summaryrefslogtreecommitdiffstats
path: root/kernel/arch/powerpc/platforms/maple
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/powerpc/platforms/maple')
-rw-r--r--kernel/arch/powerpc/platforms/maple/Kconfig18
-rw-r--r--kernel/arch/powerpc/platforms/maple/Makefile1
-rw-r--r--kernel/arch/powerpc/platforms/maple/maple.h14
-rw-r--r--kernel/arch/powerpc/platforms/maple/pci.c666
-rw-r--r--kernel/arch/powerpc/platforms/maple/setup.c393
-rw-r--r--kernel/arch/powerpc/platforms/maple/time.c176
6 files changed, 1268 insertions, 0 deletions
diff --git a/kernel/arch/powerpc/platforms/maple/Kconfig b/kernel/arch/powerpc/platforms/maple/Kconfig
new file mode 100644
index 000000000..1ea621a94
--- /dev/null
+++ b/kernel/arch/powerpc/platforms/maple/Kconfig
@@ -0,0 +1,18 @@
+config PPC_MAPLE
+ depends on PPC64 && PPC_BOOK3S
+ bool "Maple 970FX Evaluation Board"
+ select PCI
+ select MPIC
+ select U3_DART
+ select MPIC_U3_HT_IRQS
+ select GENERIC_TBSYNC
+ select PPC_UDBG_16550
+ select PPC_970_NAP
+ select PPC_NATIVE
+ select PPC_RTAS
+ select MMIO_NVRAM
+ select ATA_NONSTANDARD if ATA
+ default n
+ help
+ This option enables support for the Maple 970FX Evaluation Board.
+ For more information, refer to <http://www.970eval.com>
diff --git a/kernel/arch/powerpc/platforms/maple/Makefile b/kernel/arch/powerpc/platforms/maple/Makefile
new file mode 100644
index 000000000..1be1a993c
--- /dev/null
+++ b/kernel/arch/powerpc/platforms/maple/Makefile
@@ -0,0 +1 @@
+obj-y += setup.o pci.o time.o
diff --git a/kernel/arch/powerpc/platforms/maple/maple.h b/kernel/arch/powerpc/platforms/maple/maple.h
new file mode 100644
index 000000000..eecfa182b
--- /dev/null
+++ b/kernel/arch/powerpc/platforms/maple/maple.h
@@ -0,0 +1,14 @@
+/*
+ * Declarations for maple-specific code.
+ *
+ * Maple is the name of a PPC970 evaluation board.
+ */
+extern int maple_set_rtc_time(struct rtc_time *tm);
+extern void maple_get_rtc_time(struct rtc_time *tm);
+extern unsigned long maple_get_boot_time(void);
+extern void maple_calibrate_decr(void);
+extern void maple_pci_init(void);
+extern void maple_pci_irq_fixup(struct pci_dev *dev);
+extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel);
+
+extern struct pci_controller_ops maple_pci_controller_ops;
diff --git a/kernel/arch/powerpc/platforms/maple/pci.c b/kernel/arch/powerpc/platforms/maple/pci.c
new file mode 100644
index 000000000..a923230e5
--- /dev/null
+++ b/kernel/arch/powerpc/platforms/maple/pci.c
@@ -0,0 +1,666 @@
+/*
+ * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
+ * IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/iommu.h>
+#include <asm/ppc-pci.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static struct pci_controller *u3_agp, *u3_ht, *u4_pcie;
+
+static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
+{
+ for (; node != 0;node = node->sibling) {
+ const int *bus_range;
+ const unsigned int *class_code;
+ int len;
+
+ /* For PCI<->PCI bridges or CardBus bridges, we go down */
+ class_code = of_get_property(node, "class-code", NULL);
+ if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+ (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+ continue;
+ bus_range = of_get_property(node, "bus-range", &len);
+ if (bus_range != NULL && len > 2 * sizeof(int)) {
+ if (bus_range[1] > higher)
+ higher = bus_range[1];
+ }
+ higher = fixup_one_level_bus_range(node->child, higher);
+ }
+ return higher;
+}
+
+/* This routine fixes the "bus-range" property of all bridges in the
+ * system since they tend to have their "last" member wrong on macs
+ *
+ * Note that the bus numbers manipulated here are OF bus numbers, they
+ * are not Linux bus numbers.
+ */
+static void __init fixup_bus_range(struct device_node *bridge)
+{
+ int *bus_range;
+ struct property *prop;
+ int len;
+
+ /* Lookup the "bus-range" property for the hose */
+ prop = of_find_property(bridge, "bus-range", &len);
+ if (prop == NULL || prop->value == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s\n",
+ bridge->full_name);
+ return;
+ }
+ bus_range = prop->value;
+ bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
+}
+
+
+static unsigned long u3_agp_cfa0(u8 devfn, u8 off)
+{
+ return (1 << (unsigned long)PCI_SLOT(devfn)) |
+ ((unsigned long)PCI_FUNC(devfn) << 8) |
+ ((unsigned long)off & 0xFCUL);
+}
+
+static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off)
+{
+ return ((unsigned long)bus << 16) |
+ ((unsigned long)devfn << 8) |
+ ((unsigned long)off & 0xFCUL) |
+ 1UL;
+}
+
+static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, u8 offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno) {
+ if (dev_fn < (11 << 3))
+ return NULL;
+ caddr = u3_agp_cfa0(dev_fn, offset);
+ } else
+ caddr = u3_agp_cfa1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x07;
+ return hose->cfg_data + offset;
+}
+
+static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_le16(addr, val);
+ break;
+ default:
+ out_le32(addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_agp_pci_ops =
+{
+ .read = u3_agp_read_config,
+ .write = u3_agp_write_config,
+};
+
+static unsigned long u3_ht_cfa0(u8 devfn, u8 off)
+{
+ return (devfn << 8) | off;
+}
+
+static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off)
+{
+ return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL;
+}
+
+static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 devfn, u8 offset)
+{
+ if (bus == hose->first_busno) {
+ if (PCI_SLOT(devfn) == 0)
+ return NULL;
+ return hose->cfg_data + u3_ht_cfa0(devfn, offset);
+ } else
+ return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
+}
+
+static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
+ int len, u32 *val)
+{
+ volatile void __iomem *addr;
+
+ addr = hose->cfg_addr;
+ addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_be16(addr);
+ break;
+ default:
+ *val = in_be32(addr);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
+ int len, u32 val)
+{
+ volatile void __iomem *addr;
+
+ addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+ if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
+ return PCIBIOS_SUCCESSFUL;
+
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_be16(addr, val);
+ break;
+ default:
+ out_be32(addr, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+ return u3_ht_root_read_config(hose, offset, len, val);
+
+ if (offset > 0xff)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+ return u3_ht_root_write_config(hose, offset, len, val);
+
+ if (offset > 0xff)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_le16(addr, val);
+ break;
+ default:
+ out_le32(addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_ht_pci_ops =
+{
+ .read = u3_ht_read_config,
+ .write = u3_ht_write_config,
+};
+
+static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off)
+{
+ return (1 << PCI_SLOT(devfn)) |
+ (PCI_FUNC(devfn) << 8) |
+ ((off >> 8) << 28) |
+ (off & 0xfcu);
+}
+
+static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn,
+ unsigned int off)
+{
+ return (bus << 16) |
+ (devfn << 8) |
+ ((off >> 8) << 28) |
+ (off & 0xfcu) | 1u;
+}
+
+static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, int offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno)
+ caddr = u4_pcie_cfa0(dev_fn, offset);
+ else
+ caddr = u4_pcie_cfa1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x03;
+ return hose->cfg_data + offset;
+}
+
+static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_le16(addr, val);
+ break;
+ default:
+ out_le32(addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u4_pcie_pci_ops =
+{
+ .read = u4_pcie_read_config,
+ .write = u4_pcie_write_config,
+};
+
+static void __init setup_u3_agp(struct pci_controller* hose)
+{
+ /* On G5, we move AGP up to high bus number so we don't need
+ * to reassign bus numbers for HT. If we ever have P2P bridges
+ * on AGP, we'll have to move pci_assign_all_buses to the
+ * pci_controller structure so we enable it for AGP and not for
+ * HT childs.
+ * We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->first_busno = 0xf0;
+ hose->last_busno = 0xff;
+ hose->ops = &u3_agp_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ u3_agp = hose;
+}
+
+static void __init setup_u4_pcie(struct pci_controller* hose)
+{
+ /* We currently only implement the "non-atomic" config space, to
+ * be optimised later.
+ */
+ hose->ops = &u4_pcie_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ u4_pcie = hose;
+}
+
+static void __init setup_u3_ht(struct pci_controller* hose)
+{
+ hose->ops = &u3_ht_pci_ops;
+
+ /* We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+ hose->cfg_addr = ioremap(0xf8070000, 0x1000);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xef;
+
+ u3_ht = hose;
+}
+
+static int __init maple_add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ char* disp_name;
+ const int *bus_range;
+ int primary = 1;
+
+ DBG("Adding PCI host bridge %s\n", dev->full_name);
+
+ bus_range = of_get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
+ dev->full_name);
+ }
+
+ hose = pcibios_alloc_controller(dev);
+ if (hose == NULL)
+ return -ENOMEM;
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+ hose->controller_ops = maple_pci_controller_ops;
+
+ disp_name = NULL;
+ if (of_device_is_compatible(dev, "u3-agp")) {
+ setup_u3_agp(hose);
+ disp_name = "U3-AGP";
+ primary = 0;
+ } else if (of_device_is_compatible(dev, "u3-ht")) {
+ setup_u3_ht(hose);
+ disp_name = "U3-HT";
+ primary = 1;
+ } else if (of_device_is_compatible(dev, "u4-pcie")) {
+ setup_u4_pcie(hose);
+ disp_name = "U4-PCIE";
+ primary = 0;
+ }
+ printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
+ disp_name, hose->first_busno, hose->last_busno);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ /* Fixup "bus-range" OF property */
+ fixup_bus_range(dev);
+
+ /* Check for legacy IOs */
+ isa_bridge_find_early(hose);
+
+ return 0;
+}
+
+
+void maple_pci_irq_fixup(struct pci_dev *dev)
+{
+ DBG(" -> maple_pci_irq_fixup\n");
+
+ /* Fixup IRQ for PCIe host */
+ if (u4_pcie != NULL && dev->bus->number == 0 &&
+ pci_bus_to_host(dev->bus) == u4_pcie) {
+ printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n");
+ dev->irq = irq_create_mapping(NULL, 1);
+ if (dev->irq != NO_IRQ)
+ irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
+ }
+
+ /* Hide AMD8111 IDE interrupt when in legacy mode so
+ * the driver calls pci_get_legacy_ide_irq()
+ */
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_8111_IDE &&
+ (dev->class & 5) != 5) {
+ dev->irq = NO_IRQ;
+ }
+
+ DBG(" <- maple_pci_irq_fixup\n");
+}
+
+void __init maple_pci_init(void)
+{
+ struct device_node *np, *root;
+ struct device_node *ht = NULL;
+
+ /* Probe root PCI hosts, that is on U3 the AGP host and the
+ * HyperTransport host. That one is actually "kept" around
+ * and actually added last as it's resource management relies
+ * on the AGP resources to have been setup first
+ */
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n");
+ return;
+ }
+ for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
+ if (!np->type)
+ continue;
+ if (strcmp(np->type, "pci") && strcmp(np->type, "ht"))
+ continue;
+ if ((of_device_is_compatible(np, "u4-pcie") ||
+ of_device_is_compatible(np, "u3-agp")) &&
+ maple_add_bridge(np) == 0)
+ of_node_get(np);
+
+ if (of_device_is_compatible(np, "u3-ht")) {
+ of_node_get(np);
+ ht = np;
+ }
+ }
+ of_node_put(root);
+
+ /* Now setup the HyperTransport host if we found any
+ */
+ if (ht && maple_add_bridge(ht) != 0)
+ of_node_put(ht);
+
+ /* Setup the linkage between OF nodes and PHBs */
+ pci_devs_phb_init();
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions hopefully.
+ */
+ if (u3_agp) {
+ struct device_node *np = u3_agp->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for (np = np->child; np; np = np->sibling)
+ PCI_DN(np)->busno = 0xf0;
+ }
+
+ /* Tell pci.c to not change any resource allocations. */
+ pci_add_flags(PCI_PROBE_ONLY);
+}
+
+int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
+{
+ struct device_node *np;
+ unsigned int defirq = channel ? 15 : 14;
+ unsigned int irq;
+
+ if (pdev->vendor != PCI_VENDOR_ID_AMD ||
+ pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
+ return defirq;
+
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL) {
+ printk("Failed to locate OF node for IDE %s\n",
+ pci_name(pdev));
+ return defirq;
+ }
+ irq = irq_of_parse_and_map(np, channel & 0x1);
+ if (irq == NO_IRQ) {
+ printk("Failed to map onboard IDE interrupt for channel %d\n",
+ channel);
+ return defirq;
+ }
+ return irq;
+}
+
+static void quirk_ipr_msi(struct pci_dev *dev)
+{
+ /* Something prevents MSIs from the IPR from working on Bimini,
+ * and the driver has no smarts to recover. So disable MSI
+ * on it for now. */
+
+ if (machine_is(maple)) {
+ dev->no_msi = 1;
+ dev_info(&dev->dev, "Quirk disabled MSI\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
+ quirk_ipr_msi);
+
+struct pci_controller_ops maple_pci_controller_ops = {
+};
diff --git a/kernel/arch/powerpc/platforms/maple/setup.c b/kernel/arch/powerpc/platforms/maple/setup.c
new file mode 100644
index 000000000..a83718854
--- /dev/null
+++ b/kernel/arch/powerpc/platforms/maple/setup.c
@@ -0,0 +1,393 @@
+/*
+ * Maple (970 eval board) setup code
+ *
+ * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
+ * IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/tty.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/vt_kern.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/smp.h>
+#include <linux/bitops.h>
+#include <linux/of_device.h>
+#include <linux/memblock.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/iommu.h>
+#include <asm/machdep.h>
+#include <asm/dma.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+#include <asm/udbg.h>
+#include <asm/nvram.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static unsigned long maple_find_nvram_base(void)
+{
+ struct device_node *rtcs;
+ unsigned long result = 0;
+
+ /* find NVRAM device */
+ rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
+ if (rtcs) {
+ struct resource r;
+ if (of_address_to_resource(rtcs, 0, &r)) {
+ printk(KERN_EMERG "Maple: Unable to translate NVRAM"
+ " address\n");
+ goto bail;
+ }
+ if (!(r.flags & IORESOURCE_IO)) {
+ printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
+ goto bail;
+ }
+ result = r.start;
+ } else
+ printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
+ bail:
+ of_node_put(rtcs);
+ return result;
+}
+
+static void maple_restart(char *cmd)
+{
+ unsigned int maple_nvram_base;
+ const unsigned int *maple_nvram_offset, *maple_nvram_command;
+ struct device_node *sp;
+
+ maple_nvram_base = maple_find_nvram_base();
+ if (maple_nvram_base == 0)
+ goto fail;
+
+ /* find service processor device */
+ sp = of_find_node_by_name(NULL, "service-processor");
+ if (!sp) {
+ printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+ goto fail;
+ }
+ maple_nvram_offset = of_get_property(sp, "restart-addr", NULL);
+ maple_nvram_command = of_get_property(sp, "restart-value", NULL);
+ of_node_put(sp);
+
+ /* send command */
+ outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
+ for (;;) ;
+ fail:
+ printk(KERN_EMERG "Maple: Manual Restart Required\n");
+}
+
+static void maple_power_off(void)
+{
+ unsigned int maple_nvram_base;
+ const unsigned int *maple_nvram_offset, *maple_nvram_command;
+ struct device_node *sp;
+
+ maple_nvram_base = maple_find_nvram_base();
+ if (maple_nvram_base == 0)
+ goto fail;
+
+ /* find service processor device */
+ sp = of_find_node_by_name(NULL, "service-processor");
+ if (!sp) {
+ printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+ goto fail;
+ }
+ maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL);
+ maple_nvram_command = of_get_property(sp, "power-off-value", NULL);
+ of_node_put(sp);
+
+ /* send command */
+ outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
+ for (;;) ;
+ fail:
+ printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
+}
+
+static void maple_halt(void)
+{
+ maple_power_off();
+}
+
+#ifdef CONFIG_SMP
+struct smp_ops_t maple_smp_ops = {
+ .probe = smp_mpic_probe,
+ .message_pass = smp_mpic_message_pass,
+ .kick_cpu = smp_generic_kick_cpu,
+ .setup_cpu = smp_mpic_setup_cpu,
+ .give_timebase = smp_generic_give_timebase,
+ .take_timebase = smp_generic_take_timebase,
+};
+#endif /* CONFIG_SMP */
+
+static void __init maple_use_rtas_reboot_and_halt_if_present(void)
+{
+ if (rtas_service_present("system-reboot") &&
+ rtas_service_present("power-off")) {
+ ppc_md.restart = rtas_restart;
+ pm_power_off = rtas_power_off;
+ ppc_md.halt = rtas_halt;
+ }
+}
+
+void __init maple_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ /* Setup SMP callback */
+#ifdef CONFIG_SMP
+ smp_ops = &maple_smp_ops;
+#endif
+ /* Lookup PCI hosts */
+ maple_pci_init();
+
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+ maple_use_rtas_reboot_and_halt_if_present();
+
+ printk(KERN_DEBUG "Using native/NAP idle loop\n");
+
+ mmio_nvram_init();
+}
+
+/*
+ * Early initialization.
+ */
+static void __init maple_init_early(void)
+{
+ DBG(" -> maple_init_early\n");
+
+ iommu_init_early_dart(&maple_pci_controller_ops);
+
+ DBG(" <- maple_init_early\n");
+}
+
+/*
+ * This is almost identical to pSeries and CHRP. We need to make that
+ * code generic at one point, with appropriate bits in the device-tree to
+ * identify the presence of an HT APIC
+ */
+static void __init maple_init_IRQ(void)
+{
+ struct device_node *root, *np, *mpic_node = NULL;
+ const unsigned int *opprop;
+ unsigned long openpic_addr = 0;
+ int naddr, n, i, opplen, has_isus = 0;
+ struct mpic *mpic;
+ unsigned int flags = 0;
+
+ /* Locate MPIC in the device-tree. Note that there is a bug
+ * in Maple device-tree where the type of the controller is
+ * open-pic and not interrupt-controller
+ */
+
+ for_each_node_by_type(np, "interrupt-controller")
+ if (of_device_is_compatible(np, "open-pic")) {
+ mpic_node = np;
+ break;
+ }
+ if (mpic_node == NULL)
+ for_each_node_by_type(np, "open-pic") {
+ mpic_node = np;
+ break;
+ }
+ if (mpic_node == NULL) {
+ printk(KERN_ERR
+ "Failed to locate the MPIC interrupt controller\n");
+ return;
+ }
+
+ /* Find address list in /platform-open-pic */
+ root = of_find_node_by_path("/");
+ naddr = of_n_addr_cells(root);
+ opprop = of_get_property(root, "platform-open-pic", &opplen);
+ if (opprop != 0) {
+ openpic_addr = of_read_number(opprop, naddr);
+ has_isus = (opplen > naddr);
+ printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
+ openpic_addr, has_isus);
+ }
+
+ BUG_ON(openpic_addr == 0);
+
+ /* Check for a big endian MPIC */
+ if (of_get_property(np, "big-endian", NULL) != NULL)
+ flags |= MPIC_BIG_ENDIAN;
+
+ /* XXX Maple specific bits */
+ flags |= MPIC_U3_HT_IRQS;
+ /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
+ flags |= MPIC_BIG_ENDIAN;
+
+ /* Setup the openpic driver. More device-tree junks, we hard code no
+ * ISUs for now. I'll have to revisit some stuffs with the folks doing
+ * the firmware for those
+ */
+ mpic = mpic_alloc(mpic_node, openpic_addr, flags,
+ /*has_isus ? 16 :*/ 0, 0, " MPIC ");
+ BUG_ON(mpic == NULL);
+
+ /* Add ISUs */
+ opplen /= sizeof(u32);
+ for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+ unsigned long isuaddr = of_read_number(opprop + i, naddr);
+ mpic_assign_isu(mpic, n, isuaddr);
+ }
+
+ /* All ISUs are setup, complete initialization */
+ mpic_init(mpic);
+ ppc_md.get_irq = mpic_get_irq;
+ of_node_put(mpic_node);
+ of_node_put(root);
+}
+
+static void __init maple_progress(char *s, unsigned short hex)
+{
+ printk("*** %04x : %s\n", hex, s ? s : "");
+}
+
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init maple_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
+ !of_flat_dt_is_compatible(root, "Momentum,Apache"))
+ return 0;
+ /*
+ * On U3, the DART (iommu) must be allocated now since it
+ * has an impact on htab_initialize (due to the large page it
+ * occupies having to be broken up so the DART itself is not
+ * part of the cacheable linar mapping
+ */
+ alloc_dart_table();
+
+ hpte_init_native();
+ pm_power_off = maple_power_off;
+
+ return 1;
+}
+
+define_machine(maple) {
+ .name = "Maple",
+ .probe = maple_probe,
+ .setup_arch = maple_setup_arch,
+ .init_early = maple_init_early,
+ .init_IRQ = maple_init_IRQ,
+ .pci_irq_fixup = maple_pci_irq_fixup,
+ .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
+ .restart = maple_restart,
+ .halt = maple_halt,
+ .get_boot_time = maple_get_boot_time,
+ .set_rtc_time = maple_set_rtc_time,
+ .get_rtc_time = maple_get_rtc_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = maple_progress,
+ .power_save = power4_idle,
+};
+
+#ifdef CONFIG_EDAC
+/*
+ * Register a platform device for CPC925 memory controller on
+ * all boards with U3H (CPC925) bridge.
+ */
+static int __init maple_cpc925_edac_setup(void)
+{
+ struct platform_device *pdev;
+ struct device_node *np = NULL;
+ struct resource r;
+ int ret;
+ volatile void __iomem *mem;
+ u32 rev;
+
+ np = of_find_node_by_type(NULL, "memory-controller");
+ if (!np) {
+ printk(KERN_ERR "%s: Unable to find memory-controller node\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ ret = of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: Unable to get memory-controller reg\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ mem = ioremap(r.start, resource_size(&r));
+ if (!mem) {
+ printk(KERN_ERR "%s: Unable to map memory-controller memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ rev = __raw_readl(mem);
+ iounmap(mem);
+
+ if (rev < 0x34 || rev > 0x3f) { /* U3H */
+ printk(KERN_ERR "%s: Non-CPC925(U3H) bridge revision: %02x\n",
+ __func__, rev);
+ return 0;
+ }
+
+ pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ printk(KERN_INFO "%s: CPC925 platform device created\n", __func__);
+
+ return 0;
+}
+machine_device_initcall(maple, maple_cpc925_edac_setup);
+#endif
diff --git a/kernel/arch/powerpc/platforms/maple/time.c b/kernel/arch/powerpc/platforms/maple/time.c
new file mode 100644
index 000000000..b4a369dac
--- /dev/null
+++ b/kernel/arch/powerpc/platforms/maple/time.c
@@ -0,0 +1,176 @@
+/*
+ * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
+ * IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static int maple_rtc_addr;
+
+static int maple_clock_read(int addr)
+{
+ outb_p(addr, maple_rtc_addr);
+ return inb_p(maple_rtc_addr+1);
+}
+
+static void maple_clock_write(unsigned long val, int addr)
+{
+ outb_p(addr, maple_rtc_addr);
+ outb_p(val, maple_rtc_addr+1);
+}
+
+void maple_get_rtc_time(struct rtc_time *tm)
+{
+ do {
+ tm->tm_sec = maple_clock_read(RTC_SECONDS);
+ tm->tm_min = maple_clock_read(RTC_MINUTES);
+ tm->tm_hour = maple_clock_read(RTC_HOURS);
+ tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH);
+ tm->tm_mon = maple_clock_read(RTC_MONTH);
+ tm->tm_year = maple_clock_read(RTC_YEAR);
+ } while (tm->tm_sec != maple_clock_read(RTC_SECONDS));
+
+ if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
+ || RTC_ALWAYS_BCD) {
+ tm->tm_sec = bcd2bin(tm->tm_sec);
+ tm->tm_min = bcd2bin(tm->tm_min);
+ tm->tm_hour = bcd2bin(tm->tm_hour);
+ tm->tm_mday = bcd2bin(tm->tm_mday);
+ tm->tm_mon = bcd2bin(tm->tm_mon);
+ tm->tm_year = bcd2bin(tm->tm_year);
+ }
+ if ((tm->tm_year + 1900) < 1970)
+ tm->tm_year += 100;
+
+ GregorianDay(tm);
+}
+
+int maple_set_rtc_time(struct rtc_time *tm)
+{
+ unsigned char save_control, save_freq_select;
+ int sec, min, hour, mon, mday, year;
+
+ spin_lock(&rtc_lock);
+
+ save_control = maple_clock_read(RTC_CONTROL); /* tell the clock it's being set */
+
+ maple_clock_write((save_control|RTC_SET), RTC_CONTROL);
+
+ save_freq_select = maple_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
+
+ maple_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+ sec = tm->tm_sec;
+ min = tm->tm_min;
+ hour = tm->tm_hour;
+ mon = tm->tm_mon;
+ mday = tm->tm_mday;
+ year = tm->tm_year;
+
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ sec = bin2bcd(sec);
+ min = bin2bcd(min);
+ hour = bin2bcd(hour);
+ mon = bin2bcd(mon);
+ mday = bin2bcd(mday);
+ year = bin2bcd(year);
+ }
+ maple_clock_write(sec, RTC_SECONDS);
+ maple_clock_write(min, RTC_MINUTES);
+ maple_clock_write(hour, RTC_HOURS);
+ maple_clock_write(mon, RTC_MONTH);
+ maple_clock_write(mday, RTC_DAY_OF_MONTH);
+ maple_clock_write(year, RTC_YEAR);
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ maple_clock_write(save_control, RTC_CONTROL);
+ maple_clock_write(save_freq_select, RTC_FREQ_SELECT);
+
+ spin_unlock(&rtc_lock);
+
+ return 0;
+}
+
+static struct resource rtc_iores = {
+ .name = "rtc",
+ .flags = IORESOURCE_BUSY,
+};
+
+unsigned long __init maple_get_boot_time(void)
+{
+ struct rtc_time tm;
+ struct device_node *rtcs;
+
+ rtcs = of_find_compatible_node(NULL, "rtc", "pnpPNP,b00");
+ if (rtcs) {
+ struct resource r;
+ if (of_address_to_resource(rtcs, 0, &r)) {
+ printk(KERN_EMERG "Maple: Unable to translate RTC"
+ " address\n");
+ goto bail;
+ }
+ if (!(r.flags & IORESOURCE_IO)) {
+ printk(KERN_EMERG "Maple: RTC address isn't PIO!\n");
+ goto bail;
+ }
+ maple_rtc_addr = r.start;
+ printk(KERN_INFO "Maple: Found RTC at IO 0x%x\n",
+ maple_rtc_addr);
+ }
+ bail:
+ if (maple_rtc_addr == 0) {
+ maple_rtc_addr = RTC_PORT(0); /* legacy address */
+ printk(KERN_INFO "Maple: No device node for RTC, assuming "
+ "legacy address (0x%x)\n", maple_rtc_addr);
+ }
+
+ rtc_iores.start = maple_rtc_addr;
+ rtc_iores.end = maple_rtc_addr + 7;
+ request_resource(&ioport_resource, &rtc_iores);
+
+ maple_get_rtc_time(&tm);
+ return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+