diff options
Diffstat (limited to 'kernel/arch/mips/txx9/rbtx4938')
| -rw-r--r-- | kernel/arch/mips/txx9/rbtx4938/Makefile | 1 | ||||
| -rw-r--r-- | kernel/arch/mips/txx9/rbtx4938/irq.c | 157 | ||||
| -rw-r--r-- | kernel/arch/mips/txx9/rbtx4938/prom.c | 23 | ||||
| -rw-r--r-- | kernel/arch/mips/txx9/rbtx4938/setup.c | 370 |
4 files changed, 551 insertions, 0 deletions
diff --git a/kernel/arch/mips/txx9/rbtx4938/Makefile b/kernel/arch/mips/txx9/rbtx4938/Makefile new file mode 100644 index 000000000..60b24c8f7 --- /dev/null +++ b/kernel/arch/mips/txx9/rbtx4938/Makefile @@ -0,0 +1 @@ +obj-y += prom.o setup.o irq.o diff --git a/kernel/arch/mips/txx9/rbtx4938/irq.c b/kernel/arch/mips/txx9/rbtx4938/irq.c new file mode 100644 index 000000000..58cd7a927 --- /dev/null +++ b/kernel/arch/mips/txx9/rbtx4938/irq.c @@ -0,0 +1,157 @@ +/* + * Toshiba RBTX4938 specific interrupt handlers + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ + +/* + * MIPS_CPU_IRQ_BASE+00 Software 0 + * MIPS_CPU_IRQ_BASE+01 Software 1 + * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0 + * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+07 CPU TIMER + * + * TXX9_IRQ_BASE+00 + * TXX9_IRQ_BASE+01 + * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC + * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet + * TXX9_IRQ_BASE+04 + * TXX9_IRQ_BASE+05 TX4938 ETH1 + * TXX9_IRQ_BASE+06 TX4938 ETH0 + * TXX9_IRQ_BASE+07 + * TXX9_IRQ_BASE+08 TX4938 SIO 0 + * TXX9_IRQ_BASE+09 TX4938 SIO 1 + * TXX9_IRQ_BASE+10 TX4938 DMA0 + * TXX9_IRQ_BASE+11 TX4938 DMA1 + * TXX9_IRQ_BASE+12 TX4938 DMA2 + * TXX9_IRQ_BASE+13 TX4938 DMA3 + * TXX9_IRQ_BASE+14 + * TXX9_IRQ_BASE+15 + * TXX9_IRQ_BASE+16 TX4938 PCIC + * TXX9_IRQ_BASE+17 TX4938 TMR0 + * TXX9_IRQ_BASE+18 TX4938 TMR1 + * TXX9_IRQ_BASE+19 TX4938 TMR2 + * TXX9_IRQ_BASE+20 + * TXX9_IRQ_BASE+21 + * TXX9_IRQ_BASE+22 TX4938 PCIERR + * TXX9_IRQ_BASE+23 + * TXX9_IRQ_BASE+24 + * TXX9_IRQ_BASE+25 + * TXX9_IRQ_BASE+26 + * TXX9_IRQ_BASE+27 + * TXX9_IRQ_BASE+28 + * TXX9_IRQ_BASE+29 + * TXX9_IRQ_BASE+30 + * TXX9_IRQ_BASE+31 TX4938 SPI + * + * RBTX4938_IRQ_IOC+00 PCI-D + * RBTX4938_IRQ_IOC+01 PCI-C + * RBTX4938_IRQ_IOC+02 PCI-B + * RBTX4938_IRQ_IOC+03 PCI-A + * RBTX4938_IRQ_IOC+04 RTC + * RBTX4938_IRQ_IOC+05 ATA + * RBTX4938_IRQ_IOC+06 MODEM + * RBTX4938_IRQ_IOC+07 SWINT + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/mipsregs.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/rbtx4938.h> + +static int toshiba_rbtx4938_irq_nested(int sw_irq) +{ + u8 level3; + + level3 = readb(rbtx4938_imstat_addr); + if (unlikely(!level3)) + return -1; + /* must use fls so onboard ATA has priority */ + return RBTX4938_IRQ_IOC + __fls8(level3); +} + +static void toshiba_rbtx4938_irq_ioc_enable(struct irq_data *d) +{ + unsigned char v; + + v = readb(rbtx4938_imask_addr); + v |= (1 << (d->irq - RBTX4938_IRQ_IOC)); + writeb(v, rbtx4938_imask_addr); + mmiowb(); +} + +static void toshiba_rbtx4938_irq_ioc_disable(struct irq_data *d) +{ + unsigned char v; + + v = readb(rbtx4938_imask_addr); + v &= ~(1 << (d->irq - RBTX4938_IRQ_IOC)); + writeb(v, rbtx4938_imask_addr); + mmiowb(); +} + +#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC" +static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { + .name = TOSHIBA_RBTX4938_IOC_NAME, + .irq_mask = toshiba_rbtx4938_irq_ioc_disable, + .irq_unmask = toshiba_rbtx4938_irq_ioc_enable, +}; + +static int rbtx4938_irq_dispatch(int pending) +{ + int irq; + + if (pending & STATUSF_IP7) + irq = MIPS_CPU_IRQ_BASE + 7; + else if (pending & STATUSF_IP2) { + irq = txx9_irq(); + if (irq == RBTX4938_IRQ_IOCINT) + irq = toshiba_rbtx4938_irq_nested(irq); + } else if (pending & STATUSF_IP1) + irq = MIPS_CPU_IRQ_BASE + 0; + else if (pending & STATUSF_IP0) + irq = MIPS_CPU_IRQ_BASE + 1; + else + irq = -1; + return irq; +} + +static void __init toshiba_rbtx4938_irq_ioc_init(void) +{ + int i; + + for (i = RBTX4938_IRQ_IOC; + i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++) + irq_set_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type, + handle_level_irq); + + irq_set_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq); +} + +void __init rbtx4938_irq_setup(void) +{ + txx9_irq_dispatch = rbtx4938_irq_dispatch; + /* Now, interrupt control disabled, */ + /* all IRC interrupts are masked, */ + /* all IRC interrupt mode are Low Active. */ + + /* mask all IOC interrupts */ + writeb(0, rbtx4938_imask_addr); + + /* clear SoftInt interrupts */ + writeb(0, rbtx4938_softint_addr); + tx4938_irq_init(); + toshiba_rbtx4938_irq_ioc_init(); + /* Onboard 10M Ether: High Active */ + irq_set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH); +} diff --git a/kernel/arch/mips/txx9/rbtx4938/prom.c b/kernel/arch/mips/txx9/rbtx4938/prom.c new file mode 100644 index 000000000..bcb469247 --- /dev/null +++ b/kernel/arch/mips/txx9/rbtx4938/prom.c @@ -0,0 +1,23 @@ +/* + * rbtx4938 specific prom routines + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ + +#include <linux/init.h> +#include <linux/bootmem.h> +#include <asm/bootinfo.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/rbtx4938.h> + +void __init rbtx4938_prom_init(void) +{ + add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM); + txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL); +} diff --git a/kernel/arch/mips/txx9/rbtx4938/setup.c b/kernel/arch/mips/txx9/rbtx4938/setup.c new file mode 100644 index 000000000..c9afd0502 --- /dev/null +++ b/kernel/arch/mips/txx9/rbtx4938/setup.c @@ -0,0 +1,370 @@ +/* + * Setup pointers to hardware-dependent routines. + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/mtd/physmap.h> + +#include <asm/reboot.h> +#include <asm/io.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/pci.h> +#include <asm/txx9/rbtx4938.h> +#include <linux/spi/spi.h> +#include <asm/txx9/spi.h> +#include <asm/txx9pio.h> + +static void rbtx4938_machine_restart(char *command) +{ + local_irq_disable(); + writeb(1, rbtx4938_softresetlock_addr); + writeb(1, rbtx4938_sfvol_addr); + writeb(1, rbtx4938_softreset_addr); + /* fallback */ + (*_machine_halt)(); +} + +static void __init rbtx4938_pci_setup(void) +{ +#ifdef CONFIG_PCI + int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ + + /* Reset PCI Bus */ + writeb(0, rbtx4938_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + writeb(1, rbtx4938_pcireset_addr); + iob(); + + tx4938_report_pciclk(); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { + /* Reset PCI Bus */ + writeb(0, rbtx4938_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + writeb(1, rbtx4938_pcireset_addr); + iob(); + /* Reinitialize PCIC */ + tx4938_report_pciclk(); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); + } + + if (__raw_readq(&tx4938_ccfgptr->pcfg) & + (TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) { + /* Reset PCIC1 */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); + /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ + if (!(__raw_readq(&tx4938_ccfgptr->ccfg) + & TX4938_CCFG_PCI1DMD)) + tx4938_ccfg_set(TX4938_CCFG_PCI1_66); + mdelay(10); + /* clear PCIC1 reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); + tx4938_report_pci1clk(); + + /* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */ + c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000); + register_pci_controller(c); + tx4927_pcic_setup(tx4938_pcic1ptr, c, 0); + } + tx4938_setup_pcierr_irq(); +#endif /* CONFIG_PCI */ +} + +/* SPI support */ + +/* chip select for SPI devices */ +#define SEEPROM1_CS 7 /* PIO7 */ +#define SEEPROM2_CS 0 /* IOC */ +#define SEEPROM3_CS 1 /* IOC */ +#define SRTC_CS 2 /* IOC */ +#define SPI_BUSNO 0 + +static int __init rbtx4938_ethaddr_init(void) +{ +#ifdef CONFIG_PCI + unsigned char dat[17]; + unsigned char sum; + int i; + + /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ + if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) { + printk(KERN_ERR "seeprom: read error.\n"); + return -ENODEV; + } else { + if (strcmp(dat, "MAC") != 0) + printk(KERN_WARNING "seeprom: bad signature.\n"); + for (i = 0, sum = 0; i < sizeof(dat); i++) + sum += dat[i]; + if (sum) + printk(KERN_WARNING "seeprom: bad checksum.\n"); + } + tx4938_ethaddr_init(&dat[4], &dat[4 + 6]); +#endif /* CONFIG_PCI */ + return 0; +} + +static void __init rbtx4938_spi_setup(void) +{ + /* set SPI_SEL */ + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL); +} + +static struct resource rbtx4938_fpga_resource; + +static void __init rbtx4938_time_init(void) +{ + tx4938_time_init(0); +} + +static void __init rbtx4938_mem_setup(void) +{ + unsigned long long pcfg; + + if (txx9_master_clock == 0) + txx9_master_clock = 25000000; /* 25MHz */ + + tx4938_setup(); + +#ifdef CONFIG_PCI + txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); + txx9_board_pcibios_setup = tx4927_pcibios_setup; +#else + set_io_port_base(RBTX4938_ETHER_BASE); +#endif + + tx4938_sio_init(7372800, 0); + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 + pr_info("PIOSEL: disabling both ATA and NAND selection\n"); + txx9_clear64(&tx4938_ccfgptr->pcfg, + TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND + pr_info("PIOSEL: enabling NAND selection\n"); + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA + pr_info("PIOSEL: enabling ATA selection\n"); + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); + pr_info("PIOSEL: NAND %s, ATA %s\n", + (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled", + (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled"); +#endif + + rbtx4938_spi_setup(); + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ + /* fixup piosel */ + if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == + TX4938_PCFG_ATA_SEL) + writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04, + rbtx4938_piosel_addr); + else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == + TX4938_PCFG_NDF_SEL) + writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08, + rbtx4938_piosel_addr); + else + writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04), + rbtx4938_piosel_addr); + + rbtx4938_fpga_resource.name = "FPGA Registers"; + rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); + rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; + rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource)) + printk(KERN_ERR "request resource for fpga failed\n"); + + _machine_restart = rbtx4938_machine_restart; + + writeb(0xff, rbtx4938_led_addr); + printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", + readb(rbtx4938_fpga_rev_addr), + readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); +} + +static void __init rbtx4938_ne_init(void) +{ + struct resource res[] = { + { + .start = RBTX4938_RTL_8019_BASE, + .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, { + .start = RBTX4938_RTL_8019_IRQ, + .flags = IORESOURCE_IRQ, + } + }; + platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); +} + +static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); + +static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + u8 val; + unsigned long flags; + spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); + val = readb(rbtx4938_spics_addr); + if (value) + val |= 1 << offset; + else + val &= ~(1 << offset); + writeb(val, rbtx4938_spics_addr); + mmiowb(); + spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); +} + +static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + rbtx4938_spi_gpio_set(chip, offset, value); + return 0; +} + +static struct gpio_chip rbtx4938_spi_gpio_chip = { + .set = rbtx4938_spi_gpio_set, + .direction_output = rbtx4938_spi_gpio_dir_out, + .label = "RBTX4938-SPICS", + .base = 16, + .ngpio = 3, +}; + +static int __init rbtx4938_spi_init(void) +{ + struct spi_board_info srtc_info = { + .modalias = "rtc-rs5c348", + .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ + .bus_num = 0, + .chip_select = 16 + SRTC_CS, + /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ + .mode = SPI_MODE_1 | SPI_CS_HIGH, + }; + spi_register_board_info(&srtc_info, 1); + spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128); + gpio_request(16 + SRTC_CS, "rtc-rs5c348"); + gpio_direction_output(16 + SRTC_CS, 0); + gpio_request(SEEPROM1_CS, "seeprom1"); + gpio_direction_output(SEEPROM1_CS, 1); + gpio_request(16 + SEEPROM2_CS, "seeprom2"); + gpio_direction_output(16 + SEEPROM2_CS, 1); + gpio_request(16 + SEEPROM3_CS, "seeprom3"); + gpio_direction_output(16 + SEEPROM3_CS, 1); + tx4938_spi_init(SPI_BUSNO); + return 0; +} + +static void __init rbtx4938_mtd_init(void) +{ + struct physmap_flash_data pdata = { + .width = 4, + }; + + switch (readb(rbtx4938_bdipsw_addr) & 7) { + case 0: + /* Boot */ + txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata); + /* System */ + txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata); + break; + case 1: + /* System */ + txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata); + /* Boot */ + txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata); + break; + case 2: + /* Ext */ + txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata); + /* System */ + txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata); + /* Boot */ + txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata); + break; + case 3: + /* Boot */ + txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata); + /* System */ + txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata); + break; + } +} + +static void __init rbtx4938_arch_init(void) +{ + gpiochip_add(&rbtx4938_spi_gpio_chip); + rbtx4938_pci_setup(); + rbtx4938_spi_init(); +} + +static void __init rbtx4938_device_init(void) +{ + rbtx4938_ethaddr_init(); + rbtx4938_ne_init(); + tx4938_wdt_init(); + rbtx4938_mtd_init(); + /* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */ + tx4938_ndfmc_init(10, 35); + tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1); + tx4938_dmac_init(0, 2); + tx4938_aclc_init(); + platform_device_register_simple("txx9aclc-generic", -1, NULL, 0); + tx4938_sramc_init(); + txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); +} + +struct txx9_board_vec rbtx4938_vec __initdata = { + .system = "Toshiba RBTX4938", + .prom_init = rbtx4938_prom_init, + .mem_setup = rbtx4938_mem_setup, + .irq_setup = rbtx4938_irq_setup, + .time_init = rbtx4938_time_init, + .device_init = rbtx4938_device_init, + .arch_init = rbtx4938_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4938_pci_map_irq, +#endif +}; |