diff options
Diffstat (limited to 'kernel/arch/sh/kernel/cpu/shmobile/sleep.S')
| -rw-r--r-- | kernel/arch/sh/kernel/cpu/shmobile/sleep.S | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/kernel/arch/sh/kernel/cpu/shmobile/sleep.S b/kernel/arch/sh/kernel/cpu/shmobile/sleep.S new file mode 100644 index 000000000..e6aac65f5 --- /dev/null +++ b/kernel/arch/sh/kernel/cpu/shmobile/sleep.S @@ -0,0 +1,405 @@ +/* + * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S + * + * Sleep mode and Standby modes support for SuperH Mobile + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sys.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/suspend.h> + +/* + * Kernel mode register usage, see entry.S: + * k0 scratch + * k1 scratch + */ +#define k0 r0 +#define k1 r1 + +/* manage self-refresh and enter standby mode. must be self-contained. + * this code will be copied to on-chip memory and executed from there. + */ + .balign 4 +ENTRY(sh_mobile_sleep_enter_start) + + /* save mode flags */ + mov.l r4, @(SH_SLEEP_MODE, r5) + + /* save original vbr */ + stc vbr, r0 + mov.l r0, @(SH_SLEEP_VBR, r5) + + /* point vbr to our on-chip memory page */ + ldc r5, vbr + + /* save return address */ + sts pr, r0 + mov.l r0, @(SH_SLEEP_SPC, r5) + + /* save sr */ + stc sr, r0 + mov.l r0, @(SH_SLEEP_SR, r5) + + /* save general purpose registers to stack if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_REGS, r0 + bt skip_regs_save + + sts.l pr, @-r15 + mov.l r14, @-r15 + mov.l r13, @-r15 + mov.l r12, @-r15 + mov.l r11, @-r15 + mov.l r10, @-r15 + mov.l r9, @-r15 + mov.l r8, @-r15 + + /* make sure bank0 is selected, save low registers */ + mov.l rb_bit, r9 + not r9, r9 + bsr set_sr + mov #0, r10 + + bsr save_low_regs + nop + + /* switch to bank 1, save low registers */ + mov.l rb_bit, r10 + bsr set_sr + mov #-1, r9 + + bsr save_low_regs + nop + + /* switch back to bank 0 */ + mov.l rb_bit, r9 + not r9, r9 + bsr set_sr + mov #0, r10 + +skip_regs_save: + + /* save sp, also set to internal ram */ + mov.l r15, @(SH_SLEEP_SP, r5) + mov r5, r15 + + /* save stbcr */ + bsr save_register + mov #SH_SLEEP_REG_STBCR, r0 + + /* save mmu and cache context if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_MMU, r0 + bt skip_mmu_save_disable + + /* save mmu state */ + bsr save_register + mov #SH_SLEEP_REG_PTEH, r0 + + bsr save_register + mov #SH_SLEEP_REG_PTEL, r0 + + bsr save_register + mov #SH_SLEEP_REG_TTB, r0 + + bsr save_register + mov #SH_SLEEP_REG_TEA, r0 + + bsr save_register + mov #SH_SLEEP_REG_MMUCR, r0 + + bsr save_register + mov #SH_SLEEP_REG_PTEA, r0 + + bsr save_register + mov #SH_SLEEP_REG_PASCR, r0 + + bsr save_register + mov #SH_SLEEP_REG_IRMCR, r0 + + /* invalidate TLBs and disable the MMU */ + bsr get_register + mov #SH_SLEEP_REG_MMUCR, r0 + mov #4, r1 + mov.l r1, @r0 + icbi @r0 + + /* save cache registers and disable caches */ + bsr save_register + mov #SH_SLEEP_REG_CCR, r0 + + bsr save_register + mov #SH_SLEEP_REG_RAMCR, r0 + + bsr get_register + mov #SH_SLEEP_REG_CCR, r0 + mov #0, r1 + mov.l r1, @r0 + icbi @r0 + +skip_mmu_save_disable: + /* call self-refresh entering code if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_SF, r0 + bt skip_set_sf + + mov.l @(SH_SLEEP_SF_PRE, r5), r0 + jsr @r0 + nop + +skip_set_sf: + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_STANDBY, r0 + bt test_rstandby + + /* set mode to "software standby mode" */ + bra do_sleep + mov #0x80, r1 + +test_rstandby: + tst #SUSP_SH_RSTANDBY, r0 + bt test_ustandby + + /* setup BAR register */ + bsr get_register + mov #SH_SLEEP_REG_BAR, r0 + mov.l @(SH_SLEEP_RESUME, r5), r1 + mov.l r1, @r0 + + /* set mode to "r-standby mode" */ + bra do_sleep + mov #0x20, r1 + +test_ustandby: + tst #SUSP_SH_USTANDBY, r0 + bt force_sleep + + /* set mode to "u-standby mode" */ + bra do_sleep + mov #0x10, r1 + +force_sleep: + + /* set mode to "sleep mode" */ + mov #0x00, r1 + +do_sleep: + /* setup and enter selected standby mode */ + bsr get_register + mov #SH_SLEEP_REG_STBCR, r0 + mov.l r1, @r0 +again: + sleep + bra again + nop + +save_register: + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r1 + add #-SH_SLEEP_BASE_ADDR, r0 + mov.l @r1, r1 + add #SH_SLEEP_BASE_DATA, r0 + mov.l r1, @(r0, r5) + add #-SH_SLEEP_BASE_DATA, r0 + rts + nop + +get_register: + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r0 + rts + nop + +set_sr: + stc sr, r8 + and r9, r8 + or r10, r8 + ldc r8, sr + rts + nop + +save_low_regs: + mov.l r7, @-r15 + mov.l r6, @-r15 + mov.l r5, @-r15 + mov.l r4, @-r15 + mov.l r3, @-r15 + mov.l r2, @-r15 + mov.l r1, @-r15 + rts + mov.l r0, @-r15 + + .balign 4 +rb_bit: .long 0x20000000 ! RB=1 + +ENTRY(sh_mobile_sleep_enter_end) + + .balign 4 +ENTRY(sh_mobile_sleep_resume_start) + + /* figure out start address */ + bsr 0f + nop +0: + sts pr, k1 + mov.l 1f, k0 + and k0, k1 + + /* store pointer to data area in VBR */ + ldc k1, vbr + + /* setup sr with saved sr */ + mov.l @(SH_SLEEP_SR, k1), k0 + ldc k0, sr + + /* now: user register set! */ + stc vbr, r5 + + /* setup spc with return address to c code */ + mov.l @(SH_SLEEP_SPC, r5), r0 + ldc r0, spc + + /* restore vbr */ + mov.l @(SH_SLEEP_VBR, r5), r0 + ldc r0, vbr + + /* setup ssr with saved sr */ + mov.l @(SH_SLEEP_SR, r5), r0 + ldc r0, ssr + + /* restore sp */ + mov.l @(SH_SLEEP_SP, r5), r15 + + /* restore sleep mode register */ + bsr restore_register + mov #SH_SLEEP_REG_STBCR, r0 + + /* call self-refresh resume code if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_SF, r0 + bt skip_restore_sf + + mov.l @(SH_SLEEP_SF_POST, r5), r0 + jsr @r0 + nop + +skip_restore_sf: + /* restore mmu and cache state if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_MMU, r0 + bt skip_restore_mmu + + /* restore mmu state */ + bsr restore_register + mov #SH_SLEEP_REG_PTEH, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PTEL, r0 + + bsr restore_register + mov #SH_SLEEP_REG_TTB, r0 + + bsr restore_register + mov #SH_SLEEP_REG_TEA, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PTEA, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PASCR, r0 + + bsr restore_register + mov #SH_SLEEP_REG_IRMCR, r0 + + bsr restore_register + mov #SH_SLEEP_REG_MMUCR, r0 + icbi @r0 + + /* restore cache settings */ + bsr restore_register + mov #SH_SLEEP_REG_RAMCR, r0 + icbi @r0 + + bsr restore_register + mov #SH_SLEEP_REG_CCR, r0 + icbi @r0 + +skip_restore_mmu: + + /* restore general purpose registers if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_REGS, r0 + bt skip_restore_regs + + /* switch to bank 1, restore low registers */ + mov.l _rb_bit, r10 + bsr _set_sr + mov #-1, r9 + + bsr restore_low_regs + nop + + /* switch to bank0, restore low registers */ + mov.l _rb_bit, r9 + not r9, r9 + bsr _set_sr + mov #0, r10 + + bsr restore_low_regs + nop + + /* restore the rest of the registers */ + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + lds.l @r15+, pr + +skip_restore_regs: + rte + nop + +restore_register: + add #SH_SLEEP_BASE_DATA, r0 + mov.l @(r0, r5), r1 + add #-SH_SLEEP_BASE_DATA, r0 + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r0 + mov.l r1, @r0 + rts + nop + +_set_sr: + stc sr, r8 + and r9, r8 + or r10, r8 + ldc r8, sr + rts + nop + +restore_low_regs: + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + rts + mov.l @r15+, r7 + + .balign 4 +_rb_bit: .long 0x20000000 ! RB=1 +1: .long ~0x7ff +ENTRY(sh_mobile_sleep_resume_end) |