diff options
Diffstat (limited to 'kernel/arch/powerpc/platforms/pasemi')
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/Kconfig | 40 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/Makefile | 2 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/dma_lib.c | 633 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/gpio_mdio.c | 342 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/idle.c | 102 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/iommu.c | 269 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/misc.c | 94 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/pasemi.h | 35 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/pci.c | 246 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/powersave.S | 89 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/setup.c | 448 | ||||
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/time.c | 28 |
12 files changed, 2328 insertions, 0 deletions
diff --git a/kernel/arch/powerpc/platforms/pasemi/Kconfig b/kernel/arch/powerpc/platforms/pasemi/Kconfig new file mode 100644 index 000000000..a2aeb327d --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/Kconfig @@ -0,0 +1,40 @@ +config PPC_PASEMI + depends on PPC64 && PPC_BOOK3S + bool "PA Semi SoC-based platforms" + default n + select MPIC + select PCI + select PPC_UDBG_16550 + select PPC_NATIVE + select MPIC_BROKEN_REGREAD + help + This option enables support for PA Semi's PWRficient line + of SoC processors, including PA6T-1682M + +menu "PA Semi PWRficient options" + depends on PPC_PASEMI + +config PPC_PASEMI_IOMMU + bool "PA Semi IOMMU support" + depends on PPC_PASEMI + help + IOMMU support for PA Semi PWRficient + +config PPC_PASEMI_IOMMU_DMA_FORCE + bool "Force DMA engine to use IOMMU" + depends on PPC_PASEMI_IOMMU + help + This option forces the use of the IOMMU also for the + DMA engine. Otherwise the kernel will use it only when + running under a hypervisor. + + If in doubt, say "N". + +config PPC_PASEMI_MDIO + depends on PHYLIB + tristate "MDIO support via GPIO" + default y + help + Driver for MDIO via GPIO on PWRficient platforms + +endmenu diff --git a/kernel/arch/powerpc/platforms/pasemi/Makefile b/kernel/arch/powerpc/platforms/pasemi/Makefile new file mode 100644 index 000000000..8e8d4cae5 --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/Makefile @@ -0,0 +1,2 @@ +obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o +obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o diff --git a/kernel/arch/powerpc/platforms/pasemi/dma_lib.c b/kernel/arch/powerpc/platforms/pasemi/dma_lib.c new file mode 100644 index 000000000..aafa01ba0 --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/dma_lib.c @@ -0,0 +1,633 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Common functions for DMA access on PA Semi PWRficient + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/sched.h> + +#include <asm/pasemi_dma.h> + +#define MAX_TXCH 64 +#define MAX_RXCH 64 +#define MAX_FLAGS 64 +#define MAX_FUN 8 + +static struct pasdma_status *dma_status; + +static void __iomem *iob_regs; +static void __iomem *mac_regs[6]; +static void __iomem *dma_regs; + +static int base_hw_irq; + +static int num_txch, num_rxch; + +static struct pci_dev *dma_pdev; + +/* Bitmaps to handle allocation of channels */ + +static DECLARE_BITMAP(txch_free, MAX_TXCH); +static DECLARE_BITMAP(rxch_free, MAX_RXCH); +static DECLARE_BITMAP(flags_free, MAX_FLAGS); +static DECLARE_BITMAP(fun_free, MAX_FUN); + +/* pasemi_read_iob_reg - read IOB register + * @reg: Register to read (offset into PCI CFG space) + */ +unsigned int pasemi_read_iob_reg(unsigned int reg) +{ + return in_le32(iob_regs+reg); +} +EXPORT_SYMBOL(pasemi_read_iob_reg); + +/* pasemi_write_iob_reg - write IOB register + * @reg: Register to write to (offset into PCI CFG space) + * @val: Value to write + */ +void pasemi_write_iob_reg(unsigned int reg, unsigned int val) +{ + out_le32(iob_regs+reg, val); +} +EXPORT_SYMBOL(pasemi_write_iob_reg); + +/* pasemi_read_mac_reg - read MAC register + * @intf: MAC interface + * @reg: Register to read (offset into PCI CFG space) + */ +unsigned int pasemi_read_mac_reg(int intf, unsigned int reg) +{ + return in_le32(mac_regs[intf]+reg); +} +EXPORT_SYMBOL(pasemi_read_mac_reg); + +/* pasemi_write_mac_reg - write MAC register + * @intf: MAC interface + * @reg: Register to write to (offset into PCI CFG space) + * @val: Value to write + */ +void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val) +{ + out_le32(mac_regs[intf]+reg, val); +} +EXPORT_SYMBOL(pasemi_write_mac_reg); + +/* pasemi_read_dma_reg - read DMA register + * @reg: Register to read (offset into PCI CFG space) + */ +unsigned int pasemi_read_dma_reg(unsigned int reg) +{ + return in_le32(dma_regs+reg); +} +EXPORT_SYMBOL(pasemi_read_dma_reg); + +/* pasemi_write_dma_reg - write DMA register + * @reg: Register to write to (offset into PCI CFG space) + * @val: Value to write + */ +void pasemi_write_dma_reg(unsigned int reg, unsigned int val) +{ + out_le32(dma_regs+reg, val); +} +EXPORT_SYMBOL(pasemi_write_dma_reg); + +static int pasemi_alloc_tx_chan(enum pasemi_dmachan_type type) +{ + int bit; + int start, limit; + + switch (type & (TXCHAN_EVT0|TXCHAN_EVT1)) { + case TXCHAN_EVT0: + start = 0; + limit = 10; + break; + case TXCHAN_EVT1: + start = 10; + limit = MAX_TXCH; + break; + default: + start = 0; + limit = MAX_TXCH; + break; + } +retry: + bit = find_next_bit(txch_free, MAX_TXCH, start); + if (bit >= limit) + return -ENOSPC; + if (!test_and_clear_bit(bit, txch_free)) + goto retry; + + return bit; +} + +static void pasemi_free_tx_chan(int chan) +{ + BUG_ON(test_bit(chan, txch_free)); + set_bit(chan, txch_free); +} + +static int pasemi_alloc_rx_chan(void) +{ + int bit; +retry: + bit = find_first_bit(rxch_free, MAX_RXCH); + if (bit >= MAX_TXCH) + return -ENOSPC; + if (!test_and_clear_bit(bit, rxch_free)) + goto retry; + + return bit; +} + +static void pasemi_free_rx_chan(int chan) +{ + BUG_ON(test_bit(chan, rxch_free)); + set_bit(chan, rxch_free); +} + +/* pasemi_dma_alloc_chan - Allocate a DMA channel + * @type: Type of channel to allocate + * @total_size: Total size of structure to allocate (to allow for more + * room behind the structure to be used by the client) + * @offset: Offset in bytes from start of the total structure to the beginning + * of struct pasemi_dmachan. Needed when struct pasemi_dmachan is + * not the first member of the client structure. + * + * pasemi_dma_alloc_chan allocates a DMA channel for use by a client. The + * type argument specifies whether it's a RX or TX channel, and in the case + * of TX channels which group it needs to belong to (if any). + * + * Returns a pointer to the total structure allocated on success, NULL + * on failure. + */ +void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type, + int total_size, int offset) +{ + void *buf; + struct pasemi_dmachan *chan; + int chno; + + BUG_ON(total_size < sizeof(struct pasemi_dmachan)); + + buf = kzalloc(total_size, GFP_KERNEL); + + if (!buf) + return NULL; + chan = buf + offset; + + chan->priv = buf; + + switch (type & (TXCHAN|RXCHAN)) { + case RXCHAN: + chno = pasemi_alloc_rx_chan(); + chan->chno = chno; + chan->irq = irq_create_mapping(NULL, + base_hw_irq + num_txch + chno); + chan->status = &dma_status->rx_sta[chno]; + break; + case TXCHAN: + chno = pasemi_alloc_tx_chan(type); + chan->chno = chno; + chan->irq = irq_create_mapping(NULL, base_hw_irq + chno); + chan->status = &dma_status->tx_sta[chno]; + break; + } + + chan->chan_type = type; + + return chan; +} +EXPORT_SYMBOL(pasemi_dma_alloc_chan); + +/* pasemi_dma_free_chan - Free a previously allocated channel + * @chan: Channel to free + * + * Frees a previously allocated channel. It will also deallocate any + * descriptor ring associated with the channel, if allocated. + */ +void pasemi_dma_free_chan(struct pasemi_dmachan *chan) +{ + if (chan->ring_virt) + pasemi_dma_free_ring(chan); + + switch (chan->chan_type & (RXCHAN|TXCHAN)) { + case RXCHAN: + pasemi_free_rx_chan(chan->chno); + break; + case TXCHAN: + pasemi_free_tx_chan(chan->chno); + break; + } + + kfree(chan->priv); +} +EXPORT_SYMBOL(pasemi_dma_free_chan); + +/* pasemi_dma_alloc_ring - Allocate descriptor ring for a channel + * @chan: Channel for which to allocate + * @ring_size: Ring size in 64-bit (8-byte) words + * + * Allocate a descriptor ring for a channel. Returns 0 on success, errno + * on failure. The passed in struct pasemi_dmachan is updated with the + * virtual and DMA addresses of the ring. + */ +int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size) +{ + BUG_ON(chan->ring_virt); + + chan->ring_size = ring_size; + + chan->ring_virt = dma_alloc_coherent(&dma_pdev->dev, + ring_size * sizeof(u64), + &chan->ring_dma, GFP_KERNEL); + + if (!chan->ring_virt) + return -ENOMEM; + + memset(chan->ring_virt, 0, ring_size * sizeof(u64)); + + return 0; +} +EXPORT_SYMBOL(pasemi_dma_alloc_ring); + +/* pasemi_dma_free_ring - Free an allocated descriptor ring for a channel + * @chan: Channel for which to free the descriptor ring + * + * Frees a previously allocated descriptor ring for a channel. + */ +void pasemi_dma_free_ring(struct pasemi_dmachan *chan) +{ + BUG_ON(!chan->ring_virt); + + dma_free_coherent(&dma_pdev->dev, chan->ring_size * sizeof(u64), + chan->ring_virt, chan->ring_dma); + chan->ring_virt = NULL; + chan->ring_size = 0; + chan->ring_dma = 0; +} +EXPORT_SYMBOL(pasemi_dma_free_ring); + +/* pasemi_dma_start_chan - Start a DMA channel + * @chan: Channel to start + * @cmdsta: Additional CCMDSTA/TCMDSTA bits to write + * + * Enables (starts) a DMA channel with optional additional arguments. + */ +void pasemi_dma_start_chan(const struct pasemi_dmachan *chan, const u32 cmdsta) +{ + if (chan->chan_type == RXCHAN) + pasemi_write_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(chan->chno), + cmdsta | PAS_DMA_RXCHAN_CCMDSTA_EN); + else + pasemi_write_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(chan->chno), + cmdsta | PAS_DMA_TXCHAN_TCMDSTA_EN); +} +EXPORT_SYMBOL(pasemi_dma_start_chan); + +/* pasemi_dma_stop_chan - Stop a DMA channel + * @chan: Channel to stop + * + * Stops (disables) a DMA channel. This is done by setting the ST bit in the + * CMDSTA register and waiting on the ACT (active) bit to clear, then + * finally disabling the whole channel. + * + * This function will only try for a short while for the channel to stop, if + * it doesn't it will return failure. + * + * Returns 1 on success, 0 on failure. + */ +#define MAX_RETRIES 5000 +int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan) +{ + int reg, retries; + u32 sta; + + if (chan->chan_type == RXCHAN) { + reg = PAS_DMA_RXCHAN_CCMDSTA(chan->chno); + pasemi_write_dma_reg(reg, PAS_DMA_RXCHAN_CCMDSTA_ST); + for (retries = 0; retries < MAX_RETRIES; retries++) { + sta = pasemi_read_dma_reg(reg); + if (!(sta & PAS_DMA_RXCHAN_CCMDSTA_ACT)) { + pasemi_write_dma_reg(reg, 0); + return 1; + } + cond_resched(); + } + } else { + reg = PAS_DMA_TXCHAN_TCMDSTA(chan->chno); + pasemi_write_dma_reg(reg, PAS_DMA_TXCHAN_TCMDSTA_ST); + for (retries = 0; retries < MAX_RETRIES; retries++) { + sta = pasemi_read_dma_reg(reg); + if (!(sta & PAS_DMA_TXCHAN_TCMDSTA_ACT)) { + pasemi_write_dma_reg(reg, 0); + return 1; + } + cond_resched(); + } + } + + return 0; +} +EXPORT_SYMBOL(pasemi_dma_stop_chan); + +/* pasemi_dma_alloc_buf - Allocate a buffer to use for DMA + * @chan: Channel to allocate for + * @size: Size of buffer in bytes + * @handle: DMA handle + * + * Allocate a buffer to be used by the DMA engine for read/write, + * similar to dma_alloc_coherent(). + * + * Returns the virtual address of the buffer, or NULL in case of failure. + */ +void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, + dma_addr_t *handle) +{ + return dma_alloc_coherent(&dma_pdev->dev, size, handle, GFP_KERNEL); +} +EXPORT_SYMBOL(pasemi_dma_alloc_buf); + +/* pasemi_dma_free_buf - Free a buffer used for DMA + * @chan: Channel the buffer was allocated for + * @size: Size of buffer in bytes + * @handle: DMA handle + * + * Frees a previously allocated buffer. + */ +void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, + dma_addr_t *handle) +{ + dma_free_coherent(&dma_pdev->dev, size, handle, GFP_KERNEL); +} +EXPORT_SYMBOL(pasemi_dma_free_buf); + +/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel synchronization + * + * Allocates a flag for use with channel synchronization (event descriptors). + * Returns allocated flag (0-63), < 0 on error. + */ +int pasemi_dma_alloc_flag(void) +{ + int bit; + +retry: + bit = find_next_bit(flags_free, MAX_FLAGS, 0); + if (bit >= MAX_FLAGS) + return -ENOSPC; + if (!test_and_clear_bit(bit, flags_free)) + goto retry; + + return bit; +} +EXPORT_SYMBOL(pasemi_dma_alloc_flag); + + +/* pasemi_dma_free_flag - Deallocates a flag (event) + * @flag: Flag number to deallocate + * + * Frees up a flag so it can be reused for other purposes. + */ +void pasemi_dma_free_flag(int flag) +{ + BUG_ON(test_bit(flag, flags_free)); + BUG_ON(flag >= MAX_FLAGS); + set_bit(flag, flags_free); +} +EXPORT_SYMBOL(pasemi_dma_free_flag); + + +/* pasemi_dma_set_flag - Sets a flag (event) to 1 + * @flag: Flag number to set active + * + * Sets the flag provided to 1. + */ +void pasemi_dma_set_flag(int flag) +{ + BUG_ON(flag >= MAX_FLAGS); + if (flag < 32) + pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag); + else + pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag); +} +EXPORT_SYMBOL(pasemi_dma_set_flag); + +/* pasemi_dma_clear_flag - Sets a flag (event) to 0 + * @flag: Flag number to set inactive + * + * Sets the flag provided to 0. + */ +void pasemi_dma_clear_flag(int flag) +{ + BUG_ON(flag >= MAX_FLAGS); + if (flag < 32) + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag); + else + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag); +} +EXPORT_SYMBOL(pasemi_dma_clear_flag); + +/* pasemi_dma_alloc_fun - Allocate a function engine + * + * Allocates a function engine to use for crypto/checksum offload + * Returns allocated engine (0-8), < 0 on error. + */ +int pasemi_dma_alloc_fun(void) +{ + int bit; + +retry: + bit = find_next_bit(fun_free, MAX_FLAGS, 0); + if (bit >= MAX_FLAGS) + return -ENOSPC; + if (!test_and_clear_bit(bit, fun_free)) + goto retry; + + return bit; +} +EXPORT_SYMBOL(pasemi_dma_alloc_fun); + + +/* pasemi_dma_free_fun - Deallocates a function engine + * @flag: Engine number to deallocate + * + * Frees up a function engine so it can be used for other purposes. + */ +void pasemi_dma_free_fun(int fun) +{ + BUG_ON(test_bit(fun, fun_free)); + BUG_ON(fun >= MAX_FLAGS); + set_bit(fun, fun_free); +} +EXPORT_SYMBOL(pasemi_dma_free_fun); + + +static void *map_onedev(struct pci_dev *p, int index) +{ + struct device_node *dn; + void __iomem *ret; + + dn = pci_device_to_OF_node(p); + if (!dn) + goto fallback; + + ret = of_iomap(dn, index); + if (!ret) + goto fallback; + + return ret; +fallback: + /* This is hardcoded and ugly, but we have some firmware versions + * that don't provide the register space in the device tree. Luckily + * they are at well-known locations so we can just do the math here. + */ + return ioremap(0xe0000000 + (p->devfn << 12), 0x2000); +} + +/* pasemi_dma_init - Initialize the PA Semi DMA library + * + * This function initializes the DMA library. It must be called before + * any other function in the library. + * + * Returns 0 on success, errno on failure. + */ +int pasemi_dma_init(void) +{ + static DEFINE_SPINLOCK(init_lock); + struct pci_dev *iob_pdev; + struct pci_dev *pdev; + struct resource res; + struct device_node *dn; + int i, intf, err = 0; + unsigned long timeout; + u32 tmp; + + if (!machine_is(pasemi)) + return -ENODEV; + + spin_lock(&init_lock); + + /* Make sure we haven't already initialized */ + if (dma_pdev) + goto out; + + iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); + if (!iob_pdev) { + BUG(); + printk(KERN_WARNING "Can't find I/O Bridge\n"); + err = -ENODEV; + goto out; + } + iob_regs = map_onedev(iob_pdev, 0); + + dma_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa007, NULL); + if (!dma_pdev) { + BUG(); + printk(KERN_WARNING "Can't find DMA controller\n"); + err = -ENODEV; + goto out; + } + dma_regs = map_onedev(dma_pdev, 0); + base_hw_irq = virq_to_hw(dma_pdev->irq); + + pci_read_config_dword(dma_pdev, PAS_DMA_CAP_TXCH, &tmp); + num_txch = (tmp & PAS_DMA_CAP_TXCH_TCHN_M) >> PAS_DMA_CAP_TXCH_TCHN_S; + + pci_read_config_dword(dma_pdev, PAS_DMA_CAP_RXCH, &tmp); + num_rxch = (tmp & PAS_DMA_CAP_RXCH_RCHN_M) >> PAS_DMA_CAP_RXCH_RCHN_S; + + intf = 0; + for (pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa006, NULL); + pdev; + pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa006, pdev)) + mac_regs[intf++] = map_onedev(pdev, 0); + + pci_dev_put(pdev); + + for (pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa005, NULL); + pdev; + pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa005, pdev)) + mac_regs[intf++] = map_onedev(pdev, 0); + + pci_dev_put(pdev); + + dn = pci_device_to_OF_node(iob_pdev); + if (dn) + err = of_address_to_resource(dn, 1, &res); + if (!dn || err) { + /* Fallback for old firmware */ + res.start = 0xfd800000; + res.end = res.start + 0x1000; + } + dma_status = __ioremap(res.start, resource_size(&res), 0); + pci_dev_put(iob_pdev); + + for (i = 0; i < MAX_TXCH; i++) + __set_bit(i, txch_free); + + for (i = 0; i < MAX_RXCH; i++) + __set_bit(i, rxch_free); + + timeout = jiffies + HZ; + pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0); + while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) { + if (time_after(jiffies, timeout)) { + pr_warning("Warning: Could not disable RX section\n"); + break; + } + } + + timeout = jiffies + HZ; + pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0); + while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) { + if (time_after(jiffies, timeout)) { + pr_warning("Warning: Could not disable TX section\n"); + break; + } + } + + /* setup resource allocations for the different DMA sections */ + tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG); + pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000); + + /* enable tx section */ + pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN); + + /* enable rx section */ + pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN); + + for (i = 0; i < MAX_FLAGS; i++) + __set_bit(i, flags_free); + + for (i = 0; i < MAX_FUN; i++) + __set_bit(i, fun_free); + + /* clear all status flags */ + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff); + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff); + + printk(KERN_INFO "PA Semi PWRficient DMA library initialized " + "(%d tx, %d rx channels)\n", num_txch, num_rxch); + +out: + spin_unlock(&init_lock); + return err; +} +EXPORT_SYMBOL(pasemi_dma_init); diff --git a/kernel/arch/powerpc/platforms/pasemi/gpio_mdio.c b/kernel/arch/powerpc/platforms/pasemi/gpio_mdio.c new file mode 100644 index 000000000..ae3f47b25 --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/gpio_mdio.c @@ -0,0 +1,342 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Author: Olof Johansson, PA Semi + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on drivers/net/fs_enet/mii-bitbang.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/phy.h> +#include <linux/of_address.h> +#include <linux/of_mdio.h> +#include <linux/of_platform.h> + +#define DELAY 1 + +static void __iomem *gpio_regs; + +struct gpio_priv { + int mdc_pin; + int mdio_pin; + int mdio_irqs[PHY_MAX_ADDR]; +}; + +#define MDC_PIN(bus) (((struct gpio_priv *)bus->priv)->mdc_pin) +#define MDIO_PIN(bus) (((struct gpio_priv *)bus->priv)->mdio_pin) + +static inline void mdio_lo(struct mii_bus *bus) +{ + out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus)); +} + +static inline void mdio_hi(struct mii_bus *bus) +{ + out_le32(gpio_regs, 1 << MDIO_PIN(bus)); +} + +static inline void mdc_lo(struct mii_bus *bus) +{ + out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus)); +} + +static inline void mdc_hi(struct mii_bus *bus) +{ + out_le32(gpio_regs, 1 << MDC_PIN(bus)); +} + +static inline void mdio_active(struct mii_bus *bus) +{ + out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus))); +} + +static inline void mdio_tristate(struct mii_bus *bus) +{ + out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus))); +} + +static inline int mdio_read(struct mii_bus *bus) +{ + return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus))); +} + +static void clock_out(struct mii_bus *bus, int bit) +{ + if (bit) + mdio_hi(bus); + else + mdio_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); +} + +/* Utility to send the preamble, address, and register (common to read and write). */ +static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg) +{ + int i; + + /* CFE uses a really long preamble (40 bits). We'll do the same. */ + mdio_active(bus); + for (i = 0; i < 40; i++) { + clock_out(bus, 1); + } + + /* send the start bit (01) and the read opcode (10) or write (10) */ + clock_out(bus, 0); + clock_out(bus, 1); + + clock_out(bus, read); + clock_out(bus, !read); + + /* send the PHY address */ + for (i = 0; i < 5; i++) { + clock_out(bus, (addr & 0x10) != 0); + addr <<= 1; + } + + /* send the register address */ + for (i = 0; i < 5; i++) { + clock_out(bus, (reg & 0x10) != 0); + reg <<= 1; + } +} + +static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location) +{ + u16 rdreg; + int ret, i; + u8 addr = phy_id & 0xff; + u8 reg = location & 0xff; + + bitbang_pre(bus, 1, addr, reg); + + /* tri-state our MDIO I/O pin so we can read */ + mdio_tristate(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); + + /* read 16 bits of register data, MSB first */ + rdreg = 0; + for (i = 0; i < 16; i++) { + mdc_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); + udelay(DELAY); + rdreg <<= 1; + rdreg |= mdio_read(bus); + } + + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); + udelay(DELAY); + + ret = rdreg; + + return ret; +} + +static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val) +{ + int i; + + u8 addr = phy_id & 0xff; + u8 reg = location & 0xff; + u16 value = val & 0xffff; + + bitbang_pre(bus, 0, addr, reg); + + /* send the turnaround (10) */ + mdc_lo(bus); + mdio_hi(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); + mdio_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + + /* write 16 bits of register data, MSB first */ + for (i = 0; i < 16; i++) { + mdc_lo(bus); + if (value & 0x8000) + mdio_hi(bus); + else + mdio_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + value <<= 1; + } + + /* + * Tri-state the MDIO line. + */ + mdio_tristate(bus); + mdc_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + return 0; +} + +static int gpio_mdio_reset(struct mii_bus *bus) +{ + /*nothing here - dunno how to reset it*/ + return 0; +} + + +static int gpio_mdio_probe(struct platform_device *ofdev) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct mii_bus *new_bus; + struct gpio_priv *priv; + const unsigned int *prop; + int err; + + err = -ENOMEM; + priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL); + if (!priv) + goto out; + + new_bus = mdiobus_alloc(); + + if (!new_bus) + goto out_free_priv; + + new_bus->name = "pasemi gpio mdio bus"; + new_bus->read = &gpio_mdio_read; + new_bus->write = &gpio_mdio_write; + new_bus->reset = &gpio_mdio_reset; + + prop = of_get_property(np, "reg", NULL); + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop); + new_bus->priv = priv; + + new_bus->irq = priv->mdio_irqs; + + prop = of_get_property(np, "mdc-pin", NULL); + priv->mdc_pin = *prop; + + prop = of_get_property(np, "mdio-pin", NULL); + priv->mdio_pin = *prop; + + new_bus->parent = dev; + dev_set_drvdata(dev, new_bus); + + err = of_mdiobus_register(new_bus, np); + + if (err != 0) { + printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n", + new_bus->name, err); + goto out_free_irq; + } + + return 0; + +out_free_irq: + kfree(new_bus); +out_free_priv: + kfree(priv); +out: + return err; +} + + +static int gpio_mdio_remove(struct platform_device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(&dev->dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(&dev->dev, NULL); + + kfree(bus->priv); + bus->priv = NULL; + mdiobus_free(bus); + + return 0; +} + +static const struct of_device_id gpio_mdio_match[] = +{ + { + .compatible = "gpio-mdio", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, gpio_mdio_match); + +static struct platform_driver gpio_mdio_driver = +{ + .probe = gpio_mdio_probe, + .remove = gpio_mdio_remove, + .driver = { + .name = "gpio-mdio-bitbang", + .of_match_table = gpio_mdio_match, + }, +}; + +int gpio_mdio_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "1682m-gpio"); + if (!np) + np = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gpio"); + if (!np) + return -ENODEV; + gpio_regs = of_iomap(np, 0); + of_node_put(np); + + if (!gpio_regs) + return -ENODEV; + + return platform_driver_register(&gpio_mdio_driver); +} +module_init(gpio_mdio_init); + +void gpio_mdio_exit(void) +{ + platform_driver_unregister(&gpio_mdio_driver); + if (gpio_regs) + iounmap(gpio_regs); +} +module_exit(gpio_mdio_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Olof Johansson <olof@lixom.net>"); +MODULE_DESCRIPTION("Driver for MDIO over GPIO on PA Semi PWRficient-based boards"); diff --git a/kernel/arch/powerpc/platforms/pasemi/idle.c b/kernel/arch/powerpc/platforms/pasemi/idle.c new file mode 100644 index 000000000..75b296bc5 --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/idle.c @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/irq.h> + +#include <asm/machdep.h> +#include <asm/reg.h> +#include <asm/smp.h> + +#include "pasemi.h" + +struct sleep_mode { + char *name; + void (*entry)(void); +}; + +static struct sleep_mode modes[] = { + { .name = "spin", .entry = &idle_spin }, + { .name = "doze", .entry = &idle_doze }, +}; + +static int current_mode = 0; + +static int pasemi_system_reset_exception(struct pt_regs *regs) +{ + /* If we were woken up from power savings, we need to return + * to the calling function, since nip is not saved across + * all modes. + */ + + if (regs->msr & SRR1_WAKEMASK) + regs->nip = regs->link; + + switch (regs->msr & SRR1_WAKEMASK) { + case SRR1_WAKEEE: + do_IRQ(regs); + break; + case SRR1_WAKEDEC: + timer_interrupt(regs); + break; + default: + /* do system reset */ + return 0; + } + + /* Set higher astate since we come out of power savings at 0 */ + restore_astate(hard_smp_processor_id()); + + /* everything handled */ + regs->msr |= MSR_RI; + return 1; +} + +static int __init pasemi_idle_init(void) +{ +#ifndef CONFIG_PPC_PASEMI_CPUFREQ + printk(KERN_WARNING "No cpufreq driver, powersavings modes disabled\n"); + current_mode = 0; +#endif + + ppc_md.system_reset_exception = pasemi_system_reset_exception; + ppc_md.power_save = modes[current_mode].entry; + printk(KERN_INFO "Using PA6T idle loop (%s)\n", modes[current_mode].name); + + return 0; +} +machine_late_initcall(pasemi, pasemi_idle_init); + +static int __init idle_param(char *p) +{ + int i; + for (i = 0; i < ARRAY_SIZE(modes); i++) { + if (!strcmp(modes[i].name, p)) { + current_mode = i; + break; + } + } + return 0; +} + +early_param("idle", idle_param); diff --git a/kernel/arch/powerpc/platforms/pasemi/iommu.c b/kernel/arch/powerpc/platforms/pasemi/iommu.c new file mode 100644 index 000000000..b8f567b2e --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/iommu.c @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2005-2008, PA Semi, Inc + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef DEBUG + +#include <linux/memblock.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/pci.h> +#include <asm/iommu.h> +#include <asm/machdep.h> +#include <asm/firmware.h> + +#include "pasemi.h" + +#define IOBMAP_PAGE_SHIFT 12 +#define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT) +#define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1) + +#define IOB_BASE 0xe0000000 +#define IOB_SIZE 0x3000 +/* Configuration registers */ +#define IOBCAP_REG 0x40 +#define IOBCOM_REG 0x100 +/* Enable IOB address translation */ +#define IOBCOM_ATEN 0x00000100 + +/* Address decode configuration register */ +#define IOB_AD_REG 0x14c +/* IOBCOM_AD_REG fields */ +#define IOB_AD_VGPRT 0x00000e00 +#define IOB_AD_VGAEN 0x00000100 +/* Direct mapping settings */ +#define IOB_AD_MPSEL_MASK 0x00000030 +#define IOB_AD_MPSEL_B38 0x00000000 +#define IOB_AD_MPSEL_B40 0x00000010 +#define IOB_AD_MPSEL_B42 0x00000020 +/* Translation window size / enable */ +#define IOB_AD_TRNG_MASK 0x00000003 +#define IOB_AD_TRNG_256M 0x00000000 +#define IOB_AD_TRNG_2G 0x00000001 +#define IOB_AD_TRNG_128G 0x00000003 + +#define IOB_TABLEBASE_REG 0x154 + +/* Base of the 64 4-byte L1 registers */ +#define IOB_XLT_L1_REGBASE 0x2b00 + +/* Register to invalidate TLB entries */ +#define IOB_AT_INVAL_TLB_REG 0x2d00 + +/* The top two bits of the level 1 entry contains valid and type flags */ +#define IOBMAP_L1E_V 0x40000000 +#define IOBMAP_L1E_V_B 0x80000000 + +/* For big page entries, the bottom two bits contains flags */ +#define IOBMAP_L1E_BIG_CACHED 0x00000002 +#define IOBMAP_L1E_BIG_PRIORITY 0x00000001 + +/* For regular level 2 entries, top 2 bits contain valid and cache flags */ +#define IOBMAP_L2E_V 0x80000000 +#define IOBMAP_L2E_V_CACHED 0xc0000000 + +static void __iomem *iob; +static u32 iob_l1_emptyval; +static u32 iob_l2_emptyval; +static u32 *iob_l2_base; + +static struct iommu_table iommu_table_iobmap; +static int iommu_table_iobmap_inited; + +static int iobmap_build(struct iommu_table *tbl, long index, + long npages, unsigned long uaddr, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + u32 *ip; + u32 rpn; + unsigned long bus_addr; + + pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr); + + bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT; + + ip = ((u32 *)tbl->it_base) + index; + + while (npages--) { + rpn = __pa(uaddr) >> IOBMAP_PAGE_SHIFT; + + *(ip++) = IOBMAP_L2E_V | rpn; + /* invalidate tlb, can be optimized more */ + out_le32(iob+IOB_AT_INVAL_TLB_REG, bus_addr >> 14); + + uaddr += IOBMAP_PAGE_SIZE; + bus_addr += IOBMAP_PAGE_SIZE; + } + return 0; +} + + +static void iobmap_free(struct iommu_table *tbl, long index, + long npages) +{ + u32 *ip; + unsigned long bus_addr; + + pr_debug("iobmap: free at: %lx, %lx\n", index, npages); + + bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT; + + ip = ((u32 *)tbl->it_base) + index; + + while (npages--) { + *(ip++) = iob_l2_emptyval; + /* invalidate tlb, can be optimized more */ + out_le32(iob+IOB_AT_INVAL_TLB_REG, bus_addr >> 14); + bus_addr += IOBMAP_PAGE_SIZE; + } +} + + +static void iommu_table_iobmap_setup(void) +{ + pr_debug(" -> %s\n", __func__); + iommu_table_iobmap.it_busno = 0; + iommu_table_iobmap.it_offset = 0; + iommu_table_iobmap.it_page_shift = IOBMAP_PAGE_SHIFT; + + /* it_size is in number of entries */ + iommu_table_iobmap.it_size = + 0x80000000 >> iommu_table_iobmap.it_page_shift; + + /* Initialize the common IOMMU code */ + iommu_table_iobmap.it_base = (unsigned long)iob_l2_base; + iommu_table_iobmap.it_index = 0; + /* XXXOJN tune this to avoid IOB cache invals. + * Should probably be 8 (64 bytes) + */ + iommu_table_iobmap.it_blocksize = 4; + iommu_init_table(&iommu_table_iobmap, 0); + pr_debug(" <- %s\n", __func__); +} + + + +static void pci_dma_bus_setup_pasemi(struct pci_bus *bus) +{ + pr_debug("pci_dma_bus_setup, bus %p, bus->self %p\n", bus, bus->self); + + if (!iommu_table_iobmap_inited) { + iommu_table_iobmap_inited = 1; + iommu_table_iobmap_setup(); + } +} + + +static void pci_dma_dev_setup_pasemi(struct pci_dev *dev) +{ + pr_debug("pci_dma_dev_setup, dev %p (%s)\n", dev, pci_name(dev)); + +#if !defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE) + /* For non-LPAR environment, don't translate anything for the DMA + * engine. The exception to this is if the user has enabled + * CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE at build time. + */ + if (dev->vendor == 0x1959 && dev->device == 0xa007 && + !firmware_has_feature(FW_FEATURE_LPAR)) { + dev->dev.archdata.dma_ops = &dma_direct_ops; + return; + } +#endif + + set_iommu_table_base(&dev->dev, &iommu_table_iobmap); +} + +int __init iob_init(struct device_node *dn) +{ + unsigned long tmp; + u32 regword; + int i; + + pr_debug(" -> %s\n", __func__); + + /* Allocate a spare page to map all invalid IOTLB pages. */ + tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE); + if (!tmp) + panic("IOBMAP: Cannot allocate spare page!"); + /* Empty l1 is marked invalid */ + iob_l1_emptyval = 0; + /* Empty l2 is mapped to dummy page */ + iob_l2_emptyval = IOBMAP_L2E_V | (tmp >> IOBMAP_PAGE_SHIFT); + + iob = ioremap(IOB_BASE, IOB_SIZE); + if (!iob) + panic("IOBMAP: Cannot map registers!"); + + /* setup direct mapping of the L1 entries */ + for (i = 0; i < 64; i++) { + /* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */ + regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12); + out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword); + } + + /* set 2GB translation window, based at 0 */ + regword = in_le32(iob+IOB_AD_REG); + regword &= ~IOB_AD_TRNG_MASK; + regword |= IOB_AD_TRNG_2G; + out_le32(iob+IOB_AD_REG, regword); + + /* Enable translation */ + regword = in_le32(iob+IOBCOM_REG); + regword |= IOBCOM_ATEN; + out_le32(iob+IOBCOM_REG, regword); + + pr_debug(" <- %s\n", __func__); + + return 0; +} + + +/* These are called very early. */ +void __init iommu_init_early_pasemi(void) +{ + int iommu_off; + +#ifndef CONFIG_PPC_PASEMI_IOMMU + iommu_off = 1; +#else + iommu_off = of_chosen && + of_get_property(of_chosen, "linux,iommu-off", NULL); +#endif + if (iommu_off) + return; + + iob_init(NULL); + + pasemi_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pasemi; + pasemi_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pasemi; + ppc_md.tce_build = iobmap_build; + ppc_md.tce_free = iobmap_free; + set_pci_dma_ops(&dma_iommu_ops); +} + +void __init alloc_iobmap_l2(void) +{ +#ifndef CONFIG_PPC_PASEMI_IOMMU + return; +#endif + /* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */ + iob_l2_base = (u32 *)__va(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000)); + + printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base); +} diff --git a/kernel/arch/powerpc/platforms/pasemi/misc.c b/kernel/arch/powerpc/platforms/pasemi/misc.c new file mode 100644 index 000000000..e0ab29976 --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/misc.c @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Parts based on arch/powerpc/sysdev/fsl_soc.c: + * + * 2006 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/of.h> +#include <linux/i2c.h> + +#ifdef CONFIG_I2C_BOARDINFO +/* The below is from fsl_soc.c. It's copied because since there are no + * official bus bindings at this time it doesn't make sense to share across + * the platforms, even though they happen to be common. + */ +struct i2c_driver_device { + char *of_device; + char *i2c_type; +}; + +static struct i2c_driver_device i2c_devices[] __initdata = { + {"dallas,ds1338", "ds1338"}, +}; + +static int __init find_i2c_driver(struct device_node *node, + struct i2c_board_info *info) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) { + if (!of_device_is_compatible(node, i2c_devices[i].of_device)) + continue; + if (strlcpy(info->type, i2c_devices[i].i2c_type, + I2C_NAME_SIZE) >= I2C_NAME_SIZE) + return -ENOMEM; + return 0; + } + return -ENODEV; +} + +static int __init pasemi_register_i2c_devices(void) +{ + struct pci_dev *pdev; + struct device_node *adap_node; + struct device_node *node; + + pdev = NULL; + while ((pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa003, pdev))) { + adap_node = pci_device_to_OF_node(pdev); + + if (!adap_node) + continue; + + node = NULL; + while ((node = of_get_next_child(adap_node, node))) { + struct i2c_board_info info = {}; + const u32 *addr; + int len; + + addr = of_get_property(node, "reg", &len); + if (!addr || len < sizeof(int) || + *addr > (1 << 10) - 1) { + printk(KERN_WARNING + "pasemi_register_i2c_devices: " + "invalid i2c device entry\n"); + continue; + } + + info.irq = irq_of_parse_and_map(node, 0); + if (info.irq == NO_IRQ) + info.irq = -1; + + if (find_i2c_driver(node, &info) < 0) + continue; + + info.addr = *addr; + + i2c_register_board_info(PCI_FUNC(pdev->devfn), &info, + 1); + } + } + return 0; +} +device_initcall(pasemi_register_i2c_devices); +#endif diff --git a/kernel/arch/powerpc/platforms/pasemi/pasemi.h b/kernel/arch/powerpc/platforms/pasemi/pasemi.h new file mode 100644 index 000000000..11f230a48 --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/pasemi.h @@ -0,0 +1,35 @@ +#ifndef _PASEMI_PASEMI_H +#define _PASEMI_PASEMI_H + +extern unsigned long pas_get_boot_time(void); +extern void pas_pci_init(void); +extern void pas_pci_irq_fixup(struct pci_dev *dev); +extern void pas_pci_dma_dev_setup(struct pci_dev *dev); + +extern void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset); + +extern void __init alloc_iobmap_l2(void); +extern void __init pasemi_map_registers(void); + +/* Power savings modes, implemented in asm */ +extern void idle_spin(void); +extern void idle_doze(void); + +/* Restore astate to last set */ +#ifdef CONFIG_PPC_PASEMI_CPUFREQ +extern int check_astate(void); +extern void restore_astate(int cpu); +#else +static inline int check_astate(void) +{ + /* Always return >0 so we never power save */ + return 1; +} +static inline void restore_astate(int cpu) +{ +} +#endif + +extern struct pci_controller_ops pasemi_pci_controller_ops; + +#endif /* _PASEMI_PASEMI_H */ diff --git a/kernel/arch/powerpc/platforms/pasemi/pci.c b/kernel/arch/powerpc/platforms/pasemi/pci.c new file mode 100644 index 000000000..f3a68a0fe --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/pci.c @@ -0,0 +1,246 @@ +/* + * Copyright (C) 2006 PA Semi, Inc + * + * Authors: Kip Walker, PA Semi + * Olof Johansson, PA Semi + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/platforms/maple/pci.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include <linux/kernel.h> +#include <linux/pci.h> + +#include <asm/pci-bridge.h> +#include <asm/machdep.h> + +#include <asm/ppc-pci.h> + +#include "pasemi.h" + +#define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off)) + +static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset) +{ + /* Device 0 Function 0 is special: It's config space spans function 1 as + * well, so allow larger offset. It's really a two-function device but the + * second function does not probe. + */ + if (bus == 0 && devfn == 0) + return offset < 8192; + else + return offset < 4096; +} + +static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose, + u8 bus, u8 devfn, int offset) +{ + return hose->cfg_data + PA_PXP_CFA(bus, devfn, offset); +} + +static inline int is_root_port(int busno, int devfn) +{ + return ((busno == 0) && (PCI_FUNC(devfn) < 4) && + ((PCI_SLOT(devfn) == 16) || (PCI_SLOT(devfn) == 17))); +} + +static inline int is_5945_reg(int reg) +{ + return (((reg >= 0x18) && (reg < 0x34)) || + ((reg >= 0x158) && (reg < 0x178))); +} + +static int workaround_5945(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + void volatile __iomem *addr, *dummy; + int byte; + u32 tmp; + + if (!is_root_port(bus->number, devfn) || !is_5945_reg(offset)) + return 0; + + hose = pci_bus_to_host(bus); + + addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset & ~0x3); + byte = offset & 0x3; + + /* Workaround bug 5945: write 0 to a dummy register before reading, + * and write back what we read. We must read/write the full 32-bit + * contents so we need to shift and mask by hand. + */ + dummy = pa_pxp_cfg_addr(hose, bus->number, devfn, 0x10); + out_le32(dummy, 0); + tmp = in_le32(addr); + out_le32(addr, tmp); + + switch (len) { + case 1: + *val = (tmp >> (8*byte)) & 0xff; + break; + case 2: + if (byte == 0) + *val = tmp & 0xffff; + else + *val = (tmp >> 16) & 0xffff; + break; + default: + *val = tmp; + break; + } + + return 1; +} + +static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + void volatile __iomem *addr; + + hose = pci_bus_to_host(bus); + if (!hose) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (!pa_pxp_offset_valid(bus->number, devfn, offset)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (workaround_5945(bus, devfn, offset, len, val)) + return PCIBIOS_SUCCESSFUL; + + addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset); + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_le16(addr); + break; + default: + *val = in_le32(addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + void volatile __iomem *addr; + + hose = pci_bus_to_host(bus); + if (!hose) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (!pa_pxp_offset_valid(bus->number, devfn, offset)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset); + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8(addr, val); + break; + case 2: + out_le16(addr, val); + break; + default: + out_le32(addr, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pa_pxp_ops = { + .read = pa_pxp_read_config, + .write = pa_pxp_write_config, +}; + +static void __init setup_pa_pxp(struct pci_controller *hose) +{ + hose->ops = &pa_pxp_ops; + hose->cfg_data = ioremap(0xe0000000, 0x10000000); +} + +static int __init pas_add_bridge(struct device_node *dev) +{ + struct pci_controller *hose; + + pr_debug("Adding PCI host bridge %s\n", dev->full_name); + + hose = pcibios_alloc_controller(dev); + if (!hose) + return -ENOMEM; + + hose->first_busno = 0; + hose->last_busno = 0xff; + hose->controller_ops = pasemi_pci_controller_ops; + + setup_pa_pxp(hose); + + printk(KERN_INFO "Found PA-PXP PCI host bridge.\n"); + + /* Interpret the "ranges" property */ + pci_process_bridge_OF_ranges(hose, dev, 1); + + return 0; +} + +void __init pas_pci_init(void) +{ + struct device_node *np, *root; + + root = of_find_node_by_path("/"); + if (!root) { + printk(KERN_CRIT "pas_pci_init: can't find root " + "of device tree\n"); + return; + } + + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) + if (np->name && !strcmp(np->name, "pxp") && !pas_add_bridge(np)) + of_node_get(np); + + of_node_put(root); + + /* Setup the linkage between OF nodes and PHBs */ + pci_devs_phb_init(); +} + +void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset) +{ + struct pci_controller *hose; + + hose = pci_bus_to_host(dev->bus); + + return (void __iomem *)pa_pxp_cfg_addr(hose, dev->bus->number, dev->devfn, offset); +} + +struct pci_controller_ops pasemi_pci_controller_ops; diff --git a/kernel/arch/powerpc/platforms/pasemi/powersave.S b/kernel/arch/powerpc/platforms/pasemi/powersave.S new file mode 100644 index 000000000..81ab555aa --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/powersave.S @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/cputable.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> + +/* Power savings opcodes since not all binutils have them at this time */ +#define DOZE .long 0x4c000324 +#define NAP .long 0x4c000364 +#define SLEEP .long 0x4c0003a4 +#define RVW .long 0x4c0003e4 + +/* Common sequence to do before going to any of the + * powersavings modes. + */ + +#define PRE_SLEEP_SEQUENCE \ + std r3,8(r1); \ + ptesync ; \ + ld r3,8(r1); \ +1: cmpd r3,r3; \ + bne 1b + +_doze: + PRE_SLEEP_SEQUENCE + DOZE + b . + + +_GLOBAL(idle_spin) + blr + +_GLOBAL(idle_doze) + LOAD_REG_ADDR(r3, _doze) + b sleep_common + +/* Add more modes here later */ + +sleep_common: + mflr r0 + std r0, 16(r1) + stdu r1,-64(r1) +#ifdef CONFIG_PPC_PASEMI_CPUFREQ + std r3, 48(r1) + + /* Only do power savings when in astate 0 */ + bl check_astate + cmpwi r3,0 + bne 1f + + ld r3, 48(r1) +#endif + LOAD_REG_IMMEDIATE(r6,MSR_DR|MSR_IR|MSR_ME|MSR_EE) + mfmsr r4 + andc r5,r4,r6 + mtmsrd r5,0 + + mtctr r3 + bctrl + + mtmsrd r4,0 + +1: addi r1,r1,64 + ld r0,16(r1) + mtlr r0 + blr + diff --git a/kernel/arch/powerpc/platforms/pasemi/setup.c b/kernel/arch/powerpc/platforms/pasemi/setup.c new file mode 100644 index 000000000..d71b2c7e8 --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/setup.c @@ -0,0 +1,448 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Authors: Kip Walker, PA Semi + * Olof Johansson, PA Semi + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/platforms/maple/setup.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/console.h> +#include <linux/export.h> +#include <linux/pci.h> +#include <linux/of_platform.h> +#include <linux/gfp.h> + +#include <asm/prom.h> +#include <asm/iommu.h> +#include <asm/machdep.h> +#include <asm/mpic.h> +#include <asm/smp.h> +#include <asm/time.h> +#include <asm/mmu.h> +#include <asm/debug.h> + +#include <pcmcia/ss.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> + +#include "pasemi.h" + +/* SDC reset register, must be pre-mapped at reset time */ +static void __iomem *reset_reg; + +/* Various error status registers, must be pre-mapped at MCE time */ + +#define MAX_MCE_REGS 32 +struct mce_regs { + char *name; + void __iomem *addr; +}; + +static struct mce_regs mce_regs[MAX_MCE_REGS]; +static int num_mce_regs; +static int nmi_virq = NO_IRQ; + + +static void pas_restart(char *cmd) +{ + /* Need to put others cpu in hold loop so they're not sleeping */ + smp_send_stop(); + udelay(10000); + printk("Restarting...\n"); + while (1) + out_le32(reset_reg, 0x6000000); +} + +#ifdef CONFIG_SMP +static arch_spinlock_t timebase_lock; +static unsigned long timebase; + +static void pas_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + hard_irq_disable(); + arch_spin_lock(&timebase_lock); + mtspr(SPRN_TBCTL, TBCTL_FREEZE); + isync(); + timebase = get_tb(); + arch_spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + mtspr(SPRN_TBCTL, TBCTL_RESTART); + local_irq_restore(flags); +} + +static void pas_take_timebase(void) +{ + while (!timebase) + smp_rmb(); + + arch_spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + arch_spin_unlock(&timebase_lock); +} + +struct smp_ops_t pas_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .kick_cpu = smp_generic_kick_cpu, + .setup_cpu = smp_mpic_setup_cpu, + .give_timebase = pas_give_timebase, + .take_timebase = pas_take_timebase, +}; +#endif /* CONFIG_SMP */ + +void __init pas_setup_arch(void) +{ +#ifdef CONFIG_SMP + /* Setup SMP callback */ + smp_ops = &pas_smp_ops; +#endif + /* Lookup PCI hosts */ + pas_pci_init(); + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + /* Remap SDC register for doing reset */ + /* XXXOJN This should maybe come out of the device tree */ + reset_reg = ioremap(0xfc101100, 4); +} + +static int __init pas_setup_mce_regs(void) +{ + struct pci_dev *dev; + int reg; + + /* Remap various SoC status registers for use by the MCE handler */ + + reg = 0; + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL); + while (dev && reg < MAX_MCE_REGS) { + mce_regs[reg].name = kasprintf(GFP_KERNEL, + "mc%d_mcdebug_errsta", reg); + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730); + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev); + reg++; + } + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); + if (dev && reg+4 < MAX_MCE_REGS) { + mce_regs[reg].name = "iobdbg_IntStatus1"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438); + reg++; + mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454); + reg++; + mce_regs[reg].name = "iobiom_IntStatus"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10); + reg++; + mce_regs[reg].name = "iobiom_IntDbgReg"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c); + reg++; + } + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL); + if (dev && reg+2 < MAX_MCE_REGS) { + mce_regs[reg].name = "l2csts_IntStatus"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200); + reg++; + mce_regs[reg].name = "l2csts_Cnt"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214); + reg++; + } + + num_mce_regs = reg; + + return 0; +} +machine_device_initcall(pasemi, pas_setup_mce_regs); + +static __init void pas_init_IRQ(void) +{ + struct device_node *np; + struct device_node *root, *mpic_node; + unsigned long openpic_addr; + const unsigned int *opprop; + int naddr, opplen; + int mpic_flags; + const unsigned int *nmiprop; + struct mpic *mpic; + + mpic_node = NULL; + + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "open-pic")) { + mpic_node = np; + break; + } + if (!mpic_node) + for_each_node_by_type(np, "open-pic") { + mpic_node = np; + break; + } + if (!mpic_node) { + printk(KERN_ERR + "Failed to locate the MPIC interrupt controller\n"); + return; + } + + /* Find address list in /platform-open-pic */ + root = of_find_node_by_path("/"); + naddr = of_n_addr_cells(root); + opprop = of_get_property(root, "platform-open-pic", &opplen); + if (!opprop) { + printk(KERN_ERR "No platform-open-pic property.\n"); + of_node_put(root); + return; + } + openpic_addr = of_read_number(opprop, naddr); + printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); + + mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET; + + nmiprop = of_get_property(mpic_node, "nmi-source", NULL); + if (nmiprop) + mpic_flags |= MPIC_ENABLE_MCK; + + mpic = mpic_alloc(mpic_node, openpic_addr, + mpic_flags, 0, 0, "PASEMI-OPIC"); + BUG_ON(!mpic); + + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000); + mpic_init(mpic); + /* The NMI/MCK source needs to be prio 15 */ + if (nmiprop) { + nmi_virq = irq_create_mapping(NULL, *nmiprop); + mpic_irq_set_priority(nmi_virq, 15); + irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING); + mpic_unmask_irq(irq_get_irq_data(nmi_virq)); + } + + of_node_put(mpic_node); + of_node_put(root); +} + +static void __init pas_progress(char *s, unsigned short hex) +{ + printk("[%04x] : %s\n", hex, s ? s : ""); +} + + +static int pas_machine_check_handler(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + unsigned long srr0, srr1, dsisr; + int dump_slb = 0; + int i; + + srr0 = regs->nip; + srr1 = regs->msr; + + if (nmi_virq != NO_IRQ && mpic_get_mcirq() == nmi_virq) { + printk(KERN_ERR "NMI delivered\n"); + debugger(regs); + mpic_end_irq(irq_get_irq_data(nmi_virq)); + goto out; + } + + dsisr = mfspr(SPRN_DSISR); + printk(KERN_ERR "Machine Check on CPU %d\n", cpu); + printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); + printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); + printk(KERN_ERR "BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER), + mfspr(SPRN_PA6T_MER)); + printk(KERN_ERR "IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER), + mfspr(SPRN_PA6T_DER)); + printk(KERN_ERR "Cause:\n"); + + if (srr1 & 0x200000) + printk(KERN_ERR "Signalled by SDC\n"); + + if (srr1 & 0x100000) { + printk(KERN_ERR "Load/Store detected error:\n"); + if (dsisr & 0x8000) + printk(KERN_ERR "D-cache ECC double-bit error or bus error\n"); + if (dsisr & 0x4000) + printk(KERN_ERR "LSU snoop response error\n"); + if (dsisr & 0x2000) { + printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n"); + dump_slb = 1; + } + if (dsisr & 0x1000) + printk(KERN_ERR "Recoverable Duptags\n"); + if (dsisr & 0x800) + printk(KERN_ERR "Recoverable D-cache parity error count overflow\n"); + if (dsisr & 0x400) + printk(KERN_ERR "TLB parity error count overflow\n"); + } + + if (srr1 & 0x80000) + printk(KERN_ERR "Bus Error\n"); + + if (srr1 & 0x40000) { + printk(KERN_ERR "I-side SLB multiple hit\n"); + dump_slb = 1; + } + + if (srr1 & 0x20000) + printk(KERN_ERR "I-cache parity error hit\n"); + + if (num_mce_regs == 0) + printk(KERN_ERR "No MCE registers mapped yet, can't dump\n"); + else + printk(KERN_ERR "SoC debug registers:\n"); + + for (i = 0; i < num_mce_regs; i++) + printk(KERN_ERR "%s: 0x%08x\n", mce_regs[i].name, + in_le32(mce_regs[i].addr)); + + if (dump_slb) { + unsigned long e, v; + int i; + + printk(KERN_ERR "slb contents:\n"); + for (i = 0; i < mmu_slb_size; i++) { + asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i)); + asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i)); + printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v); + } + } + +out: + /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ + return !!(srr1 & 0x2); +} + +static void __init pas_init_early(void) +{ + iommu_init_early_pasemi(); +} + +#ifdef CONFIG_PCMCIA +static int pcmcia_notify(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct device *dev = data; + struct device *parent; + struct pcmcia_device *pdev = to_pcmcia_dev(dev); + + /* We are only intereted in device addition */ + if (action != BUS_NOTIFY_ADD_DEVICE) + return 0; + + parent = pdev->socket->dev.parent; + + /* We know electra_cf devices will always have of_node set, since + * electra_cf is an of_platform driver. + */ + if (!parent->of_node) + return 0; + + if (!of_device_is_compatible(parent->of_node, "electra-cf")) + return 0; + + /* We use the direct ops for localbus */ + dev->archdata.dma_ops = &dma_direct_ops; + + return 0; +} + +static struct notifier_block pcmcia_notifier = { + .notifier_call = pcmcia_notify, +}; + +static inline void pasemi_pcmcia_init(void) +{ + extern struct bus_type pcmcia_bus_type; + + bus_register_notifier(&pcmcia_bus_type, &pcmcia_notifier); +} + +#else + +static inline void pasemi_pcmcia_init(void) +{ +} + +#endif + + +static const struct of_device_id pasemi_bus_ids[] = { + /* Unfortunately needed for legacy firmwares */ + { .type = "localbus", }, + { .type = "sdc", }, + /* These are the proper entries, which newer firmware uses */ + { .compatible = "pasemi,localbus", }, + { .compatible = "pasemi,sdc", }, + {}, +}; + +static int __init pasemi_publish_devices(void) +{ + pasemi_pcmcia_init(); + + /* Publish OF platform devices for SDC and other non-PCI devices */ + of_platform_bus_probe(NULL, pasemi_bus_ids, NULL); + + return 0; +} +machine_device_initcall(pasemi, pasemi_publish_devices); + + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init pas_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "PA6T-1682M") && + !of_flat_dt_is_compatible(root, "pasemi,pwrficient")) + return 0; + + hpte_init_native(); + + alloc_iobmap_l2(); + + return 1; +} + +define_machine(pasemi) { + .name = "PA Semi PWRficient", + .probe = pas_probe, + .setup_arch = pas_setup_arch, + .init_early = pas_init_early, + .init_IRQ = pas_init_IRQ, + .get_irq = mpic_get_irq, + .restart = pas_restart, + .get_boot_time = pas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .progress = pas_progress, + .machine_check_exception = pas_machine_check_handler, +}; diff --git a/kernel/arch/powerpc/platforms/pasemi/time.c b/kernel/arch/powerpc/platforms/pasemi/time.c new file mode 100644 index 000000000..fa54351ac --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/time.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2006 PA Semi, Inc + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/time.h> + +#include <asm/time.h> + +unsigned long __init pas_get_boot_time(void) +{ + /* Let's just return a fake date right now */ + return mktime(2006, 1, 1, 12, 0, 0); +} |