diff options
Diffstat (limited to 'kernel/arch/powerpc/platforms/pasemi/setup.c')
| -rw-r--r-- | kernel/arch/powerpc/platforms/pasemi/setup.c | 448 |
1 files changed, 448 insertions, 0 deletions
diff --git a/kernel/arch/powerpc/platforms/pasemi/setup.c b/kernel/arch/powerpc/platforms/pasemi/setup.c new file mode 100644 index 000000000..d71b2c7e8 --- /dev/null +++ b/kernel/arch/powerpc/platforms/pasemi/setup.c @@ -0,0 +1,448 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Authors: Kip Walker, PA Semi + * Olof Johansson, PA Semi + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/platforms/maple/setup.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/console.h> +#include <linux/export.h> +#include <linux/pci.h> +#include <linux/of_platform.h> +#include <linux/gfp.h> + +#include <asm/prom.h> +#include <asm/iommu.h> +#include <asm/machdep.h> +#include <asm/mpic.h> +#include <asm/smp.h> +#include <asm/time.h> +#include <asm/mmu.h> +#include <asm/debug.h> + +#include <pcmcia/ss.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> + +#include "pasemi.h" + +/* SDC reset register, must be pre-mapped at reset time */ +static void __iomem *reset_reg; + +/* Various error status registers, must be pre-mapped at MCE time */ + +#define MAX_MCE_REGS 32 +struct mce_regs { + char *name; + void __iomem *addr; +}; + +static struct mce_regs mce_regs[MAX_MCE_REGS]; +static int num_mce_regs; +static int nmi_virq = NO_IRQ; + + +static void pas_restart(char *cmd) +{ + /* Need to put others cpu in hold loop so they're not sleeping */ + smp_send_stop(); + udelay(10000); + printk("Restarting...\n"); + while (1) + out_le32(reset_reg, 0x6000000); +} + +#ifdef CONFIG_SMP +static arch_spinlock_t timebase_lock; +static unsigned long timebase; + +static void pas_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + hard_irq_disable(); + arch_spin_lock(&timebase_lock); + mtspr(SPRN_TBCTL, TBCTL_FREEZE); + isync(); + timebase = get_tb(); + arch_spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + mtspr(SPRN_TBCTL, TBCTL_RESTART); + local_irq_restore(flags); +} + +static void pas_take_timebase(void) +{ + while (!timebase) + smp_rmb(); + + arch_spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + arch_spin_unlock(&timebase_lock); +} + +struct smp_ops_t pas_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .kick_cpu = smp_generic_kick_cpu, + .setup_cpu = smp_mpic_setup_cpu, + .give_timebase = pas_give_timebase, + .take_timebase = pas_take_timebase, +}; +#endif /* CONFIG_SMP */ + +void __init pas_setup_arch(void) +{ +#ifdef CONFIG_SMP + /* Setup SMP callback */ + smp_ops = &pas_smp_ops; +#endif + /* Lookup PCI hosts */ + pas_pci_init(); + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + /* Remap SDC register for doing reset */ + /* XXXOJN This should maybe come out of the device tree */ + reset_reg = ioremap(0xfc101100, 4); +} + +static int __init pas_setup_mce_regs(void) +{ + struct pci_dev *dev; + int reg; + + /* Remap various SoC status registers for use by the MCE handler */ + + reg = 0; + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL); + while (dev && reg < MAX_MCE_REGS) { + mce_regs[reg].name = kasprintf(GFP_KERNEL, + "mc%d_mcdebug_errsta", reg); + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730); + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev); + reg++; + } + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); + if (dev && reg+4 < MAX_MCE_REGS) { + mce_regs[reg].name = "iobdbg_IntStatus1"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438); + reg++; + mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454); + reg++; + mce_regs[reg].name = "iobiom_IntStatus"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10); + reg++; + mce_regs[reg].name = "iobiom_IntDbgReg"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c); + reg++; + } + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL); + if (dev && reg+2 < MAX_MCE_REGS) { + mce_regs[reg].name = "l2csts_IntStatus"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200); + reg++; + mce_regs[reg].name = "l2csts_Cnt"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214); + reg++; + } + + num_mce_regs = reg; + + return 0; +} +machine_device_initcall(pasemi, pas_setup_mce_regs); + +static __init void pas_init_IRQ(void) +{ + struct device_node *np; + struct device_node *root, *mpic_node; + unsigned long openpic_addr; + const unsigned int *opprop; + int naddr, opplen; + int mpic_flags; + const unsigned int *nmiprop; + struct mpic *mpic; + + mpic_node = NULL; + + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "open-pic")) { + mpic_node = np; + break; + } + if (!mpic_node) + for_each_node_by_type(np, "open-pic") { + mpic_node = np; + break; + } + if (!mpic_node) { + printk(KERN_ERR + "Failed to locate the MPIC interrupt controller\n"); + return; + } + + /* Find address list in /platform-open-pic */ + root = of_find_node_by_path("/"); + naddr = of_n_addr_cells(root); + opprop = of_get_property(root, "platform-open-pic", &opplen); + if (!opprop) { + printk(KERN_ERR "No platform-open-pic property.\n"); + of_node_put(root); + return; + } + openpic_addr = of_read_number(opprop, naddr); + printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); + + mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET; + + nmiprop = of_get_property(mpic_node, "nmi-source", NULL); + if (nmiprop) + mpic_flags |= MPIC_ENABLE_MCK; + + mpic = mpic_alloc(mpic_node, openpic_addr, + mpic_flags, 0, 0, "PASEMI-OPIC"); + BUG_ON(!mpic); + + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000); + mpic_init(mpic); + /* The NMI/MCK source needs to be prio 15 */ + if (nmiprop) { + nmi_virq = irq_create_mapping(NULL, *nmiprop); + mpic_irq_set_priority(nmi_virq, 15); + irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING); + mpic_unmask_irq(irq_get_irq_data(nmi_virq)); + } + + of_node_put(mpic_node); + of_node_put(root); +} + +static void __init pas_progress(char *s, unsigned short hex) +{ + printk("[%04x] : %s\n", hex, s ? s : ""); +} + + +static int pas_machine_check_handler(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + unsigned long srr0, srr1, dsisr; + int dump_slb = 0; + int i; + + srr0 = regs->nip; + srr1 = regs->msr; + + if (nmi_virq != NO_IRQ && mpic_get_mcirq() == nmi_virq) { + printk(KERN_ERR "NMI delivered\n"); + debugger(regs); + mpic_end_irq(irq_get_irq_data(nmi_virq)); + goto out; + } + + dsisr = mfspr(SPRN_DSISR); + printk(KERN_ERR "Machine Check on CPU %d\n", cpu); + printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); + printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); + printk(KERN_ERR "BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER), + mfspr(SPRN_PA6T_MER)); + printk(KERN_ERR "IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER), + mfspr(SPRN_PA6T_DER)); + printk(KERN_ERR "Cause:\n"); + + if (srr1 & 0x200000) + printk(KERN_ERR "Signalled by SDC\n"); + + if (srr1 & 0x100000) { + printk(KERN_ERR "Load/Store detected error:\n"); + if (dsisr & 0x8000) + printk(KERN_ERR "D-cache ECC double-bit error or bus error\n"); + if (dsisr & 0x4000) + printk(KERN_ERR "LSU snoop response error\n"); + if (dsisr & 0x2000) { + printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n"); + dump_slb = 1; + } + if (dsisr & 0x1000) + printk(KERN_ERR "Recoverable Duptags\n"); + if (dsisr & 0x800) + printk(KERN_ERR "Recoverable D-cache parity error count overflow\n"); + if (dsisr & 0x400) + printk(KERN_ERR "TLB parity error count overflow\n"); + } + + if (srr1 & 0x80000) + printk(KERN_ERR "Bus Error\n"); + + if (srr1 & 0x40000) { + printk(KERN_ERR "I-side SLB multiple hit\n"); + dump_slb = 1; + } + + if (srr1 & 0x20000) + printk(KERN_ERR "I-cache parity error hit\n"); + + if (num_mce_regs == 0) + printk(KERN_ERR "No MCE registers mapped yet, can't dump\n"); + else + printk(KERN_ERR "SoC debug registers:\n"); + + for (i = 0; i < num_mce_regs; i++) + printk(KERN_ERR "%s: 0x%08x\n", mce_regs[i].name, + in_le32(mce_regs[i].addr)); + + if (dump_slb) { + unsigned long e, v; + int i; + + printk(KERN_ERR "slb contents:\n"); + for (i = 0; i < mmu_slb_size; i++) { + asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i)); + asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i)); + printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v); + } + } + +out: + /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ + return !!(srr1 & 0x2); +} + +static void __init pas_init_early(void) +{ + iommu_init_early_pasemi(); +} + +#ifdef CONFIG_PCMCIA +static int pcmcia_notify(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct device *dev = data; + struct device *parent; + struct pcmcia_device *pdev = to_pcmcia_dev(dev); + + /* We are only intereted in device addition */ + if (action != BUS_NOTIFY_ADD_DEVICE) + return 0; + + parent = pdev->socket->dev.parent; + + /* We know electra_cf devices will always have of_node set, since + * electra_cf is an of_platform driver. + */ + if (!parent->of_node) + return 0; + + if (!of_device_is_compatible(parent->of_node, "electra-cf")) + return 0; + + /* We use the direct ops for localbus */ + dev->archdata.dma_ops = &dma_direct_ops; + + return 0; +} + +static struct notifier_block pcmcia_notifier = { + .notifier_call = pcmcia_notify, +}; + +static inline void pasemi_pcmcia_init(void) +{ + extern struct bus_type pcmcia_bus_type; + + bus_register_notifier(&pcmcia_bus_type, &pcmcia_notifier); +} + +#else + +static inline void pasemi_pcmcia_init(void) +{ +} + +#endif + + +static const struct of_device_id pasemi_bus_ids[] = { + /* Unfortunately needed for legacy firmwares */ + { .type = "localbus", }, + { .type = "sdc", }, + /* These are the proper entries, which newer firmware uses */ + { .compatible = "pasemi,localbus", }, + { .compatible = "pasemi,sdc", }, + {}, +}; + +static int __init pasemi_publish_devices(void) +{ + pasemi_pcmcia_init(); + + /* Publish OF platform devices for SDC and other non-PCI devices */ + of_platform_bus_probe(NULL, pasemi_bus_ids, NULL); + + return 0; +} +machine_device_initcall(pasemi, pasemi_publish_devices); + + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init pas_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "PA6T-1682M") && + !of_flat_dt_is_compatible(root, "pasemi,pwrficient")) + return 0; + + hpte_init_native(); + + alloc_iobmap_l2(); + + return 1; +} + +define_machine(pasemi) { + .name = "PA Semi PWRficient", + .probe = pas_probe, + .setup_arch = pas_setup_arch, + .init_early = pas_init_early, + .init_IRQ = pas_init_IRQ, + .get_irq = mpic_get_irq, + .restart = pas_restart, + .get_boot_time = pas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .progress = pas_progress, + .machine_check_exception = pas_machine_check_handler, +}; |