diff options
Diffstat (limited to 'kernel/arch/mips/loongson')
49 files changed, 0 insertions, 5582 deletions
diff --git a/kernel/arch/mips/loongson/Kconfig b/kernel/arch/mips/loongson/Kconfig deleted file mode 100644 index 156de85b8..000000000 --- a/kernel/arch/mips/loongson/Kconfig +++ /dev/null @@ -1,158 +0,0 @@ -if MACH_LOONGSON - -choice - prompt "Machine Type" - -config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HW_HAS_PCI - select I8259 - select ISA - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - select LOONGSON_MC146818 - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge - - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. - -config LEMOTE_MACH2F - bool "Lemote Loongson 2F family machines" - select ARCH_SPARSEMEM_ENABLE - select BOARD_SCACHE - select BOOT_ELF32 - select CEVT_R4K if ! MIPS_EXTERNAL_TIMER - select CPU_HAS_WB - select CS5536 - select CSRC_R4K if ! MIPS_EXTERNAL_TIMER - select DMA_NONCOHERENT - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select HAVE_CLK - select HW_HAS_PCI - select I8259 - select IRQ_CPU - select ISA - select SYS_HAS_CPU_LOONGSON2F - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - help - Lemote Loongson 2F family machines utilize the 2F revision of - Loongson processor and the AMD CS5536 south bridge. - - These family machines include fuloong2f mini PC, yeeloong2f notebook, - LingLoong allinone PC and so forth. - -config LOONGSON_MACH3X - bool "Generic Loongson 3 family machines" - select ARCH_SPARSEMEM_ENABLE - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select BOOT_ELF32 - select BOARD_SCACHE - select CSRC_R4K - select CEVT_R4K - select CPU_HAS_WB - select HW_HAS_PCI - select ISA - select HT_PCI - select I8259 - select IRQ_CPU - select NR_CPUS_DEFAULT_4 - select SYS_HAS_CPU_LOONGSON3 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_SMP - select SYS_SUPPORTS_HOTPLUG_CPU - select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - select ZONE_DMA32 - select LEFI_FIRMWARE_INTERFACE - select PHYS48_TO_HT40 - help - Generic Loongson 3 family machines utilize the 3A/3B revision - of Loongson processor and RS780/SBX00 chipset. -endchoice - -config CS5536 - bool - -config CS5536_MFGPT - bool "CS5536 MFGPT Timer" - depends on CS5536 && !HIGH_RES_TIMERS - select MIPS_EXTERNAL_TIMER - help - This option enables the mfgpt0 timer of AMD CS5536. With this timer - switched on you can not use high resolution timers. - - If you want to enable the Loongson2 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - -config RS780_HPET - bool "RS780/SBX00 HPET Timer" - depends on LOONGSON_MACH3X - select MIPS_EXTERNAL_TIMER - help - This option enables the hpet timer of AMD RS780/SBX00. - - If you want to enable the Loongson3 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - -config LOONGSON_SUSPEND - bool - default y - depends on CPU_SUPPORTS_CPUFREQ && SUSPEND - -config LOONGSON_UART_BASE - bool - default y - depends on EARLY_PRINTK || SERIAL_8250 - -config IOMMU_HELPER - bool - -config NEED_SG_DMA_LENGTH - bool - -config SWIOTLB - bool "Soft IOMMU Support for All-Memory DMA" - default y - depends on CPU_LOONGSON3 - select IOMMU_HELPER - select NEED_SG_DMA_LENGTH - select NEED_DMA_MAP_STATE - -config PHYS48_TO_HT40 - bool - default y if CPU_LOONGSON3 - -config LOONGSON_MC146818 - bool - default n - -config LEFI_FIRMWARE_INTERFACE - bool - -endif # MACH_LOONGSON diff --git a/kernel/arch/mips/loongson/Makefile b/kernel/arch/mips/loongson/Makefile deleted file mode 100644 index 7429994e7..000000000 --- a/kernel/arch/mips/loongson/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# -# Common code for all Loongson based systems -# - -obj-$(CONFIG_MACH_LOONGSON) += common/ - -# -# Lemote Fuloong mini-PC (Loongson 2E-based) -# - -obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ - -# -# Lemote loongson2f family machines -# - -obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ - -# -# All Loongson-3 family machines -# - -obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/ diff --git a/kernel/arch/mips/loongson/Platform b/kernel/arch/mips/loongson/Platform deleted file mode 100644 index 0ac20eb84..000000000 --- a/kernel/arch/mips/loongson/Platform +++ /dev/null @@ -1,33 +0,0 @@ -# -# Loongson Processors' Support -# - -# Only gcc >= 4.4 have Loongson specific support -cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2E) += \ - $(call cc-option,-march=loongson2e,-march=r4600) -cflags-$(CONFIG_CPU_LOONGSON2F) += \ - $(call cc-option,-march=loongson2f,-march=r4600) -# Enable the workarounds for Loongson2f -ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) - else - cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop - endif - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) - else - cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump - endif -endif - -# -# Loongson Machines' Support -# - -platform-$(CONFIG_MACH_LOONGSON) += loongson/ -cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely -load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 -load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 -load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000 diff --git a/kernel/arch/mips/loongson/common/Makefile b/kernel/arch/mips/loongson/common/Makefile deleted file mode 100644 index f2e8153e4..000000000 --- a/kernel/arch/mips/loongson/common/Makefile +++ /dev/null @@ -1,31 +0,0 @@ -# -# Makefile for loongson based machines. -# - -obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - bonito-irq.o mem.o machtype.o platform.o serial.o -obj-$(CONFIG_PCI) += pci.o - -# -# Serial port support -# -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o -obj-$(CONFIG_LOONGSON_MC146818) += rtc.o - -# -# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure -# space -# -obj-$(CONFIG_CS5536) += cs5536/ - -# -# Suspend Support -# - -obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o - -# -# Big Memory (SWIOTLB) Support -# -obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o diff --git a/kernel/arch/mips/loongson/common/bonito-irq.c b/kernel/arch/mips/loongson/common/bonito-irq.c deleted file mode 100644 index cc0e4fd54..000000000 --- a/kernel/arch/mips/loongson/common/bonito-irq.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) - * - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/interrupt.h> -#include <linux/compiler.h> - -#include <loongson.h> - -static inline void bonito_irq_enable(struct irq_data *d) -{ - LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE)); - mmiowb(); -} - -static inline void bonito_irq_disable(struct irq_data *d) -{ - LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE)); - mmiowb(); -} - -static struct irq_chip bonito_irq_type = { - .name = "bonito_irq", - .irq_mask = bonito_irq_disable, - .irq_unmask = bonito_irq_enable, -}; - -static struct irqaction __maybe_unused dma_timeout_irqaction = { - .handler = no_action, - .name = "dma_timeout", -}; - -void bonito_irq_init(void) -{ - u32 i; - - for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) - irq_set_chip_and_handler(i, &bonito_irq_type, - handle_level_irq); - -#ifdef CONFIG_CPU_LOONGSON2E - setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); -#endif -} diff --git a/kernel/arch/mips/loongson/common/cmdline.c b/kernel/arch/mips/loongson/common/cmdline.c deleted file mode 100644 index 72fed003a..000000000 --- a/kernel/arch/mips/loongson/common/cmdline.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2003 ICT CAS - * Author: Michael Guo <guoyi@ict.ac.cn> - * - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/bootinfo.h> - -#include <loongson.h> - -void __init prom_init_cmdline(void) -{ - int prom_argc; - /* pmon passes arguments in 32bit pointers */ - int *_prom_argv; - int i; - long l; - - /* firmware arguments are initialized in head.S */ - prom_argc = fw_arg0; - _prom_argv = (int *)fw_arg1; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < prom_argc; i++) { - l = (long)_prom_argv[i]; - if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, ((char *)l)); - strcat(arcs_cmdline, " "); - } - - prom_init_machtype(); -} diff --git a/kernel/arch/mips/loongson/common/cs5536/Makefile b/kernel/arch/mips/loongson/common/cs5536/Makefile deleted file mode 100644 index f12e64007..000000000 --- a/kernel/arch/mips/loongson/common/cs5536/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for CS5536 support. -# - -obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ - cs5536_isa.o cs5536_ehci.o - -# -# Enable cs5536 mfgpt Timer -# -obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o diff --git a/kernel/arch/mips/loongson/common/cs5536/cs5536_acc.c b/kernel/arch/mips/loongson/common/cs5536/cs5536_acc.c deleted file mode 100644 index ab4d6cc57..000000000 --- a/kernel/arch/mips/loongson/common/cs5536/cs5536_acc.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * the ACC Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -void pci_acc_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - lo |= (0x03 << 8); - else - lo &= ~(0x03 << 8); - _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_ACC_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - value &= 0xfffffffc; - hi = 0xA0000000 | ((value & 0x000ff000) >> 12); - lo = 0x000fff80 | ((value & 0x00000fff) << 20); - _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo); - } - break; - case PCI_ACC_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - /* disable all the usb interrupt in PIC */ - lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); - if (value) /* enable all the acc interrupt in PIC */ - lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); - break; - default: - break; - } -} - -u32 pci_acc_read_reg(int reg) -{ - u32 hi, lo; - u32 conf_data = 0; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); - if (((lo & 0xfff00000) || (hi & 0x000000ff)) - && ((hi & 0xf0000000) == 0xa0000000)) - conf_data |= PCI_COMMAND_IO; - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if ((lo & 0x300) == 0x300) - conf_data |= PCI_COMMAND_MASTER; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_ACC_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_ACC_FLAG) { - conf_data = CS5536_ACC_RANGE | - PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~SOFT_BAR_ACC_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); - conf_data = (hi & 0x000000ff) << 12; - conf_data |= (lo & 0xfff00000) >> 20; - conf_data |= 0x01; - conf_data &= ~0x02; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); - break; - default: - break; - } - - return conf_data; -} diff --git a/kernel/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/kernel/arch/mips/loongson/common/cs5536/cs5536_ehci.c deleted file mode 100644 index ec2e36026..000000000 --- a/kernel/arch/mips/loongson/common/cs5536/cs5536_ehci.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * the EHCI Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -void pci_ehci_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - hi |= PCI_COMMAND_MASTER; - else - hi &= ~PCI_COMMAND_MASTER; - - if (value & PCI_COMMAND_MEMORY) - hi |= PCI_COMMAND_MEMORY; - else - hi &= ~PCI_COMMAND_MEMORY; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_EHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if ((value & 0x01) == 0x00) { - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - lo = value; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - - value &= 0xfffffff0; - hi = 0x40000000 | ((value & 0xff000000) >> 24); - lo = 0x000fffff | ((value & 0x00fff000) << 8); - _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo); - } - break; - case PCI_EHCI_LEGSMIEN_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - hi &= 0x003f0000; - hi |= (value & 0x3f) << 16; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - case PCI_EHCI_FLADJ_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - hi &= ~0x00003f00; - hi |= value & 0x00003f00; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - default: - break; - } -} - -u32 pci_ehci_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - if (hi & PCI_COMMAND_MASTER) - conf_data |= PCI_COMMAND_MASTER; - if (hi & PCI_COMMAND_MEMORY) - conf_data |= PCI_COMMAND_MEMORY; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_EHCI_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_EHCI_FLAG) { - conf_data = CS5536_EHCI_RANGE | - PCI_BASE_ADDRESS_SPACE_MEMORY; - lo &= ~SOFT_BAR_EHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = lo & 0xfffff000; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); - break; - case PCI_EHCI_LEGSMIEN_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = (hi & 0x003f0000) >> 16; - break; - case PCI_EHCI_LEGSMISTS_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = (hi & 0x3f000000) >> 24; - break; - case PCI_EHCI_FLADJ_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = hi & 0x00003f00; - break; - default: - break; - } - - return conf_data; -} diff --git a/kernel/arch/mips/loongson/common/cs5536/cs5536_ide.c b/kernel/arch/mips/loongson/common/cs5536/cs5536_ide.c deleted file mode 100644 index a73414d9e..000000000 --- a/kernel/arch/mips/loongson/common/cs5536/cs5536_ide.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * the IDE Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -void pci_ide_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - lo |= (0x03 << 4); - else - lo &= ~(0x03 << 4); - _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_CACHE_LINE_SIZE: - value &= 0x0000ff00; - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0xffffff00; - hi |= (value >> 8); - _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); - break; - case PCI_BAR4_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_IDE_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - lo = (value & 0xfffffff0) | 0x1; - _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo); - - value &= 0xfffffffc; - hi = 0x60000000 | ((value & 0x000ff000) >> 12); - lo = 0x000ffff0 | ((value & 0x00000fff) << 20); - _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo); - } - break; - case PCI_IDE_CFG_REG: - if (value == CS5536_IDE_FLASH_SIGNATURE) { - _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo); - lo |= 0x01; - _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo); - } else { - _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); - } - break; - case PCI_IDE_DTC_REG: - _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); - break; - case PCI_IDE_CAST_REG: - _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); - break; - case PCI_IDE_ETC_REG: - _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); - break; - case PCI_IDE_PM_REG: - _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); - break; - default: - break; - } -} - -u32 pci_ide_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - if (lo & 0xfffffff0) - conf_data |= PCI_COMMAND_IO; - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if ((lo & 0x30) == 0x30) - conf_data |= PCI_COMMAND_MASTER; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_IDE_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0x000000f8; - conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); - break; - case PCI_BAR4_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_IDE_FLAG) { - conf_data = CS5536_IDE_RANGE | - PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~SOFT_BAR_IDE_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - conf_data = lo & 0xfffffff0; - conf_data |= 0x01; - conf_data &= ~0x02; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); - break; - case PCI_IDE_CFG_REG: - _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_DTC_REG: - _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_CAST_REG: - _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_ETC_REG: - _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_PM_REG: - _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); - conf_data = lo; - break; - default: - break; - } - - return conf_data; -} diff --git a/kernel/arch/mips/loongson/common/cs5536/cs5536_isa.c b/kernel/arch/mips/loongson/common/cs5536/cs5536_isa.c deleted file mode 100644 index 924be39e7..000000000 --- a/kernel/arch/mips/loongson/common/cs5536/cs5536_isa.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * the ISA Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/pci.h> -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -/* common variables for PCI_ISA_READ/WRITE_BAR */ -static const u32 divil_msr_reg[6] = { - DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), - DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), - DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), -}; - -static const u32 soft_bar_flag[6] = { - SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, - SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, -}; - -static const u32 sb_msr_reg[6] = { - SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), - SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), -}; - -static const u32 bar_space_range[6] = { - CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, - CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, -}; - -static const int bar_space_len[6] = { - CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, - CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, -}; - -/* - * enable the divil module bar space. - * - * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg - * and the RCONFx(0~5) reg to use the modules. - */ -static void divil_lbar_enable(void) -{ - u32 hi, lo; - int offset; - - /* - * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. - */ - - for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { - _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); - hi |= 0x01; - _wrmsr(DIVIL_MSR_REG(offset), hi, lo); - } -} - -/* - * disable the divil module bar space. - */ -static void divil_lbar_disable(void) -{ - u32 hi, lo; - int offset; - - for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { - _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); - hi &= ~0x01; - _wrmsr(DIVIL_MSR_REG(offset), hi, lo); - } -} - -/* - * BAR write: write value to the n BAR - */ - -void pci_isa_write_bar(int n, u32 value) -{ - u32 hi = 0, lo = value; - - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= soft_bar_flag[n]; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - /* NATIVE reg */ - hi = 0x0000f001; - lo &= bar_space_range[n]; - _wrmsr(divil_msr_reg[n], hi, lo); - - /* RCONFx is 4bytes in units for I/O space */ - hi = ((value & 0x000ffffc) << 12) | - ((bar_space_len[n] - 4) << 12) | 0x01; - lo = ((value & 0x000ffffc) << 12) | 0x01; - _wrmsr(sb_msr_reg[n], hi, lo); - } -} - -/* - * BAR read: read the n BAR - */ - -u32 pci_isa_read_bar(int n) -{ - u32 conf_data = 0; - u32 hi, lo; - - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & soft_bar_flag[n]) { - conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~soft_bar_flag[n]; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(divil_msr_reg[n], &hi, &lo); - conf_data = lo & bar_space_range[n]; - conf_data |= 0x01; - conf_data &= ~0x02; - } - return conf_data; -} - -/* - * isa_write: ISA write transfer - * - * We assume that this is not a bus master transfer. - */ -void pci_isa_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - u32 temp; - - switch (reg) { - case PCI_COMMAND: - if (value & PCI_COMMAND_IO) - divil_lbar_enable(); - else - divil_lbar_disable(); - break; - case PCI_STATUS: - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - temp = lo & 0x0000ffff; - if ((value & PCI_STATUS_SIG_TARGET_ABORT) && - (lo & SB_TAS_ERR_EN)) - temp |= SB_TAS_ERR_FLAG; - - if ((value & PCI_STATUS_REC_TARGET_ABORT) && - (lo & SB_TAR_ERR_EN)) - temp |= SB_TAR_ERR_FLAG; - - if ((value & PCI_STATUS_REC_MASTER_ABORT) - && (lo & SB_MAR_ERR_EN)) - temp |= SB_MAR_ERR_FLAG; - - if ((value & PCI_STATUS_DETECTED_PARITY) - && (lo & SB_PARE_ERR_EN)) - temp |= SB_PARE_ERR_FLAG; - - lo = temp; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - break; - case PCI_CACHE_LINE_SIZE: - value &= 0x0000ff00; - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0xffffff00; - hi |= (value >> 8); - _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); - break; - case PCI_BAR0_REG: - pci_isa_write_bar(0, value); - break; - case PCI_BAR1_REG: - pci_isa_write_bar(1, value); - break; - case PCI_BAR2_REG: - pci_isa_write_bar(2, value); - break; - case PCI_BAR3_REG: - pci_isa_write_bar(3, value); - break; - case PCI_BAR4_REG: - pci_isa_write_bar(4, value); - break; - case PCI_BAR5_REG: - pci_isa_write_bar(5, value); - break; - case PCI_UART1_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); - /* disable uart1 interrupt in PIC */ - lo &= ~(0xf << 24); - if (value) /* enable uart1 interrupt in PIC */ - lo |= (CS5536_UART1_INTR << 24); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); - break; - case PCI_UART2_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); - /* disable uart2 interrupt in PIC */ - lo &= ~(0xf << 28); - if (value) /* enable uart2 interrupt in PIC */ - lo |= (CS5536_UART2_INTR << 28); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); - break; - case PCI_ISA_FIXUP_REG: - if (value) { - /* enable the TARGET ABORT/MASTER ABORT etc. */ - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - lo |= 0x00000063; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - - default: - /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ - break; - } -} - -/* - * isa_read: ISA read transfers - * - * We assume that this is not a bus master transfer. - */ -u32 pci_isa_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - /* we just check the first LBAR for the IO enable bit, */ - /* maybe we should changed later. */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); - if (hi & 0x01) - conf_data |= PCI_COMMAND_IO; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - conf_data |= PCI_STATUS_FAST_BACK; - - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_TAS_ERR_FLAG) - conf_data |= PCI_STATUS_SIG_TARGET_ABORT; - if (lo & SB_TAR_ERR_FLAG) - conf_data |= PCI_STATUS_REC_TARGET_ABORT; - if (lo & SB_MAR_ERR_FLAG) - conf_data |= PCI_STATUS_REC_MASTER_ABORT; - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_DETECTED_PARITY; - break; - case PCI_CLASS_REVISION: - _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_ISA_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0x000000f8; - conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); - break; - /* - * we only use the LBAR of DIVIL, no RCONF used. - * all of them are IO space. - */ - case PCI_BAR0_REG: - return pci_isa_read_bar(0); - break; - case PCI_BAR1_REG: - return pci_isa_read_bar(1); - break; - case PCI_BAR2_REG: - return pci_isa_read_bar(2); - break; - case PCI_BAR3_REG: - break; - case PCI_BAR4_REG: - return pci_isa_read_bar(4); - break; - case PCI_BAR5_REG: - return pci_isa_read_bar(5); - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_POINTER; - break; - case PCI_INTERRUPT_LINE: - /* no interrupt used here */ - conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); - break; - default: - break; - } - - return conf_data; -} - -/* - * The mfgpt timer interrupt is running early, so we must keep the south bridge - * mmio always enabled. Otherwise we may race with the PCI configuration which - * may temporarily disable it. When that happens and the timer interrupt fires, - * we are not able to clear it and the system will hang. - */ -static void cs5536_isa_mmio_always_on(struct pci_dev *dev) -{ - dev->mmio_always_on = 1; -} -DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, - PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on); diff --git a/kernel/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/kernel/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c deleted file mode 100644 index 12c75db23..000000000 --- a/kernel/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * CS5536 General timer functions - * - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Yanhua, yanh@lemote.com - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu zhangjin, wuzhangjin@gmail.com - * - * Reference: AMD Geode(TM) CS5536 Companion Device Data Book - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/io.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/jiffies.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/clockchips.h> - -#include <asm/time.h> - -#include <cs5536/cs5536_mfgpt.h> - -static DEFINE_RAW_SPINLOCK(mfgpt_lock); - -static u32 mfgpt_base; - -/* - * Initialize the MFGPT timer. - * - * This is also called after resume to bring the MFGPT into operation again. - */ - -/* disable counter */ -void disable_mfgpt0_counter(void) -{ - outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); -} -EXPORT_SYMBOL(disable_mfgpt0_counter); - -/* enable counter, comparator2 to event mode, 14.318MHz clock */ -void enable_mfgpt0_counter(void) -{ - outw(0xe310, MFGPT0_SETUP); -} -EXPORT_SYMBOL(enable_mfgpt0_counter); - -static void init_mfgpt_timer(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - raw_spin_lock(&mfgpt_lock); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ - outw(0, MFGPT0_CNT); /* set counter to 0 */ - enable_mfgpt0_counter(); - break; - - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - if (evt->mode == CLOCK_EVT_MODE_PERIODIC || - evt->mode == CLOCK_EVT_MODE_ONESHOT) - disable_mfgpt0_counter(); - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* The oneshot mode have very high deviation, Not use it! */ - break; - - case CLOCK_EVT_MODE_RESUME: - /* Nothing to do here */ - break; - } - raw_spin_unlock(&mfgpt_lock); -} - -static struct clock_event_device mfgpt_clockevent = { - .name = "mfgpt", - .features = CLOCK_EVT_FEAT_PERIODIC, - .set_mode = init_mfgpt_timer, - .irq = CS5536_MFGPT_INTR, -}; - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - u32 basehi; - - /* - * get MFGPT base address - * - * NOTE: do not remove me, it's need for the value of mfgpt_base is - * variable - */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); - - /* ack */ - outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); - - mfgpt_clockevent.event_handler(&mfgpt_clockevent); - - return IRQ_HANDLED; -} - -static struct irqaction irq5 = { - .handler = timer_interrupt, - .flags = IRQF_NOBALANCING | IRQF_TIMER, - .name = "timer" -}; - -/* - * Initialize the conversion factor and the min/max deltas of the clock event - * structure and register the clock event source with the framework. - */ -void __init setup_mfgpt0_timer(void) -{ - u32 basehi; - struct clock_event_device *cd = &mfgpt_clockevent; - unsigned int cpu = smp_processor_id(); - - cd->cpumask = cpumask_of(cpu); - clockevent_set_clock(cd, MFGPT_TICK_RATE); - cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); - cd->min_delta_ns = clockevent_delta2ns(0xf, cd); - - /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ - _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); - - /* Enable Interrupt Gate 5 */ - _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); - - /* get MFGPT base address */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); - - clockevents_register_device(cd); - - setup_irq(CS5536_MFGPT_INTR, &irq5); -} - -/* - * Since the MFGPT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static cycle_t mfgpt_read(struct clocksource *cs) -{ - unsigned long flags; - int count; - u32 jifs; - static int old_count; - static u32 old_jifs; - - raw_spin_lock_irqsave(&mfgpt_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - /* read the count */ - count = inw(MFGPT0_CNT); - - /* - * It's possible for count to appear to go the wrong way for this - * reason: - * - * The timer counter underflows, but we haven't handled the resulting - * interrupt and incremented jiffies yet. - * - * Previous attempts to handle these cases intelligently were buggy, so - * we just do the simple thing now. - */ - if (count < old_count && jifs == old_jifs) - count = old_count; - - old_count = count; - old_jifs = jifs; - - raw_spin_unlock_irqrestore(&mfgpt_lock, flags); - - return (cycle_t) (jifs * COMPARE) + count; -} - -static struct clocksource clocksource_mfgpt = { - .name = "mfgpt", - .rating = 120, /* Functional for real use, but not desired */ - .read = mfgpt_read, - .mask = CLOCKSOURCE_MASK(32), -}; - -int __init init_mfgpt_clocksource(void) -{ - if (num_possible_cpus() > 1) /* MFGPT does not scale! */ - return 0; - - return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE); -} - -arch_initcall(init_mfgpt_clocksource); diff --git a/kernel/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/kernel/arch/mips/loongson/common/cs5536/cs5536_ohci.c deleted file mode 100644 index f7c905e50..000000000 --- a/kernel/arch/mips/loongson/common/cs5536/cs5536_ohci.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * the OHCI Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -void pci_ohci_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - hi |= PCI_COMMAND_MASTER; - else - hi &= ~PCI_COMMAND_MASTER; - - if (value & PCI_COMMAND_MEMORY) - hi |= PCI_COMMAND_MEMORY; - else - hi &= ~PCI_COMMAND_MEMORY; - _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_OHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if ((value & 0x01) == 0x00) { - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - lo = value; - _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); - - value &= 0xfffffff0; - hi = 0x40000000 | ((value & 0xff000000) >> 24); - lo = 0x000fffff | ((value & 0x00fff000) << 8); - _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo); - } - break; - case PCI_OHCI_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT); - if (value) /* enable all the usb interrupt in PIC */ - lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); - break; - default: - break; - } -} - -u32 pci_ohci_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - if (hi & PCI_COMMAND_MASTER) - conf_data |= PCI_COMMAND_MASTER; - if (hi & PCI_COMMAND_MEMORY) - conf_data |= PCI_COMMAND_MEMORY; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_OHCI_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_OHCI_FLAG) { - conf_data = CS5536_OHCI_RANGE | - PCI_BASE_ADDRESS_SPACE_MEMORY; - lo &= ~SOFT_BAR_OHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - conf_data = lo & 0xffffff00; - conf_data &= ~0x0000000f; /* 32bit mem */ - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); - break; - case PCI_OHCI_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - if ((lo & 0x00000f00) == CS5536_USB_INTR) - conf_data = 1; - break; - default: - break; - } - - return conf_data; -} diff --git a/kernel/arch/mips/loongson/common/cs5536/cs5536_pci.c b/kernel/arch/mips/loongson/common/cs5536/cs5536_pci.c deleted file mode 100644 index b73972320..000000000 --- a/kernel/arch/mips/loongson/common/cs5536/cs5536_pci.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * read/write operation to the PCI config space of CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * the Virtual Support Module(VSM) for virtulizing the PCI - * configure space are defined in cs5536_modulename.c respectively, - * - * after this virtulizing, user can access the PCI configure space - * directly as a normal multi-function PCI device which follows - * the PCI-2.2 spec. - */ - -#include <linux/types.h> -#include <cs5536/cs5536_pci.h> -#include <cs5536/cs5536_vsm.h> - -enum { - CS5536_FUNC_START = -1, - CS5536_ISA_FUNC, - reserved_func, - CS5536_IDE_FUNC, - CS5536_ACC_FUNC, - CS5536_OHCI_FUNC, - CS5536_EHCI_FUNC, - CS5536_FUNC_END, -}; - -static const cs5536_pci_vsm_write vsm_conf_write[] = { - [CS5536_ISA_FUNC] = pci_isa_write_reg, - [reserved_func] = NULL, - [CS5536_IDE_FUNC] = pci_ide_write_reg, - [CS5536_ACC_FUNC] = pci_acc_write_reg, - [CS5536_OHCI_FUNC] = pci_ohci_write_reg, - [CS5536_EHCI_FUNC] = pci_ehci_write_reg, -}; - -static const cs5536_pci_vsm_read vsm_conf_read[] = { - [CS5536_ISA_FUNC] = pci_isa_read_reg, - [reserved_func] = NULL, - [CS5536_IDE_FUNC] = pci_ide_read_reg, - [CS5536_ACC_FUNC] = pci_acc_read_reg, - [CS5536_OHCI_FUNC] = pci_ohci_read_reg, - [CS5536_EHCI_FUNC] = pci_ehci_read_reg, -}; - -/* - * write to PCI config space and transfer it to MSR write. - */ -void cs5536_pci_conf_write4(int function, int reg, u32 value) -{ - if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) - return; - if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0)) - return; - - if (vsm_conf_write[function] != NULL) - vsm_conf_write[function](reg, value); -} - -/* - * read PCI config space and transfer it to MSR access. - */ -u32 cs5536_pci_conf_read4(int function, int reg) -{ - u32 data = 0; - - if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) - return 0; - if ((reg < 0) || ((reg & 0x03) != 0)) - return 0; - if (reg > 0x100) - return 0xffffffff; - - if (vsm_conf_read[function] != NULL) - data = vsm_conf_read[function](reg); - - return data; -} diff --git a/kernel/arch/mips/loongson/common/dma-swiotlb.c b/kernel/arch/mips/loongson/common/dma-swiotlb.c deleted file mode 100644 index 2c6b989c1..000000000 --- a/kernel/arch/mips/loongson/common/dma-swiotlb.c +++ /dev/null @@ -1,150 +0,0 @@ -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/dma-mapping.h> -#include <linux/scatterlist.h> -#include <linux/swiotlb.h> -#include <linux/bootmem.h> - -#include <asm/bootinfo.h> -#include <boot_param.h> -#include <dma-coherence.h> - -static void *loongson_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs) -{ - void *ret; - - if (dma_alloc_from_coherent(dev, size, dma_handle, &ret)) - return ret; - - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM); - -#ifdef CONFIG_ISA - if (dev == NULL) - gfp |= __GFP_DMA; - else -#endif -#ifdef CONFIG_ZONE_DMA - if (dev->coherent_dma_mask < DMA_BIT_MASK(32)) - gfp |= __GFP_DMA; - else -#endif -#ifdef CONFIG_ZONE_DMA32 - if (dev->coherent_dma_mask < DMA_BIT_MASK(40)) - gfp |= __GFP_DMA32; - else -#endif - ; - gfp |= __GFP_NORETRY; - - ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp); - mb(); - return ret; -} - -static void loongson_dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs) -{ - int order = get_order(size); - - if (dma_release_from_coherent(dev, order, vaddr)) - return; - - swiotlb_free_coherent(dev, size, vaddr, dma_handle); -} - -static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir, - struct dma_attrs *attrs) -{ - dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size, - dir, attrs); - mb(); - return daddr; -} - -static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, - struct dma_attrs *attrs) -{ - int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL); - mb(); - - return r; -} - -static void loongson_dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) -{ - swiotlb_sync_single_for_device(dev, dma_handle, size, dir); - mb(); -} - -static void loongson_dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - swiotlb_sync_sg_for_device(dev, sg, nents, dir); - mb(); -} - -static int loongson_dma_set_mask(struct device *dev, u64 mask) -{ - if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits)) { - *dev->dma_mask = DMA_BIT_MASK(loongson_sysconf.dma_mask_bits); - return -EIO; - } - - *dev->dma_mask = mask; - - return 0; -} - -dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - long nid; -#ifdef CONFIG_PHYS48_TO_HT40 - /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from - * Loongson-3's 48bit address space and embed it into 40bit */ - nid = (paddr >> 44) & 0x3; - paddr = ((nid << 44) ^ paddr) | (nid << 37); -#endif - return paddr; -} - -phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) -{ - long nid; -#ifdef CONFIG_PHYS48_TO_HT40 - /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from - * Loongson-3's 48bit address space and embed it into 40bit */ - nid = (daddr >> 37) & 0x3; - daddr = ((nid << 37) ^ daddr) | (nid << 44); -#endif - return daddr; -} - -static struct dma_map_ops loongson_dma_map_ops = { - .alloc = loongson_dma_alloc_coherent, - .free = loongson_dma_free_coherent, - .map_page = loongson_dma_map_page, - .unmap_page = swiotlb_unmap_page, - .map_sg = loongson_dma_map_sg, - .unmap_sg = swiotlb_unmap_sg_attrs, - .sync_single_for_cpu = swiotlb_sync_single_for_cpu, - .sync_single_for_device = loongson_dma_sync_single_for_device, - .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = loongson_dma_sync_sg_for_device, - .mapping_error = swiotlb_dma_mapping_error, - .dma_supported = swiotlb_dma_supported, - .set_dma_mask = loongson_dma_set_mask -}; - -void __init plat_swiotlb_setup(void) -{ - swiotlb_init(1); - mips_dma_map_ops = &loongson_dma_map_ops; -} diff --git a/kernel/arch/mips/loongson/common/early_printk.c b/kernel/arch/mips/loongson/common/early_printk.c deleted file mode 100644 index 6ca632e52..000000000 --- a/kernel/arch/mips/loongson/common/early_printk.c +++ /dev/null @@ -1,41 +0,0 @@ -/* early printk support - * - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * Copyright (c) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/serial_reg.h> - -#include <loongson.h> - -#define PORT(base, offset) (u8 *)(base + offset) - -static inline unsigned int serial_in(unsigned char *base, int offset) -{ - return readb(PORT(base, offset)); -} - -static inline void serial_out(unsigned char *base, int offset, int value) -{ - writeb(value, PORT(base, offset)); -} - -void prom_putchar(char c) -{ - int timeout; - unsigned char *uart_base; - - uart_base = (unsigned char *)_loongson_uart_base[0]; - timeout = 1024; - - while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && - (timeout-- > 0)) - ; - - serial_out(uart_base, UART_TX, c); -} diff --git a/kernel/arch/mips/loongson/common/env.c b/kernel/arch/mips/loongson/common/env.c deleted file mode 100644 index 22f04ca2f..000000000 --- a/kernel/arch/mips/loongson/common/env.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2003 ICT CAS - * Author: Michael Guo <guoyi@ict.ac.cn> - * - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/module.h> -#include <asm/bootinfo.h> -#include <loongson.h> -#include <boot_param.h> -#include <workarounds.h> - -u32 cpu_clock_freq; -EXPORT_SYMBOL(cpu_clock_freq); -struct efi_memory_map_loongson *loongson_memmap; -struct loongson_system_configuration loongson_sysconf; - -u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180}; -u64 loongson_chiptemp[MAX_PACKAGES]; -u64 loongson_freqctrl[MAX_PACKAGES]; - -unsigned long long smp_group[4]; - -#define parse_even_earlier(res, option, p) \ -do { \ - unsigned int tmp __maybe_unused; \ - \ - if (strncmp(option, (char *)p, strlen(option)) == 0) \ - tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \ -} while (0) - -void __init prom_init_env(void) -{ - /* pmon passes arguments in 32bit pointers */ - unsigned int processor_id; - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - int *_prom_envp; - long l; - - /* firmware arguments are initialized in head.S */ - _prom_envp = (int *)fw_arg2; - - l = (long)*_prom_envp; - while (l != 0) { - parse_even_earlier(cpu_clock_freq, "cpuclock", l); - parse_even_earlier(memsize, "memsize", l); - parse_even_earlier(highmemsize, "highmemsize", l); - _prom_envp++; - l = (long)*_prom_envp; - } - if (memsize == 0) - memsize = 256; - pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); -#else - struct boot_params *boot_p; - struct loongson_params *loongson_p; - struct system_loongson *esys; - struct efi_cpuinfo_loongson *ecpu; - struct irq_source_routing_table *eirq_source; - - /* firmware arguments are initialized in head.S */ - boot_p = (struct boot_params *)fw_arg2; - loongson_p = &(boot_p->efi.smbios.lp); - - esys = (struct system_loongson *) - ((u64)loongson_p + loongson_p->system_offset); - ecpu = (struct efi_cpuinfo_loongson *) - ((u64)loongson_p + loongson_p->cpu_offset); - eirq_source = (struct irq_source_routing_table *) - ((u64)loongson_p + loongson_p->irq_offset); - loongson_memmap = (struct efi_memory_map_loongson *) - ((u64)loongson_p + loongson_p->memory_offset); - - cpu_clock_freq = ecpu->cpu_clock_freq; - loongson_sysconf.cputype = ecpu->cputype; - if (ecpu->cputype == Loongson_3A) { - loongson_sysconf.cores_per_node = 4; - loongson_sysconf.cores_per_package = 4; - smp_group[0] = 0x900000003ff01000; - smp_group[1] = 0x900010003ff01000; - smp_group[2] = 0x900020003ff01000; - smp_group[3] = 0x900030003ff01000; - loongson_chipcfg[0] = 0x900000001fe00180; - loongson_chipcfg[1] = 0x900010001fe00180; - loongson_chipcfg[2] = 0x900020001fe00180; - loongson_chipcfg[3] = 0x900030001fe00180; - loongson_chiptemp[0] = 0x900000001fe0019c; - loongson_chiptemp[1] = 0x900010001fe0019c; - loongson_chiptemp[2] = 0x900020001fe0019c; - loongson_chiptemp[3] = 0x900030001fe0019c; - loongson_sysconf.ht_control_base = 0x90000EFDFB000000; - loongson_sysconf.workarounds = WORKAROUND_CPUFREQ; - } else if (ecpu->cputype == Loongson_3B) { - loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */ - loongson_sysconf.cores_per_package = 8; - smp_group[0] = 0x900000003ff01000; - smp_group[1] = 0x900010003ff05000; - smp_group[2] = 0x900020003ff09000; - smp_group[3] = 0x900030003ff0d000; - loongson_chipcfg[0] = 0x900000001fe00180; - loongson_chipcfg[1] = 0x900020001fe00180; - loongson_chipcfg[2] = 0x900040001fe00180; - loongson_chipcfg[3] = 0x900060001fe00180; - loongson_chiptemp[0] = 0x900000001fe0019c; - loongson_chiptemp[1] = 0x900020001fe0019c; - loongson_chiptemp[2] = 0x900040001fe0019c; - loongson_chiptemp[3] = 0x900060001fe0019c; - loongson_freqctrl[0] = 0x900000001fe001d0; - loongson_freqctrl[1] = 0x900020001fe001d0; - loongson_freqctrl[2] = 0x900040001fe001d0; - loongson_freqctrl[3] = 0x900060001fe001d0; - loongson_sysconf.ht_control_base = 0x90001EFDFB000000; - loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG; - } else { - loongson_sysconf.cores_per_node = 1; - loongson_sysconf.cores_per_package = 1; - loongson_chipcfg[0] = 0x900000001fe00180; - } - - loongson_sysconf.nr_cpus = ecpu->nr_cpus; - loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id; - loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask; - if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0) - loongson_sysconf.nr_cpus = NR_CPUS; - loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus + - loongson_sysconf.cores_per_node - 1) / - loongson_sysconf.cores_per_node; - - loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr; - loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr; - loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr; - loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits; - if (loongson_sysconf.dma_mask_bits < 32 || - loongson_sysconf.dma_mask_bits > 64) - loongson_sysconf.dma_mask_bits = 32; - - loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm; - loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown; - loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend; - - loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios; - pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n", - loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr, - loongson_sysconf.vgabios_addr); - - memset(loongson_sysconf.ecname, 0, 32); - if (esys->has_ec) - memcpy(loongson_sysconf.ecname, esys->ec_name, 32); - loongson_sysconf.workarounds |= esys->workarounds; - - loongson_sysconf.nr_uarts = esys->nr_uarts; - if (esys->nr_uarts < 1 || esys->nr_uarts > MAX_UARTS) - loongson_sysconf.nr_uarts = 1; - memcpy(loongson_sysconf.uarts, esys->uarts, - sizeof(struct uart_device) * loongson_sysconf.nr_uarts); - - loongson_sysconf.nr_sensors = esys->nr_sensors; - if (loongson_sysconf.nr_sensors > MAX_SENSORS) - loongson_sysconf.nr_sensors = 0; - if (loongson_sysconf.nr_sensors) - memcpy(loongson_sysconf.sensors, esys->sensors, - sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); -#endif - if (cpu_clock_freq == 0) { - processor_id = (¤t_cpu_data)->processor_id; - switch (processor_id & PRID_REV_MASK) { - case PRID_REV_LOONGSON2E: - cpu_clock_freq = 533080000; - break; - case PRID_REV_LOONGSON2F: - cpu_clock_freq = 797000000; - break; - case PRID_REV_LOONGSON3A: - cpu_clock_freq = 900000000; - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - cpu_clock_freq = 1000000000; - break; - default: - cpu_clock_freq = 100000000; - break; - } - } - pr_info("CpuClock = %u\n", cpu_clock_freq); -} diff --git a/kernel/arch/mips/loongson/common/init.c b/kernel/arch/mips/loongson/common/init.c deleted file mode 100644 index 9b987fe98..000000000 --- a/kernel/arch/mips/loongson/common/init.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/bootmem.h> -#include <asm/bootinfo.h> -#include <asm/smp-ops.h> - -#include <loongson.h> - -/* Loongson CPU address windows config space base address */ -unsigned long __maybe_unused _loongson_addrwincfg_base; - -void __init prom_init(void) -{ -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - _loongson_addrwincfg_base = (unsigned long) - ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); -#endif - - prom_init_cmdline(); - prom_init_env(); - - /* init base address of io space */ - set_io_port_base((unsigned long) - ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); - -#ifdef CONFIG_NUMA - prom_init_numa_memory(); -#else - prom_init_memory(); -#endif - - /*init the uart base address */ - prom_init_uart_base(); - register_smp_ops(&loongson3_smp_ops); -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/kernel/arch/mips/loongson/common/irq.c b/kernel/arch/mips/loongson/common/irq.c deleted file mode 100644 index 687003b19..000000000 --- a/kernel/arch/mips/loongson/common/irq.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/delay.h> -#include <linux/interrupt.h> - -#include <loongson.h> -/* - * the first level int-handler will jump here if it is a bonito irq - */ -void bonito_irqdispatch(void) -{ - u32 int_status; - int i; - - /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = LOONGSON_INTISR; - while (int_status & (1 << 10)) { - udelay(1); - int_status = LOONGSON_INTISR; - } - - /* Get pending sources, masked by current enables */ - int_status = LOONGSON_INTISR & LOONGSON_INTEN; - - if (int_status) { - i = __ffs(int_status); - do_IRQ(LOONGSON_IRQ_BASE + i); - } -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending; - - pending = read_c0_cause() & read_c0_status() & ST0_IM; - - /* machine-specific plat_irq_dispatch */ - mach_irq_dispatch(pending); -} - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM | ST0_BEV); - - /* no steer */ - LOONGSON_INTSTEER = 0; - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - LOONGSON_INTENCLR = ~0; - - /* machine specific irq init */ - mach_init_irq(); -} diff --git a/kernel/arch/mips/loongson/common/machtype.c b/kernel/arch/mips/loongson/common/machtype.c deleted file mode 100644 index f2807bc66..000000000 --- a/kernel/arch/mips/loongson/common/machtype.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/errno.h> -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -/* please ensure the length of the machtype string is less than 50 */ -#define MACHTYPE_LEN 50 - -static const char *system_types[] = { - [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine", - [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box", - [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box", - [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches", - [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", - [MACH_LEMOTE_NAS] = "lemote-nas-2f", - [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", - [MACH_LOONGSON_GENERIC] = "generic-loongson-machine", - [MACH_LOONGSON_END] = NULL, -}; - -const char *get_system_type(void) -{ - return system_types[mips_machtype]; -} - -void __weak __init mach_prom_init_machtype(void) -{ -} - -void __init prom_init_machtype(void) -{ - char *p, str[MACHTYPE_LEN + 1]; - int machtype = MACH_LEMOTE_FL2E; - - mips_machtype = LOONGSON_MACHTYPE; - - p = strstr(arcs_cmdline, "machtype="); - if (!p) { - mach_prom_init_machtype(); - return; - } - p += strlen("machtype="); - strncpy(str, p, MACHTYPE_LEN); - str[MACHTYPE_LEN] = '\0'; - p = strstr(str, " "); - if (p) - *p = '\0'; - - for (; system_types[machtype]; machtype++) - if (strstr(system_types[machtype], str)) { - mips_machtype = machtype; - break; - } -} diff --git a/kernel/arch/mips/loongson/common/mem.c b/kernel/arch/mips/loongson/common/mem.c deleted file mode 100644 index b01d52473..000000000 --- a/kernel/arch/mips/loongson/common/mem.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/fs.h> -#include <linux/fcntl.h> -#include <linux/mm.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <boot_param.h> -#include <mem.h> -#include <pci.h> - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - -u32 memsize, highmemsize; - -void __init prom_init_memory(void) -{ - add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); - - add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << - 20), BOOT_MEM_RESERVED); - -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - { - int bit; - - bit = fls(memsize + highmemsize); - if (bit != ffs(memsize + highmemsize)) - bit += 20; - else - bit = bit + 20 - 1; - - /* set cpu window3 to map CPU to DDR: 2G -> 2G */ - LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, - 0x80000000ul, (1 << bit)); - mmiowb(); - } -#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ - -#ifdef CONFIG_64BIT - if (highmemsize > 0) - add_memory_region(LOONGSON_HIGHMEM_START, - highmemsize << 20, BOOT_MEM_RAM); - - add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - - LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); - -#endif /* !CONFIG_64BIT */ -} - -#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -void __init prom_init_memory(void) -{ - int i; - u32 node_id; - u32 mem_type; - - /* parse memory information */ - for (i = 0; i < loongson_memmap->nr_map; i++) { - node_id = loongson_memmap->map[i].node_id; - mem_type = loongson_memmap->map[i].mem_type; - - if (node_id == 0) { - switch (mem_type) { - case SYSTEM_RAM_LOW: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RAM); - break; - case SYSTEM_RAM_HIGH: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RAM); - break; - case MEM_RESERVED: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RESERVED); - break; - } - } - } -} - -#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -/* override of arch/mips/mm/cache.c: __uncached_access */ -int __uncached_access(struct file *file, unsigned long addr) -{ - if (file->f_flags & O_DSYNC) - return 1; - - return addr >= __pa(high_memory) || - ((addr >= LOONGSON_MMIO_MEM_START) && - (addr < LOONGSON_MMIO_MEM_END)); -} - -#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED - -#include <linux/pci.h> -#include <linux/sched.h> -#include <asm/current.h> - -static unsigned long uca_start, uca_end; - -pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot) -{ - unsigned long offset = pfn << PAGE_SHIFT; - unsigned long end = offset + size; - - if (__uncached_access(file, offset)) { - if (uca_start && (offset >= uca_start) && - (end <= uca_end)) - return __pgprot((pgprot_val(vma_prot) & - ~_CACHE_MASK) | - _CACHE_UNCACHED_ACCELERATED); - else - return pgprot_noncached(vma_prot); - } - return vma_prot; -} - -static int __init find_vga_mem_init(void) -{ - struct pci_dev *dev = 0; - struct resource *r; - int idx; - - if (uca_start) - return 0; - - for_each_pci_dev(dev) { - if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { - for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { - r = &dev->resource[idx]; - if (!r->start && r->end) - continue; - if (r->flags & IORESOURCE_IO) - continue; - if (r->flags & IORESOURCE_MEM) { - uca_start = r->start; - uca_end = r->end; - return 0; - } - } - } - } - - return 0; -} - -late_initcall(find_vga_mem_init); -#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ diff --git a/kernel/arch/mips/loongson/common/pci.c b/kernel/arch/mips/loongson/common/pci.c deleted file mode 100644 index 4e2575643..000000000 --- a/kernel/arch/mips/loongson/common/pci.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/pci.h> - -#include <pci.h> -#include <loongson.h> -#include <boot_param.h> - -static struct resource loongson_pci_mem_resource = { - .name = "pci memory space", - .start = LOONGSON_PCI_MEM_START, - .end = LOONGSON_PCI_MEM_END, - .flags = IORESOURCE_MEM, -}; - -static struct resource loongson_pci_io_resource = { - .name = "pci io space", - .start = LOONGSON_PCI_IO_START, - .end = IO_SPACE_LIMIT, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller loongson_pci_controller = { - .pci_ops = &loongson_pci_ops, - .io_resource = &loongson_pci_io_resource, - .mem_resource = &loongson_pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_offset = 0x00000000UL, -}; - -static void __init setup_pcimap(void) -{ - /* - * local to PCI mapping for CPU accessing PCI space - * CPU address space [256M,448M] is window for accessing pci space - * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M] - * - * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 - * [<2G] [384M,448M] [320M,384M] [0M,64M] - */ - LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | - LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | - LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | - LOONGSON_PCIMAP_WIN(0, 0); - - /* - * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] - */ - LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ - /* size: 256M, burst transmission, pre-fetch enable, 64bit */ - LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; - LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; - LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */ - LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul; - LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */ - LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul; - - /* avoid deadlock of PCI reading/writing lock operation */ - LOONGSON_PCI_ISR4C = 0xd2000001ul; - - /* can not change gnt to break pci transfer when device's gnt not - deassert for some broken device */ - LOONGSON_PXARB_CFG = 0x00fe0105ul; - -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - /* - * set cpu addr window2 to map CPU address space to PCI address space - */ - LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, - LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); -#endif -} - -extern int sbx00_acpi_init(void); - -static int __init pcibios_init(void) -{ - setup_pcimap(); - - loongson_pci_controller.io_map_base = mips_io_port_base; -#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE - loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; - loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; -#endif - register_pci_controller(&loongson_pci_controller); - -#ifdef CONFIG_CPU_LOONGSON3 - sbx00_acpi_init(); -#endif - - return 0; -} - -arch_initcall(pcibios_init); diff --git a/kernel/arch/mips/loongson/common/platform.c b/kernel/arch/mips/loongson/common/platform.c deleted file mode 100644 index 0ed38321a..000000000 --- a/kernel/arch/mips/loongson/common/platform.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/err.h> -#include <linux/smp.h> -#include <linux/platform_device.h> - -static struct platform_device loongson2_cpufreq_device = { - .name = "loongson2_cpufreq", - .id = -1, -}; - -static int __init loongson2_cpufreq_init(void) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - - /* Only 2F revision and it's successors support CPUFreq */ - if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) - return platform_device_register(&loongson2_cpufreq_device); - - return -ENODEV; -} - -arch_initcall(loongson2_cpufreq_init); diff --git a/kernel/arch/mips/loongson/common/pm.c b/kernel/arch/mips/loongson/common/pm.c deleted file mode 100644 index a6b67ccfc..000000000 --- a/kernel/arch/mips/loongson/common/pm.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * loongson-specific suspend support - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin <wuzhangjin@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/suspend.h> -#include <linux/interrupt.h> -#include <linux/pm.h> - -#include <asm/i8259.h> -#include <asm/mipsregs.h> - -#include <loongson.h> - -static unsigned int __maybe_unused cached_master_mask; /* i8259A */ -static unsigned int __maybe_unused cached_slave_mask; -static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */ - -void arch_suspend_disable_irqs(void) -{ - /* disable all mips events */ - local_irq_disable(); - -#ifdef CONFIG_I8259 - /* disable all events of i8259A */ - cached_slave_mask = inb(PIC_SLAVE_IMR); - cached_master_mask = inb(PIC_MASTER_IMR); - - outb(0xff, PIC_SLAVE_IMR); - inb(PIC_SLAVE_IMR); - outb(0xff, PIC_MASTER_IMR); - inb(PIC_MASTER_IMR); -#endif - /* disable all events of bonito */ - cached_bonito_irq_mask = LOONGSON_INTEN; - LOONGSON_INTENCLR = 0xffff; - (void)LOONGSON_INTENCLR; -} - -void arch_suspend_enable_irqs(void) -{ - /* enable all mips events */ - local_irq_enable(); -#ifdef CONFIG_I8259 - /* only enable the cached events of i8259A */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(cached_master_mask, PIC_MASTER_IMR); -#endif - /* enable all cached events of bonito */ - LOONGSON_INTENSET = cached_bonito_irq_mask; - (void)LOONGSON_INTENSET; -} - -/* - * Setup the board-specific events for waking up loongson from wait mode - */ -void __weak setup_wakeup_events(void) -{ -} - -/* - * Check wakeup events - */ -int __weak wakeup_loongson(void) -{ - return 1; -} - -/* - * If the events are really what we want to wakeup the CPU, wake it up - * otherwise put the CPU asleep again. - */ -static void wait_for_wakeup_events(void) -{ - while (!wakeup_loongson()) - LOONGSON_CHIPCFG(0) &= ~0x7; -} - -/* - * Stop all perf counters - * - * $24 is the control register of Loongson perf counter - */ -static inline void stop_perf_counters(void) -{ - __write_64bit_c0_register($24, 0, 0); -} - - -static void loongson_suspend_enter(void) -{ - static unsigned int cached_cpu_freq; - - /* setup wakeup events via enabling the IRQs */ - setup_wakeup_events(); - - stop_perf_counters(); - - cached_cpu_freq = LOONGSON_CHIPCFG(0); - - /* Put CPU into wait mode */ - LOONGSON_CHIPCFG(0) &= ~0x7; - - /* wait for the given events to wakeup cpu from wait mode */ - wait_for_wakeup_events(); - - LOONGSON_CHIPCFG(0) = cached_cpu_freq; - mmiowb(); -} - -void __weak mach_suspend(void) -{ -} - -void __weak mach_resume(void) -{ -} - -static int loongson_pm_enter(suspend_state_t state) -{ - mach_suspend(); - - /* processor specific suspend */ - loongson_suspend_enter(); - - mach_resume(); - - return 0; -} - -static int loongson_pm_valid_state(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_ON: - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - return 1; - - default: - return 0; - } -} - -static const struct platform_suspend_ops loongson_pm_ops = { - .valid = loongson_pm_valid_state, - .enter = loongson_pm_enter, -}; - -static int __init loongson_pm_init(void) -{ - suspend_set_ops(&loongson_pm_ops); - - return 0; -} -arch_initcall(loongson_pm_init); diff --git a/kernel/arch/mips/loongson/common/reset.c b/kernel/arch/mips/loongson/common/reset.c deleted file mode 100644 index a60715e11..000000000 --- a/kernel/arch/mips/loongson/common/reset.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * Copyright (C) 2009 Lemote, Inc. - * Author: Zhangjin Wu, wuzhangjin@gmail.com - */ -#include <linux/init.h> -#include <linux/pm.h> - -#include <asm/idle.h> -#include <asm/reboot.h> - -#include <loongson.h> -#include <boot_param.h> - -static inline void loongson_reboot(void) -{ -#ifndef CONFIG_CPU_JUMP_WORKAROUNDS - ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); -#else - void (*func)(void); - - func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); - - __asm__ __volatile__( - " .set noat \n" - " jr %[func] \n" - " .set at \n" - : /* No outputs */ - : [func] "r" (func)); -#endif -} - -static void loongson_restart(char *command) -{ -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - /* do preparation for reboot */ - mach_prepare_reboot(); - - /* reboot via jumping to boot base address */ - loongson_reboot(); -#else - void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; - - fw_restart(); - while (1) { - if (cpu_wait) - cpu_wait(); - } -#endif -} - -static void loongson_poweroff(void) -{ -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - mach_prepare_shutdown(); - unreachable(); -#else - void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; - - fw_poweroff(); - while (1) { - if (cpu_wait) - cpu_wait(); - } -#endif -} - -static void loongson_halt(void) -{ - pr_notice("\n\n** You can safely turn off the power now **\n\n"); - while (1) { - if (cpu_wait) - cpu_wait(); - } -} - -static int __init mips_reboot_setup(void) -{ - _machine_restart = loongson_restart; - _machine_halt = loongson_halt; - pm_power_off = loongson_poweroff; - - return 0; -} - -arch_initcall(mips_reboot_setup); diff --git a/kernel/arch/mips/loongson/common/rtc.c b/kernel/arch/mips/loongson/common/rtc.c deleted file mode 100644 index b5709af09..000000000 --- a/kernel/arch/mips/loongson/common/rtc.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Lemote Fuloong platform support - * - * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mc146818rtc.h> - -static struct resource loongson_rtc_resources[] = { - { - .start = RTC_PORT(0), - .end = RTC_PORT(1), - .flags = IORESOURCE_IO, - }, { - .start = RTC_IRQ, - .end = RTC_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device loongson_rtc_device = { - .name = "rtc_cmos", - .id = -1, - .resource = loongson_rtc_resources, - .num_resources = ARRAY_SIZE(loongson_rtc_resources), -}; - - -static int __init loongson_rtc_platform_init(void) -{ - platform_device_register(&loongson_rtc_device); - return 0; -} - -device_initcall(loongson_rtc_platform_init); diff --git a/kernel/arch/mips/loongson/common/serial.c b/kernel/arch/mips/loongson/common/serial.c deleted file mode 100644 index c23fa1373..000000000 --- a/kernel/arch/mips/loongson/common/serial.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Yan hua (yanhua@lemote.com) - * Author: Wu Zhangjin (wuzhangjin@gmail.com) - */ - -#include <linux/io.h> -#include <linux/init.h> -#include <linux/serial_8250.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -#define PORT(int, clk) \ -{ \ - .irq = int, \ - .uartclk = clk, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -#define PORT_M(int, clk) \ -{ \ - .irq = MIPS_CPU_IRQ_BASE + (int), \ - .uartclk = clk, \ - .iotype = UPIO_MEM, \ - .membase = (void __iomem *)NULL, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = { - [MACH_LOONGSON_UNKNOWN] = {}, - [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} }, - [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} }, - [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} }, - [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} }, - [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} }, - [MACH_LOONGSON_END] = {}, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, -}; - -static int __init serial_init(void) -{ - int i; - unsigned char iotype; - - iotype = uart8250_data[mips_machtype][0].iotype; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][0].mapbase = - loongson_uart_base[0]; - uart8250_data[mips_machtype][0].membase = - (void __iomem *)_loongson_uart_base[0]; - } - else if (UPIO_PORT == iotype) - uart8250_data[mips_machtype][0].iobase = - loongson_uart_base[0] - LOONGSON_PCIIO_BASE; - - if (loongson_sysconf.uarts[0].uartclk) - uart8250_data[mips_machtype][0].uartclk = - loongson_sysconf.uarts[0].uartclk; - - for (i = 1; i < loongson_sysconf.nr_uarts; i++) { - iotype = loongson_sysconf.uarts[i].iotype; - uart8250_data[mips_machtype][i].iotype = iotype; - loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][i].irq = - MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].mapbase = - loongson_uart_base[i]; - uart8250_data[mips_machtype][i].membase = - ioremap_nocache(loongson_uart_base[i], 8); - } else if (UPIO_PORT == iotype) { - uart8250_data[mips_machtype][i].irq = - loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].iobase = - loongson_uart_base[i] - LOONGSON_PCIIO_BASE; - } - - uart8250_data[mips_machtype][i].uartclk = - loongson_sysconf.uarts[i].uartclk; - uart8250_data[mips_machtype][i].flags = - UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - } - - memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts], - 0, sizeof(struct plat_serial8250_port)); - uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; - - return platform_device_register(&uart8250_device); -} - -device_initcall(serial_init); diff --git a/kernel/arch/mips/loongson/common/setup.c b/kernel/arch/mips/loongson/common/setup.c deleted file mode 100644 index d477dd6bb..000000000 --- a/kernel/arch/mips/loongson/common/setup.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/module.h> - -#include <asm/wbflush.h> -#include <asm/bootinfo.h> - -#include <loongson.h> - -#ifdef CONFIG_VT -#include <linux/console.h> -#include <linux/screen_info.h> -#endif - -static void wbflush_loongson(void) -{ - asm(".set\tpush\n\t" - ".set\tnoreorder\n\t" - ".set mips3\n\t" - "sync\n\t" - "nop\n\t" - ".set\tpop\n\t" - ".set mips0\n\t"); -} - -void (*__wbflush)(void) = wbflush_loongson; -EXPORT_SYMBOL(__wbflush); - -void __init plat_mem_setup(void) -{ -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; - - screen_info = (struct screen_info) { - .orig_x = 0, - .orig_y = 25, - .orig_video_cols = 80, - .orig_video_lines = 25, - .orig_video_isVGA = VIDEO_TYPE_VGAC, - .orig_video_points = 16, - }; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif -} diff --git a/kernel/arch/mips/loongson/common/time.c b/kernel/arch/mips/loongson/common/time.c deleted file mode 100644 index e1a5382ad..000000000 --- a/kernel/arch/mips/loongson/common/time.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/mc146818-time.h> -#include <asm/time.h> -#include <asm/hpet.h> - -#include <loongson.h> -#include <cs5536/cs5536_mfgpt.h> - -void __init plat_time_init(void) -{ - /* setup mips r4k timer */ - mips_hpt_frequency = cpu_clock_freq / 2; - -#ifdef CONFIG_RS780_HPET - setup_hpet_timer(); -#else - setup_mfgpt0_timer(); -#endif -} - -void read_persistent_clock(struct timespec *ts) -{ - ts->tv_sec = mc146818_get_cmos_time(); - ts->tv_nsec = 0; -} diff --git a/kernel/arch/mips/loongson/common/uart_base.c b/kernel/arch/mips/loongson/common/uart_base.c deleted file mode 100644 index 9de559d58..000000000 --- a/kernel/arch/mips/loongson/common/uart_base.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <asm/bootinfo.h> - -#include <loongson.h> - -/* raw */ -unsigned long loongson_uart_base[MAX_UARTS] = {}; -/* ioremapped */ -unsigned long _loongson_uart_base[MAX_UARTS] = {}; - -EXPORT_SYMBOL(loongson_uart_base); -EXPORT_SYMBOL(_loongson_uart_base); - -void prom_init_loongson_uart_base(void) -{ - switch (mips_machtype) { - case MACH_LOONGSON_GENERIC: - /* The CPU provided serial port (CPU) */ - loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0; - break; - case MACH_LEMOTE_FL2E: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8; - break; - case MACH_LEMOTE_FL2F: - case MACH_LEMOTE_LL2F: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8; - break; - case MACH_LEMOTE_ML2F7: - case MACH_LEMOTE_YL2F89: - case MACH_DEXXON_GDIUM2F10: - case MACH_LEMOTE_NAS: - default: - /* The CPU provided serial port (LPC) */ - loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8; - break; - } - - _loongson_uart_base[0] = - (unsigned long)ioremap_nocache(loongson_uart_base[0], 8); -} diff --git a/kernel/arch/mips/loongson/fuloong-2e/Makefile b/kernel/arch/mips/loongson/fuloong-2e/Makefile deleted file mode 100644 index b7622720c..000000000 --- a/kernel/arch/mips/loongson/fuloong-2e/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for Lemote Fuloong2e mini-PC board. -# - -obj-y += irq.o reset.o diff --git a/kernel/arch/mips/loongson/fuloong-2e/irq.c b/kernel/arch/mips/loongson/fuloong-2e/irq.c deleted file mode 100644 index ef5ec8f3d..000000000 --- a/kernel/arch/mips/loongson/fuloong-2e/irq.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/interrupt.h> - -#include <asm/irq_cpu.h> -#include <asm/i8259.h> - -#include <loongson.h> - -static void i8259_irqdispatch(void) -{ - int irq; - - irq = i8259_irq(); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); -} - -asmlinkage void mach_irq_dispatch(unsigned int pending) -{ - if (pending & CAUSEF_IP7) - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - else if (pending & CAUSEF_IP6) /* perf counter loverflow */ - do_perfcnt_IRQ(); - else if (pending & CAUSEF_IP5) - i8259_irqdispatch(); - else if (pending & CAUSEF_IP2) - bonito_irqdispatch(); - else - spurious_interrupt(); -} - -static struct irqaction cascade_irqaction = { - .handler = no_action, - .name = "cascade", - .flags = IRQF_NO_THREAD, -}; - -void __init mach_init_irq(void) -{ - /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq - */ - - /* most bonito irq should be level triggered */ - LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR | - LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES; - - /* Sets the first-level interrupt dispatcher. */ - mips_cpu_irq_init(); - init_i8259_irqs(); - bonito_irq_init(); - - /* bonito irq at IP2 */ - setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction); - /* 8259 irq at IP5 */ - setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction); -} diff --git a/kernel/arch/mips/loongson/fuloong-2e/reset.c b/kernel/arch/mips/loongson/fuloong-2e/reset.c deleted file mode 100644 index da4d2ae2a..000000000 --- a/kernel/arch/mips/loongson/fuloong-2e/reset.c +++ /dev/null @@ -1,23 +0,0 @@ -/* Board-specific reboot/shutdown routines - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <loongson.h> - -void mach_prepare_reboot(void) -{ - LOONGSON_GENCFG &= ~(1 << 2); - LOONGSON_GENCFG |= (1 << 2); -} - -void mach_prepare_shutdown(void) -{ -} diff --git a/kernel/arch/mips/loongson/lemote-2f/Makefile b/kernel/arch/mips/loongson/lemote-2f/Makefile deleted file mode 100644 index 4f9eaa328..000000000 --- a/kernel/arch/mips/loongson/lemote-2f/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for lemote loongson2f family machines -# - -obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o - -# -# Suspend Support -# - -obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o diff --git a/kernel/arch/mips/loongson/lemote-2f/clock.c b/kernel/arch/mips/loongson/lemote-2f/clock.c deleted file mode 100644 index 462e34d46..000000000 --- a/kernel/arch/mips/loongson/lemote-2f/clock.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology - * Author: Yanhua, yanh@lemote.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/errno.h> -#include <linux/export.h> -#include <linux/list.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> - -#include <asm/clock.h> -#include <asm/mach-loongson/loongson.h> - -static LIST_HEAD(clock_list); -static DEFINE_SPINLOCK(clock_lock); -static DEFINE_MUTEX(clock_list_sem); - -/* Minimum CLK support */ -enum { - DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT, - DC_87PT, DC_DISABLE, DC_RESV -}; - -struct cpufreq_frequency_table loongson2_clockmod_table[] = { - {0, DC_RESV, CPUFREQ_ENTRY_INVALID}, - {0, DC_ZERO, CPUFREQ_ENTRY_INVALID}, - {0, DC_25PT, 0}, - {0, DC_37PT, 0}, - {0, DC_50PT, 0}, - {0, DC_62PT, 0}, - {0, DC_75PT, 0}, - {0, DC_87PT, 0}, - {0, DC_DISABLE, 0}, - {0, DC_RESV, CPUFREQ_TABLE_END}, -}; -EXPORT_SYMBOL_GPL(loongson2_clockmod_table); - -static struct clk cpu_clk = { - .name = "cpu_clk", - .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, - .rate = 800000000, -}; - -struct clk *clk_get(struct device *dev, const char *id) -{ - return &cpu_clk; -} -EXPORT_SYMBOL(clk_get); - -static void propagate_rate(struct clk *clk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clock_list, node) { - if (likely(clkp->parent != clk)) - continue; - if (likely(clkp->ops && clkp->ops->recalc)) - clkp->ops->recalc(clkp); - if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) - propagate_rate(clkp); - } -} - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int rate_khz = rate / 1000; - struct cpufreq_frequency_table *pos; - int ret = 0; - int regval; - - if (likely(clk->ops && clk->ops->set_rate)) { - unsigned long flags; - - spin_lock_irqsave(&clock_lock, flags); - ret = clk->ops->set_rate(clk, rate, 0); - spin_unlock_irqrestore(&clock_lock, flags); - } - - if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) - propagate_rate(clk); - - cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table) - if (rate_khz == pos->frequency) - break; - if (rate_khz != pos->frequency) - return -ENOTSUPP; - - clk->rate = rate; - - regval = LOONGSON_CHIPCFG(0); - regval = (regval & ~0x7) | (pos->driver_data - 1); - LOONGSON_CHIPCFG(0) = regval; - - return ret; -} -EXPORT_SYMBOL_GPL(clk_set_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (likely(clk->ops && clk->ops->round_rate)) { - unsigned long flags, rounded; - - spin_lock_irqsave(&clock_lock, flags); - rounded = clk->ops->round_rate(clk, rate); - spin_unlock_irqrestore(&clock_lock, flags); - - return rounded; - } - - return rate; -} -EXPORT_SYMBOL_GPL(clk_round_rate); diff --git a/kernel/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/kernel/arch/mips/loongson/lemote-2f/ec_kb3310b.c deleted file mode 100644 index 2b666d3a3..000000000 --- a/kernel/arch/mips/loongson/lemote-2f/ec_kb3310b.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook - * - * Copyright (C) 2008 Lemote Inc. - * Author: liujl <liujl@lemote.com>, 2008-04-20 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/delay.h> - -#include "ec_kb3310b.h" - -static DEFINE_SPINLOCK(index_access_lock); -static DEFINE_SPINLOCK(port_access_lock); - -unsigned char ec_read(unsigned short addr) -{ - unsigned char value; - unsigned long flags; - - spin_lock_irqsave(&index_access_lock, flags); - outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); - outb((addr & 0x00ff), EC_IO_PORT_LOW); - value = inb(EC_IO_PORT_DATA); - spin_unlock_irqrestore(&index_access_lock, flags); - - return value; -} -EXPORT_SYMBOL_GPL(ec_read); - -void ec_write(unsigned short addr, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&index_access_lock, flags); - outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); - outb((addr & 0x00ff), EC_IO_PORT_LOW); - outb(val, EC_IO_PORT_DATA); - /* flush the write action */ - inb(EC_IO_PORT_DATA); - spin_unlock_irqrestore(&index_access_lock, flags); -} -EXPORT_SYMBOL_GPL(ec_write); - -/* - * This function is used for EC command writes and corresponding status queries. - */ -int ec_query_seq(unsigned char cmd) -{ - int timeout; - unsigned char status; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&port_access_lock, flags); - - /* make chip goto reset mode */ - udelay(EC_REG_DELAY); - outb(cmd, EC_CMD_PORT); - udelay(EC_REG_DELAY); - - /* check if the command is received by ec */ - timeout = EC_CMD_TIMEOUT; - status = inb(EC_STS_PORT); - while (timeout-- && (status & (1 << 1))) { - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - } - - spin_unlock_irqrestore(&port_access_lock, flags); - - if (timeout <= 0) { - printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); - ret = -EINVAL; - } else - printk(KERN_INFO - "(%x/%d)ec issued command %d status : 0x%x\n", - timeout, EC_CMD_TIMEOUT - timeout, cmd, status); - - return ret; -} -EXPORT_SYMBOL_GPL(ec_query_seq); - -/* - * Send query command to EC to get the proper event number - */ -int ec_query_event_num(void) -{ - return ec_query_seq(CMD_GET_EVENT_NUM); -} -EXPORT_SYMBOL(ec_query_event_num); - -/* - * Get event number from EC - * - * NOTE: This routine must follow the query_event_num function in the - * interrupt. - */ -int ec_get_event_num(void) -{ - int timeout = 100; - unsigned char value; - unsigned char status; - - udelay(EC_REG_DELAY); - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - while (timeout-- && !(status & (1 << 0))) { - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - } - if (timeout <= 0) { - pr_info("%s: get event number timeout.\n", __func__); - - return -EINVAL; - } - value = inb(EC_DAT_PORT); - udelay(EC_REG_DELAY); - - return value; -} -EXPORT_SYMBOL(ec_get_event_num); diff --git a/kernel/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/kernel/arch/mips/loongson/lemote-2f/ec_kb3310b.h deleted file mode 100644 index 5a3f1860d..000000000 --- a/kernel/arch/mips/loongson/lemote-2f/ec_kb3310b.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * KB3310B Embedded Controller - * - * Copyright (C) 2008 Lemote Inc. - * Author: liujl <liujl@lemote.com>, 2008-03-14 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef _EC_KB3310B_H -#define _EC_KB3310B_H - -extern unsigned char ec_read(unsigned short addr); -extern void ec_write(unsigned short addr, unsigned char val); -extern int ec_query_seq(unsigned char cmd); -extern int ec_query_event_num(void); -extern int ec_get_event_num(void); - -typedef int (*sci_handler) (int status); -extern sci_handler yeeloong_report_lid_status; - -#define SCI_IRQ_NUM 0x0A - -/* - * The following registers are determined by the EC index configuration. - * 1, fill the PORT_HIGH as EC register high part. - * 2, fill the PORT_LOW as EC register low part. - * 3, fill the PORT_DATA as EC register write data or get the data from it. - */ -#define EC_IO_PORT_HIGH 0x0381 -#define EC_IO_PORT_LOW 0x0382 -#define EC_IO_PORT_DATA 0x0383 - -/* - * EC delay time is 500us for register and status access - */ -#define EC_REG_DELAY 500 /* unit : us */ -#define EC_CMD_TIMEOUT 0x1000 - -/* - * EC access port for SCI communication - */ -#define EC_CMD_PORT 0x66 -#define EC_STS_PORT 0x66 -#define EC_DAT_PORT 0x62 -#define CMD_INIT_IDLE_MODE 0xdd -#define CMD_EXIT_IDLE_MODE 0xdf -#define CMD_INIT_RESET_MODE 0xd8 -#define CMD_REBOOT_SYSTEM 0x8c -#define CMD_GET_EVENT_NUM 0x84 -#define CMD_PROGRAM_PIECE 0xda - -/* temperature & fan registers */ -#define REG_TEMPERATURE_VALUE 0xF458 -#define REG_FAN_AUTO_MAN_SWITCH 0xF459 -#define BIT_FAN_AUTO 0 -#define BIT_FAN_MANUAL 1 -#define REG_FAN_CONTROL 0xF4D2 -#define BIT_FAN_CONTROL_ON (1 << 0) -#define BIT_FAN_CONTROL_OFF (0 << 0) -#define REG_FAN_STATUS 0xF4DA -#define BIT_FAN_STATUS_ON (1 << 0) -#define BIT_FAN_STATUS_OFF (0 << 0) -#define REG_FAN_SPEED_HIGH 0xFE22 -#define REG_FAN_SPEED_LOW 0xFE23 -#define REG_FAN_SPEED_LEVEL 0xF4CC -/* fan speed divider */ -#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ - -/* battery registers */ -#define REG_BAT_DESIGN_CAP_HIGH 0xF77D -#define REG_BAT_DESIGN_CAP_LOW 0xF77E -#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 -#define REG_BAT_FULLCHG_CAP_LOW 0xF781 -#define REG_BAT_DESIGN_VOL_HIGH 0xF782 -#define REG_BAT_DESIGN_VOL_LOW 0xF783 -#define REG_BAT_CURRENT_HIGH 0xF784 -#define REG_BAT_CURRENT_LOW 0xF785 -#define REG_BAT_VOLTAGE_HIGH 0xF786 -#define REG_BAT_VOLTAGE_LOW 0xF787 -#define REG_BAT_TEMPERATURE_HIGH 0xF788 -#define REG_BAT_TEMPERATURE_LOW 0xF789 -#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 -#define REG_BAT_RELATIVE_CAP_LOW 0xF493 -#define REG_BAT_VENDOR 0xF4C4 -#define FLAG_BAT_VENDOR_SANYO 0x01 -#define FLAG_BAT_VENDOR_SIMPLO 0x02 -#define REG_BAT_CELL_COUNT 0xF4C6 -#define FLAG_BAT_CELL_3S1P 0x03 -#define FLAG_BAT_CELL_3S2P 0x06 -#define REG_BAT_CHARGE 0xF4A2 -#define FLAG_BAT_CHARGE_DISCHARGE 0x01 -#define FLAG_BAT_CHARGE_CHARGE 0x02 -#define FLAG_BAT_CHARGE_ACPOWER 0x00 -#define REG_BAT_STATUS 0xF4B0 -#define BIT_BAT_STATUS_LOW (1 << 5) -#define BIT_BAT_STATUS_DESTROY (1 << 2) -#define BIT_BAT_STATUS_FULL (1 << 1) -#define BIT_BAT_STATUS_IN (1 << 0) -#define REG_BAT_CHARGE_STATUS 0xF4B1 -#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) -#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) -#define REG_BAT_STATE 0xF482 -#define BIT_BAT_STATE_CHARGING (1 << 1) -#define BIT_BAT_STATE_DISCHARGING (1 << 0) -#define REG_BAT_POWER 0xF440 -#define BIT_BAT_POWER_S3 (1 << 2) -#define BIT_BAT_POWER_ON (1 << 1) -#define BIT_BAT_POWER_ACIN (1 << 0) - -/* other registers */ -/* Audio: rd/wr */ -#define REG_AUDIO_VOLUME 0xF46C -#define REG_AUDIO_MUTE 0xF4E7 -#define REG_AUDIO_BEEP 0xF4D0 -/* USB port power or not: rd/wr */ -#define REG_USB0_FLAG 0xF461 -#define REG_USB1_FLAG 0xF462 -#define REG_USB2_FLAG 0xF463 -#define BIT_USB_FLAG_ON 1 -#define BIT_USB_FLAG_OFF 0 -/* LID */ -#define REG_LID_DETECT 0xF4BD -#define BIT_LID_DETECT_ON 1 -#define BIT_LID_DETECT_OFF 0 -/* CRT */ -#define REG_CRT_DETECT 0xF4AD -#define BIT_CRT_DETECT_PLUG 1 -#define BIT_CRT_DETECT_UNPLUG 0 -/* LCD backlight brightness adjust: 9 levels */ -#define REG_DISPLAY_BRIGHTNESS 0xF4F5 -/* Black screen Status */ -#define BIT_DISPLAY_LCD_ON 1 -#define BIT_DISPLAY_LCD_OFF 0 -/* LCD backlight control: off/restore */ -#define REG_BACKLIGHT_CTRL 0xF7BD -#define BIT_BACKLIGHT_ON 1 -#define BIT_BACKLIGHT_OFF 0 -/* Reset the machine auto-clear: rd/wr */ -#define REG_RESET 0xF4EC -#define BIT_RESET_ON 1 -/* Light the led: rd/wr */ -#define REG_LED 0xF4C8 -#define BIT_LED_RED_POWER (1 << 0) -#define BIT_LED_ORANGE_POWER (1 << 1) -#define BIT_LED_GREEN_CHARGE (1 << 2) -#define BIT_LED_RED_CHARGE (1 << 3) -#define BIT_LED_NUMLOCK (1 << 4) -/* Test led mode, all led on/off */ -#define REG_LED_TEST 0xF4C2 -#define BIT_LED_TEST_IN 1 -#define BIT_LED_TEST_OUT 0 -/* Camera on/off */ -#define REG_CAMERA_STATUS 0xF46A -#define BIT_CAMERA_STATUS_ON 1 -#define BIT_CAMERA_STATUS_OFF 0 -#define REG_CAMERA_CONTROL 0xF7B7 -#define BIT_CAMERA_CONTROL_OFF 0 -#define BIT_CAMERA_CONTROL_ON 1 -/* Wlan Status */ -#define REG_WLAN 0xF4FA -#define BIT_WLAN_ON 1 -#define BIT_WLAN_OFF 0 -#define REG_DISPLAY_LCD 0xF79F - -/* SCI Event Number from EC */ -enum { - EVENT_LID = 0x23, /* LID open/close */ - EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ - EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ - EVENT_OVERTEMP, /* Over-temperature happened */ - EVENT_CRT_DETECT, /* CRT is connected */ - EVENT_CAMERA, /* Camera on/off */ - EVENT_USB_OC2, /* USB2 Over Current occurred */ - EVENT_USB_OC0, /* USB0 Over Current occurred */ - EVENT_BLACK_SCREEN, /* Turn on/off backlight */ - EVENT_AUDIO_MUTE, /* Mute on/off */ - EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ - EVENT_AC_BAT, /* AC & Battery relative issue */ - EVENT_AUDIO_VOLUME, /* Volume adjust */ - EVENT_WLAN, /* Wlan on/off */ - EVENT_END -}; - -#endif /* !_EC_KB3310B_H */ diff --git a/kernel/arch/mips/loongson/lemote-2f/irq.c b/kernel/arch/mips/loongson/lemote-2f/irq.c deleted file mode 100644 index cab5f43e0..000000000 --- a/kernel/arch/mips/loongson/lemote-2f/irq.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright (C) 2007 Lemote Inc. - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/interrupt.h> -#include <linux/module.h> - -#include <asm/irq_cpu.h> -#include <asm/i8259.h> -#include <asm/mipsregs.h> - -#include <loongson.h> -#include <machine.h> - -#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ -#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ -#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ -#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ - -#define LOONGSON_INT_BIT_INT0 (1 << 11) -#define LOONGSON_INT_BIT_INT1 (1 << 12) - -/* - * The generic i8259_irq() make the kernel hang on booting. Since we cannot - * get the irq via the IRR directly, we access the ISR instead. - */ -int mach_i8259_irq(void) -{ - int irq, isr; - - irq = -1; - - if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { - raw_spin_lock(&i8259A_lock); - isr = inb(PIC_MASTER_CMD) & - ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); - if (!isr) - isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8; - irq = ffs(isr) - 1; - if (unlikely(irq == 7)) { - /* - * This may be a spurious interrupt. - * - * Read the interrupt status register (ISR). If the most - * significant bit is not set then there is no valid - * interrupt. - */ - outb(0x0B, PIC_MASTER_ISR); /* ISR register */ - if (~inb(PIC_MASTER_ISR) & 0x80) - irq = -1; - } - raw_spin_unlock(&i8259A_lock); - } - - return irq; -} -EXPORT_SYMBOL(mach_i8259_irq); - -static void i8259_irqdispatch(void) -{ - int irq; - - irq = mach_i8259_irq(); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); -} - -void mach_irq_dispatch(unsigned int pending) -{ - if (pending & CAUSEF_IP7) - do_IRQ(LOONGSON_TIMER_IRQ); - else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ - do_perfcnt_IRQ(); - bonito_irqdispatch(); - } else if (pending & CAUSEF_IP3) /* CPU UART */ - do_IRQ(LOONGSON_UART_IRQ); - else if (pending & CAUSEF_IP2) /* South Bridge */ - i8259_irqdispatch(); - else - spurious_interrupt(); -} - -static irqreturn_t ip6_action(int cpl, void *dev_id) -{ - return IRQ_HANDLED; -} - -static struct irqaction ip6_irqaction = { - .handler = ip6_action, - .name = "cascade", - .flags = IRQF_SHARED | IRQF_NO_THREAD, -}; - -static struct irqaction cascade_irqaction = { - .handler = no_action, - .name = "cascade", - .flags = IRQF_NO_THREAD, -}; - -void __init mach_init_irq(void) -{ - /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq - */ - - /* setup cs5536 as high level trigger */ - LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1; - LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1); - - /* Sets the first-level interrupt dispatcher. */ - mips_cpu_irq_init(); - init_i8259_irqs(); - bonito_irq_init(); - - /* setup north bridge irq (bonito) */ - setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction); - /* setup source bridge irq (i8259) */ - setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction); -} diff --git a/kernel/arch/mips/loongson/lemote-2f/machtype.c b/kernel/arch/mips/loongson/lemote-2f/machtype.c deleted file mode 100644 index b55e6eece..000000000 --- a/kernel/arch/mips/loongson/lemote-2f/machtype.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/bootinfo.h> - -#include <loongson.h> - -void __init mach_prom_init_machtype(void) -{ - /* We share the same kernel image file among Lemote 2F family - * of machines, and provide the machtype= kernel command line - * to users to indicate their machine, this command line will - * be passed by the latest PMON automatically. and fortunately, - * up to now, we can get the machine type from the PMON_VER= - * commandline directly except the NAS machine, In the old - * machines, this will help the users a lot. - * - * If no "machtype=" passed, get machine type from "PMON_VER=". - * PMON_VER=LM8089 Lemote 8.9'' netbook - * LM8101 Lemote 10.1'' netbook - * (The above two netbooks have the same kernel support) - * LM6XXX Lemote FuLoong(2F) box series - * LM9XXX Lemote LynLoong PC series - */ - if (strstr(arcs_cmdline, "PMON_VER=LM")) { - if (strstr(arcs_cmdline, "PMON_VER=LM8")) - mips_machtype = MACH_LEMOTE_YL2F89; - else if (strstr(arcs_cmdline, "PMON_VER=LM6")) - mips_machtype = MACH_LEMOTE_FL2F; - else if (strstr(arcs_cmdline, "PMON_VER=LM9")) - mips_machtype = MACH_LEMOTE_LL2F; - else - mips_machtype = MACH_LEMOTE_NAS; - - strcat(arcs_cmdline, " machtype="); - strcat(arcs_cmdline, get_system_type()); - strcat(arcs_cmdline, " "); - } -} diff --git a/kernel/arch/mips/loongson/lemote-2f/pm.c b/kernel/arch/mips/loongson/lemote-2f/pm.c deleted file mode 100644 index cac4d382e..000000000 --- a/kernel/arch/mips/loongson/lemote-2f/pm.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Lemote loongson2f family machines' specific suspend support - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin <wuzhangjin@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/suspend.h> -#include <linux/interrupt.h> -#include <linux/pm.h> -#include <linux/i8042.h> -#include <linux/module.h> - -#include <asm/i8259.h> -#include <asm/mipsregs.h> -#include <asm/bootinfo.h> - -#include <loongson.h> - -#include <cs5536/cs5536_mfgpt.h> -#include "ec_kb3310b.h" - -#define I8042_KBD_IRQ 1 -#define I8042_CTR_KBDINT 0x01 -#define I8042_CTR_KBDDIS 0x10 - -static unsigned char i8042_ctr; - -static int i8042_enable_kbd_port(void) -{ - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { - pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port." - "\n"); - return -EIO; - } - - i8042_ctr &= ~I8042_CTR_KBDDIS; - i8042_ctr |= I8042_CTR_KBDINT; - - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { - i8042_ctr &= ~I8042_CTR_KBDINT; - i8042_ctr |= I8042_CTR_KBDDIS; - pr_err("i8042.c: Failed to enable KBD port.\n"); - - return -EIO; - } - - return 0; -} - -void setup_wakeup_events(void) -{ - int irq_mask; - - switch (mips_machtype) { - case MACH_LEMOTE_ML2F7: - case MACH_LEMOTE_YL2F89: - /* open the keyboard irq in i8259A */ - outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR); - irq_mask = inb(PIC_MASTER_IMR); - - /* enable keyboard port */ - i8042_enable_kbd_port(); - - /* Wakeup CPU via SCI lid open event */ - outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR); - inb(PIC_MASTER_IMR); - outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR); - inb(PIC_SLAVE_IMR); - - break; - - default: - break; - } -} - -static struct delayed_work lid_task; -static int initialized; -/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */ -sci_handler yeeloong_report_lid_status; -EXPORT_SYMBOL(yeeloong_report_lid_status); -static void yeeloong_lid_update_task(struct work_struct *work) -{ - if (yeeloong_report_lid_status) - yeeloong_report_lid_status(BIT_LID_DETECT_ON); -} - -int wakeup_loongson(void) -{ - int irq; - - /* query the interrupt number */ - irq = mach_i8259_irq(); - if (irq < 0) - return 0; - - printk(KERN_INFO "%s: irq = %d\n", __func__, irq); - - if (irq == I8042_KBD_IRQ) - return 1; - else if (irq == SCI_IRQ_NUM) { - int ret, sci_event; - /* query the event number */ - ret = ec_query_seq(CMD_GET_EVENT_NUM); - if (ret < 0) - return 0; - sci_event = ec_get_event_num(); - if (sci_event < 0) - return 0; - if (sci_event == EVENT_LID) { - int lid_status; - /* check the LID status */ - lid_status = ec_read(REG_LID_DETECT); - /* wakeup cpu when people open the LID */ - if (lid_status == BIT_LID_DETECT_ON) { - /* If we call it directly here, the WARNING - * will be sent out by getnstimeofday - * via "WARN_ON(timekeeping_suspended);" - * because we can not schedule in suspend mode. - */ - if (initialized == 0) { - INIT_DELAYED_WORK(&lid_task, - yeeloong_lid_update_task); - initialized = 1; - } - schedule_delayed_work(&lid_task, 1); - return 1; - } - } - } - - return 0; -} - -void __weak mach_suspend(void) -{ - disable_mfgpt0_counter(); -} - -void __weak mach_resume(void) -{ - enable_mfgpt0_counter(); -} diff --git a/kernel/arch/mips/loongson/lemote-2f/reset.c b/kernel/arch/mips/loongson/lemote-2f/reset.c deleted file mode 100644 index a26ca7fcd..000000000 --- a/kernel/arch/mips/loongson/lemote-2f/reset.c +++ /dev/null @@ -1,159 +0,0 @@ -/* Board-specific reboot/shutdown routines - * - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/types.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> - -#include <cs5536/cs5536.h> -#include "ec_kb3310b.h" - -static void reset_cpu(void) -{ - /* - * reset cpu to full speed, this is needed when enabling cpu frequency - * scalling - */ - LOONGSON_CHIPCFG(0) |= 0x7; -} - -/* reset support for fuloong2f */ - -static void fl2f_reboot(void) -{ - reset_cpu(); - - /* send a reset signal to south bridge. - * - * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset - * normally with this reset operation and it will not work in PMON, but - * you can type halt command and then reboot, seems the hardware reset - * logic not work normally. - */ - { - u32 hi, lo; - _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo); - lo |= 0x00000001; - _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo); - } -} - -static void fl2f_shutdown(void) -{ - u32 hi, lo, val; - int gpio_base; - - /* get gpio base */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo); - gpio_base = lo & 0xff00; - - /* make cs5536 gpio13 output enable */ - val = inl(gpio_base + GPIOL_OUT_EN); - val &= ~(1 << (16 + 13)); - val |= (1 << 13); - outl(val, gpio_base + GPIOL_OUT_EN); - mmiowb(); - /* make cs5536 gpio13 output low level voltage. */ - val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13)); - val |= (1 << (16 + 13)); - outl(val, gpio_base + GPIOL_OUT_VAL); - mmiowb(); -} - -/* reset support for yeeloong2f and mengloong2f notebook */ - -static void ml2f_reboot(void) -{ - reset_cpu(); - - /* sending an reset signal to EC(embedded controller) */ - ec_write(REG_RESET, BIT_RESET_ON); -} - -#define yl2f89_reboot ml2f_reboot - -/* menglong(7inches) laptop has different shutdown logic from 8.9inches */ -#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d -#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e -#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f -#define REG_SHUTDOWN_HIGH 0xFC -#define REG_SHUTDOWN_LOW 0x29 -#define BIT_SHUTDOWN_ON (1 << 1) - -static void ml2f_shutdown(void) -{ - u8 val; - u64 i; - - outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH); - outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW); - mmiowb(); - val = inb(EC_SHUTDOWN_IO_PORT_DATA); - outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA); - mmiowb(); - /* need enough wait here... how many microseconds needs? */ - for (i = 0; i < 0x10000; i++) - delay(); - outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA); - mmiowb(); -} - -static void yl2f89_shutdown(void) -{ - /* cpu-gpio0 output low */ - LOONGSON_GPIODATA &= ~0x00000001; - /* cpu-gpio0 as output */ - LOONGSON_GPIOIE &= ~0x00000001; -} - -void mach_prepare_reboot(void) -{ - switch (mips_machtype) { - case MACH_LEMOTE_FL2F: - case MACH_LEMOTE_NAS: - case MACH_LEMOTE_LL2F: - fl2f_reboot(); - break; - case MACH_LEMOTE_ML2F7: - ml2f_reboot(); - break; - case MACH_LEMOTE_YL2F89: - yl2f89_reboot(); - break; - default: - break; - } -} - -void mach_prepare_shutdown(void) -{ - switch (mips_machtype) { - case MACH_LEMOTE_FL2F: - case MACH_LEMOTE_NAS: - case MACH_LEMOTE_LL2F: - fl2f_shutdown(); - break; - case MACH_LEMOTE_ML2F7: - ml2f_shutdown(); - break; - case MACH_LEMOTE_YL2F89: - yl2f89_shutdown(); - break; - default: - break; - } -} diff --git a/kernel/arch/mips/loongson/loongson-3/Makefile b/kernel/arch/mips/loongson/loongson-3/Makefile deleted file mode 100644 index 622fead5e..000000000 --- a/kernel/arch/mips/loongson/loongson-3/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for Loongson-3 family machines -# -obj-y += irq.o cop2-ex.o platform.o - -obj-$(CONFIG_SMP) += smp.o - -obj-$(CONFIG_NUMA) += numa.o - -obj-$(CONFIG_RS780_HPET) += hpet.o diff --git a/kernel/arch/mips/loongson/loongson-3/cop2-ex.c b/kernel/arch/mips/loongson/loongson-3/cop2-ex.c deleted file mode 100644 index ea13764d0..000000000 --- a/kernel/arch/mips/loongson/loongson-3/cop2-ex.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2014 Lemote Corporation. - * written by Huacai Chen <chenhc@lemote.com> - * - * based on arch/mips/cavium-octeon/cpu.c - * Copyright (C) 2009 Wind River Systems, - * written by Ralf Baechle <ralf@linux-mips.org> - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/notifier.h> - -#include <asm/fpu.h> -#include <asm/cop2.h> -#include <asm/current.h> -#include <asm/mipsregs.h> - -static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action, - void *data) -{ - int fpu_owned; - int fr = !test_thread_flag(TIF_32BIT_FPREGS); - - switch (action) { - case CU2_EXCEPTION: - preempt_disable(); - fpu_owned = __is_fpu_owner(); - if (!fr) - set_c0_status(ST0_CU1 | ST0_CU2); - else - set_c0_status(ST0_CU1 | ST0_CU2 | ST0_FR); - enable_fpu_hazard(); - KSTK_STATUS(current) |= (ST0_CU1 | ST0_CU2); - if (fr) - KSTK_STATUS(current) |= ST0_FR; - else - KSTK_STATUS(current) &= ~ST0_FR; - /* If FPU is owned, we needn't init or restore fp */ - if (!fpu_owned) { - set_thread_flag(TIF_USEDFPU); - if (!used_math()) { - _init_fpu(current->thread.fpu.fcr31); - set_used_math(); - } else - _restore_fp(current); - } - preempt_enable(); - - return NOTIFY_STOP; /* Don't call default notifier */ - } - - return NOTIFY_OK; /* Let default notifier send signals */ -} - -static int __init loongson_cu2_setup(void) -{ - return cu2_notifier(loongson_cu2_call, 0); -} -early_initcall(loongson_cu2_setup); diff --git a/kernel/arch/mips/loongson/loongson-3/hpet.c b/kernel/arch/mips/loongson/loongson-3/hpet.c deleted file mode 100644 index 5c21cd3bd..000000000 --- a/kernel/arch/mips/loongson/loongson-3/hpet.c +++ /dev/null @@ -1,257 +0,0 @@ -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/percpu.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> - -#include <asm/hpet.h> -#include <asm/time.h> - -#define SMBUS_CFG_BASE (loongson_sysconf.ht_control_base + 0x0300a000) -#define SMBUS_PCI_REG40 0x40 -#define SMBUS_PCI_REG64 0x64 -#define SMBUS_PCI_REGB4 0xb4 - -static DEFINE_SPINLOCK(hpet_lock); -DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device); - -static unsigned int smbus_read(int offset) -{ - return *(volatile unsigned int *)(SMBUS_CFG_BASE + offset); -} - -static void smbus_write(int offset, int data) -{ - *(volatile unsigned int *)(SMBUS_CFG_BASE + offset) = data; -} - -static void smbus_enable(int offset, int bit) -{ - unsigned int cfg = smbus_read(offset); - - cfg |= bit; - smbus_write(offset, cfg); -} - -static int hpet_read(int offset) -{ - return *(volatile unsigned int *)(HPET_MMIO_ADDR + offset); -} - -static void hpet_write(int offset, int data) -{ - *(volatile unsigned int *)(HPET_MMIO_ADDR + offset) = data; -} - -static void hpet_start_counter(void) -{ - unsigned int cfg = hpet_read(HPET_CFG); - - cfg |= HPET_CFG_ENABLE; - hpet_write(HPET_CFG, cfg); -} - -static void hpet_stop_counter(void) -{ - unsigned int cfg = hpet_read(HPET_CFG); - - cfg &= ~HPET_CFG_ENABLE; - hpet_write(HPET_CFG, cfg); -} - -static void hpet_reset_counter(void) -{ - hpet_write(HPET_COUNTER, 0); - hpet_write(HPET_COUNTER + 4, 0); -} - -static void hpet_restart_counter(void) -{ - hpet_stop_counter(); - hpet_reset_counter(); - hpet_start_counter(); -} - -static void hpet_enable_legacy_int(void) -{ - /* Do nothing on Loongson-3 */ -} - -static void hpet_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - int cfg = 0; - - spin_lock(&hpet_lock); - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - pr_info("set clock event to periodic mode!\n"); - /* stop counter */ - hpet_stop_counter(); - - /* enables the timer0 to generate a periodic interrupt */ - cfg = hpet_read(HPET_T0_CFG); - cfg &= ~HPET_TN_LEVEL; - cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | - HPET_TN_SETVAL | HPET_TN_32BIT; - hpet_write(HPET_T0_CFG, cfg); - - /* set the comparator */ - hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL); - udelay(1); - hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL); - - /* start counter */ - hpet_start_counter(); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - cfg = hpet_read(HPET_T0_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_write(HPET_T0_CFG, cfg); - break; - case CLOCK_EVT_MODE_ONESHOT: - pr_info("set clock event to one shot mode!\n"); - cfg = hpet_read(HPET_T0_CFG); - /* set timer0 type - * 1 : periodic interrupt - * 0 : non-periodic(oneshot) interrupt - */ - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_write(HPET_T0_CFG, cfg); - break; - case CLOCK_EVT_MODE_RESUME: - hpet_enable_legacy_int(); - break; - } - spin_unlock(&hpet_lock); -} - -static int hpet_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - unsigned int cnt; - int res; - - cnt = hpet_read(HPET_COUNTER); - cnt += delta; - hpet_write(HPET_T0_CMP, cnt); - - res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0; - return res; -} - -static irqreturn_t hpet_irq_handler(int irq, void *data) -{ - int is_irq; - struct clock_event_device *cd; - unsigned int cpu = smp_processor_id(); - - is_irq = hpet_read(HPET_STATUS); - if (is_irq & HPET_T0_IRS) { - /* clear the TIMER0 irq status register */ - hpet_write(HPET_STATUS, HPET_T0_IRS); - cd = &per_cpu(hpet_clockevent_device, cpu); - cd->event_handler(cd); - return IRQ_HANDLED; - } - return IRQ_NONE; -} - -static struct irqaction hpet_irq = { - .handler = hpet_irq_handler, - .flags = IRQF_NOBALANCING | IRQF_TIMER, - .name = "hpet", -}; - -/* - * hpet address assignation and irq setting should be done in bios. - * but pmon don't do this, we just setup here directly. - * The operation under is normal. unfortunately, hpet_setup process - * is before pci initialize. - * - * { - * struct pci_dev *pdev; - * - * pdev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); - * pci_write_config_word(pdev, SMBUS_PCI_REGB4, HPET_ADDR); - * - * ... - * } - */ -static void hpet_setup(void) -{ - /* set hpet base address */ - smbus_write(SMBUS_PCI_REGB4, HPET_ADDR); - - /* enable decodeing of access to HPET MMIO*/ - smbus_enable(SMBUS_PCI_REG40, (1 << 28)); - - /* HPET irq enable */ - smbus_enable(SMBUS_PCI_REG64, (1 << 10)); - - hpet_enable_legacy_int(); -} - -void __init setup_hpet_timer(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd; - - hpet_setup(); - - cd = &per_cpu(hpet_clockevent_device, cpu); - cd->name = "hpet"; - cd->rating = 320; - cd->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - cd->set_mode = hpet_set_mode; - cd->set_next_event = hpet_next_event; - cd->irq = HPET_T0_IRQ; - cd->cpumask = cpumask_of(cpu); - clockevent_set_clock(cd, HPET_FREQ); - cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); - cd->min_delta_ns = 5000; - - clockevents_register_device(cd); - setup_irq(HPET_T0_IRQ, &hpet_irq); - pr_info("hpet clock event device register\n"); -} - -static cycle_t hpet_read_counter(struct clocksource *cs) -{ - return (cycle_t)hpet_read(HPET_COUNTER); -} - -static void hpet_suspend(struct clocksource *cs) -{ -} - -static void hpet_resume(struct clocksource *cs) -{ - hpet_setup(); - hpet_restart_counter(); -} - -static struct clocksource csrc_hpet = { - .name = "hpet", - /* mips clocksource rating is less than 300, so hpet is better. */ - .rating = 300, - .read = hpet_read_counter, - .mask = CLOCKSOURCE_MASK(32), - /* oneshot mode work normal with this flag */ - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .suspend = hpet_suspend, - .resume = hpet_resume, - .mult = 0, - .shift = 10, -}; - -int __init init_hpet_clocksource(void) -{ - csrc_hpet.mult = clocksource_hz2mult(HPET_FREQ, csrc_hpet.shift); - return clocksource_register_hz(&csrc_hpet, HPET_FREQ); -} - -arch_initcall(init_hpet_clocksource); diff --git a/kernel/arch/mips/loongson/loongson-3/irq.c b/kernel/arch/mips/loongson/loongson-3/irq.c deleted file mode 100644 index 0f75b6b3d..000000000 --- a/kernel/arch/mips/loongson/loongson-3/irq.c +++ /dev/null @@ -1,143 +0,0 @@ -#include <loongson.h> -#include <irq.h> -#include <linux/interrupt.h> -#include <linux/module.h> - -#include <asm/irq_cpu.h> -#include <asm/i8259.h> -#include <asm/mipsregs.h> - -#include "smp.h" - -unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15}; - -static void ht_irqdispatch(void) -{ - unsigned int i, irq; - - irq = LOONGSON_HT1_INT_VECTOR(0); - LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */ - - for (i = 0; i < ARRAY_SIZE(ht_irq); i++) { - if (irq & (0x1 << ht_irq[i])) - do_IRQ(ht_irq[i]); - } -} - -void mach_irq_dispatch(unsigned int pending) -{ - if (pending & CAUSEF_IP7) - do_IRQ(LOONGSON_TIMER_IRQ); -#if defined(CONFIG_SMP) - else if (pending & CAUSEF_IP6) - loongson3_ipi_interrupt(NULL); -#endif - else if (pending & CAUSEF_IP3) - ht_irqdispatch(); - else if (pending & CAUSEF_IP2) - do_IRQ(LOONGSON_UART_IRQ); - else { - pr_err("%s : spurious interrupt\n", __func__); - spurious_interrupt(); - } -} - -static struct irqaction cascade_irqaction = { - .handler = no_action, - .flags = IRQF_NO_SUSPEND, - .name = "cascade", -}; - -static inline void mask_loongson_irq(struct irq_data *d) -{ - clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE)); - irq_disable_hazard(); - - /* Workaround: UART IRQ may deliver to any core */ - if (d->irq == LOONGSON_UART_IRQ) { - int cpu = smp_processor_id(); - int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node; - int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node; - u64 intenclr_addr = smp_group[node_id] | - (u64)(&LOONGSON_INT_ROUTER_INTENCLR); - u64 introuter_lpc_addr = smp_group[node_id] | - (u64)(&LOONGSON_INT_ROUTER_LPC); - - *(volatile u32 *)intenclr_addr = 1 << 10; - *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id); - } -} - -static inline void unmask_loongson_irq(struct irq_data *d) -{ - /* Workaround: UART IRQ may deliver to any core */ - if (d->irq == LOONGSON_UART_IRQ) { - int cpu = smp_processor_id(); - int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node; - int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node; - u64 intenset_addr = smp_group[node_id] | - (u64)(&LOONGSON_INT_ROUTER_INTENSET); - u64 introuter_lpc_addr = smp_group[node_id] | - (u64)(&LOONGSON_INT_ROUTER_LPC); - - *(volatile u32 *)intenset_addr = 1 << 10; - *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id); - } - - set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE)); - irq_enable_hazard(); -} - - /* For MIPS IRQs which shared by all cores */ -static struct irq_chip loongson_irq_chip = { - .name = "Loongson", - .irq_ack = mask_loongson_irq, - .irq_mask = mask_loongson_irq, - .irq_mask_ack = mask_loongson_irq, - .irq_unmask = unmask_loongson_irq, - .irq_eoi = unmask_loongson_irq, -}; - -void irq_router_init(void) -{ - int i; - - /* route LPC int to cpu core0 int 0 */ - LOONGSON_INT_ROUTER_LPC = - LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 0); - /* route HT1 int0 ~ int7 to cpu core0 INT1*/ - for (i = 0; i < 8; i++) - LOONGSON_INT_ROUTER_HT1(i) = - LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 1); - /* enable HT1 interrupt */ - LOONGSON_HT1_INTN_EN(0) = 0xffffffff; - /* enable router interrupt intenset */ - LOONGSON_INT_ROUTER_INTENSET = - LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10; -} - -void __init mach_init_irq(void) -{ - clear_c0_status(ST0_IM | ST0_BEV); - - irq_router_init(); - mips_cpu_irq_init(); - init_i8259_irqs(); - irq_set_chip_and_handler(LOONGSON_UART_IRQ, - &loongson_irq_chip, handle_level_irq); - - /* setup HT1 irq */ - setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction); - - set_c0_status(STATUSF_IP2 | STATUSF_IP6); -} - -#ifdef CONFIG_HOTPLUG_CPU - -void fixup_irqs(void) -{ - irq_cpu_offline(); - clear_c0_status(ST0_IM); -} - -#endif diff --git a/kernel/arch/mips/loongson/loongson-3/numa.c b/kernel/arch/mips/loongson/loongson-3/numa.c deleted file mode 100644 index 12d14ed48..000000000 --- a/kernel/arch/mips/loongson/loongson-3/numa.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Copyright (C) 2010 Loongson Inc. & Lemote Inc. & - * Insititute of Computing Technology - * Author: Xiang Gao, gaoxiang@ict.ac.cn - * Huacai Chen, chenhc@lemote.com - * Xiaofu Meng, Shuangshuang Zhang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/mmzone.h> -#include <linux/module.h> -#include <linux/nodemask.h> -#include <linux/swap.h> -#include <linux/memblock.h> -#include <linux/bootmem.h> -#include <linux/pfn.h> -#include <linux/highmem.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/sections.h> -#include <linux/irq.h> -#include <asm/bootinfo.h> -#include <asm/mc146818-time.h> -#include <asm/time.h> -#include <asm/wbflush.h> -#include <boot_param.h> - -static struct node_data prealloc__node_data[MAX_NUMNODES]; -unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; -EXPORT_SYMBOL(__node_distances); -struct node_data *__node_data[MAX_NUMNODES]; -EXPORT_SYMBOL(__node_data); - -static void enable_lpa(void) -{ - unsigned long value; - - value = __read_32bit_c0_register($16, 3); - value |= 0x00000080; - __write_32bit_c0_register($16, 3, value); - value = __read_32bit_c0_register($16, 3); - pr_info("CP0_Config3: CP0 16.3 (0x%lx)\n", value); - - value = __read_32bit_c0_register($5, 1); - value |= 0x20000000; - __write_32bit_c0_register($5, 1, value); - value = __read_32bit_c0_register($5, 1); - pr_info("CP0_PageGrain: CP0 5.1 (0x%lx)\n", value); -} - -static void cpu_node_probe(void) -{ - int i; - - nodes_clear(node_possible_map); - nodes_clear(node_online_map); - for (i = 0; i < loongson_sysconf.nr_nodes; i++) { - node_set_state(num_online_nodes(), N_POSSIBLE); - node_set_online(num_online_nodes()); - } - - pr_info("NUMA: Discovered %d cpus on %d nodes\n", - loongson_sysconf.nr_cpus, num_online_nodes()); -} - -static int __init compute_node_distance(int row, int col) -{ - int package_row = row * loongson_sysconf.cores_per_node / - loongson_sysconf.cores_per_package; - int package_col = col * loongson_sysconf.cores_per_node / - loongson_sysconf.cores_per_package; - - if (col == row) - return 0; - else if (package_row == package_col) - return 40; - else - return 100; -} - -static void __init init_topology_matrix(void) -{ - int row, col; - - for (row = 0; row < MAX_NUMNODES; row++) - for (col = 0; col < MAX_NUMNODES; col++) - __node_distances[row][col] = -1; - - for_each_online_node(row) { - for_each_online_node(col) { - __node_distances[row][col] = - compute_node_distance(row, col); - } - } -} - -static unsigned long nid_to_addroffset(unsigned int nid) -{ - unsigned long result; - switch (nid) { - case 0: - default: - result = NODE0_ADDRSPACE_OFFSET; - break; - case 1: - result = NODE1_ADDRSPACE_OFFSET; - break; - case 2: - result = NODE2_ADDRSPACE_OFFSET; - break; - case 3: - result = NODE3_ADDRSPACE_OFFSET; - break; - } - return result; -} - -static void __init szmem(unsigned int node) -{ - u32 i, mem_type; - static unsigned long num_physpages = 0; - u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size; - - /* Parse memory information and activate */ - for (i = 0; i < loongson_memmap->nr_map; i++) { - node_id = loongson_memmap->map[i].node_id; - if (node_id != node) - continue; - - mem_type = loongson_memmap->map[i].mem_type; - mem_size = loongson_memmap->map[i].mem_size; - mem_start = loongson_memmap->map[i].mem_start; - - switch (mem_type) { - case SYSTEM_RAM_LOW: - start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT; - node_psize = (mem_size << 20) >> PAGE_SHIFT; - end_pfn = start_pfn + node_psize; - num_physpages += node_psize; - pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", - (u32)node_id, mem_type, mem_start, mem_size); - pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", - start_pfn, end_pfn, num_physpages); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RAM); - memblock_add_node(PFN_PHYS(start_pfn), - PFN_PHYS(end_pfn - start_pfn), node); - break; - case SYSTEM_RAM_HIGH: - start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT; - node_psize = (mem_size << 20) >> PAGE_SHIFT; - end_pfn = start_pfn + node_psize; - num_physpages += node_psize; - pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", - (u32)node_id, mem_type, mem_start, mem_size); - pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", - start_pfn, end_pfn, num_physpages); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RAM); - memblock_add_node(PFN_PHYS(start_pfn), - PFN_PHYS(end_pfn - start_pfn), node); - break; - case MEM_RESERVED: - pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", - (u32)node_id, mem_type, mem_start, mem_size); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RESERVED); - memblock_reserve(((node_id << 44) + mem_start), - mem_size << 20); - break; - } - } -} - -static void __init node_mem_init(unsigned int node) -{ - unsigned long bootmap_size; - unsigned long node_addrspace_offset; - unsigned long start_pfn, end_pfn, freepfn; - - node_addrspace_offset = nid_to_addroffset(node); - pr_info("Node%d's addrspace_offset is 0x%lx\n", - node, node_addrspace_offset); - - get_pfn_range_for_nid(node, &start_pfn, &end_pfn); - freepfn = start_pfn; - if (node == 0) - freepfn = PFN_UP(__pa_symbol(&_end)); /* kernel end address */ - pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx, freepfn=0x%lx\n", - node, start_pfn, end_pfn, freepfn); - - __node_data[node] = prealloc__node_data + node; - - NODE_DATA(node)->bdata = &bootmem_node_data[node]; - NODE_DATA(node)->node_start_pfn = start_pfn; - NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn; - - bootmap_size = init_bootmem_node(NODE_DATA(node), freepfn, - start_pfn, end_pfn); - free_bootmem_with_active_regions(node, end_pfn); - if (node == 0) /* used by finalize_initrd() */ - max_low_pfn = end_pfn; - - /* This is reserved for the kernel and bdata->node_bootmem_map */ - reserve_bootmem_node(NODE_DATA(node), start_pfn << PAGE_SHIFT, - ((freepfn - start_pfn) << PAGE_SHIFT) + bootmap_size, - BOOTMEM_DEFAULT); - - if (node == 0 && node_end_pfn(0) >= (0xffffffff >> PAGE_SHIFT)) { - /* Reserve 0xff800000~0xffffffff for RS780E integrated GPU */ - reserve_bootmem_node(NODE_DATA(node), - (node_addrspace_offset | 0xff800000), - 8 << 20, BOOTMEM_DEFAULT); - } - - sparse_memory_present_with_active_regions(node); -} - -static __init void prom_meminit(void) -{ - unsigned int node, cpu, active_cpu = 0; - - cpu_node_probe(); - init_topology_matrix(); - - for (node = 0; node < loongson_sysconf.nr_nodes; node++) { - if (node_online(node)) { - szmem(node); - node_mem_init(node); - cpumask_clear(&__node_data[(node)]->cpumask); - } - } - for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) { - node = cpu / loongson_sysconf.cores_per_node; - if (node >= num_online_nodes()) - node = 0; - - if (loongson_sysconf.reserved_cpus_mask & (1<<cpu)) - continue; - - cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask); - pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node); - - active_cpu++; - } -} - -void __init paging_init(void) -{ - unsigned node; - unsigned long zones_size[MAX_NR_ZONES] = {0, }; - - pagetable_init(); - - for_each_online_node(node) { - unsigned long start_pfn, end_pfn; - - get_pfn_range_for_nid(node, &start_pfn, &end_pfn); - - if (end_pfn > max_low_pfn) - max_low_pfn = end_pfn; - } -#ifdef CONFIG_ZONE_DMA32 - zones_size[ZONE_DMA32] = MAX_DMA32_PFN; -#endif - zones_size[ZONE_NORMAL] = max_low_pfn; - free_area_init_nodes(zones_size); -} - -void __init mem_init(void) -{ - high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT); - free_all_bootmem(); - setup_zero_pages(); /* This comes from node 0 */ - mem_init_print_info(NULL); -} - -/* All PCI device belongs to logical Node-0 */ -int pcibus_to_node(struct pci_bus *bus) -{ - return 0; -} -EXPORT_SYMBOL(pcibus_to_node); - -void __init prom_init_numa_memory(void) -{ - enable_lpa(); - prom_meminit(); -} -EXPORT_SYMBOL(prom_init_numa_memory); diff --git a/kernel/arch/mips/loongson/loongson-3/platform.c b/kernel/arch/mips/loongson/loongson-3/platform.c deleted file mode 100644 index 25a97cc0e..000000000 --- a/kernel/arch/mips/loongson/loongson-3/platform.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * Xiang Yu, xiangy@lemote.com - * Chen Huacai, chenhc@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <asm/bootinfo.h> -#include <boot_param.h> -#include <loongson_hwmon.h> -#include <workarounds.h> - -static int __init loongson3_platform_init(void) -{ - int i; - struct platform_device *pdev; - - if (loongson_sysconf.ecname[0] != '\0') - platform_device_register_simple(loongson_sysconf.ecname, -1, NULL, 0); - - for (i = 0; i < loongson_sysconf.nr_sensors; i++) { - if (loongson_sysconf.sensors[i].type > SENSOR_FAN) - continue; - - pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); - pdev->name = loongson_sysconf.sensors[i].name; - pdev->id = loongson_sysconf.sensors[i].id; - pdev->dev.platform_data = &loongson_sysconf.sensors[i]; - platform_device_register(pdev); - } - - return 0; -} - -arch_initcall(loongson3_platform_init); diff --git a/kernel/arch/mips/loongson/loongson-3/smp.c b/kernel/arch/mips/loongson/loongson-3/smp.c deleted file mode 100644 index 509877c6e..000000000 --- a/kernel/arch/mips/loongson/loongson-3/smp.c +++ /dev/null @@ -1,652 +0,0 @@ -/* - * Copyright (C) 2010, 2011, 2012, Lemote, Inc. - * Author: Chen Huacai, chenhc@lemote.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/cpu.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <asm/processor.h> -#include <asm/time.h> -#include <asm/clock.h> -#include <asm/tlbflush.h> -#include <asm/cacheflush.h> -#include <loongson.h> -#include <workarounds.h> - -#include "smp.h" - -DEFINE_PER_CPU(int, cpu_state); -DEFINE_PER_CPU(uint32_t, core0_c0count); - -static void *ipi_set0_regs[16]; -static void *ipi_clear0_regs[16]; -static void *ipi_status0_regs[16]; -static void *ipi_en0_regs[16]; -static void *ipi_mailbox_buf[16]; - -/* read a 32bit value from ipi register */ -#define loongson3_ipi_read32(addr) readl(addr) -/* read a 64bit value from ipi register */ -#define loongson3_ipi_read64(addr) readq(addr) -/* write a 32bit value to ipi register */ -#define loongson3_ipi_write32(action, addr) \ - do { \ - writel(action, addr); \ - __wbflush(); \ - } while (0) -/* write a 64bit value to ipi register */ -#define loongson3_ipi_write64(action, addr) \ - do { \ - writeq(action, addr); \ - __wbflush(); \ - } while (0) - -static void ipi_set0_regs_init(void) -{ - ipi_set0_regs[0] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0); - ipi_set0_regs[1] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0); - ipi_set0_regs[2] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0); - ipi_set0_regs[3] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0); - ipi_set0_regs[4] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0); - ipi_set0_regs[5] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0); - ipi_set0_regs[6] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0); - ipi_set0_regs[7] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0); - ipi_set0_regs[8] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0); - ipi_set0_regs[9] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0); - ipi_set0_regs[10] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0); - ipi_set0_regs[11] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0); - ipi_set0_regs[12] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0); - ipi_set0_regs[13] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0); - ipi_set0_regs[14] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0); - ipi_set0_regs[15] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0); -} - -static void ipi_clear0_regs_init(void) -{ - ipi_clear0_regs[0] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0); - ipi_clear0_regs[1] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0); - ipi_clear0_regs[2] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0); - ipi_clear0_regs[3] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0); - ipi_clear0_regs[4] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0); - ipi_clear0_regs[5] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0); - ipi_clear0_regs[6] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0); - ipi_clear0_regs[7] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0); - ipi_clear0_regs[8] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0); - ipi_clear0_regs[9] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0); - ipi_clear0_regs[10] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0); - ipi_clear0_regs[11] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0); - ipi_clear0_regs[12] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0); - ipi_clear0_regs[13] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0); - ipi_clear0_regs[14] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0); - ipi_clear0_regs[15] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0); -} - -static void ipi_status0_regs_init(void) -{ - ipi_status0_regs[0] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0); - ipi_status0_regs[1] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0); - ipi_status0_regs[2] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0); - ipi_status0_regs[3] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0); - ipi_status0_regs[4] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0); - ipi_status0_regs[5] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0); - ipi_status0_regs[6] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0); - ipi_status0_regs[7] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0); - ipi_status0_regs[8] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0); - ipi_status0_regs[9] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0); - ipi_status0_regs[10] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0); - ipi_status0_regs[11] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0); - ipi_status0_regs[12] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0); - ipi_status0_regs[13] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0); - ipi_status0_regs[14] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0); - ipi_status0_regs[15] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0); -} - -static void ipi_en0_regs_init(void) -{ - ipi_en0_regs[0] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0); - ipi_en0_regs[1] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0); - ipi_en0_regs[2] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0); - ipi_en0_regs[3] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0); - ipi_en0_regs[4] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0); - ipi_en0_regs[5] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0); - ipi_en0_regs[6] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0); - ipi_en0_regs[7] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0); - ipi_en0_regs[8] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0); - ipi_en0_regs[9] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0); - ipi_en0_regs[10] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0); - ipi_en0_regs[11] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0); - ipi_en0_regs[12] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0); - ipi_en0_regs[13] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0); - ipi_en0_regs[14] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0); - ipi_en0_regs[15] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0); -} - -static void ipi_mailbox_buf_init(void) -{ - ipi_mailbox_buf[0] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF); - ipi_mailbox_buf[1] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF); - ipi_mailbox_buf[2] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF); - ipi_mailbox_buf[3] = (void *) - (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF); - ipi_mailbox_buf[4] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF); - ipi_mailbox_buf[5] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF); - ipi_mailbox_buf[6] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF); - ipi_mailbox_buf[7] = (void *) - (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF); - ipi_mailbox_buf[8] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF); - ipi_mailbox_buf[9] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF); - ipi_mailbox_buf[10] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF); - ipi_mailbox_buf[11] = (void *) - (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF); - ipi_mailbox_buf[12] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF); - ipi_mailbox_buf[13] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF); - ipi_mailbox_buf[14] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF); - ipi_mailbox_buf[15] = (void *) - (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF); -} - -/* - * Simple enough, just poke the appropriate ipi register - */ -static void loongson3_send_ipi_single(int cpu, unsigned int action) -{ - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]); -} - -static void -loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) -{ - unsigned int i; - - for_each_cpu(i, mask) - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]); -} - -void loongson3_ipi_interrupt(struct pt_regs *regs) -{ - int i, cpu = smp_processor_id(); - unsigned int action, c0count; - - /* Load the ipi register to figure out what we're supposed to do */ - action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); - - /* Clear the ipi register to clear the interrupt */ - loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]); - - if (action & SMP_RESCHEDULE_YOURSELF) - scheduler_ipi(); - - if (action & SMP_CALL_FUNCTION) - smp_call_function_interrupt(); - - if (action & SMP_ASK_C0COUNT) { - BUG_ON(cpu != 0); - c0count = read_c0_count(); - for (i = 1; i < num_possible_cpus(); i++) - per_cpu(core0_c0count, i) = c0count; - } -} - -#define MAX_LOOPS 1111 -/* - * SMP init and finish on secondary CPUs - */ -static void loongson3_init_secondary(void) -{ - int i; - uint32_t initcount; - unsigned int cpu = smp_processor_id(); - unsigned int imask = STATUSF_IP7 | STATUSF_IP6 | - STATUSF_IP3 | STATUSF_IP2; - - /* Set interrupt mask, but don't enable */ - change_c0_status(ST0_IM, imask); - - for (i = 0; i < num_possible_cpus(); i++) - loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(i)]); - - per_cpu(cpu_state, cpu) = CPU_ONLINE; - cpu_data[cpu].core = - cpu_logical_map(cpu) % loongson_sysconf.cores_per_package; - cpu_data[cpu].package = - cpu_logical_map(cpu) / loongson_sysconf.cores_per_package; - - i = 0; - __this_cpu_write(core0_c0count, 0); - loongson3_send_ipi_single(0, SMP_ASK_C0COUNT); - while (!__this_cpu_read(core0_c0count)) { - i++; - cpu_relax(); - } - - if (i > MAX_LOOPS) - i = MAX_LOOPS; - initcount = __this_cpu_read(core0_c0count) + i; - write_c0_count(initcount); -} - -static void loongson3_smp_finish(void) -{ - int cpu = smp_processor_id(); - - write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); - local_irq_enable(); - loongson3_ipi_write64(0, - (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0)); - pr_info("CPU#%d finished, CP0_ST=%x\n", - smp_processor_id(), read_c0_status()); -} - -static void __init loongson3_smp_setup(void) -{ - int i = 0, num = 0; /* i: physical id, num: logical id */ - - init_cpu_possible(cpu_none_mask); - - /* For unified kernel, NR_CPUS is the maximum possible value, - * loongson_sysconf.nr_cpus is the really present value */ - while (i < loongson_sysconf.nr_cpus) { - if (loongson_sysconf.reserved_cpus_mask & (1<<i)) { - /* Reserved physical CPU cores */ - __cpu_number_map[i] = -1; - } else { - __cpu_number_map[i] = num; - __cpu_logical_map[num] = i; - set_cpu_possible(num, true); - num++; - } - i++; - } - pr_info("Detected %i available CPU(s)\n", num); - - while (num < loongson_sysconf.nr_cpus) { - __cpu_logical_map[num] = -1; - num++; - } - - ipi_set0_regs_init(); - ipi_clear0_regs_init(); - ipi_status0_regs_init(); - ipi_en0_regs_init(); - ipi_mailbox_buf_init(); - cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package; - cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package; -} - -static void __init loongson3_prepare_cpus(unsigned int max_cpus) -{ - init_cpu_present(cpu_possible_mask); - per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; -} - -/* - * Setup the PC, SP, and GP of a secondary processor and start it runing! - */ -static void loongson3_boot_secondary(int cpu, struct task_struct *idle) -{ - unsigned long startargs[4]; - - pr_info("Booting CPU#%d...\n", cpu); - - /* startargs[] are initial PC, SP and GP for secondary CPU */ - startargs[0] = (unsigned long)&smp_bootstrap; - startargs[1] = (unsigned long)__KSTK_TOS(idle); - startargs[2] = (unsigned long)task_thread_info(idle); - startargs[3] = 0; - - pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n", - cpu, startargs[0], startargs[1], startargs[2]); - - loongson3_ipi_write64(startargs[3], - (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x18)); - loongson3_ipi_write64(startargs[2], - (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x10)); - loongson3_ipi_write64(startargs[1], - (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x8)); - loongson3_ipi_write64(startargs[0], - (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0)); -} - -#ifdef CONFIG_HOTPLUG_CPU - -static int loongson3_cpu_disable(void) -{ - unsigned long flags; - unsigned int cpu = smp_processor_id(); - - if (cpu == 0) - return -EBUSY; - - set_cpu_online(cpu, false); - cpumask_clear_cpu(cpu, &cpu_callin_map); - local_irq_save(flags); - fixup_irqs(); - local_irq_restore(flags); - flush_cache_all(); - local_flush_tlb_all(); - - return 0; -} - - -static void loongson3_cpu_die(unsigned int cpu) -{ - while (per_cpu(cpu_state, cpu) != CPU_DEAD) - cpu_relax(); - - mb(); -} - -/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and - * flush all L1 entries at first. Then, another core (usually Core 0) can - * safely disable the clock of the target core. loongson3_play_dead() is - * called via CKSEG1 (uncached and unmmaped) */ -static void loongson3a_play_dead(int *state_addr) -{ - register int val; - register long cpuid, core, node, count; - register void *addr, *base, *initfunc; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " li %[addr], 0x80000000 \n" /* KSEG0 */ - "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ - " cache 0, 1(%[addr]) \n" - " cache 0, 2(%[addr]) \n" - " cache 0, 3(%[addr]) \n" - " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ - " cache 1, 1(%[addr]) \n" - " cache 1, 2(%[addr]) \n" - " cache 1, 3(%[addr]) \n" - " addiu %[sets], %[sets], -1 \n" - " bnez %[sets], 1b \n" - " addiu %[addr], %[addr], 0x20 \n" - " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ - " sw %[val], (%[state_addr]) \n" - " sync \n" - " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ - " .set pop \n" - : [addr] "=&r" (addr), [val] "=&r" (val) - : [state_addr] "r" (state_addr), - [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set mips64 \n" - " mfc0 %[cpuid], $15, 1 \n" - " andi %[cpuid], 0x3ff \n" - " dli %[base], 0x900000003ff01000 \n" - " andi %[core], %[cpuid], 0x3 \n" - " sll %[core], 8 \n" /* get core id */ - " or %[base], %[base], %[core] \n" - " andi %[node], %[cpuid], 0xc \n" - " dsll %[node], 42 \n" /* get node id */ - " or %[base], %[base], %[node] \n" - "1: li %[count], 0x100 \n" /* wait for init loop */ - "2: bnez %[count], 2b \n" /* limit mailbox access */ - " addiu %[count], -1 \n" - " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ - " beqz %[initfunc], 1b \n" - " nop \n" - " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ - " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ - " ld $a1, 0x38(%[base]) \n" - " jr %[initfunc] \n" /* jump to initial PC */ - " nop \n" - " .set pop \n" - : [core] "=&r" (core), [node] "=&r" (node), - [base] "=&r" (base), [cpuid] "=&r" (cpuid), - [count] "=&r" (count), [initfunc] "=&r" (initfunc) - : /* No Input */ - : "a1"); -} - -static void loongson3b_play_dead(int *state_addr) -{ - register int val; - register long cpuid, core, node, count; - register void *addr, *base, *initfunc; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " li %[addr], 0x80000000 \n" /* KSEG0 */ - "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ - " cache 0, 1(%[addr]) \n" - " cache 0, 2(%[addr]) \n" - " cache 0, 3(%[addr]) \n" - " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ - " cache 1, 1(%[addr]) \n" - " cache 1, 2(%[addr]) \n" - " cache 1, 3(%[addr]) \n" - " addiu %[sets], %[sets], -1 \n" - " bnez %[sets], 1b \n" - " addiu %[addr], %[addr], 0x20 \n" - " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ - " sw %[val], (%[state_addr]) \n" - " sync \n" - " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ - " .set pop \n" - : [addr] "=&r" (addr), [val] "=&r" (val) - : [state_addr] "r" (state_addr), - [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set mips64 \n" - " mfc0 %[cpuid], $15, 1 \n" - " andi %[cpuid], 0x3ff \n" - " dli %[base], 0x900000003ff01000 \n" - " andi %[core], %[cpuid], 0x3 \n" - " sll %[core], 8 \n" /* get core id */ - " or %[base], %[base], %[core] \n" - " andi %[node], %[cpuid], 0xc \n" - " dsll %[node], 42 \n" /* get node id */ - " or %[base], %[base], %[node] \n" - " dsrl %[node], 30 \n" /* 15:14 */ - " or %[base], %[base], %[node] \n" - "1: li %[count], 0x100 \n" /* wait for init loop */ - "2: bnez %[count], 2b \n" /* limit mailbox access */ - " addiu %[count], -1 \n" - " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ - " beqz %[initfunc], 1b \n" - " nop \n" - " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ - " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ - " ld $a1, 0x38(%[base]) \n" - " jr %[initfunc] \n" /* jump to initial PC */ - " nop \n" - " .set pop \n" - : [core] "=&r" (core), [node] "=&r" (node), - [base] "=&r" (base), [cpuid] "=&r" (cpuid), - [count] "=&r" (count), [initfunc] "=&r" (initfunc) - : /* No Input */ - : "a1"); -} - -void play_dead(void) -{ - int *state_addr; - unsigned int cpu = smp_processor_id(); - void (*play_dead_at_ckseg1)(int *); - - idle_task_exit(); - switch (loongson_sysconf.cputype) { - case Loongson_3A: - default: - play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3a_play_dead); - break; - case Loongson_3B: - play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead); - break; - } - state_addr = &per_cpu(cpu_state, cpu); - mb(); - play_dead_at_ckseg1(state_addr); -} - -void loongson3_disable_clock(int cpu) -{ - uint64_t core_id = cpu_data[cpu].core; - uint64_t package_id = cpu_data[cpu].package; - - if (loongson_sysconf.cputype == Loongson_3A) { - LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id)); - } else if (loongson_sysconf.cputype == Loongson_3B) { - if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG)) - LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3)); - } -} - -void loongson3_enable_clock(int cpu) -{ - uint64_t core_id = cpu_data[cpu].core; - uint64_t package_id = cpu_data[cpu].package; - - if (loongson_sysconf.cputype == Loongson_3A) { - LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id); - } else if (loongson_sysconf.cputype == Loongson_3B) { - if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG)) - LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3); - } -} - -#define CPU_POST_DEAD_FROZEN (CPU_POST_DEAD | CPU_TASKS_FROZEN) -static int loongson3_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned long)hcpu; - - switch (action) { - case CPU_POST_DEAD: - case CPU_POST_DEAD_FROZEN: - pr_info("Disable clock for CPU#%d\n", cpu); - loongson3_disable_clock(cpu); - break; - case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: - pr_info("Enable clock for CPU#%d\n", cpu); - loongson3_enable_clock(cpu); - break; - } - - return NOTIFY_OK; -} - -static int register_loongson3_notifier(void) -{ - hotcpu_notifier(loongson3_cpu_callback, 0); - return 0; -} -early_initcall(register_loongson3_notifier); - -#endif - -struct plat_smp_ops loongson3_smp_ops = { - .send_ipi_single = loongson3_send_ipi_single, - .send_ipi_mask = loongson3_send_ipi_mask, - .init_secondary = loongson3_init_secondary, - .smp_finish = loongson3_smp_finish, - .boot_secondary = loongson3_boot_secondary, - .smp_setup = loongson3_smp_setup, - .prepare_cpus = loongson3_prepare_cpus, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_disable = loongson3_cpu_disable, - .cpu_die = loongson3_cpu_die, -#endif -}; diff --git a/kernel/arch/mips/loongson/loongson-3/smp.h b/kernel/arch/mips/loongson/loongson-3/smp.h deleted file mode 100644 index d98ff654b..000000000 --- a/kernel/arch/mips/loongson/loongson-3/smp.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __LOONGSON_SMP_H_ -#define __LOONGSON_SMP_H_ - -/* for Loongson-3 smp support */ -extern unsigned long long smp_group[4]; - -/* 4 groups(nodes) in maximum in numa case */ -#define SMP_CORE_GROUP0_BASE (smp_group[0]) -#define SMP_CORE_GROUP1_BASE (smp_group[1]) -#define SMP_CORE_GROUP2_BASE (smp_group[2]) -#define SMP_CORE_GROUP3_BASE (smp_group[3]) - -/* 4 cores in each group(node) */ -#define SMP_CORE0_OFFSET 0x000 -#define SMP_CORE1_OFFSET 0x100 -#define SMP_CORE2_OFFSET 0x200 -#define SMP_CORE3_OFFSET 0x300 - -/* ipi registers offsets */ -#define STATUS0 0x00 -#define EN0 0x04 -#define SET0 0x08 -#define CLEAR0 0x0c -#define STATUS1 0x10 -#define MASK1 0x14 -#define SET1 0x18 -#define CLEAR1 0x1c -#define BUF 0x20 - -#endif |