1 files changed, 252 insertions, 0 deletions
diff --git a/kernel/arch/powerpc/oprofile/cell/spu_profiler.c b/kernel/arch/powerpc/oprofile/cell/spu_profiler.c
new file mode 100644
index 000000000..b129d007e
--- /dev/null
+++ b/kernel/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -0,0 +1,252 @@
+/*
+ * Cell Broadband Engine OProfile Support
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Authors: Maynard Johnson <maynardj@us.ibm.com>
+ *	    Carl Love <carll@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/hrtimer.h>
+#include <linux/smp.h>
+#include <linux/slab.h>
+#include <asm/cell-pmu.h>
+#include <asm/time.h>
+#include "pr_util.h"
+
+#define SCALE_SHIFT 14
+
+static u32 *samples;
+
+/* spu_prof_running is a flag used to indicate if spu profiling is enabled
+ * or not.  It is set by the routines start_spu_profiling_cycles() and
+ * start_spu_profiling_events().  The flag is cleared by the routines
+ * stop_spu_profiling_cycles() and stop_spu_profiling_events().  These
+ * routines are called via global_start() and global_stop() which are called in
+ * op_powerpc_start() and op_powerpc_stop().  These routines are called once
+ * per system as a result of the user starting/stopping oprofile.  Hence, only
+ * one CPU per user at a time will be changing  the value of spu_prof_running.
+ * In general, OProfile does not protect against multiple users trying to run
+ * OProfile at a time.
+ */
+int spu_prof_running;
+static unsigned int profiling_interval;
+
+#define NUM_SPU_BITS_TRBUF 16
+#define SPUS_PER_TB_ENTRY   4
+
+#define SPU_PC_MASK	     0xFFFF
+
+DEFINE_SPINLOCK(oprof_spu_smpl_arry_lck);
+unsigned long oprof_spu_smpl_arry_lck_flags;
+
+void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset)
+{
+	unsigned long ns_per_cyc;
+
+	if (!freq_khz)
+		freq_khz = ppc_proc_freq/1000;
+
+	/* To calculate a timeout in nanoseconds, the basic
+	 * formula is ns = cycles_reset * (NSEC_PER_SEC / cpu frequency).
+	 * To avoid floating point math, we use the scale math
+	 * technique as described in linux/jiffies.h.  We use
+	 * a scale factor of SCALE_SHIFT, which provides 4 decimal places
+	 * of precision.  This is close enough for the purpose at hand.
+	 *
+	 * The value of the timeout should be small enough that the hw
+	 * trace buffer will not get more than about 1/3 full for the
+	 * maximum user specified (the LFSR value) hw sampling frequency.
+	 * This is to ensure the trace buffer will never fill even if the
+	 * kernel thread scheduling varies under a heavy system load.
+	 */
+
+	ns_per_cyc = (USEC_PER_SEC << SCALE_SHIFT)/freq_khz;
+	profiling_interval = (ns_per_cyc * cycles_reset) >> SCALE_SHIFT;
+
+}
+
+/*
+ * Extract SPU PC from trace buffer entry
+ */
+static void spu_pc_extract(int cpu, int entry)
+{
+	/* the trace buffer is 128 bits */
+	u64 trace_buffer[2];
+	u64 spu_mask;
+	int spu;
+
+	spu_mask = SPU_PC_MASK;
+
+	/* Each SPU PC is 16 bits; hence, four spus in each of
+	 * the two 64-bit buffer entries that make up the
+	 * 128-bit trace_buffer entry.	Process two 64-bit values
+	 * simultaneously.
+	 * trace[0] SPU PC contents are: 0 1 2 3
+	 * trace[1] SPU PC contents are: 4 5 6 7
+	 */
+
+	cbe_read_trace_buffer(cpu, trace_buffer);
+
+	for (spu = SPUS_PER_TB_ENTRY-1; spu >= 0; spu--) {
+		/* spu PC trace entry is upper 16 bits of the
+		 * 18 bit SPU program counter
+		 */
+		samples[spu * TRACE_ARRAY_SIZE + entry]
+			= (spu_mask & trace_buffer[0]) << 2;
+		samples[(spu + SPUS_PER_TB_ENTRY) * TRACE_ARRAY_SIZE + entry]
+			= (spu_mask & trace_buffer[1]) << 2;
+
+		trace_buffer[0] = trace_buffer[0] >> NUM_SPU_BITS_TRBUF;
+		trace_buffer[1] = trace_buffer[1] >> NUM_SPU_BITS_TRBUF;
+	}
+}
+
+static int cell_spu_pc_collection(int cpu)
+{
+	u32 trace_addr;
+	int entry;
+
+	/* process the collected SPU PC for the node */
+
+	entry = 0;
+
+	trace_addr = cbe_read_pm(cpu, trace_address);
+	while (!(trace_addr & CBE_PM_TRACE_BUF_EMPTY)) {
+		/* there is data in the trace buffer to process */
+		spu_pc_extract(cpu, entry);
+
+		entry++;
+
+		if (entry >= TRACE_ARRAY_SIZE)
+			/* spu_samples is full */
+			break;
+
+		trace_addr = cbe_read_pm(cpu, trace_address);
+	}
+
+	return entry;
+}
+
+
+static enum hrtimer_restart profile_spus(struct hrtimer *timer)
+{
+	ktime_t kt;
+	int cpu, node, k, num_samples, spu_num;
+
+	if (!spu_prof_running)
+		goto stop;
+
+	for_each_online_cpu(cpu) {
+		if (cbe_get_hw_thread_id(cpu))
+			continue;
+
+		node = cbe_cpu_to_node(cpu);
+
+		/* There should only be one kernel thread at a time processing
+		 * the samples.	 In the very unlikely case that the processing
+		 * is taking a very long time and multiple kernel threads are
+		 * started to process the samples.  Make sure only one kernel
+		 * thread is working on the samples array at a time.  The
+		 * sample array must be loaded and then processed for a given
+		 * cpu.	 The sample array is not per cpu.
+		 */
+		spin_lock_irqsave(&oprof_spu_smpl_arry_lck,
+				  oprof_spu_smpl_arry_lck_flags);
+		num_samples = cell_spu_pc_collection(cpu);
+
+		if (num_samples == 0) {
+			spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
+					       oprof_spu_smpl_arry_lck_flags);
+			continue;
+		}
+
+		for (k = 0; k < SPUS_PER_NODE; k++) {
+			spu_num = k + (node * SPUS_PER_NODE);
+			spu_sync_buffer(spu_num,
+					samples + (k * TRACE_ARRAY_SIZE),
+					num_samples);
+		}
+
+		spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
+				       oprof_spu_smpl_arry_lck_flags);
+
+	}
+	smp_wmb();	/* insure spu event buffer updates are written */
+			/* don't want events intermingled... */
+
+	kt = ktime_set(0, profiling_interval);
+	if (!spu_prof_running)
+		goto stop;
+	hrtimer_forward(timer, timer->base->get_time(), kt);
+	return HRTIMER_RESTART;
+
+ stop:
+	printk(KERN_INFO "SPU_PROF: spu-prof timer ending\n");
+	return HRTIMER_NORESTART;
+}
+
+static struct hrtimer timer;
+/*
+ * Entry point for SPU cycle profiling.
+ * NOTE:  SPU profiling is done system-wide, not per-CPU.
+ *
+ * cycles_reset is the count value specified by the user when
+ * setting up OProfile to count SPU_CYCLES.
+ */
+int start_spu_profiling_cycles(unsigned int cycles_reset)
+{
+	ktime_t kt;
+
+	pr_debug("timer resolution: %lu\n", TICK_NSEC);
+	kt = ktime_set(0, profiling_interval);
+	hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	hrtimer_set_expires(&timer, kt);
+	timer.function = profile_spus;
+
+	/* Allocate arrays for collecting SPU PC samples */
+	samples = kzalloc(SPUS_PER_NODE *
+			  TRACE_ARRAY_SIZE * sizeof(u32), GFP_KERNEL);
+
+	if (!samples)
+		return -ENOMEM;
+
+	spu_prof_running = 1;
+	hrtimer_start(&timer, kt, HRTIMER_MODE_REL);
+	schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
+
+	return 0;
+}
+
+/*
+ * Entry point for SPU event profiling.
+ * NOTE:  SPU profiling is done system-wide, not per-CPU.
+ *
+ * cycles_reset is the count value specified by the user when
+ * setting up OProfile to count SPU_CYCLES.
+ */
+void start_spu_profiling_events(void)
+{
+	spu_prof_running = 1;
+	schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
+
+	return;
+}
+
+void stop_spu_profiling_cycles(void)
+{
+	spu_prof_running = 0;
+	hrtimer_cancel(&timer);
+	kfree(samples);
+	pr_debug("SPU_PROF: stop_spu_profiling_cycles issued\n");
+}
+
+void stop_spu_profiling_events(void)
+{
+	spu_prof_running = 0;
+}