summaryrefslogtreecommitdiffstats
path: root/kernel/arch/mips/pci/pci-bcm1480.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/mips/pci/pci-bcm1480.c')
-rw-r--r--kernel/arch/mips/pci/pci-bcm1480.c268
1 files changed, 268 insertions, 0 deletions
diff --git a/kernel/arch/mips/pci/pci-bcm1480.c b/kernel/arch/mips/pci/pci-bcm1480.c
new file mode 100644
index 000000000..f97e16939
--- /dev/null
+++ b/kernel/arch/mips/pci/pci-bcm1480.c
@@ -0,0 +1,268 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1x80/1x55-specific PCI support
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/vt.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus, devfn, where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus, devfn, where) CFGOFFSET((bus)->number, (devfn), where)
+
+static void *cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480_bus_status;
+
+#define PCI_BRIDGE_DEVICE 0
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(cfg_space + (addr & ~3)) = data;
+}
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (pin == 0)
+ return -1;
+
+ return K_BCM1480_INT_PCI_INTA - 1 + pin;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ else
+ return 1;
+ } else
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480_pci_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480_pci_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops bcm1480_pci_ops = {
+ .read = bcm1480_pcibios_read,
+ .write = bcm1480_pcibios_write,
+};
+
+static struct resource bcm1480_mem_resource = {
+ .name = "BCM1480 PCI MEM",
+ .start = A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES,
+ .end = A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES + 0xfffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480_io_resource = {
+ .name = "BCM1480 PCI I/O",
+ .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+ .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480_controller = {
+ .pci_ops = &bcm1480_pci_ops,
+ .mem_resource = &bcm1480_mem_resource,
+ .io_resource = &bcm1480_io_resource,
+ .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+};
+
+
+static int __init bcm1480_pcibios_init(void)
+{
+ uint32_t cmdreg;
+ uint64_t reg;
+
+ /* CFE will assign PCI resources */
+ pci_set_flags(PCI_PROBE_ONLY);
+
+ /* Avoid ISA compat ranges. */
+ PCIBIOS_MIN_IO = 0x00008000UL;
+ PCIBIOS_MIN_MEM = 0x01000000UL;
+
+ /* Set I/O resource limits. - unlimited for now to accommodate HT */
+ ioport_resource.end = 0xffffffffUL;
+ iomem_resource.end = 0xffffffffUL;
+
+ cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
+ if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
+ bcm1480_bus_status |= PCI_DEVICE_MODE;
+ } else {
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk
+ ("PCI: Skipping PCI probe. Bus is not initialized.\n");
+ iounmap(cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480_bus_status |= PCI_BUS_ENABLED;
+ }
+
+ /* turn on ExpMemEn */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
+ cmdreg | 0x10);
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+
+ /*
+ * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
+ * space. Use "match bytes" policy to make everything look
+ * little-endian. So, you need to also set
+ * CONFIG_SWAP_IO_SPACE, but this is the combination that
+ * works correctly with most of Linux's drivers.
+ * XXX ehs: Should this happen in PCI Device mode?
+ */
+
+ bcm1480_controller.io_map_base = (unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
+ bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
+ set_io_port_base(bcm1480_controller.io_map_base);
+
+ register_pci_controller(&bcm1480_controller);
+
+#ifdef CONFIG_VGA_CONSOLE
+ console_lock();
+ do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
+ console_unlock();
+#endif
+ return 0;
+}
+
+arch_initcall(bcm1480_pcibios_init);