driver); + cpufreq_us3_driver = NULL; + kfree(us3_freq_table); + us3_freq_table = NULL; + } +} + +MODULE_AUTHOR("David S. Miller <davem@redhat.com>"); +MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-III"); +MODULE_LICENSE("GPL"); + +module_init(us3_freq_init); +module_exit(us3_freq_exit); diff --git a/kernel/drivers/cpufreq/spear-cpufreq.c b/kernel/drivers/cpufreq/spear-cpufreq.c new file mode 100644 index 000000000..4894924a3 --- /dev/null +++ b/kernel/drivers/cpufreq/spear-cpufreq.c @@ -0,0 +1,246 @@ +/* + * drivers/cpufreq/spear-cpufreq.c + * + * CPU Frequency Scaling for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Deepak Sikri <deepak.sikri@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> + +/* SPEAr CPUFreq driver data structure */ +static struct { + struct clk *clk; + unsigned int transition_latency; + struct cpufreq_frequency_table *freq_tbl; + u32 cnt; +} spear_cpufreq; + +static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq) +{ + struct clk *sys_pclk; + int pclk; + /* + * In SPEAr1340, cpu clk's parent sys clk can take input from + * following sources + */ + const char *sys_clk_src[] = { + "sys_syn_clk", + "pll1_clk", + "pll2_clk", + "pll3_clk", + }; + + /* + * As sys clk can have multiple source with their own range + * limitation so we choose possible sources accordingly + */ + if (newfreq <= 300000000) + pclk = 0; /* src is sys_syn_clk */ + else if (newfreq > 300000000 && newfreq <= 500000000) + pclk = 3; /* src is pll3_clk */ + else if (newfreq == 600000000) + pclk = 1; /* src is pll1_clk */ + else + return ERR_PTR(-EINVAL); + + /* Get parent to sys clock */ + sys_pclk = clk_get(NULL, sys_clk_src[pclk]); + if (IS_ERR(sys_pclk)) + pr_err("Failed to get %s clock\n", sys_clk_src[pclk]); + + return sys_pclk; +} + +/* + * In SPEAr1340, we cannot use newfreq directly because we need to actually + * access a source clock (clk) which might not be ancestor of cpu at present. + * Hence in SPEAr1340 we would operate on source clock directly before switching + * cpu clock to it. + */ +static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq) +{ + struct clk *sys_clk; + int ret = 0; + + sys_clk = clk_get_parent(spear_cpufreq.clk); + if (IS_ERR(sys_clk)) { + pr_err("failed to get cpu's parent (sys) clock\n"); + return PTR_ERR(sys_clk); + } + + /* Set the rate of the source clock before changing the parent */ + ret = clk_set_rate(sys_pclk, newfreq); + if (ret) { + pr_err("Failed to set sys clk rate to %lu\n", newfreq); + return ret; + } + + ret = clk_set_parent(sys_clk, sys_pclk); + if (ret) { + pr_err("Failed to set sys clk parent\n"); + return ret; + } + + return 0; +} + +static int spear_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + long newfreq; + struct clk *srcclk; + int ret, mult = 1; + + newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000; + + if (of_machine_is_compatible("st,spear1340")) { + /* + * SPEAr1340 is special in the sense that due to the possibility + * of multiple clock sources for cpu clk's parent we can have + * different clock source for different frequency of cpu clk. + * Hence we need to choose one from amongst these possible clock + * sources. + */ + srcclk = spear1340_cpu_get_possible_parent(newfreq); + if (IS_ERR(srcclk)) { + pr_err("Failed to get src clk\n"); + return PTR_ERR(srcclk); + } + + /* SPEAr1340: src clk is always 2 * intended cpu clk */ + mult = 2; + } else { + /* + * src clock to be altered is ancestor of cpu clock. Hence we + * can directly work on cpu clk + */ + srcclk = spear_cpufreq.clk; + } + + newfreq = clk_round_rate(srcclk, newfreq * mult); + if (newfreq <= 0) { + pr_err("clk_round_rate failed for cpu src clock\n"); + return newfreq; + } + + if (mult == 2) + ret = spear1340_set_cpu_rate(srcclk, newfreq); + else + ret = clk_set_rate(spear_cpufreq.clk, newfreq); + + if (ret) + pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret); + + return ret; +} + +static int spear_cpufreq_init(struct cpufreq_policy *policy) +{ + policy->clk = spear_cpufreq.clk; + return cpufreq_generic_init(policy, spear_cpufreq.freq_tbl, + spear_cpufreq.transition_latency); +} + +static struct cpufreq_driver spear_cpufreq_driver = { + .name = "cpufreq-spear", + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = spear_cpufreq_target, + .get = cpufreq_generic_get, + .init = spear_cpufreq_init, + .attr = cpufreq_generic_attr, +}; + +static int spear_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + const struct property *prop; + struct cpufreq_frequency_table *freq_tbl; + const __be32 *val; + int cnt, i, ret; + + np = of_cpu_device_node_get(0); + if (!np) { + pr_err("No cpu node found"); + return -ENODEV; + } + + if (of_property_read_u32(np, "clock-latency", + &spear_cpufreq.transition_latency)) + spear_cpufreq.transition_latency = CPUFREQ_ETERNAL; + + prop = of_find_property(np, "cpufreq_tbl", NULL); + if (!prop || !prop->value) { + pr_err("Invalid cpufreq_tbl"); + ret = -ENODEV; + goto out_put_node; + } + + cnt = prop->length / sizeof(u32); + val = prop->value; + + freq_tbl = kzalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL); + if (!freq_tbl) { + ret = -ENOMEM; + goto out_put_node; + } + + for (i = 0; i < cnt; i++) + freq_tbl[i].frequency = be32_to_cpup(val++); + + freq_tbl[i].frequency = CPUFREQ_TABLE_END; + + spear_cpufreq.freq_tbl = freq_tbl; + + of_node_put(np); + + spear_cpufreq.clk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(spear_cpufreq.clk)) { + pr_err("Unable to get CPU clock\n"); + ret = PTR_ERR(spear_cpufreq.clk); + goto out_put_mem; + } + + ret = cpufreq_register_driver(&spear_cpufreq_driver); + if (!ret) + return 0; + + pr_err("failed register driver: %d\n", ret); + clk_put(spear_cpufreq.clk); + +out_put_mem: + kfree(freq_tbl); + return ret; + +out_put_node: + of_node_put(np); + return ret; +} + +static struct platform_driver spear_cpufreq_platdrv = { + .driver = { + .name = "spear-cpufreq", + }, + .probe = spear_cpufreq_probe, +}; +module_platform_driver(spear_cpufreq_platdrv); + +MODULE_AUTHOR("Deepak Sikri <deepak.sikri@st.com>"); +MODULE_DESCRIPTION("SPEAr CPUFreq driver"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/speedstep-centrino.c b/kernel/drivers/cpufreq/speedstep-centrino.c new file mode 100644 index 000000000..7d4a31571 --- /dev/null +++ b/kernel/drivers/cpufreq/speedstep-centrino.c @@ -0,0 +1,566 @@ +/* + * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium + * M (part of the Centrino chipset). + * + * Since the original Pentium M, most new Intel CPUs support Enhanced + * SpeedStep. + * + * Despite the "SpeedStep" in the name, this is almost entirely unlike + * traditional SpeedStep. + * + * Modelled on speedstep.c + * + * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/sched.h> /* current */ +#include <linux/delay.h> +#include <linux/compiler.h> +#include <linux/gfp.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpufeature.h> +#include <asm/cpu_device_id.h> + +#define PFX "speedstep-centrino: " +#define MAINTAINER "linux-pm@vger.kernel.org" + +#define INTEL_MSR_RANGE (0xffff) + +struct cpu_id +{ + __u8 x86; /* CPU family */ + __u8 x86_model; /* model */ + __u8 x86_mask; /* stepping */ +}; + +enum { + CPU_BANIAS, + CPU_DOTHAN_A1, + CPU_DOTHAN_A2, + CPU_DOTHAN_B0, + CPU_MP4HT_D0, + CPU_MP4HT_E0, +}; + +static const struct cpu_id cpu_ids[] = { + [CPU_BANIAS] = { 6, 9, 5 }, + [CPU_DOTHAN_A1] = { 6, 13, 1 }, + [CPU_DOTHAN_A2] = { 6, 13, 2 }, + [CPU_DOTHAN_B0] = { 6, 13, 6 }, + [CPU_MP4HT_D0] = {15, 3, 4 }, + [CPU_MP4HT_E0] = {15, 4, 1 }, +}; +#define N_IDS ARRAY_SIZE(cpu_ids) + +struct cpu_model +{ + const struct cpu_id *cpu_id; + const char *model_name; + unsigned max_freq; /* max clock in kHz */ + + struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ +}; +static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, + const struct cpu_id *x); + +/* Operating points for current CPU */ +static DEFINE_PER_CPU(struct cpu_model *, centrino_model); +static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu); + +static struct cpufreq_driver centrino_driver; + +#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE + +/* Computes the correct form for IA32_PERF_CTL MSR for a particular + frequency/voltage operating point; frequency in MHz, volts in mV. + This is stored as "driver_data" in the structure. */ +#define OP(mhz, mv) \ + { \ + .frequency = (mhz) * 1000, \ + .driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \ + } + +/* + * These voltage tables were derived from the Intel Pentium M + * datasheet, document 25261202.pdf, Table 5. I have verified they + * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium + * M. + */ + +/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ +static struct cpufreq_frequency_table banias_900[] = +{ + OP(600, 844), + OP(800, 988), + OP(900, 1004), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ +static struct cpufreq_frequency_table banias_1000[] = +{ + OP(600, 844), + OP(800, 972), + OP(900, 988), + OP(1000, 1004), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ +static struct cpufreq_frequency_table banias_1100[] = +{ + OP( 600, 956), + OP( 800, 1020), + OP( 900, 1100), + OP(1000, 1164), + OP(1100, 1180), + { .frequency = CPUFREQ_TABLE_END } +}; + + +/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ +static struct cpufreq_frequency_table banias_1200[] = +{ + OP( 600, 956), + OP( 800, 1004), + OP( 900, 1020), + OP(1000, 1100), + OP(1100, 1164), + OP(1200, 1180), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.30GHz (Banias) */ +static struct cpufreq_frequency_table banias_1300[] = +{ + OP( 600, 956), + OP( 800, 1260), + OP(1000, 1292), + OP(1200, 1356), + OP(1300, 1388), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.40GHz (Banias) */ +static struct cpufreq_frequency_table banias_1400[] = +{ + OP( 600, 956), + OP( 800, 1180), + OP(1000, 1308), + OP(1200, 1436), + OP(1400, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.50GHz (Banias) */ +static struct cpufreq_frequency_table banias_1500[] = +{ + OP( 600, 956), + OP( 800, 1116), + OP(1000, 1228), + OP(1200, 1356), + OP(1400, 1452), + OP(1500, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.60GHz (Banias) */ +static struct cpufreq_frequency_table banias_1600[] = +{ + OP( 600, 956), + OP( 800, 1036), + OP(1000, 1164), + OP(1200, 1276), + OP(1400, 1420), + OP(1600, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.70GHz (Banias) */ +static struct cpufreq_frequency_table banias_1700[] = +{ + OP( 600, 956), + OP( 800, 1004), + OP(1000, 1116), + OP(1200, 1228), + OP(1400, 1308), + OP(1700, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; +#undef OP + +#define _BANIAS(cpuid, max, name) \ +{ .cpu_id = cpuid, \ + .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ + .max_freq = (max)*1000, \ + .op_points = banias_##max, \ +} +#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) + +/* CPU models, their operating frequency range, and freq/voltage + operating points */ +static struct cpu_model models[] = +{ + _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), + BANIAS(1000), + BANIAS(1100), + BANIAS(1200), + BANIAS(1300), + BANIAS(1400), + BANIAS(1500), + BANIAS(1600), + BANIAS(1700), + + /* NULL model_name is a wildcard */ + { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, + { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, + { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, + + { NULL, } +}; +#undef _BANIAS +#undef BANIAS + +static int centrino_cpu_init_table(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); + struct cpu_model *model; + + for(model = models; model->cpu_id != NULL; model++) + if (centrino_verify_cpu_id(cpu, model->cpu_id) && + (model->model_name == NULL || + strcmp(cpu->x86_model_id, model->model_name) == 0)) + break; + + if (model->cpu_id == NULL) { + /* No match at all */ + pr_debug("no support for CPU model \"%s\": " + "send /proc/cpuinfo to " MAINTAINER "\n", + cpu->x86_model_id); + return -ENOENT; + } + + if (model->op_points == NULL) { + /* Matched a non-match */ + pr_debug("no table support for CPU model \"%s\"\n", + cpu->x86_model_id); + pr_debug("try using the acpi-cpufreq driver\n"); + return -ENOENT; + } + + per_cpu(centrino_model, policy->cpu) = model; + + pr_debug("found \"%s\": max frequency: %dkHz\n", + model->model_name, model->max_freq); + + return 0; +} + +#else +static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) +{ + return -ENODEV; +} +#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ + +static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, + const struct cpu_id *x) +{ + if ((c->x86 == x->x86) && + (c->x86_model == x->x86_model) && + (c->x86_mask == x->x86_mask)) + return 1; + return 0; +} + +/* To be called only after centrino_model is initialized */ +static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) +{ + int i; + + /* + * Extract clock in kHz from PERF_CTL value + * for centrino, as some DSDTs are buggy. + * Ideally, this can be done using the acpi_data structure. + */ + if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) || + (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) || + (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) { + msr = (msr >> 8) & 0xff; + return msr * 100000; + } + + if ((!per_cpu(centrino_model, cpu)) || + (!per_cpu(centrino_model, cpu)->op_points)) + return 0; + + msr &= 0xffff; + for (i = 0; + per_cpu(centrino_model, cpu)->op_points[i].frequency + != CPUFREQ_TABLE_END; + i++) { + if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data) + return per_cpu(centrino_model, cpu)-> + op_points[i].frequency; + } + if (failsafe) + return per_cpu(centrino_model, cpu)->op_points[i-1].frequency; + else + return 0; +} + +/* Return the current CPU frequency in kHz */ +static unsigned int get_cur_freq(unsigned int cpu) +{ + unsigned l, h; + unsigned clock_freq; + + rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h); + clock_freq = extract_clock(l, cpu, 0); + + if (unlikely(clock_freq == 0)) { + /* + * On some CPUs, we can see transient MSR values (which are + * not present in _PSS), while CPU is doing some automatic + * P-state transition (like TM2). Get the last freq set + * in PERF_CTL. + */ + rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h); + clock_freq = extract_clock(l, cpu, 1); + } + return clock_freq; +} + + +static int centrino_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); + unsigned l, h; + int i; + + /* Only Intel makes Enhanced Speedstep-capable CPUs */ + if (cpu->x86_vendor != X86_VENDOR_INTEL || + !cpu_has(cpu, X86_FEATURE_EST)) + return -ENODEV; + + if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) + centrino_driver.flags |= CPUFREQ_CONST_LOOPS; + + if (policy->cpu != 0) + return -ENODEV; + + for (i = 0; i < N_IDS; i++) + if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) + break; + + if (i != N_IDS) + per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i]; + + if (!per_cpu(centrino_cpu, policy->cpu)) { + pr_debug("found unsupported CPU with " + "Enhanced SpeedStep: send /proc/cpuinfo to " + MAINTAINER "\n"); + return -ENODEV; + } + + if (centrino_cpu_init_table(policy)) + return -ENODEV; + + /* Check to see if Enhanced SpeedStep is enabled, and try to + enable it if not. */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + + if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { + l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; + pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l); + wrmsr(MSR_IA32_MISC_ENABLE, l, h); + + /* check to see if it stuck */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { + printk(KERN_INFO PFX + "couldn't enable Enhanced SpeedStep\n"); + return -ENODEV; + } + } + + policy->cpuinfo.transition_latency = 10000; + /* 10uS transition latency */ + + return cpufreq_table_validate_and_show(policy, + per_cpu(centrino_model, policy->cpu)->op_points); +} + +static int centrino_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + + if (!per_cpu(centrino_model, cpu)) + return -ENODEV; + + per_cpu(centrino_model, cpu) = NULL; + + return 0; +} + +/** + * centrino_setpolicy - set a new CPUFreq policy + * @policy: new policy + * @index: index of target frequency + * + * Sets a new CPUFreq policy. + */ +static int centrino_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; + int retval = 0; + unsigned int j, first_cpu; + struct cpufreq_frequency_table *op_points; + cpumask_var_t covered_cpus; + + if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) + return -ENOMEM; + + if (unlikely(per_cpu(centrino_model, cpu) == NULL)) { + retval = -ENODEV; + goto out; + } + + first_cpu = 1; + op_points = &per_cpu(centrino_model, cpu)->op_points[index]; + for_each_cpu(j, policy->cpus) { + int good_cpu; + + /* + * Support for SMP systems. + * Make sure we are running on CPU that wants to change freq + */ + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + good_cpu = cpumask_any_and(policy->cpus, + cpu_online_mask); + else + good_cpu = j; + + if (good_cpu >= nr_cpu_ids) { + pr_debug("couldn't limit to CPUs in this domain\n"); + retval = -EAGAIN; + if (first_cpu) { + /* We haven't started the transition yet. */ + goto out; + } + break; + } + + msr = op_points->driver_data; + + if (first_cpu) { + rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); + if (msr == (oldmsr & 0xffff)) { + pr_debug("no change needed - msr was and needs " + "to be %x\n", oldmsr); + retval = 0; + goto out; + } + + first_cpu = 0; + /* all but 16 LSB are reserved, treat them with care */ + oldmsr &= ~0xffff; + msr &= 0xffff; + oldmsr |= msr; + } + + wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h); + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + break; + + cpumask_set_cpu(j, covered_cpus); + } + + if (unlikely(retval)) { + /* + * We have failed halfway through the frequency change. + * We have sent callbacks to policy->cpus and + * MSRs have already been written on coverd_cpus. + * Best effort undo.. + */ + + for_each_cpu(j, covered_cpus) + wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h); + } + retval = 0; + +out: + free_cpumask_var(covered_cpus); + return retval; +} + +static struct cpufreq_driver centrino_driver = { + .name = "centrino", /* should be speedstep-centrino, + but there's a 16 char limit */ + .init = centrino_cpu_init, + .exit = centrino_cpu_exit, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = centrino_target, + .get = get_cur_freq, + .attr = cpufreq_generic_attr, +}; + +/* + * This doesn't replace the detailed checks above because + * the generic CPU IDs don't have a way to match for steppings + * or ASCII model IDs. + */ +static const struct x86_cpu_id centrino_ids[] = { + { X86_VENDOR_INTEL, 6, 9, X86_FEATURE_EST }, + { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST }, + { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST }, + { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST }, + { X86_VENDOR_INTEL, 15, 3, X86_FEATURE_EST }, + { X86_VENDOR_INTEL, 15, 4, X86_FEATURE_EST }, + {} +}; +#if 0 +/* Autoload or not? Do not for now. */ +MODULE_DEVICE_TABLE(x86cpu, centrino_ids); +#endif + +/** + * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver + * + * Initializes the Enhanced SpeedStep support. Returns -ENODEV on + * unsupported devices, -ENOENT if there's no voltage table for this + * particular CPU model, -EINVAL on problems during initiatization, + * and zero on success. + * + * This is quite picky. Not only does the CPU have to advertise the + * "est" flag in the cpuid capability flags, we look for a specific + * CPU model and stepping, and we need to have the exact model name in + * our voltage tables. That is, be paranoid about not releasing + * someone's valuable magic smoke. + */ +static int __init centrino_init(void) +{ + if (!x86_match_cpu(centrino_ids)) + return -ENODEV; + return cpufreq_register_driver(¢rino_driver); +} + +static void __exit centrino_exit(void) +{ + cpufreq_unregister_driver(¢rino_driver); +} + +MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); +MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); +MODULE_LICENSE ("GPL"); + +late_initcall(centrino_init); +module_exit(centrino_exit); diff --git a/kernel/drivers/cpufreq/speedstep-ich.c b/kernel/drivers/cpufreq/speedstep-ich.c new file mode 100644 index 000000000..e56d632a8 --- /dev/null +++ b/kernel/drivers/cpufreq/speedstep-ich.c @@ -0,0 +1,387 @@ +/* + * (C) 2001 Dave Jones, Arjan van de ven. + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon reverse engineered information, and on Intel documentation + * for chipsets ICH2-M and ICH3-M. + * + * Many thanks to Ducrot Bruno for finding and fixing the last + * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler + * for extensive testing. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + + +/********************************************************************* + * SPEEDSTEP - DEFINITIONS * + *********************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/sched.h> + +#include <asm/cpu_device_id.h> + +#include "speedstep-lib.h" + + +/* speedstep_chipset: + * It is necessary to know which chipset is used. As accesses to + * this device occur at various places in this module, we need a + * static struct pci_dev * pointing to that device. + */ +static struct pci_dev *speedstep_chipset_dev; + + +/* speedstep_processor + */ +static enum speedstep_processor speedstep_processor; + +static u32 pmbase; + +/* + * There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +static struct cpufreq_frequency_table speedstep_freqs[] = { + {0, SPEEDSTEP_HIGH, 0}, + {0, SPEEDSTEP_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + + +/** + * speedstep_find_register - read the PMBASE address + * + * Returns: -ENODEV if no register could be found + */ +static int speedstep_find_register(void) +{ + if (!speedstep_chipset_dev) + return -ENODEV; + + /* get PMBASE */ + pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); + if (!(pmbase & 0x01)) { + printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + return -ENODEV; + } + + pmbase &= 0xFFFFFFFE; + if (!pmbase) { + printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + return -ENODEV; + } + + pr_debug("pmbase is 0x%x\n", pmbase); + return 0; +} + +/** + * speedstep_set_state - set the SpeedStep state + * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) + * + * Tries to change the SpeedStep state. Can be called from + * smp_call_function_single. + */ +static void speedstep_set_state(unsigned int state) +{ + u8 pm2_blk; + u8 value; + unsigned long flags; + + if (state > 0x1) + return; + + /* Disable IRQs */ + local_irq_save(flags); + + /* read state */ + value = inb(pmbase + 0x50); + + pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); + + /* write new state */ + value &= 0xFE; + value |= state; + + pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); + + /* Disable bus master arbitration */ + pm2_blk = inb(pmbase + 0x20); + pm2_blk |= 0x01; + outb(pm2_blk, (pmbase + 0x20)); + + /* Actual transition */ + outb(value, (pmbase + 0x50)); + + /* Restore bus master arbitration */ + pm2_blk &= 0xfe; + outb(pm2_blk, (pmbase + 0x20)); + + /* check if transition was successful */ + value = inb(pmbase + 0x50); + + /* Enable IRQs */ + local_irq_restore(flags); + + pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); + + if (state == (value & 0x1)) + pr_debug("change to %u MHz succeeded\n", + speedstep_get_frequency(speedstep_processor) / 1000); + else + printk(KERN_ERR "cpufreq: change failed - I/O error\n"); + + return; +} + +/* Wrapper for smp_call_function_single. */ +static void _speedstep_set_state(void *_state) +{ + speedstep_set_state(*(unsigned int *)_state); +} + +/** + * speedstep_activate - activate SpeedStep control in the chipset + * + * Tries to activate the SpeedStep status and control registers. + * Returns -EINVAL on an unsupported chipset, and zero on success. + */ +static int speedstep_activate(void) +{ + u16 value = 0; + + if (!speedstep_chipset_dev) + return -EINVAL; + + pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); + if (!(value & 0x08)) { + value |= 0x08; + pr_debug("activating SpeedStep (TM) registers\n"); + pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); + } + + return 0; +} + + +/** + * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic + * + * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to + * the LPC bridge / PM module which contains all power-management + * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected + * chipset, or zero on failure. + */ +static unsigned int speedstep_detect_chipset(void) +{ + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801DB_12, + PCI_ANY_ID, PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) + return 4; /* 4-M */ + + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801CA_12, + PCI_ANY_ID, PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) + return 3; /* 3-M */ + + + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801BA_10, + PCI_ANY_ID, PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) { + /* speedstep.c causes lockups on Dell Inspirons 8000 and + * 8100 which use a pretty old revision of the 82815 + * host bridge. Abort on these systems. + */ + static struct pci_dev *hostbridge; + + hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82815_MC, + PCI_ANY_ID, PCI_ANY_ID, + NULL); + + if (!hostbridge) + return 2; /* 2-M */ + + if (hostbridge->revision < 5) { + pr_debug("hostbridge does not support speedstep\n"); + speedstep_chipset_dev = NULL; + pci_dev_put(hostbridge); + return 0; + } + + pci_dev_put(hostbridge); + return 2; /* 2-M */ + } + + return 0; +} + +static void get_freq_data(void *_speed) +{ + unsigned int *speed = _speed; + + *speed = speedstep_get_frequency(speedstep_processor); +} + +static unsigned int speedstep_get(unsigned int cpu) +{ + unsigned int speed; + + /* You're supposed to ensure CPU is online. */ + if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0) + BUG(); + + pr_debug("detected %u kHz as current frequency\n", speed); + return speed; +} + +/** + * speedstep_target - set a new CPUFreq policy + * @policy: new policy + * @index: index of target frequency + * + * Sets a new CPUFreq policy. + */ +static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int policy_cpu; + + policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); + + smp_call_function_single(policy_cpu, _speedstep_set_state, &index, + true); + + return 0; +} + + +struct get_freqs { + struct cpufreq_policy *policy; + int ret; +}; + +static void get_freqs_on_cpu(void *_get_freqs) +{ + struct get_freqs *get_freqs = _get_freqs; + + get_freqs->ret = + speedstep_get_freqs(speedstep_processor, + &speedstep_freqs[SPEEDSTEP_LOW].frequency, + &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + &get_freqs->policy->cpuinfo.transition_latency, + &speedstep_set_state); +} + +static int speedstep_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int policy_cpu; + struct get_freqs gf; + + /* only run on CPU to be set, or on its sibling */ +#ifdef CONFIG_SMP + cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); +#endif + policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); + + /* detect low and high frequency and transition latency */ + gf.policy = policy; + smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1); + if (gf.ret) + return gf.ret; + + return cpufreq_table_validate_and_show(policy, speedstep_freqs); +} + + +static struct cpufreq_driver speedstep_driver = { + .name = "speedstep-ich", + .verify = cpufreq_generic_frequency_table_verify, + .target_index = speedstep_target, + .init = speedstep_cpu_init, + .get = speedstep_get, + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id ss_smi_ids[] = { + { X86_VENDOR_INTEL, 6, 0xb, }, + { X86_VENDOR_INTEL, 6, 0x8, }, + { X86_VENDOR_INTEL, 15, 2 }, + {} +}; +#if 0 +/* Autoload or not? Do not for now. */ +MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids); +#endif + +/** + * speedstep_init - initializes the SpeedStep CPUFreq driver + * + * Initializes the SpeedStep support. Returns -ENODEV on unsupported + * devices, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init speedstep_init(void) +{ + if (!x86_match_cpu(ss_smi_ids)) + return -ENODEV; + + /* detect processor */ + speedstep_processor = speedstep_detect_processor(); + if (!speedstep_processor) { + pr_debug("Intel(R) SpeedStep(TM) capable processor " + "not found\n"); + return -ENODEV; + } + + /* detect chipset */ + if (!speedstep_detect_chipset()) { + pr_debug("Intel(R) SpeedStep(TM) for this chipset not " + "(yet) available.\n"); + return -ENODEV; + } + + /* activate speedstep support */ + if (speedstep_activate()) { + pci_dev_put(speedstep_chipset_dev); + return -EINVAL; + } + + if (speedstep_find_register()) + return -ENODEV; + + return cpufreq_register_driver(&speedstep_driver); +} + + +/** + * speedstep_exit - unregisters SpeedStep support + * + * Unregisters SpeedStep support. + */ +static void __exit speedstep_exit(void) +{ + pci_dev_put(speedstep_chipset_dev); + cpufreq_unregister_driver(&speedstep_driver); +} + + +MODULE_AUTHOR("Dave Jones, Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " + "with ICH-M southbridges."); +MODULE_LICENSE("GPL"); + +module_init(speedstep_init); +module_exit(speedstep_exit); diff --git a/kernel/drivers/cpufreq/speedstep-lib.c b/kernel/drivers/cpufreq/speedstep-lib.c new file mode 100644 index 000000000..4ab7a2156 --- /dev/null +++ b/kernel/drivers/cpufreq/speedstep-lib.c @@ -0,0 +1,482 @@ +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Library for common functions for Intel SpeedStep v.1 and v.2 support + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> + +#include <asm/msr.h> +#include <asm/tsc.h> +#include "speedstep-lib.h" + +#define PFX "speedstep-lib: " + +#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK +static int relaxed_check; +#else +#define relaxed_check 0 +#endif + +/********************************************************************* + * GET PROCESSOR CORE SPEED IN KHZ * + *********************************************************************/ + +static unsigned int pentium3_get_frequency(enum speedstep_processor processor) +{ + /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ + struct { + unsigned int ratio; /* Frequency Multiplier (x10) */ + u8 bitmap; /* power on configuration bits + [27, 25:22] (in MSR 0x2a) */ + } msr_decode_mult[] = { + { 30, 0x01 }, + { 35, 0x05 }, + { 40, 0x02 }, + { 45, 0x06 }, + { 50, 0x00 }, + { 55, 0x04 }, + { 60, 0x0b }, + { 65, 0x0f }, + { 70, 0x09 }, + { 75, 0x0d }, + { 80, 0x0a }, + { 85, 0x26 }, + { 90, 0x20 }, + { 100, 0x2b }, + { 0, 0xff } /* error or unknown value */ + }; + + /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ + struct { + unsigned int value; /* Front Side Bus speed in MHz */ + u8 bitmap; /* power on configuration bits [18: 19] + (in MSR 0x2a) */ + } msr_decode_fsb[] = { + { 66, 0x0 }, + { 100, 0x2 }, + { 133, 0x1 }, + { 0, 0xff} + }; + + u32 msr_lo, msr_tmp; + int i = 0, j = 0; + + /* read MSR 0x2a - we only need the low 32 bits */ + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + msr_tmp = msr_lo; + + /* decode the FSB */ + msr_tmp &= 0x00c0000; + msr_tmp >>= 18; + while (msr_tmp != msr_decode_fsb[i].bitmap) { + if (msr_decode_fsb[i].bitmap == 0xff) + return 0; + i++; + } + + /* decode the multiplier */ + if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { + pr_debug("workaround for early PIIIs\n"); + msr_lo &= 0x03c00000; + } else + msr_lo &= 0x0bc00000; + msr_lo >>= 22; + while (msr_lo != msr_decode_mult[j].bitmap) { + if (msr_decode_mult[j].bitmap == 0xff) + return 0; + j++; + } + + pr_debug("speed is %u\n", + (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); + + return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; +} + + +static unsigned int pentiumM_get_frequency(void) +{ + u32 msr_lo, msr_tmp; + + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + + /* see table B-2 of 24547212.pdf */ + if (msr_lo & 0x00040000) { + printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", + msr_lo, msr_tmp); + return 0; + } + + msr_tmp = (msr_lo >> 22) & 0x1f; + pr_debug("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * 100 * 1000)); + + return msr_tmp * 100 * 1000; +} + +static unsigned int pentium_core_get_frequency(void) +{ + u32 fsb = 0; + u32 msr_lo, msr_tmp; + int ret; + + rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); + /* see table B-2 of 25366920.pdf */ + switch (msr_lo & 0x07) { + case 5: + fsb = 100000; + break; + case 1: + fsb = 133333; + break; + case 3: + fsb = 166667; + break; + case 2: + fsb = 200000; + break; + case 0: + fsb = 266667; + break; + case 4: + fsb = 333333; + break; + default: + printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); + } + + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", + msr_lo, msr_tmp); + + msr_tmp = (msr_lo >> 22) & 0x1f; + pr_debug("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * fsb)); + + ret = (msr_tmp * fsb); + return ret; +} + + +static unsigned int pentium4_get_frequency(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + u32 msr_lo, msr_hi, mult; + unsigned int fsb = 0; + unsigned int ret; + u8 fsb_code; + + /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency + * to System Bus Frequency Ratio Field in the Processor Frequency + * Configuration Register of the MSR. Therefore the current + * frequency cannot be calculated and has to be measured. + */ + if (c->x86_model < 2) + return cpu_khz; + + rdmsr(0x2c, msr_lo, msr_hi); + + pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); + + /* decode the FSB: see IA-32 Intel (C) Architecture Software + * Developer's Manual, Volume 3: System Prgramming Guide, + * revision #12 in Table B-1: MSRs in the Pentium 4 and + * Intel Xeon Processors, on page B-4 and B-5. + */ + fsb_code = (msr_lo >> 16) & 0x7; + switch (fsb_code) { + case 0: + fsb = 100 * 1000; + break; + case 1: + fsb = 13333 * 10; + break; + case 2: + fsb = 200 * 1000; + break; + } + + if (!fsb) + printk(KERN_DEBUG PFX "couldn't detect FSB speed. " + "Please send an e-mail to <linux@brodo.de>\n"); + + /* Multiplier. */ + mult = msr_lo >> 24; + + pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", + fsb, mult, (fsb * mult)); + + ret = (fsb * mult); + return ret; +} + + +/* Warning: may get called from smp_call_function_single. */ +unsigned int speedstep_get_frequency(enum speedstep_processor processor) +{ + switch (processor) { + case SPEEDSTEP_CPU_PCORE: + return pentium_core_get_frequency(); + case SPEEDSTEP_CPU_PM: + return pentiumM_get_frequency(); + case SPEEDSTEP_CPU_P4D: + case SPEEDSTEP_CPU_P4M: + return pentium4_get_frequency(); + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: + return pentium3_get_frequency(processor); + default: + return 0; + }; + return 0; +} +EXPORT_SYMBOL_GPL(speedstep_get_frequency); + + +/********************************************************************* + * DETECT SPEEDSTEP-CAPABLE PROCESSOR * + *********************************************************************/ + +/* Keep in sync with the x86_cpu_id tables in the different modules */ +unsigned int speedstep_detect_processor(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + u32 ebx, msr_lo, msr_hi; + + pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model); + + if ((c->x86_vendor != X86_VENDOR_INTEL) || + ((c->x86 != 6) && (c->x86 != 0xF))) + return 0; + + if (c->x86 == 0xF) { + /* Intel Mobile Pentium 4-M + * or Intel Mobile Pentium 4 with 533 MHz FSB */ + if (c->x86_model != 2) + return 0; + + ebx = cpuid_ebx(0x00000001); + ebx &= 0x000000FF; + + pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); + + switch (c->x86_mask) { + case 4: + /* + * B-stepping [M-P4-M] + * sample has ebx = 0x0f, production has 0x0e. + */ + if ((ebx == 0x0e) || (ebx == 0x0f)) + return SPEEDSTEP_CPU_P4M; + break; + case 7: + /* + * C-stepping [M-P4-M] + * needs to have ebx=0x0e, else it's a celeron: + * cf. 25130917.pdf / page 7, footnote 5 even + * though 25072120.pdf / page 7 doesn't say + * samples are only of B-stepping... + */ + if (ebx == 0x0e) + return SPEEDSTEP_CPU_P4M; + break; + case 9: + /* + * D-stepping [M-P4-M or M-P4/533] + * + * this is totally strange: CPUID 0x0F29 is + * used by M-P4-M, M-P4/533 and(!) Celeron CPUs. + * The latter need to be sorted out as they don't + * support speedstep. + * Celerons with CPUID 0x0F29 may have either + * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything + * specific. + * M-P4-Ms may have either ebx=0xe or 0xf [see above] + * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] + * also, M-P4M HTs have ebx=0x8, too + * For now, they are distinguished by the model_id + * string + */ + if ((ebx == 0x0e) || + (strstr(c->x86_model_id, + "Mobile Intel(R) Pentium(R) 4") != NULL)) + return SPEEDSTEP_CPU_P4M; + break; + default: + break; + } + return 0; + } + + switch (c->x86_model) { + case 0x0B: /* Intel PIII [Tualatin] */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, + * 0x06 for mobile PIII-M */ + ebx = cpuid_ebx(0x00000001); + pr_debug("ebx is %x\n", ebx); + + ebx &= 0x000000FF; + + if (ebx != 0x06) + return 0; + + /* So far all PIII-M processors support SpeedStep. See + * Intel's 24540640.pdf of June 2003 + */ + return SPEEDSTEP_CPU_PIII_T; + + case 0x08: /* Intel PIII [Coppermine] */ + + /* all mobile PIII Coppermines have FSB 100 MHz + * ==> sort out a few desktop PIIIs. */ + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); + pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", + msr_lo, msr_hi); + msr_lo &= 0x00c0000; + if (msr_lo != 0x0080000) + return 0; + + /* + * If the processor is a mobile version, + * platform ID has bit 50 set + * it has SpeedStep technology if either + * bit 56 or 57 is set + */ + rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); + pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", + msr_lo, msr_hi); + if ((msr_hi & (1<<18)) && + (relaxed_check ? 1 : (msr_hi & (3<<24)))) { + if (c->x86_mask == 0x01) { + pr_debug("early PIII version\n"); + return SPEEDSTEP_CPU_PIII_C_EARLY; + } else + return SPEEDSTEP_CPU_PIII_C; + } + + default: + return 0; + } +} +EXPORT_SYMBOL_GPL(speedstep_detect_processor); + + +/********************************************************************* + * DETECT SPEEDSTEP SPEEDS * + *********************************************************************/ + +unsigned int speedstep_get_freqs(enum speedstep_processor processor, + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)) +{ + unsigned int prev_speed; + unsigned int ret = 0; + unsigned long flags; + struct timeval tv1, tv2; + + if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) + return -EINVAL; + + pr_debug("trying to determine both speeds\n"); + + /* get current speed */ + prev_speed = speedstep_get_frequency(processor); + if (!prev_speed) + return -EIO; + + pr_debug("previous speed is %u\n", prev_speed); + + preempt_disable(); + local_irq_save(flags); + + /* switch to low state */ + set_state(SPEEDSTEP_LOW); + *low_speed = speedstep_get_frequency(processor); + if (!*low_speed) { + ret = -EIO; + goto out; + } + + pr_debug("low speed is %u\n", *low_speed); + + /* start latency measurement */ + if (transition_latency) + do_gettimeofday(&tv1); + + /* switch to high state */ + set_state(SPEEDSTEP_HIGH); + + /* end latency measurement */ + if (transition_latency) + do_gettimeofday(&tv2); + + *high_speed = speedstep_get_frequency(processor); + if (!*high_speed) { + ret = -EIO; + goto out; + } + + pr_debug("high speed is %u\n", *high_speed); + + if (*low_speed == *high_speed) { + ret = -ENODEV; + goto out; + } + + /* switch to previous state, if necessary */ + if (*high_speed != prev_speed) + set_state(SPEEDSTEP_LOW); + + if (transition_latency) { + *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC + + tv2.tv_usec - tv1.tv_usec; + pr_debug("transition latency is %u uSec\n", *transition_latency); + + /* convert uSec to nSec and add 20% for safety reasons */ + *transition_latency *= 1200; + + /* check if the latency measurement is too high or too low + * and set it to a safe value (500uSec) in that case + */ + if (*transition_latency > 10000000 || + *transition_latency < 50000) { + printk(KERN_WARNING PFX "frequency transition " + "measured seems out of range (%u " + "nSec), falling back to a safe one of" + "%u nSec.\n", + *transition_latency, 500000); + *transition_latency = 500000; + } + } + +out: + local_irq_restore(flags); + preempt_enable(); + + return ret; +} +EXPORT_SYMBOL_GPL(speedstep_get_freqs); + +#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK +module_param(relaxed_check, int, 0444); +MODULE_PARM_DESC(relaxed_check, + "Don't do all checks for speedstep capability."); +#endif + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/cpufreq/speedstep-lib.h b/kernel/drivers/cpufreq/speedstep-lib.h new file mode 100644 index 000000000..70d9cea12 --- /dev/null +++ b/kernel/drivers/cpufreq/speedstep-lib.h @@ -0,0 +1,49 @@ +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Library for common functions for Intel SpeedStep v.1 and v.2 support + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + + + +/* processors */ +enum speedstep_processor { + SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001, /* Coppermine core */ + SPEEDSTEP_CPU_PIII_C = 0x00000002, /* Coppermine core */ + SPEEDSTEP_CPU_PIII_T = 0x00000003, /* Tualatin core */ + SPEEDSTEP_CPU_P4M = 0x00000004, /* P4-M */ +/* the following processors are not speedstep-capable and are not auto-detected + * in speedstep_detect_processor(). However, their speed can be detected using + * the speedstep_get_frequency() call. */ + SPEEDSTEP_CPU_PM = 0xFFFFFF03, /* Pentium M */ + SPEEDSTEP_CPU_P4D = 0xFFFFFF04, /* desktop P4 */ + SPEEDSTEP_CPU_PCORE = 0xFFFFFF05, /* Core */ +}; + +/* speedstep states -- only two of them */ + +#define SPEEDSTEP_HIGH 0x00000000 +#define SPEEDSTEP_LOW 0x00000001 + + +/* detect a speedstep-capable processor */ +extern enum speedstep_processor speedstep_detect_processor(void); + +/* detect the current speed (in khz) of the processor */ +extern unsigned int speedstep_get_frequency(enum speedstep_processor processor); + + +/* detect the low and high speeds of the processor. The callback + * set_state"'s first argument is either SPEEDSTEP_HIGH or + * SPEEDSTEP_LOW; the second argument is zero so that no + * cpufreq_notify_transition calls are initiated. + */ +extern unsigned int speedstep_get_freqs(enum speedstep_processor processor, + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)); diff --git a/kernel/drivers/cpufreq/speedstep-smi.c b/kernel/drivers/cpufreq/speedstep-smi.c new file mode 100644 index 000000000..819229e82 --- /dev/null +++ b/kernel/drivers/cpufreq/speedstep-smi.c @@ -0,0 +1,396 @@ +/* + * Intel SpeedStep SMI driver. + * + * (C) 2003 Hiroshi Miura <miura@da-cha.org> + * + * Licensed under the terms of the GNU GPL License version 2. + * + */ + + +/********************************************************************* + * SPEEDSTEP - DEFINITIONS * + *********************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <asm/ist.h> +#include <asm/cpu_device_id.h> + +#include "speedstep-lib.h" + +/* speedstep system management interface port/command. + * + * These parameters are got from IST-SMI BIOS call. + * If user gives it, these are used. + * + */ +static int smi_port; +static int smi_cmd; +static unsigned int smi_sig; + +/* info about the processor */ +static enum speedstep_processor speedstep_processor; + +/* + * There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +static struct cpufreq_frequency_table speedstep_freqs[] = { + {0, SPEEDSTEP_HIGH, 0}, + {0, SPEEDSTEP_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +#define GET_SPEEDSTEP_OWNER 0 +#define GET_SPEEDSTEP_STATE 1 +#define SET_SPEEDSTEP_STATE 2 +#define GET_SPEEDSTEP_FREQS 4 + +/* how often shall the SMI call be tried if it failed, e.g. because + * of DMA activity going on? */ +#define SMI_TRIES 5 + +/** + * speedstep_smi_ownership + */ +static int speedstep_smi_ownership(void) +{ + u32 command, result, magic, dummy; + u32 function = GET_SPEEDSTEP_OWNER; + unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation"; + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + magic = virt_to_phys(magic_data); + + pr_debug("trying to obtain ownership with command %x at port %x\n", + command, smi_port); + + __asm__ __volatile__( + "push %%ebp\n" + "out %%al, (%%dx)\n" + "pop %%ebp\n" + : "=D" (result), + "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), + "=S" (dummy) + : "a" (command), "b" (function), "c" (0), "d" (smi_port), + "D" (0), "S" (magic) + : "memory" + ); + + pr_debug("result is %x\n", result); + + return result; +} + +/** + * speedstep_smi_get_freqs - get SpeedStep preferred & current freq. + * @low: the low frequency value is placed here + * @high: the high frequency value is placed here + * + * Only available on later SpeedStep-enabled systems, returns false results or + * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing + * shows that the latter occurs if !(ist_info.event & 0xFFFF). + */ +static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high) +{ + u32 command, result = 0, edi, high_mhz, low_mhz, dummy; + u32 state = 0; + u32 function = GET_SPEEDSTEP_FREQS; + + if (!(ist_info.event & 0xFFFF)) { + pr_debug("bug #1422 -- can't read freqs from BIOS\n"); + return -ENODEV; + } + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + + pr_debug("trying to determine frequencies with command %x at port %x\n", + command, smi_port); + + __asm__ __volatile__( + "push %%ebp\n" + "out %%al, (%%dx)\n" + "pop %%ebp" + : "=a" (result), + "=b" (high_mhz), + "=c" (low_mhz), + "=d" (state), "=D" (edi), "=S" (dummy) + : "a" (command), + "b" (function), + "c" (state), + "d" (smi_port), "S" (0), "D" (0) + ); + + pr_debug("result %x, low_freq %u, high_freq %u\n", + result, low_mhz, high_mhz); + + /* abort if results are obviously incorrect... */ + if ((high_mhz + low_mhz) < 600) + return -EINVAL; + + *high = high_mhz * 1000; + *low = low_mhz * 1000; + + return result; +} + +/** + * speedstep_set_state - set the SpeedStep state + * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) + * + */ +static void speedstep_set_state(unsigned int state) +{ + unsigned int result = 0, command, new_state, dummy; + unsigned long flags; + unsigned int function = SET_SPEEDSTEP_STATE; + unsigned int retry = 0; + + if (state > 0x1) + return; + + /* Disable IRQs */ + preempt_disable(); + local_irq_save(flags); + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + + pr_debug("trying to set frequency to state %u " + "with command %x at port %x\n", + state, command, smi_port); + + do { + if (retry) { + /* + * We need to enable interrupts, otherwise the blockage + * won't resolve. + * + * We disable preemption so that other processes don't + * run. If other processes were running, they could + * submit more DMA requests, making the blockage worse. + */ + pr_debug("retry %u, previous result %u, waiting...\n", + retry, result); + local_irq_enable(); + mdelay(retry * 50); + local_irq_disable(); + } + retry++; + __asm__ __volatile__( + "push %%ebp\n" + "out %%al, (%%dx)\n" + "pop %%ebp" + : "=b" (new_state), "=D" (result), + "=c" (dummy), "=a" (dummy), + "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (state), + "d" (smi_port), "S" (0), "D" (0) + ); + } while ((new_state != state) && (retry <= SMI_TRIES)); + + /* enable IRQs */ + local_irq_restore(flags); + preempt_enable(); + + if (new_state == state) + pr_debug("change to %u MHz succeeded after %u tries " + "with result %u\n", + (speedstep_freqs[new_state].frequency / 1000), + retry, result); + else + printk(KERN_ERR "cpufreq: change to state %u " + "failed with new_state %u and result %u\n", + state, new_state, result); + + return; +} + + +/** + * speedstep_target - set a new CPUFreq policy + * @policy: new policy + * @index: index of new freq + * + * Sets a new CPUFreq policy/freq. + */ +static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) +{ + speedstep_set_state(index); + + return 0; +} + + +static int speedstep_cpu_init(struct cpufreq_policy *policy) +{ + int result; + unsigned int *low, *high; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + result = speedstep_smi_ownership(); + if (result) { + pr_debug("fails in acquiring ownership of a SMI interface.\n"); + return -EINVAL; + } + + /* detect low and high frequency */ + low = &speedstep_freqs[SPEEDSTEP_LOW].frequency; + high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency; + + result = speedstep_smi_get_freqs(low, high); + if (result) { + /* fall back to speedstep_lib.c dection mechanism: + * try both states out */ + pr_debug("could not detect low and high frequencies " + "by SMI call.\n"); + result = speedstep_get_freqs(speedstep_processor, + low, high, + NULL, + &speedstep_set_state); + + if (result) { + pr_debug("could not detect two different speeds" + " -- aborting.\n"); + return result; + } else + pr_debug("workaround worked.\n"); + } + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + return cpufreq_table_validate_and_show(policy, speedstep_freqs); +} + +static unsigned int speedstep_get(unsigned int cpu) +{ + if (cpu) + return -ENODEV; + return speedstep_get_frequency(speedstep_processor); +} + + +static int speedstep_resume(struct cpufreq_policy *policy) +{ + int result = speedstep_smi_ownership(); + + if (result) + pr_debug("fails in re-acquiring ownership of a SMI interface.\n"); + + return result; +} + +static struct cpufreq_driver speedstep_driver = { + .name = "speedstep-smi", + .verify = cpufreq_generic_frequency_table_verify, + .target_index = speedstep_target, + .init = speedstep_cpu_init, + .get = speedstep_get, + .resume = speedstep_resume, + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id ss_smi_ids[] = { + { X86_VENDOR_INTEL, 6, 0xb, }, + { X86_VENDOR_INTEL, 6, 0x8, }, + { X86_VENDOR_INTEL, 15, 2 }, + {} +}; +#if 0 +/* Not auto loaded currently */ +MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids); +#endif + +/** + * speedstep_init - initializes the SpeedStep CPUFreq driver + * + * Initializes the SpeedStep support. Returns -ENODEV on unsupported + * BIOS, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init speedstep_init(void) +{ + if (!x86_match_cpu(ss_smi_ids)) + return -ENODEV; + + speedstep_processor = speedstep_detect_processor(); + + switch (speedstep_processor) { + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: + break; + default: + speedstep_processor = 0; + } + + if (!speedstep_processor) { + pr_debug("No supported Intel CPU detected.\n"); + return -ENODEV; + } + + pr_debug("signature:0x%.8x, command:0x%.8x, " + "event:0x%.8x, perf_level:0x%.8x.\n", + ist_info.signature, ist_info.command, + ist_info.event, ist_info.perf_level); + + /* Error if no IST-SMI BIOS or no PARM + sig= 'ISGE' aka 'Intel Speedstep Gate E' */ + if ((ist_info.signature != 0x47534943) && ( + (smi_port == 0) || (smi_cmd == 0))) + return -ENODEV; + + if (smi_sig == 1) + smi_sig = 0x47534943; + else + smi_sig = ist_info.signature; + + /* setup smi_port from MODLULE_PARM or BIOS */ + if ((smi_port > 0xff) || (smi_port < 0)) + return -EINVAL; + else if (smi_port == 0) + smi_port = ist_info.command & 0xff; + + if ((smi_cmd > 0xff) || (smi_cmd < 0)) + return -EINVAL; + else if (smi_cmd == 0) + smi_cmd = (ist_info.command >> 16) & 0xff; + + return cpufreq_register_driver(&speedstep_driver); +} + + +/** + * speedstep_exit - unregisters SpeedStep support + * + * Unregisters SpeedStep support. + */ +static void __exit speedstep_exit(void) +{ + cpufreq_unregister_driver(&speedstep_driver); +} + +module_param(smi_port, int, 0444); +module_param(smi_cmd, int, 0444); +module_param(smi_sig, uint, 0444); + +MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value " + "-- Intel's default setting is 0xb2"); +MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value " + "-- Intel's default setting is 0x82"); +MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the " + "SMI interface."); + +MODULE_AUTHOR("Hiroshi Miura"); +MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface."); +MODULE_LICENSE("GPL"); + +module_init(speedstep_init); +module_exit(speedstep_exit); diff --git a/kernel/drivers/cpufreq/tegra-cpufreq.c b/kernel/drivers/cpufreq/tegra-cpufreq.c new file mode 100644 index 000000000..8084c7f7e --- /dev/null +++ b/kernel/drivers/cpufreq/tegra-cpufreq.c @@ -0,0 +1,218 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross <ccross@google.com> + * Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> + +static struct cpufreq_frequency_table freq_table[] = { + { .frequency = 216000 }, + { .frequency = 312000 }, + { .frequency = 456000 }, + { .frequency = 608000 }, + { .frequency = 760000 }, + { .frequency = 816000 }, + { .frequency = 912000 }, + { .frequency = 1000000 }, + { .frequency = CPUFREQ_TABLE_END }, +}; + +#define NUM_CPUS 2 + +static struct clk *cpu_clk; +static struct clk *pll_x_clk; +static struct clk *pll_p_clk; +static struct clk *emc_clk; +static bool pll_x_prepared; + +static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000; + + /* + * Don't switch to intermediate freq if: + * - we are already at it, i.e. policy->cur == ifreq + * - index corresponds to ifreq + */ + if ((freq_table[index].frequency == ifreq) || (policy->cur == ifreq)) + return 0; + + return ifreq; +} + +static int tegra_target_intermediate(struct cpufreq_policy *policy, + unsigned int index) +{ + int ret; + + /* + * Take an extra reference to the main pll so it doesn't turn + * off when we move the cpu off of it as enabling it again while we + * switch to it from tegra_target() would take additional time. + * + * When target-freq is equal to intermediate freq we don't need to + * switch to an intermediate freq and so this routine isn't called. + * Also, we wouldn't be using pll_x anymore and must not take extra + * reference to it, as it can be disabled now to save some power. + */ + clk_prepare_enable(pll_x_clk); + + ret = clk_set_parent(cpu_clk, pll_p_clk); + if (ret) + clk_disable_unprepare(pll_x_clk); + else + pll_x_prepared = true; + + return ret; +} + +static int tegra_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned long rate = freq_table[index].frequency; + unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000; + int ret = 0; + + /* + * Vote on memory bus frequency based on cpu frequency + * This sets the minimum frequency, display or avp may request higher + */ + if (rate >= 816000) + clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */ + else if (rate >= 456000) + clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */ + else + clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */ + + /* + * target freq == pll_p, don't need to take extra reference to pll_x_clk + * as it isn't used anymore. + */ + if (rate == ifreq) + return clk_set_parent(cpu_clk, pll_p_clk); + + ret = clk_set_rate(pll_x_clk, rate * 1000); + /* Restore to earlier frequency on error, i.e. pll_x */ + if (ret) + pr_err("Failed to change pll_x to %lu\n", rate); + + ret = clk_set_parent(cpu_clk, pll_x_clk); + /* This shouldn't fail while changing or restoring */ + WARN_ON(ret); + + /* + * Drop count to pll_x clock only if we switched to intermediate freq + * earlier while transitioning to a target frequency. + */ + if (pll_x_prepared) { + clk_disable_unprepare(pll_x_clk); + pll_x_prepared = false; + } + + return ret; +} + +static int tegra_cpu_init(struct cpufreq_policy *policy) +{ + int ret; + + if (policy->cpu >= NUM_CPUS) + return -EINVAL; + + clk_prepare_enable(emc_clk); + clk_prepare_enable(cpu_clk); + + /* FIXME: what's the actual transition time? */ + ret = cpufreq_generic_init(policy, freq_table, 300 * 1000); + if (ret) { + clk_disable_unprepare(cpu_clk); + clk_disable_unprepare(emc_clk); + return ret; + } + + policy->clk = cpu_clk; + policy->suspend_freq = freq_table[0].frequency; + return 0; +} + +static int tegra_cpu_exit(struct cpufreq_policy *policy) +{ + clk_disable_unprepare(cpu_clk); + clk_disable_unprepare(emc_clk); + return 0; +} + +static struct cpufreq_driver tegra_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .get_intermediate = tegra_get_intermediate, + .target_intermediate = tegra_target_intermediate, + .target_index = tegra_target, + .get = cpufreq_generic_get, + .init = tegra_cpu_init, + .exit = tegra_cpu_exit, + .name = "tegra", + .attr = cpufreq_generic_attr, +#ifdef CONFIG_PM + .suspend = cpufreq_generic_suspend, +#endif +}; + +static int __init tegra_cpufreq_init(void) +{ + cpu_clk = clk_get_sys(NULL, "cclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + pll_x_clk = clk_get_sys(NULL, "pll_x"); + if (IS_ERR(pll_x_clk)) + return PTR_ERR(pll_x_clk); + + pll_p_clk = clk_get_sys(NULL, "pll_p"); + if (IS_ERR(pll_p_clk)) + return PTR_ERR(pll_p_clk); + + emc_clk = clk_get_sys("cpu", "emc"); + if (IS_ERR(emc_clk)) { + clk_put(cpu_clk); + return PTR_ERR(emc_clk); + } + + return cpufreq_register_driver(&tegra_cpufreq_driver); +} + +static void __exit tegra_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&tegra_cpufreq_driver); + clk_put(emc_clk); + clk_put(cpu_clk); +} + + +MODULE_AUTHOR("Colin Cross <ccross@android.com>"); +MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2"); +MODULE_LICENSE("GPL"); +module_init(tegra_cpufreq_init); +module_exit(tegra_cpufreq_exit); diff --git a/kernel/drivers/cpufreq/unicore2-cpufreq.c b/kernel/drivers/cpufreq/unicore2-cpufreq.c new file mode 100644 index 000000000..6f9dfa805 --- /dev/null +++ b/kernel/drivers/cpufreq/unicore2-cpufreq.c @@ -0,0 +1,80 @@ +/* + * clock scaling for the UniCore-II + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> + * Copyright (C) 2001-2010 Guan Xuetao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> + +#include <mach/hardware.h> + +static struct cpufreq_driver ucv2_driver; + +/* make sure that only the "userspace" governor is run + * -- anything else wouldn't make sense on this platform, anyway. + */ +static int ucv2_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu) + return -EINVAL; + + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +static int ucv2_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + int ret; + + freqs.old = policy->cur; + freqs.new = target_freq; + + cpufreq_freq_transition_begin(policy, &freqs); + ret = clk_set_rate(policy->clk, target_freq * 1000); + cpufreq_freq_transition_end(policy, &freqs, ret); + + return ret; +} + +static int __init ucv2_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + policy->min = policy->cpuinfo.min_freq = 250000; + policy->max = policy->cpuinfo.max_freq = 1000000; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->clk = clk_get(NULL, "MAIN_CLK"); + return PTR_ERR_OR_ZERO(policy->clk); +} + +static struct cpufreq_driver ucv2_driver = { + .flags = CPUFREQ_STICKY, + .verify = ucv2_verify_speed, + .target = ucv2_target, + .get = cpufreq_generic_get, + .init = ucv2_cpu_init, + .name = "UniCore-II", +}; + +static int __init ucv2_cpufreq_init(void) +{ + return cpufreq_register_driver(&ucv2_driver); +} + +arch_initcall(ucv2_cpufreq_init); diff --git a/kernel/drivers/cpufreq/vexpress-spc-cpufreq.c b/kernel/drivers/cpufreq/vexpress-spc-cpufreq.c new file mode 100644 index 000000000..433e93fd4 --- /dev/null +++ b/kernel/drivers/cpufreq/vexpress-spc-cpufreq.c @@ -0,0 +1,69 @@ +/* + * Versatile Express SPC CPUFreq Interface driver + * + * It provides necessary ops to arm_big_little cpufreq driver. + * + * Copyright (C) 2013 ARM Ltd. + * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/types.h> + +#include "arm_big_little.h" + +static int ve_spc_init_opp_table(struct device *cpu_dev) +{ + /* + * platform specific SPC code must initialise the opp table + * so just check if the OPP count is non-zero + */ + return dev_pm_opp_get_opp_count(cpu_dev) <= 0; +} + +static int ve_spc_get_transition_latency(struct device *cpu_dev) +{ + return 1000000; /* 1 ms */ +} + +static struct cpufreq_arm_bL_ops ve_spc_cpufreq_ops = { + .name = "vexpress-spc", + .get_transition_latency = ve_spc_get_transition_latency, + .init_opp_table = ve_spc_init_opp_table, +}; + +static int ve_spc_cpufreq_probe(struct platform_device *pdev) +{ + return bL_cpufreq_register(&ve_spc_cpufreq_ops); +} + +static int ve_spc_cpufreq_remove(struct platform_device *pdev) +{ + bL_cpufreq_unregister(&ve_spc_cpufreq_ops); + return 0; +} + +static struct platform_driver ve_spc_cpufreq_platdrv = { + .driver = { + .name = "vexpress-spc-cpufreq", + }, + .probe = ve_spc_cpufreq_probe, + .remove = ve_spc_cpufreq_remove, +}; +module_platform_driver(ve_spc_cpufreq_platdrv); + +MODULE_LICENSE("GPL"); |