diff options
Diffstat (limited to 'kernel/arch/mips/sibyte/Kconfig')
| -rw-r--r-- | kernel/arch/mips/sibyte/Kconfig | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/kernel/arch/mips/sibyte/Kconfig b/kernel/arch/mips/sibyte/Kconfig new file mode 100644 index 000000000..5fbd3605d --- /dev/null +++ b/kernel/arch/mips/sibyte/Kconfig @@ -0,0 +1,171 @@ +config SIBYTE_SB1250 + bool + select CEVT_SB1250 + select CSRC_SB1250 + select HW_HAS_PCI + select IRQ_CPU + select SIBYTE_ENABLE_LDT_IF_PCI + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + select SYS_SUPPORTS_SMP + +config SIBYTE_BCM1120 + bool + select CEVT_SB1250 + select CSRC_SB1250 + select IRQ_CPU + select SIBYTE_BCM112X + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM1125 + bool + select CEVT_SB1250 + select CSRC_SB1250 + select HW_HAS_PCI + select IRQ_CPU + select SIBYTE_BCM112X + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM1125H + bool + select CEVT_SB1250 + select CSRC_SB1250 + select HW_HAS_PCI + select IRQ_CPU + select SIBYTE_BCM112X + select SIBYTE_ENABLE_LDT_IF_PCI + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM112X + bool + select CEVT_SB1250 + select CSRC_SB1250 + select IRQ_CPU + select SIBYTE_SB1xxx_SOC + select SIBYTE_HAS_ZBUS_PROFILING + +config SIBYTE_BCM1x80 + bool + select CEVT_BCM1480 + select CSRC_BCM1480 + select HW_HAS_PCI + select IRQ_CPU + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + select SYS_SUPPORTS_SMP + +config SIBYTE_BCM1x55 + bool + select CEVT_BCM1480 + select CSRC_BCM1480 + select HW_HAS_PCI + select IRQ_CPU + select SIBYTE_SB1xxx_SOC + select SIBYTE_HAS_ZBUS_PROFILING + select SYS_SUPPORTS_SMP + +config SIBYTE_SB1xxx_SOC + bool + select DMA_COHERENT + select IRQ_CPU + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select FW_CFE + select SYS_HAS_EARLY_PRINTK + +choice + prompt "SiByte SOC Stepping" + depends on SIBYTE_SB1xxx_SOC + +config CPU_SB1_PASS_1 + bool "1250 Pass1" + depends on SIBYTE_SB1250 + select CPU_HAS_PREFETCH + +config CPU_SB1_PASS_2_1250 + bool "1250 An" + depends on SIBYTE_SB1250 + select CPU_SB1_PASS_2 + help + Also called BCM1250 Pass 2 + +config CPU_SB1_PASS_2_2 + bool "1250 Bn" + depends on SIBYTE_SB1250 + select CPU_HAS_PREFETCH + help + Also called BCM1250 Pass 2.2 + +config CPU_SB1_PASS_4 + bool "1250 Cn" + depends on SIBYTE_SB1250 + select CPU_HAS_PREFETCH + help + Also called BCM1250 Pass 3 + +config CPU_SB1_PASS_2_112x + bool "112x Hybrid" + depends on SIBYTE_BCM112X + select CPU_SB1_PASS_2 + +config CPU_SB1_PASS_3 + bool "112x An" + depends on SIBYTE_BCM112X + select CPU_HAS_PREFETCH + +endchoice + +config CPU_SB1_PASS_2 + bool + +config SIBYTE_HAS_LDT + bool + +config SIBYTE_ENABLE_LDT_IF_PCI + bool + select SIBYTE_HAS_LDT if PCI + +config SB1_CEX_ALWAYS_FATAL + bool "All cache exceptions considered fatal (no recovery attempted)" + depends on SIBYTE_SB1xxx_SOC + +config SB1_CERR_STALL + bool "Stall (rather than panic) on fatal cache error" + depends on SIBYTE_SB1xxx_SOC + +config SIBYTE_CFE_CONSOLE + bool "Use firmware console" + depends on SIBYTE_SB1xxx_SOC + help + Use the CFE API's console write routines during boot. Other console + options (VT console, sb1250 duart console, etc.) should not be + configured. + +config SIBYTE_BUS_WATCHER + bool "Support for Bus Watcher statistics" + depends on SIBYTE_SB1xxx_SOC && \ + (SIBYTE_BCM112X || SIBYTE_SB1250) + help + Handle and keep statistics on the bus error interrupts (COR_ECC, + BAD_ECC, IO_BUS). + +config SIBYTE_BW_TRACE + bool "Capture bus trace before bus error" + depends on SIBYTE_BUS_WATCHER + help + Run a continuous bus trace, dumping the raw data as soon as + a ZBbus error is detected. Cannot work if ZBbus profiling + is turned on, and also will interfere with JTAG-based trace + buffer activity. Raw buffer data is dumped to console, and + must be processed off-line. + +config SIBYTE_TBPROF + tristate "Support for ZBbus profiling" + depends on SIBYTE_HAS_ZBUS_PROFILING + +config SIBYTE_HAS_ZBUS_PROFILING + bool |