diff options
Diffstat (limited to 'kernel/drivers/ata')
31 files changed, 1466 insertions, 315 deletions
diff --git a/kernel/drivers/ata/Kconfig b/kernel/drivers/ata/Kconfig index 9dca4b995..6aaa3f817 100644 --- a/kernel/drivers/ata/Kconfig +++ b/kernel/drivers/ata/Kconfig @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR config ATA_ACPI bool "ATA ACPI Support" - depends on ACPI && PCI + depends on ACPI default y help This option adds support for ATA-related ACPI objects. @@ -98,6 +98,15 @@ config SATA_AHCI_PLATFORM If unsure, say N. +config AHCI_BRCMSTB + tristate "Broadcom STB AHCI SATA support" + depends on ARCH_BRCMSTB + help + This option enables support for the AHCI SATA3 controller found on + STB SoC's. + + If unsure, say N. + config AHCI_DA850 tristate "DaVinci DA850 AHCI SATA support" depends on ARCH_DAVINCI_DA850 @@ -124,6 +133,15 @@ config AHCI_IMX If unsure, say N. +config AHCI_CEVA + tristate "CEVA AHCI SATA support" + depends on OF + help + This option enables support for the CEVA AHCI SATA. + It can be found on the Xilinx Zynq UltraScale+ MPSoC. + + If unsure, say N. + config AHCI_MVEBU tristate "Marvell EBU AHCI SATA support" depends on ARCH_MVEBU @@ -157,6 +175,15 @@ config AHCI_XGENE help This option enables support for APM X-Gene SoC SATA host controller. +config AHCI_QORIQ + tristate "Freescale QorIQ AHCI SATA support" + depends on OF + help + This option enables support for the Freescale QorIQ AHCI SoC's + onboard AHCI SATA. + + If unsure, say N. + config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC @@ -827,7 +854,6 @@ config PATA_AT32 config PATA_AT91 tristate "PATA support for AT91SAM9260" depends on ARM && SOC_AT91SAM9 - depends on !ARCH_MULTIPLATFORM help This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. diff --git a/kernel/drivers/ata/Makefile b/kernel/drivers/ata/Makefile index 40f7865f2..af45effac 100644 --- a/kernel/drivers/ata/Makefile +++ b/kernel/drivers/ata/Makefile @@ -10,6 +10,8 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o +obj-$(CONFIG_AHCI_BRCMSTB) += ahci_brcmstb.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o @@ -17,6 +19,7 @@ obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_QORIQ) += ahci_qoriq.o libahci.o libahci_platform.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o diff --git a/kernel/drivers/ata/acard-ahci.c b/kernel/drivers/ata/acard-ahci.c index 12489ce86..ed6a30cd6 100644 --- a/kernel/drivers/ata/acard-ahci.c +++ b/kernel/drivers/ata/acard-ahci.c @@ -433,6 +433,8 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; + + hpriv->irq = pdev->irq; hpriv->flags |= (unsigned long)pi.private_data; if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) @@ -498,7 +500,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id acard_ahci_pci_print_info(host); pci_set_master(pdev); - return ahci_host_activate(host, pdev->irq, &acard_ahci_sht); + return ahci_host_activate(host, &acard_ahci_sht); } module_pci_driver(acard_ahci_pci_driver); diff --git a/kernel/drivers/ata/ahci.c b/kernel/drivers/ata/ahci.c index e6ea912ae..60a15831c 100644 --- a/kernel/drivers/ata/ahci.c +++ b/kernel/drivers/ata/ahci.c @@ -42,6 +42,7 @@ #include <linux/device.h> #include <linux/dmi.h> #include <linux/gfp.h> +#include <linux/msi.h> #include <scsi/scsi_host.h> #include <scsi/scsi_cmnd.h> #include <linux/libata.h> @@ -52,6 +53,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_CAVIUM = 0, AHCI_PCI_BAR_ENMOTUS = 2, AHCI_PCI_BAR_STANDARD = 5, }; @@ -262,6 +264,26 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x19b0), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19b1), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19b2), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19b3), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19b4), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19b5), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19b6), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19b7), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19bE), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19bF), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19c0), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19c1), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19c2), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19c3), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19c4), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19c5), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19c6), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19c7), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19cE), board_ahci }, /* DNV AHCI */ + { PCI_VDEVICE(INTEL, 0x19cF), board_ahci }, /* DNV AHCI */ { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */ { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */ { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */ @@ -338,10 +360,28 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */ { PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */ { PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0xa102), board_ahci }, /* Sunrise Point-H AHCI */ { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */ { PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0xa106), board_ahci }, /* Sunrise Point-H RAID */ { PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */ { PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Lewisburg AHCI*/ + { PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa182), board_ahci }, /* Lewisburg AHCI*/ + { PCI_VDEVICE(INTEL, 0xa184), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa186), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa18e), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa1d2), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa1d6), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa202), board_ahci }, /* Lewisburg AHCI*/ + { PCI_VDEVICE(INTEL, 0xa204), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -487,6 +527,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0), .driver_data = board_ahci_yes_fbs }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a2), /* 88se91a2 */ + .driver_data = board_ahci_yes_fbs }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), .driver_data = board_ahci_yes_fbs }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230), @@ -1289,17 +1331,60 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) {} #endif -static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, - struct ahci_host_priv *hpriv) +/* + * ahci_init_msix() only implements single MSI-X support, not multiple + * MSI-X per-port interrupts. This is needed for host controllers that only + * have MSI-X support implemented, but no MSI or intx. + */ +static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports, + struct ahci_host_priv *hpriv) +{ + int rc, nvec; + struct msix_entry entry = {}; + + /* Do not init MSI-X if MSI is disabled for the device */ + if (hpriv->flags & AHCI_HFLAG_NO_MSI) + return -ENODEV; + + nvec = pci_msix_vec_count(pdev); + if (nvec < 0) + return nvec; + + if (!nvec) { + rc = -ENODEV; + goto fail; + } + + /* + * There can be more than one vector (e.g. for error detection or + * hdd hotplug). Only the first vector (entry.entry = 0) is used. + */ + rc = pci_enable_msix_exact(pdev, &entry, 1); + if (rc < 0) + goto fail; + + hpriv->irq = entry.vector; + + return 1; +fail: + dev_err(&pdev->dev, + "failed to enable MSI-X with error %d, # of vectors: %d\n", + rc, nvec); + + return rc; +} + +static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports, + struct ahci_host_priv *hpriv) { int rc, nvec; if (hpriv->flags & AHCI_HFLAG_NO_MSI) - goto intx; + return -ENODEV; nvec = pci_msi_vec_count(pdev); if (nvec < 0) - goto intx; + return nvec; /* * If number of MSIs is less than number of ports then Sharing Last @@ -1312,8 +1397,8 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, rc = pci_enable_msi_exact(pdev, nvec); if (rc == -ENOSPC) goto single_msi; - else if (rc < 0) - goto intx; + if (rc < 0) + return rc; /* fallback to single MSI mode if the controller enforced MRSM mode */ if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) { @@ -1325,15 +1410,42 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, if (nvec > 1) hpriv->flags |= AHCI_HFLAG_MULTI_MSI; - return nvec; + goto out; single_msi: - if (pci_enable_msi(pdev)) - goto intx; - return 1; + nvec = 1; + + rc = pci_enable_msi(pdev); + if (rc < 0) + return rc; +out: + hpriv->irq = pdev->irq; + + return nvec; +} -intx: +static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, + struct ahci_host_priv *hpriv) +{ + int nvec; + + nvec = ahci_init_msi(pdev, n_ports, hpriv); + if (nvec >= 0) + return nvec; + + /* + * Currently, MSI-X support only implements single IRQ mode and + * exists for controllers which can't do other types of IRQ. Only + * set it up if MSI fails. + */ + nvec = ahci_init_msix(pdev, n_ports, hpriv); + if (nvec >= 0) + return nvec; + + /* lagacy intx interrupts */ pci_intx(pdev, 1); + hpriv->irq = pdev->irq; + return 0; } @@ -1372,11 +1484,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev_info(&pdev->dev, "PDC42819 can only drive SATA devices with this driver\n"); - /* Both Connext and Enmotus devices use non-standard BARs */ + /* Some devices use non-standard BARs */ if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; + else if (pdev->vendor == 0x177d && pdev->device == 0xa01c) + ahci_pci_bar = AHCI_PCI_BAR_CAVIUM; /* acquire resources */ rc = pcim_enable_device(pdev); @@ -1486,13 +1600,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) */ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); - ahci_init_interrupts(pdev, n_ports, hpriv); - host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); if (!host) return -ENOMEM; host->private_data = hpriv; + ahci_init_interrupts(pdev, n_ports, hpriv); + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; else @@ -1538,7 +1652,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); - return ahci_host_activate(host, pdev->irq, &ahci_sht); + return ahci_host_activate(host, &ahci_sht); } module_pci_driver(ahci_pci_driver); diff --git a/kernel/drivers/ata/ahci.h b/kernel/drivers/ata/ahci.h index 71262e086..45586c1db 100644 --- a/kernel/drivers/ata/ahci.h +++ b/kernel/drivers/ata/ahci.h @@ -181,6 +181,8 @@ enum { PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ + PORT_CMD_ESP = (1 << 21), /* External Sata Port */ + PORT_CMD_HPCP = (1 << 18), /* HotPlug Capable Port */ PORT_CMD_PMP = (1 << 17), /* PMP attached */ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ @@ -238,6 +240,8 @@ enum { AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */ AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */ AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */ + AHCI_HFLAG_EDGE_IRQ = (1 << 19), /* HOST_IRQ_STAT behaves as + Edge Triggered */ /* ap->flags bits */ @@ -341,6 +345,7 @@ struct ahci_host_priv { struct phy **phys; unsigned nports; /* Number of ports */ void *plat_data; /* Other platform data */ + unsigned int irq; /* interrupt line */ /* * Optional ahci_start_engine override, if not set this gets set to the * default ahci_start_engine during ahci_save_initial_config, this can @@ -393,8 +398,7 @@ void ahci_set_em_messages(struct ahci_host_priv *hpriv, struct ata_port_info *pi); int ahci_reset_em(struct ata_host *host); void ahci_print_info(struct ata_host *host, const char *scc_s); -int ahci_host_activate(struct ata_host *host, int irq, - struct scsi_host_template *sht); +int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht); void ahci_error_handler(struct ata_port *ap); static inline void __iomem *__ahci_port_base(struct ata_host *host, diff --git a/kernel/drivers/ata/ahci_brcmstb.c b/kernel/drivers/ata/ahci_brcmstb.c new file mode 100644 index 000000000..14b7305d2 --- /dev/null +++ b/kernel/drivers/ata/ahci_brcmstb.c @@ -0,0 +1,324 @@ +/* + * Broadcom SATA3 AHCI Controller Driver + * + * Copyright © 2009-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/ahci_platform.h> +#include <linux/compiler.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/libata.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/string.h> + +#include "ahci.h" + +#define DRV_NAME "brcm-ahci" + +#define SATA_TOP_CTRL_VERSION 0x0 +#define SATA_TOP_CTRL_BUS_CTRL 0x4 + #define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */ + #define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */ + #define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */ + #define PIODATA_ENDIAN_SHIFT 6 + #define ENDIAN_SWAP_NONE 0 + #define ENDIAN_SWAP_FULL 2 + #define OVERRIDE_HWINIT BIT(16) +#define SATA_TOP_CTRL_TP_CTRL 0x8 +#define SATA_TOP_CTRL_PHY_CTRL 0xc + #define SATA_TOP_CTRL_PHY_CTRL_1 0x0 + #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14) + #define SATA_TOP_CTRL_PHY_CTRL_2 0x4 + #define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0) + #define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1) + #define SATA_TOP_CTRL_2_SW_RST_RX BIT(2) + #define SATA_TOP_CTRL_2_SW_RST_TX BIT(3) + #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14) + #define SATA_TOP_CTRL_PHY_OFFS 0x8 + #define SATA_TOP_MAX_PHYS 2 +#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c +#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20 + +/* On big-endian MIPS, buses are reversed to big endian, so switch them back */ +#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN) +#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */ +#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */ +#else +#define DATA_ENDIAN 0 +#define MMIO_ENDIAN 0 +#endif + +#define BUS_CTRL_ENDIAN_CONF \ + ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \ + (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \ + (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT)) + +struct brcm_ahci_priv { + struct device *dev; + void __iomem *top_ctrl; + u32 port_mask; +}; + +static const struct ata_port_info ahci_brcm_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static inline u32 brcm_sata_readreg(void __iomem *addr) +{ + /* + * MIPS endianness is configured by boot strap, which also reverses all + * bus endianness (i.e., big-endian CPU + big endian bus ==> native + * endian I/O). + * + * Other architectures (e.g., ARM) either do not support big endian, or + * else leave I/O in little endian mode. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + return __raw_readl(addr); + else + return readl_relaxed(addr); +} + +static inline void brcm_sata_writereg(u32 val, void __iomem *addr) +{ + /* See brcm_sata_readreg() comments */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + __raw_writel(val, addr); + else + writel_relaxed(val, addr); +} + +static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port) +{ + void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL + + (port * SATA_TOP_CTRL_PHY_OFFS); + void __iomem *p; + u32 reg; + + /* clear PHY_DEFAULT_POWER_STATE */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1; + reg = brcm_sata_readreg(p); + reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE; + brcm_sata_writereg(reg, p); + + /* reset the PHY digital logic */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2; + reg = brcm_sata_readreg(p); + reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB | + SATA_TOP_CTRL_2_SW_RST_RX); + reg |= SATA_TOP_CTRL_2_SW_RST_TX; + brcm_sata_writereg(reg, p); + reg = brcm_sata_readreg(p); + reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET; + brcm_sata_writereg(reg, p); + reg = brcm_sata_readreg(p); + reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET; + brcm_sata_writereg(reg, p); + (void)brcm_sata_readreg(p); +} + +static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port) +{ + void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL + + (port * SATA_TOP_CTRL_PHY_OFFS); + void __iomem *p; + u32 reg; + + /* power-off the PHY digital logic */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2; + reg = brcm_sata_readreg(p); + reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB | + SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX | + SATA_TOP_CTRL_2_PHY_GLOBAL_RESET); + brcm_sata_writereg(reg, p); + + /* set PHY_DEFAULT_POWER_STATE */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1; + reg = brcm_sata_readreg(p); + reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE; + brcm_sata_writereg(reg, p); +} + +static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv) +{ + int i; + + for (i = 0; i < SATA_TOP_MAX_PHYS; i++) + if (priv->port_mask & BIT(i)) + brcm_sata_phy_enable(priv, i); +} + +static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv) +{ + int i; + + for (i = 0; i < SATA_TOP_MAX_PHYS; i++) + if (priv->port_mask & BIT(i)) + brcm_sata_phy_disable(priv, i); +} + +static u32 brcm_ahci_get_portmask(struct platform_device *pdev, + struct brcm_ahci_priv *priv) +{ + void __iomem *ahci; + struct resource *res; + u32 impl; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci"); + ahci = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ahci)) + return 0; + + impl = readl(ahci + HOST_PORTS_IMPL); + + if (fls(impl) > SATA_TOP_MAX_PHYS) + dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n", + impl); + else if (!impl) + dev_info(priv->dev, "no ports found\n"); + + devm_iounmap(&pdev->dev, ahci); + devm_release_mem_region(&pdev->dev, res->start, resource_size(res)); + + return impl; +} + +static void brcm_sata_init(struct brcm_ahci_priv *priv) +{ + /* Configure endianness */ + brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, + priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); +} + +#ifdef CONFIG_PM_SLEEP +static int brcm_ahci_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + int ret; + + ret = ahci_platform_suspend(dev); + brcm_sata_phys_disable(priv); + return ret; +} + +static int brcm_ahci_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + + brcm_sata_init(priv); + brcm_sata_phys_enable(priv); + return ahci_platform_resume(dev); +} +#endif + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int brcm_ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct brcm_ahci_priv *priv; + struct ahci_host_priv *hpriv; + struct resource *res; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl"); + priv->top_ctrl = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->top_ctrl)) + return PTR_ERR(priv->top_ctrl); + + brcm_sata_init(priv); + + priv->port_mask = brcm_ahci_get_portmask(pdev, priv); + if (!priv->port_mask) + return -ENODEV; + + brcm_sata_phys_enable(priv); + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + hpriv->plat_data = priv; + + ret = ahci_platform_enable_resources(hpriv); + if (ret) + return ret; + + ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info, + &ahci_platform_sht); + if (ret) + return ret; + + dev_info(dev, "Broadcom AHCI SATA3 registered\n"); + + return 0; +} + +static int brcm_ahci_remove(struct platform_device *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + int ret; + + ret = ata_platform_remove_one(pdev); + if (ret) + return ret; + + brcm_sata_phys_disable(priv); + + return 0; +} + +static const struct of_device_id ahci_of_match[] = { + {.compatible = "brcm,bcm7445-ahci"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_of_match); + +static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume); + +static struct platform_driver brcm_ahci_driver = { + .probe = brcm_ahci_probe, + .remove = brcm_ahci_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_of_match, + .pm = &ahci_brcm_pm_ops, + }, +}; +module_platform_driver(brcm_ahci_driver); + +MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver"); +MODULE_AUTHOR("Brian Norris"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sata-brcmstb"); diff --git a/kernel/drivers/ata/ahci_ceva.c b/kernel/drivers/ata/ahci_ceva.c new file mode 100644 index 000000000..207649d32 --- /dev/null +++ b/kernel/drivers/ata/ahci_ceva.c @@ -0,0 +1,238 @@ +/* + * Copyright (C) 2015 Xilinx, Inc. + * CEVA AHCI SATA platform driver + * + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/ahci_platform.h> +#include <linux/kernel.h> +#include <linux/libata.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include "ahci.h" + +/* Vendor Specific Register Offsets */ +#define AHCI_VEND_PCFG 0xA4 +#define AHCI_VEND_PPCFG 0xA8 +#define AHCI_VEND_PP2C 0xAC +#define AHCI_VEND_PP3C 0xB0 +#define AHCI_VEND_PP4C 0xB4 +#define AHCI_VEND_PP5C 0xB8 +#define AHCI_VEND_PAXIC 0xC0 +#define AHCI_VEND_PTC 0xC8 + +/* Vendor Specific Register bit definitions */ +#define PAXIC_ADBW_BW64 0x1 +#define PAXIC_MAWIDD (1 << 8) +#define PAXIC_MARIDD (1 << 16) +#define PAXIC_OTL (0x4 << 20) + +#define PCFG_TPSS_VAL (0x32 << 16) +#define PCFG_TPRS_VAL (0x2 << 12) +#define PCFG_PAD_VAL 0x2 + +#define PPCFG_TTA 0x1FFFE +#define PPCFG_PSSO_EN (1 << 28) +#define PPCFG_PSS_EN (1 << 29) +#define PPCFG_ESDF_EN (1 << 31) + +#define PP2C_CIBGMN 0x0F +#define PP2C_CIBGMX (0x25 << 8) +#define PP2C_CIBGN (0x18 << 16) +#define PP2C_CINMP (0x29 << 24) + +#define PP3C_CWBGMN 0x04 +#define PP3C_CWBGMX (0x0B << 8) +#define PP3C_CWBGN (0x08 << 16) +#define PP3C_CWNMP (0x0F << 24) + +#define PP4C_BMX 0x0a +#define PP4C_BNM (0x08 << 8) +#define PP4C_SFD (0x4a << 16) +#define PP4C_PTST (0x06 << 24) + +#define PP5C_RIT 0x60216 +#define PP5C_RCT (0x7f0 << 20) + +#define PTC_RX_WM_VAL 0x40 +#define PTC_RSVD (1 << 27) + +#define PORT0_BASE 0x100 +#define PORT1_BASE 0x180 + +/* Port Control Register Bit Definitions */ +#define PORT_SCTL_SPD_GEN2 (0x2 << 4) +#define PORT_SCTL_SPD_GEN1 (0x1 << 4) +#define PORT_SCTL_IPM (0x3 << 8) + +#define PORT_BASE 0x100 +#define PORT_OFFSET 0x80 +#define NR_PORTS 2 +#define DRV_NAME "ahci-ceva" +#define CEVA_FLAG_BROKEN_GEN2 1 + +struct ceva_ahci_priv { + struct platform_device *ahci_pdev; + int flags; +}; + +static struct ata_port_operations ahci_ceva_ops = { + .inherits = &ahci_platform_ops, +}; + +static const struct ata_port_info ahci_ceva_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ceva_ops, +}; + +static void ahci_ceva_setup(struct ahci_host_priv *hpriv) +{ + void __iomem *mmio = hpriv->mmio; + struct ceva_ahci_priv *cevapriv = hpriv->plat_data; + u32 tmp; + int i; + + /* + * AXI Data bus width to 64 + * Set Mem Addr Read, Write ID for data transfers + * Transfer limit to 72 DWord + */ + tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL; + writel(tmp, mmio + AHCI_VEND_PAXIC); + + /* Set AHCI Enable */ + tmp = readl(mmio + HOST_CTL); + tmp |= HOST_AHCI_EN; + writel(tmp, mmio + HOST_CTL); + + for (i = 0; i < NR_PORTS; i++) { + /* TPSS TPRS scalars, CISE and Port Addr */ + tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i); + writel(tmp, mmio + AHCI_VEND_PCFG); + + /* Port Phy Cfg register enables */ + tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN; + writel(tmp, mmio + AHCI_VEND_PPCFG); + + /* Phy Control OOB timing parameters COMINIT */ + tmp = PP2C_CIBGMN | PP2C_CIBGMX | PP2C_CIBGN | PP2C_CINMP; + writel(tmp, mmio + AHCI_VEND_PP2C); + + /* Phy Control OOB timing parameters COMWAKE */ + tmp = PP3C_CWBGMN | PP3C_CWBGMX | PP3C_CWBGN | PP3C_CWNMP; + writel(tmp, mmio + AHCI_VEND_PP3C); + + /* Phy Control Burst timing setting */ + tmp = PP4C_BMX | PP4C_BNM | PP4C_SFD | PP4C_PTST; + writel(tmp, mmio + AHCI_VEND_PP4C); + + /* Rate Change Timer and Retry Interval Timer setting */ + tmp = PP5C_RIT | PP5C_RCT; + writel(tmp, mmio + AHCI_VEND_PP5C); + + /* Rx Watermark setting */ + tmp = PTC_RX_WM_VAL | PTC_RSVD; + writel(tmp, mmio + AHCI_VEND_PTC); + + /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */ + tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM; + if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2) + tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM; + writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i); + } +} + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int ceva_ahci_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ceva_ahci_priv *cevapriv; + int rc; + + cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL); + if (!cevapriv) + return -ENOMEM; + + cevapriv->ahci_pdev = pdev; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + if (of_property_read_bool(np, "ceva,broken-gen2")) + cevapriv->flags = CEVA_FLAG_BROKEN_GEN2; + + hpriv->plat_data = cevapriv; + + /* CEVA specific initialization */ + ahci_ceva_setup(hpriv); + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info, + &ahci_platform_sht); + if (rc) + goto disable_resources; + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +static int __maybe_unused ceva_ahci_suspend(struct device *dev) +{ + return ahci_platform_suspend_host(dev); +} + +static int __maybe_unused ceva_ahci_resume(struct device *dev) +{ + return ahci_platform_resume_host(dev); +} + +static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume); + +static const struct of_device_id ceva_ahci_of_match[] = { + { .compatible = "ceva,ahci-1v84" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ceva_ahci_of_match); + +static struct platform_driver ceva_ahci_driver = { + .probe = ceva_ahci_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = ceva_ahci_of_match, + .pm = &ahci_ceva_pm_ops, + }, +}; +module_platform_driver(ceva_ahci_driver); + +MODULE_DESCRIPTION("CEVA AHCI SATA platform driver"); +MODULE_AUTHOR("Xilinx Inc."); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/ata/ahci_mvebu.c b/kernel/drivers/ata/ahci_mvebu.c index 5928d0746..f7a7fa817 100644 --- a/kernel/drivers/ata/ahci_mvebu.c +++ b/kernel/drivers/ata/ahci_mvebu.c @@ -62,6 +62,31 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); } +#ifdef CONFIG_PM_SLEEP +static int ahci_mvebu_suspend(struct platform_device *pdev, pm_message_t state) +{ + return ahci_platform_suspend_host(&pdev->dev); +} + +static int ahci_mvebu_resume(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct ahci_host_priv *hpriv = host->private_data; + const struct mbus_dram_target_info *dram; + + dram = mv_mbus_dram_info(); + if (dram) + ahci_mvebu_mbus_config(hpriv, dram); + + ahci_mvebu_regret_option(hpriv); + + return ahci_platform_resume_host(&pdev->dev); +} +#else +#define ahci_mvebu_suspend NULL +#define ahci_mvebu_resume NULL +#endif + static const struct ata_port_info ahci_mvebu_port_info = { .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, @@ -120,6 +145,8 @@ MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match); static struct platform_driver ahci_mvebu_driver = { .probe = ahci_mvebu_probe, .remove = ata_platform_remove_one, + .suspend = ahci_mvebu_suspend, + .resume = ahci_mvebu_resume, .driver = { .name = DRV_NAME, .of_match_table = ahci_mvebu_of_match, diff --git a/kernel/drivers/ata/ahci_platform.c b/kernel/drivers/ata/ahci_platform.c index 78d6ae0b9..04975b851 100644 --- a/kernel/drivers/ata/ahci_platform.c +++ b/kernel/drivers/ata/ahci_platform.c @@ -20,6 +20,8 @@ #include <linux/platform_device.h> #include <linux/libata.h> #include <linux/ahci_platform.h> +#include <linux/acpi.h> +#include <linux/pci_ids.h> #include "ahci.h" #define DRV_NAME "ahci" @@ -78,12 +80,19 @@ static const struct of_device_id ahci_of_match[] = { }; MODULE_DEVICE_TABLE(of, ahci_of_match); +static const struct acpi_device_id ahci_acpi_match[] = { + { ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, ahci_acpi_match); + static struct platform_driver ahci_driver = { .probe = ahci_probe, .remove = ata_platform_remove_one, .driver = { .name = DRV_NAME, .of_match_table = ahci_of_match, + .acpi_match_table = ahci_acpi_match, .pm = &ahci_pm_ops, }, }; diff --git a/kernel/drivers/ata/ahci_qoriq.c b/kernel/drivers/ata/ahci_qoriq.c new file mode 100644 index 000000000..d0f9de96e --- /dev/null +++ b/kernel/drivers/ata/ahci_qoriq.c @@ -0,0 +1,279 @@ +/* + * Freescale QorIQ AHCI SATA platform driver + * + * Copyright 2015 Freescale, Inc. + * Tang Yuantian <Yuantian.Tang@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/ahci_platform.h> +#include <linux/device.h> +#include <linux/of_address.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/libata.h> +#include "ahci.h" + +#define DRV_NAME "ahci-qoriq" + +/* port register definition */ +#define PORT_PHY1 0xA8 +#define PORT_PHY2 0xAC +#define PORT_PHY3 0xB0 +#define PORT_PHY4 0xB4 +#define PORT_PHY5 0xB8 +#define PORT_TRANS 0xC8 + +/* port register default value */ +#define AHCI_PORT_PHY_1_CFG 0xa003fffe +#define AHCI_PORT_PHY_2_CFG 0x28183411 +#define AHCI_PORT_PHY_3_CFG 0x0e081004 +#define AHCI_PORT_PHY_4_CFG 0x00480811 +#define AHCI_PORT_PHY_5_CFG 0x192c96a4 +#define AHCI_PORT_TRANS_CFG 0x08000025 + +#define SATA_ECC_DISABLE 0x00020000 + +enum ahci_qoriq_type { + AHCI_LS1021A, + AHCI_LS1043A, + AHCI_LS2080A, +}; + +struct ahci_qoriq_priv { + struct ccsr_ahci *reg_base; + enum ahci_qoriq_type type; + void __iomem *ecc_addr; +}; + +static const struct of_device_id ahci_qoriq_of_match[] = { + { .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A}, + { .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A}, + { .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A}, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match); + +static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + void __iomem *port_mmio = ahci_port_base(link->ap); + u32 px_cmd, px_is, px_val; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + int rc; + bool ls1021a_workaround = (qoriq_priv->type == AHCI_LS1021A); + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + /* + * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: + * A-009042: The device detection initialization sequence + * mistakenly resets some registers. + * + * Workaround for this is: + * The software should read and store PxCMD and PxIS values + * before issuing the device detection initialization sequence. + * After the sequence is complete, software should restore the + * PxCMD and PxIS with the stored values. + */ + if (ls1021a_workaround) { + px_cmd = readl(port_mmio + PORT_CMD); + px_is = readl(port_mmio + PORT_IRQ_STAT); + } + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + /* restore the PxCMD and PxIS on ls1021 */ + if (ls1021a_workaround) { + px_val = readl(port_mmio + PORT_CMD); + if (px_val != px_cmd) + writel(px_cmd, port_mmio + PORT_CMD); + + px_val = readl(port_mmio + PORT_IRQ_STAT); + if (px_val != px_is) + writel(px_is, port_mmio + PORT_IRQ_STAT); + } + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + +static struct ata_port_operations ahci_qoriq_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_qoriq_hardreset, +}; + +static struct ata_port_info ahci_qoriq_port_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_qoriq_ops, +}; + +static struct scsi_host_template ahci_qoriq_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) +{ + struct ahci_qoriq_priv *qpriv = hpriv->plat_data; + void __iomem *reg_base = hpriv->mmio; + + switch (qpriv->type) { + case AHCI_LS1021A: + writel(SATA_ECC_DISABLE, qpriv->ecc_addr); + writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_PHY_2_CFG, reg_base + PORT_PHY2); + writel(AHCI_PORT_PHY_3_CFG, reg_base + PORT_PHY3); + writel(AHCI_PORT_PHY_4_CFG, reg_base + PORT_PHY4); + writel(AHCI_PORT_PHY_5_CFG, reg_base + PORT_PHY5); + writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + break; + + case AHCI_LS1043A: + case AHCI_LS2080A: + writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + break; + } + + return 0; +} + +static int ahci_qoriq_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ahci_qoriq_priv *qoriq_priv; + const struct of_device_id *of_id; + struct resource *res; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + of_id = of_match_node(ahci_qoriq_of_match, np); + if (!of_id) + return -ENODEV; + + qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL); + if (!qoriq_priv) + return -ENOMEM; + + qoriq_priv->type = (enum ahci_qoriq_type)of_id->data; + + if (qoriq_priv->type == AHCI_LS1021A) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "sata-ecc"); + qoriq_priv->ecc_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(qoriq_priv->ecc_addr)) + return PTR_ERR(qoriq_priv->ecc_addr); + } + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + hpriv->plat_data = qoriq_priv; + rc = ahci_qoriq_phy_init(hpriv); + if (rc) + goto disable_resources; + + /* Workaround for ls2080a */ + if (qoriq_priv->type == AHCI_LS2080A) { + hpriv->flags |= AHCI_HFLAG_NO_NCQ; + ahci_qoriq_port_info.flags &= ~ATA_FLAG_NCQ; + } + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info, + &ahci_qoriq_sht); + if (rc) + goto disable_resources; + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} + +#ifdef CONFIG_PM_SLEEP +static int ahci_qoriq_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + rc = ahci_qoriq_phy_init(hpriv); + if (rc) + goto disable_resources; + + rc = ahci_platform_resume_host(dev); + if (rc) + goto disable_resources; + + /* We resumed so update PM runtime state */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} +#endif + +static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend, + ahci_qoriq_resume); + +static struct platform_driver ahci_qoriq_driver = { + .probe = ahci_qoriq_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_qoriq_of_match, + .pm = &ahci_qoriq_pm_ops, + }, +}; +module_platform_driver(ahci_qoriq_driver); + +MODULE_DESCRIPTION("Freescale QorIQ AHCI SATA platform driver"); +MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/ata/ahci_xgene.c b/kernel/drivers/ata/ahci_xgene.c index 2b78510d9..e2c6d9e0c 100644 --- a/kernel/drivers/ata/ahci_xgene.c +++ b/kernel/drivers/ata/ahci_xgene.c @@ -27,6 +27,7 @@ #include <linux/platform_device.h> #include <linux/ahci_platform.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/phy/phy.h> #include "ahci.h" @@ -84,6 +85,11 @@ /* Max retry for link down */ #define MAX_LINK_DOWN_RETRY 3 +enum xgene_ahci_version { + XGENE_AHCI_V1 = 1, + XGENE_AHCI_V2, +}; + struct xgene_ahci_context { struct ahci_host_priv *hpriv; struct device *dev; @@ -542,7 +548,7 @@ softreset_retry: return rc; } -static struct ata_port_operations xgene_ahci_ops = { +static struct ata_port_operations xgene_ahci_v1_ops = { .inherits = &ahci_ops, .host_stop = xgene_ahci_host_stop, .hardreset = xgene_ahci_hardreset, @@ -552,11 +558,25 @@ static struct ata_port_operations xgene_ahci_ops = { .pmp_softreset = xgene_ahci_pmp_softreset }; -static const struct ata_port_info xgene_ahci_port_info = { +static const struct ata_port_info xgene_ahci_v1_port_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &xgene_ahci_v1_ops, +}; + +static struct ata_port_operations xgene_ahci_v2_ops = { + .inherits = &ahci_ops, + .host_stop = xgene_ahci_host_stop, + .hardreset = xgene_ahci_hardreset, + .read_id = xgene_ahci_read_id, +}; + +static const struct ata_port_info xgene_ahci_v2_port_info = { .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, - .port_ops = &xgene_ahci_ops, + .port_ops = &xgene_ahci_v2_ops, }; static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv) @@ -629,12 +649,32 @@ static struct scsi_host_template ahci_platform_sht = { AHCI_SHT(DRV_NAME), }; +#ifdef CONFIG_ACPI +static const struct acpi_device_id xgene_ahci_acpi_match[] = { + { "APMC0D0D", XGENE_AHCI_V1}, + { "APMC0D32", XGENE_AHCI_V2}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); +#endif + +static const struct of_device_id xgene_ahci_of_match[] = { + {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, + {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); + static int xgene_ahci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; struct xgene_ahci_context *ctx; struct resource *res; + const struct of_device_id *of_devid; + enum xgene_ahci_version version = XGENE_AHCI_V1; + const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, + &xgene_ahci_v2_port_info }; int rc; hpriv = ahci_platform_get_resources(pdev); @@ -677,6 +717,35 @@ static int xgene_ahci_probe(struct platform_device *pdev) ctx->csr_mux = csr; } + of_devid = of_match_device(xgene_ahci_of_match, dev); + if (of_devid) { + if (of_devid->data) + version = (enum xgene_ahci_version) of_devid->data; + } +#ifdef CONFIG_ACPI + else { + const struct acpi_device_id *acpi_id; + struct acpi_device_info *info; + acpi_status status; + + acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev); + if (!acpi_id) { + dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n"); + version = XGENE_AHCI_V1; + } else if (acpi_id->driver_data) { + version = (enum xgene_ahci_version) acpi_id->driver_data; + status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info); + if (ACPI_FAILURE(status)) { + dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", + __func__); + version = XGENE_AHCI_V1; + } + if (info->valid & ACPI_VALID_CID) + version = XGENE_AHCI_V2; + } + } +#endif + dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core, hpriv->mmio); @@ -704,9 +773,19 @@ static int xgene_ahci_probe(struct platform_device *pdev) /* Configure the host controller */ xgene_ahci_hw_init(hpriv); skip_clk_phy: - hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ; - rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info, + switch (version) { + case XGENE_AHCI_V1: + hpriv->flags = AHCI_HFLAG_NO_NCQ; + break; + case XGENE_AHCI_V2: + hpriv->flags |= AHCI_HFLAG_YES_FBS | AHCI_HFLAG_EDGE_IRQ; + break; + default: + break; + } + + rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], &ahci_platform_sht); if (rc) goto disable_resources; @@ -719,20 +798,6 @@ disable_resources: return rc; } -#ifdef CONFIG_ACPI -static const struct acpi_device_id xgene_ahci_acpi_match[] = { - { "APMC0D0D", }, - { } -}; -MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); -#endif - -static const struct of_device_id xgene_ahci_of_match[] = { - {.compatible = "apm,xgene-ahci"}, - {}, -}; -MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); - static struct platform_driver xgene_ahci_driver = { .probe = xgene_ahci_probe, .remove = ata_platform_remove_one, diff --git a/kernel/drivers/ata/libahci.c b/kernel/drivers/ata/libahci.c index 287c4ba02..998c6a85a 100644 --- a/kernel/drivers/ata/libahci.c +++ b/kernel/drivers/ata/libahci.c @@ -495,8 +495,8 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) } } - /* fabricate port_map from cap.nr_ports */ - if (!port_map) { + /* fabricate port_map from cap.nr_ports for < AHCI 1.3 */ + if (!port_map && vers < 0x10300) { port_map = (1 << ahci_nr_ports(cap)) - 1; dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map); @@ -1117,6 +1117,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap, int port_no, void __iomem *mmio, void __iomem *port_mmio) { + struct ahci_host_priv *hpriv = ap->host->private_data; const char *emsg = NULL; int rc; u32 tmp; @@ -1138,6 +1139,11 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap, writel(tmp, port_mmio + PORT_IRQ_STAT); writel(1 << port_no, mmio + HOST_IRQ_STAT); + + /* mark esata ports */ + tmp = readl(port_mmio + PORT_CMD); + if ((tmp & PORT_CMD_ESP) && (hpriv->cap & HOST_CAP_SXS)) + ap->pflags |= ATA_PFLAG_EXTERNAL; } void ahci_init_controller(struct ata_host *host) @@ -1266,6 +1272,15 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, ata_tf_to_fis(tf, pmp, is_cmd, fis); ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); + /* set port value for softreset of Port Multiplier */ + if (pp->fbs_enabled && pp->fbs_last_dev != pmp) { + tmp = readl(port_mmio + PORT_FBS); + tmp &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC); + tmp |= pmp << PORT_FBS_DEV_OFFSET; + writel(tmp, port_mmio + PORT_FBS); + pp->fbs_last_dev = pmp; + } + /* issue & wait */ writel(1, port_mmio + PORT_CMD_ISSUE); @@ -1825,11 +1840,38 @@ static irqreturn_t ahci_multi_irqs_intr(int irq, void *dev_instance) return IRQ_WAKE_THREAD; } -static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance) +static u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked) +{ + unsigned int i, handled = 0; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap; + + if (!(irq_masked & (1 << i))) + continue; + + ap = host->ports[i]; + if (ap) { + ahci_port_intr(ap); + VPRINTK("port %u\n", i); + } else { + VPRINTK("port %u (no irq)\n", i); + if (ata_ratelimit()) + dev_warn(host->dev, + "interrupt on disabled port %u\n", i); + } + + handled = 1; + } + + return handled; +} + +static irqreturn_t ahci_single_edge_irq_intr(int irq, void *dev_instance) { struct ata_host *host = dev_instance; struct ahci_host_priv *hpriv; - unsigned int i, handled = 0; + unsigned int rc = 0; void __iomem *mmio; u32 irq_stat, irq_masked; @@ -1847,25 +1889,44 @@ static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance) spin_lock(&host->lock); - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap; + /* + * HOST_IRQ_STAT behaves as edge triggered latch meaning that + * it should be cleared before all the port events are cleared. + */ + writel(irq_stat, mmio + HOST_IRQ_STAT); - if (!(irq_masked & (1 << i))) - continue; + rc = ahci_handle_port_intr(host, irq_masked); - ap = host->ports[i]; - if (ap) { - ahci_port_intr(ap); - VPRINTK("port %u\n", i); - } else { - VPRINTK("port %u (no irq)\n", i); - if (ata_ratelimit()) - dev_warn(host->dev, - "interrupt on disabled port %u\n", i); - } + spin_unlock(&host->lock); - handled = 1; - } + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(rc); +} + +static irqreturn_t ahci_single_level_irq_intr(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct ahci_host_priv *hpriv; + unsigned int rc = 0; + void __iomem *mmio; + u32 irq_stat, irq_masked; + + VPRINTK("ENTER\n"); + + hpriv = host->private_data; + mmio = hpriv->mmio; + + /* sigh. 0xffffffff is a valid return from h/w */ + irq_stat = readl(mmio + HOST_IRQ_STAT); + if (!irq_stat) + return IRQ_NONE; + + irq_masked = irq_stat & hpriv->port_map; + + spin_lock(&host->lock); + + rc = ahci_handle_port_intr(host, irq_masked); /* HOST_IRQ_STAT behaves as level triggered latch meaning that * it should be cleared after all the port events are cleared; @@ -1882,7 +1943,7 @@ static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance) VPRINTK("EXIT\n"); - return IRQ_RETVAL(handled); + return IRQ_RETVAL(rc); } unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) @@ -2297,7 +2358,7 @@ static int ahci_port_start(struct ata_port *ap) /* * Switch to per-port locking in case each port has its own MSI vector. */ - if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) { + if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) { spin_lock_init(&pp->lock); ap->lock = &pp->lock; } @@ -2425,7 +2486,10 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq, rc = ata_host_start(host); if (rc) return rc; - + /* + * Requests IRQs according to AHCI-1.1 when multiple MSIs were + * allocated. That is one MSI per port, starting from @irq. + */ for (i = 0; i < host->n_ports; i++) { struct ahci_port_priv *pp = host->ports[i]->private_data; @@ -2437,56 +2501,39 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq, rc = devm_request_threaded_irq(host->dev, irq + i, ahci_multi_irqs_intr, - ahci_port_thread_fn, IRQF_SHARED, + ahci_port_thread_fn, 0, pp->irq_desc, host->ports[i]); if (rc) - goto out_free_irqs; - } - - for (i = 0; i < host->n_ports; i++) + return rc; ata_port_desc(host->ports[i], "irq %d", irq + i); - - rc = ata_host_register(host, sht); - if (rc) - goto out_free_all_irqs; - - return 0; - -out_free_all_irqs: - i = host->n_ports; -out_free_irqs: - for (i--; i >= 0; i--) - devm_free_irq(host->dev, irq + i, host->ports[i]); - - return rc; + } + return ata_host_register(host, sht); } /** * ahci_host_activate - start AHCI host, request IRQs and register it * @host: target ATA host - * @irq: base IRQ number to request * @sht: scsi_host_template to use when registering the host * - * Similar to ata_host_activate, but requests IRQs according to AHCI-1.1 - * when multiple MSIs were allocated. That is one MSI per port, starting - * from @irq. - * * LOCKING: * Inherited from calling layer (may sleep). * * RETURNS: * 0 on success, -errno otherwise. */ -int ahci_host_activate(struct ata_host *host, int irq, - struct scsi_host_template *sht) +int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht) { struct ahci_host_priv *hpriv = host->private_data; + int irq = hpriv->irq; int rc; if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) rc = ahci_host_activate_multi_irqs(host, irq, sht); + else if (hpriv->flags & AHCI_HFLAG_EDGE_IRQ) + rc = ata_host_activate(host, irq, ahci_single_edge_irq_intr, + IRQF_SHARED, sht); else - rc = ata_host_activate(host, irq, ahci_single_irq_intr, + rc = ata_host_activate(host, irq, ahci_single_level_irq_intr, IRQF_SHARED, sht); return rc; } diff --git a/kernel/drivers/ata/libahci_platform.c b/kernel/drivers/ata/libahci_platform.c index d89305d28..aaa761b90 100644 --- a/kernel/drivers/ata/libahci_platform.c +++ b/kernel/drivers/ata/libahci_platform.c @@ -518,6 +518,8 @@ int ahci_platform_init_host(struct platform_device *pdev, return -EINVAL; } + hpriv->irq = irq; + /* prepare host */ pi.private_data = (void *)(unsigned long)hpriv->flags; @@ -588,7 +590,7 @@ int ahci_platform_init_host(struct platform_device *pdev, ahci_init_controller(host); ahci_print_info(host, "platform"); - return ahci_host_activate(host, irq, sht); + return ahci_host_activate(host, sht); } EXPORT_SYMBOL_GPL(ahci_platform_init_host); diff --git a/kernel/drivers/ata/libata-core.c b/kernel/drivers/ata/libata-core.c index e0064d180..b79cb10e2 100644 --- a/kernel/drivers/ata/libata-core.c +++ b/kernel/drivers/ata/libata-core.c @@ -3640,7 +3640,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params, * EH context. * * RETURNS: - * 0 on succes, -errno otherwise. + * 0 on success, -errno otherwise. */ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, bool spm_wakeup) @@ -4753,6 +4753,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure + * @tag: tag * * LOCKING: * None. @@ -6455,12 +6456,7 @@ static int __init ata_parse_force_one(char **cur, struct ata_force_ent *force_ent, const char **reason) { - /* FIXME: Currently, there's no way to tag init const data and - * using __initdata causes build failure on some versions of - * gcc. Once __initdataconst is implemented, add const to the - * following structure. - */ - static struct ata_force_param force_tbl[] __initdata = { + static const struct ata_force_param force_tbl[] __initconst = { { "40c", .cbl = ATA_CBL_PATA40 }, { "80c", .cbl = ATA_CBL_PATA80 }, { "short40c", .cbl = ATA_CBL_PATA40_SHORT }, @@ -6471,6 +6467,8 @@ static int __init ata_parse_force_one(char **cur, { "3.0Gbps", .spd_limit = 2 }, { "noncq", .horkage_on = ATA_HORKAGE_NONCQ }, { "ncq", .horkage_off = ATA_HORKAGE_NONCQ }, + { "noncqtrim", .horkage_on = ATA_HORKAGE_NO_NCQ_TRIM }, + { "ncqtrim", .horkage_off = ATA_HORKAGE_NO_NCQ_TRIM }, { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID }, { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) }, { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) }, diff --git a/kernel/drivers/ata/libata-eh.c b/kernel/drivers/ata/libata-eh.c index cb0508af1..961acc788 100644 --- a/kernel/drivers/ata/libata-eh.c +++ b/kernel/drivers/ata/libata-eh.c @@ -1505,12 +1505,20 @@ static const char *ata_err_string(unsigned int err_mask) unsigned int ata_read_log_page(struct ata_device *dev, u8 log, u8 page, void *buf, unsigned int sectors) { + unsigned long ap_flags = dev->link->ap->flags; struct ata_taskfile tf; unsigned int err_mask; bool dma = false; DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page); + /* + * Return error without actually issuing the command on controllers + * which e.g. lockup on a read log page. + */ + if (ap_flags & ATA_FLAG_NO_LOG_PAGE) + return AC_ERR_DEV; + retry: ata_tf_init(dev, &tf); if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) && diff --git a/kernel/drivers/ata/libata-scsi.c b/kernel/drivers/ata/libata-scsi.c index 0d7f0da3a..e417e1a1d 100644 --- a/kernel/drivers/ata/libata-scsi.c +++ b/kernel/drivers/ata/libata-scsi.c @@ -675,19 +675,18 @@ static int ata_ioc32(struct ata_port *ap) int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev, int cmd, void __user *arg) { - int val = -EINVAL, rc = -EINVAL; + unsigned long val; + int rc = -EINVAL; unsigned long flags; switch (cmd) { - case ATA_IOC_GET_IO32: + case HDIO_GET_32BIT: spin_lock_irqsave(ap->lock, flags); val = ata_ioc32(ap); spin_unlock_irqrestore(ap->lock, flags); - if (copy_to_user(arg, &val, 1)) - return -EFAULT; - return 0; + return put_user(val, (unsigned long __user *)arg); - case ATA_IOC_SET_IO32: + case HDIO_SET_32BIT: val = (unsigned long) arg; rc = 0; spin_lock_irqsave(ap->lock, flags); @@ -1757,6 +1756,15 @@ nothing_to_do: return 1; } +static void ata_qc_done(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + void (*done)(struct scsi_cmnd *) = qc->scsidone; + + ata_qc_free(qc); + done(cmd); +} + static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -1774,28 +1782,17 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE */ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && - ((cdb[2] & 0x20) || need_sense)) { + ((cdb[2] & 0x20) || need_sense)) ata_gen_passthru_sense(qc); - } else { - if (!need_sense) { - cmd->result = SAM_STAT_GOOD; - } else { - /* TODO: decide which descriptor format to use - * for 48b LBA devices and call that here - * instead of the fixed desc, which is only - * good for smaller LBA (and maybe CHS?) - * devices. - */ - ata_gen_ata_sense(qc); - } - } + else if (need_sense) + ata_gen_ata_sense(qc); + else + cmd->result = SAM_STAT_GOOD; if (need_sense && !ap->ops->error_handler) ata_dump_status(ap->print_id, &qc->result_tf); - qc->scsidone(cmd); - - ata_qc_free(qc); + ata_qc_done(qc); } /** @@ -2015,8 +2012,11 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) VPRINTK("ENTER\n"); - /* set scsi removable (RMB) bit per ata bit */ - if (ata_id_removable(args->id)) + /* set scsi removable (RMB) bit per ata bit, or if the + * AHCI port says it's external (Hotplug-capable, eSATA). + */ + if (ata_id_removable(args->id) || + (args->dev->link->ap->pflags & ATA_PFLAG_EXTERNAL)) hdr[1] |= (1 << 7); if (args->dev->class == ATA_DEV_ZAC) { @@ -2594,8 +2594,7 @@ static void atapi_sense_complete(struct ata_queued_cmd *qc) ata_gen_passthru_sense(qc); } - qc->scsidone(qc->scsicmd); - ata_qc_free(qc); + ata_qc_done(qc); } /* is it pointless to prefer PIO for "safety reasons"? */ @@ -2690,8 +2689,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) qc->dev->sdev->locked = 0; qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; - qc->scsidone(cmd); - ata_qc_free(qc); + ata_qc_done(qc); return; } @@ -2735,8 +2733,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) cmd->result = SAM_STAT_GOOD; } - qc->scsidone(cmd); - ata_qc_free(qc); + ata_qc_done(qc); } /** * atapi_xlat - Initialize PACKET taskfile @@ -2914,12 +2911,14 @@ ata_scsi_map_proto(u8 byte1) case 5: /* PIO Data-out */ return ATA_PROT_PIO; + case 12: /* FPDMA */ + return ATA_PROT_NCQ; + case 0: /* Hard Reset */ case 1: /* SRST */ case 8: /* Device Diagnostic */ case 9: /* Device Reset */ case 7: /* DMA Queued */ - case 12: /* FPDMA */ case 15: /* Return Response Info */ default: /* Reserved */ break; @@ -2947,6 +2946,9 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; + /* enable LBA */ + tf->flags |= ATA_TFLAG_LBA; + /* * 12 and 16 byte CDBs use different offsets to * provide the various register values. @@ -2992,6 +2994,10 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) tf->command = cdb[9]; } + /* For NCQ commands with FPDMA protocol, copy the tag value */ + if (tf->protocol == ATA_PROT_NCQ) + tf->nsect = qc->tag << 3; + /* enforce correct master/slave bit */ tf->device = dev->devno ? tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; @@ -3689,9 +3695,6 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) */ shost->max_host_blocked = 1; - if (scsi_init_shared_tag_map(shost, host->n_tags)) - goto err_add; - rc = scsi_add_host_with_dma(ap->scsi_host, &ap->tdev, ap->host->dev); if (rc) diff --git a/kernel/drivers/ata/libata-sff.c b/kernel/drivers/ata/libata-sff.c index c9f2a33b8..65beb7abb 100644 --- a/kernel/drivers/ata/libata-sff.c +++ b/kernel/drivers/ata/libata-sff.c @@ -997,12 +997,9 @@ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) { struct ata_port *ap = qc->ap; - unsigned long flags; if (ap->ops->error_handler) { if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - /* EH might have kicked in while host lock is * released. */ @@ -1014,8 +1011,6 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) } else ata_port_freeze(ap); } - - spin_unlock_irqrestore(ap->lock, flags); } else { if (likely(!(qc->err_mask & AC_ERR_HSM))) ata_qc_complete(qc); @@ -1024,10 +1019,8 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) } } else { if (in_wq) { - spin_lock_irqsave(ap->lock, flags); ata_sff_irq_on(ap); ata_qc_complete(qc); - spin_unlock_irqrestore(ap->lock, flags); } else ata_qc_complete(qc); } @@ -1048,9 +1041,10 @@ int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, { struct ata_link *link = qc->dev->link; struct ata_eh_info *ehi = &link->eh_info; - unsigned long flags = 0; int poll_next; + lockdep_assert_held(ap->lock); + WARN_ON_ONCE((qc->flags & ATA_QCFLAG_ACTIVE) == 0); /* Make sure ata_sff_qc_issue() does not throw things @@ -1112,14 +1106,6 @@ fsm_start: } } - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - if (in_wq) - spin_lock_irqsave(ap->lock, flags); - if (qc->tf.protocol == ATA_PROT_PIO) { /* PIO data out protocol. * send first data block. @@ -1135,9 +1121,6 @@ fsm_start: /* send CDB */ atapi_send_cdb(ap, qc); - if (in_wq) - spin_unlock_irqrestore(ap->lock, flags); - /* if polling, ata_sff_pio_task() handles the rest. * otherwise, interrupt handler takes over from here. */ @@ -1361,12 +1344,14 @@ static void ata_sff_pio_task(struct work_struct *work) u8 status; int poll_next; + spin_lock_irq(ap->lock); + BUG_ON(ap->sff_pio_task_link == NULL); /* qc can be NULL if timeout occurred */ qc = ata_qc_from_tag(ap, link->active_tag); if (!qc) { ap->sff_pio_task_link = NULL; - return; + goto out_unlock; } fsm_start: @@ -1381,11 +1366,14 @@ fsm_start: */ status = ata_sff_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { + spin_unlock_irq(ap->lock); ata_msleep(ap, 2); + spin_lock_irq(ap->lock); + status = ata_sff_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { ata_sff_queue_pio_task(link, ATA_SHORT_PAUSE); - return; + goto out_unlock; } } @@ -1402,6 +1390,8 @@ fsm_start: */ if (poll_next) goto fsm_start; +out_unlock: + spin_unlock_irq(ap->lock); } /** diff --git a/kernel/drivers/ata/pata_arasan_cf.c b/kernel/drivers/ata/pata_arasan_cf.c index a9b0c820f..80fe0f6fe 100644 --- a/kernel/drivers/ata/pata_arasan_cf.c +++ b/kernel/drivers/ata/pata_arasan_cf.c @@ -4,7 +4,7 @@ * Arasan Compact Flash host controller source file * * Copyright (C) 2011 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -834,7 +834,7 @@ static int arasan_cf_probe(struct platform_device *pdev) return -ENOMEM; } - acdev->clk = clk_get(&pdev->dev, NULL); + acdev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(acdev->clk)) { dev_warn(&pdev->dev, "Clock not found\n"); return PTR_ERR(acdev->clk); @@ -843,9 +843,8 @@ static int arasan_cf_probe(struct platform_device *pdev) /* allocate host */ host = ata_host_alloc(&pdev->dev, 1); if (!host) { - ret = -ENOMEM; dev_warn(&pdev->dev, "alloc host fail\n"); - goto free_clk; + return -ENOMEM; } ap = host->ports[0]; @@ -894,7 +893,7 @@ static int arasan_cf_probe(struct platform_device *pdev) ret = cf_init(acdev); if (ret) - goto free_clk; + return ret; cf_card_detect(acdev, 0); @@ -904,8 +903,7 @@ static int arasan_cf_probe(struct platform_device *pdev) return 0; cf_exit(acdev); -free_clk: - clk_put(acdev->clk); + return ret; } @@ -916,7 +914,6 @@ static int arasan_cf_remove(struct platform_device *pdev) ata_host_detach(host); cf_exit(acdev); - clk_put(acdev->clk); return 0; } @@ -968,7 +965,7 @@ static struct platform_driver arasan_cf_driver = { module_platform_driver(arasan_cf_driver); -MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); +MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>"); MODULE_DESCRIPTION("Arasan ATA Compact Flash driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/kernel/drivers/ata/pata_at91.c b/kernel/drivers/ata/pata_at91.c index 9e85937d3..ace0a4de3 100644 --- a/kernel/drivers/ata/pata_at91.c +++ b/kernel/drivers/ata/pata_at91.c @@ -24,11 +24,13 @@ #include <linux/ata.h> #include <linux/clk.h> #include <linux/libata.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/atmel-smc.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/platform_data/atmel.h> +#include <linux/regmap.h> -#include <mach/at91sam9_smc.h> #include <asm/gpio.h> #define DRV_NAME "pata_at91" @@ -57,6 +59,15 @@ struct smc_range { int max; }; +struct regmap *smc; + +struct at91sam9_smc_generic_fields { + struct regmap_field *setup; + struct regmap_field *pulse; + struct regmap_field *cycle; + struct regmap_field *mode; +} fields; + /** * adjust_smc_value - adjust value for one of SMC registers. * @value: adjusted value @@ -206,7 +217,6 @@ static void set_smc_timing(struct device *dev, struct ata_device *adev, { int ret = 0; int use_iordy; - struct sam9_smc_config smc; unsigned int t6z; /* data tristate time in ns */ unsigned int cycle; /* SMC Cycle width in MCK ticks */ unsigned int setup; /* SMC Setup width in MCK ticks */ @@ -244,19 +254,21 @@ static void set_smc_timing(struct device *dev, struct ata_device *adev, dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles); - /* SMC Setup Register */ - smc.nwe_setup = smc.nrd_setup = setup; - smc.ncs_write_setup = smc.ncs_read_setup = 0; - /* SMC Pulse Register */ - smc.nwe_pulse = smc.nrd_pulse = pulse; - smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse; - /* SMC Cycle Register */ - smc.write_cycle = smc.read_cycle = cycle; - /* SMC Mode Register*/ - smc.tdf_cycles = tdf_cycles; - smc.mode = info->mode; - - sam9_smc_configure(0, info->cs, &smc); + regmap_fields_write(fields.setup, info->cs, + AT91SAM9_SMC_NRDSETUP(setup) | + AT91SAM9_SMC_NWESETUP(setup) | + AT91SAM9_SMC_NCS_NRDSETUP(0) | + AT91SAM9_SMC_NCS_WRSETUP(0)); + regmap_fields_write(fields.pulse, info->cs, + AT91SAM9_SMC_NRDPULSE(pulse) | + AT91SAM9_SMC_NWEPULSE(pulse) | + AT91SAM9_SMC_NCS_NRDPULSE(cs_pulse) | + AT91SAM9_SMC_NCS_WRPULSE(cs_pulse)); + regmap_fields_write(fields.cycle, info->cs, + AT91SAM9_SMC_NRDCYCLE(cycle) | + AT91SAM9_SMC_NWECYCLE(cycle)); + regmap_fields_write(fields.mode, info->cs, info->mode | + AT91_SMC_TDF_(tdf_cycles)); } static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -280,21 +292,21 @@ static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev, { struct at91_ide_info *info = dev->link->ap->host->private_data; unsigned int consumed; + unsigned int mode; unsigned long flags; - struct sam9_smc_config smc; local_irq_save(flags); - sam9_smc_read_mode(0, info->cs, &smc); + regmap_fields_read(fields.mode, info->cs, &mode); /* set 16bit mode before writing data */ - smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16; - sam9_smc_write_mode(0, info->cs, &smc); + regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) | + AT91_SMC_DBW_16); consumed = ata_sff_data_xfer(dev, buf, buflen, rw); /* restore 8bit mode after data is written */ - smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8; - sam9_smc_write_mode(0, info->cs, &smc); + regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) | + AT91_SMC_DBW_8); local_irq_restore(flags); return consumed; @@ -312,6 +324,36 @@ static struct ata_port_operations pata_at91_port_ops = { .cable_detect = ata_cable_40wire, }; +static int at91sam9_smc_fields_init(struct device *dev) +{ + struct reg_field field = REG_FIELD(0, 0, 31); + + field.id_size = 8; + field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ; + + field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC); + fields.setup = devm_regmap_field_alloc(dev, smc, field); + if (IS_ERR(fields.setup)) + return PTR_ERR(fields.setup); + + field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC); + fields.pulse = devm_regmap_field_alloc(dev, smc, field); + if (IS_ERR(fields.pulse)) + return PTR_ERR(fields.pulse); + + field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC); + fields.cycle = devm_regmap_field_alloc(dev, smc, field); + if (IS_ERR(fields.cycle)) + return PTR_ERR(fields.cycle); + + field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC); + fields.mode = devm_regmap_field_alloc(dev, smc, field); + if (IS_ERR(fields.mode)) + return PTR_ERR(fields.mode); + + return 0; +} + static int pata_at91_probe(struct platform_device *pdev) { struct at91_cf_data *board = dev_get_platdata(&pdev->dev); @@ -341,6 +383,14 @@ static int pata_at91_probe(struct platform_device *pdev) irq = board->irq_pin; + smc = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "atmel,smc"); + if (IS_ERR(smc)) + return PTR_ERR(smc); + + ret = at91sam9_smc_fields_init(dev); + if (ret < 0) + return ret; + /* init ata host */ host = ata_host_alloc(dev, 1); diff --git a/kernel/drivers/ata/pata_hpt366.c b/kernel/drivers/ata/pata_hpt366.c index cbc3de793..0038dc4c0 100644 --- a/kernel/drivers/ata/pata_hpt366.c +++ b/kernel/drivers/ata/pata_hpt366.c @@ -352,7 +352,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; const struct ata_port_info *ppi[] = { &info_hpt366, NULL }; - void *hpriv = NULL; + const void *hpriv = NULL; u32 reg1; int rc; @@ -383,7 +383,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) break; } /* Now kick off ATA set up */ - return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0); + return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, (void *)hpriv, 0); } #ifdef CONFIG_PM_SLEEP diff --git a/kernel/drivers/ata/pata_it821x.c b/kernel/drivers/ata/pata_it821x.c index a5088ecb3..7a21edf89 100644 --- a/kernel/drivers/ata/pata_it821x.c +++ b/kernel/drivers/ata/pata_it821x.c @@ -604,9 +604,9 @@ static void it821x_display_disk(int n, u8 *buf) { unsigned char id[41]; int mode = 0; - char *mtype = ""; + const char *mtype = ""; char mbuf[8]; - char *cbl = "(40 wire cable)"; + const char *cbl = "(40 wire cable)"; static const char *types[5] = { "RAID0", "RAID1", "RAID 0+1", "JBOD", "DISK" @@ -903,7 +903,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; const struct ata_port_info *ppi[] = { NULL, NULL }; - static char *mode[2] = { "pass through", "smart" }; + static const char *mode[2] = { "pass through", "smart" }; int rc; rc = pcim_enable_device(pdev); diff --git a/kernel/drivers/ata/pata_macio.c b/kernel/drivers/ata/pata_macio.c index b0028588f..e3d4b059f 100644 --- a/kernel/drivers/ata/pata_macio.c +++ b/kernel/drivers/ata/pata_macio.c @@ -1344,6 +1344,7 @@ static struct of_device_id pata_macio_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, pata_macio_match); static struct macio_driver pata_macio_driver = { diff --git a/kernel/drivers/ata/pata_pxa.c b/kernel/drivers/ata/pata_pxa.c index c36b3e653..f6c46e9a4 100644 --- a/kernel/drivers/ata/pata_pxa.c +++ b/kernel/drivers/ata/pata_pxa.c @@ -24,79 +24,36 @@ #include <linux/ata.h> #include <linux/libata.h> #include <linux/platform_device.h> +#include <linux/dmaengine.h> +#include <linux/dma/pxa-dma.h> #include <linux/gpio.h> #include <linux/slab.h> #include <linux/completion.h> #include <scsi/scsi_host.h> -#include <mach/pxa2xx-regs.h> #include <linux/platform_data/ata-pxa.h> -#include <mach/dma.h> #define DRV_NAME "pata_pxa" #define DRV_VERSION "0.1" struct pata_pxa_data { - uint32_t dma_channel; - struct pxa_dma_desc *dma_desc; - dma_addr_t dma_desc_addr; - uint32_t dma_desc_id; - - /* DMA IO physical address */ - uint32_t dma_io_addr; - /* PXA DREQ<0:2> pin selector */ - uint32_t dma_dreq; - /* DMA DCSR register value */ - uint32_t dma_dcsr; - + struct dma_chan *dma_chan; + dma_cookie_t dma_cookie; struct completion dma_done; }; /* - * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor, - * if the transfer is longer, it is split into multiple chained descriptors. + * DMA interrupt handler. */ -static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc) +static void pxa_ata_dma_irq(void *d) { - struct pata_pxa_data *pd = qc->ap->private_data; - - uint32_t cpu_len, seg_len; - dma_addr_t cpu_addr; - - cpu_addr = sg_dma_address(sg); - cpu_len = sg_dma_len(sg); - - do { - seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len; - - pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr + - ((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc)); - - pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 | - DCMD_WIDTH2 | (DCMD_LENGTH & seg_len); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr; - pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr; - pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR | - DCMD_FLOWTRG; - } else { - pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr; - pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr; - pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR | - DCMD_FLOWSRC; - } - - cpu_len -= seg_len; - cpu_addr += seg_len; - pd->dma_desc_id++; + struct pata_pxa_data *pd = d; + enum dma_status status; - } while (cpu_len); - - /* Should not happen */ - if (seg_len & 0x1f) - DALGN |= (1 << pd->dma_dreq); + status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, NULL); + if (status == DMA_ERROR || status == DMA_COMPLETE) + complete(&pd->dma_done); } /* @@ -105,28 +62,22 @@ static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc) static void pxa_qc_prep(struct ata_queued_cmd *qc) { struct pata_pxa_data *pd = qc->ap->private_data; - int si = 0; - struct scatterlist *sg; + struct dma_async_tx_descriptor *tx; + enum dma_transfer_direction dir; if (!(qc->flags & ATA_QCFLAG_DMAMAP)) return; - pd->dma_desc_id = 0; - - DCSR(pd->dma_channel) = 0; - DALGN &= ~(1 << pd->dma_dreq); - - for_each_sg(qc->sg, sg, qc->n_elem, si) - pxa_load_dmac(sg, qc); - - pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP; - - /* Fire IRQ only at the end of last block */ - pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN; - - DDADR(pd->dma_channel) = pd->dma_desc_addr; - DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel; - + dir = (qc->dma_dir == DMA_TO_DEVICE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM); + tx = dmaengine_prep_slave_sg(pd->dma_chan, qc->sg, qc->n_elem, dir, + DMA_PREP_INTERRUPT); + if (!tx) { + ata_dev_err(qc->dev, "prep_slave_sg() failed\n"); + return; + } + tx->callback = pxa_ata_dma_irq; + tx->callback_param = pd; + pd->dma_cookie = dmaengine_submit(tx); } /* @@ -145,7 +96,7 @@ static void pxa_bmdma_start(struct ata_queued_cmd *qc) { struct pata_pxa_data *pd = qc->ap->private_data; init_completion(&pd->dma_done); - DCSR(pd->dma_channel) = DCSR_RUN; + dma_async_issue_pending(pd->dma_chan); } /* @@ -154,12 +105,14 @@ static void pxa_bmdma_start(struct ata_queued_cmd *qc) static void pxa_bmdma_stop(struct ata_queued_cmd *qc) { struct pata_pxa_data *pd = qc->ap->private_data; + enum dma_status status; - if ((DCSR(pd->dma_channel) & DCSR_RUN) && - wait_for_completion_timeout(&pd->dma_done, HZ)) - dev_err(qc->ap->dev, "Timeout waiting for DMA completion!"); + status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, NULL); + if (status != DMA_ERROR && status != DMA_COMPLETE && + wait_for_completion_timeout(&pd->dma_done, HZ)) + ata_dev_err(qc->dev, "Timeout waiting for DMA completion!"); - DCSR(pd->dma_channel) = 0; + dmaengine_terminate_all(pd->dma_chan); } /* @@ -170,8 +123,11 @@ static unsigned char pxa_bmdma_status(struct ata_port *ap) { struct pata_pxa_data *pd = ap->private_data; unsigned char ret = ATA_DMA_INTR; + struct dma_tx_state state; + enum dma_status status; - if (pd->dma_dcsr & DCSR_BUSERR) + status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, &state); + if (status != DMA_COMPLETE) ret |= ATA_DMA_ERR; return ret; @@ -213,21 +169,6 @@ static struct ata_port_operations pxa_ata_port_ops = { .qc_prep = pxa_qc_prep, }; -/* - * DMA interrupt handler. - */ -static void pxa_ata_dma_irq(int dma, void *port) -{ - struct ata_port *ap = port; - struct pata_pxa_data *pd = ap->private_data; - - pd->dma_dcsr = DCSR(dma); - DCSR(dma) = pd->dma_dcsr; - - if (pd->dma_dcsr & DCSR_STOPSTATE) - complete(&pd->dma_done); -} - static int pxa_ata_probe(struct platform_device *pdev) { struct ata_host *host; @@ -238,6 +179,9 @@ static int pxa_ata_probe(struct platform_device *pdev) struct resource *dma_res; struct resource *irq_res; struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev); + struct dma_slave_config config; + dma_cap_mask_t mask; + struct pxad_param param; int ret = 0; /* @@ -333,29 +277,32 @@ static int pxa_ata_probe(struct platform_device *pdev) return -ENOMEM; ap->private_data = data; - data->dma_dreq = pdata->dma_dreq; - data->dma_io_addr = dma_res->start; - /* - * Allocate space for the DMA descriptors - */ - data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE, - &data->dma_desc_addr, GFP_KERNEL); - if (!data->dma_desc) - return -EINVAL; + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + param.prio = PXAD_PRIO_LOWEST; + param.drcmr = pdata->dma_dreq; + memset(&config, 0, sizeof(config)); + config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + config.src_addr = dma_res->start; + config.dst_addr = dma_res->start; + config.src_maxburst = 32; + config.dst_maxburst = 32; /* * Request the DMA channel */ - data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW, - pxa_ata_dma_irq, ap); - if (data->dma_channel < 0) + data->dma_chan = + dma_request_slave_channel_compat(mask, pxad_filter_fn, + ¶m, &pdev->dev, "data"); + if (!data->dma_chan) return -EBUSY; - - /* - * Stop and clear the DMA channel - */ - DCSR(data->dma_channel) = 0; + ret = dmaengine_slave_config(data->dma_chan, &config); + if (ret < 0) { + dev_err(&pdev->dev, "dma configuration failed: %d\n", ret); + return ret; + } /* * Activate the ATA host @@ -363,7 +310,7 @@ static int pxa_ata_probe(struct platform_device *pdev) ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt, pdata->irq_flags, &pxa_ata_sht); if (ret) - pxa_free_dma(data->dma_channel); + dma_release_channel(data->dma_chan); return ret; } @@ -373,7 +320,7 @@ static int pxa_ata_remove(struct platform_device *pdev) struct ata_host *host = platform_get_drvdata(pdev); struct pata_pxa_data *data = host->ports[0]->private_data; - pxa_free_dma(data->dma_channel); + dma_release_channel(data->dma_chan); ata_host_detach(host); diff --git a/kernel/drivers/ata/pata_rb532_cf.c b/kernel/drivers/ata/pata_rb532_cf.c index 6d08446b8..c8b6a780a 100644 --- a/kernel/drivers/ata/pata_rb532_cf.c +++ b/kernel/drivers/ata/pata_rb532_cf.c @@ -27,11 +27,12 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <linux/libata.h> #include <scsi/scsi_host.h> -#include <asm/gpio.h> +#include <asm/mach-rc32434/rb.h> #define DRV_NAME "pata-rb532-cf" #define DRV_VERSION "0.1.0" @@ -108,6 +109,7 @@ static int rb532_pata_driver_probe(struct platform_device *pdev) int gpio; struct resource *res; struct ata_host *ah; + struct cf_device *pdata; struct rb532_cf_info *info; int ret; @@ -123,7 +125,13 @@ static int rb532_pata_driver_probe(struct platform_device *pdev) return -ENOENT; } - gpio = irq_to_gpio(irq); + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "no platform data specified\n"); + return -EINVAL; + } + + gpio = pdata->gpio_pin; if (gpio < 0) { dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq); return -ENOENT; diff --git a/kernel/drivers/ata/pata_samsung_cf.c b/kernel/drivers/ata/pata_samsung_cf.c index fa44eb287..f6facd686 100644 --- a/kernel/drivers/ata/pata_samsung_cf.c +++ b/kernel/drivers/ata/pata_samsung_cf.c @@ -70,7 +70,7 @@ struct s3c_ide_info { struct clk *clk; void __iomem *ide_addr; void __iomem *sfr_addr; - unsigned int irq; + int irq; enum s3c_cpu_type cpu_type; unsigned int fifo_status_reg; }; @@ -638,7 +638,7 @@ static const struct dev_pm_ops pata_s3c_pm_ops = { #endif /* driver device registration */ -static struct platform_device_id pata_s3c_driver_ids[] = { +static const struct platform_device_id pata_s3c_driver_ids[] = { { .name = "s3c64xx-pata", .driver_data = TYPE_S3C64XX, diff --git a/kernel/drivers/ata/sata_fsl.c b/kernel/drivers/ata/sata_fsl.c index 5389579c5..a723ae929 100644 --- a/kernel/drivers/ata/sata_fsl.c +++ b/kernel/drivers/ata/sata_fsl.c @@ -45,7 +45,8 @@ enum { SATA_FSL_MAX_PRD_DIRECT = 16, /* Direct PRDT entries */ SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | - ATA_FLAG_PMP | ATA_FLAG_NCQ | ATA_FLAG_AN), + ATA_FLAG_PMP | ATA_FLAG_NCQ | + ATA_FLAG_AN | ATA_FLAG_NO_LOG_PAGE), SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ diff --git a/kernel/drivers/ata/sata_highbank.c b/kernel/drivers/ata/sata_highbank.c index 24e311fe2..8638d575b 100644 --- a/kernel/drivers/ata/sata_highbank.c +++ b/kernel/drivers/ata/sata_highbank.c @@ -499,6 +499,7 @@ static int ahci_highbank_probe(struct platform_device *pdev) return -ENOMEM; } + hpriv->irq = irq; hpriv->flags |= (unsigned long)pi.private_data; hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); @@ -568,7 +569,7 @@ static int ahci_highbank_probe(struct platform_device *pdev) ahci_init_controller(host); ahci_print_info(host, "platform"); - rc = ahci_host_activate(host, irq, &ahci_highbank_platform_sht); + rc = ahci_host_activate(host, &ahci_highbank_platform_sht); if (rc) goto err0; diff --git a/kernel/drivers/ata/sata_nv.c b/kernel/drivers/ata/sata_nv.c index 7ece85f43..734f563b8 100644 --- a/kernel/drivers/ata/sata_nv.c +++ b/kernel/drivers/ata/sata_nv.c @@ -599,7 +599,7 @@ MODULE_DEVICE_TABLE(pci, nv_pci_tbl); MODULE_VERSION(DRV_VERSION); static bool adma_enabled; -static bool swncq_enabled = 1; +static bool swncq_enabled = true; static bool msi_enabled; static void nv_adma_register_mode(struct ata_port *ap) diff --git a/kernel/drivers/ata/sata_rcar.c b/kernel/drivers/ata/sata_rcar.c index d49a5193b..8804127b1 100644 --- a/kernel/drivers/ata/sata_rcar.c +++ b/kernel/drivers/ata/sata_rcar.c @@ -861,10 +861,6 @@ MODULE_DEVICE_TABLE(of, sata_rcar_match); static const struct platform_device_id sata_rcar_id_table[] = { { "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */ { "sata-r8a7779", RCAR_GEN1_SATA }, - { "sata-r8a7790", RCAR_GEN2_SATA }, - { "sata-r8a7790-es1", RCAR_R8A7790_ES1_SATA }, - { "sata-r8a7791", RCAR_GEN2_SATA }, - { "sata-r8a7793", RCAR_GEN2_SATA }, { }, }; MODULE_DEVICE_TABLE(platform, sata_rcar_id_table); diff --git a/kernel/drivers/ata/sata_sil.c b/kernel/drivers/ata/sata_sil.c index dea6edcbf..29bcff086 100644 --- a/kernel/drivers/ata/sata_sil.c +++ b/kernel/drivers/ata/sata_sil.c @@ -630,6 +630,9 @@ static void sil_dev_config(struct ata_device *dev) unsigned int n, quirks = 0; unsigned char model_num[ATA_ID_PROD_LEN + 1]; + /* This controller doesn't support trim */ + dev->horkage |= ATA_HORKAGE_NOTRIM; + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); for (n = 0; sil_blacklist[n].product; n++) diff --git a/kernel/drivers/ata/sata_sx4.c b/kernel/drivers/ata/sata_sx4.c index 3a18a8a71..fab504fd9 100644 --- a/kernel/drivers/ata/sata_sx4.c +++ b/kernel/drivers/ata/sata_sx4.c @@ -1238,8 +1238,12 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host) readl(mmio + PDC_SDRAM_CONTROL); /* Turn on for ECC */ - pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); + if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0)) { + pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n", + PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE); + return 1; + } if (spd0 == 0x02) { data |= (0x01 << 16); writel(data, mmio + PDC_SDRAM_CONTROL); @@ -1380,8 +1384,12 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) /* ECC initiliazation. */ - pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); + if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0)) { + pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n", + PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE); + return 1; + } if (spd0 == 0x02) { void *buf; VPRINTK("Start ECC initialization\n"); |