diff options
Diffstat (limited to 'kernel/drivers/char/tpm/tpm_infineon.c')
| -rw-r--r-- | kernel/drivers/char/tpm/tpm_infineon.c | 629 |
1 files changed, 629 insertions, 0 deletions
diff --git a/kernel/drivers/char/tpm/tpm_infineon.c b/kernel/drivers/char/tpm/tpm_infineon.c new file mode 100644 index 000000000..6c488e635 --- /dev/null +++ b/kernel/drivers/char/tpm/tpm_infineon.c @@ -0,0 +1,629 @@ +/* + * Description: + * Device Driver for the Infineon Technologies + * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module + * Specifications at www.trustedcomputinggroup.org + * + * Copyright (C) 2005, Marcel Selhorst <tpmdd@selhorst.net> + * Sirrix AG - security technologies <tpmdd@sirrix.com> and + * Applied Data Security Group, Ruhr-University Bochum, Germany + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + */ + +#include <linux/init.h> +#include <linux/pnp.h> +#include "tpm.h" + +/* Infineon specific definitions */ +/* maximum number of WTX-packages */ +#define TPM_MAX_WTX_PACKAGES 50 +/* msleep-Time for WTX-packages */ +#define TPM_WTX_MSLEEP_TIME 20 +/* msleep-Time --> Interval to check status register */ +#define TPM_MSLEEP_TIME 3 +/* gives number of max. msleep()-calls before throwing timeout */ +#define TPM_MAX_TRIES 5000 +#define TPM_INFINEON_DEV_VEN_VALUE 0x15D1 + +#define TPM_INF_IO_PORT 0x0 +#define TPM_INF_IO_MEM 0x1 + +#define TPM_INF_ADDR 0x0 +#define TPM_INF_DATA 0x1 + +struct tpm_inf_dev { + int iotype; + + void __iomem *mem_base; /* MMIO ioremap'd addr */ + unsigned long map_base; /* phys MMIO base */ + unsigned long map_size; /* MMIO region size */ + unsigned int index_off; /* index register offset */ + + unsigned int data_regs; /* Data registers */ + unsigned int data_size; + + unsigned int config_port; /* IO Port config index reg */ + unsigned int config_size; +}; + +static struct tpm_inf_dev tpm_dev; + +static inline void tpm_data_out(unsigned char data, unsigned char offset) +{ + if (tpm_dev.iotype == TPM_INF_IO_PORT) + outb(data, tpm_dev.data_regs + offset); + else + writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset); +} + +static inline unsigned char tpm_data_in(unsigned char offset) +{ + if (tpm_dev.iotype == TPM_INF_IO_PORT) + return inb(tpm_dev.data_regs + offset); + else + return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset); +} + +static inline void tpm_config_out(unsigned char data, unsigned char offset) +{ + if (tpm_dev.iotype == TPM_INF_IO_PORT) + outb(data, tpm_dev.config_port + offset); + else + writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset); +} + +static inline unsigned char tpm_config_in(unsigned char offset) +{ + if (tpm_dev.iotype == TPM_INF_IO_PORT) + return inb(tpm_dev.config_port + offset); + else + return readb(tpm_dev.mem_base + tpm_dev.index_off + offset); +} + +/* TPM header definitions */ +enum infineon_tpm_header { + TPM_VL_VER = 0x01, + TPM_VL_CHANNEL_CONTROL = 0x07, + TPM_VL_CHANNEL_PERSONALISATION = 0x0A, + TPM_VL_CHANNEL_TPM = 0x0B, + TPM_VL_CONTROL = 0x00, + TPM_INF_NAK = 0x15, + TPM_CTRL_WTX = 0x10, + TPM_CTRL_WTX_ABORT = 0x18, + TPM_CTRL_WTX_ABORT_ACK = 0x18, + TPM_CTRL_ERROR = 0x20, + TPM_CTRL_CHAININGACK = 0x40, + TPM_CTRL_CHAINING = 0x80, + TPM_CTRL_DATA = 0x04, + TPM_CTRL_DATA_CHA = 0x84, + TPM_CTRL_DATA_CHA_ACK = 0xC4 +}; + +enum infineon_tpm_register { + WRFIFO = 0x00, + RDFIFO = 0x01, + STAT = 0x02, + CMD = 0x03 +}; + +enum infineon_tpm_command_bits { + CMD_DIS = 0x00, + CMD_LP = 0x01, + CMD_RES = 0x02, + CMD_IRQC = 0x06 +}; + +enum infineon_tpm_status_bits { + STAT_XFE = 0x00, + STAT_LPA = 0x01, + STAT_FOK = 0x02, + STAT_TOK = 0x03, + STAT_IRQA = 0x06, + STAT_RDA = 0x07 +}; + +/* some outgoing values */ +enum infineon_tpm_values { + CHIP_ID1 = 0x20, + CHIP_ID2 = 0x21, + TPM_DAR = 0x30, + RESET_LP_IRQC_DISABLE = 0x41, + ENABLE_REGISTER_PAIR = 0x55, + IOLIMH = 0x60, + IOLIML = 0x61, + DISABLE_REGISTER_PAIR = 0xAA, + IDVENL = 0xF1, + IDVENH = 0xF2, + IDPDL = 0xF3, + IDPDH = 0xF4 +}; + +static int number_of_wtx; + +static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) +{ + int status; + int check = 0; + int i; + + if (clear_wrfifo) { + for (i = 0; i < 4096; i++) { + status = tpm_data_in(WRFIFO); + if (status == 0xff) { + if (check == 5) + break; + else + check++; + } + } + } + /* Note: The values which are currently in the FIFO of the TPM + are thrown away since there is no usage for them. Usually, + this has nothing to say, since the TPM will give its answer + immediately or will be aborted anyway, so the data here is + usually garbage and useless. + We have to clean this, because the next communication with + the TPM would be rubbish, if there is still some old data + in the Read FIFO. + */ + i = 0; + do { + status = tpm_data_in(RDFIFO); + status = tpm_data_in(STAT); + i++; + if (i == TPM_MAX_TRIES) + return -EIO; + } while ((status & (1 << STAT_RDA)) != 0); + return 0; +} + +static int wait(struct tpm_chip *chip, int wait_for_bit) +{ + int status; + int i; + for (i = 0; i < TPM_MAX_TRIES; i++) { + status = tpm_data_in(STAT); + /* check the status-register if wait_for_bit is set */ + if (status & 1 << wait_for_bit) + break; + msleep(TPM_MSLEEP_TIME); + } + if (i == TPM_MAX_TRIES) { /* timeout occurs */ + if (wait_for_bit == STAT_XFE) + dev_err(chip->pdev, "Timeout in wait(STAT_XFE)\n"); + if (wait_for_bit == STAT_RDA) + dev_err(chip->pdev, "Timeout in wait(STAT_RDA)\n"); + return -EIO; + } + return 0; +}; + +static void wait_and_send(struct tpm_chip *chip, u8 sendbyte) +{ + wait(chip, STAT_XFE); + tpm_data_out(sendbyte, WRFIFO); +} + + /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more + calculation time, it sends a WTX-package, which has to be acknowledged + or aborted. This usually occurs if you are hammering the TPM with key + creation. Set the maximum number of WTX-packages in the definitions + above, if the number is reached, the waiting-time will be denied + and the TPM command has to be resend. + */ + +static void tpm_wtx(struct tpm_chip *chip) +{ + number_of_wtx++; + dev_info(chip->pdev, "Granting WTX (%02d / %02d)\n", + number_of_wtx, TPM_MAX_WTX_PACKAGES); + wait_and_send(chip, TPM_VL_VER); + wait_and_send(chip, TPM_CTRL_WTX); + wait_and_send(chip, 0x00); + wait_and_send(chip, 0x00); + msleep(TPM_WTX_MSLEEP_TIME); +} + +static void tpm_wtx_abort(struct tpm_chip *chip) +{ + dev_info(chip->pdev, "Aborting WTX\n"); + wait_and_send(chip, TPM_VL_VER); + wait_and_send(chip, TPM_CTRL_WTX_ABORT); + wait_and_send(chip, 0x00); + wait_and_send(chip, 0x00); + number_of_wtx = 0; + msleep(TPM_WTX_MSLEEP_TIME); +} + +static int tpm_inf_recv(struct tpm_chip *chip, u8 * buf, size_t count) +{ + int i; + int ret; + u32 size = 0; + number_of_wtx = 0; + +recv_begin: + /* start receiving header */ + for (i = 0; i < 4; i++) { + ret = wait(chip, STAT_RDA); + if (ret) + return -EIO; + buf[i] = tpm_data_in(RDFIFO); + } + + if (buf[0] != TPM_VL_VER) { + dev_err(chip->pdev, + "Wrong transport protocol implementation!\n"); + return -EIO; + } + + if (buf[1] == TPM_CTRL_DATA) { + /* size of the data received */ + size = ((buf[2] << 8) | buf[3]); + + for (i = 0; i < size; i++) { + wait(chip, STAT_RDA); + buf[i] = tpm_data_in(RDFIFO); + } + + if ((size == 0x6D00) && (buf[1] == 0x80)) { + dev_err(chip->pdev, "Error handling on vendor layer!\n"); + return -EIO; + } + + for (i = 0; i < size; i++) + buf[i] = buf[i + 6]; + + size = size - 6; + return size; + } + + if (buf[1] == TPM_CTRL_WTX) { + dev_info(chip->pdev, "WTX-package received\n"); + if (number_of_wtx < TPM_MAX_WTX_PACKAGES) { + tpm_wtx(chip); + goto recv_begin; + } else { + tpm_wtx_abort(chip); + goto recv_begin; + } + } + + if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) { + dev_info(chip->pdev, "WTX-abort acknowledged\n"); + return size; + } + + if (buf[1] == TPM_CTRL_ERROR) { + dev_err(chip->pdev, "ERROR-package received:\n"); + if (buf[4] == TPM_INF_NAK) + dev_err(chip->pdev, + "-> Negative acknowledgement" + " - retransmit command!\n"); + return -EIO; + } + return -EIO; +} + +static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count) +{ + int i; + int ret; + u8 count_high, count_low, count_4, count_3, count_2, count_1; + + /* Disabling Reset, LP and IRQC */ + tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); + + ret = empty_fifo(chip, 1); + if (ret) { + dev_err(chip->pdev, "Timeout while clearing FIFO\n"); + return -EIO; + } + + ret = wait(chip, STAT_XFE); + if (ret) + return -EIO; + + count_4 = (count & 0xff000000) >> 24; + count_3 = (count & 0x00ff0000) >> 16; + count_2 = (count & 0x0000ff00) >> 8; + count_1 = (count & 0x000000ff); + count_high = ((count + 6) & 0xffffff00) >> 8; + count_low = ((count + 6) & 0x000000ff); + + /* Sending Header */ + wait_and_send(chip, TPM_VL_VER); + wait_and_send(chip, TPM_CTRL_DATA); + wait_and_send(chip, count_high); + wait_and_send(chip, count_low); + + /* Sending Data Header */ + wait_and_send(chip, TPM_VL_VER); + wait_and_send(chip, TPM_VL_CHANNEL_TPM); + wait_and_send(chip, count_4); + wait_and_send(chip, count_3); + wait_and_send(chip, count_2); + wait_and_send(chip, count_1); + + /* Sending Data */ + for (i = 0; i < count; i++) { + wait_and_send(chip, buf[i]); + } + return count; +} + +static void tpm_inf_cancel(struct tpm_chip *chip) +{ + /* + Since we are using the legacy mode to communicate + with the TPM, we have no cancel functions, but have + a workaround for interrupting the TPM through WTX. + */ +} + +static u8 tpm_inf_status(struct tpm_chip *chip) +{ + return tpm_data_in(STAT); +} + +static const struct tpm_class_ops tpm_inf = { + .recv = tpm_inf_recv, + .send = tpm_inf_send, + .cancel = tpm_inf_cancel, + .status = tpm_inf_status, + .req_complete_mask = 0, + .req_complete_val = 0, +}; + +static const struct pnp_device_id tpm_inf_pnp_tbl[] = { + /* Infineon TPMs */ + {"IFX0101", 0}, + {"IFX0102", 0}, + {"", 0} +}; + +MODULE_DEVICE_TABLE(pnp, tpm_inf_pnp_tbl); + +static int tpm_inf_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) +{ + int rc = 0; + u8 iol, ioh; + int vendorid[2]; + int version[2]; + int productid[2]; + char chipname[20]; + struct tpm_chip *chip; + + /* read IO-ports through PnP */ + if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && + !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) { + + tpm_dev.iotype = TPM_INF_IO_PORT; + + tpm_dev.config_port = pnp_port_start(dev, 0); + tpm_dev.config_size = pnp_port_len(dev, 0); + tpm_dev.data_regs = pnp_port_start(dev, 1); + tpm_dev.data_size = pnp_port_len(dev, 1); + if ((tpm_dev.data_size < 4) || (tpm_dev.config_size < 2)) { + rc = -EINVAL; + goto err_last; + } + dev_info(&dev->dev, "Found %s with ID %s\n", + dev->name, dev_id->id); + if (!((tpm_dev.data_regs >> 8) & 0xff)) { + rc = -EINVAL; + goto err_last; + } + /* publish my base address and request region */ + if (request_region(tpm_dev.data_regs, tpm_dev.data_size, + "tpm_infineon0") == NULL) { + rc = -EINVAL; + goto err_last; + } + if (request_region(tpm_dev.config_port, tpm_dev.config_size, + "tpm_infineon0") == NULL) { + release_region(tpm_dev.data_regs, tpm_dev.data_size); + rc = -EINVAL; + goto err_last; + } + } else if (pnp_mem_valid(dev, 0) && + !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) { + + tpm_dev.iotype = TPM_INF_IO_MEM; + + tpm_dev.map_base = pnp_mem_start(dev, 0); + tpm_dev.map_size = pnp_mem_len(dev, 0); + + dev_info(&dev->dev, "Found %s with ID %s\n", + dev->name, dev_id->id); + + /* publish my base address and request region */ + if (request_mem_region(tpm_dev.map_base, tpm_dev.map_size, + "tpm_infineon0") == NULL) { + rc = -EINVAL; + goto err_last; + } + + tpm_dev.mem_base = ioremap(tpm_dev.map_base, tpm_dev.map_size); + if (tpm_dev.mem_base == NULL) { + release_mem_region(tpm_dev.map_base, tpm_dev.map_size); + rc = -EINVAL; + goto err_last; + } + + /* + * The only known MMIO based Infineon TPM system provides + * a single large mem region with the device config + * registers at the default TPM_ADDR. The data registers + * seem like they could be placed anywhere within the MMIO + * region, but lets just put them at zero offset. + */ + tpm_dev.index_off = TPM_ADDR; + tpm_dev.data_regs = 0x0; + } else { + rc = -EINVAL; + goto err_last; + } + + /* query chip for its vendor, its version number a.s.o. */ + tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); + tpm_config_out(IDVENL, TPM_INF_ADDR); + vendorid[1] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(IDVENH, TPM_INF_ADDR); + vendorid[0] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(IDPDL, TPM_INF_ADDR); + productid[1] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(IDPDH, TPM_INF_ADDR); + productid[0] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(CHIP_ID1, TPM_INF_ADDR); + version[1] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(CHIP_ID2, TPM_INF_ADDR); + version[0] = tpm_config_in(TPM_INF_DATA); + + switch ((productid[0] << 8) | productid[1]) { + case 6: + snprintf(chipname, sizeof(chipname), " (SLD 9630 TT 1.1)"); + break; + case 11: + snprintf(chipname, sizeof(chipname), " (SLB 9635 TT 1.2)"); + break; + default: + snprintf(chipname, sizeof(chipname), " (unknown chip)"); + break; + } + + if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) { + + /* configure TPM with IO-ports */ + tpm_config_out(IOLIMH, TPM_INF_ADDR); + tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA); + tpm_config_out(IOLIML, TPM_INF_ADDR); + tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA); + + /* control if IO-ports are set correctly */ + tpm_config_out(IOLIMH, TPM_INF_ADDR); + ioh = tpm_config_in(TPM_INF_DATA); + tpm_config_out(IOLIML, TPM_INF_ADDR); + iol = tpm_config_in(TPM_INF_DATA); + + if ((ioh << 8 | iol) != tpm_dev.data_regs) { + dev_err(&dev->dev, + "Could not set IO-data registers to 0x%x\n", + tpm_dev.data_regs); + rc = -EIO; + goto err_release_region; + } + + /* activate register */ + tpm_config_out(TPM_DAR, TPM_INF_ADDR); + tpm_config_out(0x01, TPM_INF_DATA); + tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); + + /* disable RESET, LP and IRQC */ + tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); + + /* Finally, we're done, print some infos */ + dev_info(&dev->dev, "TPM found: " + "config base 0x%lx, " + "data base 0x%lx, " + "chip version 0x%02x%02x, " + "vendor id 0x%x%x (Infineon), " + "product id 0x%02x%02x" + "%s\n", + tpm_dev.iotype == TPM_INF_IO_PORT ? + tpm_dev.config_port : + tpm_dev.map_base + tpm_dev.index_off, + tpm_dev.iotype == TPM_INF_IO_PORT ? + tpm_dev.data_regs : + tpm_dev.map_base + tpm_dev.data_regs, + version[0], version[1], + vendorid[0], vendorid[1], + productid[0], productid[1], chipname); + + chip = tpmm_chip_alloc(&dev->dev, &tpm_inf); + if (IS_ERR(chip)) { + rc = PTR_ERR(chip); + goto err_release_region; + } + + rc = tpm_chip_register(chip); + if (rc) + goto err_release_region; + + return 0; + } else { + rc = -ENODEV; + goto err_release_region; + } + +err_release_region: + if (tpm_dev.iotype == TPM_INF_IO_PORT) { + release_region(tpm_dev.data_regs, tpm_dev.data_size); + release_region(tpm_dev.config_port, tpm_dev.config_size); + } else { + iounmap(tpm_dev.mem_base); + release_mem_region(tpm_dev.map_base, tpm_dev.map_size); + } + +err_last: + return rc; +} + +static void tpm_inf_pnp_remove(struct pnp_dev *dev) +{ + struct tpm_chip *chip = pnp_get_drvdata(dev); + + tpm_chip_unregister(chip); + + if (tpm_dev.iotype == TPM_INF_IO_PORT) { + release_region(tpm_dev.data_regs, tpm_dev.data_size); + release_region(tpm_dev.config_port, + tpm_dev.config_size); + } else { + iounmap(tpm_dev.mem_base); + release_mem_region(tpm_dev.map_base, tpm_dev.map_size); + } +} + +#ifdef CONFIG_PM_SLEEP +static int tpm_inf_resume(struct device *dev) +{ + /* Re-configure TPM after suspending */ + tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); + tpm_config_out(IOLIMH, TPM_INF_ADDR); + tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA); + tpm_config_out(IOLIML, TPM_INF_ADDR); + tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA); + /* activate register */ + tpm_config_out(TPM_DAR, TPM_INF_ADDR); + tpm_config_out(0x01, TPM_INF_DATA); + tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); + /* disable RESET, LP and IRQC */ + tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); + return tpm_pm_resume(dev); +} +#endif +static SIMPLE_DEV_PM_OPS(tpm_inf_pm, tpm_pm_suspend, tpm_inf_resume); + +static struct pnp_driver tpm_inf_pnp_driver = { + .name = "tpm_inf_pnp", + .id_table = tpm_inf_pnp_tbl, + .probe = tpm_inf_pnp_probe, + .remove = tpm_inf_pnp_remove, + .driver = { + .pm = &tpm_inf_pm, + } +}; + +module_pnp_driver(tpm_inf_pnp_driver); + +MODULE_AUTHOR("Marcel Selhorst <tpmdd@sirrix.com>"); +MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); +MODULE_VERSION("1.9.2"); +MODULE_LICENSE("GPL"); |