diff options
Diffstat (limited to 'kernel/arch/x86/realmode/rm')
20 files changed, 929 insertions, 0 deletions
diff --git a/kernel/arch/x86/realmode/rm/.gitignore b/kernel/arch/x86/realmode/rm/.gitignore new file mode 100644 index 000000000..b6ed3a255 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/.gitignore @@ -0,0 +1,3 @@ +pasyms.h +realmode.lds +realmode.relocs diff --git a/kernel/arch/x86/realmode/rm/Makefile b/kernel/arch/x86/realmode/rm/Makefile new file mode 100644 index 000000000..2730d775e --- /dev/null +++ b/kernel/arch/x86/realmode/rm/Makefile @@ -0,0 +1,72 @@ +# +# arch/x86/realmode/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# +KASAN_SANITIZE := n + +always := realmode.bin realmode.relocs + +wakeup-objs := wakeup_asm.o wakemain.o video-mode.o +wakeup-objs += copy.o bioscall.o regs.o +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +wakeup-objs += video-vga.o +wakeup-objs += video-vesa.o +wakeup-objs += video-bios.o + +realmode-y += header.o +realmode-y += trampoline_$(BITS).o +realmode-y += stack.o +realmode-y += reboot.o +realmode-$(CONFIG_ACPI_SLEEP) += $(wakeup-objs) + +targets += $(realmode-y) + +REALMODE_OBJS = $(addprefix $(obj)/,$(realmode-y)) + +sed-pasyms := -n -r -e 's/^([0-9a-fA-F]+) [ABCDGRSTVW] (.+)$$/pa_\2 = \2;/p' + +quiet_cmd_pasyms = PASYMS $@ + cmd_pasyms = $(NM) $(filter-out FORCE,$^) | \ + sed $(sed-pasyms) | sort | uniq > $@ + +targets += pasyms.h +$(obj)/pasyms.h: $(REALMODE_OBJS) FORCE + $(call if_changed,pasyms) + +targets += realmode.lds +$(obj)/realmode.lds: $(obj)/pasyms.h + +LDFLAGS_realmode.elf := --emit-relocs -T +CPPFLAGS_realmode.lds += -P -C -I$(obj) + +targets += realmode.elf +$(obj)/realmode.elf: $(obj)/realmode.lds $(REALMODE_OBJS) FORCE + $(call if_changed,ld) + +OBJCOPYFLAGS_realmode.bin := -O binary + +targets += realmode.bin +$(obj)/realmode.bin: $(obj)/realmode.elf $(obj)/realmode.relocs FORCE + $(call if_changed,objcopy) + @: + +quiet_cmd_relocs = RELOCS $@ + cmd_relocs = arch/x86/tools/relocs --realmode $< > $@ + +targets += realmode.relocs +$(obj)/realmode.relocs: $(obj)/realmode.elf FORCE + $(call if_changed,relocs) + +# --------------------------------------------------------------------------- + +KBUILD_CFLAGS := $(LINUXINCLUDE) $(REALMODE_CFLAGS) -D_SETUP -D_WAKEUP \ + -I$(srctree)/arch/x86/boot +KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +GCOV_PROFILE := n diff --git a/kernel/arch/x86/realmode/rm/bioscall.S b/kernel/arch/x86/realmode/rm/bioscall.S new file mode 100644 index 000000000..16162d197 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/bioscall.S @@ -0,0 +1 @@ +#include "../../boot/bioscall.S" diff --git a/kernel/arch/x86/realmode/rm/copy.S b/kernel/arch/x86/realmode/rm/copy.S new file mode 100644 index 000000000..b785e6f38 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/copy.S @@ -0,0 +1 @@ +#include "../../boot/copy.S" diff --git a/kernel/arch/x86/realmode/rm/header.S b/kernel/arch/x86/realmode/rm/header.S new file mode 100644 index 000000000..a28221d94 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/header.S @@ -0,0 +1,43 @@ +/* + * Real-mode blob header; this should match realmode.h and be + * readonly; for mutable data instead add pointers into the .data + * or .bss sections as appropriate. + */ + +#include <linux/linkage.h> +#include <asm/page_types.h> +#include <asm/segment.h> + +#include "realmode.h" + + .section ".header", "a" + + .balign 16 +GLOBAL(real_mode_header) + .long pa_text_start + .long pa_ro_end + /* SMP trampoline */ + .long pa_trampoline_start + .long pa_trampoline_status + .long pa_trampoline_header +#ifdef CONFIG_X86_64 + .long pa_trampoline_pgd; +#endif + /* ACPI S3 wakeup */ +#ifdef CONFIG_ACPI_SLEEP + .long pa_wakeup_start + .long pa_wakeup_header +#endif + /* APM/BIOS reboot */ + .long pa_machine_real_restart_asm +#ifdef CONFIG_X86_64 + .long __KERNEL32_CS +#endif +END(real_mode_header) + + /* End signature, used to verify integrity */ + .section ".signature","a" + .balign 4 +GLOBAL(end_signature) + .long REALMODE_END_SIGNATURE +END(end_signature) diff --git a/kernel/arch/x86/realmode/rm/realmode.h b/kernel/arch/x86/realmode/rm/realmode.h new file mode 100644 index 000000000..d74cff635 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/realmode.h @@ -0,0 +1,21 @@ +#ifndef ARCH_X86_REALMODE_RM_REALMODE_H +#define ARCH_X86_REALMODE_RM_REALMODE_H + +#ifdef __ASSEMBLY__ + +/* + * 16-bit ljmpw to the real_mode_seg + * + * This must be open-coded since gas will choke on using a + * relocatable symbol for the segment portion. + */ +#define LJMPW_RM(to) .byte 0xea ; .word (to), real_mode_seg + +#endif /* __ASSEMBLY__ */ + +/* + * Signature at the end of the realmode region + */ +#define REALMODE_END_SIGNATURE 0x65a22c82 + +#endif /* ARCH_X86_REALMODE_RM_REALMODE_H */ diff --git a/kernel/arch/x86/realmode/rm/realmode.lds.S b/kernel/arch/x86/realmode/rm/realmode.lds.S new file mode 100644 index 000000000..86b2e8d6b --- /dev/null +++ b/kernel/arch/x86/realmode/rm/realmode.lds.S @@ -0,0 +1,76 @@ +/* + * realmode.lds.S + * + * Linker script for the real-mode code + */ + +#include <asm/page_types.h> + +#undef i386 + +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) + +SECTIONS +{ + real_mode_seg = 0; + + . = 0; + .header : { + pa_real_mode_base = .; + *(.header) + } + + . = ALIGN(4); + .rodata : { + *(.rodata) + *(.rodata.*) + . = ALIGN(16); + video_cards = .; + *(.videocards) + video_cards_end = .; + } + + . = ALIGN(PAGE_SIZE); + pa_text_start = .; + .text : { + *(.text) + *(.text.*) + } + + .text32 : { + *(.text32) + *(.text32.*) + } + + .text64 : { + *(.text64) + *(.text64.*) + } + pa_ro_end = .; + + . = ALIGN(PAGE_SIZE); + .data : { + *(.data) + *(.data.*) + } + + . = ALIGN(128); + .bss : { + *(.bss*) + } + + /* End signature for integrity checking */ + . = ALIGN(4); + .signature : { + *(.signature) + } + + /DISCARD/ : { + *(.note*) + *(.debug*) + *(.eh_frame*) + } + +#include "pasyms.h" +} diff --git a/kernel/arch/x86/realmode/rm/reboot.S b/kernel/arch/x86/realmode/rm/reboot.S new file mode 100644 index 000000000..d66c607bd --- /dev/null +++ b/kernel/arch/x86/realmode/rm/reboot.S @@ -0,0 +1,155 @@ +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/page_types.h> +#include <asm/processor-flags.h> +#include <asm/msr-index.h> +#include "realmode.h" + +/* + * The following code and data reboots the machine by switching to real + * mode and jumping to the BIOS reset entry point, as if the CPU has + * really been reset. The previous version asked the keyboard + * controller to pulse the CPU reset line, which is more thorough, but + * doesn't work with at least one type of 486 motherboard. It is easy + * to stop this code working; hence the copious comments. + * + * This code is called with the restart type (0 = BIOS, 1 = APM) in + * the primary argument register (%eax for 32 bit, %edi for 64 bit). + */ + .section ".text32", "ax" + .code32 +ENTRY(machine_real_restart_asm) + +#ifdef CONFIG_X86_64 + /* Switch to trampoline GDT as it is guaranteed < 4 GiB */ + movl $__KERNEL_DS, %eax + movl %eax, %ds + lgdtl pa_tr_gdt + + /* Disable paging to drop us out of long mode */ + movl %cr0, %eax + andl $~X86_CR0_PG, %eax + movl %eax, %cr0 + ljmpl $__KERNEL32_CS, $pa_machine_real_restart_paging_off + +GLOBAL(machine_real_restart_paging_off) + xorl %eax, %eax + xorl %edx, %edx + movl $MSR_EFER, %ecx + wrmsr + + movl %edi, %eax + +#endif /* CONFIG_X86_64 */ + + /* Set up the IDT for real mode. */ + lidtl pa_machine_real_restart_idt + + /* + * Set up a GDT from which we can load segment descriptors for real + * mode. The GDT is not used in real mode; it is just needed here to + * prepare the descriptors. + */ + lgdtl pa_machine_real_restart_gdt + + /* + * Load the data segment registers with 16-bit compatible values + */ + movl $16, %ecx + movl %ecx, %ds + movl %ecx, %es + movl %ecx, %fs + movl %ecx, %gs + movl %ecx, %ss + ljmpw $8, $1f + +/* + * This is 16-bit protected mode code to disable paging and the cache, + * switch to real mode and jump to the BIOS reset code. + * + * The instruction that switches to real mode by writing to CR0 must be + * followed immediately by a far jump instruction, which set CS to a + * valid value for real mode, and flushes the prefetch queue to avoid + * running instructions that have already been decoded in protected + * mode. + * + * Clears all the flags except ET, especially PG (paging), PE + * (protected-mode enable) and TS (task switch for coprocessor state + * save). Flushes the TLB after paging has been disabled. Sets CD and + * NW, to disable the cache on a 486, and invalidates the cache. This + * is more like the state of a 486 after reset. I don't know if + * something else should be done for other chips. + * + * More could be done here to set up the registers as if a CPU reset had + * occurred; hopefully real BIOSs don't assume much. This is not the + * actual BIOS entry point, anyway (that is at 0xfffffff0). + * + * Most of this work is probably excessive, but it is what is tested. + */ + .text + .code16 + + .balign 16 +machine_real_restart_asm16: +1: + xorl %ecx, %ecx + movl %cr0, %edx + andl $0x00000011, %edx + orl $0x60000000, %edx + movl %edx, %cr0 + movl %ecx, %cr3 + movl %cr0, %edx + testl $0x60000000, %edx /* If no cache bits -> no wbinvd */ + jz 2f + wbinvd +2: + andb $0x10, %dl + movl %edx, %cr0 + LJMPW_RM(3f) +3: + andw %ax, %ax + jz bios + +apm: + movw $0x1000, %ax + movw %ax, %ss + movw $0xf000, %sp + movw $0x5307, %ax + movw $0x0001, %bx + movw $0x0003, %cx + int $0x15 + /* This should never return... */ + +bios: + ljmpw $0xf000, $0xfff0 + + .section ".rodata", "a" + + .balign 16 +GLOBAL(machine_real_restart_idt) + .word 0xffff /* Length - real mode default value */ + .long 0 /* Base - real mode default value */ +END(machine_real_restart_idt) + + .balign 16 +GLOBAL(machine_real_restart_gdt) + /* Self-pointer */ + .word 0xffff /* Length - real mode default value */ + .long pa_machine_real_restart_gdt + .word 0 + + /* + * 16-bit code segment pointing to real_mode_seg + * Selector value 8 + */ + .word 0xffff /* Limit */ + .long 0x9b000000 + pa_real_mode_base + .word 0 + + /* + * 16-bit data segment with the selector value 16 = 0x10 and + * base value 0x100; since this is consistent with real mode + * semantics we don't have to reload the segments once CR0.PE = 0. + */ + .quad GDT_ENTRY(0x0093, 0x100, 0xffff) +END(machine_real_restart_gdt) diff --git a/kernel/arch/x86/realmode/rm/regs.c b/kernel/arch/x86/realmode/rm/regs.c new file mode 100644 index 000000000..fbb15b9f9 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/regs.c @@ -0,0 +1 @@ +#include "../../boot/regs.c" diff --git a/kernel/arch/x86/realmode/rm/stack.S b/kernel/arch/x86/realmode/rm/stack.S new file mode 100644 index 000000000..867ae87ad --- /dev/null +++ b/kernel/arch/x86/realmode/rm/stack.S @@ -0,0 +1,19 @@ +/* + * Common heap and stack allocations + */ + +#include <linux/linkage.h> + + .data +GLOBAL(HEAP) + .long rm_heap +GLOBAL(heap_end) + .long rm_stack + + .bss + .balign 16 +GLOBAL(rm_heap) + .space 2048 +GLOBAL(rm_stack) + .space 2048 +GLOBAL(rm_stack_end) diff --git a/kernel/arch/x86/realmode/rm/trampoline_32.S b/kernel/arch/x86/realmode/rm/trampoline_32.S new file mode 100644 index 000000000..48ddd76bc --- /dev/null +++ b/kernel/arch/x86/realmode/rm/trampoline_32.S @@ -0,0 +1,73 @@ +/* + * + * Trampoline.S Derived from Setup.S by Linus Torvalds + * + * 4 Jan 1997 Michael Chastain: changed to gnu as. + * + * This is only used for booting secondary CPUs in SMP machine + * + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the + * trampoline page to make our stack and everything else + * is a mystery. + * + * We jump into arch/x86/kernel/head_32.S. + * + * On entry to trampoline_start, the processor is in real mode + * with 16-bit addressing and 16-bit data. CS has some value + * and IP is zero. Thus, we load CS to the physical segment + * of the real mode code before doing anything further. + */ + +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/page_types.h> +#include "realmode.h" + + .text + .code16 + + .balign PAGE_SIZE +ENTRY(trampoline_start) + wbinvd # Needed for NUMA-Q should be harmless for others + + LJMPW_RM(1f) +1: + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + + cli # We should be safe anyway + + movl tr_start, %eax # where we need to go + + movl $0xA5A5A5A5, trampoline_status + # write marker for master knows we're running + + /* + * GDT tables in non default location kernel can be beyond 16MB and + * lgdt will not be able to load the address as in real mode default + * operand size is 16bit. Use lgdtl instead to force operand size + * to 32 bit. + */ + lidtl tr_idt # load idt with 0, 0 + lgdtl tr_gdt # load gdt with whatever is appropriate + + movw $1, %dx # protected mode (PE) bit + lmsw %dx # into protected mode + + ljmpl $__BOOT_CS, $pa_startup_32 + + .section ".text32","ax" + .code32 +ENTRY(startup_32) # note: also used from wakeup_asm.S + jmp *%eax + + .bss + .balign 8 +GLOBAL(trampoline_header) + tr_start: .space 4 + tr_gdt_pad: .space 2 + tr_gdt: .space 6 +END(trampoline_header) + +#include "trampoline_common.S" diff --git a/kernel/arch/x86/realmode/rm/trampoline_64.S b/kernel/arch/x86/realmode/rm/trampoline_64.S new file mode 100644 index 000000000..dac7b20d2 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/trampoline_64.S @@ -0,0 +1,152 @@ +/* + * + * Trampoline.S Derived from Setup.S by Linus Torvalds + * + * 4 Jan 1997 Michael Chastain: changed to gnu as. + * 15 Sept 2005 Eric Biederman: 64bit PIC support + * + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the + * trampoline page to make our stack and everything else + * is a mystery. + * + * On entry to trampoline_start, the processor is in real mode + * with 16-bit addressing and 16-bit data. CS has some value + * and IP is zero. Thus, data addresses need to be absolute + * (no relocation) and are taken with regard to r_base. + * + * With the addition of trampoline_level4_pgt this code can + * now enter a 64bit kernel that lives at arbitrary 64bit + * physical addresses. + * + * If you work on this file, check the object module with objdump + * --full-contents --reloc to make sure there are no relocation + * entries. + */ + +#include <linux/linkage.h> +#include <asm/pgtable_types.h> +#include <asm/page_types.h> +#include <asm/msr.h> +#include <asm/segment.h> +#include <asm/processor-flags.h> +#include "realmode.h" + + .text + .code16 + + .balign PAGE_SIZE +ENTRY(trampoline_start) + cli # We should be safe anyway + wbinvd + + LJMPW_RM(1f) +1: + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + mov %ax, %es + mov %ax, %ss + + movl $0xA5A5A5A5, trampoline_status + # write marker for master knows we're running + + # Setup stack + movl $rm_stack_end, %esp + + call verify_cpu # Verify the cpu supports long mode + testl %eax, %eax # Check for return code + jnz no_longmode + + /* + * GDT tables in non default location kernel can be beyond 16MB and + * lgdt will not be able to load the address as in real mode default + * operand size is 16bit. Use lgdtl instead to force operand size + * to 32 bit. + */ + + lidtl tr_idt # load idt with 0, 0 + lgdtl tr_gdt # load gdt with whatever is appropriate + + movw $__KERNEL_DS, %dx # Data segment descriptor + + # Enable protected mode + movl $X86_CR0_PE, %eax # protected mode (PE) bit + movl %eax, %cr0 # into protected mode + + # flush prefetch and jump to startup_32 + ljmpl $__KERNEL32_CS, $pa_startup_32 + +no_longmode: + hlt + jmp no_longmode +#include "../kernel/verify_cpu.S" + + .section ".text32","ax" + .code32 + .balign 4 +ENTRY(startup_32) + movl %edx, %ss + addl $pa_real_mode_base, %esp + movl %edx, %ds + movl %edx, %es + movl %edx, %fs + movl %edx, %gs + + movl pa_tr_cr4, %eax + movl %eax, %cr4 # Enable PAE mode + + # Setup trampoline 4 level pagetables + movl $pa_trampoline_pgd, %eax + movl %eax, %cr3 + + # Set up EFER + movl pa_tr_efer, %eax + movl pa_tr_efer + 4, %edx + movl $MSR_EFER, %ecx + wrmsr + + # Enable paging and in turn activate Long Mode + movl $(X86_CR0_PG | X86_CR0_WP | X86_CR0_PE), %eax + movl %eax, %cr0 + + /* + * At this point we're in long mode but in 32bit compatibility mode + * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn + * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + */ + ljmpl $__KERNEL_CS, $pa_startup_64 + + .section ".text64","ax" + .code64 + .balign 4 +ENTRY(startup_64) + # Now jump into the kernel using virtual addresses + jmpq *tr_start(%rip) + + .section ".rodata","a" + # Duplicate the global descriptor table + # so the kernel can live anywhere + .balign 16 + .globl tr_gdt +tr_gdt: + .short tr_gdt_end - tr_gdt - 1 # gdt limit + .long pa_tr_gdt + .short 0 + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS +tr_gdt_end: + + .bss + .balign PAGE_SIZE +GLOBAL(trampoline_pgd) .space PAGE_SIZE + + .balign 8 +GLOBAL(trampoline_header) + tr_start: .space 8 + GLOBAL(tr_efer) .space 8 + GLOBAL(tr_cr4) .space 4 +END(trampoline_header) + +#include "trampoline_common.S" diff --git a/kernel/arch/x86/realmode/rm/trampoline_common.S b/kernel/arch/x86/realmode/rm/trampoline_common.S new file mode 100644 index 000000000..b1ecdb969 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/trampoline_common.S @@ -0,0 +1,7 @@ + .section ".rodata","a" + .balign 16 +tr_idt: .fill 1, 6, 0 + + .bss + .balign 4 +GLOBAL(trampoline_status) .space 4 diff --git a/kernel/arch/x86/realmode/rm/video-bios.c b/kernel/arch/x86/realmode/rm/video-bios.c new file mode 100644 index 000000000..848b25aaf --- /dev/null +++ b/kernel/arch/x86/realmode/rm/video-bios.c @@ -0,0 +1 @@ +#include "../../boot/video-bios.c" diff --git a/kernel/arch/x86/realmode/rm/video-mode.c b/kernel/arch/x86/realmode/rm/video-mode.c new file mode 100644 index 000000000..2a98b7e23 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/video-mode.c @@ -0,0 +1 @@ +#include "../../boot/video-mode.c" diff --git a/kernel/arch/x86/realmode/rm/video-vesa.c b/kernel/arch/x86/realmode/rm/video-vesa.c new file mode 100644 index 000000000..413edddb5 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/video-vesa.c @@ -0,0 +1 @@ +#include "../../boot/video-vesa.c" diff --git a/kernel/arch/x86/realmode/rm/video-vga.c b/kernel/arch/x86/realmode/rm/video-vga.c new file mode 100644 index 000000000..3085f5c9d --- /dev/null +++ b/kernel/arch/x86/realmode/rm/video-vga.c @@ -0,0 +1 @@ +#include "../../boot/video-vga.c" diff --git a/kernel/arch/x86/realmode/rm/wakemain.c b/kernel/arch/x86/realmode/rm/wakemain.c new file mode 100644 index 000000000..91405d515 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/wakemain.c @@ -0,0 +1,82 @@ +#include "wakeup.h" +#include "boot.h" + +static void udelay(int loops) +{ + while (loops--) + io_delay(); /* Approximately 1 us */ +} + +static void beep(unsigned int hz) +{ + u8 enable; + + if (!hz) { + enable = 0x00; /* Turn off speaker */ + } else { + u16 div = 1193181/hz; + + outb(0xb6, 0x43); /* Ctr 2, squarewave, load, binary */ + io_delay(); + outb(div, 0x42); /* LSB of counter */ + io_delay(); + outb(div >> 8, 0x42); /* MSB of counter */ + io_delay(); + + enable = 0x03; /* Turn on speaker */ + } + inb(0x61); /* Dummy read of System Control Port B */ + io_delay(); + outb(enable, 0x61); /* Enable timer 2 output to speaker */ + io_delay(); +} + +#define DOT_HZ 880 +#define DASH_HZ 587 +#define US_PER_DOT 125000 + +/* Okay, this is totally silly, but it's kind of fun. */ +static void send_morse(const char *pattern) +{ + char s; + + while ((s = *pattern++)) { + switch (s) { + case '.': + beep(DOT_HZ); + udelay(US_PER_DOT); + beep(0); + udelay(US_PER_DOT); + break; + case '-': + beep(DASH_HZ); + udelay(US_PER_DOT * 3); + beep(0); + udelay(US_PER_DOT); + break; + default: /* Assume it's a space */ + udelay(US_PER_DOT * 3); + break; + } + } +} + +void main(void) +{ + /* Kill machine if structures are wrong */ + if (wakeup_header.real_magic != 0x12345678) + while (1) + ; + + if (wakeup_header.realmode_flags & 4) + send_morse("...-"); + + if (wakeup_header.realmode_flags & 1) + asm volatile("lcallw $0xc000,$3"); + + if (wakeup_header.realmode_flags & 2) { + /* Need to call BIOS */ + probe_cards(0); + set_mode(wakeup_header.video_mode); + } +} diff --git a/kernel/arch/x86/realmode/rm/wakeup.h b/kernel/arch/x86/realmode/rm/wakeup.h new file mode 100644 index 000000000..7dd86a419 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/wakeup.h @@ -0,0 +1,42 @@ +/* + * Definitions for the wakeup data structure at the head of the + * wakeup code. + */ + +#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H +#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H + +#ifndef __ASSEMBLY__ +#include <linux/types.h> + +/* This must match data at wakeup.S */ +struct wakeup_header { + u16 video_mode; /* Video mode number */ + u32 pmode_entry; /* Protected mode resume point, 32-bit only */ + u16 pmode_cs; + u32 pmode_cr0; /* Protected mode cr0 */ + u32 pmode_cr3; /* Protected mode cr3 */ + u32 pmode_cr4; /* Protected mode cr4 */ + u32 pmode_efer_low; /* Protected mode EFER */ + u32 pmode_efer_high; + u64 pmode_gdt; + u32 pmode_misc_en_low; /* Protected mode MISC_ENABLE */ + u32 pmode_misc_en_high; + u32 pmode_behavior; /* Wakeup routine behavior flags */ + u32 realmode_flags; + u32 real_magic; + u32 signature; /* To check we have correct structure */ +} __attribute__((__packed__)); + +extern struct wakeup_header wakeup_header; +#endif + +#define WAKEUP_HEADER_OFFSET 8 +#define WAKEUP_HEADER_SIGNATURE 0x51ee1111 + +/* Wakeup behavior bits */ +#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE 0 +#define WAKEUP_BEHAVIOR_RESTORE_CR4 1 +#define WAKEUP_BEHAVIOR_RESTORE_EFER 2 + +#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/kernel/arch/x86/realmode/rm/wakeup_asm.S b/kernel/arch/x86/realmode/rm/wakeup_asm.S new file mode 100644 index 000000000..9e7e14797 --- /dev/null +++ b/kernel/arch/x86/realmode/rm/wakeup_asm.S @@ -0,0 +1,177 @@ +/* + * ACPI wakeup real mode startup stub + */ +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/msr-index.h> +#include <asm/page_types.h> +#include <asm/pgtable_types.h> +#include <asm/processor-flags.h> +#include "realmode.h" +#include "wakeup.h" + + .code16 + +/* This should match the structure in wakeup.h */ + .section ".data", "aw" + + .balign 16 +GLOBAL(wakeup_header) + video_mode: .short 0 /* Video mode number */ + pmode_entry: .long 0 + pmode_cs: .short __KERNEL_CS + pmode_cr0: .long 0 /* Saved %cr0 */ + pmode_cr3: .long 0 /* Saved %cr3 */ + pmode_cr4: .long 0 /* Saved %cr4 */ + pmode_efer: .quad 0 /* Saved EFER */ + pmode_gdt: .quad 0 + pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ + pmode_behavior: .long 0 /* Wakeup behavior flags */ + realmode_flags: .long 0 + real_magic: .long 0 + signature: .long WAKEUP_HEADER_SIGNATURE +END(wakeup_header) + + .text + .code16 + + .balign 16 +ENTRY(wakeup_start) + cli + cld + + LJMPW_RM(3f) +3: + /* Apparently some dimwit BIOS programmers don't know how to + program a PM to RM transition, and we might end up here with + junk in the data segment descriptor registers. The only way + to repair that is to go into PM and fix it ourselves... */ + movw $16, %cx + lgdtl %cs:wakeup_gdt + movl %cr0, %eax + orb $X86_CR0_PE, %al + movl %eax, %cr0 + ljmpw $8, $2f +2: + movw %cx, %ds + movw %cx, %es + movw %cx, %ss + movw %cx, %fs + movw %cx, %gs + + andb $~X86_CR0_PE, %al + movl %eax, %cr0 + LJMPW_RM(3f) +3: + /* Set up segments */ + movw %cs, %ax + movw %ax, %ss + movl $rm_stack_end, %esp + movw %ax, %ds + movw %ax, %es + movw %ax, %fs + movw %ax, %gs + + lidtl wakeup_idt + + /* Clear the EFLAGS */ + pushl $0 + popfl + + /* Check header signature... */ + movl signature, %eax + cmpl $WAKEUP_HEADER_SIGNATURE, %eax + jne bogus_real_magic + + /* Check we really have everything... */ + movl end_signature, %eax + cmpl $REALMODE_END_SIGNATURE, %eax + jne bogus_real_magic + + /* Call the C code */ + calll main + + /* Restore MISC_ENABLE before entering protected mode, in case + BIOS decided to clear XD_DISABLE during S3. */ + movl pmode_behavior, %edi + btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %edi + jnc 1f + + movl pmode_misc_en, %eax + movl pmode_misc_en + 4, %edx + movl $MSR_IA32_MISC_ENABLE, %ecx + wrmsr +1: + + /* Do any other stuff... */ + +#ifndef CONFIG_64BIT + /* This could also be done in C code... */ + movl pmode_cr3, %eax + movl %eax, %cr3 + + btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi + jnc 1f + movl pmode_cr4, %eax + movl %eax, %cr4 +1: + btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi + jnc 1f + movl pmode_efer, %eax + movl pmode_efer + 4, %edx + movl $MSR_EFER, %ecx + wrmsr +1: + + lgdtl pmode_gdt + + /* This really couldn't... */ + movl pmode_entry, %eax + movl pmode_cr0, %ecx + movl %ecx, %cr0 + ljmpl $__KERNEL_CS, $pa_startup_32 + /* -> jmp *%eax in trampoline_32.S */ +#else + jmp trampoline_start +#endif + +bogus_real_magic: +1: + hlt + jmp 1b + + .section ".rodata","a" + + /* + * Set up the wakeup GDT. We set these up as Big Real Mode, + * that is, with limits set to 4 GB. At least the Lenovo + * Thinkpad X61 is known to need this for the video BIOS + * initialization quirk to work; this is likely to also + * be the case for other laptops or integrated video devices. + */ + + .balign 16 +GLOBAL(wakeup_gdt) + .word 3*8-1 /* Self-descriptor */ + .long pa_wakeup_gdt + .word 0 + + .word 0xffff /* 16-bit code segment @ real_mode_base */ + .long 0x9b000000 + pa_real_mode_base + .word 0x008f /* big real mode */ + + .word 0xffff /* 16-bit data segment @ real_mode_base */ + .long 0x93000000 + pa_real_mode_base + .word 0x008f /* big real mode */ +END(wakeup_gdt) + + .section ".rodata","a" + .balign 8 + + /* This is the standard real-mode IDT */ + .balign 16 +GLOBAL(wakeup_idt) + .word 0xffff /* limit */ + .long 0 /* address */ + .word 0 +END(wakeup_idt) |