diff options
Diffstat (limited to 'kernel/drivers/acpi/acpica/utnonansi.c')
| -rw-r--r-- | kernel/drivers/acpi/acpica/utnonansi.c | 380 |
1 files changed, 380 insertions, 0 deletions
diff --git a/kernel/drivers/acpi/acpica/utnonansi.c b/kernel/drivers/acpi/acpica/utnonansi.c new file mode 100644 index 000000000..1d5f6b17b --- /dev/null +++ b/kernel/drivers/acpi/acpica/utnonansi.c @@ -0,0 +1,380 @@ +/******************************************************************************* + * + * Module Name: utnonansi - Non-ansi C library functions + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utnonansi") + +/* + * Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit + * version of strtoul. + */ +/******************************************************************************* + * + * FUNCTION: acpi_ut_strlwr (strlwr) + * + * PARAMETERS: src_string - The source string to convert + * + * RETURN: None + * + * DESCRIPTION: Convert a string to lowercase + * + ******************************************************************************/ +void acpi_ut_strlwr(char *src_string) +{ + char *string; + + ACPI_FUNCTION_ENTRY(); + + if (!src_string) { + return; + } + + /* Walk entire string, lowercasing the letters */ + + for (string = src_string; *string; string++) { + *string = (char)tolower((int)*string); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_strupr (strupr) + * + * PARAMETERS: src_string - The source string to convert + * + * RETURN: None + * + * DESCRIPTION: Convert a string to uppercase + * + ******************************************************************************/ + +void acpi_ut_strupr(char *src_string) +{ + char *string; + + ACPI_FUNCTION_ENTRY(); + + if (!src_string) { + return; + } + + /* Walk entire string, uppercasing the letters */ + + for (string = src_string; *string; string++) { + *string = (char)toupper((int)*string); + } +} + +/****************************************************************************** + * + * FUNCTION: acpi_ut_stricmp (stricmp) + * + * PARAMETERS: string1 - first string to compare + * string2 - second string to compare + * + * RETURN: int that signifies string relationship. Zero means strings + * are equal. + * + * DESCRIPTION: Case-insensitive string compare. Implementation of the + * non-ANSI stricmp function. + * + ******************************************************************************/ + +int acpi_ut_stricmp(char *string1, char *string2) +{ + int c1; + int c2; + + do { + c1 = tolower((int)*string1); + c2 = tolower((int)*string2); + + string1++; + string2++; + } + while ((c1 == c2) && (c1)); + + return (c1 - c2); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_strtoul64 + * + * PARAMETERS: string - Null terminated string + * base - Radix of the string: 16 or ACPI_ANY_BASE; + * ACPI_ANY_BASE means 'in behalf of to_integer' + * ret_integer - Where the converted integer is returned + * + * RETURN: Status and Converted value + * + * DESCRIPTION: Convert a string into an unsigned value. Performs either a + * 32-bit or 64-bit conversion, depending on the current mode + * of the interpreter. + * + * NOTE: Does not support Octal strings, not needed. + * + ******************************************************************************/ + +acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer) +{ + u32 this_digit = 0; + u64 return_value = 0; + u64 quotient; + u64 dividend; + u32 to_integer_op = (base == ACPI_ANY_BASE); + u32 mode32 = (acpi_gbl_integer_byte_width == 4); + u8 valid_digits = 0; + u8 sign_of0x = 0; + u8 term = 0; + + ACPI_FUNCTION_TRACE_STR(ut_stroul64, string); + + switch (base) { + case ACPI_ANY_BASE: + case 16: + + break; + + default: + + /* Invalid Base */ + + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + if (!string) { + goto error_exit; + } + + /* Skip over any white space in the buffer */ + + while ((*string) && (isspace((int)*string) || *string == '\t')) { + string++; + } + + if (to_integer_op) { + /* + * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'. + * We need to determine if it is decimal or hexadecimal. + */ + if ((*string == '0') && (tolower((int)*(string + 1)) == 'x')) { + sign_of0x = 1; + base = 16; + + /* Skip over the leading '0x' */ + string += 2; + } else { + base = 10; + } + } + + /* Any string left? Check that '0x' is not followed by white space. */ + + if (!(*string) || isspace((int)*string) || *string == '\t') { + if (to_integer_op) { + goto error_exit; + } else { + goto all_done; + } + } + + /* + * Perform a 32-bit or 64-bit conversion, depending upon the current + * execution mode of the interpreter + */ + dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX; + + /* Main loop: convert the string to a 32- or 64-bit integer */ + + while (*string) { + if (isdigit((int)*string)) { + + /* Convert ASCII 0-9 to Decimal value */ + + this_digit = ((u8)*string) - '0'; + } else if (base == 10) { + + /* Digit is out of range; possible in to_integer case only */ + + term = 1; + } else { + this_digit = (u8)toupper((int)*string); + if (isxdigit((int)this_digit)) { + + /* Convert ASCII Hex char to value */ + + this_digit = this_digit - 'A' + 10; + } else { + term = 1; + } + } + + if (term) { + if (to_integer_op) { + goto error_exit; + } else { + break; + } + } else if ((valid_digits == 0) && (this_digit == 0) + && !sign_of0x) { + + /* Skip zeros */ + string++; + continue; + } + + valid_digits++; + + if (sign_of0x + && ((valid_digits > 16) + || ((valid_digits > 8) && mode32))) { + /* + * This is to_integer operation case. + * No any restrictions for string-to-integer conversion, + * see ACPI spec. + */ + goto error_exit; + } + + /* Divide the digit into the correct position */ + + (void)acpi_ut_short_divide((dividend - (u64)this_digit), + base, "ient, NULL); + + if (return_value > quotient) { + if (to_integer_op) { + goto error_exit; + } else { + break; + } + } + + return_value *= base; + return_value += this_digit; + string++; + } + + /* All done, normal exit */ + +all_done: + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n", + ACPI_FORMAT_UINT64(return_value))); + + *ret_integer = return_value; + return_ACPI_STATUS(AE_OK); + +error_exit: + /* Base was set/validated above */ + + if (base == 10) { + return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT); + } else { + return_ACPI_STATUS(AE_BAD_HEX_CONSTANT); + } +} + +#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION) +/******************************************************************************* + * + * FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat + * + * PARAMETERS: Adds a "DestSize" parameter to each of the standard string + * functions. This is the size of the Destination buffer. + * + * RETURN: TRUE if the operation would overflow the destination buffer. + * + * DESCRIPTION: Safe versions of standard Clib string functions. Ensure that + * the result of the operation will not overflow the output string + * buffer. + * + * NOTE: These functions are typically only helpful for processing + * user input and command lines. For most ACPICA code, the + * required buffer length is precisely calculated before buffer + * allocation, so the use of these functions is unnecessary. + * + ******************************************************************************/ + +u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source) +{ + + if (strlen(source) >= dest_size) { + return (TRUE); + } + + strcpy(dest, source); + return (FALSE); +} + +u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source) +{ + + if ((strlen(dest) + strlen(source)) >= dest_size) { + return (TRUE); + } + + strcat(dest, source); + return (FALSE); +} + +u8 +acpi_ut_safe_strncat(char *dest, + acpi_size dest_size, + char *source, acpi_size max_transfer_length) +{ + acpi_size actual_transfer_length; + + actual_transfer_length = ACPI_MIN(max_transfer_length, strlen(source)); + + if ((strlen(dest) + actual_transfer_length) >= dest_size) { + return (TRUE); + } + + strncat(dest, source, max_transfer_length); + return (FALSE); +} +#endif |