summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/acpi/acpica/exfield.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/acpi/acpica/exfield.c')
-rw-r--r--kernel/drivers/acpi/acpica/exfield.c536
1 files changed, 536 insertions, 0 deletions
diff --git a/kernel/drivers/acpi/acpica/exfield.c b/kernel/drivers/acpi/acpica/exfield.c
new file mode 100644
index 000000000..c161dd974
--- /dev/null
+++ b/kernel/drivers/acpi/acpica/exfield.c
@@ -0,0 +1,536 @@
+/******************************************************************************
+ *
+ * Module Name: exfield - ACPI AML (p-code) execution - field manipulation
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "amlcode.h"
+
+#define _COMPONENT ACPI_EXECUTER
+ACPI_MODULE_NAME("exfield")
+
+/* Local prototypes */
+static u32
+acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_get_serial_access_length
+ *
+ * PARAMETERS: accessor_type - The type of the protocol indicated by region
+ * field access attributes
+ * access_length - The access length of the region field
+ *
+ * RETURN: Decoded access length
+ *
+ * DESCRIPTION: This routine returns the length of the generic_serial_bus
+ * protocol bytes
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length)
+{
+ u32 length;
+
+ switch (accessor_type) {
+ case AML_FIELD_ATTRIB_QUICK:
+
+ length = 0;
+ break;
+
+ case AML_FIELD_ATTRIB_SEND_RCV:
+ case AML_FIELD_ATTRIB_BYTE:
+
+ length = 1;
+ break;
+
+ case AML_FIELD_ATTRIB_WORD:
+ case AML_FIELD_ATTRIB_WORD_CALL:
+
+ length = 2;
+ break;
+
+ case AML_FIELD_ATTRIB_MULTIBYTE:
+ case AML_FIELD_ATTRIB_RAW_BYTES:
+ case AML_FIELD_ATTRIB_RAW_PROCESS:
+
+ length = access_length;
+ break;
+
+ case AML_FIELD_ATTRIB_BLOCK:
+ case AML_FIELD_ATTRIB_BLOCK_CALL:
+ default:
+
+ length = ACPI_GSBUS_BUFFER_SIZE - 2;
+ break;
+ }
+
+ return (length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_read_data_from_field
+ *
+ * PARAMETERS: walk_state - Current execution state
+ * obj_desc - The named field
+ * ret_buffer_desc - Where the return data object is stored
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Read from a named field. Returns either an Integer or a
+ * Buffer, depending on the size of the field.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_read_data_from_field(struct acpi_walk_state * walk_state,
+ union acpi_operand_object *obj_desc,
+ union acpi_operand_object **ret_buffer_desc)
+{
+ acpi_status status;
+ union acpi_operand_object *buffer_desc;
+ acpi_size length;
+ void *buffer;
+ u32 function;
+ u16 accessor_type;
+
+ ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc);
+
+ /* Parameter validation */
+
+ if (!obj_desc) {
+ return_ACPI_STATUS(AE_AML_NO_OPERAND);
+ }
+ if (!ret_buffer_desc) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
+ /*
+ * If the buffer_field arguments have not been previously evaluated,
+ * evaluate them now and save the results.
+ */
+ if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+ status = acpi_ds_get_buffer_field_arguments(obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+ } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+ (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_SMBUS
+ || obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GSBUS
+ || obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_IPMI)) {
+ /*
+ * This is an SMBus, GSBus or IPMI read. We must create a buffer to hold
+ * the data and then directly access the region handler.
+ *
+ * Note: SMBus and GSBus protocol value is passed in upper 16-bits of Function
+ */
+ if (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_SMBUS) {
+ length = ACPI_SMBUS_BUFFER_SIZE;
+ function =
+ ACPI_READ | (obj_desc->field.attribute << 16);
+ } else if (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GSBUS) {
+ accessor_type = obj_desc->field.attribute;
+ length = acpi_ex_get_serial_access_length(accessor_type,
+ obj_desc->
+ field.
+ access_length);
+
+ /*
+ * Add additional 2 bytes for the generic_serial_bus data buffer:
+ *
+ * Status; (Byte 0 of the data buffer)
+ * Length; (Byte 1 of the data buffer)
+ * Data[x-1]; (Bytes 2-x of the arbitrary length data buffer)
+ */
+ length += 2;
+ function = ACPI_READ | (accessor_type << 16);
+ } else { /* IPMI */
+
+ length = ACPI_IPMI_BUFFER_SIZE;
+ function = ACPI_READ;
+ }
+
+ buffer_desc = acpi_ut_create_buffer_object(length);
+ if (!buffer_desc) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ /* Lock entire transaction if requested */
+
+ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+ /* Call the region handler for the read */
+
+ status = acpi_ex_access_region(obj_desc, 0,
+ ACPI_CAST_PTR(u64,
+ buffer_desc->
+ buffer.pointer),
+ function);
+ acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+ goto exit;
+ }
+
+ /*
+ * Allocate a buffer for the contents of the field.
+ *
+ * If the field is larger than the current integer width, create
+ * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
+ * the use of arithmetic operators on the returned value if the
+ * field size is equal or smaller than an Integer.
+ *
+ * Note: Field.length is in bits.
+ */
+ length =
+ (acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length);
+ if (length > acpi_gbl_integer_byte_width) {
+
+ /* Field is too large for an Integer, create a Buffer instead */
+
+ buffer_desc = acpi_ut_create_buffer_object(length);
+ if (!buffer_desc) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+ buffer = buffer_desc->buffer.pointer;
+ } else {
+ /* Field will fit within an Integer (normal case) */
+
+ buffer_desc = acpi_ut_create_integer_object((u64) 0);
+ if (!buffer_desc) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ length = acpi_gbl_integer_byte_width;
+ buffer = &buffer_desc->integer.value;
+ }
+
+ if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+ (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GPIO)) {
+ /*
+ * For GPIO (general_purpose_io), the Address will be the bit offset
+ * from the previous Connection() operator, making it effectively a
+ * pin number index. The bit_length is the length of the field, which
+ * is thus the number of pins.
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "GPIO FieldRead [FROM]: Pin %u Bits %u\n",
+ obj_desc->field.pin_number_index,
+ obj_desc->field.bit_length));
+
+ /* Lock entire transaction if requested */
+
+ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+ /* Perform the write */
+
+ status = acpi_ex_access_region(obj_desc, 0,
+ (u64 *)buffer, ACPI_READ);
+ acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+ if (ACPI_FAILURE(status)) {
+ acpi_ut_remove_reference(buffer_desc);
+ } else {
+ *ret_buffer_desc = buffer_desc;
+ }
+ return_ACPI_STATUS(status);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n",
+ obj_desc, obj_desc->common.type, buffer,
+ (u32) length));
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n",
+ obj_desc->common_field.bit_length,
+ obj_desc->common_field.start_field_bit_offset,
+ obj_desc->common_field.base_byte_offset));
+
+ /* Lock entire transaction if requested */
+
+ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+ /* Read from the field */
+
+ status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length);
+ acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+exit:
+ if (ACPI_FAILURE(status)) {
+ acpi_ut_remove_reference(buffer_desc);
+ } else {
+ *ret_buffer_desc = buffer_desc;
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_write_data_to_field
+ *
+ * PARAMETERS: source_desc - Contains data to write
+ * obj_desc - The named field
+ * result_desc - Where the return value is returned, if any
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Write to a named field
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
+ union acpi_operand_object *obj_desc,
+ union acpi_operand_object **result_desc)
+{
+ acpi_status status;
+ u32 length;
+ void *buffer;
+ union acpi_operand_object *buffer_desc;
+ u32 function;
+ u16 accessor_type;
+
+ ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc);
+
+ /* Parameter validation */
+
+ if (!source_desc || !obj_desc) {
+ return_ACPI_STATUS(AE_AML_NO_OPERAND);
+ }
+
+ if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
+ /*
+ * If the buffer_field arguments have not been previously evaluated,
+ * evaluate them now and save the results.
+ */
+ if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+ status = acpi_ds_get_buffer_field_arguments(obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+ } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+ (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_SMBUS
+ || obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GSBUS
+ || obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_IPMI)) {
+ /*
+ * This is an SMBus, GSBus or IPMI write. We will bypass the entire field
+ * mechanism and handoff the buffer directly to the handler. For
+ * these address spaces, the buffer is bi-directional; on a write,
+ * return data is returned in the same buffer.
+ *
+ * Source must be a buffer of sufficient size:
+ * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
+ *
+ * Note: SMBus and GSBus protocol type is passed in upper 16-bits of Function
+ */
+ if (source_desc->common.type != ACPI_TYPE_BUFFER) {
+ ACPI_ERROR((AE_INFO,
+ "SMBus/IPMI/GenericSerialBus write requires Buffer, found type %s",
+ acpi_ut_get_object_type_name(source_desc)));
+
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ }
+
+ if (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_SMBUS) {
+ length = ACPI_SMBUS_BUFFER_SIZE;
+ function =
+ ACPI_WRITE | (obj_desc->field.attribute << 16);
+ } else if (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GSBUS) {
+ accessor_type = obj_desc->field.attribute;
+ length = acpi_ex_get_serial_access_length(accessor_type,
+ obj_desc->
+ field.
+ access_length);
+
+ /*
+ * Add additional 2 bytes for the generic_serial_bus data buffer:
+ *
+ * Status; (Byte 0 of the data buffer)
+ * Length; (Byte 1 of the data buffer)
+ * Data[x-1]; (Bytes 2-x of the arbitrary length data buffer)
+ */
+ length += 2;
+ function = ACPI_WRITE | (accessor_type << 16);
+ } else { /* IPMI */
+
+ length = ACPI_IPMI_BUFFER_SIZE;
+ function = ACPI_WRITE;
+ }
+
+ if (source_desc->buffer.length < length) {
+ ACPI_ERROR((AE_INFO,
+ "SMBus/IPMI/GenericSerialBus write requires Buffer of length %u, found length %u",
+ length, source_desc->buffer.length));
+
+ return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
+ }
+
+ /* Create the bi-directional buffer */
+
+ buffer_desc = acpi_ut_create_buffer_object(length);
+ if (!buffer_desc) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ buffer = buffer_desc->buffer.pointer;
+ ACPI_MEMCPY(buffer, source_desc->buffer.pointer, length);
+
+ /* Lock entire transaction if requested */
+
+ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+ /*
+ * Perform the write (returns status and perhaps data in the
+ * same buffer)
+ */
+ status = acpi_ex_access_region(obj_desc, 0,
+ (u64 *) buffer, function);
+ acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+ *result_desc = buffer_desc;
+ return_ACPI_STATUS(status);
+ } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+ (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GPIO)) {
+ /*
+ * For GPIO (general_purpose_io), we will bypass the entire field
+ * mechanism and handoff the bit address and bit width directly to
+ * the handler. The Address will be the bit offset
+ * from the previous Connection() operator, making it effectively a
+ * pin number index. The bit_length is the length of the field, which
+ * is thus the number of pins.
+ */
+ if (source_desc->common.type != ACPI_TYPE_INTEGER) {
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "GPIO FieldWrite [FROM]: (%s:%X), Val %.8X [TO]: Pin %u Bits %u\n",
+ acpi_ut_get_type_name(source_desc->common.
+ type),
+ source_desc->common.type,
+ (u32)source_desc->integer.value,
+ obj_desc->field.pin_number_index,
+ obj_desc->field.bit_length));
+
+ buffer = &source_desc->integer.value;
+
+ /* Lock entire transaction if requested */
+
+ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+ /* Perform the write */
+
+ status = acpi_ex_access_region(obj_desc, 0,
+ (u64 *)buffer, ACPI_WRITE);
+ acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+ return_ACPI_STATUS(status);
+ }
+
+ /* Get a pointer to the data to be written */
+
+ switch (source_desc->common.type) {
+ case ACPI_TYPE_INTEGER:
+
+ buffer = &source_desc->integer.value;
+ length = sizeof(source_desc->integer.value);
+ break;
+
+ case ACPI_TYPE_BUFFER:
+
+ buffer = source_desc->buffer.pointer;
+ length = source_desc->buffer.length;
+ break;
+
+ case ACPI_TYPE_STRING:
+
+ buffer = source_desc->string.pointer;
+ length = source_desc->string.length;
+ break;
+
+ default:
+
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n",
+ source_desc,
+ acpi_ut_get_type_name(source_desc->common.type),
+ source_desc->common.type, buffer, length));
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n",
+ obj_desc,
+ acpi_ut_get_type_name(obj_desc->common.type),
+ obj_desc->common.type,
+ obj_desc->common_field.bit_length,
+ obj_desc->common_field.start_field_bit_offset,
+ obj_desc->common_field.base_byte_offset));
+
+ /* Lock entire transaction if requested */
+
+ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+ /* Write to the field */
+
+ status = acpi_ex_insert_into_field(obj_desc, buffer, length);
+ acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+ return_ACPI_STATUS(status);
+}