summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/cpufreq/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/cpufreq/Kconfig')
-rw-r--r--kernel/drivers/cpufreq/Kconfig305
1 files changed, 305 insertions, 0 deletions
diff --git a/kernel/drivers/cpufreq/Kconfig b/kernel/drivers/cpufreq/Kconfig
new file mode 100644
index 000000000..659879a56
--- /dev/null
+++ b/kernel/drivers/cpufreq/Kconfig
@@ -0,0 +1,305 @@
+menu "CPU Frequency scaling"
+
+config CPU_FREQ
+ bool "CPU Frequency scaling"
+ select SRCU
+ help
+ CPU Frequency scaling allows you to change the clock speed of
+ CPUs on the fly. This is a nice method to save power, because
+ the lower the CPU clock speed, the less power the CPU consumes.
+
+ Note that this driver doesn't automatically change the CPU
+ clock speed, you need to either enable a dynamic cpufreq governor
+ (see below) after boot, or use a userspace tool.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+if CPU_FREQ
+
+config CPU_FREQ_GOV_COMMON
+ bool
+
+config CPU_FREQ_BOOST_SW
+ bool
+ depends on THERMAL
+
+config CPU_FREQ_STAT
+ tristate "CPU frequency translation statistics"
+ default y
+ help
+ This driver exports CPU frequency statistics information through sysfs
+ file system.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpufreq_stats.
+
+ If in doubt, say N.
+
+config CPU_FREQ_STAT_DETAILS
+ bool "CPU frequency translation statistics details"
+ depends on CPU_FREQ_STAT
+ help
+ This will show detail CPU frequency translation table in sysfs file
+ system.
+
+ If in doubt, say N.
+
+choice
+ prompt "Default CPUFreq governor"
+ default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ
+ default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+ help
+ This option sets which CPUFreq governor shall be loaded at
+ startup. If in doubt, select 'performance'.
+
+config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+ bool "performance"
+ select CPU_FREQ_GOV_PERFORMANCE
+ help
+ Use the CPUFreq governor 'performance' as default. This sets
+ the frequency statically to the highest frequency supported by
+ the CPU.
+
+config CPU_FREQ_DEFAULT_GOV_POWERSAVE
+ bool "powersave"
+ select CPU_FREQ_GOV_POWERSAVE
+ help
+ Use the CPUFreq governor 'powersave' as default. This sets
+ the frequency statically to the lowest frequency supported by
+ the CPU.
+
+config CPU_FREQ_DEFAULT_GOV_USERSPACE
+ bool "userspace"
+ select CPU_FREQ_GOV_USERSPACE
+ help
+ Use the CPUFreq governor 'userspace' as default. This allows
+ you to set the CPU frequency manually or when a userspace
+ program shall be able to set the CPU dynamically without having
+ to enable the userspace governor manually.
+
+config CPU_FREQ_DEFAULT_GOV_ONDEMAND
+ bool "ondemand"
+ select CPU_FREQ_GOV_ONDEMAND
+ select CPU_FREQ_GOV_PERFORMANCE
+ help
+ Use the CPUFreq governor 'ondemand' as default. This allows
+ you to get a full dynamic frequency capable system by simply
+ loading your cpufreq low-level hardware driver.
+ Be aware that not all cpufreq drivers support the ondemand
+ governor. If unsure have a look at the help section of the
+ driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
+ bool "conservative"
+ select CPU_FREQ_GOV_CONSERVATIVE
+ select CPU_FREQ_GOV_PERFORMANCE
+ help
+ Use the CPUFreq governor 'conservative' as default. This allows
+ you to get a full dynamic frequency capable system by simply
+ loading your cpufreq low-level hardware driver.
+ Be aware that not all cpufreq drivers support the conservative
+ governor. If unsure have a look at the help section of the
+ driver. Fallback governor will be the performance governor.
+endchoice
+
+config CPU_FREQ_GOV_PERFORMANCE
+ tristate "'performance' governor"
+ help
+ This cpufreq governor sets the frequency statically to the
+ highest available CPU frequency.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpufreq_performance.
+
+ If in doubt, say Y.
+
+config CPU_FREQ_GOV_POWERSAVE
+ tristate "'powersave' governor"
+ help
+ This cpufreq governor sets the frequency statically to the
+ lowest available CPU frequency.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpufreq_powersave.
+
+ If in doubt, say Y.
+
+config CPU_FREQ_GOV_USERSPACE
+ tristate "'userspace' governor for userspace frequency scaling"
+ help
+ Enable this cpufreq governor when you either want to set the
+ CPU frequency manually or when a userspace program shall
+ be able to set the CPU dynamically, like on LART
+ <http://www.lartmaker.nl/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpufreq_userspace.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say Y.
+
+config CPU_FREQ_GOV_ONDEMAND
+ tristate "'ondemand' cpufreq policy governor"
+ select CPU_FREQ_GOV_COMMON
+ help
+ 'ondemand' - This driver adds a dynamic cpufreq policy governor.
+ The governor does a periodic polling and
+ changes frequency based on the CPU utilization.
+ The support for this governor depends on CPU capability to
+ do fast frequency switching (i.e, very low latency frequency
+ transitions).
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpufreq_ondemand.
+
+ For details, take a look at linux/Documentation/cpu-freq.
+
+ If in doubt, say N.
+
+config CPU_FREQ_GOV_CONSERVATIVE
+ tristate "'conservative' cpufreq governor"
+ depends on CPU_FREQ
+ select CPU_FREQ_GOV_COMMON
+ help
+ 'conservative' - this driver is rather similar to the 'ondemand'
+ governor both in its source code and its purpose, the difference is
+ its optimisation for better suitability in a battery powered
+ environment. The frequency is gracefully increased and decreased
+ rather than jumping to 100% when speed is required.
+
+ If you have a desktop machine then you should really be considering
+ the 'ondemand' governor instead, however if you are using a laptop,
+ PDA or even an AMD64 based computer (due to the unacceptable
+ step-by-step latency issues between the minimum and maximum frequency
+ transitions in the CPU) you will probably want to use this governor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpufreq_conservative.
+
+ For details, take a look at linux/Documentation/cpu-freq.
+
+ If in doubt, say N.
+
+comment "CPU frequency scaling drivers"
+
+config CPUFREQ_DT
+ tristate "Generic DT based cpufreq driver"
+ depends on HAVE_CLK && OF
+ # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
+ depends on !CPU_THERMAL || THERMAL
+ select PM_OPP
+ help
+ This adds a generic DT based cpufreq driver for frequency management.
+ It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
+ systems which share clock and voltage across all CPUs.
+
+ If in doubt, say N.
+
+if X86
+source "drivers/cpufreq/Kconfig.x86"
+endif
+
+if ARM || ARM64
+source "drivers/cpufreq/Kconfig.arm"
+endif
+
+if PPC32 || PPC64
+source "drivers/cpufreq/Kconfig.powerpc"
+endif
+
+if AVR32
+config AVR32_AT32AP_CPUFREQ
+ bool "CPU frequency driver for AT32AP"
+ depends on PLATFORM_AT32AP
+ default n
+ help
+ This enables the CPU frequency driver for AT32AP processors.
+ If in doubt, say N.
+endif
+
+if IA64
+config IA64_ACPI_CPUFREQ
+ tristate "ACPI Processor P-States driver"
+ depends on ACPI_PROCESSOR
+ help
+ This driver adds a CPUFreq driver which utilizes the ACPI
+ Processor Performance States.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+endif
+
+if MIPS
+config LOONGSON2_CPUFREQ
+ tristate "Loongson2 CPUFreq Driver"
+ help
+ This option adds a CPUFreq driver for loongson processors which
+ support software configurable cpu frequency.
+
+ Loongson2F and it's successors support this feature.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+config LOONGSON1_CPUFREQ
+ tristate "Loongson1 CPUFreq Driver"
+ help
+ This option adds a CPUFreq driver for loongson1 processors which
+ support software configurable cpu frequency.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+endif
+
+if SPARC64
+config SPARC_US3_CPUFREQ
+ tristate "UltraSPARC-III CPU Frequency driver"
+ help
+ This adds the CPUFreq driver for UltraSPARC-III processors.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config SPARC_US2E_CPUFREQ
+ tristate "UltraSPARC-IIe CPU Frequency driver"
+ help
+ This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+endif
+
+if SUPERH
+config SH_CPU_FREQ
+ tristate "SuperH CPU Frequency driver"
+ help
+ This adds the cpufreq driver for SuperH. Any CPU that supports
+ clock rate rounding through the clock framework can use this
+ driver. While it will make the kernel slightly larger, this is
+ harmless for CPUs that don't support rate rounding. The driver
+ will also generate a notice in the boot log before disabling
+ itself if the CPU in question is not capable of rate rounding.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If unsure, say N.
+endif
+
+config QORIQ_CPUFREQ
+ tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
+ depends on OF && COMMON_CLK && (PPC_E500MC || ARM)
+ select CLK_QORIQ
+ help
+ This adds the CPUFreq driver support for Freescale QorIQ SoCs
+ which are capable of changing the CPU's frequency dynamically.
+
+endif
+endmenu