diff options
Diffstat (limited to 'kernel/drivers/acpi/acpica/nsarguments.c')
| -rw-r--r-- | kernel/drivers/acpi/acpica/nsarguments.c | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/kernel/drivers/acpi/acpica/nsarguments.c b/kernel/drivers/acpi/acpica/nsarguments.c new file mode 100644 index 000000000..5d347a71b --- /dev/null +++ b/kernel/drivers/acpi/acpica/nsarguments.c @@ -0,0 +1,294 @@ +/****************************************************************************** + * + * Module Name: nsarguments - Validation of args for ACPI predefined methods + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" +#include "acpredef.h" + +#define _COMPONENT ACPI_NAMESPACE +ACPI_MODULE_NAME("nsarguments") + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_argument_types + * + * PARAMETERS: info - Method execution information block + * + * RETURN: None + * + * DESCRIPTION: Check the incoming argument count and all argument types + * against the argument type list for a predefined name. + * + ******************************************************************************/ +void acpi_ns_check_argument_types(struct acpi_evaluate_info *info) +{ + u16 arg_type_list; + u8 arg_count; + u8 arg_type; + u8 user_arg_type; + u32 i; + + /* If not a predefined name, cannot typecheck args */ + + if (!info->predefined) { + return; + } + + arg_type_list = info->predefined->info.argument_list; + arg_count = METHOD_GET_ARG_COUNT(arg_type_list); + + /* Typecheck all arguments */ + + for (i = 0; ((i < arg_count) && (i < info->param_count)); i++) { + arg_type = METHOD_GET_NEXT_TYPE(arg_type_list); + user_arg_type = info->parameters[i]->common.type; + + if (user_arg_type != arg_type) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + ACPI_WARN_ALWAYS, + "Argument #%u type mismatch - " + "Found [%s], ACPI requires [%s]", + (i + 1), + acpi_ut_get_type_name + (user_arg_type), + acpi_ut_get_type_name(arg_type))); + } + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_acpi_compliance + * + * PARAMETERS: pathname - Full pathname to the node (for error msgs) + * node - Namespace node for the method/object + * predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that the declared parameter count (in ASL/AML) for a + * predefined name is what is expected (matches what is defined in + * the ACPI specification for this predefined name.) + * + ******************************************************************************/ + +void +acpi_ns_check_acpi_compliance(char *pathname, + struct acpi_namespace_node *node, + const union acpi_predefined_info *predefined) +{ + u32 aml_param_count; + u32 required_param_count; + + if (!predefined) { + return; + } + + /* Get the ACPI-required arg count from the predefined info table */ + + required_param_count = + METHOD_GET_ARG_COUNT(predefined->info.argument_list); + + /* + * If this object is not a control method, we can check if the ACPI + * spec requires that it be a method. + */ + if (node->type != ACPI_TYPE_METHOD) { + if (required_param_count > 0) { + + /* Object requires args, must be implemented as a method */ + + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Object (%s) must be a control method with %u arguments", + acpi_ut_get_type_name(node-> + type), + required_param_count)); + } else if (!required_param_count + && !predefined->info.expected_btypes) { + + /* Object requires no args and no return value, must be a method */ + + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Object (%s) must be a control method " + "with no arguments and no return value", + acpi_ut_get_type_name(node-> + type))); + } + + return; + } + + /* + * This is a control method. + * Check that the ASL/AML-defined parameter count for this method + * matches the ACPI-required parameter count + * + * Some methods are allowed to have a "minimum" number of args (_SCP) + * because their definition in ACPI has changed over time. + * + * Note: These are BIOS errors in the declaration of the object + */ + aml_param_count = node->object->method.param_count; + + if (aml_param_count < required_param_count) { + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "ASL declared %u, ACPI requires %u", + aml_param_count, + required_param_count)); + } else if ((aml_param_count > required_param_count) + && !(predefined->info. + argument_list & ARG_COUNT_IS_MINIMUM)) { + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "ASL declared %u, ACPI requires %u", + aml_param_count, + required_param_count)); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_argument_count + * + * PARAMETERS: pathname - Full pathname to the node (for error msgs) + * node - Namespace node for the method/object + * user_param_count - Number of args passed in by the caller + * predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that incoming argument count matches the declared + * parameter count (in the ASL/AML) for an object. + * + ******************************************************************************/ + +void +acpi_ns_check_argument_count(char *pathname, + struct acpi_namespace_node *node, + u32 user_param_count, + const union acpi_predefined_info *predefined) +{ + u32 aml_param_count; + u32 required_param_count; + + if (!predefined) { + /* + * Not a predefined name. Check the incoming user argument count + * against the count that is specified in the method/object. + */ + if (node->type != ACPI_TYPE_METHOD) { + if (user_param_count) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "%u arguments were passed to a non-method ACPI object (%s)", + user_param_count, + acpi_ut_get_type_name + (node->type))); + } + + return; + } + + /* + * This is a control method. Check the parameter count. + * We can only check the incoming argument count against the + * argument count declared for the method in the ASL/AML. + * + * Emit a message if too few or too many arguments have been passed + * by the caller. + * + * Note: Too many arguments will not cause the method to + * fail. However, the method will fail if there are too few + * arguments and the method attempts to use one of the missing ones. + */ + aml_param_count = node->object->method.param_count; + + if (user_param_count < aml_param_count) { + ACPI_WARN_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "Caller passed %u, method requires %u", + user_param_count, + aml_param_count)); + } else if (user_param_count > aml_param_count) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Excess arguments - " + "Caller passed %u, method requires %u", + user_param_count, + aml_param_count)); + } + + return; + } + + /* + * This is a predefined name. Validate the user-supplied parameter + * count against the ACPI specification. We don't validate against + * the method itself because what is important here is that the + * caller is in conformance with the spec. (The arg count for the + * method was checked against the ACPI spec earlier.) + * + * Some methods are allowed to have a "minimum" number of args (_SCP) + * because their definition in ACPI has changed over time. + */ + required_param_count = + METHOD_GET_ARG_COUNT(predefined->info.argument_list); + + if (user_param_count < required_param_count) { + ACPI_WARN_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "Caller passed %u, ACPI requires %u", + user_param_count, required_param_count)); + } else if ((user_param_count > required_param_count) && + !(predefined->info.argument_list & ARG_COUNT_IS_MINIMUM)) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "Caller passed %u, ACPI requires %u", + user_param_count, required_param_count)); + } +} |