summaryrefslogtreecommitdiffstats
path: root/kernel/arch/sh/drivers/pci/pci-sh7751.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/sh/drivers/pci/pci-sh7751.c')
-rw-r--r--kernel/arch/sh/drivers/pci/pci-sh7751.c182
1 files changed, 182 insertions, 0 deletions
diff --git a/kernel/arch/sh/drivers/pci/pci-sh7751.c b/kernel/arch/sh/drivers/pci/pci-sh7751.c
new file mode 100644
index 000000000..86adb1e23
--- /dev/null
+++ b/kernel/arch/sh/drivers/pci/pci-sh7751.c
@@ -0,0 +1,182 @@
+/*
+ * Low-Level PCI Support for the SH7751
+ *
+ * Copyright (C) 2003 - 2009 Paul Mundt
+ * Copyright (C) 2001 Dustin McIntire
+ *
+ * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include "pci-sh4.h"
+#include <asm/addrspace.h>
+#include <asm/sizes.h>
+
+static int __init __area_sdram_check(struct pci_channel *chan,
+ unsigned int area)
+{
+ unsigned long word;
+
+ word = __raw_readl(SH7751_BCR1);
+ /* check BCR for SDRAM in area */
+ if (((word >> area) & 1) == 0) {
+ printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
+ area, word);
+ return 0;
+ }
+ pci_write_reg(chan, word, SH4_PCIBCR1);
+
+ word = __raw_readw(SH7751_BCR2);
+ /* check BCR2 for 32bit SDRAM interface*/
+ if (((word >> (area << 1)) & 0x3) != 0x3) {
+ printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
+ area, word);
+ return 0;
+ }
+ pci_write_reg(chan, word, SH4_PCIBCR2);
+
+ return 1;
+}
+
+static struct resource sh7751_pci_resources[] = {
+ {
+ .name = "SH7751_IO",
+ .start = 0x1000,
+ .end = SZ_4M - 1,
+ .flags = IORESOURCE_IO
+ }, {
+ .name = "SH7751_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+ },
+};
+
+static struct pci_channel sh7751_pci_controller = {
+ .pci_ops = &sh4_pci_ops,
+ .resources = sh7751_pci_resources,
+ .nr_resources = ARRAY_SIZE(sh7751_pci_resources),
+ .mem_offset = 0x00000000,
+ .io_offset = 0x00000000,
+ .io_map_base = SH7751_PCI_IO_BASE,
+};
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+ .window0 = {
+ .base = SH7751_CS3_BASE_ADDR,
+ .size = 0x04000000,
+ },
+};
+
+static int __init sh7751_pci_init(void)
+{
+ struct pci_channel *chan = &sh7751_pci_controller;
+ unsigned int id;
+ u32 word, reg;
+
+ printk(KERN_NOTICE "PCI: Starting initialization.\n");
+
+ chan->reg_base = 0xfe200000;
+
+ /* check for SH7751/SH7751R hardware */
+ id = pci_read_reg(chan, SH7751_PCICONF0);
+ if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
+ id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
+ pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
+ return -ENODEV;
+ }
+
+ /* Set the BCR's to enable PCI access */
+ reg = __raw_readl(SH7751_BCR1);
+ reg |= 0x80000;
+ __raw_writel(reg, SH7751_BCR1);
+
+ /* Turn the clocks back on (not done in reset)*/
+ pci_write_reg(chan, 0, SH4_PCICLKR);
+ /* Clear Powerdown IRQ's (not done in reset) */
+ word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
+ pci_write_reg(chan, word, SH4_PCIPINT);
+
+ /* set the command/status bits to:
+ * Wait Cycle Control + Parity Enable + Bus Master +
+ * Mem space enable
+ */
+ word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
+ SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
+ pci_write_reg(chan, word, SH7751_PCICONF1);
+
+ /* define this host as the host bridge */
+ word = PCI_BASE_CLASS_BRIDGE << 24;
+ pci_write_reg(chan, word, SH7751_PCICONF2);
+
+ /* Set IO and Mem windows to local address
+ * Make PCI and local address the same for easy 1 to 1 mapping
+ */
+ word = sh7751_pci_map.window0.size - 1;
+ pci_write_reg(chan, word, SH4_PCILSR0);
+ /* Set the values on window 0 PCI config registers */
+ word = P2SEGADDR(sh7751_pci_map.window0.base);
+ pci_write_reg(chan, word, SH4_PCILAR0);
+ pci_write_reg(chan, word, SH7751_PCICONF5);
+
+ /* Set the local 16MB PCI memory space window to
+ * the lowest PCI mapped address
+ */
+ word = chan->resources[1].start & SH4_PCIMBR_MASK;
+ pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
+ pci_write_reg(chan, word , SH4_PCIMBR);
+
+ /* Make sure the MSB's of IO window are set to access PCI space
+ * correctly */
+ word = chan->resources[0].start & SH4_PCIIOBR_MASK;
+ pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
+ pci_write_reg(chan, word, SH4_PCIIOBR);
+
+ /* Set PCI WCRx, BCRx's, copy from BSC locations */
+
+ /* check BCR for SDRAM in specified area */
+ switch (sh7751_pci_map.window0.base) {
+ case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
+ case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
+ case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
+ case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
+ case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
+ case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
+ case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
+ }
+
+ if (!word)
+ return -1;
+
+ /* configure the wait control registers */
+ word = __raw_readl(SH7751_WCR1);
+ pci_write_reg(chan, word, SH4_PCIWCR1);
+ word = __raw_readl(SH7751_WCR2);
+ pci_write_reg(chan, word, SH4_PCIWCR2);
+ word = __raw_readl(SH7751_WCR3);
+ pci_write_reg(chan, word, SH4_PCIWCR3);
+ word = __raw_readl(SH7751_MCR);
+ pci_write_reg(chan, word, SH4_PCIMCR);
+
+ /* NOTE: I'm ignoring the PCI error IRQs for now..
+ * TODO: add support for the internal error interrupts and
+ * DMA interrupts...
+ */
+
+ pci_fixup_pcic(chan);
+
+ /* SH7751 init done, set central function init complete */
+ /* use round robin mode to stop a device starving/overruning */
+ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
+ pci_write_reg(chan, word, SH4_PCICR);
+
+ return register_pci_controller(chan);
+}
+arch_initcall(sh7751_pci_init);