diff options
Diffstat (limited to 'kernel/arch/powerpc/boot/dts/p1020utm-pc.dtsi')
-rw-r--r-- | kernel/arch/powerpc/boot/dts/p1020utm-pc.dtsi | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/kernel/arch/powerpc/boot/dts/p1020utm-pc.dtsi b/kernel/arch/powerpc/boot/dts/p1020utm-pc.dtsi deleted file mode 100644 index 7ea85eabc..000000000 --- a/kernel/arch/powerpc/boot/dts/p1020utm-pc.dtsi +++ /dev/null @@ -1,140 +0,0 @@ -/* - * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges) - * - * Copyright 2012 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -&lbc { - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x2000000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - /* 256KB for DTB Image */ - reg = <0x0 0x00040000>; - label = "NOR DTB Image"; - }; - - partition@40000 { - /* 3.75 MB for Linux Kernel Image */ - reg = <0x00040000 0x003c0000>; - label = "NOR Linux Kernel Image"; - }; - - partition@400000 { - /* 27MB for Root file System */ - reg = <0x00400000 0x01b00000>; - label = "NOR Root File System"; - }; - - partition@1f00000 { - /* This location must not be altered */ - /* 512KB for u-boot Bootloader Image */ - /* 512KB for u-boot Environment Variables */ - reg = <0x01f00000 0x00100000>; - label = "NOR U-Boot Image"; - read-only; - }; - }; -}; - -&soc { - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - - mdio@24000 { - phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupts = <2 1 0 0>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupts = <1 1 0 0>; - reg = <0x2>; - }; - }; - - mdio@25000 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26000 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@b0000 { - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - }; - - enet1: ethernet@b1000 { - phy-handle = <&phy0>; - tbi-handle = <&tbi1>; - phy-connection-type = "sgmii"; - }; - - enet2: ethernet@b2000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - usb@22000 { - phy_type = "ulpi"; - }; - - /* USB2 is shared with localbus, so it must be disabled - by default. We can't put 'status = "disabled";' here - since U-Boot doesn't clear the status property when - it enables USB2. OTOH, U-Boot does create a new node - when there isn't any. So, just comment it out. - */ - usb@23000 { - status = "disabled"; - phy_type = "ulpi"; - }; -}; |