diff options
Diffstat (limited to 'kernel/arch/mn10300/unit-asb2305/include')
| -rw-r--r-- | kernel/arch/mn10300/unit-asb2305/include/unit/clock.h | 24 | ||||
| -rw-r--r-- | kernel/arch/mn10300/unit-asb2305/include/unit/leds.h | 51 | ||||
| -rw-r--r-- | kernel/arch/mn10300/unit-asb2305/include/unit/serial.h | 125 | ||||
| -rw-r--r-- | kernel/arch/mn10300/unit-asb2305/include/unit/timex.h | 146 |
4 files changed, 346 insertions, 0 deletions
diff --git a/kernel/arch/mn10300/unit-asb2305/include/unit/clock.h b/kernel/arch/mn10300/unit-asb2305/include/unit/clock.h new file mode 100644 index 000000000..29e342543 --- /dev/null +++ b/kernel/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -0,0 +1,24 @@ +/* ASB2305-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#define MN10300_IOCLK 33333333UL +/* #define MN10300_IOBCLK 66666666UL */ + +#endif /* !__ASSEMBLY__ */ + +#define MN10300_WDCLK MN10300_IOCLK + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/kernel/arch/mn10300/unit-asb2305/include/unit/leds.h b/kernel/arch/mn10300/unit-asb2305/include/unit/leds.h new file mode 100644 index 000000000..bc471f617 --- /dev/null +++ b/kernel/arch/mn10300/unit-asb2305/include/unit/leds.h @@ -0,0 +1,51 @@ +/* ASB2305-specific LEDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include <asm/pio-regs.h> +#include <asm/cpu-regs.h> +#include <asm/exceptions.h> + +#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) + +/* perform a hard reset by driving PIO06 low */ +#define mn10300_unit_hard_reset() \ +do { \ + P0OUT &= 0xbf; \ + P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ +} while (0) + +/* + * use the 7-segment LEDs to indicate states + */ +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2305_7SEGLEDS) + +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ +do { \ + ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ +} while (0) + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_rtc(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/kernel/arch/mn10300/unit-asb2305/include/unit/serial.h b/kernel/arch/mn10300/unit-asb2305/include/unit/serial.h new file mode 100644 index 000000000..88c082193 --- /dev/null +++ b/kernel/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -0,0 +1,125 @@ +/* ASB2305-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include <asm/cpu-regs.h> +#include <proc/irq.h> +#include <linux/serial_reg.h> + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * The ASB2305 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + +/* + * dispose of the /dev/ttyS0 serial port + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2305 doesnt have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + TTYS0_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + TTYS0_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + TTYS0_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + TTYS0_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/kernel/arch/mn10300/unit-asb2305/include/unit/timex.h b/kernel/arch/mn10300/unit-asb2305/include/unit/timex.h new file mode 100644 index 000000000..4cefc224f --- /dev/null +++ b/kernel/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -0,0 +1,146 @@ +/* ASB2305-specific timer specifications + * + * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#include <asm/timer-regs.h> +#include <unit/clock.h> +#include <asm/param.h> + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffff +#define TMJCIRQ TM1IRQ +#define TMJCICR TM1ICR + +#ifndef __ASSEMBLY__ + +#define MN10300_SRC_IOCLK MN10300_IOCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ +/* use as little prescaling as possible to avoid losing accuracy */ +#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 1 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK +#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 8 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 +#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 32 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 +#else +# error You lose. +#endif + +#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) +#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + +static inline void stop_jiffies_counter(void) +{ + u16 tmp; + TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8; + tmp = TM01MD; +} + +static inline void reload_jiffies_counter(u32 cnt) +{ + u32 tmp; + + TM01BR = cnt; + tmp = TM01BR; + + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_INIT_COUNTER | \ + TM1MD_INIT_COUNTER << 8; + + + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_COUNT_ENABLE | \ + TM1MD_COUNT_ENABLE << 8; + + tmp = TM01MD; +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCBC TM45BC + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + u32 t32; + + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time + * - count down from 4Gig-1 to 0 and wrap at IOCLK rate + */ + TM45BR = TMTSCBR_MAX; + t32 = TM45BR; + + TM4MD = TSC_TIMER_CLKSRC; + TM4MD |= TM4MD_INIT_COUNTER; + TM4MD &= ~TM4MD_INIT_COUNTER; + TM4ICR = 0; + t32 = TM4ICR; + + TM5MD = TM5MD_SRC_TM4CASCADE; + TM5MD |= TM5MD_INIT_COUNTER; + TM5MD &= ~TM5MD_INIT_COUNTER; + TM5ICR = 0; + t32 = TM5ICR; + + TM5MD |= TM5MD_COUNT_ENABLE; + TM4MD |= TM4MD_COUNT_ENABLE; + t32 = TM5MD; + t32 = TM4MD; +} + +static inline void shutdown_timestamp_counter(void) +{ + u8 t8; + TM4MD = 0; + TM5MD = 0; + t8 = TM4MD; + t8 = TM5MD; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t)~TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ |