summaryrefslogtreecommitdiffstats
path: root/kernel/arch/mips/pci/ops-sni.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/mips/pci/ops-sni.c')
-rw-r--r--kernel/arch/mips/pci/ops-sni.c164
1 files changed, 164 insertions, 0 deletions
diff --git a/kernel/arch/mips/pci/ops-sni.c b/kernel/arch/mips/pci/ops-sni.c
new file mode 100644
index 000000000..35daa7fe6
--- /dev/null
+++ b/kernel/arch/mips/pci/ops-sni.c
@@ -0,0 +1,164 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SNI specific PCI support for RM200/RM300.
+ *
+ * Copyright (C) 1997 - 2000, 2003 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <asm/sni.h>
+
+/*
+ * It seems that on the RM200 only lower 3 bits of the 5 bit PCI device
+ * address are decoded. We therefore manually have to reject attempts at
+ * reading outside this range. Being on the paranoid side we only do this
+ * test for bus 0 and hope forwarding and decoding work properly for any
+ * subordinated busses.
+ *
+ * ASIC PCI only supports type 1 config cycles.
+ */
+static int set_config_address(unsigned int busno, unsigned int devfn, int reg)
+{
+ if ((devfn > 255) || (reg > 255))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (busno == 0 && devfn >= PCI_DEVFN(8, 0))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ *(volatile u32 *)PCIMT_CONFIG_ADDRESS =
+ ((busno & 0xff) << 16) |
+ ((devfn & 0xff) << 8) |
+ (reg & 0xfc);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcimt_read(struct pci_bus *bus, unsigned int devfn, int reg,
+ int size, u32 * val)
+{
+ int res;
+
+ if ((res = set_config_address(bus->number, devfn, reg)))
+ return res;
+
+ switch (size) {
+ case 1:
+ *val = inb(PCIMT_CONFIG_DATA + (reg & 3));
+ break;
+ case 2:
+ *val = inw(PCIMT_CONFIG_DATA + (reg & 2));
+ break;
+ case 4:
+ *val = inl(PCIMT_CONFIG_DATA);
+ break;
+ }
+
+ return 0;
+}
+
+static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg,
+ int size, u32 val)
+{
+ int res;
+
+ if ((res = set_config_address(bus->number, devfn, reg)))
+ return res;
+
+ switch (size) {
+ case 1:
+ outb(val, PCIMT_CONFIG_DATA + (reg & 3));
+ break;
+ case 2:
+ outw(val, PCIMT_CONFIG_DATA + (reg & 2));
+ break;
+ case 4:
+ outl(val, PCIMT_CONFIG_DATA);
+ break;
+ }
+
+ return 0;
+}
+
+struct pci_ops sni_pcimt_ops = {
+ .read = pcimt_read,
+ .write = pcimt_write,
+};
+
+static int pcit_set_config_address(unsigned int busno, unsigned int devfn, int reg)
+{
+ if ((devfn > 255) || (reg > 255) || (busno > 255))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ outl((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcit_read(struct pci_bus *bus, unsigned int devfn, int reg,
+ int size, u32 * val)
+{
+ int res;
+
+ /*
+ * on bus 0 we need to check, whether there is a device answering
+ * for the devfn by doing a config write and checking the result. If
+ * we don't do it, we will get a data bus error
+ */
+ if (bus->number == 0) {
+ pcit_set_config_address(0, 0, 0x68);
+ outl(inl(0xcfc) | 0xc0000000, 0xcfc);
+ if ((res = pcit_set_config_address(0, devfn, 0)))
+ return res;
+ outl(0xffffffff, 0xcfc);
+ pcit_set_config_address(0, 0, 0x68);
+ if (inl(0xcfc) & 0x100000)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ if ((res = pcit_set_config_address(bus->number, devfn, reg)))
+ return res;
+
+ switch (size) {
+ case 1:
+ *val = inb(PCIMT_CONFIG_DATA + (reg & 3));
+ break;
+ case 2:
+ *val = inw(PCIMT_CONFIG_DATA + (reg & 2));
+ break;
+ case 4:
+ *val = inl(PCIMT_CONFIG_DATA);
+ break;
+ }
+ return 0;
+}
+
+static int pcit_write(struct pci_bus *bus, unsigned int devfn, int reg,
+ int size, u32 val)
+{
+ int res;
+
+ if ((res = pcit_set_config_address(bus->number, devfn, reg)))
+ return res;
+
+ switch (size) {
+ case 1:
+ outb(val, PCIMT_CONFIG_DATA + (reg & 3));
+ break;
+ case 2:
+ outw(val, PCIMT_CONFIG_DATA + (reg & 2));
+ break;
+ case 4:
+ outl(val, PCIMT_CONFIG_DATA);
+ break;
+ }
+
+ return 0;
+}
+
+
+struct pci_ops sni_pcit_ops = {
+ .read = pcit_read,
+ .write = pcit_write,
+};