1 files changed, 0 insertions, 257 deletions

diff --git a/kernel/arch/mips/loongson/loongson-3/hpet.c b/kernel/arch/mips/loongson/loongson-3/hpet.c
deleted file mode 100644
index 5c21cd3bd..000000000
--- a/kernel/arch/mips/loongson/loongson-3/hpet.c
+++ /dev/null
@@ -1,257 +0,0 @@
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/percpu.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-
-#include <asm/hpet.h>
-#include <asm/time.h>
-
-#define SMBUS_CFG_BASE		(loongson_sysconf.ht_control_base + 0x0300a000)
-#define SMBUS_PCI_REG40		0x40
-#define SMBUS_PCI_REG64		0x64
-#define SMBUS_PCI_REGB4		0xb4
-
-static DEFINE_SPINLOCK(hpet_lock);
-DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device);
-
-static unsigned int smbus_read(int offset)
-{
-	return *(volatile unsigned int *)(SMBUS_CFG_BASE + offset);
-}
-
-static void smbus_write(int offset, int data)
-{
-	*(volatile unsigned int *)(SMBUS_CFG_BASE + offset) = data;
-}
-
-static void smbus_enable(int offset, int bit)
-{
-	unsigned int cfg = smbus_read(offset);
-
-	cfg |= bit;
-	smbus_write(offset, cfg);
-}
-
-static int hpet_read(int offset)
-{
-	return *(volatile unsigned int *)(HPET_MMIO_ADDR + offset);
-}
-
-static void hpet_write(int offset, int data)
-{
-	*(volatile unsigned int *)(HPET_MMIO_ADDR + offset) = data;
-}
-
-static void hpet_start_counter(void)
-{
-	unsigned int cfg = hpet_read(HPET_CFG);
-
-	cfg |= HPET_CFG_ENABLE;
-	hpet_write(HPET_CFG, cfg);
-}
-
-static void hpet_stop_counter(void)
-{
-	unsigned int cfg = hpet_read(HPET_CFG);
-
-	cfg &= ~HPET_CFG_ENABLE;
-	hpet_write(HPET_CFG, cfg);
-}
-
-static void hpet_reset_counter(void)
-{
-	hpet_write(HPET_COUNTER, 0);
-	hpet_write(HPET_COUNTER + 4, 0);
-}
-
-static void hpet_restart_counter(void)
-{
-	hpet_stop_counter();
-	hpet_reset_counter();
-	hpet_start_counter();
-}
-
-static void hpet_enable_legacy_int(void)
-{
-	/* Do nothing on Loongson-3 */
-}
-
-static void hpet_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	int cfg = 0;
-
-	spin_lock(&hpet_lock);
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		pr_info("set clock event to periodic mode!\n");
-		/* stop counter */
-		hpet_stop_counter();
-
-		/* enables the timer0 to generate a periodic interrupt */
-		cfg = hpet_read(HPET_T0_CFG);
-		cfg &= ~HPET_TN_LEVEL;
-		cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
-				HPET_TN_SETVAL | HPET_TN_32BIT;
-		hpet_write(HPET_T0_CFG, cfg);
-
-		/* set the comparator */
-		hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL);
-		udelay(1);
-		hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL);
-
-		/* start counter */
-		hpet_start_counter();
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		cfg = hpet_read(HPET_T0_CFG);
-		cfg &= ~HPET_TN_ENABLE;
-		hpet_write(HPET_T0_CFG, cfg);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		pr_info("set clock event to one shot mode!\n");
-		cfg = hpet_read(HPET_T0_CFG);
-		/* set timer0 type
-		 * 1 : periodic interrupt
-		 * 0 : non-periodic(oneshot) interrupt
-		 */
-		cfg &= ~HPET_TN_PERIODIC;
-		cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
-		hpet_write(HPET_T0_CFG, cfg);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		hpet_enable_legacy_int();
-		break;
-	}
-	spin_unlock(&hpet_lock);
-}
-
-static int hpet_next_event(unsigned long delta,
-		struct clock_event_device *evt)
-{
-	unsigned int cnt;
-	int res;
-
-	cnt = hpet_read(HPET_COUNTER);
-	cnt += delta;
-	hpet_write(HPET_T0_CMP, cnt);
-
-	res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0;
-	return res;
-}
-
-static irqreturn_t hpet_irq_handler(int irq, void *data)
-{
-	int is_irq;
-	struct clock_event_device *cd;
-	unsigned int cpu = smp_processor_id();
-
-	is_irq = hpet_read(HPET_STATUS);
-	if (is_irq & HPET_T0_IRS) {
-		/* clear the TIMER0 irq status register */
-		hpet_write(HPET_STATUS, HPET_T0_IRS);
-		cd = &per_cpu(hpet_clockevent_device, cpu);
-		cd->event_handler(cd);
-		return IRQ_HANDLED;
-	}
-	return IRQ_NONE;
-}
-
-static struct irqaction hpet_irq = {
-	.handler = hpet_irq_handler,
-	.flags = IRQF_NOBALANCING | IRQF_TIMER,
-	.name = "hpet",
-};
-
-/*
- * hpet address assignation and irq setting should be done in bios.
- * but pmon don't do this, we just setup here directly.
- * The operation under is normal. unfortunately, hpet_setup process
- * is before pci initialize.
- *
- * {
- *	struct pci_dev *pdev;
- *
- *	pdev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
- *	pci_write_config_word(pdev, SMBUS_PCI_REGB4, HPET_ADDR);
- *
- *	...
- * }
- */
-static void hpet_setup(void)
-{
-	/* set hpet base address */
-	smbus_write(SMBUS_PCI_REGB4, HPET_ADDR);
-
-	/* enable decodeing of access to HPET MMIO*/
-	smbus_enable(SMBUS_PCI_REG40, (1 << 28));
-
-	/* HPET irq enable */
-	smbus_enable(SMBUS_PCI_REG64, (1 << 10));
-
-	hpet_enable_legacy_int();
-}
-
-void __init setup_hpet_timer(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
-
-	hpet_setup();
-
-	cd = &per_cpu(hpet_clockevent_device, cpu);
-	cd->name = "hpet";
-	cd->rating = 320;
-	cd->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	cd->set_mode = hpet_set_mode;
-	cd->set_next_event = hpet_next_event;
-	cd->irq = HPET_T0_IRQ;
-	cd->cpumask = cpumask_of(cpu);
-	clockevent_set_clock(cd, HPET_FREQ);
-	cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns = 5000;
-
-	clockevents_register_device(cd);
-	setup_irq(HPET_T0_IRQ, &hpet_irq);
-	pr_info("hpet clock event device register\n");
-}
-
-static cycle_t hpet_read_counter(struct clocksource *cs)
-{
-	return (cycle_t)hpet_read(HPET_COUNTER);
-}
-
-static void hpet_suspend(struct clocksource *cs)
-{
-}
-
-static void hpet_resume(struct clocksource *cs)
-{
-	hpet_setup();
-	hpet_restart_counter();
-}
-
-static struct clocksource csrc_hpet = {
-	.name = "hpet",
-	/* mips clocksource rating is less than 300, so hpet is better. */
-	.rating = 300,
-	.read = hpet_read_counter,
-	.mask = CLOCKSOURCE_MASK(32),
-	/* oneshot mode work normal with this flag */
-	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
-	.suspend = hpet_suspend,
-	.resume = hpet_resume,
-	.mult = 0,
-	.shift = 10,
-};
-
-int __init init_hpet_clocksource(void)
-{
-	csrc_hpet.mult = clocksource_hz2mult(HPET_FREQ, csrc_hpet.shift);
-	return clocksource_register_hz(&csrc_hpet, HPET_FREQ);
-}
-
-arch_initcall(init_hpet_clocksource);