diff options
Diffstat (limited to 'kernel/arch/powerpc/platforms/chrp')
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/Kconfig | 15 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/Makefile | 3 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/chrp.h | 11 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/gg2.h | 61 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/nvram.c | 91 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/pci.c | 379 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/pegasos_eth.c | 200 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/setup.c | 608 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/smp.c | 53 | ||||
-rw-r--r-- | kernel/arch/powerpc/platforms/chrp/time.c | 158 |
10 files changed, 1579 insertions, 0 deletions
diff --git a/kernel/arch/powerpc/platforms/chrp/Kconfig b/kernel/arch/powerpc/platforms/chrp/Kconfig new file mode 100644 index 000000000..d3cdab582 --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/Kconfig @@ -0,0 +1,15 @@ +config PPC_CHRP + bool "Common Hardware Reference Platform (CHRP) based machines" + depends on 6xx + select HAVE_PCSPKR_PLATFORM + select MPIC + select PPC_I8259 + select PPC_INDIRECT_PCI + select PPC_RTAS + select PPC_RTAS_DAEMON + select RTAS_ERROR_LOGGING + select PPC_MPC106 + select PPC_UDBG_16550 + select PPC_NATIVE + select PCI + default y diff --git a/kernel/arch/powerpc/platforms/chrp/Makefile b/kernel/arch/powerpc/platforms/chrp/Makefile new file mode 100644 index 000000000..4b3bfadc7 --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/Makefile @@ -0,0 +1,3 @@ +obj-y += setup.o time.o pegasos_eth.o pci.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_NVRAM) += nvram.o diff --git a/kernel/arch/powerpc/platforms/chrp/chrp.h b/kernel/arch/powerpc/platforms/chrp/chrp.h new file mode 100644 index 000000000..63f0aee4c --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/chrp.h @@ -0,0 +1,11 @@ +/* + * Declarations of CHRP platform-specific things. + */ + +extern void chrp_nvram_init(void); +extern void chrp_get_rtc_time(struct rtc_time *); +extern int chrp_set_rtc_time(struct rtc_time *); +extern long chrp_time_init(void); + +extern void chrp_find_bridges(void); +extern void chrp_event_scan(unsigned long); diff --git a/kernel/arch/powerpc/platforms/chrp/gg2.h b/kernel/arch/powerpc/platforms/chrp/gg2.h new file mode 100644 index 000000000..341ae55b9 --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/gg2.h @@ -0,0 +1,61 @@ +/* + * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * The VAS96011/12 Chipset, Data Book, Edition 1.0 + * VLSI Technology, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_GG2_H +#define _ASMPPC_GG2_H + + /* + * Memory Map (CHRP mode) + */ + +#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */ +#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */ +#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */ +#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */ +#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */ + /* special PCI cycles */ +#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */ +#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */ + + + /* + * GG2 specific PCI Registers + */ + +extern void __iomem *gg2_pci_config_base; /* kernel virtual address */ + +#define GG2_PCI_BUSNO 0x40 /* Bus number */ +#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */ +#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */ +#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */ +#define GG2_PCI_ADDR_MAP 0x5c /* Address map */ +#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */ +#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */ +#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */ +#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */ +#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */ +#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */ +#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */ +#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */ +#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */ +#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */ +#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */ +#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */ +#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */ +#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */ +#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */ + /* Cleared when read */ + +#endif /* _ASMPPC_GG2_H */ diff --git a/kernel/arch/powerpc/platforms/chrp/nvram.c b/kernel/arch/powerpc/platforms/chrp/nvram.c new file mode 100644 index 000000000..9ef8cc337 --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/nvram.c @@ -0,0 +1,91 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * /dev/nvram driver for PPC + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <asm/uaccess.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/rtas.h> +#include "chrp.h" + +static unsigned int nvram_size; +static unsigned char nvram_buf[4]; +static DEFINE_SPINLOCK(nvram_lock); + +static unsigned char chrp_nvram_read(int addr) +{ + unsigned int done; + unsigned long flags; + unsigned char ret; + + if (addr >= nvram_size) { + printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n", + current->comm, addr, nvram_size); + return 0xff; + } + spin_lock_irqsave(&nvram_lock, flags); + if ((rtas_call(rtas_token("nvram-fetch"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) + ret = 0xff; + else + ret = nvram_buf[0]; + spin_unlock_irqrestore(&nvram_lock, flags); + + return ret; +} + +static void chrp_nvram_write(int addr, unsigned char val) +{ + unsigned int done; + unsigned long flags; + + if (addr >= nvram_size) { + printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", + current->comm, addr, nvram_size); + return; + } + spin_lock_irqsave(&nvram_lock, flags); + nvram_buf[0] = val; + if ((rtas_call(rtas_token("nvram-store"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) + printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); + spin_unlock_irqrestore(&nvram_lock, flags); +} + +void __init chrp_nvram_init(void) +{ + struct device_node *nvram; + const __be32 *nbytes_p; + unsigned int proplen; + + nvram = of_find_node_by_type(NULL, "nvram"); + if (nvram == NULL) + return; + + nbytes_p = of_get_property(nvram, "#bytes", &proplen); + if (nbytes_p == NULL || proplen != sizeof(unsigned int)) { + of_node_put(nvram); + return; + } + + nvram_size = be32_to_cpup(nbytes_p); + + printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size); + of_node_put(nvram); + + ppc_md.nvram_read_val = chrp_nvram_read; + ppc_md.nvram_write_val = chrp_nvram_write; + + return; +} diff --git a/kernel/arch/powerpc/platforms/chrp/pci.c b/kernel/arch/powerpc/platforms/chrp/pci.c new file mode 100644 index 000000000..1b87e198f --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/pci.c @@ -0,0 +1,379 @@ +/* + * CHRP pci routines. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/hydra.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/sections.h> +#include <asm/pci-bridge.h> +#include <asm/grackle.h> +#include <asm/rtas.h> + +#include "chrp.h" +#include "gg2.h" + +/* LongTrail */ +void __iomem *gg2_pci_config_base; + +/* + * The VLSI Golden Gate II has only 512K of PCI configuration space, so we + * limit the bus number to 3 bits + */ + +int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off, + int len, u32 *val) +{ + volatile void __iomem *cfg_data; + struct pci_controller *hose = pci_bus_to_host(bus); + + if (bus->number > 7) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that off is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); + switch (len) { + case 1: + *val = in_8(cfg_data); + break; + case 2: + *val = in_le16(cfg_data); + break; + default: + *val = in_le32(cfg_data); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, + int len, u32 val) +{ + volatile void __iomem *cfg_data; + struct pci_controller *hose = pci_bus_to_host(bus); + + if (bus->number > 7) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that off is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); + switch (len) { + case 1: + out_8(cfg_data, val); + break; + case 2: + out_le16(cfg_data, val); + break; + default: + out_le32(cfg_data, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops gg2_pci_ops = +{ + .read = gg2_read_config, + .write = gg2_write_config, +}; + +/* + * Access functions for PCI config space using RTAS calls. + */ +int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->global_number << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; +} + +int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->global_number << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = +{ + .read = rtas_read_config, + .write = rtas_write_config, +}; + +volatile struct Hydra __iomem *Hydra = NULL; + +int __init +hydra_init(void) +{ + struct device_node *np; + struct resource r; + + np = of_find_node_by_name(NULL, "mac-io"); + if (np == NULL || of_address_to_resource(np, 0, &r)) { + of_node_put(np); + return 0; + } + of_node_put(np); + Hydra = ioremap(r.start, resource_size(&r)); + printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start); + printk("Hydra Feature_Control was %x", + in_le32(&Hydra->Feature_Control)); + out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | + HYDRA_FC_SCSI_CELL_EN | + HYDRA_FC_SCCA_ENABLE | + HYDRA_FC_SCCB_ENABLE | + HYDRA_FC_ARB_BYPASS | + HYDRA_FC_MPIC_ENABLE | + HYDRA_FC_SLOW_SCC_PCLK | + HYDRA_FC_MPIC_IS_MASTER)); + printk(", now %x\n", in_le32(&Hydra->Feature_Control)); + return 1; +} + +#define PRG_CL_RESET_VALID 0x00010000 + +static void __init +setup_python(struct pci_controller *hose, struct device_node *dev) +{ + u32 __iomem *reg; + u32 val; + struct resource r; + + if (of_address_to_resource(dev, 0, &r)) { + printk(KERN_ERR "No address for Python PCI controller\n"); + return; + } + + /* Clear the magic go-slow bit */ + reg = ioremap(r.start + 0xf6000, 0x40); + BUG_ON(!reg); + val = in_be32(®[12]); + if (val & PRG_CL_RESET_VALID) { + out_be32(®[12], val & ~PRG_CL_RESET_VALID); + in_be32(®[12]); + } + iounmap(reg); + + setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010, 0); +} + +/* Marvell Discovery II based Pegasos 2 */ +static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) +{ + struct device_node *root = of_find_node_by_path("/"); + struct device_node *rtas; + + rtas = of_find_node_by_name (root, "rtas"); + if (rtas) { + hose->ops = &rtas_pci_ops; + of_node_put(rtas); + } else { + printk ("RTAS supporting Pegasos OF not found, please upgrade" + " your firmware\n"); + } + pci_add_flags(PCI_REASSIGN_ALL_BUS); + /* keep the reference to the root node */ +} + +void __init +chrp_find_bridges(void) +{ + struct device_node *dev; + const int *bus_range; + int len, index = -1; + struct pci_controller *hose; + const unsigned int *dma; + const char *model, *machine; + int is_longtrail = 0, is_mot = 0, is_pegasos = 0; + struct device_node *root = of_find_node_by_path("/"); + struct resource r; + /* + * The PCI host bridge nodes on some machines don't have + * properties to adequately identify them, so we have to + * look at what sort of machine this is as well. + */ + machine = of_get_property(root, "model", NULL); + if (machine != NULL) { + is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; + is_mot = strncmp(machine, "MOT", 3) == 0; + if (strncmp(machine, "Pegasos2", 8) == 0) + is_pegasos = 2; + else if (strncmp(machine, "Pegasos", 7) == 0) + is_pegasos = 1; + } + for (dev = root->child; dev != NULL; dev = dev->sibling) { + if (dev->type == NULL || strcmp(dev->type, "pci") != 0) + continue; + ++index; + /* The GG2 bridge on the LongTrail doesn't have an address */ + if (of_address_to_resource(dev, 0, &r) && !is_longtrail) { + printk(KERN_WARNING "Can't use %s: no address\n", + dev->full_name); + continue; + } + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + dev->full_name); + continue; + } + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO "PCI bus %d", bus_range[0]); + else + printk(KERN_INFO "PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s", dev->full_name); + if (!is_longtrail) + printk(" at %llx", (unsigned long long)r.start); + printk("\n"); + + hose = pcibios_alloc_controller(dev); + if (!hose) { + printk("Can't allocate PCI controller structure for %s\n", + dev->full_name); + continue; + } + hose->first_busno = hose->self_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + + model = of_get_property(dev, "model", NULL); + if (model == NULL) + model = "<none>"; + if (strncmp(model, "IBM, Python", 11) == 0) { + setup_python(hose, dev); + } else if (is_mot + || strncmp(model, "Motorola, Grackle", 17) == 0) { + setup_grackle(hose); + } else if (is_longtrail) { + void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); + hose->ops = &gg2_pci_ops; + hose->cfg_data = p; + gg2_pci_config_base = p; + } else if (is_pegasos == 1) { + setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc, 0); + } else if (is_pegasos == 2) { + setup_peg2(hose, dev); + } else if (!strncmp(model, "IBM,CPC710", 10)) { + setup_indirect_pci(hose, + r.start + 0x000f8000, + r.start + 0x000f8010, + 0); + if (index == 0) { + dma = of_get_property(dev, "system-dma-base", + &len); + if (dma && len >= sizeof(*dma)) { + dma = (unsigned int *) + (((unsigned long)dma) + + len - sizeof(*dma)); + pci_dram_offset = *dma; + } + } + } else { + printk("No methods for %s (model %s), using RTAS\n", + dev->full_name, model); + hose->ops = &rtas_pci_ops; + } + + pci_process_bridge_OF_ranges(hose, dev, index == 0); + + /* check the first bridge for a property that we can + use to set pci_dram_offset */ + dma = of_get_property(dev, "ibm,dma-ranges", &len); + if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { + pci_dram_offset = dma[2] - dma[3]; + printk("pci_dram_offset = %lx\n", pci_dram_offset); + } + } + of_node_put(root); +} + +/* SL82C105 IDE Control/Status Register */ +#define SL82C105_IDECSR 0x40 + +/* Fixup for Winbond ATA quirk, required for briq mostly because the + * 8259 is configured for level sensitive IRQ 14 and so wants the + * ATA controller to be set to fully native mode or bad things + * will happen. + */ +static void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105) +{ + u8 progif; + + /* If non-briq machines need that fixup too, please speak up */ + if (!machine_is(chrp) || _chrp_type != _CHRP_briq) + return; + + if ((sl82c105->class & 5) != 5) { + printk("W83C553: Switching SL82C105 IDE to PCI native mode\n"); + /* Enable SL82C105 PCI native IDE mode */ + pci_read_config_byte(sl82c105, PCI_CLASS_PROG, &progif); + pci_write_config_byte(sl82c105, PCI_CLASS_PROG, progif | 0x05); + sl82c105->class |= 0x05; + /* Disable SL82C105 second port */ + pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003); + /* Clear IO BARs, they will be reassigned */ + pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0); + pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0); + pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0); + pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, + chrp_pci_fixup_winbond_ata); + +/* Pegasos2 firmware version 20040810 configures the built-in IDE controller + * in legacy mode, but sets the PCI registers to PCI native mode. + * The chip can only operate in legacy mode, so force the PCI class into legacy + * mode as well. The same fixup must be done to the class-code property in + * the IDE node /pci@80000000/ide@C,1 + */ +static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide) +{ + u8 progif; + struct pci_dev *viaisa; + + if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos) + return; + if (viaide->irq != 14) + return; + + viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); + if (!viaisa) + return; + dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n"); + + pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif); + pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5); + viaide->class &= ~0x5; + + pci_dev_put(viaisa); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata); diff --git a/kernel/arch/powerpc/platforms/chrp/pegasos_eth.c b/kernel/arch/powerpc/platforms/chrp/pegasos_eth.c new file mode 100644 index 000000000..2b4dc6abd --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de> + * Thanks to : + * Dale Farnsworth <dale@farnsworth.org> + * Mark A. Greer <mgreer@mvista.com> + * Nicolas DET <nd@bplan-gmbh.de> + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * And anyone else who helped me on this. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mv643xx.h> +#include <linux/pci.h> + +#define PEGASOS2_MARVELL_REGBASE (0xf1000000) +#define PEGASOS2_MARVELL_REGSIZE (0x00004000) +#define PEGASOS2_SRAM_BASE (0xf2000000) +#define PEGASOS2_SRAM_SIZE (256*1024) + +#define PEGASOS2_SRAM_BASE_ETH_PORT0 (PEGASOS2_SRAM_BASE) +#define PEGASOS2_SRAM_BASE_ETH_PORT1 (PEGASOS2_SRAM_BASE_ETH_PORT0 + (PEGASOS2_SRAM_SIZE / 2) ) + + +#define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4) +#define PEGASOS2_SRAM_TXRING_SIZE (PEGASOS2_SRAM_SIZE/4) + +#undef BE_VERBOSE + +static struct resource mv643xx_eth_shared_resources[] = { + [0] = { + .name = "ethernet shared base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + + MV643XX_ETH_SHARED_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_shared_device = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), + .resource = mv643xx_eth_shared_resources, +}; + +/* + * The orion mdio driver only covers shared + 0x4 up to shared + 0x84 - 1 + */ +static struct resource mv643xx_eth_mvmdio_resources[] = { + [0] = { + .name = "ethernet mdio base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS + 0x4, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + 0x83, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_mvmdio_device = { + .name = "orion-mdio", + .id = -1, + .num_resources = ARRAY_SIZE(mv643xx_eth_mvmdio_resources), + .resource = mv643xx_eth_shared_resources, +}; + +static struct resource mv643xx_eth_port1_resources[] = { + [0] = { + .name = "eth port1 irq", + .start = 9, + .end = 9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv643xx_eth_platform_data eth_port1_pd = { + .shared = &mv643xx_eth_shared_device, + .port_number = 1, + .phy_addr = MV643XX_ETH_PHY_ADDR(7), + + .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1, + .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, + .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, + + .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1 + PEGASOS2_SRAM_TXRING_SIZE, + .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, + .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, +}; + +static struct platform_device eth_port1_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv643xx_eth_port1_resources), + .resource = mv643xx_eth_port1_resources, + .dev = { + .platform_data = ð_port1_pd, + }, +}; + +static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { + &mv643xx_eth_shared_device, + &mv643xx_eth_mvmdio_device, + ð_port1_device, +}; + +/***********/ +/***********/ +#define MV_READ(offset,val) { val = readl(mv643xx_reg_base + offset); } +#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset) + +static void __iomem *mv643xx_reg_base; + +static int Enable_SRAM(void) +{ + u32 ALong; + + if (mv643xx_reg_base == NULL) + mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE, + PEGASOS2_MARVELL_REGSIZE); + + if (mv643xx_reg_base == NULL) + return -ENOMEM; + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n", + (void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base); +#endif + + MV_WRITE(MV64340_SRAM_CONFIG, 0); + + MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16); + + MV_READ(MV64340_BASE_ADDR_ENABLE, ALong); + ALong &= ~(1 << 19); + MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong); + + ALong = 0x02; + ALong |= PEGASOS2_SRAM_BASE & 0xffff0000; + MV_WRITE(MV643XX_ETH_BAR_4, ALong); + + MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000); + + MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); + ALong &= ~(1 << 4); + MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: register unmapped\n"); + printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE); +#endif + + iounmap(mv643xx_reg_base); + mv643xx_reg_base = NULL; + + return 1; +} + + +/***********/ +/***********/ +static int __init mv643xx_eth_add_pds(void) +{ + int ret = 0; + static struct pci_device_id pci_marvell_mv64360[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) }, + { } + }; + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: init\n"); +#endif + + if (pci_dev_present(pci_marvell_mv64360)) { + ret = platform_add_devices(mv643xx_eth_pd_devs, + ARRAY_SIZE(mv643xx_eth_pd_devs)); + + if ( Enable_SRAM() < 0) + { + eth_port1_pd.tx_sram_addr = 0; + eth_port1_pd.tx_sram_size = 0; + eth_port1_pd.rx_sram_addr = 0; + eth_port1_pd.rx_sram_size = 0; + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: Can't enable the " + "SRAM\n"); +#endif + } + } + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: init is over\n"); +#endif + + return ret; +} + +device_initcall(mv643xx_eth_add_pds); diff --git a/kernel/arch/powerpc/platforms/chrp/setup.c b/kernel/arch/powerpc/platforms/chrp/setup.c new file mode 100644 index 000000000..15ebc4e8a --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/setup.c @@ -0,0 +1,608 @@ +/* + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + */ + +/* + * bootup setup stuff.. + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/tty.h> +#include <linux/major.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <generated/utsrelease.h> +#include <linux/adb.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/console.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/timer.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/hydra.h> +#include <asm/sections.h> +#include <asm/time.h> +#include <asm/i8259.h> +#include <asm/mpic.h> +#include <asm/rtas.h> +#include <asm/xmon.h> + +#include "chrp.h" +#include "gg2.h" + +void rtas_indicator_progress(char *, unsigned short); + +int _chrp_type; +EXPORT_SYMBOL(_chrp_type); + +static struct mpic *chrp_mpic; + +/* Used for doing CHRP event-scans */ +DEFINE_PER_CPU(struct timer_list, heartbeat_timer); +unsigned long event_scan_interval; + +extern unsigned long loops_per_jiffy; + +/* To be replaced by RTAS when available */ +static unsigned int __iomem *briq_SPOR; + +#ifdef CONFIG_SMP +extern struct smp_ops_t chrp_smp_ops; +#endif + +static const char *gg2_memtypes[4] = { + "FPM", "SDRAM", "EDO", "BEDO" +}; +static const char *gg2_cachesizes[4] = { + "256 KB", "512 KB", "1 MB", "Reserved" +}; +static const char *gg2_cachetypes[4] = { + "Asynchronous", "Reserved", "Flow-Through Synchronous", + "Pipelined Synchronous" +}; +static const char *gg2_cachemodes[4] = { + "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" +}; + +static const char *chrp_names[] = { + "Unknown", + "","","", + "Motorola", + "IBM or Longtrail", + "Genesi Pegasos", + "Total Impact Briq" +}; + +void chrp_show_cpuinfo(struct seq_file *m) +{ + int i, sdramen; + unsigned int t; + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = of_get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: CHRP %s\n", model); + + /* longtrail (goldengate) stuff */ + if (model && !strncmp(model, "IBM,LongTrail", 13)) { + /* VLSI VAS96011/12 `Golden Gate 2' */ + /* Memory banks */ + sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) + >>31) & 1; + for (i = 0; i < (sdramen ? 4 : 6); i++) { + t = in_le32(gg2_pci_config_base+ + GG2_PCI_DRAM_BANK0+ + i*4); + if (!(t & 1)) + continue; + switch ((t>>8) & 0x1f) { + case 0x1f: + model = "4 MB"; + break; + case 0x1e: + model = "8 MB"; + break; + case 0x1c: + model = "16 MB"; + break; + case 0x18: + model = "32 MB"; + break; + case 0x10: + model = "64 MB"; + break; + case 0x00: + model = "128 MB"; + break; + default: + model = "Reserved"; + break; + } + seq_printf(m, "memory bank %d\t: %s %s\n", i, model, + gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); + } + /* L2 cache */ + t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); + seq_printf(m, "board l2\t: %s %s (%s)\n", + gg2_cachesizes[(t>>7) & 3], + gg2_cachetypes[(t>>2) & 3], + gg2_cachemodes[t & 3]); + } + of_node_put(root); +} + +/* + * Fixes for the National Semiconductor PC78308VUL SuperI/O + * + * Some versions of Open Firmware incorrectly initialize the IRQ settings + * for keyboard and mouse + */ +static inline void __init sio_write(u8 val, u8 index) +{ + outb(index, 0x15c); + outb(val, 0x15d); +} + +static inline u8 __init sio_read(u8 index) +{ + outb(index, 0x15c); + return inb(0x15d); +} + +static void __init sio_fixup_irq(const char *name, u8 device, u8 level, + u8 type) +{ + u8 level0, type0, active; + + /* select logical device */ + sio_write(device, 0x07); + active = sio_read(0x30); + level0 = sio_read(0x70); + type0 = sio_read(0x71); + if (level0 != level || type0 != type || !active) { + printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " + "remapping to level %d, type %d, active\n", + name, level0, type0, !active ? "in" : "", level, type); + sio_write(0x01, 0x30); + sio_write(level, 0x70); + sio_write(type, 0x71); + } +} + +static void __init sio_init(void) +{ + struct device_node *root; + const char *model; + + root = of_find_node_by_path("/"); + if (!root) + return; + + model = of_get_property(root, "model", NULL); + if (model && !strncmp(model, "IBM,LongTrail", 13)) { + /* logical device 0 (KBC/Keyboard) */ + sio_fixup_irq("keyboard", 0, 1, 2); + /* select logical device 1 (KBC/Mouse) */ + sio_fixup_irq("mouse", 1, 12, 2); + } + + of_node_put(root); +} + + +static void __init pegasos_set_l2cr(void) +{ + struct device_node *np; + + /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ + if (_chrp_type != _CHRP_Pegasos) + return; + + /* Enable L2 cache if needed */ + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) { + const unsigned int *l2cr = of_get_property(np, "l2cr", NULL); + if (l2cr == NULL) { + printk ("Pegasos l2cr : no cpu l2cr property found\n"); + goto out; + } + if (!((*l2cr) & 0x80000000)) { + printk ("Pegasos l2cr : L2 cache was not active, " + "activating\n"); + _set_L2CR(0); + _set_L2CR((*l2cr) | 0x80000000); + } + } +out: + of_node_put(np); +} + +static void briq_restart(char *cmd) +{ + local_irq_disable(); + if (briq_SPOR) + out_be32(briq_SPOR, 0); + for(;;); +} + +/* + * Per default, input/output-device points to the keyboard/screen + * If no card is installed, the built-in serial port is used as a fallback. + * But unfortunately, the firmware does not connect /chosen/{stdin,stdout} + * the the built-in serial node. Instead, a /failsafe node is created. + */ +static __init void chrp_init_early(void) +{ + struct device_node *node; + const char *property; + + if (strstr(boot_command_line, "console=")) + return; + /* find the boot console from /chosen/stdout */ + if (!of_chosen) + return; + node = of_find_node_by_path("/"); + if (!node) + return; + property = of_get_property(node, "model", NULL); + if (!property) + goto out_put; + if (strcmp(property, "Pegasos2")) + goto out_put; + /* this is a Pegasos2 */ + property = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (!property) + goto out_put; + of_node_put(node); + node = of_find_node_by_path(property); + if (!node) + return; + property = of_get_property(node, "device_type", NULL); + if (!property) + goto out_put; + if (strcmp(property, "serial")) + goto out_put; + /* + * The 9pin connector is either /failsafe + * or /pci@80000000/isa@C/serial@i2F8 + * The optional graphics card has also type 'serial' in VGA mode. + */ + property = of_get_property(node, "name", NULL); + if (!property) + goto out_put; + if (!strcmp(property, "failsafe") || !strcmp(property, "serial")) + add_preferred_console("ttyS", 0, NULL); +out_put: + of_node_put(node); +} + +void __init chrp_setup_arch(void) +{ + struct device_node *root = of_find_node_by_path("/"); + const char *machine = NULL; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + if (root) + machine = of_get_property(root, "model", NULL); + if (machine && strncmp(machine, "Pegasos", 7) == 0) { + _chrp_type = _CHRP_Pegasos; + } else if (machine && strncmp(machine, "IBM", 3) == 0) { + _chrp_type = _CHRP_IBM; + } else if (machine && strncmp(machine, "MOT", 3) == 0) { + _chrp_type = _CHRP_Motorola; + } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) { + _chrp_type = _CHRP_briq; + /* Map the SPOR register on briq and change the restart hook */ + briq_SPOR = ioremap(0xff0000e8, 4); + ppc_md.restart = briq_restart; + } else { + /* Let's assume it is an IBM chrp if all else fails */ + _chrp_type = _CHRP_IBM; + } + of_node_put(root); + printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]); + + rtas_initialize(); + if (rtas_token("display-character") >= 0) + ppc_md.progress = rtas_progress; + + /* use RTAS time-of-day routines if available */ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + + /* On pegasos, enable the L2 cache if not already done by OF */ + pegasos_set_l2cr(); + + /* Lookup PCI host bridges */ + chrp_find_bridges(); + + /* + * Temporary fixes for PCI devices. + * -- Geert + */ + hydra_init(); /* Mac I/O */ + + /* + * Fix the Super I/O configuration + */ + sio_init(); + + pci_create_OF_bus_map(); + + /* + * Print the banner, then scroll down so boot progress + * can be printed. -- Cort + */ + if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); +} + +static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +/* + * Finds the open-pic node and sets up the mpic driver. + */ +static void __init chrp_find_openpic(void) +{ + struct device_node *np, *root; + int len, i, j; + int isu_size, idu_size; + const unsigned int *iranges, *opprop = NULL; + int oplen = 0; + unsigned long opaddr; + int na = 1; + + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + root = of_find_node_by_path("/"); + if (root) { + opprop = of_get_property(root, "platform-open-pic", &oplen); + na = of_n_addr_cells(root); + } + if (opprop && oplen >= na * sizeof(unsigned int)) { + opaddr = opprop[na-1]; /* assume 32-bit */ + oplen /= na * sizeof(unsigned int); + } else { + struct resource r; + if (of_address_to_resource(np, 0, &r)) { + goto bail; + } + opaddr = r.start; + oplen = 0; + } + + printk(KERN_INFO "OpenPIC at %lx\n", opaddr); + + iranges = of_get_property(np, "interrupt-ranges", &len); + if (iranges == NULL) + len = 0; /* non-distributed mpic */ + else + len /= 2 * sizeof(unsigned int); + + /* + * The first pair of cells in interrupt-ranges refers to the + * IDU; subsequent pairs refer to the ISUs. + */ + if (oplen < len) { + printk(KERN_ERR "Insufficient addresses for distributed" + " OpenPIC (%d < %d)\n", oplen, len); + len = oplen; + } + + isu_size = 0; + idu_size = 0; + if (len > 0 && iranges[1] != 0) { + printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", + iranges[0], iranges[0] + iranges[1] - 1); + idu_size = iranges[1]; + } + if (len > 1) + isu_size = iranges[3]; + + chrp_mpic = mpic_alloc(np, opaddr, MPIC_NO_RESET, + isu_size, 0, " MPIC "); + if (chrp_mpic == NULL) { + printk(KERN_ERR "Failed to allocate MPIC structure\n"); + goto bail; + } + j = na - 1; + for (i = 1; i < len; ++i) { + iranges += 2; + j += na; + printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", + iranges[0], iranges[0] + iranges[1] - 1, + opprop[j]); + mpic_assign_isu(chrp_mpic, i - 1, opprop[j]); + } + + mpic_init(chrp_mpic); + ppc_md.get_irq = mpic_get_irq; + bail: + of_node_put(root); + of_node_put(np); +} + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) +static struct irqaction xmon_irqaction = { + .handler = xmon_irq, + .name = "XMON break", +}; +#endif + +static void __init chrp_find_8259(void) +{ + struct device_node *np, *pic = NULL; + unsigned long chrp_int_ack = 0; + unsigned int cascade_irq; + + /* Look for cascade */ + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "chrp,iic")) { + pic = np; + break; + } + /* Ok, 8259 wasn't found. We need to handle the case where + * we have a pegasos that claims to be chrp but doesn't have + * a proper interrupt tree + */ + if (pic == NULL && chrp_mpic != NULL) { + printk(KERN_ERR "i8259: Not found in device-tree" + " assuming no legacy interrupts\n"); + return; + } + + /* Look for intack. In a perfect world, we would look for it on + * the ISA bus that holds the 8259 but heh... Works that way. If + * we ever see a problem, we can try to re-use the pSeries code here. + * Also, Pegasos-type platforms don't have a proper node to start + * from anyway + */ + for_each_node_by_name(np, "pci") { + const unsigned int *addrp = of_get_property(np, + "8259-interrupt-acknowledge", NULL); + + if (addrp == NULL) + continue; + chrp_int_ack = addrp[of_n_addr_cells(np)-1]; + break; + } + of_node_put(np); + if (np == NULL) + printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" + " address, polling\n"); + + i8259_init(pic, chrp_int_ack); + if (ppc_md.get_irq == NULL) { + ppc_md.get_irq = i8259_irq; + irq_set_default_host(i8259_get_host()); + } + if (chrp_mpic != NULL) { + cascade_irq = irq_of_parse_and_map(pic, 0); + if (cascade_irq == NO_IRQ) + printk(KERN_ERR "i8259: failed to map cascade irq\n"); + else + irq_set_chained_handler(cascade_irq, + chrp_8259_cascade); + } +} + +void __init chrp_init_IRQ(void) +{ +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) + struct device_node *kbd; +#endif + chrp_find_openpic(); + chrp_find_8259(); + +#ifdef CONFIG_SMP + /* Pegasos has no MPIC, those ops would make it crash. It might be an + * option to move setting them to after we probe the PIC though + */ + if (chrp_mpic != NULL) + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ + + if (_chrp_type == _CHRP_Pegasos) + ppc_md.get_irq = i8259_irq; + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) + /* see if there is a keyboard in the device tree + with a parent of type "adb" */ + for_each_node_by_name(kbd, "keyboard") + if (kbd->parent && kbd->parent->type + && strcmp(kbd->parent->type, "adb") == 0) + break; + of_node_put(kbd); + if (kbd) + setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); +#endif +} + +void __init +chrp_init2(void) +{ +#ifdef CONFIG_NVRAM + chrp_nvram_init(); +#endif + + request_region(0x20,0x20,"pic1"); + request_region(0xa0,0x20,"pic2"); + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); + + if (ppc_md.progress) + ppc_md.progress(" Have fun! ", 0x7777); +} + +static int __init chrp_probe(void) +{ + const char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), + "device_type", NULL); + if (dtype == NULL) + return 0; + if (strcmp(dtype, "chrp")) + return 0; + + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + pm_power_off = rtas_power_off; + + return 1; +} + +define_machine(chrp) { + .name = "CHRP", + .probe = chrp_probe, + .setup_arch = chrp_setup_arch, + .init = chrp_init2, + .init_early = chrp_init_early, + .show_cpuinfo = chrp_show_cpuinfo, + .init_IRQ = chrp_init_IRQ, + .restart = rtas_restart, + .halt = rtas_halt, + .time_init = chrp_time_init, + .set_rtc_time = chrp_set_rtc_time, + .get_rtc_time = chrp_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; diff --git a/kernel/arch/powerpc/platforms/chrp/smp.c b/kernel/arch/powerpc/platforms/chrp/smp.c new file mode 100644 index 000000000..b6c9a0dcc --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/smp.c @@ -0,0 +1,53 @@ +/* + * Smp support for CHRP machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great + * deal of code from the sparc and intel versions. + * + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + * + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/delay.h> +#include <linux/spinlock.h> + +#include <asm/ptrace.h> +#include <linux/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/machdep.h> +#include <asm/mpic.h> +#include <asm/rtas.h> + +static int smp_chrp_kick_cpu(int nr) +{ + *(unsigned long *)KERNELBASE = nr; + asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory"); + + return 0; +} + +static void smp_chrp_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); +} + +/* CHRP with openpic */ +struct smp_ops_t chrp_smp_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_mpic_probe, + .kick_cpu = smp_chrp_kick_cpu, + .setup_cpu = smp_chrp_setup_cpu, + .give_timebase = rtas_give_timebase, + .take_timebase = rtas_take_timebase, +}; diff --git a/kernel/arch/powerpc/platforms/chrp/time.c b/kernel/arch/powerpc/platforms/chrp/time.c new file mode 100644 index 000000000..f803f4b8a --- /dev/null +++ b/kernel/arch/powerpc/platforms/chrp/time.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * Adapted for PowerPC (PReP) by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu). + * Copied and modified from arch/i386/kernel/time.c + * + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/init.h> +#include <linux/bcd.h> +#include <linux/ioport.h> + +#include <asm/io.h> +#include <asm/nvram.h> +#include <asm/prom.h> +#include <asm/sections.h> +#include <asm/time.h> + +extern spinlock_t rtc_lock; + +#define NVRAM_AS0 0x74 +#define NVRAM_AS1 0x75 +#define NVRAM_DATA 0x77 + +static int nvram_as1 = NVRAM_AS1; +static int nvram_as0 = NVRAM_AS0; +static int nvram_data = NVRAM_DATA; + +long __init chrp_time_init(void) +{ + struct device_node *rtcs; + struct resource r; + int base; + + rtcs = of_find_compatible_node(NULL, "rtc", "pnpPNP,b00"); + if (rtcs == NULL) + rtcs = of_find_compatible_node(NULL, "rtc", "ds1385-rtc"); + if (rtcs == NULL) + return 0; + if (of_address_to_resource(rtcs, 0, &r)) { + of_node_put(rtcs); + return 0; + } + of_node_put(rtcs); + + base = r.start; + nvram_as1 = 0; + nvram_as0 = base; + nvram_data = base + 1; + + return 0; +} + +int chrp_cmos_clock_read(int addr) +{ + if (nvram_as1 != 0) + outb(addr>>8, nvram_as1); + outb(addr, nvram_as0); + return (inb(nvram_data)); +} + +void chrp_cmos_clock_write(unsigned long val, int addr) +{ + if (nvram_as1 != 0) + outb(addr>>8, nvram_as1); + outb(addr, nvram_as0); + outb(val, nvram_data); + return; +} + +/* + * Set the hardware clock. -- Cort + */ +int chrp_set_rtc_time(struct rtc_time *tmarg) +{ + unsigned char save_control, save_freq_select; + struct rtc_time tm = *tmarg; + + spin_lock(&rtc_lock); + + save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */ + + chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ + + chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + tm.tm_sec = bin2bcd(tm.tm_sec); + tm.tm_min = bin2bcd(tm.tm_min); + tm.tm_hour = bin2bcd(tm.tm_hour); + tm.tm_mon = bin2bcd(tm.tm_mon); + tm.tm_mday = bin2bcd(tm.tm_mday); + tm.tm_year = bin2bcd(tm.tm_year); + } + chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS); + chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES); + chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS); + chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH); + chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH); + chrp_cmos_clock_write(tm.tm_year,RTC_YEAR); + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + chrp_cmos_clock_write(save_control, RTC_CONTROL); + chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT); + + spin_unlock(&rtc_lock); + return 0; +} + +void chrp_get_rtc_time(struct rtc_time *tm) +{ + unsigned int year, mon, day, hour, min, sec; + + do { + sec = chrp_cmos_clock_read(RTC_SECONDS); + min = chrp_cmos_clock_read(RTC_MINUTES); + hour = chrp_cmos_clock_read(RTC_HOURS); + day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH); + mon = chrp_cmos_clock_read(RTC_MONTH); + year = chrp_cmos_clock_read(RTC_YEAR); + } while (sec != chrp_cmos_clock_read(RTC_SECONDS)); + + if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); + } + if (year < 70) + year += 100; + tm->tm_sec = sec; + tm->tm_min = min; + tm->tm_hour = hour; + tm->tm_mday = day; + tm->tm_mon = mon; + tm->tm_year = year; +} |