diff options
Diffstat (limited to 'kernel/arch/mips/sni/time.c')
| -rw-r--r-- | kernel/arch/mips/sni/time.c | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/kernel/arch/mips/sni/time.c b/kernel/arch/mips/sni/time.c new file mode 100644 index 000000000..cf8ec568b --- /dev/null +++ b/kernel/arch/mips/sni/time.c @@ -0,0 +1,190 @@ +#include <linux/types.h> +#include <linux/i8253.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/smp.h> +#include <linux/time.h> +#include <linux/clockchips.h> + +#include <asm/sni.h> +#include <asm/time.h> +#include <asm-generic/rtc.h> + +#define SNI_CLOCK_TICK_RATE 3686400 +#define SNI_COUNTER2_DIV 64 +#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) + +static void a20r_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; + wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV; + wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8; + wmb(); + + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; + wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV; + wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8; + wmb(); + + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device a20r_clockevent_device = { + .name = "a20r-timer", + .features = CLOCK_EVT_FEAT_PERIODIC, + + /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */ + + .rating = 300, + .irq = SNI_A20R_IRQ_TIMER, + .set_mode = a20r_set_mode, +}; + +static irqreturn_t a20r_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *cd = dev_id; + + *(volatile u8 *)A20R_PT_TIM0_ACK = 0; + wmb(); + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static struct irqaction a20r_irqaction = { + .handler = a20r_interrupt, + .flags = IRQF_PERCPU | IRQF_TIMER, + .name = "a20r-timer", +}; + +/* + * a20r platform uses 2 counters to divide the input frequency. + * Counter 2 output is connected to Counter 0 & 1 input. + */ +static void __init sni_a20r_timer_setup(void) +{ + struct clock_event_device *cd = &a20r_clockevent_device; + struct irqaction *action = &a20r_irqaction; + unsigned int cpu = smp_processor_id(); + + cd->cpumask = cpumask_of(cpu); + clockevents_register_device(cd); + action->dev_id = cd; + setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction); +} + +#define SNI_8254_TICK_RATE 1193182UL + +#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255) + +static __init unsigned long dosample(void) +{ + u32 ct0, ct1; + volatile u8 msb; + + /* Start the counter. */ + outb_p(0x34, 0x43); + outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40); + outb(SNI_8254_TCSAMP_COUNTER >> 8, 0x40); + + /* Get initial counter invariant */ + ct0 = read_c0_count(); + + /* Latch and spin until top byte of counter0 is zero */ + do { + outb(0x00, 0x43); + (void) inb(0x40); + msb = inb(0x40); + ct1 = read_c0_count(); + } while (msb); + + /* Stop the counter. */ + outb(0x38, 0x43); + /* + * Return the difference, this is how far the r4k counter increments + * for every 1/HZ seconds. We round off the nearest 1 MHz of master + * clock (= 1000000 / HZ / 2). + */ + /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/ + return (ct1 - ct0) / (500000/HZ) * (500000/HZ); +} + +/* + * Here we need to calibrate the cycle counter to at least be close. + */ +void __init plat_time_init(void) +{ + unsigned long r4k_ticks[3]; + unsigned long r4k_tick; + + /* + * Figure out the r4k offset, the algorithm is very simple and works in + * _all_ cases as long as the 8254 counter register itself works ok (as + * an interrupt driving timer it does not because of bug, this is why + * we are using the onchip r4k counter/compare register to serve this + * purpose, but for r4k_offset calculation it will work ok for us). + * There are other very complicated ways of performing this calculation + * but this one works just fine so I am not going to futz around. ;-) + */ + printk(KERN_INFO "Calibrating system timer... "); + dosample(); /* Prime cache. */ + dosample(); /* Prime cache. */ + /* Zero is NOT an option. */ + do { + r4k_ticks[0] = dosample(); + } while (!r4k_ticks[0]); + do { + r4k_ticks[1] = dosample(); + } while (!r4k_ticks[1]); + + if (r4k_ticks[0] != r4k_ticks[1]) { + printk("warning: timer counts differ, retrying... "); + r4k_ticks[2] = dosample(); + if (r4k_ticks[2] == r4k_ticks[0] + || r4k_ticks[2] == r4k_ticks[1]) + r4k_tick = r4k_ticks[2]; + else { + printk("disagreement, using average... "); + r4k_tick = (r4k_ticks[0] + r4k_ticks[1] + + r4k_ticks[2]) / 3; + } + } else + r4k_tick = r4k_ticks[0]; + + printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick, + (int) (r4k_tick / (500000 / HZ)), + (int) (r4k_tick % (500000 / HZ))); + + mips_hpt_frequency = r4k_tick * HZ; + + switch (sni_brd_type) { + case SNI_BRD_10: + case SNI_BRD_10NEW: + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + sni_a20r_timer_setup(); + break; + } + setup_pit_timer(); +} + +void read_persistent_clock(struct timespec *ts) +{ + ts->tv_sec = -1; + ts->tv_nsec = 0; +} |