diff options
Diffstat (limited to 'kernel/drivers/char/ipmi')
| -rw-r--r-- | kernel/drivers/char/ipmi/Kconfig | 90 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/Makefile | 13 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_bt_sm.c | 705 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_devintf.c | 992 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_kcs_sm.c | 551 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_msghandler.c | 4615 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_powernv.c | 311 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_poweroff.c | 749 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_si_intf.c | 3874 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_si_sm.h | 141 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_smic_sm.c | 600 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_ssif.c | 2017 | ||||
| -rw-r--r-- | kernel/drivers/char/ipmi/ipmi_watchdog.c | 1385 |
13 files changed, 16043 insertions, 0 deletions
diff --git a/kernel/drivers/char/ipmi/Kconfig b/kernel/drivers/char/ipmi/Kconfig new file mode 100644 index 000000000..6ed9e9fe5 --- /dev/null +++ b/kernel/drivers/char/ipmi/Kconfig @@ -0,0 +1,90 @@ +# +# IPMI device configuration +# + +menuconfig IPMI_HANDLER + tristate 'IPMI top-level message handler' + depends on HAS_IOMEM + help + This enables the central IPMI message handler, required for IPMI + to work. + + IPMI is a standard for managing sensors (temperature, + voltage, etc.) in a system. + + See <file:Documentation/IPMI.txt> for more details on the driver. + + If unsure, say N. + +if IPMI_HANDLER + +config IPMI_PANIC_EVENT + bool 'Generate a panic event to all BMCs on a panic' + help + When a panic occurs, this will cause the IPMI message handler to + generate an IPMI event describing the panic to each interface + registered with the message handler. + +config IPMI_PANIC_STRING + bool 'Generate OEM events containing the panic string' + depends on IPMI_PANIC_EVENT + help + When a panic occurs, this will cause the IPMI message handler to + generate IPMI OEM type f0 events holding the IPMB address of the + panic generator (byte 4 of the event), a sequence number for the + string (byte 5 of the event) and part of the string (the rest of the + event). Bytes 1, 2, and 3 are the normal usage for an OEM event. + You can fetch these events and use the sequence numbers to piece the + string together. + +config IPMI_DEVICE_INTERFACE + tristate 'Device interface for IPMI' + help + This provides an IOCTL interface to the IPMI message handler so + userland processes may use IPMI. It supports poll() and select(). + +config IPMI_SI + tristate 'IPMI System Interface handler' + help + Provides a driver for System Interfaces (KCS, SMIC, BT). + Currently, only KCS and SMIC are supported. If + you are using IPMI, you should probably say "y" here. + +config IPMI_SI_PROBE_DEFAULTS + bool 'Probe for all possible IPMI system interfaces by default' + default n + depends on IPMI_SI + help + Modern systems will usually expose IPMI interfaces via a discoverable + firmware mechanism such as ACPI or DMI. Older systems do not, and so + the driver is forced to probe hardware manually. This may cause boot + delays. Say "n" here to disable this manual probing. IPMI will then + only be available on older systems if the "ipmi_si_intf.trydefaults=1" + boot argument is passed. + +config IPMI_SSIF + tristate 'IPMI SMBus handler (SSIF)' + select I2C + help + Provides a driver for a SMBus interface to a BMC, meaning that you + have a driver that must be accessed over an I2C bus instead of a + standard interface. This module requires I2C support. + +config IPMI_POWERNV + depends on PPC_POWERNV + tristate 'POWERNV (OPAL firmware) IPMI interface' + help + Provides a driver for OPAL firmware-based IPMI interfaces. + +config IPMI_WATCHDOG + tristate 'IPMI Watchdog Timer' + help + This enables the IPMI watchdog timer. + +config IPMI_POWEROFF + tristate 'IPMI Poweroff' + help + This enables a function to power off the system with IPMI if + the IPMI management controller is capable of this. + +endif # IPMI_HANDLER diff --git a/kernel/drivers/char/ipmi/Makefile b/kernel/drivers/char/ipmi/Makefile new file mode 100644 index 000000000..f3ffde1f5 --- /dev/null +++ b/kernel/drivers/char/ipmi/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the ipmi drivers. +# + +ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o + +obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o +obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o +obj-$(CONFIG_IPMI_SI) += ipmi_si.o +obj-$(CONFIG_IPMI_SSIF) += ipmi_ssif.o +obj-$(CONFIG_IPMI_POWERNV) += ipmi_powernv.o +obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o +obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o diff --git a/kernel/drivers/char/ipmi/ipmi_bt_sm.c b/kernel/drivers/char/ipmi/ipmi_bt_sm.c new file mode 100644 index 000000000..61e716166 --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_bt_sm.c @@ -0,0 +1,705 @@ +/* + * ipmi_bt_sm.c + * + * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part + * of the driver architecture at http://sourceforge.net/projects/openipmi + * + * Author: Rocky Craig <first.last@hp.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include <linux/kernel.h> /* For printk. */ +#include <linux/string.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/ipmi_msgdefs.h> /* for completion codes */ +#include "ipmi_si_sm.h" + +#define BT_DEBUG_OFF 0 /* Used in production */ +#define BT_DEBUG_ENABLE 1 /* Generic messages */ +#define BT_DEBUG_MSG 2 /* Prints all request/response buffers */ +#define BT_DEBUG_STATES 4 /* Verbose look at state changes */ +/* + * BT_DEBUG_OFF must be zero to correspond to the default uninitialized + * value + */ + +static int bt_debug; /* 0 == BT_DEBUG_OFF */ + +module_param(bt_debug, int, 0644); +MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); + +/* + * Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds, + * and 64 byte buffers. However, one HP implementation wants 255 bytes of + * buffer (with a documented message of 160 bytes) so go for the max. + * Since the Open IPMI architecture is single-message oriented at this + * stage, the queue depth of BT is of no concern. + */ + +#define BT_NORMAL_TIMEOUT 5 /* seconds */ +#define BT_NORMAL_RETRY_LIMIT 2 +#define BT_RESET_DELAY 6 /* seconds after warm reset */ + +/* + * States are written in chronological order and usually cover + * multiple rows of the state table discussion in the IPMI spec. + */ + +enum bt_states { + BT_STATE_IDLE = 0, /* Order is critical in this list */ + BT_STATE_XACTION_START, + BT_STATE_WRITE_BYTES, + BT_STATE_WRITE_CONSUME, + BT_STATE_READ_WAIT, + BT_STATE_CLEAR_B2H, + BT_STATE_READ_BYTES, + BT_STATE_RESET1, /* These must come last */ + BT_STATE_RESET2, + BT_STATE_RESET3, + BT_STATE_RESTART, + BT_STATE_PRINTME, + BT_STATE_CAPABILITIES_BEGIN, + BT_STATE_CAPABILITIES_END, + BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */ +}; + +/* + * Macros seen at the end of state "case" blocks. They help with legibility + * and debugging. + */ + +#define BT_STATE_CHANGE(X, Y) { bt->state = X; return Y; } + +#define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; } + +struct si_sm_data { + enum bt_states state; + unsigned char seq; /* BT sequence number */ + struct si_sm_io *io; + unsigned char write_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */ + int write_count; + unsigned char read_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */ + int read_count; + int truncated; + long timeout; /* microseconds countdown */ + int error_retries; /* end of "common" fields */ + int nonzero_status; /* hung BMCs stay all 0 */ + enum bt_states complete; /* to divert the state machine */ + int BT_CAP_outreqs; + long BT_CAP_req2rsp; + int BT_CAP_retries; /* Recommended retries */ +}; + +#define BT_CLR_WR_PTR 0x01 /* See IPMI 1.5 table 11.6.4 */ +#define BT_CLR_RD_PTR 0x02 +#define BT_H2B_ATN 0x04 +#define BT_B2H_ATN 0x08 +#define BT_SMS_ATN 0x10 +#define BT_OEM0 0x20 +#define BT_H_BUSY 0x40 +#define BT_B_BUSY 0x80 + +/* + * Some bits are toggled on each write: write once to set it, once + * more to clear it; writing a zero does nothing. To absolutely + * clear it, check its state and write if set. This avoids the "get + * current then use as mask" scheme to modify one bit. Note that the + * variable "bt" is hardcoded into these macros. + */ + +#define BT_STATUS bt->io->inputb(bt->io, 0) +#define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x) + +#define BMC2HOST bt->io->inputb(bt->io, 1) +#define HOST2BMC(x) bt->io->outputb(bt->io, 1, x) + +#define BT_INTMASK_R bt->io->inputb(bt->io, 2) +#define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x) + +/* + * Convenience routines for debugging. These are not multi-open safe! + * Note the macros have hardcoded variables in them. + */ + +static char *state2txt(unsigned char state) +{ + switch (state) { + case BT_STATE_IDLE: return("IDLE"); + case BT_STATE_XACTION_START: return("XACTION"); + case BT_STATE_WRITE_BYTES: return("WR_BYTES"); + case BT_STATE_WRITE_CONSUME: return("WR_CONSUME"); + case BT_STATE_READ_WAIT: return("RD_WAIT"); + case BT_STATE_CLEAR_B2H: return("CLEAR_B2H"); + case BT_STATE_READ_BYTES: return("RD_BYTES"); + case BT_STATE_RESET1: return("RESET1"); + case BT_STATE_RESET2: return("RESET2"); + case BT_STATE_RESET3: return("RESET3"); + case BT_STATE_RESTART: return("RESTART"); + case BT_STATE_LONG_BUSY: return("LONG_BUSY"); + case BT_STATE_CAPABILITIES_BEGIN: return("CAP_BEGIN"); + case BT_STATE_CAPABILITIES_END: return("CAP_END"); + } + return("BAD STATE"); +} +#define STATE2TXT state2txt(bt->state) + +static char *status2txt(unsigned char status) +{ + /* + * This cannot be called by two threads at the same time and + * the buffer is always consumed immediately, so the static is + * safe to use. + */ + static char buf[40]; + + strcpy(buf, "[ "); + if (status & BT_B_BUSY) + strcat(buf, "B_BUSY "); + if (status & BT_H_BUSY) + strcat(buf, "H_BUSY "); + if (status & BT_OEM0) + strcat(buf, "OEM0 "); + if (status & BT_SMS_ATN) + strcat(buf, "SMS "); + if (status & BT_B2H_ATN) + strcat(buf, "B2H "); + if (status & BT_H2B_ATN) + strcat(buf, "H2B "); + strcat(buf, "]"); + return buf; +} +#define STATUS2TXT status2txt(status) + +/* called externally at insmod time, and internally on cleanup */ + +static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io) +{ + memset(bt, 0, sizeof(struct si_sm_data)); + if (bt->io != io) { + /* external: one-time only things */ + bt->io = io; + bt->seq = 0; + } + bt->state = BT_STATE_IDLE; /* start here */ + bt->complete = BT_STATE_IDLE; /* end here */ + bt->BT_CAP_req2rsp = BT_NORMAL_TIMEOUT * USEC_PER_SEC; + bt->BT_CAP_retries = BT_NORMAL_RETRY_LIMIT; + /* BT_CAP_outreqs == zero is a flag to read BT Capabilities */ + return 3; /* We claim 3 bytes of space; ought to check SPMI table */ +} + +/* Jam a completion code (probably an error) into a response */ + +static void force_result(struct si_sm_data *bt, unsigned char completion_code) +{ + bt->read_data[0] = 4; /* # following bytes */ + bt->read_data[1] = bt->write_data[1] | 4; /* Odd NetFn/LUN */ + bt->read_data[2] = bt->write_data[2]; /* seq (ignored) */ + bt->read_data[3] = bt->write_data[3]; /* Command */ + bt->read_data[4] = completion_code; + bt->read_count = 5; +} + +/* The upper state machine starts here */ + +static int bt_start_transaction(struct si_sm_data *bt, + unsigned char *data, + unsigned int size) +{ + unsigned int i; + + if (size < 2) + return IPMI_REQ_LEN_INVALID_ERR; + if (size > IPMI_MAX_MSG_LENGTH) + return IPMI_REQ_LEN_EXCEEDED_ERR; + + if (bt->state == BT_STATE_LONG_BUSY) + return IPMI_NODE_BUSY_ERR; + + if (bt->state != BT_STATE_IDLE) + return IPMI_NOT_IN_MY_STATE_ERR; + + if (bt_debug & BT_DEBUG_MSG) { + printk(KERN_WARNING "BT: +++++++++++++++++ New command\n"); + printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2); + for (i = 0; i < size; i ++) + printk(" %02x", data[i]); + printk("\n"); + } + bt->write_data[0] = size + 1; /* all data plus seq byte */ + bt->write_data[1] = *data; /* NetFn/LUN */ + bt->write_data[2] = bt->seq++; + memcpy(bt->write_data + 3, data + 1, size - 1); + bt->write_count = size + 2; + bt->error_retries = 0; + bt->nonzero_status = 0; + bt->truncated = 0; + bt->state = BT_STATE_XACTION_START; + bt->timeout = bt->BT_CAP_req2rsp; + force_result(bt, IPMI_ERR_UNSPECIFIED); + return 0; +} + +/* + * After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE + * it calls this. Strip out the length and seq bytes. + */ + +static int bt_get_result(struct si_sm_data *bt, + unsigned char *data, + unsigned int length) +{ + int i, msg_len; + + msg_len = bt->read_count - 2; /* account for length & seq */ + if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH) { + force_result(bt, IPMI_ERR_UNSPECIFIED); + msg_len = 3; + } + data[0] = bt->read_data[1]; + data[1] = bt->read_data[3]; + if (length < msg_len || bt->truncated) { + data[2] = IPMI_ERR_MSG_TRUNCATED; + msg_len = 3; + } else + memcpy(data + 2, bt->read_data + 4, msg_len - 2); + + if (bt_debug & BT_DEBUG_MSG) { + printk(KERN_WARNING "BT: result %d bytes:", msg_len); + for (i = 0; i < msg_len; i++) + printk(" %02x", data[i]); + printk("\n"); + } + return msg_len; +} + +/* This bit's functionality is optional */ +#define BT_BMC_HWRST 0x80 + +static void reset_flags(struct si_sm_data *bt) +{ + if (bt_debug) + printk(KERN_WARNING "IPMI BT: flag reset %s\n", + status2txt(BT_STATUS)); + if (BT_STATUS & BT_H_BUSY) + BT_CONTROL(BT_H_BUSY); /* force clear */ + BT_CONTROL(BT_CLR_WR_PTR); /* always reset */ + BT_CONTROL(BT_SMS_ATN); /* always clear */ + BT_INTMASK_W(BT_BMC_HWRST); +} + +/* + * Get rid of an unwanted/stale response. This should only be needed for + * BMCs that support multiple outstanding requests. + */ + +static void drain_BMC2HOST(struct si_sm_data *bt) +{ + int i, size; + + if (!(BT_STATUS & BT_B2H_ATN)) /* Not signalling a response */ + return; + + BT_CONTROL(BT_H_BUSY); /* now set */ + BT_CONTROL(BT_B2H_ATN); /* always clear */ + BT_STATUS; /* pause */ + BT_CONTROL(BT_B2H_ATN); /* some BMCs are stubborn */ + BT_CONTROL(BT_CLR_RD_PTR); /* always reset */ + if (bt_debug) + printk(KERN_WARNING "IPMI BT: stale response %s; ", + status2txt(BT_STATUS)); + size = BMC2HOST; + for (i = 0; i < size ; i++) + BMC2HOST; + BT_CONTROL(BT_H_BUSY); /* now clear */ + if (bt_debug) + printk("drained %d bytes\n", size + 1); +} + +static inline void write_all_bytes(struct si_sm_data *bt) +{ + int i; + + if (bt_debug & BT_DEBUG_MSG) { + printk(KERN_WARNING "BT: write %d bytes seq=0x%02X", + bt->write_count, bt->seq); + for (i = 0; i < bt->write_count; i++) + printk(" %02x", bt->write_data[i]); + printk("\n"); + } + for (i = 0; i < bt->write_count; i++) + HOST2BMC(bt->write_data[i]); +} + +static inline int read_all_bytes(struct si_sm_data *bt) +{ + unsigned int i; + + /* + * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode. + * Keep layout of first four bytes aligned with write_data[] + */ + + bt->read_data[0] = BMC2HOST; + bt->read_count = bt->read_data[0]; + + if (bt->read_count < 4 || bt->read_count >= IPMI_MAX_MSG_LENGTH) { + if (bt_debug & BT_DEBUG_MSG) + printk(KERN_WARNING "BT: bad raw rsp len=%d\n", + bt->read_count); + bt->truncated = 1; + return 1; /* let next XACTION START clean it up */ + } + for (i = 1; i <= bt->read_count; i++) + bt->read_data[i] = BMC2HOST; + bt->read_count++; /* Account internally for length byte */ + + if (bt_debug & BT_DEBUG_MSG) { + int max = bt->read_count; + + printk(KERN_WARNING "BT: got %d bytes seq=0x%02X", + max, bt->read_data[2]); + if (max > 16) + max = 16; + for (i = 0; i < max; i++) + printk(KERN_CONT " %02x", bt->read_data[i]); + printk(KERN_CONT "%s\n", bt->read_count == max ? "" : " ..."); + } + + /* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */ + if ((bt->read_data[3] == bt->write_data[3]) && + (bt->read_data[2] == bt->write_data[2]) && + ((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8))) + return 1; + + if (bt_debug & BT_DEBUG_MSG) + printk(KERN_WARNING "IPMI BT: bad packet: " + "want 0x(%02X, %02X, %02X) got (%02X, %02X, %02X)\n", + bt->write_data[1] | 0x04, bt->write_data[2], bt->write_data[3], + bt->read_data[1], bt->read_data[2], bt->read_data[3]); + return 0; +} + +/* Restart if retries are left, or return an error completion code */ + +static enum si_sm_result error_recovery(struct si_sm_data *bt, + unsigned char status, + unsigned char cCode) +{ + char *reason; + + bt->timeout = bt->BT_CAP_req2rsp; + + switch (cCode) { + case IPMI_TIMEOUT_ERR: + reason = "timeout"; + break; + default: + reason = "internal error"; + break; + } + + printk(KERN_WARNING "IPMI BT: %s in %s %s ", /* open-ended line */ + reason, STATE2TXT, STATUS2TXT); + + /* + * Per the IPMI spec, retries are based on the sequence number + * known only to this module, so manage a restart here. + */ + (bt->error_retries)++; + if (bt->error_retries < bt->BT_CAP_retries) { + printk("%d retries left\n", + bt->BT_CAP_retries - bt->error_retries); + bt->state = BT_STATE_RESTART; + return SI_SM_CALL_WITHOUT_DELAY; + } + + printk(KERN_WARNING "failed %d retries, sending error response\n", + bt->BT_CAP_retries); + if (!bt->nonzero_status) + printk(KERN_ERR "IPMI BT: stuck, try power cycle\n"); + + /* this is most likely during insmod */ + else if (bt->seq <= (unsigned char)(bt->BT_CAP_retries & 0xFF)) { + printk(KERN_WARNING "IPMI: BT reset (takes 5 secs)\n"); + bt->state = BT_STATE_RESET1; + return SI_SM_CALL_WITHOUT_DELAY; + } + + /* + * Concoct a useful error message, set up the next state, and + * be done with this sequence. + */ + + bt->state = BT_STATE_IDLE; + switch (cCode) { + case IPMI_TIMEOUT_ERR: + if (status & BT_B_BUSY) { + cCode = IPMI_NODE_BUSY_ERR; + bt->state = BT_STATE_LONG_BUSY; + } + break; + default: + break; + } + force_result(bt, cCode); + return SI_SM_TRANSACTION_COMPLETE; +} + +/* Check status and (usually) take action and change this state machine. */ + +static enum si_sm_result bt_event(struct si_sm_data *bt, long time) +{ + unsigned char status, BT_CAP[8]; + static enum bt_states last_printed = BT_STATE_PRINTME; + int i; + + status = BT_STATUS; + bt->nonzero_status |= status; + if ((bt_debug & BT_DEBUG_STATES) && (bt->state != last_printed)) { + printk(KERN_WARNING "BT: %s %s TO=%ld - %ld \n", + STATE2TXT, + STATUS2TXT, + bt->timeout, + time); + last_printed = bt->state; + } + + /* + * Commands that time out may still (eventually) provide a response. + * This stale response will get in the way of a new response so remove + * it if possible (hopefully during IDLE). Even if it comes up later + * it will be rejected by its (now-forgotten) seq number. + */ + + if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) { + drain_BMC2HOST(bt); + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + } + + if ((bt->state != BT_STATE_IDLE) && + (bt->state < BT_STATE_PRINTME)) { + /* check timeout */ + bt->timeout -= time; + if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) + return error_recovery(bt, + status, + IPMI_TIMEOUT_ERR); + } + + switch (bt->state) { + + /* + * Idle state first checks for asynchronous messages from another + * channel, then does some opportunistic housekeeping. + */ + + case BT_STATE_IDLE: + if (status & BT_SMS_ATN) { + BT_CONTROL(BT_SMS_ATN); /* clear it */ + return SI_SM_ATTN; + } + + if (status & BT_H_BUSY) /* clear a leftover H_BUSY */ + BT_CONTROL(BT_H_BUSY); + + /* Read BT capabilities if it hasn't been done yet */ + if (!bt->BT_CAP_outreqs) + BT_STATE_CHANGE(BT_STATE_CAPABILITIES_BEGIN, + SI_SM_CALL_WITHOUT_DELAY); + bt->timeout = bt->BT_CAP_req2rsp; + BT_SI_SM_RETURN(SI_SM_IDLE); + + case BT_STATE_XACTION_START: + if (status & (BT_B_BUSY | BT_H2B_ATN)) + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + if (BT_STATUS & BT_H_BUSY) + BT_CONTROL(BT_H_BUSY); /* force clear */ + BT_STATE_CHANGE(BT_STATE_WRITE_BYTES, + SI_SM_CALL_WITHOUT_DELAY); + + case BT_STATE_WRITE_BYTES: + if (status & BT_H_BUSY) + BT_CONTROL(BT_H_BUSY); /* clear */ + BT_CONTROL(BT_CLR_WR_PTR); + write_all_bytes(bt); + BT_CONTROL(BT_H2B_ATN); /* can clear too fast to catch */ + BT_STATE_CHANGE(BT_STATE_WRITE_CONSUME, + SI_SM_CALL_WITHOUT_DELAY); + + case BT_STATE_WRITE_CONSUME: + if (status & (BT_B_BUSY | BT_H2B_ATN)) + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + BT_STATE_CHANGE(BT_STATE_READ_WAIT, + SI_SM_CALL_WITHOUT_DELAY); + + /* Spinning hard can suppress B2H_ATN and force a timeout */ + + case BT_STATE_READ_WAIT: + if (!(status & BT_B2H_ATN)) + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + BT_CONTROL(BT_H_BUSY); /* set */ + + /* + * Uncached, ordered writes should just proceed serially but + * some BMCs don't clear B2H_ATN with one hit. Fast-path a + * workaround without too much penalty to the general case. + */ + + BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */ + BT_STATE_CHANGE(BT_STATE_CLEAR_B2H, + SI_SM_CALL_WITHOUT_DELAY); + + case BT_STATE_CLEAR_B2H: + if (status & BT_B2H_ATN) { + /* keep hitting it */ + BT_CONTROL(BT_B2H_ATN); + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + } + BT_STATE_CHANGE(BT_STATE_READ_BYTES, + SI_SM_CALL_WITHOUT_DELAY); + + case BT_STATE_READ_BYTES: + if (!(status & BT_H_BUSY)) + /* check in case of retry */ + BT_CONTROL(BT_H_BUSY); + BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */ + i = read_all_bytes(bt); /* true == packet seq match */ + BT_CONTROL(BT_H_BUSY); /* NOW clear */ + if (!i) /* Not my message */ + BT_STATE_CHANGE(BT_STATE_READ_WAIT, + SI_SM_CALL_WITHOUT_DELAY); + bt->state = bt->complete; + return bt->state == BT_STATE_IDLE ? /* where to next? */ + SI_SM_TRANSACTION_COMPLETE : /* normal */ + SI_SM_CALL_WITHOUT_DELAY; /* Startup magic */ + + case BT_STATE_LONG_BUSY: /* For example: after FW update */ + if (!(status & BT_B_BUSY)) { + reset_flags(bt); /* next state is now IDLE */ + bt_init_data(bt, bt->io); + } + return SI_SM_CALL_WITH_DELAY; /* No repeat printing */ + + case BT_STATE_RESET1: + reset_flags(bt); + drain_BMC2HOST(bt); + BT_STATE_CHANGE(BT_STATE_RESET2, + SI_SM_CALL_WITH_DELAY); + + case BT_STATE_RESET2: /* Send a soft reset */ + BT_CONTROL(BT_CLR_WR_PTR); + HOST2BMC(3); /* number of bytes following */ + HOST2BMC(0x18); /* NetFn/LUN == Application, LUN 0 */ + HOST2BMC(42); /* Sequence number */ + HOST2BMC(3); /* Cmd == Soft reset */ + BT_CONTROL(BT_H2B_ATN); + bt->timeout = BT_RESET_DELAY * USEC_PER_SEC; + BT_STATE_CHANGE(BT_STATE_RESET3, + SI_SM_CALL_WITH_DELAY); + + case BT_STATE_RESET3: /* Hold off everything for a bit */ + if (bt->timeout > 0) + return SI_SM_CALL_WITH_DELAY; + drain_BMC2HOST(bt); + BT_STATE_CHANGE(BT_STATE_RESTART, + SI_SM_CALL_WITH_DELAY); + + case BT_STATE_RESTART: /* don't reset retries or seq! */ + bt->read_count = 0; + bt->nonzero_status = 0; + bt->timeout = bt->BT_CAP_req2rsp; + BT_STATE_CHANGE(BT_STATE_XACTION_START, + SI_SM_CALL_WITH_DELAY); + + /* + * Get BT Capabilities, using timing of upper level state machine. + * Set outreqs to prevent infinite loop on timeout. + */ + case BT_STATE_CAPABILITIES_BEGIN: + bt->BT_CAP_outreqs = 1; + { + unsigned char GetBT_CAP[] = { 0x18, 0x36 }; + bt->state = BT_STATE_IDLE; + bt_start_transaction(bt, GetBT_CAP, sizeof(GetBT_CAP)); + } + bt->complete = BT_STATE_CAPABILITIES_END; + BT_STATE_CHANGE(BT_STATE_XACTION_START, + SI_SM_CALL_WITH_DELAY); + + case BT_STATE_CAPABILITIES_END: + i = bt_get_result(bt, BT_CAP, sizeof(BT_CAP)); + bt_init_data(bt, bt->io); + if ((i == 8) && !BT_CAP[2]) { + bt->BT_CAP_outreqs = BT_CAP[3]; + bt->BT_CAP_req2rsp = BT_CAP[6] * USEC_PER_SEC; + bt->BT_CAP_retries = BT_CAP[7]; + } else + printk(KERN_WARNING "IPMI BT: using default values\n"); + if (!bt->BT_CAP_outreqs) + bt->BT_CAP_outreqs = 1; + printk(KERN_WARNING "IPMI BT: req2rsp=%ld secs retries=%d\n", + bt->BT_CAP_req2rsp / USEC_PER_SEC, bt->BT_CAP_retries); + bt->timeout = bt->BT_CAP_req2rsp; + return SI_SM_CALL_WITHOUT_DELAY; + + default: /* should never occur */ + return error_recovery(bt, + status, + IPMI_ERR_UNSPECIFIED); + } + return SI_SM_CALL_WITH_DELAY; +} + +static int bt_detect(struct si_sm_data *bt) +{ + /* + * It's impossible for the BT status and interrupt registers to be + * all 1's, (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. The calling routine uses negative logic. + */ + + if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF)) + return 1; + reset_flags(bt); + return 0; +} + +static void bt_cleanup(struct si_sm_data *bt) +{ +} + +static int bt_size(void) +{ + return sizeof(struct si_sm_data); +} + +struct si_sm_handlers bt_smi_handlers = { + .init_data = bt_init_data, + .start_transaction = bt_start_transaction, + .get_result = bt_get_result, + .event = bt_event, + .detect = bt_detect, + .cleanup = bt_cleanup, + .size = bt_size, +}; diff --git a/kernel/drivers/char/ipmi/ipmi_devintf.c b/kernel/drivers/char/ipmi/ipmi_devintf.c new file mode 100644 index 000000000..178657453 --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_devintf.c @@ -0,0 +1,992 @@ +/* + * ipmi_devintf.c + * + * Linux device interface for the IPMI message handler. + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/poll.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/ipmi.h> +#include <linux/mutex.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/compat.h> + +struct ipmi_file_private +{ + ipmi_user_t user; + spinlock_t recv_msg_lock; + struct list_head recv_msgs; + struct file *file; + struct fasync_struct *fasync_queue; + wait_queue_head_t wait; + struct mutex recv_mutex; + int default_retries; + unsigned int default_retry_time_ms; +}; + +static DEFINE_MUTEX(ipmi_mutex); +static void file_receive_handler(struct ipmi_recv_msg *msg, + void *handler_data) +{ + struct ipmi_file_private *priv = handler_data; + int was_empty; + unsigned long flags; + + spin_lock_irqsave(&(priv->recv_msg_lock), flags); + + was_empty = list_empty(&(priv->recv_msgs)); + list_add_tail(&(msg->link), &(priv->recv_msgs)); + + if (was_empty) { + wake_up_interruptible(&priv->wait); + kill_fasync(&priv->fasync_queue, SIGIO, POLL_IN); + } + + spin_unlock_irqrestore(&(priv->recv_msg_lock), flags); +} + +static unsigned int ipmi_poll(struct file *file, poll_table *wait) +{ + struct ipmi_file_private *priv = file->private_data; + unsigned int mask = 0; + unsigned long flags; + + poll_wait(file, &priv->wait, wait); + + spin_lock_irqsave(&priv->recv_msg_lock, flags); + + if (!list_empty(&(priv->recv_msgs))) + mask |= (POLLIN | POLLRDNORM); + + spin_unlock_irqrestore(&priv->recv_msg_lock, flags); + + return mask; +} + +static int ipmi_fasync(int fd, struct file *file, int on) +{ + struct ipmi_file_private *priv = file->private_data; + int result; + + mutex_lock(&ipmi_mutex); /* could race against open() otherwise */ + result = fasync_helper(fd, file, on, &priv->fasync_queue); + mutex_unlock(&ipmi_mutex); + + return (result); +} + +static struct ipmi_user_hndl ipmi_hndlrs = +{ + .ipmi_recv_hndl = file_receive_handler, +}; + +static int ipmi_open(struct inode *inode, struct file *file) +{ + int if_num = iminor(inode); + int rv; + struct ipmi_file_private *priv; + + + priv = kmalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_lock(&ipmi_mutex); + priv->file = file; + + rv = ipmi_create_user(if_num, + &ipmi_hndlrs, + priv, + &(priv->user)); + if (rv) { + kfree(priv); + goto out; + } + + file->private_data = priv; + + spin_lock_init(&(priv->recv_msg_lock)); + INIT_LIST_HEAD(&(priv->recv_msgs)); + init_waitqueue_head(&priv->wait); + priv->fasync_queue = NULL; + mutex_init(&priv->recv_mutex); + + /* Use the low-level defaults. */ + priv->default_retries = -1; + priv->default_retry_time_ms = 0; + +out: + mutex_unlock(&ipmi_mutex); + return rv; +} + +static int ipmi_release(struct inode *inode, struct file *file) +{ + struct ipmi_file_private *priv = file->private_data; + int rv; + struct ipmi_recv_msg *msg, *next; + + rv = ipmi_destroy_user(priv->user); + if (rv) + return rv; + + list_for_each_entry_safe(msg, next, &priv->recv_msgs, link) + ipmi_free_recv_msg(msg); + + + kfree(priv); + + return 0; +} + +static int handle_send_req(ipmi_user_t user, + struct ipmi_req *req, + int retries, + unsigned int retry_time_ms) +{ + int rv; + struct ipmi_addr addr; + struct kernel_ipmi_msg msg; + + if (req->addr_len > sizeof(struct ipmi_addr)) + return -EINVAL; + + if (copy_from_user(&addr, req->addr, req->addr_len)) + return -EFAULT; + + msg.netfn = req->msg.netfn; + msg.cmd = req->msg.cmd; + msg.data_len = req->msg.data_len; + msg.data = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!msg.data) + return -ENOMEM; + + /* From here out we cannot return, we must jump to "out" for + error exits to free msgdata. */ + + rv = ipmi_validate_addr(&addr, req->addr_len); + if (rv) + goto out; + + if (req->msg.data != NULL) { + if (req->msg.data_len > IPMI_MAX_MSG_LENGTH) { + rv = -EMSGSIZE; + goto out; + } + + if (copy_from_user(msg.data, + req->msg.data, + req->msg.data_len)) + { + rv = -EFAULT; + goto out; + } + } else { + msg.data_len = 0; + } + + rv = ipmi_request_settime(user, + &addr, + req->msgid, + &msg, + NULL, + 0, + retries, + retry_time_ms); + out: + kfree(msg.data); + return rv; +} + +static int ipmi_ioctl(struct file *file, + unsigned int cmd, + unsigned long data) +{ + int rv = -EINVAL; + struct ipmi_file_private *priv = file->private_data; + void __user *arg = (void __user *)data; + + switch (cmd) + { + case IPMICTL_SEND_COMMAND: + { + struct ipmi_req req; + + if (copy_from_user(&req, arg, sizeof(req))) { + rv = -EFAULT; + break; + } + + rv = handle_send_req(priv->user, + &req, + priv->default_retries, + priv->default_retry_time_ms); + break; + } + + case IPMICTL_SEND_COMMAND_SETTIME: + { + struct ipmi_req_settime req; + + if (copy_from_user(&req, arg, sizeof(req))) { + rv = -EFAULT; + break; + } + + rv = handle_send_req(priv->user, + &req.req, + req.retries, + req.retry_time_ms); + break; + } + + case IPMICTL_RECEIVE_MSG: + case IPMICTL_RECEIVE_MSG_TRUNC: + { + struct ipmi_recv rsp; + int addr_len; + struct list_head *entry; + struct ipmi_recv_msg *msg; + unsigned long flags; + + + rv = 0; + if (copy_from_user(&rsp, arg, sizeof(rsp))) { + rv = -EFAULT; + break; + } + + /* We claim a mutex because we don't want two + users getting something from the queue at a time. + Since we have to release the spinlock before we can + copy the data to the user, it's possible another + user will grab something from the queue, too. Then + the messages might get out of order if something + fails and the message gets put back onto the + queue. This mutex prevents that problem. */ + mutex_lock(&priv->recv_mutex); + + /* Grab the message off the list. */ + spin_lock_irqsave(&(priv->recv_msg_lock), flags); + if (list_empty(&(priv->recv_msgs))) { + spin_unlock_irqrestore(&(priv->recv_msg_lock), flags); + rv = -EAGAIN; + goto recv_err; + } + entry = priv->recv_msgs.next; + msg = list_entry(entry, struct ipmi_recv_msg, link); + list_del(entry); + spin_unlock_irqrestore(&(priv->recv_msg_lock), flags); + + addr_len = ipmi_addr_length(msg->addr.addr_type); + if (rsp.addr_len < addr_len) + { + rv = -EINVAL; + goto recv_putback_on_err; + } + + if (copy_to_user(rsp.addr, &(msg->addr), addr_len)) { + rv = -EFAULT; + goto recv_putback_on_err; + } + rsp.addr_len = addr_len; + + rsp.recv_type = msg->recv_type; + rsp.msgid = msg->msgid; + rsp.msg.netfn = msg->msg.netfn; + rsp.msg.cmd = msg->msg.cmd; + + if (msg->msg.data_len > 0) { + if (rsp.msg.data_len < msg->msg.data_len) { + rv = -EMSGSIZE; + if (cmd == IPMICTL_RECEIVE_MSG_TRUNC) { + msg->msg.data_len = rsp.msg.data_len; + } else { + goto recv_putback_on_err; + } + } + + if (copy_to_user(rsp.msg.data, + msg->msg.data, + msg->msg.data_len)) + { + rv = -EFAULT; + goto recv_putback_on_err; + } + rsp.msg.data_len = msg->msg.data_len; + } else { + rsp.msg.data_len = 0; + } + + if (copy_to_user(arg, &rsp, sizeof(rsp))) { + rv = -EFAULT; + goto recv_putback_on_err; + } + + mutex_unlock(&priv->recv_mutex); + ipmi_free_recv_msg(msg); + break; + + recv_putback_on_err: + /* If we got an error, put the message back onto + the head of the queue. */ + spin_lock_irqsave(&(priv->recv_msg_lock), flags); + list_add(entry, &(priv->recv_msgs)); + spin_unlock_irqrestore(&(priv->recv_msg_lock), flags); + mutex_unlock(&priv->recv_mutex); + break; + + recv_err: + mutex_unlock(&priv->recv_mutex); + break; + } + + case IPMICTL_REGISTER_FOR_CMD: + { + struct ipmi_cmdspec val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_register_for_cmd(priv->user, val.netfn, val.cmd, + IPMI_CHAN_ALL); + break; + } + + case IPMICTL_UNREGISTER_FOR_CMD: + { + struct ipmi_cmdspec val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_unregister_for_cmd(priv->user, val.netfn, val.cmd, + IPMI_CHAN_ALL); + break; + } + + case IPMICTL_REGISTER_FOR_CMD_CHANS: + { + struct ipmi_cmdspec_chans val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_register_for_cmd(priv->user, val.netfn, val.cmd, + val.chans); + break; + } + + case IPMICTL_UNREGISTER_FOR_CMD_CHANS: + { + struct ipmi_cmdspec_chans val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_unregister_for_cmd(priv->user, val.netfn, val.cmd, + val.chans); + break; + } + + case IPMICTL_SET_GETS_EVENTS_CMD: + { + int val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_set_gets_events(priv->user, val); + break; + } + + /* The next four are legacy, not per-channel. */ + case IPMICTL_SET_MY_ADDRESS_CMD: + { + unsigned int val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_set_my_address(priv->user, 0, val); + break; + } + + case IPMICTL_GET_MY_ADDRESS_CMD: + { + unsigned int val; + unsigned char rval; + + rv = ipmi_get_my_address(priv->user, 0, &rval); + if (rv) + break; + + val = rval; + + if (copy_to_user(arg, &val, sizeof(val))) { + rv = -EFAULT; + break; + } + break; + } + + case IPMICTL_SET_MY_LUN_CMD: + { + unsigned int val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_set_my_LUN(priv->user, 0, val); + break; + } + + case IPMICTL_GET_MY_LUN_CMD: + { + unsigned int val; + unsigned char rval; + + rv = ipmi_get_my_LUN(priv->user, 0, &rval); + if (rv) + break; + + val = rval; + + if (copy_to_user(arg, &val, sizeof(val))) { + rv = -EFAULT; + break; + } + break; + } + + case IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD: + { + struct ipmi_channel_lun_address_set val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + return ipmi_set_my_address(priv->user, val.channel, val.value); + break; + } + + case IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD: + { + struct ipmi_channel_lun_address_set val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_get_my_address(priv->user, val.channel, &val.value); + if (rv) + break; + + if (copy_to_user(arg, &val, sizeof(val))) { + rv = -EFAULT; + break; + } + break; + } + + case IPMICTL_SET_MY_CHANNEL_LUN_CMD: + { + struct ipmi_channel_lun_address_set val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_set_my_LUN(priv->user, val.channel, val.value); + break; + } + + case IPMICTL_GET_MY_CHANNEL_LUN_CMD: + { + struct ipmi_channel_lun_address_set val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_get_my_LUN(priv->user, val.channel, &val.value); + if (rv) + break; + + if (copy_to_user(arg, &val, sizeof(val))) { + rv = -EFAULT; + break; + } + break; + } + + case IPMICTL_SET_TIMING_PARMS_CMD: + { + struct ipmi_timing_parms parms; + + if (copy_from_user(&parms, arg, sizeof(parms))) { + rv = -EFAULT; + break; + } + + priv->default_retries = parms.retries; + priv->default_retry_time_ms = parms.retry_time_ms; + rv = 0; + break; + } + + case IPMICTL_GET_TIMING_PARMS_CMD: + { + struct ipmi_timing_parms parms; + + parms.retries = priv->default_retries; + parms.retry_time_ms = priv->default_retry_time_ms; + + if (copy_to_user(arg, &parms, sizeof(parms))) { + rv = -EFAULT; + break; + } + + rv = 0; + break; + } + + case IPMICTL_GET_MAINTENANCE_MODE_CMD: + { + int mode; + + mode = ipmi_get_maintenance_mode(priv->user); + if (copy_to_user(arg, &mode, sizeof(mode))) { + rv = -EFAULT; + break; + } + rv = 0; + break; + } + + case IPMICTL_SET_MAINTENANCE_MODE_CMD: + { + int mode; + + if (copy_from_user(&mode, arg, sizeof(mode))) { + rv = -EFAULT; + break; + } + rv = ipmi_set_maintenance_mode(priv->user, mode); + break; + } + } + + return rv; +} + +/* + * Note: it doesn't make sense to take the BKL here but + * not in compat_ipmi_ioctl. -arnd + */ +static long ipmi_unlocked_ioctl(struct file *file, + unsigned int cmd, + unsigned long data) +{ + int ret; + + mutex_lock(&ipmi_mutex); + ret = ipmi_ioctl(file, cmd, data); + mutex_unlock(&ipmi_mutex); + + return ret; +} + +#ifdef CONFIG_COMPAT + +/* + * The following code contains code for supporting 32-bit compatible + * ioctls on 64-bit kernels. This allows running 32-bit apps on the + * 64-bit kernel + */ +#define COMPAT_IPMICTL_SEND_COMMAND \ + _IOR(IPMI_IOC_MAGIC, 13, struct compat_ipmi_req) +#define COMPAT_IPMICTL_SEND_COMMAND_SETTIME \ + _IOR(IPMI_IOC_MAGIC, 21, struct compat_ipmi_req_settime) +#define COMPAT_IPMICTL_RECEIVE_MSG \ + _IOWR(IPMI_IOC_MAGIC, 12, struct compat_ipmi_recv) +#define COMPAT_IPMICTL_RECEIVE_MSG_TRUNC \ + _IOWR(IPMI_IOC_MAGIC, 11, struct compat_ipmi_recv) + +struct compat_ipmi_msg { + u8 netfn; + u8 cmd; + u16 data_len; + compat_uptr_t data; +}; + +struct compat_ipmi_req { + compat_uptr_t addr; + compat_uint_t addr_len; + compat_long_t msgid; + struct compat_ipmi_msg msg; +}; + +struct compat_ipmi_recv { + compat_int_t recv_type; + compat_uptr_t addr; + compat_uint_t addr_len; + compat_long_t msgid; + struct compat_ipmi_msg msg; +}; + +struct compat_ipmi_req_settime { + struct compat_ipmi_req req; + compat_int_t retries; + compat_uint_t retry_time_ms; +}; + +/* + * Define some helper functions for copying IPMI data + */ +static long get_compat_ipmi_msg(struct ipmi_msg *p64, + struct compat_ipmi_msg __user *p32) +{ + compat_uptr_t tmp; + + if (!access_ok(VERIFY_READ, p32, sizeof(*p32)) || + __get_user(p64->netfn, &p32->netfn) || + __get_user(p64->cmd, &p32->cmd) || + __get_user(p64->data_len, &p32->data_len) || + __get_user(tmp, &p32->data)) + return -EFAULT; + p64->data = compat_ptr(tmp); + return 0; +} + +static long put_compat_ipmi_msg(struct ipmi_msg *p64, + struct compat_ipmi_msg __user *p32) +{ + if (!access_ok(VERIFY_WRITE, p32, sizeof(*p32)) || + __put_user(p64->netfn, &p32->netfn) || + __put_user(p64->cmd, &p32->cmd) || + __put_user(p64->data_len, &p32->data_len)) + return -EFAULT; + return 0; +} + +static long get_compat_ipmi_req(struct ipmi_req *p64, + struct compat_ipmi_req __user *p32) +{ + + compat_uptr_t tmp; + + if (!access_ok(VERIFY_READ, p32, sizeof(*p32)) || + __get_user(tmp, &p32->addr) || + __get_user(p64->addr_len, &p32->addr_len) || + __get_user(p64->msgid, &p32->msgid) || + get_compat_ipmi_msg(&p64->msg, &p32->msg)) + return -EFAULT; + p64->addr = compat_ptr(tmp); + return 0; +} + +static long get_compat_ipmi_req_settime(struct ipmi_req_settime *p64, + struct compat_ipmi_req_settime __user *p32) +{ + if (!access_ok(VERIFY_READ, p32, sizeof(*p32)) || + get_compat_ipmi_req(&p64->req, &p32->req) || + __get_user(p64->retries, &p32->retries) || + __get_user(p64->retry_time_ms, &p32->retry_time_ms)) + return -EFAULT; + return 0; +} + +static long get_compat_ipmi_recv(struct ipmi_recv *p64, + struct compat_ipmi_recv __user *p32) +{ + compat_uptr_t tmp; + + if (!access_ok(VERIFY_READ, p32, sizeof(*p32)) || + __get_user(p64->recv_type, &p32->recv_type) || + __get_user(tmp, &p32->addr) || + __get_user(p64->addr_len, &p32->addr_len) || + __get_user(p64->msgid, &p32->msgid) || + get_compat_ipmi_msg(&p64->msg, &p32->msg)) + return -EFAULT; + p64->addr = compat_ptr(tmp); + return 0; +} + +static long put_compat_ipmi_recv(struct ipmi_recv *p64, + struct compat_ipmi_recv __user *p32) +{ + if (!access_ok(VERIFY_WRITE, p32, sizeof(*p32)) || + __put_user(p64->recv_type, &p32->recv_type) || + __put_user(p64->addr_len, &p32->addr_len) || + __put_user(p64->msgid, &p32->msgid) || + put_compat_ipmi_msg(&p64->msg, &p32->msg)) + return -EFAULT; + return 0; +} + +/* + * Handle compatibility ioctls + */ +static long compat_ipmi_ioctl(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + int rc; + struct ipmi_file_private *priv = filep->private_data; + + switch(cmd) { + case COMPAT_IPMICTL_SEND_COMMAND: + { + struct ipmi_req rp; + + if (get_compat_ipmi_req(&rp, compat_ptr(arg))) + return -EFAULT; + + return handle_send_req(priv->user, &rp, + priv->default_retries, + priv->default_retry_time_ms); + } + case COMPAT_IPMICTL_SEND_COMMAND_SETTIME: + { + struct ipmi_req_settime sp; + + if (get_compat_ipmi_req_settime(&sp, compat_ptr(arg))) + return -EFAULT; + + return handle_send_req(priv->user, &sp.req, + sp.retries, sp.retry_time_ms); + } + case COMPAT_IPMICTL_RECEIVE_MSG: + case COMPAT_IPMICTL_RECEIVE_MSG_TRUNC: + { + struct ipmi_recv __user *precv64; + struct ipmi_recv recv64; + + memset(&recv64, 0, sizeof(recv64)); + if (get_compat_ipmi_recv(&recv64, compat_ptr(arg))) + return -EFAULT; + + precv64 = compat_alloc_user_space(sizeof(recv64)); + if (copy_to_user(precv64, &recv64, sizeof(recv64))) + return -EFAULT; + + rc = ipmi_ioctl(filep, + ((cmd == COMPAT_IPMICTL_RECEIVE_MSG) + ? IPMICTL_RECEIVE_MSG + : IPMICTL_RECEIVE_MSG_TRUNC), + (unsigned long) precv64); + if (rc != 0) + return rc; + + if (copy_from_user(&recv64, precv64, sizeof(recv64))) + return -EFAULT; + + if (put_compat_ipmi_recv(&recv64, compat_ptr(arg))) + return -EFAULT; + + return rc; + } + default: + return ipmi_ioctl(filep, cmd, arg); + } +} + +static long unlocked_compat_ipmi_ioctl(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + int ret; + + mutex_lock(&ipmi_mutex); + ret = compat_ipmi_ioctl(filep, cmd, arg); + mutex_unlock(&ipmi_mutex); + + return ret; +} +#endif + +static const struct file_operations ipmi_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = ipmi_unlocked_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = unlocked_compat_ipmi_ioctl, +#endif + .open = ipmi_open, + .release = ipmi_release, + .fasync = ipmi_fasync, + .poll = ipmi_poll, + .llseek = noop_llseek, +}; + +#define DEVICE_NAME "ipmidev" + +static int ipmi_major; +module_param(ipmi_major, int, 0); +MODULE_PARM_DESC(ipmi_major, "Sets the major number of the IPMI device. By" + " default, or if you set it to zero, it will choose the next" + " available device. Setting it to -1 will disable the" + " interface. Other values will set the major device number" + " to that value."); + +/* Keep track of the devices that are registered. */ +struct ipmi_reg_list { + dev_t dev; + struct list_head link; +}; +static LIST_HEAD(reg_list); +static DEFINE_MUTEX(reg_list_mutex); + +static struct class *ipmi_class; + +static void ipmi_new_smi(int if_num, struct device *device) +{ + dev_t dev = MKDEV(ipmi_major, if_num); + struct ipmi_reg_list *entry; + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) { + printk(KERN_ERR "ipmi_devintf: Unable to create the" + " ipmi class device link\n"); + return; + } + entry->dev = dev; + + mutex_lock(®_list_mutex); + device_create(ipmi_class, device, dev, NULL, "ipmi%d", if_num); + list_add(&entry->link, ®_list); + mutex_unlock(®_list_mutex); +} + +static void ipmi_smi_gone(int if_num) +{ + dev_t dev = MKDEV(ipmi_major, if_num); + struct ipmi_reg_list *entry; + + mutex_lock(®_list_mutex); + list_for_each_entry(entry, ®_list, link) { + if (entry->dev == dev) { + list_del(&entry->link); + kfree(entry); + break; + } + } + device_destroy(ipmi_class, dev); + mutex_unlock(®_list_mutex); +} + +static struct ipmi_smi_watcher smi_watcher = +{ + .owner = THIS_MODULE, + .new_smi = ipmi_new_smi, + .smi_gone = ipmi_smi_gone, +}; + +static int __init init_ipmi_devintf(void) +{ + int rv; + + if (ipmi_major < 0) + return -EINVAL; + + printk(KERN_INFO "ipmi device interface\n"); + + ipmi_class = class_create(THIS_MODULE, "ipmi"); + if (IS_ERR(ipmi_class)) { + printk(KERN_ERR "ipmi: can't register device class\n"); + return PTR_ERR(ipmi_class); + } + + rv = register_chrdev(ipmi_major, DEVICE_NAME, &ipmi_fops); + if (rv < 0) { + class_destroy(ipmi_class); + printk(KERN_ERR "ipmi: can't get major %d\n", ipmi_major); + return rv; + } + + if (ipmi_major == 0) { + ipmi_major = rv; + } + + rv = ipmi_smi_watcher_register(&smi_watcher); + if (rv) { + unregister_chrdev(ipmi_major, DEVICE_NAME); + class_destroy(ipmi_class); + printk(KERN_WARNING "ipmi: can't register smi watcher\n"); + return rv; + } + + return 0; +} +module_init(init_ipmi_devintf); + +static void __exit cleanup_ipmi(void) +{ + struct ipmi_reg_list *entry, *entry2; + mutex_lock(®_list_mutex); + list_for_each_entry_safe(entry, entry2, ®_list, link) { + list_del(&entry->link); + device_destroy(ipmi_class, entry->dev); + kfree(entry); + } + mutex_unlock(®_list_mutex); + class_destroy(ipmi_class); + ipmi_smi_watcher_unregister(&smi_watcher); + unregister_chrdev(ipmi_major, DEVICE_NAME); +} +module_exit(cleanup_ipmi); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); +MODULE_DESCRIPTION("Linux device interface for the IPMI message handler."); +MODULE_ALIAS("platform:ipmi_si"); diff --git a/kernel/drivers/char/ipmi/ipmi_kcs_sm.c b/kernel/drivers/char/ipmi/ipmi_kcs_sm.c new file mode 100644 index 000000000..8c25f5968 --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_kcs_sm.c @@ -0,0 +1,551 @@ +/* + * ipmi_kcs_sm.c + * + * State machine for handling IPMI KCS interfaces. + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This state machine is taken from the state machine in the IPMI spec, + * pretty much verbatim. If you have questions about the states, see + * that document. + */ + +#include <linux/kernel.h> /* For printk. */ +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/string.h> +#include <linux/jiffies.h> +#include <linux/ipmi_msgdefs.h> /* for completion codes */ +#include "ipmi_si_sm.h" + +/* kcs_debug is a bit-field + * KCS_DEBUG_ENABLE - turned on for now + * KCS_DEBUG_MSG - commands and their responses + * KCS_DEBUG_STATES - state machine + */ +#define KCS_DEBUG_STATES 4 +#define KCS_DEBUG_MSG 2 +#define KCS_DEBUG_ENABLE 1 + +static int kcs_debug; +module_param(kcs_debug, int, 0644); +MODULE_PARM_DESC(kcs_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); + +/* The states the KCS driver may be in. */ +enum kcs_states { + /* The KCS interface is currently doing nothing. */ + KCS_IDLE, + + /* + * We are starting an operation. The data is in the output + * buffer, but nothing has been done to the interface yet. This + * was added to the state machine in the spec to wait for the + * initial IBF. + */ + KCS_START_OP, + + /* We have written a write cmd to the interface. */ + KCS_WAIT_WRITE_START, + + /* We are writing bytes to the interface. */ + KCS_WAIT_WRITE, + + /* + * We have written the write end cmd to the interface, and + * still need to write the last byte. + */ + KCS_WAIT_WRITE_END, + + /* We are waiting to read data from the interface. */ + KCS_WAIT_READ, + + /* + * State to transition to the error handler, this was added to + * the state machine in the spec to be sure IBF was there. + */ + KCS_ERROR0, + + /* + * First stage error handler, wait for the interface to + * respond. + */ + KCS_ERROR1, + + /* + * The abort cmd has been written, wait for the interface to + * respond. + */ + KCS_ERROR2, + + /* + * We wrote some data to the interface, wait for it to switch + * to read mode. + */ + KCS_ERROR3, + + /* The hardware failed to follow the state machine. */ + KCS_HOSED +}; + +#define MAX_KCS_READ_SIZE IPMI_MAX_MSG_LENGTH +#define MAX_KCS_WRITE_SIZE IPMI_MAX_MSG_LENGTH + +/* Timeouts in microseconds. */ +#define IBF_RETRY_TIMEOUT (5*USEC_PER_SEC) +#define OBF_RETRY_TIMEOUT (5*USEC_PER_SEC) +#define MAX_ERROR_RETRIES 10 +#define ERROR0_OBF_WAIT_JIFFIES (2*HZ) + +struct si_sm_data { + enum kcs_states state; + struct si_sm_io *io; + unsigned char write_data[MAX_KCS_WRITE_SIZE]; + int write_pos; + int write_count; + int orig_write_count; + unsigned char read_data[MAX_KCS_READ_SIZE]; + int read_pos; + int truncated; + + unsigned int error_retries; + long ibf_timeout; + long obf_timeout; + unsigned long error0_timeout; +}; + +static unsigned int init_kcs_data(struct si_sm_data *kcs, + struct si_sm_io *io) +{ + kcs->state = KCS_IDLE; + kcs->io = io; + kcs->write_pos = 0; + kcs->write_count = 0; + kcs->orig_write_count = 0; + kcs->read_pos = 0; + kcs->error_retries = 0; + kcs->truncated = 0; + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + + /* Reserve 2 I/O bytes. */ + return 2; +} + +static inline unsigned char read_status(struct si_sm_data *kcs) +{ + return kcs->io->inputb(kcs->io, 1); +} + +static inline unsigned char read_data(struct si_sm_data *kcs) +{ + return kcs->io->inputb(kcs->io, 0); +} + +static inline void write_cmd(struct si_sm_data *kcs, unsigned char data) +{ + kcs->io->outputb(kcs->io, 1, data); +} + +static inline void write_data(struct si_sm_data *kcs, unsigned char data) +{ + kcs->io->outputb(kcs->io, 0, data); +} + +/* Control codes. */ +#define KCS_GET_STATUS_ABORT 0x60 +#define KCS_WRITE_START 0x61 +#define KCS_WRITE_END 0x62 +#define KCS_READ_BYTE 0x68 + +/* Status bits. */ +#define GET_STATUS_STATE(status) (((status) >> 6) & 0x03) +#define KCS_IDLE_STATE 0 +#define KCS_READ_STATE 1 +#define KCS_WRITE_STATE 2 +#define KCS_ERROR_STATE 3 +#define GET_STATUS_ATN(status) ((status) & 0x04) +#define GET_STATUS_IBF(status) ((status) & 0x02) +#define GET_STATUS_OBF(status) ((status) & 0x01) + + +static inline void write_next_byte(struct si_sm_data *kcs) +{ + write_data(kcs, kcs->write_data[kcs->write_pos]); + (kcs->write_pos)++; + (kcs->write_count)--; +} + +static inline void start_error_recovery(struct si_sm_data *kcs, char *reason) +{ + (kcs->error_retries)++; + if (kcs->error_retries > MAX_ERROR_RETRIES) { + if (kcs_debug & KCS_DEBUG_ENABLE) + printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", + reason); + kcs->state = KCS_HOSED; + } else { + kcs->error0_timeout = jiffies + ERROR0_OBF_WAIT_JIFFIES; + kcs->state = KCS_ERROR0; + } +} + +static inline void read_next_byte(struct si_sm_data *kcs) +{ + if (kcs->read_pos >= MAX_KCS_READ_SIZE) { + /* Throw the data away and mark it truncated. */ + read_data(kcs); + kcs->truncated = 1; + } else { + kcs->read_data[kcs->read_pos] = read_data(kcs); + (kcs->read_pos)++; + } + write_data(kcs, KCS_READ_BYTE); +} + +static inline int check_ibf(struct si_sm_data *kcs, unsigned char status, + long time) +{ + if (GET_STATUS_IBF(status)) { + kcs->ibf_timeout -= time; + if (kcs->ibf_timeout < 0) { + start_error_recovery(kcs, "IBF not ready in time"); + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + return 1; + } + return 0; + } + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + return 1; +} + +static inline int check_obf(struct si_sm_data *kcs, unsigned char status, + long time) +{ + if (!GET_STATUS_OBF(status)) { + kcs->obf_timeout -= time; + if (kcs->obf_timeout < 0) { + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + start_error_recovery(kcs, "OBF not ready in time"); + return 1; + } + return 0; + } + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + return 1; +} + +static void clear_obf(struct si_sm_data *kcs, unsigned char status) +{ + if (GET_STATUS_OBF(status)) + read_data(kcs); +} + +static void restart_kcs_transaction(struct si_sm_data *kcs) +{ + kcs->write_count = kcs->orig_write_count; + kcs->write_pos = 0; + kcs->read_pos = 0; + kcs->state = KCS_WAIT_WRITE_START; + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + write_cmd(kcs, KCS_WRITE_START); +} + +static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data, + unsigned int size) +{ + unsigned int i; + + if (size < 2) + return IPMI_REQ_LEN_INVALID_ERR; + if (size > MAX_KCS_WRITE_SIZE) + return IPMI_REQ_LEN_EXCEEDED_ERR; + + if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED)) + return IPMI_NOT_IN_MY_STATE_ERR; + + if (kcs_debug & KCS_DEBUG_MSG) { + printk(KERN_DEBUG "start_kcs_transaction -"); + for (i = 0; i < size; i++) + printk(" %02x", (unsigned char) (data [i])); + printk("\n"); + } + kcs->error_retries = 0; + memcpy(kcs->write_data, data, size); + kcs->write_count = size; + kcs->orig_write_count = size; + kcs->write_pos = 0; + kcs->read_pos = 0; + kcs->state = KCS_START_OP; + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + return 0; +} + +static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data, + unsigned int length) +{ + if (length < kcs->read_pos) { + kcs->read_pos = length; + kcs->truncated = 1; + } + + memcpy(data, kcs->read_data, kcs->read_pos); + + if ((length >= 3) && (kcs->read_pos < 3)) { + /* Guarantee that we return at least 3 bytes, with an + error in the third byte if it is too short. */ + data[2] = IPMI_ERR_UNSPECIFIED; + kcs->read_pos = 3; + } + if (kcs->truncated) { + /* + * Report a truncated error. We might overwrite + * another error, but that's too bad, the user needs + * to know it was truncated. + */ + data[2] = IPMI_ERR_MSG_TRUNCATED; + kcs->truncated = 0; + } + + return kcs->read_pos; +} + +/* + * This implements the state machine defined in the IPMI manual, see + * that for details on how this works. Divide that flowchart into + * sections delimited by "Wait for IBF" and this will become clear. + */ +static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) +{ + unsigned char status; + unsigned char state; + + status = read_status(kcs); + + if (kcs_debug & KCS_DEBUG_STATES) + printk(KERN_DEBUG "KCS: State = %d, %x\n", kcs->state, status); + + /* All states wait for ibf, so just do it here. */ + if (!check_ibf(kcs, status, time)) + return SI_SM_CALL_WITH_DELAY; + + /* Just about everything looks at the KCS state, so grab that, too. */ + state = GET_STATUS_STATE(status); + + switch (kcs->state) { + case KCS_IDLE: + /* If there's and interrupt source, turn it off. */ + clear_obf(kcs, status); + + if (GET_STATUS_ATN(status)) + return SI_SM_ATTN; + else + return SI_SM_IDLE; + + case KCS_START_OP: + if (state != KCS_IDLE_STATE) { + start_error_recovery(kcs, + "State machine not idle at start"); + break; + } + + clear_obf(kcs, status); + write_cmd(kcs, KCS_WRITE_START); + kcs->state = KCS_WAIT_WRITE_START; + break; + + case KCS_WAIT_WRITE_START: + if (state != KCS_WRITE_STATE) { + start_error_recovery( + kcs, + "Not in write state at write start"); + break; + } + read_data(kcs); + if (kcs->write_count == 1) { + write_cmd(kcs, KCS_WRITE_END); + kcs->state = KCS_WAIT_WRITE_END; + } else { + write_next_byte(kcs); + kcs->state = KCS_WAIT_WRITE; + } + break; + + case KCS_WAIT_WRITE: + if (state != KCS_WRITE_STATE) { + start_error_recovery(kcs, + "Not in write state for write"); + break; + } + clear_obf(kcs, status); + if (kcs->write_count == 1) { + write_cmd(kcs, KCS_WRITE_END); + kcs->state = KCS_WAIT_WRITE_END; + } else { + write_next_byte(kcs); + } + break; + + case KCS_WAIT_WRITE_END: + if (state != KCS_WRITE_STATE) { + start_error_recovery(kcs, + "Not in write state" + " for write end"); + break; + } + clear_obf(kcs, status); + write_next_byte(kcs); + kcs->state = KCS_WAIT_READ; + break; + + case KCS_WAIT_READ: + if ((state != KCS_READ_STATE) && (state != KCS_IDLE_STATE)) { + start_error_recovery( + kcs, + "Not in read or idle in read state"); + break; + } + + if (state == KCS_READ_STATE) { + if (!check_obf(kcs, status, time)) + return SI_SM_CALL_WITH_DELAY; + read_next_byte(kcs); + } else { + /* + * We don't implement this exactly like the state + * machine in the spec. Some broken hardware + * does not write the final dummy byte to the + * read register. Thus obf will never go high + * here. We just go straight to idle, and we + * handle clearing out obf in idle state if it + * happens to come in. + */ + clear_obf(kcs, status); + kcs->orig_write_count = 0; + kcs->state = KCS_IDLE; + return SI_SM_TRANSACTION_COMPLETE; + } + break; + + case KCS_ERROR0: + clear_obf(kcs, status); + status = read_status(kcs); + if (GET_STATUS_OBF(status)) + /* controller isn't responding */ + if (time_before(jiffies, kcs->error0_timeout)) + return SI_SM_CALL_WITH_TICK_DELAY; + write_cmd(kcs, KCS_GET_STATUS_ABORT); + kcs->state = KCS_ERROR1; + break; + + case KCS_ERROR1: + clear_obf(kcs, status); + write_data(kcs, 0); + kcs->state = KCS_ERROR2; + break; + + case KCS_ERROR2: + if (state != KCS_READ_STATE) { + start_error_recovery(kcs, + "Not in read state for error2"); + break; + } + if (!check_obf(kcs, status, time)) + return SI_SM_CALL_WITH_DELAY; + + clear_obf(kcs, status); + write_data(kcs, KCS_READ_BYTE); + kcs->state = KCS_ERROR3; + break; + + case KCS_ERROR3: + if (state != KCS_IDLE_STATE) { + start_error_recovery(kcs, + "Not in idle state for error3"); + break; + } + + if (!check_obf(kcs, status, time)) + return SI_SM_CALL_WITH_DELAY; + + clear_obf(kcs, status); + if (kcs->orig_write_count) { + restart_kcs_transaction(kcs); + } else { + kcs->state = KCS_IDLE; + return SI_SM_TRANSACTION_COMPLETE; + } + break; + + case KCS_HOSED: + break; + } + + if (kcs->state == KCS_HOSED) { + init_kcs_data(kcs, kcs->io); + return SI_SM_HOSED; + } + + return SI_SM_CALL_WITHOUT_DELAY; +} + +static int kcs_size(void) +{ + return sizeof(struct si_sm_data); +} + +static int kcs_detect(struct si_sm_data *kcs) +{ + /* + * It's impossible for the KCS status register to be all 1's, + * (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. + */ + if (read_status(kcs) == 0xff) + return 1; + + return 0; +} + +static void kcs_cleanup(struct si_sm_data *kcs) +{ +} + +struct si_sm_handlers kcs_smi_handlers = { + .init_data = init_kcs_data, + .start_transaction = start_kcs_transaction, + .get_result = get_kcs_result, + .event = kcs_event, + .detect = kcs_detect, + .cleanup = kcs_cleanup, + .size = kcs_size, +}; diff --git a/kernel/drivers/char/ipmi/ipmi_msghandler.c b/kernel/drivers/char/ipmi/ipmi_msghandler.c new file mode 100644 index 000000000..bf75f6361 --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_msghandler.c @@ -0,0 +1,4615 @@ +/* + * ipmi_msghandler.c + * + * Incoming and outgoing message routing for an IPMI interface. + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/poll.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/ipmi.h> +#include <linux/ipmi_smi.h> +#include <linux/notifier.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/rcupdate.h> +#include <linux/interrupt.h> + +#define PFX "IPMI message handler: " + +#define IPMI_DRIVER_VERSION "39.2" + +static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); +static int ipmi_init_msghandler(void); +static void smi_recv_tasklet(unsigned long); +static void handle_new_recv_msgs(ipmi_smi_t intf); +static void need_waiter(ipmi_smi_t intf); +static int handle_one_recv_msg(ipmi_smi_t intf, + struct ipmi_smi_msg *msg); + +static int initialized; + +#ifdef CONFIG_PROC_FS +static struct proc_dir_entry *proc_ipmi_root; +#endif /* CONFIG_PROC_FS */ + +/* Remain in auto-maintenance mode for this amount of time (in ms). */ +#define IPMI_MAINTENANCE_MODE_TIMEOUT 30000 + +#define MAX_EVENTS_IN_QUEUE 25 + +/* + * Don't let a message sit in a queue forever, always time it with at lest + * the max message timer. This is in milliseconds. + */ +#define MAX_MSG_TIMEOUT 60000 + +/* Call every ~1000 ms. */ +#define IPMI_TIMEOUT_TIME 1000 + +/* How many jiffies does it take to get to the timeout time. */ +#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000) + +/* + * Request events from the queue every second (this is the number of + * IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the + * future, IPMI will add a way to know immediately if an event is in + * the queue and this silliness can go away. + */ +#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME)) + +/* + * The main "user" data structure. + */ +struct ipmi_user { + struct list_head link; + + /* Set to false when the user is destroyed. */ + bool valid; + + struct kref refcount; + + /* The upper layer that handles receive messages. */ + struct ipmi_user_hndl *handler; + void *handler_data; + + /* The interface this user is bound to. */ + ipmi_smi_t intf; + + /* Does this interface receive IPMI events? */ + bool gets_events; +}; + +struct cmd_rcvr { + struct list_head link; + + ipmi_user_t user; + unsigned char netfn; + unsigned char cmd; + unsigned int chans; + + /* + * This is used to form a linked lised during mass deletion. + * Since this is in an RCU list, we cannot use the link above + * or change any data until the RCU period completes. So we + * use this next variable during mass deletion so we can have + * a list and don't have to wait and restart the search on + * every individual deletion of a command. + */ + struct cmd_rcvr *next; +}; + +struct seq_table { + unsigned int inuse : 1; + unsigned int broadcast : 1; + + unsigned long timeout; + unsigned long orig_timeout; + unsigned int retries_left; + + /* + * To verify on an incoming send message response that this is + * the message that the response is for, we keep a sequence id + * and increment it every time we send a message. + */ + long seqid; + + /* + * This is held so we can properly respond to the message on a + * timeout, and it is used to hold the temporary data for + * retransmission, too. + */ + struct ipmi_recv_msg *recv_msg; +}; + +/* + * Store the information in a msgid (long) to allow us to find a + * sequence table entry from the msgid. + */ +#define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff)) + +#define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \ + do { \ + seq = ((msgid >> 26) & 0x3f); \ + seqid = (msgid & 0x3fffff); \ + } while (0) + +#define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff) + +struct ipmi_channel { + unsigned char medium; + unsigned char protocol; + + /* + * My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR, + * but may be changed by the user. + */ + unsigned char address; + + /* + * My LUN. This should generally stay the SMS LUN, but just in + * case... + */ + unsigned char lun; +}; + +#ifdef CONFIG_PROC_FS +struct ipmi_proc_entry { + char *name; + struct ipmi_proc_entry *next; +}; +#endif + +struct bmc_device { + struct platform_device pdev; + struct ipmi_device_id id; + unsigned char guid[16]; + int guid_set; + char name[16]; + struct kref usecount; +}; +#define to_bmc_device(x) container_of((x), struct bmc_device, pdev.dev) + +/* + * Various statistics for IPMI, these index stats[] in the ipmi_smi + * structure. + */ +enum ipmi_stat_indexes { + /* Commands we got from the user that were invalid. */ + IPMI_STAT_sent_invalid_commands = 0, + + /* Commands we sent to the MC. */ + IPMI_STAT_sent_local_commands, + + /* Responses from the MC that were delivered to a user. */ + IPMI_STAT_handled_local_responses, + + /* Responses from the MC that were not delivered to a user. */ + IPMI_STAT_unhandled_local_responses, + + /* Commands we sent out to the IPMB bus. */ + IPMI_STAT_sent_ipmb_commands, + + /* Commands sent on the IPMB that had errors on the SEND CMD */ + IPMI_STAT_sent_ipmb_command_errs, + + /* Each retransmit increments this count. */ + IPMI_STAT_retransmitted_ipmb_commands, + + /* + * When a message times out (runs out of retransmits) this is + * incremented. + */ + IPMI_STAT_timed_out_ipmb_commands, + + /* + * This is like above, but for broadcasts. Broadcasts are + * *not* included in the above count (they are expected to + * time out). + */ + IPMI_STAT_timed_out_ipmb_broadcasts, + + /* Responses I have sent to the IPMB bus. */ + IPMI_STAT_sent_ipmb_responses, + + /* The response was delivered to the user. */ + IPMI_STAT_handled_ipmb_responses, + + /* The response had invalid data in it. */ + IPMI_STAT_invalid_ipmb_responses, + + /* The response didn't have anyone waiting for it. */ + IPMI_STAT_unhandled_ipmb_responses, + + /* Commands we sent out to the IPMB bus. */ + IPMI_STAT_sent_lan_commands, + + /* Commands sent on the IPMB that had errors on the SEND CMD */ + IPMI_STAT_sent_lan_command_errs, + + /* Each retransmit increments this count. */ + IPMI_STAT_retransmitted_lan_commands, + + /* + * When a message times out (runs out of retransmits) this is + * incremented. + */ + IPMI_STAT_timed_out_lan_commands, + + /* Responses I have sent to the IPMB bus. */ + IPMI_STAT_sent_lan_responses, + + /* The response was delivered to the user. */ + IPMI_STAT_handled_lan_responses, + + /* The response had invalid data in it. */ + IPMI_STAT_invalid_lan_responses, + + /* The response didn't have anyone waiting for it. */ + IPMI_STAT_unhandled_lan_responses, + + /* The command was delivered to the user. */ + IPMI_STAT_handled_commands, + + /* The command had invalid data in it. */ + IPMI_STAT_invalid_commands, + + /* The command didn't have anyone waiting for it. */ + IPMI_STAT_unhandled_commands, + + /* Invalid data in an event. */ + IPMI_STAT_invalid_events, + + /* Events that were received with the proper format. */ + IPMI_STAT_events, + + /* Retransmissions on IPMB that failed. */ + IPMI_STAT_dropped_rexmit_ipmb_commands, + + /* Retransmissions on LAN that failed. */ + IPMI_STAT_dropped_rexmit_lan_commands, + + /* This *must* remain last, add new values above this. */ + IPMI_NUM_STATS +}; + + +#define IPMI_IPMB_NUM_SEQ 64 +#define IPMI_MAX_CHANNELS 16 +struct ipmi_smi { + /* What interface number are we? */ + int intf_num; + + struct kref refcount; + + /* Set when the interface is being unregistered. */ + bool in_shutdown; + + /* Used for a list of interfaces. */ + struct list_head link; + + /* + * The list of upper layers that are using me. seq_lock + * protects this. + */ + struct list_head users; + + /* Information to supply to users. */ + unsigned char ipmi_version_major; + unsigned char ipmi_version_minor; + + /* Used for wake ups at startup. */ + wait_queue_head_t waitq; + + struct bmc_device *bmc; + char *my_dev_name; + + /* + * This is the lower-layer's sender routine. Note that you + * must either be holding the ipmi_interfaces_mutex or be in + * an umpreemptible region to use this. You must fetch the + * value into a local variable and make sure it is not NULL. + */ + struct ipmi_smi_handlers *handlers; + void *send_info; + +#ifdef CONFIG_PROC_FS + /* A list of proc entries for this interface. */ + struct mutex proc_entry_lock; + struct ipmi_proc_entry *proc_entries; +#endif + + /* Driver-model device for the system interface. */ + struct device *si_dev; + + /* + * A table of sequence numbers for this interface. We use the + * sequence numbers for IPMB messages that go out of the + * interface to match them up with their responses. A routine + * is called periodically to time the items in this list. + */ + spinlock_t seq_lock; + struct seq_table seq_table[IPMI_IPMB_NUM_SEQ]; + int curr_seq; + + /* + * Messages queued for delivery. If delivery fails (out of memory + * for instance), They will stay in here to be processed later in a + * periodic timer interrupt. The tasklet is for handling received + * messages directly from the handler. + */ + spinlock_t waiting_rcv_msgs_lock; + struct list_head waiting_rcv_msgs; + atomic_t watchdog_pretimeouts_to_deliver; + struct tasklet_struct recv_tasklet; + + spinlock_t xmit_msgs_lock; + struct list_head xmit_msgs; + struct ipmi_smi_msg *curr_msg; + struct list_head hp_xmit_msgs; + + /* + * The list of command receivers that are registered for commands + * on this interface. + */ + struct mutex cmd_rcvrs_mutex; + struct list_head cmd_rcvrs; + + /* + * Events that were queues because no one was there to receive + * them. + */ + spinlock_t events_lock; /* For dealing with event stuff. */ + struct list_head waiting_events; + unsigned int waiting_events_count; /* How many events in queue? */ + char delivering_events; + char event_msg_printed; + atomic_t event_waiters; + unsigned int ticks_to_req_ev; + int last_needs_timer; + + /* + * The event receiver for my BMC, only really used at panic + * shutdown as a place to store this. + */ + unsigned char event_receiver; + unsigned char event_receiver_lun; + unsigned char local_sel_device; + unsigned char local_event_generator; + + /* For handling of maintenance mode. */ + int maintenance_mode; + bool maintenance_mode_enable; + int auto_maintenance_timeout; + spinlock_t maintenance_mode_lock; /* Used in a timer... */ + + /* + * A cheap hack, if this is non-null and a message to an + * interface comes in with a NULL user, call this routine with + * it. Note that the message will still be freed by the + * caller. This only works on the system interface. + */ + void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_recv_msg *msg); + + /* + * When we are scanning the channels for an SMI, this will + * tell which channel we are scanning. + */ + int curr_channel; + + /* Channel information */ + struct ipmi_channel channels[IPMI_MAX_CHANNELS]; + + /* Proc FS stuff. */ + struct proc_dir_entry *proc_dir; + char proc_dir_name[10]; + + atomic_t stats[IPMI_NUM_STATS]; + + /* + * run_to_completion duplicate of smb_info, smi_info + * and ipmi_serial_info structures. Used to decrease numbers of + * parameters passed by "low" level IPMI code. + */ + int run_to_completion; +}; +#define to_si_intf_from_dev(device) container_of(device, struct ipmi_smi, dev) + +/** + * The driver model view of the IPMI messaging driver. + */ +static struct platform_driver ipmidriver = { + .driver = { + .name = "ipmi", + .bus = &platform_bus_type + } +}; +static DEFINE_MUTEX(ipmidriver_mutex); + +static LIST_HEAD(ipmi_interfaces); +static DEFINE_MUTEX(ipmi_interfaces_mutex); + +/* + * List of watchers that want to know when smi's are added and deleted. + */ +static LIST_HEAD(smi_watchers); +static DEFINE_MUTEX(smi_watchers_mutex); + +#define ipmi_inc_stat(intf, stat) \ + atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat]) +#define ipmi_get_stat(intf, stat) \ + ((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat])) + +static char *addr_src_to_str[] = { "invalid", "hotmod", "hardcoded", "SPMI", + "ACPI", "SMBIOS", "PCI", + "device-tree", "default" }; + +const char *ipmi_addr_src_to_str(enum ipmi_addr_src src) +{ + if (src > SI_DEFAULT) + src = 0; /* Invalid */ + return addr_src_to_str[src]; +} +EXPORT_SYMBOL(ipmi_addr_src_to_str); + +static int is_lan_addr(struct ipmi_addr *addr) +{ + return addr->addr_type == IPMI_LAN_ADDR_TYPE; +} + +static int is_ipmb_addr(struct ipmi_addr *addr) +{ + return addr->addr_type == IPMI_IPMB_ADDR_TYPE; +} + +static int is_ipmb_bcast_addr(struct ipmi_addr *addr) +{ + return addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE; +} + +static void free_recv_msg_list(struct list_head *q) +{ + struct ipmi_recv_msg *msg, *msg2; + + list_for_each_entry_safe(msg, msg2, q, link) { + list_del(&msg->link); + ipmi_free_recv_msg(msg); + } +} + +static void free_smi_msg_list(struct list_head *q) +{ + struct ipmi_smi_msg *msg, *msg2; + + list_for_each_entry_safe(msg, msg2, q, link) { + list_del(&msg->link); + ipmi_free_smi_msg(msg); + } +} + +static void clean_up_interface_data(ipmi_smi_t intf) +{ + int i; + struct cmd_rcvr *rcvr, *rcvr2; + struct list_head list; + + tasklet_kill(&intf->recv_tasklet); + + free_smi_msg_list(&intf->waiting_rcv_msgs); + free_recv_msg_list(&intf->waiting_events); + + /* + * Wholesale remove all the entries from the list in the + * interface and wait for RCU to know that none are in use. + */ + mutex_lock(&intf->cmd_rcvrs_mutex); + INIT_LIST_HEAD(&list); + list_splice_init_rcu(&intf->cmd_rcvrs, &list, synchronize_rcu); + mutex_unlock(&intf->cmd_rcvrs_mutex); + + list_for_each_entry_safe(rcvr, rcvr2, &list, link) + kfree(rcvr); + + for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { + if ((intf->seq_table[i].inuse) + && (intf->seq_table[i].recv_msg)) + ipmi_free_recv_msg(intf->seq_table[i].recv_msg); + } +} + +static void intf_free(struct kref *ref) +{ + ipmi_smi_t intf = container_of(ref, struct ipmi_smi, refcount); + + clean_up_interface_data(intf); + kfree(intf); +} + +struct watcher_entry { + int intf_num; + ipmi_smi_t intf; + struct list_head link; +}; + +int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher) +{ + ipmi_smi_t intf; + LIST_HEAD(to_deliver); + struct watcher_entry *e, *e2; + + mutex_lock(&smi_watchers_mutex); + + mutex_lock(&ipmi_interfaces_mutex); + + /* Build a list of things to deliver. */ + list_for_each_entry(intf, &ipmi_interfaces, link) { + if (intf->intf_num == -1) + continue; + e = kmalloc(sizeof(*e), GFP_KERNEL); + if (!e) + goto out_err; + kref_get(&intf->refcount); + e->intf = intf; + e->intf_num = intf->intf_num; + list_add_tail(&e->link, &to_deliver); + } + + /* We will succeed, so add it to the list. */ + list_add(&watcher->link, &smi_watchers); + + mutex_unlock(&ipmi_interfaces_mutex); + + list_for_each_entry_safe(e, e2, &to_deliver, link) { + list_del(&e->link); + watcher->new_smi(e->intf_num, e->intf->si_dev); + kref_put(&e->intf->refcount, intf_free); + kfree(e); + } + + mutex_unlock(&smi_watchers_mutex); + + return 0; + + out_err: + mutex_unlock(&ipmi_interfaces_mutex); + mutex_unlock(&smi_watchers_mutex); + list_for_each_entry_safe(e, e2, &to_deliver, link) { + list_del(&e->link); + kref_put(&e->intf->refcount, intf_free); + kfree(e); + } + return -ENOMEM; +} +EXPORT_SYMBOL(ipmi_smi_watcher_register); + +int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher) +{ + mutex_lock(&smi_watchers_mutex); + list_del(&(watcher->link)); + mutex_unlock(&smi_watchers_mutex); + return 0; +} +EXPORT_SYMBOL(ipmi_smi_watcher_unregister); + +/* + * Must be called with smi_watchers_mutex held. + */ +static void +call_smi_watchers(int i, struct device *dev) +{ + struct ipmi_smi_watcher *w; + + list_for_each_entry(w, &smi_watchers, link) { + if (try_module_get(w->owner)) { + w->new_smi(i, dev); + module_put(w->owner); + } + } +} + +static int +ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) +{ + if (addr1->addr_type != addr2->addr_type) + return 0; + + if (addr1->channel != addr2->channel) + return 0; + + if (addr1->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { + struct ipmi_system_interface_addr *smi_addr1 + = (struct ipmi_system_interface_addr *) addr1; + struct ipmi_system_interface_addr *smi_addr2 + = (struct ipmi_system_interface_addr *) addr2; + return (smi_addr1->lun == smi_addr2->lun); + } + + if (is_ipmb_addr(addr1) || is_ipmb_bcast_addr(addr1)) { + struct ipmi_ipmb_addr *ipmb_addr1 + = (struct ipmi_ipmb_addr *) addr1; + struct ipmi_ipmb_addr *ipmb_addr2 + = (struct ipmi_ipmb_addr *) addr2; + + return ((ipmb_addr1->slave_addr == ipmb_addr2->slave_addr) + && (ipmb_addr1->lun == ipmb_addr2->lun)); + } + + if (is_lan_addr(addr1)) { + struct ipmi_lan_addr *lan_addr1 + = (struct ipmi_lan_addr *) addr1; + struct ipmi_lan_addr *lan_addr2 + = (struct ipmi_lan_addr *) addr2; + + return ((lan_addr1->remote_SWID == lan_addr2->remote_SWID) + && (lan_addr1->local_SWID == lan_addr2->local_SWID) + && (lan_addr1->session_handle + == lan_addr2->session_handle) + && (lan_addr1->lun == lan_addr2->lun)); + } + + return 1; +} + +int ipmi_validate_addr(struct ipmi_addr *addr, int len) +{ + if (len < sizeof(struct ipmi_system_interface_addr)) + return -EINVAL; + + if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { + if (addr->channel != IPMI_BMC_CHANNEL) + return -EINVAL; + return 0; + } + + if ((addr->channel == IPMI_BMC_CHANNEL) + || (addr->channel >= IPMI_MAX_CHANNELS) + || (addr->channel < 0)) + return -EINVAL; + + if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) { + if (len < sizeof(struct ipmi_ipmb_addr)) + return -EINVAL; + return 0; + } + + if (is_lan_addr(addr)) { + if (len < sizeof(struct ipmi_lan_addr)) + return -EINVAL; + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(ipmi_validate_addr); + +unsigned int ipmi_addr_length(int addr_type) +{ + if (addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) + return sizeof(struct ipmi_system_interface_addr); + + if ((addr_type == IPMI_IPMB_ADDR_TYPE) + || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) + return sizeof(struct ipmi_ipmb_addr); + + if (addr_type == IPMI_LAN_ADDR_TYPE) + return sizeof(struct ipmi_lan_addr); + + return 0; +} +EXPORT_SYMBOL(ipmi_addr_length); + +static void deliver_response(struct ipmi_recv_msg *msg) +{ + if (!msg->user) { + ipmi_smi_t intf = msg->user_msg_data; + + /* Special handling for NULL users. */ + if (intf->null_user_handler) { + intf->null_user_handler(intf, msg); + ipmi_inc_stat(intf, handled_local_responses); + } else { + /* No handler, so give up. */ + ipmi_inc_stat(intf, unhandled_local_responses); + } + ipmi_free_recv_msg(msg); + } else { + ipmi_user_t user = msg->user; + user->handler->ipmi_recv_hndl(msg, user->handler_data); + } +} + +static void +deliver_err_response(struct ipmi_recv_msg *msg, int err) +{ + msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + msg->msg_data[0] = err; + msg->msg.netfn |= 1; /* Convert to a response. */ + msg->msg.data_len = 1; + msg->msg.data = msg->msg_data; + deliver_response(msg); +} + +/* + * Find the next sequence number not being used and add the given + * message with the given timeout to the sequence table. This must be + * called with the interface's seq_lock held. + */ +static int intf_next_seq(ipmi_smi_t intf, + struct ipmi_recv_msg *recv_msg, + unsigned long timeout, + int retries, + int broadcast, + unsigned char *seq, + long *seqid) +{ + int rv = 0; + unsigned int i; + + for (i = intf->curr_seq; (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq; + i = (i+1)%IPMI_IPMB_NUM_SEQ) { + if (!intf->seq_table[i].inuse) + break; + } + + if (!intf->seq_table[i].inuse) { + intf->seq_table[i].recv_msg = recv_msg; + + /* + * Start with the maximum timeout, when the send response + * comes in we will start the real timer. + */ + intf->seq_table[i].timeout = MAX_MSG_TIMEOUT; + intf->seq_table[i].orig_timeout = timeout; + intf->seq_table[i].retries_left = retries; + intf->seq_table[i].broadcast = broadcast; + intf->seq_table[i].inuse = 1; + intf->seq_table[i].seqid = NEXT_SEQID(intf->seq_table[i].seqid); + *seq = i; + *seqid = intf->seq_table[i].seqid; + intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ; + need_waiter(intf); + } else { + rv = -EAGAIN; + } + + return rv; +} + +/* + * Return the receive message for the given sequence number and + * release the sequence number so it can be reused. Some other data + * is passed in to be sure the message matches up correctly (to help + * guard against message coming in after their timeout and the + * sequence number being reused). + */ +static int intf_find_seq(ipmi_smi_t intf, + unsigned char seq, + short channel, + unsigned char cmd, + unsigned char netfn, + struct ipmi_addr *addr, + struct ipmi_recv_msg **recv_msg) +{ + int rv = -ENODEV; + unsigned long flags; + + if (seq >= IPMI_IPMB_NUM_SEQ) + return -EINVAL; + + spin_lock_irqsave(&(intf->seq_lock), flags); + if (intf->seq_table[seq].inuse) { + struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg; + + if ((msg->addr.channel == channel) && (msg->msg.cmd == cmd) + && (msg->msg.netfn == netfn) + && (ipmi_addr_equal(addr, &(msg->addr)))) { + *recv_msg = msg; + intf->seq_table[seq].inuse = 0; + rv = 0; + } + } + spin_unlock_irqrestore(&(intf->seq_lock), flags); + + return rv; +} + + +/* Start the timer for a specific sequence table entry. */ +static int intf_start_seq_timer(ipmi_smi_t intf, + long msgid) +{ + int rv = -ENODEV; + unsigned long flags; + unsigned char seq; + unsigned long seqid; + + + GET_SEQ_FROM_MSGID(msgid, seq, seqid); + + spin_lock_irqsave(&(intf->seq_lock), flags); + /* + * We do this verification because the user can be deleted + * while a message is outstanding. + */ + if ((intf->seq_table[seq].inuse) + && (intf->seq_table[seq].seqid == seqid)) { + struct seq_table *ent = &(intf->seq_table[seq]); + ent->timeout = ent->orig_timeout; + rv = 0; + } + spin_unlock_irqrestore(&(intf->seq_lock), flags); + + return rv; +} + +/* Got an error for the send message for a specific sequence number. */ +static int intf_err_seq(ipmi_smi_t intf, + long msgid, + unsigned int err) +{ + int rv = -ENODEV; + unsigned long flags; + unsigned char seq; + unsigned long seqid; + struct ipmi_recv_msg *msg = NULL; + + + GET_SEQ_FROM_MSGID(msgid, seq, seqid); + + spin_lock_irqsave(&(intf->seq_lock), flags); + /* + * We do this verification because the user can be deleted + * while a message is outstanding. + */ + if ((intf->seq_table[seq].inuse) + && (intf->seq_table[seq].seqid == seqid)) { + struct seq_table *ent = &(intf->seq_table[seq]); + + ent->inuse = 0; + msg = ent->recv_msg; + rv = 0; + } + spin_unlock_irqrestore(&(intf->seq_lock), flags); + + if (msg) + deliver_err_response(msg, err); + + return rv; +} + + +int ipmi_create_user(unsigned int if_num, + struct ipmi_user_hndl *handler, + void *handler_data, + ipmi_user_t *user) +{ + unsigned long flags; + ipmi_user_t new_user; + int rv = 0; + ipmi_smi_t intf; + + /* + * There is no module usecount here, because it's not + * required. Since this can only be used by and called from + * other modules, they will implicitly use this module, and + * thus this can't be removed unless the other modules are + * removed. + */ + + if (handler == NULL) + return -EINVAL; + + /* + * Make sure the driver is actually initialized, this handles + * problems with initialization order. + */ + if (!initialized) { + rv = ipmi_init_msghandler(); + if (rv) + return rv; + + /* + * The init code doesn't return an error if it was turned + * off, but it won't initialize. Check that. + */ + if (!initialized) + return -ENODEV; + } + + new_user = kmalloc(sizeof(*new_user), GFP_KERNEL); + if (!new_user) + return -ENOMEM; + + mutex_lock(&ipmi_interfaces_mutex); + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + if (intf->intf_num == if_num) + goto found; + } + /* Not found, return an error */ + rv = -EINVAL; + goto out_kfree; + + found: + /* Note that each existing user holds a refcount to the interface. */ + kref_get(&intf->refcount); + + kref_init(&new_user->refcount); + new_user->handler = handler; + new_user->handler_data = handler_data; + new_user->intf = intf; + new_user->gets_events = false; + + if (!try_module_get(intf->handlers->owner)) { + rv = -ENODEV; + goto out_kref; + } + + if (intf->handlers->inc_usecount) { + rv = intf->handlers->inc_usecount(intf->send_info); + if (rv) { + module_put(intf->handlers->owner); + goto out_kref; + } + } + + /* + * Hold the lock so intf->handlers is guaranteed to be good + * until now + */ + mutex_unlock(&ipmi_interfaces_mutex); + + new_user->valid = true; + spin_lock_irqsave(&intf->seq_lock, flags); + list_add_rcu(&new_user->link, &intf->users); + spin_unlock_irqrestore(&intf->seq_lock, flags); + if (handler->ipmi_watchdog_pretimeout) { + /* User wants pretimeouts, so make sure to watch for them. */ + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + } + *user = new_user; + return 0; + +out_kref: + kref_put(&intf->refcount, intf_free); +out_kfree: + mutex_unlock(&ipmi_interfaces_mutex); + kfree(new_user); + return rv; +} +EXPORT_SYMBOL(ipmi_create_user); + +int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data) +{ + int rv = 0; + ipmi_smi_t intf; + struct ipmi_smi_handlers *handlers; + + mutex_lock(&ipmi_interfaces_mutex); + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + if (intf->intf_num == if_num) + goto found; + } + /* Not found, return an error */ + rv = -EINVAL; + mutex_unlock(&ipmi_interfaces_mutex); + return rv; + +found: + handlers = intf->handlers; + rv = -ENOSYS; + if (handlers->get_smi_info) + rv = handlers->get_smi_info(intf->send_info, data); + mutex_unlock(&ipmi_interfaces_mutex); + + return rv; +} +EXPORT_SYMBOL(ipmi_get_smi_info); + +static void free_user(struct kref *ref) +{ + ipmi_user_t user = container_of(ref, struct ipmi_user, refcount); + kfree(user); +} + +int ipmi_destroy_user(ipmi_user_t user) +{ + ipmi_smi_t intf = user->intf; + int i; + unsigned long flags; + struct cmd_rcvr *rcvr; + struct cmd_rcvr *rcvrs = NULL; + + user->valid = false; + + if (user->handler->ipmi_watchdog_pretimeout) + atomic_dec(&intf->event_waiters); + + if (user->gets_events) + atomic_dec(&intf->event_waiters); + + /* Remove the user from the interface's sequence table. */ + spin_lock_irqsave(&intf->seq_lock, flags); + list_del_rcu(&user->link); + + for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { + if (intf->seq_table[i].inuse + && (intf->seq_table[i].recv_msg->user == user)) { + intf->seq_table[i].inuse = 0; + ipmi_free_recv_msg(intf->seq_table[i].recv_msg); + } + } + spin_unlock_irqrestore(&intf->seq_lock, flags); + + /* + * Remove the user from the command receiver's table. First + * we build a list of everything (not using the standard link, + * since other things may be using it till we do + * synchronize_rcu()) then free everything in that list. + */ + mutex_lock(&intf->cmd_rcvrs_mutex); + list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { + if (rcvr->user == user) { + list_del_rcu(&rcvr->link); + rcvr->next = rcvrs; + rcvrs = rcvr; + } + } + mutex_unlock(&intf->cmd_rcvrs_mutex); + synchronize_rcu(); + while (rcvrs) { + rcvr = rcvrs; + rcvrs = rcvr->next; + kfree(rcvr); + } + + mutex_lock(&ipmi_interfaces_mutex); + if (intf->handlers) { + module_put(intf->handlers->owner); + if (intf->handlers->dec_usecount) + intf->handlers->dec_usecount(intf->send_info); + } + mutex_unlock(&ipmi_interfaces_mutex); + + kref_put(&intf->refcount, intf_free); + + kref_put(&user->refcount, free_user); + + return 0; +} +EXPORT_SYMBOL(ipmi_destroy_user); + +void ipmi_get_version(ipmi_user_t user, + unsigned char *major, + unsigned char *minor) +{ + *major = user->intf->ipmi_version_major; + *minor = user->intf->ipmi_version_minor; +} +EXPORT_SYMBOL(ipmi_get_version); + +int ipmi_set_my_address(ipmi_user_t user, + unsigned int channel, + unsigned char address) +{ + if (channel >= IPMI_MAX_CHANNELS) + return -EINVAL; + user->intf->channels[channel].address = address; + return 0; +} +EXPORT_SYMBOL(ipmi_set_my_address); + +int ipmi_get_my_address(ipmi_user_t user, + unsigned int channel, + unsigned char *address) +{ + if (channel >= IPMI_MAX_CHANNELS) + return -EINVAL; + *address = user->intf->channels[channel].address; + return 0; +} +EXPORT_SYMBOL(ipmi_get_my_address); + +int ipmi_set_my_LUN(ipmi_user_t user, + unsigned int channel, + unsigned char LUN) +{ + if (channel >= IPMI_MAX_CHANNELS) + return -EINVAL; + user->intf->channels[channel].lun = LUN & 0x3; + return 0; +} +EXPORT_SYMBOL(ipmi_set_my_LUN); + +int ipmi_get_my_LUN(ipmi_user_t user, + unsigned int channel, + unsigned char *address) +{ + if (channel >= IPMI_MAX_CHANNELS) + return -EINVAL; + *address = user->intf->channels[channel].lun; + return 0; +} +EXPORT_SYMBOL(ipmi_get_my_LUN); + +int ipmi_get_maintenance_mode(ipmi_user_t user) +{ + int mode; + unsigned long flags; + + spin_lock_irqsave(&user->intf->maintenance_mode_lock, flags); + mode = user->intf->maintenance_mode; + spin_unlock_irqrestore(&user->intf->maintenance_mode_lock, flags); + + return mode; +} +EXPORT_SYMBOL(ipmi_get_maintenance_mode); + +static void maintenance_mode_update(ipmi_smi_t intf) +{ + if (intf->handlers->set_maintenance_mode) + intf->handlers->set_maintenance_mode( + intf->send_info, intf->maintenance_mode_enable); +} + +int ipmi_set_maintenance_mode(ipmi_user_t user, int mode) +{ + int rv = 0; + unsigned long flags; + ipmi_smi_t intf = user->intf; + + spin_lock_irqsave(&intf->maintenance_mode_lock, flags); + if (intf->maintenance_mode != mode) { + switch (mode) { + case IPMI_MAINTENANCE_MODE_AUTO: + intf->maintenance_mode_enable + = (intf->auto_maintenance_timeout > 0); + break; + + case IPMI_MAINTENANCE_MODE_OFF: + intf->maintenance_mode_enable = false; + break; + + case IPMI_MAINTENANCE_MODE_ON: + intf->maintenance_mode_enable = true; + break; + + default: + rv = -EINVAL; + goto out_unlock; + } + intf->maintenance_mode = mode; + + maintenance_mode_update(intf); + } + out_unlock: + spin_unlock_irqrestore(&intf->maintenance_mode_lock, flags); + + return rv; +} +EXPORT_SYMBOL(ipmi_set_maintenance_mode); + +int ipmi_set_gets_events(ipmi_user_t user, bool val) +{ + unsigned long flags; + ipmi_smi_t intf = user->intf; + struct ipmi_recv_msg *msg, *msg2; + struct list_head msgs; + + INIT_LIST_HEAD(&msgs); + + spin_lock_irqsave(&intf->events_lock, flags); + if (user->gets_events == val) + goto out; + + user->gets_events = val; + + if (val) { + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + } else { + atomic_dec(&intf->event_waiters); + } + + if (intf->delivering_events) + /* + * Another thread is delivering events for this, so + * let it handle any new events. + */ + goto out; + + /* Deliver any queued events. */ + while (user->gets_events && !list_empty(&intf->waiting_events)) { + list_for_each_entry_safe(msg, msg2, &intf->waiting_events, link) + list_move_tail(&msg->link, &msgs); + intf->waiting_events_count = 0; + if (intf->event_msg_printed) { + printk(KERN_WARNING PFX "Event queue no longer" + " full\n"); + intf->event_msg_printed = 0; + } + + intf->delivering_events = 1; + spin_unlock_irqrestore(&intf->events_lock, flags); + + list_for_each_entry_safe(msg, msg2, &msgs, link) { + msg->user = user; + kref_get(&user->refcount); + deliver_response(msg); + } + + spin_lock_irqsave(&intf->events_lock, flags); + intf->delivering_events = 0; + } + + out: + spin_unlock_irqrestore(&intf->events_lock, flags); + + return 0; +} +EXPORT_SYMBOL(ipmi_set_gets_events); + +static struct cmd_rcvr *find_cmd_rcvr(ipmi_smi_t intf, + unsigned char netfn, + unsigned char cmd, + unsigned char chan) +{ + struct cmd_rcvr *rcvr; + + list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { + if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd) + && (rcvr->chans & (1 << chan))) + return rcvr; + } + return NULL; +} + +static int is_cmd_rcvr_exclusive(ipmi_smi_t intf, + unsigned char netfn, + unsigned char cmd, + unsigned int chans) +{ + struct cmd_rcvr *rcvr; + + list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { + if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd) + && (rcvr->chans & chans)) + return 0; + } + return 1; +} + +int ipmi_register_for_cmd(ipmi_user_t user, + unsigned char netfn, + unsigned char cmd, + unsigned int chans) +{ + ipmi_smi_t intf = user->intf; + struct cmd_rcvr *rcvr; + int rv = 0; + + + rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL); + if (!rcvr) + return -ENOMEM; + rcvr->cmd = cmd; + rcvr->netfn = netfn; + rcvr->chans = chans; + rcvr->user = user; + + mutex_lock(&intf->cmd_rcvrs_mutex); + /* Make sure the command/netfn is not already registered. */ + if (!is_cmd_rcvr_exclusive(intf, netfn, cmd, chans)) { + rv = -EBUSY; + goto out_unlock; + } + + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + + list_add_rcu(&rcvr->link, &intf->cmd_rcvrs); + + out_unlock: + mutex_unlock(&intf->cmd_rcvrs_mutex); + if (rv) + kfree(rcvr); + + return rv; +} +EXPORT_SYMBOL(ipmi_register_for_cmd); + +int ipmi_unregister_for_cmd(ipmi_user_t user, + unsigned char netfn, + unsigned char cmd, + unsigned int chans) +{ + ipmi_smi_t intf = user->intf; + struct cmd_rcvr *rcvr; + struct cmd_rcvr *rcvrs = NULL; + int i, rv = -ENOENT; + + mutex_lock(&intf->cmd_rcvrs_mutex); + for (i = 0; i < IPMI_NUM_CHANNELS; i++) { + if (((1 << i) & chans) == 0) + continue; + rcvr = find_cmd_rcvr(intf, netfn, cmd, i); + if (rcvr == NULL) + continue; + if (rcvr->user == user) { + rv = 0; + rcvr->chans &= ~chans; + if (rcvr->chans == 0) { + list_del_rcu(&rcvr->link); + rcvr->next = rcvrs; + rcvrs = rcvr; + } + } + } + mutex_unlock(&intf->cmd_rcvrs_mutex); + synchronize_rcu(); + while (rcvrs) { + atomic_dec(&intf->event_waiters); + rcvr = rcvrs; + rcvrs = rcvr->next; + kfree(rcvr); + } + return rv; +} +EXPORT_SYMBOL(ipmi_unregister_for_cmd); + +static unsigned char +ipmb_checksum(unsigned char *data, int size) +{ + unsigned char csum = 0; + + for (; size > 0; size--, data++) + csum += *data; + + return -csum; +} + +static inline void format_ipmb_msg(struct ipmi_smi_msg *smi_msg, + struct kernel_ipmi_msg *msg, + struct ipmi_ipmb_addr *ipmb_addr, + long msgid, + unsigned char ipmb_seq, + int broadcast, + unsigned char source_address, + unsigned char source_lun) +{ + int i = broadcast; + + /* Format the IPMB header data. */ + smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + smi_msg->data[1] = IPMI_SEND_MSG_CMD; + smi_msg->data[2] = ipmb_addr->channel; + if (broadcast) + smi_msg->data[3] = 0; + smi_msg->data[i+3] = ipmb_addr->slave_addr; + smi_msg->data[i+4] = (msg->netfn << 2) | (ipmb_addr->lun & 0x3); + smi_msg->data[i+5] = ipmb_checksum(&(smi_msg->data[i+3]), 2); + smi_msg->data[i+6] = source_address; + smi_msg->data[i+7] = (ipmb_seq << 2) | source_lun; + smi_msg->data[i+8] = msg->cmd; + + /* Now tack on the data to the message. */ + if (msg->data_len > 0) + memcpy(&(smi_msg->data[i+9]), msg->data, + msg->data_len); + smi_msg->data_size = msg->data_len + 9; + + /* Now calculate the checksum and tack it on. */ + smi_msg->data[i+smi_msg->data_size] + = ipmb_checksum(&(smi_msg->data[i+6]), + smi_msg->data_size-6); + + /* + * Add on the checksum size and the offset from the + * broadcast. + */ + smi_msg->data_size += 1 + i; + + smi_msg->msgid = msgid; +} + +static inline void format_lan_msg(struct ipmi_smi_msg *smi_msg, + struct kernel_ipmi_msg *msg, + struct ipmi_lan_addr *lan_addr, + long msgid, + unsigned char ipmb_seq, + unsigned char source_lun) +{ + /* Format the IPMB header data. */ + smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + smi_msg->data[1] = IPMI_SEND_MSG_CMD; + smi_msg->data[2] = lan_addr->channel; + smi_msg->data[3] = lan_addr->session_handle; + smi_msg->data[4] = lan_addr->remote_SWID; + smi_msg->data[5] = (msg->netfn << 2) | (lan_addr->lun & 0x3); + smi_msg->data[6] = ipmb_checksum(&(smi_msg->data[4]), 2); + smi_msg->data[7] = lan_addr->local_SWID; + smi_msg->data[8] = (ipmb_seq << 2) | source_lun; + smi_msg->data[9] = msg->cmd; + + /* Now tack on the data to the message. */ + if (msg->data_len > 0) + memcpy(&(smi_msg->data[10]), msg->data, + msg->data_len); + smi_msg->data_size = msg->data_len + 10; + + /* Now calculate the checksum and tack it on. */ + smi_msg->data[smi_msg->data_size] + = ipmb_checksum(&(smi_msg->data[7]), + smi_msg->data_size-7); + + /* + * Add on the checksum size and the offset from the + * broadcast. + */ + smi_msg->data_size += 1; + + smi_msg->msgid = msgid; +} + +static struct ipmi_smi_msg *smi_add_send_msg(ipmi_smi_t intf, + struct ipmi_smi_msg *smi_msg, + int priority) +{ + if (intf->curr_msg) { + if (priority > 0) + list_add_tail(&smi_msg->link, &intf->hp_xmit_msgs); + else + list_add_tail(&smi_msg->link, &intf->xmit_msgs); + smi_msg = NULL; + } else { + intf->curr_msg = smi_msg; + } + + return smi_msg; +} + + +static void smi_send(ipmi_smi_t intf, struct ipmi_smi_handlers *handlers, + struct ipmi_smi_msg *smi_msg, int priority) +{ + int run_to_completion = intf->run_to_completion; + + if (run_to_completion) { + smi_msg = smi_add_send_msg(intf, smi_msg, priority); + } else { + unsigned long flags; + + spin_lock_irqsave(&intf->xmit_msgs_lock, flags); + smi_msg = smi_add_send_msg(intf, smi_msg, priority); + spin_unlock_irqrestore(&intf->xmit_msgs_lock, flags); + } + + if (smi_msg) + handlers->sender(intf->send_info, smi_msg); +} + +/* + * Separate from ipmi_request so that the user does not have to be + * supplied in certain circumstances (mainly at panic time). If + * messages are supplied, they will be freed, even if an error + * occurs. + */ +static int i_ipmi_request(ipmi_user_t user, + ipmi_smi_t intf, + struct ipmi_addr *addr, + long msgid, + struct kernel_ipmi_msg *msg, + void *user_msg_data, + void *supplied_smi, + struct ipmi_recv_msg *supplied_recv, + int priority, + unsigned char source_address, + unsigned char source_lun, + int retries, + unsigned int retry_time_ms) +{ + int rv = 0; + struct ipmi_smi_msg *smi_msg; + struct ipmi_recv_msg *recv_msg; + unsigned long flags; + + + if (supplied_recv) + recv_msg = supplied_recv; + else { + recv_msg = ipmi_alloc_recv_msg(); + if (recv_msg == NULL) + return -ENOMEM; + } + recv_msg->user_msg_data = user_msg_data; + + if (supplied_smi) + smi_msg = (struct ipmi_smi_msg *) supplied_smi; + else { + smi_msg = ipmi_alloc_smi_msg(); + if (smi_msg == NULL) { + ipmi_free_recv_msg(recv_msg); + return -ENOMEM; + } + } + + rcu_read_lock(); + if (intf->in_shutdown) { + rv = -ENODEV; + goto out_err; + } + + recv_msg->user = user; + if (user) + kref_get(&user->refcount); + recv_msg->msgid = msgid; + /* + * Store the message to send in the receive message so timeout + * responses can get the proper response data. + */ + recv_msg->msg = *msg; + + if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { + struct ipmi_system_interface_addr *smi_addr; + + if (msg->netfn & 1) { + /* Responses are not allowed to the SMI. */ + rv = -EINVAL; + goto out_err; + } + + smi_addr = (struct ipmi_system_interface_addr *) addr; + if (smi_addr->lun > 3) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + + memcpy(&recv_msg->addr, smi_addr, sizeof(*smi_addr)); + + if ((msg->netfn == IPMI_NETFN_APP_REQUEST) + && ((msg->cmd == IPMI_SEND_MSG_CMD) + || (msg->cmd == IPMI_GET_MSG_CMD) + || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD))) { + /* + * We don't let the user do these, since we manage + * the sequence numbers. + */ + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + + if (((msg->netfn == IPMI_NETFN_APP_REQUEST) + && ((msg->cmd == IPMI_COLD_RESET_CMD) + || (msg->cmd == IPMI_WARM_RESET_CMD))) + || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST)) { + spin_lock_irqsave(&intf->maintenance_mode_lock, flags); + intf->auto_maintenance_timeout + = IPMI_MAINTENANCE_MODE_TIMEOUT; + if (!intf->maintenance_mode + && !intf->maintenance_mode_enable) { + intf->maintenance_mode_enable = true; + maintenance_mode_update(intf); + } + spin_unlock_irqrestore(&intf->maintenance_mode_lock, + flags); + } + + if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EMSGSIZE; + goto out_err; + } + + smi_msg->data[0] = (msg->netfn << 2) | (smi_addr->lun & 0x3); + smi_msg->data[1] = msg->cmd; + smi_msg->msgid = msgid; + smi_msg->user_data = recv_msg; + if (msg->data_len > 0) + memcpy(&(smi_msg->data[2]), msg->data, msg->data_len); + smi_msg->data_size = msg->data_len + 2; + ipmi_inc_stat(intf, sent_local_commands); + } else if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) { + struct ipmi_ipmb_addr *ipmb_addr; + unsigned char ipmb_seq; + long seqid; + int broadcast = 0; + + if (addr->channel >= IPMI_MAX_CHANNELS) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + + if (intf->channels[addr->channel].medium + != IPMI_CHANNEL_MEDIUM_IPMB) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + + if (retries < 0) { + if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) + retries = 0; /* Don't retry broadcasts. */ + else + retries = 4; + } + if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) { + /* + * Broadcasts add a zero at the beginning of the + * message, but otherwise is the same as an IPMB + * address. + */ + addr->addr_type = IPMI_IPMB_ADDR_TYPE; + broadcast = 1; + } + + + /* Default to 1 second retries. */ + if (retry_time_ms == 0) + retry_time_ms = 1000; + + /* + * 9 for the header and 1 for the checksum, plus + * possibly one for the broadcast. + */ + if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EMSGSIZE; + goto out_err; + } + + ipmb_addr = (struct ipmi_ipmb_addr *) addr; + if (ipmb_addr->lun > 3) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + + memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr)); + + if (recv_msg->msg.netfn & 0x1) { + /* + * It's a response, so use the user's sequence + * from msgid. + */ + ipmi_inc_stat(intf, sent_ipmb_responses); + format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid, + msgid, broadcast, + source_address, source_lun); + + /* + * Save the receive message so we can use it + * to deliver the response. + */ + smi_msg->user_data = recv_msg; + } else { + /* It's a command, so get a sequence for it. */ + + spin_lock_irqsave(&(intf->seq_lock), flags); + + /* + * Create a sequence number with a 1 second + * timeout and 4 retries. + */ + rv = intf_next_seq(intf, + recv_msg, + retry_time_ms, + retries, + broadcast, + &ipmb_seq, + &seqid); + if (rv) { + /* + * We have used up all the sequence numbers, + * probably, so abort. + */ + spin_unlock_irqrestore(&(intf->seq_lock), + flags); + goto out_err; + } + + ipmi_inc_stat(intf, sent_ipmb_commands); + + /* + * Store the sequence number in the message, + * so that when the send message response + * comes back we can start the timer. + */ + format_ipmb_msg(smi_msg, msg, ipmb_addr, + STORE_SEQ_IN_MSGID(ipmb_seq, seqid), + ipmb_seq, broadcast, + source_address, source_lun); + + /* + * Copy the message into the recv message data, so we + * can retransmit it later if necessary. + */ + memcpy(recv_msg->msg_data, smi_msg->data, + smi_msg->data_size); + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = smi_msg->data_size; + + /* + * We don't unlock until here, because we need + * to copy the completed message into the + * recv_msg before we release the lock. + * Otherwise, race conditions may bite us. I + * know that's pretty paranoid, but I prefer + * to be correct. + */ + spin_unlock_irqrestore(&(intf->seq_lock), flags); + } + } else if (is_lan_addr(addr)) { + struct ipmi_lan_addr *lan_addr; + unsigned char ipmb_seq; + long seqid; + + if (addr->channel >= IPMI_MAX_CHANNELS) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + + if ((intf->channels[addr->channel].medium + != IPMI_CHANNEL_MEDIUM_8023LAN) + && (intf->channels[addr->channel].medium + != IPMI_CHANNEL_MEDIUM_ASYNC)) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + + retries = 4; + + /* Default to 1 second retries. */ + if (retry_time_ms == 0) + retry_time_ms = 1000; + + /* 11 for the header and 1 for the checksum. */ + if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EMSGSIZE; + goto out_err; + } + + lan_addr = (struct ipmi_lan_addr *) addr; + if (lan_addr->lun > 3) { + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + + memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr)); + + if (recv_msg->msg.netfn & 0x1) { + /* + * It's a response, so use the user's sequence + * from msgid. + */ + ipmi_inc_stat(intf, sent_lan_responses); + format_lan_msg(smi_msg, msg, lan_addr, msgid, + msgid, source_lun); + + /* + * Save the receive message so we can use it + * to deliver the response. + */ + smi_msg->user_data = recv_msg; + } else { + /* It's a command, so get a sequence for it. */ + + spin_lock_irqsave(&(intf->seq_lock), flags); + + /* + * Create a sequence number with a 1 second + * timeout and 4 retries. + */ + rv = intf_next_seq(intf, + recv_msg, + retry_time_ms, + retries, + 0, + &ipmb_seq, + &seqid); + if (rv) { + /* + * We have used up all the sequence numbers, + * probably, so abort. + */ + spin_unlock_irqrestore(&(intf->seq_lock), + flags); + goto out_err; + } + + ipmi_inc_stat(intf, sent_lan_commands); + + /* + * Store the sequence number in the message, + * so that when the send message response + * comes back we can start the timer. + */ + format_lan_msg(smi_msg, msg, lan_addr, + STORE_SEQ_IN_MSGID(ipmb_seq, seqid), + ipmb_seq, source_lun); + + /* + * Copy the message into the recv message data, so we + * can retransmit it later if necessary. + */ + memcpy(recv_msg->msg_data, smi_msg->data, + smi_msg->data_size); + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = smi_msg->data_size; + + /* + * We don't unlock until here, because we need + * to copy the completed message into the + * recv_msg before we release the lock. + * Otherwise, race conditions may bite us. I + * know that's pretty paranoid, but I prefer + * to be correct. + */ + spin_unlock_irqrestore(&(intf->seq_lock), flags); + } + } else { + /* Unknown address type. */ + ipmi_inc_stat(intf, sent_invalid_commands); + rv = -EINVAL; + goto out_err; + } + +#ifdef DEBUG_MSGING + { + int m; + for (m = 0; m < smi_msg->data_size; m++) + printk(" %2.2x", smi_msg->data[m]); + printk("\n"); + } +#endif + + smi_send(intf, intf->handlers, smi_msg, priority); + rcu_read_unlock(); + + return 0; + + out_err: + rcu_read_unlock(); + ipmi_free_smi_msg(smi_msg); + ipmi_free_recv_msg(recv_msg); + return rv; +} + +static int check_addr(ipmi_smi_t intf, + struct ipmi_addr *addr, + unsigned char *saddr, + unsigned char *lun) +{ + if (addr->channel >= IPMI_MAX_CHANNELS) + return -EINVAL; + *lun = intf->channels[addr->channel].lun; + *saddr = intf->channels[addr->channel].address; + return 0; +} + +int ipmi_request_settime(ipmi_user_t user, + struct ipmi_addr *addr, + long msgid, + struct kernel_ipmi_msg *msg, + void *user_msg_data, + int priority, + int retries, + unsigned int retry_time_ms) +{ + unsigned char saddr = 0, lun = 0; + int rv; + + if (!user) + return -EINVAL; + rv = check_addr(user->intf, addr, &saddr, &lun); + if (rv) + return rv; + return i_ipmi_request(user, + user->intf, + addr, + msgid, + msg, + user_msg_data, + NULL, NULL, + priority, + saddr, + lun, + retries, + retry_time_ms); +} +EXPORT_SYMBOL(ipmi_request_settime); + +int ipmi_request_supply_msgs(ipmi_user_t user, + struct ipmi_addr *addr, + long msgid, + struct kernel_ipmi_msg *msg, + void *user_msg_data, + void *supplied_smi, + struct ipmi_recv_msg *supplied_recv, + int priority) +{ + unsigned char saddr = 0, lun = 0; + int rv; + + if (!user) + return -EINVAL; + rv = check_addr(user->intf, addr, &saddr, &lun); + if (rv) + return rv; + return i_ipmi_request(user, + user->intf, + addr, + msgid, + msg, + user_msg_data, + supplied_smi, + supplied_recv, + priority, + saddr, + lun, + -1, 0); +} +EXPORT_SYMBOL(ipmi_request_supply_msgs); + +#ifdef CONFIG_PROC_FS +static int smi_ipmb_proc_show(struct seq_file *m, void *v) +{ + ipmi_smi_t intf = m->private; + int i; + + seq_printf(m, "%x", intf->channels[0].address); + for (i = 1; i < IPMI_MAX_CHANNELS; i++) + seq_printf(m, " %x", intf->channels[i].address); + seq_putc(m, '\n'); + + return 0; +} + +static int smi_ipmb_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, smi_ipmb_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations smi_ipmb_proc_ops = { + .open = smi_ipmb_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smi_version_proc_show(struct seq_file *m, void *v) +{ + ipmi_smi_t intf = m->private; + + seq_printf(m, "%u.%u\n", + ipmi_version_major(&intf->bmc->id), + ipmi_version_minor(&intf->bmc->id)); + + return 0; +} + +static int smi_version_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, smi_version_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations smi_version_proc_ops = { + .open = smi_version_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smi_stats_proc_show(struct seq_file *m, void *v) +{ + ipmi_smi_t intf = m->private; + + seq_printf(m, "sent_invalid_commands: %u\n", + ipmi_get_stat(intf, sent_invalid_commands)); + seq_printf(m, "sent_local_commands: %u\n", + ipmi_get_stat(intf, sent_local_commands)); + seq_printf(m, "handled_local_responses: %u\n", + ipmi_get_stat(intf, handled_local_responses)); + seq_printf(m, "unhandled_local_responses: %u\n", + ipmi_get_stat(intf, unhandled_local_responses)); + seq_printf(m, "sent_ipmb_commands: %u\n", + ipmi_get_stat(intf, sent_ipmb_commands)); + seq_printf(m, "sent_ipmb_command_errs: %u\n", + ipmi_get_stat(intf, sent_ipmb_command_errs)); + seq_printf(m, "retransmitted_ipmb_commands: %u\n", + ipmi_get_stat(intf, retransmitted_ipmb_commands)); + seq_printf(m, "timed_out_ipmb_commands: %u\n", + ipmi_get_stat(intf, timed_out_ipmb_commands)); + seq_printf(m, "timed_out_ipmb_broadcasts: %u\n", + ipmi_get_stat(intf, timed_out_ipmb_broadcasts)); + seq_printf(m, "sent_ipmb_responses: %u\n", + ipmi_get_stat(intf, sent_ipmb_responses)); + seq_printf(m, "handled_ipmb_responses: %u\n", + ipmi_get_stat(intf, handled_ipmb_responses)); + seq_printf(m, "invalid_ipmb_responses: %u\n", + ipmi_get_stat(intf, invalid_ipmb_responses)); + seq_printf(m, "unhandled_ipmb_responses: %u\n", + ipmi_get_stat(intf, unhandled_ipmb_responses)); + seq_printf(m, "sent_lan_commands: %u\n", + ipmi_get_stat(intf, sent_lan_commands)); + seq_printf(m, "sent_lan_command_errs: %u\n", + ipmi_get_stat(intf, sent_lan_command_errs)); + seq_printf(m, "retransmitted_lan_commands: %u\n", + ipmi_get_stat(intf, retransmitted_lan_commands)); + seq_printf(m, "timed_out_lan_commands: %u\n", + ipmi_get_stat(intf, timed_out_lan_commands)); + seq_printf(m, "sent_lan_responses: %u\n", + ipmi_get_stat(intf, sent_lan_responses)); + seq_printf(m, "handled_lan_responses: %u\n", + ipmi_get_stat(intf, handled_lan_responses)); + seq_printf(m, "invalid_lan_responses: %u\n", + ipmi_get_stat(intf, invalid_lan_responses)); + seq_printf(m, "unhandled_lan_responses: %u\n", + ipmi_get_stat(intf, unhandled_lan_responses)); + seq_printf(m, "handled_commands: %u\n", + ipmi_get_stat(intf, handled_commands)); + seq_printf(m, "invalid_commands: %u\n", + ipmi_get_stat(intf, invalid_commands)); + seq_printf(m, "unhandled_commands: %u\n", + ipmi_get_stat(intf, unhandled_commands)); + seq_printf(m, "invalid_events: %u\n", + ipmi_get_stat(intf, invalid_events)); + seq_printf(m, "events: %u\n", + ipmi_get_stat(intf, events)); + seq_printf(m, "failed rexmit LAN msgs: %u\n", + ipmi_get_stat(intf, dropped_rexmit_lan_commands)); + seq_printf(m, "failed rexmit IPMB msgs: %u\n", + ipmi_get_stat(intf, dropped_rexmit_ipmb_commands)); + return 0; +} + +static int smi_stats_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, smi_stats_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations smi_stats_proc_ops = { + .open = smi_stats_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif /* CONFIG_PROC_FS */ + +int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, + const struct file_operations *proc_ops, + void *data) +{ + int rv = 0; +#ifdef CONFIG_PROC_FS + struct proc_dir_entry *file; + struct ipmi_proc_entry *entry; + + /* Create a list element. */ + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + entry->name = kstrdup(name, GFP_KERNEL); + if (!entry->name) { + kfree(entry); + return -ENOMEM; + } + + file = proc_create_data(name, 0, smi->proc_dir, proc_ops, data); + if (!file) { + kfree(entry->name); + kfree(entry); + rv = -ENOMEM; + } else { + mutex_lock(&smi->proc_entry_lock); + /* Stick it on the list. */ + entry->next = smi->proc_entries; + smi->proc_entries = entry; + mutex_unlock(&smi->proc_entry_lock); + } +#endif /* CONFIG_PROC_FS */ + + return rv; +} +EXPORT_SYMBOL(ipmi_smi_add_proc_entry); + +static int add_proc_entries(ipmi_smi_t smi, int num) +{ + int rv = 0; + +#ifdef CONFIG_PROC_FS + sprintf(smi->proc_dir_name, "%d", num); + smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root); + if (!smi->proc_dir) + rv = -ENOMEM; + + if (rv == 0) + rv = ipmi_smi_add_proc_entry(smi, "stats", + &smi_stats_proc_ops, + smi); + + if (rv == 0) + rv = ipmi_smi_add_proc_entry(smi, "ipmb", + &smi_ipmb_proc_ops, + smi); + + if (rv == 0) + rv = ipmi_smi_add_proc_entry(smi, "version", + &smi_version_proc_ops, + smi); +#endif /* CONFIG_PROC_FS */ + + return rv; +} + +static void remove_proc_entries(ipmi_smi_t smi) +{ +#ifdef CONFIG_PROC_FS + struct ipmi_proc_entry *entry; + + mutex_lock(&smi->proc_entry_lock); + while (smi->proc_entries) { + entry = smi->proc_entries; + smi->proc_entries = entry->next; + + remove_proc_entry(entry->name, smi->proc_dir); + kfree(entry->name); + kfree(entry); + } + mutex_unlock(&smi->proc_entry_lock); + remove_proc_entry(smi->proc_dir_name, proc_ipmi_root); +#endif /* CONFIG_PROC_FS */ +} + +static int __find_bmc_guid(struct device *dev, void *data) +{ + unsigned char *id = data; + struct bmc_device *bmc = to_bmc_device(dev); + return memcmp(bmc->guid, id, 16) == 0; +} + +static struct bmc_device *ipmi_find_bmc_guid(struct device_driver *drv, + unsigned char *guid) +{ + struct device *dev; + + dev = driver_find_device(drv, NULL, guid, __find_bmc_guid); + if (dev) + return to_bmc_device(dev); + else + return NULL; +} + +struct prod_dev_id { + unsigned int product_id; + unsigned char device_id; +}; + +static int __find_bmc_prod_dev_id(struct device *dev, void *data) +{ + struct prod_dev_id *id = data; + struct bmc_device *bmc = to_bmc_device(dev); + + return (bmc->id.product_id == id->product_id + && bmc->id.device_id == id->device_id); +} + +static struct bmc_device *ipmi_find_bmc_prod_dev_id( + struct device_driver *drv, + unsigned int product_id, unsigned char device_id) +{ + struct prod_dev_id id = { + .product_id = product_id, + .device_id = device_id, + }; + struct device *dev; + + dev = driver_find_device(drv, NULL, &id, __find_bmc_prod_dev_id); + if (dev) + return to_bmc_device(dev); + else + return NULL; +} + +static ssize_t device_id_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 10, "%u\n", bmc->id.device_id); +} +static DEVICE_ATTR(device_id, S_IRUGO, device_id_show, NULL); + +static ssize_t provides_device_sdrs_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 10, "%u\n", + (bmc->id.device_revision & 0x80) >> 7); +} +static DEVICE_ATTR(provides_device_sdrs, S_IRUGO, provides_device_sdrs_show, + NULL); + +static ssize_t revision_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 20, "%u\n", + bmc->id.device_revision & 0x0F); +} +static DEVICE_ATTR(revision, S_IRUGO, revision_show, NULL); + +static ssize_t firmware_revision_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 20, "%u.%x\n", bmc->id.firmware_revision_1, + bmc->id.firmware_revision_2); +} +static DEVICE_ATTR(firmware_revision, S_IRUGO, firmware_revision_show, NULL); + +static ssize_t ipmi_version_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 20, "%u.%u\n", + ipmi_version_major(&bmc->id), + ipmi_version_minor(&bmc->id)); +} +static DEVICE_ATTR(ipmi_version, S_IRUGO, ipmi_version_show, NULL); + +static ssize_t add_dev_support_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 10, "0x%02x\n", + bmc->id.additional_device_support); +} +static DEVICE_ATTR(additional_device_support, S_IRUGO, add_dev_support_show, + NULL); + +static ssize_t manufacturer_id_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 20, "0x%6.6x\n", bmc->id.manufacturer_id); +} +static DEVICE_ATTR(manufacturer_id, S_IRUGO, manufacturer_id_show, NULL); + +static ssize_t product_id_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 10, "0x%4.4x\n", bmc->id.product_id); +} +static DEVICE_ATTR(product_id, S_IRUGO, product_id_show, NULL); + +static ssize_t aux_firmware_rev_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 21, "0x%02x 0x%02x 0x%02x 0x%02x\n", + bmc->id.aux_firmware_revision[3], + bmc->id.aux_firmware_revision[2], + bmc->id.aux_firmware_revision[1], + bmc->id.aux_firmware_revision[0]); +} +static DEVICE_ATTR(aux_firmware_revision, S_IRUGO, aux_firmware_rev_show, NULL); + +static ssize_t guid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct bmc_device *bmc = to_bmc_device(dev); + + return snprintf(buf, 100, "%Lx%Lx\n", + (long long) bmc->guid[0], + (long long) bmc->guid[8]); +} +static DEVICE_ATTR(guid, S_IRUGO, guid_show, NULL); + +static struct attribute *bmc_dev_attrs[] = { + &dev_attr_device_id.attr, + &dev_attr_provides_device_sdrs.attr, + &dev_attr_revision.attr, + &dev_attr_firmware_revision.attr, + &dev_attr_ipmi_version.attr, + &dev_attr_additional_device_support.attr, + &dev_attr_manufacturer_id.attr, + &dev_attr_product_id.attr, + &dev_attr_aux_firmware_revision.attr, + &dev_attr_guid.attr, + NULL +}; + +static umode_t bmc_dev_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct bmc_device *bmc = to_bmc_device(dev); + umode_t mode = attr->mode; + + if (attr == &dev_attr_aux_firmware_revision.attr) + return bmc->id.aux_firmware_revision_set ? mode : 0; + if (attr == &dev_attr_guid.attr) + return bmc->guid_set ? mode : 0; + return mode; +} + +static struct attribute_group bmc_dev_attr_group = { + .attrs = bmc_dev_attrs, + .is_visible = bmc_dev_attr_is_visible, +}; + +static const struct attribute_group *bmc_dev_attr_groups[] = { + &bmc_dev_attr_group, + NULL +}; + +static struct device_type bmc_device_type = { + .groups = bmc_dev_attr_groups, +}; + +static void +release_bmc_device(struct device *dev) +{ + kfree(to_bmc_device(dev)); +} + +static void +cleanup_bmc_device(struct kref *ref) +{ + struct bmc_device *bmc = container_of(ref, struct bmc_device, usecount); + + platform_device_unregister(&bmc->pdev); +} + +static void ipmi_bmc_unregister(ipmi_smi_t intf) +{ + struct bmc_device *bmc = intf->bmc; + + sysfs_remove_link(&intf->si_dev->kobj, "bmc"); + if (intf->my_dev_name) { + sysfs_remove_link(&bmc->pdev.dev.kobj, intf->my_dev_name); + kfree(intf->my_dev_name); + intf->my_dev_name = NULL; + } + + mutex_lock(&ipmidriver_mutex); + kref_put(&bmc->usecount, cleanup_bmc_device); + intf->bmc = NULL; + mutex_unlock(&ipmidriver_mutex); +} + +static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum) +{ + int rv; + struct bmc_device *bmc = intf->bmc; + struct bmc_device *old_bmc; + + mutex_lock(&ipmidriver_mutex); + + /* + * Try to find if there is an bmc_device struct + * representing the interfaced BMC already + */ + if (bmc->guid_set) + old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid); + else + old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, + bmc->id.product_id, + bmc->id.device_id); + + /* + * If there is already an bmc_device, free the new one, + * otherwise register the new BMC device + */ + if (old_bmc) { + kfree(bmc); + intf->bmc = old_bmc; + bmc = old_bmc; + + kref_get(&bmc->usecount); + mutex_unlock(&ipmidriver_mutex); + + printk(KERN_INFO + "ipmi: interfacing existing BMC (man_id: 0x%6.6x," + " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n", + bmc->id.manufacturer_id, + bmc->id.product_id, + bmc->id.device_id); + } else { + unsigned char orig_dev_id = bmc->id.device_id; + int warn_printed = 0; + + snprintf(bmc->name, sizeof(bmc->name), + "ipmi_bmc.%4.4x", bmc->id.product_id); + bmc->pdev.name = bmc->name; + + while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, + bmc->id.product_id, + bmc->id.device_id)) { + if (!warn_printed) { + printk(KERN_WARNING PFX + "This machine has two different BMCs" + " with the same product id and device" + " id. This is an error in the" + " firmware, but incrementing the" + " device id to work around the problem." + " Prod ID = 0x%x, Dev ID = 0x%x\n", + bmc->id.product_id, bmc->id.device_id); + warn_printed = 1; + } + bmc->id.device_id++; /* Wraps at 255 */ + if (bmc->id.device_id == orig_dev_id) { + printk(KERN_ERR PFX + "Out of device ids!\n"); + break; + } + } + + bmc->pdev.dev.driver = &ipmidriver.driver; + bmc->pdev.id = bmc->id.device_id; + bmc->pdev.dev.release = release_bmc_device; + bmc->pdev.dev.type = &bmc_device_type; + kref_init(&bmc->usecount); + + rv = platform_device_register(&bmc->pdev); + mutex_unlock(&ipmidriver_mutex); + if (rv) { + put_device(&bmc->pdev.dev); + printk(KERN_ERR + "ipmi_msghandler:" + " Unable to register bmc device: %d\n", + rv); + /* + * Don't go to out_err, you can only do that if + * the device is registered already. + */ + return rv; + } + + dev_info(intf->si_dev, "Found new BMC (man_id: 0x%6.6x, " + "prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n", + bmc->id.manufacturer_id, + bmc->id.product_id, + bmc->id.device_id); + } + + /* + * create symlink from system interface device to bmc device + * and back. + */ + rv = sysfs_create_link(&intf->si_dev->kobj, &bmc->pdev.dev.kobj, "bmc"); + if (rv) { + printk(KERN_ERR + "ipmi_msghandler: Unable to create bmc symlink: %d\n", + rv); + goto out_err; + } + + intf->my_dev_name = kasprintf(GFP_KERNEL, "ipmi%d", ifnum); + if (!intf->my_dev_name) { + rv = -ENOMEM; + printk(KERN_ERR + "ipmi_msghandler: allocate link from BMC: %d\n", + rv); + goto out_err; + } + + rv = sysfs_create_link(&bmc->pdev.dev.kobj, &intf->si_dev->kobj, + intf->my_dev_name); + if (rv) { + kfree(intf->my_dev_name); + intf->my_dev_name = NULL; + printk(KERN_ERR + "ipmi_msghandler:" + " Unable to create symlink to bmc: %d\n", + rv); + goto out_err; + } + + return 0; + +out_err: + ipmi_bmc_unregister(intf); + return rv; +} + +static int +send_guid_cmd(ipmi_smi_t intf, int chan) +{ + struct kernel_ipmi_msg msg; + struct ipmi_system_interface_addr si; + + si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + si.channel = IPMI_BMC_CHANNEL; + si.lun = 0; + + msg.netfn = IPMI_NETFN_APP_REQUEST; + msg.cmd = IPMI_GET_DEVICE_GUID_CMD; + msg.data = NULL; + msg.data_len = 0; + return i_ipmi_request(NULL, + intf, + (struct ipmi_addr *) &si, + 0, + &msg, + intf, + NULL, + NULL, + 0, + intf->channels[0].address, + intf->channels[0].lun, + -1, 0); +} + +static void +guid_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) +{ + if ((msg->addr.addr_type != IPMI_SYSTEM_INTERFACE_ADDR_TYPE) + || (msg->msg.netfn != IPMI_NETFN_APP_RESPONSE) + || (msg->msg.cmd != IPMI_GET_DEVICE_GUID_CMD)) + /* Not for me */ + return; + + if (msg->msg.data[0] != 0) { + /* Error from getting the GUID, the BMC doesn't have one. */ + intf->bmc->guid_set = 0; + goto out; + } + + if (msg->msg.data_len < 17) { + intf->bmc->guid_set = 0; + printk(KERN_WARNING PFX + "guid_handler: The GUID response from the BMC was too" + " short, it was %d but should have been 17. Assuming" + " GUID is not available.\n", + msg->msg.data_len); + goto out; + } + + memcpy(intf->bmc->guid, msg->msg.data, 16); + intf->bmc->guid_set = 1; + out: + wake_up(&intf->waitq); +} + +static void +get_guid(ipmi_smi_t intf) +{ + int rv; + + intf->bmc->guid_set = 0x2; + intf->null_user_handler = guid_handler; + rv = send_guid_cmd(intf, 0); + if (rv) + /* Send failed, no GUID available. */ + intf->bmc->guid_set = 0; + wait_event(intf->waitq, intf->bmc->guid_set != 2); + intf->null_user_handler = NULL; +} + +static int +send_channel_info_cmd(ipmi_smi_t intf, int chan) +{ + struct kernel_ipmi_msg msg; + unsigned char data[1]; + struct ipmi_system_interface_addr si; + + si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + si.channel = IPMI_BMC_CHANNEL; + si.lun = 0; + + msg.netfn = IPMI_NETFN_APP_REQUEST; + msg.cmd = IPMI_GET_CHANNEL_INFO_CMD; + msg.data = data; + msg.data_len = 1; + data[0] = chan; + return i_ipmi_request(NULL, + intf, + (struct ipmi_addr *) &si, + 0, + &msg, + intf, + NULL, + NULL, + 0, + intf->channels[0].address, + intf->channels[0].lun, + -1, 0); +} + +static void +channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) +{ + int rv = 0; + int chan; + + if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) + && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) + && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD)) { + /* It's the one we want */ + if (msg->msg.data[0] != 0) { + /* Got an error from the channel, just go on. */ + + if (msg->msg.data[0] == IPMI_INVALID_COMMAND_ERR) { + /* + * If the MC does not support this + * command, that is legal. We just + * assume it has one IPMB at channel + * zero. + */ + intf->channels[0].medium + = IPMI_CHANNEL_MEDIUM_IPMB; + intf->channels[0].protocol + = IPMI_CHANNEL_PROTOCOL_IPMB; + + intf->curr_channel = IPMI_MAX_CHANNELS; + wake_up(&intf->waitq); + goto out; + } + goto next_channel; + } + if (msg->msg.data_len < 4) { + /* Message not big enough, just go on. */ + goto next_channel; + } + chan = intf->curr_channel; + intf->channels[chan].medium = msg->msg.data[2] & 0x7f; + intf->channels[chan].protocol = msg->msg.data[3] & 0x1f; + + next_channel: + intf->curr_channel++; + if (intf->curr_channel >= IPMI_MAX_CHANNELS) + wake_up(&intf->waitq); + else + rv = send_channel_info_cmd(intf, intf->curr_channel); + + if (rv) { + /* Got an error somehow, just give up. */ + printk(KERN_WARNING PFX + "Error sending channel information for channel" + " %d: %d\n", intf->curr_channel, rv); + + intf->curr_channel = IPMI_MAX_CHANNELS; + wake_up(&intf->waitq); + } + } + out: + return; +} + +static void ipmi_poll(ipmi_smi_t intf) +{ + if (intf->handlers->poll) + intf->handlers->poll(intf->send_info); + /* In case something came in */ + handle_new_recv_msgs(intf); +} + +void ipmi_poll_interface(ipmi_user_t user) +{ + ipmi_poll(user->intf); +} +EXPORT_SYMBOL(ipmi_poll_interface); + +int ipmi_register_smi(struct ipmi_smi_handlers *handlers, + void *send_info, + struct ipmi_device_id *device_id, + struct device *si_dev, + unsigned char slave_addr) +{ + int i, j; + int rv; + ipmi_smi_t intf; + ipmi_smi_t tintf; + struct list_head *link; + + /* + * Make sure the driver is actually initialized, this handles + * problems with initialization order. + */ + if (!initialized) { + rv = ipmi_init_msghandler(); + if (rv) + return rv; + /* + * The init code doesn't return an error if it was turned + * off, but it won't initialize. Check that. + */ + if (!initialized) + return -ENODEV; + } + + intf = kzalloc(sizeof(*intf), GFP_KERNEL); + if (!intf) + return -ENOMEM; + + intf->ipmi_version_major = ipmi_version_major(device_id); + intf->ipmi_version_minor = ipmi_version_minor(device_id); + + intf->bmc = kzalloc(sizeof(*intf->bmc), GFP_KERNEL); + if (!intf->bmc) { + kfree(intf); + return -ENOMEM; + } + intf->intf_num = -1; /* Mark it invalid for now. */ + kref_init(&intf->refcount); + intf->bmc->id = *device_id; + intf->si_dev = si_dev; + for (j = 0; j < IPMI_MAX_CHANNELS; j++) { + intf->channels[j].address = IPMI_BMC_SLAVE_ADDR; + intf->channels[j].lun = 2; + } + if (slave_addr != 0) + intf->channels[0].address = slave_addr; + INIT_LIST_HEAD(&intf->users); + intf->handlers = handlers; + intf->send_info = send_info; + spin_lock_init(&intf->seq_lock); + for (j = 0; j < IPMI_IPMB_NUM_SEQ; j++) { + intf->seq_table[j].inuse = 0; + intf->seq_table[j].seqid = 0; + } + intf->curr_seq = 0; +#ifdef CONFIG_PROC_FS + mutex_init(&intf->proc_entry_lock); +#endif + spin_lock_init(&intf->waiting_rcv_msgs_lock); + INIT_LIST_HEAD(&intf->waiting_rcv_msgs); + tasklet_init(&intf->recv_tasklet, + smi_recv_tasklet, + (unsigned long) intf); + atomic_set(&intf->watchdog_pretimeouts_to_deliver, 0); + spin_lock_init(&intf->xmit_msgs_lock); + INIT_LIST_HEAD(&intf->xmit_msgs); + INIT_LIST_HEAD(&intf->hp_xmit_msgs); + spin_lock_init(&intf->events_lock); + atomic_set(&intf->event_waiters, 0); + intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME; + INIT_LIST_HEAD(&intf->waiting_events); + intf->waiting_events_count = 0; + mutex_init(&intf->cmd_rcvrs_mutex); + spin_lock_init(&intf->maintenance_mode_lock); + INIT_LIST_HEAD(&intf->cmd_rcvrs); + init_waitqueue_head(&intf->waitq); + for (i = 0; i < IPMI_NUM_STATS; i++) + atomic_set(&intf->stats[i], 0); + + intf->proc_dir = NULL; + + mutex_lock(&smi_watchers_mutex); + mutex_lock(&ipmi_interfaces_mutex); + /* Look for a hole in the numbers. */ + i = 0; + link = &ipmi_interfaces; + list_for_each_entry_rcu(tintf, &ipmi_interfaces, link) { + if (tintf->intf_num != i) { + link = &tintf->link; + break; + } + i++; + } + /* Add the new interface in numeric order. */ + if (i == 0) + list_add_rcu(&intf->link, &ipmi_interfaces); + else + list_add_tail_rcu(&intf->link, link); + + rv = handlers->start_processing(send_info, intf); + if (rv) + goto out; + + get_guid(intf); + + if ((intf->ipmi_version_major > 1) + || ((intf->ipmi_version_major == 1) + && (intf->ipmi_version_minor >= 5))) { + /* + * Start scanning the channels to see what is + * available. + */ + intf->null_user_handler = channel_handler; + intf->curr_channel = 0; + rv = send_channel_info_cmd(intf, 0); + if (rv) { + printk(KERN_WARNING PFX + "Error sending channel information for channel" + " 0, %d\n", rv); + goto out; + } + + /* Wait for the channel info to be read. */ + wait_event(intf->waitq, + intf->curr_channel >= IPMI_MAX_CHANNELS); + intf->null_user_handler = NULL; + } else { + /* Assume a single IPMB channel at zero. */ + intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; + intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB; + intf->curr_channel = IPMI_MAX_CHANNELS; + } + + if (rv == 0) + rv = add_proc_entries(intf, i); + + rv = ipmi_bmc_register(intf, i); + + out: + if (rv) { + if (intf->proc_dir) + remove_proc_entries(intf); + intf->handlers = NULL; + list_del_rcu(&intf->link); + mutex_unlock(&ipmi_interfaces_mutex); + mutex_unlock(&smi_watchers_mutex); + synchronize_rcu(); + kref_put(&intf->refcount, intf_free); + } else { + /* + * Keep memory order straight for RCU readers. Make + * sure everything else is committed to memory before + * setting intf_num to mark the interface valid. + */ + smp_wmb(); + intf->intf_num = i; + mutex_unlock(&ipmi_interfaces_mutex); + /* After this point the interface is legal to use. */ + call_smi_watchers(i, intf->si_dev); + mutex_unlock(&smi_watchers_mutex); + } + + return rv; +} +EXPORT_SYMBOL(ipmi_register_smi); + +static void deliver_smi_err_response(ipmi_smi_t intf, + struct ipmi_smi_msg *msg, + unsigned char err) +{ + msg->rsp[0] = msg->data[0] | 4; + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = err; + msg->rsp_size = 3; + /* It's an error, so it will never requeue, no need to check return. */ + handle_one_recv_msg(intf, msg); +} + +static void cleanup_smi_msgs(ipmi_smi_t intf) +{ + int i; + struct seq_table *ent; + struct ipmi_smi_msg *msg; + struct list_head *entry; + struct list_head tmplist; + + /* Clear out our transmit queues and hold the messages. */ + INIT_LIST_HEAD(&tmplist); + list_splice_tail(&intf->hp_xmit_msgs, &tmplist); + list_splice_tail(&intf->xmit_msgs, &tmplist); + + /* Current message first, to preserve order */ + while (intf->curr_msg && !list_empty(&intf->waiting_rcv_msgs)) { + /* Wait for the message to clear out. */ + schedule_timeout(1); + } + + /* No need for locks, the interface is down. */ + + /* + * Return errors for all pending messages in queue and in the + * tables waiting for remote responses. + */ + while (!list_empty(&tmplist)) { + entry = tmplist.next; + list_del(entry); + msg = list_entry(entry, struct ipmi_smi_msg, link); + deliver_smi_err_response(intf, msg, IPMI_ERR_UNSPECIFIED); + } + + for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { + ent = &(intf->seq_table[i]); + if (!ent->inuse) + continue; + deliver_err_response(ent->recv_msg, IPMI_ERR_UNSPECIFIED); + } +} + +int ipmi_unregister_smi(ipmi_smi_t intf) +{ + struct ipmi_smi_watcher *w; + int intf_num = intf->intf_num; + ipmi_user_t user; + + ipmi_bmc_unregister(intf); + + mutex_lock(&smi_watchers_mutex); + mutex_lock(&ipmi_interfaces_mutex); + intf->intf_num = -1; + intf->in_shutdown = true; + list_del_rcu(&intf->link); + mutex_unlock(&ipmi_interfaces_mutex); + synchronize_rcu(); + + cleanup_smi_msgs(intf); + + /* Clean up the effects of users on the lower-level software. */ + mutex_lock(&ipmi_interfaces_mutex); + rcu_read_lock(); + list_for_each_entry_rcu(user, &intf->users, link) { + module_put(intf->handlers->owner); + if (intf->handlers->dec_usecount) + intf->handlers->dec_usecount(intf->send_info); + } + rcu_read_unlock(); + intf->handlers = NULL; + mutex_unlock(&ipmi_interfaces_mutex); + + remove_proc_entries(intf); + + /* + * Call all the watcher interfaces to tell them that + * an interface is gone. + */ + list_for_each_entry(w, &smi_watchers, link) + w->smi_gone(intf_num); + mutex_unlock(&smi_watchers_mutex); + + kref_put(&intf->refcount, intf_free); + return 0; +} +EXPORT_SYMBOL(ipmi_unregister_smi); + +static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct ipmi_ipmb_addr ipmb_addr; + struct ipmi_recv_msg *recv_msg; + + /* + * This is 11, not 10, because the response must contain a + * completion code. + */ + if (msg->rsp_size < 11) { + /* Message not big enough, just ignore it. */ + ipmi_inc_stat(intf, invalid_ipmb_responses); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb_addr.slave_addr = msg->rsp[6]; + ipmb_addr.channel = msg->rsp[3] & 0x0f; + ipmb_addr.lun = msg->rsp[7] & 3; + + /* + * It's a response from a remote entity. Look up the sequence + * number and handle the response. + */ + if (intf_find_seq(intf, + msg->rsp[7] >> 2, + msg->rsp[3] & 0x0f, + msg->rsp[8], + (msg->rsp[4] >> 2) & (~1), + (struct ipmi_addr *) &(ipmb_addr), + &recv_msg)) { + /* + * We were unable to find the sequence number, + * so just nuke the message. + */ + ipmi_inc_stat(intf, unhandled_ipmb_responses); + return 0; + } + + memcpy(recv_msg->msg_data, + &(msg->rsp[9]), + msg->rsp_size - 9); + /* + * The other fields matched, so no need to set them, except + * for netfn, which needs to be the response that was + * returned, not the request value. + */ + recv_msg->msg.netfn = msg->rsp[4] >> 2; + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = msg->rsp_size - 10; + recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + ipmi_inc_stat(intf, handled_ipmb_responses); + deliver_response(recv_msg); + + return 0; +} + +static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct cmd_rcvr *rcvr; + int rv = 0; + unsigned char netfn; + unsigned char cmd; + unsigned char chan; + ipmi_user_t user = NULL; + struct ipmi_ipmb_addr *ipmb_addr; + struct ipmi_recv_msg *recv_msg; + + if (msg->rsp_size < 10) { + /* Message not big enough, just ignore it. */ + ipmi_inc_stat(intf, invalid_commands); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + netfn = msg->rsp[4] >> 2; + cmd = msg->rsp[8]; + chan = msg->rsp[3] & 0xf; + + rcu_read_lock(); + rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); + if (rcvr) { + user = rcvr->user; + kref_get(&user->refcount); + } else + user = NULL; + rcu_read_unlock(); + + if (user == NULL) { + /* We didn't find a user, deliver an error response. */ + ipmi_inc_stat(intf, unhandled_commands); + + msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg->data[1] = IPMI_SEND_MSG_CMD; + msg->data[2] = msg->rsp[3]; + msg->data[3] = msg->rsp[6]; + msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3); + msg->data[5] = ipmb_checksum(&(msg->data[3]), 2); + msg->data[6] = intf->channels[msg->rsp[3] & 0xf].address; + /* rqseq/lun */ + msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3); + msg->data[8] = msg->rsp[8]; /* cmd */ + msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE; + msg->data[10] = ipmb_checksum(&(msg->data[6]), 4); + msg->data_size = 11; + +#ifdef DEBUG_MSGING + { + int m; + printk("Invalid command:"); + for (m = 0; m < msg->data_size; m++) + printk(" %2.2x", msg->data[m]); + printk("\n"); + } +#endif + rcu_read_lock(); + if (!intf->in_shutdown) { + smi_send(intf, intf->handlers, msg, 0); + /* + * We used the message, so return the value + * that causes it to not be freed or + * queued. + */ + rv = -1; + } + rcu_read_unlock(); + } else { + /* Deliver the message to the user. */ + ipmi_inc_stat(intf, handled_commands); + + recv_msg = ipmi_alloc_recv_msg(); + if (!recv_msg) { + /* + * We couldn't allocate memory for the + * message, so requeue it for handling + * later. + */ + rv = 1; + kref_put(&user->refcount, free_user); + } else { + /* Extract the source address from the data. */ + ipmb_addr = (struct ipmi_ipmb_addr *) &recv_msg->addr; + ipmb_addr->addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb_addr->slave_addr = msg->rsp[6]; + ipmb_addr->lun = msg->rsp[7] & 3; + ipmb_addr->channel = msg->rsp[3] & 0xf; + + /* + * Extract the rest of the message information + * from the IPMB header. + */ + recv_msg->user = user; + recv_msg->recv_type = IPMI_CMD_RECV_TYPE; + recv_msg->msgid = msg->rsp[7] >> 2; + recv_msg->msg.netfn = msg->rsp[4] >> 2; + recv_msg->msg.cmd = msg->rsp[8]; + recv_msg->msg.data = recv_msg->msg_data; + + /* + * We chop off 10, not 9 bytes because the checksum + * at the end also needs to be removed. + */ + recv_msg->msg.data_len = msg->rsp_size - 10; + memcpy(recv_msg->msg_data, + &(msg->rsp[9]), + msg->rsp_size - 10); + deliver_response(recv_msg); + } + } + + return rv; +} + +static int handle_lan_get_msg_rsp(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct ipmi_lan_addr lan_addr; + struct ipmi_recv_msg *recv_msg; + + + /* + * This is 13, not 12, because the response must contain a + * completion code. + */ + if (msg->rsp_size < 13) { + /* Message not big enough, just ignore it. */ + ipmi_inc_stat(intf, invalid_lan_responses); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + lan_addr.addr_type = IPMI_LAN_ADDR_TYPE; + lan_addr.session_handle = msg->rsp[4]; + lan_addr.remote_SWID = msg->rsp[8]; + lan_addr.local_SWID = msg->rsp[5]; + lan_addr.channel = msg->rsp[3] & 0x0f; + lan_addr.privilege = msg->rsp[3] >> 4; + lan_addr.lun = msg->rsp[9] & 3; + + /* + * It's a response from a remote entity. Look up the sequence + * number and handle the response. + */ + if (intf_find_seq(intf, + msg->rsp[9] >> 2, + msg->rsp[3] & 0x0f, + msg->rsp[10], + (msg->rsp[6] >> 2) & (~1), + (struct ipmi_addr *) &(lan_addr), + &recv_msg)) { + /* + * We were unable to find the sequence number, + * so just nuke the message. + */ + ipmi_inc_stat(intf, unhandled_lan_responses); + return 0; + } + + memcpy(recv_msg->msg_data, + &(msg->rsp[11]), + msg->rsp_size - 11); + /* + * The other fields matched, so no need to set them, except + * for netfn, which needs to be the response that was + * returned, not the request value. + */ + recv_msg->msg.netfn = msg->rsp[6] >> 2; + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = msg->rsp_size - 12; + recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + ipmi_inc_stat(intf, handled_lan_responses); + deliver_response(recv_msg); + + return 0; +} + +static int handle_lan_get_msg_cmd(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct cmd_rcvr *rcvr; + int rv = 0; + unsigned char netfn; + unsigned char cmd; + unsigned char chan; + ipmi_user_t user = NULL; + struct ipmi_lan_addr *lan_addr; + struct ipmi_recv_msg *recv_msg; + + if (msg->rsp_size < 12) { + /* Message not big enough, just ignore it. */ + ipmi_inc_stat(intf, invalid_commands); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + netfn = msg->rsp[6] >> 2; + cmd = msg->rsp[10]; + chan = msg->rsp[3] & 0xf; + + rcu_read_lock(); + rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); + if (rcvr) { + user = rcvr->user; + kref_get(&user->refcount); + } else + user = NULL; + rcu_read_unlock(); + + if (user == NULL) { + /* We didn't find a user, just give up. */ + ipmi_inc_stat(intf, unhandled_commands); + + /* + * Don't do anything with these messages, just allow + * them to be freed. + */ + rv = 0; + } else { + /* Deliver the message to the user. */ + ipmi_inc_stat(intf, handled_commands); + + recv_msg = ipmi_alloc_recv_msg(); + if (!recv_msg) { + /* + * We couldn't allocate memory for the + * message, so requeue it for handling later. + */ + rv = 1; + kref_put(&user->refcount, free_user); + } else { + /* Extract the source address from the data. */ + lan_addr = (struct ipmi_lan_addr *) &recv_msg->addr; + lan_addr->addr_type = IPMI_LAN_ADDR_TYPE; + lan_addr->session_handle = msg->rsp[4]; + lan_addr->remote_SWID = msg->rsp[8]; + lan_addr->local_SWID = msg->rsp[5]; + lan_addr->lun = msg->rsp[9] & 3; + lan_addr->channel = msg->rsp[3] & 0xf; + lan_addr->privilege = msg->rsp[3] >> 4; + + /* + * Extract the rest of the message information + * from the IPMB header. + */ + recv_msg->user = user; + recv_msg->recv_type = IPMI_CMD_RECV_TYPE; + recv_msg->msgid = msg->rsp[9] >> 2; + recv_msg->msg.netfn = msg->rsp[6] >> 2; + recv_msg->msg.cmd = msg->rsp[10]; + recv_msg->msg.data = recv_msg->msg_data; + + /* + * We chop off 12, not 11 bytes because the checksum + * at the end also needs to be removed. + */ + recv_msg->msg.data_len = msg->rsp_size - 12; + memcpy(recv_msg->msg_data, + &(msg->rsp[11]), + msg->rsp_size - 12); + deliver_response(recv_msg); + } + } + + return rv; +} + +/* + * This routine will handle "Get Message" command responses with + * channels that use an OEM Medium. The message format belongs to + * the OEM. See IPMI 2.0 specification, Chapter 6 and + * Chapter 22, sections 22.6 and 22.24 for more details. + */ +static int handle_oem_get_msg_cmd(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct cmd_rcvr *rcvr; + int rv = 0; + unsigned char netfn; + unsigned char cmd; + unsigned char chan; + ipmi_user_t user = NULL; + struct ipmi_system_interface_addr *smi_addr; + struct ipmi_recv_msg *recv_msg; + + /* + * We expect the OEM SW to perform error checking + * so we just do some basic sanity checks + */ + if (msg->rsp_size < 4) { + /* Message not big enough, just ignore it. */ + ipmi_inc_stat(intf, invalid_commands); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + /* + * This is an OEM Message so the OEM needs to know how + * handle the message. We do no interpretation. + */ + netfn = msg->rsp[0] >> 2; + cmd = msg->rsp[1]; + chan = msg->rsp[3] & 0xf; + + rcu_read_lock(); + rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); + if (rcvr) { + user = rcvr->user; + kref_get(&user->refcount); + } else + user = NULL; + rcu_read_unlock(); + + if (user == NULL) { + /* We didn't find a user, just give up. */ + ipmi_inc_stat(intf, unhandled_commands); + + /* + * Don't do anything with these messages, just allow + * them to be freed. + */ + + rv = 0; + } else { + /* Deliver the message to the user. */ + ipmi_inc_stat(intf, handled_commands); + + recv_msg = ipmi_alloc_recv_msg(); + if (!recv_msg) { + /* + * We couldn't allocate memory for the + * message, so requeue it for handling + * later. + */ + rv = 1; + kref_put(&user->refcount, free_user); + } else { + /* + * OEM Messages are expected to be delivered via + * the system interface to SMS software. We might + * need to visit this again depending on OEM + * requirements + */ + smi_addr = ((struct ipmi_system_interface_addr *) + &(recv_msg->addr)); + smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr->channel = IPMI_BMC_CHANNEL; + smi_addr->lun = msg->rsp[0] & 3; + + recv_msg->user = user; + recv_msg->user_msg_data = NULL; + recv_msg->recv_type = IPMI_OEM_RECV_TYPE; + recv_msg->msg.netfn = msg->rsp[0] >> 2; + recv_msg->msg.cmd = msg->rsp[1]; + recv_msg->msg.data = recv_msg->msg_data; + + /* + * The message starts at byte 4 which follows the + * the Channel Byte in the "GET MESSAGE" command + */ + recv_msg->msg.data_len = msg->rsp_size - 4; + memcpy(recv_msg->msg_data, + &(msg->rsp[4]), + msg->rsp_size - 4); + deliver_response(recv_msg); + } + } + + return rv; +} + +static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg, + struct ipmi_smi_msg *msg) +{ + struct ipmi_system_interface_addr *smi_addr; + + recv_msg->msgid = 0; + smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr); + smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr->channel = IPMI_BMC_CHANNEL; + smi_addr->lun = msg->rsp[0] & 3; + recv_msg->recv_type = IPMI_ASYNC_EVENT_RECV_TYPE; + recv_msg->msg.netfn = msg->rsp[0] >> 2; + recv_msg->msg.cmd = msg->rsp[1]; + memcpy(recv_msg->msg_data, &(msg->rsp[3]), msg->rsp_size - 3); + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = msg->rsp_size - 3; +} + +static int handle_read_event_rsp(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct ipmi_recv_msg *recv_msg, *recv_msg2; + struct list_head msgs; + ipmi_user_t user; + int rv = 0; + int deliver_count = 0; + unsigned long flags; + + if (msg->rsp_size < 19) { + /* Message is too small to be an IPMB event. */ + ipmi_inc_stat(intf, invalid_events); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the event, just ignore it. */ + return 0; + } + + INIT_LIST_HEAD(&msgs); + + spin_lock_irqsave(&intf->events_lock, flags); + + ipmi_inc_stat(intf, events); + + /* + * Allocate and fill in one message for every user that is + * getting events. + */ + rcu_read_lock(); + list_for_each_entry_rcu(user, &intf->users, link) { + if (!user->gets_events) + continue; + + recv_msg = ipmi_alloc_recv_msg(); + if (!recv_msg) { + rcu_read_unlock(); + list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, + link) { + list_del(&recv_msg->link); + ipmi_free_recv_msg(recv_msg); + } + /* + * We couldn't allocate memory for the + * message, so requeue it for handling + * later. + */ + rv = 1; + goto out; + } + + deliver_count++; + + copy_event_into_recv_msg(recv_msg, msg); + recv_msg->user = user; + kref_get(&user->refcount); + list_add_tail(&(recv_msg->link), &msgs); + } + rcu_read_unlock(); + + if (deliver_count) { + /* Now deliver all the messages. */ + list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) { + list_del(&recv_msg->link); + deliver_response(recv_msg); + } + } else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) { + /* + * No one to receive the message, put it in queue if there's + * not already too many things in the queue. + */ + recv_msg = ipmi_alloc_recv_msg(); + if (!recv_msg) { + /* + * We couldn't allocate memory for the + * message, so requeue it for handling + * later. + */ + rv = 1; + goto out; + } + + copy_event_into_recv_msg(recv_msg, msg); + list_add_tail(&(recv_msg->link), &(intf->waiting_events)); + intf->waiting_events_count++; + } else if (!intf->event_msg_printed) { + /* + * There's too many things in the queue, discard this + * message. + */ + printk(KERN_WARNING PFX "Event queue full, discarding" + " incoming events\n"); + intf->event_msg_printed = 1; + } + + out: + spin_unlock_irqrestore(&(intf->events_lock), flags); + + return rv; +} + +static int handle_bmc_rsp(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct ipmi_recv_msg *recv_msg; + struct ipmi_user *user; + + recv_msg = (struct ipmi_recv_msg *) msg->user_data; + if (recv_msg == NULL) { + printk(KERN_WARNING + "IPMI message received with no owner. This\n" + "could be because of a malformed message, or\n" + "because of a hardware error. Contact your\n" + "hardware vender for assistance\n"); + return 0; + } + + user = recv_msg->user; + /* Make sure the user still exists. */ + if (user && !user->valid) { + /* The user for the message went away, so give up. */ + ipmi_inc_stat(intf, unhandled_local_responses); + ipmi_free_recv_msg(recv_msg); + } else { + struct ipmi_system_interface_addr *smi_addr; + + ipmi_inc_stat(intf, handled_local_responses); + recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + recv_msg->msgid = msg->msgid; + smi_addr = ((struct ipmi_system_interface_addr *) + &(recv_msg->addr)); + smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr->channel = IPMI_BMC_CHANNEL; + smi_addr->lun = msg->rsp[0] & 3; + recv_msg->msg.netfn = msg->rsp[0] >> 2; + recv_msg->msg.cmd = msg->rsp[1]; + memcpy(recv_msg->msg_data, + &(msg->rsp[2]), + msg->rsp_size - 2); + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = msg->rsp_size - 2; + deliver_response(recv_msg); + } + + return 0; +} + +/* + * Handle a received message. Return 1 if the message should be requeued, + * 0 if the message should be freed, or -1 if the message should not + * be freed or requeued. + */ +static int handle_one_recv_msg(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + int requeue; + int chan; + +#ifdef DEBUG_MSGING + int m; + printk("Recv:"); + for (m = 0; m < msg->rsp_size; m++) + printk(" %2.2x", msg->rsp[m]); + printk("\n"); +#endif + if (msg->rsp_size < 2) { + /* Message is too small to be correct. */ + printk(KERN_WARNING PFX "BMC returned to small a message" + " for netfn %x cmd %x, got %d bytes\n", + (msg->data[0] >> 2) | 1, msg->data[1], msg->rsp_size); + + /* Generate an error response for the message. */ + msg->rsp[0] = msg->data[0] | (1 << 2); + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = IPMI_ERR_UNSPECIFIED; + msg->rsp_size = 3; + } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1)) + || (msg->rsp[1] != msg->data[1])) { + /* + * The NetFN and Command in the response is not even + * marginally correct. + */ + printk(KERN_WARNING PFX "BMC returned incorrect response," + " expected netfn %x cmd %x, got netfn %x cmd %x\n", + (msg->data[0] >> 2) | 1, msg->data[1], + msg->rsp[0] >> 2, msg->rsp[1]); + + /* Generate an error response for the message. */ + msg->rsp[0] = msg->data[0] | (1 << 2); + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = IPMI_ERR_UNSPECIFIED; + msg->rsp_size = 3; + } + + if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) + && (msg->rsp[1] == IPMI_SEND_MSG_CMD) + && (msg->user_data != NULL)) { + /* + * It's a response to a response we sent. For this we + * deliver a send message response to the user. + */ + struct ipmi_recv_msg *recv_msg = msg->user_data; + + requeue = 0; + if (msg->rsp_size < 2) + /* Message is too small to be correct. */ + goto out; + + chan = msg->data[2] & 0x0f; + if (chan >= IPMI_MAX_CHANNELS) + /* Invalid channel number */ + goto out; + + if (!recv_msg) + goto out; + + /* Make sure the user still exists. */ + if (!recv_msg->user || !recv_msg->user->valid) + goto out; + + recv_msg->recv_type = IPMI_RESPONSE_RESPONSE_TYPE; + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = 1; + recv_msg->msg_data[0] = msg->rsp[2]; + deliver_response(recv_msg); + } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) + && (msg->rsp[1] == IPMI_GET_MSG_CMD)) { + /* It's from the receive queue. */ + chan = msg->rsp[3] & 0xf; + if (chan >= IPMI_MAX_CHANNELS) { + /* Invalid channel number */ + requeue = 0; + goto out; + } + + /* + * We need to make sure the channels have been initialized. + * The channel_handler routine will set the "curr_channel" + * equal to or greater than IPMI_MAX_CHANNELS when all the + * channels for this interface have been initialized. + */ + if (intf->curr_channel < IPMI_MAX_CHANNELS) { + requeue = 0; /* Throw the message away */ + goto out; + } + + switch (intf->channels[chan].medium) { + case IPMI_CHANNEL_MEDIUM_IPMB: + if (msg->rsp[4] & 0x04) { + /* + * It's a response, so find the + * requesting message and send it up. + */ + requeue = handle_ipmb_get_msg_rsp(intf, msg); + } else { + /* + * It's a command to the SMS from some other + * entity. Handle that. + */ + requeue = handle_ipmb_get_msg_cmd(intf, msg); + } + break; + + case IPMI_CHANNEL_MEDIUM_8023LAN: + case IPMI_CHANNEL_MEDIUM_ASYNC: + if (msg->rsp[6] & 0x04) { + /* + * It's a response, so find the + * requesting message and send it up. + */ + requeue = handle_lan_get_msg_rsp(intf, msg); + } else { + /* + * It's a command to the SMS from some other + * entity. Handle that. + */ + requeue = handle_lan_get_msg_cmd(intf, msg); + } + break; + + default: + /* Check for OEM Channels. Clients had better + register for these commands. */ + if ((intf->channels[chan].medium + >= IPMI_CHANNEL_MEDIUM_OEM_MIN) + && (intf->channels[chan].medium + <= IPMI_CHANNEL_MEDIUM_OEM_MAX)) { + requeue = handle_oem_get_msg_cmd(intf, msg); + } else { + /* + * We don't handle the channel type, so just + * free the message. + */ + requeue = 0; + } + } + + } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) + && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) { + /* It's an asynchronous event. */ + requeue = handle_read_event_rsp(intf, msg); + } else { + /* It's a response from the local BMC. */ + requeue = handle_bmc_rsp(intf, msg); + } + + out: + return requeue; +} + +/* + * If there are messages in the queue or pretimeouts, handle them. + */ +static void handle_new_recv_msgs(ipmi_smi_t intf) +{ + struct ipmi_smi_msg *smi_msg; + unsigned long flags = 0; + int rv; + int run_to_completion = intf->run_to_completion; + + /* See if any waiting messages need to be processed. */ + if (!run_to_completion) + spin_lock_irqsave(&intf->waiting_rcv_msgs_lock, flags); + while (!list_empty(&intf->waiting_rcv_msgs)) { + smi_msg = list_entry(intf->waiting_rcv_msgs.next, + struct ipmi_smi_msg, link); + if (!run_to_completion) + spin_unlock_irqrestore(&intf->waiting_rcv_msgs_lock, + flags); + rv = handle_one_recv_msg(intf, smi_msg); + if (!run_to_completion) + spin_lock_irqsave(&intf->waiting_rcv_msgs_lock, flags); + if (rv > 0) { + /* + * To preserve message order, quit if we + * can't handle a message. + */ + break; + } else { + list_del(&smi_msg->link); + if (rv == 0) + /* Message handled */ + ipmi_free_smi_msg(smi_msg); + /* If rv < 0, fatal error, del but don't free. */ + } + } + if (!run_to_completion) + spin_unlock_irqrestore(&intf->waiting_rcv_msgs_lock, flags); + + /* + * If the pretimout count is non-zero, decrement one from it and + * deliver pretimeouts to all the users. + */ + if (atomic_add_unless(&intf->watchdog_pretimeouts_to_deliver, -1, 0)) { + ipmi_user_t user; + + rcu_read_lock(); + list_for_each_entry_rcu(user, &intf->users, link) { + if (user->handler->ipmi_watchdog_pretimeout) + user->handler->ipmi_watchdog_pretimeout( + user->handler_data); + } + rcu_read_unlock(); + } +} + +static void smi_recv_tasklet(unsigned long val) +{ + unsigned long flags = 0; /* keep us warning-free. */ + ipmi_smi_t intf = (ipmi_smi_t) val; + int run_to_completion = intf->run_to_completion; + struct ipmi_smi_msg *newmsg = NULL; + + /* + * Start the next message if available. + * + * Do this here, not in the actual receiver, because we may deadlock + * because the lower layer is allowed to hold locks while calling + * message delivery. + */ + if (!run_to_completion) + spin_lock_irqsave(&intf->xmit_msgs_lock, flags); + if (intf->curr_msg == NULL && !intf->in_shutdown) { + struct list_head *entry = NULL; + + /* Pick the high priority queue first. */ + if (!list_empty(&intf->hp_xmit_msgs)) + entry = intf->hp_xmit_msgs.next; + else if (!list_empty(&intf->xmit_msgs)) + entry = intf->xmit_msgs.next; + + if (entry) { + list_del(entry); + newmsg = list_entry(entry, struct ipmi_smi_msg, link); + intf->curr_msg = newmsg; + } + } + if (!run_to_completion) + spin_unlock_irqrestore(&intf->xmit_msgs_lock, flags); + if (newmsg) + intf->handlers->sender(intf->send_info, newmsg); + + handle_new_recv_msgs(intf); +} + +/* Handle a new message from the lower layer. */ +void ipmi_smi_msg_received(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + unsigned long flags = 0; /* keep us warning-free. */ + int run_to_completion = intf->run_to_completion; + + if ((msg->data_size >= 2) + && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2)) + && (msg->data[1] == IPMI_SEND_MSG_CMD) + && (msg->user_data == NULL)) { + + if (intf->in_shutdown) + goto free_msg; + + /* + * This is the local response to a command send, start + * the timer for these. The user_data will not be + * NULL if this is a response send, and we will let + * response sends just go through. + */ + + /* + * Check for errors, if we get certain errors (ones + * that mean basically we can try again later), we + * ignore them and start the timer. Otherwise we + * report the error immediately. + */ + if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) + && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) + && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR) + && (msg->rsp[2] != IPMI_BUS_ERR) + && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) { + int chan = msg->rsp[3] & 0xf; + + /* Got an error sending the message, handle it. */ + if (chan >= IPMI_MAX_CHANNELS) + ; /* This shouldn't happen */ + else if ((intf->channels[chan].medium + == IPMI_CHANNEL_MEDIUM_8023LAN) + || (intf->channels[chan].medium + == IPMI_CHANNEL_MEDIUM_ASYNC)) + ipmi_inc_stat(intf, sent_lan_command_errs); + else + ipmi_inc_stat(intf, sent_ipmb_command_errs); + intf_err_seq(intf, msg->msgid, msg->rsp[2]); + } else + /* The message was sent, start the timer. */ + intf_start_seq_timer(intf, msg->msgid); + +free_msg: + ipmi_free_smi_msg(msg); + } else { + /* + * To preserve message order, we keep a queue and deliver from + * a tasklet. + */ + if (!run_to_completion) + spin_lock_irqsave(&intf->waiting_rcv_msgs_lock, flags); + list_add_tail(&msg->link, &intf->waiting_rcv_msgs); + if (!run_to_completion) + spin_unlock_irqrestore(&intf->waiting_rcv_msgs_lock, + flags); + } + + if (!run_to_completion) + spin_lock_irqsave(&intf->xmit_msgs_lock, flags); + if (msg == intf->curr_msg) + intf->curr_msg = NULL; + if (!run_to_completion) + spin_unlock_irqrestore(&intf->xmit_msgs_lock, flags); + + if (run_to_completion) + smi_recv_tasklet((unsigned long) intf); + else + tasklet_schedule(&intf->recv_tasklet); +} +EXPORT_SYMBOL(ipmi_smi_msg_received); + +void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf) +{ + if (intf->in_shutdown) + return; + + atomic_set(&intf->watchdog_pretimeouts_to_deliver, 1); + tasklet_schedule(&intf->recv_tasklet); +} +EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout); + +static struct ipmi_smi_msg * +smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, + unsigned char seq, long seqid) +{ + struct ipmi_smi_msg *smi_msg = ipmi_alloc_smi_msg(); + if (!smi_msg) + /* + * If we can't allocate the message, then just return, we + * get 4 retries, so this should be ok. + */ + return NULL; + + memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len); + smi_msg->data_size = recv_msg->msg.data_len; + smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid); + +#ifdef DEBUG_MSGING + { + int m; + printk("Resend: "); + for (m = 0; m < smi_msg->data_size; m++) + printk(" %2.2x", smi_msg->data[m]); + printk("\n"); + } +#endif + return smi_msg; +} + +static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, + struct list_head *timeouts, long timeout_period, + int slot, unsigned long *flags, + unsigned int *waiting_msgs) +{ + struct ipmi_recv_msg *msg; + struct ipmi_smi_handlers *handlers; + + if (intf->in_shutdown) + return; + + if (!ent->inuse) + return; + + ent->timeout -= timeout_period; + if (ent->timeout > 0) { + (*waiting_msgs)++; + return; + } + + if (ent->retries_left == 0) { + /* The message has used all its retries. */ + ent->inuse = 0; + msg = ent->recv_msg; + list_add_tail(&msg->link, timeouts); + if (ent->broadcast) + ipmi_inc_stat(intf, timed_out_ipmb_broadcasts); + else if (is_lan_addr(&ent->recv_msg->addr)) + ipmi_inc_stat(intf, timed_out_lan_commands); + else + ipmi_inc_stat(intf, timed_out_ipmb_commands); + } else { + struct ipmi_smi_msg *smi_msg; + /* More retries, send again. */ + + (*waiting_msgs)++; + + /* + * Start with the max timer, set to normal timer after + * the message is sent. + */ + ent->timeout = MAX_MSG_TIMEOUT; + ent->retries_left--; + smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot, + ent->seqid); + if (!smi_msg) { + if (is_lan_addr(&ent->recv_msg->addr)) + ipmi_inc_stat(intf, + dropped_rexmit_lan_commands); + else + ipmi_inc_stat(intf, + dropped_rexmit_ipmb_commands); + return; + } + + spin_unlock_irqrestore(&intf->seq_lock, *flags); + + /* + * Send the new message. We send with a zero + * priority. It timed out, I doubt time is that + * critical now, and high priority messages are really + * only for messages to the local MC, which don't get + * resent. + */ + handlers = intf->handlers; + if (handlers) { + if (is_lan_addr(&ent->recv_msg->addr)) + ipmi_inc_stat(intf, + retransmitted_lan_commands); + else + ipmi_inc_stat(intf, + retransmitted_ipmb_commands); + + smi_send(intf, intf->handlers, smi_msg, 0); + } else + ipmi_free_smi_msg(smi_msg); + + spin_lock_irqsave(&intf->seq_lock, *flags); + } +} + +static unsigned int ipmi_timeout_handler(ipmi_smi_t intf, long timeout_period) +{ + struct list_head timeouts; + struct ipmi_recv_msg *msg, *msg2; + unsigned long flags; + int i; + unsigned int waiting_msgs = 0; + + /* + * Go through the seq table and find any messages that + * have timed out, putting them in the timeouts + * list. + */ + INIT_LIST_HEAD(&timeouts); + spin_lock_irqsave(&intf->seq_lock, flags); + for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) + check_msg_timeout(intf, &(intf->seq_table[i]), + &timeouts, timeout_period, i, + &flags, &waiting_msgs); + spin_unlock_irqrestore(&intf->seq_lock, flags); + + list_for_each_entry_safe(msg, msg2, &timeouts, link) + deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE); + + /* + * Maintenance mode handling. Check the timeout + * optimistically before we claim the lock. It may + * mean a timeout gets missed occasionally, but that + * only means the timeout gets extended by one period + * in that case. No big deal, and it avoids the lock + * most of the time. + */ + if (intf->auto_maintenance_timeout > 0) { + spin_lock_irqsave(&intf->maintenance_mode_lock, flags); + if (intf->auto_maintenance_timeout > 0) { + intf->auto_maintenance_timeout + -= timeout_period; + if (!intf->maintenance_mode + && (intf->auto_maintenance_timeout <= 0)) { + intf->maintenance_mode_enable = false; + maintenance_mode_update(intf); + } + } + spin_unlock_irqrestore(&intf->maintenance_mode_lock, + flags); + } + + tasklet_schedule(&intf->recv_tasklet); + + return waiting_msgs; +} + +static void ipmi_request_event(ipmi_smi_t intf) +{ + /* No event requests when in maintenance mode. */ + if (intf->maintenance_mode_enable) + return; + + if (!intf->in_shutdown) + intf->handlers->request_events(intf->send_info); +} + +static struct timer_list ipmi_timer; + +static atomic_t stop_operation; + +static void ipmi_timeout(unsigned long data) +{ + ipmi_smi_t intf; + int nt = 0; + + if (atomic_read(&stop_operation)) + return; + + rcu_read_lock(); + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + int lnt = 0; + + if (atomic_read(&intf->event_waiters)) { + intf->ticks_to_req_ev--; + if (intf->ticks_to_req_ev == 0) { + ipmi_request_event(intf); + intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME; + } + lnt++; + } + + lnt += ipmi_timeout_handler(intf, IPMI_TIMEOUT_TIME); + + lnt = !!lnt; + if (lnt != intf->last_needs_timer && + intf->handlers->set_need_watch) + intf->handlers->set_need_watch(intf->send_info, lnt); + intf->last_needs_timer = lnt; + + nt += lnt; + } + rcu_read_unlock(); + + if (nt) + mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); +} + +static void need_waiter(ipmi_smi_t intf) +{ + /* Racy, but worst case we start the timer twice. */ + if (!timer_pending(&ipmi_timer)) + mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); +} + +static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0); +static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0); + +static void free_smi_msg(struct ipmi_smi_msg *msg) +{ + atomic_dec(&smi_msg_inuse_count); + kfree(msg); +} + +struct ipmi_smi_msg *ipmi_alloc_smi_msg(void) +{ + struct ipmi_smi_msg *rv; + rv = kmalloc(sizeof(struct ipmi_smi_msg), GFP_ATOMIC); + if (rv) { + rv->done = free_smi_msg; + rv->user_data = NULL; + atomic_inc(&smi_msg_inuse_count); + } + return rv; +} +EXPORT_SYMBOL(ipmi_alloc_smi_msg); + +static void free_recv_msg(struct ipmi_recv_msg *msg) +{ + atomic_dec(&recv_msg_inuse_count); + kfree(msg); +} + +static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void) +{ + struct ipmi_recv_msg *rv; + + rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC); + if (rv) { + rv->user = NULL; + rv->done = free_recv_msg; + atomic_inc(&recv_msg_inuse_count); + } + return rv; +} + +void ipmi_free_recv_msg(struct ipmi_recv_msg *msg) +{ + if (msg->user) + kref_put(&msg->user->refcount, free_user); + msg->done(msg); +} +EXPORT_SYMBOL(ipmi_free_recv_msg); + +#ifdef CONFIG_IPMI_PANIC_EVENT + +static atomic_t panic_done_count = ATOMIC_INIT(0); + +static void dummy_smi_done_handler(struct ipmi_smi_msg *msg) +{ + atomic_dec(&panic_done_count); +} + +static void dummy_recv_done_handler(struct ipmi_recv_msg *msg) +{ + atomic_dec(&panic_done_count); +} + +/* + * Inside a panic, send a message and wait for a response. + */ +static void ipmi_panic_request_and_wait(ipmi_smi_t intf, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *msg) +{ + struct ipmi_smi_msg smi_msg; + struct ipmi_recv_msg recv_msg; + int rv; + + smi_msg.done = dummy_smi_done_handler; + recv_msg.done = dummy_recv_done_handler; + atomic_add(2, &panic_done_count); + rv = i_ipmi_request(NULL, + intf, + addr, + 0, + msg, + intf, + &smi_msg, + &recv_msg, + 0, + intf->channels[0].address, + intf->channels[0].lun, + 0, 1); /* Don't retry, and don't wait. */ + if (rv) + atomic_sub(2, &panic_done_count); + while (atomic_read(&panic_done_count) != 0) + ipmi_poll(intf); +} + +#ifdef CONFIG_IPMI_PANIC_STRING +static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) +{ + if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) + && (msg->msg.netfn == IPMI_NETFN_SENSOR_EVENT_RESPONSE) + && (msg->msg.cmd == IPMI_GET_EVENT_RECEIVER_CMD) + && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) { + /* A get event receiver command, save it. */ + intf->event_receiver = msg->msg.data[1]; + intf->event_receiver_lun = msg->msg.data[2] & 0x3; + } +} + +static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) +{ + if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) + && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) + && (msg->msg.cmd == IPMI_GET_DEVICE_ID_CMD) + && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) { + /* + * A get device id command, save if we are an event + * receiver or generator. + */ + intf->local_sel_device = (msg->msg.data[6] >> 2) & 1; + intf->local_event_generator = (msg->msg.data[6] >> 5) & 1; + } +} +#endif + +static void send_panic_events(char *str) +{ + struct kernel_ipmi_msg msg; + ipmi_smi_t intf; + unsigned char data[16]; + struct ipmi_system_interface_addr *si; + struct ipmi_addr addr; + + si = (struct ipmi_system_interface_addr *) &addr; + si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + si->channel = IPMI_BMC_CHANNEL; + si->lun = 0; + + /* Fill in an event telling that we have failed. */ + msg.netfn = 0x04; /* Sensor or Event. */ + msg.cmd = 2; /* Platform event command. */ + msg.data = data; + msg.data_len = 8; + data[0] = 0x41; /* Kernel generator ID, IPMI table 5-4 */ + data[1] = 0x03; /* This is for IPMI 1.0. */ + data[2] = 0x20; /* OS Critical Stop, IPMI table 36-3 */ + data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */ + data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */ + + /* + * Put a few breadcrumbs in. Hopefully later we can add more things + * to make the panic events more useful. + */ + if (str) { + data[3] = str[0]; + data[6] = str[1]; + data[7] = str[2]; + } + + /* For every registered interface, send the event. */ + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + if (!intf->handlers) + /* Interface is not ready. */ + continue; + + intf->run_to_completion = 1; + /* Send the event announcing the panic. */ + intf->handlers->set_run_to_completion(intf->send_info, 1); + ipmi_panic_request_and_wait(intf, &addr, &msg); + } + +#ifdef CONFIG_IPMI_PANIC_STRING + /* + * On every interface, dump a bunch of OEM event holding the + * string. + */ + if (!str) + return; + + /* For every registered interface, send the event. */ + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + char *p = str; + struct ipmi_ipmb_addr *ipmb; + int j; + + if (intf->intf_num == -1) + /* Interface was not ready yet. */ + continue; + + /* + * intf_num is used as an marker to tell if the + * interface is valid. Thus we need a read barrier to + * make sure data fetched before checking intf_num + * won't be used. + */ + smp_rmb(); + + /* + * First job here is to figure out where to send the + * OEM events. There's no way in IPMI to send OEM + * events using an event send command, so we have to + * find the SEL to put them in and stick them in + * there. + */ + + /* Get capabilities from the get device id. */ + intf->local_sel_device = 0; + intf->local_event_generator = 0; + intf->event_receiver = 0; + + /* Request the device info from the local MC. */ + msg.netfn = IPMI_NETFN_APP_REQUEST; + msg.cmd = IPMI_GET_DEVICE_ID_CMD; + msg.data = NULL; + msg.data_len = 0; + intf->null_user_handler = device_id_fetcher; + ipmi_panic_request_and_wait(intf, &addr, &msg); + + if (intf->local_event_generator) { + /* Request the event receiver from the local MC. */ + msg.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST; + msg.cmd = IPMI_GET_EVENT_RECEIVER_CMD; + msg.data = NULL; + msg.data_len = 0; + intf->null_user_handler = event_receiver_fetcher; + ipmi_panic_request_and_wait(intf, &addr, &msg); + } + intf->null_user_handler = NULL; + + /* + * Validate the event receiver. The low bit must not + * be 1 (it must be a valid IPMB address), it cannot + * be zero, and it must not be my address. + */ + if (((intf->event_receiver & 1) == 0) + && (intf->event_receiver != 0) + && (intf->event_receiver != intf->channels[0].address)) { + /* + * The event receiver is valid, send an IPMB + * message. + */ + ipmb = (struct ipmi_ipmb_addr *) &addr; + ipmb->addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb->channel = 0; /* FIXME - is this right? */ + ipmb->lun = intf->event_receiver_lun; + ipmb->slave_addr = intf->event_receiver; + } else if (intf->local_sel_device) { + /* + * The event receiver was not valid (or was + * me), but I am an SEL device, just dump it + * in my SEL. + */ + si = (struct ipmi_system_interface_addr *) &addr; + si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + si->channel = IPMI_BMC_CHANNEL; + si->lun = 0; + } else + continue; /* No where to send the event. */ + + msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */ + msg.cmd = IPMI_ADD_SEL_ENTRY_CMD; + msg.data = data; + msg.data_len = 16; + + j = 0; + while (*p) { + int size = strlen(p); + + if (size > 11) + size = 11; + data[0] = 0; + data[1] = 0; + data[2] = 0xf0; /* OEM event without timestamp. */ + data[3] = intf->channels[0].address; + data[4] = j++; /* sequence # */ + /* + * Always give 11 bytes, so strncpy will fill + * it with zeroes for me. + */ + strncpy(data+5, p, 11); + p += size; + + ipmi_panic_request_and_wait(intf, &addr, &msg); + } + } +#endif /* CONFIG_IPMI_PANIC_STRING */ +} +#endif /* CONFIG_IPMI_PANIC_EVENT */ + +static int has_panicked; + +static int panic_event(struct notifier_block *this, + unsigned long event, + void *ptr) +{ + ipmi_smi_t intf; + + if (has_panicked) + return NOTIFY_DONE; + has_panicked = 1; + + /* For every registered interface, set it to run to completion. */ + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + if (!intf->handlers) + /* Interface is not ready. */ + continue; + + intf->run_to_completion = 1; + intf->handlers->set_run_to_completion(intf->send_info, 1); + } + +#ifdef CONFIG_IPMI_PANIC_EVENT + send_panic_events(ptr); +#endif + + return NOTIFY_DONE; +} + +static struct notifier_block panic_block = { + .notifier_call = panic_event, + .next = NULL, + .priority = 200 /* priority: INT_MAX >= x >= 0 */ +}; + +static int ipmi_init_msghandler(void) +{ + int rv; + + if (initialized) + return 0; + + rv = driver_register(&ipmidriver.driver); + if (rv) { + printk(KERN_ERR PFX "Could not register IPMI driver\n"); + return rv; + } + + printk(KERN_INFO "ipmi message handler version " + IPMI_DRIVER_VERSION "\n"); + +#ifdef CONFIG_PROC_FS + proc_ipmi_root = proc_mkdir("ipmi", NULL); + if (!proc_ipmi_root) { + printk(KERN_ERR PFX "Unable to create IPMI proc dir"); + driver_unregister(&ipmidriver.driver); + return -ENOMEM; + } + +#endif /* CONFIG_PROC_FS */ + + setup_timer(&ipmi_timer, ipmi_timeout, 0); + mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); + + atomic_notifier_chain_register(&panic_notifier_list, &panic_block); + + initialized = 1; + + return 0; +} + +static int __init ipmi_init_msghandler_mod(void) +{ + ipmi_init_msghandler(); + return 0; +} + +static void __exit cleanup_ipmi(void) +{ + int count; + + if (!initialized) + return; + + atomic_notifier_chain_unregister(&panic_notifier_list, &panic_block); + + /* + * This can't be called if any interfaces exist, so no worry + * about shutting down the interfaces. + */ + + /* + * Tell the timer to stop, then wait for it to stop. This + * avoids problems with race conditions removing the timer + * here. + */ + atomic_inc(&stop_operation); + del_timer_sync(&ipmi_timer); + +#ifdef CONFIG_PROC_FS + proc_remove(proc_ipmi_root); +#endif /* CONFIG_PROC_FS */ + + driver_unregister(&ipmidriver.driver); + + initialized = 0; + + /* Check for buffer leaks. */ + count = atomic_read(&smi_msg_inuse_count); + if (count != 0) + printk(KERN_WARNING PFX "SMI message count %d at exit\n", + count); + count = atomic_read(&recv_msg_inuse_count); + if (count != 0) + printk(KERN_WARNING PFX "recv message count %d at exit\n", + count); +} +module_exit(cleanup_ipmi); + +module_init(ipmi_init_msghandler_mod); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); +MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI" + " interface."); +MODULE_VERSION(IPMI_DRIVER_VERSION); diff --git a/kernel/drivers/char/ipmi/ipmi_powernv.c b/kernel/drivers/char/ipmi/ipmi_powernv.c new file mode 100644 index 000000000..8753b0f6a --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_powernv.c @@ -0,0 +1,311 @@ +/* + * PowerNV OPAL IPMI driver + * + * Copyright 2014 IBM Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#define pr_fmt(fmt) "ipmi-powernv: " fmt + +#include <linux/ipmi_smi.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of.h> + +#include <asm/opal.h> + + +struct ipmi_smi_powernv { + u64 interface_id; + struct ipmi_device_id ipmi_id; + ipmi_smi_t intf; + u64 event; + struct notifier_block event_nb; + + /** + * We assume that there can only be one outstanding request, so + * keep the pending message in cur_msg. We protect this from concurrent + * updates through send & recv calls, (and consequently opal_msg, which + * is in-use when cur_msg is set) with msg_lock + */ + spinlock_t msg_lock; + struct ipmi_smi_msg *cur_msg; + struct opal_ipmi_msg *opal_msg; +}; + +static int ipmi_powernv_start_processing(void *send_info, ipmi_smi_t intf) +{ + struct ipmi_smi_powernv *smi = send_info; + + smi->intf = intf; + return 0; +} + +static void send_error_reply(struct ipmi_smi_powernv *smi, + struct ipmi_smi_msg *msg, u8 completion_code) +{ + msg->rsp[0] = msg->data[0] | 0x4; + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = completion_code; + msg->rsp_size = 3; + ipmi_smi_msg_received(smi->intf, msg); +} + +static void ipmi_powernv_send(void *send_info, struct ipmi_smi_msg *msg) +{ + struct ipmi_smi_powernv *smi = send_info; + struct opal_ipmi_msg *opal_msg; + unsigned long flags; + int comp, rc; + size_t size; + + /* ensure data_len will fit in the opal_ipmi_msg buffer... */ + if (msg->data_size > IPMI_MAX_MSG_LENGTH) { + comp = IPMI_REQ_LEN_EXCEEDED_ERR; + goto err; + } + + /* ... and that we at least have netfn and cmd bytes */ + if (msg->data_size < 2) { + comp = IPMI_REQ_LEN_INVALID_ERR; + goto err; + } + + spin_lock_irqsave(&smi->msg_lock, flags); + + if (smi->cur_msg) { + comp = IPMI_NODE_BUSY_ERR; + goto err_unlock; + } + + /* format our data for the OPAL API */ + opal_msg = smi->opal_msg; + opal_msg->version = OPAL_IPMI_MSG_FORMAT_VERSION_1; + opal_msg->netfn = msg->data[0]; + opal_msg->cmd = msg->data[1]; + if (msg->data_size > 2) + memcpy(opal_msg->data, msg->data + 2, msg->data_size - 2); + + /* data_size already includes the netfn and cmd bytes */ + size = sizeof(*opal_msg) + msg->data_size - 2; + + pr_devel("%s: opal_ipmi_send(0x%llx, %p, %ld)\n", __func__, + smi->interface_id, opal_msg, size); + rc = opal_ipmi_send(smi->interface_id, opal_msg, size); + pr_devel("%s: -> %d\n", __func__, rc); + + if (!rc) { + smi->cur_msg = msg; + spin_unlock_irqrestore(&smi->msg_lock, flags); + return; + } + + comp = IPMI_ERR_UNSPECIFIED; +err_unlock: + spin_unlock_irqrestore(&smi->msg_lock, flags); +err: + send_error_reply(smi, msg, comp); +} + +static int ipmi_powernv_recv(struct ipmi_smi_powernv *smi) +{ + struct opal_ipmi_msg *opal_msg; + struct ipmi_smi_msg *msg; + unsigned long flags; + uint64_t size; + int rc; + + pr_devel("%s: opal_ipmi_recv(%llx, msg, sz)\n", __func__, + smi->interface_id); + + spin_lock_irqsave(&smi->msg_lock, flags); + + if (!smi->cur_msg) { + spin_unlock_irqrestore(&smi->msg_lock, flags); + pr_warn("no current message?\n"); + return 0; + } + + msg = smi->cur_msg; + opal_msg = smi->opal_msg; + + size = cpu_to_be64(sizeof(*opal_msg) + IPMI_MAX_MSG_LENGTH); + + rc = opal_ipmi_recv(smi->interface_id, + opal_msg, + &size); + size = be64_to_cpu(size); + pr_devel("%s: -> %d (size %lld)\n", __func__, + rc, rc == 0 ? size : 0); + if (rc) { + spin_unlock_irqrestore(&smi->msg_lock, flags); + ipmi_free_smi_msg(msg); + return 0; + } + + if (size < sizeof(*opal_msg)) { + spin_unlock_irqrestore(&smi->msg_lock, flags); + pr_warn("unexpected IPMI message size %lld\n", size); + return 0; + } + + if (opal_msg->version != OPAL_IPMI_MSG_FORMAT_VERSION_1) { + spin_unlock_irqrestore(&smi->msg_lock, flags); + pr_warn("unexpected IPMI message format (version %d)\n", + opal_msg->version); + return 0; + } + + msg->rsp[0] = opal_msg->netfn; + msg->rsp[1] = opal_msg->cmd; + if (size > sizeof(*opal_msg)) + memcpy(&msg->rsp[2], opal_msg->data, size - sizeof(*opal_msg)); + msg->rsp_size = 2 + size - sizeof(*opal_msg); + + smi->cur_msg = NULL; + spin_unlock_irqrestore(&smi->msg_lock, flags); + ipmi_smi_msg_received(smi->intf, msg); + return 0; +} + +static void ipmi_powernv_request_events(void *send_info) +{ +} + +static void ipmi_powernv_set_run_to_completion(void *send_info, + bool run_to_completion) +{ +} + +static void ipmi_powernv_poll(void *send_info) +{ + struct ipmi_smi_powernv *smi = send_info; + + ipmi_powernv_recv(smi); +} + +static struct ipmi_smi_handlers ipmi_powernv_smi_handlers = { + .owner = THIS_MODULE, + .start_processing = ipmi_powernv_start_processing, + .sender = ipmi_powernv_send, + .request_events = ipmi_powernv_request_events, + .set_run_to_completion = ipmi_powernv_set_run_to_completion, + .poll = ipmi_powernv_poll, +}; + +static int ipmi_opal_event(struct notifier_block *nb, + unsigned long events, void *change) +{ + struct ipmi_smi_powernv *smi = container_of(nb, + struct ipmi_smi_powernv, event_nb); + + if (events & smi->event) + ipmi_powernv_recv(smi); + return 0; +} + +static int ipmi_powernv_probe(struct platform_device *pdev) +{ + struct ipmi_smi_powernv *ipmi; + struct device *dev; + u32 prop; + int rc; + + if (!pdev || !pdev->dev.of_node) + return -ENODEV; + + dev = &pdev->dev; + + ipmi = devm_kzalloc(dev, sizeof(*ipmi), GFP_KERNEL); + if (!ipmi) + return -ENOMEM; + + spin_lock_init(&ipmi->msg_lock); + + rc = of_property_read_u32(dev->of_node, "ibm,ipmi-interface-id", + &prop); + if (rc) { + dev_warn(dev, "No interface ID property\n"); + goto err_free; + } + ipmi->interface_id = prop; + + rc = of_property_read_u32(dev->of_node, "interrupts", &prop); + if (rc) { + dev_warn(dev, "No interrupts property\n"); + goto err_free; + } + + ipmi->event = 1ull << prop; + ipmi->event_nb.notifier_call = ipmi_opal_event; + + rc = opal_notifier_register(&ipmi->event_nb); + if (rc) { + dev_warn(dev, "OPAL notifier registration failed (%d)\n", rc); + goto err_free; + } + + ipmi->opal_msg = devm_kmalloc(dev, + sizeof(*ipmi->opal_msg) + IPMI_MAX_MSG_LENGTH, + GFP_KERNEL); + if (!ipmi->opal_msg) { + rc = -ENOMEM; + goto err_unregister; + } + + /* todo: query actual ipmi_device_id */ + rc = ipmi_register_smi(&ipmi_powernv_smi_handlers, ipmi, + &ipmi->ipmi_id, dev, 0); + if (rc) { + dev_warn(dev, "IPMI SMI registration failed (%d)\n", rc); + goto err_free_msg; + } + + dev_set_drvdata(dev, ipmi); + return 0; + +err_free_msg: + devm_kfree(dev, ipmi->opal_msg); +err_unregister: + opal_notifier_unregister(&ipmi->event_nb); +err_free: + devm_kfree(dev, ipmi); + return rc; +} + +static int ipmi_powernv_remove(struct platform_device *pdev) +{ + struct ipmi_smi_powernv *smi = dev_get_drvdata(&pdev->dev); + + ipmi_unregister_smi(smi->intf); + opal_notifier_unregister(&smi->event_nb); + return 0; +} + +static const struct of_device_id ipmi_powernv_match[] = { + { .compatible = "ibm,opal-ipmi" }, + { }, +}; + + +static struct platform_driver powernv_ipmi_driver = { + .driver = { + .name = "ipmi-powernv", + .owner = THIS_MODULE, + .of_match_table = ipmi_powernv_match, + }, + .probe = ipmi_powernv_probe, + .remove = ipmi_powernv_remove, +}; + + +module_platform_driver(powernv_ipmi_driver); + +MODULE_DEVICE_TABLE(of, ipmi_powernv_match); +MODULE_DESCRIPTION("powernv IPMI driver"); +MODULE_AUTHOR("Jeremy Kerr <jk@ozlabs.org>"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/char/ipmi/ipmi_poweroff.c b/kernel/drivers/char/ipmi/ipmi_poweroff.c new file mode 100644 index 000000000..9f2e3be2c --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_poweroff.c @@ -0,0 +1,749 @@ +/* + * ipmi_poweroff.c + * + * MontaVista IPMI Poweroff extension to sys_reboot + * + * Author: MontaVista Software, Inc. + * Steven Dake <sdake@mvista.com> + * Corey Minyard <cminyard@mvista.com> + * source@mvista.com + * + * Copyright 2002,2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/proc_fs.h> +#include <linux/string.h> +#include <linux/completion.h> +#include <linux/pm.h> +#include <linux/kdev_t.h> +#include <linux/ipmi.h> +#include <linux/ipmi_smi.h> + +#define PFX "IPMI poweroff: " + +static void ipmi_po_smi_gone(int if_num); +static void ipmi_po_new_smi(int if_num, struct device *device); + +/* Definitions for controlling power off (if the system supports it). It + * conveniently matches the IPMI chassis control values. */ +#define IPMI_CHASSIS_POWER_DOWN 0 /* power down, the default. */ +#define IPMI_CHASSIS_POWER_CYCLE 0x02 /* power cycle */ + +/* the IPMI data command */ +static int poweroff_powercycle; + +/* Which interface to use, -1 means the first we see. */ +static int ifnum_to_use = -1; + +/* Our local state. */ +static int ready; +static ipmi_user_t ipmi_user; +static int ipmi_ifnum; +static void (*specific_poweroff_func)(ipmi_user_t user); + +/* Holds the old poweroff function so we can restore it on removal. */ +static void (*old_poweroff_func)(void); + +static int set_param_ifnum(const char *val, struct kernel_param *kp) +{ + int rv = param_set_int(val, kp); + if (rv) + return rv; + if ((ifnum_to_use < 0) || (ifnum_to_use == ipmi_ifnum)) + return 0; + + ipmi_po_smi_gone(ipmi_ifnum); + ipmi_po_new_smi(ifnum_to_use, NULL); + return 0; +} + +module_param_call(ifnum_to_use, set_param_ifnum, param_get_int, + &ifnum_to_use, 0644); +MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " + "timer. Setting to -1 defaults to the first registered " + "interface"); + +/* parameter definition to allow user to flag power cycle */ +module_param(poweroff_powercycle, int, 0644); +MODULE_PARM_DESC(poweroff_powercycle, + " Set to non-zero to enable power cycle instead of power" + " down. Power cycle is contingent on hardware support," + " otherwise it defaults back to power down."); + +/* Stuff from the get device id command. */ +static unsigned int mfg_id; +static unsigned int prod_id; +static unsigned char capabilities; +static unsigned char ipmi_version; + +/* + * We use our own messages for this operation, we don't let the system + * allocate them, since we may be in a panic situation. The whole + * thing is single-threaded, anyway, so multiple messages are not + * required. + */ +static atomic_t dummy_count = ATOMIC_INIT(0); +static void dummy_smi_free(struct ipmi_smi_msg *msg) +{ + atomic_dec(&dummy_count); +} +static void dummy_recv_free(struct ipmi_recv_msg *msg) +{ + atomic_dec(&dummy_count); +} +static struct ipmi_smi_msg halt_smi_msg = { + .done = dummy_smi_free +}; +static struct ipmi_recv_msg halt_recv_msg = { + .done = dummy_recv_free +}; + + +/* + * Code to send a message and wait for the response. + */ + +static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) +{ + struct completion *comp = recv_msg->user_msg_data; + + if (comp) + complete(comp); +} + +static struct ipmi_user_hndl ipmi_poweroff_handler = { + .ipmi_recv_hndl = receive_handler +}; + + +static int ipmi_request_wait_for_response(ipmi_user_t user, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *send_msg) +{ + int rv; + struct completion comp; + + init_completion(&comp); + + rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &comp, + &halt_smi_msg, &halt_recv_msg, 0); + if (rv) + return rv; + + wait_for_completion(&comp); + + return halt_recv_msg.msg.data[0]; +} + +/* Wait for message to complete, spinning. */ +static int ipmi_request_in_rc_mode(ipmi_user_t user, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *send_msg) +{ + int rv; + + atomic_set(&dummy_count, 2); + rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL, + &halt_smi_msg, &halt_recv_msg, 0); + if (rv) { + atomic_set(&dummy_count, 0); + return rv; + } + + /* + * Spin until our message is done. + */ + while (atomic_read(&dummy_count) > 0) { + ipmi_poll_interface(user); + cpu_relax(); + } + + return halt_recv_msg.msg.data[0]; +} + +/* + * ATCA Support + */ + +#define IPMI_NETFN_ATCA 0x2c +#define IPMI_ATCA_SET_POWER_CMD 0x11 +#define IPMI_ATCA_GET_ADDR_INFO_CMD 0x01 +#define IPMI_PICMG_ID 0 + +#define IPMI_NETFN_OEM 0x2e +#define IPMI_ATCA_PPS_GRACEFUL_RESTART 0x11 +#define IPMI_ATCA_PPS_IANA "\x00\x40\x0A" +#define IPMI_MOTOROLA_MANUFACTURER_ID 0x0000A1 +#define IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID 0x0051 + +static void (*atca_oem_poweroff_hook)(ipmi_user_t user); + +static void pps_poweroff_atca(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "PPS powerdown hook used"); + + send_msg.netfn = IPMI_NETFN_OEM; + send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART; + send_msg.data = IPMI_ATCA_PPS_IANA; + send_msg.data_len = 3; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { + printk(KERN_ERR PFX "Unable to send ATCA ," + " IPMI error 0x%x\n", rv); + } + return; +} + +static int ipmi_atca_detect(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + /* + * Use get address info to check and see if we are ATCA + */ + send_msg.netfn = IPMI_NETFN_ATCA; + send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD; + data[0] = IPMI_PICMG_ID; + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_wait_for_response(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + + printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", + mfg_id, prod_id); + if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID) + && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) { + printk(KERN_INFO PFX + "Installing Pigeon Point Systems Poweroff Hook\n"); + atca_oem_poweroff_hook = pps_poweroff_atca; + } + return !rv; +} + +static void ipmi_poweroff_atca(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[4]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via ATCA power command\n"); + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_ATCA; + send_msg.cmd = IPMI_ATCA_SET_POWER_CMD; + data[0] = IPMI_PICMG_ID; + data[1] = 0; /* FRU id */ + data[2] = 0; /* Power Level */ + data[3] = 0; /* Don't change saved presets */ + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + /* + * At this point, the system may be shutting down, and most + * serial drivers (if used) will have interrupts turned off + * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE + * return code + */ + if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { + printk(KERN_ERR PFX "Unable to send ATCA powerdown message," + " IPMI error 0x%x\n", rv); + goto out; + } + + if (atca_oem_poweroff_hook) + atca_oem_poweroff_hook(user); + out: + return; +} + +/* + * CPI1 Support + */ + +#define IPMI_NETFN_OEM_1 0xf8 +#define OEM_GRP_CMD_SET_RESET_STATE 0x84 +#define OEM_GRP_CMD_SET_POWER_STATE 0x82 +#define IPMI_NETFN_OEM_8 0xf8 +#define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL 0x80 +#define OEM_GRP_CMD_GET_SLOT_GA 0xa3 +#define IPMI_NETFN_SENSOR_EVT 0x10 +#define IPMI_CMD_GET_EVENT_RECEIVER 0x01 + +#define IPMI_CPI1_PRODUCT_ID 0x000157 +#define IPMI_CPI1_MANUFACTURER_ID 0x0108 + +static int ipmi_cpi1_detect(ipmi_user_t user) +{ + return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID) + && (prod_id == IPMI_CPI1_PRODUCT_ID)); +} + +static void ipmi_poweroff_cpi1(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct ipmi_ipmb_addr ipmb_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + int slot; + unsigned char hotswap_ipmb; + unsigned char aer_addr; + unsigned char aer_lun; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via CPI1 power command\n"); + + /* + * Get IPMI ipmb address + */ + send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; + send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + slot = halt_recv_msg.msg.data[1]; + hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot); + + /* + * Get active event receiver + */ + send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2; + send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + aer_addr = halt_recv_msg.msg.data[1]; + aer_lun = halt_recv_msg.msg.data[2]; + + /* + * Setup IPMB address target instead of local target + */ + ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb_addr.channel = 0; + ipmb_addr.slave_addr = aer_addr; + ipmb_addr.lun = aer_lun; + + /* + * Send request hotswap control to remove blade from dpv + */ + send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; + send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL; + send_msg.data = &hotswap_ipmb; + send_msg.data_len = 1; + ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &ipmb_addr, + &send_msg); + + /* + * Set reset asserted + */ + send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; + send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE; + send_msg.data = data; + data[0] = 1; /* Reset asserted state */ + send_msg.data_len = 1; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; + send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE; + send_msg.data = data; + data[0] = 1; /* Power down state */ + send_msg.data_len = 1; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + + out: + return; +} + +/* + * ipmi_dell_chassis_detect() + * Dell systems with IPMI < 1.5 don't set the chassis capability bit + * but they can handle a chassis poweroff or powercycle command. + */ + +#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} +static int ipmi_dell_chassis_detect(ipmi_user_t user) +{ + const char ipmi_version_major = ipmi_version & 0xF; + const char ipmi_version_minor = (ipmi_version >> 4) & 0xF; + const char mfr[3] = DELL_IANA_MFR_ID; + if (!memcmp(mfr, &mfg_id, sizeof(mfr)) && + ipmi_version_major <= 1 && + ipmi_version_minor < 5) + return 1; + return 0; +} + +/* + * Standard chassis support + */ + +#define IPMI_NETFN_CHASSIS_REQUEST 0 +#define IPMI_CHASSIS_CONTROL_CMD 0x02 + +static int ipmi_chassis_detect(ipmi_user_t user) +{ + /* Chassis support, use it. */ + return (capabilities & 0x80); +} + +static void ipmi_poweroff_chassis(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + powercyclefailed: + printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n", + (poweroff_powercycle ? "cycle" : "down")); + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST; + send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD; + if (poweroff_powercycle) + data[0] = IPMI_CHASSIS_POWER_CYCLE; + else + data[0] = IPMI_CHASSIS_POWER_DOWN; + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + if (poweroff_powercycle) { + /* power cycle failed, default to power down */ + printk(KERN_ERR PFX "Unable to send chassis power " \ + "cycle message, IPMI error 0x%x\n", rv); + poweroff_powercycle = 0; + goto powercyclefailed; + } + + printk(KERN_ERR PFX "Unable to send chassis power " \ + "down message, IPMI error 0x%x\n", rv); + } +} + + +/* Table of possible power off functions. */ +struct poweroff_function { + char *platform_type; + int (*detect)(ipmi_user_t user); + void (*poweroff_func)(ipmi_user_t user); +}; + +static struct poweroff_function poweroff_functions[] = { + { .platform_type = "ATCA", + .detect = ipmi_atca_detect, + .poweroff_func = ipmi_poweroff_atca }, + { .platform_type = "CPI1", + .detect = ipmi_cpi1_detect, + .poweroff_func = ipmi_poweroff_cpi1 }, + { .platform_type = "chassis", + .detect = ipmi_dell_chassis_detect, + .poweroff_func = ipmi_poweroff_chassis }, + /* Chassis should generally be last, other things should override + it. */ + { .platform_type = "chassis", + .detect = ipmi_chassis_detect, + .poweroff_func = ipmi_poweroff_chassis }, +}; +#define NUM_PO_FUNCS (sizeof(poweroff_functions) \ + / sizeof(struct poweroff_function)) + + +/* Called on a powerdown request. */ +static void ipmi_poweroff_function(void) +{ + if (!ready) + return; + + /* Use run-to-completion mode, since interrupts may be off. */ + specific_poweroff_func(ipmi_user); +} + +/* Wait for an IPMI interface to be installed, the first one installed + will be grabbed by this code and used to perform the powerdown. */ +static void ipmi_po_new_smi(int if_num, struct device *device) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + int i; + + if (ready) + return; + + if ((ifnum_to_use >= 0) && (ifnum_to_use != if_num)) + return; + + rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL, + &ipmi_user); + if (rv) { + printk(KERN_ERR PFX "could not create IPMI user, error %d\n", + rv); + return; + } + + ipmi_ifnum = if_num; + + /* + * Do a get device ide and store some results, since this is + * used by several functions. + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + send_msg.netfn = IPMI_NETFN_APP_REQUEST; + send_msg.cmd = IPMI_GET_DEVICE_ID_CMD; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_wait_for_response(ipmi_user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + printk(KERN_ERR PFX "Unable to send IPMI get device id info," + " IPMI error 0x%x\n", rv); + goto out_err; + } + + if (halt_recv_msg.msg.data_len < 12) { + printk(KERN_ERR PFX "(chassis) IPMI get device id info too," + " short, was %d bytes, needed %d bytes\n", + halt_recv_msg.msg.data_len, 12); + goto out_err; + } + + mfg_id = (halt_recv_msg.msg.data[7] + | (halt_recv_msg.msg.data[8] << 8) + | (halt_recv_msg.msg.data[9] << 16)); + prod_id = (halt_recv_msg.msg.data[10] + | (halt_recv_msg.msg.data[11] << 8)); + capabilities = halt_recv_msg.msg.data[6]; + ipmi_version = halt_recv_msg.msg.data[5]; + + + /* Scan for a poweroff method */ + for (i = 0; i < NUM_PO_FUNCS; i++) { + if (poweroff_functions[i].detect(ipmi_user)) + goto found; + } + + out_err: + printk(KERN_ERR PFX "Unable to find a poweroff function that" + " will work, giving up\n"); + ipmi_destroy_user(ipmi_user); + return; + + found: + printk(KERN_INFO PFX "Found a %s style poweroff function\n", + poweroff_functions[i].platform_type); + specific_poweroff_func = poweroff_functions[i].poweroff_func; + old_poweroff_func = pm_power_off; + pm_power_off = ipmi_poweroff_function; + ready = 1; +} + +static void ipmi_po_smi_gone(int if_num) +{ + if (!ready) + return; + + if (ipmi_ifnum != if_num) + return; + + ready = 0; + ipmi_destroy_user(ipmi_user); + pm_power_off = old_poweroff_func; +} + +static struct ipmi_smi_watcher smi_watcher = { + .owner = THIS_MODULE, + .new_smi = ipmi_po_new_smi, + .smi_gone = ipmi_po_smi_gone +}; + + +#ifdef CONFIG_PROC_FS +#include <linux/sysctl.h> + +static struct ctl_table ipmi_table[] = { + { .procname = "poweroff_powercycle", + .data = &poweroff_powercycle, + .maxlen = sizeof(poweroff_powercycle), + .mode = 0644, + .proc_handler = proc_dointvec }, + { } +}; + +static struct ctl_table ipmi_dir_table[] = { + { .procname = "ipmi", + .mode = 0555, + .child = ipmi_table }, + { } +}; + +static struct ctl_table ipmi_root_table[] = { + { .procname = "dev", + .mode = 0555, + .child = ipmi_dir_table }, + { } +}; + +static struct ctl_table_header *ipmi_table_header; +#endif /* CONFIG_PROC_FS */ + +/* + * Startup and shutdown functions. + */ +static int __init ipmi_poweroff_init(void) +{ + int rv; + + printk(KERN_INFO "Copyright (C) 2004 MontaVista Software -" + " IPMI Powerdown via sys_reboot.\n"); + + if (poweroff_powercycle) + printk(KERN_INFO PFX "Power cycle is enabled.\n"); + +#ifdef CONFIG_PROC_FS + ipmi_table_header = register_sysctl_table(ipmi_root_table); + if (!ipmi_table_header) { + printk(KERN_ERR PFX "Unable to register powercycle sysctl\n"); + rv = -ENOMEM; + goto out_err; + } +#endif + + rv = ipmi_smi_watcher_register(&smi_watcher); + +#ifdef CONFIG_PROC_FS + if (rv) { + unregister_sysctl_table(ipmi_table_header); + printk(KERN_ERR PFX "Unable to register SMI watcher: %d\n", rv); + goto out_err; + } + + out_err: +#endif + return rv; +} + +#ifdef MODULE +static void __exit ipmi_poweroff_cleanup(void) +{ + int rv; + +#ifdef CONFIG_PROC_FS + unregister_sysctl_table(ipmi_table_header); +#endif + + ipmi_smi_watcher_unregister(&smi_watcher); + + if (ready) { + rv = ipmi_destroy_user(ipmi_user); + if (rv) + printk(KERN_ERR PFX "could not cleanup the IPMI" + " user: 0x%x\n", rv); + pm_power_off = old_poweroff_func; + } +} +module_exit(ipmi_poweroff_cleanup); +#endif + +module_init(ipmi_poweroff_init); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); +MODULE_DESCRIPTION("IPMI Poweroff extension to sys_reboot"); diff --git a/kernel/drivers/char/ipmi/ipmi_si_intf.c b/kernel/drivers/char/ipmi/ipmi_si_intf.c new file mode 100644 index 000000000..8a45e92ff --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_si_intf.c @@ -0,0 +1,3874 @@ +/* + * ipmi_si.c + * + * The interface to the IPMI driver for the system interfaces (KCS, SMIC, + * BT). + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This file holds the "policy" for the interface to the SMI state + * machine. It does the configuration, handles timers and interrupts, + * and drives the real SMI state machine. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/mutex.h> +#include <linux/kthread.h> +#include <asm/irq.h> +#include <linux/interrupt.h> +#include <linux/rcupdate.h> +#include <linux/ipmi.h> +#include <linux/ipmi_smi.h> +#include <asm/io.h> +#include "ipmi_si_sm.h" +#include <linux/dmi.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/pnp.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#ifdef CONFIG_PARISC +#include <asm/hardware.h> /* for register_parisc_driver() stuff */ +#include <asm/parisc-device.h> +#endif + +#define PFX "ipmi_si: " + +/* Measure times between events in the driver. */ +#undef DEBUG_TIMING + +/* Call every 10 ms. */ +#define SI_TIMEOUT_TIME_USEC 10000 +#define SI_USEC_PER_JIFFY (1000000/HZ) +#define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY) +#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a + short timeout */ + +enum si_intf_state { + SI_NORMAL, + SI_GETTING_FLAGS, + SI_GETTING_EVENTS, + SI_CLEARING_FLAGS, + SI_GETTING_MESSAGES, + SI_CHECKING_ENABLES, + SI_SETTING_ENABLES + /* FIXME - add watchdog stuff. */ +}; + +/* Some BT-specific defines we need here. */ +#define IPMI_BT_INTMASK_REG 2 +#define IPMI_BT_INTMASK_CLEAR_IRQ_BIT 2 +#define IPMI_BT_INTMASK_ENABLE_IRQ_BIT 1 + +enum si_type { + SI_KCS, SI_SMIC, SI_BT +}; +static char *si_to_str[] = { "kcs", "smic", "bt" }; + +#define DEVICE_NAME "ipmi_si" + +static struct platform_driver ipmi_driver; + +/* + * Indexes into stats[] in smi_info below. + */ +enum si_stat_indexes { + /* + * Number of times the driver requested a timer while an operation + * was in progress. + */ + SI_STAT_short_timeouts = 0, + + /* + * Number of times the driver requested a timer while nothing was in + * progress. + */ + SI_STAT_long_timeouts, + + /* Number of times the interface was idle while being polled. */ + SI_STAT_idles, + + /* Number of interrupts the driver handled. */ + SI_STAT_interrupts, + + /* Number of time the driver got an ATTN from the hardware. */ + SI_STAT_attentions, + + /* Number of times the driver requested flags from the hardware. */ + SI_STAT_flag_fetches, + + /* Number of times the hardware didn't follow the state machine. */ + SI_STAT_hosed_count, + + /* Number of completed messages. */ + SI_STAT_complete_transactions, + + /* Number of IPMI events received from the hardware. */ + SI_STAT_events, + + /* Number of watchdog pretimeouts. */ + SI_STAT_watchdog_pretimeouts, + + /* Number of asynchronous messages received. */ + SI_STAT_incoming_messages, + + + /* This *must* remain last, add new values above this. */ + SI_NUM_STATS +}; + +struct smi_info { + int intf_num; + ipmi_smi_t intf; + struct si_sm_data *si_sm; + struct si_sm_handlers *handlers; + enum si_type si_type; + spinlock_t si_lock; + struct ipmi_smi_msg *waiting_msg; + struct ipmi_smi_msg *curr_msg; + enum si_intf_state si_state; + + /* + * Used to handle the various types of I/O that can occur with + * IPMI + */ + struct si_sm_io io; + int (*io_setup)(struct smi_info *info); + void (*io_cleanup)(struct smi_info *info); + int (*irq_setup)(struct smi_info *info); + void (*irq_cleanup)(struct smi_info *info); + unsigned int io_size; + enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */ + void (*addr_source_cleanup)(struct smi_info *info); + void *addr_source_data; + + /* + * Per-OEM handler, called from handle_flags(). Returns 1 + * when handle_flags() needs to be re-run or 0 indicating it + * set si_state itself. + */ + int (*oem_data_avail_handler)(struct smi_info *smi_info); + + /* + * Flags from the last GET_MSG_FLAGS command, used when an ATTN + * is set to hold the flags until we are done handling everything + * from the flags. + */ +#define RECEIVE_MSG_AVAIL 0x01 +#define EVENT_MSG_BUFFER_FULL 0x02 +#define WDT_PRE_TIMEOUT_INT 0x08 +#define OEM0_DATA_AVAIL 0x20 +#define OEM1_DATA_AVAIL 0x40 +#define OEM2_DATA_AVAIL 0x80 +#define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \ + OEM1_DATA_AVAIL | \ + OEM2_DATA_AVAIL) + unsigned char msg_flags; + + /* Does the BMC have an event buffer? */ + bool has_event_buffer; + + /* + * If set to true, this will request events the next time the + * state machine is idle. + */ + atomic_t req_events; + + /* + * If true, run the state machine to completion on every send + * call. Generally used after a panic to make sure stuff goes + * out. + */ + bool run_to_completion; + + /* The I/O port of an SI interface. */ + int port; + + /* + * The space between start addresses of the two ports. For + * instance, if the first port is 0xca2 and the spacing is 4, then + * the second port is 0xca6. + */ + unsigned int spacing; + + /* zero if no irq; */ + int irq; + + /* The timer for this si. */ + struct timer_list si_timer; + + /* This flag is set, if the timer is running (timer_pending() isn't enough) */ + bool timer_running; + + /* The time (in jiffies) the last timeout occurred at. */ + unsigned long last_timeout_jiffies; + + /* Are we waiting for the events, pretimeouts, received msgs? */ + atomic_t need_watch; + + /* + * The driver will disable interrupts when it gets into a + * situation where it cannot handle messages due to lack of + * memory. Once that situation clears up, it will re-enable + * interrupts. + */ + bool interrupt_disabled; + + /* + * Does the BMC support events? + */ + bool supports_event_msg_buff; + + /* + * Can we clear the global enables receive irq bit? + */ + bool cannot_clear_recv_irq_bit; + + /* + * Did we get an attention that we did not handle? + */ + bool got_attn; + + /* From the get device id response... */ + struct ipmi_device_id device_id; + + /* Driver model stuff. */ + struct device *dev; + struct platform_device *pdev; + + /* + * True if we allocated the device, false if it came from + * someplace else (like PCI). + */ + bool dev_registered; + + /* Slave address, could be reported from DMI. */ + unsigned char slave_addr; + + /* Counters and things for the proc filesystem. */ + atomic_t stats[SI_NUM_STATS]; + + struct task_struct *thread; + + struct list_head link; + union ipmi_smi_info_union addr_info; +}; + +#define smi_inc_stat(smi, stat) \ + atomic_inc(&(smi)->stats[SI_STAT_ ## stat]) +#define smi_get_stat(smi, stat) \ + ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat])) + +#define SI_MAX_PARMS 4 + +static int force_kipmid[SI_MAX_PARMS]; +static int num_force_kipmid; +#ifdef CONFIG_PCI +static bool pci_registered; +#endif +#ifdef CONFIG_ACPI +static bool pnp_registered; +#endif +#ifdef CONFIG_PARISC +static bool parisc_registered; +#endif + +static unsigned int kipmid_max_busy_us[SI_MAX_PARMS]; +static int num_max_busy_us; + +static bool unload_when_empty = true; + +static int add_smi(struct smi_info *smi); +static int try_smi_init(struct smi_info *smi); +static void cleanup_one_si(struct smi_info *to_clean); +static void cleanup_ipmi_si(void); + +#ifdef DEBUG_TIMING +void debug_timestamp(char *msg) +{ + struct timespec64 t; + + getnstimeofday64(&t); + pr_debug("**%s: %lld.%9.9ld\n", msg, (long long) t.tv_sec, t.tv_nsec); +} +#else +#define debug_timestamp(x) +#endif + +static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list); +static int register_xaction_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&xaction_notifier_list, nb); +} + +static void deliver_recv_msg(struct smi_info *smi_info, + struct ipmi_smi_msg *msg) +{ + /* Deliver the message to the upper layer. */ + if (smi_info->intf) + ipmi_smi_msg_received(smi_info->intf, msg); + else + ipmi_free_smi_msg(msg); +} + +static void return_hosed_msg(struct smi_info *smi_info, int cCode) +{ + struct ipmi_smi_msg *msg = smi_info->curr_msg; + + if (cCode < 0 || cCode > IPMI_ERR_UNSPECIFIED) + cCode = IPMI_ERR_UNSPECIFIED; + /* else use it as is */ + + /* Make it a response */ + msg->rsp[0] = msg->data[0] | 4; + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = cCode; + msg->rsp_size = 3; + + smi_info->curr_msg = NULL; + deliver_recv_msg(smi_info, msg); +} + +static enum si_sm_result start_next_msg(struct smi_info *smi_info) +{ + int rv; + + if (!smi_info->waiting_msg) { + smi_info->curr_msg = NULL; + rv = SI_SM_IDLE; + } else { + int err; + + smi_info->curr_msg = smi_info->waiting_msg; + smi_info->waiting_msg = NULL; + debug_timestamp("Start2"); + err = atomic_notifier_call_chain(&xaction_notifier_list, + 0, smi_info); + if (err & NOTIFY_STOP_MASK) { + rv = SI_SM_CALL_WITHOUT_DELAY; + goto out; + } + err = smi_info->handlers->start_transaction( + smi_info->si_sm, + smi_info->curr_msg->data, + smi_info->curr_msg->data_size); + if (err) + return_hosed_msg(smi_info, err); + + rv = SI_SM_CALL_WITHOUT_DELAY; + } + out: + return rv; +} + +static void start_check_enables(struct smi_info *smi_info) +{ + unsigned char msg[2]; + + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; + + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + smi_info->si_state = SI_CHECKING_ENABLES; +} + +static void start_clear_flags(struct smi_info *smi_info) +{ + unsigned char msg[3]; + + /* Make sure the watchdog pre-timeout flag is not set at startup. */ + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; + msg[2] = WDT_PRE_TIMEOUT_INT; + + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3); + smi_info->si_state = SI_CLEARING_FLAGS; +} + +static void start_getting_msg_queue(struct smi_info *smi_info) +{ + smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD; + smi_info->curr_msg->data_size = 2; + + smi_info->handlers->start_transaction( + smi_info->si_sm, + smi_info->curr_msg->data, + smi_info->curr_msg->data_size); + smi_info->si_state = SI_GETTING_MESSAGES; +} + +static void start_getting_events(struct smi_info *smi_info) +{ + smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD; + smi_info->curr_msg->data_size = 2; + + smi_info->handlers->start_transaction( + smi_info->si_sm, + smi_info->curr_msg->data, + smi_info->curr_msg->data_size); + smi_info->si_state = SI_GETTING_EVENTS; +} + +static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val) +{ + smi_info->last_timeout_jiffies = jiffies; + mod_timer(&smi_info->si_timer, new_val); + smi_info->timer_running = true; +} + +/* + * When we have a situtaion where we run out of memory and cannot + * allocate messages, we just leave them in the BMC and run the system + * polled until we can allocate some memory. Once we have some + * memory, we will re-enable the interrupt. + * + * Note that we cannot just use disable_irq(), since the interrupt may + * be shared. + */ +static inline bool disable_si_irq(struct smi_info *smi_info) +{ + if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { + smi_info->interrupt_disabled = true; + start_check_enables(smi_info); + return true; + } + return false; +} + +static inline bool enable_si_irq(struct smi_info *smi_info) +{ + if ((smi_info->irq) && (smi_info->interrupt_disabled)) { + smi_info->interrupt_disabled = false; + start_check_enables(smi_info); + return true; + } + return false; +} + +/* + * Allocate a message. If unable to allocate, start the interrupt + * disable process and return NULL. If able to allocate but + * interrupts are disabled, free the message and return NULL after + * starting the interrupt enable process. + */ +static struct ipmi_smi_msg *alloc_msg_handle_irq(struct smi_info *smi_info) +{ + struct ipmi_smi_msg *msg; + + msg = ipmi_alloc_smi_msg(); + if (!msg) { + if (!disable_si_irq(smi_info)) + smi_info->si_state = SI_NORMAL; + } else if (enable_si_irq(smi_info)) { + ipmi_free_smi_msg(msg); + msg = NULL; + } + return msg; +} + +static void handle_flags(struct smi_info *smi_info) +{ + retry: + if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) { + /* Watchdog pre-timeout */ + smi_inc_stat(smi_info, watchdog_pretimeouts); + + start_clear_flags(smi_info); + smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; + if (smi_info->intf) + ipmi_smi_watchdog_pretimeout(smi_info->intf); + } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) { + /* Messages available. */ + smi_info->curr_msg = alloc_msg_handle_irq(smi_info); + if (!smi_info->curr_msg) + return; + + start_getting_msg_queue(smi_info); + } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) { + /* Events available. */ + smi_info->curr_msg = alloc_msg_handle_irq(smi_info); + if (!smi_info->curr_msg) + return; + + start_getting_events(smi_info); + } else if (smi_info->msg_flags & OEM_DATA_AVAIL && + smi_info->oem_data_avail_handler) { + if (smi_info->oem_data_avail_handler(smi_info)) + goto retry; + } else + smi_info->si_state = SI_NORMAL; +} + +/* + * Global enables we care about. + */ +#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \ + IPMI_BMC_EVT_MSG_INTR) + +static u8 current_global_enables(struct smi_info *smi_info, u8 base, + bool *irq_on) +{ + u8 enables = 0; + + if (smi_info->supports_event_msg_buff) + enables |= IPMI_BMC_EVT_MSG_BUFF; + + if ((smi_info->irq && !smi_info->interrupt_disabled) || + smi_info->cannot_clear_recv_irq_bit) + enables |= IPMI_BMC_RCV_MSG_INTR; + + if (smi_info->supports_event_msg_buff && + smi_info->irq && !smi_info->interrupt_disabled) + + enables |= IPMI_BMC_EVT_MSG_INTR; + + *irq_on = enables & (IPMI_BMC_EVT_MSG_INTR | IPMI_BMC_RCV_MSG_INTR); + + return enables; +} + +static void check_bt_irq(struct smi_info *smi_info, bool irq_on) +{ + u8 irqstate = smi_info->io.inputb(&smi_info->io, IPMI_BT_INTMASK_REG); + + irqstate &= IPMI_BT_INTMASK_ENABLE_IRQ_BIT; + + if ((bool)irqstate == irq_on) + return; + + if (irq_on) + smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG, + IPMI_BT_INTMASK_ENABLE_IRQ_BIT); + else + smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG, 0); +} + +static void handle_transaction_done(struct smi_info *smi_info) +{ + struct ipmi_smi_msg *msg; + + debug_timestamp("Done"); + switch (smi_info->si_state) { + case SI_NORMAL: + if (!smi_info->curr_msg) + break; + + smi_info->curr_msg->rsp_size + = smi_info->handlers->get_result( + smi_info->si_sm, + smi_info->curr_msg->rsp, + IPMI_MAX_MSG_LENGTH); + + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ + msg = smi_info->curr_msg; + smi_info->curr_msg = NULL; + deliver_recv_msg(smi_info, msg); + break; + + case SI_GETTING_FLAGS: + { + unsigned char msg[4]; + unsigned int len; + + /* We got the flags from the SMI, now handle them. */ + len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + /* Error fetching flags, just give up for now. */ + smi_info->si_state = SI_NORMAL; + } else if (len < 4) { + /* + * Hmm, no flags. That's technically illegal, but + * don't use uninitialized data. + */ + smi_info->si_state = SI_NORMAL; + } else { + smi_info->msg_flags = msg[3]; + handle_flags(smi_info); + } + break; + } + + case SI_CLEARING_FLAGS: + { + unsigned char msg[3]; + + /* We cleared the flags. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 3); + if (msg[2] != 0) { + /* Error clearing flags */ + dev_warn(smi_info->dev, + "Error clearing flags: %2.2x\n", msg[2]); + } + smi_info->si_state = SI_NORMAL; + break; + } + + case SI_GETTING_EVENTS: + { + smi_info->curr_msg->rsp_size + = smi_info->handlers->get_result( + smi_info->si_sm, + smi_info->curr_msg->rsp, + IPMI_MAX_MSG_LENGTH); + + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ + msg = smi_info->curr_msg; + smi_info->curr_msg = NULL; + if (msg->rsp[2] != 0) { + /* Error getting event, probably done. */ + msg->done(msg); + + /* Take off the event flag. */ + smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; + handle_flags(smi_info); + } else { + smi_inc_stat(smi_info, events); + + /* + * Do this before we deliver the message + * because delivering the message releases the + * lock and something else can mess with the + * state. + */ + handle_flags(smi_info); + + deliver_recv_msg(smi_info, msg); + } + break; + } + + case SI_GETTING_MESSAGES: + { + smi_info->curr_msg->rsp_size + = smi_info->handlers->get_result( + smi_info->si_sm, + smi_info->curr_msg->rsp, + IPMI_MAX_MSG_LENGTH); + + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ + msg = smi_info->curr_msg; + smi_info->curr_msg = NULL; + if (msg->rsp[2] != 0) { + /* Error getting event, probably done. */ + msg->done(msg); + + /* Take off the msg flag. */ + smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL; + handle_flags(smi_info); + } else { + smi_inc_stat(smi_info, incoming_messages); + + /* + * Do this before we deliver the message + * because delivering the message releases the + * lock and something else can mess with the + * state. + */ + handle_flags(smi_info); + + deliver_recv_msg(smi_info, msg); + } + break; + } + + case SI_CHECKING_ENABLES: + { + unsigned char msg[4]; + u8 enables; + bool irq_on; + + /* We got the flags from the SMI, now handle them. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + dev_warn(smi_info->dev, + "Couldn't get irq info: %x.\n", msg[2]); + dev_warn(smi_info->dev, + "Maybe ok, but ipmi might run very slowly.\n"); + smi_info->si_state = SI_NORMAL; + break; + } + enables = current_global_enables(smi_info, 0, &irq_on); + if (smi_info->si_type == SI_BT) + /* BT has its own interrupt enable bit. */ + check_bt_irq(smi_info, irq_on); + if (enables != (msg[3] & GLOBAL_ENABLES_MASK)) { + /* Enables are not correct, fix them. */ + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = enables | (msg[3] & ~GLOBAL_ENABLES_MASK); + smi_info->handlers->start_transaction( + smi_info->si_sm, msg, 3); + smi_info->si_state = SI_SETTING_ENABLES; + } else if (smi_info->supports_event_msg_buff) { + smi_info->curr_msg = ipmi_alloc_smi_msg(); + if (!smi_info->curr_msg) { + smi_info->si_state = SI_NORMAL; + break; + } + start_getting_msg_queue(smi_info); + } else { + smi_info->si_state = SI_NORMAL; + } + break; + } + + case SI_SETTING_ENABLES: + { + unsigned char msg[4]; + + smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) + dev_warn(smi_info->dev, + "Could not set the global enables: 0x%x.\n", + msg[2]); + + if (smi_info->supports_event_msg_buff) { + smi_info->curr_msg = ipmi_alloc_smi_msg(); + if (!smi_info->curr_msg) { + smi_info->si_state = SI_NORMAL; + break; + } + start_getting_msg_queue(smi_info); + } else { + smi_info->si_state = SI_NORMAL; + } + break; + } + } +} + +/* + * Called on timeouts and events. Timeouts should pass the elapsed + * time, interrupts should pass in zero. Must be called with + * si_lock held and interrupts disabled. + */ +static enum si_sm_result smi_event_handler(struct smi_info *smi_info, + int time) +{ + enum si_sm_result si_sm_result; + + restart: + /* + * There used to be a loop here that waited a little while + * (around 25us) before giving up. That turned out to be + * pointless, the minimum delays I was seeing were in the 300us + * range, which is far too long to wait in an interrupt. So + * we just run until the state machine tells us something + * happened or it needs a delay. + */ + si_sm_result = smi_info->handlers->event(smi_info->si_sm, time); + time = 0; + while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY) + si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); + + if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) { + smi_inc_stat(smi_info, complete_transactions); + + handle_transaction_done(smi_info); + si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); + } else if (si_sm_result == SI_SM_HOSED) { + smi_inc_stat(smi_info, hosed_count); + + /* + * Do the before return_hosed_msg, because that + * releases the lock. + */ + smi_info->si_state = SI_NORMAL; + if (smi_info->curr_msg != NULL) { + /* + * If we were handling a user message, format + * a response to send to the upper layer to + * tell it about the error. + */ + return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED); + } + si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); + } + + /* + * We prefer handling attn over new messages. But don't do + * this if there is not yet an upper layer to handle anything. + */ + if (likely(smi_info->intf) && + (si_sm_result == SI_SM_ATTN || smi_info->got_attn)) { + unsigned char msg[2]; + + if (smi_info->si_state != SI_NORMAL) { + /* + * We got an ATTN, but we are doing something else. + * Handle the ATTN later. + */ + smi_info->got_attn = true; + } else { + smi_info->got_attn = false; + smi_inc_stat(smi_info, attentions); + + /* + * Got a attn, send down a get message flags to see + * what's causing it. It would be better to handle + * this in the upper layer, but due to the way + * interrupts work with the SMI, that's not really + * possible. + */ + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_GET_MSG_FLAGS_CMD; + + smi_info->handlers->start_transaction( + smi_info->si_sm, msg, 2); + smi_info->si_state = SI_GETTING_FLAGS; + goto restart; + } + } + + /* If we are currently idle, try to start the next message. */ + if (si_sm_result == SI_SM_IDLE) { + smi_inc_stat(smi_info, idles); + + si_sm_result = start_next_msg(smi_info); + if (si_sm_result != SI_SM_IDLE) + goto restart; + } + + if ((si_sm_result == SI_SM_IDLE) + && (atomic_read(&smi_info->req_events))) { + /* + * We are idle and the upper layer requested that I fetch + * events, so do so. + */ + atomic_set(&smi_info->req_events, 0); + + /* + * Take this opportunity to check the interrupt and + * message enable state for the BMC. The BMC can be + * asynchronously reset, and may thus get interrupts + * disable and messages disabled. + */ + if (smi_info->supports_event_msg_buff || smi_info->irq) { + start_check_enables(smi_info); + } else { + smi_info->curr_msg = alloc_msg_handle_irq(smi_info); + if (!smi_info->curr_msg) + goto out; + + start_getting_events(smi_info); + } + goto restart; + } + out: + return si_sm_result; +} + +static void check_start_timer_thread(struct smi_info *smi_info) +{ + if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) { + smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES); + + if (smi_info->thread) + wake_up_process(smi_info->thread); + + start_next_msg(smi_info); + smi_event_handler(smi_info, 0); + } +} + +static void sender(void *send_info, + struct ipmi_smi_msg *msg) +{ + struct smi_info *smi_info = send_info; + enum si_sm_result result; + unsigned long flags; + + debug_timestamp("Enqueue"); + + if (smi_info->run_to_completion) { + /* + * If we are running to completion, start it and run + * transactions until everything is clear. + */ + smi_info->waiting_msg = msg; + + /* + * Run to completion means we are single-threaded, no + * need for locks. + */ + + result = smi_event_handler(smi_info, 0); + while (result != SI_SM_IDLE) { + udelay(SI_SHORT_TIMEOUT_USEC); + result = smi_event_handler(smi_info, + SI_SHORT_TIMEOUT_USEC); + } + return; + } + + spin_lock_irqsave(&smi_info->si_lock, flags); + /* + * The following two lines don't need to be under the lock for + * the lock's sake, but they do need SMP memory barriers to + * avoid getting things out of order. We are already claiming + * the lock, anyway, so just do it under the lock to avoid the + * ordering problem. + */ + BUG_ON(smi_info->waiting_msg); + smi_info->waiting_msg = msg; + check_start_timer_thread(smi_info); + spin_unlock_irqrestore(&smi_info->si_lock, flags); +} + +static void set_run_to_completion(void *send_info, bool i_run_to_completion) +{ + struct smi_info *smi_info = send_info; + enum si_sm_result result; + + smi_info->run_to_completion = i_run_to_completion; + if (i_run_to_completion) { + result = smi_event_handler(smi_info, 0); + while (result != SI_SM_IDLE) { + udelay(SI_SHORT_TIMEOUT_USEC); + result = smi_event_handler(smi_info, + SI_SHORT_TIMEOUT_USEC); + } + } +} + +/* + * Use -1 in the nsec value of the busy waiting timespec to tell that + * we are spinning in kipmid looking for something and not delaying + * between checks + */ +static inline void ipmi_si_set_not_busy(struct timespec64 *ts) +{ + ts->tv_nsec = -1; +} +static inline int ipmi_si_is_busy(struct timespec64 *ts) +{ + return ts->tv_nsec != -1; +} + +static inline int ipmi_thread_busy_wait(enum si_sm_result smi_result, + const struct smi_info *smi_info, + struct timespec64 *busy_until) +{ + unsigned int max_busy_us = 0; + + if (smi_info->intf_num < num_max_busy_us) + max_busy_us = kipmid_max_busy_us[smi_info->intf_num]; + if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY) + ipmi_si_set_not_busy(busy_until); + else if (!ipmi_si_is_busy(busy_until)) { + getnstimeofday64(busy_until); + timespec64_add_ns(busy_until, max_busy_us*NSEC_PER_USEC); + } else { + struct timespec64 now; + + getnstimeofday64(&now); + if (unlikely(timespec64_compare(&now, busy_until) > 0)) { + ipmi_si_set_not_busy(busy_until); + return 0; + } + } + return 1; +} + + +/* + * A busy-waiting loop for speeding up IPMI operation. + * + * Lousy hardware makes this hard. This is only enabled for systems + * that are not BT and do not have interrupts. It starts spinning + * when an operation is complete or until max_busy tells it to stop + * (if that is enabled). See the paragraph on kimid_max_busy_us in + * Documentation/IPMI.txt for details. + */ +static int ipmi_thread(void *data) +{ + struct smi_info *smi_info = data; + unsigned long flags; + enum si_sm_result smi_result; + struct timespec64 busy_until; + + ipmi_si_set_not_busy(&busy_until); + set_user_nice(current, MAX_NICE); + while (!kthread_should_stop()) { + int busy_wait; + + spin_lock_irqsave(&(smi_info->si_lock), flags); + smi_result = smi_event_handler(smi_info, 0); + + /* + * If the driver is doing something, there is a possible + * race with the timer. If the timer handler see idle, + * and the thread here sees something else, the timer + * handler won't restart the timer even though it is + * required. So start it here if necessary. + */ + if (smi_result != SI_SM_IDLE && !smi_info->timer_running) + smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES); + + spin_unlock_irqrestore(&(smi_info->si_lock), flags); + busy_wait = ipmi_thread_busy_wait(smi_result, smi_info, + &busy_until); + if (smi_result == SI_SM_CALL_WITHOUT_DELAY) + ; /* do nothing */ + else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait) + schedule(); + else if (smi_result == SI_SM_IDLE) { + if (atomic_read(&smi_info->need_watch)) { + schedule_timeout_interruptible(100); + } else { + /* Wait to be woken up when we are needed. */ + __set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } + } else + schedule_timeout_interruptible(1); + } + return 0; +} + + +static void poll(void *send_info) +{ + struct smi_info *smi_info = send_info; + unsigned long flags = 0; + bool run_to_completion = smi_info->run_to_completion; + + /* + * Make sure there is some delay in the poll loop so we can + * drive time forward and timeout things. + */ + udelay(10); + if (!run_to_completion) + spin_lock_irqsave(&smi_info->si_lock, flags); + smi_event_handler(smi_info, 10); + if (!run_to_completion) + spin_unlock_irqrestore(&smi_info->si_lock, flags); +} + +static void request_events(void *send_info) +{ + struct smi_info *smi_info = send_info; + + if (!smi_info->has_event_buffer) + return; + + atomic_set(&smi_info->req_events, 1); +} + +static void set_need_watch(void *send_info, bool enable) +{ + struct smi_info *smi_info = send_info; + unsigned long flags; + + atomic_set(&smi_info->need_watch, enable); + spin_lock_irqsave(&smi_info->si_lock, flags); + check_start_timer_thread(smi_info); + spin_unlock_irqrestore(&smi_info->si_lock, flags); +} + +static int initialized; + +static void smi_timeout(unsigned long data) +{ + struct smi_info *smi_info = (struct smi_info *) data; + enum si_sm_result smi_result; + unsigned long flags; + unsigned long jiffies_now; + long time_diff; + long timeout; + + spin_lock_irqsave(&(smi_info->si_lock), flags); + debug_timestamp("Timer"); + + jiffies_now = jiffies; + time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies) + * SI_USEC_PER_JIFFY); + smi_result = smi_event_handler(smi_info, time_diff); + + if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { + /* Running with interrupts, only do long timeouts. */ + timeout = jiffies + SI_TIMEOUT_JIFFIES; + smi_inc_stat(smi_info, long_timeouts); + goto do_mod_timer; + } + + /* + * If the state machine asks for a short delay, then shorten + * the timer timeout. + */ + if (smi_result == SI_SM_CALL_WITH_DELAY) { + smi_inc_stat(smi_info, short_timeouts); + timeout = jiffies + 1; + } else { + smi_inc_stat(smi_info, long_timeouts); + timeout = jiffies + SI_TIMEOUT_JIFFIES; + } + + do_mod_timer: + if (smi_result != SI_SM_IDLE) + smi_mod_timer(smi_info, timeout); + else + smi_info->timer_running = false; + spin_unlock_irqrestore(&(smi_info->si_lock), flags); +} + +static irqreturn_t si_irq_handler(int irq, void *data) +{ + struct smi_info *smi_info = data; + unsigned long flags; + + spin_lock_irqsave(&(smi_info->si_lock), flags); + + smi_inc_stat(smi_info, interrupts); + + debug_timestamp("Interrupt"); + + smi_event_handler(smi_info, 0); + spin_unlock_irqrestore(&(smi_info->si_lock), flags); + return IRQ_HANDLED; +} + +static irqreturn_t si_bt_irq_handler(int irq, void *data) +{ + struct smi_info *smi_info = data; + /* We need to clear the IRQ flag for the BT interface. */ + smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG, + IPMI_BT_INTMASK_CLEAR_IRQ_BIT + | IPMI_BT_INTMASK_ENABLE_IRQ_BIT); + return si_irq_handler(irq, data); +} + +static int smi_start_processing(void *send_info, + ipmi_smi_t intf) +{ + struct smi_info *new_smi = send_info; + int enable = 0; + + new_smi->intf = intf; + + /* Try to claim any interrupts. */ + if (new_smi->irq_setup) + new_smi->irq_setup(new_smi); + + /* Set up the timer that drives the interface. */ + setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi); + smi_mod_timer(new_smi, jiffies + SI_TIMEOUT_JIFFIES); + + /* + * Check if the user forcefully enabled the daemon. + */ + if (new_smi->intf_num < num_force_kipmid) + enable = force_kipmid[new_smi->intf_num]; + /* + * The BT interface is efficient enough to not need a thread, + * and there is no need for a thread if we have interrupts. + */ + else if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) + enable = 1; + + if (enable) { + new_smi->thread = kthread_run(ipmi_thread, new_smi, + "kipmi%d", new_smi->intf_num); + if (IS_ERR(new_smi->thread)) { + dev_notice(new_smi->dev, "Could not start" + " kernel thread due to error %ld, only using" + " timers to drive the interface\n", + PTR_ERR(new_smi->thread)); + new_smi->thread = NULL; + } + } + + return 0; +} + +static int get_smi_info(void *send_info, struct ipmi_smi_info *data) +{ + struct smi_info *smi = send_info; + + data->addr_src = smi->addr_source; + data->dev = smi->dev; + data->addr_info = smi->addr_info; + get_device(smi->dev); + + return 0; +} + +static void set_maintenance_mode(void *send_info, bool enable) +{ + struct smi_info *smi_info = send_info; + + if (!enable) + atomic_set(&smi_info->req_events, 0); +} + +static struct ipmi_smi_handlers handlers = { + .owner = THIS_MODULE, + .start_processing = smi_start_processing, + .get_smi_info = get_smi_info, + .sender = sender, + .request_events = request_events, + .set_need_watch = set_need_watch, + .set_maintenance_mode = set_maintenance_mode, + .set_run_to_completion = set_run_to_completion, + .poll = poll, +}; + +/* + * There can be 4 IO ports passed in (with or without IRQs), 4 addresses, + * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS. + */ + +static LIST_HEAD(smi_infos); +static DEFINE_MUTEX(smi_infos_lock); +static int smi_num; /* Used to sequence the SMIs */ + +#define DEFAULT_REGSPACING 1 +#define DEFAULT_REGSIZE 1 + +#ifdef CONFIG_ACPI +static bool si_tryacpi = 1; +#endif +#ifdef CONFIG_DMI +static bool si_trydmi = 1; +#endif +static bool si_tryplatform = 1; +#ifdef CONFIG_PCI +static bool si_trypci = 1; +#endif +static bool si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS); +static char *si_type[SI_MAX_PARMS]; +#define MAX_SI_TYPE_STR 30 +static char si_type_str[MAX_SI_TYPE_STR]; +static unsigned long addrs[SI_MAX_PARMS]; +static unsigned int num_addrs; +static unsigned int ports[SI_MAX_PARMS]; +static unsigned int num_ports; +static int irqs[SI_MAX_PARMS]; +static unsigned int num_irqs; +static int regspacings[SI_MAX_PARMS]; +static unsigned int num_regspacings; +static int regsizes[SI_MAX_PARMS]; +static unsigned int num_regsizes; +static int regshifts[SI_MAX_PARMS]; +static unsigned int num_regshifts; +static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */ +static unsigned int num_slave_addrs; + +#define IPMI_IO_ADDR_SPACE 0 +#define IPMI_MEM_ADDR_SPACE 1 +static char *addr_space_to_str[] = { "i/o", "mem" }; + +static int hotmod_handler(const char *val, struct kernel_param *kp); + +module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200); +MODULE_PARM_DESC(hotmod, "Add and remove interfaces. See" + " Documentation/IPMI.txt in the kernel sources for the" + " gory details."); + +#ifdef CONFIG_ACPI +module_param_named(tryacpi, si_tryacpi, bool, 0); +MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the" + " default scan of the interfaces identified via ACPI"); +#endif +#ifdef CONFIG_DMI +module_param_named(trydmi, si_trydmi, bool, 0); +MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the" + " default scan of the interfaces identified via DMI"); +#endif +module_param_named(tryplatform, si_tryplatform, bool, 0); +MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the" + " default scan of the interfaces identified via platform" + " interfaces like openfirmware"); +#ifdef CONFIG_PCI +module_param_named(trypci, si_trypci, bool, 0); +MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the" + " default scan of the interfaces identified via pci"); +#endif +module_param_named(trydefaults, si_trydefaults, bool, 0); +MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the" + " default scan of the KCS and SMIC interface at the standard" + " address"); +module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0); +MODULE_PARM_DESC(type, "Defines the type of each interface, each" + " interface separated by commas. The types are 'kcs'," + " 'smic', and 'bt'. For example si_type=kcs,bt will set" + " the first interface to kcs and the second to bt"); +module_param_array(addrs, ulong, &num_addrs, 0); +MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the" + " addresses separated by commas. Only use if an interface" + " is in memory. Otherwise, set it to zero or leave" + " it blank."); +module_param_array(ports, uint, &num_ports, 0); +MODULE_PARM_DESC(ports, "Sets the port address of each interface, the" + " addresses separated by commas. Only use if an interface" + " is a port. Otherwise, set it to zero or leave" + " it blank."); +module_param_array(irqs, int, &num_irqs, 0); +MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the" + " addresses separated by commas. Only use if an interface" + " has an interrupt. Otherwise, set it to zero or leave" + " it blank."); +module_param_array(regspacings, int, &num_regspacings, 0); +MODULE_PARM_DESC(regspacings, "The number of bytes between the start address" + " and each successive register used by the interface. For" + " instance, if the start address is 0xca2 and the spacing" + " is 2, then the second address is at 0xca4. Defaults" + " to 1."); +module_param_array(regsizes, int, &num_regsizes, 0); +MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes." + " This should generally be 1, 2, 4, or 8 for an 8-bit," + " 16-bit, 32-bit, or 64-bit register. Use this if you" + " the 8-bit IPMI register has to be read from a larger" + " register."); +module_param_array(regshifts, int, &num_regshifts, 0); +MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the." + " IPMI register, in bits. For instance, if the data" + " is read from a 32-bit word and the IPMI data is in" + " bit 8-15, then the shift would be 8"); +module_param_array(slave_addrs, int, &num_slave_addrs, 0); +MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" + " the controller. Normally this is 0x20, but can be" + " overridden by this parm. This is an array indexed" + " by interface number."); +module_param_array(force_kipmid, int, &num_force_kipmid, 0); +MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or" + " disabled(0). Normally the IPMI driver auto-detects" + " this, but the value may be overridden by this parm."); +module_param(unload_when_empty, bool, 0); +MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are" + " specified or found, default is 1. Setting to 0" + " is useful for hot add of devices using hotmod."); +module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644); +MODULE_PARM_DESC(kipmid_max_busy_us, + "Max time (in microseconds) to busy-wait for IPMI data before" + " sleeping. 0 (default) means to wait forever. Set to 100-500" + " if kipmid is using up a lot of CPU time."); + + +static void std_irq_cleanup(struct smi_info *info) +{ + if (info->si_type == SI_BT) + /* Disable the interrupt in the BT interface. */ + info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0); + free_irq(info->irq, info); +} + +static int std_irq_setup(struct smi_info *info) +{ + int rv; + + if (!info->irq) + return 0; + + if (info->si_type == SI_BT) { + rv = request_irq(info->irq, + si_bt_irq_handler, + IRQF_SHARED, + DEVICE_NAME, + info); + if (!rv) + /* Enable the interrupt in the BT interface. */ + info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, + IPMI_BT_INTMASK_ENABLE_IRQ_BIT); + } else + rv = request_irq(info->irq, + si_irq_handler, + IRQF_SHARED, + DEVICE_NAME, + info); + if (rv) { + dev_warn(info->dev, "%s unable to claim interrupt %d," + " running polled\n", + DEVICE_NAME, info->irq); + info->irq = 0; + } else { + info->irq_cleanup = std_irq_cleanup; + dev_info(info->dev, "Using irq %d\n", info->irq); + } + + return rv; +} + +static unsigned char port_inb(struct si_sm_io *io, unsigned int offset) +{ + unsigned int addr = io->addr_data; + + return inb(addr + (offset * io->regspacing)); +} + +static void port_outb(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + unsigned int addr = io->addr_data; + + outb(b, addr + (offset * io->regspacing)); +} + +static unsigned char port_inw(struct si_sm_io *io, unsigned int offset) +{ + unsigned int addr = io->addr_data; + + return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff; +} + +static void port_outw(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + unsigned int addr = io->addr_data; + + outw(b << io->regshift, addr + (offset * io->regspacing)); +} + +static unsigned char port_inl(struct si_sm_io *io, unsigned int offset) +{ + unsigned int addr = io->addr_data; + + return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff; +} + +static void port_outl(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + unsigned int addr = io->addr_data; + + outl(b << io->regshift, addr+(offset * io->regspacing)); +} + +static void port_cleanup(struct smi_info *info) +{ + unsigned int addr = info->io.addr_data; + int idx; + + if (addr) { + for (idx = 0; idx < info->io_size; idx++) + release_region(addr + idx * info->io.regspacing, + info->io.regsize); + } +} + +static int port_setup(struct smi_info *info) +{ + unsigned int addr = info->io.addr_data; + int idx; + + if (!addr) + return -ENODEV; + + info->io_cleanup = port_cleanup; + + /* + * Figure out the actual inb/inw/inl/etc routine to use based + * upon the register size. + */ + switch (info->io.regsize) { + case 1: + info->io.inputb = port_inb; + info->io.outputb = port_outb; + break; + case 2: + info->io.inputb = port_inw; + info->io.outputb = port_outw; + break; + case 4: + info->io.inputb = port_inl; + info->io.outputb = port_outl; + break; + default: + dev_warn(info->dev, "Invalid register size: %d\n", + info->io.regsize); + return -EINVAL; + } + + /* + * Some BIOSes reserve disjoint I/O regions in their ACPI + * tables. This causes problems when trying to register the + * entire I/O region. Therefore we must register each I/O + * port separately. + */ + for (idx = 0; idx < info->io_size; idx++) { + if (request_region(addr + idx * info->io.regspacing, + info->io.regsize, DEVICE_NAME) == NULL) { + /* Undo allocations */ + while (idx--) { + release_region(addr + idx * info->io.regspacing, + info->io.regsize); + } + return -EIO; + } + } + return 0; +} + +static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset) +{ + return readb((io->addr)+(offset * io->regspacing)); +} + +static void intf_mem_outb(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + writeb(b, (io->addr)+(offset * io->regspacing)); +} + +static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset) +{ + return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift) + & 0xff; +} + +static void intf_mem_outw(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + writeb(b << io->regshift, (io->addr)+(offset * io->regspacing)); +} + +static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset) +{ + return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift) + & 0xff; +} + +static void intf_mem_outl(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + writel(b << io->regshift, (io->addr)+(offset * io->regspacing)); +} + +#ifdef readq +static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset) +{ + return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift) + & 0xff; +} + +static void mem_outq(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + writeq(b << io->regshift, (io->addr)+(offset * io->regspacing)); +} +#endif + +static void mem_cleanup(struct smi_info *info) +{ + unsigned long addr = info->io.addr_data; + int mapsize; + + if (info->io.addr) { + iounmap(info->io.addr); + + mapsize = ((info->io_size * info->io.regspacing) + - (info->io.regspacing - info->io.regsize)); + + release_mem_region(addr, mapsize); + } +} + +static int mem_setup(struct smi_info *info) +{ + unsigned long addr = info->io.addr_data; + int mapsize; + + if (!addr) + return -ENODEV; + + info->io_cleanup = mem_cleanup; + + /* + * Figure out the actual readb/readw/readl/etc routine to use based + * upon the register size. + */ + switch (info->io.regsize) { + case 1: + info->io.inputb = intf_mem_inb; + info->io.outputb = intf_mem_outb; + break; + case 2: + info->io.inputb = intf_mem_inw; + info->io.outputb = intf_mem_outw; + break; + case 4: + info->io.inputb = intf_mem_inl; + info->io.outputb = intf_mem_outl; + break; +#ifdef readq + case 8: + info->io.inputb = mem_inq; + info->io.outputb = mem_outq; + break; +#endif + default: + dev_warn(info->dev, "Invalid register size: %d\n", + info->io.regsize); + return -EINVAL; + } + + /* + * Calculate the total amount of memory to claim. This is an + * unusual looking calculation, but it avoids claiming any + * more memory than it has to. It will claim everything + * between the first address to the end of the last full + * register. + */ + mapsize = ((info->io_size * info->io.regspacing) + - (info->io.regspacing - info->io.regsize)); + + if (request_mem_region(addr, mapsize, DEVICE_NAME) == NULL) + return -EIO; + + info->io.addr = ioremap(addr, mapsize); + if (info->io.addr == NULL) { + release_mem_region(addr, mapsize); + return -EIO; + } + return 0; +} + +/* + * Parms come in as <op1>[:op2[:op3...]]. ops are: + * add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]] + * Options are: + * rsp=<regspacing> + * rsi=<regsize> + * rsh=<regshift> + * irq=<irq> + * ipmb=<ipmb addr> + */ +enum hotmod_op { HM_ADD, HM_REMOVE }; +struct hotmod_vals { + char *name; + int val; +}; +static struct hotmod_vals hotmod_ops[] = { + { "add", HM_ADD }, + { "remove", HM_REMOVE }, + { NULL } +}; +static struct hotmod_vals hotmod_si[] = { + { "kcs", SI_KCS }, + { "smic", SI_SMIC }, + { "bt", SI_BT }, + { NULL } +}; +static struct hotmod_vals hotmod_as[] = { + { "mem", IPMI_MEM_ADDR_SPACE }, + { "i/o", IPMI_IO_ADDR_SPACE }, + { NULL } +}; + +static int parse_str(struct hotmod_vals *v, int *val, char *name, char **curr) +{ + char *s; + int i; + + s = strchr(*curr, ','); + if (!s) { + printk(KERN_WARNING PFX "No hotmod %s given.\n", name); + return -EINVAL; + } + *s = '\0'; + s++; + for (i = 0; v[i].name; i++) { + if (strcmp(*curr, v[i].name) == 0) { + *val = v[i].val; + *curr = s; + return 0; + } + } + + printk(KERN_WARNING PFX "Invalid hotmod %s '%s'\n", name, *curr); + return -EINVAL; +} + +static int check_hotmod_int_op(const char *curr, const char *option, + const char *name, int *val) +{ + char *n; + + if (strcmp(curr, name) == 0) { + if (!option) { + printk(KERN_WARNING PFX + "No option given for '%s'\n", + curr); + return -EINVAL; + } + *val = simple_strtoul(option, &n, 0); + if ((*n != '\0') || (*option == '\0')) { + printk(KERN_WARNING PFX + "Bad option given for '%s'\n", + curr); + return -EINVAL; + } + return 1; + } + return 0; +} + +static struct smi_info *smi_info_alloc(void) +{ + struct smi_info *info = kzalloc(sizeof(*info), GFP_KERNEL); + + if (info) + spin_lock_init(&info->si_lock); + return info; +} + +static int hotmod_handler(const char *val, struct kernel_param *kp) +{ + char *str = kstrdup(val, GFP_KERNEL); + int rv; + char *next, *curr, *s, *n, *o; + enum hotmod_op op; + enum si_type si_type; + int addr_space; + unsigned long addr; + int regspacing; + int regsize; + int regshift; + int irq; + int ipmb; + int ival; + int len; + struct smi_info *info; + + if (!str) + return -ENOMEM; + + /* Kill any trailing spaces, as we can get a "\n" from echo. */ + len = strlen(str); + ival = len - 1; + while ((ival >= 0) && isspace(str[ival])) { + str[ival] = '\0'; + ival--; + } + + for (curr = str; curr; curr = next) { + regspacing = 1; + regsize = 1; + regshift = 0; + irq = 0; + ipmb = 0; /* Choose the default if not specified */ + + next = strchr(curr, ':'); + if (next) { + *next = '\0'; + next++; + } + + rv = parse_str(hotmod_ops, &ival, "operation", &curr); + if (rv) + break; + op = ival; + + rv = parse_str(hotmod_si, &ival, "interface type", &curr); + if (rv) + break; + si_type = ival; + + rv = parse_str(hotmod_as, &addr_space, "address space", &curr); + if (rv) + break; + + s = strchr(curr, ','); + if (s) { + *s = '\0'; + s++; + } + addr = simple_strtoul(curr, &n, 0); + if ((*n != '\0') || (*curr == '\0')) { + printk(KERN_WARNING PFX "Invalid hotmod address" + " '%s'\n", curr); + break; + } + + while (s) { + curr = s; + s = strchr(curr, ','); + if (s) { + *s = '\0'; + s++; + } + o = strchr(curr, '='); + if (o) { + *o = '\0'; + o++; + } + rv = check_hotmod_int_op(curr, o, "rsp", ®spacing); + if (rv < 0) + goto out; + else if (rv) + continue; + rv = check_hotmod_int_op(curr, o, "rsi", ®size); + if (rv < 0) + goto out; + else if (rv) + continue; + rv = check_hotmod_int_op(curr, o, "rsh", ®shift); + if (rv < 0) + goto out; + else if (rv) + continue; + rv = check_hotmod_int_op(curr, o, "irq", &irq); + if (rv < 0) + goto out; + else if (rv) + continue; + rv = check_hotmod_int_op(curr, o, "ipmb", &ipmb); + if (rv < 0) + goto out; + else if (rv) + continue; + + rv = -EINVAL; + printk(KERN_WARNING PFX + "Invalid hotmod option '%s'\n", + curr); + goto out; + } + + if (op == HM_ADD) { + info = smi_info_alloc(); + if (!info) { + rv = -ENOMEM; + goto out; + } + + info->addr_source = SI_HOTMOD; + info->si_type = si_type; + info->io.addr_data = addr; + info->io.addr_type = addr_space; + if (addr_space == IPMI_MEM_ADDR_SPACE) + info->io_setup = mem_setup; + else + info->io_setup = port_setup; + + info->io.addr = NULL; + info->io.regspacing = regspacing; + if (!info->io.regspacing) + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = regsize; + if (!info->io.regsize) + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = regshift; + info->irq = irq; + if (info->irq) + info->irq_setup = std_irq_setup; + info->slave_addr = ipmb; + + rv = add_smi(info); + if (rv) { + kfree(info); + goto out; + } + rv = try_smi_init(info); + if (rv) { + cleanup_one_si(info); + goto out; + } + } else { + /* remove */ + struct smi_info *e, *tmp_e; + + mutex_lock(&smi_infos_lock); + list_for_each_entry_safe(e, tmp_e, &smi_infos, link) { + if (e->io.addr_type != addr_space) + continue; + if (e->si_type != si_type) + continue; + if (e->io.addr_data == addr) + cleanup_one_si(e); + } + mutex_unlock(&smi_infos_lock); + } + } + rv = len; + out: + kfree(str); + return rv; +} + +static int hardcode_find_bmc(void) +{ + int ret = -ENODEV; + int i; + struct smi_info *info; + + for (i = 0; i < SI_MAX_PARMS; i++) { + if (!ports[i] && !addrs[i]) + continue; + + info = smi_info_alloc(); + if (!info) + return -ENOMEM; + + info->addr_source = SI_HARDCODED; + printk(KERN_INFO PFX "probing via hardcoded address\n"); + + if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) { + info->si_type = SI_KCS; + } else if (strcmp(si_type[i], "smic") == 0) { + info->si_type = SI_SMIC; + } else if (strcmp(si_type[i], "bt") == 0) { + info->si_type = SI_BT; + } else { + printk(KERN_WARNING PFX "Interface type specified " + "for interface %d, was invalid: %s\n", + i, si_type[i]); + kfree(info); + continue; + } + + if (ports[i]) { + /* An I/O port */ + info->io_setup = port_setup; + info->io.addr_data = ports[i]; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + } else if (addrs[i]) { + /* A memory port */ + info->io_setup = mem_setup; + info->io.addr_data = addrs[i]; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + } else { + printk(KERN_WARNING PFX "Interface type specified " + "for interface %d, but port and address were " + "not set or set to zero.\n", i); + kfree(info); + continue; + } + + info->io.addr = NULL; + info->io.regspacing = regspacings[i]; + if (!info->io.regspacing) + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = regsizes[i]; + if (!info->io.regsize) + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = regshifts[i]; + info->irq = irqs[i]; + if (info->irq) + info->irq_setup = std_irq_setup; + info->slave_addr = slave_addrs[i]; + + if (!add_smi(info)) { + if (try_smi_init(info)) + cleanup_one_si(info); + ret = 0; + } else { + kfree(info); + } + } + return ret; +} + +#ifdef CONFIG_ACPI + +#include <linux/acpi.h> + +/* + * Once we get an ACPI failure, we don't try any more, because we go + * through the tables sequentially. Once we don't find a table, there + * are no more. + */ +static int acpi_failure; + +/* For GPE-type interrupts. */ +static u32 ipmi_acpi_gpe(acpi_handle gpe_device, + u32 gpe_number, void *context) +{ + struct smi_info *smi_info = context; + unsigned long flags; + + spin_lock_irqsave(&(smi_info->si_lock), flags); + + smi_inc_stat(smi_info, interrupts); + + debug_timestamp("ACPI_GPE"); + + smi_event_handler(smi_info, 0); + spin_unlock_irqrestore(&(smi_info->si_lock), flags); + + return ACPI_INTERRUPT_HANDLED; +} + +static void acpi_gpe_irq_cleanup(struct smi_info *info) +{ + if (!info->irq) + return; + + acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe); +} + +static int acpi_gpe_irq_setup(struct smi_info *info) +{ + acpi_status status; + + if (!info->irq) + return 0; + + status = acpi_install_gpe_handler(NULL, + info->irq, + ACPI_GPE_LEVEL_TRIGGERED, + &ipmi_acpi_gpe, + info); + if (status != AE_OK) { + dev_warn(info->dev, "%s unable to claim ACPI GPE %d," + " running polled\n", DEVICE_NAME, info->irq); + info->irq = 0; + return -EINVAL; + } else { + info->irq_cleanup = acpi_gpe_irq_cleanup; + dev_info(info->dev, "Using ACPI GPE %d\n", info->irq); + return 0; + } +} + +/* + * Defined at + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf + */ +struct SPMITable { + s8 Signature[4]; + u32 Length; + u8 Revision; + u8 Checksum; + s8 OEMID[6]; + s8 OEMTableID[8]; + s8 OEMRevision[4]; + s8 CreatorID[4]; + s8 CreatorRevision[4]; + u8 InterfaceType; + u8 IPMIlegacy; + s16 SpecificationRevision; + + /* + * Bit 0 - SCI interrupt supported + * Bit 1 - I/O APIC/SAPIC + */ + u8 InterruptType; + + /* + * If bit 0 of InterruptType is set, then this is the SCI + * interrupt in the GPEx_STS register. + */ + u8 GPE; + + s16 Reserved; + + /* + * If bit 1 of InterruptType is set, then this is the I/O + * APIC/SAPIC interrupt. + */ + u32 GlobalSystemInterrupt; + + /* The actual register address. */ + struct acpi_generic_address addr; + + u8 UID[4]; + + s8 spmi_id[1]; /* A '\0' terminated array starts here. */ +}; + +static int try_init_spmi(struct SPMITable *spmi) +{ + struct smi_info *info; + int rv; + + if (spmi->IPMIlegacy != 1) { + printk(KERN_INFO PFX "Bad SPMI legacy %d\n", spmi->IPMIlegacy); + return -ENODEV; + } + + info = smi_info_alloc(); + if (!info) { + printk(KERN_ERR PFX "Could not allocate SI data (3)\n"); + return -ENOMEM; + } + + info->addr_source = SI_SPMI; + printk(KERN_INFO PFX "probing via SPMI\n"); + + /* Figure out the interface type. */ + switch (spmi->InterfaceType) { + case 1: /* KCS */ + info->si_type = SI_KCS; + break; + case 2: /* SMIC */ + info->si_type = SI_SMIC; + break; + case 3: /* BT */ + info->si_type = SI_BT; + break; + case 4: /* SSIF, just ignore */ + kfree(info); + return -EIO; + default: + printk(KERN_INFO PFX "Unknown ACPI/SPMI SI type %d\n", + spmi->InterfaceType); + kfree(info); + return -EIO; + } + + if (spmi->InterruptType & 1) { + /* We've got a GPE interrupt. */ + info->irq = spmi->GPE; + info->irq_setup = acpi_gpe_irq_setup; + } else if (spmi->InterruptType & 2) { + /* We've got an APIC/SAPIC interrupt. */ + info->irq = spmi->GlobalSystemInterrupt; + info->irq_setup = std_irq_setup; + } else { + /* Use the default interrupt setting. */ + info->irq = 0; + info->irq_setup = NULL; + } + + if (spmi->addr.bit_width) { + /* A (hopefully) properly formed register bit width. */ + info->io.regspacing = spmi->addr.bit_width / 8; + } else { + info->io.regspacing = DEFAULT_REGSPACING; + } + info->io.regsize = info->io.regspacing; + info->io.regshift = spmi->addr.bit_offset; + + if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + info->io_setup = mem_setup; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + } else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) { + info->io_setup = port_setup; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + } else { + kfree(info); + printk(KERN_WARNING PFX "Unknown ACPI I/O Address type\n"); + return -EIO; + } + info->io.addr_data = spmi->addr.address; + + pr_info("ipmi_si: SPMI: %s %#lx regsize %d spacing %d irq %d\n", + (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem", + info->io.addr_data, info->io.regsize, info->io.regspacing, + info->irq); + + rv = add_smi(info); + if (rv) + kfree(info); + + return rv; +} + +static void spmi_find_bmc(void) +{ + acpi_status status; + struct SPMITable *spmi; + int i; + + if (acpi_disabled) + return; + + if (acpi_failure) + return; + + for (i = 0; ; i++) { + status = acpi_get_table(ACPI_SIG_SPMI, i+1, + (struct acpi_table_header **)&spmi); + if (status != AE_OK) + return; + + try_init_spmi(spmi); + } +} + +static int ipmi_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) +{ + struct acpi_device *acpi_dev; + struct smi_info *info; + struct resource *res, *res_second; + acpi_handle handle; + acpi_status status; + unsigned long long tmp; + int rv = -EINVAL; + + acpi_dev = pnp_acpi_device(dev); + if (!acpi_dev) + return -ENODEV; + + info = smi_info_alloc(); + if (!info) + return -ENOMEM; + + info->addr_source = SI_ACPI; + printk(KERN_INFO PFX "probing via ACPI\n"); + + handle = acpi_dev->handle; + info->addr_info.acpi_info.acpi_handle = handle; + + /* _IFT tells us the interface type: KCS, BT, etc */ + status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp); + if (ACPI_FAILURE(status)) { + dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n"); + goto err_free; + } + + switch (tmp) { + case 1: + info->si_type = SI_KCS; + break; + case 2: + info->si_type = SI_SMIC; + break; + case 3: + info->si_type = SI_BT; + break; + case 4: /* SSIF, just ignore */ + rv = -ENODEV; + goto err_free; + default: + dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp); + goto err_free; + } + + res = pnp_get_resource(dev, IORESOURCE_IO, 0); + if (res) { + info->io_setup = port_setup; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + } else { + res = pnp_get_resource(dev, IORESOURCE_MEM, 0); + if (res) { + info->io_setup = mem_setup; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + } + } + if (!res) { + dev_err(&dev->dev, "no I/O or memory address\n"); + goto err_free; + } + info->io.addr_data = res->start; + + info->io.regspacing = DEFAULT_REGSPACING; + res_second = pnp_get_resource(dev, + (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? + IORESOURCE_IO : IORESOURCE_MEM, + 1); + if (res_second) { + if (res_second->start > info->io.addr_data) + info->io.regspacing = res_second->start - info->io.addr_data; + } + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = 0; + + /* If _GPE exists, use it; otherwise use standard interrupts */ + status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp); + if (ACPI_SUCCESS(status)) { + info->irq = tmp; + info->irq_setup = acpi_gpe_irq_setup; + } else if (pnp_irq_valid(dev, 0)) { + info->irq = pnp_irq(dev, 0); + info->irq_setup = std_irq_setup; + } + + info->dev = &dev->dev; + pnp_set_drvdata(dev, info); + + dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n", + res, info->io.regsize, info->io.regspacing, + info->irq); + + rv = add_smi(info); + if (rv) + kfree(info); + + return rv; + +err_free: + kfree(info); + return rv; +} + +static void ipmi_pnp_remove(struct pnp_dev *dev) +{ + struct smi_info *info = pnp_get_drvdata(dev); + + cleanup_one_si(info); +} + +static const struct pnp_device_id pnp_dev_table[] = { + {"IPI0001", 0}, + {"", 0}, +}; + +static struct pnp_driver ipmi_pnp_driver = { + .name = DEVICE_NAME, + .probe = ipmi_pnp_probe, + .remove = ipmi_pnp_remove, + .id_table = pnp_dev_table, +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); +#endif + +#ifdef CONFIG_DMI +struct dmi_ipmi_data { + u8 type; + u8 addr_space; + unsigned long base_addr; + u8 irq; + u8 offset; + u8 slave_addr; +}; + +static int decode_dmi(const struct dmi_header *dm, + struct dmi_ipmi_data *dmi) +{ + const u8 *data = (const u8 *)dm; + unsigned long base_addr; + u8 reg_spacing; + u8 len = dm->length; + + dmi->type = data[4]; + + memcpy(&base_addr, data+8, sizeof(unsigned long)); + if (len >= 0x11) { + if (base_addr & 1) { + /* I/O */ + base_addr &= 0xFFFE; + dmi->addr_space = IPMI_IO_ADDR_SPACE; + } else + /* Memory */ + dmi->addr_space = IPMI_MEM_ADDR_SPACE; + + /* If bit 4 of byte 0x10 is set, then the lsb for the address + is odd. */ + dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); + + dmi->irq = data[0x11]; + + /* The top two bits of byte 0x10 hold the register spacing. */ + reg_spacing = (data[0x10] & 0xC0) >> 6; + switch (reg_spacing) { + case 0x00: /* Byte boundaries */ + dmi->offset = 1; + break; + case 0x01: /* 32-bit boundaries */ + dmi->offset = 4; + break; + case 0x02: /* 16-byte boundaries */ + dmi->offset = 16; + break; + default: + /* Some other interface, just ignore it. */ + return -EIO; + } + } else { + /* Old DMI spec. */ + /* + * Note that technically, the lower bit of the base + * address should be 1 if the address is I/O and 0 if + * the address is in memory. So many systems get that + * wrong (and all that I have seen are I/O) so we just + * ignore that bit and assume I/O. Systems that use + * memory should use the newer spec, anyway. + */ + dmi->base_addr = base_addr & 0xfffe; + dmi->addr_space = IPMI_IO_ADDR_SPACE; + dmi->offset = 1; + } + + dmi->slave_addr = data[6]; + + return 0; +} + +static void try_init_dmi(struct dmi_ipmi_data *ipmi_data) +{ + struct smi_info *info; + + info = smi_info_alloc(); + if (!info) { + printk(KERN_ERR PFX "Could not allocate SI data\n"); + return; + } + + info->addr_source = SI_SMBIOS; + printk(KERN_INFO PFX "probing via SMBIOS\n"); + + switch (ipmi_data->type) { + case 0x01: /* KCS */ + info->si_type = SI_KCS; + break; + case 0x02: /* SMIC */ + info->si_type = SI_SMIC; + break; + case 0x03: /* BT */ + info->si_type = SI_BT; + break; + default: + kfree(info); + return; + } + + switch (ipmi_data->addr_space) { + case IPMI_MEM_ADDR_SPACE: + info->io_setup = mem_setup; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + break; + + case IPMI_IO_ADDR_SPACE: + info->io_setup = port_setup; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + break; + + default: + kfree(info); + printk(KERN_WARNING PFX "Unknown SMBIOS I/O Address type: %d\n", + ipmi_data->addr_space); + return; + } + info->io.addr_data = ipmi_data->base_addr; + + info->io.regspacing = ipmi_data->offset; + if (!info->io.regspacing) + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = 0; + + info->slave_addr = ipmi_data->slave_addr; + + info->irq = ipmi_data->irq; + if (info->irq) + info->irq_setup = std_irq_setup; + + pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n", + (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem", + info->io.addr_data, info->io.regsize, info->io.regspacing, + info->irq); + + if (add_smi(info)) + kfree(info); +} + +static void dmi_find_bmc(void) +{ + const struct dmi_device *dev = NULL; + struct dmi_ipmi_data data; + int rv; + + while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) { + memset(&data, 0, sizeof(data)); + rv = decode_dmi((const struct dmi_header *) dev->device_data, + &data); + if (!rv) + try_init_dmi(&data); + } +} +#endif /* CONFIG_DMI */ + +#ifdef CONFIG_PCI + +#define PCI_ERMC_CLASSCODE 0x0C0700 +#define PCI_ERMC_CLASSCODE_MASK 0xffffff00 +#define PCI_ERMC_CLASSCODE_TYPE_MASK 0xff +#define PCI_ERMC_CLASSCODE_TYPE_SMIC 0x00 +#define PCI_ERMC_CLASSCODE_TYPE_KCS 0x01 +#define PCI_ERMC_CLASSCODE_TYPE_BT 0x02 + +#define PCI_HP_VENDOR_ID 0x103C +#define PCI_MMC_DEVICE_ID 0x121A +#define PCI_MMC_ADDR_CW 0x10 + +static void ipmi_pci_cleanup(struct smi_info *info) +{ + struct pci_dev *pdev = info->addr_source_data; + + pci_disable_device(pdev); +} + +static int ipmi_pci_probe_regspacing(struct smi_info *info) +{ + if (info->si_type == SI_KCS) { + unsigned char status; + int regspacing; + + info->io.regsize = DEFAULT_REGSIZE; + info->io.regshift = 0; + info->io_size = 2; + info->handlers = &kcs_smi_handlers; + + /* detect 1, 4, 16byte spacing */ + for (regspacing = DEFAULT_REGSPACING; regspacing <= 16;) { + info->io.regspacing = regspacing; + if (info->io_setup(info)) { + dev_err(info->dev, + "Could not setup I/O space\n"); + return DEFAULT_REGSPACING; + } + /* write invalid cmd */ + info->io.outputb(&info->io, 1, 0x10); + /* read status back */ + status = info->io.inputb(&info->io, 1); + info->io_cleanup(info); + if (status) + return regspacing; + regspacing *= 4; + } + } + return DEFAULT_REGSPACING; +} + +static int ipmi_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rv; + int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK; + struct smi_info *info; + + info = smi_info_alloc(); + if (!info) + return -ENOMEM; + + info->addr_source = SI_PCI; + dev_info(&pdev->dev, "probing via PCI"); + + switch (class_type) { + case PCI_ERMC_CLASSCODE_TYPE_SMIC: + info->si_type = SI_SMIC; + break; + + case PCI_ERMC_CLASSCODE_TYPE_KCS: + info->si_type = SI_KCS; + break; + + case PCI_ERMC_CLASSCODE_TYPE_BT: + info->si_type = SI_BT; + break; + + default: + kfree(info); + dev_info(&pdev->dev, "Unknown IPMI type: %d\n", class_type); + return -ENOMEM; + } + + rv = pci_enable_device(pdev); + if (rv) { + dev_err(&pdev->dev, "couldn't enable PCI device\n"); + kfree(info); + return rv; + } + + info->addr_source_cleanup = ipmi_pci_cleanup; + info->addr_source_data = pdev; + + if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) { + info->io_setup = port_setup; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + } else { + info->io_setup = mem_setup; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + } + info->io.addr_data = pci_resource_start(pdev, 0); + + info->io.regspacing = ipmi_pci_probe_regspacing(info); + info->io.regsize = DEFAULT_REGSIZE; + info->io.regshift = 0; + + info->irq = pdev->irq; + if (info->irq) + info->irq_setup = std_irq_setup; + + info->dev = &pdev->dev; + pci_set_drvdata(pdev, info); + + dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n", + &pdev->resource[0], info->io.regsize, info->io.regspacing, + info->irq); + + rv = add_smi(info); + if (rv) { + kfree(info); + pci_disable_device(pdev); + } + + return rv; +} + +static void ipmi_pci_remove(struct pci_dev *pdev) +{ + struct smi_info *info = pci_get_drvdata(pdev); + cleanup_one_si(info); + pci_disable_device(pdev); +} + +static struct pci_device_id ipmi_pci_devices[] = { + { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) }, + { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); + +static struct pci_driver ipmi_pci_driver = { + .name = DEVICE_NAME, + .id_table = ipmi_pci_devices, + .probe = ipmi_pci_probe, + .remove = ipmi_pci_remove, +}; +#endif /* CONFIG_PCI */ + +static const struct of_device_id ipmi_match[]; +static int ipmi_probe(struct platform_device *dev) +{ +#ifdef CONFIG_OF + const struct of_device_id *match; + struct smi_info *info; + struct resource resource; + const __be32 *regsize, *regspacing, *regshift; + struct device_node *np = dev->dev.of_node; + int ret; + int proplen; + + dev_info(&dev->dev, "probing via device tree\n"); + + match = of_match_device(ipmi_match, &dev->dev); + if (!match) + return -EINVAL; + + if (!of_device_is_available(np)) + return -EINVAL; + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_warn(&dev->dev, PFX "invalid address from OF\n"); + return ret; + } + + regsize = of_get_property(np, "reg-size", &proplen); + if (regsize && proplen != 4) { + dev_warn(&dev->dev, PFX "invalid regsize from OF\n"); + return -EINVAL; + } + + regspacing = of_get_property(np, "reg-spacing", &proplen); + if (regspacing && proplen != 4) { + dev_warn(&dev->dev, PFX "invalid regspacing from OF\n"); + return -EINVAL; + } + + regshift = of_get_property(np, "reg-shift", &proplen); + if (regshift && proplen != 4) { + dev_warn(&dev->dev, PFX "invalid regshift from OF\n"); + return -EINVAL; + } + + info = smi_info_alloc(); + + if (!info) { + dev_err(&dev->dev, + "could not allocate memory for OF probe\n"); + return -ENOMEM; + } + + info->si_type = (enum si_type) match->data; + info->addr_source = SI_DEVICETREE; + info->irq_setup = std_irq_setup; + + if (resource.flags & IORESOURCE_IO) { + info->io_setup = port_setup; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + } else { + info->io_setup = mem_setup; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + } + + info->io.addr_data = resource.start; + + info->io.regsize = regsize ? be32_to_cpup(regsize) : DEFAULT_REGSIZE; + info->io.regspacing = regspacing ? be32_to_cpup(regspacing) : DEFAULT_REGSPACING; + info->io.regshift = regshift ? be32_to_cpup(regshift) : 0; + + info->irq = irq_of_parse_and_map(dev->dev.of_node, 0); + info->dev = &dev->dev; + + dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %d\n", + info->io.addr_data, info->io.regsize, info->io.regspacing, + info->irq); + + dev_set_drvdata(&dev->dev, info); + + ret = add_smi(info); + if (ret) { + kfree(info); + return ret; + } +#endif + return 0; +} + +static int ipmi_remove(struct platform_device *dev) +{ +#ifdef CONFIG_OF + cleanup_one_si(dev_get_drvdata(&dev->dev)); +#endif + return 0; +} + +static const struct of_device_id ipmi_match[] = +{ + { .type = "ipmi", .compatible = "ipmi-kcs", + .data = (void *)(unsigned long) SI_KCS }, + { .type = "ipmi", .compatible = "ipmi-smic", + .data = (void *)(unsigned long) SI_SMIC }, + { .type = "ipmi", .compatible = "ipmi-bt", + .data = (void *)(unsigned long) SI_BT }, + {}, +}; + +static struct platform_driver ipmi_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = ipmi_match, + }, + .probe = ipmi_probe, + .remove = ipmi_remove, +}; + +#ifdef CONFIG_PARISC +static int ipmi_parisc_probe(struct parisc_device *dev) +{ + struct smi_info *info; + int rv; + + info = smi_info_alloc(); + + if (!info) { + dev_err(&dev->dev, + "could not allocate memory for PARISC probe\n"); + return -ENOMEM; + } + + info->si_type = SI_KCS; + info->addr_source = SI_DEVICETREE; + info->io_setup = mem_setup; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + info->io.addr_data = dev->hpa.start; + info->io.regsize = 1; + info->io.regspacing = 1; + info->io.regshift = 0; + info->irq = 0; /* no interrupt */ + info->irq_setup = NULL; + info->dev = &dev->dev; + + dev_dbg(&dev->dev, "addr 0x%lx\n", info->io.addr_data); + + dev_set_drvdata(&dev->dev, info); + + rv = add_smi(info); + if (rv) { + kfree(info); + return rv; + } + + return 0; +} + +static int ipmi_parisc_remove(struct parisc_device *dev) +{ + cleanup_one_si(dev_get_drvdata(&dev->dev)); + return 0; +} + +static struct parisc_device_id ipmi_parisc_tbl[] = { + { HPHW_MC, HVERSION_REV_ANY_ID, 0x004, 0xC0 }, + { 0, } +}; + +static struct parisc_driver ipmi_parisc_driver = { + .name = "ipmi", + .id_table = ipmi_parisc_tbl, + .probe = ipmi_parisc_probe, + .remove = ipmi_parisc_remove, +}; +#endif /* CONFIG_PARISC */ + +static int wait_for_msg_done(struct smi_info *smi_info) +{ + enum si_sm_result smi_result; + + smi_result = smi_info->handlers->event(smi_info->si_sm, 0); + for (;;) { + if (smi_result == SI_SM_CALL_WITH_DELAY || + smi_result == SI_SM_CALL_WITH_TICK_DELAY) { + schedule_timeout_uninterruptible(1); + smi_result = smi_info->handlers->event( + smi_info->si_sm, jiffies_to_usecs(1)); + } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { + smi_result = smi_info->handlers->event( + smi_info->si_sm, 0); + } else + break; + } + if (smi_result == SI_SM_HOSED) + /* + * We couldn't get the state machine to run, so whatever's at + * the port is probably not an IPMI SMI interface. + */ + return -ENODEV; + + return 0; +} + +static int try_get_dev_id(struct smi_info *smi_info) +{ + unsigned char msg[2]; + unsigned char *resp; + unsigned long resp_len; + int rv = 0; + + resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + /* + * Do a Get Device ID command, since it comes back with some + * useful info. + */ + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_DEVICE_ID_CMD; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + + rv = wait_for_msg_done(smi_info); + if (rv) + goto out; + + resp_len = smi_info->handlers->get_result(smi_info->si_sm, + resp, IPMI_MAX_MSG_LENGTH); + + /* Check and record info from the get device id, in case we need it. */ + rv = ipmi_demangle_device_id(resp, resp_len, &smi_info->device_id); + + out: + kfree(resp); + return rv; +} + +/* + * Some BMCs do not support clearing the receive irq bit in the global + * enables (even if they don't support interrupts on the BMC). Check + * for this and handle it properly. + */ +static void check_clr_rcv_irq(struct smi_info *smi_info) +{ + unsigned char msg[3]; + unsigned char *resp; + unsigned long resp_len; + int rv; + + resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!resp) { + printk(KERN_WARNING PFX "Out of memory allocating response for" + " global enables command, cannot check recv irq bit" + " handling.\n"); + return; + } + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + + rv = wait_for_msg_done(smi_info); + if (rv) { + printk(KERN_WARNING PFX "Error getting response from get" + " global enables command, cannot check recv irq bit" + " handling.\n"); + goto out; + } + + resp_len = smi_info->handlers->get_result(smi_info->si_sm, + resp, IPMI_MAX_MSG_LENGTH); + + if (resp_len < 4 || + resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 || + resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD || + resp[2] != 0) { + printk(KERN_WARNING PFX "Invalid return from get global" + " enables command, cannot check recv irq bit" + " handling.\n"); + rv = -EINVAL; + goto out; + } + + if ((resp[3] & IPMI_BMC_RCV_MSG_INTR) == 0) + /* Already clear, should work ok. */ + goto out; + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = resp[3] & ~IPMI_BMC_RCV_MSG_INTR; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3); + + rv = wait_for_msg_done(smi_info); + if (rv) { + printk(KERN_WARNING PFX "Error getting response from set" + " global enables command, cannot check recv irq bit" + " handling.\n"); + goto out; + } + + resp_len = smi_info->handlers->get_result(smi_info->si_sm, + resp, IPMI_MAX_MSG_LENGTH); + + if (resp_len < 3 || + resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 || + resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) { + printk(KERN_WARNING PFX "Invalid return from get global" + " enables command, cannot check recv irq bit" + " handling.\n"); + rv = -EINVAL; + goto out; + } + + if (resp[2] != 0) { + /* + * An error when setting the event buffer bit means + * clearing the bit is not supported. + */ + printk(KERN_WARNING PFX "The BMC does not support clearing" + " the recv irq bit, compensating, but the BMC needs to" + " be fixed.\n"); + smi_info->cannot_clear_recv_irq_bit = true; + } + out: + kfree(resp); +} + +static int try_enable_event_buffer(struct smi_info *smi_info) +{ + unsigned char msg[3]; + unsigned char *resp; + unsigned long resp_len; + int rv = 0; + + resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + + rv = wait_for_msg_done(smi_info); + if (rv) { + printk(KERN_WARNING PFX "Error getting response from get" + " global enables command, the event buffer is not" + " enabled.\n"); + goto out; + } + + resp_len = smi_info->handlers->get_result(smi_info->si_sm, + resp, IPMI_MAX_MSG_LENGTH); + + if (resp_len < 4 || + resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 || + resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD || + resp[2] != 0) { + printk(KERN_WARNING PFX "Invalid return from get global" + " enables command, cannot enable the event buffer.\n"); + rv = -EINVAL; + goto out; + } + + if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) { + /* buffer is already enabled, nothing to do. */ + smi_info->supports_event_msg_buff = true; + goto out; + } + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3); + + rv = wait_for_msg_done(smi_info); + if (rv) { + printk(KERN_WARNING PFX "Error getting response from set" + " global, enables command, the event buffer is not" + " enabled.\n"); + goto out; + } + + resp_len = smi_info->handlers->get_result(smi_info->si_sm, + resp, IPMI_MAX_MSG_LENGTH); + + if (resp_len < 3 || + resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 || + resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) { + printk(KERN_WARNING PFX "Invalid return from get global," + "enables command, not enable the event buffer.\n"); + rv = -EINVAL; + goto out; + } + + if (resp[2] != 0) + /* + * An error when setting the event buffer bit means + * that the event buffer is not supported. + */ + rv = -ENOENT; + else + smi_info->supports_event_msg_buff = true; + + out: + kfree(resp); + return rv; +} + +static int smi_type_proc_show(struct seq_file *m, void *v) +{ + struct smi_info *smi = m->private; + + seq_printf(m, "%s\n", si_to_str[smi->si_type]); + + return 0; +} + +static int smi_type_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, smi_type_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations smi_type_proc_ops = { + .open = smi_type_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smi_si_stats_proc_show(struct seq_file *m, void *v) +{ + struct smi_info *smi = m->private; + + seq_printf(m, "interrupts_enabled: %d\n", + smi->irq && !smi->interrupt_disabled); + seq_printf(m, "short_timeouts: %u\n", + smi_get_stat(smi, short_timeouts)); + seq_printf(m, "long_timeouts: %u\n", + smi_get_stat(smi, long_timeouts)); + seq_printf(m, "idles: %u\n", + smi_get_stat(smi, idles)); + seq_printf(m, "interrupts: %u\n", + smi_get_stat(smi, interrupts)); + seq_printf(m, "attentions: %u\n", + smi_get_stat(smi, attentions)); + seq_printf(m, "flag_fetches: %u\n", + smi_get_stat(smi, flag_fetches)); + seq_printf(m, "hosed_count: %u\n", + smi_get_stat(smi, hosed_count)); + seq_printf(m, "complete_transactions: %u\n", + smi_get_stat(smi, complete_transactions)); + seq_printf(m, "events: %u\n", + smi_get_stat(smi, events)); + seq_printf(m, "watchdog_pretimeouts: %u\n", + smi_get_stat(smi, watchdog_pretimeouts)); + seq_printf(m, "incoming_messages: %u\n", + smi_get_stat(smi, incoming_messages)); + return 0; +} + +static int smi_si_stats_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, smi_si_stats_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations smi_si_stats_proc_ops = { + .open = smi_si_stats_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smi_params_proc_show(struct seq_file *m, void *v) +{ + struct smi_info *smi = m->private; + + seq_printf(m, + "%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n", + si_to_str[smi->si_type], + addr_space_to_str[smi->io.addr_type], + smi->io.addr_data, + smi->io.regspacing, + smi->io.regsize, + smi->io.regshift, + smi->irq, + smi->slave_addr); + + return 0; +} + +static int smi_params_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, smi_params_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations smi_params_proc_ops = { + .open = smi_params_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * oem_data_avail_to_receive_msg_avail + * @info - smi_info structure with msg_flags set + * + * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL + * Returns 1 indicating need to re-run handle_flags(). + */ +static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info) +{ + smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) | + RECEIVE_MSG_AVAIL); + return 1; +} + +/* + * setup_dell_poweredge_oem_data_handler + * @info - smi_info.device_id must be populated + * + * Systems that match, but have firmware version < 1.40 may assert + * OEM0_DATA_AVAIL on their own, without being told via Set Flags that + * it's safe to do so. Such systems will de-assert OEM1_DATA_AVAIL + * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags + * as RECEIVE_MSG_AVAIL instead. + * + * As Dell has no plans to release IPMI 1.5 firmware that *ever* + * assert the OEM[012] bits, and if it did, the driver would have to + * change to handle that properly, we don't actually check for the + * firmware version. + * Device ID = 0x20 BMC on PowerEdge 8G servers + * Device Revision = 0x80 + * Firmware Revision1 = 0x01 BMC version 1.40 + * Firmware Revision2 = 0x40 BCD encoded + * IPMI Version = 0x51 IPMI 1.5 + * Manufacturer ID = A2 02 00 Dell IANA + * + * Additionally, PowerEdge systems with IPMI < 1.5 may also assert + * OEM0_DATA_AVAIL and needs to be treated as RECEIVE_MSG_AVAIL. + * + */ +#define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20 +#define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80 +#define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51 +#define DELL_IANA_MFR_ID 0x0002a2 +static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info) +{ + struct ipmi_device_id *id = &smi_info->device_id; + if (id->manufacturer_id == DELL_IANA_MFR_ID) { + if (id->device_id == DELL_POWEREDGE_8G_BMC_DEVICE_ID && + id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV && + id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) { + smi_info->oem_data_avail_handler = + oem_data_avail_to_receive_msg_avail; + } else if (ipmi_version_major(id) < 1 || + (ipmi_version_major(id) == 1 && + ipmi_version_minor(id) < 5)) { + smi_info->oem_data_avail_handler = + oem_data_avail_to_receive_msg_avail; + } + } +} + +#define CANNOT_RETURN_REQUESTED_LENGTH 0xCA +static void return_hosed_msg_badsize(struct smi_info *smi_info) +{ + struct ipmi_smi_msg *msg = smi_info->curr_msg; + + /* Make it a response */ + msg->rsp[0] = msg->data[0] | 4; + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = CANNOT_RETURN_REQUESTED_LENGTH; + msg->rsp_size = 3; + smi_info->curr_msg = NULL; + deliver_recv_msg(smi_info, msg); +} + +/* + * dell_poweredge_bt_xaction_handler + * @info - smi_info.device_id must be populated + * + * Dell PowerEdge servers with the BT interface (x6xx and 1750) will + * not respond to a Get SDR command if the length of the data + * requested is exactly 0x3A, which leads to command timeouts and no + * data returned. This intercepts such commands, and causes userspace + * callers to try again with a different-sized buffer, which succeeds. + */ + +#define STORAGE_NETFN 0x0A +#define STORAGE_CMD_GET_SDR 0x23 +static int dell_poweredge_bt_xaction_handler(struct notifier_block *self, + unsigned long unused, + void *in) +{ + struct smi_info *smi_info = in; + unsigned char *data = smi_info->curr_msg->data; + unsigned int size = smi_info->curr_msg->data_size; + if (size >= 8 && + (data[0]>>2) == STORAGE_NETFN && + data[1] == STORAGE_CMD_GET_SDR && + data[7] == 0x3A) { + return_hosed_msg_badsize(smi_info); + return NOTIFY_STOP; + } + return NOTIFY_DONE; +} + +static struct notifier_block dell_poweredge_bt_xaction_notifier = { + .notifier_call = dell_poweredge_bt_xaction_handler, +}; + +/* + * setup_dell_poweredge_bt_xaction_handler + * @info - smi_info.device_id must be filled in already + * + * Fills in smi_info.device_id.start_transaction_pre_hook + * when we know what function to use there. + */ +static void +setup_dell_poweredge_bt_xaction_handler(struct smi_info *smi_info) +{ + struct ipmi_device_id *id = &smi_info->device_id; + if (id->manufacturer_id == DELL_IANA_MFR_ID && + smi_info->si_type == SI_BT) + register_xaction_notifier(&dell_poweredge_bt_xaction_notifier); +} + +/* + * setup_oem_data_handler + * @info - smi_info.device_id must be filled in already + * + * Fills in smi_info.device_id.oem_data_available_handler + * when we know what function to use there. + */ + +static void setup_oem_data_handler(struct smi_info *smi_info) +{ + setup_dell_poweredge_oem_data_handler(smi_info); +} + +static void setup_xaction_handlers(struct smi_info *smi_info) +{ + setup_dell_poweredge_bt_xaction_handler(smi_info); +} + +static inline void wait_for_timer_and_thread(struct smi_info *smi_info) +{ + if (smi_info->thread != NULL) + kthread_stop(smi_info->thread); + if (smi_info->timer_running) + del_timer_sync(&smi_info->si_timer); +} + +static struct ipmi_default_vals +{ + int type; + int port; +} ipmi_defaults[] = +{ + { .type = SI_KCS, .port = 0xca2 }, + { .type = SI_SMIC, .port = 0xca9 }, + { .type = SI_BT, .port = 0xe4 }, + { .port = 0 } +}; + +static void default_find_bmc(void) +{ + struct smi_info *info; + int i; + + for (i = 0; ; i++) { + if (!ipmi_defaults[i].port) + break; +#ifdef CONFIG_PPC + if (check_legacy_ioport(ipmi_defaults[i].port)) + continue; +#endif + info = smi_info_alloc(); + if (!info) + return; + + info->addr_source = SI_DEFAULT; + + info->si_type = ipmi_defaults[i].type; + info->io_setup = port_setup; + info->io.addr_data = ipmi_defaults[i].port; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + + info->io.addr = NULL; + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = 0; + + if (add_smi(info) == 0) { + if ((try_smi_init(info)) == 0) { + /* Found one... */ + printk(KERN_INFO PFX "Found default %s" + " state machine at %s address 0x%lx\n", + si_to_str[info->si_type], + addr_space_to_str[info->io.addr_type], + info->io.addr_data); + } else + cleanup_one_si(info); + } else { + kfree(info); + } + } +} + +static int is_new_interface(struct smi_info *info) +{ + struct smi_info *e; + + list_for_each_entry(e, &smi_infos, link) { + if (e->io.addr_type != info->io.addr_type) + continue; + if (e->io.addr_data == info->io.addr_data) + return 0; + } + + return 1; +} + +static int add_smi(struct smi_info *new_smi) +{ + int rv = 0; + + printk(KERN_INFO PFX "Adding %s-specified %s state machine", + ipmi_addr_src_to_str(new_smi->addr_source), + si_to_str[new_smi->si_type]); + mutex_lock(&smi_infos_lock); + if (!is_new_interface(new_smi)) { + printk(KERN_CONT " duplicate interface\n"); + rv = -EBUSY; + goto out_err; + } + + printk(KERN_CONT "\n"); + + /* So we know not to free it unless we have allocated one. */ + new_smi->intf = NULL; + new_smi->si_sm = NULL; + new_smi->handlers = NULL; + + list_add_tail(&new_smi->link, &smi_infos); + +out_err: + mutex_unlock(&smi_infos_lock); + return rv; +} + +static int try_smi_init(struct smi_info *new_smi) +{ + int rv = 0; + int i; + + printk(KERN_INFO PFX "Trying %s-specified %s state" + " machine at %s address 0x%lx, slave address 0x%x," + " irq %d\n", + ipmi_addr_src_to_str(new_smi->addr_source), + si_to_str[new_smi->si_type], + addr_space_to_str[new_smi->io.addr_type], + new_smi->io.addr_data, + new_smi->slave_addr, new_smi->irq); + + switch (new_smi->si_type) { + case SI_KCS: + new_smi->handlers = &kcs_smi_handlers; + break; + + case SI_SMIC: + new_smi->handlers = &smic_smi_handlers; + break; + + case SI_BT: + new_smi->handlers = &bt_smi_handlers; + break; + + default: + /* No support for anything else yet. */ + rv = -EIO; + goto out_err; + } + + /* Allocate the state machine's data and initialize it. */ + new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL); + if (!new_smi->si_sm) { + printk(KERN_ERR PFX + "Could not allocate state machine memory\n"); + rv = -ENOMEM; + goto out_err; + } + new_smi->io_size = new_smi->handlers->init_data(new_smi->si_sm, + &new_smi->io); + + /* Now that we know the I/O size, we can set up the I/O. */ + rv = new_smi->io_setup(new_smi); + if (rv) { + printk(KERN_ERR PFX "Could not set up I/O space\n"); + goto out_err; + } + + /* Do low-level detection first. */ + if (new_smi->handlers->detect(new_smi->si_sm)) { + if (new_smi->addr_source) + printk(KERN_INFO PFX "Interface detection failed\n"); + rv = -ENODEV; + goto out_err; + } + + /* + * Attempt a get device id command. If it fails, we probably + * don't have a BMC here. + */ + rv = try_get_dev_id(new_smi); + if (rv) { + if (new_smi->addr_source) + printk(KERN_INFO PFX "There appears to be no BMC" + " at this location\n"); + goto out_err; + } + + check_clr_rcv_irq(new_smi); + + setup_oem_data_handler(new_smi); + setup_xaction_handlers(new_smi); + + new_smi->waiting_msg = NULL; + new_smi->curr_msg = NULL; + atomic_set(&new_smi->req_events, 0); + new_smi->run_to_completion = false; + for (i = 0; i < SI_NUM_STATS; i++) + atomic_set(&new_smi->stats[i], 0); + + new_smi->interrupt_disabled = true; + atomic_set(&new_smi->need_watch, 0); + new_smi->intf_num = smi_num; + smi_num++; + + rv = try_enable_event_buffer(new_smi); + if (rv == 0) + new_smi->has_event_buffer = true; + + /* + * Start clearing the flags before we enable interrupts or the + * timer to avoid racing with the timer. + */ + start_clear_flags(new_smi); + + /* + * IRQ is defined to be set when non-zero. req_events will + * cause a global flags check that will enable interrupts. + */ + if (new_smi->irq) { + new_smi->interrupt_disabled = false; + atomic_set(&new_smi->req_events, 1); + } + + if (!new_smi->dev) { + /* + * If we don't already have a device from something + * else (like PCI), then register a new one. + */ + new_smi->pdev = platform_device_alloc("ipmi_si", + new_smi->intf_num); + if (!new_smi->pdev) { + printk(KERN_ERR PFX + "Unable to allocate platform device\n"); + goto out_err; + } + new_smi->dev = &new_smi->pdev->dev; + new_smi->dev->driver = &ipmi_driver.driver; + + rv = platform_device_add(new_smi->pdev); + if (rv) { + printk(KERN_ERR PFX + "Unable to register system interface device:" + " %d\n", + rv); + goto out_err; + } + new_smi->dev_registered = true; + } + + rv = ipmi_register_smi(&handlers, + new_smi, + &new_smi->device_id, + new_smi->dev, + new_smi->slave_addr); + if (rv) { + dev_err(new_smi->dev, "Unable to register device: error %d\n", + rv); + goto out_err_stop_timer; + } + + rv = ipmi_smi_add_proc_entry(new_smi->intf, "type", + &smi_type_proc_ops, + new_smi); + if (rv) { + dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv); + goto out_err_stop_timer; + } + + rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats", + &smi_si_stats_proc_ops, + new_smi); + if (rv) { + dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv); + goto out_err_stop_timer; + } + + rv = ipmi_smi_add_proc_entry(new_smi->intf, "params", + &smi_params_proc_ops, + new_smi); + if (rv) { + dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv); + goto out_err_stop_timer; + } + + dev_info(new_smi->dev, "IPMI %s interface initialized\n", + si_to_str[new_smi->si_type]); + + return 0; + + out_err_stop_timer: + wait_for_timer_and_thread(new_smi); + + out_err: + new_smi->interrupt_disabled = true; + + if (new_smi->intf) { + ipmi_smi_t intf = new_smi->intf; + new_smi->intf = NULL; + ipmi_unregister_smi(intf); + } + + if (new_smi->irq_cleanup) { + new_smi->irq_cleanup(new_smi); + new_smi->irq_cleanup = NULL; + } + + /* + * Wait until we know that we are out of any interrupt + * handlers might have been running before we freed the + * interrupt. + */ + synchronize_sched(); + + if (new_smi->si_sm) { + if (new_smi->handlers) + new_smi->handlers->cleanup(new_smi->si_sm); + kfree(new_smi->si_sm); + new_smi->si_sm = NULL; + } + if (new_smi->addr_source_cleanup) { + new_smi->addr_source_cleanup(new_smi); + new_smi->addr_source_cleanup = NULL; + } + if (new_smi->io_cleanup) { + new_smi->io_cleanup(new_smi); + new_smi->io_cleanup = NULL; + } + + if (new_smi->dev_registered) { + platform_device_unregister(new_smi->pdev); + new_smi->dev_registered = false; + } + + return rv; +} + +static int init_ipmi_si(void) +{ + int i; + char *str; + int rv; + struct smi_info *e; + enum ipmi_addr_src type = SI_INVALID; + + if (initialized) + return 0; + initialized = 1; + + if (si_tryplatform) { + rv = platform_driver_register(&ipmi_driver); + if (rv) { + printk(KERN_ERR PFX "Unable to register " + "driver: %d\n", rv); + return rv; + } + } + + /* Parse out the si_type string into its components. */ + str = si_type_str; + if (*str != '\0') { + for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) { + si_type[i] = str; + str = strchr(str, ','); + if (str) { + *str = '\0'; + str++; + } else { + break; + } + } + } + + printk(KERN_INFO "IPMI System Interface driver.\n"); + + /* If the user gave us a device, they presumably want us to use it */ + if (!hardcode_find_bmc()) + return 0; + +#ifdef CONFIG_PCI + if (si_trypci) { + rv = pci_register_driver(&ipmi_pci_driver); + if (rv) + printk(KERN_ERR PFX "Unable to register " + "PCI driver: %d\n", rv); + else + pci_registered = true; + } +#endif + +#ifdef CONFIG_ACPI + if (si_tryacpi) { + pnp_register_driver(&ipmi_pnp_driver); + pnp_registered = true; + } +#endif + +#ifdef CONFIG_DMI + if (si_trydmi) + dmi_find_bmc(); +#endif + +#ifdef CONFIG_ACPI + if (si_tryacpi) + spmi_find_bmc(); +#endif + +#ifdef CONFIG_PARISC + register_parisc_driver(&ipmi_parisc_driver); + parisc_registered = true; + /* poking PC IO addresses will crash machine, don't do it */ + si_trydefaults = 0; +#endif + + /* We prefer devices with interrupts, but in the case of a machine + with multiple BMCs we assume that there will be several instances + of a given type so if we succeed in registering a type then also + try to register everything else of the same type */ + + mutex_lock(&smi_infos_lock); + list_for_each_entry(e, &smi_infos, link) { + /* Try to register a device if it has an IRQ and we either + haven't successfully registered a device yet or this + device has the same type as one we successfully registered */ + if (e->irq && (!type || e->addr_source == type)) { + if (!try_smi_init(e)) { + type = e->addr_source; + } + } + } + + /* type will only have been set if we successfully registered an si */ + if (type) { + mutex_unlock(&smi_infos_lock); + return 0; + } + + /* Fall back to the preferred device */ + + list_for_each_entry(e, &smi_infos, link) { + if (!e->irq && (!type || e->addr_source == type)) { + if (!try_smi_init(e)) { + type = e->addr_source; + } + } + } + mutex_unlock(&smi_infos_lock); + + if (type) + return 0; + + if (si_trydefaults) { + mutex_lock(&smi_infos_lock); + if (list_empty(&smi_infos)) { + /* No BMC was found, try defaults. */ + mutex_unlock(&smi_infos_lock); + default_find_bmc(); + } else + mutex_unlock(&smi_infos_lock); + } + + mutex_lock(&smi_infos_lock); + if (unload_when_empty && list_empty(&smi_infos)) { + mutex_unlock(&smi_infos_lock); + cleanup_ipmi_si(); + printk(KERN_WARNING PFX + "Unable to find any System Interface(s)\n"); + return -ENODEV; + } else { + mutex_unlock(&smi_infos_lock); + return 0; + } +} +module_init(init_ipmi_si); + +static void cleanup_one_si(struct smi_info *to_clean) +{ + int rv = 0; + + if (!to_clean) + return; + + if (to_clean->intf) { + ipmi_smi_t intf = to_clean->intf; + + to_clean->intf = NULL; + rv = ipmi_unregister_smi(intf); + if (rv) { + pr_err(PFX "Unable to unregister device: errno=%d\n", + rv); + } + } + + if (to_clean->dev) + dev_set_drvdata(to_clean->dev, NULL); + + list_del(&to_clean->link); + + /* + * Make sure that interrupts, the timer and the thread are + * stopped and will not run again. + */ + if (to_clean->irq_cleanup) + to_clean->irq_cleanup(to_clean); + wait_for_timer_and_thread(to_clean); + + /* + * Timeouts are stopped, now make sure the interrupts are off + * in the BMC. Note that timers and CPU interrupts are off, + * so no need for locks. + */ + while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { + poll(to_clean); + schedule_timeout_uninterruptible(1); + } + disable_si_irq(to_clean); + while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { + poll(to_clean); + schedule_timeout_uninterruptible(1); + } + + if (to_clean->handlers) + to_clean->handlers->cleanup(to_clean->si_sm); + + kfree(to_clean->si_sm); + + if (to_clean->addr_source_cleanup) + to_clean->addr_source_cleanup(to_clean); + if (to_clean->io_cleanup) + to_clean->io_cleanup(to_clean); + + if (to_clean->dev_registered) + platform_device_unregister(to_clean->pdev); + + kfree(to_clean); +} + +static void cleanup_ipmi_si(void) +{ + struct smi_info *e, *tmp_e; + + if (!initialized) + return; + +#ifdef CONFIG_PCI + if (pci_registered) + pci_unregister_driver(&ipmi_pci_driver); +#endif +#ifdef CONFIG_ACPI + if (pnp_registered) + pnp_unregister_driver(&ipmi_pnp_driver); +#endif +#ifdef CONFIG_PARISC + if (parisc_registered) + unregister_parisc_driver(&ipmi_parisc_driver); +#endif + + platform_driver_unregister(&ipmi_driver); + + mutex_lock(&smi_infos_lock); + list_for_each_entry_safe(e, tmp_e, &smi_infos, link) + cleanup_one_si(e); + mutex_unlock(&smi_infos_lock); +} +module_exit(cleanup_ipmi_si); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); +MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT" + " system interfaces."); diff --git a/kernel/drivers/char/ipmi/ipmi_si_sm.h b/kernel/drivers/char/ipmi/ipmi_si_sm.h new file mode 100644 index 000000000..df89f7347 --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_si_sm.h @@ -0,0 +1,141 @@ +/* + * ipmi_si_sm.h + * + * State machine interface for low-level IPMI system management + * interface state machines. This code is the interface between + * the ipmi_smi code (that handles the policy of a KCS, SMIC, or + * BT interface) and the actual low-level state machine. + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This is defined by the state machines themselves, it is an opaque + * data type for them to use. + */ +struct si_sm_data; + +/* + * The structure for doing I/O in the state machine. The state + * machine doesn't have the actual I/O routines, they are done through + * this interface. + */ +struct si_sm_io { + unsigned char (*inputb)(struct si_sm_io *io, unsigned int offset); + void (*outputb)(struct si_sm_io *io, + unsigned int offset, + unsigned char b); + + /* + * Generic info used by the actual handling routines, the + * state machine shouldn't touch these. + */ + void __iomem *addr; + int regspacing; + int regsize; + int regshift; + int addr_type; + long addr_data; +}; + +/* Results of SMI events. */ +enum si_sm_result { + SI_SM_CALL_WITHOUT_DELAY, /* Call the driver again immediately */ + SI_SM_CALL_WITH_DELAY, /* Delay some before calling again. */ + SI_SM_CALL_WITH_TICK_DELAY,/* Delay >=1 tick before calling again. */ + SI_SM_TRANSACTION_COMPLETE, /* A transaction is finished. */ + SI_SM_IDLE, /* The SM is in idle state. */ + SI_SM_HOSED, /* The hardware violated the state machine. */ + + /* + * The hardware is asserting attn and the state machine is + * idle. + */ + SI_SM_ATTN +}; + +/* Handlers for the SMI state machine. */ +struct si_sm_handlers { + /* + * Put the version number of the state machine here so the + * upper layer can print it. + */ + char *version; + + /* + * Initialize the data and return the amount of I/O space to + * reserve for the space. + */ + unsigned int (*init_data)(struct si_sm_data *smi, + struct si_sm_io *io); + + /* + * Start a new transaction in the state machine. This will + * return -2 if the state machine is not idle, -1 if the size + * is invalid (to large or too small), or 0 if the transaction + * is successfully completed. + */ + int (*start_transaction)(struct si_sm_data *smi, + unsigned char *data, unsigned int size); + + /* + * Return the results after the transaction. This will return + * -1 if the buffer is too small, zero if no transaction is + * present, or the actual length of the result data. + */ + int (*get_result)(struct si_sm_data *smi, + unsigned char *data, unsigned int length); + + /* + * Call this periodically (for a polled interface) or upon + * receiving an interrupt (for a interrupt-driven interface). + * If interrupt driven, you should probably poll this + * periodically when not in idle state. This should be called + * with the time that passed since the last call, if it is + * significant. Time is in microseconds. + */ + enum si_sm_result (*event)(struct si_sm_data *smi, long time); + + /* + * Attempt to detect an SMI. Returns 0 on success or nonzero + * on failure. + */ + int (*detect)(struct si_sm_data *smi); + + /* The interface is shutting down, so clean it up. */ + void (*cleanup)(struct si_sm_data *smi); + + /* Return the size of the SMI structure in bytes. */ + int (*size)(void); +}; + +/* Current state machines that we can use. */ +extern struct si_sm_handlers kcs_smi_handlers; +extern struct si_sm_handlers smic_smi_handlers; +extern struct si_sm_handlers bt_smi_handlers; + diff --git a/kernel/drivers/char/ipmi/ipmi_smic_sm.c b/kernel/drivers/char/ipmi/ipmi_smic_sm.c new file mode 100644 index 000000000..c8e77afa8 --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_smic_sm.c @@ -0,0 +1,600 @@ +/* + * ipmi_smic_sm.c + * + * The state-machine driver for an IPMI SMIC driver + * + * It started as a copy of Corey Minyard's driver for the KSC interface + * and the kernel patch "mmcdev-patch-245" by HP + * + * modified by: Hannes Schulz <schulz@schwaar.com> + * ipmi@schwaar.com + * + * + * Corey Minyard's driver for the KSC interface has the following + * copyright notice: + * Copyright 2002 MontaVista Software Inc. + * + * the kernel patch "mmcdev-patch-245" by HP has the following + * copyright notice: + * (c) Copyright 2001 Grant Grundler (c) Copyright + * 2001 Hewlett-Packard Company + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include <linux/kernel.h> /* For printk. */ +#include <linux/string.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/ipmi_msgdefs.h> /* for completion codes */ +#include "ipmi_si_sm.h" + +/* smic_debug is a bit-field + * SMIC_DEBUG_ENABLE - turned on for now + * SMIC_DEBUG_MSG - commands and their responses + * SMIC_DEBUG_STATES - state machine +*/ +#define SMIC_DEBUG_STATES 4 +#define SMIC_DEBUG_MSG 2 +#define SMIC_DEBUG_ENABLE 1 + +static int smic_debug = 1; +module_param(smic_debug, int, 0644); +MODULE_PARM_DESC(smic_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); + +enum smic_states { + SMIC_IDLE, + SMIC_START_OP, + SMIC_OP_OK, + SMIC_WRITE_START, + SMIC_WRITE_NEXT, + SMIC_WRITE_END, + SMIC_WRITE2READ, + SMIC_READ_START, + SMIC_READ_NEXT, + SMIC_READ_END, + SMIC_HOSED +}; + +#define MAX_SMIC_READ_SIZE 80 +#define MAX_SMIC_WRITE_SIZE 80 +#define SMIC_MAX_ERROR_RETRIES 3 + +/* Timeouts in microseconds. */ +#define SMIC_RETRY_TIMEOUT (2*USEC_PER_SEC) + +/* SMIC Flags Register Bits */ +#define SMIC_RX_DATA_READY 0x80 +#define SMIC_TX_DATA_READY 0x40 + +/* + * SMIC_SMI and SMIC_EVM_DATA_AVAIL are only used by + * a few systems, and then only by Systems Management + * Interrupts, not by the OS. Always ignore these bits. + * + */ +#define SMIC_SMI 0x10 +#define SMIC_EVM_DATA_AVAIL 0x08 +#define SMIC_SMS_DATA_AVAIL 0x04 +#define SMIC_FLAG_BSY 0x01 + +/* SMIC Error Codes */ +#define EC_NO_ERROR 0x00 +#define EC_ABORTED 0x01 +#define EC_ILLEGAL_CONTROL 0x02 +#define EC_NO_RESPONSE 0x03 +#define EC_ILLEGAL_COMMAND 0x04 +#define EC_BUFFER_FULL 0x05 + +struct si_sm_data { + enum smic_states state; + struct si_sm_io *io; + unsigned char write_data[MAX_SMIC_WRITE_SIZE]; + int write_pos; + int write_count; + int orig_write_count; + unsigned char read_data[MAX_SMIC_READ_SIZE]; + int read_pos; + int truncated; + unsigned int error_retries; + long smic_timeout; +}; + +static unsigned int init_smic_data(struct si_sm_data *smic, + struct si_sm_io *io) +{ + smic->state = SMIC_IDLE; + smic->io = io; + smic->write_pos = 0; + smic->write_count = 0; + smic->orig_write_count = 0; + smic->read_pos = 0; + smic->error_retries = 0; + smic->truncated = 0; + smic->smic_timeout = SMIC_RETRY_TIMEOUT; + + /* We use 3 bytes of I/O. */ + return 3; +} + +static int start_smic_transaction(struct si_sm_data *smic, + unsigned char *data, unsigned int size) +{ + unsigned int i; + + if (size < 2) + return IPMI_REQ_LEN_INVALID_ERR; + if (size > MAX_SMIC_WRITE_SIZE) + return IPMI_REQ_LEN_EXCEEDED_ERR; + + if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) + return IPMI_NOT_IN_MY_STATE_ERR; + + if (smic_debug & SMIC_DEBUG_MSG) { + printk(KERN_DEBUG "start_smic_transaction -"); + for (i = 0; i < size; i++) + printk(" %02x", (unsigned char) data[i]); + printk("\n"); + } + smic->error_retries = 0; + memcpy(smic->write_data, data, size); + smic->write_count = size; + smic->orig_write_count = size; + smic->write_pos = 0; + smic->read_pos = 0; + smic->state = SMIC_START_OP; + smic->smic_timeout = SMIC_RETRY_TIMEOUT; + return 0; +} + +static int smic_get_result(struct si_sm_data *smic, + unsigned char *data, unsigned int length) +{ + int i; + + if (smic_debug & SMIC_DEBUG_MSG) { + printk(KERN_DEBUG "smic_get result -"); + for (i = 0; i < smic->read_pos; i++) + printk(" %02x", smic->read_data[i]); + printk("\n"); + } + if (length < smic->read_pos) { + smic->read_pos = length; + smic->truncated = 1; + } + memcpy(data, smic->read_data, smic->read_pos); + + if ((length >= 3) && (smic->read_pos < 3)) { + data[2] = IPMI_ERR_UNSPECIFIED; + smic->read_pos = 3; + } + if (smic->truncated) { + data[2] = IPMI_ERR_MSG_TRUNCATED; + smic->truncated = 0; + } + return smic->read_pos; +} + +static inline unsigned char read_smic_flags(struct si_sm_data *smic) +{ + return smic->io->inputb(smic->io, 2); +} + +static inline unsigned char read_smic_status(struct si_sm_data *smic) +{ + return smic->io->inputb(smic->io, 1); +} + +static inline unsigned char read_smic_data(struct si_sm_data *smic) +{ + return smic->io->inputb(smic->io, 0); +} + +static inline void write_smic_flags(struct si_sm_data *smic, + unsigned char flags) +{ + smic->io->outputb(smic->io, 2, flags); +} + +static inline void write_smic_control(struct si_sm_data *smic, + unsigned char control) +{ + smic->io->outputb(smic->io, 1, control); +} + +static inline void write_si_sm_data(struct si_sm_data *smic, + unsigned char data) +{ + smic->io->outputb(smic->io, 0, data); +} + +static inline void start_error_recovery(struct si_sm_data *smic, char *reason) +{ + (smic->error_retries)++; + if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) { + if (smic_debug & SMIC_DEBUG_ENABLE) + printk(KERN_WARNING + "ipmi_smic_drv: smic hosed: %s\n", reason); + smic->state = SMIC_HOSED; + } else { + smic->write_count = smic->orig_write_count; + smic->write_pos = 0; + smic->read_pos = 0; + smic->state = SMIC_START_OP; + smic->smic_timeout = SMIC_RETRY_TIMEOUT; + } +} + +static inline void write_next_byte(struct si_sm_data *smic) +{ + write_si_sm_data(smic, smic->write_data[smic->write_pos]); + (smic->write_pos)++; + (smic->write_count)--; +} + +static inline void read_next_byte(struct si_sm_data *smic) +{ + if (smic->read_pos >= MAX_SMIC_READ_SIZE) { + read_smic_data(smic); + smic->truncated = 1; + } else { + smic->read_data[smic->read_pos] = read_smic_data(smic); + smic->read_pos++; + } +} + +/* SMIC Control/Status Code Components */ +#define SMIC_GET_STATUS 0x00 /* Control form's name */ +#define SMIC_READY 0x00 /* Status form's name */ +#define SMIC_WR_START 0x01 /* Unified Control/Status names... */ +#define SMIC_WR_NEXT 0x02 +#define SMIC_WR_END 0x03 +#define SMIC_RD_START 0x04 +#define SMIC_RD_NEXT 0x05 +#define SMIC_RD_END 0x06 +#define SMIC_CODE_MASK 0x0f + +#define SMIC_CONTROL 0x00 +#define SMIC_STATUS 0x80 +#define SMIC_CS_MASK 0x80 + +#define SMIC_SMS 0x40 +#define SMIC_SMM 0x60 +#define SMIC_STREAM_MASK 0x60 + +/* SMIC Control Codes */ +#define SMIC_CC_SMS_GET_STATUS (SMIC_CONTROL|SMIC_SMS|SMIC_GET_STATUS) +#define SMIC_CC_SMS_WR_START (SMIC_CONTROL|SMIC_SMS|SMIC_WR_START) +#define SMIC_CC_SMS_WR_NEXT (SMIC_CONTROL|SMIC_SMS|SMIC_WR_NEXT) +#define SMIC_CC_SMS_WR_END (SMIC_CONTROL|SMIC_SMS|SMIC_WR_END) +#define SMIC_CC_SMS_RD_START (SMIC_CONTROL|SMIC_SMS|SMIC_RD_START) +#define SMIC_CC_SMS_RD_NEXT (SMIC_CONTROL|SMIC_SMS|SMIC_RD_NEXT) +#define SMIC_CC_SMS_RD_END (SMIC_CONTROL|SMIC_SMS|SMIC_RD_END) + +#define SMIC_CC_SMM_GET_STATUS (SMIC_CONTROL|SMIC_SMM|SMIC_GET_STATUS) +#define SMIC_CC_SMM_WR_START (SMIC_CONTROL|SMIC_SMM|SMIC_WR_START) +#define SMIC_CC_SMM_WR_NEXT (SMIC_CONTROL|SMIC_SMM|SMIC_WR_NEXT) +#define SMIC_CC_SMM_WR_END (SMIC_CONTROL|SMIC_SMM|SMIC_WR_END) +#define SMIC_CC_SMM_RD_START (SMIC_CONTROL|SMIC_SMM|SMIC_RD_START) +#define SMIC_CC_SMM_RD_NEXT (SMIC_CONTROL|SMIC_SMM|SMIC_RD_NEXT) +#define SMIC_CC_SMM_RD_END (SMIC_CONTROL|SMIC_SMM|SMIC_RD_END) + +/* SMIC Status Codes */ +#define SMIC_SC_SMS_READY (SMIC_STATUS|SMIC_SMS|SMIC_READY) +#define SMIC_SC_SMS_WR_START (SMIC_STATUS|SMIC_SMS|SMIC_WR_START) +#define SMIC_SC_SMS_WR_NEXT (SMIC_STATUS|SMIC_SMS|SMIC_WR_NEXT) +#define SMIC_SC_SMS_WR_END (SMIC_STATUS|SMIC_SMS|SMIC_WR_END) +#define SMIC_SC_SMS_RD_START (SMIC_STATUS|SMIC_SMS|SMIC_RD_START) +#define SMIC_SC_SMS_RD_NEXT (SMIC_STATUS|SMIC_SMS|SMIC_RD_NEXT) +#define SMIC_SC_SMS_RD_END (SMIC_STATUS|SMIC_SMS|SMIC_RD_END) + +#define SMIC_SC_SMM_READY (SMIC_STATUS|SMIC_SMM|SMIC_READY) +#define SMIC_SC_SMM_WR_START (SMIC_STATUS|SMIC_SMM|SMIC_WR_START) +#define SMIC_SC_SMM_WR_NEXT (SMIC_STATUS|SMIC_SMM|SMIC_WR_NEXT) +#define SMIC_SC_SMM_WR_END (SMIC_STATUS|SMIC_SMM|SMIC_WR_END) +#define SMIC_SC_SMM_RD_START (SMIC_STATUS|SMIC_SMM|SMIC_RD_START) +#define SMIC_SC_SMM_RD_NEXT (SMIC_STATUS|SMIC_SMM|SMIC_RD_NEXT) +#define SMIC_SC_SMM_RD_END (SMIC_STATUS|SMIC_SMM|SMIC_RD_END) + +/* these are the control/status codes we actually use + SMIC_CC_SMS_GET_STATUS 0x40 + SMIC_CC_SMS_WR_START 0x41 + SMIC_CC_SMS_WR_NEXT 0x42 + SMIC_CC_SMS_WR_END 0x43 + SMIC_CC_SMS_RD_START 0x44 + SMIC_CC_SMS_RD_NEXT 0x45 + SMIC_CC_SMS_RD_END 0x46 + + SMIC_SC_SMS_READY 0xC0 + SMIC_SC_SMS_WR_START 0xC1 + SMIC_SC_SMS_WR_NEXT 0xC2 + SMIC_SC_SMS_WR_END 0xC3 + SMIC_SC_SMS_RD_START 0xC4 + SMIC_SC_SMS_RD_NEXT 0xC5 + SMIC_SC_SMS_RD_END 0xC6 +*/ + +static enum si_sm_result smic_event(struct si_sm_data *smic, long time) +{ + unsigned char status; + unsigned char flags; + unsigned char data; + + if (smic->state == SMIC_HOSED) { + init_smic_data(smic, smic->io); + return SI_SM_HOSED; + } + if (smic->state != SMIC_IDLE) { + if (smic_debug & SMIC_DEBUG_STATES) + printk(KERN_DEBUG + "smic_event - smic->smic_timeout = %ld," + " time = %ld\n", + smic->smic_timeout, time); + /* + * FIXME: smic_event is sometimes called with time > + * SMIC_RETRY_TIMEOUT + */ + if (time < SMIC_RETRY_TIMEOUT) { + smic->smic_timeout -= time; + if (smic->smic_timeout < 0) { + start_error_recovery(smic, "smic timed out."); + return SI_SM_CALL_WITH_DELAY; + } + } + } + flags = read_smic_flags(smic); + if (flags & SMIC_FLAG_BSY) + return SI_SM_CALL_WITH_DELAY; + + status = read_smic_status(smic); + if (smic_debug & SMIC_DEBUG_STATES) + printk(KERN_DEBUG + "smic_event - state = %d, flags = 0x%02x," + " status = 0x%02x\n", + smic->state, flags, status); + + switch (smic->state) { + case SMIC_IDLE: + /* in IDLE we check for available messages */ + if (flags & SMIC_SMS_DATA_AVAIL) + return SI_SM_ATTN; + return SI_SM_IDLE; + + case SMIC_START_OP: + /* sanity check whether smic is really idle */ + write_smic_control(smic, SMIC_CC_SMS_GET_STATUS); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_OP_OK; + break; + + case SMIC_OP_OK: + if (status != SMIC_SC_SMS_READY) { + /* this should not happen */ + start_error_recovery(smic, + "state = SMIC_OP_OK," + " status != SMIC_SC_SMS_READY"); + return SI_SM_CALL_WITH_DELAY; + } + /* OK so far; smic is idle let us start ... */ + write_smic_control(smic, SMIC_CC_SMS_WR_START); + write_next_byte(smic); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_WRITE_START; + break; + + case SMIC_WRITE_START: + if (status != SMIC_SC_SMS_WR_START) { + start_error_recovery(smic, + "state = SMIC_WRITE_START, " + "status != SMIC_SC_SMS_WR_START"); + return SI_SM_CALL_WITH_DELAY; + } + /* + * we must not issue WR_(NEXT|END) unless + * TX_DATA_READY is set + * */ + if (flags & SMIC_TX_DATA_READY) { + if (smic->write_count == 1) { + /* last byte */ + write_smic_control(smic, SMIC_CC_SMS_WR_END); + smic->state = SMIC_WRITE_END; + } else { + write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); + smic->state = SMIC_WRITE_NEXT; + } + write_next_byte(smic); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + } else + return SI_SM_CALL_WITH_DELAY; + break; + + case SMIC_WRITE_NEXT: + if (status != SMIC_SC_SMS_WR_NEXT) { + start_error_recovery(smic, + "state = SMIC_WRITE_NEXT, " + "status != SMIC_SC_SMS_WR_NEXT"); + return SI_SM_CALL_WITH_DELAY; + } + /* this is the same code as in SMIC_WRITE_START */ + if (flags & SMIC_TX_DATA_READY) { + if (smic->write_count == 1) { + write_smic_control(smic, SMIC_CC_SMS_WR_END); + smic->state = SMIC_WRITE_END; + } else { + write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); + smic->state = SMIC_WRITE_NEXT; + } + write_next_byte(smic); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + } else + return SI_SM_CALL_WITH_DELAY; + break; + + case SMIC_WRITE_END: + if (status != SMIC_SC_SMS_WR_END) { + start_error_recovery(smic, + "state = SMIC_WRITE_END, " + "status != SMIC_SC_SMS_WR_END"); + return SI_SM_CALL_WITH_DELAY; + } + /* data register holds an error code */ + data = read_smic_data(smic); + if (data != 0) { + if (smic_debug & SMIC_DEBUG_ENABLE) + printk(KERN_DEBUG + "SMIC_WRITE_END: data = %02x\n", data); + start_error_recovery(smic, + "state = SMIC_WRITE_END, " + "data != SUCCESS"); + return SI_SM_CALL_WITH_DELAY; + } else + smic->state = SMIC_WRITE2READ; + break; + + case SMIC_WRITE2READ: + /* + * we must wait for RX_DATA_READY to be set before we + * can continue + */ + if (flags & SMIC_RX_DATA_READY) { + write_smic_control(smic, SMIC_CC_SMS_RD_START); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_READ_START; + } else + return SI_SM_CALL_WITH_DELAY; + break; + + case SMIC_READ_START: + if (status != SMIC_SC_SMS_RD_START) { + start_error_recovery(smic, + "state = SMIC_READ_START, " + "status != SMIC_SC_SMS_RD_START"); + return SI_SM_CALL_WITH_DELAY; + } + if (flags & SMIC_RX_DATA_READY) { + read_next_byte(smic); + write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_READ_NEXT; + } else + return SI_SM_CALL_WITH_DELAY; + break; + + case SMIC_READ_NEXT: + switch (status) { + /* + * smic tells us that this is the last byte to be read + * --> clean up + */ + case SMIC_SC_SMS_RD_END: + read_next_byte(smic); + write_smic_control(smic, SMIC_CC_SMS_RD_END); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_READ_END; + break; + case SMIC_SC_SMS_RD_NEXT: + if (flags & SMIC_RX_DATA_READY) { + read_next_byte(smic); + write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_READ_NEXT; + } else + return SI_SM_CALL_WITH_DELAY; + break; + default: + start_error_recovery( + smic, + "state = SMIC_READ_NEXT, " + "status != SMIC_SC_SMS_RD_(NEXT|END)"); + return SI_SM_CALL_WITH_DELAY; + } + break; + + case SMIC_READ_END: + if (status != SMIC_SC_SMS_READY) { + start_error_recovery(smic, + "state = SMIC_READ_END, " + "status != SMIC_SC_SMS_READY"); + return SI_SM_CALL_WITH_DELAY; + } + data = read_smic_data(smic); + /* data register holds an error code */ + if (data != 0) { + if (smic_debug & SMIC_DEBUG_ENABLE) + printk(KERN_DEBUG + "SMIC_READ_END: data = %02x\n", data); + start_error_recovery(smic, + "state = SMIC_READ_END, " + "data != SUCCESS"); + return SI_SM_CALL_WITH_DELAY; + } else { + smic->state = SMIC_IDLE; + return SI_SM_TRANSACTION_COMPLETE; + } + + case SMIC_HOSED: + init_smic_data(smic, smic->io); + return SI_SM_HOSED; + + default: + if (smic_debug & SMIC_DEBUG_ENABLE) { + printk(KERN_DEBUG "smic->state = %d\n", smic->state); + start_error_recovery(smic, "state = UNKNOWN"); + return SI_SM_CALL_WITH_DELAY; + } + } + smic->smic_timeout = SMIC_RETRY_TIMEOUT; + return SI_SM_CALL_WITHOUT_DELAY; +} + +static int smic_detect(struct si_sm_data *smic) +{ + /* + * It's impossible for the SMIC fnags register to be all 1's, + * (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. + */ + if (read_smic_flags(smic) == 0xff) + return 1; + + return 0; +} + +static void smic_cleanup(struct si_sm_data *kcs) +{ +} + +static int smic_size(void) +{ + return sizeof(struct si_sm_data); +} + +struct si_sm_handlers smic_smi_handlers = { + .init_data = init_smic_data, + .start_transaction = start_smic_transaction, + .get_result = smic_get_result, + .event = smic_event, + .detect = smic_detect, + .cleanup = smic_cleanup, + .size = smic_size, +}; diff --git a/kernel/drivers/char/ipmi/ipmi_ssif.c b/kernel/drivers/char/ipmi/ipmi_ssif.c new file mode 100644 index 000000000..207689c44 --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_ssif.c @@ -0,0 +1,2017 @@ +/* + * ipmi_ssif.c + * + * The interface to the IPMI driver for SMBus access to a SMBus + * compliant device. Called SSIF by the IPMI spec. + * + * Author: Intel Corporation + * Todd Davis <todd.c.davis@intel.com> + * + * Rewritten by Corey Minyard <minyard@acm.org> to support the + * non-blocking I2C interface, add support for multi-part + * transactions, add PEC support, and general clenaup. + * + * Copyright 2003 Intel Corporation + * Copyright 2005 MontaVista Software + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/* + * This file holds the "policy" for the interface to the SSIF state + * machine. It does the configuration, handles timers and interrupts, + * and drives the real SSIF state machine. + */ + +/* + * TODO: Figure out how to use SMB alerts. This will require a new + * interface into the I2C driver, I believe. + */ + +#if defined(MODVERSIONS) +#include <linux/modversions.h> +#endif + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/i2c.h> +#include <linux/ipmi_smi.h> +#include <linux/init.h> +#include <linux/dmi.h> +#include <linux/kthread.h> +#include <linux/acpi.h> +#include <linux/ctype.h> + +#define PFX "ipmi_ssif: " +#define DEVICE_NAME "ipmi_ssif" + +#define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD 0x57 + +#define SSIF_IPMI_REQUEST 2 +#define SSIF_IPMI_MULTI_PART_REQUEST_START 6 +#define SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE 7 +#define SSIF_IPMI_RESPONSE 3 +#define SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE 9 + +/* ssif_debug is a bit-field + * SSIF_DEBUG_MSG - commands and their responses + * SSIF_DEBUG_STATES - message states + * SSIF_DEBUG_TIMING - Measure times between events in the driver + */ +#define SSIF_DEBUG_TIMING 4 +#define SSIF_DEBUG_STATE 2 +#define SSIF_DEBUG_MSG 1 +#define SSIF_NODEBUG 0 +#define SSIF_DEFAULT_DEBUG (SSIF_NODEBUG) + +/* + * Timer values + */ +#define SSIF_MSG_USEC 20000 /* 20ms between message tries. */ +#define SSIF_MSG_PART_USEC 5000 /* 5ms for a message part */ + +/* How many times to we retry sending/receiving the message. */ +#define SSIF_SEND_RETRIES 5 +#define SSIF_RECV_RETRIES 250 + +#define SSIF_MSG_MSEC (SSIF_MSG_USEC / 1000) +#define SSIF_MSG_JIFFIES ((SSIF_MSG_USEC * 1000) / TICK_NSEC) +#define SSIF_MSG_PART_JIFFIES ((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC) + +enum ssif_intf_state { + SSIF_NORMAL, + SSIF_GETTING_FLAGS, + SSIF_GETTING_EVENTS, + SSIF_CLEARING_FLAGS, + SSIF_GETTING_MESSAGES, + /* FIXME - add watchdog stuff. */ +}; + +#define SSIF_IDLE(ssif) ((ssif)->ssif_state == SSIF_NORMAL \ + && (ssif)->curr_msg == NULL) + +/* + * Indexes into stats[] in ssif_info below. + */ +enum ssif_stat_indexes { + /* Number of total messages sent. */ + SSIF_STAT_sent_messages = 0, + + /* + * Number of message parts sent. Messages may be broken into + * parts if they are long. + */ + SSIF_STAT_sent_messages_parts, + + /* + * Number of time a message was retried. + */ + SSIF_STAT_send_retries, + + /* + * Number of times the send of a message failed. + */ + SSIF_STAT_send_errors, + + /* + * Number of message responses received. + */ + SSIF_STAT_received_messages, + + /* + * Number of message fragments received. + */ + SSIF_STAT_received_message_parts, + + /* + * Number of times the receive of a message was retried. + */ + SSIF_STAT_receive_retries, + + /* + * Number of errors receiving messages. + */ + SSIF_STAT_receive_errors, + + /* + * Number of times a flag fetch was requested. + */ + SSIF_STAT_flag_fetches, + + /* + * Number of times the hardware didn't follow the state machine. + */ + SSIF_STAT_hosed, + + /* + * Number of received events. + */ + SSIF_STAT_events, + + /* Number of asyncronous messages received. */ + SSIF_STAT_incoming_messages, + + /* Number of watchdog pretimeouts. */ + SSIF_STAT_watchdog_pretimeouts, + + /* Number of alers received. */ + SSIF_STAT_alerts, + + /* Always add statistics before this value, it must be last. */ + SSIF_NUM_STATS +}; + +struct ssif_addr_info { + unsigned short addr; + struct i2c_board_info binfo; + char *adapter_name; + int debug; + int slave_addr; + enum ipmi_addr_src addr_src; + union ipmi_smi_info_union addr_info; + + struct mutex clients_mutex; + struct list_head clients; + + struct list_head link; +}; + +struct ssif_info; + +typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result, + unsigned char *data, unsigned int len); + +struct ssif_info { + ipmi_smi_t intf; + int intf_num; + spinlock_t lock; + struct ipmi_smi_msg *waiting_msg; + struct ipmi_smi_msg *curr_msg; + enum ssif_intf_state ssif_state; + unsigned long ssif_debug; + + struct ipmi_smi_handlers handlers; + + enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */ + union ipmi_smi_info_union addr_info; + + /* + * Flags from the last GET_MSG_FLAGS command, used when an ATTN + * is set to hold the flags until we are done handling everything + * from the flags. + */ +#define RECEIVE_MSG_AVAIL 0x01 +#define EVENT_MSG_BUFFER_FULL 0x02 +#define WDT_PRE_TIMEOUT_INT 0x08 + unsigned char msg_flags; + + u8 global_enables; + bool has_event_buffer; + bool supports_alert; + + /* + * Used to tell what we should do with alerts. If we are + * waiting on a response, read the data immediately. + */ + bool got_alert; + bool waiting_alert; + + /* + * If set to true, this will request events the next time the + * state machine is idle. + */ + bool req_events; + + /* + * If set to true, this will request flags the next time the + * state machine is idle. + */ + bool req_flags; + + /* + * Used to perform timer operations when run-to-completion + * mode is on. This is a countdown timer. + */ + int rtc_us_timer; + + /* Used for sending/receiving data. +1 for the length. */ + unsigned char data[IPMI_MAX_MSG_LENGTH + 1]; + unsigned int data_len; + + /* Temp receive buffer, gets copied into data. */ + unsigned char recv[I2C_SMBUS_BLOCK_MAX]; + + struct i2c_client *client; + ssif_i2c_done done_handler; + + /* Thread interface handling */ + struct task_struct *thread; + struct completion wake_thread; + bool stopping; + int i2c_read_write; + int i2c_command; + unsigned char *i2c_data; + unsigned int i2c_size; + + /* From the device id response. */ + struct ipmi_device_id device_id; + + struct timer_list retry_timer; + int retries_left; + + /* Info from SSIF cmd */ + unsigned char max_xmit_msg_size; + unsigned char max_recv_msg_size; + unsigned int multi_support; + int supports_pec; + +#define SSIF_NO_MULTI 0 +#define SSIF_MULTI_2_PART 1 +#define SSIF_MULTI_n_PART 2 + unsigned char *multi_data; + unsigned int multi_len; + unsigned int multi_pos; + + atomic_t stats[SSIF_NUM_STATS]; +}; + +#define ssif_inc_stat(ssif, stat) \ + atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat]) +#define ssif_get_stat(ssif, stat) \ + ((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat])) + +static bool initialized; + +static atomic_t next_intf = ATOMIC_INIT(0); + +static void return_hosed_msg(struct ssif_info *ssif_info, + struct ipmi_smi_msg *msg); +static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags); +static int start_send(struct ssif_info *ssif_info, + unsigned char *data, + unsigned int len); + +static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info, + unsigned long *flags) +{ + spin_lock_irqsave(&ssif_info->lock, *flags); + return flags; +} + +static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info, + unsigned long *flags) +{ + spin_unlock_irqrestore(&ssif_info->lock, *flags); +} + +static void deliver_recv_msg(struct ssif_info *ssif_info, + struct ipmi_smi_msg *msg) +{ + ipmi_smi_t intf = ssif_info->intf; + + if (!intf) { + ipmi_free_smi_msg(msg); + } else if (msg->rsp_size < 0) { + return_hosed_msg(ssif_info, msg); + pr_err(PFX + "Malformed message in deliver_recv_msg: rsp_size = %d\n", + msg->rsp_size); + } else { + ipmi_smi_msg_received(intf, msg); + } +} + +static void return_hosed_msg(struct ssif_info *ssif_info, + struct ipmi_smi_msg *msg) +{ + ssif_inc_stat(ssif_info, hosed); + + /* Make it a response */ + msg->rsp[0] = msg->data[0] | 4; + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = 0xFF; /* Unknown error. */ + msg->rsp_size = 3; + + deliver_recv_msg(ssif_info, msg); +} + +/* + * Must be called with the message lock held. This will release the + * message lock. Note that the caller will check SSIF_IDLE and start a + * new operation, so there is no need to check for new messages to + * start in here. + */ +static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags) +{ + unsigned char msg[3]; + + ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; + ssif_info->ssif_state = SSIF_CLEARING_FLAGS; + ipmi_ssif_unlock_cond(ssif_info, flags); + + /* Make sure the watchdog pre-timeout flag is not set at startup. */ + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; + msg[2] = WDT_PRE_TIMEOUT_INT; + + if (start_send(ssif_info, msg, 3) != 0) { + /* Error, just go to normal state. */ + ssif_info->ssif_state = SSIF_NORMAL; + } +} + +static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags) +{ + unsigned char mb[2]; + + ssif_info->req_flags = false; + ssif_info->ssif_state = SSIF_GETTING_FLAGS; + ipmi_ssif_unlock_cond(ssif_info, flags); + + mb[0] = (IPMI_NETFN_APP_REQUEST << 2); + mb[1] = IPMI_GET_MSG_FLAGS_CMD; + if (start_send(ssif_info, mb, 2) != 0) + ssif_info->ssif_state = SSIF_NORMAL; +} + +static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags, + struct ipmi_smi_msg *msg) +{ + if (start_send(ssif_info, msg->data, msg->data_size) != 0) { + unsigned long oflags; + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + ssif_info->curr_msg = NULL; + ssif_info->ssif_state = SSIF_NORMAL; + ipmi_ssif_unlock_cond(ssif_info, flags); + ipmi_free_smi_msg(msg); + } +} + +static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags) +{ + struct ipmi_smi_msg *msg; + + ssif_info->req_events = false; + + msg = ipmi_alloc_smi_msg(); + if (!msg) { + ssif_info->ssif_state = SSIF_NORMAL; + return; + } + + ssif_info->curr_msg = msg; + ssif_info->ssif_state = SSIF_GETTING_EVENTS; + ipmi_ssif_unlock_cond(ssif_info, flags); + + msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD; + msg->data_size = 2; + + check_start_send(ssif_info, flags, msg); +} + +static void start_recv_msg_fetch(struct ssif_info *ssif_info, + unsigned long *flags) +{ + struct ipmi_smi_msg *msg; + + msg = ipmi_alloc_smi_msg(); + if (!msg) { + ssif_info->ssif_state = SSIF_NORMAL; + return; + } + + ssif_info->curr_msg = msg; + ssif_info->ssif_state = SSIF_GETTING_MESSAGES; + ipmi_ssif_unlock_cond(ssif_info, flags); + + msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg->data[1] = IPMI_GET_MSG_CMD; + msg->data_size = 2; + + check_start_send(ssif_info, flags, msg); +} + +/* + * Must be called with the message lock held. This will release the + * message lock. Note that the caller will check SSIF_IDLE and start a + * new operation, so there is no need to check for new messages to + * start in here. + */ +static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags) +{ + if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) { + ipmi_smi_t intf = ssif_info->intf; + /* Watchdog pre-timeout */ + ssif_inc_stat(ssif_info, watchdog_pretimeouts); + start_clear_flags(ssif_info, flags); + if (intf) + ipmi_smi_watchdog_pretimeout(intf); + } else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL) + /* Messages available. */ + start_recv_msg_fetch(ssif_info, flags); + else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL) + /* Events available. */ + start_event_fetch(ssif_info, flags); + else { + ssif_info->ssif_state = SSIF_NORMAL; + ipmi_ssif_unlock_cond(ssif_info, flags); + } +} + +static int ipmi_ssif_thread(void *data) +{ + struct ssif_info *ssif_info = data; + + while (!kthread_should_stop()) { + int result; + + /* Wait for something to do */ + result = wait_for_completion_interruptible( + &ssif_info->wake_thread); + if (ssif_info->stopping) + break; + if (result == -ERESTARTSYS) + continue; + init_completion(&ssif_info->wake_thread); + + if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) { + result = i2c_smbus_write_block_data( + ssif_info->client, ssif_info->i2c_command, + ssif_info->i2c_data[0], + ssif_info->i2c_data + 1); + ssif_info->done_handler(ssif_info, result, NULL, 0); + } else { + result = i2c_smbus_read_block_data( + ssif_info->client, ssif_info->i2c_command, + ssif_info->i2c_data); + if (result < 0) + ssif_info->done_handler(ssif_info, result, + NULL, 0); + else + ssif_info->done_handler(ssif_info, 0, + ssif_info->i2c_data, + result); + } + } + + return 0; +} + +static int ssif_i2c_send(struct ssif_info *ssif_info, + ssif_i2c_done handler, + int read_write, int command, + unsigned char *data, unsigned int size) +{ + ssif_info->done_handler = handler; + + ssif_info->i2c_read_write = read_write; + ssif_info->i2c_command = command; + ssif_info->i2c_data = data; + ssif_info->i2c_size = size; + complete(&ssif_info->wake_thread); + return 0; +} + + +static void msg_done_handler(struct ssif_info *ssif_info, int result, + unsigned char *data, unsigned int len); + +static void start_get(struct ssif_info *ssif_info) +{ + int rv; + + ssif_info->rtc_us_timer = 0; + ssif_info->multi_pos = 0; + + rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, + SSIF_IPMI_RESPONSE, + ssif_info->recv, I2C_SMBUS_BLOCK_DATA); + if (rv < 0) { + /* request failed, just return the error. */ + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info("Error from i2c_non_blocking_op(5)\n"); + + msg_done_handler(ssif_info, -EIO, NULL, 0); + } +} + +static void retry_timeout(unsigned long data) +{ + struct ssif_info *ssif_info = (void *) data; + unsigned long oflags, *flags; + bool waiting; + + if (ssif_info->stopping) + return; + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + waiting = ssif_info->waiting_alert; + ssif_info->waiting_alert = false; + ipmi_ssif_unlock_cond(ssif_info, flags); + + if (waiting) + start_get(ssif_info); +} + + +static void ssif_alert(struct i2c_client *client, unsigned int data) +{ + struct ssif_info *ssif_info = i2c_get_clientdata(client); + unsigned long oflags, *flags; + bool do_get = false; + + ssif_inc_stat(ssif_info, alerts); + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + if (ssif_info->waiting_alert) { + ssif_info->waiting_alert = false; + del_timer(&ssif_info->retry_timer); + do_get = true; + } else if (ssif_info->curr_msg) { + ssif_info->got_alert = true; + } + ipmi_ssif_unlock_cond(ssif_info, flags); + if (do_get) + start_get(ssif_info); +} + +static int start_resend(struct ssif_info *ssif_info); + +static void msg_done_handler(struct ssif_info *ssif_info, int result, + unsigned char *data, unsigned int len) +{ + struct ipmi_smi_msg *msg; + unsigned long oflags, *flags; + int rv; + + /* + * We are single-threaded here, so no need for a lock until we + * start messing with driver states or the queues. + */ + + if (result < 0) { + ssif_info->retries_left--; + if (ssif_info->retries_left > 0) { + ssif_inc_stat(ssif_info, receive_retries); + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + ssif_info->waiting_alert = true; + ssif_info->rtc_us_timer = SSIF_MSG_USEC; + mod_timer(&ssif_info->retry_timer, + jiffies + SSIF_MSG_JIFFIES); + ipmi_ssif_unlock_cond(ssif_info, flags); + return; + } + + ssif_inc_stat(ssif_info, receive_errors); + + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info("Error in msg_done_handler: %d\n", result); + len = 0; + goto continue_op; + } + + if ((len > 1) && (ssif_info->multi_pos == 0) + && (data[0] == 0x00) && (data[1] == 0x01)) { + /* Start of multi-part read. Start the next transaction. */ + int i; + + ssif_inc_stat(ssif_info, received_message_parts); + + /* Remove the multi-part read marker. */ + len -= 2; + for (i = 0; i < len; i++) + ssif_info->data[i] = data[i+2]; + ssif_info->multi_len = len; + ssif_info->multi_pos = 1; + + rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, + SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, + ssif_info->recv, I2C_SMBUS_BLOCK_DATA); + if (rv < 0) { + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info("Error from i2c_non_blocking_op(1)\n"); + + result = -EIO; + } else + return; + } else if (ssif_info->multi_pos) { + /* Middle of multi-part read. Start the next transaction. */ + int i; + unsigned char blocknum; + + if (len == 0) { + result = -EIO; + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info(PFX "Middle message with no data\n"); + + goto continue_op; + } + + blocknum = data[0]; + + if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) { + /* Received message too big, abort the operation. */ + result = -E2BIG; + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info("Received message too big\n"); + + goto continue_op; + } + + /* Remove the blocknum from the data. */ + len--; + for (i = 0; i < len; i++) + ssif_info->data[i + ssif_info->multi_len] = data[i + 1]; + ssif_info->multi_len += len; + if (blocknum == 0xff) { + /* End of read */ + len = ssif_info->multi_len; + data = ssif_info->data; + } else if (blocknum + 1 != ssif_info->multi_pos) { + /* + * Out of sequence block, just abort. Block + * numbers start at zero for the second block, + * but multi_pos starts at one, so the +1. + */ + result = -EIO; + } else { + ssif_inc_stat(ssif_info, received_message_parts); + + ssif_info->multi_pos++; + + rv = ssif_i2c_send(ssif_info, msg_done_handler, + I2C_SMBUS_READ, + SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, + ssif_info->recv, + I2C_SMBUS_BLOCK_DATA); + if (rv < 0) { + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info(PFX + "Error from ssif_i2c_send\n"); + + result = -EIO; + } else + return; + } + } + + if (result < 0) { + ssif_inc_stat(ssif_info, receive_errors); + } else { + ssif_inc_stat(ssif_info, received_messages); + ssif_inc_stat(ssif_info, received_message_parts); + } + + + continue_op: + if (ssif_info->ssif_debug & SSIF_DEBUG_STATE) + pr_info(PFX "DONE 1: state = %d, result=%d.\n", + ssif_info->ssif_state, result); + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + msg = ssif_info->curr_msg; + if (msg) { + msg->rsp_size = len; + if (msg->rsp_size > IPMI_MAX_MSG_LENGTH) + msg->rsp_size = IPMI_MAX_MSG_LENGTH; + memcpy(msg->rsp, data, msg->rsp_size); + ssif_info->curr_msg = NULL; + } + + switch (ssif_info->ssif_state) { + case SSIF_NORMAL: + ipmi_ssif_unlock_cond(ssif_info, flags); + if (!msg) + break; + + if (result < 0) + return_hosed_msg(ssif_info, msg); + else + deliver_recv_msg(ssif_info, msg); + break; + + case SSIF_GETTING_FLAGS: + /* We got the flags from the SSIF, now handle them. */ + if ((result < 0) || (len < 4) || (data[2] != 0)) { + /* + * Error fetching flags, or invalid length, + * just give up for now. + */ + ssif_info->ssif_state = SSIF_NORMAL; + ipmi_ssif_unlock_cond(ssif_info, flags); + pr_warn(PFX "Error getting flags: %d %d, %x\n", + result, len, data[2]); + } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 + || data[1] != IPMI_GET_MSG_FLAGS_CMD) { + pr_warn(PFX "Invalid response getting flags: %x %x\n", + data[0], data[1]); + } else { + ssif_inc_stat(ssif_info, flag_fetches); + ssif_info->msg_flags = data[3]; + handle_flags(ssif_info, flags); + } + break; + + case SSIF_CLEARING_FLAGS: + /* We cleared the flags. */ + if ((result < 0) || (len < 3) || (data[2] != 0)) { + /* Error clearing flags */ + pr_warn(PFX "Error clearing flags: %d %d, %x\n", + result, len, data[2]); + } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 + || data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) { + pr_warn(PFX "Invalid response clearing flags: %x %x\n", + data[0], data[1]); + } + ssif_info->ssif_state = SSIF_NORMAL; + ipmi_ssif_unlock_cond(ssif_info, flags); + break; + + case SSIF_GETTING_EVENTS: + if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { + /* Error getting event, probably done. */ + msg->done(msg); + + /* Take off the event flag. */ + ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; + handle_flags(ssif_info, flags); + } else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 + || msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) { + pr_warn(PFX "Invalid response getting events: %x %x\n", + msg->rsp[0], msg->rsp[1]); + msg->done(msg); + /* Take off the event flag. */ + ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; + handle_flags(ssif_info, flags); + } else { + handle_flags(ssif_info, flags); + ssif_inc_stat(ssif_info, events); + deliver_recv_msg(ssif_info, msg); + } + break; + + case SSIF_GETTING_MESSAGES: + if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { + /* Error getting event, probably done. */ + msg->done(msg); + + /* Take off the msg flag. */ + ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL; + handle_flags(ssif_info, flags); + } else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 + || msg->rsp[1] != IPMI_GET_MSG_CMD) { + pr_warn(PFX "Invalid response clearing flags: %x %x\n", + msg->rsp[0], msg->rsp[1]); + msg->done(msg); + + /* Take off the msg flag. */ + ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL; + handle_flags(ssif_info, flags); + } else { + ssif_inc_stat(ssif_info, incoming_messages); + handle_flags(ssif_info, flags); + deliver_recv_msg(ssif_info, msg); + } + break; + } + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) { + if (ssif_info->req_events) + start_event_fetch(ssif_info, flags); + else if (ssif_info->req_flags) + start_flag_fetch(ssif_info, flags); + else + start_next_msg(ssif_info, flags); + } else + ipmi_ssif_unlock_cond(ssif_info, flags); + + if (ssif_info->ssif_debug & SSIF_DEBUG_STATE) + pr_info(PFX "DONE 2: state = %d.\n", ssif_info->ssif_state); +} + +static void msg_written_handler(struct ssif_info *ssif_info, int result, + unsigned char *data, unsigned int len) +{ + int rv; + + /* We are single-threaded here, so no need for a lock. */ + if (result < 0) { + ssif_info->retries_left--; + if (ssif_info->retries_left > 0) { + if (!start_resend(ssif_info)) { + ssif_inc_stat(ssif_info, send_retries); + return; + } + /* request failed, just return the error. */ + ssif_inc_stat(ssif_info, send_errors); + + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info(PFX + "Out of retries in msg_written_handler\n"); + msg_done_handler(ssif_info, -EIO, NULL, 0); + return; + } + + ssif_inc_stat(ssif_info, send_errors); + + /* + * Got an error on transmit, let the done routine + * handle it. + */ + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info("Error in msg_written_handler: %d\n", result); + + msg_done_handler(ssif_info, result, NULL, 0); + return; + } + + if (ssif_info->multi_data) { + /* + * In the middle of a multi-data write. See the comment + * in the SSIF_MULTI_n_PART case in the probe function + * for details on the intricacies of this. + */ + int left; + + ssif_inc_stat(ssif_info, sent_messages_parts); + + left = ssif_info->multi_len - ssif_info->multi_pos; + if (left > 32) + left = 32; + /* Length byte. */ + ssif_info->multi_data[ssif_info->multi_pos] = left; + ssif_info->multi_pos += left; + if (left < 32) + /* + * Write is finished. Note that we must end + * with a write of less than 32 bytes to + * complete the transaction, even if it is + * zero bytes. + */ + ssif_info->multi_data = NULL; + + rv = ssif_i2c_send(ssif_info, msg_written_handler, + I2C_SMBUS_WRITE, + SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE, + ssif_info->multi_data + ssif_info->multi_pos, + I2C_SMBUS_BLOCK_DATA); + if (rv < 0) { + /* request failed, just return the error. */ + ssif_inc_stat(ssif_info, send_errors); + + if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) + pr_info("Error from i2c_non_blocking_op(3)\n"); + msg_done_handler(ssif_info, -EIO, NULL, 0); + } + } else { + unsigned long oflags, *flags; + bool got_alert; + + ssif_inc_stat(ssif_info, sent_messages); + ssif_inc_stat(ssif_info, sent_messages_parts); + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + got_alert = ssif_info->got_alert; + if (got_alert) { + ssif_info->got_alert = false; + ssif_info->waiting_alert = false; + } + + if (got_alert) { + ipmi_ssif_unlock_cond(ssif_info, flags); + /* The alert already happened, try now. */ + retry_timeout((unsigned long) ssif_info); + } else { + /* Wait a jiffie then request the next message */ + ssif_info->waiting_alert = true; + ssif_info->retries_left = SSIF_RECV_RETRIES; + ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC; + mod_timer(&ssif_info->retry_timer, + jiffies + SSIF_MSG_PART_JIFFIES); + ipmi_ssif_unlock_cond(ssif_info, flags); + } + } +} + +static int start_resend(struct ssif_info *ssif_info) +{ + int rv; + int command; + + ssif_info->got_alert = false; + + if (ssif_info->data_len > 32) { + command = SSIF_IPMI_MULTI_PART_REQUEST_START; + ssif_info->multi_data = ssif_info->data; + ssif_info->multi_len = ssif_info->data_len; + /* + * Subtle thing, this is 32, not 33, because we will + * overwrite the thing at position 32 (which was just + * transmitted) with the new length. + */ + ssif_info->multi_pos = 32; + ssif_info->data[0] = 32; + } else { + ssif_info->multi_data = NULL; + command = SSIF_IPMI_REQUEST; + ssif_info->data[0] = ssif_info->data_len; + } + + rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE, + command, ssif_info->data, I2C_SMBUS_BLOCK_DATA); + if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG)) + pr_info("Error from i2c_non_blocking_op(4)\n"); + return rv; +} + +static int start_send(struct ssif_info *ssif_info, + unsigned char *data, + unsigned int len) +{ + if (len > IPMI_MAX_MSG_LENGTH) + return -E2BIG; + if (len > ssif_info->max_xmit_msg_size) + return -E2BIG; + + ssif_info->retries_left = SSIF_SEND_RETRIES; + memcpy(ssif_info->data + 1, data, len); + ssif_info->data_len = len; + return start_resend(ssif_info); +} + +/* Must be called with the message lock held. */ +static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags) +{ + struct ipmi_smi_msg *msg; + unsigned long oflags; + + restart: + if (!SSIF_IDLE(ssif_info)) { + ipmi_ssif_unlock_cond(ssif_info, flags); + return; + } + + if (!ssif_info->waiting_msg) { + ssif_info->curr_msg = NULL; + ipmi_ssif_unlock_cond(ssif_info, flags); + } else { + int rv; + + ssif_info->curr_msg = ssif_info->waiting_msg; + ssif_info->waiting_msg = NULL; + ipmi_ssif_unlock_cond(ssif_info, flags); + rv = start_send(ssif_info, + ssif_info->curr_msg->data, + ssif_info->curr_msg->data_size); + if (rv) { + msg = ssif_info->curr_msg; + ssif_info->curr_msg = NULL; + return_hosed_msg(ssif_info, msg); + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + goto restart; + } + } +} + +static void sender(void *send_info, + struct ipmi_smi_msg *msg) +{ + struct ssif_info *ssif_info = (struct ssif_info *) send_info; + unsigned long oflags, *flags; + + BUG_ON(ssif_info->waiting_msg); + ssif_info->waiting_msg = msg; + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + start_next_msg(ssif_info, flags); + + if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) { + struct timeval t; + + do_gettimeofday(&t); + pr_info("**Enqueue %02x %02x: %ld.%6.6ld\n", + msg->data[0], msg->data[1], + (long) t.tv_sec, (long) t.tv_usec); + } +} + +static int get_smi_info(void *send_info, struct ipmi_smi_info *data) +{ + struct ssif_info *ssif_info = send_info; + + data->addr_src = ssif_info->addr_source; + data->dev = &ssif_info->client->dev; + data->addr_info = ssif_info->addr_info; + get_device(data->dev); + + return 0; +} + +/* + * Instead of having our own timer to periodically check the message + * flags, we let the message handler drive us. + */ +static void request_events(void *send_info) +{ + struct ssif_info *ssif_info = (struct ssif_info *) send_info; + unsigned long oflags, *flags; + + if (!ssif_info->has_event_buffer) + return; + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + /* + * Request flags first, not events, because the lower layer + * doesn't have a way to send an attention. But make sure + * event checking still happens. + */ + ssif_info->req_events = true; + if (SSIF_IDLE(ssif_info)) + start_flag_fetch(ssif_info, flags); + else { + ssif_info->req_flags = true; + ipmi_ssif_unlock_cond(ssif_info, flags); + } +} + +static int inc_usecount(void *send_info) +{ + struct ssif_info *ssif_info = send_info; + + if (!i2c_get_adapter(ssif_info->client->adapter->nr)) + return -ENODEV; + + i2c_use_client(ssif_info->client); + return 0; +} + +static void dec_usecount(void *send_info) +{ + struct ssif_info *ssif_info = send_info; + + i2c_release_client(ssif_info->client); + i2c_put_adapter(ssif_info->client->adapter); +} + +static int ssif_start_processing(void *send_info, + ipmi_smi_t intf) +{ + struct ssif_info *ssif_info = send_info; + + ssif_info->intf = intf; + + return 0; +} + +#define MAX_SSIF_BMCS 4 + +static unsigned short addr[MAX_SSIF_BMCS]; +static int num_addrs; +module_param_array(addr, ushort, &num_addrs, 0); +MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs."); + +static char *adapter_name[MAX_SSIF_BMCS]; +static int num_adapter_names; +module_param_array(adapter_name, charp, &num_adapter_names, 0); +MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC. By default all devices are scanned."); + +static int slave_addrs[MAX_SSIF_BMCS]; +static int num_slave_addrs; +module_param_array(slave_addrs, int, &num_slave_addrs, 0); +MODULE_PARM_DESC(slave_addrs, + "The default IPMB slave address for the controller."); + +/* + * Bit 0 enables message debugging, bit 1 enables state debugging, and + * bit 2 enables timing debugging. This is an array indexed by + * interface number" + */ +static int dbg[MAX_SSIF_BMCS]; +static int num_dbg; +module_param_array(dbg, int, &num_dbg, 0); +MODULE_PARM_DESC(dbg, "Turn on debugging."); + +static bool ssif_dbg_probe; +module_param_named(dbg_probe, ssif_dbg_probe, bool, 0); +MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters."); + +static int use_thread; +module_param(use_thread, int, 0); +MODULE_PARM_DESC(use_thread, "Use the thread interface."); + +static bool ssif_tryacpi = 1; +module_param_named(tryacpi, ssif_tryacpi, bool, 0); +MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI"); + +static bool ssif_trydmi = 1; +module_param_named(trydmi, ssif_trydmi, bool, 0); +MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)"); + +static DEFINE_MUTEX(ssif_infos_mutex); +static LIST_HEAD(ssif_infos); + +static int ssif_remove(struct i2c_client *client) +{ + struct ssif_info *ssif_info = i2c_get_clientdata(client); + int rv; + + if (!ssif_info) + return 0; + + /* + * After this point, we won't deliver anything asychronously + * to the message handler. We can unregister ourself. + */ + rv = ipmi_unregister_smi(ssif_info->intf); + if (rv) { + pr_err(PFX "Unable to unregister device: errno=%d\n", rv); + return rv; + } + ssif_info->intf = NULL; + + /* make sure the driver is not looking for flags any more. */ + while (ssif_info->ssif_state != SSIF_NORMAL) + schedule_timeout(1); + + ssif_info->stopping = true; + del_timer_sync(&ssif_info->retry_timer); + if (ssif_info->thread) { + complete(&ssif_info->wake_thread); + kthread_stop(ssif_info->thread); + } + + /* + * No message can be outstanding now, we have removed the + * upper layer and it permitted us to do so. + */ + kfree(ssif_info); + return 0; +} + +static int do_cmd(struct i2c_client *client, int len, unsigned char *msg, + int *resp_len, unsigned char *resp) +{ + int retry_cnt; + int ret; + + retry_cnt = SSIF_SEND_RETRIES; + retry1: + ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg); + if (ret) { + retry_cnt--; + if (retry_cnt > 0) + goto retry1; + return -ENODEV; + } + + ret = -ENODEV; + retry_cnt = SSIF_RECV_RETRIES; + while (retry_cnt > 0) { + ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE, + resp); + if (ret > 0) + break; + msleep(SSIF_MSG_MSEC); + retry_cnt--; + if (retry_cnt <= 0) + break; + } + + if (ret > 0) { + /* Validate that the response is correct. */ + if (ret < 3 || + (resp[0] != (msg[0] | (1 << 2))) || + (resp[1] != msg[1])) + ret = -EINVAL; + else { + *resp_len = ret; + ret = 0; + } + } + + return ret; +} + +static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + unsigned char *resp; + unsigned char msg[3]; + int rv; + int len; + + resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + /* Do a Get Device ID command, since it is required. */ + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_DEVICE_ID_CMD; + rv = do_cmd(client, 2, msg, &len, resp); + if (rv) + rv = -ENODEV; + else + strlcpy(info->type, DEVICE_NAME, I2C_NAME_SIZE); + kfree(resp); + return rv; +} + +static int smi_type_proc_show(struct seq_file *m, void *v) +{ + seq_puts(m, "ssif\n"); + + return 0; +} + +static int smi_type_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, smi_type_proc_show, inode->i_private); +} + +static const struct file_operations smi_type_proc_ops = { + .open = smi_type_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smi_stats_proc_show(struct seq_file *m, void *v) +{ + struct ssif_info *ssif_info = m->private; + + seq_printf(m, "sent_messages: %u\n", + ssif_get_stat(ssif_info, sent_messages)); + seq_printf(m, "sent_messages_parts: %u\n", + ssif_get_stat(ssif_info, sent_messages_parts)); + seq_printf(m, "send_retries: %u\n", + ssif_get_stat(ssif_info, send_retries)); + seq_printf(m, "send_errors: %u\n", + ssif_get_stat(ssif_info, send_errors)); + seq_printf(m, "received_messages: %u\n", + ssif_get_stat(ssif_info, received_messages)); + seq_printf(m, "received_message_parts: %u\n", + ssif_get_stat(ssif_info, received_message_parts)); + seq_printf(m, "receive_retries: %u\n", + ssif_get_stat(ssif_info, receive_retries)); + seq_printf(m, "receive_errors: %u\n", + ssif_get_stat(ssif_info, receive_errors)); + seq_printf(m, "flag_fetches: %u\n", + ssif_get_stat(ssif_info, flag_fetches)); + seq_printf(m, "hosed: %u\n", + ssif_get_stat(ssif_info, hosed)); + seq_printf(m, "events: %u\n", + ssif_get_stat(ssif_info, events)); + seq_printf(m, "watchdog_pretimeouts: %u\n", + ssif_get_stat(ssif_info, watchdog_pretimeouts)); + seq_printf(m, "alerts: %u\n", + ssif_get_stat(ssif_info, alerts)); + return 0; +} + +static int smi_stats_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, smi_stats_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations smi_stats_proc_ops = { + .open = smi_stats_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int strcmp_nospace(char *s1, char *s2) +{ + while (*s1 && *s2) { + while (isspace(*s1)) + s1++; + while (isspace(*s2)) + s2++; + if (*s1 > *s2) + return 1; + if (*s1 < *s2) + return -1; + s1++; + s2++; + } + return 0; +} + +static struct ssif_addr_info *ssif_info_find(unsigned short addr, + char *adapter_name, + bool match_null_name) +{ + struct ssif_addr_info *info, *found = NULL; + +restart: + list_for_each_entry(info, &ssif_infos, link) { + if (info->binfo.addr == addr) { + if (info->adapter_name || adapter_name) { + if (!info->adapter_name != !adapter_name) { + /* One is NULL and one is not */ + continue; + } + if (adapter_name && + strcmp_nospace(info->adapter_name, + adapter_name)) + /* Names do not match */ + continue; + } + found = info; + break; + } + } + + if (!found && match_null_name) { + /* Try to get an exact match first, then try with a NULL name */ + adapter_name = NULL; + match_null_name = false; + goto restart; + } + + return found; +} + +static bool check_acpi(struct ssif_info *ssif_info, struct device *dev) +{ +#ifdef CONFIG_ACPI + acpi_handle acpi_handle; + + acpi_handle = ACPI_HANDLE(dev); + if (acpi_handle) { + ssif_info->addr_source = SI_ACPI; + ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle; + return true; + } +#endif + return false; +} + +/* + * Global enables we care about. + */ +#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \ + IPMI_BMC_EVT_MSG_INTR) + +static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + unsigned char msg[3]; + unsigned char *resp; + struct ssif_info *ssif_info; + int rv = 0; + int len; + int i; + u8 slave_addr = 0; + struct ssif_addr_info *addr_info = NULL; + + + resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL); + if (!ssif_info) { + kfree(resp); + return -ENOMEM; + } + + if (!check_acpi(ssif_info, &client->dev)) { + addr_info = ssif_info_find(client->addr, client->adapter->name, + true); + if (!addr_info) { + /* Must have come in through sysfs. */ + ssif_info->addr_source = SI_HOTMOD; + } else { + ssif_info->addr_source = addr_info->addr_src; + ssif_info->ssif_debug = addr_info->debug; + ssif_info->addr_info = addr_info->addr_info; + slave_addr = addr_info->slave_addr; + } + } + + pr_info(PFX "Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n", + ipmi_addr_src_to_str(ssif_info->addr_source), + client->addr, client->adapter->name, slave_addr); + + /* + * Do a Get Device ID command, since it comes back with some + * useful info. + */ + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_DEVICE_ID_CMD; + rv = do_cmd(client, 2, msg, &len, resp); + if (rv) + goto out; + + rv = ipmi_demangle_device_id(resp, len, &ssif_info->device_id); + if (rv) + goto out; + + ssif_info->client = client; + i2c_set_clientdata(client, ssif_info); + + /* Now check for system interface capabilities */ + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD; + msg[2] = 0; /* SSIF */ + rv = do_cmd(client, 3, msg, &len, resp); + if (!rv && (len >= 3) && (resp[2] == 0)) { + if (len < 7) { + if (ssif_dbg_probe) + pr_info(PFX "SSIF info too short: %d\n", len); + goto no_support; + } + + /* Got a good SSIF response, handle it. */ + ssif_info->max_xmit_msg_size = resp[5]; + ssif_info->max_recv_msg_size = resp[6]; + ssif_info->multi_support = (resp[4] >> 6) & 0x3; + ssif_info->supports_pec = (resp[4] >> 3) & 0x1; + + /* Sanitize the data */ + switch (ssif_info->multi_support) { + case SSIF_NO_MULTI: + if (ssif_info->max_xmit_msg_size > 32) + ssif_info->max_xmit_msg_size = 32; + if (ssif_info->max_recv_msg_size > 32) + ssif_info->max_recv_msg_size = 32; + break; + + case SSIF_MULTI_2_PART: + if (ssif_info->max_xmit_msg_size > 63) + ssif_info->max_xmit_msg_size = 63; + if (ssif_info->max_recv_msg_size > 62) + ssif_info->max_recv_msg_size = 62; + break; + + case SSIF_MULTI_n_PART: + /* + * The specification is rather confusing at + * this point, but I think I understand what + * is meant. At least I have a workable + * solution. With multi-part messages, you + * cannot send a message that is a multiple of + * 32-bytes in length, because the start and + * middle messages are 32-bytes and the end + * message must be at least one byte. You + * can't fudge on an extra byte, that would + * screw up things like fru data writes. So + * we limit the length to 63 bytes. That way + * a 32-byte message gets sent as a single + * part. A larger message will be a 32-byte + * start and the next message is always going + * to be 1-31 bytes in length. Not ideal, but + * it should work. + */ + if (ssif_info->max_xmit_msg_size > 63) + ssif_info->max_xmit_msg_size = 63; + break; + + default: + /* Data is not sane, just give up. */ + goto no_support; + } + } else { + no_support: + /* Assume no multi-part or PEC support */ + pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n", + rv, len, resp[2]); + + ssif_info->max_xmit_msg_size = 32; + ssif_info->max_recv_msg_size = 32; + ssif_info->multi_support = SSIF_NO_MULTI; + ssif_info->supports_pec = 0; + } + + /* Make sure the NMI timeout is cleared. */ + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; + msg[2] = WDT_PRE_TIMEOUT_INT; + rv = do_cmd(client, 3, msg, &len, resp); + if (rv || (len < 3) || (resp[2] != 0)) + pr_warn(PFX "Unable to clear message flags: %d %d %2.2x\n", + rv, len, resp[2]); + + /* Attempt to enable the event buffer. */ + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; + rv = do_cmd(client, 2, msg, &len, resp); + if (rv || (len < 4) || (resp[2] != 0)) { + pr_warn(PFX "Error getting global enables: %d %d %2.2x\n", + rv, len, resp[2]); + rv = 0; /* Not fatal */ + goto found; + } + + ssif_info->global_enables = resp[3]; + + if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) { + ssif_info->has_event_buffer = true; + /* buffer is already enabled, nothing to do. */ + goto found; + } + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF; + rv = do_cmd(client, 3, msg, &len, resp); + if (rv || (len < 2)) { + pr_warn(PFX "Error setting global enables: %d %d %2.2x\n", + rv, len, resp[2]); + rv = 0; /* Not fatal */ + goto found; + } + + if (resp[2] == 0) { + /* A successful return means the event buffer is supported. */ + ssif_info->has_event_buffer = true; + ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF; + } + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR; + rv = do_cmd(client, 3, msg, &len, resp); + if (rv || (len < 2)) { + pr_warn(PFX "Error setting global enables: %d %d %2.2x\n", + rv, len, resp[2]); + rv = 0; /* Not fatal */ + goto found; + } + + if (resp[2] == 0) { + /* A successful return means the alert is supported. */ + ssif_info->supports_alert = true; + ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR; + } + + found: + ssif_info->intf_num = atomic_inc_return(&next_intf); + + if (ssif_dbg_probe) { + pr_info("ssif_probe: i2c_probe found device at i2c address %x\n", + client->addr); + } + + spin_lock_init(&ssif_info->lock); + ssif_info->ssif_state = SSIF_NORMAL; + init_timer(&ssif_info->retry_timer); + ssif_info->retry_timer.data = (unsigned long) ssif_info; + ssif_info->retry_timer.function = retry_timeout; + + for (i = 0; i < SSIF_NUM_STATS; i++) + atomic_set(&ssif_info->stats[i], 0); + + if (ssif_info->supports_pec) + ssif_info->client->flags |= I2C_CLIENT_PEC; + + ssif_info->handlers.owner = THIS_MODULE; + ssif_info->handlers.start_processing = ssif_start_processing; + ssif_info->handlers.get_smi_info = get_smi_info; + ssif_info->handlers.sender = sender; + ssif_info->handlers.request_events = request_events; + ssif_info->handlers.inc_usecount = inc_usecount; + ssif_info->handlers.dec_usecount = dec_usecount; + + { + unsigned int thread_num; + + thread_num = ((ssif_info->client->adapter->nr << 8) | + ssif_info->client->addr); + init_completion(&ssif_info->wake_thread); + ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info, + "kssif%4.4x", thread_num); + if (IS_ERR(ssif_info->thread)) { + rv = PTR_ERR(ssif_info->thread); + dev_notice(&ssif_info->client->dev, + "Could not start kernel thread: error %d\n", + rv); + goto out; + } + } + + rv = ipmi_register_smi(&ssif_info->handlers, + ssif_info, + &ssif_info->device_id, + &ssif_info->client->dev, + slave_addr); + if (rv) { + pr_err(PFX "Unable to register device: error %d\n", rv); + goto out; + } + + rv = ipmi_smi_add_proc_entry(ssif_info->intf, "type", + &smi_type_proc_ops, + ssif_info); + if (rv) { + pr_err(PFX "Unable to create proc entry: %d\n", rv); + goto out_err_unreg; + } + + rv = ipmi_smi_add_proc_entry(ssif_info->intf, "ssif_stats", + &smi_stats_proc_ops, + ssif_info); + if (rv) { + pr_err(PFX "Unable to create proc entry: %d\n", rv); + goto out_err_unreg; + } + + out: + if (rv) + kfree(ssif_info); + kfree(resp); + return rv; + + out_err_unreg: + ipmi_unregister_smi(ssif_info->intf); + goto out; +} + +static int ssif_adapter_handler(struct device *adev, void *opaque) +{ + struct ssif_addr_info *addr_info = opaque; + + if (adev->type != &i2c_adapter_type) + return 0; + + i2c_new_device(to_i2c_adapter(adev), &addr_info->binfo); + + if (!addr_info->adapter_name) + return 1; /* Only try the first I2C adapter by default. */ + return 0; +} + +static int new_ssif_client(int addr, char *adapter_name, + int debug, int slave_addr, + enum ipmi_addr_src addr_src) +{ + struct ssif_addr_info *addr_info; + int rv = 0; + + mutex_lock(&ssif_infos_mutex); + if (ssif_info_find(addr, adapter_name, false)) { + rv = -EEXIST; + goto out_unlock; + } + + addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL); + if (!addr_info) { + rv = -ENOMEM; + goto out_unlock; + } + + if (adapter_name) { + addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL); + if (!addr_info->adapter_name) { + kfree(addr_info); + rv = -ENOMEM; + goto out_unlock; + } + } + + strncpy(addr_info->binfo.type, DEVICE_NAME, + sizeof(addr_info->binfo.type)); + addr_info->binfo.addr = addr; + addr_info->binfo.platform_data = addr_info; + addr_info->debug = debug; + addr_info->slave_addr = slave_addr; + addr_info->addr_src = addr_src; + + list_add_tail(&addr_info->link, &ssif_infos); + + if (initialized) + i2c_for_each_dev(addr_info, ssif_adapter_handler); + /* Otherwise address list will get it */ + +out_unlock: + mutex_unlock(&ssif_infos_mutex); + return rv; +} + +static void free_ssif_clients(void) +{ + struct ssif_addr_info *info, *tmp; + + mutex_lock(&ssif_infos_mutex); + list_for_each_entry_safe(info, tmp, &ssif_infos, link) { + list_del(&info->link); + kfree(info->adapter_name); + kfree(info); + } + mutex_unlock(&ssif_infos_mutex); +} + +static unsigned short *ssif_address_list(void) +{ + struct ssif_addr_info *info; + unsigned int count = 0, i; + unsigned short *address_list; + + list_for_each_entry(info, &ssif_infos, link) + count++; + + address_list = kzalloc(sizeof(*address_list) * (count + 1), GFP_KERNEL); + if (!address_list) + return NULL; + + i = 0; + list_for_each_entry(info, &ssif_infos, link) { + unsigned short addr = info->binfo.addr; + int j; + + for (j = 0; j < i; j++) { + if (address_list[j] == addr) + goto skip_addr; + } + address_list[i] = addr; +skip_addr: + i++; + } + address_list[i] = I2C_CLIENT_END; + + return address_list; +} + +#ifdef CONFIG_ACPI +static struct acpi_device_id ssif_acpi_match[] = { + { "IPI0001", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, ssif_acpi_match); + +/* + * Once we get an ACPI failure, we don't try any more, because we go + * through the tables sequentially. Once we don't find a table, there + * are no more. + */ +static int acpi_failure; + +/* + * Defined in the IPMI 2.0 spec. + */ +struct SPMITable { + s8 Signature[4]; + u32 Length; + u8 Revision; + u8 Checksum; + s8 OEMID[6]; + s8 OEMTableID[8]; + s8 OEMRevision[4]; + s8 CreatorID[4]; + s8 CreatorRevision[4]; + u8 InterfaceType; + u8 IPMIlegacy; + s16 SpecificationRevision; + + /* + * Bit 0 - SCI interrupt supported + * Bit 1 - I/O APIC/SAPIC + */ + u8 InterruptType; + + /* + * If bit 0 of InterruptType is set, then this is the SCI + * interrupt in the GPEx_STS register. + */ + u8 GPE; + + s16 Reserved; + + /* + * If bit 1 of InterruptType is set, then this is the I/O + * APIC/SAPIC interrupt. + */ + u32 GlobalSystemInterrupt; + + /* The actual register address. */ + struct acpi_generic_address addr; + + u8 UID[4]; + + s8 spmi_id[1]; /* A '\0' terminated array starts here. */ +}; + +static int try_init_spmi(struct SPMITable *spmi) +{ + unsigned short myaddr; + + if (num_addrs >= MAX_SSIF_BMCS) + return -1; + + if (spmi->IPMIlegacy != 1) { + pr_warn("IPMI: Bad SPMI legacy: %d\n", spmi->IPMIlegacy); + return -ENODEV; + } + + if (spmi->InterfaceType != 4) + return -ENODEV; + + if (spmi->addr.space_id != ACPI_ADR_SPACE_SMBUS) { + pr_warn(PFX "Invalid ACPI SSIF I/O Address type: %d\n", + spmi->addr.space_id); + return -EIO; + } + + myaddr = spmi->addr.address >> 1; + + return new_ssif_client(myaddr, NULL, 0, 0, SI_SPMI); +} + +static void spmi_find_bmc(void) +{ + acpi_status status; + struct SPMITable *spmi; + int i; + + if (acpi_disabled) + return; + + if (acpi_failure) + return; + + for (i = 0; ; i++) { + status = acpi_get_table(ACPI_SIG_SPMI, i+1, + (struct acpi_table_header **)&spmi); + if (status != AE_OK) + return; + + try_init_spmi(spmi); + } +} +#else +static void spmi_find_bmc(void) { } +#endif + +#ifdef CONFIG_DMI +static int decode_dmi(const struct dmi_device *dmi_dev) +{ + struct dmi_header *dm = dmi_dev->device_data; + u8 *data = (u8 *) dm; + u8 len = dm->length; + unsigned short myaddr; + int slave_addr; + + if (num_addrs >= MAX_SSIF_BMCS) + return -1; + + if (len < 9) + return -1; + + if (data[0x04] != 4) /* Not SSIF */ + return -1; + + if ((data[8] >> 1) == 0) { + /* + * Some broken systems put the I2C address in + * the slave address field. We try to + * accommodate them here. + */ + myaddr = data[6] >> 1; + slave_addr = 0; + } else { + myaddr = data[8] >> 1; + slave_addr = data[6]; + } + + return new_ssif_client(myaddr, NULL, 0, 0, SI_SMBIOS); +} + +static void dmi_iterator(void) +{ + const struct dmi_device *dev = NULL; + + while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) + decode_dmi(dev); +} +#else +static void dmi_iterator(void) { } +#endif + +static const struct i2c_device_id ssif_id[] = { + { DEVICE_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ssif_id); + +static struct i2c_driver ssif_i2c_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .owner = THIS_MODULE, + .name = DEVICE_NAME + }, + .probe = ssif_probe, + .remove = ssif_remove, + .alert = ssif_alert, + .id_table = ssif_id, + .detect = ssif_detect +}; + +static int init_ipmi_ssif(void) +{ + int i; + int rv; + + if (initialized) + return 0; + + pr_info("IPMI SSIF Interface driver\n"); + + /* build list for i2c from addr list */ + for (i = 0; i < num_addrs; i++) { + rv = new_ssif_client(addr[i], adapter_name[i], + dbg[i], slave_addrs[i], + SI_HARDCODED); + if (rv) + pr_err(PFX + "Couldn't add hardcoded device at addr 0x%x\n", + addr[i]); + } + + if (ssif_tryacpi) + ssif_i2c_driver.driver.acpi_match_table = + ACPI_PTR(ssif_acpi_match); + if (ssif_trydmi) + dmi_iterator(); + if (ssif_tryacpi) + spmi_find_bmc(); + + ssif_i2c_driver.address_list = ssif_address_list(); + + rv = i2c_add_driver(&ssif_i2c_driver); + if (!rv) + initialized = true; + + return rv; +} +module_init(init_ipmi_ssif); + +static void cleanup_ipmi_ssif(void) +{ + if (!initialized) + return; + + initialized = false; + + i2c_del_driver(&ssif_i2c_driver); + + free_ssif_clients(); +} +module_exit(cleanup_ipmi_ssif); + +MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>"); +MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/char/ipmi/ipmi_watchdog.c b/kernel/drivers/char/ipmi/ipmi_watchdog.c new file mode 100644 index 000000000..37b8be7cb --- /dev/null +++ b/kernel/drivers/char/ipmi/ipmi_watchdog.c @@ -0,0 +1,1385 @@ +/* + * ipmi_watchdog.c + * + * A watchdog timer based upon the IPMI interface. + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/ipmi.h> +#include <linux/ipmi_smi.h> +#include <linux/mutex.h> +#include <linux/watchdog.h> +#include <linux/miscdevice.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/kdebug.h> +#include <linux/rwsem.h> +#include <linux/errno.h> +#include <asm/uaccess.h> +#include <linux/notifier.h> +#include <linux/nmi.h> +#include <linux/reboot.h> +#include <linux/wait.h> +#include <linux/poll.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/atomic.h> + +#ifdef CONFIG_X86 +/* + * This is ugly, but I've determined that x86 is the only architecture + * that can reasonably support the IPMI NMI watchdog timeout at this + * time. If another architecture adds this capability somehow, it + * will have to be a somewhat different mechanism and I have no idea + * how it will work. So in the unlikely event that another + * architecture supports this, we can figure out a good generic + * mechanism for it at that time. + */ +#include <asm/kdebug.h> +#include <asm/nmi.h> +#define HAVE_DIE_NMI +#endif + +#define PFX "IPMI Watchdog: " + +/* + * The IPMI command/response information for the watchdog timer. + */ + +/* values for byte 1 of the set command, byte 2 of the get response. */ +#define WDOG_DONT_LOG (1 << 7) +#define WDOG_DONT_STOP_ON_SET (1 << 6) +#define WDOG_SET_TIMER_USE(byte, use) \ + byte = ((byte) & 0xf8) | ((use) & 0x7) +#define WDOG_GET_TIMER_USE(byte) ((byte) & 0x7) +#define WDOG_TIMER_USE_BIOS_FRB2 1 +#define WDOG_TIMER_USE_BIOS_POST 2 +#define WDOG_TIMER_USE_OS_LOAD 3 +#define WDOG_TIMER_USE_SMS_OS 4 +#define WDOG_TIMER_USE_OEM 5 + +/* values for byte 2 of the set command, byte 3 of the get response. */ +#define WDOG_SET_PRETIMEOUT_ACT(byte, use) \ + byte = ((byte) & 0x8f) | (((use) & 0x7) << 4) +#define WDOG_GET_PRETIMEOUT_ACT(byte) (((byte) >> 4) & 0x7) +#define WDOG_PRETIMEOUT_NONE 0 +#define WDOG_PRETIMEOUT_SMI 1 +#define WDOG_PRETIMEOUT_NMI 2 +#define WDOG_PRETIMEOUT_MSG_INT 3 + +/* Operations that can be performed on a pretimout. */ +#define WDOG_PREOP_NONE 0 +#define WDOG_PREOP_PANIC 1 +/* Cause data to be available to read. Doesn't work in NMI mode. */ +#define WDOG_PREOP_GIVE_DATA 2 + +/* Actions to perform on a full timeout. */ +#define WDOG_SET_TIMEOUT_ACT(byte, use) \ + byte = ((byte) & 0xf8) | ((use) & 0x7) +#define WDOG_GET_TIMEOUT_ACT(byte) ((byte) & 0x7) +#define WDOG_TIMEOUT_NONE 0 +#define WDOG_TIMEOUT_RESET 1 +#define WDOG_TIMEOUT_POWER_DOWN 2 +#define WDOG_TIMEOUT_POWER_CYCLE 3 + +/* + * Byte 3 of the get command, byte 4 of the get response is the + * pre-timeout in seconds. + */ + +/* Bits for setting byte 4 of the set command, byte 5 of the get response. */ +#define WDOG_EXPIRE_CLEAR_BIOS_FRB2 (1 << 1) +#define WDOG_EXPIRE_CLEAR_BIOS_POST (1 << 2) +#define WDOG_EXPIRE_CLEAR_OS_LOAD (1 << 3) +#define WDOG_EXPIRE_CLEAR_SMS_OS (1 << 4) +#define WDOG_EXPIRE_CLEAR_OEM (1 << 5) + +/* + * Setting/getting the watchdog timer value. This is for bytes 5 and + * 6 (the timeout time) of the set command, and bytes 6 and 7 (the + * timeout time) and 8 and 9 (the current countdown value) of the + * response. The timeout value is given in seconds (in the command it + * is 100ms intervals). + */ +#define WDOG_SET_TIMEOUT(byte1, byte2, val) \ + (byte1) = (((val) * 10) & 0xff), (byte2) = (((val) * 10) >> 8) +#define WDOG_GET_TIMEOUT(byte1, byte2) \ + (((byte1) | ((byte2) << 8)) / 10) + +#define IPMI_WDOG_RESET_TIMER 0x22 +#define IPMI_WDOG_SET_TIMER 0x24 +#define IPMI_WDOG_GET_TIMER 0x25 + +#define IPMI_WDOG_TIMER_NOT_INIT_RESP 0x80 + +static DEFINE_MUTEX(ipmi_watchdog_mutex); +static bool nowayout = WATCHDOG_NOWAYOUT; + +static ipmi_user_t watchdog_user; +static int watchdog_ifnum; + +/* Default the timeout to 10 seconds. */ +static int timeout = 10; + +/* The pre-timeout is disabled by default. */ +static int pretimeout; + +/* Default action is to reset the board on a timeout. */ +static unsigned char action_val = WDOG_TIMEOUT_RESET; + +static char action[16] = "reset"; + +static unsigned char preaction_val = WDOG_PRETIMEOUT_NONE; + +static char preaction[16] = "pre_none"; + +static unsigned char preop_val = WDOG_PREOP_NONE; + +static char preop[16] = "preop_none"; +static DEFINE_SPINLOCK(ipmi_read_lock); +static char data_to_read; +static DECLARE_WAIT_QUEUE_HEAD(read_q); +static struct fasync_struct *fasync_q; +static char pretimeout_since_last_heartbeat; +static char expect_close; + +static int ifnum_to_use = -1; + +/* Parameters to ipmi_set_timeout */ +#define IPMI_SET_TIMEOUT_NO_HB 0 +#define IPMI_SET_TIMEOUT_HB_IF_NECESSARY 1 +#define IPMI_SET_TIMEOUT_FORCE_HB 2 + +static int ipmi_set_timeout(int do_heartbeat); +static void ipmi_register_watchdog(int ipmi_intf); +static void ipmi_unregister_watchdog(int ipmi_intf); + +/* + * If true, the driver will start running as soon as it is configured + * and ready. + */ +static int start_now; + +static int set_param_timeout(const char *val, const struct kernel_param *kp) +{ + char *endp; + int l; + int rv = 0; + + if (!val) + return -EINVAL; + l = simple_strtoul(val, &endp, 0); + if (endp == val) + return -EINVAL; + + *((int *)kp->arg) = l; + if (watchdog_user) + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); + + return rv; +} + +static struct kernel_param_ops param_ops_timeout = { + .set = set_param_timeout, + .get = param_get_int, +}; +#define param_check_timeout param_check_int + +typedef int (*action_fn)(const char *intval, char *outval); + +static int action_op(const char *inval, char *outval); +static int preaction_op(const char *inval, char *outval); +static int preop_op(const char *inval, char *outval); +static void check_parms(void); + +static int set_param_str(const char *val, const struct kernel_param *kp) +{ + action_fn fn = (action_fn) kp->arg; + int rv = 0; + char valcp[16]; + char *s; + + strncpy(valcp, val, 16); + valcp[15] = '\0'; + + s = strstrip(valcp); + + rv = fn(s, NULL); + if (rv) + goto out; + + check_parms(); + if (watchdog_user) + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); + + out: + return rv; +} + +static int get_param_str(char *buffer, const struct kernel_param *kp) +{ + action_fn fn = (action_fn) kp->arg; + int rv; + + rv = fn(NULL, buffer); + if (rv) + return rv; + return strlen(buffer); +} + + +static int set_param_wdog_ifnum(const char *val, const struct kernel_param *kp) +{ + int rv = param_set_int(val, kp); + if (rv) + return rv; + if ((ifnum_to_use < 0) || (ifnum_to_use == watchdog_ifnum)) + return 0; + + ipmi_unregister_watchdog(watchdog_ifnum); + ipmi_register_watchdog(ifnum_to_use); + return 0; +} + +static struct kernel_param_ops param_ops_wdog_ifnum = { + .set = set_param_wdog_ifnum, + .get = param_get_int, +}; + +#define param_check_wdog_ifnum param_check_int + +static struct kernel_param_ops param_ops_str = { + .set = set_param_str, + .get = get_param_str, +}; + +module_param(ifnum_to_use, wdog_ifnum, 0644); +MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " + "timer. Setting to -1 defaults to the first registered " + "interface"); + +module_param(timeout, timeout, 0644); +MODULE_PARM_DESC(timeout, "Timeout value in seconds."); + +module_param(pretimeout, timeout, 0644); +MODULE_PARM_DESC(pretimeout, "Pretimeout value in seconds."); + +module_param_cb(action, ¶m_ops_str, action_op, 0644); +MODULE_PARM_DESC(action, "Timeout action. One of: " + "reset, none, power_cycle, power_off."); + +module_param_cb(preaction, ¶m_ops_str, preaction_op, 0644); +MODULE_PARM_DESC(preaction, "Pretimeout action. One of: " + "pre_none, pre_smi, pre_nmi, pre_int."); + +module_param_cb(preop, ¶m_ops_str, preop_op, 0644); +MODULE_PARM_DESC(preop, "Pretimeout driver operation. One of: " + "preop_none, preop_panic, preop_give_data."); + +module_param(start_now, int, 0444); +MODULE_PARM_DESC(start_now, "Set to 1 to start the watchdog as" + "soon as the driver is loaded."); + +module_param(nowayout, bool, 0644); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=CONFIG_WATCHDOG_NOWAYOUT)"); + +/* Default state of the timer. */ +static unsigned char ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + +/* If shutting down via IPMI, we ignore the heartbeat. */ +static int ipmi_ignore_heartbeat; + +/* Is someone using the watchdog? Only one user is allowed. */ +static unsigned long ipmi_wdog_open; + +/* + * If set to 1, the heartbeat command will set the state to reset and + * start the timer. The timer doesn't normally run when the driver is + * first opened until the heartbeat is set the first time, this + * variable is used to accomplish this. + */ +static int ipmi_start_timer_on_heartbeat; + +/* IPMI version of the BMC. */ +static unsigned char ipmi_version_major; +static unsigned char ipmi_version_minor; + +/* If a pretimeout occurs, this is used to allow only one panic to happen. */ +static atomic_t preop_panic_excl = ATOMIC_INIT(-1); + +#ifdef HAVE_DIE_NMI +static int testing_nmi; +static int nmi_handler_registered; +#endif + +static int ipmi_heartbeat(void); + +/* + * We use a mutex to make sure that only one thing can send a set + * timeout at one time, because we only have one copy of the data. + * The mutex is claimed when the set_timeout is sent and freed + * when both messages are free. + */ +static atomic_t set_timeout_tofree = ATOMIC_INIT(0); +static DEFINE_MUTEX(set_timeout_lock); +static DECLARE_COMPLETION(set_timeout_wait); +static void set_timeout_free_smi(struct ipmi_smi_msg *msg) +{ + if (atomic_dec_and_test(&set_timeout_tofree)) + complete(&set_timeout_wait); +} +static void set_timeout_free_recv(struct ipmi_recv_msg *msg) +{ + if (atomic_dec_and_test(&set_timeout_tofree)) + complete(&set_timeout_wait); +} +static struct ipmi_smi_msg set_timeout_smi_msg = { + .done = set_timeout_free_smi +}; +static struct ipmi_recv_msg set_timeout_recv_msg = { + .done = set_timeout_free_recv +}; + +static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg, + struct ipmi_recv_msg *recv_msg, + int *send_heartbeat_now) +{ + struct kernel_ipmi_msg msg; + unsigned char data[6]; + int rv; + struct ipmi_system_interface_addr addr; + int hbnow = 0; + + + /* These can be cleared as we are setting the timeout. */ + pretimeout_since_last_heartbeat = 0; + + data[0] = 0; + WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS); + + if ((ipmi_version_major > 1) + || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) { + /* This is an IPMI 1.5-only feature. */ + data[0] |= WDOG_DONT_STOP_ON_SET; + } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { + /* + * In ipmi 1.0, setting the timer stops the watchdog, we + * need to start it back up again. + */ + hbnow = 1; + } + + data[1] = 0; + WDOG_SET_TIMEOUT_ACT(data[1], ipmi_watchdog_state); + if ((pretimeout > 0) && (ipmi_watchdog_state != WDOG_TIMEOUT_NONE)) { + WDOG_SET_PRETIMEOUT_ACT(data[1], preaction_val); + data[2] = pretimeout; + } else { + WDOG_SET_PRETIMEOUT_ACT(data[1], WDOG_PRETIMEOUT_NONE); + data[2] = 0; /* No pretimeout. */ + } + data[3] = 0; + WDOG_SET_TIMEOUT(data[4], data[5], timeout); + + addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + addr.channel = IPMI_BMC_CHANNEL; + addr.lun = 0; + + msg.netfn = 0x06; + msg.cmd = IPMI_WDOG_SET_TIMER; + msg.data = data; + msg.data_len = sizeof(data); + rv = ipmi_request_supply_msgs(watchdog_user, + (struct ipmi_addr *) &addr, + 0, + &msg, + NULL, + smi_msg, + recv_msg, + 1); + if (rv) { + printk(KERN_WARNING PFX "set timeout error: %d\n", + rv); + } + + if (send_heartbeat_now) + *send_heartbeat_now = hbnow; + + return rv; +} + +static int ipmi_set_timeout(int do_heartbeat) +{ + int send_heartbeat_now; + int rv; + + + /* We can only send one of these at a time. */ + mutex_lock(&set_timeout_lock); + + atomic_set(&set_timeout_tofree, 2); + + rv = i_ipmi_set_timeout(&set_timeout_smi_msg, + &set_timeout_recv_msg, + &send_heartbeat_now); + if (rv) { + mutex_unlock(&set_timeout_lock); + goto out; + } + + wait_for_completion(&set_timeout_wait); + + mutex_unlock(&set_timeout_lock); + + if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB) + || ((send_heartbeat_now) + && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY))) + rv = ipmi_heartbeat(); + +out: + return rv; +} + +static atomic_t panic_done_count = ATOMIC_INIT(0); + +static void panic_smi_free(struct ipmi_smi_msg *msg) +{ + atomic_dec(&panic_done_count); +} +static void panic_recv_free(struct ipmi_recv_msg *msg) +{ + atomic_dec(&panic_done_count); +} + +static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = { + .done = panic_smi_free +}; +static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = { + .done = panic_recv_free +}; + +static void panic_halt_ipmi_heartbeat(void) +{ + struct kernel_ipmi_msg msg; + struct ipmi_system_interface_addr addr; + int rv; + + /* + * Don't reset the timer if we have the timer turned off, that + * re-enables the watchdog. + */ + if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) + return; + + addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + addr.channel = IPMI_BMC_CHANNEL; + addr.lun = 0; + + msg.netfn = 0x06; + msg.cmd = IPMI_WDOG_RESET_TIMER; + msg.data = NULL; + msg.data_len = 0; + atomic_add(2, &panic_done_count); + rv = ipmi_request_supply_msgs(watchdog_user, + (struct ipmi_addr *) &addr, + 0, + &msg, + NULL, + &panic_halt_heartbeat_smi_msg, + &panic_halt_heartbeat_recv_msg, + 1); + if (rv) + atomic_sub(2, &panic_done_count); +} + +static struct ipmi_smi_msg panic_halt_smi_msg = { + .done = panic_smi_free +}; +static struct ipmi_recv_msg panic_halt_recv_msg = { + .done = panic_recv_free +}; + +/* + * Special call, doesn't claim any locks. This is only to be called + * at panic or halt time, in run-to-completion mode, when the caller + * is the only CPU and the only thing that will be going is these IPMI + * calls. + */ +static void panic_halt_ipmi_set_timeout(void) +{ + int send_heartbeat_now; + int rv; + + /* Wait for the messages to be free. */ + while (atomic_read(&panic_done_count) != 0) + ipmi_poll_interface(watchdog_user); + atomic_add(2, &panic_done_count); + rv = i_ipmi_set_timeout(&panic_halt_smi_msg, + &panic_halt_recv_msg, + &send_heartbeat_now); + if (rv) { + atomic_sub(2, &panic_done_count); + printk(KERN_WARNING PFX + "Unable to extend the watchdog timeout."); + } else { + if (send_heartbeat_now) + panic_halt_ipmi_heartbeat(); + } + while (atomic_read(&panic_done_count) != 0) + ipmi_poll_interface(watchdog_user); +} + +/* + * We use a mutex to make sure that only one thing can send a + * heartbeat at one time, because we only have one copy of the data. + * The semaphore is claimed when the set_timeout is sent and freed + * when both messages are free. + */ +static atomic_t heartbeat_tofree = ATOMIC_INIT(0); +static DEFINE_MUTEX(heartbeat_lock); +static DECLARE_COMPLETION(heartbeat_wait); +static void heartbeat_free_smi(struct ipmi_smi_msg *msg) +{ + if (atomic_dec_and_test(&heartbeat_tofree)) + complete(&heartbeat_wait); +} +static void heartbeat_free_recv(struct ipmi_recv_msg *msg) +{ + if (atomic_dec_and_test(&heartbeat_tofree)) + complete(&heartbeat_wait); +} +static struct ipmi_smi_msg heartbeat_smi_msg = { + .done = heartbeat_free_smi +}; +static struct ipmi_recv_msg heartbeat_recv_msg = { + .done = heartbeat_free_recv +}; + +static int ipmi_heartbeat(void) +{ + struct kernel_ipmi_msg msg; + int rv; + struct ipmi_system_interface_addr addr; + int timeout_retries = 0; + + if (ipmi_ignore_heartbeat) + return 0; + + if (ipmi_start_timer_on_heartbeat) { + ipmi_start_timer_on_heartbeat = 0; + ipmi_watchdog_state = action_val; + return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + } else if (pretimeout_since_last_heartbeat) { + /* + * A pretimeout occurred, make sure we set the timeout. + * We don't want to set the action, though, we want to + * leave that alone (thus it can't be combined with the + * above operation. + */ + return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); + } + + mutex_lock(&heartbeat_lock); + +restart: + atomic_set(&heartbeat_tofree, 2); + + /* + * Don't reset the timer if we have the timer turned off, that + * re-enables the watchdog. + */ + if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) { + mutex_unlock(&heartbeat_lock); + return 0; + } + + addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + addr.channel = IPMI_BMC_CHANNEL; + addr.lun = 0; + + msg.netfn = 0x06; + msg.cmd = IPMI_WDOG_RESET_TIMER; + msg.data = NULL; + msg.data_len = 0; + rv = ipmi_request_supply_msgs(watchdog_user, + (struct ipmi_addr *) &addr, + 0, + &msg, + NULL, + &heartbeat_smi_msg, + &heartbeat_recv_msg, + 1); + if (rv) { + mutex_unlock(&heartbeat_lock); + printk(KERN_WARNING PFX "heartbeat failure: %d\n", + rv); + return rv; + } + + /* Wait for the heartbeat to be sent. */ + wait_for_completion(&heartbeat_wait); + + if (heartbeat_recv_msg.msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) { + timeout_retries++; + if (timeout_retries > 3) { + printk(KERN_ERR PFX ": Unable to restore the IPMI" + " watchdog's settings, giving up.\n"); + rv = -EIO; + goto out_unlock; + } + + /* + * The timer was not initialized, that means the BMC was + * probably reset and lost the watchdog information. Attempt + * to restore the timer's info. Note that we still hold + * the heartbeat lock, to keep a heartbeat from happening + * in this process, so must say no heartbeat to avoid a + * deadlock on this mutex. + */ + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + if (rv) { + printk(KERN_ERR PFX ": Unable to send the command to" + " set the watchdog's settings, giving up.\n"); + goto out_unlock; + } + + /* We might need a new heartbeat, so do it now */ + goto restart; + } else if (heartbeat_recv_msg.msg.data[0] != 0) { + /* + * Got an error in the heartbeat response. It was already + * reported in ipmi_wdog_msg_handler, but we should return + * an error here. + */ + rv = -EINVAL; + } + +out_unlock: + mutex_unlock(&heartbeat_lock); + + return rv; +} + +static struct watchdog_info ident = { + .options = 0, /* WDIOF_SETTIMEOUT, */ + .firmware_version = 1, + .identity = "IPMI" +}; + +static int ipmi_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int i; + int val; + + switch (cmd) { + case WDIOC_GETSUPPORT: + i = copy_to_user(argp, &ident, sizeof(ident)); + return i ? -EFAULT : 0; + + case WDIOC_SETTIMEOUT: + i = copy_from_user(&val, argp, sizeof(int)); + if (i) + return -EFAULT; + timeout = val; + return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); + + case WDIOC_GETTIMEOUT: + i = copy_to_user(argp, &timeout, sizeof(timeout)); + if (i) + return -EFAULT; + return 0; + + case WDIOC_SETPRETIMEOUT: + i = copy_from_user(&val, argp, sizeof(int)); + if (i) + return -EFAULT; + pretimeout = val; + return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); + + case WDIOC_GETPRETIMEOUT: + i = copy_to_user(argp, &pretimeout, sizeof(pretimeout)); + if (i) + return -EFAULT; + return 0; + + case WDIOC_KEEPALIVE: + return ipmi_heartbeat(); + + case WDIOC_SETOPTIONS: + i = copy_from_user(&val, argp, sizeof(int)); + if (i) + return -EFAULT; + if (val & WDIOS_DISABLECARD) { + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + ipmi_start_timer_on_heartbeat = 0; + } + + if (val & WDIOS_ENABLECARD) { + ipmi_watchdog_state = action_val; + ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + } + return 0; + + case WDIOC_GETSTATUS: + val = 0; + i = copy_to_user(argp, &val, sizeof(val)); + if (i) + return -EFAULT; + return 0; + + default: + return -ENOIOCTLCMD; + } +} + +static long ipmi_unlocked_ioctl(struct file *file, + unsigned int cmd, + unsigned long arg) +{ + int ret; + + mutex_lock(&ipmi_watchdog_mutex); + ret = ipmi_ioctl(file, cmd, arg); + mutex_unlock(&ipmi_watchdog_mutex); + + return ret; +} + +static ssize_t ipmi_write(struct file *file, + const char __user *buf, + size_t len, + loff_t *ppos) +{ + int rv; + + if (len) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + rv = ipmi_heartbeat(); + if (rv) + return rv; + } + return len; +} + +static ssize_t ipmi_read(struct file *file, + char __user *buf, + size_t count, + loff_t *ppos) +{ + int rv = 0; + wait_queue_t wait; + + if (count <= 0) + return 0; + + /* + * Reading returns if the pretimeout has gone off, and it only does + * it once per pretimeout. + */ + spin_lock(&ipmi_read_lock); + if (!data_to_read) { + if (file->f_flags & O_NONBLOCK) { + rv = -EAGAIN; + goto out; + } + + init_waitqueue_entry(&wait, current); + add_wait_queue(&read_q, &wait); + while (!data_to_read) { + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock(&ipmi_read_lock); + schedule(); + spin_lock(&ipmi_read_lock); + } + remove_wait_queue(&read_q, &wait); + + if (signal_pending(current)) { + rv = -ERESTARTSYS; + goto out; + } + } + data_to_read = 0; + + out: + spin_unlock(&ipmi_read_lock); + + if (rv == 0) { + if (copy_to_user(buf, &data_to_read, 1)) + rv = -EFAULT; + else + rv = 1; + } + + return rv; +} + +static int ipmi_open(struct inode *ino, struct file *filep) +{ + switch (iminor(ino)) { + case WATCHDOG_MINOR: + if (test_and_set_bit(0, &ipmi_wdog_open)) + return -EBUSY; + + + /* + * Don't start the timer now, let it start on the + * first heartbeat. + */ + ipmi_start_timer_on_heartbeat = 1; + return nonseekable_open(ino, filep); + + default: + return (-ENODEV); + } +} + +static unsigned int ipmi_poll(struct file *file, poll_table *wait) +{ + unsigned int mask = 0; + + poll_wait(file, &read_q, wait); + + spin_lock(&ipmi_read_lock); + if (data_to_read) + mask |= (POLLIN | POLLRDNORM); + spin_unlock(&ipmi_read_lock); + + return mask; +} + +static int ipmi_fasync(int fd, struct file *file, int on) +{ + int result; + + result = fasync_helper(fd, file, on, &fasync_q); + + return (result); +} + +static int ipmi_close(struct inode *ino, struct file *filep) +{ + if (iminor(ino) == WATCHDOG_MINOR) { + if (expect_close == 42) { + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + } else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); + ipmi_heartbeat(); + } + clear_bit(0, &ipmi_wdog_open); + } + + expect_close = 0; + + return 0; +} + +static const struct file_operations ipmi_wdog_fops = { + .owner = THIS_MODULE, + .read = ipmi_read, + .poll = ipmi_poll, + .write = ipmi_write, + .unlocked_ioctl = ipmi_unlocked_ioctl, + .open = ipmi_open, + .release = ipmi_close, + .fasync = ipmi_fasync, + .llseek = no_llseek, +}; + +static struct miscdevice ipmi_wdog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ipmi_wdog_fops +}; + +static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg, + void *handler_data) +{ + if (msg->msg.cmd == IPMI_WDOG_RESET_TIMER && + msg->msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) + printk(KERN_INFO PFX "response: The IPMI controller appears" + " to have been reset, will attempt to reinitialize" + " the watchdog timer\n"); + else if (msg->msg.data[0] != 0) + printk(KERN_ERR PFX "response: Error %x on cmd %x\n", + msg->msg.data[0], + msg->msg.cmd); + + ipmi_free_recv_msg(msg); +} + +static void ipmi_wdog_pretimeout_handler(void *handler_data) +{ + if (preaction_val != WDOG_PRETIMEOUT_NONE) { + if (preop_val == WDOG_PREOP_PANIC) { + if (atomic_inc_and_test(&preop_panic_excl)) + panic("Watchdog pre-timeout"); + } else if (preop_val == WDOG_PREOP_GIVE_DATA) { + spin_lock(&ipmi_read_lock); + data_to_read = 1; + wake_up_interruptible(&read_q); + kill_fasync(&fasync_q, SIGIO, POLL_IN); + + spin_unlock(&ipmi_read_lock); + } + } + + /* + * On some machines, the heartbeat will give an error and not + * work unless we re-enable the timer. So do so. + */ + pretimeout_since_last_heartbeat = 1; +} + +static struct ipmi_user_hndl ipmi_hndlrs = { + .ipmi_recv_hndl = ipmi_wdog_msg_handler, + .ipmi_watchdog_pretimeout = ipmi_wdog_pretimeout_handler +}; + +static void ipmi_register_watchdog(int ipmi_intf) +{ + int rv = -EBUSY; + + if (watchdog_user) + goto out; + + if ((ifnum_to_use >= 0) && (ifnum_to_use != ipmi_intf)) + goto out; + + watchdog_ifnum = ipmi_intf; + + rv = ipmi_create_user(ipmi_intf, &ipmi_hndlrs, NULL, &watchdog_user); + if (rv < 0) { + printk(KERN_CRIT PFX "Unable to register with ipmi\n"); + goto out; + } + + ipmi_get_version(watchdog_user, + &ipmi_version_major, + &ipmi_version_minor); + + rv = misc_register(&ipmi_wdog_miscdev); + if (rv < 0) { + ipmi_destroy_user(watchdog_user); + watchdog_user = NULL; + printk(KERN_CRIT PFX "Unable to register misc device\n"); + } + +#ifdef HAVE_DIE_NMI + if (nmi_handler_registered) { + int old_pretimeout = pretimeout; + int old_timeout = timeout; + int old_preop_val = preop_val; + + /* + * Set the pretimeout to go off in a second and give + * ourselves plenty of time to stop the timer. + */ + ipmi_watchdog_state = WDOG_TIMEOUT_RESET; + preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */ + pretimeout = 99; + timeout = 100; + + testing_nmi = 1; + + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + if (rv) { + printk(KERN_WARNING PFX "Error starting timer to" + " test NMI: 0x%x. The NMI pretimeout will" + " likely not work\n", rv); + rv = 0; + goto out_restore; + } + + msleep(1500); + + if (testing_nmi != 2) { + printk(KERN_WARNING PFX "IPMI NMI didn't seem to" + " occur. The NMI pretimeout will" + " likely not work\n"); + } + out_restore: + testing_nmi = 0; + preop_val = old_preop_val; + pretimeout = old_pretimeout; + timeout = old_timeout; + } +#endif + + out: + if ((start_now) && (rv == 0)) { + /* Run from startup, so start the timer now. */ + start_now = 0; /* Disable this function after first startup. */ + ipmi_watchdog_state = action_val; + ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + printk(KERN_INFO PFX "Starting now!\n"); + } else { + /* Stop the timer now. */ + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + } +} + +static void ipmi_unregister_watchdog(int ipmi_intf) +{ + int rv; + + if (!watchdog_user) + goto out; + + if (watchdog_ifnum != ipmi_intf) + goto out; + + /* Make sure no one can call us any more. */ + misc_deregister(&ipmi_wdog_miscdev); + + /* + * Wait to make sure the message makes it out. The lower layer has + * pointers to our buffers, we want to make sure they are done before + * we release our memory. + */ + while (atomic_read(&set_timeout_tofree)) + schedule_timeout_uninterruptible(1); + + /* Disconnect from IPMI. */ + rv = ipmi_destroy_user(watchdog_user); + if (rv) { + printk(KERN_WARNING PFX "error unlinking from IPMI: %d\n", + rv); + } + watchdog_user = NULL; + + out: + return; +} + +#ifdef HAVE_DIE_NMI +static int +ipmi_nmi(unsigned int val, struct pt_regs *regs) +{ + /* + * If we get here, it's an NMI that's not a memory or I/O + * error. We can't truly tell if it's from IPMI or not + * without sending a message, and sending a message is almost + * impossible because of locking. + */ + + if (testing_nmi) { + testing_nmi = 2; + return NMI_HANDLED; + } + + /* If we are not expecting a timeout, ignore it. */ + if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) + return NMI_DONE; + + if (preaction_val != WDOG_PRETIMEOUT_NMI) + return NMI_DONE; + + /* + * If no one else handled the NMI, we assume it was the IPMI + * watchdog. + */ + if (preop_val == WDOG_PREOP_PANIC) { + /* On some machines, the heartbeat will give + an error and not work unless we re-enable + the timer. So do so. */ + pretimeout_since_last_heartbeat = 1; + if (atomic_inc_and_test(&preop_panic_excl)) + panic(PFX "pre-timeout"); + } + + return NMI_HANDLED; +} +#endif + +static int wdog_reboot_handler(struct notifier_block *this, + unsigned long code, + void *unused) +{ + static int reboot_event_handled; + + if ((watchdog_user) && (!reboot_event_handled)) { + /* Make sure we only do this once. */ + reboot_event_handled = 1; + + if (code == SYS_POWER_OFF || code == SYS_HALT) { + /* Disable the WDT if we are shutting down. */ + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { + /* Set a long timer to let the reboot happens, but + reboot if it hangs, but only if the watchdog + timer was already running. */ + timeout = 120; + pretimeout = 0; + ipmi_watchdog_state = WDOG_TIMEOUT_RESET; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + } + } + return NOTIFY_OK; +} + +static struct notifier_block wdog_reboot_notifier = { + .notifier_call = wdog_reboot_handler, + .next = NULL, + .priority = 0 +}; + +static int wdog_panic_handler(struct notifier_block *this, + unsigned long event, + void *unused) +{ + static int panic_event_handled; + + /* On a panic, if we have a panic timeout, make sure to extend + the watchdog timer to a reasonable value to complete the + panic, if the watchdog timer is running. Plus the + pretimeout is meaningless at panic time. */ + if (watchdog_user && !panic_event_handled && + ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { + /* Make sure we do this only once. */ + panic_event_handled = 1; + + timeout = 255; + pretimeout = 0; + panic_halt_ipmi_set_timeout(); + } + + return NOTIFY_OK; +} + +static struct notifier_block wdog_panic_notifier = { + .notifier_call = wdog_panic_handler, + .next = NULL, + .priority = 150 /* priority: INT_MAX >= x >= 0 */ +}; + + +static void ipmi_new_smi(int if_num, struct device *device) +{ + ipmi_register_watchdog(if_num); +} + +static void ipmi_smi_gone(int if_num) +{ + ipmi_unregister_watchdog(if_num); +} + +static struct ipmi_smi_watcher smi_watcher = { + .owner = THIS_MODULE, + .new_smi = ipmi_new_smi, + .smi_gone = ipmi_smi_gone +}; + +static int action_op(const char *inval, char *outval) +{ + if (outval) + strcpy(outval, action); + + if (!inval) + return 0; + + if (strcmp(inval, "reset") == 0) + action_val = WDOG_TIMEOUT_RESET; + else if (strcmp(inval, "none") == 0) + action_val = WDOG_TIMEOUT_NONE; + else if (strcmp(inval, "power_cycle") == 0) + action_val = WDOG_TIMEOUT_POWER_CYCLE; + else if (strcmp(inval, "power_off") == 0) + action_val = WDOG_TIMEOUT_POWER_DOWN; + else + return -EINVAL; + strcpy(action, inval); + return 0; +} + +static int preaction_op(const char *inval, char *outval) +{ + if (outval) + strcpy(outval, preaction); + + if (!inval) + return 0; + + if (strcmp(inval, "pre_none") == 0) + preaction_val = WDOG_PRETIMEOUT_NONE; + else if (strcmp(inval, "pre_smi") == 0) + preaction_val = WDOG_PRETIMEOUT_SMI; +#ifdef HAVE_DIE_NMI + else if (strcmp(inval, "pre_nmi") == 0) + preaction_val = WDOG_PRETIMEOUT_NMI; +#endif + else if (strcmp(inval, "pre_int") == 0) + preaction_val = WDOG_PRETIMEOUT_MSG_INT; + else + return -EINVAL; + strcpy(preaction, inval); + return 0; +} + +static int preop_op(const char *inval, char *outval) +{ + if (outval) + strcpy(outval, preop); + + if (!inval) + return 0; + + if (strcmp(inval, "preop_none") == 0) + preop_val = WDOG_PREOP_NONE; + else if (strcmp(inval, "preop_panic") == 0) + preop_val = WDOG_PREOP_PANIC; + else if (strcmp(inval, "preop_give_data") == 0) + preop_val = WDOG_PREOP_GIVE_DATA; + else + return -EINVAL; + strcpy(preop, inval); + return 0; +} + +static void check_parms(void) +{ +#ifdef HAVE_DIE_NMI + int do_nmi = 0; + int rv; + + if (preaction_val == WDOG_PRETIMEOUT_NMI) { + do_nmi = 1; + if (preop_val == WDOG_PREOP_GIVE_DATA) { + printk(KERN_WARNING PFX "Pretimeout op is to give data" + " but NMI pretimeout is enabled, setting" + " pretimeout op to none\n"); + preop_op("preop_none", NULL); + do_nmi = 0; + } + } + if (do_nmi && !nmi_handler_registered) { + rv = register_nmi_handler(NMI_UNKNOWN, ipmi_nmi, 0, + "ipmi"); + if (rv) { + printk(KERN_WARNING PFX + "Can't register nmi handler\n"); + return; + } else + nmi_handler_registered = 1; + } else if (!do_nmi && nmi_handler_registered) { + unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); + nmi_handler_registered = 0; + } +#endif +} + +static int __init ipmi_wdog_init(void) +{ + int rv; + + if (action_op(action, NULL)) { + action_op("reset", NULL); + printk(KERN_INFO PFX "Unknown action '%s', defaulting to" + " reset\n", action); + } + + if (preaction_op(preaction, NULL)) { + preaction_op("pre_none", NULL); + printk(KERN_INFO PFX "Unknown preaction '%s', defaulting to" + " none\n", preaction); + } + + if (preop_op(preop, NULL)) { + preop_op("preop_none", NULL); + printk(KERN_INFO PFX "Unknown preop '%s', defaulting to" + " none\n", preop); + } + + check_parms(); + + register_reboot_notifier(&wdog_reboot_notifier); + atomic_notifier_chain_register(&panic_notifier_list, + &wdog_panic_notifier); + + rv = ipmi_smi_watcher_register(&smi_watcher); + if (rv) { +#ifdef HAVE_DIE_NMI + if (nmi_handler_registered) + unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); +#endif + atomic_notifier_chain_unregister(&panic_notifier_list, + &wdog_panic_notifier); + unregister_reboot_notifier(&wdog_reboot_notifier); + printk(KERN_WARNING PFX "can't register smi watcher\n"); + return rv; + } + + printk(KERN_INFO PFX "driver initialized\n"); + + return 0; +} + +static void __exit ipmi_wdog_exit(void) +{ + ipmi_smi_watcher_unregister(&smi_watcher); + ipmi_unregister_watchdog(watchdog_ifnum); + +#ifdef HAVE_DIE_NMI + if (nmi_handler_registered) + unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); +#endif + + atomic_notifier_chain_unregister(&panic_notifier_list, + &wdog_panic_notifier); + unregister_reboot_notifier(&wdog_reboot_notifier); +} +module_exit(ipmi_wdog_exit); +module_init(ipmi_wdog_init); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); +MODULE_DESCRIPTION("watchdog timer based upon the IPMI interface."); |