summaryrefslogtreecommitdiffstats
path: root/kernel/arch/powerpc/platforms/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/powerpc/platforms/Kconfig')
-rw-r--r--kernel/arch/powerpc/platforms/Kconfig359
1 files changed, 359 insertions, 0 deletions
diff --git a/kernel/arch/powerpc/platforms/Kconfig b/kernel/arch/powerpc/platforms/Kconfig
new file mode 100644
index 000000000..b7f9c408b
--- /dev/null
+++ b/kernel/arch/powerpc/platforms/Kconfig
@@ -0,0 +1,359 @@
+menu "Platform support"
+
+source "arch/powerpc/platforms/powernv/Kconfig"
+source "arch/powerpc/platforms/pseries/Kconfig"
+source "arch/powerpc/platforms/chrp/Kconfig"
+source "arch/powerpc/platforms/512x/Kconfig"
+source "arch/powerpc/platforms/52xx/Kconfig"
+source "arch/powerpc/platforms/powermac/Kconfig"
+source "arch/powerpc/platforms/maple/Kconfig"
+source "arch/powerpc/platforms/pasemi/Kconfig"
+source "arch/powerpc/platforms/ps3/Kconfig"
+source "arch/powerpc/platforms/cell/Kconfig"
+source "arch/powerpc/platforms/8xx/Kconfig"
+source "arch/powerpc/platforms/82xx/Kconfig"
+source "arch/powerpc/platforms/83xx/Kconfig"
+source "arch/powerpc/platforms/85xx/Kconfig"
+source "arch/powerpc/platforms/86xx/Kconfig"
+source "arch/powerpc/platforms/embedded6xx/Kconfig"
+source "arch/powerpc/platforms/44x/Kconfig"
+source "arch/powerpc/platforms/40x/Kconfig"
+source "arch/powerpc/platforms/amigaone/Kconfig"
+
+config KVM_GUEST
+ bool "KVM Guest support"
+ default n
+ select EPAPR_PARAVIRT
+ ---help---
+ This option enables various optimizations for running under the KVM
+ hypervisor. Overhead for the kernel when not running inside KVM should
+ be minimal.
+
+ In case of doubt, say Y
+
+config EPAPR_PARAVIRT
+ bool "ePAPR para-virtualization support"
+ default n
+ help
+ Enables ePAPR para-virtualization support for guests.
+
+ In case of doubt, say Y
+
+config PPC_NATIVE
+ bool
+ depends on 6xx || PPC64
+ help
+ Support for running natively on the hardware, i.e. without
+ a hypervisor. This option is not user-selectable but should
+ be selected by all platforms that need it.
+
+config PPC_OF_BOOT_TRAMPOLINE
+ bool "Support booting from Open Firmware or yaboot"
+ depends on 6xx || PPC64
+ default y
+ help
+ Support from booting from Open Firmware or yaboot using an
+ Open Firmware client interface. This enables the kernel to
+ communicate with open firmware to retrieve system information
+ such as the device tree.
+
+ In case of doubt, say Y
+
+config UDBG_RTAS_CONSOLE
+ bool "RTAS based debug console"
+ depends on PPC_RTAS
+ default n
+
+config PPC_SMP_MUXED_IPI
+ bool
+ help
+ Select this opton if your platform supports SMP and your
+ interrupt controller provides less than 4 interrupts to each
+ cpu. This will enable the generic code to multiplex the 4
+ messages on to one ipi.
+
+config IPIC
+ bool
+ default n
+
+config MPIC
+ bool
+ default n
+
+config MPIC_TIMER
+ bool "MPIC Global Timer"
+ depends on MPIC && FSL_SOC
+ default n
+ help
+ The MPIC global timer is a hardware timer inside the
+ Freescale PIC complying with OpenPIC standard. When the
+ specified interval times out, the hardware timer generates
+ an interrupt. The driver currently is only tested on fsl
+ chip, but it can potentially support other global timers
+ complying with the OpenPIC standard.
+
+config FSL_MPIC_TIMER_WAKEUP
+ tristate "Freescale MPIC global timer wakeup driver"
+ depends on FSL_SOC && MPIC_TIMER && PM
+ default n
+ help
+ The driver provides a way to wake up the system by MPIC
+ timer.
+ e.g. "echo 5 > /sys/devices/system/mpic/timer_wakeup"
+
+config PPC_EPAPR_HV_PIC
+ bool
+ default n
+ select EPAPR_PARAVIRT
+
+config MPIC_WEIRD
+ bool
+ default n
+
+config MPIC_MSGR
+ bool "MPIC message register support"
+ depends on MPIC
+ default n
+ help
+ Enables support for the MPIC message registers. These
+ registers are used for inter-processor communication.
+
+config PPC_I8259
+ bool
+ default n
+
+config U3_DART
+ bool
+ depends on PPC64
+ default n
+
+config PPC_RTAS
+ bool
+ default n
+
+config RTAS_ERROR_LOGGING
+ bool
+ depends on PPC_RTAS
+ default n
+
+config PPC_RTAS_DAEMON
+ bool
+ depends on PPC_RTAS
+ default n
+
+config RTAS_PROC
+ bool "Proc interface to RTAS"
+ depends on PPC_RTAS && PROC_FS
+ default y
+
+config RTAS_FLASH
+ tristate "Firmware flash interface"
+ depends on PPC64 && RTAS_PROC
+
+config MMIO_NVRAM
+ bool
+ default n
+
+config MPIC_U3_HT_IRQS
+ bool
+ default n
+
+config MPIC_BROKEN_REGREAD
+ bool
+ depends on MPIC
+ help
+ This option enables a MPIC driver workaround for some chips
+ that have a bug that causes some interrupt source information
+ to not read back properly. It is safe to use on other chips as
+ well, but enabling it uses about 8KB of memory to keep copies
+ of the register contents in software.
+
+config IBMVIO
+ depends on PPC_PSERIES
+ bool
+ default y
+
+config IBMEBUS
+ depends on PPC_PSERIES
+ bool "Support for GX bus based adapters"
+ help
+ Bus device driver for GX bus based adapters.
+
+config EEH
+ bool
+ depends on (PPC_POWERNV || PPC_PSERIES) && PCI
+ default y
+
+config PPC_MPC106
+ bool
+ default n
+
+config PPC_970_NAP
+ bool
+ default n
+
+config PPC_P7_NAP
+ bool
+ default n
+
+config PPC_INDIRECT_PIO
+ bool
+ select GENERIC_IOMAP
+
+config PPC_INDIRECT_MMIO
+ bool
+
+config PPC_IO_WORKAROUNDS
+ bool
+
+source "drivers/cpufreq/Kconfig"
+
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
+config PPC601_SYNC_FIX
+ bool "Workarounds for PPC601 bugs"
+ depends on 6xx && PPC_PMAC
+ help
+ Some versions of the PPC601 (the first PowerPC chip) have bugs which
+ mean that extra synchronization instructions are required near
+ certain instructions, typically those that make major changes to the
+ CPU state. These extra instructions reduce performance slightly.
+ If you say N here, these extra instructions will not be included,
+ resulting in a kernel which will run faster but may not run at all
+ on some systems with the PPC601 chip.
+
+ If in doubt, say Y here.
+
+config TAU
+ bool "On-chip CPU temperature sensor support"
+ depends on 6xx
+ help
+ G3 and G4 processors have an on-chip temperature sensor called the
+ 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+ temperature within 2-4 degrees Celsius. This option shows the current
+ on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+ Unfortunately, on some chip revisions, this sensor is very inaccurate
+ and in many cases, does not work at all, so don't assume the cpu
+ temp is actually what /proc/cpuinfo says it is.
+
+config TAU_INT
+ bool "Interrupt driven TAU driver (DANGEROUS)"
+ depends on TAU
+ ---help---
+ The TAU supports an interrupt driven mode which causes an interrupt
+ whenever the temperature goes out of range. This is the fastest way
+ to get notified the temp has exceeded a range. With this option off,
+ a timer is used to re-check the temperature periodically.
+
+ However, on some cpus it appears that the TAU interrupt hardware
+ is buggy and can cause a situation which would lead unexplained hard
+ lockups.
+
+ Unless you are extending the TAU driver, or enjoy kernel/hardware
+ debugging, leave this option off.
+
+config TAU_AVERAGE
+ bool "Average high and low temp"
+ depends on TAU
+ ---help---
+ The TAU hardware can compare the temperature to an upper and lower
+ bound. The default behavior is to show both the upper and lower
+ bound in /proc/cpuinfo. If the range is large, the temperature is
+ either changing a lot, or the TAU hardware is broken (likely on some
+ G4's). If the range is small (around 4 degrees), the temperature is
+ relatively stable. If you say Y here, a single temperature value,
+ halfway between the upper and lower bounds, will be reported in
+ /proc/cpuinfo.
+
+ If in doubt, say N here.
+
+config QUICC_ENGINE
+ bool "Freescale QUICC Engine (QE) Support"
+ depends on FSL_SOC && PPC32
+ select PPC_LIB_RHEAP
+ select CRC32
+ help
+ The QUICC Engine (QE) is a new generation of communications
+ coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+ Selecting this option means that you wish to build a kernel
+ for a machine with a QE coprocessor.
+
+config QE_GPIO
+ bool "QE GPIO support"
+ depends on QUICC_ENGINE
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here if you're going to use hardware that connects to the
+ QE GPIOs.
+
+config CPM2
+ bool "Enable support for the CPM2 (Communications Processor Module)"
+ depends on (FSL_SOC_BOOKE && PPC32) || 8260
+ select CPM
+ select PPC_LIB_RHEAP
+ select PPC_PCI_CHOICE
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ The CPM2 (Communications Processor Module) is a coprocessor on
+ embedded CPUs made by Freescale. Selecting this option means that
+ you wish to build a kernel for a machine with a CPM2 coprocessor
+ on it (826x, 827x, 8560).
+
+config AXON_RAM
+ tristate "Axon DDR2 memory device driver"
+ depends on PPC_IBM_CELL_BLADE && BLOCK
+ default m
+ help
+ It registers one block device per Axon's DDR2 memory bank found
+ on a system. Block devices are called axonram?, their major and
+ minor numbers are available in /proc/devices, /proc/partitions or
+ in /sys/block/axonram?/dev.
+
+config FSL_ULI1575
+ bool
+ default n
+ select GENERIC_ISA_DMA
+ help
+ Supports for the ULI1575 PCIe south bridge that exists on some
+ Freescale reference boards. The boards all use the ULI in pretty
+ much the same way.
+
+config CPM
+ bool
+
+config OF_RTC
+ bool
+ help
+ Uses information from the OF or flattened device tree to instantiate
+ platform devices for direct mapped RTC chips like the DS1742 or DS1743.
+
+config SIMPLE_GPIO
+ bool "Support for simple, memory-mapped GPIO controllers"
+ depends on PPC
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here to support simple, memory-mapped GPIO controllers.
+ These are usually BCSRs used to control board's switches, LEDs,
+ chip-selects, Ethernet/USB PHY's power and various other small
+ on-board peripherals.
+
+config MCU_MPC8349EMITX
+ bool "MPC8349E-mITX MCU driver"
+ depends on I2C=y && PPC_83xx
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here to enable soft power-off functionality on the Freescale
+ boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+ also register MCU GPIOs with the generic GPIO API, so you'll able
+ to use MCU pins as GPIOs.
+
+config XILINX_PCI
+ bool "Xilinx PCI host bridge support"
+ depends on PCI && XILINX_VIRTEX
+
+endmenu