diff options
Diffstat (limited to 'kernel/arch/mips/ralink/mt7620.c')
| -rw-r--r-- | kernel/arch/mips/ralink/mt7620.c | 63 |
1 files changed, 50 insertions, 13 deletions
diff --git a/kernel/arch/mips/ralink/mt7620.c b/kernel/arch/mips/ralink/mt7620.c index 2ea5ff6dc..dfb04fced 100644 --- a/kernel/arch/mips/ralink/mt7620.c +++ b/kernel/arch/mips/ralink/mt7620.c @@ -37,8 +37,17 @@ #define PMU1_CFG 0x8C #define DIG_SW_SEL BIT(25) -/* is this a MT7620 or a MT7628 */ -enum mt762x_soc_type mt762x_soc; +/* clock scaling */ +#define CLKCFG_FDIV_MASK 0x1f00 +#define CLKCFG_FDIV_USB_VAL 0x0300 +#define CLKCFG_FFRAC_MASK 0x001f +#define CLKCFG_FFRAC_USB_VAL 0x0003 + +/* EFUSE bits */ +#define EFUSE_MT7688 0x100000 + +/* DRAM type bit */ +#define DRAM_TYPE_MT7628_MASK 0x1 /* does the board have sdram or ddram */ static int dram_type; @@ -227,6 +236,12 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = { { 0 } }; +static inline int is_mt76x8(void) +{ + return ralink_soc == MT762X_SOC_MT7628AN || + ralink_soc == MT762X_SOC_MT7688; +} + static __init u32 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) { @@ -381,7 +396,7 @@ void __init ralink_clk_init(void) #define RINT(x) ((x) / 1000000) #define RFRAC(x) (((x) / 1000) % 1000) - if (mt762x_soc == MT762X_SOC_MT7628AN) { + if (is_mt76x8()) { if (xtal_rate == MHZ(40)) cpu_rate = MHZ(580); else @@ -423,6 +438,20 @@ void __init ralink_clk_init(void) ralink_clk_add("10000b00.spi", sys_rate); ralink_clk_add("10000c00.uartlite", periph_rate); ralink_clk_add("10180000.wmac", xtal_rate); + + if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) { + /* + * When the CPU goes into sleep mode, the BUS clock will be + * too low for USB to function properly. Adjust the busses + * fractional divider to fix this + */ + u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); + + val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); + val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; + + rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); + } } void __init ralink_of_remap(void) @@ -499,20 +528,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info) if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { if (bga) { - mt762x_soc = MT762X_SOC_MT7620A; + ralink_soc = MT762X_SOC_MT7620A; name = "MT7620A"; soc_info->compatible = "ralink,mt7620a-soc"; } else { - mt762x_soc = MT762X_SOC_MT7620N; + ralink_soc = MT762X_SOC_MT7620N; name = "MT7620N"; soc_info->compatible = "ralink,mt7620n-soc"; -#ifdef CONFIG_PCI - panic("mt7620n is only supported for non pci kernels"); -#endif } } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { - mt762x_soc = MT762X_SOC_MT7628AN; - name = "MT7628AN"; + u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG); + + if (efuse & EFUSE_MT7688) { + ralink_soc = MT762X_SOC_MT7688; + name = "MT7688"; + } else { + ralink_soc = MT762X_SOC_MT7628AN; + name = "MT7628AN"; + } soc_info->compatible = "ralink,mt7628an-soc"; } else { panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); @@ -525,10 +558,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info) (rev & CHIP_REV_ECO_MASK)); cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); - dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; + if (is_mt76x8()) + dram_type = cfg0 & DRAM_TYPE_MT7628_MASK; + else + dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & + SYSCFG0_DRAM_TYPE_MASK; soc_info->mem_base = MT7620_DRAM_BASE; - if (mt762x_soc == MT762X_SOC_MT7628AN) + if (is_mt76x8()) mt7628_dram_init(soc_info); else mt7620_dram_init(soc_info); @@ -541,7 +578,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info) pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); - if (mt762x_soc == MT762X_SOC_MT7628AN) + if (is_mt76x8()) rt2880_pinmux_data = mt7628an_pinmux_data; else rt2880_pinmux_data = mt7620a_pinmux_data; |