summaryrefslogtreecommitdiffstats
path: root/kernel/arch/x86/ia32/ia32entry.S
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/x86/ia32/ia32entry.S')
-rw-r--r--kernel/arch/x86/ia32/ia32entry.S611
1 files changed, 611 insertions, 0 deletions
diff --git a/kernel/arch/x86/ia32/ia32entry.S b/kernel/arch/x86/ia32/ia32entry.S
new file mode 100644
index 000000000..72bf2680f
--- /dev/null
+++ b/kernel/arch/x86/ia32/ia32entry.S
@@ -0,0 +1,611 @@
+/*
+ * Compatibility mode system call entry point for x86-64.
+ *
+ * Copyright 2000-2002 Andi Kleen, SuSE Labs.
+ */
+
+#include <asm/dwarf2.h>
+#include <asm/calling.h>
+#include <asm/asm-offsets.h>
+#include <asm/current.h>
+#include <asm/errno.h>
+#include <asm/ia32_unistd.h>
+#include <asm/thread_info.h>
+#include <asm/segment.h>
+#include <asm/irqflags.h>
+#include <asm/asm.h>
+#include <asm/smap.h>
+#include <linux/linkage.h>
+#include <linux/err.h>
+
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE 0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysexit_audit ia32_ret_from_sys_call
+#define sysretl_audit ia32_ret_from_sys_call
+#endif
+
+ .section .entry.text, "ax"
+
+ /* clobbers %rax */
+ .macro CLEAR_RREGS _r9=rax
+ xorl %eax,%eax
+ movq %rax,R11(%rsp)
+ movq %rax,R10(%rsp)
+ movq %\_r9,R9(%rsp)
+ movq %rax,R8(%rsp)
+ .endm
+
+ /*
+ * Reload arg registers from stack in case ptrace changed them.
+ * We don't reload %eax because syscall_trace_enter() returned
+ * the %rax value we should see. Instead, we just truncate that
+ * value to 32 bits again as we did on entry from user mode.
+ * If it's a new value set by user_regset during entry tracing,
+ * this matches the normal truncation of the user-mode value.
+ * If it's -1 to make us punt the syscall, then (u32)-1 is still
+ * an appropriately invalid value.
+ */
+ .macro LOAD_ARGS32 _r9=0
+ .if \_r9
+ movl R9(%rsp),%r9d
+ .endif
+ movl RCX(%rsp),%ecx
+ movl RDX(%rsp),%edx
+ movl RSI(%rsp),%esi
+ movl RDI(%rsp),%edi
+ movl %eax,%eax /* zero extension */
+ .endm
+
+ .macro CFI_STARTPROC32 simple
+ CFI_STARTPROC \simple
+ CFI_UNDEFINED r8
+ CFI_UNDEFINED r9
+ CFI_UNDEFINED r10
+ CFI_UNDEFINED r11
+ CFI_UNDEFINED r12
+ CFI_UNDEFINED r13
+ CFI_UNDEFINED r14
+ CFI_UNDEFINED r15
+ .endm
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_usergs_sysret32)
+ swapgs
+ sysretl
+ENDPROC(native_usergs_sysret32)
+
+ENTRY(native_irq_enable_sysexit)
+ swapgs
+ sti
+ sysexit
+ENDPROC(native_irq_enable_sysexit)
+#endif
+
+/*
+ * 32bit SYSENTER instruction entry.
+ *
+ * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
+ * IF and VM in rflags are cleared (IOW: interrupts are off).
+ * SYSENTER does not save anything on the stack,
+ * and does not save old rip (!!!) and rflags.
+ *
+ * Arguments:
+ * eax system call number
+ * ebx arg1
+ * ecx arg2
+ * edx arg3
+ * esi arg4
+ * edi arg5
+ * ebp user stack
+ * 0(%ebp) arg6
+ *
+ * This is purely a fast path. For anything complicated we use the int 0x80
+ * path below. We set up a complete hardware stack frame to share code
+ * with the int 0x80 path.
+ */
+ENTRY(ia32_sysenter_target)
+ CFI_STARTPROC32 simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA rsp,0
+ CFI_REGISTER rsp,rbp
+
+ /*
+ * Interrupts are off on entry.
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ SWAPGS_UNSAFE_STACK
+ movq PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp
+ ENABLE_INTERRUPTS(CLBR_NONE)
+
+ /* Zero-extending 32-bit regs, do not remove */
+ movl %ebp, %ebp
+ movl %eax, %eax
+
+ movl ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d
+ CFI_REGISTER rip,r10
+
+ /* Construct struct pt_regs on stack */
+ pushq_cfi $__USER32_DS /* pt_regs->ss */
+ pushq_cfi %rbp /* pt_regs->sp */
+ CFI_REL_OFFSET rsp,0
+ pushfq_cfi /* pt_regs->flags */
+ pushq_cfi $__USER32_CS /* pt_regs->cs */
+ pushq_cfi %r10 /* pt_regs->ip = thread_info->sysenter_return */
+ CFI_REL_OFFSET rip,0
+ pushq_cfi_reg rax /* pt_regs->orig_ax */
+ pushq_cfi_reg rdi /* pt_regs->di */
+ pushq_cfi_reg rsi /* pt_regs->si */
+ pushq_cfi_reg rdx /* pt_regs->dx */
+ pushq_cfi_reg rcx /* pt_regs->cx */
+ pushq_cfi_reg rax /* pt_regs->ax */
+ cld
+ sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
+ CFI_ADJUST_CFA_OFFSET 10*8
+
+ /*
+ * no need to do an access_ok check here because rbp has been
+ * 32bit zero extended
+ */
+ ASM_STAC
+1: movl (%rbp),%ebp
+ _ASM_EXTABLE(1b,ia32_badarg)
+ ASM_CLAC
+
+ /*
+ * Sysenter doesn't filter flags, so we need to clear NT
+ * ourselves. To save a few cycles, we can check whether
+ * NT was set instead of doing an unconditional popfq.
+ */
+ testl $X86_EFLAGS_NT,EFLAGS(%rsp)
+ jnz sysenter_fix_flags
+sysenter_flags_fixed:
+
+ orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ CFI_REMEMBER_STATE
+ jnz sysenter_tracesys
+ cmpq $(IA32_NR_syscalls-1),%rax
+ ja ia32_badsys
+sysenter_do_call:
+ /* 32bit syscall -> 64bit C ABI argument conversion */
+ movl %edi,%r8d /* arg5 */
+ movl %ebp,%r9d /* arg6 */
+ xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
+ movl %ebx,%edi /* arg1 */
+ movl %edx,%edx /* arg3 (zero extension) */
+sysenter_dispatch:
+ call *ia32_sys_call_table(,%rax,8)
+ movq %rax,RAX(%rsp)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz sysexit_audit
+sysexit_from_sys_call:
+ /*
+ * NB: SYSEXIT is not obviously safe for 64-bit kernels -- an
+ * NMI between STI and SYSEXIT has poorly specified behavior,
+ * and and NMI followed by an IRQ with usergs is fatal. So
+ * we just pretend we're using SYSEXIT but we really use
+ * SYSRETL instead.
+ *
+ * This code path is still called 'sysexit' because it pairs
+ * with 'sysenter' and it uses the SYSENTER calling convention.
+ */
+ andl $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ movl RIP(%rsp),%ecx /* User %eip */
+ CFI_REGISTER rip,rcx
+ RESTORE_RSI_RDI
+ xorl %edx,%edx /* avoid info leaks */
+ xorq %r8,%r8
+ xorq %r9,%r9
+ xorq %r10,%r10
+ movl EFLAGS(%rsp),%r11d /* User eflags */
+ /*CFI_RESTORE rflags*/
+ TRACE_IRQS_ON
+
+ /*
+ * SYSRETL works even on Intel CPUs. Use it in preference to SYSEXIT,
+ * since it avoids a dicey window with interrupts enabled.
+ */
+ movl RSP(%rsp),%esp
+
+ /*
+ * USERGS_SYSRET32 does:
+ * gsbase = user's gs base
+ * eip = ecx
+ * rflags = r11
+ * cs = __USER32_CS
+ * ss = __USER_DS
+ *
+ * The prologue set RIP(%rsp) to VDSO32_SYSENTER_RETURN, which does:
+ *
+ * pop %ebp
+ * pop %edx
+ * pop %ecx
+ *
+ * Therefore, we invoke SYSRETL with EDX and R8-R10 zeroed to
+ * avoid info leaks. R11 ends up with VDSO32_SYSENTER_RETURN's
+ * address (already known to user code), and R12-R15 are
+ * callee-saved and therefore don't contain any interesting
+ * kernel data.
+ */
+ USERGS_SYSRET32
+
+ CFI_RESTORE_STATE
+
+#ifdef CONFIG_AUDITSYSCALL
+ .macro auditsys_entry_common
+ movl %esi,%r8d /* 5th arg: 4th syscall arg */
+ movl %ecx,%r9d /*swap with edx*/
+ movl %edx,%ecx /* 4th arg: 3rd syscall arg */
+ movl %r9d,%edx /* 3rd arg: 2nd syscall arg */
+ movl %ebx,%esi /* 2nd arg: 1st syscall arg */
+ movl %eax,%edi /* 1st arg: syscall number */
+ call __audit_syscall_entry
+ movl RAX(%rsp),%eax /* reload syscall number */
+ cmpq $(IA32_NR_syscalls-1),%rax
+ ja ia32_badsys
+ movl %ebx,%edi /* reload 1st syscall arg */
+ movl RCX(%rsp),%esi /* reload 2nd syscall arg */
+ movl RDX(%rsp),%edx /* reload 3rd syscall arg */
+ movl RSI(%rsp),%ecx /* reload 4th syscall arg */
+ movl RDI(%rsp),%r8d /* reload 5th syscall arg */
+ .endm
+
+ .macro auditsys_exit exit
+ testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz ia32_ret_from_sys_call
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ movl %eax,%esi /* second arg, syscall return value */
+ cmpl $-MAX_ERRNO,%eax /* is it an error ? */
+ jbe 1f
+ movslq %eax, %rsi /* if error sign extend to 64 bits */
+1: setbe %al /* 1 if error, 0 if not */
+ movzbl %al,%edi /* zero-extend that into %edi */
+ call __audit_syscall_exit
+ movq RAX(%rsp),%rax /* reload syscall return value */
+ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jz \exit
+ CLEAR_RREGS
+ jmp int_with_check
+ .endm
+
+sysenter_auditsys:
+ auditsys_entry_common
+ movl %ebp,%r9d /* reload 6th syscall arg */
+ jmp sysenter_dispatch
+
+sysexit_audit:
+ auditsys_exit sysexit_from_sys_call
+#endif
+
+sysenter_fix_flags:
+ pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
+ popfq_cfi
+ jmp sysenter_flags_fixed
+
+sysenter_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jz sysenter_auditsys
+#endif
+ SAVE_EXTRA_REGS
+ CLEAR_RREGS
+ movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
+ movq %rsp,%rdi /* &pt_regs -> arg1 */
+ call syscall_trace_enter
+ LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
+ RESTORE_EXTRA_REGS
+ cmpq $(IA32_NR_syscalls-1),%rax
+ ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
+ jmp sysenter_do_call
+ CFI_ENDPROC
+ENDPROC(ia32_sysenter_target)
+
+/*
+ * 32bit SYSCALL instruction entry.
+ *
+ * 32bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
+ * then loads new ss, cs, and rip from previously programmed MSRs.
+ * rflags gets masked by a value from another MSR (so CLD and CLAC
+ * are not needed). SYSCALL does not save anything on the stack
+ * and does not change rsp.
+ *
+ * Note: rflags saving+masking-with-MSR happens only in Long mode
+ * (in legacy 32bit mode, IF, RF and VM bits are cleared and that's it).
+ * Don't get confused: rflags saving+masking depends on Long Mode Active bit
+ * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
+ * or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
+ *
+ * Arguments:
+ * eax system call number
+ * ecx return address
+ * ebx arg1
+ * ebp arg2 (note: not saved in the stack frame, should not be touched)
+ * edx arg3
+ * esi arg4
+ * edi arg5
+ * esp user stack
+ * 0(%esp) arg6
+ *
+ * This is purely a fast path. For anything complicated we use the int 0x80
+ * path below. We set up a complete hardware stack frame to share code
+ * with the int 0x80 path.
+ */
+ENTRY(ia32_cstar_target)
+ CFI_STARTPROC32 simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA rsp,0
+ CFI_REGISTER rip,rcx
+ /*CFI_REGISTER rflags,r11*/
+
+ /*
+ * Interrupts are off on entry.
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ SWAPGS_UNSAFE_STACK
+ movl %esp,%r8d
+ CFI_REGISTER rsp,r8
+ movq PER_CPU_VAR(kernel_stack),%rsp
+ ENABLE_INTERRUPTS(CLBR_NONE)
+
+ /* Zero-extending 32-bit regs, do not remove */
+ movl %eax,%eax
+
+ /* Construct struct pt_regs on stack */
+ pushq_cfi $__USER32_DS /* pt_regs->ss */
+ pushq_cfi %r8 /* pt_regs->sp */
+ CFI_REL_OFFSET rsp,0
+ pushq_cfi %r11 /* pt_regs->flags */
+ pushq_cfi $__USER32_CS /* pt_regs->cs */
+ pushq_cfi %rcx /* pt_regs->ip */
+ CFI_REL_OFFSET rip,0
+ pushq_cfi_reg rax /* pt_regs->orig_ax */
+ pushq_cfi_reg rdi /* pt_regs->di */
+ pushq_cfi_reg rsi /* pt_regs->si */
+ pushq_cfi_reg rdx /* pt_regs->dx */
+ pushq_cfi_reg rbp /* pt_regs->cx */
+ movl %ebp,%ecx
+ pushq_cfi_reg rax /* pt_regs->ax */
+ sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
+ CFI_ADJUST_CFA_OFFSET 10*8
+
+ /*
+ * no need to do an access_ok check here because r8 has been
+ * 32bit zero extended
+ */
+ ASM_STAC
+1: movl (%r8),%r9d
+ _ASM_EXTABLE(1b,ia32_badarg)
+ ASM_CLAC
+ orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ CFI_REMEMBER_STATE
+ jnz cstar_tracesys
+ cmpq $IA32_NR_syscalls-1,%rax
+ ja ia32_badsys
+cstar_do_call:
+ /* 32bit syscall -> 64bit C ABI argument conversion */
+ movl %edi,%r8d /* arg5 */
+ /* r9 already loaded */ /* arg6 */
+ xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
+ movl %ebx,%edi /* arg1 */
+ movl %edx,%edx /* arg3 (zero extension) */
+cstar_dispatch:
+ call *ia32_sys_call_table(,%rax,8)
+ movq %rax,RAX(%rsp)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz sysretl_audit
+sysretl_from_sys_call:
+ andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ RESTORE_RSI_RDI_RDX
+ movl RIP(%rsp),%ecx
+ CFI_REGISTER rip,rcx
+ movl EFLAGS(%rsp),%r11d
+ /*CFI_REGISTER rflags,r11*/
+ xorq %r10,%r10
+ xorq %r9,%r9
+ xorq %r8,%r8
+ TRACE_IRQS_ON
+ movl RSP(%rsp),%esp
+ CFI_RESTORE rsp
+ /*
+ * 64bit->32bit SYSRET restores eip from ecx,
+ * eflags from r11 (but RF and VM bits are forced to 0),
+ * cs and ss are loaded from MSRs.
+ * (Note: 32bit->32bit SYSRET is different: since r11
+ * does not exist, it merely sets eflags.IF=1).
+ *
+ * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
+ * descriptor is not reinitialized. This means that we must
+ * avoid SYSRET with SS == NULL, which could happen if we schedule,
+ * exit the kernel, and re-enter using an interrupt vector. (All
+ * interrupt entries on x86_64 set SS to NULL.) We prevent that
+ * from happening by reloading SS in __switch_to.
+ */
+ USERGS_SYSRET32
+
+#ifdef CONFIG_AUDITSYSCALL
+cstar_auditsys:
+ CFI_RESTORE_STATE
+ movl %r9d,R9(%rsp) /* register to be clobbered by call */
+ auditsys_entry_common
+ movl R9(%rsp),%r9d /* reload 6th syscall arg */
+ jmp cstar_dispatch
+
+sysretl_audit:
+ auditsys_exit sysretl_from_sys_call
+#endif
+
+cstar_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jz cstar_auditsys
+#endif
+ xchgl %r9d,%ebp
+ SAVE_EXTRA_REGS
+ CLEAR_RREGS r9
+ movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
+ movq %rsp,%rdi /* &pt_regs -> arg1 */
+ call syscall_trace_enter
+ LOAD_ARGS32 1 /* reload args from stack in case ptrace changed it */
+ RESTORE_EXTRA_REGS
+ xchgl %ebp,%r9d
+ cmpq $(IA32_NR_syscalls-1),%rax
+ ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
+ jmp cstar_do_call
+END(ia32_cstar_target)
+
+ia32_badarg:
+ ASM_CLAC
+ movq $-EFAULT,%rax
+ jmp ia32_sysret
+ CFI_ENDPROC
+
+/*
+ * Emulated IA32 system calls via int 0x80.
+ *
+ * Arguments:
+ * eax system call number
+ * ebx arg1
+ * ecx arg2
+ * edx arg3
+ * esi arg4
+ * edi arg5
+ * ebp arg6 (note: not saved in the stack frame, should not be touched)
+ *
+ * Notes:
+ * Uses the same stack frame as the x86-64 version.
+ * All registers except eax must be saved (but ptrace may violate that).
+ * Arguments are zero extended. For system calls that want sign extension and
+ * take long arguments a wrapper is needed. Most calls can just be called
+ * directly.
+ * Assumes it is only called from user space and entered with interrupts off.
+ */
+
+ENTRY(ia32_syscall)
+ CFI_STARTPROC32 simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA rsp,5*8
+ /*CFI_REL_OFFSET ss,4*8 */
+ CFI_REL_OFFSET rsp,3*8
+ /*CFI_REL_OFFSET rflags,2*8 */
+ /*CFI_REL_OFFSET cs,1*8 */
+ CFI_REL_OFFSET rip,0*8
+
+ /*
+ * Interrupts are off on entry.
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+ SWAPGS
+ ENABLE_INTERRUPTS(CLBR_NONE)
+
+ /* Zero-extending 32-bit regs, do not remove */
+ movl %eax,%eax
+
+ /* Construct struct pt_regs on stack (iret frame is already on stack) */
+ pushq_cfi_reg rax /* pt_regs->orig_ax */
+ pushq_cfi_reg rdi /* pt_regs->di */
+ pushq_cfi_reg rsi /* pt_regs->si */
+ pushq_cfi_reg rdx /* pt_regs->dx */
+ pushq_cfi_reg rcx /* pt_regs->cx */
+ pushq_cfi_reg rax /* pt_regs->ax */
+ cld
+ sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
+ CFI_ADJUST_CFA_OFFSET 10*8
+
+ orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz ia32_tracesys
+ cmpq $(IA32_NR_syscalls-1),%rax
+ ja ia32_badsys
+ia32_do_call:
+ /* 32bit syscall -> 64bit C ABI argument conversion */
+ movl %edi,%r8d /* arg5 */
+ movl %ebp,%r9d /* arg6 */
+ xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
+ movl %ebx,%edi /* arg1 */
+ movl %edx,%edx /* arg3 (zero extension) */
+ call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
+ia32_sysret:
+ movq %rax,RAX(%rsp)
+ia32_ret_from_sys_call:
+ CLEAR_RREGS
+ jmp int_ret_from_sys_call
+
+ia32_tracesys:
+ SAVE_EXTRA_REGS
+ CLEAR_RREGS
+ movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
+ movq %rsp,%rdi /* &pt_regs -> arg1 */
+ call syscall_trace_enter
+ LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
+ RESTORE_EXTRA_REGS
+ cmpq $(IA32_NR_syscalls-1),%rax
+ ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */
+ jmp ia32_do_call
+END(ia32_syscall)
+
+ia32_badsys:
+ movq $0,ORIG_RAX(%rsp)
+ movq $-ENOSYS,%rax
+ jmp ia32_sysret
+
+ CFI_ENDPROC
+
+ .macro PTREGSCALL label, func
+ ALIGN
+GLOBAL(\label)
+ leaq \func(%rip),%rax
+ jmp ia32_ptregs_common
+ .endm
+
+ CFI_STARTPROC32
+
+ PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn
+ PTREGSCALL stub32_sigreturn, sys32_sigreturn
+ PTREGSCALL stub32_fork, sys_fork
+ PTREGSCALL stub32_vfork, sys_vfork
+
+ ALIGN
+GLOBAL(stub32_clone)
+ leaq sys_clone(%rip),%rax
+ mov %r8, %rcx
+ jmp ia32_ptregs_common
+
+ ALIGN
+ia32_ptregs_common:
+ CFI_ENDPROC
+ CFI_STARTPROC32 simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA rsp,SIZEOF_PTREGS
+ CFI_REL_OFFSET rax,RAX
+ CFI_REL_OFFSET rcx,RCX
+ CFI_REL_OFFSET rdx,RDX
+ CFI_REL_OFFSET rsi,RSI
+ CFI_REL_OFFSET rdi,RDI
+ CFI_REL_OFFSET rip,RIP
+/* CFI_REL_OFFSET cs,CS*/
+/* CFI_REL_OFFSET rflags,EFLAGS*/
+ CFI_REL_OFFSET rsp,RSP
+/* CFI_REL_OFFSET ss,SS*/
+ SAVE_EXTRA_REGS 8
+ call *%rax
+ RESTORE_EXTRA_REGS 8
+ ret
+ CFI_ENDPROC
+END(ia32_ptregs_common)