diff options
Diffstat (limited to 'kernel/drivers/acpi/pmic/intel_pmic_xpower.c')
-rw-r--r-- | kernel/drivers/acpi/pmic/intel_pmic_xpower.c | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/kernel/drivers/acpi/pmic/intel_pmic_xpower.c b/kernel/drivers/acpi/pmic/intel_pmic_xpower.c new file mode 100644 index 000000000..6a082d4de --- /dev/null +++ b/kernel/drivers/acpi/pmic/intel_pmic_xpower.c @@ -0,0 +1,268 @@ +/* + * intel_pmic_xpower.c - XPower AXP288 PMIC operation region driver + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/mfd/axp20x.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <linux/iio/consumer.h> +#include "intel_pmic.h" + +#define XPOWER_GPADC_LOW 0x5b + +static struct pmic_table power_table[] = { + { + .address = 0x00, + .reg = 0x13, + .bit = 0x05, + }, + { + .address = 0x04, + .reg = 0x13, + .bit = 0x06, + }, + { + .address = 0x08, + .reg = 0x13, + .bit = 0x07, + }, + { + .address = 0x0c, + .reg = 0x12, + .bit = 0x03, + }, + { + .address = 0x10, + .reg = 0x12, + .bit = 0x04, + }, + { + .address = 0x14, + .reg = 0x12, + .bit = 0x05, + }, + { + .address = 0x18, + .reg = 0x12, + .bit = 0x06, + }, + { + .address = 0x1c, + .reg = 0x12, + .bit = 0x00, + }, + { + .address = 0x20, + .reg = 0x12, + .bit = 0x01, + }, + { + .address = 0x24, + .reg = 0x12, + .bit = 0x02, + }, + { + .address = 0x28, + .reg = 0x13, + .bit = 0x02, + }, + { + .address = 0x2c, + .reg = 0x13, + .bit = 0x03, + }, + { + .address = 0x30, + .reg = 0x13, + .bit = 0x04, + }, + { + .address = 0x38, + .reg = 0x10, + .bit = 0x03, + }, + { + .address = 0x3c, + .reg = 0x10, + .bit = 0x06, + }, + { + .address = 0x40, + .reg = 0x10, + .bit = 0x05, + }, + { + .address = 0x44, + .reg = 0x10, + .bit = 0x04, + }, + { + .address = 0x48, + .reg = 0x10, + .bit = 0x01, + }, + { + .address = 0x4c, + .reg = 0x10, + .bit = 0x00 + }, +}; + +/* TMP0 - TMP5 are the same, all from GPADC */ +static struct pmic_table thermal_table[] = { + { + .address = 0x00, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x0c, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x18, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x24, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x30, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x3c, + .reg = XPOWER_GPADC_LOW + }, +}; + +static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg, + int bit, u64 *value) +{ + int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = (data & BIT(bit)) ? 1 : 0; + return 0; +} + +static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg, + int bit, bool on) +{ + int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + if (on) + data |= BIT(bit); + else + data &= ~BIT(bit); + + if (regmap_write(regmap, reg, data)) + return -EIO; + + return 0; +} + +/** + * intel_xpower_pmic_get_raw_temp(): Get raw temperature reading from the PMIC + * + * @regmap: regmap of the PMIC device + * @reg: register to get the reading + * + * We could get the sensor value by manipulating the HW regs here, but since + * the axp288 IIO driver may also access the same regs at the same time, the + * APIs provided by IIO subsystem are used here instead to avoid problems. As + * a result, the two passed in params are of no actual use. + * + * Return a positive value on success, errno on failure. + */ +static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg) +{ + struct iio_channel *gpadc_chan; + int ret, val; + + gpadc_chan = iio_channel_get(NULL, "axp288-system-temp"); + if (IS_ERR_OR_NULL(gpadc_chan)) + return -EACCES; + + ret = iio_read_channel_raw(gpadc_chan, &val); + if (ret < 0) + val = ret; + + iio_channel_release(gpadc_chan); + return val; +} + +static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = { + .get_power = intel_xpower_pmic_get_power, + .update_power = intel_xpower_pmic_update_power, + .get_raw_temp = intel_xpower_pmic_get_raw_temp, + .power_table = power_table, + .power_table_count = ARRAY_SIZE(power_table), + .thermal_table = thermal_table, + .thermal_table_count = ARRAY_SIZE(thermal_table), +}; + +static acpi_status intel_xpower_pmic_gpio_handler(u32 function, + acpi_physical_address address, u32 bit_width, u64 *value, + void *handler_context, void *region_context) +{ + return AE_OK; +} + +static int intel_xpower_pmic_opregion_probe(struct platform_device *pdev) +{ + struct device *parent = pdev->dev.parent; + struct axp20x_dev *axp20x = dev_get_drvdata(parent); + acpi_status status; + int result; + + status = acpi_install_address_space_handler(ACPI_HANDLE(parent), + ACPI_ADR_SPACE_GPIO, intel_xpower_pmic_gpio_handler, + NULL, NULL); + if (ACPI_FAILURE(status)) + return -ENODEV; + + result = intel_pmic_install_opregion_handler(&pdev->dev, + ACPI_HANDLE(parent), axp20x->regmap, + &intel_xpower_pmic_opregion_data); + if (result) + acpi_remove_address_space_handler(ACPI_HANDLE(parent), + ACPI_ADR_SPACE_GPIO, + intel_xpower_pmic_gpio_handler); + + return result; +} + +static struct platform_driver intel_xpower_pmic_opregion_driver = { + .probe = intel_xpower_pmic_opregion_probe, + .driver = { + .name = "axp288_pmic_acpi", + }, +}; + +static int __init intel_xpower_pmic_opregion_driver_init(void) +{ + return platform_driver_register(&intel_xpower_pmic_opregion_driver); +} +module_init(intel_xpower_pmic_opregion_driver_init); + +MODULE_DESCRIPTION("XPower AXP288 ACPI operation region driver"); +MODULE_LICENSE("GPL"); |