diff options
Diffstat (limited to 'kernel/drivers/acpi/acpica/nsxfname.c')
| -rw-r--r-- | kernel/drivers/acpi/acpica/nsxfname.c | 663 |
1 files changed, 663 insertions, 0 deletions
diff --git a/kernel/drivers/acpi/acpica/nsxfname.c b/kernel/drivers/acpi/acpica/nsxfname.c new file mode 100644 index 000000000..d66c32648 --- /dev/null +++ b/kernel/drivers/acpi/acpica/nsxfname.c @@ -0,0 +1,663 @@ +/****************************************************************************** + * + * Module Name: nsxfname - Public interfaces to the ACPI subsystem + * ACPI Namespace oriented interfaces + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#define EXPORT_ACPI_INTERFACES + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" +#include "acparser.h" +#include "amlcode.h" + +#define _COMPONENT ACPI_NAMESPACE +ACPI_MODULE_NAME("nsxfname") + +/* Local prototypes */ +static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest, + struct acpi_pnp_device_id *source, + char *string_area); + +/****************************************************************************** + * + * FUNCTION: acpi_get_handle + * + * PARAMETERS: parent - Object to search under (search scope). + * pathname - Pointer to an asciiz string containing the + * name + * ret_handle - Where the return handle is returned + * + * RETURN: Status + * + * DESCRIPTION: This routine will search for a caller specified name in the + * name space. The caller can restrict the search region by + * specifying a non NULL parent. The parent value is itself a + * namespace handle. + * + ******************************************************************************/ + +acpi_status +acpi_get_handle(acpi_handle parent, + acpi_string pathname, acpi_handle * ret_handle) +{ + acpi_status status; + struct acpi_namespace_node *node = NULL; + struct acpi_namespace_node *prefix_node = NULL; + + ACPI_FUNCTION_ENTRY(); + + /* Parameter Validation */ + + if (!ret_handle || !pathname) { + return (AE_BAD_PARAMETER); + } + + /* Convert a parent handle to a prefix node */ + + if (parent) { + prefix_node = acpi_ns_validate_handle(parent); + if (!prefix_node) { + return (AE_BAD_PARAMETER); + } + } + + /* + * Valid cases are: + * 1) Fully qualified pathname + * 2) Parent + Relative pathname + * + * Error for <null Parent + relative path> + */ + if (ACPI_IS_ROOT_PREFIX(pathname[0])) { + + /* Pathname is fully qualified (starts with '\') */ + + /* Special case for root-only, since we can't search for it */ + + if (!ACPI_STRCMP(pathname, ACPI_NS_ROOT_PATH)) { + *ret_handle = + ACPI_CAST_PTR(acpi_handle, acpi_gbl_root_node); + return (AE_OK); + } + } else if (!prefix_node) { + + /* Relative path with null prefix is disallowed */ + + return (AE_BAD_PARAMETER); + } + + /* Find the Node and convert to a handle */ + + status = + acpi_ns_get_node(prefix_node, pathname, ACPI_NS_NO_UPSEARCH, &node); + if (ACPI_SUCCESS(status)) { + *ret_handle = ACPI_CAST_PTR(acpi_handle, node); + } + + return (status); +} + +ACPI_EXPORT_SYMBOL(acpi_get_handle) + +/****************************************************************************** + * + * FUNCTION: acpi_get_name + * + * PARAMETERS: handle - Handle to be converted to a pathname + * name_type - Full pathname or single segment + * buffer - Buffer for returned path + * + * RETURN: Pointer to a string containing the fully qualified Name. + * + * DESCRIPTION: This routine returns the fully qualified name associated with + * the Handle parameter. This and the acpi_pathname_to_handle are + * complementary functions. + * + ******************************************************************************/ +acpi_status +acpi_get_name(acpi_handle handle, u32 name_type, struct acpi_buffer * buffer) +{ + acpi_status status; + struct acpi_namespace_node *node; + char *node_name; + + /* Parameter validation */ + + if (name_type > ACPI_NAME_TYPE_MAX) { + return (AE_BAD_PARAMETER); + } + + status = acpi_ut_validate_buffer(buffer); + if (ACPI_FAILURE(status)) { + return (status); + } + + if (name_type == ACPI_FULL_PATHNAME) { + + /* Get the full pathname (From the namespace root) */ + + status = acpi_ns_handle_to_pathname(handle, buffer); + return (status); + } + + /* + * Wants the single segment ACPI name. + * Validate handle and convert to a namespace Node + */ + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return (status); + } + + node = acpi_ns_validate_handle(handle); + if (!node) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Validate/Allocate/Clear caller buffer */ + + status = acpi_ut_initialize_buffer(buffer, ACPI_PATH_SEGMENT_LENGTH); + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; + } + + /* Just copy the ACPI name from the Node and zero terminate it */ + + node_name = acpi_ut_get_node_name(node); + ACPI_MOVE_NAME(buffer->pointer, node_name); + ((char *)buffer->pointer)[ACPI_NAME_SIZE] = 0; + status = AE_OK; + +unlock_and_exit: + + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return (status); +} + +ACPI_EXPORT_SYMBOL(acpi_get_name) + +/****************************************************************************** + * + * FUNCTION: acpi_ns_copy_device_id + * + * PARAMETERS: dest - Pointer to the destination PNP_DEVICE_ID + * source - Pointer to the source PNP_DEVICE_ID + * string_area - Pointer to where to copy the dest string + * + * RETURN: Pointer to the next string area + * + * DESCRIPTION: Copy a single PNP_DEVICE_ID, including the string data. + * + ******************************************************************************/ +static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest, + struct acpi_pnp_device_id *source, + char *string_area) +{ + + /* Create the destination PNP_DEVICE_ID */ + + dest->string = string_area; + dest->length = source->length; + + /* Copy actual string and return a pointer to the next string area */ + + ACPI_MEMCPY(string_area, source->string, source->length); + return (string_area + source->length); +} + +/****************************************************************************** + * + * FUNCTION: acpi_get_object_info + * + * PARAMETERS: handle - Object Handle + * return_buffer - Where the info is returned + * + * RETURN: Status + * + * DESCRIPTION: Returns information about an object as gleaned from the + * namespace node and possibly by running several standard + * control methods (Such as in the case of a device.) + * + * For Device and Processor objects, run the Device _HID, _UID, _CID, _SUB, + * _STA, _ADR, _sx_w, and _sx_d methods. + * + * Note: Allocates the return buffer, must be freed by the caller. + * + ******************************************************************************/ + +acpi_status +acpi_get_object_info(acpi_handle handle, + struct acpi_device_info **return_buffer) +{ + struct acpi_namespace_node *node; + struct acpi_device_info *info; + struct acpi_pnp_device_id_list *cid_list = NULL; + struct acpi_pnp_device_id *hid = NULL; + struct acpi_pnp_device_id *uid = NULL; + struct acpi_pnp_device_id *sub = NULL; + char *next_id_string; + acpi_object_type type; + acpi_name name; + u8 param_count = 0; + u8 valid = 0; + u32 info_size; + u32 i; + acpi_status status; + + /* Parameter validation */ + + if (!handle || !return_buffer) { + return (AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return (status); + } + + node = acpi_ns_validate_handle(handle); + if (!node) { + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return (AE_BAD_PARAMETER); + } + + /* Get the namespace node data while the namespace is locked */ + + info_size = sizeof(struct acpi_device_info); + type = node->type; + name = node->name.integer; + + if (node->type == ACPI_TYPE_METHOD) { + param_count = node->object->method.param_count; + } + + status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return (status); + } + + if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) { + /* + * Get extra info for ACPI Device/Processor objects only: + * Run the Device _HID, _UID, _SUB, and _CID methods. + * + * Note: none of these methods are required, so they may or may + * not be present for this device. The Info->Valid bitfield is used + * to indicate which methods were found and run successfully. + */ + + /* Execute the Device._HID method */ + + status = acpi_ut_execute_HID(node, &hid); + if (ACPI_SUCCESS(status)) { + info_size += hid->length; + valid |= ACPI_VALID_HID; + } + + /* Execute the Device._UID method */ + + status = acpi_ut_execute_UID(node, &uid); + if (ACPI_SUCCESS(status)) { + info_size += uid->length; + valid |= ACPI_VALID_UID; + } + + /* Execute the Device._SUB method */ + + status = acpi_ut_execute_SUB(node, &sub); + if (ACPI_SUCCESS(status)) { + info_size += sub->length; + valid |= ACPI_VALID_SUB; + } + + /* Execute the Device._CID method */ + + status = acpi_ut_execute_CID(node, &cid_list); + if (ACPI_SUCCESS(status)) { + + /* Add size of CID strings and CID pointer array */ + + info_size += + (cid_list->list_size - + sizeof(struct acpi_pnp_device_id_list)); + valid |= ACPI_VALID_CID; + } + } + + /* + * Now that we have the variable-length data, we can allocate the + * return buffer + */ + info = ACPI_ALLOCATE_ZEROED(info_size); + if (!info) { + status = AE_NO_MEMORY; + goto cleanup; + } + + /* Get the fixed-length data */ + + if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) { + /* + * Get extra info for ACPI Device/Processor objects only: + * Run the _STA, _ADR and, sx_w, and _sx_d methods. + * + * Notes: none of these methods are required, so they may or may + * not be present for this device. The Info->Valid bitfield is used + * to indicate which methods were found and run successfully. + * + * For _STA, if the method does not exist, then (as per the ACPI + * specification), the returned current_status flags will indicate + * that the device is present/functional/enabled. Otherwise, the + * current_status flags reflect the value returned from _STA. + */ + + /* Execute the Device._STA method */ + + status = acpi_ut_execute_STA(node, &info->current_status); + if (ACPI_SUCCESS(status)) { + valid |= ACPI_VALID_STA; + } + + /* Execute the Device._ADR method */ + + status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, node, + &info->address); + if (ACPI_SUCCESS(status)) { + valid |= ACPI_VALID_ADR; + } + + /* Execute the Device._sx_w methods */ + + status = acpi_ut_execute_power_methods(node, + acpi_gbl_lowest_dstate_names, + ACPI_NUM_sx_w_METHODS, + info->lowest_dstates); + if (ACPI_SUCCESS(status)) { + valid |= ACPI_VALID_SXWS; + } + + /* Execute the Device._sx_d methods */ + + status = acpi_ut_execute_power_methods(node, + acpi_gbl_highest_dstate_names, + ACPI_NUM_sx_d_METHODS, + info->highest_dstates); + if (ACPI_SUCCESS(status)) { + valid |= ACPI_VALID_SXDS; + } + } + + /* + * Create a pointer to the string area of the return buffer. + * Point to the end of the base struct acpi_device_info structure. + */ + next_id_string = ACPI_CAST_PTR(char, info->compatible_id_list.ids); + if (cid_list) { + + /* Point past the CID PNP_DEVICE_ID array */ + + next_id_string += + ((acpi_size) cid_list->count * + sizeof(struct acpi_pnp_device_id)); + } + + /* + * Copy the HID, UID, SUB, and CIDs to the return buffer. + * The variable-length strings are copied to the reserved area + * at the end of the buffer. + * + * For HID and CID, check if the ID is a PCI Root Bridge. + */ + if (hid) { + next_id_string = acpi_ns_copy_device_id(&info->hardware_id, + hid, next_id_string); + + if (acpi_ut_is_pci_root_bridge(hid->string)) { + info->flags |= ACPI_PCI_ROOT_BRIDGE; + } + } + + if (uid) { + next_id_string = acpi_ns_copy_device_id(&info->unique_id, + uid, next_id_string); + } + + if (sub) { + next_id_string = acpi_ns_copy_device_id(&info->subsystem_id, + sub, next_id_string); + } + + if (cid_list) { + info->compatible_id_list.count = cid_list->count; + info->compatible_id_list.list_size = cid_list->list_size; + + /* Copy each CID */ + + for (i = 0; i < cid_list->count; i++) { + next_id_string = + acpi_ns_copy_device_id(&info->compatible_id_list. + ids[i], &cid_list->ids[i], + next_id_string); + + if (acpi_ut_is_pci_root_bridge(cid_list->ids[i].string)) { + info->flags |= ACPI_PCI_ROOT_BRIDGE; + } + } + } + + /* Copy the fixed-length data */ + + info->info_size = info_size; + info->type = type; + info->name = name; + info->param_count = param_count; + info->valid = valid; + + *return_buffer = info; + status = AE_OK; + +cleanup: + if (hid) { + ACPI_FREE(hid); + } + if (uid) { + ACPI_FREE(uid); + } + if (sub) { + ACPI_FREE(sub); + } + if (cid_list) { + ACPI_FREE(cid_list); + } + return (status); +} + +ACPI_EXPORT_SYMBOL(acpi_get_object_info) + +/****************************************************************************** + * + * FUNCTION: acpi_install_method + * + * PARAMETERS: buffer - An ACPI table containing one control method + * + * RETURN: Status + * + * DESCRIPTION: Install a control method into the namespace. If the method + * name already exists in the namespace, it is overwritten. The + * input buffer must contain a valid DSDT or SSDT containing a + * single control method. + * + ******************************************************************************/ +acpi_status acpi_install_method(u8 *buffer) +{ + struct acpi_table_header *table = + ACPI_CAST_PTR(struct acpi_table_header, buffer); + u8 *aml_buffer; + u8 *aml_start; + char *path; + struct acpi_namespace_node *node; + union acpi_operand_object *method_obj; + struct acpi_parse_state parser_state; + u32 aml_length; + u16 opcode; + u8 method_flags; + acpi_status status; + + /* Parameter validation */ + + if (!buffer) { + return (AE_BAD_PARAMETER); + } + + /* Table must be a DSDT or SSDT */ + + if (!ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) && + !ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) { + return (AE_BAD_HEADER); + } + + /* First AML opcode in the table must be a control method */ + + parser_state.aml = buffer + sizeof(struct acpi_table_header); + opcode = acpi_ps_peek_opcode(&parser_state); + if (opcode != AML_METHOD_OP) { + return (AE_BAD_PARAMETER); + } + + /* Extract method information from the raw AML */ + + parser_state.aml += acpi_ps_get_opcode_size(opcode); + parser_state.pkg_end = acpi_ps_get_next_package_end(&parser_state); + path = acpi_ps_get_next_namestring(&parser_state); + method_flags = *parser_state.aml++; + aml_start = parser_state.aml; + aml_length = ACPI_PTR_DIFF(parser_state.pkg_end, aml_start); + + /* + * Allocate resources up-front. We don't want to have to delete a new + * node from the namespace if we cannot allocate memory. + */ + aml_buffer = ACPI_ALLOCATE(aml_length); + if (!aml_buffer) { + return (AE_NO_MEMORY); + } + + method_obj = acpi_ut_create_internal_object(ACPI_TYPE_METHOD); + if (!method_obj) { + ACPI_FREE(aml_buffer); + return (AE_NO_MEMORY); + } + + /* Lock namespace for acpi_ns_lookup, we may be creating a new node */ + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + + /* The lookup either returns an existing node or creates a new one */ + + status = + acpi_ns_lookup(NULL, path, ACPI_TYPE_METHOD, ACPI_IMODE_LOAD_PASS1, + ACPI_NS_DONT_OPEN_SCOPE | ACPI_NS_ERROR_IF_FOUND, + NULL, &node); + + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + + if (ACPI_FAILURE(status)) { /* ns_lookup */ + if (status != AE_ALREADY_EXISTS) { + goto error_exit; + } + + /* Node existed previously, make sure it is a method node */ + + if (node->type != ACPI_TYPE_METHOD) { + status = AE_TYPE; + goto error_exit; + } + } + + /* Copy the method AML to the local buffer */ + + ACPI_MEMCPY(aml_buffer, aml_start, aml_length); + + /* Initialize the method object with the new method's information */ + + method_obj->method.aml_start = aml_buffer; + method_obj->method.aml_length = aml_length; + + method_obj->method.param_count = (u8) + (method_flags & AML_METHOD_ARG_COUNT); + + if (method_flags & AML_METHOD_SERIALIZED) { + method_obj->method.info_flags = ACPI_METHOD_SERIALIZED; + + method_obj->method.sync_level = (u8) + ((method_flags & AML_METHOD_SYNC_LEVEL) >> 4); + } + + /* + * Now that it is complete, we can attach the new method object to + * the method Node (detaches/deletes any existing object) + */ + status = acpi_ns_attach_object(node, method_obj, ACPI_TYPE_METHOD); + + /* + * Flag indicates AML buffer is dynamic, must be deleted later. + * Must be set only after attach above. + */ + node->flags |= ANOBJ_ALLOCATED_BUFFER; + + /* Remove local reference to the method object */ + + acpi_ut_remove_reference(method_obj); + return (status); + +error_exit: + + ACPI_FREE(aml_buffer); + ACPI_FREE(method_obj); + return (status); +} +ACPI_EXPORT_SYMBOL(acpi_install_method) |