summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/bluetooth/hci_ldisc.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/bluetooth/hci_ldisc.c')
-rw-r--r--kernel/drivers/bluetooth/hci_ldisc.c161
1 files changed, 146 insertions, 15 deletions
diff --git a/kernel/drivers/bluetooth/hci_ldisc.c b/kernel/drivers/bluetooth/hci_ldisc.c
index 5c9a73f02..96bcec559 100644
--- a/kernel/drivers/bluetooth/hci_ldisc.c
+++ b/kernel/drivers/bluetooth/hci_ldisc.c
@@ -40,6 +40,7 @@
#include <linux/signal.h>
#include <linux/ioctl.h>
#include <linux/skbuff.h>
+#include <linux/firmware.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -207,9 +208,6 @@ static int hci_uart_open(struct hci_dev *hdev)
BT_DBG("%s %p", hdev->name, hdev);
/* Nothing to do for UART driver */
-
- set_bit(HCI_RUNNING, &hdev->flags);
-
return 0;
}
@@ -240,9 +238,6 @@ static int hci_uart_close(struct hci_dev *hdev)
{
BT_DBG("hdev %p", hdev);
- if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
- return 0;
-
hci_uart_flush(hdev);
hdev->flush = NULL;
return 0;
@@ -253,9 +248,6 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
- if (!test_bit(HCI_RUNNING, &hdev->flags))
- return -EBUSY;
-
BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type, skb->len);
hu->proto->enqueue(hu, skb);
@@ -265,11 +257,133 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
+/* Flow control or un-flow control the device */
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+ int status;
+ unsigned int set = 0;
+ unsigned int clear = 0;
+
+ if (enable) {
+ /* Disable hardware flow control */
+ ktermios = tty->termios;
+ ktermios.c_cflag &= ~CRTSCTS;
+ status = tty_set_termios(tty, &ktermios);
+ BT_DBG("Disabling hardware flow control: %s",
+ status ? "failed" : "success");
+
+ /* Clear RTS to prevent the device from sending */
+ /* Most UARTs need OUT2 to enable interrupts */
+ status = tty->driver->ops->tiocmget(tty);
+ BT_DBG("Current tiocm 0x%x", status);
+
+ set &= ~(TIOCM_OUT2 | TIOCM_RTS);
+ clear = ~set;
+ set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ status = tty->driver->ops->tiocmset(tty, set, clear);
+ BT_DBG("Clearing RTS: %s", status ? "failed" : "success");
+ } else {
+ /* Set RTS to allow the device to send again */
+ status = tty->driver->ops->tiocmget(tty);
+ BT_DBG("Current tiocm 0x%x", status);
+
+ set |= (TIOCM_OUT2 | TIOCM_RTS);
+ clear = ~set;
+ set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ status = tty->driver->ops->tiocmset(tty, set, clear);
+ BT_DBG("Setting RTS: %s", status ? "failed" : "success");
+
+ /* Re-enable hardware flow control */
+ ktermios = tty->termios;
+ ktermios.c_cflag |= CRTSCTS;
+ status = tty_set_termios(tty, &ktermios);
+ BT_DBG("Enabling hardware flow control: %s",
+ status ? "failed" : "success");
+ }
+}
+
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+ unsigned int oper_speed)
+{
+ hu->init_speed = init_speed;
+ hu->oper_speed = oper_speed;
+}
+
+void hci_uart_init_tty(struct hci_uart *hu)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+
+ /* Bring the UART into a known 8 bits no parity hw fc state */
+ ktermios = tty->termios;
+ ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
+ INLCR | IGNCR | ICRNL | IXON);
+ ktermios.c_oflag &= ~OPOST;
+ ktermios.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
+ ktermios.c_cflag &= ~(CSIZE | PARENB);
+ ktermios.c_cflag |= CS8;
+ ktermios.c_cflag |= CRTSCTS;
+
+ /* tty_set_termios() return not checked as it is always 0 */
+ tty_set_termios(tty, &ktermios);
+}
+
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+
+ ktermios = tty->termios;
+ ktermios.c_cflag &= ~CBAUD;
+ tty_termios_encode_baud_rate(&ktermios, speed, speed);
+
+ /* tty_set_termios() return not checked as it is always 0 */
+ tty_set_termios(tty, &ktermios);
+
+ BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name,
+ tty->termios.c_ispeed, tty->termios.c_ospeed);
+}
+
static int hci_uart_setup(struct hci_dev *hdev)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct hci_rp_read_local_version *ver;
struct sk_buff *skb;
+ unsigned int speed;
+ int err;
+
+ /* Init speed if any */
+ if (hu->init_speed)
+ speed = hu->init_speed;
+ else if (hu->proto->init_speed)
+ speed = hu->proto->init_speed;
+ else
+ speed = 0;
+
+ if (speed)
+ hci_uart_set_baudrate(hu, speed);
+
+ /* Operational speed if any */
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+ else
+ speed = 0;
+
+ if (hu->proto->set_baudrate && speed) {
+ err = hu->proto->set_baudrate(hu, speed);
+ if (!err)
+ hci_uart_set_baudrate(hu, speed);
+ }
if (hu->proto->setup)
return hu->proto->setup(hu);
@@ -347,8 +461,6 @@ static int hci_uart_tty_open(struct tty_struct *tty)
INIT_WORK(&hu->init_ready, hci_uart_init_work);
INIT_WORK(&hu->write_work, hci_uart_write_work);
- spin_lock_init(&hu->rx_lock);
-
/* Flush any pending characters in the driver and line discipline. */
/* FIXME: why is this needed. Note don't use ldisc_ref here as the
@@ -446,14 +558,14 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
if (!test_bit(HCI_UART_PROTO_SET, &hu->flags))
return;
- spin_lock(&hu->rx_lock);
+ /* It does not need a lock here as it is already protected by a mutex in
+ * tty caller
+ */
hu->proto->recv(hu, data, count);
if (hu->hdev)
hu->hdev->stat.byte_rx += count;
- spin_unlock(&hu->rx_lock);
-
tty_unthrottle(tty);
}
@@ -475,6 +587,13 @@ static int hci_uart_register_dev(struct hci_uart *hu)
hdev->bus = HCI_UART;
hci_set_drvdata(hdev, hu);
+ /* Only when vendor specific setup callback is provided, consider
+ * the manufacturer information valid. This avoids filling in the
+ * value for Ericsson when nothing is specified.
+ */
+ if (hu->proto->setup)
+ hdev->manufacturer = hu->proto->manufacturer;
+
hdev->open = hci_uart_open;
hdev->close = hci_uart_close;
hdev->flush = hci_uart_flush;
@@ -647,7 +766,7 @@ static int __init hci_uart_init(void)
/* Register the tty discipline */
- memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
+ memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
hci_uart_ldisc.name = "n_hci";
hci_uart_ldisc.open = hci_uart_tty_open;
@@ -681,9 +800,15 @@ static int __init hci_uart_init(void)
#ifdef CONFIG_BT_HCIUART_3WIRE
h5_init();
#endif
+#ifdef CONFIG_BT_HCIUART_INTEL
+ intel_init();
+#endif
#ifdef CONFIG_BT_HCIUART_BCM
bcm_init();
#endif
+#ifdef CONFIG_BT_HCIUART_QCA
+ qca_init();
+#endif
return 0;
}
@@ -707,9 +832,15 @@ static void __exit hci_uart_exit(void)
#ifdef CONFIG_BT_HCIUART_3WIRE
h5_deinit();
#endif
+#ifdef CONFIG_BT_HCIUART_INTEL
+ intel_deinit();
+#endif
#ifdef CONFIG_BT_HCIUART_BCM
bcm_deinit();
#endif
+#ifdef CONFIG_BT_HCIUART_QCA
+ qca_deinit();
+#endif
/* Release tty registration of line discipline */
err = tty_unregister_ldisc(N_HCI);